/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* Copyright 2015 QLogic Corporation */ /* * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _QL_APPS_H #define _QL_APPS_H /* * ISP2xxx Solaris Fibre Channel Adapter (FCA) driver header file. * * *********************************************************************** * * ** * * NOTICE ** * * COPYRIGHT (C) 1996-2015 QLOGIC CORPORATION ** * * ALL RIGHTS RESERVED ** * * ** * *********************************************************************** * */ #ifdef __cplusplus extern "C" { #endif #include <sys/scsi/scsi_types.h> /* f/w trace sizes */ #define FWEXTSIZE (0x4000 * 4) /* bytes - 16kb multiples */ #define FWFCESIZE (0x4000 * 4) /* bytes - 16kb multiples */ /* * ISP8100 Extended Initialization Control Block */ typedef struct ql_ext_icb_8100 { uint8_t version[2]; /* * BIT 0 = FCF VLAN ID Match * BIT 1 = FCF Fabric Name Match * BIT 2-7 = Reserved */ uint8_t fcf_vlan_match; uint8_t reserved_6[3]; uint8_t fcf_vlan_id[2]; uint8_t fcf_fabric_name[8]; uint8_t reserved_7[14]; uint8_t spma_proposed_mac_address[6]; uint8_t reserved_8[28]; } ql_ext_icb_8100_t; /* * Name: Adapter Revsion Level Structure * * Purpose: Supply various revision levels of h/w and driver * * Used by: * qlctest utility * */ typedef struct ql_adapter_revlvl { uint16_t isp2200; /* 2200 chip rev level */ uint16_t risc; /* risc rev level */ uint16_t frmbfr; /* frame buffer rev level */ uint16_t riscrom; /* risc rom rev level */ char qlddv[16]; /* ql driver version string */ } ql_adapter_revlvl_t; /* * Name: Application Mailbox Interface Structure * * Purpose: Used to pass mailbox data between app and driver. * * Used by: * qlctest utility * */ typedef struct app_mbx_cmd { uint16_t mb[32]; uint8_t reserved1[32]; } app_mbx_cmd_t; /* * Name: Diagnostic Loopback Parameter Structure * * Purpose: Used for loopback parameter data * * Used by: * qlctest utility * */ #ifndef apps_64bit typedef struct lbp { uint16_t options; uint32_t transfer_count; uint16_t transfer_segment_count; uint16_t receive_segment_count; uint32_t transfer_data_address; uint32_t receive_data_address; uint32_t iteration_count; } lbp_t; #else typedef struct lbp { uint16_t options; uint32_t transfer_count; uint16_t transfer_segment_count; uint16_t receive_segment_count; uint64_t transfer_data_address; uint64_t receive_data_address; uint32_t iteration_count; } lbp_t; #endif /* * Defines used by: * qlctest utility * * Prupose: * diag switch clause hooks provided for requested diagnostic * functionality (Check command Queue, Revision Level, Firmwware * Checksum, Self Test, Loopback Mailbox, Loopback Data, Execute * Firmware and send ECHO. */ #define QL_DIAG_CHKCMDQUE 0 #define QL_DIAG_FMWCHKSUM 1 #define QL_DIAG_SLFTST 2 #define QL_DIAG_REVLVL 3 #define QL_DIAG_LPBMBX 4 #define QL_DIAG_LPBDTA 5 #define QL_DIAG_EXEFMW 6 #define QL_GET_ADAPTER_FEATURE_BITS 7 #define QL_SET_ADAPTER_FEATURE_BITS 8 #define QL_SET_ADAPTER_NVRAM_DEFAULTS 9 #define QL_DIAG_ECHO 10 /* * Defines used for: * qladm utility * qlctest utility * * Purpose: * Driver IOCTL numbers for nvram dump/load, and driverop * functions. NB: 300 --> 399 are reserved for qla2x00 foapi's */ #define QL_UTIL_LOAD 100 #define QL_UTIL_DUMP 101 #define QL_FOAPI_START 300 #define QL_FOAPI_END 399 #define QL_ADM_OP 402 /* * Purpose: * QLA_ADM_OP command definitions * * Used by: * qladm utility * qlctest utility */ typedef enum ql_adm_cmd { QL_EXTENDED_LOGGING, QL_ADAPTER_INFO, QL_DEVICE_LIST, QL_LOOP_RESET, QL_FW_DUMP, QL_FW_DUMP_TRIGGER, QL_BEACON_ENABLE, QL_BEACON_DISABLE, QL_NVRAM_LOAD, QL_NVRAM_DUMP, QL_FLASH_LOAD, QL_PROP_UPDATE_INT, QL_UPDATE_PROPERTIES, QL_VPD_LOAD, QL_VPD_DUMP, QL_VPD_GETTAG, QL_UPD_FWMODULE } ql_adm_cmd_t; /* * Purpose: * QLA_ADM_OP Parameter Interface Structure * * Used by: * qladm utility * qlctest utility */ typedef struct ql_adm_op { uint64_t buffer; uint32_t length; uint32_t option; ql_adm_cmd_t cmd; /* driver_op command */ } ql_adm_op_t; /* * Purpose: * QLA_ADM_OP parameter data structure * * Used by: * qladm utility * qlctest utility */ #define MAX_PROP_LENGTH 256 typedef struct ql_adapter_info { uint8_t wwpn[8]; uint32_t d_id; uint32_t flash_size; uint16_t device_id; char fw_ver[MAX_PROP_LENGTH]; char fcode_ver[MAX_PROP_LENGTH]; char driver_ver[MAX_PROP_LENGTH]; } ql_adapter_info_t; /* * Purpose: * QLA_ADM_OP data types (Fibre channel port types) * * Used by: * qladm utility * qlctest utility */ typedef enum ql_port_type { FCT_UNKNOWN, FCT_TAPE, FCT_INITIATOR, FCT_TARGET } ql_port_type_t; /* * Purpose: * QLA_ADM_OP Device Information Structure * * Used by: * qladm utility * qlctest utility */ typedef struct ql_device_info { uint8_t wwpn[8]; uint32_t address; ql_port_type_t type; uint16_t loop_id; } ql_device_info_t; #ifdef __cplusplus } #endif #endif /* _QL_APPS_H */
