/*-
 * SPDX-License-Identifier: ISC
 *
 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
 * Copyright (c) 2002-2008 Atheros Communications, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */
#include "opt_ah.h"

#include "ah.h"
#include "ah_internal.h"
#include "ah_devid.h"

#include "ah_eeprom_v14.h"

#include "ar5416/ar5416.h"
#include "ar5416/ar5416reg.h"
#include "ar5416/ar5416phy.h"

/* Eeprom versioning macros. Returns true if the version is equal or newer than the ver specified */ 
#define EEP_MINOR(_ah) \
        (AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK)
#define IS_EEP_MINOR_V2(_ah)    (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_2)
#define IS_EEP_MINOR_V3(_ah)    (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_3)

/* Additional Time delay to wait after activiting the Base band */
#define BASE_ACTIVATE_DELAY     100     /* 100 usec */
#define PLL_SETTLE_DELAY        300     /* 300 usec */
#define RTC_PLL_SETTLE_DELAY    1000    /* 1 ms     */

static void ar5416InitDMA(struct ath_hal *ah);
static void ar5416InitBB(struct ath_hal *ah, const struct ieee80211_channel *);
static void ar5416InitIMR(struct ath_hal *ah, HAL_OPMODE opmode);
static void ar5416InitQoS(struct ath_hal *ah);
static void ar5416InitUserSettings(struct ath_hal *ah);
static void ar5416OverrideIni(struct ath_hal *ah, const struct ieee80211_channel *);

#if 0
static HAL_BOOL ar5416ChannelChange(struct ath_hal *, const struct ieee80211_channel *);
#endif
static void ar5416SetDeltaSlope(struct ath_hal *, const struct ieee80211_channel *);

static HAL_BOOL ar5416SetResetPowerOn(struct ath_hal *ah);
static HAL_BOOL ar5416SetReset(struct ath_hal *ah, int type);
static HAL_BOOL ar5416SetPowerPerRateTable(struct ath_hal *ah,
        struct ar5416eeprom *pEepData, 
        const struct ieee80211_channel *chan, int16_t *ratesArray,
        uint16_t cfgCtl, uint16_t AntennaReduction,
        uint16_t twiceMaxRegulatoryPower, 
        uint16_t powerLimit);
static void ar5416Set11nRegs(struct ath_hal *ah, const struct ieee80211_channel *chan);
static void ar5416MarkPhyInactive(struct ath_hal *ah);
static void ar5416SetIFSTiming(struct ath_hal *ah,
   const struct ieee80211_channel *chan);

/*
 * Places the device in and out of reset and then places sane
 * values in the registers based on EEPROM config, initialization
 * vectors (as determined by the mode), and station configuration
 *
 * bChannelChange is used to preserve DMA/PCU registers across
 * a HW Reset during channel change.
 */
HAL_BOOL
ar5416Reset(struct ath_hal *ah, HAL_OPMODE opmode,
        struct ieee80211_channel *chan,
        HAL_BOOL bChannelChange,
        HAL_RESET_TYPE resetType,
        HAL_STATUS *status)
{
#define N(a)    (sizeof (a) / sizeof (a[0]))
#define FAIL(_code)     do { ecode = _code; goto bad; } while (0)
        struct ath_hal_5212 *ahp = AH5212(ah);
        HAL_CHANNEL_INTERNAL *ichan;
        uint32_t saveDefAntenna, saveLedState;
        uint32_t macStaId1;
        uint16_t rfXpdGain[2];
        HAL_STATUS ecode;
        uint32_t powerVal, rssiThrReg;
        uint32_t ackTpcPow, ctsTpcPow, chirpTpcPow;
        int i;
        uint64_t tsf = 0;

        OS_MARK(ah, AH_MARK_RESET, bChannelChange);

        /* Bring out of sleep mode */
        if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip did not wakeup\n",
                    __func__);
                FAIL(HAL_EIO);
        }

        /*
         * Map public channel to private.
         */
        ichan = ath_hal_checkchannel(ah, chan);
        if (ichan == AH_NULL)
                FAIL(HAL_EINVAL);
        switch (opmode) {
        case HAL_M_STA:
        case HAL_M_IBSS:
        case HAL_M_HOSTAP:
        case HAL_M_MONITOR:
                break;
        default:
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid operating mode %u\n",
                    __func__, opmode);
                FAIL(HAL_EINVAL);
                break;
        }
        HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1);

        /* Blank the channel survey statistics */
        ath_hal_survey_clear(ah);

        /* XXX Turn on fast channel change for 5416 */

        /*
         * Preserve the bmiss rssi threshold and count threshold
         * across resets
         */
        rssiThrReg = OS_REG_READ(ah, AR_RSSI_THR);
        /* If reg is zero, first time thru set to default val */
        if (rssiThrReg == 0)
                rssiThrReg = INIT_RSSI_THR;

        /*
         * Preserve the antenna on a channel change
         */
        saveDefAntenna = OS_REG_READ(ah, AR_DEF_ANTENNA);

        /*
         * Don't do this for the AR9285 - it breaks RX for single
         * antenna designs when diversity is disabled.
         *
         * I'm not sure what this was working around; it may be
         * something to do with the AR5416.  Certainly this register
         * isn't supposed to be used by the MIMO chips for anything
         * except for defining the default antenna when an external
         * phase array / smart antenna is connected.
         *
         * See PR: kern/179269 .
         */
        if ((! AR_SREV_KITE(ah)) && saveDefAntenna == 0)        /* XXX magic constants */
                saveDefAntenna = 1;

        /* Save hardware flag before chip reset clears the register */
        macStaId1 = OS_REG_READ(ah, AR_STA_ID1) & 
                (AR_STA_ID1_BASE_RATE_11B | AR_STA_ID1_USE_DEFANT);

        /* Save led state from pci config register */
        saveLedState = OS_REG_READ(ah, AR_MAC_LED) &
                (AR_MAC_LED_ASSOC | AR_MAC_LED_MODE |
                 AR_MAC_LED_BLINK_THRESH_SEL | AR_MAC_LED_BLINK_SLOW);

        /* For chips on which the RTC reset is done, save TSF before it gets cleared */
        if (AR_SREV_HOWL(ah) ||
            (AR_SREV_MERLIN(ah) &&
             ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) ||
            (resetType == HAL_RESET_FORCE_COLD) ||
            (resetType == HAL_RESET_BBPANIC) ||
            (ah->ah_config.ah_force_full_reset))
                tsf = ar5416GetTsf64(ah);

        /* Mark PHY as inactive; marked active in ar5416InitBB() */
        ar5416MarkPhyInactive(ah);

        if (!ar5416ChipReset(ah, chan, resetType)) {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
                FAIL(HAL_EIO);
        }

        /* Restore TSF */
        if (tsf)
                ar5416SetTsf64(ah, tsf);

        OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__);
        if (AR_SREV_MERLIN_10_OR_LATER(ah))
                OS_REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);

        AH5416(ah)->ah_writeIni(ah, chan);

        if(AR_SREV_KIWI_13_OR_LATER(ah) ) {
                /* Enable ASYNC FIFO */
                OS_REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
                    AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL);
                OS_REG_SET_BIT(ah, AR_PHY_MODE, AR_PHY_MODE_ASYNCFIFO);
                OS_REG_CLR_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
                    AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
                OS_REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
                    AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
        }

        /* Override ini values (that can be overridden in this fashion) */
        ar5416OverrideIni(ah, chan);

        /* Setup 11n MAC/Phy mode registers */
        ar5416Set11nRegs(ah, chan);

        OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__);

        /*
         * Some AR91xx SoC devices frequently fail to accept TSF writes
         * right after the chip reset. When that happens, write a new
         * value after the initvals have been applied, with an offset
         * based on measured time difference
         */
        if (AR_SREV_HOWL(ah) && (ar5416GetTsf64(ah) < tsf)) {
                tsf += 1500;
                ar5416SetTsf64(ah, tsf);
        }

        HALDEBUG(ah, HAL_DEBUG_RESET, ">>>2 %s: AR_PHY_DAG_CTRLCCK=0x%x\n",
                __func__, OS_REG_READ(ah,AR_PHY_DAG_CTRLCCK));
        HALDEBUG(ah, HAL_DEBUG_RESET, ">>>2 %s: AR_PHY_ADC_CTL=0x%x\n",
                __func__, OS_REG_READ(ah,AR_PHY_ADC_CTL));      

        /*
         * This routine swaps the analog chains - it should be done
         * before any radio register twiddling is done.
         */
        ar5416InitChainMasks(ah);

        /* Setup the open-loop power calibration if required */
        if (ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) {
                AH5416(ah)->ah_olcInit(ah);
                AH5416(ah)->ah_olcTempCompensation(ah);
        }

        /* Setup the transmit power values. */
        if (!ah->ah_setTxPower(ah, chan, rfXpdGain)) {
                HALDEBUG(ah, HAL_DEBUG_ANY,
                    "%s: error init'ing transmit power\n", __func__);
                FAIL(HAL_EIO);
        }

        /* Write the analog registers */
        if (!ahp->ah_rfHal->setRfRegs(ah, chan,
            IEEE80211_IS_CHAN_2GHZ(chan) ? 2: 1, rfXpdGain)) {
                HALDEBUG(ah, HAL_DEBUG_ANY,
                    "%s: ar5212SetRfRegs failed\n", __func__);
                FAIL(HAL_EIO);
        }

        /* Write delta slope for OFDM enabled modes (A, G, Turbo) */
        if (IEEE80211_IS_CHAN_OFDM(chan)|| IEEE80211_IS_CHAN_HT(chan))
                ar5416SetDeltaSlope(ah, chan);

        AH5416(ah)->ah_spurMitigate(ah, chan);

        /* Setup board specific options for EEPROM version 3 */
        if (!ah->ah_setBoardValues(ah, chan)) {
                HALDEBUG(ah, HAL_DEBUG_ANY,
                    "%s: error setting board options\n", __func__);
                FAIL(HAL_EIO);
        }

        OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__);

        OS_REG_WRITE(ah, AR_STA_ID0, LE_READ_4(ahp->ah_macaddr));
        OS_REG_WRITE(ah, AR_STA_ID1, LE_READ_2(ahp->ah_macaddr + 4)
                | macStaId1
                | AR_STA_ID1_RTS_USE_DEF
                | ahp->ah_staId1Defaults
        );
        ar5212SetOperatingMode(ah, opmode);

        /* Set Venice BSSID mask according to current state */
        OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask));
        OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4));

        /* Restore previous led state */
        if (AR_SREV_HOWL(ah))
                OS_REG_WRITE(ah, AR_MAC_LED,
                    AR_MAC_LED_ASSOC_ACTIVE | AR_CFG_SCLK_32KHZ);
        else
                OS_REG_WRITE(ah, AR_MAC_LED, OS_REG_READ(ah, AR_MAC_LED) |
                    saveLedState);

        /* Start TSF2 for generic timer 8-15 */
#ifdef  NOTYET
        if (AR_SREV_KIWI(ah))
                ar5416StartTsf2(ah);
#endif

        /*
         * Enable Bluetooth Coexistence if it's enabled.
         */
        if (AH5416(ah)->ah_btCoexConfigType != HAL_BT_COEX_CFG_NONE)
                ar5416InitBTCoex(ah);

        /* Restore previous antenna */
        OS_REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna);

        /* then our BSSID and associate id */
        OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid));
        OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid + 4) |
            (ahp->ah_assocId & 0x3fff) << AR_BSS_ID1_AID_S);

        /* Restore bmiss rssi & count thresholds */
        OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr);

        OS_REG_WRITE(ah, AR_ISR, ~0);           /* cleared on write */

        /* Restore bmiss rssi & count thresholds */
        OS_REG_WRITE(ah, AR_RSSI_THR, rssiThrReg);

        if (!ar5212SetChannel(ah, chan))
                FAIL(HAL_EIO);

        OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__);

        /* Set 1:1 QCU to DCU mapping for all queues */
        for (i = 0; i < AR_NUM_DCU; i++)
                OS_REG_WRITE(ah, AR_DQCUMASK(i), 1 << i);

        ahp->ah_intrTxqs = 0;
        for (i = 0; i < AH_PRIVATE(ah)->ah_caps.halTotalQueues; i++)
                ah->ah_resetTxQueue(ah, i);

        ar5416InitIMR(ah, opmode);
        ar5416SetCoverageClass(ah, AH_PRIVATE(ah)->ah_coverageClass, 1);
        ar5416InitQoS(ah);
        /* This may override the AR_DIAG_SW register */
        ar5416InitUserSettings(ah);

        /* XXX this won't work for AR9287! */
        if (IEEE80211_IS_CHAN_HALF(chan) || IEEE80211_IS_CHAN_QUARTER(chan)) {
                ar5416SetIFSTiming(ah, chan);
#if 0
                        /*
                         * AR5413?
                         * Force window_length for 1/2 and 1/4 rate channels,
                         * the ini file sets this to zero otherwise.
                         */
                        OS_REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL,
                            AR_PHY_FRAME_CTL_WINLEN, 3);
                }
#endif
        }

        if (AR_SREV_KIWI_13_OR_LATER(ah)) {
                /*
                 * Enable ASYNC FIFO
                 *
                 * If Async FIFO is enabled, the following counters change
                 * as MAC now runs at 117 Mhz instead of 88/44MHz when
                 * async FIFO is disabled.
                 *
                 * Overwrite the delay/timeouts initialized in ProcessIni()
                 * above.
                 */
                OS_REG_WRITE(ah, AR_D_GBL_IFS_SIFS,
                    AR_D_GBL_IFS_SIFS_ASYNC_FIFO_DUR);
                OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT,
                    AR_D_GBL_IFS_SLOT_ASYNC_FIFO_DUR);
                OS_REG_WRITE(ah, AR_D_GBL_IFS_EIFS,
                    AR_D_GBL_IFS_EIFS_ASYNC_FIFO_DUR);

                OS_REG_WRITE(ah, AR_TIME_OUT,
                    AR_TIME_OUT_ACK_CTS_ASYNC_FIFO_DUR);
                OS_REG_WRITE(ah, AR_USEC, AR_USEC_ASYNC_FIFO_DUR);

                OS_REG_SET_BIT(ah, AR_MAC_PCU_LOGIC_ANALYZER,
                    AR_MAC_PCU_LOGIC_ANALYZER_DISBUG20768);
                OS_REG_RMW_FIELD(ah, AR_AHB_MODE, AR_AHB_CUSTOM_BURST_EN,
                    AR_AHB_CUSTOM_BURST_ASYNC_FIFO_VAL);
        }

        if (AR_SREV_KIWI_13_OR_LATER(ah)) {
                /* Enable AGGWEP to accelerate encryption engine */
                OS_REG_SET_BIT(ah, AR_PCU_MISC_MODE2,
                    AR_PCU_MISC_MODE2_ENABLE_AGGWEP);
        }

        /*
         * disable seq number generation in hw
         */
         OS_REG_WRITE(ah, AR_STA_ID1,
             OS_REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PRESERVE_SEQNUM);
         
        ar5416InitDMA(ah);

