/* * Copyright (c) 2003,2004,2008 The DragonFly Project. All rights reserved. * * This code is derived from software contributed to The DragonFly Project * by Matthew Dillon <dillon@backplane.com> * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name of The DragonFly Project nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific, prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Copyright (c) 1996, by Peter Wemm and Steve Passe, All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the developer may NOT be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: src/sys/i386/include/apic.h,v 1.14.2.2 2003/03/21 21:46:15 jhb Exp $ * $DragonFly: src/sys/platform/pc64/apic/apicreg.h,v 1.1 2008/08/29 17:07:12 dillon Exp $ */ #ifndef _MACHINE_APICREG_H_ #define _MACHINE_APICREG_H_ /* * Local && I/O APIC definitions for Pentium P54C+ Built-in APIC. * * A per-cpu APIC resides in memory location 0xFEE00000. * * 31 ... 24 23 ... 16 15 ... 8 7 ... 0 * +-----------+-----------+-----------+-----------+ * 0000 | | | | | * 0010 | | | | | * +-----------+-----------+-----------+-----------+ * * +-----------+-----------+-----------+-----------+ * 0020 ID | | ID | | | | RW * +-----------+-----------+-----------+-----------+ * * The physical APIC ID is used with physical interrupt * delivery modes. * * +-----------+-----------+-----------+-----------+ * 0030 VER | | | | | * +-----------+-----------+-----------+-----------+ * 0040 | | | | | * 0050 | | | | | * 0060 | | | | | * 0070 | | | | | * +-----------+-----------+-----------+-----------+ * 0080 TPR | | | | PRIO SUBC | * 0090 APR | | | | | * 00A0 PPR | | | | | * +-----------+-----------+-----------+-----------+ * * The Task Priority Register provides a priority threshold * mechanism for interrupting the processor. Only interrupts * with a higher priority then that specified in the TPR will * be served. Other interrupts are recorded and serviced * as soon as the TPR value decreases enough to allow that * (unless EOId by another APIC). * * PRIO (7:4). Main priority. If 15 the APIC will not * accept any interrupts. * SUBC (3:0) Sub priority. See APR/PPR. * * * The Processor Priority Register determines whether a * pending interrupt can be dispensed to the processor. ISRV * Is the vector of the highest priority ISR bit set or * zero if no ISR bit is set. * * IF TPR[7:4] >= ISRV[7:4] * PPR[7:0] = TPR[7:0] * ELSE * PPR[7:0] = ISRV[7:4].000 * * The Arbitration Priority Register holds the current * lowest priority of the procsesor, a value used during * lowest-priority arbitration. * * IF (TPR[7:4] >= IRRV[7:4] AND TPR[7:4] > ISRV[7:4]) * APR[7:0] = TPR[7:0] * ELSE * APR[7:4] = max((TPR[7:4]&ISRV[7:4]),IRRV[7:4]).000 * * +-----------+-----------+-----------+-----------+ * 00B0 EOI | | | | | * +-----------+-----------+-----------+-----------+ * 00C0 | | | | | * +-----------+-----------+-----------+-----------+ * 00D0 LDR |LOG APICID | | | | * +-----------+-----------+-----------+-----------+ * 00E0 DFR |MODEL| | | | | * +-----------+-----------+-----------+-----------+ * * The logical APIC ID is used with logical interrupt * delivery modes. Interpretation of logical destination * information depends on the MODEL bits in the Destination * Format Regiuster. * * MODEL=1111 FLAT MODEL - The MDA is interpreted as * a decoded address. By setting * one bit in the LDR for each * local apic 8 APICs can coexist. * * MODEL=0000 CLUSTER MODEL - * * 31 ... 