Symbol: DEBUG2
drivers/pinctrl/pinctrl-k210.c
427
K210_FUNC(DEBUG2, OUT),
drivers/scsi/qla4xxx/ql4_83xx.c
1006
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1065
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1094
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1247
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Restart done\n",
drivers/scsi/qla4xxx/ql4_83xx.c
1367
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: HW State: NEED RESET\n",
drivers/scsi/qla4xxx/ql4_83xx.c
1379
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1410
DEBUG2(ql4_printk(KERN_INFO, ha, "SRE-Shim Ctrl:0x%x\n", val));
drivers/scsi/qla4xxx/ql4_83xx.c
1413
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1418
DEBUG2(pr_info("0x%x ", val));
drivers/scsi/qla4xxx/ql4_83xx.c
1421
DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c
1424
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1429
DEBUG2(pr_info("0x%x ", val));
drivers/scsi/qla4xxx/ql4_83xx.c
1432
DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c
1435
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1440
DEBUG2(pr_info("0x%x ", val));
drivers/scsi/qla4xxx/ql4_83xx.c
1443
DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c
1446
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1451
DEBUG2(pr_info("0x%x ", val));
drivers/scsi/qla4xxx/ql4_83xx.c
1454
DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c
1457
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1465
DEBUG2(pr_info("0x%x ", val));
drivers/scsi/qla4xxx/ql4_83xx.c
1468
DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c
1471
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1479
DEBUG2(pr_info("0x%x ", val));
drivers/scsi/qla4xxx/ql4_83xx.c
1482
DEBUG2(pr_info("\n"));
drivers/scsi/qla4xxx/ql4_83xx.c
1487
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
1578
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: drv_active = 0x%X\n",
drivers/scsi/qla4xxx/ql4_83xx.c
400
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: idc_ctrl = %d\n", __func__,
drivers/scsi/qla4xxx/ql4_83xx.c
411
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: idc_ctrl = %d\n", __func__,
drivers/scsi/qla4xxx/ql4_83xx.c
493
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
517
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: reset acknowledged\n",
drivers/scsi/qla4xxx/ql4_83xx.c
594
DEBUG2(ql4_printk(KERN_DEBUG, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
614
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
655
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Read firmware from flash\n",
drivers/scsi/qla4xxx/ql4_83xx.c
667
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Wrote firmware size %d to MS\n",
drivers/scsi/qla4xxx/ql4_83xx.c
685
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
793
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
823
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_83xx.c
842
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_attr.c
61
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_attr.c
70
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
459
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
drivers/scsi/qla4xxx/ql4_bsg.c
472
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
481
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
498
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
524
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
530
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
545
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
562
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
drivers/scsi/qla4xxx/ql4_bsg.c
568
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Default port config=%08X\n",
drivers/scsi/qla4xxx/ql4_bsg.c
586
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: New port config=%08X\n",
drivers/scsi/qla4xxx/ql4_bsg.c
602
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__,
drivers/scsi/qla4xxx/ql4_bsg.c
613
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
drivers/scsi/qla4xxx/ql4_bsg.c
619
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: port config=%08X\n", __func__,
drivers/scsi/qla4xxx/ql4_bsg.c
629
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
647
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__,
drivers/scsi/qla4xxx/ql4_bsg.c
664
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
drivers/scsi/qla4xxx/ql4_bsg.c
700
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
714
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
