/*-
 *****************************************************************
 * Copyright (c) 1996-2000 Distributed Processing Technology Corporation
 * Copyright (c) 2000 Adaptec Corporation.
 * All rights reserved.
 *
 * $FreeBSD: src/sys/dev/asr/i2odpt.h,v 1.6 2005/01/06 01:42:29 imp Exp $
 *
 ****************************************************************/

#if !defined(I2O_DPT_HDR)
#define I2O_DPT_HDR

#define DPT_ORGANIZATION_ID 0x1B        /* For Private Messages */

/*
 *      PrivateMessageFrame.StdMessageFrame.Function = I2O_PRIVATE_MESSAGE
 *      PrivateMessageFrame.XFunctionCode = I2O_SCSI_SCB_EXEC
 */

typedef struct _PRIVATE_SCSI_SCB_EXECUTE_MESSAGE {
    I2O_PRIVATE_MESSAGE_FRAME PrivateMessageFrame;
#   if (defined(sparc) || defined(_DPT_BIG_ENDIAN))
        U32                   TID; /* Upper four bits currently are zero */
#   else
        BF                    TID:16; /* Upper four bits currently are zero */
        /* Command is interpreted by the host */
        BF                    Interpret:1;
        /* if TRUE, deal with Physical Firmware Array information */
        BF                    Physical:1;
        BF                    Reserved1:14;
#   endif
    U8                        CDBLength;
    U8                        Reserved;
    I2O_SCB_FLAGS             SCBFlags;
    U8                        CDB[  I2O_SCSI_CDB_LENGTH  ];
    U32                       ByteCount;
    I2O_SG_ELEMENT            SGL;
} PRIVATE_SCSI_SCB_EXECUTE_MESSAGE, * PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE;

/*
 * Flash access and programming messages
 *      PrivateMessageFrame.StdMessageFrame.Function = I2O_PRIVATE_MESSAGE
 *      PrivateMessageFrame.XFunctionCode = PRIVATE_FLAGS_REGION_*
 *
 *      SIZE    returns the total size of a region of flash
 *      READ    copies a region (or portion thereof) into the buffer specified
 *              by the SGL
 *      WRITE   writes a region (or portion thereof) using the data specified
 *              by the SGL
 *
 * Flash regions
 *
 *      0               operational-mode firmware
 *      1               software (bios/utility)
 *      2               oem nvram defaults
 *      3               hba serial number
 *      4               boot-mode firmware
 *
 * Any combination of RegionOffset and ByteCount can be specified providing
 * they fit within the size of the specified region.
 *
 * Flash messages should be targeted to the Executive TID 0x000
 */

#define PRIVATE_FLASH_REGION_SIZE       0x0100
#define PRIVATE_FLASH_REGION_READ       0x0101
#define PRIVATE_FLASH_REGION_WRITE      0x0102
#define PRIVATE_FLASH_REGION_CRC        0x0103

typedef struct _PRIVATE_FLASH_REGION_MESSAGE {
    I2O_PRIVATE_MESSAGE_FRAME PrivateMessageFrame;
    U32                       FlashRegion;
    U32                       RegionOffset;
    U32                       ByteCount;
    I2O_SG_ELEMENT            SGL;
} PRIVATE_FLASH_REGION_MESSAGE, * PPRIVATE_FLASH_REGION_MESSAGE;

/* DPT Driver Printf message */

#define PRIVATE_DRIVER_PRINTF 0x0200

/* FwPrintFlags */
#define FW_FIRMWARE_FLAGS_NO_HEADER_B   0x00000001 /* Remove date header */

typedef struct _PRIVATE_DRIVER_PRINTF_MESSAGE {

    I2O_PRIVATE_MESSAGE_FRAME   PrivateMessageFrame;

    /* total bytes in PrintBuffer, including header */
    U32                 PrintBufferByteCount;
    /* exact data to be copied into the serial PrintBuffer */
    U8                  PrintBuffer[1];

} PRIVATE_DRIVER_PRINTF_MESSAGE, * PPRIVATE_DRIVER_PRINTF_MESSAGE;

/* DPT Enable Diagnostics message 0x0201 */

#define PRIVATE_DIAG_ENABLE 0x0201

typedef struct _PRIVATE_DIAG_ENABLE_MESSAGE {
        I2O_PRIVATE_MESSAGE_FRAME       PrivateMessageFrame;
} PRIVATE_DIAG_MESSAGE_FRAME, * PPRIVATE_DIAG_MESSAGE_FRAME;

/* DPT Driver Get/Put message */

#define PRIVATE_DRIVER_GET      0x300
#define PRIVATE_DRIVER_PUT      0x301

typedef struct _PRIVATE_DRIVER_GETPUT_MESSAGE
{
        I2O_PRIVATE_MESSAGE_FRAME       PrivateMessageFrame;
        U32                             Offset;
        U32                             ByteCount;
        I2O_SG_ELEMENT                  SGL;
} PRIVATE_DRIVER_GETPUT_MESSAGE, * PPRIVATE_DRIVER_GETPUT_MESSAGE;

