drivers/scsi/sense_codes.h
10
SENSE_CODE(0x0003, "Setmark detected")
drivers/scsi/sense_codes.h
101
SENSE_CODE(0x0B00, "Warning")
drivers/scsi/sense_codes.h
102
SENSE_CODE(0x0B01, "Warning - specified temperature exceeded")
drivers/scsi/sense_codes.h
103
SENSE_CODE(0x0B02, "Warning - enclosure degraded")
drivers/scsi/sense_codes.h
104
SENSE_CODE(0x0B03, "Warning - background self-test failed")
drivers/scsi/sense_codes.h
105
SENSE_CODE(0x0B04, "Warning - background pre-scan detected medium error")
drivers/scsi/sense_codes.h
106
SENSE_CODE(0x0B05, "Warning - background medium scan detected medium error")
drivers/scsi/sense_codes.h
107
SENSE_CODE(0x0B06, "Warning - non-volatile cache now volatile")
drivers/scsi/sense_codes.h
108
SENSE_CODE(0x0B07, "Warning - degraded power to non-volatile cache")
drivers/scsi/sense_codes.h
109
SENSE_CODE(0x0B08, "Warning - power loss expected")
drivers/scsi/sense_codes.h
11
SENSE_CODE(0x0004, "Beginning-of-partition/medium detected")
drivers/scsi/sense_codes.h
110
SENSE_CODE(0x0B09, "Warning - device statistics notification active")
drivers/scsi/sense_codes.h
111
SENSE_CODE(0x0B0A, "Warning - high critical temperature limit exceeded")
drivers/scsi/sense_codes.h
112
SENSE_CODE(0x0B0B, "Warning - low critical temperature limit exceeded")
drivers/scsi/sense_codes.h
113
SENSE_CODE(0x0B0C, "Warning - high operating temperature limit exceeded")
drivers/scsi/sense_codes.h
114
SENSE_CODE(0x0B0D, "Warning - low operating temperature limit exceeded")
drivers/scsi/sense_codes.h
115
SENSE_CODE(0x0B0E, "Warning - high critical humidity limit exceeded")
drivers/scsi/sense_codes.h
116
SENSE_CODE(0x0B0F, "Warning - low critical humidity limit exceeded")
drivers/scsi/sense_codes.h
117
SENSE_CODE(0x0B10, "Warning - high operating humidity limit exceeded")
drivers/scsi/sense_codes.h
118
SENSE_CODE(0x0B11, "Warning - low operating humidity limit exceeded")
drivers/scsi/sense_codes.h
119
SENSE_CODE(0x0B12, "Warning - microcode security at risk")
drivers/scsi/sense_codes.h
12
SENSE_CODE(0x0005, "End-of-data detected")
drivers/scsi/sense_codes.h
120
SENSE_CODE(0x0B13, "Warning - microcode digital signature validation failure")
drivers/scsi/sense_codes.h
121
SENSE_CODE(0x0B14, "Warning - physical element status change")
drivers/scsi/sense_codes.h
123
SENSE_CODE(0x0C00, "Write error")
drivers/scsi/sense_codes.h
124
SENSE_CODE(0x0C01, "Write error - recovered with auto reallocation")
drivers/scsi/sense_codes.h
125
SENSE_CODE(0x0C02, "Write error - auto reallocation failed")
drivers/scsi/sense_codes.h
126
SENSE_CODE(0x0C03, "Write error - recommend reassignment")
drivers/scsi/sense_codes.h
127
SENSE_CODE(0x0C04, "Compression check miscompare error")
drivers/scsi/sense_codes.h
128
SENSE_CODE(0x0C05, "Data expansion occurred during compression")
drivers/scsi/sense_codes.h
129
SENSE_CODE(0x0C06, "Block not compressible")
drivers/scsi/sense_codes.h
13
SENSE_CODE(0x0006, "I/O process terminated")
drivers/scsi/sense_codes.h
130
SENSE_CODE(0x0C07, "Write error - recovery needed")
drivers/scsi/sense_codes.h
131
SENSE_CODE(0x0C08, "Write error - recovery failed")
drivers/scsi/sense_codes.h
132
SENSE_CODE(0x0C09, "Write error - loss of streaming")
drivers/scsi/sense_codes.h
133
SENSE_CODE(0x0C0A, "Write error - padding blocks added")
drivers/scsi/sense_codes.h
134
SENSE_CODE(0x0C0B, "Auxiliary memory write error")
drivers/scsi/sense_codes.h
135
SENSE_CODE(0x0C0C, "Write error - unexpected unsolicited data")
drivers/scsi/sense_codes.h
136
SENSE_CODE(0x0C0D, "Write error - not enough unsolicited data")
drivers/scsi/sense_codes.h
137
SENSE_CODE(0x0C0E, "Multiple write errors")
drivers/scsi/sense_codes.h
138
SENSE_CODE(0x0C0F, "Defects in error window")
drivers/scsi/sense_codes.h
139
SENSE_CODE(0x0C10, "Incomplete multiple atomic write operations")
drivers/scsi/sense_codes.h
14
SENSE_CODE(0x0007, "Programmable early warning detected")
drivers/scsi/sense_codes.h
140
SENSE_CODE(0x0C11, "Write error - recovery scan needed")
drivers/scsi/sense_codes.h
141
SENSE_CODE(0x0C12, "Write error - insufficient zone resources")
drivers/scsi/sense_codes.h
143
SENSE_CODE(0x0D00, "Error detected by third party temporary initiator")
drivers/scsi/sense_codes.h
144
SENSE_CODE(0x0D01, "Third party device failure")
drivers/scsi/sense_codes.h
145
SENSE_CODE(0x0D02, "Copy target device not reachable")
drivers/scsi/sense_codes.h
146
SENSE_CODE(0x0D03, "Incorrect copy target device type")
drivers/scsi/sense_codes.h
147
SENSE_CODE(0x0D04, "Copy target device data underrun")
drivers/scsi/sense_codes.h
148
SENSE_CODE(0x0D05, "Copy target device data overrun")
drivers/scsi/sense_codes.h
15
SENSE_CODE(0x0011, "Audio play operation in progress")
drivers/scsi/sense_codes.h
150
SENSE_CODE(0x0E00, "Invalid information unit")
drivers/scsi/sense_codes.h
151
SENSE_CODE(0x0E01, "Information unit too short")
drivers/scsi/sense_codes.h
152
SENSE_CODE(0x0E02, "Information unit too long")
drivers/scsi/sense_codes.h
153
SENSE_CODE(0x0E03, "Invalid field in command information unit")
drivers/scsi/sense_codes.h
155
SENSE_CODE(0x1000, "Id CRC or ECC error")
drivers/scsi/sense_codes.h
156
SENSE_CODE(0x1001, "Logical block guard check failed")
drivers/scsi/sense_codes.h
157
SENSE_CODE(0x1002, "Logical block application tag check failed")
drivers/scsi/sense_codes.h
158
SENSE_CODE(0x1003, "Logical block reference tag check failed")
drivers/scsi/sense_codes.h
159
SENSE_CODE(0x1004, "Logical block protection error on recover buffered data")
drivers/scsi/sense_codes.h
16
SENSE_CODE(0x0012, "Audio play operation paused")
drivers/scsi/sense_codes.h
160
SENSE_CODE(0x1005, "Logical block protection method error")
drivers/scsi/sense_codes.h
162
SENSE_CODE(0x1100, "Unrecovered read error")
drivers/scsi/sense_codes.h
163
SENSE_CODE(0x1101, "Read retries exhausted")
drivers/scsi/sense_codes.h
164
SENSE_CODE(0x1102, "Error too long to correct")
drivers/scsi/sense_codes.h
165
SENSE_CODE(0x1103, "Multiple read errors")
drivers/scsi/sense_codes.h
166
SENSE_CODE(0x1104, "Unrecovered read error - auto reallocate failed")
drivers/scsi/sense_codes.h
167
SENSE_CODE(0x1105, "L-EC uncorrectable error")
drivers/scsi/sense_codes.h
168
SENSE_CODE(0x1106, "CIRC unrecovered error")
drivers/scsi/sense_codes.h
169
SENSE_CODE(0x1107, "Data re-synchronization error")
drivers/scsi/sense_codes.h
17
SENSE_CODE(0x0013, "Audio play operation successfully completed")
drivers/scsi/sense_codes.h
170
SENSE_CODE(0x1108, "Incomplete block read")
drivers/scsi/sense_codes.h
171
SENSE_CODE(0x1109, "No gap found")
drivers/scsi/sense_codes.h
172
SENSE_CODE(0x110A, "Miscorrected error")
drivers/scsi/sense_codes.h
173
SENSE_CODE(0x110B, "Unrecovered read error - recommend reassignment")
drivers/scsi/sense_codes.h
174
SENSE_CODE(0x110C, "Unrecovered read error - recommend rewrite the data")
drivers/scsi/sense_codes.h
175
SENSE_CODE(0x110D, "De-compression CRC error")
drivers/scsi/sense_codes.h
176
SENSE_CODE(0x110E, "Cannot decompress using declared algorithm")
drivers/scsi/sense_codes.h
177
SENSE_CODE(0x110F, "Error reading UPC/EAN number")
drivers/scsi/sense_codes.h
178
SENSE_CODE(0x1110, "Error reading ISRC number")
drivers/scsi/sense_codes.h
179
SENSE_CODE(0x1111, "Read error - loss of streaming")
drivers/scsi/sense_codes.h
18
SENSE_CODE(0x0014, "Audio play operation stopped due to error")
drivers/scsi/sense_codes.h
180
SENSE_CODE(0x1112, "Auxiliary memory read error")
drivers/scsi/sense_codes.h
181
SENSE_CODE(0x1113, "Read error - failed retransmission request")
drivers/scsi/sense_codes.h
182
SENSE_CODE(0x1114, "Read error - lba marked bad by application client")
drivers/scsi/sense_codes.h
183
SENSE_CODE(0x1115, "Write after sanitize required")
drivers/scsi/sense_codes.h
185
SENSE_CODE(0x1200, "Address mark not found for id field")
drivers/scsi/sense_codes.h
187
SENSE_CODE(0x1300, "Address mark not found for data field")
drivers/scsi/sense_codes.h
189
SENSE_CODE(0x1400, "Recorded entity not found")
drivers/scsi/sense_codes.h
19
SENSE_CODE(0x0015, "No current audio status to return")
drivers/scsi/sense_codes.h
190
SENSE_CODE(0x1401, "Record not found")
drivers/scsi/sense_codes.h
191
SENSE_CODE(0x1402, "Filemark or setmark not found")
drivers/scsi/sense_codes.h
192
SENSE_CODE(0x1403, "End-of-data not found")
drivers/scsi/sense_codes.h
193
SENSE_CODE(0x1404, "Block sequence error")
