/*
 * Low-level exception handling
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 2004 - 2008 by Tensilica Inc.
 * Copyright (C) 2015 Cadence Design Systems Inc.
 *
 * Chris Zankel <chris@zankel.net>
 *
 */

#include <linux/linkage.h>
#include <linux/pgtable.h>
#include <asm/asm-offsets.h>
#include <asm/asmmacro.h>
#include <asm/processor.h>
#include <asm/coprocessor.h>
#include <asm/thread_info.h>
#include <asm/asm-uaccess.h>
#include <asm/unistd.h>
#include <asm/ptrace.h>
#include <asm/current.h>
#include <asm/page.h>
#include <asm/signal.h>
#include <asm/tlbflush.h>
#include <variant/tie-asm.h>

/*
 * Macro to find first bit set in WINDOWBASE from the left + 1
 *
 * 100....0 -> 1
 * 010....0 -> 2
 * 000....1 -> WSBITS
 */

        .macro ffs_ws bit mask

#if XCHAL_HAVE_NSA
        nsau    \bit, \mask                     # 32-WSBITS ... 31 (32 iff 0)
        addi    \bit, \bit, WSBITS - 32 + 1     # uppest bit set -> return 1
#else
        movi    \bit, WSBITS
#if WSBITS > 16
        _bltui  \mask, 0x10000, 99f
        addi    \bit, \bit, -16
        extui   \mask, \mask, 16, 16
#endif
#if WSBITS > 8
99:     _bltui  \mask, 0x100, 99f
        addi    \bit, \bit, -8
        srli    \mask, \mask, 8
#endif
99:     _bltui  \mask, 0x10, 99f
        addi    \bit, \bit, -4
        srli    \mask, \mask, 4
99:     _bltui  \mask, 0x4, 99f
        addi    \bit, \bit, -2
        srli    \mask, \mask, 2
99:     _bltui  \mask, 0x2, 99f
        addi    \bit, \bit, -1
99:

#endif
        .endm


        .macro  irq_save flags tmp
#if XTENSA_FAKE_NMI
#if defined(CONFIG_DEBUG_KERNEL) && (LOCKLEVEL | TOPLEVEL) >= XCHAL_DEBUGLEVEL
        rsr     \flags, ps
        extui   \tmp, \flags, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
        bgei    \tmp, LOCKLEVEL, 99f
        rsil    \tmp, LOCKLEVEL
99:
#else
        movi    \tmp, LOCKLEVEL
        rsr     \flags, ps
        or      \flags, \flags, \tmp
        xsr     \flags, ps
        rsync
#endif
#else
        rsil    \flags, LOCKLEVEL
#endif
        .endm

/* ----------------- DEFAULT FIRST LEVEL EXCEPTION HANDLERS ----------------- */

/*
 * First-level exception handler for user exceptions.
 * Save some special registers, extra states and all registers in the AR
 * register file that were in use in the user task, and jump to the common
 * exception code.
 * We save SAR (used to calculate WMASK), and WB and WS (we don't have to
 * save them for kernel exceptions).
 *
 * Entry condition for user_exception:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original value in depc
 *   a3:        a3
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave1:  dispatch table
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 *
 * Entry condition for _user_exception:
 *
 *   a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
 *   excsave has been restored, and
 *   stack pointer (a1) has been set.
 *
 * Note: _user_exception might be at an odd address. Don't use call0..call12
 */
        .literal_position

ENTRY(user_exception)

        /* Save a1, a2, a3, and set SP. */

        rsr     a0, depc
        s32i    a1, a2, PT_AREG1
        s32i    a0, a2, PT_AREG2
        s32i    a3, a2, PT_AREG3
        mov     a1, a2

        .globl _user_exception
_user_exception:

        /* Save SAR and turn off single stepping */

        movi    a2, 0
        wsr     a2, depc                # terminate user stack trace with 0
        rsr     a3, sar
        xsr     a2, icountlevel
        s32i    a3, a1, PT_SAR
        s32i    a2, a1, PT_ICOUNTLEVEL

#if XCHAL_HAVE_THREADPTR
        rur     a2, threadptr
        s32i    a2, a1, PT_THREADPTR
#endif

        /* Rotate ws so that the current windowbase is at bit0. */
        /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */

#if defined(USER_SUPPORT_WINDOWED)
        rsr     a2, windowbase
        rsr     a3, windowstart
        ssr     a2
        s32i    a2, a1, PT_WINDOWBASE
        s32i    a3, a1, PT_WINDOWSTART
        slli    a2, a3, 32-WSBITS
        src     a2, a3, a2
        srli    a2, a2, 32-WSBITS
        s32i    a2, a1, PT_WMASK        # needed for restoring registers
#else
        movi    a2, 0
        movi    a3, 1
        s32i    a2, a1, PT_WINDOWBASE
        s32i    a3, a1, PT_WINDOWSTART
        s32i    a3, a1, PT_WMASK
#endif

        /* Save only live registers. */

UABI_W  _bbsi.l a2, 1, .Lsave_window_registers
        s32i    a4, a1, PT_AREG4
        s32i    a5, a1, PT_AREG5
        s32i    a6, a1, PT_AREG6
        s32i    a7, a1, PT_AREG7
UABI_W  _bbsi.l a2, 2, .Lsave_window_registers
        s32i    a8, a1, PT_AREG8
        s32i    a9, a1, PT_AREG9
        s32i    a10, a1, PT_AREG10
        s32i    a11, a1, PT_AREG11
UABI_W  _bbsi.l a2, 3, .Lsave_window_registers
        s32i    a12, a1, PT_AREG12
        s32i    a13, a1, PT_AREG13
        s32i    a14, a1, PT_AREG14
        s32i    a15, a1, PT_AREG15

#if defined(USER_SUPPORT_WINDOWED)
        /* If only one valid frame skip saving regs. */

        beqi    a2, 1, common_exception

        /* Save the remaining registers.
         * We have to save all registers up to the first '1' from
         * the right, except the current frame (bit 0).
         * Assume a2 is:  001001000110001
         * All register frames starting from the top field to the marked '1'
         * must be saved.
         */
.Lsave_window_registers:
        addi    a3, a2, -1              # eliminate '1' in bit 0: yyyyxxww0
        neg     a3, a3                  # yyyyxxww0 -> YYYYXXWW1+1
        and     a3, a3, a2              # max. only one bit is set

        /* Find number of frames to save */

        ffs_ws  a0, a3                  # number of frames to the '1' from left

        /* Store information into WMASK:
         * bits 0..3: xxx1 masked lower 4 bits of the rotated windowstart,
         * bits 4...: number of valid 4-register frames
         */

        slli    a3, a0, 4               # number of frames to save in bits 8..4
        extui   a2, a2, 0, 4            # mask for the first 16 registers
        or      a2, a3, a2
        s32i    a2, a1, PT_WMASK        # needed when we restore the reg-file

        /* Save 4 registers at a time */

1:      rotw    -1
        s32i    a0, a5, PT_AREG_END - 16
        s32i    a1, a5, PT_AREG_END - 12
        s32i    a2, a5, PT_AREG_END - 8
        s32i    a3, a5, PT_AREG_END - 4
        addi    a0, a4, -1
        addi    a1, a5, -16
        _bnez   a0, 1b

        /* WINDOWBASE still in SAR! */

        rsr     a2, sar                 # original WINDOWBASE
        movi    a3, 1
        ssl     a2
        sll     a3, a3
        wsr     a3, windowstart         # set corresponding WINDOWSTART bit
        wsr     a2, windowbase          # and WINDOWSTART
        rsync

        /* We are back to the original stack pointer (a1) */
#endif
        /* Now, jump to the common exception handler. */

        j       common_exception

ENDPROC(user_exception)

/*
 * First-level exit handler for kernel exceptions
 * Save special registers and the live window frame.
 * Note: Even though we changes the stack pointer, we don't have to do a
 *       MOVSP here, as we do that when we return from the exception.
 *       (See comment in the kernel exception exit code)
 *
 * Entry condition for kernel_exception:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        a3
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: dispatch table
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 *
 * Entry condition for _kernel_exception:
 *
 *   a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
 *   excsave has been restored, and
 *   stack pointer (a1) has been set.
 *
 * Note: _kernel_exception might be at an odd address. Don't use call0..call12
 */

ENTRY(kernel_exception)

        /* Save a1, a2, a3, and set SP. */

        rsr     a0, depc                # get a2
        s32i    a1, a2, PT_AREG1
        s32i    a0, a2, PT_AREG2
        s32i    a3, a2, PT_AREG3
        mov     a1, a2

        .globl _kernel_exception
_kernel_exception:

        /* Save SAR and turn off single stepping */

        movi    a2, 0
        rsr     a3, sar
        xsr     a2, icountlevel
        s32i    a3, a1, PT_SAR
        s32i    a2, a1, PT_ICOUNTLEVEL

