/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

#ifndef _ENVD_H
#define _ENVD_H

#include <sys/types.h>
#include <libintl.h>

#ifdef  __cplusplus
extern "C" {
#endif

#define DISK_SCAN_INTERVAL      10
#define DISK_HIGH_WARN_TEMPERATURE      55
#define DISK_LOW_WARN_TEMPERATURE       5
#define DISK_HIGH_SHUTDOWN_TEMPERATURE  60
#define DISK_LOW_SHUTDOWN_TEMPERATURE   0
#define DISK_INVALID_TEMP       0xFFFF
#define LSI1030_VENDOR_ID       0x1000
#define LSI1030_DEVICE_ID       0x30
#define SENSORPOLL_INTERVAL     4
#define INTERRUPTPOLL_INTERVAL  2
#define WARNING_INTERVAL        30
#define DISK_WARNING_INTERVAL   30
#define DISK_WARNING_DURATION   20
#define SHUTDOWN_INTERVAL       60
#define DISK_SHUTDOWN_INTERVAL  30
#define ENV_CONF_FILE           "envmodel.conf"
#define TUNABLE_CONF_FILE       "piclenvd.conf"
#define PM_DEVICE               "/dev/pm"
#define SHUTDOWN_CMD            "/usr/sbin/shutdown -y -g 60 -i 5"
#define PICL_PLUGINS_NODE       "plugins"
#define PICL_ENVIRONMENTAL_NODE "environmental"

/*
 * ADC Sample of ADM in Khz, currently 11.2 KHz
 */
#define ADCSAMPLE               11250

/*
 * Enchilada Platform Details
 */
#define MAX_SENSORS     6
#define MAX_FANS        4
#define MAX_HWMS        2

/*
 * ADM1031 Hardware Monitor IDs
 * Used as index into arrays
 */
#define CPU_HWM_ID      0
#define SYS_HWM_ID      1

#define CPU_HWM_DEVFS   \
        "/devices/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,58:control"
#define SYS_HWM_DEVFS   \
        "/devices/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,5c:control"

#define DISK0_PHYSPATH  \
        "/pci@1d,700000/scsi@4/sd@0,0"

#define DISK1_PHYSPATH  \
        "/pci@1d,700000/scsi@4/sd@1,0"

#define ENV_DISK0_DEVFS \
        "/devices/pci@1d,700000/scsi@4/sd@0,0:a,raw"

#define ENV_DISK1_DEVFS \
        "/devices/pci@1d,700000/scsi@4/sd@1,0:a,raw"

#define DISK0_NODE_PATH \
        "name:/platform/pci@1d,700000/scsi@4/sd@0,0"

#define DISK1_NODE_PATH \
        "name:/platform/pci@1d,700000/scsi@4/sd@1,0"


#define SCSI_CONTROLLER_NODE_PATH       \
        "name:/platform/pci@1d,700000/scsi@4"

#define HWM_FAN1        0
#define HWM_FAN2        1

/*
 * Enchilada sensor IDs as used in FRUID segment
 */
#define CPU0_SENSOR_ID          0
#define CPU1_SENSOR_ID          1
#define INT_AMB0_SENSOR_ID      5
#define SYS_OUT_SENSOR_ID       3
#define INT_AMB1_SENSOR_ID      4
#define SYS_IN_SENSOR_ID        2
#define MAX_SENSOR_ID           5

/*
 * Enchilada fan IDs used in FRUID segment
 */
#define CPU0_FAN_ID             0
#define CPU1_FAN_ID             1
#define SYSTEM_OUT_FAN_ID       2
#define SYSTEM_INTAKE_FAN_ID    3
#define DIMM_FAN_ID             4

#define DISK0_ID                0
#define DISK1_ID                1


/* CPU Path Names */
#define CPU0_PATH               "_class:/jbus/cpu?ID=0"
#define CPU1_PATH               "_class:/jbus/cpu?ID=1"

