/*
 * Copyright © 2015 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 */

#include <linux/kernel.h>

#include <drm/drmP.h>
#include <drm/i915_drm.h>

#include "i915_drv.h"
#include "intel_drv.h"

/**
 * DOC: Hotplug
 *
 * Simply put, hotplug occurs when a display is connected to or disconnected
 * from the system. However, there may be adapters and docking stations and
 * Display Port short pulses and MST devices involved, complicating matters.
 *
 * Hotplug in i915 is handled in many different levels of abstraction.
 *
 * The platform dependent interrupt handling code in i915_irq.c enables,
 * disables, and does preliminary handling of the interrupts. The interrupt
 * handlers gather the hotplug detect (HPD) information from relevant registers
 * into a platform independent mask of hotplug pins that have fired.
 *
 * The platform independent interrupt handler intel_hpd_irq_handler() in
 * intel_hotplug.c does hotplug irq storm detection and mitigation, and passes
 * further processing to appropriate bottom halves (Display Port specific and
 * regular hotplug).
 *
 * The Display Port work function i915_digport_work_func() calls into
 * intel_dp_hpd_pulse() via hooks, which handles DP short pulses and DP MST long
 * pulses, with failures and non-MST long pulses triggering regular hotplug
 * processing on the connector.
 *
 * The regular hotplug work function i915_hotplug_work_func() calls connector
 * detect hooks, and, if connector status changes, triggers sending of hotplug
 * uevent to userspace via drm_kms_helper_hotplug_event().
 *
 * Finally, the userspace is responsible for triggering a modeset upon receiving
 * the hotplug uevent, disabling or enabling the crtc as needed.
 *
 * The hotplug interrupt storm detection and mitigation code keeps track of the
 * number of interrupts per hotplug pin per a period of time, and if the number
 * of interrupts exceeds a certain threshold, the interrupt is disabled for a
 * while before being re-enabled. The intention is to mitigate issues raising
 * from broken hardware triggering massive amounts of interrupts and grinding
 * the system to a halt.
 *
 * Current implementation expects that hotplug interrupt storm will not be
 * seen when display port sink is connected, hence on platforms whose DP
 * callback is handled by i915_digport_work_func reenabling of hpd is not
 * performed (it was never expected to be disabled in the first place ;) )
 * this is specific to DP sinks handled by this routine and any other display
 * such as HDMI or DVI enabled on the same port will have proper logic since
 * it will use i915_hotplug_work_func where this logic is handled.
 */

/**
 * intel_hpd_pin_default - return default pin associated with certain port.
 * @dev_priv: private driver data pointer
 * @port: the hpd port to get associated pin
 *
 * It is only valid and used by digital port encoder.
 *
 * Return pin that is associatade with @port and HDP_NONE if no pin is
 * hard associated with that @port.
 */
enum hpd_pin intel_hpd_pin_default(struct drm_i915_private *dev_priv,
                                   enum port port)
{
        switch (port) {
        case PORT_A:
                return HPD_PORT_A;
        case PORT_B:
                return HPD_PORT_B;
        case PORT_C:
                return HPD_PORT_C;
        case PORT_D:
                return HPD_PORT_D;
        case PORT_E:
                return HPD_PORT_E;
        case PORT_F:
                if (IS_CNL_WITH_PORT_F(dev_priv))
                        return HPD_PORT_E;
                return HPD_PORT_F;
        default:
                MISSING_CASE(port);
                return HPD_NONE;
        }
}

#define HPD_STORM_DETECT_PERIOD         1000
#define HPD_STORM_REENABLE_DELAY        (2 * 60 * 1000)