        /*
         * program OBS bus to see MAC interrupts
         */
        OS_REG_WRITE(ah, AR_OBS, 8);

        /*
         * Disable the "general" TX/RX mitigation timers.
         */
        OS_REG_WRITE(ah, AR_MIRT, 0);

#ifdef  AH_AR5416_INTERRUPT_MITIGATION
        /*
         * This initialises the RX interrupt mitigation timers.
         *
         * The mitigation timers begin at idle and are triggered
         * upon the RXOK of a single frame (or sub-frame, for A-MPDU.)
         * Then, the RX mitigation interrupt will fire:
         *
         * + 250uS after the last RX'ed frame, or
         * + 700uS after the first RX'ed frame
         *
         * Thus, the LAST field dictates the extra latency
         * induced by the RX mitigation method and the FIRST
         * field dictates how long to delay before firing an
         * RX mitigation interrupt.
         *
         * Please note this only seems to be for RXOK frames;
         * not CRC or PHY error frames.
         *
         */
        OS_REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_LAST, 250);
        OS_REG_RMW_FIELD(ah, AR_RIMT, AR_RIMT_FIRST, 700);
#endif
        ar5416InitBB(ah, chan);

        /* Setup compression registers */
        ar5212SetCompRegs(ah);          /* XXX not needed? */

        /*
         * 5416 baseband will check the per rate power table
         * and select the lower of the two
         */
        ackTpcPow = 63;
        ctsTpcPow = 63;
        chirpTpcPow = 63;
        powerVal = SM(ackTpcPow, AR_TPC_ACK) |
                SM(ctsTpcPow, AR_TPC_CTS) |
                SM(chirpTpcPow, AR_TPC_CHIRP);
        OS_REG_WRITE(ah, AR_TPC, powerVal);

        if (!ar5416InitCal(ah, chan))
                FAIL(HAL_ESELFTEST);

        ar5416RestoreChainMask(ah);

        AH_PRIVATE(ah)->ah_opmode = opmode;     /* record operating mode */

        if (bChannelChange && !IEEE80211_IS_CHAN_DFS(chan)) 
                chan->ic_state &= ~IEEE80211_CHANSTATE_CWINT;

        if (AR_SREV_HOWL(ah)) {
                /*
                 * Enable the MBSSID block-ack fix for HOWL.
                 * This feature is only supported on Howl 1.4, but it is safe to
                 * set bit 22 of STA_ID1 on other Howl revisions (1.1, 1.2, 1.3),
                 * since bit 22 is unused in those Howl revisions.
                 */
                unsigned int reg;
                reg = (OS_REG_READ(ah, AR_STA_ID1) | (1<<22));
                OS_REG_WRITE(ah,AR_STA_ID1, reg);
                ath_hal_printf(ah, "MBSSID Set bit 22 of AR_STA_ID 0x%x\n", reg);
        }

        HALDEBUG(ah, HAL_DEBUG_RESET, "%s: done\n", __func__);

        OS_MARK(ah, AH_MARK_RESET_DONE, 0);

        return AH_TRUE;
bad:
        OS_MARK(ah, AH_MARK_RESET_DONE, ecode);
        if (status != AH_NULL)
                *status = ecode;
        return AH_FALSE;
#undef FAIL
#undef N
}

#if 0
/*
 * This channel change evaluates whether the selected hardware can
 * perform a synthesizer-only channel change (no reset).  If the
 * TX is not stopped, or the RFBus cannot be granted in the given
 * time, the function returns false as a reset is necessary
 */
HAL_BOOL
ar5416ChannelChange(struct ath_hal *ah, const structu ieee80211_channel *chan)
{
        uint32_t       ulCount;
        uint32_t   data, synthDelay, qnum;
        uint16_t   rfXpdGain[4];
        struct ath_hal_5212 *ahp = AH5212(ah);
        HAL_CHANNEL_INTERNAL *ichan;

        /*
         * Map public channel to private.
         */
        ichan = ath_hal_checkchannel(ah, chan);

        /* TX must be stopped or RF Bus grant will not work */
        for (qnum = 0; qnum < AH_PRIVATE(ah)->ah_caps.halTotalQueues; qnum++) {
                if (ar5212NumTxPending(ah, qnum)) {
                        HALDEBUG(ah, HAL_DEBUG_ANY,
                            "%s: frames pending on queue %d\n", __func__, qnum);
                        return AH_FALSE;
                }
        }

        /*
         * Kill last Baseband Rx Frame - Request analog bus grant
         */
        OS_REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_REQUEST);
        if (!ath_hal_wait(ah, AR_PHY_RFBUS_GNT, AR_PHY_RFBUS_GRANT_EN, AR_PHY_RFBUS_GRANT_EN)) {
                HALDEBUG(ah, HAL_DEBUG_ANY, "%s: could not kill baseband rx\n",
                    __func__);
                return AH_FALSE;
        }

        ar5416Set11nRegs(ah, chan);     /* NB: setup 5416-specific regs */

        /* Change the synth */
        if (!ar5212SetChannel(ah, chan))
                return AH_FALSE;

        /* Setup the transmit power values. */
        if (!ah->ah_setTxPower(ah, chan, rfXpdGain)) {
                HALDEBUG(ah, HAL_DEBUG_ANY,
                    "%s: error init'ing transmit power\n", __func__);
                return AH_FALSE;
        }

        /*
         * Wait for the frequency synth to settle (synth goes on
         * via PHY_ACTIVE_EN).  Read the phy active delay register.
         * Value is in 100ns increments.
         */
        data = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
        if (IS_CHAN_CCK(ichan)) {
                synthDelay = (4 * data) / 22;
        } else {
                synthDelay = data / 10;
        }

        OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY);

        /* Release the RFBus Grant */
        OS_REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);

        /* Write delta slope for OFDM enabled modes (A, G, Turbo) */
        if (IEEE80211_IS_CHAN_OFDM(ichan)|| IEEE80211_IS_CHAN_HT(chan)) {
                HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER5_3);
                ar5212SetSpurMitigation(ah, chan);
                ar5416SetDeltaSlope(ah, chan);
        }

        /* XXX spur mitigation for Melin */

        if (!IEEE80211_IS_CHAN_DFS(chan)) 
                chan->ic_state &= ~IEEE80211_CHANSTATE_CWINT;

        ichan->channel_time = 0;
        ichan->tsf_last = ar5416GetTsf64(ah);
        ar5212TxEnable(ah, AH_TRUE);
        return AH_TRUE;
}
#endif

static void
ar5416InitDMA(struct ath_hal *ah)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        /*
         * set AHB_MODE not to do cacheline prefetches
         */
        OS_REG_SET_BIT(ah, AR_AHB_MODE, AR_AHB_PREFETCH_RD_EN);

        /*
         * let mac dma reads be in 128 byte chunks
         */
        OS_REG_WRITE(ah, AR_TXCFG, 
                (OS_REG_READ(ah, AR_TXCFG) & ~AR_TXCFG_DMASZ_MASK) | AR_TXCFG_DMASZ_128B);

        /*
         * let mac dma writes be in 128 byte chunks
         */
        /*
         * XXX If you change this, you must change the headroom
         * assigned in ah_maxTxTrigLev - see ar5416InitState().
         */
        OS_REG_WRITE(ah, AR_RXCFG, 
                (OS_REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_DMASZ_MASK) | AR_RXCFG_DMASZ_128B);

        /* restore TX trigger level */
        OS_REG_WRITE(ah, AR_TXCFG,
                (OS_REG_READ(ah, AR_TXCFG) &~ AR_FTRIG) |
                    SM(ahp->ah_txTrigLev, AR_FTRIG));

        /*
         * Setup receive FIFO threshold to hold off TX activities
         */
        OS_REG_WRITE(ah, AR_RXFIFO_CFG, 0x200);

        /*
         * reduce the number of usable entries in PCU TXBUF to avoid
         * wrap around.
         */
        if (AR_SREV_KITE(ah))
                /*
                 * For AR9285 the number of Fifos are reduced to half.
                 * So set the usable tx buf size also to half to
                 * avoid data/delimiter underruns
                 */
                OS_REG_WRITE(ah, AR_PCU_TXBUF_CTRL, AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE);
        else
                OS_REG_WRITE(ah, AR_PCU_TXBUF_CTRL, AR_PCU_TXBUF_CTRL_USABLE_SIZE);
}

static void
ar5416InitBB(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
        uint32_t synthDelay;

        /*
         * Wait for the frequency synth to settle (synth goes on
         * via AR_PHY_ACTIVE_EN).  Read the phy active delay register.
         * Value is in 100ns increments.
          */
        synthDelay = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
        if (IEEE80211_IS_CHAN_CCK(chan)) {
                synthDelay = (4 * synthDelay) / 22;
        } else {
                synthDelay /= 10;
        }

        /* Turn on PLL on 5416 */
        HALDEBUG(ah, HAL_DEBUG_RESET, "%s %s channel\n",
            __func__, IEEE80211_IS_CHAN_5GHZ(chan) ? "5GHz" : "2GHz");

        /* Activate the PHY (includes baseband activate and synthesizer on) */
        OS_REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);

        /* 
         * If the AP starts the calibration before the base band timeout
         * completes  we could get rx_clear false triggering.  Add an
         * extra BASE_ACTIVATE_DELAY usecs to ensure this condition
         * does not happen.
         */
        if (IEEE80211_IS_CHAN_HALF(chan)) {
                OS_DELAY((synthDelay << 1) + BASE_ACTIVATE_DELAY);
        } else if (IEEE80211_IS_CHAN_QUARTER(chan)) {
                OS_DELAY((synthDelay << 2) + BASE_ACTIVATE_DELAY);
        } else {
                OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY);
        }
}

static void
ar5416InitIMR(struct ath_hal *ah, HAL_OPMODE opmode)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        /*
         * Setup interrupt handling.  Note that ar5212ResetTxQueue
         * manipulates the secondary IMR's as queues are enabled
         * and disabled.  This is done with RMW ops to insure the
         * settings we make here are preserved.
         */
        ahp->ah_maskReg = AR_IMR_TXERR | AR_IMR_TXURN
                        | AR_IMR_RXERR | AR_IMR_RXORN
                        | AR_IMR_BCNMISC;

#ifdef  AH_AR5416_INTERRUPT_MITIGATION
        ahp->ah_maskReg |= AR_IMR_RXINTM | AR_IMR_RXMINTR;
#else
        ahp->ah_maskReg |= AR_IMR_RXOK;
#endif  
        ahp->ah_maskReg |= AR_IMR_TXOK;

        if (opmode == HAL_M_HOSTAP)
                ahp->ah_maskReg |= AR_IMR_MIB;
        OS_REG_WRITE(ah, AR_IMR, ahp->ah_maskReg);

#ifdef  ADRIAN_NOTYET
        /* This is straight from ath9k */
        if (! AR_SREV_HOWL(ah)) {
                OS_REG_WRITE(ah, AR_INTR_SYNC_CAUSE, 0xFFFFFFFF);
                OS_REG_WRITE(ah, AR_INTR_SYNC_ENABLE, AR_INTR_SYNC_DEFAULT);
                OS_REG_WRITE(ah, AR_INTR_SYNC_MASK, 0);
        }
#endif

        /* Enable bus errors that are OR'd to set the HIUERR bit */
#if 0
        OS_REG_WRITE(ah, AR_IMR_S2, 
                OS_REG_READ(ah, AR_IMR_S2) | AR_IMR_S2_GTT | AR_IMR_S2_CST);
#endif
}

static void
ar5416InitQoS(struct ath_hal *ah)
{
        /* QoS support */
        OS_REG_WRITE(ah, AR_QOS_CONTROL, 0x100aa);      /* XXX magic */
        OS_REG_WRITE(ah, AR_QOS_SELECT, 0x3210);        /* XXX magic */

        /* Turn on NOACK Support for QoS packets */
        OS_REG_WRITE(ah, AR_NOACK,
                SM(2, AR_NOACK_2BIT_VALUE) |
                SM(5, AR_NOACK_BIT_OFFSET) |
                SM(0, AR_NOACK_BYTE_OFFSET));
                
        /*
         * initialize TXOP for all TIDs
         */
        OS_REG_WRITE(ah, AR_TXOP_X, AR_TXOP_X_VAL);
        OS_REG_WRITE(ah, AR_TXOP_0_3, 0xFFFFFFFF);
        OS_REG_WRITE(ah, AR_TXOP_4_7, 0xFFFFFFFF);
        OS_REG_WRITE(ah, AR_TXOP_8_11, 0xFFFFFFFF);
        OS_REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF);
}

static void
ar5416InitUserSettings(struct ath_hal *ah)
{
        struct ath_hal_5212 *ahp = AH5212(ah);

        /* Restore user-specified settings */
        if (ahp->ah_miscMode != 0)
                OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE)
                    | ahp->ah_miscMode);
        if (ahp->ah_sifstime != (u_int) -1)
                ar5212SetSifsTime(ah, ahp->ah_sifstime);
        if (ahp->ah_slottime != (u_int) -1)
                ar5212SetSlotTime(ah, ahp->ah_slottime);
        if (ahp->ah_acktimeout != (u_int) -1)
                ar5212SetAckTimeout(ah, ahp->ah_acktimeout);
        if (ahp->ah_ctstimeout != (u_int) -1)
                ar5212SetCTSTimeout(ah, ahp->ah_ctstimeout);
        if (AH_PRIVATE(ah)->ah_diagreg != 0)
                OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg);
        if (AH5416(ah)->ah_globaltxtimeout != (u_int) -1)
                ar5416SetGlobalTxTimeout(ah, AH5416(ah)->ah_globaltxtimeout);
}

static void
ar5416SetRfMode(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
        uint32_t rfMode;

        if (chan == AH_NULL)
                return;

        /* treat channel B as channel G , no  B mode suport in owl */
        rfMode = IEEE80211_IS_CHAN_CCK(chan) ?
            AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;

        if (AR_SREV_MERLIN_20(ah) && IS_5GHZ_FAST_CLOCK_EN(ah, chan)) {
                /* phy mode bits for 5GHz channels require Fast Clock */
                rfMode |= AR_PHY_MODE_DYNAMIC
                       |  AR_PHY_MODE_DYN_CCK_DISABLE;
        } else if (!AR_SREV_MERLIN_10_OR_LATER(ah)) {
                rfMode |= IEEE80211_IS_CHAN_5GHZ(chan) ?
                        AR_PHY_MODE_RF5GHZ : AR_PHY_MODE_RF2GHZ;
        }

        OS_REG_WRITE(ah, AR_PHY_MODE, rfMode);
}

/*
 * Places the hardware into reset and then pulls it out of reset
 */
HAL_BOOL
ar5416ChipReset(struct ath_hal *ah, const struct ieee80211_channel *chan,
    HAL_RESET_TYPE resetType)
{
        OS_MARK(ah, AH_MARK_CHIPRESET, chan ? chan->ic_freq : 0);
        /*
         * Warm reset is optimistic for open-loop TX power control.
         */
        if (AR_SREV_MERLIN(ah) &&
            ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) {
                if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON))
                        return AH_FALSE;
        } else if (ah->ah_config.ah_force_full_reset) {
                if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON))
                        return AH_FALSE;
        } else if ((resetType == HAL_RESET_FORCE_COLD) ||
            (resetType == HAL_RESET_BBPANIC)) {
                HALDEBUG(ah, HAL_DEBUG_RESET,
                    "%s: full reset; resetType=%d\n",
                    __func__, resetType);
                if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON))
                        return AH_FALSE;
        } else {
                if (!ar5416SetResetReg(ah, HAL_RESET_WARM))
                        return AH_FALSE;
        }