/* DIMM Fan controller path Name */
#define DIMM_FAN_CONTROLLER_PATH        \
        "name:/platform/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,52"
/*
 * devfs-path for various fans and their min/max speeds
 */
#define ENV_CPU0_FAN_DEVFS      \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,58:fan_1"
#define ENV_CPU1_FAN_DEVFS      \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,58:fan_2"
#define ENV_SYSTEM_INTAKE_FAN_DEVFS     \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,5c:fan_1"
#define ENV_SYSTEM_OUT_FAN_DEVFS        \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,5c:fan_2"
#define ENV_DIMM_FAN_DEVFS      \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,52:fan_1"

#define FAN_RANGE_DEFAULT       4
#define CPU_FAN_SPEED_MIN       14
#define CPU_FAN_SPEED_MAX       100

#define SYSTEM_OUT_FAN_SPEED_MIN        14
#define SYSTEM_OUT_FAN_SPEED_MAX        100

#define SYSTEM_INTAKE_FAN_SPEED_MIN     14
#define SYSTEM_INTAKE_FAN_SPEED_MAX     100


/*
 * devfs-path for various temperature sensors and CPU platform path
 */
#define SENSOR_CPU0_DIE_DEVFS   \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,58:remote_1"
#define SENSOR_CPU1_DIE_DEVFS   \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,58:remote_2"
#define SENSOR_INT_AMB_0_DEVFS  \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,58:local"

#define SENSOR_SYS_IN_DEVFS     \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,5c:remote_1"
#define SENSOR_SYS_OUT_DEVFS    \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,5c:remote_2"
#define SENSOR_INT_AMB_1_DEVFS  \
        "/pci@1e,600000/isa@7/i2c@0,320/hardware-monitor@0,5c:local"

/*
 * Temperature type
 */
typedef int16_t tempr_t;


/*
 * Fan names
 */
#define ENV_SYSTEM_OUT_FAN      "outtake-fan"
#define ENV_CPU0_FAN            "cpu0-fan"
#define ENV_SYSTEM_INTAKE_FAN   "intake-fan"
#define ENV_CPU1_FAN            "cpu1-fan"
#define ENV_DIMM_FAN            "dimm-fan"

#define ENV_DISK0               "hard-disk0"
#define ENV_DISK1               "hard-disk1"
/*
 * Sensor names
 */
#define SENSOR_CPU0_DIE         "cpu0"
#define SENSOR_CPU1_DIE         "cpu1"
#define SENSOR_INT_AMB_0        "int-amb0"
#define SENSOR_SYS_IN           "sys-in"
#define SENSOR_SYS_OUT          "sys-out"
#define SENSOR_INT_AMB_1        "int-amb1"

/* Bit Map of ADM 1031 Status 1/2 Registers */
typedef enum adm1031 {
        FANFAULT = 0x2,
        REMOTEHIGH = 0x4,
        REMOTELOW = 0x8,
        REMOTETHERN = 0x10,
        LHIGH = 0x40,
        LLOW  = 0x80
} adm1031_t;

/* ADM Stat 1/2 Mask */
typedef enum adm1031Mask {
        STAT1MASK = 0xdc,
        STAT2MASK = 0x1c
} adm1031Mask_t;

/*
 * ES segment related structures
 */
typedef struct id_off {
        uint_t id;
        ushort_t offset;
} id_off_t;

typedef struct fan_ctl_pair {
        uchar_t tMin;
        uchar_t tRange;
} fan_ctl_pair_t;

typedef struct Correction_Pair {
        uchar_t measured;
        uchar_t corrected;
} Correction_Pair_t;

