/*
 * Copyright (c) 2006-2008 Intel Corporation
 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
 *
 * DRM core CRTC related functions
 *
 * Permission to use, copy, modify, distribute, and sell this software and its
 * documentation for any purpose is hereby granted without fee, provided that
 * the above copyright notice appear in all copies and that both that copyright
 * notice and this permission notice appear in supporting documentation, and
 * that the name of the copyright holders not be used in advertising or
 * publicity pertaining to distribution of the software without specific,
 * written prior permission.  The copyright holders make no representations
 * about the suitability of this software for any purpose.  It is provided "as
 * is" without express or implied warranty.
 *
 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
 * OF THIS SOFTWARE.
 *
 * Authors:
 *      Keith Packard
 *      Eric Anholt <eric@anholt.net>
 *      Dave Airlie <airlied@linux.ie>
 *      Jesse Barnes <jesse.barnes@intel.com>
 */

#include <sys/cdefs.h>
#include <dev/drm2/drmP.h>
#include <dev/drm2/drm_crtc.h>
#include <dev/drm2/drm_fourcc.h>
#include <dev/drm2/drm_crtc_helper.h>
#include <dev/drm2/drm_fb_helper.h>
#include <dev/drm2/drm_edid.h>

/**
 * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
 *                                              connector list
 * @dev: drm device to operate on
 *
 * Some userspace presumes that the first connected connector is the main
 * display, where it's supposed to display e.g. the login screen. For
 * laptops, this should be the main panel. Use this function to sort all
 * (eDP/LVDS) panels to the front of the connector list, instead of
 * painstakingly trying to initialize them in the right order.
 */
void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
{
        struct drm_connector *connector, *tmp;
        struct list_head panel_list;

        INIT_LIST_HEAD(&panel_list);

        list_for_each_entry_safe(connector, tmp,
                                 &dev->mode_config.connector_list, head) {
                if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
                    connector->connector_type == DRM_MODE_CONNECTOR_eDP)
                        list_move_tail(&connector->head, &panel_list);
        }

        list_splice(&panel_list, &dev->mode_config.connector_list);
}
EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);

static bool drm_kms_helper_poll = true;
module_param_named(poll, drm_kms_helper_poll, bool, 0600);

static void drm_mode_validate_flag(struct drm_connector *connector,
                                   int flags)
{
        struct drm_display_mode *mode;

        if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE))
                return;

        list_for_each_entry(mode, &connector->modes, head) {
                if ((mode->flags & DRM_MODE_FLAG_INTERLACE) &&
                                !(flags & DRM_MODE_FLAG_INTERLACE))
                        mode->status = MODE_NO_INTERLACE;
                if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) &&
                                !(flags & DRM_MODE_FLAG_DBLSCAN))
                        mode->status = MODE_NO_DBLESCAN;
        }

        return;
}

/**
 * drm_helper_probe_single_connector_modes - get complete set of display modes
 * @connector: connector to probe
 * @maxX: max width for modes
 * @maxY: max height for modes
 *
 * LOCKING:
 * Caller must hold mode config lock.
 *
 * Based on the helper callbacks implemented by @connector try to detect all
 * valid modes.  Modes will first be added to the connector's probed_modes list,
 * then culled (based on validity and the @maxX, @maxY parameters) and put into
 * the normal modes list.
 *
 * Intended to be use as a generic implementation of the ->probe() @connector
 * callback for drivers that use the crtc helpers for output mode filtering and
 * detection.
 *
 * RETURNS:
 * Number of modes found on @connector.
 */
int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
                                            uint32_t maxX, uint32_t maxY)
{
        struct drm_device *dev = connector->dev;
        struct drm_display_mode *mode;
        struct drm_connector_helper_funcs *connector_funcs =
                connector->helper_private;
        int count = 0;
        int mode_flags = 0;

        DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
                        drm_get_connector_name(connector));
        /* set all modes to the unverified state */
        list_for_each_entry(mode, &connector->modes, head)
                mode->status = MODE_UNVERIFIED;

        if (connector->force) {
                if (connector->force == DRM_FORCE_ON)
                        connector->status = connector_status_connected;
                else
                        connector->status = connector_status_disconnected;
                if (connector->funcs->force)
                        connector->funcs->force(connector);
        } else {
                connector->status = connector->funcs->detect(connector, true);
        }

        /* Re-enable polling in case the global poll config changed. */
        if (drm_kms_helper_poll != dev->mode_config.poll_running)
                drm_kms_helper_poll_enable(dev);

        dev->mode_config.poll_running = drm_kms_helper_poll;

        if (connector->status == connector_status_disconnected) {
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
                        connector->base.id, drm_get_connector_name(connector));
                drm_mode_connector_update_edid_property(connector, NULL);
                goto prune;
        }

#ifdef FREEBSD_NOTYET
#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
        count = drm_load_edid_firmware(connector);
        if (count == 0)
#endif
#endif /* FREEBSD_NOTYET */
                count = (*connector_funcs->get_modes)(connector);

        if (count == 0 && connector->status == connector_status_connected)
                count = drm_add_modes_noedid(connector, 1024, 768);
        if (count == 0)
                goto prune;

        drm_mode_connector_list_update(connector);

        if (maxX && maxY)
                drm_mode_validate_size(dev, &connector->modes, maxX,
                                       maxY, 0);

        if (connector->interlace_allowed)
                mode_flags |= DRM_MODE_FLAG_INTERLACE;
        if (connector->doublescan_allowed)
                mode_flags |= DRM_MODE_FLAG_DBLSCAN;
        drm_mode_validate_flag(connector, mode_flags);

        list_for_each_entry(mode, &connector->modes, head) {
                if (mode->status == MODE_OK)
                        mode->status = connector_funcs->mode_valid(connector,
                                                                   mode);
        }

prune:
        drm_mode_prune_invalid(dev, &connector->modes, true);

        if (list_empty(&connector->modes))
                return 0;

        list_for_each_entry(mode, &connector->modes, head)
                mode->vrefresh = drm_mode_vrefresh(mode);

        drm_mode_sort(&connector->modes);

        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id,
                        drm_get_connector_name(connector));
        list_for_each_entry(mode, &connector->modes, head) {
                drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
                drm_mode_debug_printmodeline(mode);
        }

        return count;
}
EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);

/**
 * drm_helper_encoder_in_use - check if a given encoder is in use
 * @encoder: encoder to check
 *
 * LOCKING:
 * Caller must hold mode config lock.
 *
 * Walk @encoders's DRM device's mode_config and see if it's in use.
 *
 * RETURNS:
 * True if @encoder is part of the mode_config, false otherwise.
 */
bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
{
        struct drm_connector *connector;
        struct drm_device *dev = encoder->dev;
        list_for_each_entry(connector, &dev->mode_config.connector_list, head)
                if (connector->encoder == encoder)
                        return true;
        return false;
}
EXPORT_SYMBOL(drm_helper_encoder_in_use);

/**
 * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
 * @crtc: CRTC to check
 *
 * LOCKING:
 * Caller must hold mode config lock.
 *
 * Walk @crtc's DRM device's mode_config and see if it's in use.
 *
 * RETURNS:
 * True if @crtc is part of the mode_config, false otherwise.
 */
bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
{
        struct drm_encoder *encoder;
        struct drm_device *dev = crtc->dev;
        /* FIXME: Locking around list access? */
        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
                if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
                        return true;
        return false;
}
EXPORT_SYMBOL(drm_helper_crtc_in_use);

static void
drm_encoder_disable(struct drm_encoder *encoder)
{
        struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;

        if (encoder_funcs->disable)
                (*encoder_funcs->disable)(encoder);
        else
                (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
}

/**
 * drm_helper_disable_unused_functions - disable unused objects
 * @dev: DRM device
 *
 * LOCKING:
 * Caller must hold mode config lock.
 *
 * If an connector or CRTC isn't part of @dev's mode_config, it can be disabled
 * by calling its dpms function, which should power it off.
 */
void drm_helper_disable_unused_functions(struct drm_device *dev)
{
        struct drm_encoder *encoder;
        struct drm_connector *connector;
        struct drm_crtc *crtc;

