/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SMBSRV_NMPIPES_H #define _SMBSRV_NMPIPES_H /* * This file defines pre-defined and system common named pipes. * * Named pipes are a simple IPC mechanism supported by Windows 9x, NT * and 2000. The Windows named pipe implementation supports reliable * one-way and two-way transport independent network messaging. The * names follow the universal naming convention (UNC) defined for the * Windows redirector: \\[server]\[share]\[path]name. There is a good * overview of named pipes in Network Programming for Microsoft Windows * Chapter 4. The redirector is described in Chapter 2. UNC names are * case-insensitive. * * Network Programming for Microsoft Windows * Anthony Jones and Jim Ohlund * Microsoft Press, ISBN 0-7356-0560-2 * * Microsoft RPC, which is derived from DCE RPC, uses SMB named pipes * as its transport mechanism. In addition to the pipe used to open * each connection, a named pipe also appears in the bind response as * a secondary address port. Sometimes the secondary address port is * the same and sometimes it is different. The following associations * have been observed. * * LSARPC lsass * NETLOGON lsass * SAMR lsass * SPOOLSS spoolss * SRVSVC ntsvcs * SVCCTL ntsvcs * WINREG winreg * WKSSVC ntsvcs * EVENTLOG ntsvcs * LLSRPC llsrpc * * Further information on RPC named pipes is available in the following * references. * * RPC for NT * Guy R. Eddon * R&D PUblications, ISBN 0-87930-450-2 * * Network Programming in Windows NT * Alok K. Sinha * Addison-Wesley, ISBN 0-201-59056-5 * * DCE/RPC over SMB Samba and Windows NT Domain Internals * Luke Kenneth Casson Leighton * Macmillan Technical Publishing, ISBN 1-57870-150-3 */ #ifdef __cplusplus extern "C" { #endif /* * Well-known or pre-defined Windows named pipes. Typically used * with SmbNtCreateAndX and/or SmbTransactNmPipe. When passed to * SmbNtCreateAndX the \PIPE prefix is often missing. These names * are presented as observed on the wire but should be treated in * a case-insensitive manner. */ #define PIPE_LANMAN "\\PIPE\\LANMAN" #define PIPE_NETLOGON "\\PIPE\\NETLOGON" #define PIPE_LSARPC "\\PIPE\\lsarpc" #define PIPE_SAMR "\\PIPE\\samr" #define PIPE_SPOOLSS "\\PIPE\\spoolss" #define PIPE_SRVSVC "\\PIPE\\srvsvc" #define PIPE_SVCCTL "\\PIPE\\svcctl" #define PIPE_WINREG "\\PIPE\\winreg" #define PIPE_WKSSVC "\\PIPE\\wkssvc" #define PIPE_EVENTLOG "\\PIPE\\EVENTLOG" #define PIPE_LSASS "\\PIPE\\lsass" #define PIPE_NTSVCS "\\PIPE\\ntsvcs" #define PIPE_ATSVC "\\PIPE\\atsvc" #define PIPE_BROWSESS "\\PIPE\\browsess" #define PIPE_WINSSVC "\\PIPE\\winssvc" #define PIPE_WINSMGR "\\PIPE\\winsmgr" #define PIPE_LLSRPC "\\PIPE\\llsrpc" #define PIPE_REPL "\\PIPE\\repl" #define PIPE_NETDFS "\\PIPE\\netdfs" /* * Named pipe function codes (NTDDK). */ #define TRANS_SET_NMPIPE_STATE 0x01 #define TRANS_RAW_READ_NMPIPE 0x11 #define TRANS_QUERY_NMPIPE_STATE 0x21 #define TRANS_QUERY_NMPIPE_INFO 0x22 #define TRANS_PEEK_NMPIPE 0x23 #define TRANS_TRANSACT_NMPIPE 0x26 #define TRANS_RAW_WRITE_NMPIPE 0x31 #define TRANS_READ_NMPIPE 0x36 #define TRANS_WRITE_NMPIPE 0x37 #define TRANS_WAIT_NMPIPE 0x53 #define TRANS_CALL_NMPIPE 0x54 /* * SMB pipe handle state bits used by Query/SetNamedPipeHandleState. * These numbers are the bit locations of the fields in the handle state. */ #define PIPE_COMPLETION_MODE_BITS 15 #define PIPE_PIPE_END_BITS 14 #define PIPE_PIPE_TYPE_BITS 10 #define PIPE_READ_MODE_BITS 8 #define PIPE_MAXIMUM_INSTANCES_BITS 0 /* * DosPeekNmPipe pipe states. */ #define PIPE_STATE_DISCONNECTED 0x0001 #define PIPE_STATE_LISTENING 0x0002 #define PIPE_STATE_CONNECTED 0x0003 #define PIPE_STATE_CLOSING 0x0004 /* * DosCreateNPipe and DosQueryNPHState state. */ #define SMB_PIPE_READMODE_BYTE 0x0000 #define SMB_PIPE_READMODE_MESSAGE 0x0100 #define SMB_PIPE_TYPE_BYTE 0x0000 #define SMB_PIPE_TYPE_MESSAGE 0x0400 #define SMB_PIPE_END_CLIENT 0x0000 #define SMB_PIPE_END_SERVER 0x4000 #define SMB_PIPE_WAIT 0x0000 #define SMB_PIPE_NOWAIT 0x8000 #define SMB_PIPE_UNLIMITED_INSTANCES 0x00FF #ifdef __cplusplus } #endif #endif /* _SMBSRV_NMPIPES_H */