/**
 * intel_hpd_irq_storm_detect - gather stats and detect HPD irq storm on a pin
 * @dev_priv: private driver data pointer
 * @pin: the pin to gather stats on
 *
 * Gather stats about HPD irqs from the specified @pin, and detect irq
 * storms. Only the pin specific stats and state are changed, the caller is
 * responsible for further action.
 *
 * The number of irqs that are allowed within @HPD_STORM_DETECT_PERIOD is
 * stored in @dev_priv->hotplug.hpd_storm_threshold which defaults to
 * @HPD_STORM_DEFAULT_THRESHOLD. If this threshold is exceeded, it's
 * considered an irq storm and the irq state is set to @HPD_MARK_DISABLED.
 *
 * The HPD threshold can be controlled through i915_hpd_storm_ctl in debugfs,
 * and should only be adjusted for automated hotplug testing.
 *
 * Return true if an irq storm was detected on @pin.
 */
static bool intel_hpd_irq_storm_detect(struct drm_i915_private *dev_priv,
                                       enum hpd_pin pin)
{
        unsigned long start = dev_priv->hotplug.stats[pin].last_jiffies;
        unsigned long end = start + msecs_to_jiffies(HPD_STORM_DETECT_PERIOD);
        const int threshold = dev_priv->hotplug.hpd_storm_threshold;
        bool storm = false;

        if (!time_in_range(jiffies, start, end)) {
                dev_priv->hotplug.stats[pin].last_jiffies = jiffies;
                dev_priv->hotplug.stats[pin].count = 0;
                DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: 0\n", pin);
        } else if (dev_priv->hotplug.stats[pin].count > threshold &&
                   threshold) {
                dev_priv->hotplug.stats[pin].state = HPD_MARK_DISABLED;
                DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", pin);
                storm = true;
        } else {
                dev_priv->hotplug.stats[pin].count++;
                DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: %d\n", pin,
                              dev_priv->hotplug.stats[pin].count);
        }

        return storm;
}

static void intel_hpd_irq_storm_disable(struct drm_i915_private *dev_priv)
{
        struct drm_device *dev = &dev_priv->drm;
        struct intel_connector *intel_connector;
        struct intel_encoder *intel_encoder;
        struct drm_connector *connector;
        struct drm_connector_list_iter conn_iter;
        enum hpd_pin pin;
        bool hpd_disabled = false;

        lockdep_assert_held(&dev_priv->irq_lock);

        drm_connector_list_iter_begin(dev, &conn_iter);
        drm_for_each_connector_iter(connector, &conn_iter) {
                if (connector->polled != DRM_CONNECTOR_POLL_HPD)
                        continue;

                intel_connector = to_intel_connector(connector);
                intel_encoder = intel_connector->encoder;
                if (!intel_encoder)
                        continue;

                pin = intel_encoder->hpd_pin;
                if (pin == HPD_NONE ||
                    dev_priv->hotplug.stats[pin].state != HPD_MARK_DISABLED)
                        continue;

                DRM_INFO("HPD interrupt storm detected on connector %s: "
                         "switching from hotplug detection to polling\n",
                         connector->name);

                dev_priv->hotplug.stats[pin].state = HPD_DISABLED;
                connector->polled = DRM_CONNECTOR_POLL_CONNECT
                        | DRM_CONNECTOR_POLL_DISCONNECT;
                hpd_disabled = true;
        }
        drm_connector_list_iter_end(&conn_iter);

        /* Enable polling and queue hotplug re-enabling. */
        if (hpd_disabled) {
                drm_kms_helper_poll_enable(dev);
                mod_delayed_work(system_wq, &dev_priv->hotplug.reenable_work,
                                 msecs_to_jiffies(HPD_STORM_REENABLE_DELAY));
        }
}

static void intel_hpd_irq_storm_reenable_work(struct work_struct *work)
{
        struct drm_i915_private *dev_priv =
                container_of(work, typeof(*dev_priv),
                             hotplug.reenable_work.work);
        struct drm_device *dev = &dev_priv->drm;
        enum hpd_pin pin;

        intel_runtime_pm_get(dev_priv);

        spin_lock_irq(&dev_priv->irq_lock);
        for_each_hpd_pin(pin) {
                struct drm_connector *connector;
                struct drm_connector_list_iter conn_iter;

                if (dev_priv->hotplug.stats[pin].state != HPD_DISABLED)
                        continue;

                dev_priv->hotplug.stats[pin].state = HPD_ENABLED;

                drm_connector_list_iter_begin(dev, &conn_iter);
                drm_for_each_connector_iter(connector, &conn_iter) {
                        struct intel_connector *intel_connector = to_intel_connector(connector);

