/* $OpenBSD: crypto.h,v 1.57 2022/09/11 17:26:51 tb Exp $ */
/* ====================================================================
 * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
 * All rights reserved.
 *
 * This package is an SSL implementation written
 * by Eric Young (eay@cryptsoft.com).
 * The implementation was written so as to conform with Netscapes SSL.
 *
 * This library is free for commercial and non-commercial use as long as
 * the following conditions are aheared to.  The following conditions
 * apply to all code found in this distribution, be it the RC4, RSA,
 * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
 * included with this distribution is covered by the same copyright terms
 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
 *
 * Copyright remains Eric Young's, and as such any Copyright notices in
 * the code are not to be removed.
 * If this package is used in a product, Eric Young should be given attribution
 * as the author of the parts of the library used.
 * This can be in the form of a textual message at program startup or
 * in documentation (online or textual) provided with the package.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *    "This product includes cryptographic software written by
 *     Eric Young (eay@cryptsoft.com)"
 *    The word 'cryptographic' can be left out if the rouines from the library
 *    being used are not cryptographic related :-).
 * 4. If you include any Windows specific code (or a derivative thereof) from
 *    the apps directory (application code) you must include an acknowledgement:
 *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
 *
 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * The licence and distribution terms for any publically available version or
 * derivative of this code cannot be changed.  i.e. this code cannot simply be
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */
/* ====================================================================
 * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
 * ECDH support in OpenSSL originally developed by
 * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
 */

#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>

#ifndef HEADER_CRYPTO_H
#define HEADER_CRYPTO_H

#include <openssl/opensslconf.h>

#include <openssl/stack.h>
#include <openssl/safestack.h>
#include <openssl/opensslv.h>
#include <openssl/ossl_typ.h>

#ifdef  __cplusplus
extern "C" {
#endif

/* Backward compatibility to SSLeay */
/* This is more to be used to check the correct DLL is being used
 * in the MS world. */
#define SSLEAY_VERSION_NUMBER   OPENSSL_VERSION_NUMBER
#define SSLEAY_VERSION          0
/* #define SSLEAY_OPTIONS       1 no longer supported */
#define SSLEAY_CFLAGS           2
#define SSLEAY_BUILT_ON         3
#define SSLEAY_PLATFORM         4
#define SSLEAY_DIR              5

/* When changing the CRYPTO_LOCK_* list, be sure to maintain the text lock
 * names in cryptlib.c
 */

#define CRYPTO_LOCK_ERR                 1
#define CRYPTO_LOCK_EX_DATA             2
#define CRYPTO_LOCK_X509                3
#define CRYPTO_LOCK_X509_INFO           4
#define CRYPTO_LOCK_X509_PKEY           5
#define CRYPTO_LOCK_X509_CRL            6
#define CRYPTO_LOCK_X509_REQ            7
#define CRYPTO_LOCK_DSA                 8
#define CRYPTO_LOCK_RSA                 9
#define CRYPTO_LOCK_EVP_PKEY            10
#define CRYPTO_LOCK_X509_STORE          11
#define CRYPTO_LOCK_SSL_CTX             12
#define CRYPTO_LOCK_SSL_CERT            13
#define CRYPTO_LOCK_SSL_SESSION         14
#define CRYPTO_LOCK_SSL_SESS_CERT       15
#define CRYPTO_LOCK_SSL                 16
#define CRYPTO_LOCK_SSL_METHOD          17
#define CRYPTO_LOCK_RAND                18
#define CRYPTO_LOCK_RAND2               19
#define CRYPTO_LOCK_MALLOC              20
#define CRYPTO_LOCK_BIO                 21
#define CRYPTO_LOCK_GETHOSTBYNAME       22
#define CRYPTO_LOCK_GETSERVBYNAME       23
#define CRYPTO_LOCK_READDIR             24
#define CRYPTO_LOCK_RSA_BLINDING        25
#define CRYPTO_LOCK_DH                  26
#define CRYPTO_LOCK_MALLOC2             27
#define CRYPTO_LOCK_DSO                 28
#define CRYPTO_LOCK_DYNLOCK             29
#define CRYPTO_LOCK_ENGINE              30
#define CRYPTO_LOCK_UI                  31
#define CRYPTO_LOCK_ECDSA               32
#define CRYPTO_LOCK_EC                  33
#define CRYPTO_LOCK_ECDH                34
#define CRYPTO_LOCK_BN                  35
#define CRYPTO_LOCK_EC_PRE_COMP         36
#define CRYPTO_LOCK_STORE               37
#define CRYPTO_LOCK_COMP                38
#define CRYPTO_LOCK_FIPS                39
#define CRYPTO_LOCK_FIPS2               40
#define CRYPTO_NUM_LOCKS                41