24 23 ... 16 15 ... 8 7 ... 0 * +-----------+-----------+-----------+-----------+ * 00F0 SVR | | | FE | vvvvvvvv | * +-----------+-----------+-----------+-----------+ * * Spurious interrupt vector register. The 4 low * vector bits must be programmed to 1111, e.g. * vvvv1111. * * E - LAPIC enable (0 = disable, 1 = enable) * * F - Focus processor disable (1 = disable, 0 = enable) * * NOTE: The handler for the spurious interrupt vector * should *NOT* issue an EOI because the spurious * interrupt does not effect the ISR. * * +-----------+-----------+-----------+-----------+ * 0100-0170 ISR| | | | | * 0180-01F0 TMR| | | | | * 0200-0270 IRR| | | | | * +-----------+-----------+-----------+-----------+ * * These registers represent 256 bits, one bit for each * possible interrupt. Interrupts 0-15 are reserved so * bits 0-15 are also reserved. * * TMR - Trigger mode register. Upon acceptance of an int * the corresponding bit is cleared for edge-trig and * set for level-trig. If the TMR bit is set (level), * the local APIC sends an EOI to all I/O APICs as * a result of software issuing an EOI command. * * IRR - Interrupt Request Register. Contains active * interrupt requests that have been accepted but not * yet dispensed by the current local APIC. The bit is * cleared and the corresponding ISR bit is set when * the INTA cycle is issued. * * ISR - Interrupt In-Service register. Interrupt has been * delivered but not yet fully serviced. Cleared when * an EOI is issued from the processor. An EOI will * also send an EOI to all I/O APICs if TMR was set. * * +-----------+-----------+-----------+-----------+ * 0280 ESR | | | | | * 0290-02F0 | | | | | * +--FEDCBA98-+--76543210-+--FEDCBA98-+-----------+ * 0300 ICR_LO | | XX | TL SDMMM | vector | * 0310 ICR_HI | DEST FIELD| | | | * +-----------+-----------+-----------+-----------+ * * The interrupt command register. Generally speaking * writing to ICR_LO initiates a command. All fields * are R/W except the 'S' (delivery status) field, which * is read-only. When * * * XX: Destination Shorthand field: * * 00 Use Destination field * 01 Self only. Dest field ignored. * 10 All including self (uses a * destination field of 0x0F) * 11 All excluding self (uses a * destination field of 0x0F) * * T: 1 = Level 0 = Edge Trigger modde, used for * the INIT level de-assert delivery mode only * to de-assert a request. * * L: 0 = De-Assert, 1 = Assert. Always write as * 1 when initiating a new command. Can only * write as 0 for INIT mode de-assertion of * command. * * S: 1 = Send Pending. Interrupt has been injected * but APIC has not yet accepted it. * * D: 0=physical 1=logical. In physical mode * only 24-27 of DEST FIELD is used from ICR_HI. * * MMM: 000 Fixed. Deliver to all processors according * to the ICR. Always treated as edge trig. * * 001 Lowest Priority. Deliver to just the * processor running at the lowest priority. * * 010 SMI. The vector must be 00B. Only edge * triggered is allowed. The vector field * must be programmed to zero (huh?). * * 011 <reserved> * * 100 NMI. Deliver as an NMI to all processors * listed in the destination field. The * vector is ignored. Alawys treated as * edge triggered. * * 101 INIT. Deliver as an INIT signal to all * processors (like FIXED). Vector is ignored * and it