/*-
 * SPDX-License-Identifier: ISC
 *
 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
 * Copyright (c) 2002-2008 Atheros Communications, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */
#include "opt_ah.h"

#include "ah.h"
#include "ah_internal.h"
#include "ah_devid.h"
#include "ah_desc.h"                    /* NB: for HAL_PHYERR* */

#include "ar5212/ar5212.h"
#include "ar5212/ar5212reg.h"
#include "ar5212/ar5212phy.h"

#include "ah_eeprom_v3.h"

#define AR_NUM_GPIO     6               /* 6 GPIO pins */
#define AR_GPIOD_MASK   0x0000002F      /* GPIO data reg r/w mask */

void
ar5212GetMacAddress(struct ath_hal *ah, uint8_t *mac)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        OS_MEMCPY(mac, ahp->ah_macaddr, IEEE80211_ADDR_LEN);
}

HAL_BOOL
ar5212SetMacAddress(struct ath_hal *ah, const uint8_t *mac)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        OS_MEMCPY(ahp->ah_macaddr, mac, IEEE80211_ADDR_LEN);
        return AH_TRUE;
}

void
ar5212GetBssIdMask(struct ath_hal *ah, uint8_t *mask)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        OS_MEMCPY(mask, ahp->ah_bssidmask, IEEE80211_ADDR_LEN);
}

HAL_BOOL
ar5212SetBssIdMask(struct ath_hal *ah, const uint8_t *mask)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        /* save it since it must be rewritten on reset */
        OS_MEMCPY(ahp->ah_bssidmask, mask, IEEE80211_ADDR_LEN);

        OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask));
        OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4));
        return AH_TRUE;
}

/*
 * Attempt to change the cards operating regulatory domain to the given value
 */
HAL_BOOL
ar5212SetRegulatoryDomain(struct ath_hal *ah,
        uint16_t regDomain, HAL_STATUS *status)
{
        HAL_STATUS ecode;

        if (AH_PRIVATE(ah)->ah_currentRD == regDomain) {
                ecode = HAL_EINVAL;
                goto bad;
        }
        if (ath_hal_eepromGetFlag(ah, AR_EEP_WRITEPROTECT)) {
                ecode = HAL_EEWRITE;
                goto bad;
        }
#ifdef AH_SUPPORT_WRITE_REGDOMAIN
        if (ath_hal_eepromWrite(ah, AR_EEPROM_REG_DOMAIN, regDomain)) {
                HALDEBUG(ah, HAL_DEBUG_ANY,
                    "%s: set regulatory domain to %u (0x%x)\n",
                    __func__, regDomain, regDomain);
                AH_PRIVATE(ah)->ah_currentRD = regDomain;
                return AH_TRUE;
        }
#endif
        ecode = HAL_EIO;
bad:
        if (status)
                *status = ecode;
        return AH_FALSE;
}

/*
 * Return the wireless modes (a,b,g,t) supported by hardware.
 *
 * This value is what is actually supported by the hardware
 * and is unaffected by regulatory/country code settings.
 */
u_int
ar5212GetWirelessModes(struct ath_hal *ah)
{
        u_int mode = 0;

        if (ath_hal_eepromGetFlag(ah, AR_EEP_AMODE)) {
                mode = HAL_MODE_11A;
                if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO5DISABLE))
                        mode |= HAL_MODE_TURBO | HAL_MODE_108A;
                if (AH_PRIVATE(ah)->ah_caps.halChanHalfRate)
                        mode |= HAL_MODE_11A_HALF_RATE;
                if (AH_PRIVATE(ah)->ah_caps.halChanQuarterRate)
                        mode |= HAL_MODE_11A_QUARTER_RATE;
        }
        if (ath_hal_eepromGetFlag(ah, AR_EEP_BMODE))
                mode |= HAL_MODE_11B;
        if (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE) &&
            AH_PRIVATE(ah)->ah_subvendorid != AR_SUBVENDOR_ID_NOG) {
                mode |= HAL_MODE_11G;
                if (!ath_hal_eepromGetFlag(ah, AR_EEP_TURBO2DISABLE))
                        mode |= HAL_MODE_108G;
                if (AH_PRIVATE(ah)->ah_caps.halChanHalfRate)
                        mode |= HAL_MODE_11G_HALF_RATE;
                if (AH_PRIVATE(ah)->ah_caps.halChanQuarterRate)
                        mode |= HAL_MODE_11G_QUARTER_RATE;
        }
        return mode;
}

/*
 * Set the interrupt and GPIO values so the ISR can disable RF
 * on a switch signal.  Assumes GPIO port and interrupt polarity
 * are set prior to call.
 */
void
ar5212EnableRfKill(struct ath_hal *ah)
{
        uint16_t rfsilent = AH_PRIVATE(ah)->ah_rfsilent;
        int select = MS(rfsilent, AR_EEPROM_RFSILENT_GPIO_SEL);
        int polarity = MS(rfsilent, AR_EEPROM_RFSILENT_POLARITY);

        /*
         * Configure the desired GPIO port for input
         * and enable baseband rf silence.
         */
        ath_hal_gpioCfgInput(ah, select);
        OS_REG_SET_BIT(ah, AR_PHY(0), 0x00002000);
        /*
         * If radio disable switch connection to GPIO bit x is enabled
         * program GPIO interrupt.
         * If rfkill bit on eeprom is 1, setupeeprommap routine has already
         * verified that it is a later version of eeprom, it has a place for
         * rfkill bit and it is set to 1, indicating that GPIO bit x hardware
         * connection is present.
         */
        ath_hal_gpioSetIntr(ah, select,
            (ath_hal_gpioGet(ah, select) == polarity ? !polarity : polarity));
}

/*
 * Change the LED blinking pattern to correspond to the connectivity
 */
void
ar5212SetLedState(struct ath_hal *ah, HAL_LED_STATE state)
{
        static const uint32_t ledbits[8] = {
                AR_PCICFG_LEDCTL_NONE,  /* HAL_LED_INIT */
                AR_PCICFG_LEDCTL_PEND,  /* HAL_LED_SCAN */
                AR_PCICFG_LEDCTL_PEND,  /* HAL_LED_AUTH */
                AR_PCICFG_LEDCTL_ASSOC, /* HAL_LED_ASSOC*/
                AR_PCICFG_LEDCTL_ASSOC, /* HAL_LED_RUN */
                AR_PCICFG_LEDCTL_NONE,
                AR_PCICFG_LEDCTL_NONE,
                AR_PCICFG_LEDCTL_NONE,
        };
        uint32_t bits;

        bits = OS_REG_READ(ah, AR_PCICFG);
        if (IS_2417(ah)) {
                /*
                 * Enable LED for Nala. There is a bit marked reserved
                 * that must be set and we also turn on the power led.
                 * Because we mark s/w LED control setting the control
                 * status bits below is meangless (the driver must flash
                 * the LED(s) using the GPIO lines).
                 */
                bits = (bits &~ AR_PCICFG_LEDMODE)
                     | SM(AR_PCICFG_LEDMODE_POWON, AR_PCICFG_LEDMODE)
#if 0
                     | SM(AR_PCICFG_LEDMODE_NETON, AR_PCICFG_LEDMODE)
#endif
                     | 0x08000000;
        }
        bits = (bits &~ AR_PCICFG_LEDCTL)
             | SM(ledbits[state & 0x7], AR_PCICFG_LEDCTL);
        OS_REG_WRITE(ah, AR_PCICFG, bits);
}

