/* SPDX-License-Identifier: BSD-3-Clause */ /* Copyright(c) 2007-2022 Intel Corporation */ /** ***************************************************************************** * @file dc_datapath.h * * @ingroup Dc_DataCompression * * @description * Definition of the Data Compression datapath parameters. * ******************* * **********************************************************/ #ifndef DC_DATAPATH_H_ #define DC_DATAPATH_H_ #define LAC_QAT_DC_REQ_SZ_LW 32 #define LAC_QAT_DC_RESP_SZ_LW 8 /* Restriction on the source buffer size for compression due to the firmware * processing */ #define DC_SRC_BUFFER_MIN_SIZE (15) /* Restriction on the destination buffer size for compression due to * the management of skid buffers in the firmware */ #define DC_DEST_BUFFER_DYN_MIN_SIZE (128) #define DC_DEST_BUFFER_STA_MIN_SIZE (64) #define DC_DEST_BUFFER_DYN_MIN_SIZE_GEN4 (512) #define DC_DEST_BUFFER_STA_MIN_SIZE_GEN4 (1024) /* C62x and C3xxx pcie rev0 devices require an additional 32bytes */ #define DC_DEST_BUFFER_STA_ADDITIONAL_SIZE (32) /* C4xxx device only requires 47 bytes */ #define DC_DEST_BUFFER_MIN_SIZE (47) /* Minimum destination buffer size for decompression */ #define DC_DEST_BUFFER_DEC_MIN_SIZE (1) /* Restriction on the source and destination buffer sizes for compression due * to the firmware taking 32 bits parameters. The max size is 2^32-1 */ #define DC_BUFFER_MAX_SIZE (0xFFFFFFFF) /* DC Source & Destination buffer type (FLAT/SGL) */ #define DC_DEFAULT_QAT_PTR_TYPE QAT_COMN_PTR_TYPE_SGL #define DC_DP_QAT_PTR_TYPE QAT_COMN_PTR_TYPE_FLAT /* Offset to first byte of Input Byte Counter (IBC) in state register */ #define DC_STATE_IBC_OFFSET (8) /* Size in bytes of input byte counter (IBC) in state register */ #define DC_IBC_SIZE_IN_BYTES (4) /* Offset to first byte to CRC32 in state register */ #define DC_STATE_CRC32_OFFSET (40) /* Offset to first byte to output CRC32 in state register */ #define DC_STATE_OUTPUT_CRC32_OFFSET (48) /* Offset to first byte to input CRC32 in state register */ #define DC_STATE_INPUT_CRC32_OFFSET (52) /* Offset to first byte of ADLER32 in state register */ #define DC_STATE_ADLER32_OFFSET (48) /* 8 bit mask value */ #define DC_8_BIT_MASK (0xff) /* 8 bit shift position */ #define DC_8_BIT_SHIFT_POS (8) /* Size in bytes of checksum */ #define DC_CHECKSUM_SIZE_IN_BYTES (4) /* Mask used to set the most significant bit to zero */ #define DC_STATE_REGISTER_ZERO_MSB_MASK (0x7F) /* Mask used to keep only the most significant bit and set the others to zero */ #define DC_STATE_REGISTER_KEEP_MSB_MASK (0x80) /* Compression state register word containing the parity bit */ #define DC_STATE_REGISTER_PARITY_BIT_WORD (5) /* Location of the parity bit within the compression state register word */ #define DC_STATE_REGISTER_PARITY_BIT (7) /* size which needs to be reserved before the results field to * align the results field with the API struct */ #define DC_API_ALIGNMENT_OFFSET (offsetof(CpaDcDpOpData, results)) /* Mask used to check the CompressAndVerify capability bit */ #define DC_CNV_EXTENDED_CAPABILITY (0x01) /* Mask used to check the CompressAndVerifyAndRecover capability bit */ #define DC_CNVNR_EXTENDED_CAPABILITY (0x100) /* Default values for CNV integrity checks, * those are used to inform hardware of specifying CRC parameters to be used * when calculating CRCs */ #define DC_CRC_POLY_DEFAULT 0x04c11db7 #define DC_CRC64_POLY_DEFAULT 0x42f0e1eba9ea3693ULL #define DC_XOR_FLAGS_DEFAULT 0xe0000 #define DC_XOR_OUT_DEFAULT 0xffffffff #define DC_XOR64_OUT_DEFAULT 0x0ULL #define DC_INVALID_CRC 0x0 /** ******************************************************************************* * @ingroup cpaDc Data Compression * Compression cookie * @description * This cookie stores