drivers/scsi/sense_codes.h
194
SENSE_CODE(0x1405, "Record not found - recommend reassignment")
drivers/scsi/sense_codes.h
195
SENSE_CODE(0x1406, "Record not found - data auto-reallocated")
drivers/scsi/sense_codes.h
196
SENSE_CODE(0x1407, "Locate operation failure")
drivers/scsi/sense_codes.h
198
SENSE_CODE(0x1500, "Random positioning error")
drivers/scsi/sense_codes.h
199
SENSE_CODE(0x1501, "Mechanical positioning error")
drivers/scsi/sense_codes.h
20
SENSE_CODE(0x0016, "Operation in progress")
drivers/scsi/sense_codes.h
200
SENSE_CODE(0x1502, "Positioning error detected by read of medium")
drivers/scsi/sense_codes.h
202
SENSE_CODE(0x1600, "Data synchronization mark error")
drivers/scsi/sense_codes.h
203
SENSE_CODE(0x1601, "Data sync error - data rewritten")
drivers/scsi/sense_codes.h
204
SENSE_CODE(0x1602, "Data sync error - recommend rewrite")
drivers/scsi/sense_codes.h
205
SENSE_CODE(0x1603, "Data sync error - data auto-reallocated")
drivers/scsi/sense_codes.h
206
SENSE_CODE(0x1604, "Data sync error - recommend reassignment")
drivers/scsi/sense_codes.h
208
SENSE_CODE(0x1700, "Recovered data with no error correction applied")
drivers/scsi/sense_codes.h
209
SENSE_CODE(0x1701, "Recovered data with retries")
drivers/scsi/sense_codes.h
21
SENSE_CODE(0x0017, "Cleaning requested")
drivers/scsi/sense_codes.h
210
SENSE_CODE(0x1702, "Recovered data with positive head offset")
drivers/scsi/sense_codes.h
211
SENSE_CODE(0x1703, "Recovered data with negative head offset")
drivers/scsi/sense_codes.h
212
SENSE_CODE(0x1704, "Recovered data with retries and/or circ applied")
drivers/scsi/sense_codes.h
213
SENSE_CODE(0x1705, "Recovered data using previous sector id")
drivers/scsi/sense_codes.h
214
SENSE_CODE(0x1706, "Recovered data without ECC - data auto-reallocated")
drivers/scsi/sense_codes.h
215
SENSE_CODE(0x1707, "Recovered data without ECC - recommend reassignment")
drivers/scsi/sense_codes.h
216
SENSE_CODE(0x1708, "Recovered data without ECC - recommend rewrite")
drivers/scsi/sense_codes.h
217
SENSE_CODE(0x1709, "Recovered data without ECC - data rewritten")
drivers/scsi/sense_codes.h
219
SENSE_CODE(0x1800, "Recovered data with error correction applied")
drivers/scsi/sense_codes.h
22
SENSE_CODE(0x0018, "Erase operation in progress")
drivers/scsi/sense_codes.h
220
SENSE_CODE(0x1801, "Recovered data with error corr. & retries applied")
drivers/scsi/sense_codes.h
221
SENSE_CODE(0x1802, "Recovered data - data auto-reallocated")
drivers/scsi/sense_codes.h
222
SENSE_CODE(0x1803, "Recovered data with CIRC")
drivers/scsi/sense_codes.h
223
SENSE_CODE(0x1804, "Recovered data with L-EC")
drivers/scsi/sense_codes.h
224
SENSE_CODE(0x1805, "Recovered data - recommend reassignment")
drivers/scsi/sense_codes.h
225
SENSE_CODE(0x1806, "Recovered data - recommend rewrite")
drivers/scsi/sense_codes.h
226
SENSE_CODE(0x1807, "Recovered data with ECC - data rewritten")
drivers/scsi/sense_codes.h
227
SENSE_CODE(0x1808, "Recovered data with linking")
drivers/scsi/sense_codes.h
229
SENSE_CODE(0x1900, "Defect list error")
drivers/scsi/sense_codes.h
23
SENSE_CODE(0x0019, "Locate operation in progress")
drivers/scsi/sense_codes.h
230
SENSE_CODE(0x1901, "Defect list not available")
drivers/scsi/sense_codes.h
231
SENSE_CODE(0x1902, "Defect list error in primary list")
drivers/scsi/sense_codes.h
232
SENSE_CODE(0x1903, "Defect list error in grown list")
drivers/scsi/sense_codes.h
234
SENSE_CODE(0x1A00, "Parameter list length error")
drivers/scsi/sense_codes.h
236
SENSE_CODE(0x1B00, "Synchronous data transfer error")
drivers/scsi/sense_codes.h
238
SENSE_CODE(0x1C00, "Defect list not found")
drivers/scsi/sense_codes.h
239
SENSE_CODE(0x1C01, "Primary defect list not found")
drivers/scsi/sense_codes.h
24
SENSE_CODE(0x001A, "Rewind operation in progress")
drivers/scsi/sense_codes.h
240
SENSE_CODE(0x1C02, "Grown defect list not found")
drivers/scsi/sense_codes.h
242
SENSE_CODE(0x1D00, "Miscompare during verify operation")
drivers/scsi/sense_codes.h
243
SENSE_CODE(0x1D01, "Miscompare verify of unmapped LBA")
drivers/scsi/sense_codes.h
245
SENSE_CODE(0x1E00, "Recovered id with ECC correction")
drivers/scsi/sense_codes.h
247
SENSE_CODE(0x1F00, "Partial defect list transfer")
drivers/scsi/sense_codes.h
249
SENSE_CODE(0x2000, "Invalid command operation code")
drivers/scsi/sense_codes.h
25
SENSE_CODE(0x001B, "Set capacity operation in progress")
drivers/scsi/sense_codes.h
250
SENSE_CODE(0x2001, "Access denied - initiator pending-enrolled")
drivers/scsi/sense_codes.h
251
SENSE_CODE(0x2002, "Access denied - no access rights")
drivers/scsi/sense_codes.h
252
SENSE_CODE(0x2003, "Access denied - invalid mgmt id key")
drivers/scsi/sense_codes.h
253
SENSE_CODE(0x2004, "Illegal command while in write capable state")
drivers/scsi/sense_codes.h
254
SENSE_CODE(0x2005, "Obsolete")
drivers/scsi/sense_codes.h
255
SENSE_CODE(0x2006, "Illegal command while in explicit address mode")
drivers/scsi/sense_codes.h
256
SENSE_CODE(0x2007, "Illegal command while in implicit address mode")
drivers/scsi/sense_codes.h
257
SENSE_CODE(0x2008, "Access denied - enrollment conflict")
drivers/scsi/sense_codes.h
258
SENSE_CODE(0x2009, "Access denied - invalid LU identifier")
drivers/scsi/sense_codes.h
259
SENSE_CODE(0x200A, "Access denied - invalid proxy token")
drivers/scsi/sense_codes.h
26
SENSE_CODE(0x001C, "Verify operation in progress")
drivers/scsi/sense_codes.h
260
SENSE_CODE(0x200B, "Access denied - ACL LUN conflict")
drivers/scsi/sense_codes.h
261
SENSE_CODE(0x200C, "Illegal command when not in append-only mode")
drivers/scsi/sense_codes.h
262
SENSE_CODE(0x200D, "Not an administrative logical unit")
drivers/scsi/sense_codes.h
263
SENSE_CODE(0x200E, "Not a subsidiary logical unit")
drivers/scsi/sense_codes.h
264
SENSE_CODE(0x200F, "Not a conglomerate logical unit")
drivers/scsi/sense_codes.h
266
SENSE_CODE(0x2100, "Logical block address out of range")
drivers/scsi/sense_codes.h
267
SENSE_CODE(0x2101, "Invalid element address")
drivers/scsi/sense_codes.h
268
SENSE_CODE(0x2102, "Invalid address for write")
drivers/scsi/sense_codes.h
269
SENSE_CODE(0x2103, "Invalid write crossing layer jump")
drivers/scsi/sense_codes.h
27
SENSE_CODE(0x001D, "ATA pass through information available")
drivers/scsi/sense_codes.h
270
SENSE_CODE(0x2104, "Unaligned write command")
drivers/scsi/sense_codes.h
271
SENSE_CODE(0x2105, "Write boundary violation")
drivers/scsi/sense_codes.h
272
SENSE_CODE(0x2106, "Attempt to read invalid data")
drivers/scsi/sense_codes.h
273
SENSE_CODE(0x2107, "Read boundary violation")
drivers/scsi/sense_codes.h
274
SENSE_CODE(0x2108, "Misaligned write command")
drivers/scsi/sense_codes.h
275
SENSE_CODE(0x2109, "Attempt to access gap zone")
drivers/scsi/sense_codes.h
277
SENSE_CODE(0x2200, "Illegal function (use 20 00, 24 00, or 26 00)")
drivers/scsi/sense_codes.h
279
SENSE_CODE(0x2300, "Invalid token operation, cause not reportable")
drivers/scsi/sense_codes.h
28
SENSE_CODE(0x001E, "Conflicting SA creation request")
drivers/scsi/sense_codes.h
280
SENSE_CODE(0x2301, "Invalid token operation, unsupported token type")
drivers/scsi/sense_codes.h
281
SENSE_CODE(0x2302, "Invalid token operation, remote token usage not supported")
drivers/scsi/sense_codes.h
282
SENSE_CODE(0x2303, "Invalid token operation, remote rod token creation not supported")
drivers/scsi/sense_codes.h
283
SENSE_CODE(0x2304, "Invalid token operation, token unknown")
drivers/scsi/sense_codes.h
284
SENSE_CODE(0x2305, "Invalid token operation, token corrupt")
drivers/scsi/sense_codes.h
285
SENSE_CODE(0x2306, "Invalid token operation, token revoked")
drivers/scsi/sense_codes.h
286
SENSE_CODE(0x2307, "Invalid token operation, token expired")
drivers/scsi/sense_codes.h
287
SENSE_CODE(0x2308, "Invalid token operation, token cancelled")
drivers/scsi/sense_codes.h
288
SENSE_CODE(0x2309, "Invalid token operation, token deleted")
drivers/scsi/sense_codes.h
289
SENSE_CODE(0x230A, "Invalid token operation, invalid token length")
drivers/scsi/sense_codes.h
29
SENSE_CODE(0x001F, "Logical unit transitioning to another power condition")
drivers/scsi/sense_codes.h
291
SENSE_CODE(0x2400, "Invalid field in cdb")
drivers/scsi/sense_codes.h
292
SENSE_CODE(0x2401, "CDB decryption error")
drivers/scsi/sense_codes.h
293
SENSE_CODE(0x2402, "Obsolete")
drivers/scsi/sense_codes.h
