NETIF_MSG_LINK

drivers/net/ethernet/actions/owl-emac.c

23

NETIF_MSG_LINK)

drivers/net/ethernet/aeroflex/greth.c

48

NETIF_MSG_LINK | \

drivers/net/ethernet/altera/altera_tse_main.c

55

NETIF_MSG_LINK | NETIF_MSG_IFUP |

drivers/net/ethernet/amd/au1000_eth.c

63

NETIF_MSG_LINK)

drivers/net/ethernet/amd/pcnet32.c

3000

#define PCNET32_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)

drivers/net/ethernet/amd/xgbe/xgbe-main.c

27

static const u32 default_msg_level = (NETIF_MSG_LINK | NETIF_MSG_IFDOWN |

drivers/net/ethernet/aquantia/atlantic/aq_nic.c

383

self->msg_enable = NETIF_MSG_DRV | NETIF_MSG_LINK;

drivers/net/ethernet/asix/ax88796c_main.c

29

NETIF_MSG_LINK |

drivers/net/ethernet/atheros/ag71xx.c

231

| NETIF_MSG_LINK \

drivers/net/ethernet/atheros/alx/main.c

1770

alx->msg_enable = NETIF_MSG_LINK | NETIF_MSG_HW | NETIF_MSG_IFUP |

drivers/net/ethernet/atheros/atl1c/atl1c_main.c

87

NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;

drivers/net/ethernet/atheros/atlx/atl1.c

227

NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;

drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c

1244

NETIF_MSG_LINK);

drivers/net/ethernet/broadcom/b44.c

49

NETIF_MSG_LINK | \

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

2445

DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

131

DP(NETIF_MSG_LINK, "local_mib.error %x\n", error);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

134

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

137

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

141

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10027

DP(NETIF_MSG_LINK, "FW cmd failed.\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10068

DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10102

DP(NETIF_MSG_LINK, "FW cmd failed.\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10168

DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data[1]);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10238

DP(NETIF_MSG_LINK, "84833 hw reset on pin values 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10250

DP(NETIF_MSG_LINK, "Don't Advertise 10GBase-T EEE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10256

DP(NETIF_MSG_LINK, "EEE disable failed.\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10274

DP(NETIF_MSG_LINK, "EEE enable failed.\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10380

DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10395

DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10427

DP(NETIF_MSG_LINK, "Failed to configure EEE timers\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10440

DP(NETIF_MSG_LINK, "Failed to set EEE advertisement\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10498

DP(NETIF_MSG_LINK, "BCM848xx: PMD_SIGNAL 1.a811 = 0x%x\n", val2);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10520

DP(NETIF_MSG_LINK, "Legacy speed status = 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10541

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1055

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10563

DP(NETIF_MSG_LINK, "BCM848x3: link speed is %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10688

DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", port);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1069

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10738

DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE FRONT PANEL OFF\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10809

DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", port);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10897

DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", port);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

10911

DP(NETIF_MSG_LINK, "Setting LINK_SIGNAL\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1098

DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_set_pri_cli_reg not all "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11045

DP(NETIF_MSG_LINK, "54618SE cfg init\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11125

DP(NETIF_MSG_LINK, "Advertising 1G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11142

DP(NETIF_MSG_LINK, "Advertising 10M-HD\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11148

DP(NETIF_MSG_LINK, "Advertising 10M-FD\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11154

DP(NETIF_MSG_LINK, "Advertising 100M-HD\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11160

DP(NETIF_MSG_LINK, "Advertising 100M-FD\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11171

DP(NETIF_MSG_LINK, "Setting 100M force\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11178

DP(NETIF_MSG_LINK, "Setting 10M force\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11193

DP(NETIF_MSG_LINK, "Failed to configure EEE timers\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11207

DP(NETIF_MSG_LINK, "Don't Advertise 1GBase-T EEE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11219

DP(NETIF_MSG_LINK, "Enabling Auto-GrEEEn\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11222

DP(NETIF_MSG_LINK, "Don't Adv. EEE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11255

DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11315

DP(NETIF_MSG_LINK, "54618SE read_status: 0x%x\n", legacy_status);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11349

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11368

DP(NETIF_MSG_LINK, "BCM54618SE: link speed is %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11416

DP(NETIF_MSG_LINK, "2PMA/PMD ext_phy_loopback: 54618se\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1146

