KERN_NOTICE - Linux

arch/alpha/kernel/err_common.c

25

char *err_print_prefix = KERN_NOTICE;

arch/alpha/kernel/err_ev6.c

222

err_print_prefix = KERN_NOTICE;

arch/arm/mach-orion5x/pci.c

156

printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "

arch/mips/dec/time.c

108

printk_once(KERN_NOTICE

arch/s390/boot/boot.h

93

#define boot_notice(fmt, ...) boot_printk(KERN_NOTICE boot_fmt(fmt), ##__VA_ARGS__)

arch/sh/boards/mach-sh03/rtc.c

113

printk_once(KERN_NOTICE

arch/sh/drivers/dma/dma-api.c

267

printk(KERN_NOTICE "DMA: Registering DMA API.\n");

arch/sh/drivers/heartbeat.c

149

printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);

arch/sh/drivers/pci/fixups-dreamcast.c

34

printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));

arch/sh/drivers/pci/pci-sh7751.c

81

printk(KERN_NOTICE "PCI: Starting initialization.\n");

arch/sh/drivers/pci/pcie-sh7786.c

434

printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n",

arch/sh/drivers/pci/pcie-sh7786.c

437

printk(KERN_NOTICE "PCI: PCIe#%d link down\n",

arch/sh/drivers/pci/pcie-sh7786.c

551

printk(KERN_NOTICE "PCI: Starting initialization.\n");

arch/sh/drivers/pci/pcie-sh7786.c

591

printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);

arch/sh/drivers/push-switch.c

121

printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);

arch/sh/kernel/cpu/sh4/sq.c

377

printk(KERN_NOTICE "sq: Registering store queue API.\n");

arch/sh/kernel/setup.c

276

printk(KERN_NOTICE "Boot params:\n"

arch/sh/kernel/sh_bios.c

81

printk(KERN_NOTICE "Setting GDB trap vector to %p\n",

arch/sh/kernel/sh_bios.c

84

printk(KERN_NOTICE "SH-BIOS not detected\n");

arch/sh/kernel/traps_32.c

542

printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "

arch/sh/mm/cache.c

267

printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n",

arch/sh/mm/cache.c

271

printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",

arch/sh/mm/cache.c

275

printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n",

arch/sh/mm/cache.c

279

printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",

arch/sh/mm/cache.c

288

printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n",

arch/sh/mm/cache.c

292

printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",

arch/sparc/kernel/devices.c

118

printk(KERN_NOTICE "Booting Linux...\n");

arch/sparc/kernel/smp_32.c

70

printk(KERN_NOTICE "No MID found for CPU%d at node 0x%08x", id, cpu_node);

arch/sparc/mm/init_32.c

185

printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",

arch/um/include/shared/user.h

36

#define UM_KERN_NOTICE KERN_NOTICE

arch/x86/kernel/apm_32.c

2332

printk(KERN_NOTICE

arch/x86/kernel/cpu/mce/threshold.c

153

printk_deferred(KERN_NOTICE "CPU%d BANK%d CMCI storm subsided\n", smp_processor_id(), mce->bank);

arch/x86/kernel/cpu/mce/threshold.c

159

printk_deferred(KERN_NOTICE "CPU%d BANK%d CMCI storm detected\n", smp_processor_id(), mce->bank);

arch/x86/kernel/setup.c

858

printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "

arch/x86/kernel/setup.c

865

printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "

arch/x86/mm/init_32.c

621

printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",

arch/x86/mm/init_32.c

632

printk(KERN_NOTICE "%ldMB LOWMEM available.\n",

arch/x86/platform/geode/alix.c

64

printk(KERN_NOTICE "%s: forced to skip BIOS test, "

drivers/atm/eni.c

123

printk(KERN_NOTICE);

drivers/atm/eni.c

1485

printk(KERN_NOTICE "---recent events---\n");

drivers/atm/eni.c

1724

printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%lx,irq=%d,",

drivers/atm/eni.c

1780

printk(KERN_NOTICE DEV_LABEL "(itf %d): %s,%s\n",dev->number,

drivers/atm/eni.c

179

printk(KERN_NOTICE "Free memory\n");

drivers/atm/eni.c

181

printk(KERN_NOTICE "TX buffers\n");

drivers/atm/eni.c

184

printk(KERN_NOTICE " TX %d @ %p: %ld\n",i,

drivers/atm/eni.c

186

printk(KERN_NOTICE "RX buffers\n");

drivers/atm/eni.c

189

printk(KERN_NOTICE " RX %d @ %p: %ld\n",i,

drivers/atm/eni.c

192

printk(KERN_NOTICE "----\n");

drivers/atm/eni.c

330

printk(KERN_NOTICE "---recent events---\n");

drivers/atm/idt77105.c

130

printk(KERN_NOTICE "%s(itf %d): signal detected again\n",

drivers/atm/idt77105.c

177

printk(KERN_NOTICE "%s(%d) Loopback mode is: %s\n", dev->type,

drivers/atm/idt77105.c

191

printk(KERN_NOTICE "%s(%d) idt77105_ioctl() called\n",dev->type,dev->number);

drivers/atm/idt77105.c

239

printk(KERN_NOTICE "%s(itf %d): signal lost\n",

drivers/atm/idt77105.c

247

printk(KERN_NOTICE "%s(itf %d): receive FIFO overrun\n",

drivers/atm/idt77105.c

254

printk(KERN_NOTICE "%s(itf %d): received cell with error\n",

drivers/atm/lanai.c

2216

printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=%p, irq=%u "

drivers/atm/lanai.c

2219

printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "

drivers/atm/suni.c

302

printk(KERN_NOTICE "%s(itf %d): signal %s\n",dev->type,dev->number,

drivers/base/core.c

4983

define_dev_printk_level(_dev_notice, KERN_NOTICE);

drivers/block/amiflop.c

1383

printk (KERN_NOTICE "floppy disk write protected\n");

drivers/block/amiflop.c

1408

printk (KERN_NOTICE "floppy disk write protected "

drivers/block/amiflop.c

668

printk(KERN_NOTICE "fd: drive 0 didn't identify, setting default %08lx\n", (ulong)fd_def_df0);

drivers/block/ataflop.c

1173

printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive );

drivers/block/ataflop.c

1333

printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive );

drivers/block/drbd/drbd_polymorph_printk.h

108

drbd_printk(KERN_NOTICE, device, fmt, ## args)

drivers/block/z2ram.c

270

printk(KERN_NOTICE DEVICE_NAME

drivers/char/apm-emulation.c

626

printk(KERN_NOTICE "apm: disabled on user request.\n");

drivers/char/applicom.c

273

printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);

drivers/crypto/padlock-aes.c

492

printk(KERN_NOTICE PFX "VIA PadLock detected, but not enabled. Hmm, strange...\n");

drivers/crypto/padlock-aes.c

505

printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n");

drivers/crypto/padlock-aes.c

510

printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n");

drivers/crypto/padlock-sha.c

360

printk(KERN_NOTICE PFX "Using VIA PadLock ACE for SHA1/SHA256 algorithms.\n");

drivers/edac/i10nm_base.c

1264

i10nm_printk(KERN_NOTICE, "Decoding errors via MCA banks for 2LM isn't supported yet\n");

drivers/edac/i10nm_base.c

455

i10nm_printk(KERN_NOTICE, "Get DDR CH numbers: %d, %d\n", chan_num, n);

drivers/edac/skx_base.c

680

skx_printk(KERN_NOTICE, "Only decoding DDR4 address!\n");

drivers/edac/skx_common.c

62

skx_printk(KERN_NOTICE, "No firmware support for address translation.\n");

drivers/edac/skx_common.c

84

skx_printk(KERN_NOTICE, "Not enough ADXL components for 2-level memory.\n");

drivers/firewire/core-card.c

42

define_fw_printk_level(fw_notice, KERN_NOTICE);

drivers/gpu/drm/drm_edid.c

2028

edid_block_dump(KERN_NOTICE, block, block_num);

drivers/gpu/drm/drm_edid.c

2862

edid_block_dump(KERN_NOTICE, base_block, 0);

drivers/infiniband/core/device.c

262

define_ibdev_printk_level(ibdev_notice, KERN_NOTICE);

drivers/input/misc/wistron_btns.c

1141

printk(KERN_NOTICE

drivers/input/mouse/vsxxxaa.c

361

printk(KERN_NOTICE

drivers/isdn/capi/capi.c

1415

printk(KERN_NOTICE "CAPI 2.0 started up with major %d%s\n",

drivers/isdn/capi/capi.c

246

printk(KERN_NOTICE "capi: out of minors\n");

drivers/isdn/capi/kcapi.c

390

printk(KERN_NOTICE "kcapi: controller [%03d] \"%s\" ready.\n",

drivers/isdn/capi/kcapi.c

408

printk(KERN_NOTICE "kcapi: controller [%03d] down.\n", ctr->cnr);

drivers/isdn/capi/kcapi.c

459

printk(KERN_NOTICE "kcapi: controller [%03d]: %s attached\n",

drivers/isdn/capi/kcapi.c

498

printk(KERN_NOTICE "kcapi: controller [%03d]: %s unregistered\n",

drivers/isdn/hardware/mISDN/hfcmulti.c

1321

printk(KERN_NOTICE "Setting GPIOs\n");