#if defined(__XTENSA_WINDOWED_ABI__)
        /* Rotate ws so that the current windowbase is at bit0. */
        /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */

        rsr     a2, windowbase          # don't need to save these, we only
        rsr     a3, windowstart         # need shifted windowstart: windowmask
        ssr     a2
        slli    a2, a3, 32-WSBITS
        src     a2, a3, a2
        srli    a2, a2, 32-WSBITS
        s32i    a2, a1, PT_WMASK        # needed for kernel_exception_exit
#endif

        /* Save only the live window-frame */

KABI_W  _bbsi.l a2, 1, 1f
        s32i    a4, a1, PT_AREG4
        s32i    a5, a1, PT_AREG5
        s32i    a6, a1, PT_AREG6
        s32i    a7, a1, PT_AREG7
KABI_W  _bbsi.l a2, 2, 1f
        s32i    a8, a1, PT_AREG8
        s32i    a9, a1, PT_AREG9
        s32i    a10, a1, PT_AREG10
        s32i    a11, a1, PT_AREG11
KABI_W  _bbsi.l a2, 3, 1f
        s32i    a12, a1, PT_AREG12
        s32i    a13, a1, PT_AREG13
        s32i    a14, a1, PT_AREG14
        s32i    a15, a1, PT_AREG15

#ifdef __XTENSA_WINDOWED_ABI__
        _bnei   a2, 1, 1f
        /* Copy spill slots of a0 and a1 to imitate movsp
         * in order to keep exception stack continuous
         */
        l32i    a3, a1, PT_KERNEL_SIZE
        l32i    a0, a1, PT_KERNEL_SIZE + 4
        s32e    a3, a1, -16
        s32e    a0, a1, -12
#endif
1:
        l32i    a0, a1, PT_AREG0        # restore saved a0
        wsr     a0, depc

/*
 * This is the common exception handler.
 * We get here from the user exception handler or simply by falling through
 * from the kernel exception handler.
 * Save the remaining special registers, switch to kernel mode, and jump
 * to the second-level exception handler.
 *
 */

common_exception:

        /* Save some registers, disable loops and clear the syscall flag. */

        rsr     a2, debugcause
        rsr     a3, epc1
        s32i    a2, a1, PT_DEBUGCAUSE
        s32i    a3, a1, PT_PC

        movi    a2, NO_SYSCALL
        rsr     a3, excvaddr
        s32i    a2, a1, PT_SYSCALL
        movi    a2, 0
        s32i    a3, a1, PT_EXCVADDR
#if XCHAL_HAVE_LOOPS
        xsr     a2, lcount
        s32i    a2, a1, PT_LCOUNT
#endif

#if XCHAL_HAVE_EXCLUSIVE
        /* Clear exclusive access monitor set by interrupted code */
        clrex
#endif

        /* It is now save to restore the EXC_TABLE_FIXUP variable. */

        rsr     a2, exccause
        movi    a3, 0
        rsr     a0, excsave1
        s32i    a2, a1, PT_EXCCAUSE
        s32i    a3, a0, EXC_TABLE_FIXUP

        /* All unrecoverable states are saved on stack, now, and a1 is valid.
         * Now we can allow exceptions again. In case we've got an interrupt
         * PS.INTLEVEL is set to LOCKLEVEL disabling furhter interrupts,
         * otherwise it's left unchanged.
         *
         * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X)
         */

        rsr     a3, ps
        s32i    a3, a1, PT_PS           # save ps

#if XTENSA_FAKE_NMI
        /* Correct PS needs to be saved in the PT_PS:
         * - in case of exception or level-1 interrupt it's in the PS,
         *   and is already saved.
         * - in case of medium level interrupt it's in the excsave2.
         */
        movi    a0, EXCCAUSE_MAPPED_NMI
        extui   a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
        beq     a2, a0, .Lmedium_level_irq
        bnei    a2, EXCCAUSE_LEVEL1_INTERRUPT, .Lexception
        beqz    a3, .Llevel1_irq        # level-1 IRQ sets ps.intlevel to 0

.Lmedium_level_irq:
        rsr     a0, excsave2
        s32i    a0, a1, PT_PS           # save medium-level interrupt ps
        bgei    a3, LOCKLEVEL, .Lexception

.Llevel1_irq:
        movi    a3, LOCKLEVEL

.Lexception:
KABI_W  movi    a0, PS_WOE_MASK
KABI_W  or      a3, a3, a0
#else
        addi    a2, a2, -EXCCAUSE_LEVEL1_INTERRUPT
        movi    a0, LOCKLEVEL
        extui   a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
                                        # a3 = PS.INTLEVEL
        moveqz  a3, a0, a2              # a3 = LOCKLEVEL iff interrupt
KABI_W  movi    a2, PS_WOE_MASK
KABI_W  or      a3, a3, a2
#endif

        /* restore return address (or 0 if return to userspace) */
        rsr     a0, depc
        wsr     a3, ps
        rsync                           # PS.WOE => rsync => overflow

        /* Save lbeg, lend */
#if XCHAL_HAVE_LOOPS
        rsr     a4, lbeg
        rsr     a3, lend
        s32i    a4, a1, PT_LBEG
        s32i    a3, a1, PT_LEND
#endif

        /* Save SCOMPARE1 */

#if XCHAL_HAVE_S32C1I
        rsr     a3, scompare1
        s32i    a3, a1, PT_SCOMPARE1
#endif

        /* Save optional registers. */

        save_xtregs_opt a1 a3 a4 a5 a6 a7 PT_XTREGS_OPT
        
#ifdef CONFIG_TRACE_IRQFLAGS
        rsr             abi_tmp0, ps
        extui           abi_tmp0, abi_tmp0, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
        beqz            abi_tmp0, 1f
        abi_call        trace_hardirqs_off
1:
#endif
#ifdef CONFIG_CONTEXT_TRACKING_USER
        l32i            abi_tmp0, a1, PT_PS
        bbci.l          abi_tmp0, PS_UM_BIT, 1f
        abi_call        user_exit_callable
1:
#endif

        /* Go to second-level dispatcher. Set up parameters to pass to the
         * exception handler and call the exception handler.
         */

        l32i            abi_arg1, a1, PT_EXCCAUSE       # pass EXCCAUSE
        rsr             abi_tmp0, excsave1
        addx4           abi_tmp0, abi_arg1, abi_tmp0
        l32i            abi_tmp0, abi_tmp0, EXC_TABLE_DEFAULT   # load handler
        mov             abi_arg0, a1                    # pass stack frame

        /* Call the second-level handler */

        abi_callx       abi_tmp0

        /* Jump here for exception exit */
        .global common_exception_return
common_exception_return:

#if XTENSA_FAKE_NMI
        l32i            abi_tmp0, a1, PT_EXCCAUSE
        movi            abi_tmp1, EXCCAUSE_MAPPED_NMI
        l32i            abi_saved1, a1, PT_PS
        beq             abi_tmp0, abi_tmp1, .Lrestore_state
#endif
.Ltif_loop:
        irq_save        abi_tmp0, abi_tmp1
#ifdef CONFIG_TRACE_IRQFLAGS
        abi_call        trace_hardirqs_off
#endif

        /* Jump if we are returning from kernel exceptions. */

        l32i            abi_saved1, a1, PT_PS
        GET_THREAD_INFO(abi_tmp0, a1)
        l32i            abi_saved0, abi_tmp0, TI_FLAGS
        _bbci.l         abi_saved1, PS_UM_BIT, .Lexit_tif_loop_kernel

        /* Specific to a user exception exit:
         * We need to check some flags for signal handling and rescheduling,
         * and have to restore WB and WS, extra states, and all registers
         * in the register file that were in use in the user task.
         * Note that we don't disable interrupts here. 
         */

        _bbsi.l         abi_saved0, TIF_NEED_RESCHED, .Lresched
        movi            abi_tmp0, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL
        bnone           abi_saved0, abi_tmp0, .Lexit_tif_loop_user

        l32i            abi_tmp0, a1, PT_DEPC
        bgeui           abi_tmp0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lrestore_state

        /* Call do_signal() */

#ifdef CONFIG_TRACE_IRQFLAGS
        abi_call        trace_hardirqs_on
#endif
        rsil            abi_tmp0, 0
        mov             abi_arg0, a1
        abi_call        do_notify_resume        # int do_notify_resume(struct pt_regs*)
        j               .Ltif_loop

.Lresched:
#ifdef CONFIG_TRACE_IRQFLAGS
        abi_call        trace_hardirqs_on
#endif
        rsil            abi_tmp0, 0
        abi_call        schedule        # void schedule (void)
        j               .Ltif_loop

.Lexit_tif_loop_kernel:
#ifdef CONFIG_PREEMPTION
        _bbci.l         abi_saved0, TIF_NEED_RESCHED, .Lrestore_state

        /* Check current_thread_info->preempt_count */

        l32i            abi_tmp1, abi_tmp0, TI_PRE_COUNT
        bnez            abi_tmp1, .Lrestore_state
        abi_call        preempt_schedule_irq
#endif
        j               .Lrestore_state