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11467

DP(NETIF_MSG_LINK, "Setting the SFX7101 LASI indication\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11478

DP(NETIF_MSG_LINK, "Setting the SFX7101 LED to blink on traffic\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11511

DP(NETIF_MSG_LINK, "10G-base-T LASI status 0x%x->0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11517

DP(NETIF_MSG_LINK, "10G-base-T PMA status 0x%x->0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1152

DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config the number of COS "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

11527

DP(NETIF_MSG_LINK, "SFX7101 AN status 0x%x->Master=%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1164

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1198

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1203

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1214

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12199

DP(NETIF_MSG_LINK, "Invalid phy_index %d\n", phy_index);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12217

DP(NETIF_MSG_LINK, ":chip_id = 0x%x\n", chip_id);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1225

DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config SP failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12294

DP(NETIF_MSG_LINK, "Unknown WC interface type 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12322

DP(NETIF_MSG_LINK, "Invalid switch_cfg\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12335

DP(NETIF_MSG_LINK, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1234

DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12463

DP(NETIF_MSG_LINK, "phy_type 0x%x port %d found in index %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12465

DP(NETIF_MSG_LINK, " addr=0x%x, mdio_ctl=0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12505

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12595

DP(NETIF_MSG_LINK, "Begin phy probe\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12608

DP(NETIF_MSG_LINK, "phy_config_swapped %x, phy_index %x,"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12616

DP(NETIF_MSG_LINK, "phy probe failed in phy index %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12658

DP(NETIF_MSG_LINK, "End phy probe. #phys found %x\n", params->num_phys);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1283

DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12831

DP(NETIF_MSG_LINK, "Calling PHY specific func\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1288

DP(NETIF_MSG_LINK, "Total BW can't be zero\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12951

DP(NETIF_MSG_LINK, "Phy Initialization started\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12952

DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12954

DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12956

DP(NETIF_MSG_LINK, "req_adv_flow_ctrl 0x%x\n", params->req_fc_auto_adv);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12974

DP(NETIF_MSG_LINK, "Link Flap Avoidance in progress\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12978

DP(NETIF_MSG_LINK, "Cannot avoid link flap lfa_sta=0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

12995

DP(NETIF_MSG_LINK, "No phy found for initialization !!\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13000

DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13041

DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1312

DP(NETIF_MSG_LINK, "ETS enabled strict configuration\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13215

DP(NETIF_MSG_LINK, "populate_phy failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13258

DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13340

DP(NETIF_MSG_LINK, "populate phy failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13456

DP(NETIF_MSG_LINK, "populate phy failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13488

DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13513

DP(NETIF_MSG_LINK, "84833 reset pulse on pin values 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13560

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13583

DP(NETIF_MSG_LINK, "Begin common phy init\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13594

DP(NETIF_MSG_LINK, "Not doing common init; phy ver is 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13665

DP(NETIF_MSG_LINK, "Analyze Remote Fault\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13668

DP(NETIF_MSG_LINK, "Analyze TX Fault\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13671

DP(NETIF_MSG_LINK, "Analyze UNKNOWN\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13673

DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13799

DP(NETIF_MSG_LINK, "Failed to read pin 0x%02x\n", cfg_pin);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13821

DP(NETIF_MSG_LINK, "Change TX_Fault LED: ->%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13832

DP(NETIF_MSG_LINK, "KR2 recovery\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13859

DP(NETIF_MSG_LINK, "No sigdet\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13877

DP(NETIF_MSG_LINK, "No BP\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13893

DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13902

DP(NETIF_MSG_LINK, "BP=0x%x, NP=0x%x\n", base_page, next_page);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13919

DP(NETIF_MSG_LINK, "Fault detection failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

13967

DP(NETIF_MSG_LINK, "populate phy failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

14019

DP(NETIF_MSG_LINK, "populate phy failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

14048

DP(NETIF_MSG_LINK, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1437

DP(NETIF_MSG_LINK, "Changing emac_mode from 0x%x to 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1491

DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1493

DP(NETIF_MSG_LINK, "EMAC timeout!\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1559

DP(NETIF_MSG_LINK, "enabling UMAC\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1582

DP(NETIF_MSG_LINK, "Invalid speed for UMAC %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1600

DP(NETIF_MSG_LINK, "configured UMAC for EEE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1661

