Symbol: ioc_info
drivers/scsi/mpi3mr/mpi3mr_app.c
2791
ioc_info(mrioc, "%s: bsg request timedout after %d seconds\n",
drivers/scsi/mpi3mr/mpi3mr_app.c
3220
ioc_info(mrioc, "logging_level=%08xh\n", mrioc->logging_level);
drivers/scsi/mpi3mr/mpi3mr_fw.c
1105
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
1365
ioc_info(mrioc, "Issuing Message unit Reset(MUR)\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
1367
ioc_info(mrioc, "IOC is unrecoverable MUR not issued\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
1400
ioc_info(mrioc, "Base IOC Sts/Config after %s MUR is (0x%08x)/(0x%08x)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
1478
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
1511
ioc_info(mrioc, "ioc_status(0x%08x), ioc_config(0x%08x), ioc_info(0x%016llx) at the bringup\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
1524
ioc_info(mrioc, "ready timeout: %d seconds\n", mrioc->ready_timeout);
drivers/scsi/mpi3mr/mpi3mr_fw.c
1527
ioc_info(mrioc, "controller is in %s state during detection\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
1549
ioc_info(mrioc, "issuing message unit reset (MUR) to bring to reset state\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
1581
ioc_info(mrioc, "issuing soft reset to bring to reset state\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
1606
ioc_info(mrioc, "bringing controller to ready state\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
1618
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
1643
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
1760
ioc_info(mrioc, "%s reset due to %s(0x%x)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
1766
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
1794
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
1843
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
211
ioc_info(mrioc, "Device Added: dev=0x%04x Form=0x%x\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
219
ioc_info(mrioc, "Device Info Changed: dev=0x%04x Form=0x%x\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
227
ioc_info(mrioc, "Device status Change: dev=0x%04x RC=0x%x\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
2282
ioc_info(mrioc, "create reply queue(polled): for qid(%d), midx(%d)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
235
ioc_info(mrioc, "SAS Discovery: (%s) status (0x%08x)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
2472
ioc_info(mrioc, "trying to create %d operational queue pairs\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
2491
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
2521
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
278
ioc_info(mrioc, "PCIE Enumeration: (%s)",
drivers/scsi/mpi3mr/mpi3mr_fw.c
282
ioc_info(mrioc, "enumeration_status(0x%08x)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
2830
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
297
ioc_info(mrioc, "%s\n", desc);
drivers/scsi/mpi3mr/mpi3mr_fw.c
3209
ioc_info(mrioc, "Changing DMA mask from 0x%016llx to 0x%016llx\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
3349
ioc_info(mrioc, "ioc_num(%d), maxopQ(%d), maxopRepQ(%d), maxdh(%d),",
drivers/scsi/mpi3mr/mpi3mr_fw.c
3352
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
3356
ioc_info(mrioc, "SGEModMask 0x%x SGEModVal 0x%x SGEModShift 0x%x ",
drivers/scsi/mpi3mr/mpi3mr_fw.c
3359
ioc_info(mrioc, "DMA mask %d InitialPE status 0x%x max_data_len (%d)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
3362
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
3365
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
3524
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
3529
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
3534
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
3539
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
3869
ioc_info(mrioc, "number of sgl entries=%d chain buffer size=%dKB\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
4141
ioc_info(mrioc, "Running in %s Personality", personality);
drivers/scsi/mpi3mr/mpi3mr_fw.c
4143
ioc_info(mrioc, "FW version(%d.%d.%d.%d.%d.%d)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
4168
ioc_info(mrioc, "Protocol=(%s), Capabilities=(%s)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
4280
ioc_info(mrioc, "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
4283
ioc_info(mrioc, "Number of MSI-X vectors found in capabilities: (%d)\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
4510
ioc_info(mrioc, "controller initialization completed successfully\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
4660
ioc_info(mrioc, "sending port enable\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
4700
ioc_info(mrioc, "port enable completed successfully\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
4702
ioc_info(mrioc, "controller %s completed successfully\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
5057
ioc_info(mrioc, "Issuing shutdown Notification\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
5066
ioc_info(mrioc, "shutdown already in progress\n");
drivers/scsi/mpi3mr/mpi3mr_fw.c
5099
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
5536
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
5542
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
5548
ioc_info(mrioc, "controller reset is triggered by %s\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
5701
ioc_info(mrioc, "controller reset is %s\n",
drivers/scsi/mpi3mr/mpi3mr_fw.c
807
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
811
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
856
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
859
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_fw.c
884
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1153
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1159
ioc_info(mrioc, "device_pg0: access_status(0x%02x), flags(0x%04x), device_form(0x%02x), queue_depth(%d)\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
1162
ioc_info(mrioc, "device_pg0: parent_handle(0x%04x), iounit_port(%d)\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
1171
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1185
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1190
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1202
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1209
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1383
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1385
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1470
ioc_info(mrioc, "%s :Unhandled reason code(0x%x)\n", __func__,
drivers/scsi/mpi3mr/mpi3mr_os.c
1667
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1671
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1766
ioc_info(mrioc, "%s :sas topology change: (%s)\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
1768
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1803
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1944
ioc_info(mrioc, "%s :pcie topology change: (%s)\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
1946
