/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, v.1,  (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://opensource.org/licenses/CDDL-1.0.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/

/*
* Copyright 2014-2017 Cavium, Inc. 
* The contents of this file are subject to the terms of the Common Development 
* and Distribution License, v.1,  (the "License").

* You may not use this file except in compliance with the License.

* You can obtain a copy of the License at available 
* at http://opensource.org/licenses/CDDL-1.0

* See the License for the specific language governing permissions and 
* limitations under the License.
*/

#ifndef __ECORE_L2_API_H__
#define __ECORE_L2_API_H__

#include "ecore_status.h"
#include "ecore_sp_api.h"
#include "ecore_int_api.h"

#ifndef __EXTRACT__LINUX__
enum ecore_rss_caps {
        ECORE_RSS_IPV4          = 0x1,
        ECORE_RSS_IPV6          = 0x2,
        ECORE_RSS_IPV4_TCP      = 0x4,
        ECORE_RSS_IPV6_TCP      = 0x8,
        ECORE_RSS_IPV4_UDP      = 0x10,
        ECORE_RSS_IPV6_UDP      = 0x20,
};

/* Should be the same as ETH_RSS_IND_TABLE_ENTRIES_NUM */
#define ECORE_RSS_IND_TABLE_SIZE 128
#define ECORE_RSS_KEY_SIZE 10 /* size in 32b chunks */

#define ECORE_MAX_PHC_DRIFT_PPB 291666666

enum ecore_ptp_filter_type {
        ECORE_PTP_FILTER_L2,
        ECORE_PTP_FILTER_IPV4,
        ECORE_PTP_FILTER_IPV4_IPV6,
        ECORE_PTP_FILTER_L2_IPV4_IPV6
};

#endif

#ifndef __EXTRACT__LINUX__
struct ecore_queue_start_common_params {
        /* Should always be relative to entity sending this. */
        u8 vport_id;
        u16 queue_id;

        /* Relative, but relevant only for PFs */
        u8 stats_id;

        struct ecore_sb_info *p_sb;
        u8 sb_idx;
};

struct ecore_rxq_start_ret_params {
        void OSAL_IOMEM *p_prod;
        void *p_handle;
};

struct ecore_txq_start_ret_params {
        void OSAL_IOMEM *p_doorbell;
        void *p_handle;
};
#endif

struct ecore_rss_params {
        u8 update_rss_config;
        u8 rss_enable;
        u8 rss_eng_id;
        u8 update_rss_capabilities;
        u8 update_rss_ind_table;
        u8 update_rss_key;
        u8 rss_caps;
        u8 rss_table_size_log; /* The table size is 2 ^ rss_table_size_log */

        /* Indirection table consist of rx queue handles */
        void *rss_ind_table[ECORE_RSS_IND_TABLE_SIZE];
        u32 rss_key[ECORE_RSS_KEY_SIZE];
};

struct ecore_sge_tpa_params {
        u8 max_buffers_per_cqe;

        u8 update_tpa_en_flg;
        u8 tpa_ipv4_en_flg;
        u8 tpa_ipv6_en_flg;
        u8 tpa_ipv4_tunn_en_flg;
        u8 tpa_ipv6_tunn_en_flg;

        u8 update_tpa_param_flg;
        u8 tpa_pkt_split_flg;
        u8 tpa_hdr_data_split_flg;
        u8 tpa_gro_consistent_flg;
        u8 tpa_max_aggs_num;
        u16 tpa_max_size;
        u16 tpa_min_size_to_start;
        u16 tpa_min_size_to_cont;
};

enum ecore_filter_opcode {
        ECORE_FILTER_ADD,
        ECORE_FILTER_REMOVE,
        ECORE_FILTER_MOVE,
        ECORE_FILTER_REPLACE, /* Delete all MACs and add new one instead */
        ECORE_FILTER_FLUSH, /* Removes all filters */
};

enum ecore_filter_ucast_type {
        ECORE_FILTER_MAC,
        ECORE_FILTER_VLAN,
        ECORE_FILTER_MAC_VLAN,
        ECORE_FILTER_INNER_MAC,
        ECORE_FILTER_INNER_VLAN,
        ECORE_FILTER_INNER_PAIR,
        ECORE_FILTER_INNER_MAC_VNI_PAIR,
        ECORE_FILTER_MAC_VNI_PAIR,
        ECORE_FILTER_VNI,
};

