/*
 * (MPSAFE)
 *
 * Copyright (c) 2009 The DragonFly Project.  All rights reserved.
 *
 * This code is derived from software contributed to The DragonFly Project
 * by Matthew Dillon <dillon@backplane.com>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name of The DragonFly Project nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific, prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *
 * Copyright (c) 2007 David Gwynne <dlg@openbsd.org>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 * $OpenBSD: atascsi.c,v 1.64 2009/02/16 21:19:06 miod Exp $
 */
/*
 * Implement each SATA port as its own SCSI bus on CAM.  This way we can
 * implement future port multiplier features as individual devices on the
 * bus.
 *
 * Much of the cdb<->xa conversion code was taken from OpenBSD, the rest
 * was written natively for DragonFly.
 */

#include "sili.h"

static void sili_xpt_action(struct cam_sim *sim, union ccb *ccb);
static void sili_xpt_poll(struct cam_sim *sim);
static void sili_xpt_scsi_disk_io(struct sili_port *ap,
                        struct ata_port *at, union ccb *ccb);
static void sili_xpt_scsi_atapi_io(struct sili_port *ap,
                        struct ata_port *at, union ccb *ccb);
static void sili_xpt_page_inquiry(struct sili_port *ap,
                        struct ata_port *at, union ccb *ccb);

static void sili_ata_complete_disk_rw(struct ata_xfer *xa);
static void sili_ata_complete_disk_synchronize_cache(struct ata_xfer *xa);
static void sili_atapi_complete_cmd(struct ata_xfer *xa);
static void sili_ata_dummy_sense(struct scsi_sense_data *sense_data);
static void sili_ata_atapi_sense(struct ata_fis_d2h *rfis,
                     struct scsi_sense_data *sense_data);

static int sili_cam_probe_disk(struct sili_port *ap, struct ata_port *at);
static int sili_cam_probe_atapi(struct sili_port *ap, struct ata_port *at);
static void sili_ata_dummy_done(struct ata_xfer *xa);
static void ata_fix_identify(struct ata_identify *id);
static int sili_set_xfer(struct sili_port *ap, struct ata_port *atx);
static void sili_cam_rescan(struct sili_port *ap);
static void sili_strip_string(const char **basep, int *lenp);

int
sili_cam_attach(struct sili_port *ap)
{
        struct cam_devq *devq;
        struct cam_sim *sim;
        int error;
        int unit;

        /*
         * We want at least one ccb to be available for error processing
         * so don't let CAM use more then ncmds - 1.
         */
        unit = device_get_unit(ap->ap_sc->sc_dev);
        if (ap->ap_sc->sc_ncmds > 1)
                devq = cam_simq_alloc(ap->ap_sc->sc_ncmds - 1);
        else
                devq = cam_simq_alloc(ap->ap_sc->sc_ncmds);
        if (devq == NULL) {
                return (ENOMEM);
        }

        /*
         * Give the devq enough room to run with 32 max_dev_transactions,
         * but set the overall max tags to 1 until NCQ is negotiated.
         */
        sim = cam_sim_alloc(sili_xpt_action, sili_xpt_poll, "sili",
                           (void *)ap, unit, &ap->ap_sim_lock,
                           32, 1, devq);
        cam_simq_release(devq);
        if (sim == NULL) {
                return (ENOMEM);
        }
        ap->ap_sim = sim;
        sili_os_unlock_port(ap);
        lockmgr(&ap->ap_sim_lock, LK_EXCLUSIVE);
        error = xpt_bus_register(ap->ap_sim, ap->ap_num);
        lockmgr(&ap->ap_sim_lock, LK_RELEASE);
        sili_os_lock_port(ap);
        if (error != CAM_SUCCESS) {
                sili_cam_detach(ap);
                return (EINVAL);
        }
        ap->ap_flags |= AP_F_BUS_REGISTERED;

        if (ap->ap_probe == ATA_PROBE_NEED_IDENT)
                error = sili_cam_probe(ap, NULL);
        else
                error = 0;
        if (error) {
                sili_cam_detach(ap);
                return (EIO);
        }
        ap->ap_flags |= AP_F_CAM_ATTACHED;

        return(0);
}

/*
 * The state of the port has changed.
 *
 * If atx is NULL the physical port has changed state.
 * If atx is non-NULL a particular target behind a PM has changed state.
 *
 * If found is -1 the target state must be queued to a non-interrupt context.
 * (only works with at == NULL).
 *
 * If found is 0 the target was removed.
 * If found is 1 the target was inserted.
 */
void
sili_cam_changed(struct sili_port *ap, struct ata_port *atx, int found)
{
        struct cam_path *tmppath;
        int status;
        int target;

        target = atx ? atx->at_target : CAM_TARGET_WILDCARD;

        if (ap->ap_sim == NULL)
                return;
        if (found == CAM_TARGET_WILDCARD) {
                status = xpt_create_path(&tmppath, NULL,
                                         cam_sim_path(ap->ap_sim),
                                         target, CAM_LUN_WILDCARD);
                if (status != CAM_REQ_CMP)
                        return;
                sili_cam_rescan(ap);
        } else {
                status = xpt_create_path(&tmppath, NULL,
                                         cam_sim_path(ap->ap_sim),
                                         target,
                                         CAM_LUN_WILDCARD);
                if (status != CAM_REQ_CMP)
                        return;
#if 0
                /*
                 * This confuses CAM
                 */
                if (found)
                        xpt_async(AC_FOUND_DEVICE, tmppath, NULL);
                else
                        xpt_async(AC_LOST_DEVICE, tmppath, NULL);
#endif
        }
        xpt_free_path(tmppath);
}

void
sili_cam_detach(struct sili_port *ap)
{
        int error __debugvar;

        if ((ap->ap_flags & AP_F_CAM_ATTACHED) == 0)
                return;
        lockmgr(&ap->ap_sim_lock, LK_EXCLUSIVE);
        if (ap->ap_sim) {
                xpt_freeze_simq(ap->ap_sim, 1);
        }
        if (ap->ap_flags & AP_F_BUS_REGISTERED) {
                error = xpt_bus_deregister(cam_sim_path(ap->ap_sim));
                KKASSERT(error == 0);
                ap->ap_flags &= ~AP_F_BUS_REGISTERED;
        }
        if (ap->ap_sim) {
                cam_sim_free(ap->ap_sim);
                ap->ap_sim = NULL;
        }
        lockmgr(&ap->ap_sim_lock, LK_RELEASE);
        ap->ap_flags &= ~AP_F_CAM_ATTACHED;
}

/*
 * Once the SILI port has been attached we need to probe for a device or
 * devices on the port and setup various options.
 *
 * If at is NULL we are probing the direct-attached device on the port,
 * which may or may not be a port multiplier.
 */
int
sili_cam_probe(struct sili_port *ap, struct ata_port *atx)
{
        struct ata_port *at;
        struct ata_xfer *xa;
        u_int64_t       capacity;
        u_int64_t       capacity_bytes;
        int             model_len;
        int             firmware_len;
        int             serial_len;
        int             error;
        int             devncqdepth;
        int             i;
        const char      *model_id;
        const char      *firmware_id;
        const char      *serial_id;
        const char      *wcstr;
        const char      *rastr;
        const char      *scstr;
        const char      *type;

        error = EIO;

        /*
         * Delayed CAM attachment for initial probe, sim may be NULL
         */
        if (ap->ap_sim == NULL)
                return(0);

