ULI526X_DBUG
ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
ULI526X_DBUG(0, "Link Failed", tmp_cr12);
ULI526X_DBUG(0, "Link link OK", tmp_cr12);
ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
ULI526X_DBUG(0, "uli526x_suspend", 0);
ULI526X_DBUG(0, "uli526x_resume", 0);
ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
ULI526X_DBUG(0, "send_filter_frame()", 0);
ULI526X_DBUG(0, "Link Failed :", phy_mode);
ULI526X_DBUG(0, "init_module() ", debug);
ULI526X_DBUG(0, "uli526x_cleanup_module() ", debug);
ULI526X_DBUG(0, "uli526x_init_one()", 0);
ULI526X_DBUG(0, "uli526x_open", 0);
ULI526X_DBUG(0, "uli526x_init()", 0);
ULI526X_DBUG(0, "uli526x_start_xmit", 0);
ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
ULI526X_DBUG(0, "Enable PROM Mode", 0);
ULI526X_DBUG(0, "Pass all multicast address",
ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev));