MYIOC_s_INFO_FMT
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
printk(MYIOC_s_INFO_FMT
printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
dprintk(ioc, printk(MYIOC_s_INFO_FMT
printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
printk(MYIOC_s_INFO_FMT " volume has been created\n",
printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
printk(MYIOC_s_INFO_FMT "%s: host reset in"
printk(MYIOC_s_INFO_FMT "Retry completed "
printk(MYIOC_s_INFO_FMT
printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
printk(MYIOC_s_INFO_FMT
printk(MYIOC_s_INFO_FMT
printk(MYIOC_s_INFO_FMT
printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
printk(MYIOC_s_INFO_FMT "Firmware discovery not"
printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d,"
printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
printk(MYIOC_s_INFO_FMT "%s: host reset in progress!\n",
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, "
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
printk(MYIOC_s_INFO_FMT "Invalid value passed for"
printk(MYIOC_s_INFO_FMT "IOC is in Target mode\n", ioc->name);
printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n",
printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
printk(MYIOC_s_INFO_FMT "attempting lun reset! (sc=%p)\n",
printk (MYIOC_s_INFO_FMT "lun reset: %s (sc=%p)\n",
printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n",
printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n",