drivers/usb/host/xhci-dbg.c

31

xhci_dbg(xhci, "%pV\n", &vaf);

drivers/usb/host/xhci-hub.c

1000

xhci_dbg(xhci, "slot_id is zero\n");

drivers/usb/host/xhci-hub.c

1243

xhci_dbg(xhci, "Wrong hub descriptor type for "

drivers/usb/host/xhci-hub.c

1278

xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x",

drivers/usb/host/xhci-hub.c

1364

xhci_dbg(xhci, "Disable port %d-%d\n",

drivers/usb/host/xhci-hub.c

1381

xhci_dbg(xhci, "Enable port %d-%d\n",

drivers/usb/host/xhci-hub.c

1404

xhci_dbg(xhci, "CTC flag is 0, port already supports entering compliance mode\n");

drivers/usb/host/xhci-hub.c

1413

xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n",

drivers/usb/host/xhci-hub.c

1462

xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",

drivers/usb/host/xhci-hub.c

1506

xhci_dbg(xhci, "set port reset, actual port %d-%d status = 0x%x\n",

drivers/usb/host/xhci-hub.c

1512

xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status = 0x%x\n",

drivers/usb/host/xhci-hub.c

1570

xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");

drivers/usb/host/xhci-hub.c

1571

xhci_dbg(xhci, "PORTSC %04x\n", temp);

drivers/usb/host/xhci-hub.c

1591

xhci_dbg(xhci, "slot_id is zero\n");

drivers/usb/host/xhci-hub.c

1705

xhci_dbg(xhci, "%s: stopping usb%d port polling\n",

drivers/usb/host/xhci-hub.c

1738

xhci_dbg(xhci, "usb%d bus suspend to fail because a port is resuming\n",

drivers/usb/host/xhci-hub.c

1766

xhci_dbg(xhci, "port %d-%d polling in bus suspend, waiting\n",

drivers/usb/host/xhci-hub.c

1774

xhci_dbg(xhci, "Bus suspend bailout, port over-current detected\n");

drivers/usb/host/xhci-hub.c

1782

xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");

drivers/usb/host/xhci-hub.c

1785

xhci_dbg(xhci, "port %d-%d not suspended\n",

drivers/usb/host/xhci-hub.c

1920

xhci_dbg(xhci, "reset stuck port %d-%d\n",

drivers/usb/host/xhci-hub.c

559

xhci_dbg(xhci, "Ignoring request to disable SuperSpeed port.\n");

drivers/usb/host/xhci-hub.c

564

xhci_dbg(xhci,

drivers/usb/host/xhci-hub.c

576

xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n",

drivers/usb/host/xhci-hub.c

627

xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n",

drivers/usb/host/xhci-hub.c

655

xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n",

drivers/usb/host/xhci-hub.c

701

xhci_dbg(xhci, "Disable all slots\n");

drivers/usb/host/xhci-hub.c

714

xhci_dbg(xhci, "Disable all port (PP = 0)\n");

drivers/usb/host/xhci-hub.c

722

xhci_dbg(xhci, "Stop controller\n");

drivers/usb/host/xhci-hub.c

730

xhci_dbg(xhci, "Enter Test Mode: %d, Port_id=%d\n",

drivers/usb/host/xhci-hub.c

810

xhci_dbg(xhci, "Set port %d-%d link state, portsc: 0x%x, write 0x%x",

drivers/usb/host/xhci-hub.c

980

xhci_dbg(xhci, "resume USB2 port %d-%d\n",

drivers/usb/host/xhci-mem.c

1018

xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",

drivers/usb/host/xhci-mem.c

1144

xhci_dbg(xhci, "Slot ID %d: HW portnum %d, hcd portnum %d\n",

drivers/usb/host/xhci-mem.c

1184

xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);

drivers/usb/host/xhci-mem.c

1185

xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);

drivers/usb/host/xhci-mem.c

1877

xhci_dbg(xhci, "Invalid secondary interrupter, can't remove\n");