/*
 * Change association related fields programmed into the hardware.
 * Writing a valid BSSID to the hardware effectively enables the hardware
 * to synchronize its TSF to the correct beacons and receive frames coming
 * from that BSSID. It is called by the SME JOIN operation.
 */
void
ar5212WriteAssocid(struct ath_hal *ah, const uint8_t *bssid, uint16_t assocId)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        /* save bssid for possible re-use on reset */
        OS_MEMCPY(ahp->ah_bssid, bssid, IEEE80211_ADDR_LEN);
        ahp->ah_assocId = assocId;
        OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid));
        OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid+4) |
                                     ((assocId & 0x3fff)<<AR_BSS_ID1_AID_S));
}

/*
 * Get the current hardware tsf for stamlme
 */
uint64_t
ar5212GetTsf64(struct ath_hal *ah)
{
        uint32_t low1, low2, u32;

        /* sync multi-word read */
        low1 = OS_REG_READ(ah, AR_TSF_L32);
        u32 = OS_REG_READ(ah, AR_TSF_U32);
        low2 = OS_REG_READ(ah, AR_TSF_L32);
        if (low2 < low1) {      /* roll over */
                /*
                 * If we are not preempted this will work.  If we are
                 * then we re-reading AR_TSF_U32 does no good as the
                 * low bits will be meaningless.  Likewise reading
                 * L32, U32, U32, then comparing the last two reads
                 * to check for rollover doesn't help if preempted--so
                 * we take this approach as it costs one less PCI read
                 * which can be noticeable when doing things like
                 * timestamping packets in monitor mode.
                 */
                u32++;
        }
        return (((uint64_t) u32) << 32) | ((uint64_t) low2);
}

/*
 * Get the current hardware tsf for stamlme
 */
uint32_t
ar5212GetTsf32(struct ath_hal *ah)
{
        return OS_REG_READ(ah, AR_TSF_L32);
}

void
ar5212SetTsf64(struct ath_hal *ah, uint64_t tsf64)
{
        OS_REG_WRITE(ah, AR_TSF_L32, tsf64 & 0xffffffff);
        OS_REG_WRITE(ah, AR_TSF_U32, (tsf64 >> 32) & 0xffffffff);
}

/*
 * Reset the current hardware tsf for stamlme.
 */
void
ar5212ResetTsf(struct ath_hal *ah)
{

        uint32_t val = OS_REG_READ(ah, AR_BEACON);

        OS_REG_WRITE(ah, AR_BEACON, val | AR_BEACON_RESET_TSF);
        /*
         * When resetting the TSF, write twice to the
         * corresponding register; each write to the RESET_TSF bit toggles
         * the internal signal to cause a reset of the TSF - but if the signal
         * is left high, it will reset the TSF on the next chip reset also!
         * writing the bit an even number of times fixes this issue
         */
        OS_REG_WRITE(ah, AR_BEACON, val | AR_BEACON_RESET_TSF);
}

/*
 * Set or clear hardware basic rate bit
 * Set hardware basic rate set if basic rate is found
 * and basic rate is equal or less than 2Mbps
 */
void
ar5212SetBasicRate(struct ath_hal *ah, HAL_RATE_SET *rs)
{
        const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;
        uint32_t reg;
        uint8_t xset;
        int i;

        if (chan == AH_NULL || !IEEE80211_IS_CHAN_CCK(chan))
                return;
        xset = 0;
        for (i = 0; i < rs->rs_count; i++) {
                uint8_t rset = rs->rs_rates[i];
                /* Basic rate defined? */
                if ((rset & 0x80) && (rset &= 0x7f) >= xset)
                        xset = rset;
        }
        /*
         * Set the h/w bit to reflect whether or not the basic
         * rate is found to be equal or less than 2Mbps.
         */
        reg = OS_REG_READ(ah, AR_STA_ID1);
        if (xset && xset/2 <= 2)
                OS_REG_WRITE(ah, AR_STA_ID1, reg | AR_STA_ID1_BASE_RATE_11B);
        else
                OS_REG_WRITE(ah, AR_STA_ID1, reg &~ AR_STA_ID1_BASE_RATE_11B);
}

/*
 * Grab a semi-random value from hardware registers - may not
 * change often
 */
uint32_t
ar5212GetRandomSeed(struct ath_hal *ah)
{
        uint32_t nf;

        nf = (OS_REG_READ(ah, AR_PHY(25)) >> 19) & 0x1ff;
        if (nf & 0x100)
                nf = 0 - ((nf ^ 0x1ff) + 1);
        return (OS_REG_READ(ah, AR_TSF_U32) ^
                OS_REG_READ(ah, AR_TSF_L32) ^ nf);
}

/*
 * Detect if our card is present
 */
HAL_BOOL
ar5212DetectCardPresent(struct ath_hal *ah)
{
        uint16_t macVersion, macRev;
        uint32_t v;

        /*
         * Read the Silicon Revision register and compare that
         * to what we read at attach time.  If the same, we say
         * a card/device is present.
         */
        v = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID;
        macVersion = v >> AR_SREV_ID_S;
        macRev = v & AR_SREV_REVISION;
        return (AH_PRIVATE(ah)->ah_macVersion == macVersion &&
                AH_PRIVATE(ah)->ah_macRev == macRev);
}

void
ar5212EnableMibCounters(struct ath_hal *ah)
{
        /* NB: this just resets the mib counter machinery */
        OS_REG_WRITE(ah, AR_MIBC,
            ~(AR_MIBC_COW | AR_MIBC_FMC | AR_MIBC_CMC | AR_MIBC_MCS) & 0x0f);
}

void 
ar5212DisableMibCounters(struct ath_hal *ah)
{
        OS_REG_WRITE(ah, AR_MIBC,  AR_MIBC | AR_MIBC_CMC);
}

/*
 * Update MIB Counters
 */
void
ar5212UpdateMibCounters(struct ath_hal *ah, HAL_MIB_STATS* stats)
{
        stats->ackrcv_bad += OS_REG_READ(ah, AR_ACK_FAIL);
        stats->rts_bad    += OS_REG_READ(ah, AR_RTS_FAIL);
        stats->fcs_bad    += OS_REG_READ(ah, AR_FCS_FAIL);
        stats->rts_good   += OS_REG_READ(ah, AR_RTS_OK);
        stats->beacons    += OS_REG_READ(ah, AR_BEACON_CNT);
}