is always edge-triggered. * * 110 Start Up. Sends a special message between * cpus. the vector contains a start-up * address for MP boot protocol. * Always edge triggered. Note: a startup * int is not automatically tried in case of * failure. * * 111 <reserved> * * +-----------+--------10-+--FEDCBA98-+-----------+ * 0320 LTIMER | | TM | ---S---- | vector | * 0330 | | | | | * +-----------+--------10-+--FEDCBA98-+-----------+ * 0340 LVPCINT | | -M | ---S-MMM | vector | * 0350 LVINT0 | | -M | LRPS-MMM | vector | * 0360 LVINT1 | | -M | LRPS-MMM | vector | * 0370 LVERROR | | -M | -------- | vector | * +-----------+-----------+-----------+-----------+ * * T: 1 = periodic, 0 = one-shot * * M: 1 = masked * * L: 1 = level, 0 = edge * * R: For level triggered only, set to 1 when a * level int is accepted, cleared by EOI. * * P: Pin Polarity 0 = Active High, 1 = Active Low * * S: 1 = Send Pending. Interrupt has been injected * but APIC has not yet accepted it. * * MMM 000 = Fixed deliver to cpu according to LVT * * MMM 100 = NMI deliver as an NMI. Always edge * * MMM 111 = ExtInt deliver from 8259, routes INTA * bus cycle to external * controller. Controller is * expected to supply vector. * Always level. * * +-----------+-----------+-----------+-----------+ * 0380 TMR_ICR | | | | | * 0390 TMR_CCR | | | | | * +-----------+-----------+-----------+-----------+ * * The timer initial count register and current count * register (32 bits) * * +-----------+-----------+-----------+-----------+ * 03A0 | | | | | * 03B0 | | | | | * 03C0 | | | | | * 03D0 | | | | | * +-----------+-----------+-----------+-----------+ * 03E0 TMR_DCR | | | | d-dd | * +-----------+-----------+-----------+-----------+ * * The timer divide configuration register. d-dd is: * * 0000 - divide by 2 * 0001 - divide by 4 * 0010 - divide by 8 * 0011 - divide by 16 * 1000 - divide by 32 * 1001 - divide by 64 * 1010 - divide by 128 * 1011 - divide by 1 * * NOTE ON EOI: Upon receiving an EOI the APIC clears the highest priority * interrupt in the ISR and selects the next highest priority interrupt * for posting to the CPU. If the interrupt being EOId was level * triggered the APIC will send an EOI to all I/O APICs. For the moment * you can write garbage to the EOI register but for future compatibility * 0 should be written. * * 03F0 SELF_IPI * 0400 EXT_FEAT * 0410 EXT_CTRL * 0420 EXT_SEOI * 0430 * 0440 * 0450 * 0460 * 0470 * 0480 EXT_IER0 * 0490 EXT_IER1 * 04A0 EXT_IER2 * 04B0 EXT_IER3 * 04C0 EXT_IER4 * 04D0 EXT_IER5 * 04E0 EXT_IER6 * 04F0 EXT_IER7 * 0500 EXT_LVT0 * 0510 EXT_LVT1 * 0520 EXT_LVT2 * 0530 EXT_LVT3 */ #ifndef LOCORE #include <sys/types.h> #define PAD3 int : 32; int : 32; int : 32 #define PAD4 int : 32; int : 32; int : 32; int : 32 struct LAPIC { /* reserved */ PAD4; /* reserved */ PAD4; u_int32_t id; PAD3; /* 0020 R/W */ u_int32_t version; PAD3; /* 0030 RO */ /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; u_int32_t tpr; PAD3; u_int32_t apr; PAD3; u_int32_t ppr; PAD3; u_int32_t eoi; PAD3; /* reserved */ PAD4; u_int32_t ldr; PAD3; u_int32_t dfr; PAD3; u_int32_t svr; PAD3; u_int32_t isr0; PAD3; u_int32_t isr1; PAD3; u_int32_t isr2; PAD3; u_int32_t isr3; PAD3; u_int32_t isr4; PAD3; u_int32_t isr5; PAD3; u_int32_t isr6; PAD3; u_int32_t isr7; PAD3; u_int32_t tmr0; PAD3; u_int32_t tmr1; PAD3; u_int32_t tmr2; PAD3; u_int32_t tmr3; PAD3; u_int32_t