root/sys/arm/broadcom/bcm2835/bcm2835_machdep.c
/*-
 * SPDX-License-Identifier: BSD-4-Clause
 *
 * Copyright (c) 2012 Oleksandr Tymoshenko.
 * Copyright (c) 1994-1998 Mark Brinicombe.
 * Copyright (c) 1994 Brini.
 * All rights reserved.
 *
 * This code is derived from software written for Brini by Mark Brinicombe
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Brini.
 * 4. The name of the company nor the name of the author may be used to
 *    endorse or promote products derived from this software without specific
 *    prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL BRINI OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from: FreeBSD: //depot/projects/arm/src/sys/arm/at91/kb920x_machdep.c, rev 45
 */

#include "opt_ddb.h"
#include "opt_platform.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/devmap.h>

#include <vm/vm.h>
#include <vm/pmap.h>

#include <machine/bus.h>
#include <machine/machdep.h>
#include <machine/platform.h>
#include <machine/platformvar.h>

#include <dev/ofw/openfirm.h>

#include <arm/broadcom/bcm2835/bcm2835_wdog.h>
#include <arm/broadcom/bcm2835/bcm2836_mp.h>

#include "platform_if.h"

#ifdef SOC_BCM2836
static platform_devmap_init_t bcm2836_devmap_init;
#endif
static platform_late_init_t bcm2835_late_init;
static platform_cpu_reset_t bcm2835_cpu_reset;

static void
bcm2835_late_init(platform_t plat)
{
        phandle_t system;
        pcell_t cells[2];
        int len;

        system = OF_finddevice("/system");
        if (system != -1) {
                len = OF_getencprop(system, "linux,serial", cells,
                    sizeof(cells));
                if (len > 0)
                        board_set_serial(((uint64_t)cells[0]) << 32 | cells[1]);

                len = OF_getencprop(system, "linux,revision", cells,
                    sizeof(cells));
                if (len > 0)
                        board_set_revision(cells[0]);
        }
}


#ifdef SOC_BCM2836
static int
bcm2836_devmap_init(platform_t plat)
{

        devmap_add_entry(0x3f000000, 0x01000000);
        return (0);
}
#endif

static void
bcm2835_cpu_reset(platform_t plat)
{
        bcmwd_watchdog_reset();
}


#if defined(SOC_BCM2836) || defined(SOC_BRCM_BCM2837)
static platform_method_t bcm2836_methods[] = {
        PLATFORMMETHOD(platform_devmap_init,    bcm2836_devmap_init),
        PLATFORMMETHOD(platform_late_init,      bcm2835_late_init),
        PLATFORMMETHOD(platform_cpu_reset,      bcm2835_cpu_reset),

#ifdef SMP
        PLATFORMMETHOD(platform_mp_start_ap,    bcm2836_mp_start_ap),
        PLATFORMMETHOD(platform_mp_setmaxid,    bcm2836_mp_setmaxid),
#endif

        PLATFORMMETHOD_END,
};
FDT_PLATFORM_DEF2(bcm2836, bcm2836_legacy, "bcm2836 (legacy)", 0, "brcm,bcm2709", 100);
FDT_PLATFORM_DEF2(bcm2836, bcm2836, "bcm2836", 0, "brcm,bcm2836", 100);
FDT_PLATFORM_DEF2(bcm2836, bcm2837, "bcm2837", 0, "brcm,bcm2837", 100);
#endif  /* defined(SOC_BCM2836) || defined(SOC_BRCM_BCM2837) */