/*      $NetBSD: screen.c,v 1.7 2003/10/13 14:34:25 agc Exp $   */

/*
 * Copyright (c) 1988 Mark Nudelman
 * Copyright (c) 1988, 1993
 *      The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
#ifndef lint
#if 0
static char sccsid[] = "@(#)screen.c    8.2 (Berkeley) 4/20/94";
#else
__RCSID("$NetBSD: screen.c,v 1.7 2003/10/13 14:34:25 agc Exp $");
#endif
#endif /* not lint */

/*
 * Routines which deal with the characteristics of the terminal.
 * Uses termcap to be as terminal-independent as possible.
 *
 * {{ Someday this should be rewritten to use curses. }}
 */

#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>

#include "less.h"
#include "extern.h"

#define TERMIOS 1

#if TERMIO
#include <termio.h>
#else
#if TERMIOS
#include <termios.h>
#define TAB3 0
#include <sys/ioctl.h>
#else
#include <sgtty.h>
#endif
#endif
#ifdef __NetBSD__
#include <termcap.h>
#endif

#ifdef TIOCGWINSZ
#include <sys/ioctl.h>
#else
/*
 * For the Unix PC (ATT 7300 & 3B1):
 * Since WIOCGETD is defined in sys/window.h, we can't use that to decide
 * whether to include sys/window.h.  Use SIGPHONE from sys/signal.h instead.
 */
#include <sys/signal.h>
#ifdef SIGPHONE
#include <sys/window.h>
#endif
#endif

/*
 * Strings passed to tputs() to do various terminal functions.
 */
static char
        *sc_pad,                /* Pad string */
        *sc_home,               /* Cursor home */
        *sc_addline,            /* Add line, scroll down following lines */
        *sc_lower_left,         /* Cursor to last line, first column */
        *sc_move,               /* General cursor positioning */
        *sc_clear,              /* Clear screen */
        *sc_eol_clear,          /* Clear to end of line */
        *sc_s_in,               /* Enter standout (highlighted) mode */
        *sc_s_out,              /* Exit standout mode */
        *sc_u_in,               /* Enter underline mode */
        *sc_u_out,              /* Exit underline mode */
        *sc_b_in,               /* Enter bold mode */
        *sc_b_out,              /* Exit bold mode */
        *sc_backspace,          /* Backspace cursor */
        *sc_init,               /* Startup terminal initialization */
        *sc_deinit;             /* Exit terminal de-intialization */

int auto_wrap;                  /* Terminal does \r\n when write past margin */
int ignaw;                      /* Terminal ignores \n immediately after wrap */
                                /* The user's erase and line-kill chars */
int retain_below;               /* Terminal retains text below the screen */
int erase_char, kill_char, werase_char;
int sc_width, sc_height = -1;   /* Height & width of screen */
int sc_window = -1;             /* window size for forward and backward */
int bo_width, be_width;         /* Printing width of boldface sequences */
int ul_width, ue_width;         /* Printing width of underline sequences */
int so_width, se_width;         /* Printing width of standout sequences */

/*
 * These two variables are sometimes defined in,
 * and needed by, the termcap library.
 * It may be necessary on some systems to declare them extern here.
 */
/*extern*/ short ospeed;        /* Terminal output baud rate */
/*extern*/ char PC;             /* Pad character */

/*
 * Change terminal to "raw mode", or restore to "normal" mode.
 * "Raw mode" means 
 *      1. An outstanding read will complete on receipt of a single keystroke.
 *      2. Input is not echoed.  
 *      3. On output, \n is mapped to \r\n.
 *      4. \t is NOT expanded into spaces.
 *      5. Signal-causing characters such as ctrl-C (interrupt),
 *         etc. are NOT disabled.
 * It doesn't matter whether an input \n is mapped to \r, or vice versa.
 */
void
raw_mode(on)
        int on;
{
#if TERMIO || TERMIOS

#if TERMIO
        struct termio s;
        static struct termio save_term;
#else
        struct termios s;
        static struct termios save_term;
#endif

        if (on)
        {
                /*
                 * Get terminal modes.
                 */
#if TERMIO
                (void)ioctl(2, TCGETA, &s);
#else
                tcgetattr(2, &s);
#endif

                /*
                 * Save modes and set certain variables dependent on modes.
                 */
                save_term = s;
#if TERMIO
                ospeed = s.c_cflag & CBAUD;
#else
                ospeed = cfgetospeed(&s);
#endif
                erase_char = s.c_cc[VERASE];
                kill_char = s.c_cc[VKILL];
                werase_char = s.c_cc[VWERASE];