.Lexit_tif_loop_user:
#ifdef CONFIG_CONTEXT_TRACKING_USER
        abi_call        user_enter_callable
#endif
#ifdef CONFIG_HAVE_HW_BREAKPOINT
        _bbci.l         abi_saved0, TIF_DB_DISABLED, 1f
        abi_call        restore_dbreak
1:
#endif
#ifdef CONFIG_DEBUG_TLB_SANITY
        l32i            abi_tmp0, a1, PT_DEPC
        bgeui           abi_tmp0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lrestore_state
        abi_call        check_tlb_sanity
#endif

.Lrestore_state:
#ifdef CONFIG_TRACE_IRQFLAGS
        extui           abi_tmp0, abi_saved1, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
        bgei            abi_tmp0, LOCKLEVEL, 1f
        abi_call        trace_hardirqs_on
1:
#endif
        /*
         * Restore optional registers.
         * abi_arg* are used as temporary registers here.
         */

        load_xtregs_opt a1 abi_tmp0 abi_arg0 abi_arg1 abi_arg2 abi_arg3 PT_XTREGS_OPT

        /* Restore SCOMPARE1 */

#if XCHAL_HAVE_S32C1I
        l32i            abi_tmp0, a1, PT_SCOMPARE1
        wsr             abi_tmp0, scompare1
#endif
        wsr             abi_saved1, ps          /* disable interrupts */
        _bbci.l         abi_saved1, PS_UM_BIT, kernel_exception_exit

user_exception_exit:

        /* Restore the state of the task and return from the exception. */

#if defined(USER_SUPPORT_WINDOWED)
        /* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */

        l32i    a2, a1, PT_WINDOWBASE
        l32i    a3, a1, PT_WINDOWSTART
        wsr     a1, depc                # use DEPC as temp storage
        wsr     a3, windowstart         # restore WINDOWSTART
        ssr     a2                      # preserve user's WB in the SAR
        wsr     a2, windowbase          # switch to user's saved WB
        rsync
        rsr     a1, depc                # restore stack pointer
        l32i    a2, a1, PT_WMASK        # register frames saved (in bits 4...9)
        rotw    -1                      # we restore a4..a7
        _bltui  a6, 16, .Lclear_regs    # only have to restore current window?

        /* The working registers are a0 and a3.  We are restoring to
         * a4..a7.  Be careful not to destroy what we have just restored.
         * Note: wmask has the format YYYYM:
         *       Y: number of registers saved in groups of 4
         *       M: 4 bit mask of first 16 registers
         */

        mov     a2, a6
        mov     a3, a5

1:      rotw    -1                      # a0..a3 become a4..a7
        addi    a3, a7, -4*4            # next iteration
        addi    a2, a6, -16             # decrementing Y in WMASK
        l32i    a4, a3, PT_AREG_END + 0
        l32i    a5, a3, PT_AREG_END + 4
        l32i    a6, a3, PT_AREG_END + 8
        l32i    a7, a3, PT_AREG_END + 12
        _bgeui  a2, 16, 1b

        /* Clear unrestored registers (don't leak anything to user-land */

.Lclear_regs:
        rsr     a0, windowbase
        rsr     a3, sar
        sub     a3, a0, a3
        beqz    a3, 2f
        extui   a3, a3, 0, WBBITS

1:      rotw    -1
        addi    a3, a7, -1
        movi    a4, 0
        movi    a5, 0
        movi    a6, 0
        movi    a7, 0
        bgei    a3, 1, 1b

        /* We are back were we were when we started.
         * Note: a2 still contains WMASK (if we've returned to the original
         *       frame where we had loaded a2), or at least the lower 4 bits
         *       (if we have restored WSBITS-1 frames).
         */
2:
#else
        movi    a2, 1
#endif
#if XCHAL_HAVE_THREADPTR
        l32i    a3, a1, PT_THREADPTR
        wur     a3, threadptr
#endif

        j       common_exception_exit

        /* This is the kernel exception exit.
         * We avoided to do a MOVSP when we entered the exception, but we
         * have to do it here.
         */

kernel_exception_exit:

#if defined(__XTENSA_WINDOWED_ABI__)
        /* Check if we have to do a movsp.
         *
         * We only have to do a movsp if the previous window-frame has
         * been spilled to the *temporary* exception stack instead of the
         * task's stack. This is the case if the corresponding bit in
         * WINDOWSTART for the previous window-frame was set before
         * (not spilled) but is zero now (spilled).
         * If this bit is zero, all other bits except the one for the
         * current window frame are also zero. So, we can use a simple test:
         * 'and' WINDOWSTART and WINDOWSTART-1:
         *
         *  (XXXXXX1[0]* - 1) AND XXXXXX1[0]* = XXXXXX0[0]*
         *
         * The result is zero only if one bit was set.
         *
         * (Note: We might have gone through several task switches before
         *        we come back to the current task, so WINDOWBASE might be
         *        different from the time the exception occurred.)
         */

        /* Test WINDOWSTART before and after the exception.
         * We actually have WMASK, so we only have to test if it is 1 or not.
         */

        l32i    a2, a1, PT_WMASK
        _beqi   a2, 1, common_exception_exit    # Spilled before exception,jump

        /* Test WINDOWSTART now. If spilled, do the movsp */

        rsr     a3, windowstart
        addi    a0, a3, -1
        and     a3, a3, a0
        _bnez   a3, common_exception_exit

        /* Do a movsp (we returned from a call4, so we have at least a0..a7) */

        addi    a0, a1, -16
        l32i    a3, a0, 0
        l32i    a4, a0, 4
        s32i    a3, a1, PT_KERNEL_SIZE + 0
        s32i    a4, a1, PT_KERNEL_SIZE + 4
        l32i    a3, a0, 8
        l32i    a4, a0, 12
        s32i    a3, a1, PT_KERNEL_SIZE + 8
        s32i    a4, a1, PT_KERNEL_SIZE + 12

        /* Common exception exit.
         * We restore the special register and the current window frame, and
         * return from the exception.
         *
         * Note: We expect a2 to hold PT_WMASK
         */
#else
        movi    a2, 1
#endif

common_exception_exit:

        /* Restore address registers. */

        _bbsi.l a2, 1, 1f
        l32i    a4,  a1, PT_AREG4
        l32i    a5,  a1, PT_AREG5
        l32i    a6,  a1, PT_AREG6
        l32i    a7,  a1, PT_AREG7
        _bbsi.l a2, 2, 1f
        l32i    a8,  a1, PT_AREG8
        l32i    a9,  a1, PT_AREG9
        l32i    a10, a1, PT_AREG10
        l32i    a11, a1, PT_AREG11
        _bbsi.l a2, 3, 1f
        l32i    a12, a1, PT_AREG12
        l32i    a13, a1, PT_AREG13
        l32i    a14, a1, PT_AREG14
        l32i    a15, a1, PT_AREG15

        /* Restore PC, SAR */

1:      l32i    a2, a1, PT_PC
        l32i    a3, a1, PT_SAR
        wsr     a2, epc1
        wsr     a3, sar

        /* Restore LBEG, LEND, LCOUNT */
#if XCHAL_HAVE_LOOPS
        l32i    a2, a1, PT_LBEG
        l32i    a3, a1, PT_LEND
        wsr     a2, lbeg
        l32i    a2, a1, PT_LCOUNT
        wsr     a3, lend
        wsr     a2, lcount
#endif

        /* We control single stepping through the ICOUNTLEVEL register. */

        l32i    a2, a1, PT_ICOUNTLEVEL
        movi    a3, -2
        wsr     a2, icountlevel
        wsr     a3, icount

        /* Check if it was double exception. */

        l32i    a0, a1, PT_DEPC
        l32i    a3, a1, PT_AREG3
        l32i    a2, a1, PT_AREG2
        _bgeui  a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f

        /* Restore a0...a3 and return */

        l32i    a0, a1, PT_AREG0
        l32i    a1, a1, PT_AREG1
        rfe

1:      wsr     a0, depc
        l32i    a0, a1, PT_AREG0
        l32i    a1, a1, PT_AREG1
        rfde

ENDPROC(kernel_exception)

/*
 * Debug exception handler.
 *
 * Currently, we don't support KGDB, so only user application can be debugged.
 *
 * When we get here,  a0 is trashed and saved to excsave[debuglevel]
 */

        .literal_position

ENTRY(debug_exception)

        rsr     a0, SREG_EPS + XCHAL_DEBUGLEVEL
        bbsi.l  a0, PS_EXCM_BIT, .Ldebug_exception_in_exception # exception mode