#define CRYPTO_LOCK             1
#define CRYPTO_UNLOCK           2
#define CRYPTO_READ             4
#define CRYPTO_WRITE            8

#ifndef CRYPTO_w_lock
#define CRYPTO_w_lock(type)     \
        CRYPTO_lock(CRYPTO_LOCK|CRYPTO_WRITE,type,NULL,0)
#define CRYPTO_w_unlock(type)   \
        CRYPTO_lock(CRYPTO_UNLOCK|CRYPTO_WRITE,type,NULL,0)
#define CRYPTO_r_lock(type)     \
        CRYPTO_lock(CRYPTO_LOCK|CRYPTO_READ,type,NULL,0)
#define CRYPTO_r_unlock(type)   \
        CRYPTO_lock(CRYPTO_UNLOCK|CRYPTO_READ,type,NULL,0)
#define CRYPTO_add(addr,amount,type)    \
        CRYPTO_add_lock(addr,amount,type,NULL,0)
#endif

/* Some applications as well as some parts of OpenSSL need to allocate
   and deallocate locks in a dynamic fashion.  The following typedef
   makes this possible in a type-safe manner.  */
/* struct CRYPTO_dynlock_value has to be defined by the application. */
typedef struct {
        int references;
        struct CRYPTO_dynlock_value *data;
} CRYPTO_dynlock;


/* The following can be used to detect memory leaks in the SSLeay library.
 * It used, it turns on malloc checking */

#define CRYPTO_MEM_CHECK_OFF    0x0     /* an enume */
#define CRYPTO_MEM_CHECK_ON     0x1     /* a bit */
#define CRYPTO_MEM_CHECK_ENABLE 0x2     /* a bit */
#define CRYPTO_MEM_CHECK_DISABLE 0x3    /* an enume */

/* The following are bit values to turn on or off options connected to the
 * malloc checking functionality */

/* Adds time to the memory checking information */
#define V_CRYPTO_MDEBUG_TIME    0x1 /* a bit */
/* Adds thread number to the memory checking information */
#define V_CRYPTO_MDEBUG_THREAD  0x2 /* a bit */

#define V_CRYPTO_MDEBUG_ALL (V_CRYPTO_MDEBUG_TIME | V_CRYPTO_MDEBUG_THREAD)


/* predec of the BIO type */
typedef struct bio_st BIO_dummy;

struct crypto_ex_data_st {
        STACK_OF(void) *sk;
};
DECLARE_STACK_OF(void)

/* This stuff is basically class callback functions
 * The current classes are SSL_CTX, SSL, SSL_SESSION, and a few more */

typedef struct crypto_ex_data_func_st {
        long argl;      /* Arbitary long */
        void *argp;     /* Arbitary void * */
        CRYPTO_EX_new *new_func;
        CRYPTO_EX_free *free_func;
        CRYPTO_EX_dup *dup_func;
} CRYPTO_EX_DATA_FUNCS;

DECLARE_STACK_OF(CRYPTO_EX_DATA_FUNCS)

/* Per class, we have a STACK of CRYPTO_EX_DATA_FUNCS for each CRYPTO_EX_DATA
 * entry.
 */

