/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SPINLOCK_H
#define __ASM_SPINLOCK_H

#if __LINUX_ARM_ARCH__ < 6
#error SMP not supported on pre-ARMv6 CPUs
#endif

#include <linux/prefetch.h>
#include <asm/barrier.h>
#include <asm/processor.h>

/*
 * sev and wfe are ARMv6K extensions.  Uniprocessor ARMv6 may not have the K
 * extensions, so when running on UP, we have to patch these instructions away.
 */
#ifdef CONFIG_THUMB2_KERNEL
/*
 * For Thumb-2, special care is needed to ensure that the conditional WFE
 * instruction really does assemble to exactly 4 bytes (as required by
 * the SMP_ON_UP fixup code).   By itself "wfene" might cause the
 * assembler to insert a extra (16-bit) IT instruction, depending on the
 * presence or absence of neighbouring conditional instructions.
 *
 * To avoid this unpredictability, an appropriate IT is inserted explicitly:
 * the assembler won't change IT instructions which are explicitly present
 * in the input.
 */
#define WFE(cond)       __ALT_SMP_ASM(          \
        "it " cond "\n\t"                       \
        "wfe" cond ".n",                        \
                                                \
        "nop.w"                                 \
)
#else
#define WFE(cond)       __ALT_SMP_ASM("wfe" cond, "nop")
#endif

#define SEV             __ALT_SMP_ASM(WASM(sev), WASM(nop))

static inline void dsb_sev(void)
{

        dsb(ishst);
        __asm__(SEV);
}

/*
 * ARMv6 ticket-based spin-locking.
 *
 * A memory barrier is required after we get a lock, and before we
 * release it, because V6 CPUs are assumed to have weakly ordered
 * memory.
 */

static inline void arch_spin_lock(arch_spinlock_t *lock)
{
        unsigned long tmp;
        u32 newval;
        arch_spinlock_t lockval;

        prefetchw(&lock->slock);
        __asm__ __volatile__(
"1:     ldrex   %0, [%3]\n"
"       add     %1, %0, %4\n"
"       strex   %2, %1, [%3]\n"
"       teq     %2, #0\n"
"       bne     1b"
        : "=&r" (lockval), "=&r" (newval), "=&r" (tmp)
        : "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
        : "cc");

        while (lockval.tickets.next != lockval.tickets.owner) {
                wfe();
                lockval.tickets.owner = READ_ONCE(lock->tickets.owner);
        }

        smp_mb();
}

static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
        unsigned long contended, res;
        u32 slock;

        prefetchw(&lock->slock);
        do {
                __asm__ __volatile__(
                "       ldrex   %0, [%3]\n"
                "       mov     %2, #0\n"
                "       subs    %1, %0, %0, ror #16\n"
                "       addeq   %0, %0, %4\n"
                "       strexeq %2, %0, [%3]"
                : "=&r" (slock), "=&r" (contended), "=&r" (res)
                : "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
                : "cc");
        } while (res);

        if (!contended) {
                smp_mb();
                return 1;
        } else {
                return 0;
        }
}

static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
        smp_mb();
        lock->tickets.owner++;
        dsb_sev();
}

static inline int arch_spin_value_unlocked(arch_spinlock_t lock)
{
        return lock.tickets.owner == lock.tickets.next;
}

static inline int arch_spin_is_locked(arch_spinlock_t *lock)
{
        return !arch_spin_value_unlocked(READ_ONCE(*lock));
}

static inline int arch_spin_is_contended(arch_spinlock_t *lock)
{
        struct __raw_tickets tickets = READ_ONCE(lock->tickets);
        return (tickets.next - tickets.owner) > 1;
}
#define arch_spin_is_contended  arch_spin_is_contended

/*
 * RWLOCKS
 *
 *
 * Write locks are easy - we just set bit 31.  When unlocking, we can
 * just write zero since the lock is exclusively held.
 */

static inline void arch_write_lock(arch_rwlock_t *rw)
{
        unsigned long tmp;

        prefetchw(&rw->lock);
        __asm__ __volatile__(
"1:     ldrex   %0, [%1]\n"
"       teq     %0, #0\n"
        WFE("ne")
"       strexeq %0, %2, [%1]\n"
"       teq     %0, #0\n"
"       bne     1b"
        : "=&r" (tmp)
        : "r" (&rw->lock), "r" (0x80000000)
        : "cc");

        smp_mb();
}

static inline int arch_write_trylock(arch_rwlock_t *rw)
{
        unsigned long contended, res;

        prefetchw(&rw->lock);
        do {
                __asm__ __volatile__(
                "       ldrex   %0, [%2]\n"
                "       mov     %1, #0\n"
                "       teq     %0, #0\n"
                "       strexeq %1, %3, [%2]"
                : "=&r" (contended), "=&r" (res)
                : "r" (&rw->lock), "r" (0x80000000)
                : "cc");
        } while (res);

        if (!contended) {
                smp_mb();
                return 1;
        } else {
                return 0;
        }
}

static inline void arch_write_unlock(arch_rwlock_t *rw)
{
        smp_mb();

        __asm__ __volatile__(
        "str    %1, [%0]\n"
        :
        : "r" (&rw->lock), "r" (0)
        : "cc");

        dsb_sev();
}

/*
 * Read locks are a bit more hairy:
 *  - Exclusively load the lock value.
 *  - Increment it.
 *  - Store new lock value if positive, and we still own this location.
 *    If the value is negative, we've already failed.
 *  - If we failed to store the value, we want a negative result.
 *  - If we failed, try again.
 * Unlocking is similarly hairy.  We may have multiple read locks
 * currently active.  However, we know we won't have any write
 * locks.
 */
static inline void arch_read_lock(arch_rwlock_t *rw)
{
        unsigned long tmp, tmp2;

        prefetchw(&rw->lock);
        __asm__ __volatile__(
"       .syntax unified\n"
"1:     ldrex   %0, [%2]\n"
"       adds    %0, %0, #1\n"
"       strexpl %1, %0, [%2]\n"
        WFE("mi")
"       rsbspl  %0, %1, #0\n"
"       bmi     1b"
        : "=&r" (tmp), "=&r" (tmp2)
        : "r" (&rw->lock)
        : "cc");

        smp_mb();
}

static inline void arch_read_unlock(arch_rwlock_t *rw)
{
        unsigned long tmp, tmp2;

        smp_mb();

        prefetchw(&rw->lock);
        __asm__ __volatile__(
"1:     ldrex   %0, [%2]\n"
"       sub     %0, %0, #1\n"
"       strex   %1, %0, [%2]\n"
"       teq     %1, #0\n"
"       bne     1b"
        : "=&r" (tmp), "=&r" (tmp2)
        : "r" (&rw->lock)
        : "cc");

        if (tmp == 0)
                dsb_sev();
}

static inline int arch_read_trylock(arch_rwlock_t *rw)
{
        unsigned long contended, res;

        prefetchw(&rw->lock);
        do {
                __asm__ __volatile__(
                "       ldrex   %0, [%2]\n"
                "       mov     %1, #0\n"
                "       adds    %0, %0, #1\n"
                "       strexpl %1, %0, [%2]"
                : "=&r" (contended), "=&r" (res)
                : "r" (&rw->lock)
                : "cc");
        } while (res);

        /* If the lock is negative, then it is already held for write. */
        if (contended < 0x80000000) {
                smp_mb();
                return 1;
        } else {
                return 0;
        }
}

#endif /* __ASM_SPINLOCK_H */