        /* Bring out of sleep mode (AGAIN) */
        if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE))
               return AH_FALSE;

#ifdef notyet
        ahp->ah_chipFullSleep = AH_FALSE;
#endif

        AH5416(ah)->ah_initPLL(ah, chan);

        /*
         * Perform warm reset before the mode/PLL/turbo registers
         * are changed in order to deactivate the radio.  Mode changes
         * with an active radio can result in corrupted shifts to the
         * radio device.
         */
        ar5416SetRfMode(ah, chan);

        return AH_TRUE; 
}

/*
 * Delta slope coefficient computation.
 * Required for OFDM operation.
 */
static void
ar5416GetDeltaSlopeValues(struct ath_hal *ah, uint32_t coef_scaled,
                          uint32_t *coef_mantissa, uint32_t *coef_exponent)
{
#define COEF_SCALE_S 24
    uint32_t coef_exp, coef_man;
    /*
     * ALGO -> coef_exp = 14-floor(log2(coef));
     * floor(log2(x)) is the highest set bit position
     */
    for (coef_exp = 31; coef_exp > 0; coef_exp--)
            if ((coef_scaled >> coef_exp) & 0x1)
                    break;
    /* A coef_exp of 0 is a legal bit position but an unexpected coef_exp */
    HALASSERT(coef_exp);
    coef_exp = 14 - (coef_exp - COEF_SCALE_S);

    /*
     * ALGO -> coef_man = floor(coef* 2^coef_exp+0.5);
     * The coefficient is already shifted up for scaling
     */
    coef_man = coef_scaled + (1 << (COEF_SCALE_S - coef_exp - 1));

    *coef_mantissa = coef_man >> (COEF_SCALE_S - coef_exp);
    *coef_exponent = coef_exp - 16;

#undef COEF_SCALE_S    
}

void
ar5416SetDeltaSlope(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
#define INIT_CLOCKMHZSCALED     0x64000000
        uint32_t coef_scaled, ds_coef_exp, ds_coef_man;
        uint32_t clockMhzScaled;

        CHAN_CENTERS centers;

        /* half and quarter rate can divide the scaled clock by 2 or 4 respectively */
        /* scale for selected channel bandwidth */ 
        clockMhzScaled = INIT_CLOCKMHZSCALED;
        if (IEEE80211_IS_CHAN_TURBO(chan))
                clockMhzScaled <<= 1;
        else if (IEEE80211_IS_CHAN_HALF(chan))
                clockMhzScaled >>= 1;
        else if (IEEE80211_IS_CHAN_QUARTER(chan))
                clockMhzScaled >>= 2;

        /*
         * ALGO -> coef = 1e8/fcarrier*fclock/40;
         * scaled coef to provide precision for this floating calculation 
         */
        ar5416GetChannelCenters(ah, chan, &centers);
        coef_scaled = clockMhzScaled / centers.synth_center;            

        ar5416GetDeltaSlopeValues(ah, coef_scaled, &ds_coef_man, &ds_coef_exp);

        OS_REG_RMW_FIELD(ah, AR_PHY_TIMING3,
                AR_PHY_TIMING3_DSC_MAN, ds_coef_man);
        OS_REG_RMW_FIELD(ah, AR_PHY_TIMING3,
                AR_PHY_TIMING3_DSC_EXP, ds_coef_exp);

        /*
         * For Short GI,
         * scaled coeff is 9/10 that of normal coeff
         */ 
        coef_scaled = (9 * coef_scaled)/10;

        ar5416GetDeltaSlopeValues(ah, coef_scaled, &ds_coef_man, &ds_coef_exp);

        /* for short gi */
        OS_REG_RMW_FIELD(ah, AR_PHY_HALFGI,
                AR_PHY_HALFGI_DSC_MAN, ds_coef_man);
        OS_REG_RMW_FIELD(ah, AR_PHY_HALFGI,
                AR_PHY_HALFGI_DSC_EXP, ds_coef_exp);    
#undef INIT_CLOCKMHZSCALED
}

/*
 * Set a limit on the overall output power.  Used for dynamic
 * transmit power control and the like.
 *
 * NB: limit is in units of 0.5 dbM.
 */
HAL_BOOL
ar5416SetTxPowerLimit(struct ath_hal *ah, uint32_t limit)
{
        uint16_t dummyXpdGains[2];

        AH_PRIVATE(ah)->ah_powerLimit = AH_MIN(limit, MAX_RATE_POWER);
        return ah->ah_setTxPower(ah, AH_PRIVATE(ah)->ah_curchan,
                        dummyXpdGains);
}

HAL_BOOL
ar5416GetChipPowerLimits(struct ath_hal *ah,
        struct ieee80211_channel *chan)
{
        struct ath_hal_5212 *ahp = AH5212(ah);
        int16_t minPower, maxPower;

        /*
         * Get Pier table max and min powers.
         */
        if (ahp->ah_rfHal->getChannelMaxMinPower(ah, chan, &maxPower, &minPower)) {
                /* NB: rf code returns 1/4 dBm units, convert */
                chan->ic_maxpower = maxPower / 2;
                chan->ic_minpower = minPower / 2;
        } else {
                HALDEBUG(ah, HAL_DEBUG_ANY,
                    "%s: no min/max power for %u/0x%x\n",
                    __func__, chan->ic_freq, chan->ic_flags);
                chan->ic_maxpower = AR5416_MAX_RATE_POWER;
                chan->ic_minpower = 0;
        }
        HALDEBUG(ah, HAL_DEBUG_RESET,
            "Chan %d: MaxPow = %d MinPow = %d\n",
            chan->ic_freq, chan->ic_maxpower, chan->ic_minpower);
        return AH_TRUE;
}

/**************************************************************
 * ar5416WriteTxPowerRateRegisters
 *
 * Write the TX power rate registers from the raw values given
 * in ratesArray[].
 *
 * The CCK and HT40 rate registers are only written if needed.
 * HT20 and 11g/11a OFDM rate registers are always written.
 *
 * The values written are raw values which should be written
 * to the registers - so it's up to the caller to pre-adjust
 * them (eg CCK power offset value, or Merlin TX power offset,
 * etc.)
 */
void
ar5416WriteTxPowerRateRegisters(struct ath_hal *ah,
    const struct ieee80211_channel *chan, const int16_t ratesArray[])
{
#define POW_SM(_r, _s)     (((_r) & 0x3f) << (_s))

    /* Write the OFDM power per rate set */
    OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
        POW_SM(ratesArray[rate18mb], 24)
          | POW_SM(ratesArray[rate12mb], 16)
          | POW_SM(ratesArray[rate9mb], 8)
          | POW_SM(ratesArray[rate6mb], 0)
    );
    OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE2,
        POW_SM(ratesArray[rate54mb], 24)
          | POW_SM(ratesArray[rate48mb], 16)
          | POW_SM(ratesArray[rate36mb], 8)
          | POW_SM(ratesArray[rate24mb], 0)
    );

    if (IEEE80211_IS_CHAN_2GHZ(chan)) {
        /* Write the CCK power per rate set */
        OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE3,
            POW_SM(ratesArray[rate2s], 24)
              | POW_SM(ratesArray[rate2l],  16)
              | POW_SM(ratesArray[rateXr],  8) /* XR target power */
              | POW_SM(ratesArray[rate1l],   0)
        );
        OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE4,
            POW_SM(ratesArray[rate11s], 24)
              | POW_SM(ratesArray[rate11l], 16)
              | POW_SM(ratesArray[rate5_5s], 8)
              | POW_SM(ratesArray[rate5_5l], 0)
        );
    HALDEBUG(ah, HAL_DEBUG_RESET,
        "%s AR_PHY_POWER_TX_RATE3=0x%x AR_PHY_POWER_TX_RATE4=0x%x\n",
            __func__, OS_REG_READ(ah,AR_PHY_POWER_TX_RATE3),
            OS_REG_READ(ah,AR_PHY_POWER_TX_RATE4)); 
    }

    /* Write the HT20 power per rate set */
    OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE5,
        POW_SM(ratesArray[rateHt20_3], 24)
          | POW_SM(ratesArray[rateHt20_2], 16)
          | POW_SM(ratesArray[rateHt20_1], 8)
          | POW_SM(ratesArray[rateHt20_0], 0)
    );
    OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE6,
        POW_SM(ratesArray[rateHt20_7], 24)
          | POW_SM(ratesArray[rateHt20_6], 16)
          | POW_SM(ratesArray[rateHt20_5], 8)
          | POW_SM(ratesArray[rateHt20_4], 0)
    );

    if (IEEE80211_IS_CHAN_HT40(chan)) {
        /* Write the HT40 power per rate set */
        OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE7,
            POW_SM(ratesArray[rateHt40_3], 24)
              | POW_SM(ratesArray[rateHt40_2], 16)
              | POW_SM(ratesArray[rateHt40_1], 8)
              | POW_SM(ratesArray[rateHt40_0], 0)
        );
        OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE8,
            POW_SM(ratesArray[rateHt40_7], 24)
              | POW_SM(ratesArray[rateHt40_6], 16)
              | POW_SM(ratesArray[rateHt40_5], 8)
              | POW_SM(ratesArray[rateHt40_4], 0)
        );
        /* Write the Dup/Ext 40 power per rate set */
        OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE9,
            POW_SM(ratesArray[rateExtOfdm], 24)
              | POW_SM(ratesArray[rateExtCck], 16)
              | POW_SM(ratesArray[rateDupOfdm], 8)
              | POW_SM(ratesArray[rateDupCck], 0)
        );
    }

    /*
     * Set max power to 30 dBm and, optionally,
     * enable TPC in tx descriptors.
     */
    OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE_MAX, MAX_RATE_POWER |
      (AH5212(ah)->ah_tpcEnabled ? AR_PHY_POWER_TX_RATE_MAX_TPC_ENABLE : 0));
#undef POW_SM
}

/**************************************************************
 * ar5416SetTransmitPower
 *
 * Set the transmit power in the baseband for the given
 * operating channel and mode.
 */
HAL_BOOL
ar5416SetTransmitPower(struct ath_hal *ah,
        const struct ieee80211_channel *chan, uint16_t *rfXpdGain)
{
#define N(a)            (sizeof (a) / sizeof (a[0]))
#define POW_SM(_r, _s)     (((_r) & 0x3f) << (_s))

    MODAL_EEP_HEADER    *pModal;
    struct ath_hal_5212 *ahp = AH5212(ah);
    int16_t             txPowerIndexOffset = 0;
    int                 i;
    
    uint16_t            cfgCtl;
    uint16_t            powerLimit;
    uint16_t            twiceAntennaReduction;
    uint16_t            twiceMaxRegulatoryPower;
    int16_t             maxPower;
    HAL_EEPROM_v14 *ee = AH_PRIVATE(ah)->ah_eeprom;
    struct ar5416eeprom *pEepData = &ee->ee_base;

    HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1);

    /*
     * Default to 2, is overridden based on the EEPROM version / value.
     */
    AH5416(ah)->ah_ht40PowerIncForPdadc = 2;

    /* Setup info for the actual eeprom */
    OS_MEMZERO(AH5416(ah)->ah_ratesArray, sizeof(AH5416(ah)->ah_ratesArray));
    cfgCtl = ath_hal_getctl(ah, chan);
    powerLimit = chan->ic_maxregpower * 2;
    twiceAntennaReduction = chan->ic_maxantgain;
    twiceMaxRegulatoryPower = AH_MIN(MAX_RATE_POWER, AH_PRIVATE(ah)->ah_powerLimit); 
    pModal = &pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)];
    HALDEBUG(ah, HAL_DEBUG_RESET, "%s Channel=%u CfgCtl=%u\n",
        __func__,chan->ic_freq, cfgCtl );      
  
    if (IS_EEP_MINOR_V2(ah)) {
        AH5416(ah)->ah_ht40PowerIncForPdadc = pModal->ht40PowerIncForPdadc;
    }

    if (!ar5416SetPowerPerRateTable(ah, pEepData,  chan,
                                    &AH5416(ah)->ah_ratesArray[0],
                                    cfgCtl,
                                    twiceAntennaReduction,
                                    twiceMaxRegulatoryPower, powerLimit)) {
        HALDEBUG(ah, HAL_DEBUG_ANY,
            "%s: unable to set tx power per rate table\n", __func__);
        return AH_FALSE;
    }

    if (!AH5416(ah)->ah_setPowerCalTable(ah,  pEepData, chan, &txPowerIndexOffset)) {
        HALDEBUG(ah, HAL_DEBUG_ANY, "%s: unable to set power table\n",
            __func__);
        return AH_FALSE;
    }
  
    maxPower = AH_MAX(AH5416(ah)->ah_ratesArray[rate6mb],
      AH5416(ah)->ah_ratesArray[rateHt20_0]);

    if (IEEE80211_IS_CHAN_2GHZ(chan)) {
        maxPower = AH_MAX(maxPower, AH5416(ah)->ah_ratesArray[rate1l]);
    }

    if (IEEE80211_IS_CHAN_HT40(chan)) {
        maxPower = AH_MAX(maxPower, AH5416(ah)->ah_ratesArray[rateHt40_0]);
    }

    ahp->ah_tx6PowerInHalfDbm = maxPower;   
    AH_PRIVATE(ah)->ah_maxPowerLevel = maxPower;
    ahp->ah_txPowerIndexOffset = txPowerIndexOffset;

    /*
     * txPowerIndexOffset is set by the SetPowerTable() call -
     *  adjust the rate table (0 offset if rates EEPROM not loaded)
     */
    for (i = 0; i < N(AH5416(ah)->ah_ratesArray); i++) {
        AH5416(ah)->ah_ratesArray[i] =
          (int16_t)(txPowerIndexOffset + AH5416(ah)->ah_ratesArray[i]);
        if (AH5416(ah)->ah_ratesArray[i] > AR5416_MAX_RATE_POWER)
            AH5416(ah)->ah_ratesArray[i] = AR5416_MAX_RATE_POWER;
    }

#ifdef AH_EEPROM_DUMP
    /*
     * Dump the rate array whilst it represents the intended dBm*2
     * values versus what's being adjusted before being programmed
     * in. Keep this in mind if you code up this function and enable
     * this debugging; the values won't necessarily be what's being
     * programmed into the hardware.
     */
    ar5416PrintPowerPerRate(ah, AH5416(ah)->ah_ratesArray);
#endif

    /*
     * Merlin and later have a power offset, so subtract
     * pwr_table_offset * 2 from each value. The default
     * power offset is -5 dBm - ie, a register value of 0
     * equates to a TX power of -5 dBm.
     */
    if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
        int8_t pwr_table_offset;

