BIT_1 - Linux

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

1315

#define QLCNIC_SWITCH_ENABLE BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

913

#define QLCNIC_FW_CAPABILITY_TSO BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

929

#define QLCNIC_83XX_FW_CAPAB_ENCAP_TX_OFFLOAD BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

2022

lro_bit_mask = (mode ? (BIT_0 | BIT_1 | BIT_2 | BIT_3) : 0);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

3540

cmd.req.arg[1] = BIT_1 | (adapter->tx_ring->ctx_id << 16);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

3571

#define QLCNIC_83XX_ADD_PORT1 BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h

531

#define QLC_REGISTER_DCB_AEN BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c

1022

#define QLC_83XX_ENCAP_TYPE_VXLAN BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c

1352

arg2 |= (BIT_0 | BIT_1);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c

1364

arg2 &= ~(BIT_1 | BIT_2 | BIT_3);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c

1365

if (!(esw_cfg->offload_flags & BIT_1))

drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h

493

#define TA_CTL_ENABLE BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c

1033

if (!(offload_flags & BIT_1))

drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c

815

#define QLCNIC_ENABLE_IPV6_LRO (BIT_1 | BIT_9)

drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h

140

#define QLCNIC_GET_OWNER(val) ((val) & (BIT_0 | BIT_1))

drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c

364

#define QLCNIC_ENCAP_OUTER_L3_IP6 BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c

1495

esw_cfg.offload_flags |= (BIT_1 | BIT_2);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c

24

#define QLCNIC_DUMP_RWCRB BIT_1

drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c

753

if (dma_sts & BIT_1)

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c

381

if (status & BIT_1)

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c

390

cmd.req.arg[1] = ((func & 0xf) << 2) | BIT_6 | BIT_1;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c

703

cmd.req.arg[2] |= BIT_1 | BIT_3 | BIT_8;

drivers/scsi/qla1280.c

1118

mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;

drivers/scsi/qla1280.c

1684

err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);

drivers/scsi/qla1280.c

1698

#define CMD_ARGS (BIT_7 | BIT_6 | BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)

drivers/scsi/qla1280.c

1702

#define CMD_ARGS (BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)

drivers/scsi/qla1280.c

1826

err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);

drivers/scsi/qla1280.c

1836

err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);

drivers/scsi/qla1280.c

1903

BIT_3 | BIT_2 | BIT_1 | BIT_0,

drivers/scsi/qla1280.c

1917

BIT_3 | BIT_2 | BIT_1 | BIT_0,

drivers/scsi/qla1280.c

2137

status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);

drivers/scsi/qla1280.c

2210

BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla1280.c

2222

status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);

drivers/scsi/qla1280.c

2228

status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);

drivers/scsi/qla1280.c

2236

status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);

drivers/scsi/qla1280.c

2245

BIT_1 | BIT_0, &mb[0]);

drivers/scsi/qla1280.c

2251

status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);

drivers/scsi/qla1280.c

2265

status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);

drivers/scsi/qla1280.c

2269

status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);

drivers/scsi/qla1280.c

2273

mb[1] = BIT_1; /* Data DMA Channel Burst Enable */

drivers/scsi/qla1280.c

2274

mb[2] = BIT_1; /* Command DMA Channel Burst Enable */

drivers/scsi/qla1280.c

2275

status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);

drivers/scsi/qla1280.c

2279

status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);

drivers/scsi/qla1280.c

2285

status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);

drivers/scsi/qla1280.c

2556

status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);

drivers/scsi/qla1280.c

2610

status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);

drivers/scsi/qla1280.c

3699

else if (pkt->entry_status & BIT_1)

drivers/scsi/qla1280.c

3719

} else if (pkt->entry_status & BIT_1) { /* FULL flag */

drivers/scsi/qla1280.c

3896

qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,

drivers/scsi/qla1280.h

134

#define ISP_EN_INT BIT_1 /* ISP enable interrupts. */

drivers/scsi/qla1280.h

141

#define PCI_INT BIT_1 /* PCI interrupt */

drivers/scsi/qla1280.h

146

#define NV_SELECT BIT_1

drivers/scsi/qla1280.h

158

#define CDMA_CONF_BENAB BIT_1 /* Bus burst enable */

drivers/scsi/qla1280.h

175

#define DDMA_CONF_BENAB BIT_1 /* Bus burst enable */

drivers/scsi/qla1280.h

567

#define RF_FULL BIT_1 /* Full */

drivers/scsi/qla1280.h

965

#define OF_ENABLE_TAG BIT_1 /* Tagged queue action enable */

drivers/scsi/qla2xxx/qla_attr.c

1385

options |= BIT_3|BIT_2|BIT_1;