#define ES_SENSOR_POLICY_LEN    8
#define ES_CORRECTION_PAIRS     12

typedef struct sensor_ctrl_blk {
        uchar_t  high_power_off;
        uchar_t  high_shutdown;
        uchar_t  high_warning;
        uchar_t  low_warning;
        uchar_t  low_shutdown;
        uchar_t  low_power_off;
        uchar_t  sensorPolicy[ES_SENSOR_POLICY_LEN];
        ushort_t correctionEntries;
        Correction_Pair_t correctionPair[ES_CORRECTION_PAIRS];
} sensor_ctrl_blk_t;


#define ES_FAN_CTL_PAIRS        4

typedef struct fan_ctrl_blk {
        uchar_t  tSpinUp;
        uchar_t  minFanSpeed;
        ushort_t setPoint;
        ushort_t loopGain;
        ushort_t loopBias;
        ushort_t hysteresis;
        ushort_t fanViabTestInt;
        ushort_t fanViabTestThresh;
        ushort_t grossFanThresh;
        uchar_t no_ctl_pairs;
        fan_ctl_pair_t fan_ctl_pairs[ES_FAN_CTL_PAIRS];
} fan_ctrl_blk_t;

#define TEMP_IN_WARNING_RANGE(val, sensorp) \
        ((val) > (sensorp)->es_ptr->high_warning || \
        (val) < (char)((sensorp)->es_ptr->low_warning))

#define TEMP_IN_SHUTDOWN_RANGE(val, sensorp) \
        ((val) > (sensorp)->es_ptr->high_shutdown || \
        (val) < (char)((sensorp)->es_ptr->low_shutdown))

#define DISK_TEMP_IN_WARNING_RANGE(val, diskp) \
        ((val) > (diskp)->high_warning || \
        (val) < (char)((diskp)->low_warning))

#define DISK_TEMP_IN_SHUTDOWN_RANGE(val, diskp) \
        ((val) > (diskp)->high_shutdown || \
        (val) < (char)((diskp)->low_shutdown))

/*
 * Macros to fetch 16 and 32 bit data from unaligned address
 */
#define GET_UNALIGN16(addr)     \
        (((*(uint8_t *)addr) << 8) | *((uint8_t *)addr + 1))

#define GET_UNALIGN32(addr)     \
        (((*(uint8_t *)addr) << 24) | (*((uint8_t *)addr + 1) << 16) | \
        ((*((uint8_t *)addr + 2)) << 8) | (*((uint8_t *)addr + 3)))


/*
 * SEEPROM section header layout and location
 */
typedef struct {
        uint8_t         header_tag;             /* section header tag */
        uint8_t         header_version[2];      /* header version (msb) */
        uint8_t         header_length;          /* header length */
        uint8_t         header_crc8;            /* crc8 */
        uint8_t         segment_count;          /* total number of segments */
} section_layout_t;

#define SECTION_HDR_OFFSET      0x1800
#define SECTION_HDR_TAG         0x08
#define SECTION_HDR_VER         0x0001
#define SECTION_HDR_LENGTH      0x06

/*
 * SEEPROM segment header layout
 */
typedef struct {
        uint16_t        name;           /* segment name */
        uint16_t        descriptor[2];  /* descriptor (msb) */
        uint16_t        offset;         /* segment data offset */
        uint16_t        length;         /* segment length */
} segment_layout_t;

#define ENVSEG_NAME             0x4553  /* environmental segment name */
#define ENVSEG_VERSION          2       /* environmental segment version */

#define SENSOR_WARN             1
#define SENSOR_OK               0

/*
 * SEEPROM environmental segment header layout
 */
typedef struct {
        uint16_t        sensor_id[2];   /* unique sensor ID (on this FRU) */
        uint16_t        offset;         /* sensor data record offset */
} envseg_sensor_t;

typedef struct {
        uint8_t         version;        /* envseg version */
        uint8_t         sensor_count;   /* total number of sensor records */
        envseg_sensor_t sensors[1];     /* sensor table (variable length) */
} envseg_layout_t;