294
SENSE_CODE(0x2403, "Obsolete")
drivers/scsi/sense_codes.h
295
SENSE_CODE(0x2404, "Security audit value frozen")
drivers/scsi/sense_codes.h
296
SENSE_CODE(0x2405, "Security working key frozen")
drivers/scsi/sense_codes.h
297
SENSE_CODE(0x2406, "Nonce not unique")
drivers/scsi/sense_codes.h
298
SENSE_CODE(0x2407, "Nonce timestamp out of range")
drivers/scsi/sense_codes.h
299
SENSE_CODE(0x2408, "Invalid XCDB")
drivers/scsi/sense_codes.h
30
SENSE_CODE(0x0020, "Extended copy information available")
drivers/scsi/sense_codes.h
300
SENSE_CODE(0x2409, "Invalid fast format")
drivers/scsi/sense_codes.h
302
SENSE_CODE(0x2500, "Logical unit not supported")
drivers/scsi/sense_codes.h
304
SENSE_CODE(0x2600, "Invalid field in parameter list")
drivers/scsi/sense_codes.h
305
SENSE_CODE(0x2601, "Parameter not supported")
drivers/scsi/sense_codes.h
306
SENSE_CODE(0x2602, "Parameter value invalid")
drivers/scsi/sense_codes.h
307
SENSE_CODE(0x2603, "Threshold parameters not supported")
drivers/scsi/sense_codes.h
308
SENSE_CODE(0x2604, "Invalid release of persistent reservation")
drivers/scsi/sense_codes.h
309
SENSE_CODE(0x2605, "Data decryption error")
drivers/scsi/sense_codes.h
31
SENSE_CODE(0x0021, "Atomic command aborted due to ACA")
drivers/scsi/sense_codes.h
310
SENSE_CODE(0x2606, "Too many target descriptors")
drivers/scsi/sense_codes.h
311
SENSE_CODE(0x2607, "Unsupported target descriptor type code")
drivers/scsi/sense_codes.h
312
SENSE_CODE(0x2608, "Too many segment descriptors")
drivers/scsi/sense_codes.h
313
SENSE_CODE(0x2609, "Unsupported segment descriptor type code")
drivers/scsi/sense_codes.h
314
SENSE_CODE(0x260A, "Unexpected inexact segment")
drivers/scsi/sense_codes.h
315
SENSE_CODE(0x260B, "Inline data length exceeded")
drivers/scsi/sense_codes.h
316
SENSE_CODE(0x260C, "Invalid operation for copy source or destination")
drivers/scsi/sense_codes.h
317
SENSE_CODE(0x260D, "Copy segment granularity violation")
drivers/scsi/sense_codes.h
318
SENSE_CODE(0x260E, "Invalid parameter while port is enabled")
drivers/scsi/sense_codes.h
319
SENSE_CODE(0x260F, "Invalid data-out buffer integrity check value")
drivers/scsi/sense_codes.h
32
SENSE_CODE(0x0022, "Deferred microcode is pending")
drivers/scsi/sense_codes.h
320
SENSE_CODE(0x2610, "Data decryption key fail limit reached")
drivers/scsi/sense_codes.h
321
SENSE_CODE(0x2611, "Incomplete key-associated data set")
drivers/scsi/sense_codes.h
322
SENSE_CODE(0x2612, "Vendor specific key reference not found")
drivers/scsi/sense_codes.h
323
SENSE_CODE(0x2613, "Application tag mode page is invalid")
drivers/scsi/sense_codes.h
324
SENSE_CODE(0x2614, "Tape stream mirroring prevented")
drivers/scsi/sense_codes.h
325
SENSE_CODE(0x2615, "Copy source or copy destination not authorized")
drivers/scsi/sense_codes.h
326
SENSE_CODE(0x2616, "Fast copy not possible")
drivers/scsi/sense_codes.h
328
SENSE_CODE(0x2700, "Write protected")
drivers/scsi/sense_codes.h
329
SENSE_CODE(0x2701, "Hardware write protected")
drivers/scsi/sense_codes.h
330
SENSE_CODE(0x2702, "Logical unit software write protected")
drivers/scsi/sense_codes.h
331
SENSE_CODE(0x2703, "Associated write protect")
drivers/scsi/sense_codes.h
332
SENSE_CODE(0x2704, "Persistent write protect")
drivers/scsi/sense_codes.h
333
SENSE_CODE(0x2705, "Permanent write protect")
drivers/scsi/sense_codes.h
334
SENSE_CODE(0x2706, "Conditional write protect")
drivers/scsi/sense_codes.h
335
SENSE_CODE(0x2707, "Space allocation failed write protect")
drivers/scsi/sense_codes.h
336
SENSE_CODE(0x2708, "Zone is read only")
drivers/scsi/sense_codes.h
338
SENSE_CODE(0x2800, "Not ready to ready change, medium may have changed")
drivers/scsi/sense_codes.h
339
SENSE_CODE(0x2801, "Import or export element accessed")
drivers/scsi/sense_codes.h
34
SENSE_CODE(0x0100, "No index/sector signal")
drivers/scsi/sense_codes.h
340
SENSE_CODE(0x2802, "Format-layer may have changed")
drivers/scsi/sense_codes.h
341
SENSE_CODE(0x2803, "Import/export element accessed, medium changed")
drivers/scsi/sense_codes.h
343
SENSE_CODE(0x2900, "Power on, reset, or bus device reset occurred")
drivers/scsi/sense_codes.h
344
SENSE_CODE(0x2901, "Power on occurred")
drivers/scsi/sense_codes.h
345
SENSE_CODE(0x2902, "Scsi bus reset occurred")
drivers/scsi/sense_codes.h
346
SENSE_CODE(0x2903, "Bus device reset function occurred")
drivers/scsi/sense_codes.h
347
SENSE_CODE(0x2904, "Device internal reset")
drivers/scsi/sense_codes.h
348
SENSE_CODE(0x2905, "Transceiver mode changed to single-ended")
drivers/scsi/sense_codes.h
349
SENSE_CODE(0x2906, "Transceiver mode changed to lvd")
drivers/scsi/sense_codes.h
350
SENSE_CODE(0x2907, "I_T nexus loss occurred")
drivers/scsi/sense_codes.h
352
SENSE_CODE(0x2A00, "Parameters changed")
drivers/scsi/sense_codes.h
353
SENSE_CODE(0x2A01, "Mode parameters changed")
drivers/scsi/sense_codes.h
354
SENSE_CODE(0x2A02, "Log parameters changed")
drivers/scsi/sense_codes.h
355
SENSE_CODE(0x2A03, "Reservations preempted")
drivers/scsi/sense_codes.h
356
SENSE_CODE(0x2A04, "Reservations released")
drivers/scsi/sense_codes.h
357
SENSE_CODE(0x2A05, "Registrations preempted")
drivers/scsi/sense_codes.h
358
SENSE_CODE(0x2A06, "Asymmetric access state changed")
drivers/scsi/sense_codes.h
359
SENSE_CODE(0x2A07, "Implicit asymmetric access state transition failed")
drivers/scsi/sense_codes.h
36
SENSE_CODE(0x0200, "No seek complete")
drivers/scsi/sense_codes.h
360
SENSE_CODE(0x2A08, "Priority changed")
drivers/scsi/sense_codes.h
361
SENSE_CODE(0x2A09, "Capacity data has changed")
drivers/scsi/sense_codes.h
362
SENSE_CODE(0x2A0A, "Error history I_T nexus cleared")
drivers/scsi/sense_codes.h
363
SENSE_CODE(0x2A0B, "Error history snapshot released")
drivers/scsi/sense_codes.h
364
SENSE_CODE(0x2A0C, "Error recovery attributes have changed")
drivers/scsi/sense_codes.h
365
SENSE_CODE(0x2A0D, "Data encryption capabilities changed")
drivers/scsi/sense_codes.h
366
SENSE_CODE(0x2A10, "Timestamp changed")
drivers/scsi/sense_codes.h
367
SENSE_CODE(0x2A11, "Data encryption parameters changed by another i_t nexus")
drivers/scsi/sense_codes.h
368
SENSE_CODE(0x2A12, "Data encryption parameters changed by vendor specific event")
drivers/scsi/sense_codes.h
369
SENSE_CODE(0x2A13, "Data encryption key instance counter has changed")
drivers/scsi/sense_codes.h
370
SENSE_CODE(0x2A14, "SA creation capabilities data has changed")
drivers/scsi/sense_codes.h
371
SENSE_CODE(0x2A15, "Medium removal prevention preempted")
drivers/scsi/sense_codes.h
372
SENSE_CODE(0x2A16, "Zone reset write pointer recommended")
drivers/scsi/sense_codes.h
374
SENSE_CODE(0x2B00, "Copy cannot execute since host cannot disconnect")
drivers/scsi/sense_codes.h
376
SENSE_CODE(0x2C00, "Command sequence error")
drivers/scsi/sense_codes.h
377
SENSE_CODE(0x2C01, "Too many windows specified")
drivers/scsi/sense_codes.h
378
SENSE_CODE(0x2C02, "Invalid combination of windows specified")
drivers/scsi/sense_codes.h
379
SENSE_CODE(0x2C03, "Current program area is not empty")
drivers/scsi/sense_codes.h
38
SENSE_CODE(0x0300, "Peripheral device write fault")
drivers/scsi/sense_codes.h
380
SENSE_CODE(0x2C04, "Current program area is empty")
drivers/scsi/sense_codes.h
381
SENSE_CODE(0x2C05, "Illegal power condition request")
drivers/scsi/sense_codes.h
382
SENSE_CODE(0x2C06, "Persistent prevent conflict")
drivers/scsi/sense_codes.h
383
SENSE_CODE(0x2C07, "Previous busy status")
drivers/scsi/sense_codes.h
384
SENSE_CODE(0x2C08, "Previous task set full status")
drivers/scsi/sense_codes.h
385
SENSE_CODE(0x2C09, "Previous reservation conflict status")
drivers/scsi/sense_codes.h
386
SENSE_CODE(0x2C0A, "Partition or collection contains user objects")
drivers/scsi/sense_codes.h
387
SENSE_CODE(0x2C0B, "Not reserved")
drivers/scsi/sense_codes.h
388
SENSE_CODE(0x2C0C, "Orwrite generation does not match")
drivers/scsi/sense_codes.h
389
SENSE_CODE(0x2C0D, "Reset write pointer not allowed")
drivers/scsi/sense_codes.h
39
SENSE_CODE(0x0301, "No write current")
drivers/scsi/sense_codes.h
390
SENSE_CODE(0x2C0E, "Zone is offline")
drivers/scsi/sense_codes.h
391
SENSE_CODE(0x2C0F, "Stream not open")
drivers/scsi/sense_codes.h
392
SENSE_CODE(0x2C10, "Unwritten data in zone")
drivers/scsi/sense_codes.h
393
SENSE_CODE(0x2C11, "Descriptor format sense data required")
drivers/scsi/sense_codes.h
394