struct ecore_filter_ucast {
        enum ecore_filter_opcode opcode;
        enum ecore_filter_ucast_type type;
        u8 is_rx_filter;
        u8 is_tx_filter;
        u8 vport_to_add_to;
        u8 vport_to_remove_from;
        unsigned char mac[ETH_ALEN];
        u8 assert_on_error;
        u16 vlan;
        u32 vni;
};

struct ecore_filter_mcast {
        /* MOVE is not supported for multicast */
        enum ecore_filter_opcode opcode;
        u8 vport_to_add_to;
        u8 vport_to_remove_from;
        u8      num_mc_addrs;
#define ECORE_MAX_MC_ADDRS      64
        unsigned char mac[ECORE_MAX_MC_ADDRS][ETH_ALEN];
};

struct ecore_filter_accept_flags {
        u8 update_rx_mode_config;
        u8 update_tx_mode_config;
        u8 rx_accept_filter;
        u8 tx_accept_filter;
#define ECORE_ACCEPT_NONE               0x01
#define ECORE_ACCEPT_UCAST_MATCHED      0x02
#define ECORE_ACCEPT_UCAST_UNMATCHED    0x04
#define ECORE_ACCEPT_MCAST_MATCHED      0x08
#define ECORE_ACCEPT_MCAST_UNMATCHED    0x10
#define ECORE_ACCEPT_BCAST              0x20
};

struct ecore_arfs_config_params {
        bool tcp;
        bool udp;
        bool ipv4;
        bool ipv6;
        bool arfs_enable;       /* Enable or disable arfs mode */
};

/* Add / remove / move / remove-all unicast MAC-VLAN filters.
 * FW will assert in the following cases, so driver should take care...:
 * 1. Adding a filter to a full table.
 * 2. Adding a filter which already exists on that vport.
 * 3. Removing a filter which doesn't exist.
 */

enum _ecore_status_t
ecore_filter_ucast_cmd(struct ecore_dev *p_dev,
                       struct ecore_filter_ucast *p_filter_cmd,
                       enum spq_mode comp_mode,
                       struct ecore_spq_comp_cb *p_comp_data);

/* Add / remove / move multicast MAC filters. */
enum _ecore_status_t
ecore_filter_mcast_cmd(struct ecore_dev *p_dev,
                       struct ecore_filter_mcast *p_filter_cmd,
                       enum spq_mode comp_mode,
                       struct ecore_spq_comp_cb *p_comp_data);

/* Set "accept" filters */
enum _ecore_status_t
ecore_filter_accept_cmd(
        struct ecore_dev                 *p_dev,
        u8                               vport,
        struct ecore_filter_accept_flags accept_flags,
        u8                               update_accept_any_vlan,
        u8                               accept_any_vlan,
        enum spq_mode                    comp_mode,
        struct ecore_spq_comp_cb         *p_comp_data);

/**
 * @brief ecore_eth_rx_queue_start - RX Queue Start Ramrod
 *
 * This ramrod initializes an RX Queue for a VPort. An Assert is generated if
 * the VPort ID is not currently initialized.
 *
 * @param p_hwfn
 * @param opaque_fid
 * @p_params                    Inputs; Relative for PF [SB being an exception]
 * @param bd_max_bytes          Maximum bytes that can be placed on a BD
 * @param bd_chain_phys_addr    Physical address of BDs for receive.
 * @param cqe_pbl_addr          Physical address of the CQE PBL Table.
 * @param cqe_pbl_size          Size of the CQE PBL Table
 * @param p_ret_params          Pointed struct to be filled with outputs.
 *
 * @return enum _ecore_status_t
 */
enum _ecore_status_t
ecore_eth_rx_queue_start(struct ecore_hwfn *p_hwfn,
                         u16 opaque_fid,
                         struct ecore_queue_start_common_params *p_params,
                         u16 bd_max_bytes,
                         dma_addr_t bd_chain_phys_addr,
                         dma_addr_t cqe_pbl_addr,
                         u16 cqe_pbl_size,
                         struct ecore_rxq_start_ret_params *p_ret_params);