/*
 * FRU envseg list
 */
typedef struct fruenvseg {
        struct fruenvseg        *next;          /* next entry */
        char                    *fru;           /* FRU SEEPROM path */
        void                    *envsegbufp;    /* envseg data buffer */
        int                     envseglen;      /* envseg length */
} fruenvseg_t;

#define I2C_DEVFS       "/devices/pci@1e,600000/isa@7/i2c@0,320"
#define MBFRU_DEV       "/motherboard-fru-prom@0,a2:motherboard-fru-prom"
#define FRU_SEEPROM_NAME        "motherboard-fru-prom"

/*
 * Table data structures
 */

typedef struct {
        int32_t x;
        int32_t y;
} point_t;

typedef struct {
        int     nentries;
        point_t *xymap;
} table_t;

/*
 * Temperature sensor related data structure
 */
typedef struct env_sensor {
        char            *name;                  /* sensor name */
        char            *devfs_path;            /* sensor device devfs path */
        sensor_ctrl_blk_t       *es_ptr;
        int             id;
        int             hwm_id;
        void            *fanp;
        int             fd;                     /* device file descriptor */
        int             error;                  /* error flag */
        boolean_t       present;                /* sensor present */
        tempr_t         cur_temp;               /* current temperature */
        time_t          warning_tstamp;         /* last warning time (secs) */
        time_t          shutdown_tstamp;        /* shutdown temp time (secs) */
        boolean_t       shutdown_initiated;     /* shutdown initated */
        table_t         *crtbl;                 /* Correction Table */
        tempr_t         tmin;
} env_sensor_t;

extern  env_sensor_t *sensor_lookup(char *sensor_name);
extern  int get_temperature(env_sensor_t *, tempr_t *);

typedef struct env_disk {
        char            *name;                  /* disk name */
        char            *devfs_path;    /* disk device devfs path */
        char            *physpath;      /* used to be probe for IDLW TIME */
        char            *nodepath;      /* used to detect presence of disk */
        uchar_t         id;
        int             fd;             /* device file descriptor */
        boolean_t       present;        /* disk present */
        boolean_t       tpage_supported;        /* Temperature page */
        int             current_temp;
        int             ref_temp;
        int             reliability_temp;
        uchar_t         high_shutdown;
        uchar_t         high_warning;
        uchar_t         low_warning;
        uchar_t         low_shutdown;
        time_t          warning_start;          /* warning start time (secs) */
        time_t          warning_tstamp;         /* last warning time (secs) */
        time_t          shutdown_tstamp;        /* shutdown temp time (secs) */
        boolean_t       shutdown_initiated;     /* shutdown initated */
} env_disk_t;

extern  env_disk_t *disk_lookup(char *disk_name);
extern  int disk_temperature(env_disk_t *, tempr_t *);

/*
 * Fan information data structure
 */
typedef int fanspeed_t;

typedef struct env_fan {
        char            *name;                  /* fan name */
        char            *devfs_path;    /* fan device devfs path */
        fan_ctrl_blk_t  *es_ptr;
        uchar_t         id;
        fanspeed_t      speed_min;              /* minimum speed */
        fanspeed_t      speed_max;              /* maximum speed */
        int             forced_speed;           /* forced (fixed) speed */
        int             fd;                     /* device file descriptor */
        boolean_t       present;                /* fan present */
        int             speedrange;             /* speed range N */
        int             fanstat;                /* Fan status */
        uint8_t         cspeed;                 /* Current speed (tach) */
        uint8_t         lspeed;                 /* Last speed (tach) */
        int             conccnt;                /* Concurrent tach count */
} env_fan_t;

/*
 * Tuneables
 */
typedef struct env_tuneable {
        char            *name;
        char            type;
        void            *value;
        int             (*rfunc)(ptree_rarg_t *, void *);
        int             (*wfunc)(ptree_warg_t *, const void *);
        int             nbytes;
        picl_prophdl_t proph;
} env_tuneable_t;

extern  env_fan_t *fan_lookup(char *fan_name);
extern  int get_fan_speed(env_fan_t *, fanspeed_t *);
extern  int set_fan_speed(env_fan_t *, fanspeed_t);

extern int env_debug;
extern void envd_log(int pri, const char *fmt, ...);