        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                if (!connector->encoder)
                        continue;
                if (connector->status == connector_status_disconnected)
                        connector->encoder = NULL;
        }

        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
                if (!drm_helper_encoder_in_use(encoder)) {
                        drm_encoder_disable(encoder);
                        /* disconnector encoder from any connector */
                        encoder->crtc = NULL;
                }
        }

        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
                struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
                crtc->enabled = drm_helper_crtc_in_use(crtc);
                if (!crtc->enabled) {
                        if (crtc_funcs->disable)
                                (*crtc_funcs->disable)(crtc);
                        else
                                (*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF);
                        crtc->fb = NULL;
                }
        }
}
EXPORT_SYMBOL(drm_helper_disable_unused_functions);

/**
 * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
 * @encoder: encoder to test
 * @crtc: crtc to test
 *
 * Return false if @encoder can't be driven by @crtc, true otherwise.
 */
static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
                                struct drm_crtc *crtc)
{
        struct drm_device *dev;
        struct drm_crtc *tmp;
        int crtc_mask = 1;

        if (crtc == NULL)
                printf("checking null crtc?\n");

        dev = crtc->dev;

        list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
                if (tmp == crtc)
                        break;
                crtc_mask <<= 1;
        }

        if (encoder->possible_crtcs & crtc_mask)
                return true;
        return false;
}

/*
 * Check the CRTC we're going to map each output to vs. its current
 * CRTC.  If they don't match, we have to disable the output and the CRTC
 * since the driver will have to re-route things.
 */
static void
drm_crtc_prepare_encoders(struct drm_device *dev)
{
        struct drm_encoder_helper_funcs *encoder_funcs;
        struct drm_encoder *encoder;

        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
                encoder_funcs = encoder->helper_private;
                /* Disable unused encoders */
                if (encoder->crtc == NULL)
                        drm_encoder_disable(encoder);
                /* Disable encoders whose CRTC is about to change */
                if (encoder_funcs->get_crtc &&
                    encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
                        drm_encoder_disable(encoder);
        }
}

/**
 * drm_crtc_helper_set_mode - internal helper to set a mode
 * @crtc: CRTC to program
 * @mode: mode to use
 * @x: horizontal offset into the surface
 * @y: vertical offset into the surface
 * @old_fb: old framebuffer, for cleanup
 *
 * LOCKING:
 * Caller must hold mode config lock.
 *
 * Try to set @mode on @crtc.  Give @crtc and its associated connectors a chance
 * to fixup or reject the mode prior to trying to set it. This is an internal
 * helper that drivers could e.g. use to update properties that require the
 * entire output pipe to be disabled and re-enabled in a new configuration. For
 * example for changing whether audio is enabled on a hdmi link or for changing
 * panel fitter or dither attributes. It is also called by the
 * drm_crtc_helper_set_config() helper function to drive the mode setting
 * sequence.
 *
 * RETURNS:
 * True if the mode was set successfully, or false otherwise.
 */
bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
                              struct drm_display_mode *mode,
                              int x, int y,
                              struct drm_framebuffer *old_fb)
{
        struct drm_device *dev = crtc->dev;
        struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode;
        struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
        struct drm_encoder_helper_funcs *encoder_funcs;
        int saved_x, saved_y;
        struct drm_encoder *encoder;
        bool ret = true;

        crtc->enabled = drm_helper_crtc_in_use(crtc);
        if (!crtc->enabled)
                return true;

        adjusted_mode = drm_mode_duplicate(dev, mode);
        if (!adjusted_mode)
                return false;

        saved_hwmode = crtc->hwmode;
        saved_mode = crtc->mode;
        saved_x = crtc->x;
        saved_y = crtc->y;