drivers/isdn/hardware/mISDN/hfcmulti.c

1325

printk(KERN_NOTICE "calling vpm_init\n");

drivers/isdn/hardware/mISDN/hfcmulti.c

5079

printk(KERN_NOTICE "Watchdog enabled\n");

drivers/isdn/hardware/mISDN/hfcmulti.c

835

printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n",

drivers/isdn/hardware/mISDN/hfcmulti.c

868

printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n",

drivers/isdn/mISDN/dsp_core.c

308

printk(KERN_NOTICE "changing DTMF Threshold "

drivers/isdn/mISDN/layer2.c

2053

printk(KERN_NOTICE "%s: MDL_ERROR|REQ (tei_l2)\n",

drivers/media/dvb-frontends/isl6423.c

35

printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \

drivers/media/dvb-frontends/mb86a16.c

48

printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \

drivers/media/dvb-frontends/stb0899_priv.h

27

printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \

drivers/media/dvb-frontends/stb6100.c

35

printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \

drivers/media/dvb-frontends/stv090x_priv.h

26

printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \

drivers/media/dvb-frontends/stv6110x_priv.h

25

printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \

drivers/media/pci/bt8xx/dst_ca.c

31

printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \

drivers/media/pci/mantis/mantis_common.h

32

printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \

drivers/media/platform/marvell/cafe-driver.c

661

printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n",

drivers/media/platform/via/via-camera.c

1107

printk(KERN_NOTICE "Via camera: serial port is enabled, " \

drivers/media/platform/via/via-camera.c

1109

printk(KERN_NOTICE "Specify override_serial=1 to force " \

drivers/media/platform/via/via-camera.c

1113

printk(KERN_NOTICE "Via camera: overriding serial port\n");

drivers/media/rc/fintek-cir.c

549

fit_pr(KERN_NOTICE, "driver has been successfully loaded\n");

drivers/message/fusion/mptbase.h

211

#define MYIOC_s_NOTE_FMT KERN_NOTICE MYNAM ": %s: "

drivers/mtd/chips/cfi_cmdset_0001.c

2555

printk(KERN_NOTICE "Flash device refused suspend due to pending operation (oldstate %d)\n", chip->oldstate);

drivers/mtd/chips/cfi_cmdset_0001.c

2564

printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state);

drivers/mtd/chips/cfi_cmdset_0001.c

553

printk(KERN_NOTICE "cfi_cmdset_0001: Erase suspend on write enabled\n");

drivers/mtd/chips/cfi_cmdset_0002.c

522

printk(KERN_NOTICE " Fixing Samsung's Amd/Fujitsu"

drivers/mtd/chips/cfi_cmdset_0002.c

773

printk(KERN_NOTICE "number of %s chips: %d\n",

drivers/mtd/chips/cfi_cmdset_0020.c

863

printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus);

drivers/mtd/chips/cfi_probe.c

102

printk(KERN_NOTICE

drivers/mtd/chips/cfi_probe.c

108

printk(KERN_NOTICE

drivers/mtd/chips/fwh_lock.h

103

printk(KERN_NOTICE "using fwh lock/unlock method\n");

drivers/mtd/chips/gen_probe.c

227

printk(KERN_NOTICE "Support for command set %04X not present\n", type);

drivers/mtd/chips/jedec_probe.c

2170

printk(KERN_NOTICE

drivers/mtd/devices/pmc551.c

662

printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n",

drivers/mtd/devices/pmc551.c

671

printk(KERN_NOTICE "pmc551: Invalid aperture size "

drivers/mtd/devices/pmc551.c

690

printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n",

drivers/mtd/devices/pmc551.c

702

printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");

drivers/mtd/devices/pmc551.c

712

printk(KERN_NOTICE "pmc551: Using specified memory "

drivers/mtd/devices/pmc551.c

731

printk(KERN_NOTICE "pmc551: reducing aperture size to "

drivers/mtd/devices/pmc551.c

735

printk(KERN_NOTICE "pmc551: Using existing aperture "

drivers/mtd/devices/pmc551.c

739

printk(KERN_NOTICE "pmc551: Using specified aperture "

drivers/mtd/devices/pmc551.c

746

printk(KERN_NOTICE "pmc551: Unable to map IO space\n");

drivers/mtd/devices/pmc551.c

782

printk(KERN_NOTICE "pmc551: Failed to register new device\n");

drivers/mtd/devices/pmc551.c

792

printk(KERN_NOTICE "Registered pmc551 memory device.\n");

drivers/mtd/devices/pmc551.c

793

printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",

drivers/mtd/devices/pmc551.c

796

printk(KERN_NOTICE "Total memory is %d%sB\n",

drivers/mtd/devices/pmc551.c

809

printk(KERN_NOTICE "pmc551: not detected\n");