drivers/scsi/qla2xxx/qla_attr.c

1407

options |= BIT_1;

drivers/scsi/qla2xxx/qla_dbg.c

1007

(rd_reg_word(&reg->mctr) & (BIT_1 | BIT_0)) != 0))) {

drivers/scsi/qla2xxx/qla_def.h

1099

#define MBX_DMA_OUT BIT_1

drivers/scsi/qla2xxx/qla_def.h

1112

#define MBX_DMA_OUT BIT_1

drivers/scsi/qla2xxx/qla_def.h

1240

#define FO1_AE_ALL_LIP_RESET BIT_1

drivers/scsi/qla2xxx/qla_def.h

1254

#define FO2_REV_LOOPBACK BIT_1

drivers/scsi/qla2xxx/qla_def.h

1257

#define FO3_AE_RND_ERROR BIT_1

drivers/scsi/qla2xxx/qla_def.h

1443

#define MBX_1 BIT_1

drivers/scsi/qla2xxx/qla_def.h

1551

#define QLA_ZIO_MODE_6 (BIT_2 | BIT_1)

drivers/scsi/qla2xxx/qla_def.h

2036

#define CF_HEAD_TAG BIT_1

drivers/scsi/qla2xxx/qla_def.h

2197

#define RF_BUSY BIT_1 /* Busy */

drivers/scsi/qla2xxx/qla_def.h

2216

#define SS_CHECK_CONDITION BIT_1

drivers/scsi/qla2xxx/qla_def.h

230

#define IDC_PEG_HALT_STATUS_CHANGE BIT_1

drivers/scsi/qla2xxx/qla_def.h

2439

#define NOTIFY24XX_FLAGS_GLOBAL_TPRLO BIT_1

drivers/scsi/qla2xxx/qla_def.h

250

#define QLA83XX_IDC_GRACEFUL_RESET BIT_1

drivers/scsi/qla2xxx/qla_def.h

2785

#define FCF_LOGIN_NEEDED BIT_1

drivers/scsi/qla2xxx/qla_def.h

3291

#define FC4_FF_INITIATOR BIT_1

drivers/scsi/qla2xxx/qla_def.h

3316

SF_QUEUED = BIT_1,

drivers/scsi/qla2xxx/qla_def.h

3321

FS_FC4TYPE_NVME = BIT_1,

drivers/scsi/qla2xxx/qla_def.h

3438

#define VP_OPTS_VP_DISABLE BIT_1

drivers/scsi/qla2xxx/qla_def.h

416

#define SRB_GOT_BUF BIT_1

drivers/scsi/qla2xxx/qla_def.h

4293

#define DT_ISP2200 BIT_1

drivers/scsi/qla2xxx/qla_def.h

4576

#define FW_ATTR_H_NVME_FBURST BIT_1

drivers/scsi/qla2xxx/qla_def.h

5020

#define DFLG_NO_CABLE BIT_1

drivers/scsi/qla2xxx/qla_def.h

5154

#define DPORT_DIAG_CHIP_RESET_IN_PROGRESS BIT_1

drivers/scsi/qla2xxx/qla_def.h

5171

#define QLA28XX_AUX_IMG_VPD_NVRAM BIT_1

drivers/scsi/qla2xxx/qla_def.h

534

#define SRB_LOGIN_COND_PLOGI BIT_1

drivers/scsi/qla2xxx/qla_def.h

5411

#define FC_LL_LC BIT_1 /* LongWave laser */

drivers/scsi/qla2xxx/qla_def.h

5439

#define FC_SPEED_2 BIT_1

drivers/scsi/qla2xxx/qla_def.h

584

#define SRB_FXDISC_RESP_DMA_VALID BIT_1

drivers/scsi/qla2xxx/qla_def.h

824

#define CSR_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable */

drivers/scsi/qla2xxx/qla_def.h

842

#define NVR_SELECT BIT_1

drivers/scsi/qla2xxx/qla_edif.h

20

#define EDIF_SA_CTL_FLG_DEL BIT_1

drivers/scsi/qla2xxx/qla_edif.h

80

#define SA_FLAG_TX BIT_1 // 1=tx, 0=rx

drivers/scsi/qla2xxx/qla_fw.h

1001

#define AOF_NO_RRQ BIT_1 /* Do not send RRQ. */

drivers/scsi/qla2xxx/qla_fw.h

1195

#define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */

drivers/scsi/qla2xxx/qla_fw.h

1265

#define GPDX_DATA_INOUT (BIT_1|BIT_0)