        (void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET,
            &pwr_table_offset);
        /* Underflow power gets clamped at raw value 0 */
        /* Overflow power gets camped at AR5416_MAX_RATE_POWER */
        for (i = 0; i < N(AH5416(ah)->ah_ratesArray); i++) {
                /*
                 * + pwr_table_offset is in dBm
                 * + ratesArray is in 1/2 dBm
                 */
                AH5416(ah)->ah_ratesArray[i] -= (pwr_table_offset * 2);
                if (AH5416(ah)->ah_ratesArray[i] < 0)
                        AH5416(ah)->ah_ratesArray[i] = 0;
                else if (AH5416(ah)->ah_ratesArray[i] > AR5416_MAX_RATE_POWER)
                    AH5416(ah)->ah_ratesArray[i] = AR5416_MAX_RATE_POWER;
        }
    }

    /*
     * Adjust rates for OLC where needed
     *
     * The following CCK rates need adjusting when doing 2.4ghz
     * CCK transmission.
     *
     * + rate2s, rate2l, rate1l, rate11s, rate11l, rate5_5s, rate5_5l
     * + rateExtCck, rateDupCck
     *
     * They're adjusted here regardless. The hardware then gets
     * programmed as needed. 5GHz operation doesn't program in CCK
     * rates for legacy mode but they seem to be initialised for
     * HT40 regardless of channel type.
     */
    if (AR_SREV_MERLIN_20_OR_LATER(ah) &&
            ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) {
        int adj[] = {
                      rate2s, rate2l, rate1l, rate11s, rate11l,
                      rate5_5s, rate5_5l, rateExtCck, rateDupCck
                    };
        int cck_ofdm_delta = 2;
        int i;
        for (i = 0; i < N(adj); i++) {
            AH5416(ah)->ah_ratesArray[adj[i]] -= cck_ofdm_delta;
            if (AH5416(ah)->ah_ratesArray[adj[i]] < 0)
                AH5416(ah)->ah_ratesArray[adj[i]] = 0;
        }
    }

    /*
     * Adjust the HT40 power to meet the correct target TX power
     * for 40MHz mode, based on TX power curves that are established
     * for 20MHz mode.
     *
     * XXX handle overflow/too high power level?
     */
    if (IEEE80211_IS_CHAN_HT40(chan)) {
        AH5416(ah)->ah_ratesArray[rateHt40_0] +=
          AH5416(ah)->ah_ht40PowerIncForPdadc;
        AH5416(ah)->ah_ratesArray[rateHt40_1] +=
          AH5416(ah)->ah_ht40PowerIncForPdadc;
        AH5416(ah)->ah_ratesArray[rateHt40_2] += AH5416(ah)->ah_ht40PowerIncForPdadc;
        AH5416(ah)->ah_ratesArray[rateHt40_3] += AH5416(ah)->ah_ht40PowerIncForPdadc;
        AH5416(ah)->ah_ratesArray[rateHt40_4] += AH5416(ah)->ah_ht40PowerIncForPdadc;
        AH5416(ah)->ah_ratesArray[rateHt40_5] += AH5416(ah)->ah_ht40PowerIncForPdadc;
        AH5416(ah)->ah_ratesArray[rateHt40_6] += AH5416(ah)->ah_ht40PowerIncForPdadc;
        AH5416(ah)->ah_ratesArray[rateHt40_7] += AH5416(ah)->ah_ht40PowerIncForPdadc;
    }

    /* Write the TX power rate registers */
    ar5416WriteTxPowerRateRegisters(ah, chan, AH5416(ah)->ah_ratesArray);

    /* Write the Power subtraction for dynamic chain changing, for per-packet powertx */
    OS_REG_WRITE(ah, AR_PHY_POWER_TX_SUB,
        POW_SM(pModal->pwrDecreaseFor3Chain, 6)
          | POW_SM(pModal->pwrDecreaseFor2Chain, 0)
    );
    return AH_TRUE;
#undef POW_SM
#undef N
}

/*
 * Exported call to check for a recent gain reading and return
 * the current state of the thermal calibration gain engine.
 */
HAL_RFGAIN
ar5416GetRfgain(struct ath_hal *ah)
{

        return (HAL_RFGAIN_INACTIVE);
}

/*
 * Places all of hardware into reset
 */
HAL_BOOL
ar5416Disable(struct ath_hal *ah)
{

        if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE))
                return AH_FALSE;
        if (! ar5416SetResetReg(ah, HAL_RESET_COLD))
                return AH_FALSE;

        AH5416(ah)->ah_initPLL(ah, AH_NULL);
        return (AH_TRUE);
}

/*
 * Places the PHY and Radio chips into reset.  A full reset
 * must be called to leave this state.  The PCI/MAC/PCU are
 * not placed into reset as we must receive interrupt to
 * re-enable the hardware.
 */
HAL_BOOL
ar5416PhyDisable(struct ath_hal *ah)
{

        if (! ar5416SetResetReg(ah, HAL_RESET_WARM))
                return AH_FALSE;

        AH5416(ah)->ah_initPLL(ah, AH_NULL);
        return (AH_TRUE);
}

/*
 * Write the given reset bit mask into the reset register
 */
HAL_BOOL
ar5416SetResetReg(struct ath_hal *ah, uint32_t type)
{
        /*
         * Set force wake
         */
        OS_REG_WRITE(ah, AR_RTC_FORCE_WAKE,
            AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT);

        switch (type) {
        case HAL_RESET_POWER_ON:
                return ar5416SetResetPowerOn(ah);
        case HAL_RESET_WARM:
        case HAL_RESET_COLD:
                return ar5416SetReset(ah, type);
        default:
                HALASSERT(AH_FALSE);
                return AH_FALSE;
        }
}

static HAL_BOOL
ar5416SetResetPowerOn(struct ath_hal *ah)
{
    /* Power On Reset (Hard Reset) */

    /*
     * Set force wake
     *  
     * If the MAC was running, previously calling
     * reset will wake up the MAC but it may go back to sleep
     * before we can start polling. 
     * Set force wake  stops that 
     * This must be called before initiating a hard reset.
     */
    OS_REG_WRITE(ah, AR_RTC_FORCE_WAKE,
            AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT);    

    /*
     * PowerOn reset can be used in open loop power control or failure recovery.
     * If we do RTC reset while DMA is still running, hardware may corrupt memory.
     * Therefore, we need to reset AHB first to stop DMA.
     */
    if (! AR_SREV_HOWL(ah))
        OS_REG_WRITE(ah, AR_RC, AR_RC_AHB);
    /*
     * RTC reset and clear
     */
    OS_REG_WRITE(ah, AR_RTC_RESET, 0);
    OS_DELAY(20);

    if (! AR_SREV_HOWL(ah))
        OS_REG_WRITE(ah, AR_RC, 0);

    OS_REG_WRITE(ah, AR_RTC_RESET, 1);

    /*
     * Poll till RTC is ON
     */
    if (!ath_hal_wait(ah, AR_RTC_STATUS, AR_RTC_PM_STATUS_M, AR_RTC_STATUS_ON)) {
        HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RTC not waking up\n", __func__);
        return AH_FALSE;
    }

    return ar5416SetReset(ah, HAL_RESET_COLD);
}

static HAL_BOOL
ar5416SetReset(struct ath_hal *ah, int type)
{
    uint32_t tmpReg, mask;
    uint32_t rst_flags;

#ifdef  AH_SUPPORT_AR9130       /* Because of the AR9130 specific registers */
    if (AR_SREV_HOWL(ah)) {
        HALDEBUG(ah, HAL_DEBUG_ANY, "[ath] HOWL: Fiddling with derived clk!\n");
        uint32_t val = OS_REG_READ(ah, AR_RTC_DERIVED_CLK);
        val &= ~AR_RTC_DERIVED_CLK_PERIOD;
        val |= SM(1, AR_RTC_DERIVED_CLK_PERIOD);
        OS_REG_WRITE(ah, AR_RTC_DERIVED_CLK, val);
        (void) OS_REG_READ(ah, AR_RTC_DERIVED_CLK);
    }
#endif  /* AH_SUPPORT_AR9130 */

    /*
     * Force wake
     */
    OS_REG_WRITE(ah, AR_RTC_FORCE_WAKE,
        AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT);

#ifdef  AH_SUPPORT_AR9130
    if (AR_SREV_HOWL(ah)) {
        rst_flags = AR_RTC_RC_MAC_WARM | AR_RTC_RC_MAC_COLD |
          AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET;
    } else {
#endif  /* AH_SUPPORT_AR9130 */
        /*
         * Reset AHB
         *
         * (In case the last interrupt source was a bus timeout.)
         * XXX TODO: this is not the way to do it! It should be recorded
         * XXX by the interrupt handler and passed _into_ the
         * XXX reset path routine so this occurs.
         */
        tmpReg = OS_REG_READ(ah, AR_INTR_SYNC_CAUSE);
        if (tmpReg & (AR_INTR_SYNC_LOCAL_TIMEOUT|AR_INTR_SYNC_RADM_CPL_TIMEOUT)) {
            OS_REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
            OS_REG_WRITE(ah, AR_RC, AR_RC_AHB|AR_RC_HOSTIF);
        } else {
            OS_REG_WRITE(ah, AR_RC, AR_RC_AHB);
        }
        rst_flags = AR_RTC_RC_MAC_WARM;
        if (type == HAL_RESET_COLD)
            rst_flags |= AR_RTC_RC_MAC_COLD;
#ifdef  AH_SUPPORT_AR9130
    }
#endif  /* AH_SUPPORT_AR9130 */

    OS_REG_WRITE(ah, AR_RTC_RC, rst_flags);

    if (AR_SREV_HOWL(ah))
        OS_DELAY(10000);
    else
        OS_DELAY(100);

    /*
     * Clear resets and force wakeup
     */
    OS_REG_WRITE(ah, AR_RTC_RC, 0);
    if (!ath_hal_wait(ah, AR_RTC_RC, AR_RTC_RC_M, 0)) {
        HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RTC stuck in MAC reset\n", __func__);
        return AH_FALSE;
    }

    /* Clear AHB reset */
    if (! AR_SREV_HOWL(ah))
        OS_REG_WRITE(ah, AR_RC, 0);

    if (AR_SREV_HOWL(ah))
        OS_DELAY(50);

    if (AR_SREV_HOWL(ah)) {
                uint32_t mask;
                mask = OS_REG_READ(ah, AR_CFG);
                if (mask & (AR_CFG_SWRB | AR_CFG_SWTB | AR_CFG_SWRG)) {
                        HALDEBUG(ah, HAL_DEBUG_RESET,
                                "CFG Byte Swap Set 0x%x\n", mask);
                } else {
                        mask =  
                                INIT_CONFIG_STATUS | AR_CFG_SWRB | AR_CFG_SWTB;
                        OS_REG_WRITE(ah, AR_CFG, mask);
                        HALDEBUG(ah, HAL_DEBUG_RESET,
                                "Setting CFG 0x%x\n", OS_REG_READ(ah, AR_CFG));
                }
    } else {
        if (type == HAL_RESET_COLD) {
                if (isBigEndian()) {
                        /*
                         * Set CFG, little-endian for descriptor accesses.
                         */
                        mask = INIT_CONFIG_STATUS | AR_CFG_SWRD;
#ifndef AH_NEED_DESC_SWAP
                        mask |= AR_CFG_SWTD;
#endif
                        HALDEBUG(ah, HAL_DEBUG_RESET,
                            "%s Applying descriptor swap\n", __func__);
                        OS_REG_WRITE(ah, AR_CFG, mask);
                } else
                        OS_REG_WRITE(ah, AR_CFG, INIT_CONFIG_STATUS);
        }
    }

    return AH_TRUE;
}

void
ar5416InitChainMasks(struct ath_hal *ah)
{
        int rx_chainmask = AH5416(ah)->ah_rx_chainmask;

        /* Flip this for this chainmask regardless of chip */
        if (rx_chainmask == 0x5)
                OS_REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP, AR_PHY_SWAP_ALT_CHAIN);

        /*
         * Workaround for OWL 1.0 calibration failure; enable multi-chain;
         * then set true mask after calibration.
         */
        if (IS_5416V1(ah) && (rx_chainmask == 0x5 || rx_chainmask == 0x3)) {
                OS_REG_WRITE(ah, AR_PHY_RX_CHAINMASK, 0x7);
                OS_REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, 0x7);
        } else {
                OS_REG_WRITE(ah, AR_PHY_RX_CHAINMASK, AH5416(ah)->ah_rx_chainmask);
                OS_REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, AH5416(ah)->ah_rx_chainmask);
        }
        OS_REG_WRITE(ah, AR_SELFGEN_MASK, AH5416(ah)->ah_tx_chainmask);

        if (AH5416(ah)->ah_tx_chainmask == 0x5)
                OS_REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP, AR_PHY_SWAP_ALT_CHAIN);

        if (AR_SREV_HOWL(ah)) {
                OS_REG_WRITE(ah, AR_PHY_ANALOG_SWAP,
                OS_REG_READ(ah, AR_PHY_ANALOG_SWAP) | 0x00000001);
        }
}

/*
 * Work-around for Owl 1.0 calibration failure.
 *
 * ar5416InitChainMasks sets the RX chainmask to 0x7 if it's Owl 1.0
 * due to init calibration failures. ar5416RestoreChainMask restores
 * these registers to the correct setting.
 */
void
ar5416RestoreChainMask(struct ath_hal *ah)
{
        int rx_chainmask = AH5416(ah)->ah_rx_chainmask;

        if (IS_5416V1(ah) && (rx_chainmask == 0x5 || rx_chainmask == 0x3)) {
                OS_REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx_chainmask);
                OS_REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx_chainmask);
        }
}

void
ar5416InitPLL(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
        uint32_t pll = AR_RTC_PLL_REFDIV_5 | AR_RTC_PLL_DIV2;
        if (chan != AH_NULL) {
                if (IEEE80211_IS_CHAN_HALF(chan))
                        pll |= SM(0x1, AR_RTC_PLL_CLKSEL);
                else if (IEEE80211_IS_CHAN_QUARTER(chan))
                        pll |= SM(0x2, AR_RTC_PLL_CLKSEL);

                if (IEEE80211_IS_CHAN_5GHZ(chan))
                        pll |= SM(0xa, AR_RTC_PLL_DIV);
                else
                        pll |= SM(0xb, AR_RTC_PLL_DIV);
        } else
                pll |= SM(0xb, AR_RTC_PLL_DIV);

        OS_REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll);

        /* TODO:
        * For multi-band owl, switch between bands by reiniting the PLL.
        */

        OS_DELAY(RTC_PLL_SETTLE_DELAY);

