/* $OpenBSD: rgephyreg.h,v 1.10 2023/04/05 10:45:07 kettenis Exp $ */ /* * Copyright (c) 2003 * Bill Paul <wpaul@windriver.com>. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: rgephyreg.h,v 1.1 2003/09/11 03:53:46 wpaul Exp $ */ #ifndef _DEV_MII_RGEPHYREG_H_ #define _DEV_MII_RGEPHYREG_H_ #define RGEPHY_8211B 2 #define RGEPHY_8211C 3 #define RGEPHY_8211F 6 /* * Realtek 8169S/8110S gigE PHY registers */ /* RTL8211B(L)/RTL8211C(L) */ #define RGEPHY_CR 0x10 /* PHY Specific Control */ #define RGEPHY_CR_ASSERT_CRS 0x0800 #define RGEPHY_CR_FORCE_LINK 0x0400 #define RGEPHY_CR_MDI_MASK 0x0060 #define RGEPHY_CR_MDIX_AUTO 0x0040 #define RGEPHY_CR_MDIX_MANUAL 0x0020 #define RGEPHY_CR_MDI_MANUAL 0x0000 #define RGEPHY_CR_CLK125_DIS 0x0010 #define RGEPHY_CR_ALDPS 0x0004 /* RTL8251 only */ #define RGEPHY_CR_JABBER_DIS 0x0001 /* RTL8211B(L)/RTL8211C(L) */ #define RGEPHY_SR 0x11 /* PHY Specific Status */ #define RGEPHY_SR_SPEED_1000MBPS 0x8000 #define RGEPHY_SR_SPEED_100MBPS 0x4000 #define RGEPHY_SR_SPEED_10MBPS 0x0000 #define RGEPHY_SR_SPEED_MASK 0xc000 #define RGEPHY_SR_FDX 0x2000 /* full duplex */ #define RGEPHY_SR_PAGE_RECEIVED 0x1000 /* new page received */ #define RGEPHY_SR_SPD_DPLX_RESOLVED 0x0800 /* speed/duplex resolved */ #define RGEPHY_SR_LINK 0x0400 /* link up */ #define RGEPHY_SR_MDI_XOVER 0x0040 /* MDI crossover */ #define RGEPHY_SR_ALDPS 0x0008 /* RTL8211C(L) only */ #define RGEPHY_SR_JABBER 0x0001 /* Jabber */ #define RGEPHY_SR_SPEED(X) ((X) & RGEPHY_SR_SPEED_MASK) /* RTL8211F */ #define RGEPHY_F_SR 0x1A /* PHY Specific Status */ #define RGEPHY_F_SR_SPEED_1000MBPS 0x0020 #define RGEPHY_F_SR_SPEED_100MBPS 0x0010 #define RGEPHY_F_SR_SPEED_10MBPS 0x0000 #define RGEPHY_F_SR_SPEED_MASK 0x0030 #define RGEPHY_F_SR_FDX 0x0008 #define RGEPHY_F_SR_LINK 0x0004 #define RGEPHY_F_SR_SPEED(X) ((X) & RGEPHY_F_SR_SPEED_MASK) #define RGEPHY_LC 0x18 /* PHY LED Control Register */ #define RGEPHY_LC_P2 0x1A /* PHY LED Control Register, Page 2 */ #define RGEPHY_LC_DISABLE 0x8000 /* disable leds */ /* Led pusle strething */ #define RGEPHY_LC_PULSE_1_3S 0x7000 #define RGEPHY_LC_PULSE_670MS 0x6000 #define RGEPHY_LC_PULSE_340MS 0x5000 #define RGEPHY_LC_PULSE_170MS 0x4000 #define RGEPHY_LC_PULSE_84MS 0x3000 #define RGEPHY_LC_PULSE_42MS 0x2000 #define RGEPHY_LC_PULSE_21MS 0x1000 #define RGEPHY_LC_PULSE_0MS 0x0000 #define RGEPHY_LC_LINK 0x0008 /* Link and speed indicated by combination of leds */ #define RGEPHY_LC_DUPLEX 0x0004 #define RGEPHY_LC_RX 0x0002 #define RGEPHY_LC_TX 0x0001 #define RGEPHY_PS 0x1F /* Page Select Register */ #define RGEPHY_PS_PAGE_0 0x0000 #define RGEPHY_PS_PAGE_1 0x0001 #define RGEPHY_PS_PAGE_2 0x0002 #define RGEPHY_PS_PAGE_3 0x0003 #define RGEPHY_PS_PAGE_4 0x0004 /* RTL8211F */ #define RGEPHY_PS_PAGE_MII 0x0d08 #define RGEPHY_MIICR1 0x11 #define RGEPHY_MIICR1_TXDLY_EN 0x0100 #define RGEPHY_MIICR2 0x15 #define RGEPHY_MIICR2_RXDLY_EN 0x0008 #endif /* _DEV_RGEPHY_MIIREG_H_ */