#define CRYPTO_EX_INDEX_BIO             0
#define CRYPTO_EX_INDEX_SSL             1
#define CRYPTO_EX_INDEX_SSL_CTX         2
#define CRYPTO_EX_INDEX_SSL_SESSION     3
#define CRYPTO_EX_INDEX_X509_STORE      4
#define CRYPTO_EX_INDEX_X509_STORE_CTX  5
#define CRYPTO_EX_INDEX_RSA             6
#define CRYPTO_EX_INDEX_DSA             7
#define CRYPTO_EX_INDEX_DH              8
#define CRYPTO_EX_INDEX_ENGINE          9
#define CRYPTO_EX_INDEX_X509            10
#define CRYPTO_EX_INDEX_UI              11
#define CRYPTO_EX_INDEX_ECDSA           12
#define CRYPTO_EX_INDEX_ECDH            13
#define CRYPTO_EX_INDEX_COMP            14
#define CRYPTO_EX_INDEX_STORE           15
#define CRYPTO_EX_INDEX_EC_KEY          16

/* Dynamically assigned indexes start from this value (don't use directly, use
 * via CRYPTO_ex_data_new_class). */
#define CRYPTO_EX_INDEX_USER            100

#ifndef LIBRESSL_INTERNAL
#define CRYPTO_malloc_init()            (0)
#define CRYPTO_malloc_debug_init()      (0)

#if defined CRYPTO_MDEBUG_ALL || defined CRYPTO_MDEBUG_TIME || defined CRYPTO_MDEBUG_THREAD
# ifndef CRYPTO_MDEBUG /* avoid duplicate #define */
#  define CRYPTO_MDEBUG
# endif
#endif

int CRYPTO_mem_ctrl(int mode);
int CRYPTO_is_mem_check_on(void);

/* for applications */
#define MemCheck_start() CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON)
#define MemCheck_stop() CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF)

#define OPENSSL_malloc(num)     CRYPTO_malloc((int)num,NULL,0)
#define OPENSSL_strdup(str)     CRYPTO_strdup((str),NULL,0)
#define OPENSSL_realloc(addr,num) \
        CRYPTO_realloc((char *)addr,(int)num,NULL,0)
#define OPENSSL_realloc_clean(addr,old_num,num) \
        CRYPTO_realloc_clean(addr,old_num,num,NULL,0)
#define OPENSSL_remalloc(addr,num) \
        CRYPTO_remalloc((char **)addr,(int)num,NULL,0)
#define OPENSSL_freeFunc        CRYPTO_free
#define OPENSSL_free(addr)      CRYPTO_free(addr)

#define OPENSSL_malloc_locked(num) \
        CRYPTO_malloc_locked((int)num,NULL,0)
#define OPENSSL_free_locked(addr) CRYPTO_free_locked(addr)
#endif

const char *OpenSSL_version(int type);
#define OPENSSL_VERSION         0
#define OPENSSL_CFLAGS          1
#define OPENSSL_BUILT_ON        2
#define OPENSSL_PLATFORM        3
#define OPENSSL_DIR             4
#define OPENSSL_ENGINES_DIR     5
unsigned long OpenSSL_version_num(void);

const char *SSLeay_version(int type);
unsigned long SSLeay(void);