drivers/mtd/devices/pmc551.c

812

printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found);

drivers/mtd/devices/pmc551.c

843

printk(KERN_NOTICE "pmc551: %d pmc551 devices unloaded\n", found);

drivers/mtd/devices/slram.c

53

#define E(fmt, args...) printk(KERN_NOTICE fmt, ## args)

drivers/mtd/ftl.c

174

printk(KERN_NOTICE "ftl_cs: FTL header not found.\n");

drivers/mtd/ftl.c

180

printk(KERN_NOTICE "ftl_cs: FTL header corrupt!\n");

drivers/mtd/ftl.c

184

printk(KERN_NOTICE "ftl: FTL EraseUnitSize %x != MTD erasesize %x\n",

drivers/mtd/ftl.c

235

printk(KERN_NOTICE "ftl_cs: format error: too many "

drivers/mtd/ftl.c

256

printk(KERN_NOTICE "ftl_cs: format error: erase units "

drivers/mtd/ftl.c

614

printk(KERN_NOTICE "ftl_cs: reclaim failed: no "

drivers/mtd/ftl.c

644

printk(KERN_NOTICE "ftl_cs: reclaim failed: "

drivers/mtd/ftl.c

657

printk(KERN_NOTICE "ftl_cs: copy_erase_unit failed!\n");

drivers/mtd/ftl.c

730

printk(KERN_NOTICE "ftl_cs: bad free list!\n");

drivers/mtd/ftl.c

756

printk(KERN_NOTICE "ftl_cs: bad partition\n");

drivers/mtd/ftl.c

763

printk(KERN_NOTICE "ftl_cs: bad read offset\n");

drivers/mtd/ftl.c

824

printk(KERN_NOTICE "ftl_cs: set_bam_entry() inconsistency!\n");

drivers/mtd/ftl.c

825

printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, old = 0x%x"

drivers/mtd/ftl.c

837

printk(KERN_NOTICE "ftl_cs: set_bam_entry() "

drivers/mtd/ftl.c

839

printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, cache"

drivers/mtd/ftl.c

852

printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n");

drivers/mtd/ftl.c

853

printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, new = 0x%x\n",

drivers/mtd/ftl.c

870

printk(KERN_NOTICE "ftl_cs: bad partition\n");

drivers/mtd/ftl.c

885

printk(KERN_NOTICE "ftl_cs: bad write offset\n");

drivers/mtd/ftl.c

894

printk(KERN_NOTICE "ftl_cs: internal error: "

drivers/mtd/ftl.c

911

printk(KERN_NOTICE "ftl_cs: block write failed!\n");

drivers/mtd/ftl.c

912

printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, virt_addr"

drivers/mtd/lpddr/qinfo_probe.c

153

printk(KERN_NOTICE"%s Probe at base (0x%08lx) past the end of"

drivers/mtd/maps/cfi_flagadm.c

111

printk(KERN_NOTICE "FlagaDM flash device initialized\n");

drivers/mtd/maps/cfi_flagadm.c

93

printk(KERN_NOTICE "FlagaDM flash device: %x at %x\n",

drivers/mtd/maps/dc21285.c

175

printk (KERN_NOTICE "DC21285 flash support (%d-bit bankwidth)\n",

drivers/mtd/maps/impa7.c

68

printk(KERN_NOTICE MSG_PREFIX "probing 0x%08lx at 0x%08lx\n",

drivers/mtd/maps/l440gx.c

136

printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");

drivers/mtd/maps/l440gx.c

140

printk(KERN_NOTICE "JEDEC probe on BIOS chip failed. Using ROM\n");

drivers/mtd/maps/l440gx.c

76

printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n");

drivers/mtd/maps/netsc520.c

82

printk(KERN_NOTICE "NetSc520 flash device: 0x%Lx at 0x%Lx\n",

drivers/mtd/maps/nettel.c

229

printk(KERN_NOTICE "SNAPGEAR: AMD flash device size = %dK\n",

drivers/mtd/maps/nettel.c

361

printk(KERN_NOTICE "SNAPGEAR: Intel flash device size = %lldKiB\n",

drivers/mtd/maps/pxa2xx-flash.c

77

printk(KERN_NOTICE

drivers/mtd/maps/sc520cdp.c

202

printk(KERN_NOTICE "Could not find PAR responsible for %s\n",

drivers/mtd/maps/sc520cdp.c

204

printk(KERN_NOTICE "Trying default address 0x%lx\n",

drivers/mtd/maps/sc520cdp.c

224

printk(KERN_NOTICE "SC520 CDP flash device: 0x%Lx at 0x%Lx\n",

drivers/mtd/maps/scb2_flash.c

190

printk(KERN_NOTICE MODNAME ": chip size 0x%llx at offset 0x%llx\n",

drivers/mtd/maps/solutionengine.c

46

printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");