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
1982
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
2244
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
2382
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
2389
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
2401
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
2413
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
2545
ioc_info(mrioc, "%s :DevRmHs: tr:handle(0x%04x) is postponed\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
2553
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
3026
ioc_info(mrioc, "An active cable with receptacle_id %d cannot be powered.\n"
drivers/scsi/mpi3mr/mpi3mr_os.c
3035
ioc_info(mrioc, "A cable with receptacle_id %d is not running at optimal speed\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
3174
ioc_info(mrioc, "%s :event 0x%02x is not handled\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
3614
ioc_info(mrioc, "%s :scmd->result 0x%x\n", __func__,
drivers/scsi/mpi3mr/mpi3mr_os.c
3617
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
3621
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
3626
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
3950
ioc_info(mrioc, "%s :Issue TM: TM type (0x%x) for devhandle 0x%04x\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
4251
ioc_info(mrioc, "%s :Pending commands prior to reset: %d\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
4277
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
4290
ioc_info(mrioc, "%s :Pending I/Os after wait is: %d\n", __func__,
drivers/scsi/mpi3mr/mpi3mr_os.c
4655
ioc_info(mrioc, "%s :Issuing Port Enable\n", __func__);
drivers/scsi/mpi3mr/mpi3mr_os.c
4711
ioc_info(mrioc, "port enable is successfully completed\n");
drivers/scsi/mpi3mr/mpi3mr_os.c
502
ioc_info(mrioc, "%s :Host Tag = %d, qid = %d\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
5561
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
5710
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_os.c
5797
ioc_info(mrioc, "pdev=0x%p, slot=%s, entering operating state\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
5827
ioc_info(mrioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
5833
ioc_info(mrioc, "%s: Setup resources failed[%d]\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
627
ioc_info(mrioc, "%s :Flushing Host I/O cmds post reset\n", __func__);
drivers/scsi/mpi3mr/mpi3mr_os.c
630
ioc_info(mrioc, "%s :Flushed %d Host I/O cmds\n", __func__,
drivers/scsi/mpi3mr/mpi3mr_os.c
916
ioc_info(mrioc, "%s :Removing handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpi3mr/mpi3mr_os.c
945
ioc_info(mrioc, "%s :Removed handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpi3mr/mpi3mr_transport.c
1029
ioc_info(mrioc, "hba_port entry: %p, port: %d is added to hba_port list\n",
drivers/scsi/mpi3mr/mpi3mr_transport.c
1293
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_transport.c
1381
ioc_info(mrioc, "max port count %u could be too high\n",
drivers/scsi/mpi3mr/mpi3mr_transport.c
1563
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_transport.c
1601
ioc_info(mrioc, "%s: removed sas_address(0x%016llx)\n",
drivers/scsi/mpi3mr/mpi3mr_transport.c
1779
ioc_info(mrioc, "Host port details before reset\n");
drivers/scsi/mpi3mr/mpi3mr_transport.c
1782
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_transport.c
1789
ioc_info(mrioc, "Host port details after reset\n");
drivers/scsi/mpi3mr/mpi3mr_transport.c
1791
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_transport.c
2109
ioc_info(mrioc,
drivers/scsi/mpi3mr/mpi3mr_transport.c
2234
ioc_info(mrioc, "expander_remove: handle(0x%04x), sas_addr(0x%016llx), port:%d\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
1260
ioc_info(ioc, "Discovery: (%s)",
drivers/scsi/mpt3sas/mpt3sas_base.c
1316
ioc_info(ioc, "PCIE Enumeration: (%s)",
drivers/scsi/mpt3sas/mpt3sas_base.c
1333
ioc_info(ioc, "%s\n", desc);
drivers/scsi/mpt3sas/mpt3sas_base.c
1509
ioc_info(ioc, "DELAYED: EVENT ACK: event (0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
3066
ioc_info(ioc, "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
3095
dfailprintk(ioc, ioc_info(ioc, "msix not supported\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
3113
dinitprintk(ioc, ioc_info(ioc, "msix is supported, vector_count(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
3387
ioc_info(ioc, " %d %d %d\n", ioc->high_iops_queues,
drivers/scsi/mpt3sas/mpt3sas_base.c
3421
ioc_info(ioc, "MSI-X vectors supported: %d\n", ioc->msix_vector_count);
drivers/scsi/mpt3sas/mpt3sas_base.c
3442
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
3509
ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n", r);
drivers/scsi/mpt3sas/mpt3sas_base.c
3534
ioc_info(ioc, "High IOPs queues : %s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
3542
ioc_info(ioc, "High IOPs queues : disabled\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
3548
ioc_info(ioc, "pci_alloc_irq_vector(legacy) failed (r=%d) !!!\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
3565
dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
3642
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
3771
ioc_info(ioc, "iomem(%pap), mapped(0x%p), size(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
3773
ioc_info(ioc, "ioport(0x%016llx), size(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
419
ioc_info(ioc, "Provided chain_buffer_dma address is not in the lookup list\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
4445
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4449
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4453
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4457
ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4465
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4469
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4473
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4477
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4481
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4485
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4489
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4493
ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4501
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4506
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4510
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4514
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4518
ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4524
ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4534
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4538
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4542
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4546
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4550
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4554
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4558
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4562
ioc_info(ioc, "Dell 6Gbps HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4570
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4574