SENSE_CODE(0x2C12, "Zone is inactive")
drivers/scsi/sense_codes.h
395
SENSE_CODE(0x2C13, "Well known logical unit access required")
drivers/scsi/sense_codes.h
397
SENSE_CODE(0x2D00, "Overwrite error on update in place")
drivers/scsi/sense_codes.h
399
SENSE_CODE(0x2E00, "Insufficient time for operation")
drivers/scsi/sense_codes.h
40
SENSE_CODE(0x0302, "Excessive write errors")
drivers/scsi/sense_codes.h
400
SENSE_CODE(0x2E01, "Command timeout before processing")
drivers/scsi/sense_codes.h
401
SENSE_CODE(0x2E02, "Command timeout during processing")
drivers/scsi/sense_codes.h
402
SENSE_CODE(0x2E03, "Command timeout during processing due to error recovery")
drivers/scsi/sense_codes.h
404
SENSE_CODE(0x2F00, "Commands cleared by another initiator")
drivers/scsi/sense_codes.h
405
SENSE_CODE(0x2F01, "Commands cleared by power loss notification")
drivers/scsi/sense_codes.h
406
SENSE_CODE(0x2F02, "Commands cleared by device server")
drivers/scsi/sense_codes.h
407
SENSE_CODE(0x2F03, "Some commands cleared by queuing layer event")
drivers/scsi/sense_codes.h
409
SENSE_CODE(0x3000, "Incompatible medium installed")
drivers/scsi/sense_codes.h
410
SENSE_CODE(0x3001, "Cannot read medium - unknown format")
drivers/scsi/sense_codes.h
411
SENSE_CODE(0x3002, "Cannot read medium - incompatible format")
drivers/scsi/sense_codes.h
412
SENSE_CODE(0x3003, "Cleaning cartridge installed")
drivers/scsi/sense_codes.h
413
SENSE_CODE(0x3004, "Cannot write medium - unknown format")
drivers/scsi/sense_codes.h
414
SENSE_CODE(0x3005, "Cannot write medium - incompatible format")
drivers/scsi/sense_codes.h
415
SENSE_CODE(0x3006, "Cannot format medium - incompatible medium")
drivers/scsi/sense_codes.h
416
SENSE_CODE(0x3007, "Cleaning failure")
drivers/scsi/sense_codes.h
417
SENSE_CODE(0x3008, "Cannot write - application code mismatch")
drivers/scsi/sense_codes.h
418
SENSE_CODE(0x3009, "Current session not fixated for append")
drivers/scsi/sense_codes.h
419
SENSE_CODE(0x300A, "Cleaning request rejected")
drivers/scsi/sense_codes.h
42
SENSE_CODE(0x0400, "Logical unit not ready, cause not reportable")
drivers/scsi/sense_codes.h
420
SENSE_CODE(0x300C, "WORM medium - overwrite attempted")
drivers/scsi/sense_codes.h
421
SENSE_CODE(0x300D, "WORM medium - integrity check")
drivers/scsi/sense_codes.h
422
SENSE_CODE(0x3010, "Medium not formatted")
drivers/scsi/sense_codes.h
423
SENSE_CODE(0x3011, "Incompatible volume type")
drivers/scsi/sense_codes.h
424
SENSE_CODE(0x3012, "Incompatible volume qualifier")
drivers/scsi/sense_codes.h
425
SENSE_CODE(0x3013, "Cleaning volume expired")
drivers/scsi/sense_codes.h
427
SENSE_CODE(0x3100, "Medium format corrupted")
drivers/scsi/sense_codes.h
428
SENSE_CODE(0x3101, "Format command failed")
drivers/scsi/sense_codes.h
429
SENSE_CODE(0x3102, "Zoned formatting failed due to spare linking")
drivers/scsi/sense_codes.h
43
SENSE_CODE(0x0401, "Logical unit is in process of becoming ready")
drivers/scsi/sense_codes.h
430
SENSE_CODE(0x3103, "Sanitize command failed")
drivers/scsi/sense_codes.h
431
SENSE_CODE(0x3104, "Depopulation failed")
drivers/scsi/sense_codes.h
432
SENSE_CODE(0x3105, "Depopulation restoration failed")
drivers/scsi/sense_codes.h
434
SENSE_CODE(0x3200, "No defect spare location available")
drivers/scsi/sense_codes.h
435
SENSE_CODE(0x3201, "Defect list update failure")
drivers/scsi/sense_codes.h
437
SENSE_CODE(0x3300, "Tape length error")
drivers/scsi/sense_codes.h
439
SENSE_CODE(0x3400, "Enclosure failure")
drivers/scsi/sense_codes.h
44
SENSE_CODE(0x0402, "Logical unit not ready, initializing command required")
drivers/scsi/sense_codes.h
441
SENSE_CODE(0x3500, "Enclosure services failure")
drivers/scsi/sense_codes.h
442
SENSE_CODE(0x3501, "Unsupported enclosure function")
drivers/scsi/sense_codes.h
443
SENSE_CODE(0x3502, "Enclosure services unavailable")
drivers/scsi/sense_codes.h
444
SENSE_CODE(0x3503, "Enclosure services transfer failure")
drivers/scsi/sense_codes.h
445
SENSE_CODE(0x3504, "Enclosure services transfer refused")
drivers/scsi/sense_codes.h
446
SENSE_CODE(0x3505, "Enclosure services checksum error")
drivers/scsi/sense_codes.h
448
SENSE_CODE(0x3600, "Ribbon, ink, or toner failure")
drivers/scsi/sense_codes.h
45
SENSE_CODE(0x0403, "Logical unit not ready, manual intervention required")
drivers/scsi/sense_codes.h
450
SENSE_CODE(0x3700, "Rounded parameter")
drivers/scsi/sense_codes.h
452
SENSE_CODE(0x3800, "Event status notification")
drivers/scsi/sense_codes.h
453
SENSE_CODE(0x3802, "Esn - power management class event")
drivers/scsi/sense_codes.h
454
SENSE_CODE(0x3804, "Esn - media class event")
drivers/scsi/sense_codes.h
455
SENSE_CODE(0x3806, "Esn - device busy class event")
drivers/scsi/sense_codes.h
456
SENSE_CODE(0x3807, "Thin Provisioning soft threshold reached")
drivers/scsi/sense_codes.h
457
SENSE_CODE(0x3808, "Depopulation interrupted")
drivers/scsi/sense_codes.h
459
SENSE_CODE(0x3900, "Saving parameters not supported")
drivers/scsi/sense_codes.h
46
SENSE_CODE(0x0404, "Logical unit not ready, format in progress")
drivers/scsi/sense_codes.h
461
SENSE_CODE(0x3A00, "Medium not present")
drivers/scsi/sense_codes.h
462
SENSE_CODE(0x3A01, "Medium not present - tray closed")
drivers/scsi/sense_codes.h
463
SENSE_CODE(0x3A02, "Medium not present - tray open")
drivers/scsi/sense_codes.h
464
SENSE_CODE(0x3A03, "Medium not present - loadable")
drivers/scsi/sense_codes.h
465
SENSE_CODE(0x3A04, "Medium not present - medium auxiliary memory accessible")
drivers/scsi/sense_codes.h
467
SENSE_CODE(0x3B00, "Sequential positioning error")
drivers/scsi/sense_codes.h
468
SENSE_CODE(0x3B01, "Tape position error at beginning-of-medium")
drivers/scsi/sense_codes.h
469
SENSE_CODE(0x3B02, "Tape position error at end-of-medium")
drivers/scsi/sense_codes.h
47
SENSE_CODE(0x0405, "Logical unit not ready, rebuild in progress")
drivers/scsi/sense_codes.h
470
SENSE_CODE(0x3B03, "Tape or electronic vertical forms unit not ready")
drivers/scsi/sense_codes.h
471
SENSE_CODE(0x3B04, "Slew failure")
drivers/scsi/sense_codes.h
472
SENSE_CODE(0x3B05, "Paper jam")
drivers/scsi/sense_codes.h
473
SENSE_CODE(0x3B06, "Failed to sense top-of-form")
drivers/scsi/sense_codes.h
474
SENSE_CODE(0x3B07, "Failed to sense bottom-of-form")
drivers/scsi/sense_codes.h
475
SENSE_CODE(0x3B08, "Reposition error")
drivers/scsi/sense_codes.h
476
SENSE_CODE(0x3B09, "Read past end of medium")
drivers/scsi/sense_codes.h
477
SENSE_CODE(0x3B0A, "Read past beginning of medium")
drivers/scsi/sense_codes.h
478
SENSE_CODE(0x3B0B, "Position past end of medium")
drivers/scsi/sense_codes.h
479
SENSE_CODE(0x3B0C, "Position past beginning of medium")
drivers/scsi/sense_codes.h
48
SENSE_CODE(0x0406, "Logical unit not ready, recalculation in progress")
drivers/scsi/sense_codes.h
480
SENSE_CODE(0x3B0D, "Medium destination element full")
drivers/scsi/sense_codes.h
481
SENSE_CODE(0x3B0E, "Medium source element empty")
drivers/scsi/sense_codes.h
482
SENSE_CODE(0x3B0F, "End of medium reached")
drivers/scsi/sense_codes.h
483
SENSE_CODE(0x3B11, "Medium magazine not accessible")
drivers/scsi/sense_codes.h
484
SENSE_CODE(0x3B12, "Medium magazine removed")
drivers/scsi/sense_codes.h
485
SENSE_CODE(0x3B13, "Medium magazine inserted")
drivers/scsi/sense_codes.h
486
SENSE_CODE(0x3B14, "Medium magazine locked")
drivers/scsi/sense_codes.h
487
SENSE_CODE(0x3B15, "Medium magazine unlocked")
drivers/scsi/sense_codes.h
488
SENSE_CODE(0x3B16, "Mechanical positioning or changer error")
drivers/scsi/sense_codes.h
489
SENSE_CODE(0x3B17, "Read past end of user object")
drivers/scsi/sense_codes.h
49
SENSE_CODE(0x0407, "Logical unit not ready, operation in progress")
drivers/scsi/sense_codes.h
490
SENSE_CODE(0x3B18, "Element disabled")
drivers/scsi/sense_codes.h
491
SENSE_CODE(0x3B19, "Element enabled")
drivers/scsi/sense_codes.h
492
SENSE_CODE(0x3B1A, "Data transfer device removed")
drivers/scsi/sense_codes.h
493
SENSE_CODE(0x3B1B, "Data transfer device inserted")
drivers/scsi/sense_codes.h
494
SENSE_CODE(0x3B1C, "Too many logical objects on partition to support operation")
drivers/scsi/sense_codes.h
495
SENSE_CODE(0x3B20, "Element static information changed")
drivers/scsi/sense_codes.h
497
SENSE_CODE(0x3D00, "Invalid bits in identify message")
drivers/scsi/sense_codes.h
499
SENSE_CODE(0x3E00, "Logical unit has not self-configured yet")
drivers/scsi/sense_codes.h