drivers/mtd/maps/solutionengine.c

50

printk(KERN_NOTICE "Probing for flash chips at 0x01000000:\n");

drivers/mtd/maps/solutionengine.c

58

printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");

drivers/mtd/maps/solutionengine.c

62

printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n",

drivers/mtd/mtdconcat.c

649

printk(KERN_NOTICE "Concatenating MTD devices:\n");

drivers/mtd/mtdconcat.c

651

printk(KERN_NOTICE "(%d): \"%s\"\n", i, subdev[i]->name);

drivers/mtd/mtdconcat.c

652

printk(KERN_NOTICE "into device \"%s\"\n", name);

drivers/mtd/mtdpart.c

104

printk(KERN_NOTICE "Moving partition %d: "

drivers/mtd/mtdpart.c

126

printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n",

drivers/mtd/mtdpart.c

402

printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n",

drivers/mtd/nand/onenand/onenand_omap2.c

281

printk(KERN_NOTICE "onenand_wait: correctable "

drivers/mtd/nftlmount.c

103

printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n",

drivers/mtd/nftlmount.c

110

printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but went away on reread!\n",

drivers/mtd/nftlmount.c

112

printk(KERN_NOTICE "New data are: %6ph\n", buf);

drivers/mtd/nftlmount.c

122

printk(KERN_NOTICE "NFTL Media Headers at 0x%x and 0x%x disagree.\n",

drivers/mtd/nftlmount.c

151

printk(KERN_NOTICE "NFTL: UnitSizeFactor 0x00 detected. This violates the spec but we think we know what it means...\n");

drivers/mtd/nftlmount.c

153

printk(KERN_NOTICE "Sorry, we don't support UnitSizeFactor 0x%02x\n",

drivers/mtd/nftlmount.c

157

printk(KERN_NOTICE "WARNING: Support for NFTL with UnitSizeFactor 0x%02x is experimental\n",

drivers/mtd/nftlmount.c

165

printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n");

drivers/mtd/nftlmount.c

166

printk(KERN_NOTICE "nb_boot_blocks (%d) + 2 > nb_blocks (%d)\n",

drivers/mtd/nftlmount.c

173

printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n");

drivers/mtd/nftlmount.c

174

printk(KERN_NOTICE "numvunits (%d) > nb_blocks (%d) - nb_boot_blocks(%d) - 2\n",

drivers/mtd/nftlmount.c

224

printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n",

drivers/mtd/nftlmount.c

93

printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but erase mark not present (0x%04x,0x%04x instead)\n",

drivers/mtd/rfd_ftl.c

216

printk(KERN_NOTICE PREFIX "no RFD magic found in '%s'\n",

drivers/net/ethernet/8390/smc-ultra.c

583

printk(KERN_NOTICE "smc-ultra.c: Presently autoprobing (not recommended) for a single card.\n");

drivers/net/ethernet/8390/wd.c

531

printk(KERN_NOTICE "wd.c: Presently autoprobing (not recommended) for a single card.\n");

drivers/net/ethernet/adaptec/starfire.c

1691

printk(KERN_NOTICE "%s: PCI bus congestion, increasing Tx FIFO threshold to %d bytes\n",

drivers/net/ethernet/amd/lance.c

340

printk(KERN_NOTICE "lance.c: Module autoprobing not allowed. Append \"io=0xNNN\" value(s).\n");

drivers/net/ethernet/amd/sunlance.c

1414

printk(KERN_NOTICE "SunLance: warning: overriding option "

drivers/net/ethernet/amd/sunlance.c

1416

printk(KERN_NOTICE "SunLance: warning: mail any problems "

drivers/net/ethernet/amd/sunlance.c

590

printk(KERN_NOTICE "%s: Carrier Lost, trying %s\n",

drivers/net/ethernet/amd/sunlance.c

758

printk(KERN_NOTICE "%s: Carrier Lost, trying %s\n",

drivers/net/ethernet/atheros/atlx/atl2.c

2924

printk(KERN_NOTICE "Warning: no configuration for board #%i\n",

drivers/net/ethernet/atheros/atlx/atl2.c

2926

printk(KERN_NOTICE "Using defaults for all values\n");

drivers/net/ethernet/i825xx/82596.c

1070

printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n",

drivers/net/ethernet/i825xx/82596.c

1142

printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n");

drivers/net/ethernet/i825xx/82596.c

971

printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name);

drivers/net/ethernet/i825xx/lib82596.c

1396

printk(KERN_NOTICE "%s: Only %d multicast addresses supported",

drivers/net/ethernet/ibm/emac/core.c

3164

printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name);

