/* * This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. * * $FreeBSD$ */ #ifndef _VIRTIO_NET_H #define _VIRTIO_NET_H #include <sys/types.h> /* The feature bitmap for virtio net */ #define VIRTIO_NET_F_CSUM 0x00001 /* Host handles pkts w/ partial csum */ #define VIRTIO_NET_F_GUEST_CSUM 0x00002 /* Guest handles pkts w/ partial csum*/ #define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 0x00004 /* Guest can do dynamic * offloads state configuration */ #define VIRTIO_NET_F_MAC 0x00020 /* Host has given MAC address. */ #define VIRTIO_NET_F_GSO 0x00040 /* Host handles pkts w/ any GSO type */ #define VIRTIO_NET_F_GUEST_TSO4 0x00080 /* Guest can handle TSOv4 in. */ #define VIRTIO_NET_F_GUEST_TSO6 0x00100 /* Guest can handle TSOv6 in. */ #define VIRTIO_NET_F_GUEST_ECN 0x00200 /* Guest can handle TSO[6] w/ ECN in.*/ #define VIRTIO_NET_F_GUEST_UFO 0x00400 /* Guest can handle UFO in. */ #define VIRTIO_NET_F_HOST_TSO4 0x00800 /* Host can handle TSOv4 in. */ #define VIRTIO_NET_F_HOST_TSO6 0x01000 /* Host can handle TSOv6 in. */ #define VIRTIO_NET_F_HOST_ECN 0x02000 /* Host can handle TSO[6] w/ ECN in. */ #define VIRTIO_NET_F_HOST_UFO 0x04000 /* Host can handle UFO in. */ #define VIRTIO_NET_F_MRG_RXBUF 0x08000 /* Host can merge receive buffers. */ #define VIRTIO_NET_F_STATUS 0x10000 /* virtio_net_config.status available*/ #define VIRTIO_NET_F_CTRL_VQ 0x20000 /* Control channel available */ #define VIRTIO_NET_F_CTRL_RX 0x40000 /* Control channel RX mode support */ #define VIRTIO_NET_F_CTRL_VLAN 0x80000 /* Control channel VLAN filtering */ #define VIRTIO_NET_F_CTRL_RX_EXTRA 0x100000 /* Extra RX mode control support */ #define VIRTIO_NET_F_GUEST_ANNOUNCE 0x200000 /* Guest can announce device on the * network */ #define VIRTIO_NET_F_MQ 0x400000 /* Device supports Receive Flow * Steering */ #define VIRTIO_NET_F_CTRL_MAC_ADDR 0x800000 /* Set MAC address */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ struct virtio_net_config { /* The config defining mac address (if VIRTIO_NET_F_MAC) */ uint8_t mac[ETHER_ADDR_LEN]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ uint16_t status; /* Maximum number of each of transmit and receive queues; * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ. * Legal values are between 1 and 0x8000 */ uint16_t max_virtqueue_pairs; } __packed; /* * This is the first element of the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. */ struct virtio_net_hdr { #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start,csum_offset*/ uint8_t flags; #define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */ #define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */ #define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */ #define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */ #define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */ uint8_t gso_type; uint16_t hdr_len; /* Ethernet + IP + tcp/udp hdrs */ uint16_t gso_size; /* Bytes to append to hdr_len per frame */ uint16_t csum_start; /* Position to start checksumming from */ uint16_t csum_offset; /* Offset after that to place checksum */ }; /* * This is the version of the header to use when the MRG_RXBUF * feature has been negotiated. */ struct virtio_net_hdr_mrg_rxbuf { struct virtio_net_hdr hdr; uint16_t num_buffers; /* Number of merged rx buffers */ }; /* * Control virtqueue data structures * * The control virtqueue expects a header in the first sg entry * and an ack/status response in the last entry. Data for the * command goes in between. */ struct virtio_net_ctrl_hdr { uint8_t class; uint8_t cmd; } __packed; typedef uint8_t virtio_net_ctrl_ack; #define VIRTIO_NET_OK 0 #define VIRTIO_NET_ERR 1 /* * Control the RX mode, ie. promiscuous, allmulti, etc... * All commands require an "out" sg entry containing a 1 byte * state value, zero = disable, non-zero = enable. Commands * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. */ #define VIRTIO_NET_CTRL_RX 0 #define VIRTIO_NET_CTRL_RX_PROMISC 0 #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 #define VIRTIO_NET_CTRL_RX_ALLUNI 2 #define VIRTIO_NET_CTRL_RX_NOMULTI 3 #define VIRTIO_NET_CTRL_RX_NOUNI 4 #define VIRTIO_NET_CTRL_RX_NOBCAST 5 /* * Control the MAC filter table. * * The MAC filter table is managed by the hypervisor, the guest should * assume the size is infinite. Filtering should be considered * non-perfect, ie. based on hypervisor resources, the guest may * received packets from sources not specified in the filter list. * * In addition to the class/cmd header, the TABLE_SET command requires * two out scatterlists. Each contains a 4 byte count of entries followed * by a concatenated byte stream of the ETH_ALEN MAC addresses. The * first sg list contains unicast addresses, the second is for multicast. * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature * is available. */ struct virtio_net_ctrl_mac { uint32_t entries; uint8_t macs[][ETHER_ADDR_LEN]; } __packed; #define VIRTIO_NET_CTRL_MAC 1 #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1 /* * Control VLAN filtering * * The VLAN filter table is controlled via a simple ADD/DEL interface. * VLAN IDs not added may be filtered by the hypervisor. Del is the * opposite of add. Both commands expect an out entry containing a 2 * byte VLAN ID. VLAN filtering is available with the * VIRTIO_NET_F_CTRL_VLAN feature bit. */ #define VIRTIO_NET_CTRL_VLAN 2 #define VIRTIO_NET_CTRL_VLAN_ADD 0 #define VIRTIO_NET_CTRL_VLAN_DEL 1 /* * Control link announce acknowledgement * * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that * driver has recevied the notification; device would clear the * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives * this command. */ #define VIRTIO_NET_CTRL_ANNOUNCE 3 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 /* * Control Receive Flow Steering * * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET * enables Receive Flow Steering, specifying the number of the transmit and * receive queues that will be used. After the command is consumed and acked by * the device, the device will not steer new packets on receive virtqueues * other than specified nor read from transmit virtqueues other than specified. * Accordingly, driver should not transmit new packets on virtqueues other than * specified. */ struct virtio_net_ctrl_mq { uint16_t virtqueue_pairs; }; #define VIRTIO_NET_CTRL_MQ 4 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000 #endif /* _VIRTIO_NET_H */