/****************************************************************************/

/* DPT Peripheral Device Parameter Groups */

/****************************************************************************/

/* DPT Configuration and Operating Structures and Defines */

#define     I2O_DPT_DEVICE_INFO_GROUP_NO               0x8000

/* - 8000h - DPT Device Information Parameters Group defines */

/* Device Type */

#define I2O_DPT_DEVICE_TYPE_DIRECT        I2O_SCSI_DEVICE_TYPE_DIRECT
#define I2O_DPT_DEVICE_TYPE_SEQUENTIAL    I2O_SCSI_DEVICE_TYPE_SEQUENTIAL
#define I2O_DPT_DEVICE_TYPE_PRINTER       I2O_SCSI_DEVICE_TYPE_PRINTER
#define I2O_DPT_DEVICE_TYPE_PROCESSOR     I2O_SCSI_DEVICE_TYPE_PROCESSOR
#define I2O_DPT_DEVICE_TYPE_WORM          I2O_SCSI_DEVICE_TYPE_WORM
#define I2O_DPT_DEVICE_TYPE_CDROM         I2O_SCSI_DEVICE_TYPE_CDROM
#define I2O_DPT_DEVICE_TYPE_SCANNER       I2O_SCSI_DEVICE_TYPE_SCANNER
#define I2O_DPT_DEVICE_TYPE_OPTICAL       I2O_SCSI_DEVICE_TYPE_OPTICAL
#define I2O_DPT_DEVICE_TYPE_MEDIA_CHANGER I2O_SCSI_DEVICE_TYPE_MEDIA_CHANGER
#define I2O_DPT_DEVICE_TYPE_COMM          I2O_SCSI_DEVICE_TYPE_COMM
#define I2O_DPT_DEVICE_GRAPHICS_1         I2O_SCSI_DEVICE_GRAPHICS_1
#define I2O_DPT_DEVICE_GRAPHICS_2         I2O_SCSI_DEVICE_GRAPHICS_2
#define I2O_DPT_DEVICE_TYPE_ARRAY_CONT    I2O_SCSI_DEVICE_TYPE_ARRAY_CONT
#define I2O_DPT_DEVICE_TYPE_UNKNOWN       I2O_SCSI_DEVICE_TYPE_UNKNOWN

/* Flags */

#define I2O_DPT_PERIPHERAL_TYPE_FLAG      I2O_SCSI_PERIPHERAL_TYPE_FLAG
#define I2O_DPT_PERIPHERAL_TYPE_PARALLEL  I2O_SCSI_PERIPHERAL_TYPE_PARALLEL
#define I2O_DPT_PERIPHERAL_TYPE_SERIAL    I2O_SCSI_PERIPHERAL_TYPE_SERIAL

#define I2O_DPT_RESERVED_FLAG             I2O_SCSI_RESERVED_FLAG

#define I2O_DPT_DISCONNECT_FLAG           I2O_SCSI_DISCONNECT_FLAG
#define I2O_DPT_DISABLE_DISCONNECT        I2O_SCSI_DISABLE_DISCONNECT
#define I2O_DPT_ENABLE_DISCONNECT         I2O_SCSI_ENABLE_DISCONNECT

#define I2O_DPT_MODE_MASK                 I2O_SCSI_MODE_MASK
#define I2O_DPT_MODE_SET_DATA             I2O_SCSI_MODE_SET_DATA
#define I2O_DPT_MODE_SET_DEFAULT          I2O_SCSI_MODE_SET_DEFAULT
#define I2O_DPT_MODE_SET_SAFEST           I2O_SCSI_MODE_SET_SAFEST

#define I2O_DPT_DATA_WIDTH_MASK           I2O_SCSI_DATA_WIDTH_MASK
#define I2O_DPT_DATA_WIDTH_8              I2O_SCSI_DATA_WIDTH_8
#define I2O_DPT_DATA_WIDTH_16             I2O_SCSI_DATA_WIDTH_16
#define I2O_DPT_DATA_WIDTH_32             I2O_SCSI_DATA_WIDTH_32

#define I2O_DPT_SYNC_NEGOTIATION_FLAG     I2O_SCSI_SYNC_NEGOTIATION_FLAG
#define I2O_DPT_DISABLE_SYNC_NEGOTIATION  I2O_SCSI_DISABLE_SYNC_NEGOTIATION
#define I2O_DPT_ENABLE_SYNC_NEGOTIATION   I2O_SCSI_ENABLE_SYNC_NEGOTIATION

/* DPT Device Group 8000h - Device Information Parameter Group */

typedef struct _I2O_DPT_DEVICE_INFO_SCALAR {
    U8          DeviceType;     /* Identical to I2O_SCSI_DEVICE_INFO SCALAR */
    U8          Flags;          /* Identical to I2O_SCSI_DEVICE_INFO SCALAR */
    U16         Bus;
    U32         Identifier;
    U8          LunInfo[8]; /* SCSI-2 8-bit scalar LUN goes into offset 1 */

} I2O_DPT_DEVICE_INFO_SCALAR, *PI2O_DPT_DEVICE_INFO_SCALAR;

#define I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO    0x8000

/* DPT Exec Iop Buffers Group 8000h */

typedef struct _I2O_DPT_EXEC_IOP_BUFFERS_SCALAR {
    U32      SerialOutputOffset;    /* offset from base address to header   */
    U32      SerialOutputSize;      /* size of data buffer in bytes         */
    U32      SerialHeaderSize;      /* size of data buffer header in bytes  */
    U32      SerialFlagsSupported;  /* Mask of debug flags supported        */

} I2O_DPT_EXEC_IOP_BUFFERS_SCALAR, *PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR;


#endif /* I2O_DPT_HDR */