tmr4; PAD3; u_int32_t tmr5; PAD3; u_int32_t tmr6; PAD3; u_int32_t tmr7; PAD3; u_int32_t irr0; PAD3; u_int32_t irr1; PAD3; u_int32_t irr2; PAD3; u_int32_t irr3; PAD3; u_int32_t irr4; PAD3; u_int32_t irr5; PAD3; u_int32_t irr6; PAD3; u_int32_t irr7; PAD3; u_int32_t esr; PAD3; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; u_int32_t icr_lo; PAD3; u_int32_t icr_hi; PAD3; u_int32_t lvt_timer; PAD3; /* reserved */ PAD4; u_int32_t lvt_pcint; PAD3; u_int32_t lvt_lint0; PAD3; u_int32_t lvt_lint1; PAD3; u_int32_t lvt_error; PAD3; u_int32_t icr_timer; PAD3; u_int32_t ccr_timer; PAD3; /* e9 */ /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; u_int32_t dcr_timer; PAD3; /* 3e */ u_int32_t self_ipi; PAD3; /* 3f - Only in x2APIC */ u_int32_t ext_feat; PAD3; u_int32_t ext_ctrl; PAD3; u_int32_t ext_seoi; PAD3; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; /* reserved */ PAD4; u_int32_t ext_ier0; PAD3; u_int32_t ext_ier1; PAD3; u_int32_t ext_ier2; PAD3; u_int32_t ext_ier3; PAD3; u_int32_t ext_ier4; PAD3; u_int32_t ext_ier5; PAD3; u_int32_t ext_ier6; PAD3; u_int32_t ext_ier7; PAD3; struct { /* 50 */ u_int32_t lvt; PAD3; } ext_lvt[16]; } __packed; typedef struct LAPIC lapic_t; /****************************************************************************** * I/O APIC structure */ struct IOAPIC { u_int32_t ioregsel; PAD3; u_int32_t iowin; PAD3; }; typedef struct IOAPIC ioapic_t; #undef PAD4 #undef PAD3 /* X2APIC */ #define MSR_X2APIC_BASE 0x00000800 #define MSR_X2APIC_ID 0x00000802 #define MSR_X2APIC_EOI 0x0000080b #define MSR_X2APIC_DFR_RSVD 0x0000080e #define MSR_X2APIC_ICR 0x00000830 #define MSR_X2APIC_ICR_RSVD 0x00000831 #define MSR_X2APIC_ICR_TIMER 0x00000838 #define MSR_X2APIC_CCR_TIMER 0x00000839 #define MSR_X2APIC_SELFIPI 0x0000083f #define MSR_X2APIC_MIN MSR_X2APIC_ID #define MSR_X2APIC_MAX MSR_X2APIC_SELFIPI #define LAPIC2MSR(field) __extension__ ({ \ uint32_t __msr; \ \ __msr = MSR_X2APIC_BASE + \ (__offsetof(struct LAPIC, field) >> 4); \ KASSERT(__msr >= MSR_X2APIC_MIN && \ __msr <= MSR_X2APIC_MAX && \ __msr != MSR_X2APIC_DFR_RSVD && \ __msr != MSR_X2APIC_ICR && \ __msr != MSR_X2APIC_ICR_RSVD, \ ("invalid MSR 0x%08x", __msr)); \ __msr; \ }) #endif /* !LOCORE */ /****************************************************************************** * various code 'logical' values */ /* * TPR loads to prioritize which cpu grabs an interrupt * * (note: some fields of the TPR are reserved) */ #define LOPRIO_LEVEL 0x00000010 /* TPR of CPU accepting INTs */ #define ALLHWI_LEVEL 0x00000000 /* TPR of CPU grabbing INTs */ /****************************************************************************** * LOCAL APIC defines */ /* * default physical location for the LOCAL (CPU) APIC */ #define DEFAULT_APIC_BASE 0xfee00000 /* * lapic.id (rw) */ #define APIC_ID_MASK 0xff000000 #define APIC_ID_SHIFT 24 #define APIC_ID_CLUSTER 0xf0 #define APIC_ID_CLUSTER_ID 0x0f #define APIC_MAX_CLUSTER 0xe #define APIC_MAX_INTRACLUSTER_ID 3 #define APIC_ID_CLUSTER_SHIFT 4 #define APIC_ID(id) (((id) & APIC_ID_MASK) >> APIC_ID_SHIFT) /* * lapic.ver (ro) */ #define APIC_VER_VERSION 0x000000ff #define APIC_VER_MAXLVT 0x00ff0000 #define MAXLVTSHIFT 16 #define APIC_VER_EOI_SUPP 0x01000000 #define APIC_VER_AMD_EXT_SPACE 0x80000000 /* * lapic.ldr (rw) */ #define APIC_LDR_RESERVED 0x00ffffff /* * lapic.dfr (rw) * * The logical APIC ID is used