speed_t
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
static const u16 speed_t[5] = {
pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
speed_t desired_speed;
speed_t curr_speed;
speed_t speed;
speed_t speed;
speed_t baud;
static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
speed_t max;
speed_t baud)
static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
speed_t max_baud;
speed_t max_baud;
static int mxser_set_baud(struct tty_struct *tty, speed_t newspd)
speed_t baud = tty_termios_baud_rate(old_termios);
speed_t baud;
(speed_t)tdiv64, (speed_t)tdiv64);
speed_t tty_termios_input_baud_rate(const struct ktermios *termios);
speed_t ibaud, speed_t obaud)
static const speed_t baud_table[] = {
void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
speed_t tty_termios_baud_rate(const struct ktermios *termios)
speed_t tty_termios_input_baud_rate(const struct ktermios *termios)
speed_t baud;
static const speed_t ch341_min_rates[] = {
static int ch341_get_divisor(struct ch341_private *priv, speed_t speed)
speed_t baud_rate, u8 lcr)
static speed_t cp210x_get_actual_rate(speed_t baud)
speed_t min = 300;
speed_t max;
speed_t min_speed;
speed_t max_speed;
speed_t rate;
speed_t high;
static speed_t cp210x_get_an205_rate(speed_t baud)
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
struct usb_serial_port *port, speed_t baud_rate, int data_bits,
speed_t baud;
speed_t baud_base;
static int calc_baud_divisor(speed_t baudrate, speed_t clockrate)
static int f81232_find_clk(speed_t baudrate)
struct usb_serial_port *port, speed_t baudrate,
speed_t old_baudrate)
speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE };
speed_t baudrate;
speed_t old_baud;
speed_t force_baud; /* if non-zero, force the baud rate to
speed_t baud;
static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
speed_t speed;
speed_t baud;
speed_t speed;
speed_t value, speed_t *result)
struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
speed_t speed;
speed_t value, speed_t *result);
speed_t max_baud_rate;
static speed_t pl2303_get_supported_baud_rate(speed_t baud)
static const speed_t baud_sup[] = {
static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4],
speed_t baud)
static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4],
speed_t baud)
static speed_t pl2303_encode_baud_rate_divisor_alt(unsigned char buf[4],
speed_t baud)
speed_t baud_sup;
speed_t baud;
baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
static speed_t upd78f0730_get_baud_rate(struct tty_struct *tty)
const speed_t baud_rate = tty_get_baud_rate(tty);
static const speed_t supported[] = {
speed_t baud_rate;
speed_t baud;
speed_t tty_termios_baud_rate(const struct ktermios *termios);
void tty_termios_encode_baud_rate(struct ktermios *termios, speed_t ibaud,
speed_t obaud);
void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud,
speed_t obaud);
static inline speed_t tty_get_baud_rate(const struct tty_struct *tty)
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */
speed_t c_ispeed; /* input speed */
speed_t c_ospeed; /* output speed */