// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
 *
 * arch/arm/mach-mvebu/kirkwood.c
 *
 * Flattened Device Tree board initialization
 */

#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"

static struct resource kirkwood_cpufreq_resources[] = {
        [0] = {
                .start  = CPU_CONTROL_PHYS,
                .end    = CPU_CONTROL_PHYS + 3,
                .flags  = IORESOURCE_MEM,
        },
};

static struct platform_device kirkwood_cpufreq_device = {
        .name           = "kirkwood-cpufreq",
        .id             = -1,
        .num_resources  = ARRAY_SIZE(kirkwood_cpufreq_resources),
        .resource       = kirkwood_cpufreq_resources,
};

static void __init kirkwood_cpufreq_init(void)
{
        platform_device_register(&kirkwood_cpufreq_device);
}

static struct resource kirkwood_cpuidle_resource[] = {
        {
                .flags  = IORESOURCE_MEM,
                .start  = DDR_OPERATION_BASE,
                .end    = DDR_OPERATION_BASE + 3,
        },
};

static struct platform_device kirkwood_cpuidle = {
        .name           = "kirkwood_cpuidle",
        .id             = -1,
        .resource       = kirkwood_cpuidle_resource,
        .num_resources  = 1,
};

static void __init kirkwood_cpuidle_init(void)
{
        platform_device_register(&kirkwood_cpuidle);
}

#define MV643XX_ETH_MAC_ADDR_LOW        0x0414
#define MV643XX_ETH_MAC_ADDR_HIGH       0x0418

static void __init kirkwood_dt_eth_fixup(void)
{
        struct device_node *np;

        /*
         * The ethernet interfaces forget the MAC address assigned by u-boot
         * if the clocks are turned off. Usually, u-boot on kirkwood boards
         * has no DT support to properly set local-mac-address property.
         * As a workaround, we get the MAC address from mv643xx_eth registers
         * and update the port device node if no valid MAC address is set.
         */
        for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
                struct device_node *pnp = of_get_parent(np);
                struct clk *clk;
                struct property *pmac;
                u8 tmpmac[ETH_ALEN];
                void __iomem *io;
                u8 *macaddr;
                u32 reg;

                if (!pnp)
                        continue;

                /* skip disabled nodes or nodes with valid MAC address*/
                if (!of_device_is_available(pnp) ||
                    !of_get_mac_address(np, tmpmac))
                        goto eth_fixup_skip;

                clk = of_clk_get(pnp, 0);
                if (IS_ERR(clk))
                        goto eth_fixup_skip;

                io = of_iomap(pnp, 0);
                if (!io)
                        goto eth_fixup_no_map;

                /* ensure port clock is not gated to not hang CPU */
                clk_prepare_enable(clk);

                /* store MAC address register contents in local-mac-address */
                pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
                if (!pmac)
                        goto eth_fixup_no_mem;

                pmac->value = pmac + 1;
                pmac->length = 6;
                pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
                if (!pmac->name) {
                        kfree(pmac);
                        goto eth_fixup_no_mem;
                }

                macaddr = pmac->value;
                reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
                macaddr[0] = (reg >> 24) & 0xff;
                macaddr[1] = (reg >> 16) & 0xff;
                macaddr[2] = (reg >> 8) & 0xff;
                macaddr[3] = reg & 0xff;

                reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
                macaddr[4] = (reg >> 8) & 0xff;
                macaddr[5] = reg & 0xff;

                of_update_property(np, pmac);

eth_fixup_no_mem:
                iounmap(io);
                clk_disable_unprepare(clk);
eth_fixup_no_map:
                clk_put(clk);
eth_fixup_skip:
                of_node_put(pnp);
        }
}

/*
 * Disable propagation of mbus errors to the CPU local bus, as this
 * causes mbus errors (which can occur for example for PCI aborts) to
 * throw CPU aborts, which we're not set up to deal with.
 */
static void kirkwood_disable_mbus_error_propagation(void)
{
        void __iomem *cpu_config;

        cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
        writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
}

static struct of_dev_auxdata auxdata[] __initdata = {
        OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
                       "mvebu-audio", NULL),
        { /* sentinel */ }
};

static void __init kirkwood_dt_init(void)
{
        kirkwood_disable_mbus_error_propagation();

        BUG_ON(mvebu_mbus_dt_init(false));

#ifdef CONFIG_CACHE_FEROCEON_L2
        feroceon_of_init();
#endif
        kirkwood_cpufreq_init();
        kirkwood_cpuidle_init();

        kirkwood_pm_init();
        kirkwood_dt_eth_fixup();

        of_platform_default_populate(NULL, auxdata, NULL);
}

static const char * const kirkwood_dt_board_compat[] __initconst = {
        "marvell,kirkwood",
        NULL
};

DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
        /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
        .init_machine   = kirkwood_dt_init,
        .restart        = mvebu_restart,
        .dt_compat      = kirkwood_dt_board_compat,
MACHINE_END