/*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (c) 1982, 1985, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include <errno.h> #include <stdio.h> #include "errlst.h" const char __uprefix[] = "Unknown error"; const char *const sys_errlist[] = { "No error: 0", /* 0 - ENOERROR */ "Operation not permitted", /* 1 - EPERM */ "No such file or directory", /* 2 - ENOENT */ "No such process", /* 3 - ESRCH */ "Interrupted system call", /* 4 - EINTR */ "Input/output error", /* 5 - EIO */ "Device not configured", /* 6 - ENXIO */ "Argument list too long", /* 7 - E2BIG */ "Exec format error", /* 8 - ENOEXEC */ "Bad file descriptor", /* 9 - EBADF */ "No child processes", /* 10 - ECHILD */ "Resource deadlock avoided", /* 11 - EDEADLK */ "Cannot allocate memory", /* 12 - ENOMEM */ "Permission denied", /* 13 - EACCES */ "Bad address", /* 14 - EFAULT */ "Block device required", /* 15 - ENOTBLK */ "Device busy", /* 16 - EBUSY */ "File exists", /* 17 - EEXIST */ "Cross-device link", /* 18 - EXDEV */ "Operation not supported by device", /* 19 - ENODEV */ "Not a directory", /* 20 - ENOTDIR */ "Is a directory", /* 21 - EISDIR */ "Invalid argument", /* 22 - EINVAL */ "Too many open files in system", /* 23 - ENFILE */ "Too many open files", /* 24 - EMFILE */ "Inappropriate ioctl for device", /* 25 - ENOTTY */ "Text file busy", /* 26 - ETXTBSY */ "File too large", /* 27 - EFBIG */ "No space left on device", /* 28 - ENOSPC */ "Illegal seek", /* 29 - ESPIPE */ "Read-only file system", /* 30 - EROFS */ "Too many links", /* 31 - EMLINK */ "Broken pipe", /* 32 - EPIPE */ /* math software */ "Numerical argument out of domain", /* 33 - EDOM */ "Result too large", /* 34 - ERANGE */ /* non-blocking and interrupt i/o */ "Resource temporarily unavailable", /* 35 - EAGAIN */ /* 35 - EWOULDBLOCK */ "Operation now in progress", /* 36 - EINPROGRESS */ "Operation already in progress", /* 37 - EALREADY */ /* ipc/network software -- argument errors */ "Socket operation on non-socket", /* 38 - ENOTSOCK */ "Destination address required", /* 39 - EDESTADDRREQ */ "Message too long", /* 40 - EMSGSIZE */ "Protocol wrong type for socket", /* 41 - EPROTOTYPE */ "Protocol not available", /* 42 - ENOPROTOOPT */ "Protocol not supported", /* 43 - EPROTONOSUPPORT */ "Socket type not supported", /* 44 - ESOCKTNOSUPPORT */ "Operation not supported", /* 45 - EOPNOTSUPP */ "Protocol family not supported", /* 46 - EPFNOSUPPORT */ /* 47 - EAFNOSUPPORT */ "Address family not supported by protocol family", "Address already in use", /* 48 - EADDRINUSE */ "Can't assign requested address", /* 49 - EADDRNOTAVAIL */ /* ipc/network software -- operational errors */ "Network is down", /* 50 - ENETDOWN */ "Network is unreachable", /* 51 - ENETUNREACH */ "Network dropped connection on reset", /* 52 - ENETRESET */ "Software caused connection abort", /* 53 - ECONNABORTED */ "Connection reset by peer", /* 54 - ECONNRESET */ "No buffer space available", /* 55 - ENOBUFS */ "Socket is already connected", /* 56 - EISCONN */ "Socket is not connected", /* 57 - ENOTCONN */ "Can't send after socket shutdown", /* 58 - ESHUTDOWN */ "Too many references: can't splice", /* 59 - ETOOMANYREFS */ "Operation timed out", /* 