/* An opaque type representing an implementation of "ex_data" support */
typedef struct st_CRYPTO_EX_DATA_IMPL   CRYPTO_EX_DATA_IMPL;
/* Return an opaque pointer to the current "ex_data" implementation */
const CRYPTO_EX_DATA_IMPL *CRYPTO_get_ex_data_implementation(void);
/* Sets the "ex_data" implementation to be used (if it's not too late) */
int CRYPTO_set_ex_data_implementation(const CRYPTO_EX_DATA_IMPL *i);
/* Get a new "ex_data" class, and return the corresponding "class_index" */
int CRYPTO_ex_data_new_class(void);
/* Within a given class, get/register a new index */
int CRYPTO_get_ex_new_index(int class_index, long argl, void *argp,
    CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func,
    CRYPTO_EX_free *free_func);
/* Initialise/duplicate/free CRYPTO_EX_DATA variables corresponding to a given
 * class (invokes whatever per-class callbacks are applicable) */
int CRYPTO_new_ex_data(int class_index, void *obj, CRYPTO_EX_DATA *ad);
int CRYPTO_dup_ex_data(int class_index, CRYPTO_EX_DATA *to,
    CRYPTO_EX_DATA *from);
void CRYPTO_free_ex_data(int class_index, void *obj, CRYPTO_EX_DATA *ad);
/* Get/set data in a CRYPTO_EX_DATA variable corresponding to a particular index
 * (relative to the class type involved) */
int CRYPTO_set_ex_data(CRYPTO_EX_DATA *ad, int idx, void *val);
void *CRYPTO_get_ex_data(const CRYPTO_EX_DATA *ad, int idx);
/* This function cleans up all "ex_data" state. It mustn't be called under
 * potential race-conditions. */
void CRYPTO_cleanup_all_ex_data(void);

void CRYPTO_lock(int mode, int type, const char *file, int line);
int CRYPTO_add_lock(int *pointer, int amount, int type, const char *file,
    int line);

/* Don't use this structure directly. */
typedef struct crypto_threadid_st {
        void *ptr;
        unsigned long val;
} CRYPTO_THREADID;
void CRYPTO_THREADID_current(CRYPTO_THREADID *id);
int CRYPTO_THREADID_cmp(const CRYPTO_THREADID *a, const CRYPTO_THREADID *b);
void CRYPTO_THREADID_cpy(CRYPTO_THREADID *dest, const CRYPTO_THREADID *src);
unsigned long CRYPTO_THREADID_hash(const CRYPTO_THREADID *id);

#ifndef LIBRESSL_INTERNAL
/* These functions are deprecated no-op stubs */
void CRYPTO_set_id_callback(unsigned long (*func)(void));
unsigned long (*CRYPTO_get_id_callback(void))(void);
unsigned long CRYPTO_thread_id(void);

int CRYPTO_get_new_lockid(char *name);
const char *CRYPTO_get_lock_name(int type);

int CRYPTO_num_locks(void);
void CRYPTO_set_locking_callback(void (*func)(int mode, int type,
    const char *file, int line));
void (*CRYPTO_get_locking_callback(void))(int mode, int type,
    const char *file, int line);
void CRYPTO_set_add_lock_callback(int (*func)(int *num, int mount, int type,
    const char *file, int line));
int (*CRYPTO_get_add_lock_callback(void))(int *num, int mount, int type,
    const char *file, int line);

void CRYPTO_THREADID_set_numeric(CRYPTO_THREADID *id, unsigned long val);
void CRYPTO_THREADID_set_pointer(CRYPTO_THREADID *id, void *ptr);
int CRYPTO_THREADID_set_callback(void (*threadid_func)(CRYPTO_THREADID *));
void (*CRYPTO_THREADID_get_callback(void))(CRYPTO_THREADID *);

int CRYPTO_get_new_dynlockid(void);
void CRYPTO_destroy_dynlockid(int i);
struct CRYPTO_dynlock_value *CRYPTO_get_dynlock_value(int i);
void CRYPTO_set_dynlock_create_callback(struct CRYPTO_dynlock_value *(*dyn_create_function)(const char *file, int line));
void CRYPTO_set_dynlock_lock_callback(void (*dyn_lock_function)(int mode, struct CRYPTO_dynlock_value *l, const char *file, int line));
void CRYPTO_set_dynlock_destroy_callback(void (*dyn_destroy_function)(struct CRYPTO_dynlock_value *l, const char *file, int line));
struct CRYPTO_dynlock_value *(*CRYPTO_get_dynlock_create_callback(void))(const char *file, int line);
void (*CRYPTO_get_dynlock_lock_callback(void))(int mode, struct CRYPTO_dynlock_value *l, const char *file, int line);
void (*CRYPTO_get_dynlock_destroy_callback(void))(struct CRYPTO_dynlock_value *l, const char *file, int line);
#endif

