/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License, v.1, (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2014-2017 Cavium, Inc. * The contents of this file are subject to the terms of the Common Development * and Distribution License, v.1, (the "License"). * You may not use this file except in compliance with the License. * You can obtain a copy of the License at available * at http://opensource.org/licenses/CDDL-1.0 * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef __ECORE_MCP_H__ #define __ECORE_MCP_H__ #include "bcm_osal.h" #include "mcp_public.h" #include "ecore.h" #include "ecore_mcp_api.h" #include "ecore_dev_api.h" /* Using hwfn number (and not pf_num) is required since in CMT mode, * same pf_num may be used by two different hwfn * TODO - this shouldn't really be in .h file, but until all fields * required during hw-init will be placed in their correct place in shmem * we need it in ecore_dev.c [for readin the nvram reflection in shmem]. */ #define MCP_PF_ID_BY_REL(p_hwfn, rel_pfid) (ECORE_IS_BB((p_hwfn)->p_dev) ? \ ((rel_pfid) | \ ((p_hwfn)->abs_pf_id & 1) << 3) : \ rel_pfid) #define MCP_PF_ID(p_hwfn) MCP_PF_ID_BY_REL(p_hwfn, (p_hwfn)->rel_pf_id) #define MFW_PORT(_p_hwfn) ((_p_hwfn)->abs_pf_id % \ ((_p_hwfn)->p_dev->num_ports_in_engine * \ ecore_device_num_engines((_p_hwfn)->p_dev))) struct ecore_mcp_info { /* Spinlock used for protecting the access to the MFW mailbox */ osal_spinlock_t lock; /* Spinglock used for syncing SW link-changes and link-changes * originating from attention context. */ osal_spinlock_t link_lock; /* Flag to indicate whether sending a MFW mailbox is forbidden */ bool block_mb_sending; /* Address of the MCP public area */ u32 public_base; /* Address of the driver mailbox */ u32 drv_mb_addr; /* Address of the MFW mailbox */ u32 mfw_mb_addr; /* Address of the port configuration (link) */ u32 port_addr; /* Current driver mailbox sequence */ u16 drv_mb_seq; /* Current driver pulse sequence */ u16 drv_pulse_seq; struct ecore_mcp_link_params link_input; struct ecore_mcp_link_state link_output; struct ecore_mcp_link_capabilities link_capabilities; struct ecore_mcp_function_info func_info; u8 *mfw_mb_cur; u8 *mfw_mb_shadow; u16 mfw_mb_length; u16 mcp_hist; /* Capabilties negotiated with the MFW */ u32 capabilities; }; struct ecore_mcp_mb_params { u32 cmd; u32 param; void *p_data_src; u8 data_src_size; void *p_data_dst; u8 data_dst_size; u32 mcp_resp; u32 mcp_param; }; enum ecore_ov_eswitch { ECORE_OV_ESWITCH_NONE, ECORE_OV_ESWITCH_VEB, ECORE_OV_ESWITCH_VEPA }; struct ecore_drv_tlv_hdr { u8 tlv_type; /* According to the enum below */ u8 tlv_length; /* In dwords - not including this header */ u8 tlv_reserved; #define ECORE_DRV_TLV_FLAGS_CHANGED 0x01 u8 tlv_flags; }; /** * @brief Initialize the interface with the MCP * * @param p_hwfn - HW func * @param p_ptt - PTT required for register access * * @return enum _ecore_status_t */ enum _ecore_status_t ecore_mcp_cmd_init(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief Intialize the port interface with the MCP * * @param p_hwfn * @param p_ptt * Can only be called after `num_ports_in_engine' is set */ void ecore_mcp_cmd_port_init(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief Releases resources allocated during the init process. * * @param p_hwfn - HW func * @param p_ptt - PTT required for register access * * @return enum _ecore_status_t */ enum _ecore_status_t ecore_mcp_free(struct ecore_hwfn *p_hwfn); /** * @brief This function is called from the DPC context. After * pointing PTT to the mfw mb, check for events sent by the MCP * to the driver and ack them. In case a critical event * detected, it will be handled here, otherwise the work will be * queued to a sleepable work-queue. * * @param p_hwfn - HW function * @param p_ptt - PTT required for register access * @return enum _ecore_status_t - ECORE_SUCCESS - operation * was successul. */ enum _ecore_status_t ecore_mcp_handle_events(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief When MFW doesn't get driver pulse for couple of seconds, at some * threshold before timeout expires, it will generate interrupt * through a dedicated status block (DPSB - Driver Pulse Status * Block), which the driver should respond immediately, by * providing keepalive indication after setting the PTT to the * driver-MFW mailbox. This function is called directly from the * DPC upon receiving the DPSB attention. * * @param p_hwfn - hw function * @param p_ptt - PTT required for register access * @return enum _ecore_status_t - ECORE_SUCCESS - operation * was successful. */ enum _ecore_status_t ecore_issue_pulse(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); enum ecore_drv_role { ECORE_DRV_ROLE_OS, ECORE_DRV_ROLE_KDUMP, }; struct ecore_load_req_params { /* Input params */ enum ecore_drv_role drv_role; u8 timeout_val; /* 1..254, '0' - default value, '255' - no timeout */ bool avoid_eng_reset; enum ecore_override_force_load override_force_load; /* Output params */ u32 load_code; }; /** * @brief Sends a LOAD_REQ to the MFW, and in case the operation succeeds, * returns whether this PF is the first on the engine/port or function. * * @param p_hwfn * @param p_ptt * @param p_params * * @return enum _ecore_status_t - ECORE_SUCCESS - Operation was successful. */ enum _ecore_status_t ecore_mcp_load_req(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, struct ecore_load_req_params *p_params); /** * @brief Sends a UNLOAD_REQ message to the MFW * * @param p_hwfn * @param p_ptt * * @return enum _ecore_status_t - ECORE_SUCCESS - Operation was successful. */ enum _ecore_status_t ecore_mcp_unload_req(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief Sends a UNLOAD_DONE message to the MFW * * @param p_hwfn * @param p_ptt * * @return enum _ecore_status_t - ECORE_SUCCESS - Operation was successful. */ enum _ecore_status_t ecore_mcp_unload_done(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief Read the MFW mailbox into Current buffer. * * @param p_hwfn * @param p_ptt */ void ecore_mcp_read_mb(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief Ack to mfw that driver finished FLR process for VFs * * @param p_hwfn * @param p_ptt * @param vfs_to_ack - bit mask of all engine VFs for which the PF acks. * * @param return enum _ecore_status_t - ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_ack_vf_flr(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, u32 *vfs_to_ack); /** * @brief - calls during init to read shmem of all function-related info. * * @param p_hwfn * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_fill_shmem_func_info(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief - Reset the MCP using mailbox command. * * @param p_hwfn * @param p_ptt * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_reset(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief - Sends an NVM write command request to the MFW with * payload. * * @param p_hwfn * @param p_ptt * @param cmd - Command: Either DRV_MSG_CODE_NVM_WRITE_NVRAM or * DRV_MSG_CODE_NVM_PUT_FILE_DATA * @param param - [0:23] - Offset [24:31] - Size * @param o_mcp_resp - MCP response * @param o_mcp_param - MCP response param * @param i_txn_size - Buffer size * @param i_buf - Pointer to the buffer * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_nvm_wr_cmd(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, u32 cmd, u32 param, u32 *o_mcp_resp, u32 *o_mcp_param, u32 i_txn_size, u32 *i_buf); /** * @brief - Sends an NVM read command request to the MFW to get * a buffer. * * @param p_hwfn * @param p_ptt * @param cmd - Command: DRV_MSG_CODE_NVM_GET_FILE_DATA or * DRV_MSG_CODE_NVM_READ_NVRAM commands * @param param - [0:23] - Offset [24:31] - Size * @param o_mcp_resp - MCP response * @param o_mcp_param - MCP response param * @param o_txn_size - Buffer size output * @param o_buf - Pointer to the buffer returned by the MFW. * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_nvm_rd_cmd(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, u32 cmd, u32 param, u32 *o_mcp_resp, u32 *o_mcp_param, u32 *o_txn_size, u32 *o_buf); /** * @brief indicates whether the MFW objects [under mcp_info] are accessible * * @param p_hwfn * * @return true iff MFW is running and mcp_info is initialized */ bool ecore_mcp_is_init(struct ecore_hwfn *p_hwfn); /** * @brief request MFW to configure MSI-X for a VF * * @param p_hwfn * @param p_ptt * @param vf_id - absolute inside engine * @param num_sbs - number of entries to request * * @return enum _ecore_status_t */ enum _ecore_status_t ecore_mcp_config_vf_msix(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, u8 vf_id, u8 num); /** * @brief - Halt the MCP. * * @param p_hwfn * @param p_ptt * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_halt(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief - Wake up the MCP. * * @param p_hwfn * @param p_ptt * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_resume(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); int __ecore_configure_pf_max_bandwidth(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, struct ecore_mcp_link_state *p_link, u8 max_bw); int __ecore_configure_pf_min_bandwidth(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, struct ecore_mcp_link_state *p_link, u8 min_bw); enum _ecore_status_t ecore_mcp_mask_parities(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, u32 mask_parities); #if 0 enum _ecore_status_t ecore_hw_init_first_eth(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, u8 *p_pf); #endif /** * @brief - Sends crash mdump related info to the MFW. * * @param p_hwfn * @param p_ptt * @param epoch * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_mdump_set_values(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, u32 epoch); /** * @brief - Triggers a MFW crash dump procedure. * * @param