with logical interrupt * delivery modes. Interpretation of logical destination * information depends on the MODEL bits in the Destination * Format Regiuster. * * MODEL=1111 FLAT MODEL - The MDA is interpreted as * a decoded address. By setting * one bit in the LDR for each * local apic 8 APICs can coexist. * * MODEL=0000 CLUSTER MODEL - */ #define APIC_DFR_RESERVED 0x0fffffff #define APIC_DFR_MODEL_MASK 0xf0000000 #define APIC_DFR_MODEL_FLAT 0xf0000000 #define APIC_DFR_MODEL_CLUSTER 0x00000000 /* * lapic.svr * * Contains the spurious interrupt vector and bits to enable/disable * the local apic and focus processor. */ #define APIC_SVR_VECTOR 0x000000ff #define APIC_SVR_ENABLE 0x00000100 #define APIC_SVR_FOCUS_DISABLE 0x00000200 #define APIC_SVR_EOI_SUPP 0x00001000 /* * lapic.tpr * * PRIO (7:4). Main priority. If 15 the APIC will not * accept any interrupts. * SUBC (3:0) Sub priority. See APR/PPR. */ #define APIC_TPR_PRIO 0x000000ff #define APIC_TPR_INT 0x000000f0 #define APIC_TPR_SUB 0x0000000f /* * lapic.icr_lo -------- ----XXRR TL-SDMMM vvvvvvvv * * The interrupt command register. Generally speaking * writing to ICR_LO initiates a command. All fields * are R/W except the 'S' (delivery status) field, which * is read-only. When * * XX: Destination Shorthand field: * * 00 - Use Destination field * 01 - Self only. Dest field ignored. * 10 - All including self (uses a * destination field of 0x0F) * 11 - All excluding self (uses a * destination field of 0x0F) * * RR: RR mode (? needs documentation) * * T: 1 = Level 0 = Edge Trigger modde, used for * the INIT level de-assert delivery mode only * to de-assert a request. * * L: 0 = De-Assert, 1 = Assert. Always write as * 1 when initiating a new command. Can only * write as 0 for INIT mode de-assertion of * command. * * S: 1 = Send Pending. Interrupt has been injected but the APIC * has not yet accepted it. * * D: 0 = physical 1 = logical. In physical mode only bits 24-27 * of the DEST field is used from ICR_HI. * * MMM: Delivery mode * * 000 - Fixed. Deliver to all processors according to the * ICR. Always treated as edge triggered. * * 001 - Lowest Priority. Deliver to just the processor * running at the lowest priority. * * 010 - SMI. The vector must be 00B. Only edge triggered * is allowed. The vector field must be programmed to * 0 (huh?) * * 011 - RR Delivery mode (?? needs documentation). * * 100 - NMI. Deliver as an NMI to all processors listed in * the destination field. The vector is ignored. Always * treated as edge triggered. * * 101 - INIT. Deliver as an INIT signal to all processors * (like FIXED) according to the ICR. The vector is * ignored and delivery is always edge-triggered. * * 110 - Startup. Send a special message between cpus. The * vector contains a startup address for the MP boot * protocol. Always edge triggered. Note: a startup * interrupt is not automatically tried in case of failure. * * 111 - <reserved> */ #define APIC_VECTOR_MASK 0x000000ff #define APIC_DELMODE_MASK 0x00000700 #define APIC_DELMODE_FIXED 0x00000000 #define APIC_DELMODE_LOWPRIO 0x00000100 #define APIC_DELMODE_SMI 0x00000200 #define APIC_DELMODE_RR 0x00000300 #define APIC_DELMODE_NMI 0x00000400 #define APIC_DELMODE_INIT 0x00000500 #define APIC_DELMODE_STARTUP 0x00000600 #define APIC_DELMODE_RESV7 0x00000700 #define APIC_DESTMODE_MASK 0x00000800 #define APIC_DESTMODE_PHY 