ERR
EX_DATA_REG(ERR, err) " | " \
EX_DATA_REG(ERR, err) " | " \
EX_DATA_REG(ERR, err) | \
EX_DATA_REG(ERR, err) " | " \
EX_DATA_REG(ERR, err) " | " \
ERR(!e, "Load PKCS#11 ENGINE");
ERR(1, "ENGINE_init");
ERR(!ENGINE_ctrl_cmd_string(e, "PIN", key_pass, 0), "Set PKCS#11 PIN");
ERR(!parms.cert, "Get X.509 from PKCS#11");
ERR(!f, "%s", cert_dst);
ERR(!cert, "load_cert_pkcs11 failed");
ERR(!b, "%s", cert_src);
ERR(!x509, "%s", cert_src);
ERR(!wb, "%s", cert_dst);
ERR(!i2d_X509_bio(wb, x509), "%s", cert_dst);
ERR(1, "OSSL_PROVIDER_try_load(pkcs11)");
ERR(1, "OSSL_PROVIDER_try_load(default)");
ERR(!store, "OSSL_STORE_open");
ERR(!cert, "OSSL_STORE_INFO_get1_CERT");
err = REG_GET_FLD(IVPU_MMU_REG_CMDQ_CONS, ERR, val);
#define ADF_RAS_ERR_CTR_READ(ras_errors, ERR) \
atomic_read(&(ras_errors).counter[ERR])
#define ADF_RAS_ERR_CTR_INC(ras_errors, ERR) \
atomic_inc(&(ras_errors).counter[ERR])
#define nvif_error(o,f,a...) nvif_printk((o), ERROR, ERR, f, ##a)
ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n",
ERR("disabling interrupt source(s)!\n");
ERR("out of memory\n");
ERR("pci_enable_device() failed\n");
ERR("ioremap() failed\n");
ERR("request_irq() failed\n");
ERR("out of memory. aborting.\n");
ERR("cannot register v4l2 device. skipping.\n");
ERR("Error in saa7146_vv_init()");
ERR("cannot register capture v4l2 device. skipping.\n");
ERR("cannot register vbi v4l2 device. skipping.\n");
while ((csr0 = lance->RDP) & (ERR | RINT | TINT) && --boguscnt >= 0) {
if (csr0 & ERR)
goto ERR;
ERR:
goto ERR;
goto ERR;
goto ERR;
goto ERR;
ERR:
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
ERR:
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
ERR:
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
ERR:
goto ERR;
goto ERR;
ERR:
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
ERR:
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
ERR:
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
ERR:
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
goto ERR;
ERR:
goto ERR;
ERR:
ERR("cannot init capture device. skipping\n");
ERR("cannot register capture device. skipping\n");
ERR("cannot register vbi v4l2 device. skipping\n");
ERR("SETUP len %d, csr %08x\n", rxcount, csr);
ERR("%s status, can't report\n", ep->ep.name);
ERR("can't bind to transceiver\n");
ERR("unsupported fifo_mode #%d\n", fifo_mode);
ERR("unrecognized UDC HMC mode %d\n", hmc);
ERR("can't get irq %d, err %d\n",
ERR("can't get irq %d, err %d\n",
ERR("can't get irq %d, err %d\n",
ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
ERR("Software reset timeout\n");
ERR("Clock not ready after %dms\n", timeout);
ERR("Please make sure that the H_WAKEUP pin is pulled low!\n");
ERR("Invalid chip ID %04x\n", val);
ERR("Platform data structure not initialized\n");
ERR("USE_PLATFORM_DELAY defined, but delay function not "
ERR("See comments in drivers/usb/host/isp116x-hcd.c\n");
ERR("init error, %d\n", ret);
ERR("%s %d: ep->nextpid %d\n", __func__, __LINE__,
ERR("Unrecoverable error, HC is dead!\n");
ERR("Isochronous transfers not supported\n");
ERR("SetupEnd came in a wrong ep0stage %s\n",
ERR("SETUP packet len %d != 8 ?\n", len);
ERR("bogus ep0 stage %d\n", musb->ep0_stage);
ERR("no URB for end 0\n");
ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
ERR("Rx interrupt with no errors or packet!\n");
ERR("broken !rx_reinit, ep%d csr %04x\n",
ERR("vbus too slow, devctl %02x\n", devctl);
ERR("Dma pipe allocation error dir=%d ch=%d\n",
static unsigned int smbd_logging_level = ERR;
BUILD_BUG_SAME(ERR);
log_rdma_event(ERR, "connect to %pISpsfc failed: %1pe\n",
log_write(ERR, "payload size %d > max size %d\n",
return M(IN) | M(OUT) | M(PRI) | M(ERR) | M(NVAL) |
return M(IN) | M(OUT) | M(PRI) | M(ERR) | M(NVAL) |
device_status_mask = ERR | TIMO | END | CMPL | RQS,
board_status_mask = ERR | TIMO | END | CMPL | SPOLL |
ERR(out->rx_cnt.err));
ERR(out->redir_cnt.err));
str, PPS(pps), DROP(drop), ERR(err));
ERR(drop));
ERR(drop));
action2str(rec_i), ERR(drop));
str, ERR(drop));
} while (key3 != ERR);
if (key == KEY_ESC && key2 == ERR)
else if (key != ERR && key != KEY_ESC && key2 == ERR)
if (match_start == ERR)
ERR(!e, "Load PKCS#11 ENGINE");
ERR(1, "ENGINE_init");
ERR(!ENGINE_ctrl_cmd_string(e, "PIN", key_pass, 0), "Set PKCS#11 PIN");
ERR(!private_key, "%s", private_key_name);
ERR(!b, "%s", private_key_name);
ERR(!private_key, "%s", private_key_name);
ERR(!b, "%s", x509_name);
ERR(1, "%s", x509_name);
ERR(BIO_reset(b) != 0, "%s", x509_name);
ERR(!x509, "%s", x509_name);
ERR(asprintf(&dest_name, "%s.~signed~", module_name) < 0,
ERR(!bm, "%s", module_name);
ERR(!digest_algo, "EVP_get_digestbyname");
ERR(!cms, "CMS_sign");
ERR(!CMS_add1_signer(cms, x509, private_key, digest_algo, flags),
ERR(CMS_final(cms, bm, NULL, flags) != 1,
ERR(asprintf(&sig_file_name, "%s.p7s", module_name) < 0,
ERR(!b, "%s", sig_file_name);
ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) != 1,
ERR(!bd, "%s", dest_name);
ERR(BIO_reset(bm) < 0, "%s", module_name);
ERR(BIO_write(bd, buf, n) < 0, "%s", dest_name);
ERR(n < 0, "%s", module_name);
ERR(i2d_CMS_bio_stream(bd, cms, NULL, 0) != 1, "%s", dest_name);
ERR(!b, "%s", raw_sig_name);
ERR(BIO_write(bd, buf, n) < 0, "%s", dest_name);
ERR(BIO_write(bd, &sig_info, sizeof(sig_info)) < 0, "%s", dest_name);
ERR(BIO_write(bd, MODULE_SIGNATURE_MARKER, sizeof(MODULE_SIGNATURE_MARKER) - 1) < 0,
ERR(BIO_free(bd) != 1, "%s", dest_name);
ERR(rename(dest_name, module_name) < 0, "%s", dest_name);
ERR(1, "OSSL_PROVIDER_try_load(pkcs11)");
ERR(1, "OSSL_PROVIDER_try_load(default)");
ERR(!store, "OSSL_STORE_open");
ERR(!private_key, "OSSL_STORE_INFO_get1_PKEY");