information for a particular compression perform op. * This includes various user-supplied parameters for the operation which * will be needed in our callback function. * A pointer to this cookie is stored in the opaque data field of the QAT * message so that it can be accessed in the asynchronous callback. * @note * The order of the parameters within this structure is important. It needs * to match the order of the parameters in CpaDcDpOpData up to the * pSessionHandle. This allows the correct processing of the callback. *****************************************************************************/ typedef struct dc_compression_cookie_s { Cpa8U dcReqParamsBuffer[DC_API_ALIGNMENT_OFFSET]; /**< Memory block - was previously reserved for request parameters. * Now size maintained so following members align with API struct, * but no longer used for request parameters */ CpaDcRqResults reserved; /**< This is reserved for results to correctly align the structure * to match the one from the data plane API */ CpaInstanceHandle dcInstance; /**< Compression instance handle */ CpaDcSessionHandle pSessionHandle; /**< Pointer to the session handle */ icp_qat_fw_comp_req_t request; /**< Compression request */ void *callbackTag; /**< Opaque data supplied by the client */ dc_session_desc_t *pSessionDesc; /**< Pointer to the session descriptor */ CpaDcFlush flushFlag; /**< Flush flag */ CpaDcOpData *pDcOpData; /**< struct containing flags and CRC related data for this session */ CpaDcRqResults *pResults; /**< Pointer to result buffer holding consumed and produced data */ Cpa32U srcTotalDataLenInBytes; /**< Total length of the source data */ Cpa32U dstTotalDataLenInBytes; /**< Total length of the destination data */ dc_request_dir_t compDecomp; /**< Used to know whether the request is compression or decompression. * Useful when defining the session as combined */ CpaBufferList *pUserSrcBuff; /**< virtual userspace ptr to source SGL */ CpaBufferList *pUserDestBuff; /**< virtual userspace ptr to destination SGL */ CpaDcCallbackFn pCbFunc; /**< Callback function defined for the traditional sessionless API */ CpaDcChecksum checksumType; /**< Type of checksum */ dc_integrity_crc_fw_t dataIntegrityCrcs; /**< Data integrity table */ } dc_compression_cookie_t; /** ***************************************************************************** * @ingroup Dc_DataCompression * Callback function called for compression and decompression requests in * asynchronous mode * * @description * Called to process compression and decompression response messages. This * callback will check for errors, update the statistics and will call the * user callback * * @param[in] pRespMsg Response message * *****************************************************************************/ void dcCompression_ProcessCallback(void *pRespMsg); CpaStatus dcCheckOpData(sal_compression_service_t *pService, CpaDcOpData *pOpData); /** ***************************************************************************** * @ingroup Dc_DataCompression * Describes CNV and CNVNR modes * * @description * This enum is used to indicate the CNV modes. * *****************************************************************************/ typedef enum dc_cnv_mode_s { DC_NO_CNV = 0, /* CNV = FALSE, CNVNR = FALSE */ DC_CNV, /* CNV = TRUE, CNVNR = FALSE */ DC_CNVNR, /* CNV = TRUE, CNVNR = TRUE */ } dc_cnv_mode_t; /* Type to access extended features bit fields */ typedef struct dc_extended_features_s { unsigned is_cnv : 1; /* Bit<0> */ unsigned padding : 7; unsigned is_cnvnr : 1; /* Bit<8> */ unsigned reserved : 2; unsigned is_part_read : 1; /* Bit<11> */ unsigned is_zero_pad : 1; /* Bit<12> */ unsigned not_used : 19; } dc_extd_ftrs_t; #endif /* DC_DATAPATH_H_ */
