root/sys/arch/mvme68k/mvme68k/autoconf.c
/*      $NetBSD: autoconf.c,v 1.49 2026/01/10 21:35:12 thorpej Exp $    */

/*
 * Copyright (c) 1988 University of Utah.
 * Copyright (c) 1982, 1986, 1990, 1993
 *      The Regents of the University of California. All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * the Systems Programming Group of the University of Utah Computer
 * Science Department.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * from: Utah $Hdr: autoconf.c 1.36 92/12/20$
 * 
 *      @(#)autoconf.c  8.2 (Berkeley) 1/12/94
 */

/*
 * Setup the system to run on the current machine.
 *
 * Configure() is called at boot time.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: autoconf.c,v 1.49 2026/01/10 21:35:12 thorpej Exp $");

#include "opt_mvmeconf.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/conf.h>
#include <sys/reboot.h>
#include <sys/device.h>

#include <machine/vmparam.h>
#include <machine/disklabel.h>
#include <machine/cpu.h>
#include <machine/autoconf.h>
#include <machine/pte.h>

#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>

#include <mvme68k/mvme68k/isr.h>

#ifdef MVME147
#include <mvme68k/dev/pccreg.h>
#endif
#if defined(MVME162) || defined(MVME167) || defined(MVME172) || defined(MVME177)
#include <dev/mvme/pcctworeg.h>
#endif


/*
 * Determine mass storage and memory configuration for a machine.
 */
void
cpu_configure(void)
{

        booted_device = NULL;   /* set by device drivers (if found) */

        /* Initialise interrupt handlers */
        isrinit();

        if (config_rootfound("mainbus", NULL) == NULL)
                panic("autoconfig failed, no root");
}

void
cpu_rootconf(void)
{

        printf("boot device: %s",
                (booted_device) ? device_xname(booted_device) : "<unknown>");

        if (bootpart)
                printf(" (partition %d)\n", bootpart);
        else
                printf("\n");

        booted_partition = bootpart;
        rootconf();
}

void
device_register(device_t dev, void *aux)
{
        static device_t controller;
        device_t parent = device_parent(dev);

        if (booted_device)
                return;

        if (controller == NULL && parent) {
                switch (machineid) {
#ifdef MVME147
                case MVME_147:
                        /*
                         * We currently only support booting from the 147's
                         * onboard scsi and ethernet. So ensure this
                         * device's parent is the PCC driver.
                         */
                        if (!device_is_a(parent, "pcc"))
                                return;

                        if (bootaddr == PCC_PADDR(PCC_WDSC_OFF) &&
                            device_is_a(dev, "wdsc")) {
                                controller = dev;
                                return;
                        }

                        if (bootaddr == PCC_PADDR(PCC_LE_OFF) &&
                            device_is_a(dev, "le")) {
                                booted_device = dev;
                                return;
                        }

                        break;
#endif /* MVME_147 */

#if defined(MVME162) || defined(MVME167) || defined(MVME172) || defined(MVME177)
                case MVME_162:
                case MVME_167:
                case MVME_172:
                case MVME_177:
                        /*
                         * We currently only support booting from the 16x and
                         * 17x onboard scsi and ethernet. So ensure this
                         * device's parent is the PCCTWO driver.
                         */
                        if (!device_is_a(parent, "pcctwo"))
                                return;

                        if (bootaddr == PCCTWO_PADDR(PCCTWO_NCRSC_OFF) &&
                            device_is_a(dev, "osiop")) {
                                controller = dev;
                                return;
                        }

                        if (bootaddr == PCCTWO_PADDR(PCCTWO_IE_OFF) &&
                            device_is_a(dev, "ie")) {
                                booted_device = dev;
                                return;
                        }

                        break;
#endif /* MVME_162 || MVME_167 || MVME_172 || MVME_177 */

                default:
                        break;
                }

                return;
        }

        /*
         * Find out which device on the scsibus we booted from
         */
        if (device_is_a(dev, "sd") ||
            device_is_a(dev, "cd") ||
            device_is_a(dev, "st")) {
                struct scsipibus_attach_args *sa = aux;
                struct scsipi_periph *periph = sa->sa_periph;

                if (device_parent(parent) != controller)
                        return;

                /*
                 * bootdevlun is formatted like so:
                 *
                 *      tttt.llll
                 *
                 * So, a disk at SCSI ID 5 would have 0x50 as the
                 * bootdevlun value.
                 *
                 * XXX True for all Bug revisions???
                 */
                int targ = (bootdevlun >> 4) & 0xf;
                /* int lun  =  bootdevlun       & 0xf; */

                if (periph->periph_target != targ)
                        return;

                /* XXX Check LUN? */

                booted_device = dev;
        }
}