        /*
         * A NULL atx indicates a probe of the directly connected device.
         * A non-NULL atx indicates a device connected via a port multiplier.
         * We need to preserve atx for calls to sili_ata_get_xfer().
         *
         * at is always non-NULL.  For directly connected devices we supply
         * an (at) pointing to target 0.
         */
        if (atx == NULL) {
                at = ap->ap_ata;        /* direct attached - device 0 */
                if (ap->ap_type == ATA_PORT_T_PM) {
                        kprintf("%s: Found Port Multiplier\n",
                                ATANAME(ap, atx));
                        return (0);
                }
                at->at_type = ap->ap_type;
        } else {
                at = atx;
                if (atx->at_type == ATA_PORT_T_PM) {
                        kprintf("%s: Bogus device, reducing port count to %d\n",
                                ATANAME(ap, atx), atx->at_target);
                        if (ap->ap_pmcount > atx->at_target)
                                ap->ap_pmcount = atx->at_target;
                        goto err;
                }
        }
        if (ap->ap_type == ATA_PORT_T_NONE)
                goto err;
        if (at->at_type == ATA_PORT_T_NONE)
                goto err;

        /*
         * Issue identify, saving the result
         */
        xa = sili_ata_get_xfer(ap, atx);
        xa->complete = sili_ata_dummy_done;
        xa->data = &at->at_identify;
        xa->datalen = sizeof(at->at_identify);
        xa->flags = ATA_F_READ | ATA_F_PIO | ATA_F_POLL;
        xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;

        switch(at->at_type) {
        case ATA_PORT_T_DISK:
                xa->fis->command = ATA_C_IDENTIFY;
                type = "DISK";
                break;
        case ATA_PORT_T_ATAPI:
                xa->fis->command = ATA_C_ATAPI_IDENTIFY;
                xa->flags |= ATA_F_AUTOSENSE;
                type = "ATAPI";
                break;
        default:
                xa->fis->command = ATA_C_ATAPI_IDENTIFY;
                type = "UNKNOWN(ATAPI?)";
                break;
        }
        xa->fis->features = 0;
        xa->fis->device = 0;
        xa->timeout = 1000;

        if (sili_ata_cmd(xa) != ATA_S_COMPLETE) {
                kprintf("%s: Detected %s device but unable to IDENTIFY\n",
                        ATANAME(ap, atx), type);
                sili_ata_put_xfer(xa);
                goto err;
        }
        sili_ata_put_xfer(xa);

        ata_fix_identify(&at->at_identify);

        /*
         * Read capacity using SATA probe info.
         */
        if (le16toh(at->at_identify.cmdset83) & 0x0400) {
                /* LBA48 feature set supported */
                capacity = 0;
                for (i = 3; i >= 0; --i) {
                        capacity <<= 16;
                        capacity +=
                            le16toh(at->at_identify.addrsecxt[i]);
                }
        } else {
                capacity = le16toh(at->at_identify.addrsec[1]);
                capacity <<= 16;
                capacity += le16toh(at->at_identify.addrsec[0]);
        }
        at->at_capacity = capacity;
        if (atx == NULL)
                ap->ap_probe = ATA_PROBE_GOOD;

        capacity_bytes = capacity * 512;

        /*
         * Negotiate NCQ, throw away any ata_xfer's beyond the negotiated
         * number of slots and limit the number of CAM ccb's to one less
         * so we always have a slot available for recovery.
         *
         * NCQ is not used if ap_ncqdepth is 1 or the host controller does
         * not support it, and in that case the driver can handle extra
         * ccb's.
         *
         * NCQ is currently used only with direct-attached disks.  It is
         * not used with port multipliers or direct-attached ATAPI devices.
         *
         * Remember at least one extra CCB needs to be reserved for the
         * error ccb.
         */
        if ((ap->ap_sc->sc_flags & SILI_F_NCQ) &&
            at->at_type == ATA_PORT_T_DISK &&
            (le16toh(at->at_identify.satacap) & (1 << 8))) {
                at->at_ncqdepth = (le16toh(at->at_identify.qdepth) & 0x1F) + 1;
                devncqdepth = at->at_ncqdepth;
                if (at->at_ncqdepth > ap->ap_sc->sc_ncmds)
                        at->at_ncqdepth = ap->ap_sc->sc_ncmds;
                if (at->at_ncqdepth > 1) {
                        for (i = 0; i < ap->ap_sc->sc_ncmds; ++i) {
                                xa = sili_ata_get_xfer(ap, atx);
                                if (xa->tag < at->at_ncqdepth) {
                                        xa->state = ATA_S_COMPLETE;
                                        sili_ata_put_xfer(xa);
                                }
                        }
                        if (at->at_ncqdepth >= ap->ap_sc->sc_ncmds) {
                                cam_sim_set_max_tags(ap->ap_sim,
                                                     at->at_ncqdepth - 1);
                        }
                }
        } else {
                devncqdepth = 0;
        }

        /*
         * Make the model string a bit more presentable
         */
        for (model_len = 40; model_len; --model_len) {
                if (at->at_identify.model[model_len-1] == ' ')
                        continue;
                if (at->at_identify.model[model_len-1] == 0)
                        continue;
                break;
        }

        model_len = sizeof(at->at_identify.model);
        model_id = at->at_identify.model;
        sili_strip_string(&model_id, &model_len);

        firmware_len = sizeof(at->at_identify.firmware);
        firmware_id = at->at_identify.firmware;
        sili_strip_string(&firmware_id, &firmware_len);

        serial_len = sizeof(at->at_identify.serial);
        serial_id = at->at_identify.serial;
        sili_strip_string(&serial_id, &serial_len);

        /*
         * Generate informatiive strings.
         *
         * NOTE: We do not automatically set write caching, lookahead,
         *       or the security state for ATAPI devices.
         */
        if (at->at_identify.cmdset82 & ATA_IDENTIFY_WRITECACHE) {
                if (at->at_identify.features85 & ATA_IDENTIFY_WRITECACHE)
                        wcstr = "enabled";
                else if (at->at_type == ATA_PORT_T_ATAPI)
                        wcstr = "disabled";
                else
                        wcstr = "enabling";
        } else {
                    wcstr = "notsupp";
        }

        if (at->at_identify.cmdset82 & ATA_IDENTIFY_LOOKAHEAD) {
                if (at->at_identify.features85 & ATA_IDENTIFY_LOOKAHEAD)
                        rastr = "enabled";
                else if (at->at_type == ATA_PORT_T_ATAPI)
                        rastr = "disabled";
                else
                        rastr = "enabling";
        } else {
                    rastr = "notsupp";
        }

        if (at->at_identify.cmdset82 & ATA_IDENTIFY_SECURITY) {
                if (at->at_identify.securestatus & ATA_SECURE_FROZEN)
                        scstr = "frozen";
                else if (at->at_type == ATA_PORT_T_ATAPI)
                        scstr = "unfrozen";
                else if (SiliNoFeatures & (1 << ap->ap_num))
                        scstr = "<disabled>";
                else
                        scstr = "freezing";
        } else {
                    scstr = "notsupp";
        }

        kprintf("%s: Found %s \"%*.*s %*.*s\" serial=\"%*.*s\"\n"
                "%s: tags=%d/%d satacap=%04x satafea=%04x NCQ=%s "
                "capacity=%lld.%02dMB\n",

                ATANAME(ap, atx),
                type,
                model_len, model_len, model_id,
                firmware_len, firmware_len, firmware_id,
                serial_len, serial_len, serial_id,

                ATANAME(ap, atx),
                devncqdepth, ap->ap_sc->sc_ncmds,
                at->at_identify.satacap,
                at->at_identify.satafsup,
                (at->at_ncqdepth > 1 ? "YES" : "NO"),
                (long long)capacity_bytes / (1024 * 1024),
                (int)(capacity_bytes % (1024 * 1024)) * 100 / (1024 * 1024)
        );
        kprintf("%s: f85=%04x f86=%04x f87=%04x WC=%s RA=%s SEC=%s\n",
                ATANAME(ap, atx),
                at->at_identify.features85,
                at->at_identify.features86,
                at->at_identify.features87,
                wcstr,
                rastr,
                scstr
        );