drivers/net/ethernet/ibm/emac/rgmii.c

99

printk(KERN_NOTICE "%pOF: input %d in %s mode\n",

drivers/net/ethernet/ibm/emac/zmii.c

122

printk(KERN_NOTICE "%pOF: bridge in %s mode\n",

drivers/net/ethernet/marvell/pxa168_eth.c

1395

printk(KERN_NOTICE "PXA168 10/100 Ethernet Driver\n");

drivers/net/ethernet/natsemi/natsemi.c

1663

printk(KERN_NOTICE "%s: link down.\n",

drivers/net/ethernet/natsemi/natsemi.c

1672

printk(KERN_NOTICE "%s: link up.\n", dev->name);

drivers/net/ethernet/natsemi/natsemi.c

1759

printk(KERN_NOTICE "%s: Wake-up event %#08x\n",

drivers/net/ethernet/natsemi/natsemi.c

1815

printk(KERN_NOTICE "%s: possible phy reset: "

drivers/net/ethernet/natsemi/natsemi.c

2421

printk(KERN_NOTICE

drivers/net/ethernet/natsemi/natsemi.c

2426

printk(KERN_NOTICE

drivers/net/ethernet/natsemi/natsemi.c

2434

printk(KERN_NOTICE "%s: Link wake-up event %#08x\n",

drivers/net/ethernet/natsemi/natsemi.c

2439

printk(KERN_NOTICE "%s: Rx status FIFO overrun\n",

drivers/net/ethernet/natsemi/natsemi.c

2447

printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,

drivers/net/ethernet/packetengines/hamachi.c

1896

printk(KERN_NOTICE "%s: tx %08x, rx %08x intr\n", dev->name,

drivers/net/ethernet/seeq/sgiseeq.c

658

printk(KERN_NOTICE "%s: transmit timed out, resetting\n", dev->name);

drivers/net/ethernet/sun/sunbmac.c

885

printk(KERN_NOTICE "%s: Memory squeeze, deferring packet.\n", bp->dev->name);

drivers/net/ethernet/sun/sunqe.c

241

printk(KERN_NOTICE "%s: Warning, link state is down.\n", qep->dev->name);

drivers/net/ethernet/tundra/tsi108_eth.c

1286

printk(KERN_NOTICE

drivers/net/ethernet/tundra/tsi108_eth.c

339

printk(KERN_NOTICE "%s : link is down\n", dev->name);

drivers/net/wireless/ath/ath.h

229

ath_printk(KERN_NOTICE, common, fmt, ##__VA_ARGS__)

drivers/pcmcia/i82365.c

872

printk(KERN_NOTICE "i82365: infinite loop in interrupt handler\n");

drivers/pcmcia/tcic.c

538

printk(KERN_NOTICE "tcic: reentered interrupt handler!\n");

drivers/power/supply/collie_battery.c

162

printk(KERN_NOTICE "%s not present\n", psy->desc->name);

drivers/power/supply/olpc_battery.c

666

printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "

drivers/scsi/3w-xxxx.c

1063

dprintk(KERN_NOTICE "3w-xxxx: tw_free_device_extension()\n");

drivers/scsi/3w-xxxx.c

1087

dprintk(KERN_NOTICE "3w-xxxx: tw_initconnection()\n");

drivers/scsi/3w-xxxx.c

1256

dprintk(KERN_NOTICE "3w-xxxx: tw_initialize_device_extension()\n");

drivers/scsi/3w-xxxx.c

1294

dprintk(KERN_NOTICE "3w-xxxx: tw_reset_device_extension()\n");

drivers/scsi/3w-xxxx.c

1348

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam()\n");

drivers/scsi/3w-xxxx.c

1360

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_biosparam(): heads = %d, sectors = %d, cylinders = %d\n", heads, sectors, cylinders);

drivers/scsi/3w-xxxx.c

1405

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry()\n");

drivers/scsi/3w-xxxx.c

1464

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_inquiry_complete()\n");

drivers/scsi/3w-xxxx.c

1503

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense()\n");

drivers/scsi/3w-xxxx.c

1568

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_mode_sense_complete()\n");

drivers/scsi/3w-xxxx.c

1602

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity()\n");

drivers/scsi/3w-xxxx.c

1608

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet virtual address.\n");

drivers/scsi/3w-xxxx.c

1622

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment virtual address.\n");

drivers/scsi/3w-xxxx.c

1633

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad alignment physical address.\n");

drivers/scsi/3w-xxxx.c

1641

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity(): Bad command packet physical address.\n");

drivers/scsi/3w-xxxx.c

1659

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete()\n");