        /* Set EPC1 and EXCCAUSE */

        wsr     a2, depc                # save a2 temporarily
        rsr     a2, SREG_EPC + XCHAL_DEBUGLEVEL
        wsr     a2, epc1

        movi    a2, EXCCAUSE_MAPPED_DEBUG
        wsr     a2, exccause

        /* Restore PS to the value before the debug exc but with PS.EXCM set.*/

        movi    a2, 1 << PS_EXCM_BIT
        or      a2, a0, a2
        wsr     a2, ps

        /* Switch to kernel/user stack, restore jump vector, and save a0 */

        bbsi.l  a2, PS_UM_BIT, .Ldebug_exception_user   # jump if user mode
        addi    a2, a1, -16 - PT_KERNEL_SIZE    # assume kernel stack

.Ldebug_exception_continue:
        l32i    a0, a3, DT_DEBUG_SAVE
        s32i    a1, a2, PT_AREG1
        s32i    a0, a2, PT_AREG0
        movi    a0, 0
        s32i    a0, a2, PT_DEPC         # mark it as a regular exception
        xsr     a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
        xsr     a0, depc
        s32i    a3, a2, PT_AREG3
        s32i    a0, a2, PT_AREG2
        mov     a1, a2

        /* Debug exception is handled as an exception, so interrupts will
         * likely be enabled in the common exception handler. Disable
         * preemption if we have HW breakpoints to preserve DEBUGCAUSE.DBNUM
         * meaning.
         */
#if defined(CONFIG_PREEMPT_COUNT) && defined(CONFIG_HAVE_HW_BREAKPOINT)
        GET_THREAD_INFO(a2, a1)
        l32i    a3, a2, TI_PRE_COUNT
        addi    a3, a3, 1
        s32i    a3, a2, TI_PRE_COUNT
#endif

        rsr     a2, ps
        bbsi.l  a2, PS_UM_BIT, _user_exception
        j       _kernel_exception

.Ldebug_exception_user:
        rsr     a2, excsave1
        l32i    a2, a2, EXC_TABLE_KSTK  # load kernel stack pointer
        j       .Ldebug_exception_continue

.Ldebug_exception_in_exception:
#ifdef CONFIG_HAVE_HW_BREAKPOINT
        /* Debug exception while in exception mode. This may happen when
         * window overflow/underflow handler or fast exception handler hits
         * data breakpoint, in which case save and disable all data
         * breakpoints, single-step faulting instruction and restore data
         * breakpoints.
         */

        bbci.l  a0, PS_UM_BIT, .Ldebug_exception_in_exception   # jump if kernel mode

        rsr     a0, debugcause
        bbsi.l  a0, DEBUGCAUSE_DBREAK_BIT, .Ldebug_save_dbreak

        .set    _index, 0
        .rept   XCHAL_NUM_DBREAK
        l32i    a0, a3, DT_DBREAKC_SAVE + _index * 4
        wsr     a0, SREG_DBREAKC + _index
        .set    _index, _index + 1
        .endr

        l32i    a0, a3, DT_ICOUNT_LEVEL_SAVE
        wsr     a0, icountlevel

        l32i    a0, a3, DT_ICOUNT_SAVE
        xsr     a0, icount

        l32i    a0, a3, DT_DEBUG_SAVE
        xsr     a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
        rfi     XCHAL_DEBUGLEVEL

.Ldebug_save_dbreak:
        .set    _index, 0
        .rept   XCHAL_NUM_DBREAK
        movi    a0, 0
        xsr     a0, SREG_DBREAKC + _index
        s32i    a0, a3, DT_DBREAKC_SAVE + _index * 4
        .set    _index, _index + 1
        .endr

        movi    a0, XCHAL_EXCM_LEVEL + 1
        xsr     a0, icountlevel
        s32i    a0, a3, DT_ICOUNT_LEVEL_SAVE

        movi    a0, 0xfffffffe
        xsr     a0, icount
        s32i    a0, a3, DT_ICOUNT_SAVE

        l32i    a0, a3, DT_DEBUG_SAVE
        xsr     a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
        rfi     XCHAL_DEBUGLEVEL
#else
        /* Debug exception while in exception mode. Should not happen. */
        j       .Ldebug_exception_in_exception  // FIXME!!
#endif

ENDPROC(debug_exception)

/*
 * We get here in case of an unrecoverable exception.
 * The only thing we can do is to be nice and print a panic message.
 * We only produce a single stack frame for panic, so ???
 *
 *
 * Entry conditions:
 *
 *   - a0 contains the caller address; original value saved in excsave1.
 *   - the original a0 contains a valid return address (backtrace) or 0.
 *   - a2 contains a valid stackpointer
 *
 * Notes:
 *
 *   - If the stack pointer could be invalid, the caller has to setup a
 *     dummy stack pointer (e.g. the stack of the init_task)
 *
 *   - If the return address could be invalid, the caller has to set it
 *     to 0, so the backtrace would stop.
 *
 */
        .align 4
unrecoverable_text:
        .ascii "Unrecoverable error in exception handler\0"

        .literal_position

ENTRY(unrecoverable_exception)

#if XCHAL_HAVE_WINDOWED
        movi    a0, 1
        movi    a1, 0

        wsr     a0, windowstart
        wsr     a1, windowbase
        rsync
#endif

        movi    a1, KERNEL_PS_WOE_MASK | LOCKLEVEL
        wsr     a1, ps
        rsync

        movi    a1, init_task
        movi    a0, 0
        addi    a1, a1, PT_REGS_OFFSET

        movi    abi_arg0, unrecoverable_text
        abi_call        panic

1:      j       1b

ENDPROC(unrecoverable_exception)

/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */

        __XTENSA_HANDLER
        .literal_position

#ifdef SUPPORT_WINDOWED
/*
 * Fast-handler for alloca exceptions
 *
 *  The ALLOCA handler is entered when user code executes the MOVSP
 *  instruction and the caller's frame is not in the register file.
 *
 * This algorithm was taken from the Ross Morley's RTOS Porting Layer:
 *
 *    /home/ross/rtos/porting/XtensaRTOS-PortingLayer-20090507/xtensa_vectors.S
 *
 * It leverages the existing window spill/fill routines and their support for
 * double exceptions. The 'movsp' instruction will only cause an exception if
 * the next window needs to be loaded. In fact this ALLOCA exception may be
 * replaced at some point by changing the hardware to do a underflow exception
 * of the proper size instead.
 *
 * This algorithm simply backs out the register changes started by the user
 * exception handler, makes it appear that we have started a window underflow
 * by rotating the window back and then setting the old window base (OWB) in
 * the 'ps' register with the rolled back window base. The 'movsp' instruction
 * will be re-executed and this time since the next window frames is in the
 * active AR registers it won't cause an exception.
 *
 * If the WindowUnderflow code gets a TLB miss the page will get mapped
 * the partial WindowUnderflow will be handled in the double exception
 * handler.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        a3
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: dispatch table
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 */

ENTRY(fast_alloca)
        rsr     a0, windowbase
        rotw    -1
        rsr     a2, ps
        extui   a3, a2, PS_OWB_SHIFT, PS_OWB_WIDTH
        xor     a3, a3, a4
        l32i    a4, a6, PT_AREG0
        l32i    a1, a6, PT_DEPC
        rsr     a6, depc
        wsr     a1, depc
        slli    a3, a3, PS_OWB_SHIFT
        xor     a2, a2, a3
        wsr     a2, ps
        rsync

        _bbci.l a4, 31, 4f
        rotw    -1
        _bbci.l a8, 30, 8f
        rotw    -1
        j       _WindowUnderflow12
8:      j       _WindowUnderflow8
4:      j       _WindowUnderflow4
ENDPROC(fast_alloca)
#endif

#ifdef CONFIG_USER_ABI_CALL0_PROBE
/*
 * fast illegal instruction handler.
 *
 * This is used to fix up user PS.WOE on the exception caused
 * by the first opcode related to register window. If PS.WOE is
 * already set it goes directly to the common user exception handler.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        a3
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: dispatch table
 */

ENTRY(fast_illegal_instruction_user)

        rsr     a0, ps
        bbsi.l  a0, PS_WOE_BIT, 1f
        s32i    a3, a2, PT_AREG3
        movi    a3, PS_WOE_MASK
        or      a0, a0, a3
        wsr     a0, ps
#ifdef CONFIG_USER_ABI_CALL0_PROBE
        GET_THREAD_INFO(a3, a2)
        rsr     a0, epc1
        s32i    a0, a3, TI_PS_WOE_FIX_ADDR
#endif
        l32i    a3, a2, PT_AREG3
        l32i    a0, a2, PT_AREG0
        rsr     a2, depc
        rfe
1:
        call0   user_exception

ENDPROC(fast_illegal_instruction_user)
#endif

        /*
 * fast system calls.
 *
 * WARNING:  The kernel doesn't save the entire user context before
 * handling a fast system call.  These functions are small and short,
 * usually offering some functionality not available to user tasks.
 *
 * BE CAREFUL TO PRESERVE THE USER'S CONTEXT.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        a3
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: dispatch table
 */

ENTRY(fast_syscall_user)