745
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_bsg.c
760
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
drivers/scsi/qla4xxx/ql4_init.c
1008
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
1067
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
drivers/scsi/qla4xxx/ql4_init.c
1102
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
1151
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
drivers/scsi/qla4xxx/ql4_init.c
1221
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
1229
DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
drivers/scsi/qla4xxx/ql4_init.c
1249
DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n"));
drivers/scsi/qla4xxx/ql4_init.c
156
DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
drivers/scsi/qla4xxx/ql4_init.c
165
DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO "
drivers/scsi/qla4xxx/ql4_init.c
233
DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_init.c
241
DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_init.c
254
DEBUG2(printk("scsi%ld: %s: LinkLocal Router & "
drivers/scsi/qla4xxx/ql4_init.c
261
DEBUG2(printk("scsi%ld: %s: Wait for additional "
drivers/scsi/qla4xxx/ql4_init.c
264
DEBUG2(printk("IPv4 "));
drivers/scsi/qla4xxx/ql4_init.c
267
DEBUG2(printk("IPv6LinkLocal "));
drivers/scsi/qla4xxx/ql4_init.c
270
DEBUG2(printk("IPv6Addr0 "));
drivers/scsi/qla4xxx/ql4_init.c
273
DEBUG2(printk("IPv6Addr1 "));
drivers/scsi/qla4xxx/ql4_init.c
274
DEBUG2(printk("\"\n"));
drivers/scsi/qla4xxx/ql4_init.c
31
DEBUG2(printk("scsi%ld: %s: Invalid function number, "
drivers/scsi/qla4xxx/ql4_init.c
36
DEBUG2(printk("scsi%ld: %s: mac_index %d.\n", ha->host_no, __func__,
drivers/scsi/qla4xxx/ql4_init.c
367
DEBUG2(ql4_printk(KERN_INFO, ha, "Minimum num of entries = %d\n",
drivers/scsi/qla4xxx/ql4_init.c
369
DEBUG2(ql4_printk(KERN_INFO, ha, "Dump template size = %d\n",
drivers/scsi/qla4xxx/ql4_init.c
371
DEBUG2(ql4_printk(KERN_INFO, ha, "Selected Capture mask =0x%x\n",
drivers/scsi/qla4xxx/ql4_init.c
387
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
390
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
406
DEBUG2(ql4_printk(KERN_INFO, ha, "Waiting for Firmware Ready..\n"));
drivers/scsi/qla4xxx/ql4_init.c
414
DEBUG2(printk("scsi%ld: %s: unable to get firmware "
drivers/scsi/qla4xxx/ql4_init.c
420
DEBUG2(printk("scsi%ld: %s: an unrecoverable error has"
drivers/scsi/qla4xxx/ql4_init.c
438
DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
drivers/scsi/qla4xxx/ql4_init.c
444
DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
drivers/scsi/qla4xxx/ql4_init.c
456
DEBUG2(printk(KERN_INFO "scsi%ld: %s:"
drivers/scsi/qla4xxx/ql4_init.c
462
DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_init.c
478
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
482
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
488
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
494
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
500
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
512
DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - "
drivers/scsi/qla4xxx/ql4_init.c
526
DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",
drivers/scsi/qla4xxx/ql4_init.c
530
DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting "
drivers/scsi/qla4xxx/ql4_init.c
535
DEBUG2(printk("scsi%ld: %s: FW initialized, but "
drivers/scsi/qla4xxx/ql4_init.c
565
DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware "
drivers/scsi/qla4xxx/ql4_init.c
599
DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no,
drivers/scsi/qla4xxx/ql4_init.c
716
DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for "
drivers/scsi/qla4xxx/ql4_init.c
733
DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot "
drivers/scsi/qla4xxx/ql4_init.c
769
DEBUG2(printk("scsi%ld: %s: Waiting for "
drivers/scsi/qla4xxx/ql4_init.c
775
DEBUG2(printk("scsi%ld: %s: Global Init Semaphore "
drivers/scsi/qla4xxx/ql4_init.c
806
DEBUG2(printk("scsi%ld: %s: port_ctrl = 0x%08X\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_init.c
819
DEBUG2(printk("scsi%ld: %s: H/W Config complete - mbox[0]= "
drivers/scsi/qla4xxx/ql4_init.c
836
DEBUG2(printk("scsi%ld: %s: Get firmware "
drivers/scsi/qla4xxx/ql4_init.c
843
DEBUG2(printk("scsi%ld: %s: Firmware "
drivers/scsi/qla4xxx/ql4_init.c
853
DEBUG2(printk("scsi%ld: %s: Firmware in "
drivers/scsi/qla4xxx/ql4_init.c
932
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_init.c
996
DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_iocb.c