        /* Update crtc values up front so the driver can rely on them for mode
         * setting.
         */
        crtc->mode = *mode;
        crtc->x = x;
        crtc->y = y;

        /* Pass our mode to the connectors and the CRTC to give them a chance to
         * adjust it according to limitations or connector properties, and also
         * a chance to reject the mode entirely.
         */
        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {

                if (encoder->crtc != crtc)
                        continue;
                encoder_funcs = encoder->helper_private;
                if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
                                                      adjusted_mode))) {
                        DRM_DEBUG_KMS("Encoder fixup failed\n");
                        goto done;
                }
        }

        if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
                DRM_DEBUG_KMS("CRTC fixup failed\n");
                goto done;
        }
        DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);

        /* Prepare the encoders and CRTCs before setting the mode. */
        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {

                if (encoder->crtc != crtc)
                        continue;
                encoder_funcs = encoder->helper_private;
                /* Disable the encoders as the first thing we do. */
                encoder_funcs->prepare(encoder);
        }

        drm_crtc_prepare_encoders(dev);

        crtc_funcs->prepare(crtc);

        /* Set up the DPLL and any encoders state that needs to adjust or depend
         * on the DPLL.
         */
        ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
        if (!ret)
            goto done;

        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {

                if (encoder->crtc != crtc)
                        continue;

                DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
                        encoder->base.id, drm_get_encoder_name(encoder),
                        mode->base.id, mode->name);
                encoder_funcs = encoder->helper_private;
                encoder_funcs->mode_set(encoder, mode, adjusted_mode);
        }

        /* Now enable the clocks, plane, pipe, and connectors that we set up. */
        crtc_funcs->commit(crtc);

        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {

                if (encoder->crtc != crtc)
                        continue;

                encoder_funcs = encoder->helper_private;
                encoder_funcs->commit(encoder);

        }

        /* Store real post-adjustment hardware mode. */
        crtc->hwmode = *adjusted_mode;

        /* Calculate and store various constants which
         * are later needed by vblank and swap-completion
         * timestamping. They are derived from true hwmode.
         */
        drm_calc_timestamping_constants(crtc);

        /* FIXME: add subpixel order */
done:
        drm_mode_destroy(dev, adjusted_mode);
        if (!ret) {
                crtc->hwmode = saved_hwmode;
                crtc->mode = saved_mode;
                crtc->x = saved_x;
                crtc->y = saved_y;
        }

        return ret;
}
EXPORT_SYMBOL(drm_crtc_helper_set_mode);


static int
drm_crtc_helper_disable(struct drm_crtc *crtc)
{
        struct drm_device *dev = crtc->dev;
        struct drm_connector *connector;
        struct drm_encoder *encoder;

        /* Decouple all encoders and their attached connectors from this crtc */
        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
                if (encoder->crtc != crtc)
                        continue;

                list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                        if (connector->encoder != encoder)
                                continue;

                        connector->encoder = NULL;
                }
        }

        drm_helper_disable_unused_functions(dev);
        return 0;
}

/**
 * drm_crtc_helper_set_config - set a new config from userspace
 * @set: mode set configuration
 *
 * LOCKING:
 * Caller must hold mode config lock.
 *
 * Setup a new configuration, provided by the upper layers (either an ioctl call
 * from userspace or internally e.g. from the fbdev suppport code) in @set, and
 * enable it. This is the main helper functions for drivers that implement
 * kernel mode setting with the crtc helper functions and the assorted
 * ->prepare(), ->modeset() and ->commit() helper callbacks.
 *
 * RETURNS:
 * Returns 0 on success, -ERRNO on failure.
 */
int drm_crtc_helper_set_config(struct drm_mode_set *set)
{
        struct drm_device *dev;
        struct drm_crtc *save_crtcs, *new_crtc, *crtc;
        struct drm_encoder *save_encoders, *new_encoder, *encoder;
        struct drm_framebuffer *old_fb = NULL;
        bool mode_changed = false; /* if true do a full mode set */
        bool fb_changed = false; /* if true and !mode_changed just do a flip */
        struct drm_connector *save_connectors, *connector;
        int count = 0, ro, fail = 0;
        struct drm_crtc_helper_funcs *crtc_funcs;
        struct drm_mode_set save_set;
        int ret;
        int i;

