DP_INFO
DP_INFO(p_hwfn->p_dev,
DP_INFO(p_hwfn->p_dev,
DP_INFO(p_hwfn->p_dev,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "Skipping final cleanup for non-ASIC\n");
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn->p_dev, "Configurating Emulation Link %02x\n", port);
DP_INFO(p_hwfn->p_dev, "Configurating Emulation Link %02x\n", port);
DP_INFO(p_hwfn,
DP_INFO(p_hwfn->p_dev, "link is not being configured\n");
DP_INFO(p_hwfn, "PCI relax ordering configured by MFW\n");
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "Failed to update firmware version\n");
DP_INFO(p_hwfn, "Failed to update default mtu\n");
DP_INFO(p_hwfn, "Failed to update driver state\n");
DP_INFO(p_hwfn, "Failed to update eswitch mode\n");
DP_INFO(p_hwfn,
DP_INFO(p_dev,
DP_INFO(p_hwfn->p_dev,
DP_INFO(p_dev,
DP_INFO(p_dev,
DP_INFO(p_dev, "ecore_get_wake_info: wk_buffer[%u]: 0x%08x\n",
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "Multi function mode is 0x%lx\n",
DP_INFO(p_dev->hwfns,
DP_INFO(p_dev, "%s access to the device\n",
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn->p_dev, "MCP_REG_CPU_STATE: %08x - Masking...\n",
DP_INFO(p_hwfn->p_dev, "PF[0x%02x] VF [0x%02x] [Valid 0x%02x] Client [0x%02x] Write [0x%02x] Addr [0x%08x]\n",
DP_INFO(p_hwfn, "FPGA - don't enable ATTN generation in IGU\n");
DP_INFO(p_hwfn, "FPGA - Don't enable Attentions in IGU and MISC\n");
DP_INFO(p_hwfn->p_dev, "Incorrect access to %08x of length %08x - PF [%02x] VF [%04x] [valid %02x] client [%02x] write [%02x] Byte-Enable [%04x] [%08x]\n",
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "Can't relocate SBs as MFW is too old.\n");
DP_INFO(p_hwfn, "General attention 35!\n");
DP_INFO(p_hwfn, "DORQ fatal attention\n");
DP_INFO(p_hwfn, "TM attention on emulation - most likely results of clock-ratios\n");
DP_INFO(p_hwfn, "Deasserted attention `%s'[%08x]\n",
DP_INFO(p_hwfn, "`%s (attention)': Calling Callback function\n",
DP_INFO(p_hwfn, "`%s' - Disabled future attentions\n",
DP_INFO(p_hwfn, "`%s' - Disabled future parity errors\n",
DP_INFO(p_hwfn, "Failed to terminate syn connection\n");
DP_INFO(p_hwfn, "Failed to terminate ooo connection\n");
DP_INFO(p_hwfn, "Failed to terminate mpa connection\n");
DP_INFO(p_hwfn, "Failed to allocate LL2 buffer desc\n");
DP_INFO(p_hwfn, "Failed to allocate LL2 buffers\n");
DP_INFO(p_hwfn, "Multicast filter cmd: [%s], bins: [%08x, %08x, %08x, %08x, %08x, %08x, %08x, %08x], ret = %d\n",
DP_INFO(p_dev, "Reset stats not allocated\n");
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "Unimplemented MFW message %d\n", i);
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "Unknown transcevier type 0x%x\n",
DP_INFO(p_hwfn, "Non-ASIC - always notify that link is up\n");
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "%s sending of mailbox commands to the MFW\n",
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "Ref cnt requested for inactive rdma\n");
DP_INFO(p_hwfn->p_dev, "ecore rdma query stats failed due to NULL rdma_info\n");
DP_INFO(p_hwfn, "Invalid priority type %d\n",
DP_INFO(p_hwfn, "Ramrod is stuck, requesting MCP drain\n");
DP_INFO(p_hwfn,
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "VF[%d] is running an old driver that doesn't support 100g\n",
DP_INFO(p_hwfn,
DP_INFO(p_hwfn->p_dev, "Unknown sriov eqe event 0x%02x\n",
DP_INFO(p_hwfn, "Unexpected vport-update TLV[%d] %s\n",
DP_INFO(p_hwfn,
DP_INFO(p_hwfn, "Chip details - %s%d\n",
DP_INFO(p_hwfn,