/*
 * Detect if the HW supports spreading a CCK signal on channel 14
 */
HAL_BOOL
ar5212IsJapanChannelSpreadSupported(struct ath_hal *ah)
{
        return AH_TRUE;
}

/*
 * Get the rssi of frame curently being received.
 */
uint32_t
ar5212GetCurRssi(struct ath_hal *ah)
{
        return (OS_REG_READ(ah, AR_PHY_CURRENT_RSSI) & 0xff);
}

u_int
ar5212GetDefAntenna(struct ath_hal *ah)
{   
        return (OS_REG_READ(ah, AR_DEF_ANTENNA) & 0x7);
}   

void
ar5212SetDefAntenna(struct ath_hal *ah, u_int antenna)
{
        OS_REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
}

HAL_ANT_SETTING
ar5212GetAntennaSwitch(struct ath_hal *ah)
{
        return AH5212(ah)->ah_antControl;
}

HAL_BOOL
ar5212SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING setting)
{
        struct ath_hal_5212 *ahp = AH5212(ah);
        const struct ieee80211_channel *chan = AH_PRIVATE(ah)->ah_curchan;

        if (!ahp->ah_phyPowerOn || chan == AH_NULL) {
                /* PHY powered off, just stash settings */
                ahp->ah_antControl = setting;
                ahp->ah_diversity = (setting == HAL_ANT_VARIABLE);
                return AH_TRUE;
        }
        return ar5212SetAntennaSwitchInternal(ah, setting, chan);
}

HAL_BOOL
ar5212IsSleepAfterBeaconBroken(struct ath_hal *ah)
{
        return AH_TRUE;
}

HAL_BOOL
ar5212SetSifsTime(struct ath_hal *ah, u_int us)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        if (us > ath_hal_mac_usec(ah, 0xffff)) {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad SIFS time %u\n",
                    __func__, us);
                ahp->ah_sifstime = (u_int) -1;  /* restore default handling */
                return AH_FALSE;
        } else {
                /* convert to system clocks */
                OS_REG_WRITE(ah, AR_D_GBL_IFS_SIFS, ath_hal_mac_clks(ah, us-2));
                ahp->ah_sifstime = us;
                return AH_TRUE;
        }
}

u_int
ar5212GetSifsTime(struct ath_hal *ah)
{
        u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SIFS) & 0xffff;
        return ath_hal_mac_usec(ah, clks)+2;    /* convert from system clocks */
}

HAL_BOOL
ar5212SetSlotTime(struct ath_hal *ah, u_int us)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        if (us < HAL_SLOT_TIME_6 || us > ath_hal_mac_usec(ah, 0xffff)) {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad slot time %u\n",
                    __func__, us);
                ahp->ah_slottime = (u_int) -1;  /* restore default handling */
                return AH_FALSE;
        } else {
                /* convert to system clocks */
                OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, ath_hal_mac_clks(ah, us));
                ahp->ah_slottime = us;
                return AH_TRUE;
        }
}

u_int
ar5212GetSlotTime(struct ath_hal *ah)
{
        u_int clks = OS_REG_READ(ah, AR_D_GBL_IFS_SLOT) & 0xffff;
        return ath_hal_mac_usec(ah, clks);      /* convert from system clocks */
}

HAL_BOOL
ar5212SetAckTimeout(struct ath_hal *ah, u_int us)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        if (us > ath_hal_mac_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad ack timeout %u\n",
                    __func__, us);
                ahp->ah_acktimeout = (u_int) -1; /* restore default handling */
                return AH_FALSE;
        } else {
                /* convert to system clocks */
                OS_REG_RMW_FIELD(ah, AR_TIME_OUT,
                        AR_TIME_OUT_ACK, ath_hal_mac_clks(ah, us));
                ahp->ah_acktimeout = us;
                return AH_TRUE;
        }
}

u_int
ar5212GetAckTimeout(struct ath_hal *ah)
{
        u_int clks = MS(OS_REG_READ(ah, AR_TIME_OUT), AR_TIME_OUT_ACK);
        return ath_hal_mac_usec(ah, clks);      /* convert from system clocks */
}

u_int
ar5212GetAckCTSRate(struct ath_hal *ah)
{
        return ((AH5212(ah)->ah_staId1Defaults & AR_STA_ID1_ACKCTS_6MB) == 0);
}

HAL_BOOL
ar5212SetAckCTSRate(struct ath_hal *ah, u_int high)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        if (high) {
                OS_REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_ACKCTS_6MB);
                ahp->ah_staId1Defaults &= ~AR_STA_ID1_ACKCTS_6MB;
        } else {
                OS_REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_ACKCTS_6MB);
                ahp->ah_staId1Defaults |= AR_STA_ID1_ACKCTS_6MB;
        }
        return AH_TRUE;
}

HAL_BOOL
ar5212SetCTSTimeout(struct ath_hal *ah, u_int us)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        if (us > ath_hal_mac_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: bad cts timeout %u\n",
                    __func__, us);
                ahp->ah_ctstimeout = (u_int) -1; /* restore default handling */
                return AH_FALSE;
        } else {
                /* convert to system clocks */
                OS_REG_RMW_FIELD(ah, AR_TIME_OUT,
                        AR_TIME_OUT_CTS, ath_hal_mac_clks(ah, us));
                ahp->ah_ctstimeout = us;
                return AH_TRUE;
        }
}

u_int
ar5212GetCTSTimeout(struct ath_hal *ah)
{
        u_int clks = MS(OS_REG_READ(ah, AR_TIME_OUT), AR_TIME_OUT_CTS);
        return ath_hal_mac_usec(ah, clks);      /* convert from system clocks */
}

/* Setup decompression for given key index */
HAL_BOOL
ar5212SetDecompMask(struct ath_hal *ah, uint16_t keyidx, int en)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        if (keyidx >= HAL_DECOMP_MASK_SIZE)
                return AH_FALSE;
        OS_REG_WRITE(ah, AR_DCM_A, keyidx);
        OS_REG_WRITE(ah, AR_DCM_D, en ? AR_DCM_D_EN : 0);
        ahp->ah_decompMask[keyidx] = en;

        return AH_TRUE;
}

/* Setup coverage class */
void
ar5212SetCoverageClass(struct ath_hal *ah, uint8_t coverageclass, int now)
{
        uint32_t slot, timeout, eifs;
        u_int clkRate;

        AH_PRIVATE(ah)->ah_coverageClass = coverageclass;

        if (now) {
                if (AH_PRIVATE(ah)->ah_coverageClass == 0)
                        return;

                /* Don't apply coverage class to non A channels */
                if (!IEEE80211_IS_CHAN_A(AH_PRIVATE(ah)->ah_curchan))
                        return;

                /* Get core clock rate */
                clkRate = ath_hal_mac_clks(ah, 1);