50
SENSE_CODE(0x0408, "Logical unit not ready, long write in progress")
drivers/scsi/sense_codes.h
500
SENSE_CODE(0x3E01, "Logical unit failure")
drivers/scsi/sense_codes.h
501
SENSE_CODE(0x3E02, "Timeout on logical unit")
drivers/scsi/sense_codes.h
502
SENSE_CODE(0x3E03, "Logical unit failed self-test")
drivers/scsi/sense_codes.h
503
SENSE_CODE(0x3E04, "Logical unit unable to update self-test log")
drivers/scsi/sense_codes.h
505
SENSE_CODE(0x3F00, "Target operating conditions have changed")
drivers/scsi/sense_codes.h
506
SENSE_CODE(0x3F01, "Microcode has been changed")
drivers/scsi/sense_codes.h
507
SENSE_CODE(0x3F02, "Changed operating definition")
drivers/scsi/sense_codes.h
508
SENSE_CODE(0x3F03, "Inquiry data has changed")
drivers/scsi/sense_codes.h
509
SENSE_CODE(0x3F04, "Component device attached")
drivers/scsi/sense_codes.h
51
SENSE_CODE(0x0409, "Logical unit not ready, self-test in progress")
drivers/scsi/sense_codes.h
510
SENSE_CODE(0x3F05, "Device identifier changed")
drivers/scsi/sense_codes.h
511
SENSE_CODE(0x3F06, "Redundancy group created or modified")
drivers/scsi/sense_codes.h
512
SENSE_CODE(0x3F07, "Redundancy group deleted")
drivers/scsi/sense_codes.h
513
SENSE_CODE(0x3F08, "Spare created or modified")
drivers/scsi/sense_codes.h
514
SENSE_CODE(0x3F09, "Spare deleted")
drivers/scsi/sense_codes.h
515
SENSE_CODE(0x3F0A, "Volume set created or modified")
drivers/scsi/sense_codes.h
516
SENSE_CODE(0x3F0B, "Volume set deleted")
drivers/scsi/sense_codes.h
517
SENSE_CODE(0x3F0C, "Volume set deassigned")
drivers/scsi/sense_codes.h
518
SENSE_CODE(0x3F0D, "Volume set reassigned")
drivers/scsi/sense_codes.h
519
SENSE_CODE(0x3F0E, "Reported luns data has changed")
drivers/scsi/sense_codes.h
52
SENSE_CODE(0x040A, "Logical unit not accessible, asymmetric access state transition")
drivers/scsi/sense_codes.h
520
SENSE_CODE(0x3F0F, "Echo buffer overwritten")
drivers/scsi/sense_codes.h
521
SENSE_CODE(0x3F10, "Medium loadable")
drivers/scsi/sense_codes.h
522
SENSE_CODE(0x3F11, "Medium auxiliary memory accessible")
drivers/scsi/sense_codes.h
523
SENSE_CODE(0x3F12, "iSCSI IP address added")
drivers/scsi/sense_codes.h
524
SENSE_CODE(0x3F13, "iSCSI IP address removed")
drivers/scsi/sense_codes.h
525
SENSE_CODE(0x3F14, "iSCSI IP address changed")
drivers/scsi/sense_codes.h
526
SENSE_CODE(0x3F15, "Inspect referrals sense descriptors")
drivers/scsi/sense_codes.h
527
SENSE_CODE(0x3F16, "Microcode has been changed without reset")
drivers/scsi/sense_codes.h
528
SENSE_CODE(0x3F17, "Zone transition to full")
drivers/scsi/sense_codes.h
529
SENSE_CODE(0x3F18, "Bind completed")
drivers/scsi/sense_codes.h
53
SENSE_CODE(0x040B, "Logical unit not accessible, target port in standby state")
drivers/scsi/sense_codes.h
530
SENSE_CODE(0x3F19, "Bind redirected")
drivers/scsi/sense_codes.h
531
SENSE_CODE(0x3F1A, "Subsidiary binding changed")
drivers/scsi/sense_codes.h
539
SENSE_CODE(0x4300, "Message error")
drivers/scsi/sense_codes.h
54
SENSE_CODE(0x040C, "Logical unit not accessible, target port in unavailable state")
drivers/scsi/sense_codes.h
541
SENSE_CODE(0x4400, "Internal target failure")
drivers/scsi/sense_codes.h
542
SENSE_CODE(0x4401, "Persistent reservation information lost")
drivers/scsi/sense_codes.h
543
SENSE_CODE(0x4471, "ATA device failed set features")
drivers/scsi/sense_codes.h
545
SENSE_CODE(0x4500, "Select or reselect failure")
drivers/scsi/sense_codes.h
547
SENSE_CODE(0x4600, "Unsuccessful soft reset")
drivers/scsi/sense_codes.h
549
SENSE_CODE(0x4700, "Scsi parity error")
drivers/scsi/sense_codes.h
55
SENSE_CODE(0x040D, "Logical unit not ready, structure check required")
drivers/scsi/sense_codes.h
550
SENSE_CODE(0x4701, "Data phase CRC error detected")
drivers/scsi/sense_codes.h
551
SENSE_CODE(0x4702, "Scsi parity error detected during st data phase")
drivers/scsi/sense_codes.h
552
SENSE_CODE(0x4703, "Information unit iuCRC error detected")
drivers/scsi/sense_codes.h
553
SENSE_CODE(0x4704, "Asynchronous information protection error detected")
drivers/scsi/sense_codes.h
554
SENSE_CODE(0x4705, "Protocol service CRC error")
drivers/scsi/sense_codes.h
555
SENSE_CODE(0x4706, "Phy test function in progress")
drivers/scsi/sense_codes.h
556
SENSE_CODE(0x477f, "Some commands cleared by iSCSI Protocol event")
drivers/scsi/sense_codes.h
558
SENSE_CODE(0x4800, "Initiator detected error message received")
drivers/scsi/sense_codes.h
56
SENSE_CODE(0x040E, "Logical unit not ready, security session in progress")
drivers/scsi/sense_codes.h
560
SENSE_CODE(0x4900, "Invalid message error")
drivers/scsi/sense_codes.h
562
SENSE_CODE(0x4A00, "Command phase error")
drivers/scsi/sense_codes.h
564
SENSE_CODE(0x4B00, "Data phase error")
drivers/scsi/sense_codes.h
565
SENSE_CODE(0x4B01, "Invalid target port transfer tag received")
drivers/scsi/sense_codes.h
566
SENSE_CODE(0x4B02, "Too much write data")
drivers/scsi/sense_codes.h
567
SENSE_CODE(0x4B03, "Ack/nak timeout")
drivers/scsi/sense_codes.h
568
SENSE_CODE(0x4B04, "Nak received")
drivers/scsi/sense_codes.h
569
SENSE_CODE(0x4B05, "Data offset error")
drivers/scsi/sense_codes.h
57
SENSE_CODE(0x0410, "Logical unit not ready, auxiliary memory not accessible")
drivers/scsi/sense_codes.h
570
SENSE_CODE(0x4B06, "Initiator response timeout")
drivers/scsi/sense_codes.h
571
SENSE_CODE(0x4B07, "Connection lost")
drivers/scsi/sense_codes.h
572
SENSE_CODE(0x4B08, "Data-in buffer overflow - data buffer size")
drivers/scsi/sense_codes.h
573
SENSE_CODE(0x4B09, "Data-in buffer overflow - data buffer descriptor area")
drivers/scsi/sense_codes.h
574
SENSE_CODE(0x4B0A, "Data-in buffer error")
drivers/scsi/sense_codes.h
575
SENSE_CODE(0x4B0B, "Data-out buffer overflow - data buffer size")
drivers/scsi/sense_codes.h
576
SENSE_CODE(0x4B0C, "Data-out buffer overflow - data buffer descriptor area")
drivers/scsi/sense_codes.h
577
SENSE_CODE(0x4B0D, "Data-out buffer error")
drivers/scsi/sense_codes.h
578
SENSE_CODE(0x4B0E, "PCIe fabric error")
drivers/scsi/sense_codes.h
579
SENSE_CODE(0x4B0F, "PCIe completion timeout")
drivers/scsi/sense_codes.h
58
SENSE_CODE(0x0411, "Logical unit not ready, notify (enable spinup) required")
drivers/scsi/sense_codes.h
580
SENSE_CODE(0x4B10, "PCIe completer abort")
drivers/scsi/sense_codes.h
581
SENSE_CODE(0x4B11, "PCIe poisoned tlp received")
drivers/scsi/sense_codes.h
582
SENSE_CODE(0x4B12, "PCIe eCRC check failed")
drivers/scsi/sense_codes.h
583
SENSE_CODE(0x4B13, "PCIe unsupported request")
drivers/scsi/sense_codes.h
584
SENSE_CODE(0x4B14, "PCIe acs violation")
drivers/scsi/sense_codes.h
585
SENSE_CODE(0x4B15, "PCIe tlp prefix blocked")
drivers/scsi/sense_codes.h
587
SENSE_CODE(0x4C00, "Logical unit failed self-configuration")
drivers/scsi/sense_codes.h
59
SENSE_CODE(0x0412, "Logical unit not ready, offline")
drivers/scsi/sense_codes.h
591
SENSE_CODE(0x4E00, "Overlapped commands attempted")
drivers/scsi/sense_codes.h
593
SENSE_CODE(0x5000, "Write append error")
drivers/scsi/sense_codes.h
594
SENSE_CODE(0x5001, "Write append position error")
drivers/scsi/sense_codes.h
595
SENSE_CODE(0x5002, "Position error related to timing")
drivers/scsi/sense_codes.h
597
SENSE_CODE(0x5100, "Erase failure")
drivers/scsi/sense_codes.h
598
SENSE_CODE(0x5101, "Erase failure - incomplete erase operation detected")
drivers/scsi/sense_codes.h
60
SENSE_CODE(0x0413, "Logical unit not ready, SA creation in progress")
drivers/scsi/sense_codes.h
600
SENSE_CODE(0x5200, "Cartridge fault")
drivers/scsi/sense_codes.h
602
SENSE_CODE(0x5300, "Media load or eject failed")
drivers/scsi/sense_codes.h
603
SENSE_CODE(0x5301, "Unload tape failure")
drivers/scsi/sense_codes.h
604
SENSE_CODE(0x5302, "Medium removal prevented")
drivers/scsi/sense_codes.h
605
SENSE_CODE(0x5303, "Medium removal prevented by data transfer element")
drivers/scsi/sense_codes.h
606
SENSE_CODE(0x5304, "Medium thread or unthread failure")
drivers/scsi/sense_codes.h
607
SENSE_CODE(0x5305, "Volume identifier invalid")
drivers/scsi/sense_codes.h
608
SENSE_CODE(0x5306, "Volume identifier missing")
drivers/scsi/sense_codes.h
609
SENSE_CODE(0x5307, "Duplicate volume identifier")
drivers/scsi/sense_codes.h
61
SENSE_CODE(0x0414, "Logical unit not ready, space allocation in progress")
drivers/scsi/sense_codes.h
610
SENSE_CODE(0x5308, "Element status unknown")
drivers/scsi/sense_codes.h
611