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1674

DP(NETIF_MSG_LINK, "Init XMAC to 2 ports x 10G per path\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1685

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1690

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1724

DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1739

DP(NETIF_MSG_LINK, "enabling XMAC\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1776

DP(NETIF_MSG_LINK, "Setting XMAC for EEE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1812

DP(NETIF_MSG_LINK, "enabling EMAC\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1827

DP(NETIF_MSG_LINK, "XGXS\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1834

DP(NETIF_MSG_LINK, "SerDes\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

1880

DP(NETIF_MSG_LINK, "PFC is enabled\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2000

DP(NETIF_MSG_LINK, "PFC is enabled\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2014

DP(NETIF_MSG_LINK, "PFC is disabled\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2040

DP(NETIF_MSG_LINK, "enable bmac loopback\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2130

DP(NETIF_MSG_LINK, "updating pfc nig parameters\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2239

DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2249

DP(NETIF_MSG_LINK, "About to update PFC in EMAC\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2279

DP(NETIF_MSG_LINK, "Enabling BigMAC1\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2300

DP(NETIF_MSG_LINK, "enable bmac loopback\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2342

DP(NETIF_MSG_LINK, "Enabling BigMAC2\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2482

DP(NETIF_MSG_LINK, "init_crd 0x%x crd 0x%x\n", init_crd, crd);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2491

DP(NETIF_MSG_LINK, "BUG! init_crd 0x%x != crd 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2519

DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2525

DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

261

DP(NETIF_MSG_LINK, "No LFA due to DCC flap after clp exit\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2616

DP(NETIF_MSG_LINK, "write phy register failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2653

DP(NETIF_MSG_LINK, "read phy register failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2697

DP(NETIF_MSG_LINK, "read phy register failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2719

DP(NETIF_MSG_LINK, "read phy register failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2773

DP(NETIF_MSG_LINK, "write phy register failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2794

DP(NETIF_MSG_LINK, "write phy register failed\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2913

DP(NETIF_MSG_LINK, "Error: Tx LPI is enabled with timer 0\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2978

DP(NETIF_MSG_LINK, "Advertise 10GBase-T EEE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

2982

DP(NETIF_MSG_LINK, "Advertise 1GBase-T EEE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

302

DP(NETIF_MSG_LINK, "Duplex mismatch %x vs. %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3021

DP(NETIF_MSG_LINK, "EEE negotiated - 100M\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3029

DP(NETIF_MSG_LINK, "EEE negotiated - 1G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3037

DP(NETIF_MSG_LINK, "EEE negotiated - 10G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3045

DP(NETIF_MSG_LINK, "EEE is active\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3075

DP(NETIF_MSG_LINK, "Setting BSC switch\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3093

DP(NETIF_MSG_LINK, "invalid xfer_cnt %d. Max is 16 bytes\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

311

DP(NETIF_MSG_LINK, "Flow control mismatch %x vs. %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3123

DP(NETIF_MSG_LINK, "wr 0 byte timed out after %Lu ns\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3148

DP(NETIF_MSG_LINK, "rd op timed out after %Lu ns\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

320

DP(NETIF_MSG_LINK, "Link speed mismatch %x vs. %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

331

DP(NETIF_MSG_LINK, "Speed Cap mismatch %x vs. %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3330

DP(NETIF_MSG_LINK, "bnx2x_serdes_deassert\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3365

DP(NETIF_MSG_LINK, "bnx2x_xgxs_deassert\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3416

DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

344

DP(NETIF_MSG_LINK, "Flow Ctrl AN mismatch %x vs. %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3452

DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x,"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3483

DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3496

DP(NETIF_MSG_LINK, "Flow Control: TX only\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3501

DP(NETIF_MSG_LINK, "Flow Control: RX only\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3514

DP(NETIF_MSG_LINK, "Flow Control: RX & TX\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3517

DP(NETIF_MSG_LINK, "Flow Control: RX only\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3523

DP(NETIF_MSG_LINK, "Flow Control: None\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

357

DP(NETIF_MSG_LINK, "EEE mismatch %x vs. %x\n", params->eee_mode,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3584

DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", pause_result);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3653

DP(NETIF_MSG_LINK, "Enabling 20G-KR2\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3691

DP(NETIF_MSG_LINK, "Disabling 20G-KR2\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3707

DP(NETIF_MSG_LINK, "Configure WC for LPI pass through\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

