drivers/net/wireless/rsi/rsi_91x_hal.c

1016

rsi_dbg(INIT_ZONE, "***** Load 9116 TA Instructions *****\n");

drivers/net/wireless/rsi/rsi_91x_hal.c

1035

rsi_dbg(INIT_ZONE, "%s: loading file %s\n", __func__, metadata_p->name);

drivers/net/wireless/rsi/rsi_91x_hal.c

1110

rsi_dbg(INIT_ZONE, "%s: Successfully loaded %s instructions\n",

drivers/net/wireless/rsi/rsi_91x_hal.c

710

rsi_dbg(INIT_ZONE, "Flash capacity: %d KiloBytes\n", flash_sz);

drivers/net/wireless/rsi/rsi_91x_hal.c

912

rsi_dbg(INIT_ZONE, "%s: Loading file %s\n", __func__, metadata_p->name);

drivers/net/wireless/rsi/rsi_91x_mac80211.c

2015

rsi_dbg(INIT_ZONE, "%s: Performing mac80211 attach\n", __func__);

drivers/net/wireless/rsi/rsi_91x_mgmt.c

2008

rsi_dbg(INIT_ZONE, "Dual band supported\n");

drivers/net/wireless/rsi/rsi_91x_mgmt.c

2012

rsi_dbg(INIT_ZONE,

drivers/net/wireless/rsi/rsi_91x_mgmt.c

2132

rsi_dbg(INIT_ZONE, "Card ready indication from Common HAL\n");

drivers/net/wireless/rsi/rsi_91x_mgmt.c

2139

rsi_dbg(INIT_ZONE, "Card ready indication from WLAN HAL\n");

drivers/net/wireless/rsi/rsi_91x_mgmt.c

2150

rsi_dbg(INIT_ZONE, "MAC Addr %pM", common->mac_addr);

drivers/net/wireless/rsi/rsi_91x_sdio.c

1008

rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio.c

1056

rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio.c

361

rsi_dbg(INIT_ZONE, "%s: Setting the block length\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio.c

847

rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio.c

860

rsi_dbg(INIT_ZONE, "%s: Setup card successfully\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio.c

925

rsi_dbg(INIT_ZONE, "%s: Bring TA out of reset\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio.c

972

rsi_dbg(INIT_ZONE, "***** TA Reset done *****\n");

drivers/net/wireless/rsi/rsi_91x_sdio_ops.c

169

rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio_ops.c

185

rsi_dbg(INIT_ZONE, "%s: Initializing SDIO read start level\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio_ops.c

198

rsi_dbg(INIT_ZONE, "%s: Initializing FIFO ctrl registers\n", __func__);

drivers/net/wireless/rsi/rsi_91x_sdio_ops.c

39

rsi_dbg(INIT_ZONE,

drivers/net/wireless/rsi/rsi_91x_sdio_ops.c

55

rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte);

drivers/net/wireless/rsi/rsi_91x_usb.c

665

rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);

drivers/net/wireless/rsi/rsi_91x_usb.c

793

rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);

drivers/net/wireless/rsi/rsi_91x_usb.c

813

rsi_dbg(INIT_ZONE, "%s: 9113 module detected\n", __func__);

drivers/net/wireless/rsi/rsi_91x_usb.c

816

rsi_dbg(INIT_ZONE, "%s: 9116 module detected\n", __func__);

drivers/net/wireless/rsi/rsi_91x_usb.c

834

rsi_dbg(INIT_ZONE, "Loading firmware...\n");

drivers/net/wireless/rsi/rsi_91x_usb.c

841

rsi_dbg(INIT_ZONE, "%s: Device Init Done\n", __func__);