        OS_REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_SLEEP_DERIVED_CLK);
}

static void
ar5416SetDefGainValues(struct ath_hal *ah,
    const MODAL_EEP_HEADER *pModal,
    const struct ar5416eeprom *eep,
    uint8_t txRxAttenLocal, int regChainOffset, int i)
{

        if (IS_EEP_MINOR_V3(ah)) {
                txRxAttenLocal = pModal->txRxAttenCh[i];

                if (AR_SREV_MERLIN_10_OR_LATER(ah)) {
                        OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
                              AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN,
                              pModal->bswMargin[i]);
                        OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
                              AR_PHY_GAIN_2GHZ_XATTEN1_DB,
                              pModal->bswAtten[i]);
                        OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
                              AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN,
                              pModal->xatten2Margin[i]);
                        OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
                              AR_PHY_GAIN_2GHZ_XATTEN2_DB,
                              pModal->xatten2Db[i]);
                } else {
                        OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
                              AR_PHY_GAIN_2GHZ_BSW_MARGIN,
                              pModal->bswMargin[i]);
                        OS_REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset,
                              AR_PHY_GAIN_2GHZ_BSW_ATTEN,
                              pModal->bswAtten[i]);
                }
        }

        if (AR_SREV_MERLIN_10_OR_LATER(ah)) {
                OS_REG_RMW_FIELD(ah,
                      AR_PHY_RXGAIN + regChainOffset,
                      AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
                OS_REG_RMW_FIELD(ah,
                      AR_PHY_RXGAIN + regChainOffset,
                      AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]);
        } else {
                OS_REG_RMW_FIELD(ah,
                          AR_PHY_RXGAIN + regChainOffset,
                          AR_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal);
                OS_REG_RMW_FIELD(ah,
                          AR_PHY_GAIN_2GHZ + regChainOffset,
                          AR_PHY_GAIN_2GHZ_RXTX_MARGIN, pModal->rxTxMarginCh[i]);
        }
}

/*
 * Get the register chain offset for the given chain.
 *
 * Take into account the register chain swapping with AR5416 v2.0.
 *
 * XXX make sure that the reg chain swapping is only done for
 * XXX AR5416 v2.0 or greater, and not later chips?
 */
int
ar5416GetRegChainOffset(struct ath_hal *ah, int i)
{
        int regChainOffset;

        if (AR_SREV_5416_V20_OR_LATER(ah) && 
            (AH5416(ah)->ah_rx_chainmask == 0x5 ||
            AH5416(ah)->ah_tx_chainmask == 0x5) && (i != 0)) {
                /* Regs are swapped from chain 2 to 1 for 5416 2_0 with 
                 * only chains 0 and 2 populated 
                 */
                regChainOffset = (i == 1) ? 0x2000 : 0x1000;
        } else {
                regChainOffset = i * 0x1000;
        }

        return regChainOffset;
}

/*
 * Read EEPROM header info and program the device for correct operation
 * given the channel value.
 */
HAL_BOOL
ar5416SetBoardValues(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
    const HAL_EEPROM_v14 *ee = AH_PRIVATE(ah)->ah_eeprom;
    const struct ar5416eeprom *eep = &ee->ee_base;
    const MODAL_EEP_HEADER *pModal;
    int                 i, regChainOffset;
    uint8_t             txRxAttenLocal;    /* workaround for eeprom versions <= 14.2 */

    HALASSERT(AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER14_1);
    pModal = &eep->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)];

    /* NB: workaround for eeprom versions <= 14.2 */
    txRxAttenLocal = IEEE80211_IS_CHAN_2GHZ(chan) ? 23 : 44;

    OS_REG_WRITE(ah, AR_PHY_SWITCH_COM, pModal->antCtrlCommon);
    for (i = 0; i < AR5416_MAX_CHAINS; i++) { 
           if (AR_SREV_MERLIN(ah)) {
                if (i >= 2) break;
           }
        regChainOffset = ar5416GetRegChainOffset(ah, i);

        OS_REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset, pModal->antCtrlChain[i]);

        OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4 + regChainOffset, 
                (OS_REG_READ(ah, AR_PHY_TIMING_CTRL4 + regChainOffset) &
                ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) |
                SM(pModal->iqCalICh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) |
                SM(pModal->iqCalQCh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF));

        /*
         * Large signal upgrade,
         * If 14.3 or later EEPROM, use
         * txRxAttenLocal = pModal->txRxAttenCh[i]
         * else txRxAttenLocal is fixed value above.
         */

        if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah))
            ar5416SetDefGainValues(ah, pModal, eep, txRxAttenLocal, regChainOffset, i);
    }

        if (AR_SREV_MERLIN_10_OR_LATER(ah)) {
                if (IEEE80211_IS_CHAN_2GHZ(chan)) {
                        OS_A_REG_RMW_FIELD(ah, AR_AN_RF2G1_CH0, AR_AN_RF2G1_CH0_OB, pModal->ob);
                        OS_A_REG_RMW_FIELD(ah, AR_AN_RF2G1_CH0, AR_AN_RF2G1_CH0_DB, pModal->db);
                        OS_A_REG_RMW_FIELD(ah, AR_AN_RF2G1_CH1, AR_AN_RF2G1_CH1_OB, pModal->ob_ch1);
                        OS_A_REG_RMW_FIELD(ah, AR_AN_RF2G1_CH1, AR_AN_RF2G1_CH1_DB, pModal->db_ch1);
                } else {
                        OS_A_REG_RMW_FIELD(ah, AR_AN_RF5G1_CH0, AR_AN_RF5G1_CH0_OB5, pModal->ob);
                        OS_A_REG_RMW_FIELD(ah, AR_AN_RF5G1_CH0, AR_AN_RF5G1_CH0_DB5, pModal->db);
                        OS_A_REG_RMW_FIELD(ah, AR_AN_RF5G1_CH1, AR_AN_RF5G1_CH1_OB5, pModal->ob_ch1);
                        OS_A_REG_RMW_FIELD(ah, AR_AN_RF5G1_CH1, AR_AN_RF5G1_CH1_DB5, pModal->db_ch1);
                }
                OS_A_REG_RMW_FIELD(ah, AR_AN_TOP2, AR_AN_TOP2_XPABIAS_LVL, pModal->xpaBiasLvl);
                OS_A_REG_RMW_FIELD(ah, AR_AN_TOP2, AR_AN_TOP2_LOCALBIAS,
                    !!(pModal->flagBits & AR5416_EEP_FLAG_LOCALBIAS));
                OS_A_REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
                    !!(pModal->flagBits & AR5416_EEP_FLAG_FORCEXPAON));
        }

    OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, pModal->switchSettling);
    OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_ADC, pModal->adcDesiredSize);

    if (! AR_SREV_MERLIN_10_OR_LATER(ah))
        OS_REG_RMW_FIELD(ah, AR_PHY_DESIRED_SZ, AR_PHY_DESIRED_SZ_PGA, pModal->pgaDesiredSize);

    OS_REG_WRITE(ah, AR_PHY_RF_CTL4,
        SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAA_OFF)
        | SM(pModal->txEndToXpaOff, AR_PHY_RF_CTL4_TX_END_XPAB_OFF)
        | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAA_ON)
        | SM(pModal->txFrameToXpaOn, AR_PHY_RF_CTL4_FRAME_XPAB_ON));

    OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
        pModal->txEndToRxOn);

    if (AR_SREV_MERLIN_10_OR_LATER(ah)) {
        OS_REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
            pModal->thresh62);
        OS_REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62,
            pModal->thresh62);
    } else {
        OS_REG_RMW_FIELD(ah, AR_PHY_CCA, AR_PHY_CCA_THRESH62,
            pModal->thresh62);
        OS_REG_RMW_FIELD(ah, AR_PHY_EXT_CCA, AR_PHY_EXT_CCA_THRESH62,
            pModal->thresh62);
    }
    
    /* Minor Version Specific application */
    if (IS_EEP_MINOR_V2(ah)) {
        OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_FRAME_TO_DATA_START,
            pModal->txFrameToDataStart);
        OS_REG_RMW_FIELD(ah, AR_PHY_RF_CTL2, AR_PHY_TX_FRAME_TO_PA_ON,
            pModal->txFrameToPaOn);    
    }   

    if (IS_EEP_MINOR_V3(ah) && IEEE80211_IS_CHAN_HT40(chan))
                /* Overwrite switch settling with HT40 value */
                OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
                    pModal->swSettleHt40);

    if (AR_SREV_MERLIN_20_OR_LATER(ah) && EEP_MINOR(ah) >= AR5416_EEP_MINOR_VER_19)
         OS_REG_RMW_FIELD(ah, AR_PHY_CCK_TX_CTRL, AR_PHY_CCK_TX_CTRL_TX_DAC_SCALE_CCK, pModal->miscBits);

        if (AR_SREV_MERLIN_20(ah) && EEP_MINOR(ah) >= AR5416_EEP_MINOR_VER_20) {
                if (IEEE80211_IS_CHAN_2GHZ(chan))
                        OS_A_REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
                            eep->baseEepHeader.dacLpMode);
                else if (eep->baseEepHeader.dacHiPwrMode_5G)
                        OS_A_REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE, 0);
                else
                        OS_A_REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
                            eep->baseEepHeader.dacLpMode);

                OS_DELAY(100);

                OS_REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP,
                    pModal->miscBits >> 2);
                OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL9, AR_PHY_TX_DESIRED_SCALE_CCK,
                    eep->baseEepHeader.desiredScaleCCK);
        }

    return (AH_TRUE);
}

/*
 * Helper functions common for AP/CB/XB
 */

/*
 * Set the target power array "ratesArray" from the
 * given set of target powers.
 *
 * This is used by the various chipset/EEPROM TX power
 * setup routines.
 */ 
void
ar5416SetRatesArrayFromTargetPower(struct ath_hal *ah,
    const struct ieee80211_channel *chan,
    int16_t *ratesArray,
    const CAL_TARGET_POWER_LEG *targetPowerCck,
    const CAL_TARGET_POWER_LEG *targetPowerCckExt,
    const CAL_TARGET_POWER_LEG *targetPowerOfdm,
    const CAL_TARGET_POWER_LEG *targetPowerOfdmExt,
    const CAL_TARGET_POWER_HT *targetPowerHt20,
    const CAL_TARGET_POWER_HT *targetPowerHt40)
{
#define N(a)    (sizeof(a)/sizeof(a[0]))
        int i;

        /* Blank the rates array, to be consistent */
        for (i = 0; i < Ar5416RateSize; i++)
                ratesArray[i] = 0;

        /* Set rates Array from collected data */
        ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] =
        ratesArray[rate18mb] = ratesArray[rate24mb] =
            targetPowerOfdm->tPow2x[0];
        ratesArray[rate36mb] = targetPowerOfdm->tPow2x[1];
        ratesArray[rate48mb] = targetPowerOfdm->tPow2x[2];
        ratesArray[rate54mb] = targetPowerOfdm->tPow2x[3];
        ratesArray[rateXr] = targetPowerOfdm->tPow2x[0];

        for (i = 0; i < N(targetPowerHt20->tPow2x); i++) {
                ratesArray[rateHt20_0 + i] = targetPowerHt20->tPow2x[i];
        }

        if (IEEE80211_IS_CHAN_2GHZ(chan)) {
                ratesArray[rate1l]  = targetPowerCck->tPow2x[0];
                ratesArray[rate2s] = ratesArray[rate2l]  = targetPowerCck->tPow2x[1];
                ratesArray[rate5_5s] = ratesArray[rate5_5l] = targetPowerCck->tPow2x[2];
                ratesArray[rate11s] = ratesArray[rate11l] = targetPowerCck->tPow2x[3];
        }
        if (IEEE80211_IS_CHAN_HT40(chan)) {
                for (i = 0; i < N(targetPowerHt40->tPow2x); i++) {
                        ratesArray[rateHt40_0 + i] = targetPowerHt40->tPow2x[i];
                }
                ratesArray[rateDupOfdm] = targetPowerHt40->tPow2x[0];
                ratesArray[rateDupCck]  = targetPowerHt40->tPow2x[0];
                ratesArray[rateExtOfdm] = targetPowerOfdmExt->tPow2x[0];
                if (IEEE80211_IS_CHAN_2GHZ(chan)) {
                        ratesArray[rateExtCck]  = targetPowerCckExt->tPow2x[0];
                }
        }
#undef  N
}

/*
 * ar5416SetPowerPerRateTable
 *
 * Sets the transmit power in the baseband for the given
 * operating channel and mode.
 */
static HAL_BOOL
ar5416SetPowerPerRateTable(struct ath_hal *ah, struct ar5416eeprom *pEepData,
                           const struct ieee80211_channel *chan,
                           int16_t *ratesArray, uint16_t cfgCtl,
                           uint16_t AntennaReduction, 
                           uint16_t twiceMaxRegulatoryPower,
                           uint16_t powerLimit)
{
#define N(a)    (sizeof(a)/sizeof(a[0]))
/* Local defines to distinguish between extension and control CTL's */
#define EXT_ADDITIVE (0x8000)
#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE)
#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE)
#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE)

        uint16_t twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
        int i;
        int16_t  twiceLargestAntenna;
        CAL_CTL_DATA *rep;
        CAL_TARGET_POWER_LEG targetPowerOfdm, targetPowerCck = {0, {0, 0, 0, 0}};
        CAL_TARGET_POWER_LEG targetPowerOfdmExt = {0, {0, 0, 0, 0}}, targetPowerCckExt = {0, {0, 0, 0, 0}};
        CAL_TARGET_POWER_HT  targetPowerHt20, targetPowerHt40 = {0, {0, 0, 0, 0}};
        int16_t scaledPower, minCtlPower;

#define SUB_NUM_CTL_MODES_AT_5G_40 2   /* excluding HT40, EXT-OFDM */
#define SUB_NUM_CTL_MODES_AT_2G_40 3   /* excluding HT40, EXT-OFDM, EXT-CCK */
        static const uint16_t ctlModesFor11a[] = {
           CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40
        };
        static const uint16_t ctlModesFor11g[] = {
           CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40
        };
        const uint16_t *pCtlMode;
        uint16_t numCtlModes, ctlMode, freq;
        CHAN_CENTERS centers;

        ar5416GetChannelCenters(ah,  chan, &centers);

        /* Compute TxPower reduction due to Antenna Gain */

        twiceLargestAntenna = AH_MAX(AH_MAX(
            pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].antennaGainCh[0],
            pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].antennaGainCh[1]),
            pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].antennaGainCh[2]);
#if 0
        /* Turn it back on if we need to calculate per chain antenna gain reduction */
        /* Use only if the expected gain > 6dbi */
        /* Chain 0 is always used */
        twiceLargestAntenna = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].antennaGainCh[0];

        /* Look at antenna gains of Chains 1 and 2 if the TX mask is set */
        if (ahp->ah_tx_chainmask & 0x2)
                twiceLargestAntenna = AH_MAX(twiceLargestAntenna,
                        pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].antennaGainCh[1]);

        if (ahp->ah_tx_chainmask & 0x4)
                twiceLargestAntenna = AH_MAX(twiceLargestAntenna,
                        pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].antennaGainCh[2]);
#endif
        twiceLargestAntenna = (int16_t)AH_MIN((AntennaReduction) - twiceLargestAntenna, 0);

