DC_LOG_ERROR
DC_LOG_ERROR("Fail to commit a seamless minimal transition state between current and new states.\nThis pipe topology update is non-seamless!\n");
DC_LOG_ERROR("performing non-seamless pipe topology transition with surface only update!\n");
DC_LOG_ERROR("%s: Invalid link encoder assignments - 0x%x\n", __func__, valid_bitmap);
DC_LOG_ERROR("Failed to allocate phantom stream.\n");
DC_LOG_ERROR("Failed to free phantom stream %p in dc state %p.\n", phantom_stream, state);
DC_LOG_ERROR("Failed to allocate phantom plane.\n");
DC_LOG_ERROR("Failed to free phantom plane %p in dc state %p.\n", phantom_plane, state);
DC_LOG_ERROR("%s: invalid parameters.", __func__);
DC_LOG_ERROR("timeout updating trace buffer mask word\n");
DC_LOG_ERROR("timeout updating trace buffer mask word\n");
DC_LOG_ERROR("%s: invalid parameters.", __func__);
DC_LOG_ERROR("%s: DMCUB error - collecting diagnostic data\n", __func__);
DC_LOG_ERROR("%s: dc_dmub_srv_get_diagnostic_data failed.", __func__);
DC_LOG_ERROR(
DC_LOG_ERROR(
DC_LOG_ERROR(
DC_LOG_ERROR(
DC_LOG_ERROR(
DC_LOG_ERROR(
DC_LOG_ERROR(
DC_LOG_ERROR(
DC_LOG_ERROR(
DC_LOG_ERROR("%s: Failed to execute VBIOS command table for DAC!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n", __func__);
DC_LOG_ERROR("Timing Sync not supported on underlay pipe\n");
DC_LOG_ERROR("Timing Sync not supported on underlay pipe\n");
DC_LOG_ERROR("Timing Sync not supported on underlay pipe\n");
DC_LOG_ERROR("Timing Sync not supported on underlay pipe\n");
DC_LOG_ERROR("Timing Sync not supported on underlay pipe\n");
DC_LOG_ERROR("Index out of bounds: i=%d, TRANSFER_FUNC_POINTS=%d\n",
DC_LOG_ERROR("%s: No supported link rate found %X!\n",
DC_LOG_ERROR("Losing delta precision while programming shaper LUT.");
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n", __func__);
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: No supported link rate found %X!\n",
DC_LOG_ERROR("%s: Failed to execute DPIA enable DMUB command.\n", __func__);
DC_LOG_ERROR("%s: Failed to execute DPIA enable DMUB command.\n", __func__);
DC_LOG_ERROR("%s: USB4 DPIA only supports DisplayPort.\n", __func__);
DC_LOG_ERROR("%s: Failed to execute DPIA enable DMUB command.\n", __func__);
DC_LOG_ERROR("%s: Invalid message_info msg_id - %d\n", __func__, message_info->msg_id);
DC_LOG_ERROR("%s: KsvFifo Size(%d) is not a multiple of HDCP14_KSV_SIZE(%d)\n",
DC_LOG_ERROR("%s: KsvFifo Size(%d) is greater than HDCP14_MAX_KSV_FIFO_SIZE(%d)\n",
DC_LOG_ERROR("%s: Reading %d Ksv(s) from KsvFifo\n",
DC_LOG_ERROR("%s: Invalid message_info msg_id - %d\n", __func__, message_info->msg_id);
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR("%s: Failed to execute VBIOS command table!\n",
DC_LOG_ERROR(
DC_LOG_ERROR("%s: program_3dlut failed\n", __func__);
DC_LOG_ERROR("%s: program_shaper failed\n", __func__);
DC_LOG_ERROR("%s: set_output_gamma function pointer is NULL.\n", __func__);
DC_LOG_ERROR("%s: program_3dlut failed\n", __func__);
DC_LOG_ERROR("%s: program_shaper failed\n", __func__);
DC_LOG_ERROR("%s: called for non-implemented irq source, src_id=%u, ext_id=%u\n",