        /* Skip syscall. */

        rsr     a0, epc1
        addi    a0, a0, 3
        wsr     a0, epc1

        l32i    a0, a2, PT_DEPC
        bgeui   a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable

        rsr     a0, depc                        # get syscall-nr
        _beqz   a0, fast_syscall_spill_registers
        _beqi   a0, __NR_xtensa, fast_syscall_xtensa

        call0   user_exception

ENDPROC(fast_syscall_user)

ENTRY(fast_syscall_unrecoverable)

        /* Restore all states. */

        l32i    a0, a2, PT_AREG0        # restore a0
        xsr     a2, depc                # restore a2, depc

        wsr     a0, excsave1
        call0   unrecoverable_exception

ENDPROC(fast_syscall_unrecoverable)

/*
 * sysxtensa syscall handler
 *
 * int sysxtensa (SYS_XTENSA_ATOMIC_SET,     ptr, val,    unused);
 * int sysxtensa (SYS_XTENSA_ATOMIC_ADD,     ptr, val,    unused);
 * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val,    unused);
 * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
 *        a2            a6                   a3    a4      a5
 *
 * Entry condition:
 *
 *   a0:        a2 (syscall-nr), original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in a0 and DEPC
 *   a3:        a3
 *   a4..a15:   unchanged
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: dispatch table
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 *
 * Note: we don't have to save a2; a2 holds the return value
 */

        .literal_position

#ifdef CONFIG_FAST_SYSCALL_XTENSA

ENTRY(fast_syscall_xtensa)

        s32i    a7, a2, PT_AREG7        # we need an additional register
        movi    a7, 4                   # sizeof(unsigned int)
        access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp

        _bgeui  a6, SYS_XTENSA_COUNT, .Lill
        _bnei   a6, SYS_XTENSA_ATOMIC_CMP_SWP, .Lnswp

        /* Fall through for ATOMIC_CMP_SWP. */

.Lswp:  /* Atomic compare and swap */

EX(.Leac) l32i  a0, a3, 0               # read old value
        bne     a0, a4, 1f              # same as old value? jump
EX(.Leac) s32i  a5, a3, 0               # different, modify value
        l32i    a7, a2, PT_AREG7        # restore a7
        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, 1                   # and return 1
        rfe

1:      l32i    a7, a2, PT_AREG7        # restore a7
        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, 0                   # return 0 (note that we cannot set
        rfe

.Lnswp: /* Atomic set, add, and exg_add. */

EX(.Leac) l32i  a7, a3, 0               # orig
        addi    a6, a6, -SYS_XTENSA_ATOMIC_SET
        add     a0, a4, a7              # + arg
        moveqz  a0, a4, a6              # set
        addi    a6, a6, SYS_XTENSA_ATOMIC_SET
EX(.Leac) s32i  a0, a3, 0               # write new value

        mov     a0, a2
        mov     a2, a7
        l32i    a7, a0, PT_AREG7        # restore a7
        l32i    a0, a0, PT_AREG0        # restore a0
        rfe

.Leac:  l32i    a7, a2, PT_AREG7        # restore a7
        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, -EFAULT
        rfe

.Lill:  l32i    a7, a2, PT_AREG7        # restore a7
        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, -EINVAL
        rfe

ENDPROC(fast_syscall_xtensa)

#else /* CONFIG_FAST_SYSCALL_XTENSA */

ENTRY(fast_syscall_xtensa)

        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, -ENOSYS
        rfe

ENDPROC(fast_syscall_xtensa)

#endif /* CONFIG_FAST_SYSCALL_XTENSA */


/* fast_syscall_spill_registers.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        a3
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: dispatch table
 *
 * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
 */

#if defined(CONFIG_FAST_SYSCALL_SPILL_REGISTERS) && \
                defined(USER_SUPPORT_WINDOWED)

ENTRY(fast_syscall_spill_registers)

        /* Register a FIXUP handler (pass current wb as a parameter) */

        xsr     a3, excsave1
        movi    a0, fast_syscall_spill_registers_fixup
        s32i    a0, a3, EXC_TABLE_FIXUP
        rsr     a0, windowbase
        s32i    a0, a3, EXC_TABLE_PARAM
        xsr     a3, excsave1            # restore a3 and excsave_1

        /* Save a3, a4 and SAR on stack. */

        rsr     a0, sar
        s32i    a3, a2, PT_AREG3
        s32i    a0, a2, PT_SAR

        /* The spill routine might clobber a4, a7, a8, a11, a12, and a15. */

        s32i    a4, a2, PT_AREG4
        s32i    a7, a2, PT_AREG7
        s32i    a8, a2, PT_AREG8
        s32i    a11, a2, PT_AREG11
        s32i    a12, a2, PT_AREG12
        s32i    a15, a2, PT_AREG15

        /*
         * Rotate ws so that the current windowbase is at bit 0.
         * Assume ws = xxxwww1yy (www1 current window frame).
         * Rotate ws right so that a4 = yyxxxwww1.
         */

        rsr     a0, windowbase
        rsr     a3, windowstart         # a3 = xxxwww1yy
        ssr     a0                      # holds WB
        slli    a0, a3, WSBITS
        or      a3, a3, a0              # a3 = xxxwww1yyxxxwww1yy
        srl     a3, a3                  # a3 = 00xxxwww1yyxxxwww1

        /* We are done if there are no more than the current register frame. */

        extui   a3, a3, 1, WSBITS-1     # a3 = 0yyxxxwww
        movi    a0, (1 << (WSBITS-1))
        _beqz   a3, .Lnospill           # only one active frame? jump

        /* We want 1 at the top, so that we return to the current windowbase */

        or      a3, a3, a0              # 1yyxxxwww

        /* Skip empty frames - get 'oldest' WINDOWSTART-bit. */

        wsr     a3, windowstart         # save shifted windowstart
        neg     a0, a3
        and     a3, a0, a3              # first bit set from right: 000010000

        ffs_ws  a0, a3                  # a0: shifts to skip empty frames
        movi    a3, WSBITS
        sub     a0, a3, a0              # WSBITS-a0:number of 0-bits from right
        ssr     a0                      # save in SAR for later.

        rsr     a3, windowbase
        add     a3, a3, a0
        wsr     a3, windowbase
        rsync

        rsr     a3, windowstart
        srl     a3, a3                  # shift windowstart

        /* WB is now just one frame below the oldest frame in the register
           window. WS is shifted so the oldest frame is in bit 0, thus, WB
           and WS differ by one 4-register frame. */

        /* Save frames. Depending what call was used (call4, call8, call12),
         * we have to save 4,8. or 12 registers.
         */


.Lloop: _bbsi.l a3, 1, .Lc4
        _bbci.l a3, 2, .Lc12

.Lc8:   s32e    a4, a13, -16
        l32e    a4, a5, -12
        s32e    a8, a4, -32
        s32e    a5, a13, -12
        s32e    a6, a13, -8
        s32e    a7, a13, -4
        s32e    a9, a4, -28
        s32e    a10, a4, -24
        s32e    a11, a4, -20
        srli    a11, a3, 2              # shift windowbase by 2
        rotw    2
        _bnei   a3, 1, .Lloop
        j       .Lexit

.Lc4:   s32e    a4, a9, -16
        s32e    a5, a9, -12
        s32e    a6, a9, -8
        s32e    a7, a9, -4

        srli    a7, a3, 1
        rotw    1
        _bnei   a3, 1, .Lloop
        j       .Lexit

.Lc12:  _bbci.l a3, 3, .Linvalid_mask   # bit 2 shouldn't be zero!

        /* 12-register frame (call12) */

        l32e    a0, a5, -12
        s32e    a8, a0, -48
        mov     a8, a0

        s32e    a9, a8, -44
        s32e    a10, a8, -40
        s32e    a11, a8, -36
        s32e    a12, a8, -32
        s32e    a13, a8, -28
        s32e    a14, a8, -24
        s32e    a15, a8, -20
        srli    a15, a3, 3

        /* The stack pointer for a4..a7 is out of reach, so we rotate the
         * window, grab the stackpointer, and rotate back.
         * Alternatively, we could also use the following approach, but that
         * makes the fixup routine much more complicated:
         * rotw 1
         * s32e a0, a13, -16
         * ...
         * rotw 2
         */

        rotw    1
        mov     a4, a13
        rotw    -1

        s32e    a4, a8, -16
        s32e    a5, a8, -12
        s32e    a6, a8, -8
        s32e    a7, a8, -4

        rotw    3

        _beqi   a3, 1, .Lexit
        j       .Lloop

.Lexit:

        /* Done. Do the final rotation and set WS */

        rotw    1
        rsr     a3, windowbase
        ssl     a3
        movi    a3, 1
        sll     a3, a3
        wsr     a3, windowstart
.Lnospill:

        /* Advance PC, restore registers and SAR, and return from exception. */

        l32i    a3, a2, PT_SAR
        l32i    a0, a2, PT_AREG0
        wsr     a3, sar
        l32i    a3, a2, PT_AREG3