0x00000000 #define APIC_DESTMODE_LOG 0x00000800 #define APIC_DELSTAT_MASK 0x00001000 #define APIC_DELSTAT_IDLE 0x00000000 #define APIC_DELSTAT_PEND 0x00001000 #define APIC_LEVEL_MASK 0x00004000 #define APIC_LEVEL_DEASSERT 0x00000000 #define APIC_LEVEL_ASSERT 0x00004000 #define APIC_TRIGMOD_MASK 0x00008000 #define APIC_TRIGMOD_EDGE 0x00000000 #define APIC_TRIGMOD_LEVEL 0x00008000 #define APIC_RRSTAT_MASK 0x00030000 #define APIC_RRSTAT_INVALID 0x00000000 #define APIC_RRSTAT_INPROG 0x00010000 #define APIC_RRSTAT_VALID 0x00020000 #define APIC_RRSTAT_RESV 0x00030000 #define APIC_DEST_MASK 0x000c0000 #define APIC_DEST_DESTFLD 0x00000000 #define APIC_DEST_SELF 0x00040000 #define APIC_DEST_ALLISELF 0x00080000 #define APIC_DEST_ALLESELF 0x000c0000 #define APIC_ICRLO_RESV_MASK 0xfff02000 /* * lapic.icr_hi */ #define APIC_ICRH_ID_MASK APIC_ID_MASK /* * lapic.lvt_timer * lapic.lvt_pcint * lapic.lvt_lint0 * lapic.lvt_lint1 * lapic.lvt_error * * +-----------+--------10-+--FEDCBA98-+-----------+ * 0320 LTIMER | | TM | ---S---- | vector | * 0330 | | | | | * +-----------+--------10-+--FEDCBA98-+-----------+ * 0340 LVPCINT | | -M | ---S-MMM | vector | * 0350 LVINT0 | | -M | LRPS-MMM | vector | * 0360 LVINT1 | | -M | LRPS-MMM | vector | * 0370 LVERROR | | -M | -------- | vector | * +-----------+-----------+-----------+-----------+ * * T: 1 = periodic, 0 = one-shot * (LTIMER only) * * M: 1 = masked * * L: 1 = level, 0 = edge * (LVINT0/1 only) * * R: For level triggered only, set to 1 when a * level int is accepted, cleared by EOI. * (LVINT0/1 only) * * P: Pin Polarity 0 = Active High, 1 = Active Low * (LVINT0/1 only) * * S: 1 = Send Pending. Interrupt has been injected * but APIC has not yet accepted it. * * MMM 000 = Fixed deliver to cpu according to LVT * * MMM 100 = NMI deliver as an NMI. Always edge * * MMM 111 = ExtInt deliver from 8259, routes INTA * bus cycle to external * controller. Controller is * expected to supply vector. * Always level. */ #define APIC_LVT_VECTOR 0x000000ff #define APIC_LVT_DM_MASK 0x00000700 #define APIC_LVT_DM_FIXED 0x00000000 #define APIC_LVT_DM_NMI 0x00000400 #define APIC_LVT_DM_EXTINT 0x00000700 #define APIC_LVT_DS 0x00001000 /* (S) Send Pending */ #define APIC_LVT_POLARITY_MASK 0x00002000 #define APIC_LVT_POLARITY_LO 0x00002000 /* (P) Pin Polarity */ #define APIC_LVT_POLARITY_HI 0x00000000 #define APIC_LVT_LEVELSTATUS 0x00004000 /* (R) level trig status */ #define APIC_LVT_TRIG_MASK 0x00008000 #define APIC_LVT_LEVELTRIG 0x00008000 /* (L) 1 = level, 0 = edge */ #define APIC_LVT_MASKED 0x00010000 /* (M) 1 = masked */ /* * lapic.lvt_timer */ #define APIC_LVTT_VECTOR APIC_LVT_VECTOR #define APIC_LVTT_DS APIC_LVT_DS #define APIC_LVTT_MASKED APIC_LVT_MASKED #define APIC_LVTT_PERIODIC 0x00020000 #define APIC_LVTT_TSCDLT 0x00040000 #define APIC_TIMER_MAX_COUNT 0xffffffff /* * lapic.icr_timer - initial count register (32 bits) * lapic.ccr_timer - current count register (32 bits) */ /* * lapic.dcr_timer - timer divider register * * d0dd * * 0000 - divide by 2 * 0001 - divide by 4 * 0010 - divide by 8 * 0011 - divide by 16 * 1000 - divide by 32 * 1001 - divide by 64 * 1010 - divide by 128 * 1011 - divide by 1 */ #define APIC_TDCR_2 0x00 #define APIC_TDCR_4 0x01 #define APIC_TDCR_8 0x02 #define APIC_TDCR_16 0x03 #define APIC_TDCR_32 0x08 #define APIC_TDCR_64 0x09 #define APIC_TDCR_128 0x0a #define