                /* Compute EIFS */
                slot = coverageclass * 3 * clkRate;
                eifs = coverageclass * 6 * clkRate;
                if (IEEE80211_IS_CHAN_HALF(AH_PRIVATE(ah)->ah_curchan)) {
                        slot += IFS_SLOT_HALF_RATE;
                        eifs += IFS_EIFS_HALF_RATE;
                } else if (IEEE80211_IS_CHAN_QUARTER(AH_PRIVATE(ah)->ah_curchan)) {
                        slot += IFS_SLOT_QUARTER_RATE;
                        eifs += IFS_EIFS_QUARTER_RATE;
                } else { /* full rate */
                        slot += IFS_SLOT_FULL_RATE;
                        eifs += IFS_EIFS_FULL_RATE;
                }

                /*
                 * Add additional time for air propagation for ACK and CTS
                 * timeouts. This value is in core clocks.
                 */
                timeout = ACK_CTS_TIMEOUT_11A + (coverageclass * 3 * clkRate);

                /*
                 * Write the values: slot, eifs, ack/cts timeouts.
                 */
                OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, slot);
                OS_REG_WRITE(ah, AR_D_GBL_IFS_EIFS, eifs);
                OS_REG_WRITE(ah, AR_TIME_OUT,
                          SM(timeout, AR_TIME_OUT_CTS)
                        | SM(timeout, AR_TIME_OUT_ACK));
        }
}

HAL_STATUS
ar5212SetQuiet(struct ath_hal *ah, uint32_t period, uint32_t duration,
    uint32_t nextStart, HAL_QUIET_FLAG flag)
{
        OS_REG_WRITE(ah, AR_QUIET2, period | (duration << AR_QUIET2_QUIET_DUR_S));
        if (flag & HAL_QUIET_ENABLE) {
                OS_REG_WRITE(ah, AR_QUIET1, nextStart | (1 << 16));
        }
        else {
                OS_REG_WRITE(ah, AR_QUIET1, nextStart);
        }
        return HAL_OK;
}

void
ar5212SetPCUConfig(struct ath_hal *ah)
{
        ar5212SetOperatingMode(ah, AH_PRIVATE(ah)->ah_opmode);
}

/*
 * Return whether an external 32KHz crystal should be used
 * to reduce power consumption when sleeping.  We do so if
 * the crystal is present (obtained from EEPROM) and if we
 * are not running as an AP and are configured to use it.
 */
HAL_BOOL
ar5212Use32KHzclock(struct ath_hal *ah, HAL_OPMODE opmode)
{
        if (opmode != HAL_M_HOSTAP) {
                struct ath_hal_5212 *ahp = AH5212(ah);
                return ath_hal_eepromGetFlag(ah, AR_EEP_32KHZCRYSTAL) &&
                       (ahp->ah_enable32kHzClock == USE_32KHZ ||
                        ahp->ah_enable32kHzClock == AUTO_32KHZ);
        } else
                return AH_FALSE;
}

/*
 * If 32KHz clock exists, use it to lower power consumption during sleep
 *
 * Note: If clock is set to 32 KHz, delays on accessing certain
 *       baseband registers (27-31, 124-127) are required.
 */
void
ar5212SetupClock(struct ath_hal *ah, HAL_OPMODE opmode)
{
        if (ar5212Use32KHzclock(ah, opmode)) {
                /*
                 * Enable clocks to be turned OFF in BB during sleep
                 * and also enable turning OFF 32MHz/40MHz Refclk
                 * from A2.
                 */
                OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
                OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
                    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 0x14 : 0x18);
                OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32, 1);
                OS_REG_WRITE(ah, AR_TSF_PARM, 61);  /* 32 KHz TSF incr */
                OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 1);

                if (IS_2413(ah) || IS_5413(ah) || IS_2417(ah)) {
                        OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x26);
                        OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0d);
                        OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x07);
                        OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0x3f);
                        /* # Set sleep clock rate to 32 KHz. */
                        OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x2);
                } else {
                        OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x0a);
                        OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0c);
                        OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x03);
                        OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0x20);
                        OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x3);
                }
        } else {
                OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0x0);
                OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 0);

                OS_REG_WRITE(ah, AR_TSF_PARM, 1);       /* 32MHz TSF inc */

                OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
                OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x7f);

                if (IS_2417(ah))
                        OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0a);
                else if (IS_HB63(ah))
                        OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x32);
                else
                        OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e);
                OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x0c);
                OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0xff);
                OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
                    IS_RAD5112_ANY(ah) || IS_5413(ah) || IS_2417(ah) ? 0x14 : 0x18);
                OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32,
                    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 39 : 31);
        }
}

/*
 * If 32KHz clock exists, turn it off and turn back on the 32Mhz
 */
void
ar5212RestoreClock(struct ath_hal *ah, HAL_OPMODE opmode)
{
        if (ar5212Use32KHzclock(ah, opmode)) {
                /* # Set sleep clock rate back to 32 MHz. */
                OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_RATE_IND, 0);
                OS_REG_RMW_FIELD(ah, AR_PCICFG, AR_PCICFG_SCLK_SEL, 0);

                OS_REG_WRITE(ah, AR_TSF_PARM, 1);       /* 32 MHz TSF incr */
                OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32,
                    IS_RAD5112_ANY(ah) || IS_5413(ah) ? 39 : 31);

                /*
                 * Restore BB registers to power-on defaults
                 */
                OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f);
                OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT,   0x7f);
                OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL,        0x0e);
                OS_REG_WRITE(ah, AR_PHY_M_SLEEP,           0x0c);
                OS_REG_WRITE(ah, AR_PHY_REFCLKDLY,         0xff);
                OS_REG_WRITE(ah, AR_PHY_REFCLKPD,
                    IS_RAD5112_ANY(ah) || IS_5413(ah) ?  0x14 : 0x18);
        }
}

/*
 * Adjust NF based on statistical values for 5GHz frequencies.
 * Default method: this may be overridden by the rf backend.
 */
int16_t
ar5212GetNfAdjust(struct ath_hal *ah, const HAL_CHANNEL_INTERNAL *c)
{
        static const struct {
                uint16_t freqLow;
                int16_t   adjust;
        } adjustDef[] = {
                { 5790, 11 },   /* NB: ordered high -> low */
                { 5730, 10 },
                { 5690,  9 },
                { 5660,  8 },
                { 5610,  7 },
                { 5530,  5 },
                { 5450,  4 },
                { 5379,  2 },
                { 5209,  0 },
                { 3000,  1 },
                {    0,  0 },
        };
        int i;

        for (i = 0; c->channel <= adjustDef[i].freqLow; i++)
                ;
        return adjustDef[i].adjust;
}