374

DP(NETIF_MSG_LINK, "Invalid EPIO pin %d to get\n", epio_pin);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3745

DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3767

DP(NETIF_MSG_LINK, "Advertize 1G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3781

DP(NETIF_MSG_LINK, "Advertize 10G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

3819

DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

391

DP(NETIF_MSG_LINK, "Invalid EPIO pin %d to set\n", epio_pin);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

394

DP(NETIF_MSG_LINK, "Setting EPIO pin %d to %d\n", epio_pin, en);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4211

DP(NETIF_MSG_LINK, "set SGMII AUTONEG\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4226

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4237

DP(NETIF_MSG_LINK, "set SGMII force speed %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4241

DP(NETIF_MSG_LINK, " (readback) %x\n", val16);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4351

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4440

DP(NETIF_MSG_LINK, "0x%x retry left\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

445

DP(NETIF_MSG_LINK, "ETS E2E3 disabled configuration\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4461

DP(NETIF_MSG_LINK, "Setting 10G SFI\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4464

DP(NETIF_MSG_LINK, "Setting 1G Fiber\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4482

DP(NETIF_MSG_LINK, "Setting WC TX to %d\n", tx_en);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4502

DP(NETIF_MSG_LINK, "Begin Warpcore init, link_speed %d, "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4513

DP(NETIF_MSG_LINK, "Setting SGMII mode\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4523

DP(NETIF_MSG_LINK, "Setting KR 10G-Force\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4531

DP(NETIF_MSG_LINK, "Setting 10G XFI\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4535

DP(NETIF_MSG_LINK, "1G Fiber\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4538

DP(NETIF_MSG_LINK, "10/100/1G SGMII\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4568

DP(NETIF_MSG_LINK, "Speed not supported yet\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4571

DP(NETIF_MSG_LINK, "Setting 20G DXGXS\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4581

DP(NETIF_MSG_LINK, "Setting KR 20G-Force\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4586

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4595

DP(NETIF_MSG_LINK, "Exit config init\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4659

DP(NETIF_MSG_LINK, "Setting Warpcore loopback type %x, speed %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4707

DP(NETIF_MSG_LINK, "phy link up\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4787

DP(NETIF_MSG_LINK, "phy link down\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4844

DP(NETIF_MSG_LINK, "media_types = 0x%x\n", media_types);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4865

DP(NETIF_MSG_LINK, "link_status 0x%x phy_link_up %x int_mask 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4867

DP(NETIF_MSG_LINK, "line_speed %x duplex %x flow_ctrl 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4931

DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

4991

DP(NETIF_MSG_LINK, "phy->speed_cap_mask = 0x%x, control2 = 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5001

DP(NETIF_MSG_LINK, "XGXS\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5162

DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5232

DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5253

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5315

DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5353

DP(NETIF_MSG_LINK, "1G parallel detect link on port %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5364

DP(NETIF_MSG_LINK, "10G parallel detect link on port %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5398

DP(NETIF_MSG_LINK, "pause_result CL73 0x%x\n", pause_result);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5412

DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n", pause_result);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5443

DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5451

DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5459

DP(NETIF_MSG_LINK, "Signal is not detected. Restoring CL73."

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5477

DP(NETIF_MSG_LINK, "CL73 state-machine is not stable. "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5493

DP(NETIF_MSG_LINK, "No CL37 FSM were received. "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5511

DP(NETIF_MSG_LINK, "Disabling CL73, and restarting CL37 autoneg\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5538

DP(NETIF_MSG_LINK, "phy link up\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5579

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5599

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5605

DP(NETIF_MSG_LINK, "phy link down\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5613

DP(NETIF_MSG_LINK, " phy_link_up %x line_speed %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5637

DP(NETIF_MSG_LINK, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5687

DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5716

DP(NETIF_MSG_LINK, "PCS RX link status = 0x%x-->0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5725

DP(NETIF_MSG_LINK, "0x81d1 = 0x%x\n", gp_status1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5798

DP(NETIF_MSG_LINK, "lane %d gp_speed 0x%x\n", lane, gp_speed);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5813

DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5863

DP(NETIF_MSG_LINK, "setting link speed & duplex\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5888

DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5944

DP(NETIF_MSG_LINK, "not SGMII, no AN\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5953

DP(NETIF_MSG_LINK, "not SGMII, AN\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