/*
 * Various messages
 */
#define ENVD_PLUGIN_INIT_FAILED         \
        gettext("SUNW_piclenvd: initialization failed!\n")

#define ENVD_PICL_SETUP_FAILED          \
        gettext("SUNW_piclenvd: PICL setup failed!\n")

#define PM_THREAD_CREATE_FAILED         \
        gettext("SUNW_piclenvd: pmthr thread creation failed!\n")

#define PM_THREAD_EXITING               \
        gettext("SUNW_piclenvd: pmthr exiting! errno:%d %s\n")

#define DISK_TEMP_THREAD_EXITING                \
        gettext("SUNW_piclenvd: Disk temp thread exiting."      \
        " Disk temperature will not be monitored. errno:%d %s\n")

#define ENVTHR_THREAD_CREATE_FAILED     \
        gettext("SUNW_piclenvd: envthr thread creation failed!\n")

#define ENV_SHUTDOWN_MSG                \
        gettext("SUNW_piclenvd: '%s' sensor temperature %d outside safe " \
        "limits (%d...%d). Shutting down the system.\n")

#define ENV_DIMM_FAN_FAILURE_SHUTDOWN_MSG               \
        gettext("SUNW_piclenvd: %s has Failed.\n"       \
        "(rpm = %s status = %s command = %s debug = %s).\n" \
        "Shutting down the system to protect the memory modules.\n")

#define ENV_WARNING_MSG                 \
        gettext("SUNW_piclenvd: '%s' sensor temperature %d outside safe " \
        "operating limits (%d...%d).\n")

#define ENV_FAN_OPEN_FAIL               \
        gettext("SUNW_piclenvd: can't open '%s' fan path:%s errno:%d %s\n")

#define ENV_SENSOR_OPEN_FAIL            \
        gettext("SUNW_piclenvd: can't open '%s' sensor path:%s errno:%d %s\n")

#define ENV_SENSOR_ACCESS_FAIL          \
        gettext("SUNW_piclenvd: can't access '%s' sensor errno:%d %s\n")

#define ENV_SENSOR_ACCESS_OK            \
        gettext("SUNW_piclenvd: '%s' sensor is accessible now.\n")

#define ENV_FRU_OPEN_FAIL               \
        gettext("SUNW_piclenvd: can't open FRU SEEPROM path:%s errno:%d %s\n")

#define ENV_FRU_BAD_ENVSEG              \
        gettext("SUNW_piclenvd: version mismatch or environmental segment " \
        "header too short in FRU SEEPROM %s\n")

#define ENV_FRU_BAD_SENSOR_ENTRY        \
        gettext("SUNW_piclenvd: discarding bad sensor entry (sensor_id " \
        "%x sensor '%s') in FRU SEEPROM %s\n")

#define ENV_FRU_SENSOR_MAP_NOMEM        \
        gettext("SUNW_piclenvd: out of memory, discarding sensor map for " \
        "sensor_id %x (sensor '%s') in FRU SEEPROM %s\n")

#define ENV_ADM_OPEN_FAIL               \
        gettext("SUNW_piclenvd: can't open hwm path:%s errno:%d %s\n")

#define ENV_ADM_MANUAL_MODE \
        gettext("SUNW_piclenvd: Cannot change the ADM Chip to Manual mode")

#define ENV_ADM_AUTO_MODE \
        gettext("SUNW_piclenvd: Cannot change the ADM Chip to Auto mode")

#define ENV_FAN_FAULT \
        gettext("SUNW_piclenvd: ADM %s, Fan %s Fault")

#ifdef  __cplusplus
}
#endif

#endif  /* _ENVD_H */