/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2008 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SYS_ACCTCTL_H #define _SYS_ACCTCTL_H #include <sys/types.h> #include <sys/bitmap.h> #include <sys/sysmacros.h> #ifdef __cplusplus extern "C" { #endif /* * Definitions for acctctl() system call */ /* * modes */ #define AC_PROC (0x1 << 24) /* change process accounting settings */ #define AC_TASK (0x2 << 24) /* change task accounting settings */ #define AC_FLOW (0x4 << 24) /* change flow accounting settings */ #define AC_NET (0x8 << 24) /* change network accounting settings */ #define AC_MODE(x) ((x) & 0xff000000) /* * options */ #define AC_FILE_SET (0x01) /* set accounting file name */ #define AC_FILE_GET (0x02) /* get accounting file name */ #define AC_RES_SET (0x04) /* set (enable/disable) resources */ #define AC_RES_GET (0x08) /* get a list of enabled resources */ #define AC_STATE_SET (0x10) /* set accounting mode state (on/off) */ #define AC_STATE_GET (0x20) /* get accounting mode state */ #define AC_OPTION(x) ((x) & 0x00ffffff) /* * Process accounting resource IDs */ #define AC_NONE 0 /* special end-of-list identifier */ #define AC_PROC_PID 1 /* process ID */ #define AC_PROC_UID 2 /* user ID */ #define AC_PROC_GID 3 /* group ID */ #define AC_PROC_PROJID 4 /* project ID */ #define AC_PROC_TASKID 5 /* task ID */ #define AC_PROC_CPU 6 /* user/system cpu time */ #define AC_PROC_TIME 7 /* start/finish time */ #define AC_PROC_COMMAND 8 /* command name */ #define AC_PROC_TTY 9 /* control tty */ #define AC_PROC_HOSTNAME 10 /* hostname */ #define AC_PROC_MICROSTATE 11 /* microstate accounting */ #define AC_PROC_FLAG 12 /* accounting flags */ #define AC_PROC_ANCPID 13 /* ancestor process's ID */ #define AC_PROC_WAIT_STATUS 14 /* process wait status */ #define AC_PROC_ZONENAME 15 /* zone name */ #define AC_PROC_MEM 16 /* memory usage */ #define AC_PROC_MAX_RES 16 /* must be equal to the number above */ /* * Task accounting resource IDs */ #define AC_TASK_TASKID 1 /* task ID */ #define AC_TASK_PROJID 2 /* project ID */ #define AC_TASK_CPU 3 /* user/system cpu time */ #define AC_TASK_TIME 4 /* start/finish time */ #define AC_TASK_HOSTNAME 5 /* hostname */ #define AC_TASK_MICROSTATE 6 /* microstate accounting */ #define AC_TASK_ANCTASKID 7 /* ancestor task's taskid */ #define AC_TASK_ZONENAME 8 /* zone name */ #define AC_TASK_MAX_RES 8 /* must be equal to the number above */ /* * Flow accounting resource IDs */ #define AC_FLOW_SADDR 1 /* source address */ #define AC_FLOW_DADDR 2 /* destination address */ #define AC_FLOW_SPORT 3 /* source port */ #define AC_FLOW_DPORT 4 /* destination port */ #define AC_FLOW_PROTOCOL 5 /* protocol */ #define AC_FLOW_DSFIELD 6 /* dsfield */ #define AC_FLOW_CTIME 7 /* creation time for this flow */ #define AC_FLOW_LSEEN 8 /* pkt last seen for this flow */ #define AC_FLOW_NBYTES 9 /* no. of bytes in this flow */ #define AC_FLOW_NPKTS 10 /* no. of packets for this flow */ #define AC_FLOW_PROJID 11 /* project id */ #define AC_FLOW_UID 12 /* user id */ #define AC_FLOW_ANAME 13 /* action instance name */ #define AC_FLOW_MAX_RES 13 /* must be equal to the number above */ /* * Network accounting resource IDs */ #define AC_NET_NAME 1 /* flow name */ #define AC_NET_EHOST 2 /* ethernet source address */ #define AC_NET_EDEST 3 /* ethernet destination address */ #define AC_NET_VLAN_TPID 4 /* VLAN protocol ID */ #define AC_NET_VLAN_TCI 5 /* VLAN tag control info. */ #define AC_NET_SAP 6 /* SAP */ #define AC_NET_PRIORITY 7 /* Priority */ #define AC_NET_BWLIMIT 8 /* Bandwidth limit */ #define AC_NET_DEVNAME 9 /* Device name */ #define AC_NET_SADDR 10 /* Source IP address */ #define AC_NET_DADDR 11 /* Dest IP address */ #define AC_NET_SPORT 12 /* Source Port */ #define AC_NET_DPORT 13 /* Dest Port */ #define AC_NET_PROTOCOL 14 /* Protocol */ #define AC_NET_DSFIELD 15 /* DiffServ field */ #define AC_NET_CURTIME 16 /* Current Time */ #define AC_NET_IBYTES 17 /* Inbound Bytes */ #define AC_NET_OBYTES 18 /* Outbound Bytes */ #define AC_NET_IPKTS 19 /* Inbound Packets */ #define AC_NET_OPKTS 20 /* Outbound Packets */ #define AC_NET_IERRPKTS 21 /* Inbound Error Packets */ #define AC_NET_OERRPKTS 22 /* Outbound Error Packets */ #define AC_NET_MAX_RES 22 /* must be equal to the number above */ #define AC_MAX_RES \ MAX(MAX(MAX(AC_PROC_MAX_RES, AC_TASK_MAX_RES), AC_FLOW_MAX_RES), \ AC_NET_MAX_RES) #define AC_MASK_SZ BT_BITOUL(AC_MAX_RES + 1) /* * resource states */ #define AC_ON 1 /* enabled resource */ #define AC_OFF 0 /* disabled resource */ typedef struct ac_res { int ar_id; /* resource ID */ int ar_state; /* resource state; see above */ } ac_res_t; #ifdef _KERNEL #include <sys/vnode.h> #include <sys/zone.h> #include <sys/list.h> typedef struct ac_info { kmutex_t ac_lock; /* protects the structure */ vnode_t *ac_vnode; /* exacct file vnode pointer */ char *ac_file; /* exacct file name */ int ac_state; /* accounting state */ ulong_t ac_mask[AC_MASK_SZ]; /* bitmask of resources */ } ac_info_t; /* * Key used for retrieving per-zone exacct settings. This remains * uninitialized (ZONE_KEY_UNINITIALIZED) until the acctctl module is loaded. */ extern zone_key_t exacct_zone_key; /* * Per-zone exacct settings. Each zone may have its own settings for * process, task, flow, and network accounting. * * Per-zone flow accounting has not yet been implemented, so this * provides zones with the view that flow accounting in the zone hasn't * been initialized (which is true). The various system calls will fail * to set flow accounting parameters from within a zone. * * The global list of accounting settings is used when we check to see * if the accounting file is already in use by any zone. */ struct exacct_globals { ac_info_t ac_task; ac_info_t ac_proc; ac_info_t ac_flow; ac_info_t ac_net; list_node_t ac_link; }; #else extern int acctctl(int cmd, void *buf, size_t bufsz); #endif /* ifdef _KERNEL */ #ifdef __cplusplus } #endif #endif /* _SYS_ACCTCTL_H */