ioc_info(ioc, "Dell 12Gbps HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4580
ioc_info(ioc, "Dell HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4590
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4594
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4598
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4602
ioc_info(ioc, "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4610
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4614
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4618
ioc_info(ioc, "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4624
ioc_info(ioc, "Cisco SAS HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4634
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4638
ioc_info(ioc, "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4646
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4650
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4654
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4658
ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4662
ioc_info(ioc, "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4668
ioc_info(ioc, "HP SAS HBA: Subsystem ID: 0x%X\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4699
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
4737
ioc_info(ioc, "%s: complete\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_base.c
4765
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
4804
ioc_info(ioc, "%s: FWVersion(%02d.%02d.%02d.%02d), ChipRevision(0x%02x)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4819
ioc_info(ioc, "Protocol=(");
drivers/scsi/mpt3sas/mpt3sas_base.c
4977
ioc_info(ioc, "device_missing_delay: old(%d), new(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
4979
ioc_info(ioc, "ioc_missing_delay: old(%d), new(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
5014
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
5032
ioc_info(ioc, "performance mode: balanced\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
5047
ioc_info(ioc, "performance mode: latency\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
5053
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
5499
ioc_info(ioc, "Invalid ATTO NVRAM version");
drivers/scsi/mpt3sas/mpt3sas_base.c
5673
dinitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
5800
dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
5806
ioc_info(ioc, "request_pool(0x%p): free\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
5815
ioc_info(ioc, "sense_pool(0x%p): free\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
5824
ioc_info(ioc, "reply_pool(0x%p): free\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
5834
ioc_info(ioc, "reply_free_pool(0x%p): free\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
5850
dexitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
5885
ioc_info(ioc, "config_page(0x%p): free\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6012
dinitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6015
dinitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6059
dinitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6092
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6127
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6161
dinitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6164
dinitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6302
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
6442
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6484
ioc_info(ioc, "scsi host: can_queue depth (%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6531
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6541
ioc_info(ioc, "scsiio(0x%p): depth(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6570
ioc_info(ioc, "hi_priority(0x%p): depth(%d), start smid(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6583
ioc_info(ioc, "internal(0x%p): depth(%d), start smid(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6615
ioc_info(ioc, "PCIe SGL lookup: kzalloc failed\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
662
dinitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6635
ioc_info(ioc, "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6663
ioc_info(ioc, "reply_free_dma (0x%llx)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6684
ioc_info(ioc, "config page(0x%p) - dma(0x%llx): size(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6689
ioc_info(ioc, "Allocated physical memory: size(%d kB)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6691
ioc_info(ioc, "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6693
ioc_info(ioc, "Scatter Gather Elements per IO(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
675
dinitprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
6776
ioc_info(ioc, "System Register set:\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
6804
ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6830
ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6868
ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6915
ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
6953
ioc_info(ioc, "sending message unit reset !!\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
6990
ioc_info(ioc, "message unit reset: %s\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7027
ioc_info(ioc, "%s: waiting for operational state(count=%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7035
ioc_info(ioc, "ioc is operational\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
7140
ioc_info(ioc, "doorbell is in use (line=%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7149
ioc_info(ioc, "\t[0x%02x]:%08x\n", i*4,
drivers/scsi/mpt3sas/mpt3sas_base.c
7183
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
7264
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
7334
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
7373
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
7377
ioc_info(ioc, "%s: host in pci error recovery\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7384
ioc_info(ioc, "%s: ioc_state(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7392
dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
7402
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
7411
ioc_info(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7437
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
7442
ioc_info(ioc, "%s: failed getting to correct state\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7509
ioc_info(ioc, "CurrentHostPageSize is 0: Setting default host page size to 4k\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
7513
ioc_info(ioc, "CurrentHostPageSize(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7517
ioc_info(ioc, "hba queue depth(%d), max chains per io(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7520
ioc_info(ioc, "request frame size(%d), reply frame size(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
7542
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
7603
ioc_info(ioc, "\toffset:data\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
7605