        DRM_DEBUG_KMS("\n");

        if (!set)
                return -EINVAL;

        if (!set->crtc)
                return -EINVAL;

        if (!set->crtc->helper_private)
                return -EINVAL;

        crtc_funcs = set->crtc->helper_private;

        if (!set->mode)
                set->fb = NULL;

        if (set->fb) {
                DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
                                set->crtc->base.id, set->fb->base.id,
                                (int)set->num_connectors, set->x, set->y);
        } else {
                DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
                return drm_crtc_helper_disable(set->crtc);
        }

        dev = set->crtc->dev;

        /* Allocate space for the backup of all (non-pointer) crtc, encoder and
         * connector data. */
        save_crtcs = malloc(dev->mode_config.num_crtc *
                             sizeof(struct drm_crtc), DRM_MEM_KMS, M_NOWAIT | M_ZERO);
        if (!save_crtcs)
                return -ENOMEM;

        save_encoders = malloc(dev->mode_config.num_encoder *
                                sizeof(struct drm_encoder), DRM_MEM_KMS, M_NOWAIT | M_ZERO);
        if (!save_encoders) {
                free(save_crtcs, DRM_MEM_KMS);
                return -ENOMEM;
        }

        save_connectors = malloc(dev->mode_config.num_connector *
                                sizeof(struct drm_connector), DRM_MEM_KMS, M_NOWAIT | M_ZERO);
        if (!save_connectors) {
                free(save_crtcs, DRM_MEM_KMS);
                free(save_encoders, DRM_MEM_KMS);
                return -ENOMEM;
        }

        /* Copy data. Note that driver private data is not affected.
         * Should anything bad happen only the expected state is
         * restored, not the drivers personal bookkeeping.
         */
        count = 0;
        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
                save_crtcs[count++] = *crtc;
        }

        count = 0;
        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
                save_encoders[count++] = *encoder;
        }

        count = 0;
        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                save_connectors[count++] = *connector;
        }

        save_set.crtc = set->crtc;
        save_set.mode = &set->crtc->mode;
        save_set.x = set->crtc->x;
        save_set.y = set->crtc->y;
        save_set.fb = set->crtc->fb;

        /* We should be able to check here if the fb has the same properties
         * and then just flip_or_move it */
        if (set->crtc->fb != set->fb) {
                /* If we have no fb then treat it as a full mode set */
                if (set->crtc->fb == NULL) {
                        DRM_DEBUG_KMS("crtc has no fb, full mode set\n");
                        mode_changed = true;
                } else if (set->fb == NULL) {
                        mode_changed = true;
                } else if (set->fb->depth != set->crtc->fb->depth) {
                        mode_changed = true;
                } else if (set->fb->bits_per_pixel !=
                           set->crtc->fb->bits_per_pixel) {
                        mode_changed = true;
                } else
                        fb_changed = true;
        }

        if (set->x != set->crtc->x || set->y != set->crtc->y)
                fb_changed = true;

        if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
                DRM_DEBUG_KMS("modes are different, full mode set\n");
                drm_mode_debug_printmodeline(&set->crtc->mode);
                drm_mode_debug_printmodeline(set->mode);
                mode_changed = true;
        }

        /* a) traverse passed in connector list and get encoders for them */
        count = 0;
        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                struct drm_connector_helper_funcs *connector_funcs =
                        connector->helper_private;
                new_encoder = connector->encoder;
                for (ro = 0; ro < set->num_connectors; ro++) {
                        if (set->connectors[ro] == connector) {
                                new_encoder = connector_funcs->best_encoder(connector);
                                /* if we can't get an encoder for a connector
                                   we are setting now - then fail */
                                if (new_encoder == NULL)
                                        /* don't break so fail path works correct */
                                        fail = 1;
                                break;
                        }
                }