300
DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
drivers/scsi/qla4xxx/ql4_iocb.c
517
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: fail to get new mrb\n",
drivers/scsi/qla4xxx/ql4_isr.c
1000
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
1005
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
1011
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_isr.c
1017
DEBUG2(printk("scsi%ld: Unknown mailbox status %08X\n",
drivers/scsi/qla4xxx/ql4_isr.c
1106
DEBUG2(ql4_printk(KERN_INFO, ha, "Spurious Interrupt\n"));
drivers/scsi/qla4xxx/ql4_isr.c
1130
DEBUG2(printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_isr.c
1160
DEBUG2(printk(KERN_INFO "scsi%ld: Fatal Error, "
drivers/scsi/qla4xxx/ql4_isr.c
1335
DEBUG2(printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_isr.c
137
DEBUG2(printk("scsi%ld: %s: Command already returned back to "
drivers/scsi/qla4xxx/ql4_isr.c
1495
DEBUG2(printk("qla4xxx(%ld): AEN[%d]=0x%08x, mbx1=0x%08x mbx2=0x%08x"
drivers/scsi/qla4xxx/ql4_isr.c
1505
DEBUG2(printk("scsi%ld: AEN[%d] %04x, index "
drivers/scsi/qla4xxx/ql4_isr.c
1550
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
1571
DEBUG2(ql4_printk(KERN_INFO, ha, "MSI: Enabled.\n"));
drivers/scsi/qla4xxx/ql4_isr.c
1592
DEBUG2(ql4_printk(KERN_INFO, ha, "INTx: Enabled.\n"));
drivers/scsi/qla4xxx/ql4_isr.c
171
DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: "
drivers/scsi/qla4xxx/ql4_isr.c
199
DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: Device RESET occurred\n",
drivers/scsi/qla4xxx/ql4_isr.c
207
DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: Abort occurred\n",
drivers/scsi/qla4xxx/ql4_isr.c
215
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: Timeout\n",
drivers/scsi/qla4xxx/ql4_isr.c
234
DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: " "Data overrun\n",
drivers/scsi/qla4xxx/ql4_isr.c
260
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
28
DEBUG2(ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%d:%llu: %s:"
drivers/scsi/qla4xxx/ql4_isr.c
292
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
315
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: SCS_DEVICE "
drivers/scsi/qla4xxx/ql4_isr.c
335
DEBUG2(printk("scsi%ld:%d:%llu: %s: QUEUE FULL detected "
drivers/scsi/qla4xxx/ql4_isr.c
440
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: mbox_cmd = 0x%x, "
drivers/scsi/qla4xxx/ql4_isr.c
45
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: %s: sense key = %x, "
drivers/scsi/qla4xxx/ql4_isr.c
458
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: invalid mbox_cmd = "
drivers/scsi/qla4xxx/ql4_isr.c
525
DEBUG2(printk("scsi%ld: %s: FW device queue full, "
drivers/scsi/qla4xxx/ql4_isr.c
536
DEBUG2(printk("scsi%ld: %s: Continuation entry - "
drivers/scsi/qla4xxx/ql4_isr.c
541
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
552
DEBUG2(printk("scsi%ld: %s: Invalid entry %x in "
drivers/scsi/qla4xxx/ql4_isr.c
570
DEBUG2(printk("scsi%ld: %s: Invalid handle(srb)=%p type=%x IOCS=%x\n",
drivers/scsi/qla4xxx/ql4_isr.c
591
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
596
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
710
DEBUG2(printk("scsi%ld: %s:Don't Reset HBA\n",
drivers/scsi/qla4xxx/ql4_isr.c
723
DEBUG2(printk("scsi%ld: AEN %04x, ERROR Status, "
drivers/scsi/qla4xxx/ql4_isr.c
766
DEBUG2(printk("scsi%ld: AEN %04x DHCP LEASE "
drivers/scsi/qla4xxx/ql4_isr.c
780
DEBUG2(printk("scsi%ld: AEN %04x\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_isr.c
818
DEBUG2(ql4_printk(KERN_INFO, ha, "scsi%ld: AEN %04x\n",
drivers/scsi/qla4xxx/ql4_isr.c
823
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
834
DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x, "
drivers/scsi/qla4xxx/ql4_isr.c
843
DEBUG2(printk("scsi%ld: AEN %04x, mbox_sts[1]=%04x, "
drivers/scsi/qla4xxx/ql4_isr.c
86
DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned "
drivers/scsi/qla4xxx/ql4_isr.c
862
DEBUG2(printk("scsi%ld: AEN[%d] %04x queued "
drivers/scsi/qla4xxx/ql4_isr.c
878
DEBUG2(printk("scsi%ld: %s: aen %04x, queue "
drivers/scsi/qla4xxx/ql4_isr.c
883
DEBUG2(printk("scsi%ld: DUMP AEN QUEUE\n",
drivers/scsi/qla4xxx/ql4_isr.c
887
DEBUG2(printk("AEN[%d] %04x %04x %04x "
drivers/scsi/qla4xxx/ql4_isr.c
896
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_isr.c
902
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_isr.c
909
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
930
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
935