ioc_info(ioc, "\t[0x%02x]:%08x\n", i*4,
drivers/scsi/mpt3sas/mpt3sas_base.c
7695
ioc_info(ioc, "sending port enable !!\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
7739
ioc_info(ioc, "port enable: %s\n", r == 0 ? "SUCCESS" : "FAILED");
drivers/scsi/mpt3sas/mpt3sas_base.c
7755
ioc_info(ioc, "sending port enable !!\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
776
ioc_info(ioc, "%s: CoreDump loop %d.",
drivers/scsi/mpt3sas/mpt3sas_base.c
7868
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
7903
dinitprintk(ioc, ioc_info(ioc, "%s: complete\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
7974
drsprintk(ioc, ioc_info(ioc, "write magic sequence\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
7987
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
7995
ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
8010
drsprintk(ioc, ioc_info(ioc, "disable writes to the diagnostic register\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
8028
ioc_info(ioc, "sending diag reset !!\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
8032
drsprintk(ioc, ioc_info(ioc, "clear interrupts\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
8039
drsprintk(ioc, ioc_info(ioc, "diag reset: issued\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
8053
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
8068
ioc_info(ioc, "restart the adapter assuming the\n"
drivers/scsi/mpt3sas/mpt3sas_base.c
8074
drsprintk(ioc, ioc_info(ioc, "re-enable the HCDW\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
8079
drsprintk(ioc, ioc_info(ioc, "restart the adapter\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
8086
drsprintk(ioc, ioc_info(ioc, "Wait for FW to go to the READY state\n"));
drivers/scsi/mpt3sas/mpt3sas_base.c
8096
ioc_info(ioc, "diag reset: SUCCESS\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
8122
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
8129
ioc_info(ioc, "%s: ioc_state(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_base.c
8151
ioc_info(ioc, "unexpected doorbell active!\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
8212
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
8386
dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
8414
dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
8424
ioc_info(ioc, "Allocation for cpu_msix_table failed!!!\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
8433
ioc_info(ioc, "Allocation for reply_post_host_index failed!!!\n");
drivers/scsi/mpt3sas/mpt3sas_base.c
8728
dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
8761
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
8772
ioc_info(ioc, "%s: clear outstanding mpt cmds\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
8822
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
8882
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
8894
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
8908
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
8921
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
8953
dtmprintk(ioc, ioc_info(ioc, "%s: enter\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
9008
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_base.c
9023
ioc_info(ioc, "%s: %s\n", __func__, r == 0 ? "SUCCESS" : "FAILED");
drivers/scsi/mpt3sas/mpt3sas_base.c
9040
dtmprintk(ioc, ioc_info(ioc, "%s: exit\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_base.c
931
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_config.c
175
ioc_info(ioc, "%s: %s(%d), action(%d), form(0x%08x), smid(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_config.c
184
ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_config.c
357
ioc_info(ioc, "%s: attempting retry (%d)\n",
drivers/scsi/mpt3sas/mpt3sas_config.c
443
ioc_info(ioc, "%s: retry (%d) completed!!\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1008
ioc_info(ioc, "Firmware download not supported for ATTO HBA.\n");
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1049
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1112
ioc_info(ioc, "TASK_MGMT: IOCStatus(0x%04x), IOCLogInfo(0x%08x), TerminationCount(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1147
ioc_info(ioc, "Response buffer provided by application is NULL; Response data will not be returned\n");
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1170
ioc_info(ioc, "issue target reset: handle = (0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1192
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1229
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1291
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1322
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1362
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1409
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1414
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1544
dctlprintk(ioc, ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1636
dctlprintk(ioc, ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1696
dctlprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1812
ioc_info(ioc, "%s: diag_buffer(0x%p), dma(0x%llx), sz(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1846
dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1848
ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1892
ioc_info(ioc, "registering trace buffer support\n");
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1951
ioc_info(ioc, "Trace buffer memory %d KB allocated\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1961
ioc_info(ioc, "registering snapshot buffer support\n");
drivers/scsi/mpt3sas/mpt3sas_ctl.c
197
ioc_info(ioc, "%s: %s, smid(%d)\n", calling_function_name, desc, smid);
drivers/scsi/mpt3sas/mpt3sas_ctl.c
1970
ioc_info(ioc, "registering extended buffer support\n");
drivers/scsi/mpt3sas/mpt3sas_ctl.c
203
ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2032
dctlprintk(ioc, ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2115
dctlprintk(ioc, ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2204
dctlprintk(ioc, ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2218
ioc_info(ioc, "%s: skipping due to FAULT state\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2275
dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2277
ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2312
dctlprintk(ioc, ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2402
dctlprintk(ioc, ioc_info(ioc, "%s\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
241
ioc_info(ioc, "\tscsi_state(0x%02x), scsi_status(0x%02x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2444
ioc_info(ioc, "%s: diag_buffer(%p), offset(%d), sz(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2466
ioc_info(ioc, "%s: Reregister buffer_type(0x%02x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2471
ioc_info(ioc, "%s: buffer_type(0x%02x) is still registered\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2537
dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2539
ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2575
dctlprintk(ioc, ioc_info(ioc, "%s\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2590