APIC_TDCR_1 0x0b /* * lapic.self_ipi (x2APIC only) */ /* * lapic.ext_feat (AMD only) */ #define APIC_EXTFEAT_MASK 0x00ff0000 #define APIC_EXTFEAT_SHIFT 16 #define APIC_EXTFEAT_EXTID_CAP 0x00000004 #define APIC_EXTFEAT_SEIO_CAP 0x00000002 #define APIC_EXTFEAT_IER_CAP 0x00000001 /* * lapic.ext_ctrl * lapic.ext_seoi * lapic.ext_ier{0-7} */ /* * lapic.ext_lvt[N].lvt */ #define APIC_EXTLVT_IBS 0 /* Instruction based sampling */ #define APIC_EXTLVT_MCA 1 /* MCE thresholding */ #define APIC_EXTLVT_DEI 2 /* Deferred error interrupt */ #define APIC_EXTLVT_SBI 3 /* Sideband interface */ /****************************************************************************** * I/O APIC defines */ /* default physical locations of an IO APIC */ #define DEFAULT_IO_APIC_BASE 0xfec00000 /* window register offset */ #define IOAPIC_WINDOW 0x10 /* * indexes into IO APIC (index into array of 32 bit entities) */ #define IOAPIC_ID 0x00 #define IOAPIC_VER 0x01 #define IOAPIC_ARB 0x02 #define IOAPIC_REDTBL 0x10 #define IOAPIC_REDTBL0 IOAPIC_REDTBL #define IOAPIC_REDTBL1 (IOAPIC_REDTBL+0x02) #define IOAPIC_REDTBL2 (IOAPIC_REDTBL+0x04) #define IOAPIC_REDTBL3 (IOAPIC_REDTBL+0x06) #define IOAPIC_REDTBL4 (IOAPIC_REDTBL+0x08) #define IOAPIC_REDTBL5 (IOAPIC_REDTBL+0x0a) #define IOAPIC_REDTBL6 (IOAPIC_REDTBL+0x0c) #define IOAPIC_REDTBL7 (IOAPIC_REDTBL+0x0e) #define IOAPIC_REDTBL8 (IOAPIC_REDTBL+0x10) #define IOAPIC_REDTBL9 (IOAPIC_REDTBL+0x12) #define IOAPIC_REDTBL10 (IOAPIC_REDTBL+0x14) #define IOAPIC_REDTBL11 (IOAPIC_REDTBL+0x16) #define IOAPIC_REDTBL12 (IOAPIC_REDTBL+0x18) #define IOAPIC_REDTBL13 (IOAPIC_REDTBL+0x1a) #define IOAPIC_REDTBL14 (IOAPIC_REDTBL+0x1c) #define IOAPIC_REDTBL15 (IOAPIC_REDTBL+0x1e) #define IOAPIC_REDTBL16 (IOAPIC_REDTBL+0x20) #define IOAPIC_REDTBL17 (IOAPIC_REDTBL+0x22) #define IOAPIC_REDTBL18 (IOAPIC_REDTBL+0x24) #define IOAPIC_REDTBL19 (IOAPIC_REDTBL+0x26) #define IOAPIC_REDTBL20 (IOAPIC_REDTBL+0x28) #define IOAPIC_REDTBL21 (IOAPIC_REDTBL+0x2a) #define IOAPIC_REDTBL22 (IOAPIC_REDTBL+0x2c) #define IOAPIC_REDTBL23 (IOAPIC_REDTBL+0x2e) /* fields in VER */ #define IOART_VER_VERSION 0x000000ff #define IOART_VER_MAXREDIR 0x00ff0000 #define MAXREDIRSHIFT 16 /* * fields in the IO APIC's redirection table entries */ /* * High 32 bit word. The high 8 bits contain the destination field. * * If this entry is set up for Physical Mode, bits 59:56 (the low 4 bits * of the 8 bit destination field) contain an APIC ID. * * If this entry is set up for Logical Mode, the destination field potentially * defines a set of processors. Bits 63:56 (all 8 bits) specify the logical * destination address. * * Current we use IOART_HI_DEST_BROADCAST to broadcast to all LAPICs */ #define IOART_HI_DEST_MASK APIC_ID_MASK #define IOART_HI_DEST_RESV ~APIC_ID_MASK #define IOART_HI_DEST_BROADCAST IOART_HI_DEST_MASK #define IOART_HI_DEST_SHIFT 24 /* * Low 32 bit word */ #define IOART_RESV 0x00fe0000 /* reserved */ /* * Interrupt mask bit. If 1 the interrupt is masked. An edge sensitive * interrupt which is masked will be lost. */ #define IOART_INTMASK 0x00010000 /* R/W: INTerrupt mask */ #define IOART_INTMCLR 0x00000000 /* clear, allow INTs */ #define IOART_INTMSET 0x00010000 /* set, inhibit INTs */ /* * Select trigger mode. */ #define IOART_TRGRMOD 0x00008000 /* R/W: trigger mode */ #define IOART_TRGREDG 0x00000000 /* edge */ #define IOART_TRGRLVL 