                        /* Don't check MST ports, they don't have pins */
                        if (!intel_connector->mst_port &&
                            intel_connector->encoder->hpd_pin == pin) {
                                if (connector->polled != intel_connector->polled)
                                        DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
                                                         connector->name);
                                connector->polled = intel_connector->polled;
                                if (!connector->polled)
                                        connector->polled = DRM_CONNECTOR_POLL_HPD;
                        }
                }
                drm_connector_list_iter_end(&conn_iter);
        }
        if (dev_priv->display_irqs_enabled && dev_priv->display.hpd_irq_setup)
                dev_priv->display.hpd_irq_setup(dev_priv);
        spin_unlock_irq(&dev_priv->irq_lock);

        intel_runtime_pm_put(dev_priv);
}

bool intel_encoder_hotplug(struct intel_encoder *encoder,
                           struct intel_connector *connector)
{
        struct drm_device *dev = connector->base.dev;
        enum drm_connector_status old_status;

        WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
        old_status = connector->base.status;

        connector->base.status =
                drm_helper_probe_detect(&connector->base, NULL, false);

        if (old_status == connector->base.status)
                return false;

        DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
                      connector->base.base.id,
                      connector->base.name,
                      drm_get_connector_status_name(old_status),
                      drm_get_connector_status_name(connector->base.status));

        return true;
}

static bool intel_encoder_has_hpd_pulse(struct intel_encoder *encoder)
{
        return intel_encoder_is_dig_port(encoder) &&
                enc_to_dig_port(&encoder->base)->hpd_pulse != NULL;
}

static void i915_digport_work_func(struct work_struct *work)
{
        struct drm_i915_private *dev_priv =
                container_of(work, struct drm_i915_private, hotplug.dig_port_work);
        u32 long_port_mask, short_port_mask;
        struct intel_encoder *encoder;
        u32 old_bits = 0;

        spin_lock_irq(&dev_priv->irq_lock);
        long_port_mask = dev_priv->hotplug.long_port_mask;
        dev_priv->hotplug.long_port_mask = 0;
        short_port_mask = dev_priv->hotplug.short_port_mask;
        dev_priv->hotplug.short_port_mask = 0;
        spin_unlock_irq(&dev_priv->irq_lock);

        for_each_intel_encoder(&dev_priv->drm, encoder) {
                struct intel_digital_port *dig_port;
                enum port port = encoder->port;
                bool long_hpd, short_hpd;
                enum irqreturn ret;

                if (!intel_encoder_has_hpd_pulse(encoder))
                        continue;

                long_hpd = long_port_mask & BIT(port);
                short_hpd = short_port_mask & BIT(port);

                if (!long_hpd && !short_hpd)
                        continue;

                dig_port = enc_to_dig_port(&encoder->base);

                ret = dig_port->hpd_pulse(dig_port, long_hpd);
                if (ret == IRQ_NONE) {
                        /* fall back to old school hpd */
                        old_bits |= BIT(encoder->hpd_pin);
                }
        }

        if (old_bits) {
                spin_lock_irq(&dev_priv->irq_lock);
                dev_priv->hotplug.event_bits |= old_bits;
                spin_unlock_irq(&dev_priv->irq_lock);
                schedule_work(&dev_priv->hotplug.hotplug_work);
        }
}