/* CRYPTO_set_mem_functions includes CRYPTO_set_locked_mem_functions --
 * call the latter last if you need different functions */
int CRYPTO_set_mem_functions(void *(*m)(size_t), void *(*r)(void *, size_t), void (*f)(void *));
int CRYPTO_set_locked_mem_functions(void *(*m)(size_t), void (*free_func)(void *));
int CRYPTO_set_mem_ex_functions(void *(*m)(size_t, const char *, int),
    void *(*r)(void *, size_t, const char *, int), void (*f)(void *));
int CRYPTO_set_locked_mem_ex_functions(void *(*m)(size_t, const char *, int),
    void (*free_func)(void *));
int CRYPTO_set_mem_debug_functions(
    void (*m)(void *, int, const char *, int, int),
    void (*r)(void *, void *, int, const char *, int, int),
    void (*f)(void *, int), void (*so)(long), long (*go)(void));
void CRYPTO_get_mem_functions(void *(**m)(size_t), void *(**r)(void *, size_t),
    void (**f)(void *));
void CRYPTO_get_locked_mem_functions(void *(**m)(size_t), void (**f)(void *));
void CRYPTO_get_mem_ex_functions(void *(**m)(size_t, const char *, int),
    void *(**r)(void *, size_t, const char *, int), void (**f)(void *));
void CRYPTO_get_locked_mem_ex_functions(void *(**m)(size_t, const char *, int),
    void (**f)(void *));
void CRYPTO_get_mem_debug_functions(
    void (**m)(void *, int, const char *, int, int),
    void (**r)(void *, void *, int, const char *, int, int),
    void (**f)(void *, int), void (**so)(long), long (**go)(void));

#ifndef LIBRESSL_INTERNAL
void *CRYPTO_malloc_locked(int num, const char *file, int line);
void CRYPTO_free_locked(void *ptr);
void *CRYPTO_malloc(int num, const char *file, int line);
char *CRYPTO_strdup(const char *str, const char *file, int line);
void CRYPTO_free(void *ptr);
void *CRYPTO_realloc(void *addr, int num, const char *file, int line);
#endif

void *CRYPTO_realloc_clean(void *addr, int old_num, int num,
    const char *file, int line);
void *CRYPTO_remalloc(void *addr, int num, const char *file, int line);

#ifndef LIBRESSL_INTERNAL
void OPENSSL_cleanse(void *ptr, size_t len);
#endif

void CRYPTO_set_mem_debug_options(long bits);
long CRYPTO_get_mem_debug_options(void);

#define CRYPTO_push_info(info) \
        CRYPTO_push_info_(info, NULL, 0);
int CRYPTO_push_info_(const char *info, const char *file, int line);
int CRYPTO_pop_info(void);
int CRYPTO_remove_all_info(void);


/* Default debugging functions (enabled by CRYPTO_malloc_debug_init() macro;
 * used as default in CRYPTO_MDEBUG compilations): */
/* The last argument has the following significance:
 *
 * 0:   called before the actual memory allocation has taken place
 * 1:   called after the actual memory allocation has taken place
 */
void CRYPTO_dbg_malloc(void *addr, int num, const char *file, int line, int before_p)
        __attribute__ ((deprecated));
void CRYPTO_dbg_realloc(void *addr1, void *addr2, int num, const char *file, int line, int before_p)
        __attribute__ ((deprecated));
void CRYPTO_dbg_free(void *addr, int before_p)
        __attribute__ ((deprecated));
/* Tell the debugging code about options.  By default, the following values
 * apply:
 *
 * 0:                           Clear all options.
 * V_CRYPTO_MDEBUG_TIME (1):    Set the "Show Time" option.
 * V_CRYPTO_MDEBUG_THREAD (2):  Set the "Show Thread Number" option.
 * V_CRYPTO_MDEBUG_ALL (3):     1 + 2
 */
void CRYPTO_dbg_set_options(long bits)
        __attribute__ ((deprecated));
long CRYPTO_dbg_get_options(void)
        __attribute__ ((deprecated));


int CRYPTO_mem_leaks_fp(FILE *);
int CRYPTO_mem_leaks(struct bio_st *bio);
/* unsigned long order, char *file, int line, int num_bytes, char *addr */
typedef int *CRYPTO_MEM_LEAK_CB(unsigned long, const char *, int, int, void *);
int CRYPTO_mem_leaks_cb(CRYPTO_MEM_LEAK_CB *cb);