                if (new_encoder != connector->encoder) {
                        DRM_DEBUG_KMS("encoder changed, full mode switch\n");
                        mode_changed = true;
                        /* If the encoder is reused for another connector, then
                         * the appropriate crtc will be set later.
                         */
                        if (connector->encoder)
                                connector->encoder->crtc = NULL;
                        connector->encoder = new_encoder;
                }
        }

        if (fail) {
                ret = -EINVAL;
                goto fail;
        }

        count = 0;
        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                if (!connector->encoder)
                        continue;

                if (connector->encoder->crtc == set->crtc)
                        new_crtc = NULL;
                else
                        new_crtc = connector->encoder->crtc;

                for (ro = 0; ro < set->num_connectors; ro++) {
                        if (set->connectors[ro] == connector)
                                new_crtc = set->crtc;
                }

                /* Make sure the new CRTC will work with the encoder */
                if (new_crtc &&
                    !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
                        ret = -EINVAL;
                        goto fail;
                }
                if (new_crtc != connector->encoder->crtc) {
                        DRM_DEBUG_KMS("crtc changed, full mode switch\n");
                        mode_changed = true;
                        connector->encoder->crtc = new_crtc;
                }
                if (new_crtc) {
                        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
                                connector->base.id, drm_get_connector_name(connector),
                                new_crtc->base.id);
                } else {
                        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
                                connector->base.id, drm_get_connector_name(connector));
                }
        }

        /* mode_set_base is not a required function */
        if (fb_changed && !crtc_funcs->mode_set_base)
                mode_changed = true;

        if (mode_changed) {
                set->crtc->enabled = drm_helper_crtc_in_use(set->crtc);
                if (set->crtc->enabled) {
                        DRM_DEBUG_KMS("attempting to set mode from"
                                        " userspace\n");
                        drm_mode_debug_printmodeline(set->mode);
                        old_fb = set->crtc->fb;
                        set->crtc->fb = set->fb;
                        if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
                                                      set->x, set->y,
                                                      old_fb)) {
                                DRM_ERROR("failed to set mode on [CRTC:%d]\n",
                                          set->crtc->base.id);
                                set->crtc->fb = old_fb;
                                ret = -EINVAL;
                                goto fail;
                        }
                        DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
                        for (i = 0; i < set->num_connectors; i++) {
                                DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
                                              drm_get_connector_name(set->connectors[i]));
                                set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON);
                        }
                }
                drm_helper_disable_unused_functions(dev);
        } else if (fb_changed) {
                set->crtc->x = set->x;
                set->crtc->y = set->y;

                old_fb = set->crtc->fb;
                if (set->crtc->fb != set->fb)
                        set->crtc->fb = set->fb;
                ret = crtc_funcs->mode_set_base(set->crtc,
                                                set->x, set->y, old_fb);
                if (ret != 0) {
                        set->crtc->fb = old_fb;
                        goto fail;
                }
        }

        free(save_connectors, DRM_MEM_KMS);
        free(save_encoders, DRM_MEM_KMS);
        free(save_crtcs, DRM_MEM_KMS);
        return 0;

fail:
        /* Restore all previous data. */
        count = 0;
        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
                *crtc = save_crtcs[count++];
        }

        count = 0;
        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
                *encoder = save_encoders[count++];
        }

        count = 0;
        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                *connector = save_connectors[count++];
        }

        /* Try to restore the config */
        if (mode_changed &&
            !drm_crtc_helper_set_mode(save_set.crtc, save_set.mode, save_set.x,
                                      save_set.y, save_set.fb))
                DRM_ERROR("failed to restore config after modeset failure\n");

        free(save_connectors, DRM_MEM_KMS);
        free(save_encoders, DRM_MEM_KMS);
        free(save_crtcs, DRM_MEM_KMS);
        return ret;
}
EXPORT_SYMBOL(drm_crtc_helper_set_config);

static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
{
        int dpms = DRM_MODE_DPMS_OFF;
        struct drm_connector *connector;
        struct drm_device *dev = encoder->dev;

        list_for_each_entry(connector, &dev->mode_config.connector_list, head)
                if (connector->encoder == encoder)
                        if (connector->dpms < dpms)
                                dpms = connector->dpms;
        return dpms;
}

static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
{
        int dpms = DRM_MODE_DPMS_OFF;
        struct drm_connector *connector;
        struct drm_device *dev = crtc->dev;

        list_for_each_entry(connector, &dev->mode_config.connector_list, head)
                if (connector->encoder && connector->encoder->crtc == crtc)
                        if (connector->dpms < dpms)
                                dpms = connector->dpms;
        return dpms;
}

