xhci_warn
xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
xhci_warn(xhci, "slot_id is zero\n");
xhci_warn(xhci, "Can't set compliance mode when port is connected\n");
xhci_warn(xhci, "Cannot set port %d-%d link state %d\n",
xhci_warn(xhci, "port %d-%d resume PLC timeout\n",
xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
xhci_warn(xhci, "Port resume timed out, port %d-%d: 0x%x\n",
xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
xhci_warn(xhci, "WARN: Didn't find a matching TT\n");
xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr.\n");
xhci_warn(xhci, "Ignoring unknown port speed, Ext Cap %p, revision = 0x%x\n",
xhci_warn(xhci, "Duplicate port entry, Ext Cap %p, port %u\n", addr, i);
xhci_warn(xhci, "Port was marked as USB %u, duplicated as USB %u\n",
xhci_warn(xhci, "No ports on the roothubs?\n");
xhci_warn(xhci, "Failed to allocate interrupter event ring\n");
xhci_warn(xhci, "Failed to allocate interrupter erst\n");
xhci_warn(xhci, "Failed to add secondary interrupter, max interrupters %d\n",
xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
xhci_warn(xhci, "WARN Cancelled URB %p has invalid stream ID %u.\n",
xhci_warn(xhci,
xhci_warn(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
xhci_warn(xhci, "Stop endpoint command completion for disabled slot %u\n",
xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n");
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n");
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n",
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n",
xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n");
xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
xhci_warn(xhci, "Could not get input context, bad type.\n");
xhci_warn(xhci, "Reset device command completion for disabled slot %u\n",
xhci_warn(xhci, "WARN NEC_GET_FW command on non-NEC host\n");
xhci_warn(xhci, "xHCI host not responding to stop endpoint command\n");
xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
xhci_warn(xhci,
xhci_warn(xhci, "Device Notification event for "
xhci_warn(xhci,
xhci_warn(xhci, "Port change event with invalid port ID %d\n",
xhci_warn(xhci, "Port change event, no port for port ID %u\n",
xhci_warn(xhci, "xHC is not running.\n");
xhci_warn(xhci, "Missing link TRB at end of segment\n");
xhci_warn(xhci, "Ring is an endless link TRB loop\n");
xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
xhci_warn(xhci, "WARN Successful completion on short TX\n");
xhci_warn(xhci, "bad transfer trb length %d in event trb\n",
xhci_warn(xhci, "Link TRB loop at enqueue\n");
xhci_warn(xhci,
xhci_warn(xhci,
xhci_warn(xhci,
xhci_warn(xhci,
xhci_warn(xhci,
xhci_warn(xhci,
xhci_warn(xhci, "Event TRB for slot %u ep %u with no TDs queued\n",
xhci_warn(xhci, "ERROR unknown event type %d\n", trb_type);
xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n");
xhci_warn(xhci, "WARNING: Host Controller Error\n");
xhci_warn(xhci, "WARNING: Host System Error\n");
xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
xhci_warn(xhci, "Missing link TRB at end of ring segment\n");
xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n",
xhci_warn(xhci, "Failed mapping bounce buffer, not aligning\n");
xhci_warn(xhci, "Frame ID %d (reg %d, index %d) beyond range (%d, %d)\n",
xhci_warn(xhci, "Ignore frame ID field, use SIA bit instead\n");
xhci_warn(xhci, "Can't queue command, xHC not accessible\n");
xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
xhci_warn(xhci, "Invalid endpoint index %u\n", ep_index);
xhci_warn(xhci, "No xhci virt device for slot_id %u\n", slot_id);
xhci_warn(xhci, "Invalid stream_id %u request for slot_id %u ep_index %u\n",
xhci_warn(xhci, "WARN can't find new dequeue, invalid stream ID %u\n",
xhci_warn(xhci, "Can't find dma of new dequeue ptr\n");
xhci_warn(xhci, "deq seg = %p, deq ptr = %p\n", new_seg, new_deq);
xhci_warn(xhci, "Set TR Deq already pending, don't submit for %pad\n",
xhci_warn(xhci, "Can't alloc Set TR Deq cmd %pad\n", &addr);
xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
xhci_warn(xhci, "URB req %u and actual %u transfer length mismatch\n",
xhci_warn(xhci, "XHCI sideband for slot %d already in use\n",
xhci_warn(xhci, "Clearing Run/Stop bit failed %d\n", err);
xhci_warn(xhci, "Controller Save State failed %d\n", err);
xhci_warn(xhci, "Controller Save State failed, USBSTS 0x%08x\n", usbsts);
xhci_warn(xhci, "Suspend Save Error (SRE), USBSTS 0x%08x\n", usbsts);
xhci_warn(xhci, "Controller not ready at resume %d\n",
xhci_warn(xhci, "WARN: xHC restore state timeout\n");
xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
xhci_warn(xhci, "Host halt failed, %d\n", ret);
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "WARN: Can't enqueue URB, ep in streams transition state %x\n",
xhci_warn(xhci, "Can't enqueue URB while manually clearing toggle\n");
xhci_warn(xhci, "Host not accessible, reset failed.\n");
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "Trying to add endpoint 0x%x "
xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n");
xhci_warn(xhci, "Timeout while waiting for evaluate context command\n");
xhci_warn(xhci, "Not enough bandwidth on HS bus for "
xhci_warn(xhci, "Not enough bandwidth. "
xhci_warn(xhci, "Not enough bandwidth. Proposed: %u, Max: %u\n",
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "Not enough host resources, "
xhci_warn(xhci, "Not enough bandwidth\n");
xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on set_interface, freeing streams.\n",
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x "
xhci_warn(xhci, "Send email to xHCI maintainer and ask for "
xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk "
xhci_warn(xhci, "WARN Can't disable streams for "
xhci_warn(xhci, "WARN Can't disable streams for "
xhci_warn(xhci, "WARN xhci_free_streams() called "
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "WARN: endpoints can't handle "
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "Timeout waiting for reset device command\n");
xhci_warn(xhci, "Unknown completion code %u for "
xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on device reset, freeing streams.\n",
xhci_warn(xhci, "Unsuccessful disable slot %u command, status %d\n",
xhci_warn(xhci, "Not enough host resources, "
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "Timeout while waiting for setup device command\n");
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "Invalid page size register = 0x%x\n", page_size);
xhci_warn(xhci, "Cannot update hub desc for unknown device.\n");
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
xhci_warn(xhci, "Suspending and stopping xHC with pending command!\n");