60 - ETIMEDOUT */ "Connection refused", /* 61 - ECONNREFUSED */ "Too many levels of symbolic links", /* 62 - ELOOP */ "File name too long", /* 63 - ENAMETOOLONG */ /* should be rearranged */ "Host is down", /* 64 - EHOSTDOWN */ "No route to host", /* 65 - EHOSTUNREACH */ "Directory not empty", /* 66 - ENOTEMPTY */ /* quotas & mush */ "Too many processes", /* 67 - EPROCLIM */ "Too many users", /* 68 - EUSERS */ "Disc quota exceeded", /* 69 - EDQUOT */ /* Network File System */ "Stale NFS file handle", /* 70 - ESTALE */ "Too many levels of remote in path", /* 71 - EREMOTE */ "RPC struct is bad", /* 72 - EBADRPC */ "RPC version wrong", /* 73 - ERPCMISMATCH */ "RPC prog. not avail", /* 74 - EPROGUNAVAIL */ "Program version wrong", /* 75 - EPROGMISMATCH */ "Bad procedure for program", /* 76 - EPROCUNAVAIL */ "No locks available", /* 77 - ENOLCK */ "Function not implemented", /* 78 - ENOSYS */ "Inappropriate file type or format", /* 79 - EFTYPE */ "Authentication error", /* 80 - EAUTH */ "Need authenticator", /* 81 - ENEEDAUTH */ "Identifier removed", /* 82 - EIDRM */ "No message of desired type", /* 83 - ENOMSG */ "Value too large to be stored in data type", /* 84 - EOVERFLOW */ "Operation canceled", /* 85 - ECANCELED */ "Illegal byte sequence", /* 86 - EILSEQ */ "Attribute not found", /* 87 - ENOATTR */ /* General */ "Programming error", /* 88 - EDOOFUS */ "Bad message", /* 89 - EBADMSG */ "Multihop attempted", /* 90 - EMULTIHOP */ "Link has been severed", /* 91 - ENOLINK */ "Protocol error", /* 92 - EPROTO */ "Capabilities insufficient", /* 93 - ENOTCAPABLE */ "Not permitted in capability mode", /* 94 - ECAPMODE */ "State not recoverable", /* 95 - ENOTRECOVERABLE */ "Previous owner died", /* 96 - EOWNERDEAD */ "Integrity check failed", /* 97 - EINTEGRITY */ /* * Reserved space in sys_errlist, take the next slot for a next error code. * Reserve prevents the array size from changing for some time. */ __uprefix, /* 98 */ __uprefix, /* 99 */ __uprefix, /* 100 */ __uprefix, /* 101 */ __uprefix, /* 102 */ __uprefix, /* 103 */ __uprefix, /* 104 */ __uprefix, /* 105 */ __uprefix, /* 106 */ __uprefix, /* 107 */ __uprefix, /* 108 */ __uprefix, /* 109 */ __uprefix, /* 110 */ __uprefix, /* 111 */ __uprefix, /* 112 */ __uprefix, /* 113 */ __uprefix, /* 114 */ __uprefix, /* 115 */ __uprefix, /* 116 */ __uprefix, /* 117 */ __uprefix, /* 118 */ __uprefix, /* 119 */ __uprefix, /* 120 */ __uprefix, /* 121 */ __uprefix, /* 122 */ __uprefix, /* 123 */ __uprefix, /* 124 */ __uprefix, /* 125 */ __uprefix, /* 126 */ __uprefix, /* 127 */ __uprefix, /* 128 */ __uprefix, /* 129 */ __uprefix, /* 130 */ __uprefix, /* 131 */ __uprefix, /* 132 */ __uprefix, /* 133 */ __uprefix, /* 134 */ __uprefix, /* 135 */ __uprefix, /* 136 */ __uprefix, /* 137 */ __uprefix, /* 138 */ __uprefix, /* 139 */ __uprefix, /* 140 */ __uprefix, /* 141 */ __uprefix, /* 142 */ __uprefix, /* 143 */ __uprefix, /* 144 */ __uprefix, /* 145 */ __uprefix, /* 146 */ __uprefix, /* 147 */ __uprefix, /* 148 */ __uprefix, /* 149 */ __uprefix, /* 150 */ }; const int sys_nerr = ELAST + 1; #ifdef PIC __strong_reference(sys_errlist, __hidden_sys_errlist); __strong_reference(sys_nerr, __hidden_sys_nerr); #endif