/**
 * drm_helper_connector_dpms() - connector dpms helper implementation
 * @connector: affected connector
 * @mode: DPMS mode
 *
 * This is the main helper function provided by the crtc helper framework for
 * implementing the DPMS connector attribute. It computes the new desired DPMS
 * state for all encoders and crtcs in the output mesh and calls the ->dpms()
 * callback provided by the driver appropriately.
 */
void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
{
        struct drm_encoder *encoder = connector->encoder;
        struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
        int old_dpms;

        if (mode == connector->dpms)
                return;

        old_dpms = connector->dpms;
        connector->dpms = mode;

        /* from off to on, do crtc then encoder */
        if (mode < old_dpms) {
                if (crtc) {
                        struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
                        if (crtc_funcs->dpms)
                                (*crtc_funcs->dpms) (crtc,
                                                     drm_helper_choose_crtc_dpms(crtc));
                }
                if (encoder) {
                        struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
                        if (encoder_funcs->dpms)
                                (*encoder_funcs->dpms) (encoder,
                                                        drm_helper_choose_encoder_dpms(encoder));
                }
        }

        /* from on to off, do encoder then crtc */
        if (mode > old_dpms) {
                if (encoder) {
                        struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
                        if (encoder_funcs->dpms)
                                (*encoder_funcs->dpms) (encoder,
                                                        drm_helper_choose_encoder_dpms(encoder));
                }
                if (crtc) {
                        struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
                        if (crtc_funcs->dpms)
                                (*crtc_funcs->dpms) (crtc,
                                                     drm_helper_choose_crtc_dpms(crtc));
                }
        }

        return;
}
EXPORT_SYMBOL(drm_helper_connector_dpms);

int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
                                   struct drm_mode_fb_cmd2 *mode_cmd)
{
        int i;

        fb->width = mode_cmd->width;
        fb->height = mode_cmd->height;
        for (i = 0; i < 4; i++) {
                fb->pitches[i] = mode_cmd->pitches[i];
                fb->offsets[i] = mode_cmd->offsets[i];
        }
        drm_fb_get_bpp_depth(mode_cmd->pixel_format, &fb->depth,
                                    &fb->bits_per_pixel);
        fb->pixel_format = mode_cmd->pixel_format;

        return 0;
}
EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);

int drm_helper_resume_force_mode(struct drm_device *dev)
{
        struct drm_crtc *crtc;
        struct drm_encoder *encoder;
        struct drm_encoder_helper_funcs *encoder_funcs;
        struct drm_crtc_helper_funcs *crtc_funcs;
        int ret;

        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {

                if (!crtc->enabled)
                        continue;

                ret = drm_crtc_helper_set_mode(crtc, &crtc->mode,
                                               crtc->x, crtc->y, crtc->fb);

                if (ret == false)
                        DRM_ERROR("failed to set mode on crtc %p\n", crtc);

                /* Turn off outputs that were already powered off */
                if (drm_helper_choose_crtc_dpms(crtc)) {
                        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {

                                if(encoder->crtc != crtc)
                                        continue;

                                encoder_funcs = encoder->helper_private;
                                if (encoder_funcs->dpms)
                                        (*encoder_funcs->dpms) (encoder,
                                                                drm_helper_choose_encoder_dpms(encoder));
                        }