drivers/usb/host/xhci-mem.c

2101

xhci_dbg(xhci, "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\n",

drivers/usb/host/xhci-mem.c

2394

xhci_dbg(xhci, "Add secondary interrupter %d, max interrupters %d\n",

drivers/usb/host/xhci-mem.c

622

xhci_dbg(xhci, "Allocating %u streams and %u stream context array entries.\n",

drivers/usb/host/xhci-mem.c

625

xhci_dbg(xhci, "Command ring has no reserved TRBs available\n");

drivers/usb/host/xhci-mem.c

679

xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n", cur_stream, addr);

drivers/usb/host/xhci-mem.c

806

xhci_dbg(xhci, "Bad rhub port.\n");

drivers/usb/host/xhci-mem.c

904

xhci_dbg(xhci, "Slot %u endpoint %u not removed from BW list!\n",

drivers/usb/host/xhci-mem.c

945

xhci_dbg(xhci, "Bad rhub port.\n");

drivers/usb/host/xhci-mem.c

991

xhci_dbg(xhci, "Slot %d output ctx = 0x%pad (dma)\n", slot_id, &dev->out_ctx->dma);

drivers/usb/host/xhci-mem.c

998

xhci_dbg(xhci, "Slot %d input ctx = 0x%pad (dma)\n", slot_id, &dev->in_ctx->dma);

drivers/usb/host/xhci-mtk-sch.c

1001

xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n",

drivers/usb/host/xhci-mtk-sch.c

1019

xhci_dbg(xhci, "%s() udev %s\n", __func__, dev_name(&udev->dev));

drivers/usb/host/xhci-mtk-sch.c

936

xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));

drivers/usb/host/xhci-mtk-sch.c

961

xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));

drivers/usb/host/xhci-mtk-sch.c

980

xhci_dbg(xhci, "%s() udev %s\n", __func__, dev_name(&udev->dev));

drivers/usb/host/xhci-mtk.c

746

xhci_dbg(xhci, "%s: stop port polling\n", __func__);

drivers/usb/host/xhci-mtk.c

763

xhci_dbg(xhci, "%s: restart port polling\n", __func__);

drivers/usb/host/xhci-mtk.c

790

xhci_dbg(xhci, "%s: restart port polling\n", __func__);

drivers/usb/host/xhci-pci.c

245

xhci_dbg(xhci, "MWI active\n");

drivers/usb/host/xhci-pci.c

247

xhci_dbg(xhci, "Finished xhci_pci_reinit\n");

drivers/usb/host/xhci-pci.c

591

xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int)sbrn);

drivers/usb/host/xhci-pci.c

919

xhci_dbg(xhci, "port %d-%d in U3 without wakeup, disable it\n",

drivers/usb/host/xhci-ring.c

1009

xhci_dbg(xhci, "Reset ep command for ep_index %d already pending\n",

drivers/usb/host/xhci-ring.c

1088

xhci_dbg(xhci,

drivers/usb/host/xhci-ring.c

1227

xhci_dbg(xhci, "Stop ep completion raced with stall\n");

drivers/usb/host/xhci-ring.c

1245

xhci_dbg(xhci, "Stop ep completion resetting ep, status %d\n", err);

drivers/usb/host/xhci-ring.c

1280

xhci_dbg(xhci, "Stop ep completion ctx error, ctx_state %d\n",

drivers/usb/host/xhci-ring.c

1527

xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",

drivers/usb/host/xhci-ring.c

1531

xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",

drivers/usb/host/xhci-ring.c

1542

xhci_dbg(ep->xhci, "%s: Pending TDs to clear, continuing with invalidation\n",

drivers/usb/host/xhci-ring.c

1551

xhci_dbg(ep->xhci, "%s: All TDs cleared, ring doorbell\n", __func__);

drivers/usb/host/xhci-ring.c

1680

xhci_dbg(xhci, "Completed reset device command.\n");

drivers/usb/host/xhci-ring.c

1741

xhci_dbg(xhci, "Command timeout, USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));

drivers/usb/host/xhci-ring.c

1773

xhci_dbg(xhci, "Command timeout\n");

drivers/usb/host/xhci-ring.c

1780

xhci_dbg(xhci, "host removed, ring start fail?\n");

drivers/usb/host/xhci-ring.c

1787

xhci_dbg(xhci, "Command timeout on stopped ring\n");

drivers/usb/host/xhci-ring.c

1938

xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);

drivers/usb/host/xhci-ring.c

1956

xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",

drivers/usb/host/xhci-ring.c

2029

xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n");

drivers/usb/host/xhci-ring.c

2039

xhci_dbg(xhci, "Port change event, %d-%d, id %d, portsc: 0x%x\n",

drivers/usb/host/xhci-ring.c

2045

xhci_dbg(xhci, "resume root hub\n");

drivers/usb/host/xhci-ring.c

2057

xhci_dbg(xhci, "port resume event for port %d\n", port_id);

drivers/usb/host/xhci-ring.c

2066

xhci_dbg(xhci, "remote wake SS port %d\n", port_id);

drivers/usb/host/xhci-ring.c

2081

xhci_dbg(xhci, "resume HS port %d\n", port_id);

drivers/usb/host/xhci-ring.c

2102

xhci_dbg(xhci, "resume SS port %d finished\n", port_id);

drivers/usb/host/xhci-ring.c

2157

xhci_dbg(xhci, "%s: starting usb%d port polling.\n",

drivers/usb/host/xhci-ring.c

2226

xhci_dbg(xhci, "Vendor defined info completion code %u\n",

drivers/usb/host/xhci-ring.c

2228

xhci_dbg(xhci, "Treating code as success.\n");

drivers/usb/host/xhci-ring.c

2349

xhci_dbg(xhci, "TRB error %u, halted endpoint index = %u\n",

drivers/usb/host/xhci-ring.c

2373

xhci_dbg(xhci, "Waiting for status stage event\n");

drivers/usb/host/xhci-ring.c

2488

xhci_dbg(xhci, "Error mid isoc TD, wait for final completion event\n");

drivers/usb/host/xhci-ring.c

2538

xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",

drivers/usb/host/xhci-ring.c

2594

xhci_dbg(xhci, "Stream transaction error ep %u no id\n", ep->ep_index);

drivers/usb/host/xhci-ring.c

2684

xhci_dbg(xhci, "Successful completion on short TX for slot %u ep %u with last td comp code %d\n",

drivers/usb/host/xhci-ring.c

2692

xhci_dbg(xhci, "Stopped on Transfer TRB for slot %u ep %u\n",

drivers/usb/host/xhci-ring.c

2696

xhci_dbg(xhci,

drivers/usb/host/xhci-ring.c

2701

xhci_dbg(xhci,

drivers/usb/host/xhci-ring.c

2707

xhci_dbg(xhci, "Stalled endpoint for slot %u ep %u\n", slot_id,

drivers/usb/host/xhci-ring.c

2712

xhci_dbg(xhci, "Split transaction error for slot %u ep %u\n",

drivers/usb/host/xhci-ring.c

2717

xhci_dbg(xhci, "Transfer error for slot %u ep %u on endpoint\n",

drivers/usb/host/xhci-ring.c

2722

xhci_dbg(xhci, "Babble error for slot %u ep %u on endpoint\n",

drivers/usb/host/xhci-ring.c

2756

xhci_dbg(xhci, "Underrun event on slot %u ep %u\n", slot_id, ep_index);

drivers/usb/host/xhci-ring.c

2760

xhci_dbg(xhci, "Overrun event on slot %u ep %u\n", slot_id, ep_index);