ioc_info(ioc, "%s: buffer_type(0x%02x) is not registered\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2656
ioc_info(ioc, "%s: Successfully set the Diag SBR Reload Bit\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_ctl.c
2842
ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
3438
ioc_info(ioc, "logging_level=%08xh\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
3474
ioc_info(ioc, "fwfault_debug=%d\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
3769
ioc_info(ioc, "posting host trace buffers\n");
drivers/scsi/mpt3sas/mpt3sas_ctl.c
3804
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_ctl.c
3822
ioc_info(ioc, "releasing host trace buffer\n");
drivers/scsi/mpt3sas/mpt3sas_ctl.c
470
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_ctl.c
482
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_ctl.c
500
ioc_info(ioc, "%s: clear outstanding ioctl cmd\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_ctl.c
518
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_ctl.c
633
ioc_info(ioc, "%s: handle(0x%04x), lun(%d), no active mid!!\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
652
ioc_info(ioc, "%s: handle(0x%04x), lun(%d), task_mid(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
854
dtmprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_ctl.c
886
ioc_info(ioc, "handle(0x%04x): ioctl failed due to device removal in progress\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
906
ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
926
ioc_info(ioc, "TASK_MGMT: handle(0x%04x), task_type(0x%02x)\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
944
ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
drivers/scsi/mpt3sas/mpt3sas_ctl.c
994
ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10011
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10023
ioc_info(ioc, "%s - exit, query_count = %d termination_count = %d\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10046
ioc_info(ioc, "discovery event: (%s)",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10114
ioc_info(ioc, "pcie enumeration event: (%s) Flag 0x%02x",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10172
ioc_info(ioc, "IR RAID_ACTION: turning fast path on for handle(0x%04x), phys_disk_num (0x%02x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10198
ioc_info(ioc, "IR RAID_ACTION: failed: ioc_status(0x%04x), loginfo(0x%08x)!!!\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10203
ioc_info(ioc, "IR RAID_ACTION: completed successfully\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10306
ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10490
ioc_info(ioc, "raid config change: (%s), elements(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10650
ioc_info(ioc, "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10733
ioc_info(ioc, "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10822
ioc_info(ioc, "raid operational status: (%s)\thandle(0x%04x), percent complete(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10897
ioc_info(ioc, "Update devices with firmware reported queue depth\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1091
ioc_info(ioc, "%s: handle(0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
10944
ioc_info(ioc, "Enclosure handle(0x%04x) doesn't match with enclosure device!\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11078
ioc_info(ioc, "search for end-devices: start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11099
ioc_info(ioc, "search for end-devices: complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11194
ioc_info(ioc, "search for end-devices: start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11206
ioc_info(ioc, "\tbreak from %s: ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11218
ioc_info(ioc, "search for PCIe end-devices: complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11299
ioc_info(ioc, "search for raid volumes: start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11342
ioc_info(ioc, "search for responding raid volumes: complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11419
ioc_info(ioc, "search for expanders: start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1143
ioc_info(ioc, "%s: handle(0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11445
ioc_info(ioc, "search for expanders: complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11463
ioc_info(ioc, "removing unresponding devices: start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11466
ioc_info(ioc, "removing unresponding devices: end-devices\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11501
ioc_info(ioc, "Removing unresponding devices: pcie end-devices\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11531
ioc_info(ioc, "removing unresponding devices: volumes\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11543
ioc_info(ioc, "removing unresponding devices: expanders\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11559
ioc_info(ioc, "removing unresponding devices: complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11614
ioc_info(ioc, "scan devices: start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11618
ioc_info(ioc, "\tscan devices: expanders start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11627
ioc_info(ioc, "\tbreak from expander scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11642
ioc_info(ioc, "\tBEFORE adding expander: handle (0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11646
ioc_info(ioc, "\tAFTER adding expander: handle (0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11652
ioc_info(ioc, "\tscan devices: expanders complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11657
ioc_info(ioc, "\tscan devices: phys disk start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11667
ioc_info(ioc, "\tbreak from phys disk scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11685
ioc_info(ioc, "\tbreak from phys disk scan ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11692
ioc_info(ioc, "\tBEFORE adding phys disk: handle (0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11710
ioc_info(ioc, "\tAFTER adding phys disk: handle (0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11716
ioc_info(ioc, "\tscan devices: phys disk complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11718
ioc_info(ioc, "\tscan devices: volumes start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11727
ioc_info(ioc, "\tbreak from volume scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11745
ioc_info(ioc, "\tbreak from volume scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11755
ioc_info(ioc, "\tBEFORE adding volume: handle (0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11758
ioc_info(ioc, "\tAFTER adding volume: handle (0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11763
ioc_info(ioc, "\tscan devices: volumes complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11767
ioc_info(ioc, "\tscan devices: end devices start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11777