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
960
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
965
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
972
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
977
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
985
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_isr.c
992
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
101
DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_mbx.c
1026
DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1032
DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
drivers/scsi/qla4xxx/ql4_mbx.c
111
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, "
drivers/scsi/qla4xxx/ql4_mbx.c
1110
DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
drivers/scsi/qla4xxx/ql4_mbx.c
1202
DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%llu: abort task FAILED: "
drivers/scsi/qla4xxx/ql4_mbx.c
1229
DEBUG2(printk("scsi%ld:%d:%llu: lun reset issued\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_mbx.c
1274
DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_mbx.c
128
DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1314
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
drivers/scsi/qla4xxx/ql4_mbx.c
1342
DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Unable to alloc memory "
drivers/scsi/qla4xxx/ql4_mbx.c
1358
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_ABOUT_FW "
drivers/scsi/qla4xxx/ql4_mbx.c
137
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
1411
DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1434
DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1457
DEBUG2(ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1483
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_WRITE_FLASH "
drivers/scsi/qla4xxx/ql4_mbx.c
1504
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
1553
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
1606
DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1854
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_CONN_CLOSE "
drivers/scsi/qla4xxx/ql4_mbx.c
1888
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
1913
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_DISABLE_ACB "
drivers/scsi/qla4xxx/ql4_mbx.c
1956
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_GET_ACB "
drivers/scsi/qla4xxx/ql4_mbx.c
1978
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_SET_ACB "
drivers/scsi/qla4xxx/ql4_mbx.c
2008
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
2032
DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%pmR]\n", fw_ddb_entry->isid));
drivers/scsi/qla4xxx/ql4_mbx.c
2055
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
2065
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
208
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
2165
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
2188
DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: "
drivers/scsi/qla4xxx/ql4_mbx.c
2215
DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
drivers/scsi/qla4xxx/ql4_mbx.c
2241
DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
drivers/scsi/qla4xxx/ql4_mbx.c
2267
DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
drivers/scsi/qla4xxx/ql4_mbx.c
2411
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
303
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
331
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
388
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_mbx.c
410
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_mbx.c
591
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_mbx.c
597
DEBUG2(qla4xxx_dump_buffer(init_fw_cb, sizeof(struct addr_ctrl_blk)));
drivers/scsi/qla4xxx/ql4_mbx.c
631
DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
drivers/scsi/qla4xxx/ql4_mbx.c
676
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_mbx.c
684
DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n",
drivers/scsi/qla4xxx/ql4_mbx.c
720
DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
drivers/scsi/qla4xxx/ql4_mbx.c
753
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
drivers/scsi/qla4xxx/ql4_mbx.c
761
DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n",
drivers/scsi/qla4xxx/ql4_mbx.c
784
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
drivers/scsi/qla4xxx/ql4_mbx.c
792
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
804
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
839
DEBUG2(printk("scsi%ld: %s: ddb [%d] out of range.\n",
drivers/scsi/qla4xxx/ql4_mbx.c