HAL_STATUS
ar5212GetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
        uint32_t capability, uint32_t *result)
{
#define MACVERSION(ah)  AH_PRIVATE(ah)->ah_macVersion
        struct ath_hal_5212 *ahp = AH5212(ah);
        const HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
        const struct ar5212AniState *ani;

        switch (type) {
        case HAL_CAP_CIPHER:            /* cipher handled in hardware */
                switch (capability) {
                case HAL_CIPHER_AES_CCM:
                        return pCap->halCipherAesCcmSupport ?
                                HAL_OK : HAL_ENOTSUPP;
                case HAL_CIPHER_AES_OCB:
                case HAL_CIPHER_TKIP:
                case HAL_CIPHER_WEP:
                case HAL_CIPHER_MIC:
                case HAL_CIPHER_CLR:
                        return HAL_OK;
                default:
                        return HAL_ENOTSUPP;
                }
        case HAL_CAP_TKIP_MIC:          /* handle TKIP MIC in hardware */
                switch (capability) {
                case 0:                 /* hardware capability */
                        return HAL_OK;
                case 1:
                        return (ahp->ah_staId1Defaults &
                            AR_STA_ID1_CRPT_MIC_ENABLE) ?  HAL_OK : HAL_ENXIO;
                }
                return HAL_EINVAL;
        case HAL_CAP_TKIP_SPLIT:        /* hardware TKIP uses split keys */
                switch (capability) {
                case 0:                 /* hardware capability */
                        return pCap->halTkipMicTxRxKeySupport ?
                                HAL_ENXIO : HAL_OK;
                case 1:                 /* current setting */
                        return (ahp->ah_miscMode &
                            AR_MISC_MODE_MIC_NEW_LOC_ENABLE) ? HAL_ENXIO : HAL_OK;
                }
                return HAL_EINVAL;
        case HAL_CAP_WME_TKIPMIC:       /* hardware can do TKIP MIC w/ WMM */
                /* XXX move to capability bit */
                return MACVERSION(ah) > AR_SREV_VERSION_VENICE ||
                    (MACVERSION(ah) == AR_SREV_VERSION_VENICE &&
                     AH_PRIVATE(ah)->ah_macRev >= 8) ? HAL_OK : HAL_ENOTSUPP;
        case HAL_CAP_DIVERSITY:         /* hardware supports fast diversity */
                switch (capability) {
                case 0:                 /* hardware capability */
                        return HAL_OK;
                case 1:                 /* current setting */
                        return ahp->ah_diversity ? HAL_OK : HAL_ENXIO;
                case HAL_CAP_STRONG_DIV:
                        *result = OS_REG_READ(ah, AR_PHY_RESTART);
                        *result = MS(*result, AR_PHY_RESTART_DIV_GC);
                        return HAL_OK;
                }
                return HAL_EINVAL;
        case HAL_CAP_DIAG:
                *result = AH_PRIVATE(ah)->ah_diagreg;
                return HAL_OK;
        case HAL_CAP_TPC:
                switch (capability) {
                case 0:                 /* hardware capability */
                        return HAL_OK;
                case 1:
                        return ahp->ah_tpcEnabled ? HAL_OK : HAL_ENXIO;
                }
                return HAL_OK;
        case HAL_CAP_PHYDIAG:           /* radar pulse detection capability */
                switch (capability) {
                case HAL_CAP_RADAR:
                        return ath_hal_eepromGetFlag(ah, AR_EEP_AMODE) ?
                            HAL_OK: HAL_ENXIO;
                case HAL_CAP_AR:
                        return (ath_hal_eepromGetFlag(ah, AR_EEP_GMODE) ||
                            ath_hal_eepromGetFlag(ah, AR_EEP_BMODE)) ?
                               HAL_OK: HAL_ENXIO;
                }
                return HAL_ENXIO;
        case HAL_CAP_MCAST_KEYSRCH:     /* multicast frame keycache search */
                switch (capability) {
                case 0:                 /* hardware capability */
                        return pCap->halMcastKeySrchSupport ? HAL_OK : HAL_ENXIO;
                case 1:
                        return (ahp->ah_staId1Defaults &
                            AR_STA_ID1_MCAST_KSRCH) ? HAL_OK : HAL_ENXIO;
                }
                return HAL_EINVAL;
        case HAL_CAP_TSF_ADJUST:        /* hardware has beacon tsf adjust */
                switch (capability) {
                case 0:                 /* hardware capability */
                        return pCap->halTsfAddSupport ? HAL_OK : HAL_ENOTSUPP;
                case 1:
                        return (ahp->ah_miscMode & AR_MISC_MODE_TX_ADD_TSF) ?
                                HAL_OK : HAL_ENXIO;
                }
                return HAL_EINVAL;
        case HAL_CAP_TPC_ACK:
                *result = MS(ahp->ah_macTPC, AR_TPC_ACK);
                return HAL_OK;
        case HAL_CAP_TPC_CTS:
                *result = MS(ahp->ah_macTPC, AR_TPC_CTS);
                return HAL_OK;
        case HAL_CAP_INTMIT:            /* interference mitigation */
                switch (capability) {
                case HAL_CAP_INTMIT_PRESENT:            /* hardware capability */
                        return HAL_OK;
                case HAL_CAP_INTMIT_ENABLE:
                        return (ahp->ah_procPhyErr & HAL_ANI_ENA) ?
                                HAL_OK : HAL_ENXIO;
                case HAL_CAP_INTMIT_NOISE_IMMUNITY_LEVEL:
                case HAL_CAP_INTMIT_OFDM_WEAK_SIGNAL_LEVEL:
                case HAL_CAP_INTMIT_CCK_WEAK_SIGNAL_THR:
                case HAL_CAP_INTMIT_FIRSTEP_LEVEL:
                case HAL_CAP_INTMIT_SPUR_IMMUNITY_LEVEL:
                        ani = ar5212AniGetCurrentState(ah);
                        if (ani == AH_NULL)
                                return HAL_ENXIO;
                        switch (capability) {
                        case 2: *result = ani->noiseImmunityLevel; break;
                        case 3: *result = !ani->ofdmWeakSigDetectOff; break;
                        case 4: *result = ani->cckWeakSigThreshold; break;
                        case 5: *result = ani->firstepLevel; break;
                        case 6: *result = ani->spurImmunityLevel; break;
                        }
                        return HAL_OK;
                }
                return HAL_EINVAL;
        default:
                return ath_hal_getcapability(ah, type, capability, result);
        }
#undef MACVERSION
}