        /* XXX setup for 5212 use (really used?) */
        ath_hal_eepromSet(ah,
            IEEE80211_IS_CHAN_2GHZ(chan) ? AR_EEP_ANTGAINMAX_2 : AR_EEP_ANTGAINMAX_5,
            twiceLargestAntenna);

        /* 
         * scaledPower is the minimum of the user input power level and
         * the regulatory allowed power level
         */
        scaledPower = AH_MIN(powerLimit, twiceMaxRegulatoryPower + twiceLargestAntenna);

        /* Reduce scaled Power by number of chains active to get to per chain tx power level */
        /* TODO: better value than these? */
        switch (owl_get_ntxchains(AH5416(ah)->ah_tx_chainmask)) {
        case 1:
                break;
        case 2:
                scaledPower -= pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].pwrDecreaseFor2Chain;
                break;
        case 3:
                scaledPower -= pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].pwrDecreaseFor3Chain;
                break;
        default:
                return AH_FALSE; /* Unsupported number of chains */
        }

        scaledPower = AH_MAX(0, scaledPower);

        /* Get target powers from EEPROM - our baseline for TX Power */
        if (IEEE80211_IS_CHAN_2GHZ(chan)) {
                /* Setup for CTL modes */
                numCtlModes = N(ctlModesFor11g) - SUB_NUM_CTL_MODES_AT_2G_40; /* CTL_11B, CTL_11G, CTL_2GHT20 */
                pCtlMode = ctlModesFor11g;

                ar5416GetTargetPowersLeg(ah,  chan, pEepData->calTargetPowerCck,
                                AR5416_NUM_2G_CCK_TARGET_POWERS, &targetPowerCck, 4, AH_FALSE);
                ar5416GetTargetPowersLeg(ah,  chan, pEepData->calTargetPower2G,
                                AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerOfdm, 4, AH_FALSE);
                ar5416GetTargetPowers(ah,  chan, pEepData->calTargetPower2GHT20,
                                AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerHt20, 8, AH_FALSE);

                if (IEEE80211_IS_CHAN_HT40(chan)) {
                        numCtlModes = N(ctlModesFor11g);    /* All 2G CTL's */

                        ar5416GetTargetPowers(ah,  chan, pEepData->calTargetPower2GHT40,
                                AR5416_NUM_2G_40_TARGET_POWERS, &targetPowerHt40, 8, AH_TRUE);
                        /* Get target powers for extension channels */
                        ar5416GetTargetPowersLeg(ah,  chan, pEepData->calTargetPowerCck,
                                AR5416_NUM_2G_CCK_TARGET_POWERS, &targetPowerCckExt, 4, AH_TRUE);
                        ar5416GetTargetPowersLeg(ah,  chan, pEepData->calTargetPower2G,
                                AR5416_NUM_2G_20_TARGET_POWERS, &targetPowerOfdmExt, 4, AH_TRUE);
                }
        } else {
                /* Setup for CTL modes */
                numCtlModes = N(ctlModesFor11a) - SUB_NUM_CTL_MODES_AT_5G_40; /* CTL_11A, CTL_5GHT20 */
                pCtlMode = ctlModesFor11a;

                ar5416GetTargetPowersLeg(ah,  chan, pEepData->calTargetPower5G,
                                AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerOfdm, 4, AH_FALSE);
                ar5416GetTargetPowers(ah,  chan, pEepData->calTargetPower5GHT20,
                                AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerHt20, 8, AH_FALSE);

                if (IEEE80211_IS_CHAN_HT40(chan)) {
                        numCtlModes = N(ctlModesFor11a); /* All 5G CTL's */

                        ar5416GetTargetPowers(ah,  chan, pEepData->calTargetPower5GHT40,
                                AR5416_NUM_5G_40_TARGET_POWERS, &targetPowerHt40, 8, AH_TRUE);
                        ar5416GetTargetPowersLeg(ah,  chan, pEepData->calTargetPower5G,
                                AR5416_NUM_5G_20_TARGET_POWERS, &targetPowerOfdmExt, 4, AH_TRUE);
                }
        }

        /*
         * For MIMO, need to apply regulatory caps individually across dynamically
         * running modes: CCK, OFDM, HT20, HT40
         *
         * The outer loop walks through each possible applicable runtime mode.
         * The inner loop walks through each ctlIndex entry in EEPROM.
         * The ctl value is encoded as [7:4] == test group, [3:0] == test mode.
         *
         */
        for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
                HAL_BOOL isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
                    (pCtlMode[ctlMode] == CTL_2GHT40);
                if (isHt40CtlMode) {
                        freq = centers.ctl_center;
                } else if (pCtlMode[ctlMode] & EXT_ADDITIVE) {
                        freq = centers.ext_center;
                } else {
                        freq = centers.ctl_center;
                }

                /* walk through each CTL index stored in EEPROM */
                for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
                        uint16_t twiceMinEdgePower;

                        /* compare test group from regulatory channel list with test mode from pCtlMode list */
                        if ((((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == pEepData->ctlIndex[i]) ||
                                (((cfgCtl & ~CTL_MODE_M) | (pCtlMode[ctlMode] & CTL_MODE_M)) == 
                                 ((pEepData->ctlIndex[i] & CTL_MODE_M) | SD_NO_CTL))) {
                                rep = &(pEepData->ctlData[i]);
                                twiceMinEdgePower = ar5416GetMaxEdgePower(freq,
                                                        rep->ctlEdges[owl_get_ntxchains(AH5416(ah)->ah_tx_chainmask) - 1],
                                                        IEEE80211_IS_CHAN_2GHZ(chan));
                                if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) {
                                        /* Find the minimum of all CTL edge powers that apply to this channel */
                                        twiceMaxEdgePower = AH_MIN(twiceMaxEdgePower, twiceMinEdgePower);
                                } else {
                                        /* specific */
                                        twiceMaxEdgePower = twiceMinEdgePower;
                                        break;
                                }
                        }
                }
                minCtlPower = (uint8_t)AH_MIN(twiceMaxEdgePower, scaledPower);
                /* Apply ctl mode to correct target power set */
                switch(pCtlMode[ctlMode]) {
                case CTL_11B:
                        for (i = 0; i < N(targetPowerCck.tPow2x); i++) {
                                targetPowerCck.tPow2x[i] = (uint8_t)AH_MIN(targetPowerCck.tPow2x[i], minCtlPower);
                        }
                        break;
                case CTL_11A:
                case CTL_11G:
                        for (i = 0; i < N(targetPowerOfdm.tPow2x); i++) {
                                targetPowerOfdm.tPow2x[i] = (uint8_t)AH_MIN(targetPowerOfdm.tPow2x[i], minCtlPower);
                        }
                        break;
                case CTL_5GHT20:
                case CTL_2GHT20:
                        for (i = 0; i < N(targetPowerHt20.tPow2x); i++) {
                                targetPowerHt20.tPow2x[i] = (uint8_t)AH_MIN(targetPowerHt20.tPow2x[i], minCtlPower);
                        }
                        break;
                case CTL_11B_EXT:
                        targetPowerCckExt.tPow2x[0] = (uint8_t)AH_MIN(targetPowerCckExt.tPow2x[0], minCtlPower);
                        break;
                case CTL_11A_EXT:
                case CTL_11G_EXT:
                        targetPowerOfdmExt.tPow2x[0] = (uint8_t)AH_MIN(targetPowerOfdmExt.tPow2x[0], minCtlPower);
                        break;
                case CTL_5GHT40:
                case CTL_2GHT40:
                        for (i = 0; i < N(targetPowerHt40.tPow2x); i++) {
                                targetPowerHt40.tPow2x[i] = (uint8_t)AH_MIN(targetPowerHt40.tPow2x[i], minCtlPower);
                        }
                        break;
                default:
                        return AH_FALSE;
                        break;
                }
        } /* end ctl mode checking */

        /* Set rates Array from collected data */
        ar5416SetRatesArrayFromTargetPower(ah, chan, ratesArray,
            &targetPowerCck,
            &targetPowerCckExt,
            &targetPowerOfdm,
            &targetPowerOfdmExt,
            &targetPowerHt20,
            &targetPowerHt40);
        return AH_TRUE;
#undef EXT_ADDITIVE
#undef CTL_11A_EXT
#undef CTL_11G_EXT
#undef CTL_11B_EXT
#undef SUB_NUM_CTL_MODES_AT_5G_40
#undef SUB_NUM_CTL_MODES_AT_2G_40
#undef N
}

/**************************************************************************
 * fbin2freq
 *
 * Get channel value from binary representation held in eeprom
 * RETURNS: the frequency in MHz
 */
static uint16_t
fbin2freq(uint8_t fbin, HAL_BOOL is2GHz)
{
    /*
     * Reserved value 0xFF provides an empty definition both as
     * an fbin and as a frequency - do not convert
     */
    if (fbin == AR5416_BCHAN_UNUSED) {
        return fbin;
    }

    return (uint16_t)((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
}

/*
 * ar5416GetMaxEdgePower
 *
 * Find the maximum conformance test limit for the given channel and CTL info
 */
uint16_t
ar5416GetMaxEdgePower(uint16_t freq, CAL_CTL_EDGES *pRdEdgesPower, HAL_BOOL is2GHz)
{
    uint16_t twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
    int      i;

    /* Get the edge power */
    for (i = 0; (i < AR5416_NUM_BAND_EDGES) && (pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED) ; i++) {
        /*
         * If there's an exact channel match or an inband flag set
         * on the lower channel use the given rdEdgePower
         */
        if (freq == fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) {
            twiceMaxEdgePower = MS(pRdEdgesPower[i].tPowerFlag, CAL_CTL_EDGES_POWER);
            break;
        } else if ((i > 0) && (freq < fbin2freq(pRdEdgesPower[i].bChannel, is2GHz))) {
            if (fbin2freq(pRdEdgesPower[i - 1].bChannel, is2GHz) < freq && (pRdEdgesPower[i - 1].tPowerFlag & CAL_CTL_EDGES_FLAG) != 0) {
                twiceMaxEdgePower = MS(pRdEdgesPower[i - 1].tPowerFlag, CAL_CTL_EDGES_POWER);
            }
            /* Leave loop - no more affecting edges possible in this monotonic increasing list */
            break;
        }
    }
    HALASSERT(twiceMaxEdgePower > 0);
    return twiceMaxEdgePower;
}

/**************************************************************
 * ar5416GetTargetPowers
 *
 * Return the rates of target power for the given target power table
 * channel, and number of channels
 */
void
ar5416GetTargetPowers(struct ath_hal *ah,  const struct ieee80211_channel *chan,
                      CAL_TARGET_POWER_HT *powInfo, uint16_t numChannels,
                      CAL_TARGET_POWER_HT *pNewPower, uint16_t numRates,
                      HAL_BOOL isHt40Target)
{
    uint16_t clo, chi;
    int i;
    int matchIndex = -1, lowIndex = -1;
    uint16_t freq;
    CHAN_CENTERS centers;

    ar5416GetChannelCenters(ah,  chan, &centers);
    freq = isHt40Target ? centers.synth_center : centers.ctl_center;

    /* Copy the target powers into the temp channel list */
    if (freq <= fbin2freq(powInfo[0].bChannel, IEEE80211_IS_CHAN_2GHZ(chan))) {
        matchIndex = 0;
    } else {
        for (i = 0; (i < numChannels) && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
            if (freq == fbin2freq(powInfo[i].bChannel, IEEE80211_IS_CHAN_2GHZ(chan))) {
                matchIndex = i;
                break;
            } else if ((freq < fbin2freq(powInfo[i].bChannel, IEEE80211_IS_CHAN_2GHZ(chan))) &&
                       (freq > fbin2freq(powInfo[i - 1].bChannel, IEEE80211_IS_CHAN_2GHZ(chan))))
            {
                lowIndex = i - 1;
                break;
            }
        }
        if ((matchIndex == -1) && (lowIndex == -1)) {
            HALASSERT(freq > fbin2freq(powInfo[i - 1].bChannel, IEEE80211_IS_CHAN_2GHZ(chan)));
            matchIndex = i - 1;
        }
    }

    if (matchIndex != -1) {
        OS_MEMCPY(pNewPower, &powInfo[matchIndex], sizeof(*pNewPower));
    } else {
        HALASSERT(lowIndex != -1);
        /*
         * Get the lower and upper channels, target powers,
         * and interpolate between them.
         */
        clo = fbin2freq(powInfo[lowIndex].bChannel, IEEE80211_IS_CHAN_2GHZ(chan));
        chi = fbin2freq(powInfo[lowIndex + 1].bChannel, IEEE80211_IS_CHAN_2GHZ(chan));

        for (i = 0; i < numRates; i++) {
            pNewPower->tPow2x[i] = (uint8_t)ath_ee_interpolate(freq, clo, chi,
                                   powInfo[lowIndex].tPow2x[i], powInfo[lowIndex + 1].tPow2x[i]);
        }
    }
}
/**************************************************************
 * ar5416GetTargetPowersLeg
 *
 * Return the four rates of target power for the given target power table
 * channel, and number of channels
 */
void
ar5416GetTargetPowersLeg(struct ath_hal *ah, 
                         const struct ieee80211_channel *chan,
                         CAL_TARGET_POWER_LEG *powInfo, uint16_t numChannels,
                         CAL_TARGET_POWER_LEG *pNewPower, uint16_t numRates,
                         HAL_BOOL isExtTarget)
{
    uint16_t clo, chi;
    int i;
    int matchIndex = -1, lowIndex = -1;
    uint16_t freq;
    CHAN_CENTERS centers;

    ar5416GetChannelCenters(ah,  chan, &centers);
    freq = (isExtTarget) ? centers.ext_center :centers.ctl_center;

    /* Copy the target powers into the temp channel list */
    if (freq <= fbin2freq(powInfo[0].bChannel, IEEE80211_IS_CHAN_2GHZ(chan))) {
        matchIndex = 0;
    } else {
        for (i = 0; (i < numChannels) && (powInfo[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
            if (freq == fbin2freq(powInfo[i].bChannel, IEEE80211_IS_CHAN_2GHZ(chan))) {
                matchIndex = i;
                break;
            } else if ((freq < fbin2freq(powInfo[i].bChannel, IEEE80211_IS_CHAN_2GHZ(chan))) &&
                       (freq > fbin2freq(powInfo[i - 1].bChannel, IEEE80211_IS_CHAN_2GHZ(chan))))
            {
                lowIndex = i - 1;
                break;
            }
        }
        if ((matchIndex == -1) && (lowIndex == -1)) {
            HALASSERT(freq > fbin2freq(powInfo[i - 1].bChannel, IEEE80211_IS_CHAN_2GHZ(chan)));
            matchIndex = i - 1;
        }
    }

    if (matchIndex != -1) {
        OS_MEMCPY(pNewPower, &powInfo[matchIndex], sizeof(*pNewPower));
    } else {
        HALASSERT(lowIndex != -1);
        /*
         * Get the lower and upper channels, target powers,
         * and interpolate between them.
         */
        clo = fbin2freq(powInfo[lowIndex].bChannel, IEEE80211_IS_CHAN_2GHZ(chan));
        chi = fbin2freq(powInfo[lowIndex + 1].bChannel, IEEE80211_IS_CHAN_2GHZ(chan));

        for (i = 0; i < numRates; i++) {
            pNewPower->tPow2x[i] = (uint8_t)ath_ee_interpolate(freq, clo, chi,
                                   powInfo[lowIndex].tPow2x[i], powInfo[lowIndex + 1].tPow2x[i]);
        }
    }
}