ioc_info(ioc, "\tbreak from end device scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11795
ioc_info(ioc, "\tBEFORE adding end device: handle (0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11810
ioc_info(ioc, "\tAFTER adding end device: handle (0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11815
ioc_info(ioc, "\tscan devices: end devices complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11816
ioc_info(ioc, "\tscan devices: pcie end devices start\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11826
ioc_info(ioc, "\tbreak from pcie end device scan: ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11845
ioc_info(ioc, "\tAFTER adding pcie end device: handle (0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11849
ioc_info(ioc, "\tpcie devices: pcie end devices complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11850
ioc_info(ioc, "scan devices: complete\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11861
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11875
ioc_info(ioc, "%s: clear outstanding scsi & tm cmds\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11903
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
11981
ioc_info(ioc, "port enable: complete from worker thread\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
12327
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
12386
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
12399
ioc_info(ioc, "Io Unit Control shutdown (complete):"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
12455
ioc_info(ioc, "IR shutdown (sending)\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
12468
ioc_info(ioc, "IR shutdown (complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
12562
ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13038
ioc_info(ioc, "port enable: FAILED\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13084
ioc_info(ioc, "port enable: FAILED with timeout (timeout=300s)\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13108
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13114
ioc_info(ioc, "port enable: FAILED with (ioc_status=0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13122
ioc_info(ioc, "port enable: SUCCESS\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1321
ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1324
ioc_info(ioc, "removing enclosure logical id(0x%016llx), slot(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1328
ioc_info(ioc, "removing enclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13552
ioc_info(ioc, "The max_sectors value is set to %d\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13566
ioc_info(ioc, "The max_sectors value is set to %d\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13677
ioc_info(ioc, "pdev=0x%p, slot=%s, entering operating state\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13703
ioc_info(ioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13710
ioc_info(ioc, "Issuing Hard Reset as part of OS Resume\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13735
ioc_info(ioc, "PCI error: detected callback, state(%d)!!\n", state);
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13776
ioc_info(ioc, "PCI error: slot reset callback!!\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13785
ioc_info(ioc, "Issuing Hard Reset as part of PCI Slot Reset\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13814
ioc_info(ioc, "PCI error: resume callback!!\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
13833
ioc_info(ioc, "PCI error: mmio enabled callback!!\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1411
ioc_info(ioc, "%s: handle (0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1416
ioc_info(ioc, "%s: enclosure logical id(0x%016llx), slot( %d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1422
ioc_info(ioc, "%s: enclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1462
ioc_info(ioc, "%s: handle (0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1467
ioc_info(ioc, "%s: enclosure logical id(0x%016llx), slot( %d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1473
ioc_info(ioc, "%s: enclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
1578
ioc_info(ioc, "%s: handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3069
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3123
ioc_info(ioc, "%s: tm_cmd busy!!!\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3129
ioc_info(ioc, "%s: host reset in progress!\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3135
dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3160
ioc_info(ioc, "sending tm: handle(0x%04x), task_type(0x%02x), smid(%d), timeout(%d), tr_method(0x%x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3198
ioc_info(ioc, "complete tm: ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3228
ioc_info(ioc, "Task abort tm failed: handle(0x%04x),"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3596
ioc_info(ioc, "attempting host reset! scmd(0x%p)\n", scmd);
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3600
ioc_info(ioc, "Blocking the host reset\n");
drivers/scsi/mpt3sas/mpt3sas_scsih.c
3608
ioc_info(ioc, "host reset: %s scmd(0x%p)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4392
ioc_info(ioc, "%s: host in pci error recovery: handle(0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4399
ioc_info(ioc, "%s: host is not operational: handle(0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4440
ioc_info(ioc, "setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4445
ioc_info(ioc, "setting delete flag:enclosure logical id(0x%016llx), slot(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4450
ioc_info(ioc, "setting delete flag: enclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4456
ioc_info(ioc, "setting delete flag: logical id(0x%016llx), slot(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4461
ioc_info(ioc, "setting delete flag:, enclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4478
ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4484
ioc_info(ioc, "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4534
ioc_info(ioc, "%s: host in pci error recovery\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4541
ioc_info(ioc, "%s: host is not operational\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4562
ioc_info(ioc, "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x), completed(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4576
ioc_info(ioc, "DELAYED:sc:handle(0x%04x), (open)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4582
ioc_info(ioc, "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4653
ioc_info(ioc, "sc_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4688
ioc_info(ioc, "%s: host reset in progress!\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4702
ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4708
ioc_info(ioc, "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4740
ioc_info(ioc, "%s: host reset in progress!\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4761