drivers/scsi/qla2xxx/qla_fw.h

1273

#define GPEX_ENABLE (BIT_1|BIT_0)

drivers/scsi/qla2xxx/qla_fw.h

1396

#define MDBS_ID_ACQUIRED BIT_1

drivers/scsi/qla2xxx/qla_fw.h

1459

#define CS_VF_SET_QOS_OF_VPORTS BIT_1

drivers/scsi/qla2xxx/qla_fw.h

1750

#define FSTATE_NSL_LINK_DOWN BIT_1

drivers/scsi/qla2xxx/qla_fw.h

1766

#define VCO_FORCE_UPDATE BIT_1

drivers/scsi/qla2xxx/qla_fw.h

30

#define PDO_FORCE_ADISC BIT_1

drivers/scsi/qla2xxx/qla_fw.h

45

#define PDF_HARD_ADDR BIT_1

drivers/scsi/qla2xxx/qla_fw.h

457

#define BD_READ_DATA BIT_1

drivers/scsi/qla2xxx/qla_fw.h

498

#define CF_READ_DATA BIT_1

drivers/scsi/qla2xxx/qla_fw.h

540

#define TMF_READ_DATA BIT_1

drivers/scsi/qla2xxx/qla_fw.h

974

#define TCF_TARGET_RESET BIT_1

drivers/scsi/qla2xxx/qla_gbl.h

1001

#define QLA2XX_SHT_LNK_DWN BIT_1

drivers/scsi/qla2xxx/qla_gs.c

1372

0xfa, mb, BIT_1);

drivers/scsi/qla2xxx/qla_init.c

4522

swing = ha->fw_seriallink_options[2] & (BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

4526

(BIT_3 | BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

4536

((rx_sens & (BIT_1 | BIT_0)) << 2) |

drivers/scsi/qla2xxx/qla_init.c

4537

(tx_sens & (BIT_1 | BIT_0));

drivers/scsi/qla2xxx/qla_init.c

4542

emphasis = ha->fw_seriallink_options[3] & (BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

4544

(BIT_3 | BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

4554

((rx_sens & (BIT_1 | BIT_0)) << 2) |

drivers/scsi/qla2xxx/qla_init.c

4555

(tx_sens & (BIT_1 | BIT_0));

drivers/scsi/qla2xxx/qla_init.c

4866

mid_init_cb->options = cpu_to_le16(BIT_1);

drivers/scsi/qla2xxx/qla_init.c

5297

nv->firmware_options[0] = BIT_2 | BIT_1;

drivers/scsi/qla2xxx/qla_init.c

5304

nv->firmware_options[0] = BIT_2 | BIT_1;

drivers/scsi/qla2xxx/qla_init.c

5310

nv->firmware_options[0] = BIT_3 | BIT_1;

drivers/scsi/qla2xxx/qla_init.c

5346

nv->firmware_options[0] |= (BIT_6 | BIT_1);

drivers/scsi/qla2xxx/qla_init.c

5429

ha->flags.enable_lip_reset = ((nv->host_p[1] & BIT_1) ? 1 : 0);

drivers/scsi/qla2xxx/qla_init.c

5508

~(BIT_3 | BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

5518

(BIT_3 | BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

5523

~(BIT_3 | BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

6375

0xfc, mb, BIT_1|BIT_0);

drivers/scsi/qla2xxx/qla_init.c

6876

if (mb[1] & BIT_1) {

drivers/scsi/qla2xxx/qla_init.c

6883

if (mb[10] & BIT_1)

drivers/scsi/qla2xxx/qla_init.c

7979

cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);

drivers/scsi/qla2xxx/qla_init.c

8127

(BIT_3 | BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

8132

~(BIT_3 | BIT_2 | BIT_1 | BIT_0));

drivers/scsi/qla2xxx/qla_init.c

9186

BIT_1);

drivers/scsi/qla2xxx/qla_init.c

9388

cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);

drivers/scsi/qla2xxx/qla_init.c

9555

(BIT_3 | BIT_2 | BIT_1 | BIT_0);

drivers/scsi/qla2xxx/qla_init.c

9560

~(BIT_3 | BIT_2 | BIT_1 | BIT_0));

drivers/scsi/qla2xxx/qla_inline.h

387

RESOURCE_EXCH = BIT_1, /* exchange */

drivers/scsi/qla2xxx/qla_iocb.c

2455

opts |= lio->u.logio.flags & SRB_LOGIN_SKIP_PRLI ? BIT_1 : 0;

drivers/scsi/qla2xxx/qla_isr.c

2150

else if (le16_to_cpu(mbx->mb1) & BIT_1)