                /*
                 * Set the modes to the way we want them.
                 */
                s.c_lflag &= ~(ICANON|ECHO|ECHOE|ECHOK|ECHONL);
                s.c_oflag |=  (OPOST|ONLCR|TAB3);
#if TERMIO
                s.c_oflag &= ~(OCRNL|ONOCR|ONLRET);
#endif
                s.c_cc[VMIN] = 1;
                s.c_cc[VTIME] = 0;
        } else
        {
                /*
                 * Restore saved modes.
                 */
                s = save_term;
        }
#if TERMIO
        (void)ioctl(2, TCSETAW, &s);
#else
        tcsetattr(2, TCSADRAIN, &s);
#endif
#else
        struct sgttyb s;
        struct ltchars l;
        static struct sgttyb save_term;

        if (on)
        {
                /*
                 * Get terminal modes.
                 */
                (void)ioctl(2, TIOCGETP, &s);
                (void)ioctl(2, TIOCGLTC, &l);

                /*
                 * Save modes and set certain variables dependent on modes.
                 */
                save_term = s;
                ospeed = s.sg_ospeed;
                erase_char = s.sg_erase;
                kill_char = s.sg_kill;
                werase_char = l.t_werasc;

                /*
                 * Set the modes to the way we want them.
                 */
                s.sg_flags |= CBREAK;
                s.sg_flags &= ~(ECHO|XTABS);
        } else
        {
                /*
                 * Restore saved modes.
                 */
                s = save_term;
        }
        (void)ioctl(2, TIOCSETN, &s);
#endif
}

/*
 * Get terminal capabilities via termcap.
 */
void
get_term()
{
        char termbuf[2048];
        char *sp;
        char *term;
        int hard;
#ifdef TIOCGWINSZ
        struct winsize w;
#else
#ifdef WIOCGETD
        struct uwdata w;
#endif
#endif
        static char sbuf[1024];

        /*
         * Find out what kind of terminal this is.
         */
        if ((term = getenv("TERM")) == NULL)
                term = "unknown";
        if (tgetent(termbuf, term) <= 0)
                (void)strlcpy(termbuf, "dumb:co#80:hc:", sizeof(termbuf));

        /*
         * Get size of the screen.
         */
#ifdef TIOCGWINSZ
        if (ioctl(2, TIOCGWINSZ, &w) == 0 && w.ws_row > 0)
                sc_height = w.ws_row;
#else
#ifdef WIOCGETD
        if (ioctl(2, WIOCGETD, &w) == 0 && w.uw_height > 0)
                sc_height = w.uw_height/w.uw_vs;
#endif
#endif
        else
                sc_height = tgetnum("li");
        hard = (sc_height < 0 || tgetflag("hc"));
        if (hard) {
                /* Oh no, this is a hardcopy terminal. */
                sc_height = 24;
        }

#ifdef TIOCGWINSZ
        if (ioctl(2, TIOCGWINSZ, &w) == 0 && w.ws_col > 0)
                sc_width = w.ws_col;
        else
#ifdef WIOCGETD
        if (ioctl(2, WIOCGETD, &w) == 0 && w.uw_width > 0)
                sc_width = w.uw_width/w.uw_hs;
        else
#endif
#endif
                sc_width = tgetnum("co");
        if (sc_width < 0)
                sc_width = 80;

        auto_wrap = tgetflag("am");
        ignaw = tgetflag("xn");
        retain_below = tgetflag("db");

        /*
         * Assumes termcap variable "sg" is the printing width of
         * the standout sequence, the end standout sequence,
         * the underline sequence, the end underline sequence,
         * the boldface sequence, and the end boldface sequence.
         */
        if ((so_width = tgetnum("sg")) < 0)
                so_width = 0;
        be_width = bo_width = ue_width = ul_width = se_width = so_width;

        /*
         * Get various string-valued capabilities.
         */
        sp = sbuf;

        sc_pad = tgetstr("pc", &sp);
        if (sc_pad != NULL)
                PC = *sc_pad;

        sc_init = tgetstr("ti", &sp);
        if (sc_init == NULL)
                sc_init = "";

        sc_deinit= tgetstr("te", &sp);
        if (sc_deinit == NULL)
                sc_deinit = "";

        sc_eol_clear = tgetstr("ce", &sp);
        if (hard || sc_eol_clear == NULL || *sc_eol_clear == '\0')
        {
                sc_eol_clear = "";
        }

        sc_clear = tgetstr("cl", &sp);
        if (hard || sc_clear == NULL || *sc_clear == '\0')
        {
                sc_clear = "\n\n";
        }

        sc_move = tgetstr("cm", &sp);
        if (hard || sc_move == NULL || *sc_move == '\0')
        {
                /*
                 * This is not an error here, because we don't 
                 * always need sc_move.
                 * We need it only if we don't have home or lower-left.
                 */
                sc_move = "";
        }

        sc_s_in = tgetstr("so", &sp);
        if (hard || sc_s_in == NULL)
                sc_s_in = "";

        sc_s_out = tgetstr("se", &sp);
        if (hard || sc_s_out == NULL)
                sc_s_out = "";

        sc_u_in = tgetstr("us", &sp);
        if (hard || sc_u_in == NULL)
                sc_u_in = sc_s_in;

        sc_u_out = tgetstr("ue", &sp);
        if (hard || sc_u_out == NULL)
                sc_u_out = sc_s_out;

        sc_b_in = tgetstr("md", &sp);
        if (hard || sc_b_in == NULL)
        {
                sc_b_in = sc_s_in;
                sc_b_out = sc_s_out;
        } else
        {
                sc_b_out = tgetstr("me", &sp);
                if (hard || sc_b_out == NULL)
                        sc_b_out = "";
        }

        sc_home = tgetstr("ho", &sp);
        if (hard || sc_home == NULL || *sc_home == '\0')
        {
                if (*sc_move == '\0')
                {
                        /*
                         * This last resort for sc_home is supposed to
                         * be an up-arrow suggesting moving to the 
                         * top of the "virtual screen". (The one in
                         * your imagination as you try to use this on
                         * a hard copy terminal.)
                         */
                        sc_home = "|\b^";
                } else
                {
                        /* 
                         * No "home" string,
                         * but we can use "move(0,0)".
                         */
                        (void)strlcpy(sp, tgoto(sc_move, 0, 0),
                            sizeof(sbuf) - (sp - sbuf));
                        sc_home = sp;
                        sp += strlen(sp) + 1;
                }
        }

        sc_lower_left = tgetstr("ll", &sp);
        if (hard || sc_lower_left == NULL || *sc_lower_left == '\0')
        {
                if (*sc_move == '\0')
                {
                        sc_lower_left = "\r";
                } else
                {
                        /*
                         * No "lower-left" string, 
                         * but we can use "move(0,last-line)".
                         */
                        (void)strlcpy(sp, tgoto(sc_move, 0, sc_height-1),
                            sizeof(sbuf) - (sp - sbuf));
                        sc_lower_left = sp;
                        sp += strlen(sp) + 1;
                }
        }

        /*
         * To add a line at top of screen and scroll the display down,
         * we use "al" (add line) or "sr" (scroll reverse).
         */
        if ((sc_addline = tgetstr("al", &sp)) == NULL || 
                 *sc_addline == '\0')
                sc_addline = tgetstr("sr", &sp);

        if (hard || sc_addline == NULL || *sc_addline == '\0')
        {
                sc_addline = "";
                /* Force repaint on any backward movement */
                back_scroll = 0;
        }

        if (tgetflag("bs"))
                sc_backspace = "\b";
        else
        {
                sc_backspace = tgetstr("bc", &sp);
                if (sc_backspace == NULL || *sc_backspace == '\0')
                        sc_backspace = "\b";
        }
}


/*
 * Below are the functions which perform all the 
 * terminal-specific screen manipulation.
 */

/*
 * Initialize terminal
 */
void
init()
{
        tputs(sc_init, sc_height, putchr);
}

/*
 * Deinitialize terminal
 */
void
deinit()
{
        tputs(sc_deinit, sc_height, putchr);
}

/*
 * Home cursor (move to upper left corner of screen).
 */
void
home()
{
        tputs(sc_home, 1, putchr);
}

/*
 * Add a blank line (called with cursor at home).
 * Should scroll the display down.
 */
void
add_line()
{
        tputs(sc_addline, sc_height, putchr);
}

int short_file;                         /* if file less than a screen */
void
lower_left()
{
        if (short_file) {
                putchr('\r');
                flush();
        }
        else
                tputs(sc_lower_left, 1, putchr);
}

/*
 * Ring the terminal bell.
 */
void
bell()
{
        putchr('\7');
}

/*
 * Clear the screen.
 */
void
clear()
{
        tputs(sc_clear, sc_height, putchr);
}

/*
 * Clear from the cursor to the end of the cursor's line.
 * {{ This must not move the cursor. }}
 */
void
clear_eol()
{
        tputs(sc_eol_clear, 1, putchr);
}

/*
 * Begin "standout" (bold, underline, or whatever).
 */
void
so_enter()
{
        tputs(sc_s_in, 1, putchr);
}

/*
 * End "standout".
 */
void
so_exit()
{
        tputs(sc_s_out, 1, putchr);
}

/*
 * Begin "underline" (hopefully real underlining, 
 * otherwise whatever the terminal provides).
 */
void
ul_enter()
{
        tputs(sc_u_in, 1, putchr);
}

/*
 * End "underline".
 */
void
ul_exit()
{
        tputs(sc_u_out, 1, putchr);
}

/*
 * Begin "bold"
 */
void
bo_enter()
{
        tputs(sc_b_in, 1, putchr);
}

/*
 * End "bold".
 */
void
bo_exit()
{
        tputs(sc_b_out, 1, putchr);
}

/*
 * Erase the character to the left of the cursor 
 * and move the cursor left.
 */
void
backspace()
{
        /* 
         * Try to erase the previous character by overstriking with a space.
         */
        tputs(sc_backspace, 1, putchr);
        putchr(' ');
        tputs(sc_backspace, 1, putchr);
}

/*
 * Output a plain backspace, without erasing the previous char.
 */
void
putbs()
{
        tputs(sc_backspace, 1, putchr);
}