drivers/usb/host/xhci-ring.c

2771

xhci_dbg(xhci,

drivers/usb/host/xhci-ring.c

2777

xhci_dbg(xhci,

drivers/usb/host/xhci-ring.c

2818

xhci_dbg(xhci, "Missing TD completion event after mid TD error\n");

drivers/usb/host/xhci-ring.c

2867

xhci_dbg(xhci, "Skipped one TD for slot %u ep %u",

drivers/usb/host/xhci-ring.c

2874

xhci_dbg(xhci, "All TDs skipped for slot %u ep %u. Clear skip flag.\n",

drivers/usb/host/xhci-ring.c

2902

xhci_dbg(xhci, "Spurious event dma %pad, comp_code %u after %u\n",

drivers/usb/host/xhci-ring.c

2913

xhci_dbg(xhci,

drivers/usb/host/xhci-ring.c

3026

xhci_dbg(xhci, "xHCI host dying, returning from event handler.\n");

drivers/usb/host/xhci-ring.c

3103

xhci_dbg(xhci, "xHCI dying, ignoring interrupt. Shouldn't IRQs be disabled?\n");

drivers/usb/host/xhci-ring.c

3283

xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");

drivers/usb/host/xhci-ring.c

3343

xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",

drivers/usb/host/xhci-ring.c

3557

xhci_dbg(xhci, "Unaligned %d bytes, buff len %d\n",

drivers/usb/host/xhci-ring.c

3563

xhci_dbg(xhci, "split align, new buff len %d\n", *trb_buff_len);

drivers/usb/host/xhci-ring.c

3605

xhci_dbg(xhci, "Bounce align, new buff len %d\n", *trb_buff_len);

drivers/usb/host/xhci-ring.c

4102

xhci_dbg(xhci, "Isoc URB with zero packets?\n");

drivers/usb/host/xhci-ring.c

411

xhci_dbg(xhci, "Adding %d trbs requires expanding ring by %d segments\n",

drivers/usb/host/xhci-ring.c

427

xhci_dbg(xhci, "// Ding dong!\n");

drivers/usb/host/xhci-ring.c

4361

xhci_dbg(xhci, "xHCI dying or halted, can't queue_command. state: 0x%x\n",

drivers/usb/host/xhci-ring.c

466

xhci_dbg(xhci, "Turn aborted command %p to no-op\n",

drivers/usb/host/xhci-ring.c

497

xhci_dbg(xhci, "Abort command ring\n");

drivers/usb/host/xhci-ring.c

541

xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");

drivers/usb/host/xhci-ring.c

914

xhci_dbg(xhci, "Giveback URB %p, len = %d, expected = %d, status = %d\n",

drivers/usb/host/xhci-ring.c

948

xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",

drivers/usb/host/xhci-ring.c

952

xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",

drivers/usb/host/xhci-ring.c

972

xhci_dbg(xhci, "%s-reset ep %u, slot %u\n",

drivers/usb/host/xhci.c

1169

xhci_dbg(xhci, "Stop HCD\n");

drivers/usb/host/xhci.c

1180

xhci_dbg(xhci, "// Disabling event ring interrupts\n");

drivers/usb/host/xhci.c

1185

xhci_dbg(xhci, "cleaning up memory\n");

drivers/usb/host/xhci.c

1188

xhci_dbg(xhci, "xhci_stop completed - status = %x\n",

drivers/usb/host/xhci.c

1195

xhci_dbg(xhci, "Initialize the xhci_hcd\n");

drivers/usb/host/xhci.c

1201

xhci_dbg(xhci, "Start the primary HCD\n");

drivers/usb/host/xhci.c

1204

xhci_dbg(xhci, "Start the secondary HCD\n");

drivers/usb/host/xhci.c

1282

xhci_dbg(xhci, "%s: starting usb%d port polling.\n",

drivers/usb/host/xhci.c

1397

xhci_dbg(hcd_to_xhci(hcd),

drivers/usb/host/xhci.c

1520

xhci_dbg(xhci, "xHCI %s called with unaddressed device\n",

drivers/usb/host/xhci.c

1527

xhci_dbg(xhci, "xHCI %s called with udev and "