        /*
         * Additional type-specific probing
         */
        switch(at->at_type) {
        case ATA_PORT_T_DISK:
                error = sili_cam_probe_disk(ap, atx);
                break;
        case ATA_PORT_T_ATAPI:
                error = sili_cam_probe_atapi(ap, atx);
                break;
        default:
                error = EIO;
                break;
        }
err:
        if (error) {
                at->at_probe = ATA_PROBE_FAILED;
                if (atx == NULL)
                        ap->ap_probe = at->at_probe;
        } else {
                at->at_probe = ATA_PROBE_GOOD;
                if (atx == NULL)
                        ap->ap_probe = at->at_probe;
        }
        return (error);
}

/*
 * DISK-specific probe after initial ident
 */
static int
sili_cam_probe_disk(struct sili_port *ap, struct ata_port *atx)
{
        struct ata_port *at;
        struct ata_xfer *xa;

        at = atx ? atx : ap->ap_ata;

        /*
         * Set dummy xfer mode
         */
        sili_set_xfer(ap, atx);

        /*
         * Enable write cache if supported
         *
         * NOTE: "WD My Book" external disk devices have a very poor
         *       daughter board between the the ESATA and the HD.  Sending
         *       any ATA_C_SET_FEATURES commands will break the hardware port
         *       with a fatal protocol error.  However, this device also
         *       indicates that WRITECACHE is already on and READAHEAD is
         *       not supported so we avoid the issue.
         */
        if ((at->at_identify.cmdset82 & ATA_IDENTIFY_WRITECACHE) &&
            (at->at_identify.features85 & ATA_IDENTIFY_WRITECACHE) == 0) {
                xa = sili_ata_get_xfer(ap, atx);
                xa->complete = sili_ata_dummy_done;
                xa->fis->command = ATA_C_SET_FEATURES;
                /*xa->fis->features = ATA_SF_WRITECACHE_EN;*/
                xa->fis->features = ATA_SF_LOOKAHEAD_EN;
                xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
                xa->fis->device = 0;
                xa->flags = ATA_F_READ | ATA_F_PIO | ATA_F_POLL;
                xa->timeout = 1000;
                xa->datalen = 0;
                if (sili_ata_cmd(xa) == ATA_S_COMPLETE)
                        at->at_features |= ATA_PORT_F_WCACHE;
                else
                        kprintf("%s: Unable to enable write-caching\n",
                                ATANAME(ap, atx));
                sili_ata_put_xfer(xa);
        }

        /*
         * Enable readahead if supported
         */
        if ((at->at_identify.cmdset82 & ATA_IDENTIFY_LOOKAHEAD) &&
            (at->at_identify.features85 & ATA_IDENTIFY_LOOKAHEAD) == 0) {
                xa = sili_ata_get_xfer(ap, atx);
                xa->complete = sili_ata_dummy_done;
                xa->fis->command = ATA_C_SET_FEATURES;
                xa->fis->features = ATA_SF_LOOKAHEAD_EN;
                xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
                xa->fis->device = 0;
                xa->flags = ATA_F_READ | ATA_F_PIO | ATA_F_POLL;
                xa->timeout = 1000;
                xa->datalen = 0;
                if (sili_ata_cmd(xa) == ATA_S_COMPLETE)
                        at->at_features |= ATA_PORT_F_RAHEAD;
                else
                        kprintf("%s: Unable to enable read-ahead\n",
                                ATANAME(ap, atx));
                sili_ata_put_xfer(xa);
        }

        /*
         * FREEZE LOCK the device so malicious users can't lock it on us.
         * As there is no harm in issuing this to devices that don't
         * support the security feature set we just send it, and don't bother
         * checking if the device sends a command abort to tell us it doesn't
         * support it
         */
        if ((at->at_identify.cmdset82 & ATA_IDENTIFY_SECURITY) &&
            (at->at_identify.securestatus & ATA_SECURE_FROZEN) == 0 &&
            (SiliNoFeatures & (1 << ap->ap_num)) == 0) {
                xa = sili_ata_get_xfer(ap, atx);
                xa->complete = sili_ata_dummy_done;
                xa->fis->command = ATA_C_SEC_FREEZE_LOCK;
                xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
                xa->flags = ATA_F_READ | ATA_F_PIO | ATA_F_POLL;
                xa->timeout = 1000;
                xa->datalen = 0;
                if (sili_ata_cmd(xa) == ATA_S_COMPLETE)
                        at->at_features |= ATA_PORT_F_FRZLCK;
                else
                        kprintf("%s: Unable to set security freeze\n",
                                ATANAME(ap, atx));
                sili_ata_put_xfer(xa);
        }

        return (0);
}

/*
 * ATAPI-specific probe after initial ident
 */
static int
sili_cam_probe_atapi(struct sili_port *ap, struct ata_port *atx)
{
        sili_set_xfer(ap, atx);
        return(0);
}

/*
 * Setting the transfer mode is irrelevant for the SATA transport
 * but some (atapi) devices seem to need it anyway.  In addition
 * if we are running through a SATA->PATA converter for some reason
 * beyond my comprehension we might have to set the mode.
 *
 * We only support DMA modes for SATA attached devices, so don't bother
 * with legacy modes.
 */
static int
sili_set_xfer(struct sili_port *ap, struct ata_port *atx)
{
        struct ata_port *at;
        struct ata_xfer *xa;
        u_int16_t mode;
        u_int16_t mask;

        at = atx ? atx : ap->ap_ata;

        /*
         * Figure out the supported UDMA mode.  Ignore other legacy modes.
         */
        mask = le16toh(at->at_identify.ultradma);
        if ((mask & 0xFF) == 0 || mask == 0xFFFF)
                return(0);
        mask &= 0xFF;
        mode = 0x4F;
        while ((mask & 0x8000) == 0) {
                mask <<= 1;
                --mode;
        }

        /*
         * SATA atapi devices often still report a dma mode, even though
         * it is irrelevant for SATA transport.  It is also possible that
         * we are running through a SATA->PATA converter and seeing the
         * PATA dma mode.
         *
         * In this case the device may require a (dummy) SETXFER to be
         * sent before it will work properly.
         */
        xa = sili_ata_get_xfer(ap, atx);
        xa->complete = sili_ata_dummy_done;
        xa->fis->command = ATA_C_SET_FEATURES;
        xa->fis->features = ATA_SF_SETXFER;
        xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
        xa->fis->sector_count = mode;
        xa->flags = ATA_F_PIO | ATA_F_POLL;
        xa->timeout = 1000;
        xa->datalen = 0;
        if (sili_ata_cmd(xa) != ATA_S_COMPLETE) {
                kprintf("%s: Unable to set dummy xfer mode \n",
                        ATANAME(ap, atx));
        } else if (bootverbose) {
                kprintf("%s: Set dummy xfer mode to %02x\n",
                        ATANAME(ap, atx), mode);
        }
        sili_ata_put_xfer(xa);
        return(0);
}

/*
 * Fix byte ordering so buffers can be accessed as
 * strings.
 */
static void
ata_fix_identify(struct ata_identify *id)
{
        u_int16_t       *swap;
        int             i;

        swap = (u_int16_t *)id->serial;
        for (i = 0; i < sizeof(id->serial) / sizeof(u_int16_t); i++)
                swap[i] = bswap16(swap[i]);

        swap = (u_int16_t *)id->firmware;
        for (i = 0; i < sizeof(id->firmware) / sizeof(u_int16_t); i++)
                swap[i] = bswap16(swap[i]);

        swap = (u_int16_t *)id->model;
        for (i = 0; i < sizeof(id->model) / sizeof(u_int16_t); i++)
                swap[i] = bswap16(swap[i]);
}

/*
 * Dummy done callback for xa.
 */
static void
sili_ata_dummy_done(struct ata_xfer *xa)
{
}

