/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License, Version 1.0 only
 * (the "License").  You may not use this file except in compliance
 * with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 1995-1998 by Sun Microsystems, Inc.
 * All rights reserved.
 */

#ifndef _SYS_FC4_FCAL_H
#define _SYS_FC4_FCAL_H

#ifdef  __cplusplus
extern "C" {
#endif

/*
 * Fibre Channel Physical and Signaling Interface (FC-PH) definitions.
 *
 * NOTE: modifications of this file affect drivers, mpsas models, PLUTO
 *      firmware, SOC assembly code. Please be communicative.
 */

#define FC_PH_VERSION   0x06    /* 0x06 means 4.0 ! */
#define MAX_FRAME_SIZE  2112    /* maximum size of frame payload */

/*
 * This is the standard frame header for FC-PH frames.
 */

typedef struct FC2_FRAME_HDR {
        uint_t  r_ctl:8,        d_id:24;
        uint_t  reserved1:8,    s_id:24;
        uint_t  type:8,         f_ctl:24;
        uint_t  seq_id:8,       df_ctl:8,       seq_cnt:16;
        uint16_t        ox_id, rx_id;
        uint32_t        ro;
}aFC2_FRAME_HDR, *FC2_FRAME_HDRptr, fc_frame_header_t;

#define WE_ARE_ORIGINATOR(fh)           (fh->f_ctl & F_CTL_XCHG_CONTEXT)
#define UNSOLICITED_FRAME(fh)           (fh->rx_id == 0xffff)
#define FIRST_SEQUENCE(fh)              (fh->f_ctl & F_CTL_FIRST_SEQ)
#define LAST_FRAME_OF_SEQUENCE(fh)      (fh->f_ctl & F_CTL_END_SEQ)
#define LAST_SEQUENCE_OF_EXCHANGE(fh)   (fh->f_ctl & F_CTL_LAST_SEQ)
#define TRANSFER_INITIATIVE(fh)         (fh->f_ctl & F_CTL_SEQ_INITIATIVE)


/* legal values for r_ctl */
#define R_CTL_ROUTING           0xf0 /* mask for routing bits */
#define R_CTL_INFO              0x0f /* mask for information bits */

#define R_CTL_DEVICE_DATA       0x00 /* all I/O related frames */
#define R_CTL_EXTENDED_SVC      0x20 /* extended link services (PLOGI) */
#define R_CTL_FC4_SVC           0x30 /* FC-4 link services (FCP_LOGI) */
#define R_CTL_VIDEO_BUFF        0x40 /* not yet defined */
#define R_CTL_BASIC_SVC         0x80 /* basic link services (NOP) */
#define R_CTL_LINK_CTL          0xc0 /* ACKs, etc. */

/* legal values for r_ctl: Device Data */
#define R_CTL_UNCATEGORIZED     0x00
#define R_CTL_SOLICITED_DATA    0x01
#define R_CTL_UNSOL_CONTROL     0x02
#define R_CTL_SOLICITED_CONTROL 0x03
#define R_CTL_UNSOL_DATA        0x04
#define R_CTL_XFER_RDY          0x05
#define R_CTL_COMMAND           0x06
#define R_CTL_STATUS            0x07

/* legal values for r_ctl: Basic Link Services, type 0 */
#define R_CTL_LS_NOP            0x80
#define R_CTL_LS_ABTS           0x81
#define R_CTL_LS_RMC            0x82
#define R_CTL_LS_BA_ACC         0x84
#define R_CTL_LS_BA_RJT         0x85

/* legal values for r_ctl: Extended Link Services, type 1 */
#define R_CTL_ELS_REQ           0x22
#define R_CTL_ELS_RSP           0x23

/* legal values for r_ctl: Link Control */
#define R_CTL_ACK_1             0xc0
#define R_CTL_ACK_N             0xc1
#define R_CTL_P_RJT             0xc2
#define R_CTL_F_RJT             0xc3
#define R_CTL_P_BSY             0xc4
#define R_CTL_F_BSY_DF          0xc5
#define R_CTL_F_BSY_LC          0xc6
#define R_CTL_LCR               0xc7

/* type field definitions for Link Data frames: */
#define TYPE_BASIC_LS           0x00
#define TYPE_EXTENDED_LS        0x01

/* type field definitions for Device Data frames (from FC-PH 4.1): */
#define TYPE_IS8802             0x04
#define TYPE_IS8802_SNAP        0x05
#define TYPE_SCSI_FCP           0x08 /* we use this one */
#define TYPE_SCSI_GPP           0x09
#define TYPE_HIPP_FP            0x0a
#define TYPE_IPI3_MASTER        0x11
#define TYPE_IPI3_SLAVE         0x12
#define TYPE_IPI3_PEER          0x13