/* die if we have to */
void OpenSSLDie(const char *file, int line, const char *assertion);
#define OPENSSL_assert(e)       (void)((e) ? 0 : (OpenSSLDie(__FILE__, __LINE__, #e),1))

uint64_t OPENSSL_cpu_caps(void);

int OPENSSL_isservice(void);

#ifndef LIBRESSL_INTERNAL
int FIPS_mode(void);
int FIPS_mode_set(int r);

void OPENSSL_init(void);

/* CRYPTO_memcmp returns zero iff the |len| bytes at |a| and |b| are equal. It
 * takes an amount of time dependent on |len|, but independent of the contents
 * of |a| and |b|. Unlike memcmp, it cannot be used to put elements into a
 * defined order as the return value when a != b is undefined, other than to be
 * non-zero. */
int CRYPTO_memcmp(const void *a, const void *b, size_t len);
#endif

void ERR_load_CRYPTO_strings(void);

/* Error codes for the CRYPTO functions. */

/* Function codes. */
#define CRYPTO_F_CRYPTO_GET_EX_NEW_INDEX                 100
#define CRYPTO_F_CRYPTO_GET_NEW_DYNLOCKID                103
#define CRYPTO_F_CRYPTO_GET_NEW_LOCKID                   101
#define CRYPTO_F_CRYPTO_SET_EX_DATA                      102
#define CRYPTO_F_DEF_ADD_INDEX                           104
#define CRYPTO_F_DEF_GET_CLASS                           105
#define CRYPTO_F_FIPS_MODE_SET                           109
#define CRYPTO_F_INT_DUP_EX_DATA                         106
#define CRYPTO_F_INT_FREE_EX_DATA                        107
#define CRYPTO_F_INT_NEW_EX_DATA                         108

/* Reason codes. */
#define CRYPTO_R_FIPS_MODE_NOT_SUPPORTED                 101
#define CRYPTO_R_NO_DYNLOCK_CREATE_CALLBACK              100

/*
 * OpenSSL compatible OPENSSL_INIT options.
 */

#define OPENSSL_INIT_NO_LOAD_CONFIG             0x00000001L
#define OPENSSL_INIT_LOAD_CONFIG                0x00000002L

/* LibreSSL specific */
#define _OPENSSL_INIT_FLAG_NOOP                 0x80000000L

/*
 * These are provided for compatibiliy, but have no effect
 * on how LibreSSL is initialized.
 */
#define OPENSSL_INIT_NO_LOAD_CRYPTO_STRINGS     _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_LOAD_CRYPTO_STRINGS        _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ADD_ALL_CIPHERS            _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ADD_ALL_DIGESTS            _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_NO_ADD_ALL_CIPHERS         _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_NO_ADD_ALL_DIGESTS         _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ASYNC                      _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ENGINE_RDRAND              _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ENGINE_DYNAMIC             _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ENGINE_OPENSSL             _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ENGINE_CRYPTODEV           _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ENGINE_CAPI                _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ENGINE_PADLOCK             _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ENGINE_AFALG               _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_reserved_internal          _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ATFORK                     _OPENSSL_INIT_FLAG_NOOP
#define OPENSSL_INIT_ENGINE_ALL_BUILTIN         _OPENSSL_INIT_FLAG_NOOP

int OPENSSL_init_crypto(uint64_t opts, const void *settings);
void OPENSSL_cleanup(void);

#ifdef  __cplusplus
}
#endif
#endif