/*-
 * Copyright (c) 2003-2007 Nate Lawson
 * Copyright (c) 2000 Michael Smith
 * Copyright (c) 2000 BSDi
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD: head/sys/dev/acpica/acpi_ec.c 246128 2013-01-30 18:01:20Z sbz $
 */

#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/ktr.h>

#include "acpi.h"
#include "accommon.h"

#include <dev/acpica/acpivar.h>

/* Hooks for the ACPICA debugging infrastructure */
#define _COMPONENT      ACPI_EC
ACPI_MODULE_NAME("EC")

#define rebooting 0

/*
 * EC_COMMAND:
 * -----------
 */
typedef UINT8                           EC_COMMAND;

#define EC_COMMAND_UNKNOWN              ((EC_COMMAND) 0x00)
#define EC_COMMAND_READ                 ((EC_COMMAND) 0x80)
#define EC_COMMAND_WRITE                ((EC_COMMAND) 0x81)
#define EC_COMMAND_BURST_ENABLE         ((EC_COMMAND) 0x82)
#define EC_COMMAND_BURST_DISABLE        ((EC_COMMAND) 0x83)
#define EC_COMMAND_QUERY                ((EC_COMMAND) 0x84)

/*
 * EC_STATUS:
 * ----------
 * The encoding of the EC status register is illustrated below.
 * Note that a set bit (1) indicates the property is TRUE
 * (e.g. if bit 0 is set then the output buffer is full).
 * +-+-+-+-+-+-+-+-+
 * |7|6|5|4|3|2|1|0|
 * +-+-+-+-+-+-+-+-+
 *  | | | | | | | |
 *  | | | | | | | +- Output Buffer Full?
 *  | | | | | | +--- Input Buffer Full?
 *  | | | | | +----- <reserved>
 *  | | | | +------- Data Register is Command Byte?
 *  | | | +--------- Burst Mode Enabled?
 *  | | +----------- SCI Event?
 *  | +------------- SMI Event?
 *  +--------------- <reserved>
 *
 */
typedef UINT8                           EC_STATUS;

#define EC_FLAG_OUTPUT_BUFFER           ((EC_STATUS) 0x01)
#define EC_FLAG_INPUT_BUFFER            ((EC_STATUS) 0x02)
#define EC_FLAG_DATA_IS_CMD             ((EC_STATUS) 0x08)
#define EC_FLAG_BURST_MODE              ((EC_STATUS) 0x10)

/*
 * EC_EVENT:
 * ---------
 */
typedef UINT8                           EC_EVENT;

#define EC_EVENT_UNKNOWN                ((EC_EVENT) 0x00)
#define EC_EVENT_OUTPUT_BUFFER_FULL     ((EC_EVENT) 0x01)
#define EC_EVENT_INPUT_BUFFER_EMPTY     ((EC_EVENT) 0x02)
#define EC_EVENT_SCI                    ((EC_EVENT) 0x20)
#define EC_EVENT_SMI                    ((EC_EVENT) 0x40)

/* Data byte returned after burst enable indicating it was successful. */
#define EC_BURST_ACK                    0x90

/*
 * Register access primitives
 */
#define EC_GET_DATA(sc)                                                 \
        bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0)

#define EC_SET_DATA(sc, v)                                              \
        bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v))

#define EC_GET_CSR(sc)                                                  \
        bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0)

#define EC_SET_CSR(sc, v)                                               \
        bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v))

/* Additional params to pass from the probe routine */
struct acpi_ec_params {
    int         glk;
    int         gpe_bit;
    ACPI_HANDLE gpe_handle;
    int         uid;
};

/*
 * Driver softc.
 */
struct acpi_ec_softc {
    device_t            ec_dev;
    ACPI_HANDLE         ec_handle;
    int                 ec_uid;
    ACPI_HANDLE         ec_gpehandle;
    UINT8               ec_gpebit;

    int                 ec_data_rid;
    struct resource     *ec_data_res;
    bus_space_tag_t     ec_data_tag;
    bus_space_handle_t  ec_data_handle;

    int                 ec_csr_rid;
    struct resource     *ec_csr_res;
    bus_space_tag_t     ec_csr_tag;
    bus_space_handle_t  ec_csr_handle;

    int                 ec_glk;
    int                 ec_glkhandle;
    int                 ec_burstactive;
    int                 ec_sci_pend;
    volatile u_int      ec_gencount;
    int                 ec_suspending;
};