#define F_CTL_XCHG_CONTEXT      0x800000 /* 0 if SID is XCHG originator */
#define F_CTL_SEQ_CONTEXT       0x400000 /* 0 if SID is SEQ initiator */
#define F_CTL_FIRST_SEQ         0x200000 /* 1 if first sequence of XCHG */
#define F_CTL_LAST_SEQ          0x100000 /* 1 if last SEQ of XCHG */
#define F_CTL_END_SEQ           0x080000 /* 1 if last frame of a SEQ */
#define F_CTL_END_CONNECT       0x040000 /* always 0 */
#define F_CTL_CHAINED_SEQ       0x020000 /* always 0 */
#define F_CTL_SEQ_INITIATIVE    0x010000 /* when 1 xfrs SEQ initiative */
#define F_CTL_XID_REASSIGNED    0x008000 /* always 0 */
#define F_CTL_INVALIDATE_XID    0x004000 /* always 0 */
#define F_CTL_CONTINUE_SEQ      0x0000C0 /* always 0 */
#define F_CTL_ABORT_SEQ         0x000030 /* always 0 */
#define F_CTL_RO_PRESENT        0x000008 /* 1 if param field == RO */
#define F_CTL_XCHG_REASSEMBLE   0x000004 /* always 0 */
#define F_CTL_FILL_BYTES        0x000003 /* # of fill bytes in this frame */
#define F_CTL_RESERVED          0x003F00
#define F_CTL_ALWAYS_ZERO       (F_CTL_RESERVED | F_CTL_XCHG_REASSEMBLE | \
        F_CTL_ABORT_SEQ | F_CTL_CONTINUE_SEQ| F_CTL_INVALIDATE_XID | \
        F_CTL_XID_REASSIGNED | F_CTL_CHAINED_SEQ | F_CTL_END_CONNECT)

/* Well known addresses ... */
#define FS_GENERAL_MULTICAST    0xfffff7
#define FS_WELL_KNOWN_MULTICAST 0xfffff8
#define FS_HUNT_GROUP           0xfffff9
#define FS_MANAGEMENT_SERVER    0xfffffa
#define FS_TIME_SERVER          0xfffffb
#define FS_NAME_SERVER          0xfffffc
#define FS_FABRIC_CONTROLLER    0xfffffd
#define FS_FABRIC_F_PORT        0xfffffe
#define FS_BROADCAST            0xffffff

/* Fabric Busy Reason Codes */
#define FABRIC_BUSY             0x01
#define NPORT_BUSY              0x03

/* NPort Busy Reason Codes */
#define PHYSICAL_BUSY           0x01
#define RESOURSE_BUSY           0x03

/* Reject Reason Codes */

typedef struct FC2_RJT_PARAM {
        uchar_t rjt_action;
        uchar_t rjt_reason;
        uchar_t reserved[2];
} aFC2_RJT_PARAM;

#define INVALID_D_ID            0x01
#define INVALID_S_ID            0x02
#define NPORT_NOT_AVAIL_TEMP    0x03
#define NPORT_NOT_AVAIL_PERM    0x04
#define CLASS_NOT_SUPPORTED     0x05
#define DELIMITER_ERROR         0x06
#define TYPE_NOT_SUPPORTED      0x07
#define INVALID_LINK_CONTROL    0x08
#define INVALID_R_CTL           0x09
#define INVALID_F_CTL           0x0a
#define INVALID_OX_ID           0x0b
#define INVALID_RX_ID           0x0c
#define INVALID_SEQ_ID          0x0d
#define INVALID_DF_CTL          0x0e
#define INVALID_SEQ_CNT         0x0f
#define INVALID_PARAMETER       0x10
#define EXCHANGE_ERROR          0x11
#define PROTOCOL_ERROR          0x12
#define INCORRECT_LENGTH        0x13
#define UNEXPECTED_ACK          0x14
#define UNEXPECTED_LINK_RESP    0x15
#define LOGIN_REQUIRED          0x16
#define EXCESSIVE_SEQUENCES     0x17
#define CANT_ESTABLISH_EXCHANGE 0x18
#define SECURITY_NOT_SUPPORTED  0x19

/* BA_RJT and LS_RJT reason codes */
#define RJT_INVALID_CMD_CODE    0x01
#define RJT_LOGICAL_ERROR       0x03
#define RJT_LOGICAL_BUSY        0x05
#define RJT_PROTOCOL_ERR        0x07
#define RJT_CANT_PERFORM_RQST   0x09
#define RJT_CMD_NOT_SUPPORTED   0x0b


/*
 * Frame Payloads that the SOC understands
 * Transfer Ready:
 */

typedef struct Xfer_Rdy {
        int32_t seq_ro;
        int32_t burst_len;
        int32_t reserved;
} aXFER_RDY, *XFER_RDYptr;

/*
 * Extended Link Service Payload
 */

/* Arbitrary upper limit for now... */
#define FC_MAX_ELS      (60-4)

typedef struct ELS_payload {
        union els_cmd_u {
            struct {
                uchar_t ls_command;
                uchar_t reserved[3];
            } c;
            uint32_t i;
        } els_cmd;
        uchar_t els_data[FC_MAX_ELS];
} els_payload_t;


/*
 * Data segment definition
 */
typedef struct fc_dataseg {
        uint32_t        fc_base;        /* Address of buffer. */
        uint32_t        fc_count;       /* Length of buffer. */
} fc_dataseg_t;

#ifdef  __cplusplus
}
#endif

#endif  /* !_SYS_FC4_FCAL_H */