                        crtc_funcs = crtc->helper_private;
                        if (crtc_funcs->dpms)
                                (*crtc_funcs->dpms) (crtc,
                                                     drm_helper_choose_crtc_dpms(crtc));
                }
        }
        /* disable the unused connectors while restoring the modesetting */
        drm_helper_disable_unused_functions(dev);
        return 0;
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);

void drm_kms_helper_hotplug_event(struct drm_device *dev)
{
        /* send a uevent + call fbdev */
#ifdef FREEBSD_NOTYET
        drm_sysfs_hotplug_event(dev);
#endif /* FREEBSD_NOTYET */
        if (dev->mode_config.funcs->output_poll_changed)
                dev->mode_config.funcs->output_poll_changed(dev);
}
EXPORT_SYMBOL(drm_kms_helper_hotplug_event);

#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
static void output_poll_execute(void *ctx, int pending)
{
        struct drm_device *dev = ctx;
        struct drm_connector *connector;
        enum drm_connector_status old_status;
        bool repoll = false, changed = false;

        if (!drm_kms_helper_poll)
                return;

        sx_xlock(&dev->mode_config.mutex);
        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {

                /* Ignore forced connectors. */
                if (connector->force)
                        continue;

                /* Ignore HPD capable connectors and connectors where we don't
                 * want any hotplug detection at all for polling. */
                if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD)
                        continue;

                repoll = true;

                old_status = connector->status;
                /* if we are connected and don't want to poll for disconnect
                   skip it */
                if (old_status == connector_status_connected &&
                    !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT))
                        continue;

                connector->status = connector->funcs->detect(connector, false);
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
                              connector->base.id,
                              drm_get_connector_name(connector),
                              old_status, connector->status);
                if (old_status != connector->status)
                        changed = true;
        }

        sx_xunlock(&dev->mode_config.mutex);

        if (changed)
                drm_kms_helper_hotplug_event(dev);

        if (repoll)
                taskqueue_enqueue_timeout(taskqueue_thread,
                    &dev->mode_config.output_poll_work,
                    DRM_OUTPUT_POLL_PERIOD);
}

void drm_kms_helper_poll_disable(struct drm_device *dev)
{
        if (!dev->mode_config.poll_enabled)
                return;
        taskqueue_cancel_timeout(taskqueue_thread,
            &dev->mode_config.output_poll_work, NULL);
}
EXPORT_SYMBOL(drm_kms_helper_poll_disable);

void drm_kms_helper_poll_enable(struct drm_device *dev)
{
        bool poll = false;
        struct drm_connector *connector;

        if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
                return;

        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
                if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
                                         DRM_CONNECTOR_POLL_DISCONNECT))
                        poll = true;
        }

        if (poll)
                taskqueue_enqueue_timeout(taskqueue_thread,
                    &dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD);
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);

void drm_kms_helper_poll_init(struct drm_device *dev)
{
        TIMEOUT_TASK_INIT(taskqueue_thread, &dev->mode_config.output_poll_work,
            0, output_poll_execute, dev);
        dev->mode_config.poll_enabled = true;

        drm_kms_helper_poll_enable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_init);

void drm_kms_helper_poll_fini(struct drm_device *dev)
{
        drm_kms_helper_poll_disable(dev);
}
EXPORT_SYMBOL(drm_kms_helper_poll_fini);

void drm_helper_hpd_irq_event(struct drm_device *dev)
{
        struct drm_connector *connector;
        enum drm_connector_status old_status;
        bool changed = false;

        if (!dev->mode_config.poll_enabled)
                return;

        sx_xlock(&dev->mode_config.mutex);
        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {

                /* Only handle HPD capable connectors. */
                if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
                        continue;

                old_status = connector->status;

                connector->status = connector->funcs->detect(connector, false);
                DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
                              connector->base.id,
                              drm_get_connector_name(connector),
                              old_status, connector->status);
                if (old_status != connector->status)
                        changed = true;
        }

        sx_xunlock(&dev->mode_config.mutex);

        if (changed)
                drm_kms_helper_hotplug_event(dev);
}
EXPORT_SYMBOL(drm_helper_hpd_irq_event);