drivers/scsi/3w-xxxx.c

1675

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_capacity_complete(): Capacity = 0x%x.\n", capacity);

drivers/scsi/3w-xxxx.c

1704

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write()\n");

drivers/scsi/3w-xxxx.c

1717

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): Bad command packet virtual address.\n");

drivers/scsi/3w-xxxx.c

1751

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_read_write(): lba = 0x%x num_sectors = 0x%x\n", lba, num_sectors);

drivers/scsi/3w-xxxx.c

1787

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_request_sense()\n");

drivers/scsi/3w-xxxx.c

1812

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_synchronize_cache()\n");

drivers/scsi/3w-xxxx.c

1850

dprintk(KERN_NOTICE "3w-xxxx: tw_scsiop_test_unit_ready()\n");

drivers/scsi/3w-xxxx.c

1946

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ/WRITE.\n");

drivers/scsi/3w-xxxx.c

1950

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught TEST_UNIT_READY.\n");

drivers/scsi/3w-xxxx.c

1954

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught INQUIRY.\n");

drivers/scsi/3w-xxxx.c

1958

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught READ_CAPACITY.\n");

drivers/scsi/3w-xxxx.c

1962

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught REQUEST_SENSE.\n");

drivers/scsi/3w-xxxx.c

1966

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught MODE_SENSE.\n");

drivers/scsi/3w-xxxx.c

1970

dprintk(KERN_NOTICE "3w-xxxx: tw_scsi_queue(): caught SYNCHRONIZE_CACHE.\n");

drivers/scsi/3w-xxxx.c

1977

printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command);

drivers/scsi/3w-xxxx.c

2034

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received host interrupt.\n");

drivers/scsi/3w-xxxx.c

2040

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Received attention interrupt.\n");

drivers/scsi/3w-xxxx.c

2105

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): Response queue request id: %d.\n", request_id);

drivers/scsi/3w-xxxx.c

2124

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_10/READ_6\n");

drivers/scsi/3w-xxxx.c

2128

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught WRITE_10/WRITE_6\n");

drivers/scsi/3w-xxxx.c

2131

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught TEST_UNIT_READY\n");

drivers/scsi/3w-xxxx.c

2135

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught INQUIRY\n");

drivers/scsi/3w-xxxx.c

2139

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught READ_CAPACITY\n");

drivers/scsi/3w-xxxx.c

2143

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught MODE_SENSE\n");

drivers/scsi/3w-xxxx.c

2147

dprintk(KERN_NOTICE "3w-xxxx: tw_interrupt(): caught SYNCHRONIZE_CACHE\n");

drivers/scsi/3w-xxxx.c

362

dprintk(KERN_NOTICE "3w-xxxx: tw_post_command_packet()\n");

drivers/scsi/3w-xxxx.c

551

dprintk(KERN_NOTICE "3w-xxxx: tw_aen_read_queue()\n");

drivers/scsi/3w-xxxx.c

622

dprintk(KERN_NOTICE "3w-xxxx: tw_aen_complete(): Queue'd code 0x%x\n", aen);

drivers/scsi/3w-xxxx.c

688

dprintk(KERN_NOTICE "3w-xxxx: tw_aen_drain_queue()\n");

drivers/scsi/3w-xxxx.c

837

dprintk(KERN_NOTICE "3w-xxxx: tw_allocate_memory()\n");

drivers/scsi/53c700.c

1273

printk(KERN_NOTICE "scsi%d (%d:%d) DEBUG INTERRUPT %d AT %08x[%04x], continuing\n",

drivers/scsi/53c700.c

394

printk(KERN_NOTICE "53c700: Version " NCR_700_VERSION " By James.Bottomley@HansenPartnership.com\n");

drivers/scsi/53c700.c

397

printk(KERN_NOTICE "scsi%d: %s rev %d %s\n", host->host_no,

drivers/scsi/BusLogic.h

114

static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR };

drivers/scsi/NCR5380.c

1930

shost_printk(KERN_NOTICE, instance, "extended message code %02x length %d is too long\n",

drivers/scsi/aha152x.c

1267

printk(KERN_NOTICE

drivers/scsi/aha152x.c

1274

printk(KERN_NOTICE

drivers/scsi/aha152x.c

1286

printk(KERN_NOTICE

drivers/scsi/aha152x.c

2293

shost_printk(KERN_NOTICE, shpnt, "scsi reset in\n");

drivers/scsi/aha152x.c

3417

printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"

drivers/scsi/aic94xx/aic94xx.h

21

#define asd_printk(fmt, ...) printk(KERN_NOTICE ASD_DRIVER_NAME ": " fmt, ## __VA_ARGS__)