/*
 * Handle hotplug events outside the interrupt handler proper.
 */
static void i915_hotplug_work_func(struct work_struct *work)
{
        struct drm_i915_private *dev_priv =
                container_of(work, struct drm_i915_private, hotplug.hotplug_work);
        struct drm_device *dev = &dev_priv->drm;
        struct intel_connector *intel_connector;
        struct intel_encoder *intel_encoder;
        struct drm_connector *connector;
        struct drm_connector_list_iter conn_iter;
        bool changed = false;
        u32 hpd_event_bits;

        mutex_lock(&dev->mode_config.mutex);
        DRM_DEBUG_KMS("running encoder hotplug functions\n");

        spin_lock_irq(&dev_priv->irq_lock);

        hpd_event_bits = dev_priv->hotplug.event_bits;
        dev_priv->hotplug.event_bits = 0;

        /* Disable hotplug on connectors that hit an irq storm. */
        intel_hpd_irq_storm_disable(dev_priv);

        spin_unlock_irq(&dev_priv->irq_lock);

        drm_connector_list_iter_begin(dev, &conn_iter);
        drm_for_each_connector_iter(connector, &conn_iter) {
                intel_connector = to_intel_connector(connector);
                if (!intel_connector->encoder)
                        continue;
                intel_encoder = intel_connector->encoder;
                if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
                        DRM_DEBUG_KMS("Connector %s (pin %i) received hotplug event.\n",
                                      connector->name, intel_encoder->hpd_pin);

                        changed |= intel_encoder->hotplug(intel_encoder,
                                                          intel_connector);
                }
        }
        drm_connector_list_iter_end(&conn_iter);
        mutex_unlock(&dev->mode_config.mutex);

        if (changed)
                drm_kms_helper_hotplug_event(dev);
}


/**
 * intel_hpd_irq_handler - main hotplug irq handler
 * @dev_priv: drm_i915_private
 * @pin_mask: a mask of hpd pins that have triggered the irq
 * @long_mask: a mask of hpd pins that may be long hpd pulses
 *
 * This is the main hotplug irq handler for all platforms. The platform specific
 * irq handlers call the platform specific hotplug irq handlers, which read and
 * decode the appropriate registers into bitmasks about hpd pins that have
 * triggered (@pin_mask), and which of those pins may be long pulses
 * (@long_mask). The @long_mask is ignored if the port corresponding to the pin
 * is not a digital port.
 *
 * Here, we do hotplug irq storm detection and mitigation, and pass further
 * processing to appropriate bottom halves.
 */
void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
                           u32 pin_mask, u32 long_mask)
{
        struct intel_encoder *encoder;
        bool storm_detected = false;
        bool queue_dig = false, queue_hp = false;
        u32 long_hpd_pulse_mask = 0;
        u32 short_hpd_pulse_mask = 0;
        enum hpd_pin pin;

        if (!pin_mask)
                return;

        lockmgr(&dev_priv->irq_lock, LK_EXCLUSIVE);

        /*
         * Determine whether ->hpd_pulse() exists for each pin, and
         * whether we have a short or a long pulse. This is needed
         * as each pin may have up to two encoders (HDMI and DP) and
         * only the one of them (DP) will have ->hpd_pulse().
         */
        for_each_intel_encoder(&dev_priv->drm, encoder) {
                bool has_hpd_pulse = intel_encoder_has_hpd_pulse(encoder);
                enum port port = encoder->port;
                bool long_hpd;

                pin = encoder->hpd_pin;
                if (!(BIT(pin) & pin_mask))
                        continue;

                if (!has_hpd_pulse)
                        continue;

                long_hpd = long_mask & BIT(pin);

                DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", port_name(port),
                                 long_hpd ? "long" : "short");
                queue_dig = true;

                if (long_hpd) {
                        long_hpd_pulse_mask |= BIT(pin);
                        dev_priv->hotplug.long_port_mask |= BIT(port);
                } else {
                        short_hpd_pulse_mask |= BIT(pin);
                        dev_priv->hotplug.short_port_mask |= BIT(port);
                }
        }