856
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed"
drivers/scsi/qla4xxx/ql4_mbx.c
862
DEBUG2(printk("scsi%ld: %s: ddb mismatch [%d] != [%d].\n",
drivers/scsi/qla4xxx/ql4_mbx.c
929
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_mbx.c
94
DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
drivers/scsi/qla4xxx/ql4_mbx.c
968
DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n",
drivers/scsi/qla4xxx/ql4_mbx.c
991
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nvram.c
208
DEBUG2(printk("scsi%ld : Trying to get SEM lock - mask= 0x%x, code = "
drivers/scsi/qla4xxx/ql4_nvram.c
216
DEBUG2(printk("scsi%ld : Got SEM LOCK - mask= 0x%x, "
drivers/scsi/qla4xxx/ql4_nvram.c
235
DEBUG2(printk("scsi%ld : UNLOCK SEM - mask= 0x%x\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_nvram.c
249
DEBUG2(printk("scsi%ld : Got SEM LOCK - mask= 0x%x, code = "
drivers/scsi/qla4xxx/ql4_nx.c
1092
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_nx.c
1281
DEBUG2(printk("scsi%ld: %s: bootldr=0x%lx, fw_image=0x%x\n",
drivers/scsi/qla4xxx/ql4_nx.c
1591
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
1910
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2022
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2026
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2037
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2075
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2098
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2104
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2115
DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2139
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2196
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2299
DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2311
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2317
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2326
DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s datacount: 0x%lx\n",
drivers/scsi/qla4xxx/ql4_nx.c
2339
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2401
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2433
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2438
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2468
DEBUG2(ql4_printk(KERN_INFO, ha, "Entering fn: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
2473
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2478
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2485
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2491
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2533
DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s datacount: 0x%x\n",
drivers/scsi/qla4xxx/ql4_nx.c
2560
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
2960
DEBUG2(ql4_printk(KERN_INFO, ha, "[%s]: fl_addr: 0x%x, count: 0x%x\n",
drivers/scsi/qla4xxx/ql4_nx.c
3047
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
3192
DEBUG2(ql4_printk(KERN_INFO, ha, "Leaving fn: %s Last entry: 0x%x\n",
drivers/scsi/qla4xxx/ql4_nx.c
3319
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
3502
DEBUG2(ql4_printk(KERN_INFO, ha, "Device state is 0x%x = %s\n",
drivers/scsi/qla4xxx/ql4_nx.c
3688
DEBUG2(ql4_printk(KERN_INFO, ha, "FLTL[%s] = 0x%x.\n", loc, *start));
drivers/scsi/qla4xxx/ql4_nx.c
371
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
3722
DEBUG2(ql4_printk(KERN_INFO, ha, "Unsupported FLT detected: "
drivers/scsi/qla4xxx/ql4_nx.c
3733
DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FLT detected: "
drivers/scsi/qla4xxx/ql4_nx.c
3793
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
3836
DEBUG2(ql4_printk(KERN_INFO, ha, "Inconsistent FDT detected: "
drivers/scsi/qla4xxx/ql4_nx.c
3862
DEBUG2(ql4_printk(KERN_INFO, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x "
drivers/scsi/qla4xxx/ql4_nx.c
3889
DEBUG2(ql4_printk(KERN_DEBUG, ha,
drivers/scsi/qla4xxx/ql4_nx.c
3891
DEBUG2(ql4_printk(KERN_DEBUG, ha,
drivers/scsi/qla4xxx/ql4_nx.c
3973
DEBUG2(printk("scsi%ld: %s: status = %d\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_nx.c
4031
DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
drivers/scsi/qla4xxx/ql4_nx.c
4046
DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO failed\n",
drivers/scsi/qla4xxx/ql4_nx.c
4054
DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO data receive"
drivers/scsi/qla4xxx/ql4_nx.c
4071
DEBUG2(printk("scsi%ld: %s: mac %pM serial %s\n",
drivers/scsi/qla4xxx/ql4_nx.c
4089
DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
4097