/*
 * XXX njl
 * I couldn't find it in the spec but other implementations also use a
 * value of 1 ms for the time to acquire global lock.
 */
#define EC_LOCK_TIMEOUT 1000

/* Default delay in microseconds between each run of the status polling loop. */
#define EC_POLL_DELAY   50

/* Total time in ms spent waiting for a response from EC. */
#define EC_TIMEOUT              750
#define EC_TIMEOUT_BACKOFF      100

#define EVENT_READY(event, status)                      \
        (((event) == EC_EVENT_OUTPUT_BUFFER_FULL &&     \
         ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) ||    \
         ((event) == EC_EVENT_INPUT_BUFFER_EMPTY &&     \
         ((status) & EC_FLAG_INPUT_BUFFER) == 0))

ACPI_SERIAL_DECL(ec, "ACPI embedded controller");

extern int acpi_silence_all;

static SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, CTLFLAG_RD, NULL, "EC debugging");

static int      ec_burst_mode;
TUNABLE_INT("debug.acpi.ec.burst", &ec_burst_mode);
SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RW, &ec_burst_mode, 0,
    "Enable use of burst mode (faster for nearly all systems)");
static int      ec_polled_mode;
TUNABLE_INT("debug.acpi.ec.polled", &ec_polled_mode);
SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RW, &ec_polled_mode, 0,
    "Force use of polled mode (only if interrupt mode doesn't work)");
static int      ec_timeout = EC_TIMEOUT;
TUNABLE_INT("debug.acpi.ec.timeout", &ec_timeout);
SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RW, &ec_timeout,
    EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)");
static int      ec_timeout_backoff = EC_TIMEOUT_BACKOFF;
TUNABLE_INT("debug.acpi.ec.timeout_backoff", &ec_timeout_backoff);
SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout_backoff, CTLFLAG_RW,
        &ec_timeout_backoff, EC_TIMEOUT_BACKOFF,
        "Total time spent retrying for a response (poll+sleep) in case of failure");
static int      ec_auto_silence = 10;   /* silence after 10 errors */
TUNABLE_INT("debug.acpi.ec.auto_silence", &ec_auto_silence);
SYSCTL_INT(_debug_acpi_ec, OID_AUTO, auto_silence, CTLFLAG_RW,
        &ec_auto_silence, 1,
        "Auto-silence ACPI messages after x retries in case of failure");

#ifndef KTR_ACPI_EC
#define KTR_ACPI_EC     KTR_ALL
#endif

KTR_INFO_MASTER(acpi_ec);
KTR_INFO(KTR_ACPI_EC, acpi_ec, burstdis, 0,
    "ec burst disabled in waitevent (%s)", const char *msg);
KTR_INFO(KTR_ACPI_EC, acpi_ec, burstdisok, 1,
    "ec disabled burst ok");
KTR_INFO(KTR_ACPI_EC, acpi_ec, burstenl, 2,
    "ec burst enabled");
KTR_INFO(KTR_ACPI_EC, acpi_ec, cmdrun, 3,
    "ec running command %#hhx", EC_COMMAND cmd);
KTR_INFO(KTR_ACPI_EC, acpi_ec, gpehdlstart, 4,
    "ec gpe handler start");
KTR_INFO(KTR_ACPI_EC, acpi_ec, gpequeuehdl, 5,
    "ec gpe queueing query handler");
KTR_INFO(KTR_ACPI_EC, acpi_ec, gperun, 6,
    "ec running gpe handler directly");
KTR_INFO(KTR_ACPI_EC, acpi_ec, qryoknotrun, 7,
    "ec query ok, not running _Q%02hhX", uint8_t Data);
KTR_INFO(KTR_ACPI_EC, acpi_ec, qryokrun, 8,
    "ec query ok, running _Q%02hhX", uint8_t Data);
KTR_INFO(KTR_ACPI_EC, acpi_ec, readaddr, 9,
    "ec read from %#hhx", UINT8 Address);
KTR_INFO(KTR_ACPI_EC, acpi_ec, timeout, 10,
    "error: ec wait timed out");
KTR_INFO(KTR_ACPI_EC, acpi_ec, waitrdy, 11,
    "ec %s wait ready, status %#hhx", const char *msg, EC_STATUS ec_status);
KTR_INFO(KTR_ACPI_EC, acpi_ec, writeaddr, 12,
    "ec write to %#hhx, data %#hhx", UINT8 Address, UINT8 Data);

static ACPI_STATUS
EcLock(struct acpi_ec_softc *sc)
{
    ACPI_STATUS status;