/*
 * Use an engineering request to initiate a target scan for devices
 * behind a port multiplier.
 *
 * An asynchronous bus scan is used to avoid reentrancy issues.
 */
static void
sili_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb)
{
        struct sili_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr;

        if (ccb->ccb_h.func_code == XPT_SCAN_BUS) {
                ap->ap_flags &= ~AP_F_SCAN_RUNNING;
                if (ap->ap_flags & AP_F_SCAN_REQUESTED) {
                        ap->ap_flags &= ~AP_F_SCAN_REQUESTED;
                        sili_cam_rescan(ap);
                }
                ap->ap_flags |= AP_F_SCAN_COMPLETED;
                wakeup(&ap->ap_flags);
        }
        xpt_free_ccb(&ccb->ccb_h);
}

static void
sili_cam_rescan(struct sili_port *ap)
{
        struct cam_path *path;
        union ccb *ccb;
        int status;
        int i;

        if (ap->ap_flags & AP_F_SCAN_RUNNING) {
                ap->ap_flags |= AP_F_SCAN_REQUESTED;
                return;
        }
        ap->ap_flags |= AP_F_SCAN_RUNNING;
        for (i = 0; i < SILI_MAX_PMPORTS; ++i) {
                ap->ap_ata[i].at_features |= ATA_PORT_F_RESCAN;
        }

        status = xpt_create_path(&path, xpt_periph, cam_sim_path(ap->ap_sim),
                                 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
        if (status != CAM_REQ_CMP)
                return;

        ccb = xpt_alloc_ccb();
        xpt_setup_ccb(&ccb->ccb_h, path, 5);    /* 5 = low priority */
        ccb->ccb_h.func_code = XPT_ENG_EXEC;
        ccb->ccb_h.cbfcnp = sili_cam_rescan_callback;
        ccb->ccb_h.sim_priv.entries[0].ptr = ap;
        ccb->crcn.flags = CAM_FLAG_NONE;
        xpt_action_async(ccb);
}

static void
sili_xpt_rescan(struct sili_port *ap)
{
        struct cam_path *path;
        union ccb *ccb;
        int status;

        status = xpt_create_path(&path, xpt_periph, cam_sim_path(ap->ap_sim),
                                 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD);
        if (status != CAM_REQ_CMP)
                return;

        ccb = xpt_alloc_ccb();
        xpt_setup_ccb(&ccb->ccb_h, path, 5);    /* 5 = low priority */
        ccb->ccb_h.func_code = XPT_SCAN_BUS;
        ccb->ccb_h.cbfcnp = sili_cam_rescan_callback;
        ccb->ccb_h.sim_priv.entries[0].ptr = ap;
        ccb->crcn.flags = CAM_FLAG_NONE;
        xpt_action_async(ccb);
}

/*
 * Action function - dispatch command
 */
static
void
sili_xpt_action(struct cam_sim *sim, union ccb *ccb)
{
        struct sili_port *ap;
        struct ata_port  *at, *atx;
        struct ccb_hdr *ccbh;

        /* XXX lock */
        ap = cam_sim_softc(sim);
        at = ap->ap_ata;
        atx = NULL;
        KKASSERT(ap != NULL);
        ccbh = &ccb->ccb_h;

        /*
         * Early failure checks.  These checks do not apply to XPT_PATH_INQ,
         * otherwise the bus rescan will not remove the dead devices when
         * unplugging a PM.
         *
         * For non-wildcards we have one target (0) and one lun (0),
         * unless we have a port multiplier.
         *
         * A wildcard target indicates only the general bus is being
         * probed.
         *
         * Calculate at and atx.  at is always non-NULL.  atx is only
         * NULL for direct-attached devices.  It will be non-NULL for
         * devices behind a port multiplier.
         *
         * XXX What do we do with a LUN wildcard?
         */
        if (ccbh->target_id != CAM_TARGET_WILDCARD &&
            ccbh->func_code != XPT_PATH_INQ) {
                if (ap->ap_type == ATA_PORT_T_NONE) {
                        ccbh->status = CAM_DEV_NOT_THERE;
                        xpt_done(ccb);
                        return;
                }
                if (ccbh->target_id < 0 || ccbh->target_id >= ap->ap_pmcount) {
                        ccbh->status = CAM_DEV_NOT_THERE;
                        xpt_done(ccb);
                        return;
                }
                at += ccbh->target_id;
                if (ap->ap_type == ATA_PORT_T_PM)
                        atx = at;

                if (ccbh->target_lun != CAM_LUN_WILDCARD && ccbh->target_lun) {
                        ccbh->status = CAM_DEV_NOT_THERE;
                        xpt_done(ccb);
                        return;
                }
        }

        /*
         * Switch on the meta XPT command
         */
        switch(ccbh->func_code) {
        case XPT_ENG_EXEC:
                /*
                 * This routine is called after a port multiplier has been
                 * probed.
                 */
                ccbh->status = CAM_REQ_CMP;
                sili_os_lock_port(ap);
                sili_port_state_machine(ap, 0);
                sili_os_unlock_port(ap);
                xpt_done(ccb);
                sili_xpt_rescan(ap);
                break;
        case XPT_PATH_INQ:
                /*
                 * This command always succeeds, otherwise the bus scan
                 * will not detach dead devices.
                 */
                ccb->cpi.version_num = 1;
                ccb->cpi.hba_inquiry = 0;
                ccb->cpi.target_sprt = 0;
                ccb->cpi.hba_misc = PIM_SEQSCAN;
                ccb->cpi.hba_eng_cnt = 0;
                bzero(ccb->cpi.vuhba_flags, sizeof(ccb->cpi.vuhba_flags));
                ccb->cpi.max_target = SILI_MAX_PMPORTS - 1;
                ccb->cpi.max_lun = 0;
                ccb->cpi.async_flags = 0;
                ccb->cpi.hpath_id = 0;
                ccb->cpi.initiator_id = SILI_MAX_PMPORTS - 1;
                ccb->cpi.unit_number = cam_sim_unit(sim);
                ccb->cpi.bus_id = cam_sim_bus(sim);
                ccb->cpi.base_transfer_speed = 150000;
                ccb->cpi.transport = XPORT_SATA;
                ccb->cpi.transport_version = 1;
                ccb->cpi.protocol = PROTO_SCSI;
                ccb->cpi.protocol_version = SCSI_REV_2;
                ccb->cpi.maxio = SILI_MAXPHYS;