        /* Restore clobbered registers. */

        l32i    a4, a2, PT_AREG4
        l32i    a7, a2, PT_AREG7
        l32i    a8, a2, PT_AREG8
        l32i    a11, a2, PT_AREG11
        l32i    a12, a2, PT_AREG12
        l32i    a15, a2, PT_AREG15

        movi    a2, 0
        rfe

.Linvalid_mask:

        /* We get here because of an unrecoverable error in the window
         * registers, so set up a dummy frame and kill the user application.
         * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
         */

        movi    a0, 1
        movi    a1, 0

        wsr     a0, windowstart
        wsr     a1, windowbase
        rsync

        movi    a0, 0

        rsr     a3, excsave1
        l32i    a1, a3, EXC_TABLE_KSTK

        movi    a4, KERNEL_PS_WOE_MASK | LOCKLEVEL
        wsr     a4, ps
        rsync

        movi    abi_arg0, SIGSEGV
        abi_call        make_task_dead

        /* shouldn't return, so panic */

        wsr     a0, excsave1
        call0   unrecoverable_exception         # should not return
1:      j       1b


ENDPROC(fast_syscall_spill_registers)

/* Fixup handler.
 *
 * We get here if the spill routine causes an exception, e.g. tlb miss.
 * We basically restore WINDOWBASE and WINDOWSTART to the condition when
 * we entered the spill routine and jump to the user exception handler.
 *
 * Note that we only need to restore the bits in windowstart that have not
 * been spilled yet by the _spill_register routine. Luckily, a3 contains a
 * rotated windowstart with only those bits set for frames that haven't been
 * spilled yet. Because a3 is rotated such that bit 0 represents the register
 * frame for the current windowbase - 1, we need to rotate a3 left by the
 * value of the current windowbase + 1 and move it to windowstart.
 *
 * a0: value of depc, original value in depc
 * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
 * a3: exctable, original value in excsave1
 */

ENTRY(fast_syscall_spill_registers_fixup)

        rsr     a2, windowbase  # get current windowbase (a2 is saved)
        xsr     a0, depc        # restore depc and a0
        ssl     a2              # set shift (32 - WB)

        /* We need to make sure the current registers (a0-a3) are preserved.
         * To do this, we simply set the bit for the current window frame
         * in WS, so that the exception handlers save them to the task stack.
         *
         * Note: we use a3 to set the windowbase, so we take a special care
         * of it, saving it in the original _spill_registers frame across
         * the exception handler call.
         */

        xsr     a3, excsave1    # get spill-mask
        slli    a3, a3, 1       # shift left by one
        addi    a3, a3, 1       # set the bit for the current window frame

        slli    a2, a3, 32-WSBITS
        src     a2, a3, a2      # a2 = xxwww1yyxxxwww1yy......
        wsr     a2, windowstart # set corrected windowstart

        srli    a3, a3, 1
        rsr     a2, excsave1
        l32i    a2, a2, EXC_TABLE_DOUBLE_SAVE   # restore a2
        xsr     a2, excsave1
        s32i    a3, a2, EXC_TABLE_DOUBLE_SAVE   # save a3
        l32i    a3, a2, EXC_TABLE_PARAM # original WB (in user task)
        xsr     a2, excsave1

        /* Return to the original (user task) WINDOWBASE.
         * We leave the following frame behind:
         * a0, a1, a2   same
         * a3:          trashed (saved in EXC_TABLE_DOUBLE_SAVE)
         * depc:        depc (we have to return to that address)
         * excsave_1:   exctable
         */

        wsr     a3, windowbase
        rsync

        /* We are now in the original frame when we entered _spill_registers:
         *  a0: return address
         *  a1: used, stack pointer
         *  a2: kernel stack pointer
         *  a3: available
         *  depc: exception address
         *  excsave: exctable
         * Note: This frame might be the same as above.
         */

        /* Setup stack pointer. */

        addi    a2, a2, -PT_USER_SIZE
        s32i    a0, a2, PT_AREG0

        /* Make sure we return to this fixup handler. */

        movi    a3, fast_syscall_spill_registers_fixup_return
        s32i    a3, a2, PT_DEPC         # setup depc

        /* Jump to the exception handler. */

        rsr     a3, excsave1
        rsr     a0, exccause
        addx4   a0, a0, a3                      # find entry in table
        l32i    a0, a0, EXC_TABLE_FAST_USER     # load handler
        l32i    a3, a3, EXC_TABLE_DOUBLE_SAVE
        jx      a0

ENDPROC(fast_syscall_spill_registers_fixup)

ENTRY(fast_syscall_spill_registers_fixup_return)

        /* When we return here, all registers have been restored (a2: DEPC) */

        wsr     a2, depc                # exception address

        /* Restore fixup handler. */

        rsr     a2, excsave1
        s32i    a3, a2, EXC_TABLE_DOUBLE_SAVE
        movi    a3, fast_syscall_spill_registers_fixup
        s32i    a3, a2, EXC_TABLE_FIXUP
        rsr     a3, windowbase
        s32i    a3, a2, EXC_TABLE_PARAM
        l32i    a2, a2, EXC_TABLE_KSTK

        /* Load WB at the time the exception occurred. */

        rsr     a3, sar                 # WB is still in SAR
        neg     a3, a3
        wsr     a3, windowbase
        rsync

        rsr     a3, excsave1
        l32i    a3, a3, EXC_TABLE_DOUBLE_SAVE

        rfde

ENDPROC(fast_syscall_spill_registers_fixup_return)

#else /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */

ENTRY(fast_syscall_spill_registers)

        l32i    a0, a2, PT_AREG0        # restore a0
        movi    a2, -ENOSYS
        rfe

ENDPROC(fast_syscall_spill_registers)

#endif /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */

#ifdef CONFIG_MMU
/*
 * We should never get here. Bail out!
 */

ENTRY(fast_second_level_miss_double_kernel)

1:
        call0   unrecoverable_exception         # should not return
1:      j       1b

ENDPROC(fast_second_level_miss_double_kernel)

/* First-level entry handler for user, kernel, and double 2nd-level
 * TLB miss exceptions.  Note that for now, user and kernel miss
 * exceptions share the same entry point and are handled identically.
 *
 * An old, less-efficient C version of this function used to exist.
 * We include it below, interleaved as comments, for reference.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        a3
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: dispatch table
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 */

ENTRY(fast_second_level_miss)

        /* Save a1 and a3. Note: we don't expect a double exception. */

        s32i    a1, a2, PT_AREG1
        s32i    a3, a2, PT_AREG3

        /* We need to map the page of PTEs for the user task.  Find
         * the pointer to that page.  Also, it's possible for tsk->mm
         * to be NULL while tsk->active_mm is nonzero if we faulted on
         * a vmalloc address.  In that rare case, we must use
         * active_mm instead to avoid a fault in this handler.  See
         *
         * http://mail.nl.linux.org/linux-mm/2002-08/msg00258.html
         *   (or search Internet on "mm vs. active_mm")
         *
         *      if (!mm)
         *              mm = tsk->active_mm;
         *      pgd = pgd_offset (mm, regs->excvaddr);
         *      pmd = pmd_offset (pgd, regs->excvaddr);
         *      pmdval = *pmd;
         */

        GET_CURRENT(a1,a2)
        l32i    a0, a1, TASK_MM         # tsk->mm
        beqz    a0, .Lfast_second_level_miss_no_mm

.Lfast_second_level_miss_continue:
        rsr     a3, excvaddr            # fault address
        _PGD_OFFSET(a0, a3, a1)
        l32i    a0, a0, 0               # read pmdval
        beqz    a0, .Lfast_second_level_miss_no_pmd

        /* Read ptevaddr and convert to top of page-table page.
         *
         *      vpnval = read_ptevaddr_register() & PAGE_MASK;
         *      vpnval += DTLB_WAY_PGTABLE;
         *      pteval = mk_pte (virt_to_page(pmd_val(pmdval)), PAGE_KERNEL);
         *      write_dtlb_entry (pteval, vpnval);
         *
         * The messy computation for 'pteval' above really simplifies
         * into the following:
         *
         * pteval = ((pmdval - PAGE_OFFSET + PHYS_OFFSET) & PAGE_MASK)
         *                 | PAGE_DIRECTORY
         */

        movi    a1, (PHYS_OFFSET - PAGE_OFFSET) & 0xffffffff
        add     a0, a0, a1              # pmdval - PAGE_OFFSET
        extui   a1, a0, 0, PAGE_SHIFT   # ... & PAGE_MASK
        xor     a0, a0, a1

        movi    a1, _PAGE_DIRECTORY
        or      a0, a0, a1              # ... | PAGE_DIRECTORY