DC_LOG_ERROR("%s: called for non-implemented irq source, src_id=%u, ext_id=%u\n",
DC_LOG_ERROR("%s: cannot find irq info table entry for %d\n",
DC_LOG_ERROR("%s: cannot find irq info table entry for %d\n",
DC_LOG_ERROR("%s: Invalid test link rate.", __func__);
DC_LOG_ERROR("%s: Color space must be defined for test pattern", __func__);
DC_LOG_ERROR("%s: link encoder does not support enable_dpia_output\n", __func__);
DC_LOG_ERROR("%s: link encoder does not support disable_dpia_output\n", __func__);
DC_LOG_ERROR("%s: invalid hpo_dp_link_enc\n", __func__);
DC_LOG_ERROR("%s: invalid hpo_dp_link_enc\n", __func__);
DC_LOG_ERROR("EDID checksum invalid.\n");
DC_LOG_ERROR("Partial EDID valid, abandon invalid blocks.\n");
DC_LOG_ERROR("No EDID read.\n");
DC_LOG_ERROR("SST Update Payload: Link loss occurred while "
DC_LOG_ERROR("SST Update Payload: ACT still not handled after retries, "
DC_LOG_ERROR("Failure: unknown encoding format\n");
DC_LOG_ERROR("Failure: pbn_per_slot==0 not allowed. Cannot continue, returning DC_UNSUPPORTED_VALUE.\n");
DC_LOG_ERROR("SST Update Payload: Unable to read DPCD revision "
DC_LOG_ERROR("SST Update Payload: Payload table not updated after retries, "
DC_LOG_ERROR("SST Update Payload: Failed to update "
DC_LOG_ERROR("Failure: unknown encoding format\n");
DC_LOG_ERROR("Failure: unknown encoding format\n");
DC_LOG_ERROR("lttpr_caps phy_repeater_cnt is 0x%x, forcing it to 0x80.",
DC_LOG_ERROR("%s:%d: core_link_read_dpcd (DP_FEC_CAPABILITY) failed\n", __func__, __LINE__);
DC_LOG_ERROR("%s:%d: core_link_read_dpcd (DP_DSC_BRANCH_OVERALL_THROUGHPUT_0) failed\n", __func__, __LINE__);
DC_LOG_ERROR("%s: Could not return max link encoder caps", __func__);
DC_LOG_ERROR("%s: Max link encoder caps unknown", __func__);
DC_LOG_ERROR("LTTPR count is nonzero but invalid lane count reported. Assuming no LTTPR present.\n");
DC_LOG_ERROR("%s: for link(%d) dpia(%d) failed with status(%d), current_hpd_status(%d) new_hpd_status(0)\n",
DC_LOG_ERROR("%s: Link[%d]: bw_granularity is zero!", __func__, link->link_index);
DC_LOG_ERROR("%s: Link[%d]: Request BW (%d --> %d) > Estimated BW (%d)... Set to Estimated BW!",
DC_LOG_ERROR("%s:%d: core_link_write_dpcd (DP_DOWNSPREAD_CTRL) failed\n", __func__, __LINE__);
DC_LOG_ERROR("%s:%d: core_link_write_dpcd (DP_LANE_COUNT_SET) failed\n", __func__, __LINE__);
DC_LOG_ERROR("%s:%d: core_link_write_dpcd (DP_LINK_BW_SET) failed\n", __func__, __LINE__);
DC_LOG_ERROR("%s:%d: core_link_write_dpcd (DP_LINK_RATE_SET) failed\n", __func__, __LINE__);
DC_LOG_ERROR("%s:%d: core_link_write_dpcd (DP_LINK_BW_SET) failed\n", __func__, __LINE__);
DC_LOG_ERROR("%s: Link Training Error, could not get CR after %d tries. Possibly voltage swing issue",
DC_LOG_ERROR("%s: Link Training Error, could not get CR after %d tries. Possibly voltage swing issue",
DC_LOG_ERROR("%s: not valid soc bounding box\n", __func__);
DC_LOG_ERROR("%s: not valid soc bounding box\n", __func__);
DC_LOG_ERROR("%s: not valid soc bounding box\n", __func__);
DC_LOG_ERROR("%s: not valid soc bounding box/n", __func__);
DC_LOG_ERROR(__VA_ARGS__); \