HAL_BOOL
ar5212SetCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE type,
        uint32_t capability, uint32_t setting, HAL_STATUS *status)
{
#define N(a)    (sizeof(a)/sizeof(a[0]))
        struct ath_hal_5212 *ahp = AH5212(ah);
        const HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
        uint32_t v;

        switch (type) {
        case HAL_CAP_TKIP_MIC:          /* handle TKIP MIC in hardware */
                if (setting)
                        ahp->ah_staId1Defaults |= AR_STA_ID1_CRPT_MIC_ENABLE;
                else
                        ahp->ah_staId1Defaults &= ~AR_STA_ID1_CRPT_MIC_ENABLE;
                return AH_TRUE;
        case HAL_CAP_TKIP_SPLIT:        /* hardware TKIP uses split keys */
                if (!pCap->halTkipMicTxRxKeySupport)
                        return AH_FALSE;
                /* NB: true =>'s use split key cache layout */
                if (setting)
                        ahp->ah_miscMode &= ~AR_MISC_MODE_MIC_NEW_LOC_ENABLE;
                else
                        ahp->ah_miscMode |= AR_MISC_MODE_MIC_NEW_LOC_ENABLE;
                /* NB: write here so keys can be setup w/o a reset */
                OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE) | ahp->ah_miscMode);
                return AH_TRUE;
        case HAL_CAP_DIVERSITY:
                switch (capability) {
                case 0:
                        return AH_FALSE;
                case 1: /* setting */
                        if (ahp->ah_phyPowerOn) {
                                if (capability == HAL_CAP_STRONG_DIV) {
                                        v = OS_REG_READ(ah, AR_PHY_CCK_DETECT);
                                        if (setting)
                                                v |= AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
                                        else
                                                v &= ~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV;
                                        OS_REG_WRITE(ah, AR_PHY_CCK_DETECT, v);
                                }
                        }
                        ahp->ah_diversity = (setting != 0);
                        return AH_TRUE;

                case HAL_CAP_STRONG_DIV:
                        if (! ahp->ah_phyPowerOn)
                                return AH_FALSE;
                        v = OS_REG_READ(ah, AR_PHY_RESTART);
                        v &= ~AR_PHY_RESTART_DIV_GC;
                        v |= SM(setting, AR_PHY_RESTART_DIV_GC);
                        OS_REG_WRITE(ah, AR_PHY_RESTART, v);
                        return AH_TRUE;
                default:
                        return AH_FALSE;
                }
        case HAL_CAP_DIAG:              /* hardware diagnostic support */
                /*
                 * NB: could split this up into virtual capabilities,
                 *     (e.g. 1 => ACK, 2 => CTS, etc.) but it hardly
                 *     seems worth the additional complexity.
                 */
                AH_PRIVATE(ah)->ah_diagreg = setting;
                OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg);
                return AH_TRUE;
        case HAL_CAP_TPC:
                ahp->ah_tpcEnabled = (setting != 0);
                return AH_TRUE;
        case HAL_CAP_MCAST_KEYSRCH:     /* multicast frame keycache search */
                if (setting)
                        ahp->ah_staId1Defaults |= AR_STA_ID1_MCAST_KSRCH;
                else
                        ahp->ah_staId1Defaults &= ~AR_STA_ID1_MCAST_KSRCH;
                return AH_TRUE;
        case HAL_CAP_TPC_ACK:
        case HAL_CAP_TPC_CTS:
                setting += ahp->ah_txPowerIndexOffset;
                if (setting > 63)
                        setting = 63;
                if (type == HAL_CAP_TPC_ACK) {
                        ahp->ah_macTPC &= AR_TPC_ACK;
                        ahp->ah_macTPC |= MS(setting, AR_TPC_ACK);
                } else {
                        ahp->ah_macTPC &= AR_TPC_CTS;
                        ahp->ah_macTPC |= MS(setting, AR_TPC_CTS);
                }
                OS_REG_WRITE(ah, AR_TPC, ahp->ah_macTPC);
                return AH_TRUE;
        case HAL_CAP_INTMIT: {          /* interference mitigation */
                /* This maps the public ANI commands to the internal ANI commands */
                /* Private: HAL_ANI_CMD; Public: HAL_CAP_INTMIT_CMD */
                static const HAL_ANI_CMD cmds[] = {
                        HAL_ANI_PRESENT,
                        HAL_ANI_MODE,
                        HAL_ANI_NOISE_IMMUNITY_LEVEL,
                        HAL_ANI_OFDM_WEAK_SIGNAL_DETECTION,
                        HAL_ANI_CCK_WEAK_SIGNAL_THR,
                        HAL_ANI_FIRSTEP_LEVEL,
                        HAL_ANI_SPUR_IMMUNITY_LEVEL,
                };
                return capability < N(cmds) ?
                        AH5212(ah)->ah_aniControl(ah, cmds[capability], setting) :
                        AH_FALSE;
        }
        case HAL_CAP_TSF_ADJUST:        /* hardware has beacon tsf adjust */
                if (pCap->halTsfAddSupport) {
                        if (setting)
                                ahp->ah_miscMode |= AR_MISC_MODE_TX_ADD_TSF;
                        else
                                ahp->ah_miscMode &= ~AR_MISC_MODE_TX_ADD_TSF;
                        return AH_TRUE;
                }
                /* fall thru... */
        default:
                return ath_hal_setcapability(ah, type, capability,
                                setting, status);
        }
#undef N
}

HAL_BOOL
ar5212GetDiagState(struct ath_hal *ah, int request,
        const void *args, uint32_t argsize,
        void **result, uint32_t *resultsize)
{
        struct ath_hal_5212 *ahp = AH5212(ah);
        HAL_ANI_STATS *astats;

        (void) ahp;
        if (ath_hal_getdiagstate(ah, request, args, argsize, result, resultsize))
                return AH_TRUE;
        switch (request) {
        case HAL_DIAG_EEPROM:
        case HAL_DIAG_EEPROM_EXP_11A:
        case HAL_DIAG_EEPROM_EXP_11B:
        case HAL_DIAG_EEPROM_EXP_11G:
        case HAL_DIAG_RFGAIN:
                return ath_hal_eepromDiag(ah, request,
                    args, argsize, result, resultsize);
        case HAL_DIAG_RFGAIN_CURSTEP:
                *result = __DECONST(void *, ahp->ah_gainValues.currStep);
                *resultsize = (*result == AH_NULL) ?
                        0 : sizeof(GAIN_OPTIMIZATION_STEP);
                return AH_TRUE;
        case HAL_DIAG_PCDAC:
                *result = ahp->ah_pcdacTable;
                *resultsize = ahp->ah_pcdacTableSize;
                return AH_TRUE;
        case HAL_DIAG_TXRATES:
                *result = &ahp->ah_ratesArray[0];
                *resultsize = sizeof(ahp->ah_ratesArray);
                return AH_TRUE;
        case HAL_DIAG_ANI_CURRENT:
                *result = ar5212AniGetCurrentState(ah);
                *resultsize = (*result == AH_NULL) ?
                        0 : sizeof(struct ar5212AniState);
                return AH_TRUE;
        case HAL_DIAG_ANI_STATS:
                OS_MEMZERO(&ahp->ext_ani_stats, sizeof(ahp->ext_ani_stats));
                astats = ar5212AniGetCurrentStats(ah);
                if (astats == NULL) {
                        *result = NULL;
                        *resultsize = 0;
                } else {
                        OS_MEMCPY(&ahp->ext_ani_stats, astats, sizeof(HAL_ANI_STATS));
                        *result = &ahp->ext_ani_stats;
                        *resultsize = sizeof(ahp->ext_ani_stats);
                }
                return AH_TRUE;
        case HAL_DIAG_ANI_CMD:
                if (argsize != 2*sizeof(uint32_t))
                        return AH_FALSE;
                AH5212(ah)->ah_aniControl(ah, ((const uint32_t *)args)[0],
                        ((const uint32_t *)args)[1]);
                return AH_TRUE;
        case HAL_DIAG_ANI_PARAMS:
                /*
                 * NB: We assume struct ar5212AniParams is identical
                 * to HAL_ANI_PARAMS; if they diverge then we'll need
                 * to handle it here
                 */
                if (argsize == 0 && args == AH_NULL) {
                        struct ar5212AniState *aniState =
                            ar5212AniGetCurrentState(ah);
                        if (aniState == AH_NULL)
                                return AH_FALSE;
                        *result = __DECONST(void *, aniState->params);
                        *resultsize = sizeof(struct ar5212AniParams);
                        return AH_TRUE;
                } else {
                        if (argsize != sizeof(struct ar5212AniParams))
                                return AH_FALSE;
                        return ar5212AniSetParams(ah, args, args);
                }
                break;
        }
        return AH_FALSE;
}

/*
 * Check whether there's an in-progress NF completion.
 *
 * Returns AH_TRUE if there's a in-progress NF calibration, AH_FALSE
 * otherwise.
 */
HAL_BOOL
ar5212IsNFCalInProgress(struct ath_hal *ah)
{
        if (OS_REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF)
                return AH_TRUE;
        return AH_FALSE;
}

/*
 * Wait for an in-progress NF calibration to complete.
 *
 * The completion function waits "i" times 10uS.
 * It returns AH_TRUE if the NF calibration completed (or was never
 * in progress); AH_FALSE if it was still in progress after "i" checks.
 */
HAL_BOOL
ar5212WaitNFCalComplete(struct ath_hal *ah, int i)
{
        int j;
        if (i <= 0)
                i = 1;    /* it should run at least once */
        for (j = 0; j < i; j++) {
                if (! ar5212IsNFCalInProgress(ah))
                        return AH_TRUE;
                OS_DELAY(10);
        }
        return AH_FALSE;
}

void
ar5212EnableDfs(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
{
        uint32_t val;
        val = OS_REG_READ(ah, AR_PHY_RADAR_0);

        if (pe->pe_firpwr != HAL_PHYERR_PARAM_NOVAL) {
                val &= ~AR_PHY_RADAR_0_FIRPWR;
                val |= SM(pe->pe_firpwr, AR_PHY_RADAR_0_FIRPWR);
        }
        if (pe->pe_rrssi != HAL_PHYERR_PARAM_NOVAL) {
                val &= ~AR_PHY_RADAR_0_RRSSI;
                val |= SM(pe->pe_rrssi, AR_PHY_RADAR_0_RRSSI);
        }
        if (pe->pe_height != HAL_PHYERR_PARAM_NOVAL) {
                val &= ~AR_PHY_RADAR_0_HEIGHT;
                val |= SM(pe->pe_height, AR_PHY_RADAR_0_HEIGHT);
        }
        if (pe->pe_prssi != HAL_PHYERR_PARAM_NOVAL) {
                val &= ~AR_PHY_RADAR_0_PRSSI;
                val |= SM(pe->pe_prssi, AR_PHY_RADAR_0_PRSSI);
        }
        if (pe->pe_inband != HAL_PHYERR_PARAM_NOVAL) {
                val &= ~AR_PHY_RADAR_0_INBAND;
                val |= SM(pe->pe_inband, AR_PHY_RADAR_0_INBAND);
        }
        if (pe->pe_enabled)
                val |= AR_PHY_RADAR_0_ENA;
        else
                val &= ~ AR_PHY_RADAR_0_ENA;

        if (IS_5413(ah)) {
                if (pe->pe_blockradar == 1)
                        OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_BLOCKOFDMWEAK);
                else
                        OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_BLOCKOFDMWEAK);

                if (pe->pe_en_relstep_check == 1)
                        OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_ENRELSTEPCHK);
                else
                        OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_ENRELSTEPCHK);

                if (pe->pe_usefir128 == 1)
                        OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_USEFIR128);
                else
                        OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_USEFIR128);

                if (pe->pe_enmaxrssi == 1)
                        OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_ENMAXRSSI);
                else
                        OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_ENMAXRSSI);

                if (pe->pe_enrelpwr == 1)
                        OS_REG_SET_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_ENRELPWRCHK);
                else
                        OS_REG_CLR_BIT(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_ENRELPWRCHK);

                if (pe->pe_relpwr != HAL_PHYERR_PARAM_NOVAL)
                        OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_RELPWR, pe->pe_relpwr);

                if (pe->pe_relstep != HAL_PHYERR_PARAM_NOVAL)
                        OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_RELSTEP, pe->pe_relstep);

                if (pe->pe_maxlen != HAL_PHYERR_PARAM_NOVAL)
                        OS_REG_RMW_FIELD(ah, AR_PHY_RADAR_2,
                            AR_PHY_RADAR_2_MAXLEN, pe->pe_maxlen);
        }

        OS_REG_WRITE(ah, AR_PHY_RADAR_0, val);
}

/*
 * Parameters for the AR5212 PHY.
 */
#define AR5212_DFS_FIRPWR       -35
#define AR5212_DFS_RRSSI        20
#define AR5212_DFS_HEIGHT       14
#define AR5212_DFS_PRSSI        6
#define AR5212_DFS_INBAND       4

/*
 * Default parameters for the AR5413 PHY.
 */
#define AR5413_DFS_FIRPWR       -34
#define AR5413_DFS_RRSSI        20
#define AR5413_DFS_HEIGHT       10
#define AR5413_DFS_PRSSI        15
#define AR5413_DFS_INBAND       6
#define AR5413_DFS_RELPWR       8
#define AR5413_DFS_RELSTEP      31
#define AR5413_DFS_MAXLEN       255

HAL_BOOL
ar5212GetDfsDefaultThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
{

        if (IS_5413(ah)) {
                pe->pe_firpwr = AR5413_DFS_FIRPWR;
                pe->pe_rrssi = AR5413_DFS_RRSSI;
                pe->pe_height = AR5413_DFS_HEIGHT;
                pe->pe_prssi = AR5413_DFS_PRSSI;
                pe->pe_inband = AR5413_DFS_INBAND;
                pe->pe_relpwr = AR5413_DFS_RELPWR;
                pe->pe_relstep = AR5413_DFS_RELSTEP;
                pe->pe_maxlen = AR5413_DFS_MAXLEN;
                pe->pe_usefir128 = 0;
                pe->pe_blockradar = 1;
                pe->pe_enmaxrssi = 1;
                pe->pe_enrelpwr = 1;
                pe->pe_en_relstep_check = 0;
        } else {
                pe->pe_firpwr = AR5212_DFS_FIRPWR;
                pe->pe_rrssi = AR5212_DFS_RRSSI;
                pe->pe_height = AR5212_DFS_HEIGHT;
                pe->pe_prssi = AR5212_DFS_PRSSI;
                pe->pe_inband = AR5212_DFS_INBAND;
                pe->pe_relpwr = 0;
                pe->pe_relstep = 0;
                pe->pe_maxlen = 0;
                pe->pe_usefir128 = 0;
                pe->pe_blockradar = 0;
                pe->pe_enmaxrssi = 0;
                pe->pe_enrelpwr = 0;
                pe->pe_en_relstep_check = 0;
        }