5970

DP(NETIF_MSG_LINK, "SGMII\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6038

DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n", ctrl, cnt);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6056

DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6061

DP(NETIF_MSG_LINK, "enabled external phy int\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6066

DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6071

DP(NETIF_MSG_LINK, "enabled external phy int\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6078

DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6081

DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6085

DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6102

DP(NETIF_MSG_LINK, "latch_status = 0x%x\n", latch_status);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6156

DP(NETIF_MSG_LINK, "Ack link up interrupt with mask 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6252

DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6285

DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6308

DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6309

DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6436

DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6587

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6630

DP(NETIF_MSG_LINK, "reset external PHY\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6639

DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6703

DP(NETIF_MSG_LINK, "Found errors on XMAC\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6715

DP(NETIF_MSG_LINK, "Enabling LPI assertion\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6728

DP(NETIF_MSG_LINK, "Found errors on BMAC\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6831

DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6837

DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6842

DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6866

DP(NETIF_MSG_LINK, "phy in index %d link is up\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6869

DP(NETIF_MSG_LINK, "phy in index %d link is down\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6903

DP(NETIF_MSG_LINK, "Invalid link indication"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6941

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6959

DP(NETIF_MSG_LINK, "Active external phy selected: %x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6973

DP(NETIF_MSG_LINK, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x,"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

6984

DP(NETIF_MSG_LINK, "Internal link speed %d is"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7009

DP(NETIF_MSG_LINK, "ext_phy_link_up = %d, int_link_up = %d,"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7073

DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x for port %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7143

DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7191

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7217

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7282

DP(NETIF_MSG_LINK, "XAUI work-around not required\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7285

DP(NETIF_MSG_LINK, "bit 15 went off\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7296

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7306

DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7350

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7381

DP(NETIF_MSG_LINK, "Init 8073\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7403

DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7408

DP(NETIF_MSG_LINK, "Swapping polarity for the 8073\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7432

DP(NETIF_MSG_LINK, "Enable CL37 BAM on KR\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7436

DP(NETIF_MSG_LINK, "Forced speed 10G on 807X\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7463

DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7477

DP(NETIF_MSG_LINK, "Add 2.5G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7483

DP(NETIF_MSG_LINK, "Disable 2.5G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

750

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7517

DP(NETIF_MSG_LINK, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7534

DP(NETIF_MSG_LINK, "8703 LASI status 0x%x\n", val1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7541

DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n", val2, val1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7550

DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7555

DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7562

DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7579

DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x,"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7605

DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7610

DP(NETIF_MSG_LINK, "port %x: External link up in 2.5G\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7615

DP(NETIF_MSG_LINK, "port %x: External link up in 1G\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7619

DP(NETIF_MSG_LINK, "port %x: External link is down\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7635

DP(NETIF_MSG_LINK, "Swapping 1G polarity for"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7675

DP(NETIF_MSG_LINK, "Setting 8073 port %d into low power mode\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7690

DP(NETIF_MSG_LINK, "init 8705\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7718

DP(NETIF_MSG_LINK, "read status 8705\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7721

DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7725

DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7735

DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7758

DP(NETIF_MSG_LINK, "Disabling PMD transmitter\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7760

DP(NETIF_MSG_LINK, "NOT disabling PMD transmitter\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7764

DP(NETIF_MSG_LINK, "Enabling PMD transmitter\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

778

DP(NETIF_MSG_LINK, "bnx2x_ets_disabled - chip not supported\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7798

DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7836

DP(NETIF_MSG_LINK, "Invalid TX_LASER_MDIO 0x%x\n", tx_en_mode);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7846

DP(NETIF_MSG_LINK, "Setting SFP+ transmitter to %d\n", tx_en);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7862

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7894

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7934

DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7954

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

7991

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8051

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8088

DP(NETIF_MSG_LINK, "invalid dev_addr 0x%x\n", dev_addr);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8135

DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8154

DP(NETIF_MSG_LINK, "Active Copper cable detected\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8167

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8170

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8185

DP(NETIF_MSG_LINK, "1G SFP module detected\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8206

DP(NETIF_MSG_LINK, "10G Optic module detected\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8218

DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8246

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8255

DP(NETIF_MSG_LINK, "EDC mode is set to 0x%x\n", *edc_mode);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8275

DP(NETIF_MSG_LINK, "NOT enforcing module verification\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8287