/*
 * Set the gain boundaries for the given radio chain.
 *
 * The gain boundaries tell the hardware at what point in the
 * PDADC array to "switch over" from one PD gain setting
 * to another. There's also a gain overlap between two
 * PDADC array gain curves where there's valid PD values
 * for 2 gain settings.
 *
 * The hardware uses the gain overlap and gain boundaries
 * to determine which gain curve to use for the given
 * target TX power.
 */
void
ar5416SetGainBoundariesClosedLoop(struct ath_hal *ah, int i,
    uint16_t pdGainOverlap_t2, uint16_t gainBoundaries[])
{
        int regChainOffset;

        regChainOffset = ar5416GetRegChainOffset(ah, i);

        HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: chain %d: gainOverlap_t2: %d,"
            " gainBoundaries: %d, %d, %d, %d\n", __func__, i, pdGainOverlap_t2,
            gainBoundaries[0], gainBoundaries[1], gainBoundaries[2],
            gainBoundaries[3]);
        OS_REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset,
            SM(pdGainOverlap_t2, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) |
            SM(gainBoundaries[0], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1)  |
            SM(gainBoundaries[1], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2)  |
            SM(gainBoundaries[2], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3)  |
            SM(gainBoundaries[3], AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
}

/*
 * Get the gain values and the number of gain levels given
 * in xpdMask.
 *
 * The EEPROM xpdMask determines which power detector gain
 * levels were used during calibration. Each of these mask
 * bits maps to a fixed gain level in hardware.
 */
uint16_t
ar5416GetXpdGainValues(struct ath_hal *ah, uint16_t xpdMask,
    uint16_t xpdGainValues[])
{
    int i;
    uint16_t numXpdGain = 0;

    for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) {
        if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) {
            if (numXpdGain >= AR5416_NUM_PD_GAINS) {
                HALASSERT(0);
                break;
            }
            xpdGainValues[numXpdGain] = (uint16_t)(AR5416_PD_GAINS_IN_MASK - i);
            numXpdGain++;
        }
    }
    return numXpdGain;
}

/*
 * Write the detector gain and biases.
 *
 * There are four power detector gain levels. The xpdMask in the EEPROM
 * determines which power detector gain levels have TX power calibration
 * data associated with them. This function writes the number of
 * PD gain levels and their values into the hardware.
 *
 * This is valid for all TX chains - the calibration data itself however
 * will likely differ per-chain.
 */
void
ar5416WriteDetectorGainBiases(struct ath_hal *ah, uint16_t numXpdGain,
    uint16_t xpdGainValues[])
{
    HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: numXpdGain: %d,"
      " xpdGainValues: %d, %d, %d\n", __func__, numXpdGain,
      xpdGainValues[0], xpdGainValues[1], xpdGainValues[2]);

    OS_REG_WRITE(ah, AR_PHY_TPCRG1, (OS_REG_READ(ah, AR_PHY_TPCRG1) & 
        ~(AR_PHY_TPCRG1_NUM_PD_GAIN | AR_PHY_TPCRG1_PD_GAIN_1 |
        AR_PHY_TPCRG1_PD_GAIN_2 | AR_PHY_TPCRG1_PD_GAIN_3)) | 
        SM(numXpdGain - 1, AR_PHY_TPCRG1_NUM_PD_GAIN) |
        SM(xpdGainValues[0], AR_PHY_TPCRG1_PD_GAIN_1 ) |
        SM(xpdGainValues[1], AR_PHY_TPCRG1_PD_GAIN_2) |
        SM(xpdGainValues[2],  AR_PHY_TPCRG1_PD_GAIN_3));
}

/*
 * Write the PDADC array to the given radio chain i.
 *
 * The 32 PDADC registers are written without any care about
 * their contents - so if various chips treat values as "special",
 * this routine will not care.
 */
void
ar5416WritePdadcValues(struct ath_hal *ah, int i, uint8_t pdadcValues[])
{
        int regOffset, regChainOffset;
        int j;
        int reg32;

        regChainOffset = ar5416GetRegChainOffset(ah, i);
        regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset;

        for (j = 0; j < 32; j++) {
                reg32 = ((pdadcValues[4*j + 0] & 0xFF) << 0)  |
                    ((pdadcValues[4*j + 1] & 0xFF) << 8)  |
                    ((pdadcValues[4*j + 2] & 0xFF) << 16) |
                    ((pdadcValues[4*j + 3] & 0xFF) << 24) ;
                OS_REG_WRITE(ah, regOffset, reg32);
                HALDEBUG(ah, HAL_DEBUG_EEPROM, "PDADC: Chain %d |"
                    " PDADC %3d Value %3d | PDADC %3d Value %3d | PDADC %3d"
                    " Value %3d | PDADC %3d Value %3d |\n",
                    i,
                    4*j, pdadcValues[4*j],
                    4*j+1, pdadcValues[4*j + 1],
                    4*j+2, pdadcValues[4*j + 2],
                    4*j+3, pdadcValues[4*j + 3]);
                regOffset += 4;
        }
}

/**************************************************************
 * ar5416SetPowerCalTable
 *
 * Pull the PDADC piers from cal data and interpolate them across the given
 * points as well as from the nearest pier(s) to get a power detector
 * linear voltage to power level table.
 */
HAL_BOOL
ar5416SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData,
        const struct ieee80211_channel *chan, int16_t *pTxPowerIndexOffset)
{
    CAL_DATA_PER_FREQ *pRawDataset;
    uint8_t  *pCalBChans = AH_NULL;
    uint16_t pdGainOverlap_t2;
    static uint8_t  pdadcValues[AR5416_NUM_PDADC_VALUES];
    uint16_t gainBoundaries[AR5416_PD_GAINS_IN_MASK];
    uint16_t numPiers, i;
    int16_t  tMinCalPower;
    uint16_t numXpdGain, xpdMask;
    uint16_t xpdGainValues[AR5416_NUM_PD_GAINS];
    uint32_t regChainOffset;

    OS_MEMZERO(xpdGainValues, sizeof(xpdGainValues));
    
    xpdMask = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].xpdGain;

    if (IS_EEP_MINOR_V2(ah)) {
        pdGainOverlap_t2 = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].pdGainOverlap;
    } else { 
        pdGainOverlap_t2 = (uint16_t)(MS(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
    }

    if (IEEE80211_IS_CHAN_2GHZ(chan)) {
        pCalBChans = pEepData->calFreqPier2G;
        numPiers = AR5416_NUM_2G_CAL_PIERS;
    } else {
        pCalBChans = pEepData->calFreqPier5G;
        numPiers = AR5416_NUM_5G_CAL_PIERS;
    }

    /* Calculate the value of xpdgains from the xpdGain Mask */
    numXpdGain = ar5416GetXpdGainValues(ah, xpdMask, xpdGainValues);
    
    /* Write the detector gain biases and their number */
    ar5416WriteDetectorGainBiases(ah, numXpdGain, xpdGainValues);

    for (i = 0; i < AR5416_MAX_CHAINS; i++) {
        regChainOffset = ar5416GetRegChainOffset(ah, i);

        if (pEepData->baseEepHeader.txMask & (1 << i)) {
            if (IEEE80211_IS_CHAN_2GHZ(chan)) {
                pRawDataset = pEepData->calPierData2G[i];
            } else {
                pRawDataset = pEepData->calPierData5G[i];
            }

            /* Fetch the gain boundaries and the PDADC values */
            ar5416GetGainBoundariesAndPdadcs(ah,  chan, pRawDataset,
                                             pCalBChans, numPiers,
                                             pdGainOverlap_t2,
                                             &tMinCalPower, gainBoundaries,
                                             pdadcValues, numXpdGain);

            if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) {
                ar5416SetGainBoundariesClosedLoop(ah, i, pdGainOverlap_t2,
                  gainBoundaries);
            }

            /* Write the power values into the baseband power table */
            ar5416WritePdadcValues(ah, i, pdadcValues);
        }
    }
    *pTxPowerIndexOffset = 0;

    return AH_TRUE;
}

/**************************************************************
 * ar5416GetGainBoundariesAndPdadcs
 *
 * Uses the data points read from EEPROM to reconstruct the pdadc power table
 * Called by ar5416SetPowerCalTable only.
 */
void
ar5416GetGainBoundariesAndPdadcs(struct ath_hal *ah, 
                                 const struct ieee80211_channel *chan,
                                 CAL_DATA_PER_FREQ *pRawDataSet,
                                 uint8_t * bChans,  uint16_t availPiers,
                                 uint16_t tPdGainOverlap, int16_t *pMinCalPower, uint16_t * pPdGainBoundaries,
                                 uint8_t * pPDADCValues, uint16_t numXpdGains)
{

    int       i, j, k;
    int16_t   ss;         /* potentially -ve index for taking care of pdGainOverlap */
    uint16_t  idxL, idxR, numPiers; /* Pier indexes */

    /* filled out Vpd table for all pdGains (chanL) */
    static uint8_t   vpdTableL[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB];

    /* filled out Vpd table for all pdGains (chanR) */
    static uint8_t   vpdTableR[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB];

    /* filled out Vpd table for all pdGains (interpolated) */
    static uint8_t   vpdTableI[AR5416_NUM_PD_GAINS][AR5416_MAX_PWR_RANGE_IN_HALF_DB];

    uint8_t   *pVpdL, *pVpdR, *pPwrL, *pPwrR;
    uint8_t   minPwrT4[AR5416_NUM_PD_GAINS];
    uint8_t   maxPwrT4[AR5416_NUM_PD_GAINS];
    int16_t   vpdStep;
    int16_t   tmpVal;
    uint16_t  sizeCurrVpdTable, maxIndex, tgtIndex;
    HAL_BOOL    match;
    int16_t  minDelta = 0;
    CHAN_CENTERS centers;

    ar5416GetChannelCenters(ah, chan, &centers);

    /* Trim numPiers for the number of populated channel Piers */
    for (numPiers = 0; numPiers < availPiers; numPiers++) {
        if (bChans[numPiers] == AR5416_BCHAN_UNUSED) {
            break;
        }
    }

    /* Find pier indexes around the current channel */
    match = ath_ee_getLowerUpperIndex((uint8_t)FREQ2FBIN(centers.synth_center,
        IEEE80211_IS_CHAN_2GHZ(chan)), bChans, numPiers, &idxL, &idxR);

    if (match) {
        /* Directly fill both vpd tables from the matching index */
        for (i = 0; i < numXpdGains; i++) {
            minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
            maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
            ath_ee_FillVpdTable(minPwrT4[i], maxPwrT4[i], pRawDataSet[idxL].pwrPdg[i],
                               pRawDataSet[idxL].vpdPdg[i], AR5416_PD_GAIN_ICEPTS, vpdTableI[i]);
        }
    } else {
        for (i = 0; i < numXpdGains; i++) {
            pVpdL = pRawDataSet[idxL].vpdPdg[i];
            pPwrL = pRawDataSet[idxL].pwrPdg[i];
            pVpdR = pRawDataSet[idxR].vpdPdg[i];
            pPwrR = pRawDataSet[idxR].pwrPdg[i];

            /* Start Vpd interpolation from the max of the minimum powers */
            minPwrT4[i] = AH_MAX(pPwrL[0], pPwrR[0]);

            /* End Vpd interpolation from the min of the max powers */
            maxPwrT4[i] = AH_MIN(pPwrL[AR5416_PD_GAIN_ICEPTS - 1], pPwrR[AR5416_PD_GAIN_ICEPTS - 1]);
            HALASSERT(maxPwrT4[i] > minPwrT4[i]);

            /* Fill pier Vpds */
            ath_ee_FillVpdTable(minPwrT4[i], maxPwrT4[i], pPwrL, pVpdL, AR5416_PD_GAIN_ICEPTS, vpdTableL[i]);
            ath_ee_FillVpdTable(minPwrT4[i], maxPwrT4[i], pPwrR, pVpdR, AR5416_PD_GAIN_ICEPTS, vpdTableR[i]);

            /* Interpolate the final vpd */
            for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
                vpdTableI[i][j] = (uint8_t)(ath_ee_interpolate((uint16_t)FREQ2FBIN(centers.synth_center,
                    IEEE80211_IS_CHAN_2GHZ(chan)),
                    bChans[idxL], bChans[idxR], vpdTableL[i][j], vpdTableR[i][j]));
            }
        }
    }
    *pMinCalPower = (int16_t)(minPwrT4[0] / 2);

    k = 0; /* index for the final table */
    for (i = 0; i < numXpdGains; i++) {
        if (i == (numXpdGains - 1)) {
            pPdGainBoundaries[i] = (uint16_t)(maxPwrT4[i] / 2);
        } else {
            pPdGainBoundaries[i] = (uint16_t)((maxPwrT4[i] + minPwrT4[i+1]) / 4);
        }

        pPdGainBoundaries[i] = (uint16_t)AH_MIN(AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]);

        /* NB: only applies to owl 1.0 */
        if ((i == 0) && !AR_SREV_5416_V20_OR_LATER(ah) ) {
            /*
             * fix the gain delta, but get a delta that can be applied to min to
             * keep the upper power values accurate, don't think max needs to
             * be adjusted because should not be at that area of the table?
             */
            minDelta = pPdGainBoundaries[0] - 23;
            pPdGainBoundaries[0] = 23;
        }
        else {
            minDelta = 0;
        }

        /* Find starting index for this pdGain */
        if (i == 0) {
            if (AR_SREV_MERLIN_10_OR_LATER(ah))
                ss = (int16_t)(0 - (minPwrT4[i] / 2));
            else
                ss = 0; /* for the first pdGain, start from index 0 */
        } else {
            /* need overlap entries extrapolated below. */
            ss = (int16_t)((pPdGainBoundaries[i-1] - (minPwrT4[i] / 2)) - tPdGainOverlap + 1 + minDelta);
        }
        vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
        vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
        /*
         *-ve ss indicates need to extrapolate data below for this pdGain
         */
        while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
            tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
            pPDADCValues[k++] = (uint8_t)((tmpVal < 0) ? 0 : tmpVal);
            ss++;
        }

        sizeCurrVpdTable = (uint8_t)((maxPwrT4[i] - minPwrT4[i]) / 2 +1);
        tgtIndex = (uint8_t)(pPdGainBoundaries[i] + tPdGainOverlap - (minPwrT4[i] / 2));
        maxIndex = (tgtIndex < sizeCurrVpdTable) ? tgtIndex : sizeCurrVpdTable;

        while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
            pPDADCValues[k++] = vpdTableI[i][ss++];
        }

        vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] - vpdTableI[i][sizeCurrVpdTable - 2]);
        vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
        /*
         * for last gain, pdGainBoundary == Pmax_t2, so will
         * have to extrapolate
         */
        if (tgtIndex >= maxIndex) {  /* need to extrapolate above */
            while ((ss <= tgtIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
                tmpVal = (int16_t)((vpdTableI[i][sizeCurrVpdTable - 1] +
                          (ss - maxIndex +1) * vpdStep));
                pPDADCValues[k++] = (uint8_t)((tmpVal > 255) ? 255 : tmpVal);
                ss++;
            }
        }               /* extrapolated above */
    }                   /* for all pdGainUsed */

