/*-
 * SPDX-License-Identifier: BSD-2-Clause
 *
 * Copyright (c) Andriy Gapon
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

#include <sys/cdefs.h>
#include "opt_platform.h"

#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/sysctl.h>
#include <sys/systm.h>

#include <machine/bus.h>

#include <dev/iicbus/iicbus.h>
#include <dev/iicbus/iiconf.h>

#ifdef FDT
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#endif

/*
 * Driver for PCF8591 I2C 8-bit ADC and DAC.
 */
#define CTRL_CH_SELECT_MASK                     0x03
#define CTRL_AUTOINC_EN                         0x04
#define CTRL_CH_CONFIG_MASK                     0x30
#define         CTRL_CH_CONFIG_4_SINGLE         0x00
#define         CTRL_CH_CONFIG_3_DIFF           0x10
#define         CTRL_CH_CONFIG_2_SINGLE_1_DIFF  0x20
#define         CTRL_CH_CONFIG_2_DIFF           0x30
#define CTRL_OUTPUT_EN                          0x40

struct pcf8591_softc {
        device_t                sc_dev;
        int                     sc_ch_count;
        uint8_t                 sc_addr;
        uint8_t                 sc_cfg;
        uint8_t                 sc_output;
};

#ifdef FDT
static struct ofw_compat_data compat_data[] = {
        { "nxp,pcf8591",        true },
        { NULL,                 false }
};
#endif

static int
pcf8591_set_config(device_t dev)
{

        struct iic_msg msg;
        uint8_t data[2];
        struct pcf8591_softc *sc;
        int error;

        sc = device_get_softc(dev);
        data[0] = sc->sc_cfg;
        data[1] = sc->sc_output;
        msg.slave = sc->sc_addr;
        msg.flags = IIC_M_WR;
        msg.len = nitems(data);
        msg.buf = data;

        error = iicbus_transfer_excl(dev, &msg, 1, IIC_INTRWAIT);
        return (error);
}

static int
pcf8591_get_reading(device_t dev, uint8_t *reading)
{
        struct iic_msg msg;
        struct pcf8591_softc *sc;
        int error;

        sc = device_get_softc(dev);

        msg.slave = sc->sc_addr;
        msg.flags = IIC_M_RD;
        msg.len = 1;
        msg.buf = reading;

        error = iicbus_transfer_excl(dev, &msg, 1, IIC_INTRWAIT);
        return (error);
}

static int
pcf8591_select_channel(device_t dev, int channel)
{
        struct pcf8591_softc *sc;
        int error;
        uint8_t unused;

        sc = device_get_softc(dev);
        if (channel >= sc->sc_ch_count)
                return (EINVAL);
        sc->sc_cfg &= ~CTRL_CH_SELECT_MASK;
        sc->sc_cfg += channel;
        error = pcf8591_set_config(dev);
        if (error != 0)
                return (error);

        /*
         * The next read is still for the old channel,
         * so do it and discard.
         */
        error = pcf8591_get_reading(dev, &unused);
        return (error);
}

static int
pcf8591_channel_sysctl(SYSCTL_HANDLER_ARGS)
{
        device_t dev;
        int error, channel, val;
        uint8_t reading;

        dev = arg1;
        channel = arg2;

        if (req->oldptr != NULL) {
                error = pcf8591_select_channel(dev, channel);
                if (error != 0)
                        return (EIO);
                error = pcf8591_get_reading(dev, &reading);
                if (error != 0)
                        return (EIO);
                val = reading;
        }
        error = sysctl_handle_int(oidp, &val, 0, req);
        return (error);
}

static void
pcf8591_start(void *arg)
{
        device_t dev;
        struct pcf8591_softc *sc;
        struct sysctl_ctx_list *ctx;
        struct sysctl_oid *tree_node;
        struct sysctl_oid_list *tree;
        struct sysctl_oid *inputs_node;
        struct sysctl_oid_list *inputs;

        sc = arg;
        dev = sc->sc_dev;

        /*
         * Set initial -- and, for the time being, fixed -- configuration.
         * Channel auto-incrementi is disabled, although it could be more
         * performant and precise for bulk channel queries.
         * The inputs are configured as four single channels.
         * The output is disabled.
         */
        sc->sc_cfg = 0;
        sc->sc_output = 0;
        sc->sc_ch_count = 4;
        (void)pcf8591_set_config(dev);

        ctx = device_get_sysctl_ctx(dev);
        tree_node = device_get_sysctl_tree(dev);
        tree = SYSCTL_CHILDREN(tree_node);

        inputs_node = SYSCTL_ADD_NODE(ctx, tree, OID_AUTO, "inputs",
            CTLTYPE_NODE, NULL, "Input channels");
        inputs = SYSCTL_CHILDREN(inputs_node);
        for (int i = 0; i < sc->sc_ch_count; i++) {
                char buf[4];

                snprintf(buf, sizeof(buf), "%d", i);
                SYSCTL_ADD_PROC(ctx, inputs, OID_AUTO, buf,
                    CTLTYPE_INT | CTLFLAG_RD, dev, i,
                    pcf8591_channel_sysctl, "I", "Input level from 0 to 255 "
                    "(relative to Vref)");
        }
}

static int
pcf8591_probe(device_t dev)
{
#ifdef FDT
        if (!ofw_bus_status_okay(dev))
                return (ENXIO);
#endif
        device_set_desc(dev, "PCF8591 8-bit ADC / DAC");
#ifdef FDT
        if (ofw_bus_search_compatible(dev, compat_data)->ocd_data)
                return (BUS_PROBE_GENERIC);
#endif
        return (BUS_PROBE_NOWILDCARD);
}

static int
pcf8591_attach(device_t dev)
{
        struct pcf8591_softc *sc;

        sc = device_get_softc(dev);
        sc->sc_dev = dev;
        sc->sc_addr = iicbus_get_addr(dev);

        /*
         * We have to wait until interrupts are enabled.  Usually I2C read
         * and write only works when the interrupts are available.
         */
        config_intrhook_oneshot(pcf8591_start, sc);
        return (0);
}

static int
pcf8591_detach(device_t dev)
{
        return (0);
}

static device_method_t  pcf8591_methods[] = {
        /* Device interface */
        DEVMETHOD(device_probe,         pcf8591_probe),
        DEVMETHOD(device_attach,        pcf8591_attach),
        DEVMETHOD(device_detach,        pcf8591_detach),

        DEVMETHOD_END
};

static driver_t pcf8591_driver = {
        "pcf8591",
        pcf8591_methods,
        sizeof(struct pcf8591_softc)
};

DRIVER_MODULE(pcf8591, iicbus, pcf8591_driver, 0, 0);
MODULE_DEPEND(pcf8591, iicbus, IICBUS_MINVER, IICBUS_PREFVER, IICBUS_MAXVER);
MODULE_VERSION(pcf8591, 1);
#ifdef FDT
IICBUS_FDT_PNP_INFO(compat_data);
#endif