                ccbh->status = CAM_REQ_CMP;
                if (ccbh->target_id == CAM_TARGET_WILDCARD) {
                        sili_os_lock_port(ap);
                        sili_port_state_machine(ap, 0);
                        sili_os_unlock_port(ap);
                } else {
                        switch(sili_pread(ap, SILI_PREG_SSTS) &
                               SILI_PREG_SSTS_SPD) {
                        case SILI_PREG_SSTS_SPD_GEN1:
                                ccb->cpi.base_transfer_speed = 150000;
                                break;
                        case SILI_PREG_SSTS_SPD_GEN2:
                                ccb->cpi.base_transfer_speed = 300000;
                                break;
                        default:
                                /* unknown */
                                ccb->cpi.base_transfer_speed = 1000;
                                break;
                        }
#if 0
                        if (ap->ap_type == ATA_PORT_T_NONE)
                                ccbh->status = CAM_DEV_NOT_THERE;
#endif
                }
                xpt_done(ccb);
                break;
        case XPT_RESET_DEV:
                sili_os_lock_port(ap);
                if (ap->ap_type == ATA_PORT_T_NONE) {
                        ccbh->status = CAM_DEV_NOT_THERE;
                } else {
                        sili_port_reset(ap, atx, 0);
                        ccbh->status = CAM_REQ_CMP;
                }
                sili_os_unlock_port(ap);
                xpt_done(ccb);
                break;
        case XPT_RESET_BUS:
                sili_os_lock_port(ap);
                sili_port_reset(ap, NULL, 1);
                sili_os_unlock_port(ap);
                ccbh->status = CAM_REQ_CMP;
                xpt_done(ccb);
                break;
        case XPT_SET_TRAN_SETTINGS:
                ccbh->status = CAM_FUNC_NOTAVAIL;
                xpt_done(ccb);
                break;
        case XPT_GET_TRAN_SETTINGS:
                ccb->cts.protocol = PROTO_SCSI;
                ccb->cts.protocol_version = SCSI_REV_2;
                ccb->cts.transport = XPORT_SATA;
                ccb->cts.transport_version = XPORT_VERSION_UNSPECIFIED;
                ccb->cts.proto_specific.valid = 0;
                ccb->cts.xport_specific.valid = 0;
                ccbh->status = CAM_REQ_CMP;
                xpt_done(ccb);
                break;
        case XPT_CALC_GEOMETRY:
                cam_calc_geometry(&ccb->ccg, 1);
                xpt_done(ccb);
                break;
        case XPT_SCSI_IO:
                /*
                 * Our parallel startup code might have only probed through
                 * to the IDENT, so do the last step if necessary.
                 */
                if (at->at_probe == ATA_PROBE_NEED_IDENT)
                        sili_cam_probe(ap, atx);
                if (at->at_probe != ATA_PROBE_GOOD) {
                        ccbh->status = CAM_DEV_NOT_THERE;
                        xpt_done(ccb);
                        break;
                }
                switch(at->at_type) {
                case ATA_PORT_T_DISK:
                        sili_xpt_scsi_disk_io(ap, atx, ccb);
                        break;
                case ATA_PORT_T_ATAPI:
                        sili_xpt_scsi_atapi_io(ap, atx, ccb);
                        break;
                default:
                        ccbh->status = CAM_REQ_INVALID;
                        xpt_done(ccb);
                        break;
                }
                break;
        default:
                ccbh->status = CAM_REQ_INVALID;
                xpt_done(ccb);
                break;
        }
}

/*
 * Poll function.
 *
 * Generally this function gets called heavily when interrupts might be
 * non-operational, during a halt/reboot or panic.
 */
static
void
sili_xpt_poll(struct cam_sim *sim)
{
        struct sili_port *ap;

        ap = cam_sim_softc(sim);
        crit_enter();
        sili_os_lock_port(ap);
        sili_port_intr(ap, 1);
        sili_os_unlock_port(ap);
        crit_exit();
}

/*
 * Convert the SCSI command in ccb to an ata_xfer command in xa
 * for ATA_PORT_T_DISK operations.  Set the completion function
 * to convert the response back, then dispatch to the OpenBSD SILI
 * layer.
 *
 * SILI DISK commands only support a limited command set, and we
 * fake additional commands to make it play nice with the CAM subsystem.
 */
static
void
sili_xpt_scsi_disk_io(struct sili_port *ap, struct ata_port *atx,
                      union ccb *ccb)
{
        struct ccb_hdr *ccbh;
        struct ccb_scsiio *csio;
        struct ata_xfer *xa;
        struct ata_port *at;
        struct ata_fis_h2d *fis;
        struct ata_pass_12 *atp12;
        struct ata_pass_16 *atp16;
        scsi_cdb_t cdb;
        union scsi_data *rdata;
        int rdata_len;
        u_int64_t capacity;
        u_int64_t lba;
        u_int32_t count;

        ccbh = &ccb->csio.ccb_h;
        csio = &ccb->csio;
        at = atx ? atx : &ap->ap_ata[0];

        /*
         * XXX not passing NULL at for direct attach!
         */
        xa = sili_ata_get_xfer(ap, atx);
        rdata = (void *)csio->data_ptr;
        rdata_len = csio->dxfer_len;

        /*
         * Build the FIS or process the csio to completion.
         */
        cdb = (void *)((ccbh->flags & CAM_CDB_POINTER) ?
                        csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes);

        switch(cdb->generic.opcode) {
        case REQUEST_SENSE:
                /*
                 * Auto-sense everything, so explicit sense requests
                 * return no-sense.
                 */
                ccbh->status = CAM_SCSI_STATUS_ERROR;
                break;
        case INQUIRY:
                /*
                 * Inquiry supported features
                 *
                 * [opcode, byte2, page_code, length, control]
                 */
                if (cdb->inquiry.byte2 & SI_EVPD) {
                        sili_xpt_page_inquiry(ap, at, ccb);
                } else {
                        bzero(rdata, rdata_len);
                        if (rdata_len < SHORT_INQUIRY_LENGTH) {
                                ccbh->status = CAM_CCB_LEN_ERR;
                                break;
                        }
                        if (rdata_len > sizeof(rdata->inquiry_data))
                                rdata_len = sizeof(rdata->inquiry_data);
                        rdata->inquiry_data.device = T_DIRECT;
                        rdata->inquiry_data.version = SCSI_REV_SPC2;
                        rdata->inquiry_data.response_format = 2;
                        rdata->inquiry_data.additional_length = 32;
                        bcopy("SATA    ", rdata->inquiry_data.vendor, 8);
                        bcopy(at->at_identify.model,
                              rdata->inquiry_data.product,
                              sizeof(rdata->inquiry_data.product));
                        bcopy(at->at_identify.firmware,
                              rdata->inquiry_data.revision,
                              sizeof(rdata->inquiry_data.revision));
                        ccbh->status = CAM_REQ_CMP;
                }
                break;
        case READ_CAPACITY_16:
                if (cdb->read_capacity_16.service_action != SRC16_SERVICE_ACTION) {
                        ccbh->status = CAM_REQ_INVALID;
                        break;
                }
                if (rdata_len < sizeof(rdata->read_capacity_data_16)) {
                        ccbh->status = CAM_CCB_LEN_ERR;
                        break;
                }
                /* fall through */
        case READ_CAPACITY:
                if (rdata_len < sizeof(rdata->read_capacity_data)) {
                        ccbh->status = CAM_CCB_LEN_ERR;
                        break;
                }

                capacity = at->at_capacity;

                bzero(rdata, rdata_len);
                if (cdb->generic.opcode == READ_CAPACITY) {
                        rdata_len = sizeof(rdata->read_capacity_data);
                        if (capacity > 0xFFFFFFFFU) {
                                /*
                                 * Set capacity to 0 so maxsector winds up
                                 * being 0xffffffff in CAM in order to trigger
                                 * DA_STATE_PROBE2.
                                 */
                                capacity = 0;
                        }
                        bzero(&rdata->read_capacity_data, rdata_len);
                        scsi_ulto4b((u_int32_t)capacity - 1,
                                    rdata->read_capacity_data.addr);
                        scsi_ulto4b(512, rdata->read_capacity_data.length);
                } else {
                        rdata_len = sizeof(rdata->read_capacity_data_16);
                        bzero(&rdata->read_capacity_data_16, rdata_len);
                        scsi_u64to8b(capacity - 1,
                                     rdata->read_capacity_data_16.addr);
                        scsi_ulto4b(512, rdata->read_capacity_data_16.length);
                }
                ccbh->status = CAM_REQ_CMP;
                break;
        case SYNCHRONIZE_CACHE:
                /*
                 * Synchronize cache.  Specification says this can take
                 * greater then 30 seconds so give it at least 45.
                 */
                fis = xa->fis;
                fis->flags = ATA_H2D_FLAGS_CMD;
                fis->command = ATA_C_FLUSH_CACHE;
                fis->device = 0;
                if (xa->timeout < 45000)
                        xa->timeout = 45000;
                xa->datalen = 0;
                xa->flags = ATA_F_READ;
                xa->complete = sili_ata_complete_disk_synchronize_cache;
                break;
        case TEST_UNIT_READY:
        case START_STOP_UNIT:
        case PREVENT_ALLOW:
                /*
                 * Just silently return success
                 */
                ccbh->status = CAM_REQ_CMP;
                rdata_len = 0;
                break;
        case ATA_PASS_12:
                atp12 = &cdb->ata_pass_12;
                fis = xa->fis;
                /*
                 * Figure out the flags to be used, depending on the
                 * direction of the CAM request.
                 */
                switch (ccbh->flags & CAM_DIR_MASK) {
                case CAM_DIR_IN:
                        xa->flags = ATA_F_READ;
                        break;
                case CAM_DIR_OUT:
                        xa->flags = ATA_F_WRITE;
                        break;
                default:
                        xa->flags = 0;
                }
                xa->flags |= ATA_F_POLL | ATA_F_EXCLUSIVE;
                xa->data = csio->data_ptr;
                xa->datalen = csio->dxfer_len;
                xa->complete = sili_ata_complete_disk_rw;
                xa->timeout = ccbh->timeout;

