TW_PRINTK
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "No valid response during get param")
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "No valid response during init connection");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Command packet memory allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x17, "Generic memory allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x18, "Event info memory allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x19, "Found request id that wasn't pending");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "Found unexpected request id while polling for response");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x36, "Response queue (large) empty failed during reset sequence");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Microcontroller not ready during reset sequence");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Response queue empty failed during reset sequence");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Compatibility check failed during reset sequence");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x22, "AEN drain failed during reset sequence");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset failed during scsi host reset");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2e, "Found unaligned sgl address during execute scsi");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2f, "Found unaligned sgl address during internal post");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x31, "Connection shutdown failed");
TW_PRINTK(host, TW_DRIVER, 0x34, "Failed to enable pci device");
TW_PRINTK(host, TW_DRIVER, 0x23, "Failed to set dma mask");
TW_PRINTK(host, TW_DRIVER, 0x24, "Failed to allocate memory for device extension");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x25, "Failed to initialize device extension");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Failed to get mem region");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x35, "Failed to ioremap");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x27, "scsi add host failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x30, "Error requesting IRQ");
TW_PRINTK(host, TW_DRIVER, 0x29, "Failed to register character device");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x38, "Connection shutdown failed during suspend");
TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x42, "Error requesting IRQ during resume");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Found unaligned address during AEN drain");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Error posting request sense");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "No valid response while draining AEN queue");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "Post failed while reading AEN queue");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x6, "Failed to allocate correctly aligned memory");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "Initconnection failed while checking SRL");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Initconnection (base mode) failed while checking SRL");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x32, "Firmware and driver incompatibility: please upgrade firmware");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x33, "Firmware and driver incompatibility: please upgrade driver");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "PCI Parity Error: clearing");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "PCI Abort: clearing");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Microcontroller Error: clearing");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed");
TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device");
TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask");
TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info");
TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend");
TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed");
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param")