root/usr/src/uts/common/sys/squeue_impl.h
/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 * Copyright 2017 Joyent, Inc.
 */

#ifndef _SYS_SQUEUE_IMPL_H
#define _SYS_SQUEUE_IMPL_H

#ifdef  __cplusplus
extern "C" {
#endif

#include <sys/disp.h>
#include <sys/types.h>
#include <sys/squeue.h>
#include <inet/ip.h>

#define SQ_NAMELEN 31

/*
 * SQUEUE_DEBUG: If defined as 1, special code is compiled in which records
 *      additional information aiding debugging is recorded in squeue.
 *
 * SQUEUE_PROFILE: If defined as 1, special code is compiled in which collects
 *      various squeue statistics and exports them as kstats.
 *
 * Ideally we would like both SQUEUE_DEBUG and SQUEUE_PROFILE to be always set,
 * but it affects performance, so they are enabled on DEBUG kernels and disabled
 * on non-DEBUG by default.
 */
#ifdef DEBUG
#define SQUEUE_DEBUG 1
#define SQUEUE_PROFILE 1
#else
#define SQUEUE_DEBUG 0
#define SQUEUE_PROFILE 0
#endif

#define SQUEUE_DEFAULT_PRIORITY MAXCLSYSPRI

typedef struct sqstat_s {
        uint_t          sq_max_qlen;
        uint_t          sq_npackets_worker;
        uint_t          sq_npackets_intr;
        uint_t          sq_npackets_other;
        uint_t          sq_nqueued_intr;
        uint_t          sq_nqueued_other;
        uint_t          sq_ndrains_worker;
        uint_t          sq_ndrains_intr;
        uint_t          sq_ndrains_other;
        hrtime_t        sq_time_worker;
        hrtime_t        sq_time_intr;
        hrtime_t        sq_time_other;
} sqstat_t;

typedef struct squeue_set_s {
        squeue_t        *sqs_head;
        squeue_t        *sqs_default;
        processorid_t   sqs_cpuid;
} squeue_set_t;

typedef void (*sqproc_t)(void *, mblk_t *, void *, struct ip_recv_attr_s *);
typedef void (*sq_enter_proc_t)(squeue_t *, mblk_t *, mblk_t *, uint32_t,
            struct ip_recv_attr_s *, int, uint8_t);
typedef void (*sq_drain_proc_t)(squeue_t *, uint_t, hrtime_t);

extern int ip_squeue_flag;

struct squeue_s {
        sq_enter_proc_t sq_enter;       /* sq_process function */
        sq_drain_proc_t sq_drain;       /* sq_drain function */
        kmutex_t        sq_lock;        /* lock before using any member */
        uint32_t        sq_state;       /* state flags and message count */
        int             sq_count;       /* # of mblocks in squeue */
        mblk_t          *sq_first;      /* first mblk chain or NULL */
        mblk_t          *sq_last;       /* last mblk chain or NULL */
        kthread_t       *sq_run;        /* Current thread processing sq */
        ill_rx_ring_t   *sq_rx_ring;    /* The Rx ring tied to this sq */
        ill_t           *sq_ill;        /* The ill this squeue is tied to */

        hrtime_t        sq_awoken;      /* time of worker wake req */
        kcondvar_t      sq_worker_cv;   /* cond var. worker thread blocks on */
        kcondvar_t      sq_poll_cv;     /* cond variable poll_thr waits on */
        kcondvar_t      sq_synch_cv;    /* cond var. synch thread waits on */
        kcondvar_t      sq_ctrlop_done_cv; /* cond variable for ctrl ops */

        processorid_t   sq_bind;        /* processor to bind to */
        kthread_t       *sq_worker;     /* kernel thread id */
        kthread_t       *sq_poll_thr;   /* polling thread */
        uintptr_t       sq_private[SQPRIVATE_MAX];

        squeue_t        *sq_next;       /* managed by squeue creator */
        squeue_set_t    *sq_set;        /* managed by squeue creator */

        pri_t           sq_priority;    /* squeue thread priority */

        /* Keep the debug-only fields at the end of the structure */
#ifdef DEBUG
        int             sq_isintr;      /* serviced by interrupt */
        mblk_t          *sq_curmp;
        void            (*sq_curproc)();
        conn_t          *sq_connp;
        uchar_t         sq_tag;
#endif
};

/*
 * State flags.
 * Note: The MDB IP module depends on the values of these flags.
 */
#define SQS_PROC        0x00000001      /* being processed */
#define SQS_WORKER      0x00000002      /* worker thread */
#define SQS_ENTER       0x00000004      /* enter thread */
#define SQS_FAST        0x00000008      /* enter-fast thread */

#define SQS_USER        0x00000010      /* A non interrupt user */
#define SQS_BOUND       0x00000020      /* Worker thread is bound */
#define SQS_REENTER     0x00000040      /* Re entered thread */

#define SQS_POLL_CAPAB  0x00000100      /* Squeue can control interrupts */
#define SQS_ILL_BOUND   0x00000200      /* Squeue bound to an ill */
#define SQS_GET_PKTS    0x00000400      /* Moving pkts from NIC in progress */
#define SQS_DEFAULT     0x00000800      /* The default squeue for the CPU */

#define SQS_POLLING     0x00001000      /* Squeue in polling mode */
#define SQS_INTR_BLANK  0x00002000      /* Interrupt blanking capability */
#define SQS_PROC_HELD   0x00004000      /* SQS_PROC is held by the caller */
#define SQS_FORCE_TIMER 0x00008000      /* Schedule worker due to B/W control */

#define SQS_POLL_CLEANUP        0x00010000
#define SQS_POLL_CLEANUP_DONE   0x00020000
#define SQS_POLL_QUIESCE        0x00040000
#define SQS_POLL_QUIESCE_DONE   0x00080000

#define SQS_POLL_RESTART        0x00100000
#define SQS_POLL_THR_QUIESCED   0x00200000
#define SQS_POLL_THR_RESTART    0x00400000
#define SQS_POLL_PROC           0x00800000 /* Poll thread processing the sq */

#define SQS_POLL_RESTART_DONE   0x01000000
#define SQS_POLL_THR_QUIESCE    0x02000000
#define SQS_PAUSE               0x04000000 /* The squeue has been paused */

#define SQS_WORKER_THR_CONTROL          \
        (SQS_POLL_QUIESCE | SQS_POLL_RESTART | SQS_POLL_CLEANUP)

#define SQS_POLL_THR_CONTROL            \
        (SQS_POLL_THR_QUIESCE | SQS_POLL_THR_RESTART)

#ifdef  __cplusplus
}
#endif

#endif  /* _SYS_SQUEUE_IMPL_H */