    /* Fill out pdGainBoundaries - only up to 2 allowed here, but hardware allows up to 4 */
    while (i < AR5416_PD_GAINS_IN_MASK) {
        pPdGainBoundaries[i] = pPdGainBoundaries[i-1];
        i++;
    }

    while (k < AR5416_NUM_PDADC_VALUES) {
        pPDADCValues[k] = pPDADCValues[k-1];
        k++;
    }
    return;
}

/*
 * The linux ath9k driver and (from what I've been told) the reference
 * Atheros driver enables the 11n PHY by default whether or not it's
 * configured.
 */
static void
ar5416Set11nRegs(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
        uint32_t phymode;
        uint32_t enableDacFifo = 0;
        HAL_HT_MACMODE macmode;         /* MAC - 20/40 mode */

        if (AR_SREV_KITE_10_OR_LATER(ah))
                enableDacFifo = (OS_REG_READ(ah, AR_PHY_TURBO) & AR_PHY_FC_ENABLE_DAC_FIFO);

        /* Enable 11n HT, 20 MHz */
        phymode = AR_PHY_FC_HT_EN | AR_PHY_FC_SHORT_GI_40
                | AR_PHY_FC_SINGLE_HT_LTF1 | AR_PHY_FC_WALSH | enableDacFifo;

        /* Configure baseband for dynamic 20/40 operation */
        if (IEEE80211_IS_CHAN_HT40(chan)) {
                phymode |= AR_PHY_FC_DYN2040_EN;

                /* Configure control (primary) channel at +-10MHz */
                if (IEEE80211_IS_CHAN_HT40U(chan))
                        phymode |= AR_PHY_FC_DYN2040_PRI_CH;
#if 0
                /* Configure 20/25 spacing */
                if (ht->ht_extprotspacing == HAL_HT_EXTPROTSPACING_25)
                        phymode |= AR_PHY_FC_DYN2040_EXT_CH;
#endif
                macmode = HAL_HT_MACMODE_2040;
        } else
                macmode = HAL_HT_MACMODE_20;
        OS_REG_WRITE(ah, AR_PHY_TURBO, phymode);

        /* Configure MAC for 20/40 operation */
        ar5416Set11nMac2040(ah, macmode);

        /* global transmit timeout (25 TUs default)*/
        /* XXX - put this elsewhere??? */
        OS_REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S) ;

        /* carrier sense timeout */
        OS_REG_SET_BIT(ah, AR_GTTM, AR_GTTM_CST_USEC);
        OS_REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
}

void
ar5416GetChannelCenters(struct ath_hal *ah,
        const struct ieee80211_channel *chan, CHAN_CENTERS *centers)
{
        uint16_t freq = ath_hal_gethwchannel(ah, chan);

        centers->ctl_center = freq;
        centers->synth_center = freq;
        /*
         * In 20/40 phy mode, the center frequency is
         * "between" the control and extension channels.
         */
        if (IEEE80211_IS_CHAN_HT40U(chan)) {
                centers->synth_center += HT40_CHANNEL_CENTER_SHIFT;
                centers->ext_center =
                    centers->synth_center + HT40_CHANNEL_CENTER_SHIFT;
        } else if (IEEE80211_IS_CHAN_HT40D(chan)) {
                centers->synth_center -= HT40_CHANNEL_CENTER_SHIFT;
                centers->ext_center =
                    centers->synth_center - HT40_CHANNEL_CENTER_SHIFT;
        } else {
                centers->ext_center = freq;
        }
}

/*
 * Override the INI vals being programmed.
 */
static void
ar5416OverrideIni(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
        uint32_t val;

        /*
         * Set the RX_ABORT and RX_DIS and clear if off only after
         * RXE is set for MAC. This prevents frames with corrupted
         * descriptor status.
         */
        OS_REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));

        if (AR_SREV_MERLIN_10_OR_LATER(ah)) {
                val = OS_REG_READ(ah, AR_PCU_MISC_MODE2);
                val &= (~AR_PCU_MISC_MODE2_ADHOC_MCAST_KEYID_ENABLE);
                if (!AR_SREV_9271(ah))
                        val &= ~AR_PCU_MISC_MODE2_HWWAR1;

                if (AR_SREV_KIWI_10_OR_LATER(ah))
                        val = val & (~AR_PCU_MISC_MODE2_HWWAR2);

                OS_REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
        }

        /*
         * Disable RIFS search on some chips to avoid baseband
         * hang issues.
         */
        if (AR_SREV_HOWL(ah) || AR_SREV_SOWL(ah))
                (void) ar5416SetRifsDelay(ah, chan, AH_FALSE);

        if (!AR_SREV_5416_V20_OR_LATER(ah) || AR_SREV_MERLIN(ah))
                return;

        /*
         * Disable BB clock gating
         * Necessary to avoid issues on AR5416 2.0
         */
        OS_REG_WRITE(ah, 0x9800 + (651 << 2), 0x11);
}

struct ini {
        uint32_t        *data;          /* NB: !const */
        int             rows, cols;
};

/*
 * Override XPA bias level based on operating frequency.
 * This is a v14 EEPROM specific thing for the AR9160.
 */
void
ar5416EepromSetAddac(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
#define XPA_LVL_FREQ(cnt)       (pModal->xpaBiasLvlFreq[cnt])
        MODAL_EEP_HEADER        *pModal;
        HAL_EEPROM_v14 *ee = AH_PRIVATE(ah)->ah_eeprom;
        struct ar5416eeprom     *eep = &ee->ee_base;
        uint8_t biaslevel;

        if (! AR_SREV_SOWL(ah))
                return;

        if (EEP_MINOR(ah) < AR5416_EEP_MINOR_VER_7)
                return;

        pModal = &(eep->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)]);

        if (pModal->xpaBiasLvl != 0xff)
                biaslevel = pModal->xpaBiasLvl;
        else {
                uint16_t resetFreqBin, freqBin, freqCount = 0;
                CHAN_CENTERS centers;

                ar5416GetChannelCenters(ah, chan, &centers);

                resetFreqBin = FREQ2FBIN(centers.synth_center, IEEE80211_IS_CHAN_2GHZ(chan));
                freqBin = XPA_LVL_FREQ(0) & 0xff;
                biaslevel = (uint8_t) (XPA_LVL_FREQ(0) >> 14);

                freqCount++;

                while (freqCount < 3) {
                        if (XPA_LVL_FREQ(freqCount) == 0x0)
                        break;

                        freqBin = XPA_LVL_FREQ(freqCount) & 0xff;
                        if (resetFreqBin >= freqBin)
                                biaslevel = (uint8_t)(XPA_LVL_FREQ(freqCount) >> 14);
                        else
                                break;
                        freqCount++;
                }
        }

        HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: overriding XPA bias level = %d\n",
            __func__, biaslevel);

        /*
         * This is a dirty workaround for the const initval data,
         * which will upset multiple AR9160's on the same board.
         *
         * The HAL should likely just have a private copy of the addac
         * data per instance.
         */
        if (IEEE80211_IS_CHAN_2GHZ(chan))
                HAL_INI_VAL((struct ini *) &AH5416(ah)->ah_ini_addac, 7, 1) =
                    (HAL_INI_VAL(&AH5416(ah)->ah_ini_addac, 7, 1) & (~0x18)) | biaslevel << 3;
        else
                HAL_INI_VAL((struct ini *) &AH5416(ah)->ah_ini_addac, 6, 1) =
                    (HAL_INI_VAL(&AH5416(ah)->ah_ini_addac, 6, 1) & (~0xc0)) | biaslevel << 6;
#undef XPA_LVL_FREQ
}

static void
ar5416MarkPhyInactive(struct ath_hal *ah)
{
        OS_REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
}

#define AR5416_IFS_SLOT_FULL_RATE_40    0x168   /* 9 us half, 40 MHz core clock (9*40) */
#define AR5416_IFS_SLOT_HALF_RATE_40    0x104   /* 13 us half, 20 MHz core clock (13*20) */
#define AR5416_IFS_SLOT_QUARTER_RATE_40 0xD2    /* 21 us quarter, 10 MHz core clock (21*10) */

#define AR5416_IFS_EIFS_FULL_RATE_40    0xE60   /* (74 + (2 * 9)) * 40MHz core clock */
#define AR5416_IFS_EIFS_HALF_RATE_40    0xDAC   /* (149 + (2 * 13)) * 20MHz core clock */
#define AR5416_IFS_EIFS_QUARTER_RATE_40 0xD48   /* (298 + (2 * 21)) * 10MHz core clock */

#define AR5416_IFS_SLOT_FULL_RATE_44    0x18c   /* 9 us half, 44 MHz core clock (9*44) */
#define AR5416_IFS_SLOT_HALF_RATE_44    0x11e   /* 13 us half, 22 MHz core clock (13*22) */
#define AR5416_IFS_SLOT_QUARTER_RATE_44 0xe7    /* 21 us quarter, 11 MHz core clock (21*11) */

#define AR5416_IFS_EIFS_FULL_RATE_44    0xfd0   /* (74 + (2 * 9)) * 44MHz core clock */
#define AR5416_IFS_EIFS_HALF_RATE_44    0xf0a   /* (149 + (2 * 13)) * 22MHz core clock */
#define AR5416_IFS_EIFS_QUARTER_RATE_44 0xe9c   /* (298 + (2 * 21)) * 11MHz core clock */

#define AR5416_INIT_USEC_40             40
#define AR5416_HALF_RATE_USEC_40        19 /* ((40 / 2) - 1 ) */
#define AR5416_QUARTER_RATE_USEC_40     9  /* ((40 / 4) - 1 ) */

#define AR5416_INIT_USEC_44             44
#define AR5416_HALF_RATE_USEC_44        21 /* ((44 / 2) - 1 ) */
#define AR5416_QUARTER_RATE_USEC_44     10  /* ((44 / 4) - 1 ) */

/* XXX What should these be for 40/44MHz clocks (and half/quarter) ? */
#define AR5416_RX_NON_FULL_RATE_LATENCY         63
#define AR5416_TX_HALF_RATE_LATENCY             108
#define AR5416_TX_QUARTER_RATE_LATENCY          216

/*
 * Adjust various register settings based on half/quarter rate clock setting.
 * This includes:
 *
 * + USEC, TX/RX latency,
 * + IFS params: slot, eifs, misc etc.
 *
 * TODO:
 *
 * + Verify which other registers need to be tweaked;
 * + Verify the behaviour of this for 5GHz fast and non-fast clock mode;
 * + This just plain won't work for long distance links - the coverage class
 *   code isn't aware of the slot/ifs/ACK/RTS timeout values that need to
 *   change;
 * + Verify whether the 32KHz USEC value needs to be kept for the 802.11n
 *   series chips?
 * + Calculate/derive values for 2GHz, 5GHz, 5GHz fast clock
 */
static void
ar5416SetIFSTiming(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
        uint32_t txLat, rxLat, usec, slot, refClock, eifs, init_usec;
        int clk_44 = 0;

        HALASSERT(IEEE80211_IS_CHAN_HALF(chan) ||
            IEEE80211_IS_CHAN_QUARTER(chan));

        /* 2GHz and 5GHz fast clock - 44MHz; else 40MHz */
        if (IEEE80211_IS_CHAN_2GHZ(chan))
                clk_44 = 1;
        else if (IEEE80211_IS_CHAN_5GHZ(chan) &&
            IS_5GHZ_FAST_CLOCK_EN(ah, chan))
                clk_44 = 1;

        /* XXX does this need save/restoring for the 11n chips? */
        /*
         * XXX TODO: should mask out the txlat/rxlat/usec values?
         */
        refClock = OS_REG_READ(ah, AR_USEC) & AR_USEC_USEC32;

        /*
         * XXX This really should calculate things, not use
         * hard coded values! Ew.
         */
        if (IEEE80211_IS_CHAN_HALF(chan)) {
                if (clk_44) {
                        slot = AR5416_IFS_SLOT_HALF_RATE_44;
                        rxLat = AR5416_RX_NON_FULL_RATE_LATENCY <<
                            AR5416_USEC_RX_LAT_S;
                        txLat = AR5416_TX_HALF_RATE_LATENCY <<
                            AR5416_USEC_TX_LAT_S;
                        usec = AR5416_HALF_RATE_USEC_44;
                        eifs = AR5416_IFS_EIFS_HALF_RATE_44;
                        init_usec = AR5416_INIT_USEC_44 >> 1;
                } else {
                        slot = AR5416_IFS_SLOT_HALF_RATE_40;
                        rxLat = AR5416_RX_NON_FULL_RATE_LATENCY <<
                            AR5416_USEC_RX_LAT_S;
                        txLat = AR5416_TX_HALF_RATE_LATENCY <<
                            AR5416_USEC_TX_LAT_S;
                        usec = AR5416_HALF_RATE_USEC_40;
                        eifs = AR5416_IFS_EIFS_HALF_RATE_40;
                        init_usec = AR5416_INIT_USEC_40 >> 1;
                }
        } else { /* quarter rate */
                if (clk_44) {
                        slot = AR5416_IFS_SLOT_QUARTER_RATE_44;
                        rxLat = AR5416_RX_NON_FULL_RATE_LATENCY <<
                            AR5416_USEC_RX_LAT_S;
                        txLat = AR5416_TX_QUARTER_RATE_LATENCY <<
                            AR5416_USEC_TX_LAT_S;
                        usec = AR5416_QUARTER_RATE_USEC_44;
                        eifs = AR5416_IFS_EIFS_QUARTER_RATE_44;
                        init_usec = AR5416_INIT_USEC_44 >> 2;
                } else {
                        slot = AR5416_IFS_SLOT_QUARTER_RATE_40;
                        rxLat = AR5416_RX_NON_FULL_RATE_LATENCY <<
                            AR5416_USEC_RX_LAT_S;
                        txLat = AR5416_TX_QUARTER_RATE_LATENCY <<
                            AR5416_USEC_TX_LAT_S;
                        usec = AR5416_QUARTER_RATE_USEC_40;
                        eifs = AR5416_IFS_EIFS_QUARTER_RATE_40;
                        init_usec = AR5416_INIT_USEC_40 >> 2;
                }
        }

        /* XXX verify these! */
        OS_REG_WRITE(ah, AR_USEC, (usec | refClock | txLat | rxLat));
        OS_REG_WRITE(ah, AR_D_GBL_IFS_SLOT, slot);
        OS_REG_WRITE(ah, AR_D_GBL_IFS_EIFS, eifs);
        OS_REG_RMW_FIELD(ah, AR_D_GBL_IFS_MISC,
            AR_D_GBL_IFS_MISC_USEC_DURATION, init_usec);
}