SENSE_CODE(0x5309, "Data transfer device error - load failed")
drivers/scsi/sense_codes.h
612
SENSE_CODE(0x530a, "Data transfer device error - unload failed")
drivers/scsi/sense_codes.h
613
SENSE_CODE(0x530b, "Data transfer device error - unload missing")
drivers/scsi/sense_codes.h
614
SENSE_CODE(0x530c, "Data transfer device error - eject failed")
drivers/scsi/sense_codes.h
615
SENSE_CODE(0x530d, "Data transfer device error - library communication failed")
drivers/scsi/sense_codes.h
617
SENSE_CODE(0x5400, "Scsi to host system interface failure")
drivers/scsi/sense_codes.h
619
SENSE_CODE(0x5500, "System resource failure")
drivers/scsi/sense_codes.h
62
SENSE_CODE(0x0415, "Logical unit not ready, robotics disabled")
drivers/scsi/sense_codes.h
620
SENSE_CODE(0x5501, "System buffer full")
drivers/scsi/sense_codes.h
621
SENSE_CODE(0x5502, "Insufficient reservation resources")
drivers/scsi/sense_codes.h
622
SENSE_CODE(0x5503, "Insufficient resources")
drivers/scsi/sense_codes.h
623
SENSE_CODE(0x5504, "Insufficient registration resources")
drivers/scsi/sense_codes.h
624
SENSE_CODE(0x5505, "Insufficient access control resources")
drivers/scsi/sense_codes.h
625
SENSE_CODE(0x5506, "Auxiliary memory out of space")
drivers/scsi/sense_codes.h
626
SENSE_CODE(0x5507, "Quota error")
drivers/scsi/sense_codes.h
627
SENSE_CODE(0x5508, "Maximum number of supplemental decryption keys exceeded")
drivers/scsi/sense_codes.h
628
SENSE_CODE(0x5509, "Medium auxiliary memory not accessible")
drivers/scsi/sense_codes.h
629
SENSE_CODE(0x550A, "Data currently unavailable")
drivers/scsi/sense_codes.h
63
SENSE_CODE(0x0416, "Logical unit not ready, configuration required")
drivers/scsi/sense_codes.h
630
SENSE_CODE(0x550B, "Insufficient power for operation")
drivers/scsi/sense_codes.h
631
SENSE_CODE(0x550C, "Insufficient resources to create rod")
drivers/scsi/sense_codes.h
632
SENSE_CODE(0x550D, "Insufficient resources to create rod token")
drivers/scsi/sense_codes.h
633
SENSE_CODE(0x550E, "Insufficient zone resources")
drivers/scsi/sense_codes.h
634
SENSE_CODE(0x550F, "Insufficient zone resources to complete write")
drivers/scsi/sense_codes.h
635
SENSE_CODE(0x5510, "Maximum number of streams open")
drivers/scsi/sense_codes.h
636
SENSE_CODE(0x5511, "Insufficient resources to bind")
drivers/scsi/sense_codes.h
638
SENSE_CODE(0x5700, "Unable to recover table-of-contents")
drivers/scsi/sense_codes.h
64
SENSE_CODE(0x0417, "Logical unit not ready, calibration required")
drivers/scsi/sense_codes.h
640
SENSE_CODE(0x5800, "Generation does not exist")
drivers/scsi/sense_codes.h
642
SENSE_CODE(0x5900, "Updated block read")
drivers/scsi/sense_codes.h
644
SENSE_CODE(0x5A00, "Operator request or state change input")
drivers/scsi/sense_codes.h
645
SENSE_CODE(0x5A01, "Operator medium removal request")
drivers/scsi/sense_codes.h
646
SENSE_CODE(0x5A02, "Operator selected write protect")
drivers/scsi/sense_codes.h
647
SENSE_CODE(0x5A03, "Operator selected write permit")
drivers/scsi/sense_codes.h
649
SENSE_CODE(0x5B00, "Log exception")
drivers/scsi/sense_codes.h
65
SENSE_CODE(0x0418, "Logical unit not ready, a door is open")
drivers/scsi/sense_codes.h
650
SENSE_CODE(0x5B01, "Threshold condition met")
drivers/scsi/sense_codes.h
651
SENSE_CODE(0x5B02, "Log counter at maximum")
drivers/scsi/sense_codes.h
652
SENSE_CODE(0x5B03, "Log list codes exhausted")
drivers/scsi/sense_codes.h
654
SENSE_CODE(0x5C00, "Rpl status change")
drivers/scsi/sense_codes.h
655
SENSE_CODE(0x5C01, "Spindles synchronized")
drivers/scsi/sense_codes.h
656
SENSE_CODE(0x5C02, "Spindles not synchronized")
drivers/scsi/sense_codes.h
658
SENSE_CODE(0x5D00, "Failure prediction threshold exceeded")
drivers/scsi/sense_codes.h
659
SENSE_CODE(0x5D01, "Media failure prediction threshold exceeded")
drivers/scsi/sense_codes.h
66
SENSE_CODE(0x0419, "Logical unit not ready, operating in sequential mode")
drivers/scsi/sense_codes.h
660
SENSE_CODE(0x5D02, "Logical unit failure prediction threshold exceeded")
drivers/scsi/sense_codes.h
661
SENSE_CODE(0x5D03, "Spare area exhaustion prediction threshold exceeded")
drivers/scsi/sense_codes.h
662
SENSE_CODE(0x5D10, "Hardware impending failure general hard drive failure")
drivers/scsi/sense_codes.h
663
SENSE_CODE(0x5D11, "Hardware impending failure drive error rate too high")
drivers/scsi/sense_codes.h
664
SENSE_CODE(0x5D12, "Hardware impending failure data error rate too high")
drivers/scsi/sense_codes.h
665
SENSE_CODE(0x5D13, "Hardware impending failure seek error rate too high")
drivers/scsi/sense_codes.h
666
SENSE_CODE(0x5D14, "Hardware impending failure too many block reassigns")
drivers/scsi/sense_codes.h
667
SENSE_CODE(0x5D15, "Hardware impending failure access times too high")
drivers/scsi/sense_codes.h
668
SENSE_CODE(0x5D16, "Hardware impending failure start unit times too high")
drivers/scsi/sense_codes.h
669
SENSE_CODE(0x5D17, "Hardware impending failure channel parametrics")
drivers/scsi/sense_codes.h
67
SENSE_CODE(0x041A, "Logical unit not ready, start stop unit command in progress")
drivers/scsi/sense_codes.h
670
SENSE_CODE(0x5D18, "Hardware impending failure controller detected")
drivers/scsi/sense_codes.h
671
SENSE_CODE(0x5D19, "Hardware impending failure throughput performance")
drivers/scsi/sense_codes.h
672
SENSE_CODE(0x5D1A, "Hardware impending failure seek time performance")
drivers/scsi/sense_codes.h
673
SENSE_CODE(0x5D1B, "Hardware impending failure spin-up retry count")
drivers/scsi/sense_codes.h
674
SENSE_CODE(0x5D1C, "Hardware impending failure drive calibration retry count")
drivers/scsi/sense_codes.h
675
SENSE_CODE(0x5D20, "Controller impending failure general hard drive failure")
drivers/scsi/sense_codes.h
676
SENSE_CODE(0x5D21, "Controller impending failure drive error rate too high")
drivers/scsi/sense_codes.h
677
SENSE_CODE(0x5D22, "Controller impending failure data error rate too high")
drivers/scsi/sense_codes.h
678
SENSE_CODE(0x5D23, "Controller impending failure seek error rate too high")
drivers/scsi/sense_codes.h
679
SENSE_CODE(0x5D24, "Controller impending failure too many block reassigns")
drivers/scsi/sense_codes.h
68
SENSE_CODE(0x041B, "Logical unit not ready, sanitize in progress")
drivers/scsi/sense_codes.h
680
SENSE_CODE(0x5D25, "Controller impending failure access times too high")
drivers/scsi/sense_codes.h
681
SENSE_CODE(0x5D26, "Controller impending failure start unit times too high")
drivers/scsi/sense_codes.h
682
SENSE_CODE(0x5D27, "Controller impending failure channel parametrics")
drivers/scsi/sense_codes.h
683
SENSE_CODE(0x5D28, "Controller impending failure controller detected")
drivers/scsi/sense_codes.h
684
SENSE_CODE(0x5D29, "Controller impending failure throughput performance")
drivers/scsi/sense_codes.h
685
SENSE_CODE(0x5D2A, "Controller impending failure seek time performance")
drivers/scsi/sense_codes.h
686
SENSE_CODE(0x5D2B, "Controller impending failure spin-up retry count")
drivers/scsi/sense_codes.h
687
SENSE_CODE(0x5D2C, "Controller impending failure drive calibration retry count")
drivers/scsi/sense_codes.h
688
SENSE_CODE(0x5D30, "Data channel impending failure general hard drive failure")
drivers/scsi/sense_codes.h
689
SENSE_CODE(0x5D31, "Data channel impending failure drive error rate too high")
drivers/scsi/sense_codes.h
69
SENSE_CODE(0x041C, "Logical unit not ready, additional power use not yet granted")
drivers/scsi/sense_codes.h
690
SENSE_CODE(0x5D32, "Data channel impending failure data error rate too high")
drivers/scsi/sense_codes.h
691
SENSE_CODE(0x5D33, "Data channel impending failure seek error rate too high")
drivers/scsi/sense_codes.h
692
SENSE_CODE(0x5D34, "Data channel impending failure too many block reassigns")
drivers/scsi/sense_codes.h
693
SENSE_CODE(0x5D35, "Data channel impending failure access times too high")
drivers/scsi/sense_codes.h
694
SENSE_CODE(0x5D36, "Data channel impending failure start unit times too high")
drivers/scsi/sense_codes.h
695
SENSE_CODE(0x5D37, "Data channel impending failure channel parametrics")
drivers/scsi/sense_codes.h
696
SENSE_CODE(0x5D38, "Data channel impending failure controller detected")
drivers/scsi/sense_codes.h
697
SENSE_CODE(0x5D39, "Data channel impending failure throughput performance")
drivers/scsi/sense_codes.h
698
SENSE_CODE(0x5D3A, "Data channel impending failure seek time performance")