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
4110
DEBUG2(ql4_printk(KERN_INFO, ha, "%s\n", __func__));
drivers/scsi/qla4xxx/ql4_nx.c
4118
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
470
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_nx.c
495
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
1073
DEBUG2(ql4_printk(KERN_INFO, ha, "Func: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_os.c
1737
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI4\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
1743
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: %pI6\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
1763
DEBUG2(pr_info_ratelimited("%s: host: %ld\n", __func__, ha->host_no));
drivers/scsi/qla4xxx/ql4_os.c
1778
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
1795
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
1829
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
2955
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
2964
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
2974
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
3054
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
3059
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
3064
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
3084
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
3109
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
3153
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: host: %ld\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
3216
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: conn_idx = %u\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
3236
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: sid = %d, cid = %d\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
3266
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: sid = %d, cid = %d\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
3320
DEBUG2(printk(KERN_INFO "%s: DDB state [%d]\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
3344
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: cid = %d\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
335
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv4 Ping src: %pI4 "
drivers/scsi/qla4xxx/ql4_os.c
3428
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
drivers/scsi/qla4xxx/ql4_os.c
3483
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
drivers/scsi/qla4xxx/ql4_os.c
352
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: LinkLocal Ping "
drivers/scsi/qla4xxx/ql4_os.c
374
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv6 "
drivers/scsi/qla4xxx/ql4_os.c
381
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv6 "
drivers/scsi/qla4xxx/ql4_os.c
3933
DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
drivers/scsi/qla4xxx/ql4_os.c
3975
DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
drivers/scsi/qla4xxx/ql4_os.c
4368
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen "
drivers/scsi/qla4xxx/ql4_os.c
4521
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
4539
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
4607
DEBUG2(printk("scsi%ld: %s: scheduling dpc routine"
drivers/scsi/qla4xxx/ql4_os.c
4616
DEBUG2(ha->seconds_since_last_intr++);
drivers/scsi/qla4xxx/ql4_os.c
4641
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
4677
DEBUG2(printk(KERN_ERR "scsi%ld: %s\n", ha->host_no, __func__));
drivers/scsi/qla4xxx/ql4_os.c
4730
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_os.c
4869
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: adapter OFFLINE\n", __func__));
drivers/scsi/qla4xxx/ql4_os.c
4898
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
4943
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
5012
DEBUG2(printk("scsi%ld: recover adapter - retrying "
drivers/scsi/qla4xxx/ql4_os.c
5021
DEBUG2(printk("scsi%ld: recover adapter - "
drivers/scsi/qla4xxx/ql4_os.c
5031
DEBUG2(printk("scsi%ld: recover adapter "
drivers/scsi/qla4xxx/ql4_os.c
5057
DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_os.c
5166
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
5191
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
5323
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
5332
DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n",
drivers/scsi/qla4xxx/ql4_os.c
5399
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
drivers/scsi/qla4xxx/ql4_os.c
5420
DEBUG2(printk("scsi%ld: %s: SR|FSR "
drivers/scsi/qla4xxx/ql4_os.c
5542
DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n",