ioc_info(ioc, "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), loginfo(0x%08x), completed(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4795
ioc_info(ioc, "EVENT ACK: event(0x%04x), smid(%d), cb(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4827
ioc_info(ioc, "%s: host has been removed\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4832
ioc_info(ioc, "%s: host in pci error recovery\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4839
ioc_info(ioc, "%s: host is not operational\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
484
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
4853
ioc_info(ioc, "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5016
ioc_info(ioc, "setting ignoring flag\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5088
ioc_info(ioc, "setting ignoring flag for switch event\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5118
ioc_info(ioc, "setting delete flag: handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5222
ioc_info(ioc, "DELAYED:tr:handle(0x%04x), (open)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5334
dtmprintk(ioc, ioc_info(ioc, "completing %d cmds\n", count));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5770
ioc_info(ioc, "\twwid(0x%016llx), port(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5773
ioc_info(ioc, "\tenclosure logical id(0x%016llx), slot(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5777
ioc_info(ioc, "\tenclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5854
ioc_info(ioc, "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
5893
ioc_info(ioc, "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6383
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6676
drsprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6707
drsprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
672
ioc_info(ioc, "%s: req_boot_device(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6731
drsprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6757
drsprintk(ioc, ioc_info(ioc, "New Port table\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6759
drsprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6767
drsprintk(ioc, ioc_info(ioc, "Old Port table\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6770
drsprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6781
drsprintk(ioc, ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6856
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
686
ioc_info(ioc, "%s: req_alt_boot_device(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6886
ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
6915
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
700
ioc_info(ioc, "%s: current_boot_device(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
7121
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
7159
ioc_info(ioc, "host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
7276
ioc_info(ioc, "expander_add: handle(0x%04x), parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
7799
ioc_info(ioc, "REPORT_LUNS: handle(0x%04x),\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8434
ioc_info(ioc, "Enclosure handle(0x%04x) doesn't match with enclosure device!\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8444
ioc_info(ioc, "detecting: handle(0x%04x),\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8451
dewtprintk(ioc, ioc_info(ioc, "%s:\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8460
dewtprintk(ioc, ioc_info(ioc, "%s:\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8469
ioc_info(ioc, "chassis slot(0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8538
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8570
ioc_info(ioc, "%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8592
ioc_info(ioc, "removing handle(0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8598
ioc_info(ioc, "%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8640
ioc_info(ioc, "sas topology change: (%s)\n", status_str);
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8721
dewtprintk(ioc, ioc_info(ioc, "ignoring expander event\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8753
ioc_info(ioc, "ignoring expander event\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8769
dewtprintk(ioc, ioc_info(ioc, "ignoring\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8776
dewtprintk(ioc, ioc_info(ioc, "ignoring Target not responding\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8824
dewtprintk(ioc, ioc_info(ioc, "handle(0x%04x) device not found: convert\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8925
ioc_info(ioc, "device status change: (%s)\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
8982
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9021
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9078
ioc_info(ioc, "NVMe discovery error(%s): wwid(0x%016llx), handle(0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9096
ioc_info(ioc, "%s: enter: handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9101
ioc_info(ioc, "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9107
ioc_info(ioc, "%s: enter: enclosure level(0x%04x), connector name(%s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9119
ioc_info(ioc, "removing handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9122
ioc_info(ioc, "removing : enclosure logical id(0x%016llx), slot(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9126
ioc_info(ioc, "removing: enclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9134
ioc_info(ioc, "%s: exit: handle(0x%04x), wwid(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9139
ioc_info(ioc, "%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9145
ioc_info(ioc, "%s: exit: enclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9219
ioc_info(ioc, "device is not present handle(0x%04x), flags!!!\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9351
ioc_info(ioc, "detecting: handle(0x%04x),\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9359
dewtprintk(ioc, ioc_info(ioc, "%s:\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9369
dewtprintk(ioc, ioc_info(ioc, "%s: device not ready: enclosure\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9493
ioc_info(ioc, "pcie topology change: (%s)\n", status_str);
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9567
dewtprintk(ioc, ioc_info(ioc, "ignoring switch event\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9575
ioc_info(ioc, "ignoring switch event\n"));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9621
ioc_info(ioc, "handle(0x%04x) device not found: convert event to a device add\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
970
ioc_info(ioc, "enclosure logical id(0x%016llx), slot(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9709
ioc_info(ioc, "PCIE device status change: (%s)\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
974
ioc_info(ioc, "enclosure level(0x%04x), connector name( %s)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
978
ioc_info(ioc, "chassis slot(0x%04x)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9795
ioc_info(ioc, "enclosure status change: (%s)\n"