drivers/scsi/qla2xxx/qla_isr.c

3398

if (unlikely((state_flags & BIT_1) && (sp->type == SRB_BIDI_CMD))) {

drivers/scsi/qla2xxx/qla_mbx.c

1946

mcp->mb[1] |= BIT_1;

drivers/scsi/qla2xxx/qla_mbx.c

2449

mcp->mb[1] = BIT_1;

drivers/scsi/qla2xxx/qla_mbx.c

2582

if (opt & BIT_1)

drivers/scsi/qla2xxx/qla_mbx.c

2642

mb[1] |= BIT_1;

drivers/scsi/qla2xxx/qla_mbx.c

2651

mb[10] |= BIT_1; /* Class 3. */

drivers/scsi/qla2xxx/qla_mbx.c

4388

rval = BIT_1;

drivers/scsi/qla2xxx/qla_mbx.c

4391

rval = BIT_1;

drivers/scsi/qla2xxx/qla_mbx.c

5801

mcp->mb[2] = BIT_1;

drivers/scsi/qla2xxx/qla_mbx.c

6936

addr, offset, SFP_BLOCK_SIZE, BIT_1);

drivers/scsi/qla2xxx/qla_mbx.c

7111

if (options & BIT_1) {

drivers/scsi/qla2xxx/qla_mbx.c

797

ha->max_supported_speed = mcp->mb[2] & (BIT_0|BIT_1);

drivers/scsi/qla2xxx/qla_mbx.c

804

(BIT_0 | BIT_1 | BIT_2);

drivers/scsi/qla2xxx/qla_mid.c

884

options |= BIT_1;

drivers/scsi/qla2xxx/qla_nvme.h

65

#define CF_READ_DATA BIT_1

drivers/scsi/qla2xxx/qla_nx2.c

2879

if ((cmd_sts_and_cntrl & BIT_1) == 0)

drivers/scsi/qla2xxx/qla_os.c

6174

else if (sfp[0] & BIT_1)

drivers/scsi/qla2xxx/qla_os.c

6175

sfp_flags |= BIT_1; /* long wave 1310nm */

drivers/scsi/qla2xxx/qla_os.c

6177

sfp_flags |= BIT_1|BIT_0; /* long wave 1550nm */

drivers/scsi/qla2xxx/qla_target.c

7833

fc4_feature = BIT_1;

drivers/scsi/qla2xxx/qla_target.c

7835

fc4_feature = BIT_0 | BIT_1;

drivers/scsi/qla2xxx/qla_target.h

1001

#define QLA24XX_MGMT_ABORT_IO_ATTR_VALID BIT_1

drivers/scsi/qla2xxx/qla_target.h

226

#define ATIO_EXEC_READ BIT_1

drivers/scsi/qla2xxx/qla_target.h

423

#define EF_NEW_SA BIT_1

drivers/scsi/qla2xxx/qla_target.h

484

#define CTIO7_FLAGS_DATA_IN BIT_1 /* data to initiator */

drivers/scsi/qla2xxx/qla_target.h

853

TRC_DO_WORK = BIT_1,

drivers/scsi/qla2xxx/qla_tmpl.h

61

#define CAPTURE_FLAG_PHYS_VIRT BIT_1

drivers/scsi/qla4xxx/ql4_fw.h

61

#define HSRX_RISC_IOCB_INT BIT_1 /* RISC to Host IOCB interrupt */

drivers/scsi/qla4xxx/ql4_nx.c

1994

if ((cmd_sts_and_cntrl & BIT_1) == 0)

drivers/scsi/qla4xxx/ql4_os.c

3550

sess->erl |= BIT_1;

drivers/scsi/qla4xxx/ql4_os.c

3563

conn->tcp_timer_scale |= BIT_1;

drivers/scsi/qla4xxx/ql4_os.c

3680

SET_BITVAL(sess->erl & BIT_1, options, BIT_1);

drivers/scsi/qla4xxx/ql4_os.c

3689

SET_BITVAL(conn->tcp_timer_scale & BIT_1, options, BIT_2);

drivers/scsi/qla4xxx/ql4_os.c

3690

SET_BITVAL(conn->tcp_timer_scale & BIT_0, options, BIT_1);

drivers/scsi/qla4xxx/ql4_os.c

3786

sess->erl |= BIT_1;

drivers/scsi/qla4xxx/ql4_os.c

3799

conn->tcp_timer_scale |= BIT_1;

drivers/scsi/qla4xxx/ql4_os.c

8913

if (PCI_FUNC(ha->pdev->devfn) & BIT_1)