        return (AH_TRUE);
}

void
ar5212GetDfsThresh(struct ath_hal *ah, HAL_PHYERR_PARAM *pe)
{
        uint32_t val,temp;

        val = OS_REG_READ(ah, AR_PHY_RADAR_0);

        temp = MS(val,AR_PHY_RADAR_0_FIRPWR);
        temp |= 0xFFFFFF80;
        pe->pe_firpwr = temp;
        pe->pe_rrssi = MS(val, AR_PHY_RADAR_0_RRSSI);
        pe->pe_height =  MS(val, AR_PHY_RADAR_0_HEIGHT);
        pe->pe_prssi = MS(val, AR_PHY_RADAR_0_PRSSI);
        pe->pe_inband = MS(val, AR_PHY_RADAR_0_INBAND);
        pe->pe_enabled = !! (val & AR_PHY_RADAR_0_ENA);

        pe->pe_relpwr = 0;
        pe->pe_relstep = 0;
        pe->pe_maxlen = 0;
        pe->pe_usefir128 = 0;
        pe->pe_blockradar = 0;
        pe->pe_enmaxrssi = 0;
        pe->pe_enrelpwr = 0;
        pe->pe_en_relstep_check = 0;
        pe->pe_extchannel = AH_FALSE;

        if (IS_5413(ah)) {
                val = OS_REG_READ(ah, AR_PHY_RADAR_2);
                pe->pe_relpwr = !! MS(val, AR_PHY_RADAR_2_RELPWR);
                pe->pe_relstep = !! MS(val, AR_PHY_RADAR_2_RELSTEP);
                pe->pe_maxlen = !! MS(val, AR_PHY_RADAR_2_MAXLEN);

                pe->pe_usefir128 = !! (val & AR_PHY_RADAR_2_USEFIR128);
                pe->pe_blockradar = !! (val & AR_PHY_RADAR_2_BLOCKOFDMWEAK);
                pe->pe_enmaxrssi = !! (val & AR_PHY_RADAR_2_ENMAXRSSI);
                pe->pe_enrelpwr = !! (val & AR_PHY_RADAR_2_ENRELPWRCHK);
                pe->pe_en_relstep_check =
                    !! (val & AR_PHY_RADAR_2_ENRELSTEPCHK);
        }
}

/*
 * Process the radar phy error and extract the pulse duration.
 */
HAL_BOOL
ar5212ProcessRadarEvent(struct ath_hal *ah, struct ath_rx_status *rxs,
    uint64_t fulltsf, const char *buf, HAL_DFS_EVENT *event)
{
        uint8_t dur;
        uint8_t rssi;

        /* Check whether the given phy error is a radar event */
        if ((rxs->rs_phyerr != HAL_PHYERR_RADAR) &&
            (rxs->rs_phyerr != HAL_PHYERR_FALSE_RADAR_EXT))
                return AH_FALSE;

        /*
         * The first byte is the pulse width - if there's
         * no data, simply set the duration to 0
         */
        if (rxs->rs_datalen >= 1)
                /* The pulse width is byte 0 of the data */
                dur = ((uint8_t) buf[0]) & 0xff;
        else
                dur = 0;

        /* Pulse RSSI is the normal reported RSSI */
        rssi = (uint8_t) rxs->rs_rssi;

        /* 0 duration/rssi is not a valid radar event */
        if (dur == 0 && rssi == 0)
                return AH_FALSE;

        HALDEBUG(ah, HAL_DEBUG_DFS, "%s: rssi=%d, dur=%d\n",
            __func__, rssi, dur);

        /* Record the event */
        event->re_full_ts = fulltsf;
        event->re_ts = rxs->rs_tstamp;
        event->re_rssi = rssi;
        event->re_dur = dur;
        event->re_flags = HAL_DFS_EVENT_PRICH;

        return AH_TRUE;
}

/*
 * Return whether 5GHz fast-clock (44MHz) is enabled.
 * It's always disabled for AR5212 series NICs.
 */
HAL_BOOL
ar5212IsFastClockEnabled(struct ath_hal *ah)
{
        return AH_FALSE;
}

/*
 * Return what percentage of the extension channel is busy.
 * This is always disabled for AR5212 series NICs.
 */
uint32_t
ar5212Get11nExtBusy(struct ath_hal *ah)
{
        return 0;
}

/*
 * Channel survey support.
 */
HAL_BOOL
ar5212GetMibCycleCounts(struct ath_hal *ah, HAL_SURVEY_SAMPLE *hsample)
{
        struct ath_hal_5212 *ahp = AH5212(ah);
        u_int32_t good = AH_TRUE;

        /* XXX freeze/unfreeze mib counters */
        uint32_t rc = OS_REG_READ(ah, AR_RCCNT);
        uint32_t rf = OS_REG_READ(ah, AR_RFCNT);
        uint32_t tf = OS_REG_READ(ah, AR_TFCNT);
        uint32_t cc = OS_REG_READ(ah, AR_CCCNT); /* read cycles last */

        if (ahp->ah_cycleCount == 0 || ahp->ah_cycleCount > cc) {
                /*
                 * Cycle counter wrap (or initial call); it's not possible
                 * to accurately calculate a value because the registers
                 * right shift rather than wrap--so punt and return 0.
                 */
                HALDEBUG(ah, HAL_DEBUG_ANY,
                    "%s: cycle counter wrap. ExtBusy = 0\n", __func__);
                good = AH_FALSE;
        } else {
                hsample->cycle_count = cc - ahp->ah_cycleCount;
                hsample->chan_busy = rc - ahp->ah_ctlBusy;
                hsample->ext_chan_busy = 0;
                hsample->rx_busy = rf - ahp->ah_rxBusy;
                hsample->tx_busy = tf - ahp->ah_txBusy;
        }

        /*
         * Keep a copy of the MIB results so the next sample has something
         * to work from.
         */
        ahp->ah_cycleCount = cc;
        ahp->ah_rxBusy = rf;
        ahp->ah_ctlBusy = rc;
        ahp->ah_txBusy = tf;

        return (good);
}

void
ar5212SetChainMasks(struct ath_hal *ah, uint32_t tx_chainmask,
    uint32_t rx_chainmask)
{
}

/*
 * Get the current NAV value from the hardware.
 *
 * 0xdeadbeef indicates the hardware is currently powered off.
 */
u_int
ar5212GetNav(struct ath_hal *ah)
{
        uint32_t reg;

        reg = OS_REG_READ(ah, AR_NAV);

        if (reg == 0xdeadbeef)
                return (0);
        return (reg);
}

/*
 * Set the current NAV value to the hardware.
 */
void
ar5212SetNav(struct ath_hal *ah, u_int val)
{

        OS_REG_WRITE(ah, AR_NAV, val);
}