0x00008000 /* level */ /* * Remote IRR. Only applies to level triggered interrupts, this bit * is set to 1 when the IOAPIC has delivered a level triggered interrupt * to a local APIC. It is cleared when the LAPIC EOI's the interrupt. * This field is read-only. */ #define IOART_REM_IRR 0x00004000 /* RO: remote IRR */ /* * Select interrupt pin polarity */ #define IOART_INTPOL 0x00002000 /* R/W: INT input pin polarity */ #define IOART_INTAHI 0x00000000 /* active high */ #define IOART_INTALO 0x00002000 /* active low */ /* * Delivery Status (read only). 0 = no interrupt pending, 1 = interrupt * pending for tranmission to an LAPIC. Note that this bit does not * indicate whether the interrupt has been processed or is undergoing * processing by a cpu. */ #define IOART_DELIVS 0x00001000 /* RO: delivery status */ /* * Destination mode. * * In physical mode the destination APIC is identified by its ID. * Bits 56-63 specify the 8 bit APIC ID. * * In logical mode destinations are identified by matching on the logical * destination under the control of the destination format register and * logical destination register in each local APIC. * */ #define IOART_DESTMOD 0x00000800 /* R/W: destination mode */ #define IOART_DESTPHY 0x00000000 /* physical */ #define IOART_DESTLOG 0x00000800 /* logical */ /* * Delivery mode. * * 000 Fixed Deliver the signal on the INTR signal for * all processor core's LAPICs listed in the * destination. The trigger mode may be * edge or level. * * 001 Lowest Pri Deliver to the processor core whos LAPIC * is operating at the lowest priority (TPR). * The trigger mode may be edge or level. * * 010 SMI System management interrupt. the vector * information is ignored but must be programmed * to all zero's for future compatibility. * Must be edge triggered. * * 011 Reserved * * 100 NMI Deliver on the NMI signal for all cpu cores * listed in the destination. Vector information * is ignored. NMIs are treated as edge triggered * interrupts even if programmed as level * triggered. For proper operation the pin must * be programmed as an edge trigger. * * 101 INIT Deliver to all processor cores listed in * the destination by asserting their INIT signal. * All addressed LAPICs will assume their INIT * state. Always treated as edge-triggered even * if programmed as level. For proper operation * the pin must be programed as an edge trigger. * * 110 Reserved * * 111 ExINT Deliver as an INTR signal to all processor * cores listed in the destination as an * interrupt originating in an externally * connected interrupt controller. * The INTA cycle corresponding to this ExINT * will be routed to the external controller * that is expected to supply the vector. * Must be edge triggered. * */ #define IOART_DELMOD 0x00000700 /* R/W: delivery mode */ #define IOART_DELFIXED 0x00000000 /* fixed */ #define IOART_DELLOPRI 0x00000100 /* lowest priority */ #define IOART_DELSMI 0x00000200 /* System Management INT */ #define IOART_DELRSV1 0x00000300 /* reserved */ #define IOART_DELNMI 0x00000400 /* NMI signal */ #define IOART_DELINIT 0x00000500 /* INIT signal */ #define IOART_DELRSV2 0x00000600 /* reserved */ #define IOART_DELEXINT 0x00000700 /* External INTerrupt */ /* * The interrupt vector. Valid values range from 0x10 to 0xFE. */ #define IOART_INTVEC 0x000000ff /* R/W: INTerrupt vector field */ #endif /* _MACHINE_APIC_H_ */