                /*
                 * Populate the fis from the information we received through CAM
                 * ATA passthrough.
                 */
                fis->flags = ATA_H2D_FLAGS_CMD; /* maybe also atp12->flags ? */
                fis->features = atp12->features;
                fis->sector_count = atp12->sector_count;
                fis->lba_low = atp12->lba_low;
                fis->lba_mid = atp12->lba_mid;
                fis->lba_high = atp12->lba_high;
                fis->device = atp12->device;    /* maybe always 0? */
                fis->command = atp12->command;
                fis->control = atp12->control;

                /*
                 * Mark as in progress so it is sent to the device.
                 */
                ccbh->status = CAM_REQ_INPROG;
                break;
        case ATA_PASS_16:
                atp16 = &cdb->ata_pass_16;
                fis = xa->fis;
                /*
                 * Figure out the flags to be used, depending on the direction of the
                 * CAM request.
                 */
                switch (ccbh->flags & CAM_DIR_MASK) {
                case CAM_DIR_IN:
                        xa->flags = ATA_F_READ;
                        break;
                case CAM_DIR_OUT:
                        xa->flags = ATA_F_WRITE;
                        break;
                default:
                        xa->flags = 0;
                }
                xa->flags |= ATA_F_POLL | ATA_F_EXCLUSIVE;
                xa->data = csio->data_ptr;
                xa->datalen = csio->dxfer_len;
                xa->complete = sili_ata_complete_disk_rw;
                xa->timeout = ccbh->timeout;

                /*
                 * Populate the fis from the information we received through CAM
                 * ATA passthrough.
                 */
                fis->flags = ATA_H2D_FLAGS_CMD; /* maybe also atp16->flags ? */
                fis->features = atp16->features;
                fis->features_exp = atp16->features_ext;
                fis->sector_count = atp16->sector_count;
                fis->sector_count_exp = atp16->sector_count_ext;
                fis->lba_low = atp16->lba_low;
                fis->lba_low_exp = atp16->lba_low_ext;
                fis->lba_mid = atp16->lba_mid;
                fis->lba_mid_exp = atp16->lba_mid_ext;
                fis->lba_high = atp16->lba_high;
                fis->lba_mid_exp = atp16->lba_mid_ext;
                fis->device = atp16->device;    /* maybe always 0? */
                fis->command = atp16->command;

                /*
                 * Mark as in progress so it is sent to the device.
                 */
                ccbh->status = CAM_REQ_INPROG;
                break;
        default:
                switch(cdb->generic.opcode) {
                case READ_6:
                        lba = scsi_3btoul(cdb->rw_6.addr) & 0x1FFFFF;
                        count = cdb->rw_6.length ? cdb->rw_6.length : 0x100;
                        xa->flags = ATA_F_READ;
                        break;
                case READ_10:
                        lba = scsi_4btoul(cdb->rw_10.addr);
                        count = scsi_2btoul(cdb->rw_10.length);
                        xa->flags = ATA_F_READ;
                        break;
                case READ_12:
                        lba = scsi_4btoul(cdb->rw_12.addr);
                        count = scsi_4btoul(cdb->rw_12.length);
                        xa->flags = ATA_F_READ;
                        break;
                case READ_16:
                        lba = scsi_8btou64(cdb->rw_16.addr);
                        count = scsi_4btoul(cdb->rw_16.length);
                        xa->flags = ATA_F_READ;
                        break;
                case WRITE_6:
                        lba = scsi_3btoul(cdb->rw_6.addr) & 0x1FFFFF;
                        count = cdb->rw_6.length ? cdb->rw_6.length : 0x100;
                        xa->flags = ATA_F_WRITE;
                        break;
                case WRITE_10:
                        lba = scsi_4btoul(cdb->rw_10.addr);
                        count = scsi_2btoul(cdb->rw_10.length);
                        xa->flags = ATA_F_WRITE;
                        break;
                case WRITE_12:
                        lba = scsi_4btoul(cdb->rw_12.addr);
                        count = scsi_4btoul(cdb->rw_12.length);
                        xa->flags = ATA_F_WRITE;
                        break;
                case WRITE_16:
                        lba = scsi_8btou64(cdb->rw_16.addr);
                        count = scsi_4btoul(cdb->rw_16.length);
                        xa->flags = ATA_F_WRITE;
                        break;
                default:
                        ccbh->status = CAM_REQ_INVALID;
                        break;
                }
                if (ccbh->status != CAM_REQ_INPROG)
                        break;

                fis = xa->fis;
                fis->flags = ATA_H2D_FLAGS_CMD;
                fis->lba_low = (u_int8_t)lba;
                fis->lba_mid = (u_int8_t)(lba >> 8);
                fis->lba_high = (u_int8_t)(lba >> 16);
                fis->device = ATA_H2D_DEVICE_LBA;

                /*
                 * NCQ only for direct-attached disks, do not currently
                 * try to use NCQ with port multipliers.
                 *
                 * XXX fixme SII chip can do NCQ w/ port multipliers.
                 */
                if (at->at_ncqdepth > 1 &&
                    at->at_type == ATA_PORT_T_DISK &&
                    (ap->ap_sc->sc_flags & SILI_F_NCQ) &&
                    (ccbh->flags & CAM_POLLED) == 0) {
                        /*
                         * Use NCQ - always uses 48 bit addressing
                         */
                        xa->flags |= ATA_F_NCQ;
                        fis->command = (xa->flags & ATA_F_WRITE) ?
                                        ATA_C_WRITE_FPDMA : ATA_C_READ_FPDMA;
                        fis->lba_low_exp = (u_int8_t)(lba >> 24);
                        fis->lba_mid_exp = (u_int8_t)(lba >> 32);
                        fis->lba_high_exp = (u_int8_t)(lba >> 40);
                        fis->sector_count = xa->tag << 3;
                        fis->features = (u_int8_t)count;
                        fis->features_exp = (u_int8_t)(count >> 8);
                } else if (count > 0x100 || lba > 0x0FFFFFFFU) {
                        /*
                         * Use LBA48
                         */
                        fis->command = (xa->flags & ATA_F_WRITE) ?
                                        ATA_C_WRITEDMA_EXT : ATA_C_READDMA_EXT;
                        fis->lba_low_exp = (u_int8_t)(lba >> 24);
                        fis->lba_mid_exp = (u_int8_t)(lba >> 32);
                        fis->lba_high_exp = (u_int8_t)(lba >> 40);
                        fis->sector_count = (u_int8_t)count;
                        fis->sector_count_exp = (u_int8_t)(count >> 8);
                } else {
                        /*
                         * Use LBA
                         *
                         * NOTE: 256 sectors is supported, stored as 0.
                         */
                        fis->command = (xa->flags & ATA_F_WRITE) ?
                                        ATA_C_WRITEDMA : ATA_C_READDMA;
                        fis->device |= (u_int8_t)(lba >> 24) & 0x0F;
                        fis->sector_count = (u_int8_t)count;
                }

                xa->data = csio->data_ptr;
                xa->datalen = csio->dxfer_len;
                xa->complete = sili_ata_complete_disk_rw;
                xa->timeout = ccbh->timeout;    /* milliseconds */
                if (ccbh->flags & CAM_POLLED)
                        xa->flags |= ATA_F_POLL;
                break;
        }