    /* If _GLK is non-zero, acquire the global lock. */
    status = AE_OK;
    if (sc->ec_glk) {
        status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle);
        if (ACPI_FAILURE(status))
            return (status);
    }
    ACPI_SERIAL_BEGIN(ec);
    return (status);
}

static void
EcUnlock(struct acpi_ec_softc *sc)
{
    ACPI_SERIAL_END(ec);
    if (sc->ec_glk)
        AcpiReleaseGlobalLock(sc->ec_glkhandle);
}

static UINT32           EcGpeHandler(ACPI_HANDLE GpeDevice,
                                UINT32 GpeNumber, void *Context);
static ACPI_STATUS      EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function,
                                void *Context, void **return_Context);
static ACPI_STATUS      EcSpaceHandler(UINT32 Function,
                                ACPI_PHYSICAL_ADDRESS Address,
                                UINT32 Width, UINT64 *Value,
                                void *Context, void *RegionContext);
static ACPI_STATUS      EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event,
                                u_int gen_count);
static ACPI_STATUS      EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd);
static ACPI_STATUS      EcRead(struct acpi_ec_softc *sc, UINT8 Address,
                                UINT8 *Data);
static ACPI_STATUS      EcWrite(struct acpi_ec_softc *sc, UINT8 Address,
                                UINT8 Data);
static int              acpi_ec_probe(device_t dev);
static int              acpi_ec_attach(device_t dev);
static int              acpi_ec_suspend(device_t dev);
static int              acpi_ec_resume(device_t dev);
static int              acpi_ec_shutdown(device_t dev);
static int              acpi_ec_read_method(device_t dev, u_int addr,
                                UINT64 *val, int width);
static int              acpi_ec_write_method(device_t dev, u_int addr,
                                UINT64 val, int width);

static device_method_t acpi_ec_methods[] = {
    /* Device interface */
    DEVMETHOD(device_probe,     acpi_ec_probe),
    DEVMETHOD(device_attach,    acpi_ec_attach),
    DEVMETHOD(device_suspend,   acpi_ec_suspend),
    DEVMETHOD(device_resume,    acpi_ec_resume),
    DEVMETHOD(device_shutdown,  acpi_ec_shutdown),

    /* Embedded controller interface */
    DEVMETHOD(acpi_ec_read,     acpi_ec_read_method),
    DEVMETHOD(acpi_ec_write,    acpi_ec_write_method),

    DEVMETHOD_END
};

static driver_t acpi_ec_driver = {
    "acpi_ec",
    acpi_ec_methods,
    sizeof(struct acpi_ec_softc),
    .gpri = KOBJ_GPRI_ACPI
};

static devclass_t acpi_ec_devclass;
DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, acpi_ec_devclass, NULL, NULL);
MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1);

/*
 * Look for an ECDT and if we find one, set up default GPE and
 * space handlers to catch attempts to access EC space before
 * we have a real driver instance in place.
 *
 * TODO: Some old Gateway laptops need us to fake up an ECDT or
 * otherwise attach early so that _REG methods can run.
 */
void
acpi_ec_ecdt_probe(device_t parent)
{
    ACPI_TABLE_ECDT *ecdt;
    ACPI_STATUS      status;
    device_t         child;
    ACPI_HANDLE      h;
    struct acpi_ec_params *params;

    ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);

    /* Find and validate the ECDT. */
    status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt);
    if (ACPI_FAILURE(status) ||
        ecdt->Control.BitWidth != 8 ||
        ecdt->Data.BitWidth != 8) {
        return;
    }

    /* Create the child device with the given unit number. */
    child = BUS_ADD_CHILD(parent, parent, 0, "acpi_ec", ecdt->Uid);
    if (child == NULL) {
        kprintf("%s: can't add child\n", __func__);
        return;
    }

    /* Find and save the ACPI handle for this device. */
    status = AcpiGetHandle(NULL, ecdt->Id, &h);
    if (ACPI_FAILURE(status)) {
        device_delete_child(parent, child);
        kprintf("%s: can't get handle\n", __func__);
        return;
    }
    acpi_set_handle(child, h);