drivers/scsi/aic94xx/aic94xx.h

24

#define ENTER printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \

drivers/scsi/aic94xx/aic94xx.h

26

#define EXIT printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \

drivers/scsi/arcmsr/arcmsr_hba.c

1279

printk(KERN_NOTICE

drivers/scsi/arcmsr/arcmsr_hba.c

1293

printk(KERN_NOTICE

drivers/scsi/arcmsr/arcmsr_hba.c

1306

printk(KERN_NOTICE

drivers/scsi/arcmsr/arcmsr_hba.c

1479

printk(KERN_NOTICE

drivers/scsi/arcmsr/arcmsr_hba.c

1502

printk(KERN_NOTICE "arcmsr%d: pCCB ='0x%p' isr got aborted command \n",

drivers/scsi/arcmsr/arcmsr_hba.c

1507

printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command \

drivers/scsi/arcmsr/arcmsr_hba.c

2004

printk(KERN_NOTICE

drivers/scsi/arcmsr/arcmsr_hba.c

2017

printk(KERN_NOTICE

drivers/scsi/arcmsr/arcmsr_hba.c

2030

printk(KERN_NOTICE

drivers/scsi/arcmsr/arcmsr_hba.c

266

printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no);

drivers/scsi/arcmsr/arcmsr_hba.c

275

printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no);

drivers/scsi/arcmsr/arcmsr_hba.c

281

printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no);

drivers/scsi/arcmsr/arcmsr_hba.c

291

printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no);

drivers/scsi/arcmsr/arcmsr_hba.c

3414

printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \

drivers/scsi/arcmsr/arcmsr_hba.c

3433

printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \

drivers/scsi/arcmsr/arcmsr_hba.c

3456

printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \

drivers/scsi/arcmsr/arcmsr_hba.c

3611

printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'"

drivers/scsi/arcmsr/arcmsr_hba.c

3621

printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb"

drivers/scsi/arcmsr/arcmsr_hba.c

3680

printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'"

drivers/scsi/arcmsr/arcmsr_hba.c

3690

printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb"

drivers/scsi/arcmsr/arcmsr_hba.c

3742

printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'"

drivers/scsi/arcmsr/arcmsr_hba.c

3752

printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb"

drivers/scsi/arcmsr/arcmsr_hba.c

4075

printk(KERN_NOTICE "arcmsr%d: ""set ccb high \

drivers/scsi/arcmsr/arcmsr_hba.c

4092

printk(KERN_NOTICE "arcmsr%d: cannot set driver mode\n", \

drivers/scsi/arcmsr/arcmsr_hba.c

4110

printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \

drivers/scsi/arcmsr/arcmsr_hba.c

4125

printk(KERN_NOTICE "arcmsr%d: cdb_phyaddr_hi32=0x%x\n",

drivers/scsi/arcmsr/arcmsr_hba.c

4132

printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \

drivers/scsi/arcmsr/arcmsr_hba.c

4330

printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \

drivers/scsi/arcmsr/arcmsr_hba.c

4341

printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \

drivers/scsi/arcmsr/arcmsr_hba.c

4353

printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \

drivers/scsi/arcmsr/arcmsr_hba.c

4516

printk(KERN_NOTICE "ARCMSR IOP enables EOI_MODE TIMEOUT");

drivers/scsi/arcmsr/arcmsr_hba.c

4536

printk(KERN_NOTICE "arcmsr%d: executing hw bus reset .....\n", acb->host->host_no);

drivers/scsi/arcmsr/arcmsr_hba.c

4743

printk(KERN_NOTICE

drivers/scsi/arcmsr/arcmsr_hba.c

504

printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \

drivers/scsi/arcmsr/arcmsr_hba.c

520

printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \

drivers/scsi/arcmsr/arcmsr_hba.c

537

printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \

drivers/scsi/arcmsr/arcmsr_hba.c

839

printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error\n", acb->host->host_no);

drivers/scsi/arm/acornscsi.c

1555

printk(KERN_NOTICE "scsi%d.%c: Using asynchronous transfer\n",

drivers/scsi/arm/acornscsi.c

1586

printk(KERN_NOTICE "scsi%d.%c: Using synchronous transfer, offset %d, %d ns\n",

drivers/scsi/device_handler/scsi_dh_emc.c

142

sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "

drivers/scsi/device_handler/scsi_dh_emc.c

150

sdev_printk(KERN_NOTICE, sdev,

drivers/scsi/device_handler/scsi_dh_emc.c

158

sdev_printk(KERN_NOTICE, sdev,

drivers/scsi/device_handler/scsi_dh_rdac.c

766

sdev_printk(KERN_NOTICE, sdev,

drivers/scsi/fcoe/fcoe_ctlr.c

337

printk(KERN_NOTICE "libfcoe: host%d: "