        /*
         * If the request is still in progress the xa and FIS have
         * been set up (except for the PM target), and must be dispatched.
         * Otherwise the request was completed.
         */
        if (ccbh->status == CAM_REQ_INPROG) {
                KKASSERT(xa->complete != NULL);
                xa->atascsi_private = ccb;
                ccb->ccb_h.sim_priv.entries[0].ptr = ap;
                sili_os_lock_port(ap);
                xa->fis->flags |= at->at_target;
                sili_ata_cmd(xa);
                sili_os_unlock_port(ap);
        } else {
                sili_ata_put_xfer(xa);
                xpt_done(ccb);
        }
}

/*
 * Convert the SCSI command in ccb to an ata_xfer command in xa
 * for ATA_PORT_T_ATAPI operations.  Set the completion function
 * to convert the response back, then dispatch to the OpenBSD SILI
 * layer.
 */
static
void
sili_xpt_scsi_atapi_io(struct sili_port *ap, struct ata_port *atx,
                        union ccb *ccb)
{
        struct ccb_hdr *ccbh;
        struct ccb_scsiio *csio;
        struct ata_xfer *xa;
        struct ata_fis_h2d *fis;
        scsi_cdb_t cdbs;
        scsi_cdb_t cdbd;
        int flags;
        struct ata_port *at;

        ccbh = &ccb->csio.ccb_h;
        csio = &ccb->csio;
        at = atx ? atx : &ap->ap_ata[0];

        switch (ccbh->flags & CAM_DIR_MASK) {
        case CAM_DIR_IN:
                flags = ATA_F_PACKET | ATA_F_READ;
                break;
        case CAM_DIR_OUT:
                flags = ATA_F_PACKET | ATA_F_WRITE;
                break;
        case CAM_DIR_NONE:
                flags = ATA_F_PACKET;
                break;
        default:
                ccbh->status = CAM_REQ_INVALID;
                xpt_done(ccb);
                return;
                /* NOT REACHED */
        }

        /*
         * Special handling to get the rfis back into host memory while
         * still allowing the chip to run commands in parallel to
         * ATAPI devices behind a PM.
         */
        flags |= ATA_F_AUTOSENSE;

        /*
         * The command has to fit in the packet command buffer.
         */
        if (csio->cdb_len < 6 || csio->cdb_len > 16) {
                ccbh->status = CAM_CCB_LEN_ERR;
                xpt_done(ccb);
                return;
        }

        /*
         * Initialize the XA and FIS.  It is unclear how much of
         * this has to mimic the equivalent ATA command.
         *
         * XXX not passing NULL at for direct attach!
         */
        xa = sili_ata_get_xfer(ap, atx);
        fis = xa->fis;

        fis->flags = ATA_H2D_FLAGS_CMD | at->at_target;
        fis->command = ATA_C_PACKET;
        fis->device = ATA_H2D_DEVICE_LBA;
        fis->sector_count = xa->tag << 3;
        if (flags & (ATA_F_READ | ATA_F_WRITE)) {
                if (flags & ATA_F_WRITE) {
                        fis->features = ATA_H2D_FEATURES_DMA |
                                        ATA_H2D_FEATURES_DIR_WRITE;
                } else {
                        fis->features = ATA_H2D_FEATURES_DMA |
                                        ATA_H2D_FEATURES_DIR_READ;
                }
        } else {
                fis->lba_mid = 0;
                fis->lba_high = 0;
        }
        fis->control = ATA_FIS_CONTROL_4BIT;

        xa->flags = flags;
        xa->data = csio->data_ptr;
        xa->datalen = csio->dxfer_len;
        xa->timeout = ccbh->timeout;    /* milliseconds */

        if (ccbh->flags & CAM_POLLED)
                xa->flags |= ATA_F_POLL;

        /*
         * Copy the cdb to the packetcmd buffer in the FIS using a
         * convenient pointer in the xa.
         */
        cdbs = (void *)((ccbh->flags & CAM_CDB_POINTER) ?
                        csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes);
        bcopy(cdbs, xa->packetcmd, csio->cdb_len);

#if 0
        kprintf("opcode %d cdb_len %d dxfer_len %d\n",
                cdbs->generic.opcode,
                csio->cdb_len, csio->dxfer_len);
#endif

        /*
         * Some ATAPI commands do not actually follow the SCSI standard.
         */
        cdbd = (void *)xa->packetcmd;

        switch(cdbd->generic.opcode) {
        case REQUEST_SENSE:
                /*
                 * Force SENSE requests to the ATAPI sense length.
                 *
                 * It is unclear if this is needed or not.
                 */
                if (cdbd->sense.length == SSD_FULL_SIZE) {
                        kprintf("%s: Shortening sense request\n",
                                PORTNAME(ap));
                        cdbd->sense.length = offsetof(struct scsi_sense_data,
                                                      extra_bytes[0]);
                }
                break;
        case INQUIRY:
                /*
                 * Some ATAPI devices can't handle long inquiry lengths,
                 * don't ask me why.  Truncate the inquiry length.
                 */
                if (cdbd->inquiry.page_code == 0 &&
                    cdbd->inquiry.length > SHORT_INQUIRY_LENGTH) {
                        cdbd->inquiry.length = SHORT_INQUIRY_LENGTH;
                }
                break;
        case READ_6:
        case WRITE_6:
                /*
                 * Convert *_6 to *_10 commands.  Most ATAPI devices
                 * cannot handle the SCSI READ_6 and WRITE_6 commands.
                 */
                cdbd->rw_10.opcode |= 0x20;
                cdbd->rw_10.byte2 = 0;
                cdbd->rw_10.addr[0] = cdbs->rw_6.addr[0] & 0x1F;
                cdbd->rw_10.addr[1] = cdbs->rw_6.addr[1];
                cdbd->rw_10.addr[2] = cdbs->rw_6.addr[2];
                cdbd->rw_10.addr[3] = 0;
                cdbd->rw_10.reserved = 0;
                cdbd->rw_10.length[0] = 0;
                cdbd->rw_10.length[1] = cdbs->rw_6.length;
                cdbd->rw_10.control = cdbs->rw_6.control;
                break;
        default:
                break;
        }

        /*
         * And dispatch
         */
        xa->complete = sili_atapi_complete_cmd;
        xa->atascsi_private = ccb;
        ccb->ccb_h.sim_priv.entries[0].ptr = ap;
        sili_os_lock_port(ap);
        sili_ata_cmd(xa);
        sili_os_unlock_port(ap);
}