    /* Set the data and CSR register addresses. */
    bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address,
        /*count*/1, -1);
    bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address,
        /*count*/1, -1);

    /*
     * Store values for the probe/attach routines to use.  Store the
     * ECDT GPE bit and set the global lock flag according to _GLK.
     * Note that it is not perfectly correct to be evaluating a method
     * before initializing devices, but in practice this function
     * should be safe to call at this point.
     */
    params = kmalloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO);
    params->gpe_handle = NULL;
    params->gpe_bit = ecdt->Gpe;
    params->uid = ecdt->Uid;
    acpi_GetInteger(h, "_GLK", &params->glk);
    acpi_set_private(child, params);

    /* Finish the attach process. */
    if (device_probe_and_attach(child) != 0)
        device_delete_child(parent, child);
}

static int
acpi_ec_probe(device_t dev)
{
    ACPI_BUFFER buf;
    ACPI_HANDLE h;
    ACPI_OBJECT *obj;
    ACPI_STATUS status;
    device_t    peer;
    char        desc[64];
    int         ecdt;
    int         ret;
    struct acpi_ec_params *params;
    static char *ec_ids[] = { "PNP0C09", NULL };

    /* Check that this is a device and that EC is not disabled. */
    if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec"))
        return (ENXIO);

    /*
     * If probed via ECDT, set description and continue.  Otherwise,
     * we can access the namespace and make sure this is not a
     * duplicate probe.
     */
    ret = ENXIO;
    ecdt = 0;
    buf.Pointer = NULL;
    buf.Length = ACPI_ALLOCATE_BUFFER;
    params = acpi_get_private(dev);
    if (params != NULL) {
        ecdt = 1;
        ret = 0;
    } else if (ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids)) {
        params = kmalloc(sizeof(struct acpi_ec_params), M_TEMP,
                        M_WAITOK | M_ZERO);
        h = acpi_get_handle(dev);

        /*
         * Read the unit ID to check for duplicate attach and the
         * global lock value to see if we should acquire it when
         * accessing the EC.
         */
        status = acpi_GetInteger(h, "_UID", &params->uid);
        if (ACPI_FAILURE(status))
            params->uid = 0;
        status = acpi_GetInteger(h, "_GLK", &params->glk);
        if (ACPI_FAILURE(status))
            params->glk = 0;

        /*
         * Evaluate the _GPE method to find the GPE bit used by the EC to
         * signal status (SCI).  If it's a package, it contains a reference
         * and GPE bit, similar to _PRW.
         */
        status = AcpiEvaluateObject(h, "_GPE", NULL, &buf);
        if (ACPI_FAILURE(status)) {
            device_printf(dev, "can't evaluate _GPE - %s\n",
                          AcpiFormatException(status));
            goto out;
        }
        obj = (ACPI_OBJECT *)buf.Pointer;
        if (obj == NULL)
            goto out;

        switch (obj->Type) {
        case ACPI_TYPE_INTEGER:
            params->gpe_handle = NULL;
            params->gpe_bit = obj->Integer.Value;
            break;
        case ACPI_TYPE_PACKAGE:
            if (!ACPI_PKG_VALID(obj, 2))
                goto out;
            params->gpe_handle =
                acpi_GetReference(NULL, &obj->Package.Elements[0]);
            if (params->gpe_handle == NULL ||
                acpi_PkgInt32(obj, 1, &params->gpe_bit) != 0)
                goto out;
            break;
        default:
            device_printf(dev, "_GPE has invalid type %d\n", obj->Type);
            goto out;
        }

        /* Store the values we got from the namespace for attach. */
        acpi_set_private(dev, params);

        /*
         * Check for a duplicate probe.  This can happen when a probe
         * via ECDT succeeded already.  If this is a duplicate, disable
         * this device.
         */
        peer = devclass_get_device(acpi_ec_devclass, params->uid);
        if (peer == NULL || !device_is_alive(peer))
            ret = 0;
        else
            device_disable(dev);
    }

out:
    if (ret == 0) {
        ksnprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s",
                 params->gpe_bit, (params->glk) ? ", GLK" : "",
                 ecdt ? ", ECDT" : "");
        device_set_desc_copy(dev, desc);
    }

    if (ret > 0 && params)
        kfree(params, M_TEMP);
    if (buf.Pointer)
        AcpiOsFree(buf.Pointer);
    return (ret);
}

static int
acpi_ec_attach(device_t dev)
{
    struct acpi_ec_softc        *sc;
    struct acpi_ec_params       *params;
    ACPI_STATUS                 Status;

    ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);

    /* Fetch/initialize softc (assumes softc is pre-zeroed). */
    sc = device_get_softc(dev);
    params = acpi_get_private(dev);
    sc->ec_dev = dev;
    sc->ec_handle = acpi_get_handle(dev);
    ACPI_SERIAL_INIT(ec);

    /* Retrieve previously probed values via device ivars. */
    sc->ec_glk = params->glk;
    sc->ec_gpebit = params->gpe_bit;
    sc->ec_gpehandle = params->gpe_handle;
    sc->ec_uid = params->uid;
    sc->ec_suspending = FALSE;
    acpi_set_private(dev, NULL);
    kfree(params, M_TEMP);

    /* Attach bus resources for data and command/status ports. */
    sc->ec_data_rid = 0;
    sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
                        &sc->ec_data_rid, RF_ACTIVE);
    if (sc->ec_data_res == NULL) {
        device_printf(dev, "can't allocate data port\n");
        goto error;
    }
    sc->ec_data_tag = rman_get_bustag(sc->ec_data_res);
    sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res);

    sc->ec_csr_rid = 1;
    sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
                        &sc->ec_csr_rid, RF_ACTIVE);
    if (sc->ec_csr_res == NULL) {
        device_printf(dev, "can't allocate command/status port\n");
        goto error;
    }
    sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res);
    sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res);

    /*
     * Install a handler for this EC's GPE bit.  We want edge-triggered
     * behavior.
     */
    ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n"));
    Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit,
                ACPI_GPE_EDGE_TRIGGERED, EcGpeHandler, sc);
    if (ACPI_FAILURE(Status)) {
        device_printf(dev, "can't install GPE handler for %s - %s\n",
                      acpi_name(sc->ec_handle), AcpiFormatException(Status));
        goto error;
    }

    /*
     * Install address space handler
     */
    ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n"));
    Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
                &EcSpaceHandler, &EcSpaceSetup, sc);
    if (ACPI_FAILURE(Status)) {
        device_printf(dev, "can't install address space handler for %s - %s\n",
                      acpi_name(sc->ec_handle), AcpiFormatException(Status));
        goto error;
    }

    /* Enable runtime GPEs for the handler. */
    Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit);
    if (ACPI_FAILURE(Status)) {
        device_printf(dev, "AcpiEnableGpe failed: %s\n",
                      AcpiFormatException(Status));
        goto error;
    }

    ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n"));
    return (0);

error:
    AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, EcGpeHandler);
    AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
        EcSpaceHandler);
    if (sc->ec_csr_res)
        bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid,
                             sc->ec_csr_res);
    if (sc->ec_data_res)
        bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid,
                             sc->ec_data_res);
    return (ENXIO);
}

static int
acpi_ec_suspend(device_t dev)
{
    struct acpi_ec_softc        *sc;

    sc = device_get_softc(dev);
    sc->ec_suspending = TRUE;
    return (0);
}

static int
acpi_ec_resume(device_t dev)
{
    struct acpi_ec_softc        *sc;

    sc = device_get_softc(dev);
    sc->ec_suspending = FALSE;
    return (0);
}

static int
acpi_ec_shutdown(device_t dev)
{
    struct acpi_ec_softc        *sc;

    /* Disable the GPE so we don't get EC events during shutdown. */
    sc = device_get_softc(dev);
    AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit);
    return (0);
}

/* Methods to allow other devices (e.g., smbat) to read/write EC space. */
static int
acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width)
{
    struct acpi_ec_softc *sc;
    ACPI_STATUS status;

    sc = device_get_softc(dev);
    status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL);
    if (ACPI_FAILURE(status))
        return (ENXIO);
    return (0);
}

static int
acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width)
{
    struct acpi_ec_softc *sc;
    ACPI_STATUS status;

    sc = device_get_softc(dev);
    status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL);
    if (ACPI_FAILURE(status))
        return (ENXIO);
    return (0);
}

static ACPI_STATUS
EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event)
{
    ACPI_STATUS status;
    EC_STATUS ec_status;

    status = AE_NO_HARDWARE_RESPONSE;
    ec_status = EC_GET_CSR(sc);
    if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) {
        KTR_LOG(acpi_ec_burstdis, msg);
        sc->ec_burstactive = FALSE;
    }
    if (EVENT_READY(event, ec_status)) {
        KTR_LOG(acpi_ec_waitrdy, msg, ec_status);
        status = AE_OK;
    }
    return (status);
}

static void
EcGpeQueryHandler(void *Context)
{
    struct acpi_ec_softc        *sc = (struct acpi_ec_softc *)Context;
    UINT8                       Data;
    ACPI_STATUS                 Status;
    int                         retry, sci_enqueued;
    char                        qxx[5];

    ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
    KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL"));

    /* Serialize user access with EcSpaceHandler(). */
    Status = EcLock(sc);
    if (ACPI_FAILURE(Status)) {
        device_printf(sc->ec_dev, "GpeQuery lock error: %s\n",
            AcpiFormatException(Status));
        return;
    }

    /*
     * Send a query command to the EC to find out which _Qxx call it
     * wants to make.  This command clears the SCI bit and also the
     * interrupt source since we are edge-triggered.  To prevent the GPE
     * that may arise from running the query from causing another query
     * to be queued, we clear the pending flag only after running it.
     */
    sci_enqueued = sc->ec_sci_pend;
    for (retry = 0; retry < 2; retry++) {
        Status = EcCommand(sc, EC_COMMAND_QUERY);
        if (ACPI_SUCCESS(Status))
            break;
        if (ACPI_SUCCESS(EcCheckStatus(sc, "retr_check",
            EC_EVENT_INPUT_BUFFER_EMPTY)))
            continue;
        else
            break;
    }
    sc->ec_sci_pend = FALSE;
    if (ACPI_FAILURE(Status)) {
        EcUnlock(sc);
        device_printf(sc->ec_dev, "GPE query failed: %s\n",
            AcpiFormatException(Status));
        return;
    }
    Data = EC_GET_DATA(sc);

    /*
     * We have to unlock before running the _Qxx method below since that
     * method may attempt to read/write from EC address space, causing
     * recursive acquisition of the lock.
     */
    EcUnlock(sc);

    /* Ignore the value for "no outstanding event". (13.3.5) */
    if (Data == 0) {
        KTR_LOG(acpi_ec_qryoknotrun, Data);
        return;
    } else {
        KTR_LOG(acpi_ec_qryokrun, Data);
    }

    /* Evaluate _Qxx to respond to the controller. */
    ksnprintf(qxx, sizeof(qxx), "_Q%02X", Data);
    AcpiUtStrupr(qxx);
    Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL);
    if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) {
        device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n",
            qxx, AcpiFormatException(Status));
    }

    /* Reenable runtime GPE if its execution was deferred. */
    if (sci_enqueued) {
        Status = AcpiFinishGpe(sc->ec_gpehandle, sc->ec_gpebit);
        if (ACPI_FAILURE(Status))
            device_printf(sc->ec_dev, "reenabling runtime GPE failed: %s\n",
                AcpiFormatException(Status));
    }
}

/*
 * The GPE handler is called when IBE/OBF or SCI events occur.  We are
 * called from an unknown lock context.
 */
static UINT32
EcGpeHandler(ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context)
{
    struct acpi_ec_softc *sc = Context;
    ACPI_STATUS                Status;
    EC_STATUS                  EcStatus;

    KASSERT(Context != NULL, ("EcGpeHandler called with NULL"));
    KTR_LOG(acpi_ec_gpehdlstart);
    /*
     * Notify EcWaitEvent() that the status register is now fresh.  If we
     * didn't do this, it wouldn't be possible to distinguish an old IBE
     * from a new one, for example when doing a write transaction (writing
     * address and then data values.)
     */
    atomic_add_int(&sc->ec_gencount, 1);
    wakeup(sc);

    /*
     * If the EC_SCI bit of the status register is set, queue a query handler.
     * It will run the query and _Qxx method later, under the lock.
     */
    EcStatus = EC_GET_CSR(sc);
    if ((EcStatus & EC_EVENT_SCI) && !sc->ec_sci_pend) {
        KTR_LOG(acpi_ec_gpequeuehdl);
        Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context);
        if (ACPI_SUCCESS(Status)) {
            sc->ec_sci_pend = TRUE;
            return (0);
        } else {
            kprintf("EcGpeHandler: queuing GPE query handler failed\n");
        }
    }
    return (ACPI_REENABLE_GPE);
}

static ACPI_STATUS
EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context,
             void **RegionContext)
{

    ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);

    /*
     * If deactivating a region, always set the output to NULL.  Otherwise,
     * just pass the context through.
     */
    if (Function == ACPI_REGION_DEACTIVATE)
        *RegionContext = NULL;
    else
        *RegionContext = Context;

    return_ACPI_STATUS (AE_OK);
}

static ACPI_STATUS
EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width,
               UINT64 *Value, void *Context, void *RegionContext)
{
    struct acpi_ec_softc        *sc = (struct acpi_ec_softc *)Context;
    ACPI_PHYSICAL_ADDRESS       EcAddr;
    UINT8                       *EcData;
    ACPI_STATUS                 Status;

    ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address);

    if (Function != ACPI_READ && Function != ACPI_WRITE)
        return_ACPI_STATUS (AE_BAD_PARAMETER);
    if (Width % 8 != 0 || Value == NULL || Context == NULL)
        return_ACPI_STATUS (AE_BAD_PARAMETER);
    if (Address + Width / 8 > 256)
        return_ACPI_STATUS (AE_BAD_ADDRESS);

    /*
     * If booting, check if we need to run the query handler.  If so, we
     * we call it directly here since our thread taskq is not active yet.
     */
    if (cold || rebooting || sc->ec_suspending) {
        if ((EC_GET_CSR(sc) & EC_EVENT_SCI)) {
            KTR_LOG(acpi_ec_gperun);
            EcGpeQueryHandler(sc);
        }
    }

    /* Serialize with EcGpeQueryHandler() at transaction granularity. */
    Status = EcLock(sc);
    if (ACPI_FAILURE(Status))
        return_ACPI_STATUS (Status);

    /* If we can't start burst mode, continue anyway. */
    Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE);
    if (ACPI_SUCCESS(Status)) {
        if (EC_GET_DATA(sc) == EC_BURST_ACK) {
            KTR_LOG(acpi_ec_burstenl);
            sc->ec_burstactive = TRUE;
        }
    }

    /* Perform the transaction(s), based on Width. */
    EcAddr = Address;
    EcData = (UINT8 *)Value;
    if (Function == ACPI_READ)
        *Value = 0;
    do {
        switch (Function) {
        case ACPI_READ:
            Status = EcRead(sc, EcAddr, EcData);
            break;
        case ACPI_WRITE:
            Status = EcWrite(sc, EcAddr, *EcData);
            break;
        }
        if (ACPI_FAILURE(Status))
            break;
        EcAddr++;
        EcData++;
    } while (EcAddr < Address + Width / 8);

    if (sc->ec_burstactive) {
        sc->ec_burstactive = FALSE;
        if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE)))
            KTR_LOG(acpi_ec_burstdisok);
    }

    EcUnlock(sc);
    return_ACPI_STATUS (Status);
}

static ACPI_STATUS
EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count)
{
    static int  no_intr = 0;
    ACPI_STATUS Status;
    int         count, i, need_poll, slp_ival;

    ACPI_SERIAL_ASSERT(ec);
    Status = AE_NO_HARDWARE_RESPONSE;
    need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending;

    /* Wait for event by polling or GPE (interrupt). */
    if (need_poll) {
        count = (ec_timeout * 1000) / EC_POLL_DELAY;
        if (count == 0)
            count = 1;
        DELAY(10);
        for (i = 0; i < count; i++) {
            Status = EcCheckStatus(sc, "poll", Event);
            if (ACPI_SUCCESS(Status))
                break;
            DELAY(EC_POLL_DELAY);
        }
    } else {
        slp_ival = hz / 1000;
        if (slp_ival != 0) {
            count = ec_timeout;
        } else {
            /* hz has less than 1 ms resolution so scale timeout. */
            slp_ival = 1;
            count = ec_timeout / (1000 / hz);
        }

        /*
         * Wait for the GPE to signal the status changed, checking the
         * status register each time we get one.  It's possible to get a
         * GPE for an event we're not interested in here (i.e., SCI for
         * EC query).
         */
        for (i = 0; i < count; i++) {
            if (gen_count == sc->ec_gencount)
                tsleep(sc, 0, "ecgpe", slp_ival);
            /*
             * Record new generation count.  It's possible the GPE was
             * just to notify us that a query is needed and we need to
             * wait for a second GPE to signal the completion of the
             * event we are actually waiting for.
             */
            Status = EcCheckStatus(sc, "sleep", Event);
            if (ACPI_SUCCESS(Status)) {
                if (gen_count == sc->ec_gencount)
                    no_intr++;
                else
                    no_intr = 0;
                break;
            }
            gen_count = sc->ec_gencount;
        }