drivers/scsi/sense_codes.h
699
SENSE_CODE(0x5D3B, "Data channel impending failure spin-up retry count")
drivers/scsi/sense_codes.h
7
SENSE_CODE(0x0000, "No additional sense information")
drivers/scsi/sense_codes.h
70
SENSE_CODE(0x041D, "Logical unit not ready, configuration in progress")
drivers/scsi/sense_codes.h
700
SENSE_CODE(0x5D3C, "Data channel impending failure drive calibration retry count")
drivers/scsi/sense_codes.h
701
SENSE_CODE(0x5D40, "Servo impending failure general hard drive failure")
drivers/scsi/sense_codes.h
702
SENSE_CODE(0x5D41, "Servo impending failure drive error rate too high")
drivers/scsi/sense_codes.h
703
SENSE_CODE(0x5D42, "Servo impending failure data error rate too high")
drivers/scsi/sense_codes.h
704
SENSE_CODE(0x5D43, "Servo impending failure seek error rate too high")
drivers/scsi/sense_codes.h
705
SENSE_CODE(0x5D44, "Servo impending failure too many block reassigns")
drivers/scsi/sense_codes.h
706
SENSE_CODE(0x5D45, "Servo impending failure access times too high")
drivers/scsi/sense_codes.h
707
SENSE_CODE(0x5D46, "Servo impending failure start unit times too high")
drivers/scsi/sense_codes.h
708
SENSE_CODE(0x5D47, "Servo impending failure channel parametrics")
drivers/scsi/sense_codes.h
709
SENSE_CODE(0x5D48, "Servo impending failure controller detected")
drivers/scsi/sense_codes.h
71
SENSE_CODE(0x041E, "Logical unit not ready, microcode activation required")
drivers/scsi/sense_codes.h
710
SENSE_CODE(0x5D49, "Servo impending failure throughput performance")
drivers/scsi/sense_codes.h
711
SENSE_CODE(0x5D4A, "Servo impending failure seek time performance")
drivers/scsi/sense_codes.h
712
SENSE_CODE(0x5D4B, "Servo impending failure spin-up retry count")
drivers/scsi/sense_codes.h
713
SENSE_CODE(0x5D4C, "Servo impending failure drive calibration retry count")
drivers/scsi/sense_codes.h
714
SENSE_CODE(0x5D50, "Spindle impending failure general hard drive failure")
drivers/scsi/sense_codes.h
715
SENSE_CODE(0x5D51, "Spindle impending failure drive error rate too high")
drivers/scsi/sense_codes.h
716
SENSE_CODE(0x5D52, "Spindle impending failure data error rate too high")
drivers/scsi/sense_codes.h
717
SENSE_CODE(0x5D53, "Spindle impending failure seek error rate too high")
drivers/scsi/sense_codes.h
718
SENSE_CODE(0x5D54, "Spindle impending failure too many block reassigns")
drivers/scsi/sense_codes.h
719
SENSE_CODE(0x5D55, "Spindle impending failure access times too high")
drivers/scsi/sense_codes.h
72
SENSE_CODE(0x041F, "Logical unit not ready, microcode download required")
drivers/scsi/sense_codes.h
720
SENSE_CODE(0x5D56, "Spindle impending failure start unit times too high")
drivers/scsi/sense_codes.h
721
SENSE_CODE(0x5D57, "Spindle impending failure channel parametrics")
drivers/scsi/sense_codes.h
722
SENSE_CODE(0x5D58, "Spindle impending failure controller detected")
drivers/scsi/sense_codes.h
723
SENSE_CODE(0x5D59, "Spindle impending failure throughput performance")
drivers/scsi/sense_codes.h
724
SENSE_CODE(0x5D5A, "Spindle impending failure seek time performance")
drivers/scsi/sense_codes.h
725
SENSE_CODE(0x5D5B, "Spindle impending failure spin-up retry count")
drivers/scsi/sense_codes.h
726
SENSE_CODE(0x5D5C, "Spindle impending failure drive calibration retry count")
drivers/scsi/sense_codes.h
727
SENSE_CODE(0x5D60, "Firmware impending failure general hard drive failure")
drivers/scsi/sense_codes.h
728
SENSE_CODE(0x5D61, "Firmware impending failure drive error rate too high")
drivers/scsi/sense_codes.h
729
SENSE_CODE(0x5D62, "Firmware impending failure data error rate too high")
drivers/scsi/sense_codes.h
73
SENSE_CODE(0x0420, "Logical unit not ready, logical unit reset required")
drivers/scsi/sense_codes.h
730
SENSE_CODE(0x5D63, "Firmware impending failure seek error rate too high")
drivers/scsi/sense_codes.h
731
SENSE_CODE(0x5D64, "Firmware impending failure too many block reassigns")
drivers/scsi/sense_codes.h
732
SENSE_CODE(0x5D65, "Firmware impending failure access times too high")
drivers/scsi/sense_codes.h
733
SENSE_CODE(0x5D66, "Firmware impending failure start unit times too high")
drivers/scsi/sense_codes.h
734
SENSE_CODE(0x5D67, "Firmware impending failure channel parametrics")
drivers/scsi/sense_codes.h
735
SENSE_CODE(0x5D68, "Firmware impending failure controller detected")
drivers/scsi/sense_codes.h
736
SENSE_CODE(0x5D69, "Firmware impending failure throughput performance")
drivers/scsi/sense_codes.h
737
SENSE_CODE(0x5D6A, "Firmware impending failure seek time performance")
drivers/scsi/sense_codes.h
738
SENSE_CODE(0x5D6B, "Firmware impending failure spin-up retry count")
drivers/scsi/sense_codes.h
739
SENSE_CODE(0x5D6C, "Firmware impending failure drive calibration retry count")
drivers/scsi/sense_codes.h
74
SENSE_CODE(0x0421, "Logical unit not ready, hard reset required")
drivers/scsi/sense_codes.h
740
SENSE_CODE(0x5D73, "Media impending failure endurance limit met")
drivers/scsi/sense_codes.h
741
SENSE_CODE(0x5DFF, "Failure prediction threshold exceeded (false)")
drivers/scsi/sense_codes.h
743
SENSE_CODE(0x5E00, "Low power condition on")
drivers/scsi/sense_codes.h
744
SENSE_CODE(0x5E01, "Idle condition activated by timer")
drivers/scsi/sense_codes.h
745
SENSE_CODE(0x5E02, "Standby condition activated by timer")
drivers/scsi/sense_codes.h
746
SENSE_CODE(0x5E03, "Idle condition activated by command")
drivers/scsi/sense_codes.h
747
SENSE_CODE(0x5E04, "Standby condition activated by command")
drivers/scsi/sense_codes.h
748
SENSE_CODE(0x5E05, "Idle_b condition activated by timer")
drivers/scsi/sense_codes.h
749
SENSE_CODE(0x5E06, "Idle_b condition activated by command")
drivers/scsi/sense_codes.h
75
SENSE_CODE(0x0422, "Logical unit not ready, power cycle required")
drivers/scsi/sense_codes.h
750
SENSE_CODE(0x5E07, "Idle_c condition activated by timer")
drivers/scsi/sense_codes.h
751
SENSE_CODE(0x5E08, "Idle_c condition activated by command")
drivers/scsi/sense_codes.h
752
SENSE_CODE(0x5E09, "Standby_y condition activated by timer")
drivers/scsi/sense_codes.h
753
SENSE_CODE(0x5E0A, "Standby_y condition activated by command")
drivers/scsi/sense_codes.h
754
SENSE_CODE(0x5E41, "Power state change to active")
drivers/scsi/sense_codes.h
755
SENSE_CODE(0x5E42, "Power state change to idle")
drivers/scsi/sense_codes.h
756
SENSE_CODE(0x5E43, "Power state change to standby")
drivers/scsi/sense_codes.h
757
SENSE_CODE(0x5E45, "Power state change to sleep")
drivers/scsi/sense_codes.h
758
SENSE_CODE(0x5E47, "Power state change to device control")
drivers/scsi/sense_codes.h
76
SENSE_CODE(0x0423, "Logical unit not ready, affiliation required")
drivers/scsi/sense_codes.h
760
SENSE_CODE(0x6000, "Lamp failure")
drivers/scsi/sense_codes.h
762
SENSE_CODE(0x6100, "Video acquisition error")
drivers/scsi/sense_codes.h
763
SENSE_CODE(0x6101, "Unable to acquire video")
drivers/scsi/sense_codes.h
764
SENSE_CODE(0x6102, "Out of focus")
drivers/scsi/sense_codes.h
766
SENSE_CODE(0x6200, "Scan head positioning error")
drivers/scsi/sense_codes.h
768
SENSE_CODE(0x6300, "End of user area encountered on this track")
drivers/scsi/sense_codes.h
769
SENSE_CODE(0x6301, "Packet does not fit in available space")
drivers/scsi/sense_codes.h
77
SENSE_CODE(0x0424, "Depopulation in progress")
drivers/scsi/sense_codes.h
771
SENSE_CODE(0x6400, "Illegal mode for this track")
drivers/scsi/sense_codes.h
772
SENSE_CODE(0x6401, "Invalid packet size")
drivers/scsi/sense_codes.h
774
SENSE_CODE(0x6500, "Voltage fault")
drivers/scsi/sense_codes.h
776
SENSE_CODE(0x6600, "Automatic document feeder cover up")
drivers/scsi/sense_codes.h
777
SENSE_CODE(0x6601, "Automatic document feeder lift up")
drivers/scsi/sense_codes.h
778
SENSE_CODE(0x6602, "Document jam in automatic document feeder")
drivers/scsi/sense_codes.h
779
SENSE_CODE(0x6603, "Document miss feed automatic in document feeder")
drivers/scsi/sense_codes.h
78
SENSE_CODE(0x0425, "Depopulation restoration in progress")
drivers/scsi/sense_codes.h
781
SENSE_CODE(0x6700, "Configuration failure")
drivers/scsi/sense_codes.h
782
SENSE_CODE(0x6701, "Configuration of incapable logical units failed")
drivers/scsi/sense_codes.h
783
SENSE_CODE(0x6702, "Add logical unit failed")
drivers/scsi/sense_codes.h
784
SENSE_CODE(0x6703, "Modification of logical unit failed")
drivers/scsi/sense_codes.h
785
SENSE_CODE(0x6704, "Exchange of logical unit failed")