/*
 * Simulate page inquiries for disk attachments.
 */
static
void
sili_xpt_page_inquiry(struct sili_port *ap, struct ata_port *at, union ccb *ccb)
{
        union {
                struct scsi_vpd_supported_page_list     list;
                struct scsi_vpd_unit_serial_number      serno;
                struct scsi_vpd_unit_devid              devid;
                char                                    buf[256];
        } *page;
        scsi_cdb_t cdb;
        int i;
        int j;
        int len;

        page = kmalloc(sizeof(*page), M_DEVBUF, M_WAITOK | M_ZERO);

        cdb = (void *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
                        ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes);

        switch(cdb->inquiry.page_code) {
        case SVPD_SUPPORTED_PAGE_LIST:
                i = 0;
                page->list.device = T_DIRECT;
                page->list.page_code = SVPD_SUPPORTED_PAGE_LIST;
                page->list.list[i++] = SVPD_SUPPORTED_PAGE_LIST;
                page->list.list[i++] = SVPD_UNIT_SERIAL_NUMBER;
                page->list.list[i++] = SVPD_UNIT_DEVID;
                page->list.length = i;
                len = offsetof(struct scsi_vpd_supported_page_list, list[3]);
                break;
        case SVPD_UNIT_SERIAL_NUMBER:
                i = 0;
                j = sizeof(at->at_identify.serial);
                for (i = 0; i < j && at->at_identify.serial[i] == ' '; ++i)
                        ;
                while (j > i && at->at_identify.serial[j-1] == ' ')
                        --j;
                page->serno.device = T_DIRECT;
                page->serno.page_code = SVPD_UNIT_SERIAL_NUMBER;
                page->serno.length = j - i;
                bcopy(at->at_identify.serial + i,
                      page->serno.serial_num, j - i);
                len = offsetof(struct scsi_vpd_unit_serial_number,
                               serial_num[j-i]);
                break;
        case SVPD_UNIT_DEVID:
                /* fall through for now */
        default:
                ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
                len = 0;
                break;
        }
        if (ccb->ccb_h.status == CAM_REQ_INPROG) {
                if (len <= ccb->csio.dxfer_len) {
                        ccb->ccb_h.status = CAM_REQ_CMP;
                        bzero(ccb->csio.data_ptr, ccb->csio.dxfer_len);
                        bcopy(page, ccb->csio.data_ptr, len);
                        ccb->csio.resid = ccb->csio.dxfer_len - len;
                } else {
                        ccb->ccb_h.status = CAM_CCB_LEN_ERR;
                }
        }
        kfree(page, M_DEVBUF);
}

/*
 * Completion function for ATA_PORT_T_DISK cache synchronization.
 */
static
void
sili_ata_complete_disk_synchronize_cache(struct ata_xfer *xa)
{
        union ccb *ccb = xa->atascsi_private;
        struct ccb_hdr *ccbh = &ccb->ccb_h;
        struct sili_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr;

        switch(xa->state) {
        case ATA_S_COMPLETE:
                ccbh->status = CAM_REQ_CMP;
                ccb->csio.scsi_status = SCSI_STATUS_OK;
                break;
        case ATA_S_ERROR:
                kprintf("%s: synchronize_cache: error\n",
                        ATANAME(ap, xa->at));
                ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID;
                ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
                sili_ata_dummy_sense(&ccb->csio.sense_data);
                break;
        case ATA_S_TIMEOUT:
                kprintf("%s: synchronize_cache: timeout\n",
                        ATANAME(ap, xa->at));
                ccbh->status = CAM_CMD_TIMEOUT;
                break;
        default:
                kprintf("%s: synchronize_cache: unknown state %d\n",
                        ATANAME(ap, xa->at), xa->state);
                ccbh->status = CAM_REQ_CMP_ERR;
                break;
        }
        sili_ata_put_xfer(xa);
        /*sili_os_unlock_port(ap);*/
        xpt_done(ccb);
        /*sili_os_lock_port(ap);*/
}

/*
 * Completion function for ATA_PORT_T_DISK I/O
 */
static
void
sili_ata_complete_disk_rw(struct ata_xfer *xa)
{
        union ccb *ccb = xa->atascsi_private;
        struct ccb_hdr *ccbh = &ccb->ccb_h;
        struct sili_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr;

        switch(xa->state) {
        case ATA_S_COMPLETE:
                ccbh->status = CAM_REQ_CMP;
                ccb->csio.scsi_status = SCSI_STATUS_OK;
                break;
        case ATA_S_ERROR:
                kprintf("%s: disk_rw: error\n", ATANAME(ap, xa->at));
                ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID;
                ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
                sili_ata_dummy_sense(&ccb->csio.sense_data);
                break;
        case ATA_S_TIMEOUT:
                kprintf("%s: disk_rw: timeout\n", ATANAME(ap, xa->at));
                ccbh->status = CAM_CMD_TIMEOUT;
                ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
                sili_ata_dummy_sense(&ccb->csio.sense_data);
                break;
        default:
                kprintf("%s: disk_rw: unknown state %d\n",
                        ATANAME(ap, xa->at), xa->state);
                ccbh->status = CAM_REQ_CMP_ERR;
                break;
        }
        ccb->csio.resid = xa->resid;
        sili_ata_put_xfer(xa);
        /*sili_os_unlock_port(ap);*/
        xpt_done(ccb);
        /*sili_os_lock_port(ap);*/
}

/*
 * Completion function for ATA_PORT_T_ATAPI I/O
 *
 * Sense data is returned in the rfis.
 */
static
void
sili_atapi_complete_cmd(struct ata_xfer *xa)
{
        union ccb *ccb = xa->atascsi_private;
        struct ccb_hdr *ccbh = &ccb->ccb_h;
        struct sili_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr;
        scsi_cdb_t cdb;

        cdb = (void *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
                        ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes);

        switch(xa->state) {
        case ATA_S_COMPLETE:
                ccbh->status = CAM_REQ_CMP;
                ccb->csio.scsi_status = SCSI_STATUS_OK;
                break;
        case ATA_S_ERROR:
                ccbh->status = CAM_SCSI_STATUS_ERROR;
                ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
                sili_ata_atapi_sense(xa->rfis, &ccb->csio.sense_data);
                break;
        case ATA_S_TIMEOUT:
                kprintf("%s: cmd %d: timeout\n",
                        PORTNAME(ap), cdb->generic.opcode);
                ccbh->status = CAM_CMD_TIMEOUT;
                ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
                sili_ata_dummy_sense(&ccb->csio.sense_data);
                break;
        default:
                kprintf("%s: cmd %d: unknown state %d\n",
                        PORTNAME(ap), cdb->generic.opcode, xa->state);
                ccbh->status = CAM_REQ_CMP_ERR;
                break;
        }
        ccb->csio.resid = xa->resid;
        sili_ata_put_xfer(xa);
        /*sili_os_unlock_port(ap);*/
        xpt_done(ccb);
        /*sili_os_lock_port(ap);*/
}

/*
 * Construct dummy sense data for errors on DISKs
 */
static
void
sili_ata_dummy_sense(struct scsi_sense_data *sense_data)
{
        sense_data->error_code = SSD_ERRCODE_VALID | SSD_CURRENT_ERROR;
        sense_data->segment = 0;
        sense_data->flags = SSD_KEY_MEDIUM_ERROR;
        sense_data->info[0] = 0;
        sense_data->info[1] = 0;
        sense_data->info[2] = 0;
        sense_data->info[3] = 0;
        sense_data->extra_len = 0;
}

/*
 * Construct atapi sense data for errors on ATAPI
 *
 * The ATAPI sense data is stored in the passed rfis and must be converted
 * to SCSI sense data.
 */
static
void
sili_ata_atapi_sense(struct ata_fis_d2h *rfis,
                     struct scsi_sense_data *sense_data)
{
        sense_data->error_code = SSD_ERRCODE_VALID | SSD_CURRENT_ERROR;
        sense_data->segment = 0;
        sense_data->flags = (rfis->error & 0xF0) >> 4;
        if (rfis->error & 0x04)
                sense_data->flags |= SSD_KEY_ILLEGAL_REQUEST;
        if (rfis->error & 0x02)
                sense_data->flags |= SSD_EOM;
        if (rfis->error & 0x01)
                sense_data->flags |= SSD_ILI;
        sense_data->info[0] = 0;
        sense_data->info[1] = 0;
        sense_data->info[2] = 0;
        sense_data->info[3] = 0;
        sense_data->extra_len = 0;
}

static
void
sili_strip_string(const char **basep, int *lenp)
{
        const char *base = *basep;
        int len = *lenp;

        while (len && (*base == 0 || *base == ' ')) {
                --len;
                ++base;
        }
        while (len && (base[len-1] == 0 || base[len-1] == ' '))
                --len;
        *basep = base;
        *lenp = len;
}