        /*
         * We finished waiting for the GPE and it never arrived.  Try to
         * read the register once and trust whatever value we got.  This is
         * the best we can do at this point.
         */
        if (ACPI_FAILURE(Status))
            Status = EcCheckStatus(sc, "sleep_end", Event);
    }
    if (!need_poll && no_intr > 10) {
        device_printf(sc->ec_dev,
            "not getting interrupts, switched to polled mode\n");
        ec_polled_mode = 1;
    }
    if (ACPI_FAILURE(Status)) {
        ec_timeout = ec_timeout_backoff;
        if (ec_auto_silence > 0) {
            if (--ec_auto_silence <= 0)
                acpi_silence_all = 1;
        }
        KTR_LOG(acpi_ec_timeout);
    }
    return (Status);
}

static ACPI_STATUS
EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd)
{
    ACPI_STATUS status;
    EC_EVENT    event;
    EC_STATUS   ec_status;
    u_int       gen_count;

    ACPI_SERIAL_ASSERT(ec);

    /* Don't use burst mode if user disabled it. */
    if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE)
        return (AE_ERROR);

    /* Decide what to wait for based on command type. */
    switch (cmd) {
    case EC_COMMAND_READ:
    case EC_COMMAND_WRITE:
    case EC_COMMAND_BURST_DISABLE:
        event = EC_EVENT_INPUT_BUFFER_EMPTY;
        break;
    case EC_COMMAND_QUERY:
    case EC_COMMAND_BURST_ENABLE:
        event = EC_EVENT_OUTPUT_BUFFER_FULL;
        break;
    default:
        device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd);
        return (AE_BAD_PARAMETER);
    }

    /*
     * Ensure empty input buffer before issuing command.
     * Use generation count of zero to force a quick check.
     */
    status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0);
    if (ACPI_FAILURE(status))
        return (status);

    /* Run the command and wait for the chosen event. */
    KTR_LOG(acpi_ec_cmdrun, cmd);
    gen_count = sc->ec_gencount;
    EC_SET_CSR(sc, cmd);
    status = EcWaitEvent(sc, event, gen_count);
    if (ACPI_SUCCESS(status)) {
        /* If we succeeded, burst flag should now be present. */
        if (cmd == EC_COMMAND_BURST_ENABLE) {
            ec_status = EC_GET_CSR(sc);
            if ((ec_status & EC_FLAG_BURST_MODE) == 0)
                status = AE_ERROR;
        }
    } else
        device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd);
    return (status);
}

static ACPI_STATUS
EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data)
{
    ACPI_STATUS status;
    u_int gen_count;
    int retry;

    ACPI_SERIAL_ASSERT(ec);
    KTR_LOG(acpi_ec_readaddr, Address);

    for (retry = 0; retry < 2; retry++) {
        status = EcCommand(sc, EC_COMMAND_READ);
        if (ACPI_FAILURE(status))
            return (status);

        gen_count = sc->ec_gencount;
        EC_SET_DATA(sc, Address);
        status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count);
        if (ACPI_FAILURE(status)) {
            if (ACPI_SUCCESS(EcCheckStatus(sc, "retr_check",
                EC_EVENT_INPUT_BUFFER_EMPTY)))
                continue;
            else
                break;
        }
        *Data = EC_GET_DATA(sc);
        return (AE_OK);
    }
    device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n");
    return (status);
}

static ACPI_STATUS
EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data)
{
    ACPI_STATUS status;
    u_int gen_count;

    ACPI_SERIAL_ASSERT(ec);
    KTR_LOG(acpi_ec_writeaddr, Address, Data);

    status = EcCommand(sc, EC_COMMAND_WRITE);
    if (ACPI_FAILURE(status))
        return (status);

    gen_count = sc->ec_gencount;
    EC_SET_DATA(sc, Address);
    status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
    if (ACPI_FAILURE(status)) {
        device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n");
        return (status);
    }

    gen_count = sc->ec_gencount;
    EC_SET_DATA(sc, Data);
    status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
    if (ACPI_FAILURE(status)) {
        device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n");
        return (status);
    }

    return (AE_OK);
}