        /*
         * We utilize all three wired-ways (7-9) to hold pmd translations.
         * Memory regions are mapped to the DTLBs according to bits 28 and 29.
         * This allows to map the three most common regions to three different
         * DTLBs:
         *  0,1 -> way 7        program (0040.0000) and virtual (c000.0000)
         *  2   -> way 8        shared libaries (2000.0000)
         *  3   -> way 0        stack (3000.0000)
         */

        extui   a3, a3, 28, 2           # addr. bit 28 and 29   0,1,2,3
        rsr     a1, ptevaddr
        addx2   a3, a3, a3              # ->                    0,3,6,9
        srli    a1, a1, PAGE_SHIFT
        extui   a3, a3, 2, 2            # ->                    0,0,1,2
        slli    a1, a1, PAGE_SHIFT      # ptevaddr & PAGE_MASK
        addi    a3, a3, DTLB_WAY_PGD
        add     a1, a1, a3              # ... + way_number

.Lfast_second_level_miss_wdtlb:
        wdtlb   a0, a1
        dsync

        /* Exit critical section. */
.Lfast_second_level_miss_skip_wdtlb:
        rsr     a3, excsave1
        movi    a0, 0
        s32i    a0, a3, EXC_TABLE_FIXUP

        /* Restore the working registers, and return. */

        l32i    a0, a2, PT_AREG0
        l32i    a1, a2, PT_AREG1
        l32i    a3, a2, PT_AREG3
        l32i    a2, a2, PT_DEPC

        bgeui   a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f

        /* Restore excsave1 and return. */

        rsr     a2, depc
        rfe

        /* Return from double exception. */

1:      xsr     a2, depc
        esync
        rfde

.Lfast_second_level_miss_no_mm:
        l32i    a0, a1, TASK_ACTIVE_MM  # unlikely case mm == 0
        bnez    a0, .Lfast_second_level_miss_continue

        /* Even more unlikely case active_mm == 0.
         * We can get here with NMI in the middle of context_switch that
         * touches vmalloc area.
         */
        movi    a0, init_mm
        j       .Lfast_second_level_miss_continue

.Lfast_second_level_miss_no_pmd:
#if (DCACHE_WAY_SIZE > PAGE_SIZE)

        /* Special case for cache aliasing.
         * We (should) only get here if a clear_user_page, copy_user_page
         * or the aliased cache flush functions got preemptively interrupted 
         * by another task. Re-establish temporary mapping to the 
         * TLBTEMP_BASE areas.
         */

        /* We shouldn't be in a double exception */

        l32i    a0, a2, PT_DEPC
        bgeui   a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lfast_second_level_miss_slow

        /* Make sure the exception originated in the special functions */

        movi    a0, __tlbtemp_mapping_start
        rsr     a3, epc1
        bltu    a3, a0, .Lfast_second_level_miss_slow
        movi    a0, __tlbtemp_mapping_end
        bgeu    a3, a0, .Lfast_second_level_miss_slow

        /* Check if excvaddr was in one of the TLBTEMP_BASE areas. */

        movi    a3, TLBTEMP_BASE_1
        rsr     a0, excvaddr
        bltu    a0, a3, .Lfast_second_level_miss_slow

        addi    a1, a0, -TLBTEMP_SIZE
        bgeu    a1, a3, .Lfast_second_level_miss_slow

        /* Check if we have to restore an ITLB mapping. */

        movi    a1, __tlbtemp_mapping_itlb
        rsr     a3, epc1
        sub     a3, a3, a1

        /* Calculate VPN */

        movi    a1, PAGE_MASK
        and     a1, a1, a0

        /* Jump for ITLB entry */

        bgez    a3, 1f

        /* We can use up to two TLBTEMP areas, one for src and one for dst. */

        extui   a3, a0, PAGE_SHIFT + DCACHE_ALIAS_ORDER, 1
        add     a1, a3, a1

        /* PPN is in a6 for the first TLBTEMP area and in a7 for the second. */

        mov     a0, a6
        movnez  a0, a7, a3
        j       .Lfast_second_level_miss_wdtlb

        /* ITLB entry. We only use dst in a6. */

1:      witlb   a6, a1
        isync
        j       .Lfast_second_level_miss_skip_wdtlb


#endif  // DCACHE_WAY_SIZE > PAGE_SIZE

        /* Invalid PGD, default exception handling */
.Lfast_second_level_miss_slow:

        rsr     a1, depc
        s32i    a1, a2, PT_AREG2
        mov     a1, a2

        rsr     a2, ps
        bbsi.l  a2, PS_UM_BIT, 1f
        call0   _kernel_exception
1:      call0   _user_exception

ENDPROC(fast_second_level_miss)

/*
 * StoreProhibitedException
 *
 * Update the pte and invalidate the itlb mapping for this pte.
 *
 * Entry condition:
 *
 *   a0:        trashed, original value saved on stack (PT_AREG0)
 *   a1:        a1
 *   a2:        new stack pointer, original in DEPC
 *   a3:        a3
 *   depc:      a2, original value saved on stack (PT_DEPC)
 *   excsave_1: dispatch table
 *
 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
 *           <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
 */

ENTRY(fast_store_prohibited)

        /* Save a1 and a3. */

        s32i    a1, a2, PT_AREG1
        s32i    a3, a2, PT_AREG3

        GET_CURRENT(a1,a2)
        l32i    a0, a1, TASK_MM         # tsk->mm
        beqz    a0, .Lfast_store_no_mm

.Lfast_store_continue:
        rsr     a1, excvaddr            # fault address
        _PGD_OFFSET(a0, a1, a3)
        l32i    a0, a0, 0
        beqz    a0, .Lfast_store_slow

        /*
         * Note that we test _PAGE_WRITABLE_BIT only if PTE is present
         * and is not PAGE_NONE. See pgtable.h for possible PTE layouts.
         */

        _PTE_OFFSET(a0, a1, a3)
        l32i    a3, a0, 0               # read pteval
        movi    a1, _PAGE_CA_INVALID
        ball    a3, a1, .Lfast_store_slow
        bbci.l  a3, _PAGE_WRITABLE_BIT, .Lfast_store_slow

        movi    a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
        or      a3, a3, a1
        rsr     a1, excvaddr
        s32i    a3, a0, 0

        /* We need to flush the cache if we have page coloring. */
#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
        dhwb    a0, 0
#endif
        pdtlb   a0, a1
        wdtlb   a3, a0

        /* Exit critical section. */

        movi    a0, 0
        rsr     a3, excsave1
        s32i    a0, a3, EXC_TABLE_FIXUP

        /* Restore the working registers, and return. */

        l32i    a3, a2, PT_AREG3
        l32i    a1, a2, PT_AREG1
        l32i    a0, a2, PT_AREG0
        l32i    a2, a2, PT_DEPC

        bgeui   a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
        rsr     a2, depc
        rfe

        /* Double exception. Restore FIXUP handler and return. */

1:      xsr     a2, depc
        esync
        rfde

.Lfast_store_no_mm:
        l32i    a0, a1, TASK_ACTIVE_MM  # unlikely case mm == 0
        j       .Lfast_store_continue

        /* If there was a problem, handle fault in C */
.Lfast_store_slow:
        rsr     a1, excvaddr
        pdtlb   a0, a1
        bbci.l  a0, DTLB_HIT_BIT, 1f
        idtlb   a0
1:
        rsr     a3, depc        # still holds a2
        s32i    a3, a2, PT_AREG2
        mov     a1, a2

        rsr     a2, ps
        bbsi.l  a2, PS_UM_BIT, 1f
        call0   _kernel_exception
1:      call0   _user_exception

ENDPROC(fast_store_prohibited)

#endif /* CONFIG_MMU */

        .text
/*
 * System Calls.
 *
 * void system_call (struct pt_regs* regs, int exccause)
 *                            a2                 a3
 */
        .literal_position

ENTRY(system_call)

#if defined(__XTENSA_WINDOWED_ABI__)
        abi_entry_default
#elif defined(__XTENSA_CALL0_ABI__)
        abi_entry(12)

        s32i    a0, sp, 0
        s32i    abi_saved0, sp, 4
        s32i    abi_saved1, sp, 8
        mov     abi_saved0, a2
#else
#error Unsupported Xtensa ABI
#endif

        /* regs->syscall = regs->areg[2] */

        l32i    a7, abi_saved0, PT_AREG2
        s32i    a7, abi_saved0, PT_SYSCALL

        GET_THREAD_INFO(a4, a1)
        l32i    abi_saved1, a4, TI_FLAGS
        movi    a4, _TIF_WORK_MASK
        and     abi_saved1, abi_saved1, a4
        beqz    abi_saved1, 1f

        mov     abi_arg0, abi_saved0
        abi_call        do_syscall_trace_enter
        beqz    abi_rv, .Lsyscall_exit
        l32i    a7, abi_saved0, PT_SYSCALL

