sys/dev/pci/igc/igc_i225.c

950

DEBUGOUT1("Invalid effective Rx buffer size %d\n",

sys/dev/pci/igc/igc_mac.c

418

DEBUGOUT1("After fix-ups FlowControl is now = %x\n",

sys/dev/pci/igc/igc_mac.c

537

DEBUGOUT1("hw->fc.current_mode = %u\n", hw->fc.current_mode);

sys/dev/pci/igc/igc_mac.c

85

DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1);

sys/dev/pci/igc/igc_nvm.c

171

DEBUGOUT1("NVM read error: %d\n", ret_val);

sys/dev/pci/igc/igc_phy.c

185

DEBUGOUT1("PHY Address %d is out of range\n", offset);

sys/dev/pci/igc/igc_phy.c

243

DEBUGOUT1("PHY Address %d is out of range\n", offset);

sys/dev/pci/igc/igc_phy.c

339

DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised);

sys/dev/pci/igc/igc_phy.c

444

DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);

sys/dev/pci/ixgbe/ixgbe_82598.c

960

DEBUGOUT1("RAR index %d is out of range.\n", rar);

sys/dev/pci/ixgbe/ixgbe_82598.c

986

DEBUGOUT1("RAR index %d is out of range.\n", rar);

sys/dev/pci/ixgbe/ixgbe_common.c

1713

DEBUGOUT1("Detected EEPROM page size = %d words.",

sys/dev/pci/ixgbe/ixgbe_common.c

2542

DEBUGOUT1("Clearing RAR[1-%d]\n", rar_entries - 1);

sys/dev/pci/ixgbe/ixgbe_common.c

2586

DEBUGOUT1("Added a secondary address to RAR[%d]\n", rar);

sys/dev/pci/ixgbe/ixgbe_common.c

2630

DEBUGOUT1("Clearing RAR[1-%d]\n", uc_addr_in_use+1);

sys/dev/pci/ixgbe/ixgbe_common.c

2725

DEBUGOUT1(" bit-vector = 0x%03X\n", vector);

sys/dev/pci/ixgbe/ixgbe_common.c

363

DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg);

sys/dev/pci/ixgbe/ixgbe_common.c

382

DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg);

sys/dev/pci/ixgbe/ixgbe_common.c

424

DEBUGOUT1("Flow control setup failed, returning %d\n", ret_val);

sys/dev/pci/ixgbe/ixgbe_common.c

4595

DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);

sys/dev/pci/ixgbe/ixgbe_common.c

4684

DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);

sys/dev/pci/ixgbe/ixgbe_common.c

518

DEBUGOUT1("Failed to initialize HW, STATUS = %d\n", status);

sys/dev/pci/ixgbe/ixgbe_phy.c

1234

DEBUGOUT1("DELAY: %d MS\n", edata);

sys/dev/pci/ixgbe/ixgbe_phy.c

299

DEBUGOUT1("Unable to validate PHY address 0x%04X\n",

sys/dev/pci/ixgbe/ixgbe_phy.c

422

DEBUGOUT1("PHY ID HIGH is 0x%04X\n", phy_id);

sys/dev/pci/ixgbe/ixgbe_vf.c

417

DEBUGOUT1("MC Addr Count = %d\n", mc_addr_count);

sys/dev/pci/ixgbe/ixgbe_vf.c

431

DEBUGOUT1("Hash value = 0x%03X\n", vector);

sys/dev/pci/ixgbe/ixgbe_x550.c

1415

DEBUGOUT1("Issuing host interface command failed with Status = %d\n",

sys/dev/pci/ixgbe/ixgbe_x550.c

1422

DEBUGOUT1("Host interface command returned 0x%08x , returning IXGBE_ERR_FW_RESP_INVALID\n",

sys/dev/pci/ixgbe/ixgbe_x550.c

2620

DEBUGOUT1("Failed to stop adapter, STATUS = %d\n", status);

sys/dev/pci/ixgbe/ixgbe_x550.c

2632

DEBUGOUT1("Failed to initialize PHY ops, STATUS = %d\n",

sys/dev/pci/ixgbe/ixgbe_x550.c

2645

DEBUGOUT1("Failed to start the external PHY, STATUS = %d\n",

sys/dev/pci/ixgbe/ixgbe_x550.c

2730

DEBUGOUT1("Reset HW failed, STATUS = %d\n", status);

sys/dev/pci/ixgbe/ixgbe_x550.c

4496

DEBUGOUT1("Could not acquire SWFW semaphore, Status = %d\n",

sys/dev/pci/ixgbe/ixgbe_x550.c

4505

DEBUGOUT1("Could not acquire PHY token, Status = %d\n",

sys/dev/pci/ixgbe/ixgbe_x550.c

4515

DEBUGOUT1("Unable to retry acquiring the PHY token, Status = %d\n",

sys/dev/pci/ixgbe/ixgbe_x550.c

4521

DEBUGOUT1("Semaphore acquisition retries failed!: PHY ID = 0x%08X\n",