/**
 * @brief ecore_eth_rx_queue_stop - This ramrod closes an Rx queue
 *
 * @param p_hwfn
 * @param p_rxq                 Handler of queue to close
 * @param eq_completion_only    If True completion will be on
 *                              EQe, if False completion will be
 *                              on EQe if p_hwfn opaque
 *                              different from the RXQ opaque
 *                              otherwise on CQe.
 * @param cqe_completion        If True completion will be
 *                              recieve on CQe.
 * @return enum _ecore_status_t
 */
enum _ecore_status_t
ecore_eth_rx_queue_stop(struct ecore_hwfn *p_hwfn,
                        void *p_rxq,
                        bool eq_completion_only,
                        bool cqe_completion);

/**
 * @brief - TX Queue Start Ramrod
 *
 * This ramrod initializes a TX Queue for a VPort. An Assert is generated if
 * the VPort is not currently initialized.
 *
 * @param p_hwfn
 * @param opaque_fid
 * @p_params
 * @param tc                    traffic class to use with this L2 txq
 * @param pbl_addr              address of the pbl array
 * @param pbl_size              number of entries in pbl
 * @oaram p_ret_params          Pointer to fill the return parameters in.
 *
 * @return enum _ecore_status_t
 */
enum _ecore_status_t
ecore_eth_tx_queue_start(struct ecore_hwfn *p_hwfn,
                         u16 opaque_fid,
                         struct ecore_queue_start_common_params *p_params,
                         u8 tc,
                         dma_addr_t pbl_addr,
                         u16 pbl_size,
                         struct ecore_txq_start_ret_params *p_ret_params);

/**
 * @brief ecore_eth_tx_queue_stop - closes a Tx queue
 *
 * @param p_hwfn
 * @param p_txq - handle to Tx queue needed to be closed
 *
 * @return enum _ecore_status_t
 */
enum _ecore_status_t ecore_eth_tx_queue_stop(struct ecore_hwfn *p_hwfn,
                                             void *p_txq);

enum ecore_tpa_mode     {
        ECORE_TPA_MODE_NONE,
        ECORE_TPA_MODE_RSC,
        ECORE_TPA_MODE_GRO,
        ECORE_TPA_MODE_MAX
};

struct ecore_sp_vport_start_params {
        enum ecore_tpa_mode tpa_mode;
        bool remove_inner_vlan; /* Inner VLAN removal is enabled */
        bool tx_switching;      /* Vport supports tx-switching */
        bool handle_ptp_pkts;   /* Handle PTP packets */
        bool only_untagged;     /* Untagged pkt control */
        bool drop_ttl0;         /* Drop packets with TTL = 0 */
        u8 max_buffers_per_cqe;
        u32 concrete_fid;
        u16 opaque_fid;
        u8 vport_id;            /* VPORT ID */
        u16 mtu;                /* VPORT MTU */
        bool zero_placement_offset;
        bool check_mac;
        bool check_ethtype;

        /* Strict behavior on transmission errors */
        bool b_err_illegal_vlan_mode;
        bool b_err_illegal_inband_mode;
        bool b_err_vlan_insert_with_inband;
        bool b_err_small_pkt;
        bool b_err_big_pkt;
        bool b_err_anti_spoof;
        bool b_err_ctrl_frame;
};

/**
 * @brief ecore_sp_vport_start -
 *
 * This ramrod initializes a VPort. An Assert if generated if the Function ID
 * of the VPort is not enabled.
 *
 * @param p_hwfn
 * @param p_params              VPORT start params
 *
 * @return enum _ecore_status_t
 */
enum _ecore_status_t
ecore_sp_vport_start(struct ecore_hwfn *p_hwfn,
                     struct ecore_sp_vport_start_params *p_params);