1:
        /* syscall = sys_call_table[syscall_nr] */

        movi    a4, sys_call_table
        movi    a5, __NR_syscalls
        movi    abi_rv, -ENOSYS
        bgeu    a7, a5, 1f

        addx4   a4, a7, a4
        l32i    abi_tmp0, a4, 0

        /* Load args: arg0 - arg5 are passed via regs. */

        l32i    abi_arg0, abi_saved0, PT_AREG6
        l32i    abi_arg1, abi_saved0, PT_AREG3
        l32i    abi_arg2, abi_saved0, PT_AREG4
        l32i    abi_arg3, abi_saved0, PT_AREG5
        l32i    abi_arg4, abi_saved0, PT_AREG8
        l32i    abi_arg5, abi_saved0, PT_AREG9

        abi_callx       abi_tmp0

1:      /* regs->areg[2] = return_value */

        s32i    abi_rv, abi_saved0, PT_AREG2
        bnez    abi_saved1, 1f
.Lsyscall_exit:
#if defined(__XTENSA_WINDOWED_ABI__)
        abi_ret_default
#elif defined(__XTENSA_CALL0_ABI__)
        l32i    a0, sp, 0
        l32i    abi_saved0, sp, 4
        l32i    abi_saved1, sp, 8
        abi_ret(12)
#else
#error Unsupported Xtensa ABI
#endif

1:
        mov     abi_arg0, abi_saved0
        abi_call        do_syscall_trace_leave
        j       .Lsyscall_exit

ENDPROC(system_call)

/*
 * Spill live registers on the kernel stack macro.
 *
 * Entry condition: ps.woe is set, ps.excm is cleared
 * Exit condition: windowstart has single bit set
 * May clobber: a12, a13
 */
        .macro  spill_registers_kernel

#if XCHAL_NUM_AREGS > 16
        call12  1f
        _j      2f
        retw
        .align  4
1:
        _entry  a1, 48
        addi    a12, a0, 3
#if XCHAL_NUM_AREGS > 32
        .rept   (XCHAL_NUM_AREGS - 32) / 12
        _entry  a1, 48
        mov     a12, a0
        .endr
#endif
        _entry  a1, 16
#if XCHAL_NUM_AREGS % 12 == 0
        mov     a8, a8
#elif XCHAL_NUM_AREGS % 12 == 4
        mov     a12, a12
#elif XCHAL_NUM_AREGS % 12 == 8
        mov     a4, a4
#endif
        retw
2:
#else
        mov     a12, a12
#endif
        .endm

/*
 * Task switch.
 *
 * struct task*  _switch_to (struct task* prev, struct task* next)
 *         a2                              a2                 a3
 */

ENTRY(_switch_to)

#if defined(__XTENSA_WINDOWED_ABI__)
        abi_entry(XTENSA_SPILL_STACK_RESERVE)
#elif defined(__XTENSA_CALL0_ABI__)
        abi_entry(16)

        s32i    a12, sp, 0
        s32i    a13, sp, 4
        s32i    a14, sp, 8
        s32i    a15, sp, 12
#else
#error Unsupported Xtensa ABI
#endif
        mov     a11, a3                 # and 'next' (a3)

        l32i    a4, a2, TASK_THREAD_INFO
        l32i    a5, a3, TASK_THREAD_INFO

        save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER

#if THREAD_RA > 1020 || THREAD_SP > 1020
        addi    a10, a2, TASK_THREAD
        s32i    a0, a10, THREAD_RA - TASK_THREAD        # save return address
        s32i    a1, a10, THREAD_SP - TASK_THREAD        # save stack pointer
#else
        s32i    a0, a2, THREAD_RA       # save return address
        s32i    a1, a2, THREAD_SP       # save stack pointer
#endif

#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
        movi    a6, __stack_chk_guard
        l32i    a8, a3, TASK_STACK_CANARY
        s32i    a8, a6, 0
#endif

        /* Disable ints while we manipulate the stack pointer. */

        irq_save a14, a3
        rsync

        /* Switch CPENABLE */

#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
        l32i    a3, a5, THREAD_CPENABLE
#ifdef CONFIG_SMP
        beqz    a3, 1f
        memw                    # pairs with memw (2) in fast_coprocessor
        l32i    a6, a5, THREAD_CP_OWNER_CPU
        l32i    a7, a5, THREAD_CPU
        beq     a6, a7, 1f      # load 0 into CPENABLE if current CPU is not the owner
        movi    a3, 0
1:
#endif
        wsr     a3, cpenable
#endif

#if XCHAL_HAVE_EXCLUSIVE
        l32i    a3, a5, THREAD_ATOMCTL8
        getex   a3
        s32i    a3, a4, THREAD_ATOMCTL8
#endif

        /* Flush register file. */

#if defined(__XTENSA_WINDOWED_ABI__)
        spill_registers_kernel
#endif

        /* Set kernel stack (and leave critical section)
         * Note: It's save to set it here. The stack will not be overwritten
         *       because the kernel stack will only be loaded again after
         *       we return from kernel space.
         */

        rsr     a3, excsave1            # exc_table
        addi    a7, a5, PT_REGS_OFFSET
        s32i    a7, a3, EXC_TABLE_KSTK

        /* restore context of the task 'next' */

        l32i    a0, a11, THREAD_RA      # restore return address
        l32i    a1, a11, THREAD_SP      # restore stack pointer

        load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER

        wsr     a14, ps
        rsync

#if defined(__XTENSA_WINDOWED_ABI__)
        abi_ret(XTENSA_SPILL_STACK_RESERVE)
#elif defined(__XTENSA_CALL0_ABI__)
        l32i    a12, sp, 0
        l32i    a13, sp, 4
        l32i    a14, sp, 8
        l32i    a15, sp, 12
        abi_ret(16)
#else
#error Unsupported Xtensa ABI
#endif

ENDPROC(_switch_to)

ENTRY(ret_from_fork)

        /* void schedule_tail (struct task_struct *prev)
         * Note: prev is still in abi_arg0 (return value from fake call frame)
         */
        abi_call        schedule_tail

        mov             abi_arg0, a1
        abi_call        do_syscall_trace_leave
        j               common_exception_return

ENDPROC(ret_from_fork)

/*
 * Kernel thread creation helper
 * On entry, set up by copy_thread: abi_saved0 = thread_fn,
 * abi_saved1 = thread_fn arg. Left from _switch_to: abi_arg0 = prev
 */
ENTRY(ret_from_kernel_thread)

        abi_call        schedule_tail
        mov             abi_arg0, abi_saved1
        abi_callx       abi_saved0
        j               common_exception_return

ENDPROC(ret_from_kernel_thread)

#ifdef CONFIG_HIBERNATION

        .section        .bss, "aw"
        .align  4
.Lsaved_regs:
#if defined(__XTENSA_WINDOWED_ABI__)
        .fill   2, 4
#elif defined(__XTENSA_CALL0_ABI__)
        .fill   6, 4
#else
#error Unsupported Xtensa ABI
#endif
        .align  XCHAL_NCP_SA_ALIGN
.Lsaved_user_regs:
        .fill   XTREGS_USER_SIZE, 1

        .previous

ENTRY(swsusp_arch_suspend)

        abi_entry_default

        movi            a2, .Lsaved_regs
        movi            a3, .Lsaved_user_regs
        s32i            a0, a2, 0
        s32i            a1, a2, 4
        save_xtregs_user a3 a4 a5 a6 a7 a8 0
#if defined(__XTENSA_WINDOWED_ABI__)
        spill_registers_kernel
#elif defined(__XTENSA_CALL0_ABI__)
        s32i            a12, a2, 8
        s32i            a13, a2, 12
        s32i            a14, a2, 16
        s32i            a15, a2, 20
#else
#error Unsupported Xtensa ABI
#endif
        abi_call        swsusp_save
        mov             a2, abi_rv
        abi_ret_default

ENDPROC(swsusp_arch_suspend)

ENTRY(swsusp_arch_resume)

        abi_entry_default

#if defined(__XTENSA_WINDOWED_ABI__)
        spill_registers_kernel
#endif

        movi            a2, restore_pblist
        l32i            a2, a2, 0

.Lcopy_pbe:
        l32i            a3, a2, PBE_ADDRESS
        l32i            a4, a2, PBE_ORIG_ADDRESS

        __loopi         a3, a9, PAGE_SIZE, 16
        l32i            a5, a3, 0
        l32i            a6, a3, 4
        l32i            a7, a3, 8
        l32i            a8, a3, 12
        addi            a3, a3, 16
        s32i            a5, a4, 0
        s32i            a6, a4, 4
        s32i            a7, a4, 8
        s32i            a8, a4, 12
        addi            a4, a4, 16
        __endl          a3, a9

        l32i            a2, a2, PBE_NEXT
        bnez            a2, .Lcopy_pbe

        movi            a2, .Lsaved_regs
        movi            a3, .Lsaved_user_regs
        l32i            a0, a2, 0
        l32i            a1, a2, 4
        load_xtregs_user a3 a4 a5 a6 a7 a8 0
#if defined(__XTENSA_CALL0_ABI__)
        l32i            a12, a2, 8
        l32i            a13, a2, 12
        l32i            a14, a2, 16
        l32i            a15, a2, 20
#endif
        movi            a2, 0
        abi_ret_default

ENDPROC(swsusp_arch_resume)

#endif