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8294

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8302

DP(NETIF_MSG_LINK, "Approved module\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8357

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8411

DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8415

DP(NETIF_MSG_LINK, "Setting LIMITING MODE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8422

DP(NETIF_MSG_LINK, "Setting LRM MODE\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8524

DP(NETIF_MSG_LINK, "Function 0x%x not supported by 8727\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8550

DP(NETIF_MSG_LINK, "Set fault module-detected led "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8557

DP(NETIF_MSG_LINK, "Error: Invalid fault led mode 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8573

DP(NETIF_MSG_LINK, "Setting Fault LED to %d using pin cfg %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8582

DP(NETIF_MSG_LINK, "Setting SFP+ module fault LED to %d\n", gpio_mode);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8611

DP(NETIF_MSG_LINK, "Setting SFP+ power to %x\n", power);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8695

DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8700

DP(NETIF_MSG_LINK, "Failed to get valid module type\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8704

DP(NETIF_MSG_LINK, "Module verification failed!!\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8713

DP(NETIF_MSG_LINK, "Shutdown SFP+ module!!\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8754

DP(NETIF_MSG_LINK, "Failed to get MOD_ABS interrupt config\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8794

DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8840

DP(NETIF_MSG_LINK, "XGXS 8706/8726\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8853

DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x--> 0x%x\n", val1, val2);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8864

DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8918

DP(NETIF_MSG_LINK, "XGXS 8706 is initialized after %d ms\n", cnt);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8932

DP(NETIF_MSG_LINK, "Setting RX Equalizer to BCM8706"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8939

DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8954

DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

8990

DP(NETIF_MSG_LINK, "Enabling TXONOFF_PWRDN_DIS\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9013

DP(NETIF_MSG_LINK, "PMA/PMD ext_phy_loopback: 8726\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9067

DP(NETIF_MSG_LINK, "Tx is disabled\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

907

DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9081

DP(NETIF_MSG_LINK, "Initializing BCM8726\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9096

DP(NETIF_MSG_LINK, "Setting 1G force\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9112

DP(NETIF_MSG_LINK, "Setting 1G clause37\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9142

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9162

DP(NETIF_MSG_LINK, "bnx2x_8726_link_reset port %d\n", params->port);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

923

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9242

DP(NETIF_MSG_LINK, "Setting 1G force\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9249

DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9269

DP(NETIF_MSG_LINK, "Setting 1G clause37\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

927

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9302

DP(NETIF_MSG_LINK, "Initializing BCM8727\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9337

DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9359

DP(NETIF_MSG_LINK, "Enabling TXONOFF_PWRDN_DIS\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9390

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9416

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9449

DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9455

DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9482

DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n", rx_alarm_status);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9490

DP(NETIF_MSG_LINK, "8727 LASI status 0x%x\n", val1);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9508

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9551

DP(NETIF_MSG_LINK, "Enabling 8727 TX laser\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9554

DP(NETIF_MSG_LINK, "Tx is disabled\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9568

DP(NETIF_MSG_LINK, "port %x: External link up in 10G\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9573

DP(NETIF_MSG_LINK, "port %x: External link up in 1G\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9577

DP(NETIF_MSG_LINK, "port %x: External link is down\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9597

DP(NETIF_MSG_LINK, "duplex = 0x%x\n", vars->duplex);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

963

DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9677

DP(NETIF_MSG_LINK, "Unable to read 848xx "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

969

DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9696

DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw "

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9837

DP(NETIF_MSG_LINK, "Advertising 1G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9853

DP(NETIF_MSG_LINK, "Advertising 100M-FD\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9862

DP(NETIF_MSG_LINK, "Advertising 100M-HD\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9870

DP(NETIF_MSG_LINK, "Advertising 10M-FD\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9878

DP(NETIF_MSG_LINK, "Advertising 10M-HD\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9894

DP(NETIF_MSG_LINK, "Setting 100M force\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9904

DP(NETIF_MSG_LINK, "Setting 10M force\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9927

DP(NETIF_MSG_LINK, "Advertising 10G\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

9992

DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

12773

DP(NETIF_MSG_LINK, "mdio_read: prtad 0x%x, devad 0x%x, addr 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

12782

DP(NETIF_MSG_LINK, "mdio_read_val 0x%x rc = 0x%x\n", value, rc);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

