BIT_7
#define QLCNIC_FW_CAPABILITY_2_BEACON BIT_7
arg1 |= (BIT_4 | BIT_6 | BIT_7);
arg1 &= ~BIT_7;
esw_cfg->mac_override = !!(arg1 & BIT_7);
#define QLCNIC_DUMP_MOD_SAVE_ST BIT_7
#define QLCNIC_DUMP_SKIP BIT_7
if (status & BIT_7)
mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
#define CMD_ARGS (BIT_7 | BIT_6 | BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 |
status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 |
mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 :
BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);
status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 |
mb[1] = (bus ? (target | BIT_7) : target) << 8;
mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
pkt->target = (uint8_t) (bus ? (id | BIT_7) : id);
(SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
(SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
#define HOST_INT BIT_7 /* host interrupt bit */
#define OF_DATA_OUT BIT_7 /* Data out from initiator */
#define OF_NO_DATA (BIT_7 | BIT_6)
#define FO1_AE_ON_LOOP_INIT_ERR BIT_7
#define MBX_7 BIT_7
#define PO_DIS_HEADER_MODE BIT_7
#define SCM_RDF_ACC_RECEIVED BIT_7
#define NVME_PRLI_SP_CONF BIT_7
#define FCF_EDIF_DELETE BIT_7
FS_FCP_IS_N2N = BIT_7,
#define QLA_MSIX_FW_MODE(m) (((m) & (BIT_7|BIT_8|BIT_9)) >> 7)
#define SRB_DIF_BUNDL_DMA_VALID BIT_7 /* DIF: DMA list valid */
#define DT_ISP2422 BIT_7
#define ENABLE_EXTENDED_LOGIN BIT_7
#define FC_LL_VL BIT_7 /* very long */
#define FC_TEC_EL BIT_7 /* Electrical inter enclosure */
#define FC_MED_TW BIT_7 /* Twin Ax */
#define FC_SP_12 BIT_7
#define HCCR_HOST_INT BIT_7 /* Host interrupt bit */
#define PDF_FC_TAPE BIT_7
#define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */
#define LCF_COMMON_FEAT BIT_7 /* PLOGI - Set Common Features Field */
if (entry[0] & BIT_7) {
case BIT_7:
if (gid_data->control_byte & BIT_7) {
(BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
(BIT_7 | BIT_6 | BIT_5)) >> 5;
(BIT_7 | BIT_6 | BIT_5 | BIT_4)) >> 4;
BIT_7) != 0;
nv->firmware_options[1] = BIT_7 | BIT_5;
nv->special_options[1] = BIT_7;
nv->firmware_options[1] = BIT_7 | BIT_5;
if (nv->host_p[1] & BIT_7) {
if (nv->host_p[0] & BIT_7)
if (mb[10] & BIT_7)
if ((nv->enhanced_features & BIT_7) == 0)
if (iop[0] & BIT_7)
if (pd24->prli_svc_param_word_3[0] & BIT_7)
if (lg->io_parameter[0] & cpu_to_le32(BIT_7))
mb[10] |= BIT_7; /* Confirmed Completion
else if (subcode & (BIT_6 | BIT_7)) {
mcp->mb[10] = BIT_7 | 0x40;
if (pd->prli_svc_param_word_3[0] & BIT_7) {
#define EXE_FW_FORCE_SEMAPHORE BIT_7
if (wd3_lo & BIT_7)
uint16_t options = (requester_id << 15) | BIT_7;
poll_data &= BIT_7;
if ((flash_data & BIT_7) == poll_data) {
last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
last_image = bcode[0x15] & BIT_7;
last_image = bcode[0x15] & BIT_7;
last_image = bcode[0x15] & BIT_7;
if (wd3_lo & BIT_7)
if (wd3_lo & BIT_7)
#define CTIO7_FLAGS_STATUS_MODE_2 BIT_7
TRC_SRR_XRDY = BIT_7,
#define OF_DATA_OUT BIT_7 /* Data out from initiator */
#define OF_NO_DATA (BIT_7 | BIT_6)
#define DRIVER_FLAG_SKIP_ENTRY BIT_7
if (chap_entry->flags & BIT_7)
chap_table->flags |= BIT_7; /* local */
if (!(chap_table->flags & BIT_7)) {
if (chap_table->flags & BIT_7)
iscsi_opts |= BIT_7;
SET_BITVAL(sess->chap_auth_en, options, BIT_7);
if (val & BIT_7)
if (val & BIT_7)
if (buf[2] & BIT_7)
if (buf[11] & BIT_7)
if (chap_table->flags & BIT_7) /* local */
if (BIT_7 & le16_to_cpu(fw_ddb_entry->iscsi_options)) {
if (chap_table->flags & BIT_7) /* local */