        /* Now process each pin just once */
        for_each_hpd_pin(pin) {
                bool long_hpd;

                if (!(BIT(pin) & pin_mask))
                        continue;

                if (dev_priv->hotplug.stats[pin].state == HPD_DISABLED) {
                        /*
                         * On GMCH platforms the interrupt mask bits only
                         * prevent irq generation, not the setting of the
                         * hotplug bits itself. So only WARN about unexpected
                         * interrupts on saner platforms.
                         */
                        WARN_ONCE(!HAS_GMCH_DISPLAY(dev_priv),
                                  "Received HPD interrupt on pin %d although disabled\n", pin);
                        continue;
                }

                if (dev_priv->hotplug.stats[pin].state != HPD_ENABLED)
                        continue;

                /*
                 * Delegate to ->hpd_pulse() if one of the encoders for this
                 * pin has it, otherwise let the hotplug_work deal with this
                 * pin directly.
                 */
                if (((short_hpd_pulse_mask | long_hpd_pulse_mask) & BIT(pin))) {
                        long_hpd = long_hpd_pulse_mask & BIT(pin);
                } else {
                        dev_priv->hotplug.event_bits |= BIT(pin);
                        long_hpd = true;
                        queue_hp = true;
                }

                if (!long_hpd)
                        continue;

                if (intel_hpd_irq_storm_detect(dev_priv, pin)) {
                        dev_priv->hotplug.event_bits &= ~BIT(pin);
                        storm_detected = true;
                }
        }

        if (storm_detected && dev_priv->display_irqs_enabled)
                dev_priv->display.hpd_irq_setup(dev_priv);
        lockmgr(&dev_priv->irq_lock, LK_RELEASE);

        /*
         * Our hotplug handler can grab modeset locks (by calling down into the
         * fb helpers). Hence it must not be run on our own dev-priv->wq work
         * queue for otherwise the flush_work in the pageflip code will
         * deadlock.
         */
        if (queue_dig)
                queue_work(dev_priv->hotplug.dp_wq, &dev_priv->hotplug.dig_port_work);
        if (queue_hp)
                schedule_work(&dev_priv->hotplug.hotplug_work);
}

/**
 * intel_hpd_init - initializes and enables hpd support
 * @dev_priv: i915 device instance
 *
 * This function enables the hotplug support. It requires that interrupts have
 * already been enabled with intel_irq_init_hw(). From this point on hotplug and
 * poll request can run concurrently to other code, so locking rules must be
 * obeyed.
 *
 * This is a separate step from interrupt enabling to simplify the locking rules
 * in the driver load and resume code.
 *
 * Also see: intel_hpd_poll_init(), which enables connector polling
 */
void intel_hpd_init(struct drm_i915_private *dev_priv)
{
        int i;

        for_each_hpd_pin(i) {
                dev_priv->hotplug.stats[i].count = 0;
                dev_priv->hotplug.stats[i].state = HPD_ENABLED;
        }

        WRITE_ONCE(dev_priv->hotplug.poll_enabled, false);
        schedule_work(&dev_priv->hotplug.poll_init_work);

        /*
         * Interrupt setup is already guaranteed to be single-threaded, this is
         * just to make the assert_spin_locked checks happy.
         */
        if (dev_priv->display_irqs_enabled && dev_priv->display.hpd_irq_setup) {
                spin_lock_irq(&dev_priv->irq_lock);
                if (dev_priv->display_irqs_enabled)
                        dev_priv->display.hpd_irq_setup(dev_priv);
                spin_unlock_irq(&dev_priv->irq_lock);
        }
}

static void i915_hpd_poll_init_work(struct work_struct *work)
{
        struct drm_i915_private *dev_priv =
                container_of(work, struct drm_i915_private,
                             hotplug.poll_init_work);
        struct drm_device *dev = &dev_priv->drm;
        struct drm_connector *connector;
        struct drm_connector_list_iter conn_iter;
        bool enabled;

        mutex_lock(&dev->mode_config.mutex);

        enabled = READ_ONCE(dev_priv->hotplug.poll_enabled);

        drm_connector_list_iter_begin(dev, &conn_iter);
        drm_for_each_connector_iter(connector, &conn_iter) {
                struct intel_connector *intel_connector =
                        to_intel_connector(connector);
                connector->polled = intel_connector->polled;

                /* MST has a dynamic intel_connector->encoder and it's reprobing
                 * is all handled by the MST helpers. */
                if (intel_connector->mst_port)
                        continue;

                if (!connector->polled && I915_HAS_HOTPLUG(dev_priv) &&
                    intel_connector->encoder->hpd_pin > HPD_NONE) {
                        connector->polled = enabled ?
                                DRM_CONNECTOR_POLL_CONNECT |
                                DRM_CONNECTOR_POLL_DISCONNECT :
                                DRM_CONNECTOR_POLL_HPD;
                }
        }
        drm_connector_list_iter_end(&conn_iter);

        if (enabled)
                drm_kms_helper_poll_enable(dev);

        mutex_unlock(&dev->mode_config.mutex);

        /*
         * We might have missed any hotplugs that happened while we were
         * in the middle of disabling polling
         */
        if (!enabled)
                drm_helper_hpd_irq_event(dev);
}

/**
 * intel_hpd_poll_init - enables/disables polling for connectors with hpd
 * @dev_priv: i915 device instance
 *
 * This function enables polling for all connectors, regardless of whether or
 * not they support hotplug detection. Under certain conditions HPD may not be
 * functional. On most Intel GPUs, this happens when we enter runtime suspend.
 * On Valleyview and Cherryview systems, this also happens when we shut off all
 * of the powerwells.
 *
 * Since this function can get called in contexts where we're already holding
 * dev->mode_config.mutex, we do the actual hotplug enabling in a seperate
 * worker.
 *
 * Also see: intel_hpd_init(), which restores hpd handling.
 */
void intel_hpd_poll_init(struct drm_i915_private *dev_priv)
{
        WRITE_ONCE(dev_priv->hotplug.poll_enabled, true);

        /*
         * We might already be holding dev->mode_config.mutex, so do this in a
         * seperate worker
         * As well, there's no issue if we race here since we always reschedule
         * this worker anyway
         */
        schedule_work(&dev_priv->hotplug.poll_init_work);
}

void intel_hpd_init_work(struct drm_i915_private *dev_priv)
{
        INIT_WORK(&dev_priv->hotplug.hotplug_work, i915_hotplug_work_func);
        INIT_WORK(&dev_priv->hotplug.dig_port_work, i915_digport_work_func);
        INIT_WORK(&dev_priv->hotplug.poll_init_work, i915_hpd_poll_init_work);
        INIT_DELAYED_WORK(&dev_priv->hotplug.reenable_work,
                          intel_hpd_irq_storm_reenable_work);
}

void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
{
        spin_lock_irq(&dev_priv->irq_lock);

        dev_priv->hotplug.long_port_mask = 0;
        dev_priv->hotplug.short_port_mask = 0;
        dev_priv->hotplug.event_bits = 0;

        spin_unlock_irq(&dev_priv->irq_lock);

        cancel_work_sync(&dev_priv->hotplug.dig_port_work);
        cancel_work_sync(&dev_priv->hotplug.hotplug_work);
        cancel_work_sync(&dev_priv->hotplug.poll_init_work);
        cancel_delayed_work_sync(&dev_priv->hotplug.reenable_work);
}

bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
{
        bool ret = false;

        if (pin == HPD_NONE)
                return false;

        spin_lock_irq(&dev_priv->irq_lock);
        if (dev_priv->hotplug.stats[pin].state == HPD_ENABLED) {
                dev_priv->hotplug.stats[pin].state = HPD_DISABLED;
                ret = true;
        }
        spin_unlock_irq(&dev_priv->irq_lock);

        return ret;
}

void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
{
        if (pin == HPD_NONE)
                return;

        spin_lock_irq(&dev_priv->irq_lock);
        dev_priv->hotplug.stats[pin].state = HPD_ENABLED;
        spin_unlock_irq(&dev_priv->irq_lock);
}