12796

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

12818

DP(NETIF_MSG_LINK, "ioctl: phy id 0x%x, reg 0x%x, val_in 0x%x\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2131

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2140

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2149

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2182

DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output low\n", pins);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2188

DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> output high\n", pins);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2194

DP(NETIF_MSG_LINK, "Set GPIO 0x%x -> input\n", pins);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2234

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2243

DP(NETIF_MSG_LINK,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

2353

DP(NETIF_MSG_IFUP | NETIF_MSG_LINK, "dropless_fc is %s\n",

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

1492

DP(NETIF_MSG_LINK | BNX2X_MSG_IOV,

drivers/net/ethernet/broadcom/genet/bcmgenet.c

120

NETIF_MSG_LINK)

drivers/net/ethernet/broadcom/tg3.c

114

NETIF_MSG_LINK | \

drivers/net/ethernet/cavium/liquidio/lio_main.c

56

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)

drivers/net/ethernet/cavium/liquidio/lio_vf_main.c

40

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)

drivers/net/ethernet/chelsio/cxgb/cxgb2.c

79

#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \

drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c

79

#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c

97

#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \

drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c

68

#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \

drivers/net/ethernet/cortina/gemini.c

49

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)

drivers/net/ethernet/davicom/dm9000.c

1659

db->msg_enable = NETIF_MSG_LINK;

drivers/net/ethernet/dec/tulip/de2104x.c

75

NETIF_MSG_LINK | \

drivers/net/ethernet/engleder/tsnep_main.c

2579

NETIF_MSG_LINK | NETIF_MSG_IFUP |

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

66

NETIF_MSG_LINK | NETIF_MSG_IFUP | \

drivers/net/ethernet/freescale/fec_mpc52xx.c

84

NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP)

drivers/net/ethernet/google/gve/gve_main.c

32

#define DEFAULT_MSG_LEVEL (NETIF_MSG_DRV | NETIF_MSG_LINK)

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c

72

#define DEFAULT_MSG_LEVEL (NETIF_MSG_PROBE | NETIF_MSG_LINK | \

drivers/net/ethernet/ibm/ehea/ehea.h

36

#define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \

drivers/net/ethernet/intel/e1000/e1000_main.c

193

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)

drivers/net/ethernet/intel/e1000e/netdev.c

35

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)

drivers/net/ethernet/intel/i40e/i40e_main.c

15638

NETIF_MSG_LINK);

drivers/net/ethernet/intel/ice/ice.h

123

#define ICE_DFLT_NETIF_M (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)

drivers/net/ethernet/intel/idpf/idpf.h

49

#define IDPF_AVAIL_NETIF_M (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)

drivers/net/ethernet/intel/igb/igb_main.c

207

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)

drivers/net/ethernet/intel/igbvf/netdev.c

33

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)

drivers/net/ethernet/intel/igc/igc_main.c

26

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

170

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

87

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)

drivers/net/ethernet/jme.h

27

NETIF_MSG_LINK | \

drivers/net/ethernet/marvell/skge.c

65

NETIF_MSG_LINK | NETIF_MSG_IFUP |

drivers/net/ethernet/marvell/sky2.c

73

NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK

drivers/net/ethernet/mediatek/mtk_eth_soc.h

43

NETIF_MSG_LINK | \

drivers/net/ethernet/mellanox/mlx4/mlx4_en.h

67

#define MLX4_EN_MSG_LEVEL (NETIF_MSG_LINK | NETIF_MSG_IFDOWN)

drivers/net/ethernet/micrel/ks8851_common.c

1162

NETIF_MSG_LINK);

drivers/net/ethernet/micrel/ksz884x.c

6432

(NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK));

drivers/net/ethernet/microchip/enc28j60.c

36

(NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)

drivers/net/ethernet/microchip/encx24j600.c

26

#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)

drivers/net/ethernet/microchip/lan743x_main.c

3658

NETIF_MSG_LINK | NETIF_MSG_IFUP |

drivers/net/ethernet/myricom/myri10ge/myri10ge.c

326

#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK

drivers/net/ethernet/natsemi/natsemi.c

68

NETIF_MSG_LINK | \

drivers/net/ethernet/nxp/lpc_eth.c

1363

pldat->msg_enable = NETIF_MSG_LINK;

drivers/net/ethernet/pasemi/pasemi_mac.c

53

NETIF_MSG_LINK | \