p_hwfn * @param p_ptt * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_mdump_trigger(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); struct ecore_mdump_retain_data { u32 valid; u32 epoch; u32 pf; u32 status; }; /** * @brief - Gets the mdump retained data from the MFW. * * @param p_hwfn * @param p_ptt * @param p_mdump_retain * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_mdump_get_retain(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, struct ecore_mdump_retain_data *p_mdump_retain); /** * @brief - Clear the mdump retained data. * * @param p_hwfn * @param p_ptt * * @param return ECORE_SUCCESS upon success. */ enum _ecore_status_t ecore_mcp_mdump_clr_retain(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief - Sets the MFW's max value for the given resource * * @param p_hwfn * @param p_ptt * @param res_id * @param resc_max_val * @param p_mcp_resp * * @return enum _ecore_status_t - ECORE_SUCCESS - operation was successful. */ enum _ecore_status_t ecore_mcp_set_resc_max_val(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, enum ecore_resources res_id, u32 resc_max_val, u32 *p_mcp_resp); /** * @brief - Gets the MFW allocation info for the given resource * * @param p_hwfn * @param p_ptt * @param res_id * @param p_mcp_resp * @param p_resc_num * @param p_resc_start * * @return enum _ecore_status_t - ECORE_SUCCESS - operation was successful. */ enum _ecore_status_t ecore_mcp_get_resc_info(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, enum ecore_resources res_id, u32 *p_mcp_resp, u32 *p_resc_num, u32 *p_resc_start); /** * @brief - Initiates PF FLR * * @param p_hwfn * @param p_ptt * * @return enum _ecore_status_t - ECORE_SUCCESS - operation was successful. */ enum _ecore_status_t ecore_mcp_initiate_pf_flr(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief Send eswitch mode to MFW * * @param p_hwfn * @param p_ptt * @param eswitch - eswitch mode * * @return enum _ecore_status_t - ECORE_SUCCESS - operation was successful. */ enum _ecore_status_t ecore_mcp_ov_update_eswitch(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, enum ecore_ov_eswitch eswitch); #define ECORE_MCP_RESC_LOCK_MIN_VAL RESOURCE_DUMP /* 0 */ #define ECORE_MCP_RESC_LOCK_MAX_VAL 31 enum ecore_resc_lock { ECORE_RESC_LOCK_DBG_DUMP = ECORE_MCP_RESC_LOCK_MIN_VAL, /* Locks that the MFW is aware of should be added here downwards */ /* Ecore only locks should be added here upwards */ ECORE_RESC_LOCK_PTP_PORT0, ECORE_RESC_LOCK_PTP_PORT1, ECORE_RESC_LOCK_PTP_PORT2, ECORE_RESC_LOCK_PTP_PORT3, ECORE_RESC_LOCK_RESC_ALLOC = ECORE_MCP_RESC_LOCK_MAX_VAL }; struct ecore_resc_lock_params { /* Resource number [valid values are 0..31] */ u8 resource; /* Lock timeout value in seconds [default, none or 1..254] */ u8 timeout; #define ECORE_MCP_RESC_LOCK_TO_DEFAULT 0 #define ECORE_MCP_RESC_LOCK_TO_NONE 255 /* Number of times to retry locking */ u8 retry_num; /* The interval in usec between retries */ u16 retry_interval; /* Use sleep or delay between retries */ bool sleep_b4_retry; /* Will be set as true if the resource is free and granted */ bool b_granted; /* Will be filled with the resource owner. * [0..15 = PF0-15, 16 = MFW, 17 = diag over serial] */ u8 owner; }; /** * @brief Acquires MFW generic resource lock * * @param p_hwfn * @param p_ptt * @param p_params * * @return enum _ecore_status_t - ECORE_SUCCESS - operation was successful. */ enum _ecore_status_t ecore_mcp_resc_lock(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, struct ecore_resc_lock_params *p_params); struct ecore_resc_unlock_params { /* Resource number [valid values are 0..31] */ u8 resource; /* Allow to release a resource even if belongs to another PF */ bool b_force; /* Will be set as true if the resource is released */ bool b_released; }; /** * @brief Releases MFW generic resource lock * * @param p_hwfn * @param p_ptt * @param p_params * * @return enum _ecore_status_t - ECORE_SUCCESS - operation was successful. */ enum _ecore_status_t ecore_mcp_resc_unlock(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, struct ecore_resc_unlock_params *p_params); void ecore_mcp_wol_wr(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt, u32 offset, u32 val); /** * @brief Learn of supported MFW features; To be done during early init * * @param p_hwfn * @param p_ptt */ enum _ecore_status_t ecore_mcp_get_capabilities(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief Inform MFW of set of features supported by driver. Should be done * inside the contet of the LOAD_REQ. * * @param p_hwfn * @param p_ptt */ enum _ecore_status_t ecore_mcp_set_capabilities(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); /** * @brief Initialize MFW mailbox and sequence values for driver interaction. * * @param p_hwfn * @param p_ptt */ enum _ecore_status_t ecore_load_mcp_offsets(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt); #endif /* __ECORE_MCP_H__ */