struct ecore_sp_vport_update_params {
        u16                     opaque_fid;
        u8                      vport_id;
        u8                      update_vport_active_rx_flg;
        u8                      vport_active_rx_flg;
        u8                      update_vport_active_tx_flg;
        u8                      vport_active_tx_flg;
        u8                      update_inner_vlan_removal_flg;
        u8                      inner_vlan_removal_flg;
        u8                      silent_vlan_removal_flg;
        u8                      update_default_vlan_enable_flg;
        u8                      default_vlan_enable_flg;
        u8                      update_default_vlan_flg;
        u16                     default_vlan;
        u8                      update_tx_switching_flg;
        u8                      tx_switching_flg;
        u8                      update_approx_mcast_flg;
        u8                      update_anti_spoofing_en_flg;
        u8                      anti_spoofing_en;
        u8                      update_accept_any_vlan_flg;
        u8                      accept_any_vlan;
        unsigned long           bins[8];
        struct ecore_rss_params *rss_params;
        struct ecore_filter_accept_flags accept_flags;
        struct ecore_sge_tpa_params *sge_tpa_params;
};

/**
 * @brief ecore_sp_vport_update -
 *
 * This ramrod updates the parameters of the VPort. Every field can be updated
 * independently, according to flags.
 *
 * This ramrod is also used to set the VPort state to active after creation.
 * An Assert is generated if the VPort does not contain an RX queue.
 *
 * @param p_hwfn
 * @param p_params
 *
 * @return enum _ecore_status_t
 */
enum _ecore_status_t
ecore_sp_vport_update(struct ecore_hwfn *p_hwfn,
                      struct ecore_sp_vport_update_params *p_params,
                      enum spq_mode comp_mode,
                      struct ecore_spq_comp_cb *p_comp_data);
/**
 * @brief ecore_sp_vport_stop -
 *
 * This ramrod closes a VPort after all its RX and TX queues are terminated.
 * An Assert is generated if any queues are left open.
 *
 * @param p_hwfn
 * @param opaque_fid
 * @param vport_id VPort ID
 *
 * @return enum _ecore_status_t
 */
enum _ecore_status_t ecore_sp_vport_stop(struct ecore_hwfn *p_hwfn,
                                         u16 opaque_fid,
                                         u8 vport_id);

enum _ecore_status_t
ecore_sp_eth_filter_ucast(struct ecore_hwfn *p_hwfn,
                          u16 opaque_fid,
                          struct ecore_filter_ucast *p_filter_cmd,
                          enum spq_mode comp_mode,
                          struct ecore_spq_comp_cb *p_comp_data);

/**
 * @brief ecore_sp_rx_eth_queues_update -
 *
 * This ramrod updates an RX queue. It is used for setting the active state
 * of the queue and updating the TPA and SGE parameters.
 *
 * @note Final phase API.
 *
 * @param p_hwfn
 * @param pp_rxq_handlers       An array of queue handlers to be updated.
 * @param num_rxqs              number of queues to update.
 * @param complete_cqe_flg      Post completion to the CQE Ring if set
 * @param complete_event_flg    Post completion to the Event Ring if set
 * @param comp_mode
 * @param p_comp_data
 *
 * @return enum _ecore_status_t
 */

enum _ecore_status_t
ecore_sp_eth_rx_queues_update(struct ecore_hwfn *p_hwfn,
                              void **pp_rxq_handlers,
                              u8 num_rxqs,
                              u8 complete_cqe_flg,
                              u8 complete_event_flg,
                              enum spq_mode comp_mode,
                              struct ecore_spq_comp_cb *p_comp_data);

void __ecore_get_vport_stats(struct ecore_hwfn *p_hwfn,
                             struct ecore_ptt *p_ptt,
                             struct ecore_eth_stats *stats,
                             u16 statistics_bin, bool b_get_port_stats);

void ecore_get_vport_stats(struct ecore_dev *p_dev,
                           struct ecore_eth_stats *stats);

void ecore_reset_vport_stats(struct ecore_dev *p_dev);

/**
 *@brief ecore_arfs_mode_configure -
 *
 *Enable or disable rfs mode. It must accept atleast one of tcp or udp true
 *and atleast one of ipv4 or ipv6 true to enable rfs mode.
 *
 *@param p_hwfn
 *@param p_ptt
 *@param p_cfg_params           arfs mode configuration parameters.
 *
 */
void ecore_arfs_mode_configure(struct ecore_hwfn *p_hwfn,
                               struct ecore_ptt *p_ptt,
                               struct ecore_arfs_config_params *p_cfg_params);
#endif