IVTV_ERR
IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 encoder memory\n");
IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of vmalloc address space for this window\n");
IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
IVTV_ERR("ioremap failed. Can't get a window into CX23415 decoder memory\n");
IVTV_ERR("Each capture card with a CX23415 needs 8 MB of vmalloc address space for this window\n");
IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 register space\n");
IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of vmalloc address space for this window\n");
IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
IVTV_ERR("Could not initialize i2c\n");
IVTV_ERR("Failed to register irq %d\n", retval);
IVTV_ERR("Error %d setting up streams\n", retval);
IVTV_ERR("Error %d registering devices\n", retval);
IVTV_ERR("Error %d on initialization\n", retval);
IVTV_ERR("Invalid EEPROM\n");
IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv.model);
IVTV_ERR("tveeprom cannot autodetect tuner!\n");
IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
IVTV_ERR(" %s based\n", chipname);
IVTV_ERR("Defaulting to %s card\n", itv->card->name);
IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
IVTV_ERR("card you have to the linux-media mailinglist (www.linuxtv.org)\n");
IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
IVTV_ERR("Could not create ivtv task\n");
IVTV_ERR("Can't enable device!\n");
IVTV_ERR("No suitable DMA available.\n");
IVTV_ERR("Cannot request encoder memory region.\n");
IVTV_ERR("Cannot request register memory region.\n");
IVTV_ERR("Cannot request decoder memory region.\n");
IVTV_ERR("Bus Mastering is not enabled\n");
IVTV_ERR("Failed to initialize on device %s\n",
IVTV_ERR("Tried to open YUV output device but need to send data to mpeg decoder before it can be used\n");
IVTV_ERR("Encoder mailbox not found\n");
IVTV_ERR("Encoder firmware dead!\n");
IVTV_ERR("Decoder mailbox not found\n");
IVTV_ERR("Decoder firmware dead!\n");
IVTV_ERR("ivtv_init_mpeg_decoder failed to set decoder source\n");
IVTV_ERR("ivtv_init_mpeg_decoder failed to start playback\n");
IVTV_ERR("Unable to open firmware %s (must be %ld bytes)\n", fn, size);
IVTV_ERR("Did you put the firmware in the hotplug firmware directory?\n");
IVTV_ERR("Mismatched I2C hardware arrays\n");
IVTV_ERR("DMA TIMEOUT %08x %d\n", read_reg(IVTV_REG_DMASTATUS), itv->cur_dma_stream);
IVTV_ERR("No mailbox allocated\n");
IVTV_ERR("Invalid MB call: cmd = 0x%02x, args = %d\n", cmd, args);
IVTV_ERR("Could not allocate sg_pending for %s stream\n", s->name);
IVTV_ERR("Could not allocate sg_processing for %s stream\n", s->name);
IVTV_ERR("Could not allocate sg_dma for %s stream\n", s->name);
IVTV_ERR("Couldn't allocate buffers for %s stream\n", s->name);
IVTV_ERR("Couldn't register v4l2 device for %s (device node number %d)\n",