drivers/usb/host/xhci.c

1671

xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");

drivers/usb/host/xhci.c

1677

xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\n",

drivers/usb/host/xhci.c

1852

xhci_dbg(xhci, "Not queuing Stop Endpoint on slot %d ep %d in state 0x%x\n",

drivers/usb/host/xhci.c

1860

xhci_dbg(xhci, "Invalidating TDs instantly on slot %d ep %d in state 0x%x\n",

drivers/usb/host/xhci.c

1921

xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);

drivers/usb/host/xhci.c

1924

xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",

drivers/usb/host/xhci.c

1963

xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",

drivers/usb/host/xhci.c

2014

xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",

drivers/usb/host/xhci.c

2077

xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",

drivers/usb/host/xhci.c

3098

xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);

drivers/usb/host/xhci.c

3190

xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);

drivers/usb/host/xhci.c

3285

xhci_dbg(xhci, "endpoint disable with ep_state 0x%x\n",

drivers/usb/host/xhci.c

3404

xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",

drivers/usb/host/xhci.c

3435

xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",

drivers/usb/host/xhci.c

344

xhci_dbg(xhci, "%s: Interrupt pending\n", __func__);

drivers/usb/host/xhci.c

3509

xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",

drivers/usb/host/xhci.c

3538

xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",

drivers/usb/host/xhci.c

3632

xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",

drivers/usb/host/xhci.c

3638

xhci_dbg(xhci, "xHCI controller does not support streams.\n");

drivers/usb/host/xhci.c

3688

xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",

drivers/usb/host/xhci.c

3739

xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",

drivers/usb/host/xhci.c

3929

xhci_dbg(xhci, "The device to be reset with slot ID %u does "

drivers/usb/host/xhci.c

3946

xhci_dbg(xhci, "The device to be reset with slot ID %u does "

drivers/usb/host/xhci.c

3980

xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);

drivers/usb/host/xhci.c

3989

xhci_dbg(xhci, "Couldn't allocate command structure.\n");

drivers/usb/host/xhci.c

3998

xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");

drivers/usb/host/xhci.c

4021

xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n",

drivers/usb/host/xhci.c

4024

xhci_dbg(xhci, "Not freeing device rings.\n");

drivers/usb/host/xhci.c

4030

xhci_dbg(xhci, "Successful reset device command.\n");

drivers/usb/host/xhci.c

4228

xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");

drivers/usb/host/xhci.c

4350

xhci_dbg(xhci, "Slot already in default state\n");

drivers/usb/host/xhci.c

4680

xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",

drivers/usb/host/xhci.c

5291

xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");

drivers/usb/host/xhci.c

5312

xhci_dbg(xhci, "xHCI version %x needs hub "

drivers/usb/host/xhci.c

5330

xhci_dbg(xhci, "xHCI version %x doesn't need hub "

drivers/usb/host/xhci.c

5337

xhci_dbg(xhci, "Set up %s for hub device.\n",

drivers/usb/host/xhci.c

5478

xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits");

drivers/usb/host/xhci.c

5489

xhci_dbg(xhci, "Resetting HCD\n");

drivers/usb/host/xhci.c

5494

xhci_dbg(xhci, "Reset complete\n");

drivers/usb/host/xhci.c

5510

xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");

drivers/usb/host/xhci.c

5520

xhci_dbg(xhci, "Enabling 32-bit DMA addresses.\n");

drivers/usb/host/xhci.c

5524

xhci_dbg(xhci, "Calling HCD init\n");

drivers/usb/host/xhci.c

5529

xhci_dbg(xhci, "Called HCD init\n");

drivers/usb/host/xhci.c

774

xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",

drivers/usb/host/xhci.c

920

xhci_dbg(xhci, "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\n",

drivers/usb/host/xhci.c

993

xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",