drivers/scsi/qla4xxx/ql4_os.c
5549
DEBUG2(printk(KERN_INFO "%s: ioremap from %lx a size of %lx\n",
drivers/scsi/qla4xxx/ql4_os.c
5950
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Adapter boot "
drivers/scsi/qla4xxx/ql4_os.c
5970
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
5989
DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: Get Flash"
drivers/scsi/qla4xxx/ql4_os.c
5996
DEBUG2(ql4_printk(KERN_INFO, ha, "Firmware boot options"
drivers/scsi/qla4xxx/ql4_os.c
6014
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary target ID %d, Secondary"
drivers/scsi/qla4xxx/ql4_os.c
6094
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
6103
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: No Flash DDB found at "
drivers/scsi/qla4xxx/ql4_os.c
6131
DEBUG2(ql4_printk(KERN_INFO, ha, "Setting chap\n"));
drivers/scsi/qla4xxx/ql4_os.c
6149
DEBUG2(ql4_printk(KERN_INFO, ha, "Setting BIDI chap\n"));
drivers/scsi/qla4xxx/ql4_os.c
6182
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
6196
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary boot target not "
drivers/scsi/qla4xxx/ql4_os.c
6208
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Secondary boot target not"
drivers/scsi/qla4xxx/ql4_os.c
6290
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_os.c
6348
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
6357
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
6378
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_os.c
6386
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_os.c
6521
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_os.c
6529
DEBUG2(ql4_printk(KERN_WARNING, ha,
drivers/scsi/qla4xxx/ql4_os.c
6678
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
6797
DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
drivers/scsi/qla4xxx/ql4_os.c
6960
DEBUG2(ql4_printk(KERN_ERR, ha, "Unable to get ep\n"));
drivers/scsi/qla4xxx/ql4_os.c
6995
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
7026
DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
drivers/scsi/qla4xxx/ql4_os.c
7056
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
7132
DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
drivers/scsi/qla4xxx/ql4_os.c
7153
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
7307
DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Invalid portal type\n",
drivers/scsi/qla4xxx/ql4_os.c
7318
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
7385
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
7442
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
7452
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
7465
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
7581
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
8358
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
8392
DEBUG2(ql4_printk(KERN_ERR, ha, "%s: start offset=%u, end offset=%u\n",
drivers/scsi/qla4xxx/ql4_os.c
8397
DEBUG2(ql4_printk(KERN_ERR, ha, "%s:Invalid DDB index %u\n",
drivers/scsi/qla4xxx/ql4_os.c
8406
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
8456
DEBUG2(ql4_printk(KERN_ERR, ha,
drivers/scsi/qla4xxx/ql4_os.c
8531
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
8589
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
8610
DEBUG2(ql4_printk(KERN_INFO, ha,
drivers/scsi/qla4xxx/ql4_os.c
8781
DEBUG2(printk("scsi: %s: retrying adapter initialization "
drivers/scsi/qla4xxx/ql4_os.c
8802
DEBUG2(printk(KERN_ERR "HW STATE: FAILED\n"));
drivers/scsi/qla4xxx/ql4_os.c
8813
DEBUG2(printk("scsi: %s: Starting kernel thread for "
drivers/scsi/qla4xxx/ql4_os.c
8927
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: "
drivers/scsi/qla4xxx/ql4_os.c
919
DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n",
drivers/scsi/qla4xxx/ql4_os.c
9260
DEBUG2(printk("scsi%ld:%d:%llu: Abort handler timed out\n",
drivers/scsi/qla4xxx/ql4_os.c
9299
DEBUG2(printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_os.c
9366
DEBUG2(printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_os.c
9452
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
drivers/scsi/qla4xxx/ql4_os.c
9467
DEBUG2(printk("scsi%ld:%d: %s: Unable to reset host. Adapter "
drivers/scsi/qla4xxx/ql4_os.c
9536
DEBUG2(ql4_printk(KERN_INFO, ha, "%s %s\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
9548
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Don't Reset HBA\n",
drivers/scsi/qla4xxx/ql4_os.c
9587
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: recover adapter fail\n",