drivers/scsi/sense_codes.h
786
SENSE_CODE(0x6705, "Remove of logical unit failed")
drivers/scsi/sense_codes.h
787
SENSE_CODE(0x6706, "Attachment of logical unit failed")
drivers/scsi/sense_codes.h
788
SENSE_CODE(0x6707, "Creation of logical unit failed")
drivers/scsi/sense_codes.h
789
SENSE_CODE(0x6708, "Assign failure occurred")
drivers/scsi/sense_codes.h
790
SENSE_CODE(0x6709, "Multiply assigned logical unit")
drivers/scsi/sense_codes.h
791
SENSE_CODE(0x670A, "Set target port groups command failed")
drivers/scsi/sense_codes.h
792
SENSE_CODE(0x670B, "ATA device feature not enabled")
drivers/scsi/sense_codes.h
793
SENSE_CODE(0x670C, "Command rejected")
drivers/scsi/sense_codes.h
794
SENSE_CODE(0x670D, "Explicit bind not allowed")
drivers/scsi/sense_codes.h
796
SENSE_CODE(0x6800, "Logical unit not configured")
drivers/scsi/sense_codes.h
797
SENSE_CODE(0x6801, "Subsidiary logical unit not configured")
drivers/scsi/sense_codes.h
799
SENSE_CODE(0x6900, "Data loss on logical unit")
drivers/scsi/sense_codes.h
8
SENSE_CODE(0x0001, "Filemark detected")
drivers/scsi/sense_codes.h
80
SENSE_CODE(0x0500, "Logical unit does not respond to selection")
drivers/scsi/sense_codes.h
800
SENSE_CODE(0x6901, "Multiple logical unit failures")
drivers/scsi/sense_codes.h
801
SENSE_CODE(0x6902, "Parity/data mismatch")
drivers/scsi/sense_codes.h
803
SENSE_CODE(0x6A00, "Informational, refer to log")
drivers/scsi/sense_codes.h
805
SENSE_CODE(0x6B00, "State change has occurred")
drivers/scsi/sense_codes.h
806
SENSE_CODE(0x6B01, "Redundancy level got better")
drivers/scsi/sense_codes.h
807
SENSE_CODE(0x6B02, "Redundancy level got worse")
drivers/scsi/sense_codes.h
809
SENSE_CODE(0x6C00, "Rebuild failure occurred")
drivers/scsi/sense_codes.h
811
SENSE_CODE(0x6D00, "Recalculate failure occurred")
drivers/scsi/sense_codes.h
813
SENSE_CODE(0x6E00, "Command to logical unit failed")
drivers/scsi/sense_codes.h
815
SENSE_CODE(0x6F00, "Copy protection key exchange failure - authentication failure")
drivers/scsi/sense_codes.h
816
SENSE_CODE(0x6F01, "Copy protection key exchange failure - key not present")
drivers/scsi/sense_codes.h
817
SENSE_CODE(0x6F02, "Copy protection key exchange failure - key not established")
drivers/scsi/sense_codes.h
818
SENSE_CODE(0x6F03, "Read of scrambled sector without authentication")
drivers/scsi/sense_codes.h
819
SENSE_CODE(0x6F04, "Media region code is mismatched to logical unit region")
drivers/scsi/sense_codes.h
82
SENSE_CODE(0x0600, "No reference position found")
drivers/scsi/sense_codes.h
820
SENSE_CODE(0x6F05, "Drive region must be permanent/region reset count error")
drivers/scsi/sense_codes.h
821
SENSE_CODE(0x6F06, "Insufficient block count for binding nonce recording")
drivers/scsi/sense_codes.h
822
SENSE_CODE(0x6F07, "Conflict in binding nonce recording")
drivers/scsi/sense_codes.h
823
SENSE_CODE(0x6F08, "Insufficient permission")
drivers/scsi/sense_codes.h
824
SENSE_CODE(0x6F09, "Invalid drive-host pairing server")
drivers/scsi/sense_codes.h
825
SENSE_CODE(0x6F0A, "Drive-host pairing suspended")
drivers/scsi/sense_codes.h
830
SENSE_CODE(0x7100, "Decompression exception long algorithm id")
drivers/scsi/sense_codes.h
832
SENSE_CODE(0x7200, "Session fixation error")
drivers/scsi/sense_codes.h
833
SENSE_CODE(0x7201, "Session fixation error writing lead-in")
drivers/scsi/sense_codes.h
834
SENSE_CODE(0x7202, "Session fixation error writing lead-out")
drivers/scsi/sense_codes.h
835
SENSE_CODE(0x7203, "Session fixation error - incomplete track in session")
drivers/scsi/sense_codes.h
836
SENSE_CODE(0x7204, "Empty or partially written reserved track")
drivers/scsi/sense_codes.h
837
SENSE_CODE(0x7205, "No more track reservations allowed")
drivers/scsi/sense_codes.h
838
SENSE_CODE(0x7206, "RMZ extension is not allowed")
drivers/scsi/sense_codes.h
839
SENSE_CODE(0x7207, "No more test zone extensions are allowed")
drivers/scsi/sense_codes.h
84
SENSE_CODE(0x0700, "Multiple peripheral devices selected")
drivers/scsi/sense_codes.h
841
SENSE_CODE(0x7300, "Cd control error")
drivers/scsi/sense_codes.h
842
SENSE_CODE(0x7301, "Power calibration area almost full")
drivers/scsi/sense_codes.h
843
SENSE_CODE(0x7302, "Power calibration area is full")
drivers/scsi/sense_codes.h
844
SENSE_CODE(0x7303, "Power calibration area error")
drivers/scsi/sense_codes.h
845
SENSE_CODE(0x7304, "Program memory area update failure")
drivers/scsi/sense_codes.h
846
SENSE_CODE(0x7305, "Program memory area is full")
drivers/scsi/sense_codes.h
847
SENSE_CODE(0x7306, "RMA/PMA is almost full")
drivers/scsi/sense_codes.h
848
SENSE_CODE(0x7310, "Current power calibration area almost full")
drivers/scsi/sense_codes.h
849
SENSE_CODE(0x7311, "Current power calibration area is full")
drivers/scsi/sense_codes.h
850
SENSE_CODE(0x7317, "RDZ is full")
drivers/scsi/sense_codes.h
852
SENSE_CODE(0x7400, "Security error")
drivers/scsi/sense_codes.h
853
SENSE_CODE(0x7401, "Unable to decrypt data")
drivers/scsi/sense_codes.h
854
SENSE_CODE(0x7402, "Unencrypted data encountered while decrypting")
drivers/scsi/sense_codes.h
855
SENSE_CODE(0x7403, "Incorrect data encryption key")
drivers/scsi/sense_codes.h
856
SENSE_CODE(0x7404, "Cryptographic integrity validation failed")
drivers/scsi/sense_codes.h
857
SENSE_CODE(0x7405, "Error decrypting data")
drivers/scsi/sense_codes.h
858
SENSE_CODE(0x7406, "Unknown signature verification key")
drivers/scsi/sense_codes.h
859
SENSE_CODE(0x7407, "Encryption parameters not useable")
drivers/scsi/sense_codes.h
86
SENSE_CODE(0x0800, "Logical unit communication failure")
drivers/scsi/sense_codes.h
860
SENSE_CODE(0x7408, "Digital signature validation failure")
drivers/scsi/sense_codes.h
861
SENSE_CODE(0x7409, "Encryption mode mismatch on read")
drivers/scsi/sense_codes.h
862
SENSE_CODE(0x740A, "Encrypted block not raw read enabled")
drivers/scsi/sense_codes.h
863
SENSE_CODE(0x740B, "Incorrect Encryption parameters")
drivers/scsi/sense_codes.h
864
SENSE_CODE(0x740C, "Unable to decrypt parameter list")
drivers/scsi/sense_codes.h
865
SENSE_CODE(0x740D, "Encryption algorithm disabled")
drivers/scsi/sense_codes.h
866
SENSE_CODE(0x7410, "SA creation parameter value invalid")
drivers/scsi/sense_codes.h
867
SENSE_CODE(0x7411, "SA creation parameter value rejected")
drivers/scsi/sense_codes.h
868
SENSE_CODE(0x7412, "Invalid SA usage")
drivers/scsi/sense_codes.h
869
SENSE_CODE(0x7421, "Data Encryption configuration prevented")
drivers/scsi/sense_codes.h
87
SENSE_CODE(0x0801, "Logical unit communication time-out")
drivers/scsi/sense_codes.h
870
SENSE_CODE(0x7430, "SA creation parameter not supported")
drivers/scsi/sense_codes.h
871
SENSE_CODE(0x7440, "Authentication failed")
drivers/scsi/sense_codes.h
872
SENSE_CODE(0x7461, "External data encryption key manager access error")
drivers/scsi/sense_codes.h
873
SENSE_CODE(0x7462, "External data encryption key manager error")
drivers/scsi/sense_codes.h
874
SENSE_CODE(0x7463, "External data encryption key not found")
drivers/scsi/sense_codes.h
875
SENSE_CODE(0x7464, "External data encryption request not authorized")
drivers/scsi/sense_codes.h
876
SENSE_CODE(0x746E, "External data encryption control timeout")
drivers/scsi/sense_codes.h
877
SENSE_CODE(0x746F, "External data encryption control error")
drivers/scsi/sense_codes.h
878
SENSE_CODE(0x7471, "Logical unit access not authorized")
drivers/scsi/sense_codes.h
879
SENSE_CODE(0x7479, "Security conflict in translated device")
drivers/scsi/sense_codes.h
88
SENSE_CODE(0x0802, "Logical unit communication parity error")
drivers/scsi/sense_codes.h
89
SENSE_CODE(0x0803, "Logical unit communication CRC error (Ultra-DMA/32)")
drivers/scsi/sense_codes.h
9
SENSE_CODE(0x0002, "End-of-partition/medium detected")
drivers/scsi/sense_codes.h
90
SENSE_CODE(0x0804, "Unreachable copy target")
drivers/scsi/sense_codes.h
92
SENSE_CODE(0x0900, "Track following error")
drivers/scsi/sense_codes.h
93
SENSE_CODE(0x0901, "Tracking servo failure")
drivers/scsi/sense_codes.h
94
SENSE_CODE(0x0902, "Focus servo failure")
drivers/scsi/sense_codes.h
95
SENSE_CODE(0x0903, "Spindle servo failure")
drivers/scsi/sense_codes.h
96
SENSE_CODE(0x0904, "Head select fault")
drivers/scsi/sense_codes.h
97
SENSE_CODE(0x0905, "Vibration induced tracking error")
drivers/scsi/sense_codes.h
99
SENSE_CODE(0x0A00, "Error log overflow")