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9837
ioc_info(ioc, "failure at %s:%d/%s()!\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9896
ioc_info(ioc, "%s: enter: phy number(%d), width(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9907
dewtprintk(ioc, ioc_info(ioc, "%s: giving up\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9911
ioc_info(ioc, "%s: %d retry\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
9980
ioc_info(ioc, "%s: ABORT_TASK: giving up\n",
drivers/scsi/mpt3sas/mpt3sas_scsih.c
999
ioc_info(ioc, "removing handle(0x%04x), sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1003
ioc_info(ioc, "%s: removed: sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1282
ioc_info(ioc, "%s: host reset in progress!\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_transport.c
1346
ioc_info(ioc, "phy_error_log - send to sas_addr(0x%016llx), phy(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1362
dtransportprintk(ioc, ioc_info(ioc, "phy_error_log - complete\n"));
drivers/scsi/mpt3sas/mpt3sas_transport.c
1369
ioc_info(ioc, "phy_error_log - reply data transfer size(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1380
ioc_info(ioc, "phy_error_log - function_result(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1394
ioc_info(ioc, "phy_error_log - no reply\n"));
drivers/scsi/mpt3sas/mpt3sas_transport.c
1446
ioc_info(ioc, "phy(%d), ioc_status (0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1573
ioc_info(ioc, "%s: host reset in progress!\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_transport.c
1642
ioc_info(ioc, "phy_control - send to sas_addr(0x%016llx), phy(%d), opcode(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1658
dtransportprintk(ioc, ioc_info(ioc, "phy_control - complete\n"));
drivers/scsi/mpt3sas/mpt3sas_transport.c
1665
ioc_info(ioc, "phy_control - reply data transfer size(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1676
ioc_info(ioc, "phy_control - function_result(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
1682
ioc_info(ioc, "phy_control - no reply\n"));
drivers/scsi/mpt3sas/mpt3sas_transport.c
1743
ioc_info(ioc, "phy(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
2066
ioc_info(ioc, "%s: host reset in progress!\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_transport.c
2126
ioc_info(ioc, "%s: sending smp request\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_transport.c
214
ioc_info(ioc, "%s: host reset in progress!\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_transport.c
2143
dtransportprintk(ioc, ioc_info(ioc, "%s - complete\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_transport.c
2147
ioc_info(ioc, "%s: no reply\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_transport.c
2155
ioc_info(ioc, "%s: reply data transfer size(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
374
ioc_info(ioc, "%s: host reset in progress!\n", __func__);
drivers/scsi/mpt3sas/mpt3sas_transport.c
433
ioc_info(ioc, "report_manufacture - send to sas_addr(0x%016llx)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
448
dtransportprintk(ioc, ioc_info(ioc, "report_manufacture - complete\n"));
drivers/scsi/mpt3sas/mpt3sas_transport.c
456
ioc_info(ioc, "report_manufacture - reply data transfer size(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_transport.c
478
ioc_info(ioc, "report_manufacture - no reply\n"));
drivers/scsi/mpt3sas/mpt3sas_transport.c
933
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_transport.c
958
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_transport.c
972
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_transport.c
992
ioc_info(ioc, "remove: sas_addr(0x%016llx), phy(%d)\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
102
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
118
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: enter\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
127
ioc_info(ioc,
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
166
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
206
ioc_info(ioc, "%s: enter - trigger_bitmask = 0x%08x\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
220
ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
244
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
282
ioc_info(ioc, "%s: enter - event = 0x%04x, log_entry_qualifier = 0x%04x\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
306
ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
315
ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
323
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
362
ioc_info(ioc, "%s: enter - sense_key = 0x%02x, asc = 0x%02x, ascq = 0x%02x\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
390
ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
399
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
436
ioc_info(ioc, "%s: enter - ioc_status = 0x%04x, loginfo = 0x%08x\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
463
ioc_info(ioc, "%s: setting diag_trigger_active flag\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
471
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: exit\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
75
dTriggerDiagPrintk(ioc, ioc_info(ioc, "%s: enter\n", __func__));
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
88
ioc_info(ioc, "%s: add to driver event log\n",
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c
97
ioc_info(ioc, "%s: clearing diag_trigger_active flag\n",
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
130
ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as drives are exposed\n");
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
135
ioc_info(ioc, "WarpDrive : Direct IO is disabled globally as number of drives > 1\n");
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
140
ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in computing number of drives\n");
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
147
ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n");
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
153
ioc_info(ioc, "WarpDrive : Direct IO is disabled Failure in retrieving RVPG0\n");
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
174
ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle retrieval failed for member number=%d\n",
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
182
ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) member handle (0x%04x) unsupported max lba 0x%016llx\n",
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
197
ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x): type=%d, s_sz=%uK, blk_size=%u\n",
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
208
ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid stripe sz %uK\n",
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
218
ioc_info(ioc, "WarpDrive : Direct IO is disabled for the drive with handle(0x%04x) invalid block sz %u\n",
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
225
ioc_info(ioc, "WarpDrive : Direct IO is Enabled for the drive with handle(0x%04x)\n",