/*      $NetBSD: md.c,v 1.10 2022/01/29 16:01:20 martin Exp $ */

/*
 * Copyright 1997 Piermont Information Systems Inc.
 * All rights reserved.
 *
 * Based on code written by Philip A. Nelson for Piermont Information
 * Systems Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of Piermont Information Systems Inc. may not be used to endorse
 *    or promote products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY PIERMONT INFORMATION SYSTEMS INC. ``AS IS''
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL PIERMONT INFORMATION SYSTEMS INC. BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 */

/* md.c -- sandpoint machine specific routines */

#include <sys/param.h>
#include <sys/sysctl.h>
#include <sys/utsname.h>

#include <stdio.h>
#include <string.h>
#include <util.h>

#include "defs.h"
#include "md.h"
#include "msg_defs.h"
#include "menu_defs.h"

static char *prodname;

void
md_init(void)
{
}

void
md_init_set_status(int flags)
{
        static const char mib_name[] = "machdep.prodfamily";
        static char unknown[] = "unknown";
        size_t len;

        (void)flags;

        /*
         * Determine the product family of the board we are running on and
         * enable the installation of the corresponding GENERIC kernel.
         *
         * Note:  In md.h the two kernels are disabled.  If they are
         *        enabled there the logic here needs to be switched.
         */
        if (sysctlbyname(mib_name, NULL, &len, NULL, 0) != 0) {
                prodname = unknown;
                return;
        }
        prodname = malloc(len);
        sysctlbyname(mib_name, prodname, &len, NULL, 0);

        if (strcmp(prodname, "kurobox")==0 || strcmp(prodname, "kurot4")==0)
                /*
                 * Running on a KuroBox family product, so enable KUROBOX
                 */
                set_kernel_set(SET_KERNEL_2);
        else
                /*
                 * Otherwise enable GENERIC
                 */
                set_kernel_set(SET_KERNEL_1);
}

bool
md_get_info(struct install_partition_desc *install)
{
        int res;

        if (pm->no_mbr || pm->no_part)
                return true;

again:
        if (pm->parts == NULL) {

                const struct disk_partitioning_scheme *ps =
                    select_part_scheme(pm, NULL, true, NULL);

                if (!ps)
                        return false;

                struct disk_partitions *parts =
                   (*ps->create_new_for_disk)(pm->diskdev,
                   0, pm->dlsize, true, NULL);
                if (!parts)
                        return false;

                pm->parts = parts;
                if (ps->size_limit > 0 && pm->dlsize > ps->size_limit)
                        pm->dlsize = ps->size_limit;
        }

        res = set_bios_geom_with_mbr_guess(pm->parts);
        if (res == 0)
                return false;
        else if (res == 1)
                return true;

        pm->parts->pscheme->destroy_part_scheme(pm->parts);
        pm->parts = NULL;
        goto again;
}

/*
 * md back-end code for menu-driven BSD disklabel editor.
 */
int
md_make_bsd_partitions(struct install_partition_desc *install)
{
        return make_bsd_partitions(install);
}

/*
 * any additional partition validation
 */
bool
md_check_partitions(struct install_partition_desc *install)
{
        return true;
}

/*
 * hook called before writing new disklabel.
 */
bool
md_pre_disklabel(struct install_partition_desc *install,
    struct disk_partitions *parts)
{

        if (parts->parent == NULL)
                return true;    /* no outer partitions */

        parts = parts->parent;

        msg_display_subst(MSG_dofdisk, 3, parts->disk,
            msg_string(parts->pscheme->name),
            msg_string(parts->pscheme->short_name));

        /* write edited "MBR" onto disk. */
        if (!parts->pscheme->write_to_disk(parts)) {
                msg_display(MSG_wmbrfail);
                process_menu(MENU_ok, NULL);
                return false;
        }
        return true;
}

/*
 * hook called after writing disklabel to new target disk.
 */
bool
md_post_disklabel(struct install_partition_desc *install,
    struct disk_partitions *parts)
{
        return true;
}

/*
 * hook called after upgrade() or install() has finished setting
 * up the target disk but immediately before the user is given the
 * ``disks are now set up'' message.
 */
int
md_post_newfs(struct install_partition_desc *install)
{
        /* no boot blocks, we are using altboot */
        return 0;
}

int
md_post_extract(struct install_partition_desc *install, bool upgrade)
{
        return 0;
}

void
md_cleanup_install(struct install_partition_desc *install)
{
#ifndef DEBUG
        int new_speed;

        enable_rc_conf();

        /*
         * Set the console speed in /etc/ttys depending on the board.
         * The default speed is 115200, which is patched when needed.
         */
        if (strcmp(prodname, "kurobox")==0 || strcmp(prodname, "kurot4")==0)
                new_speed = 57600;                      /* KuroBox */

        else if (strcmp(prodname, "dlink") == 0 ||      /* D-Link DSM-G600 */
            strcmp(prodname, "nhnas") == 0)             /* NH23x, All6250 */
                new_speed = 9600;

        else
                new_speed = 0;

        if (new_speed != 0) {
                run_program(RUN_CHROOT, "sed -an -e 's/115200/%d/;H;$!d;g;w"
                    "/etc/ttys' /etc/ttys", new_speed);
        }
#endif
}

int
md_pre_update(struct install_partition_desc *install)
{
        return 1;
}

/* Upgrade support */
int
md_update(struct install_partition_desc *install)
{
        md_post_newfs(install);
        return 1;
}

int
md_check_mbr(struct disk_partitions *parts, mbr_info_t *mbri, bool quiet)
{
        return 2;
}

bool
md_parts_use_wholedisk(struct disk_partitions *parts)
{
        return parts_use_wholedisk(parts, 0, NULL);
}

int
md_pre_mount(struct install_partition_desc *install, size_t ndx)
{
        return 0;
}

bool
md_mbr_update_check(struct disk_partitions *parts, mbr_info_t *mbri)
{
        return false;   /* no change, no need to write back */
}

#ifdef HAVE_GPT
bool
md_gpt_post_write(struct disk_partitions *parts, part_id root_id,
    bool root_is_new, part_id efi_id, bool efi_is_new)
{
        /* no GPT boot support, nothing needs to be done here */
        return true;
}
#endif