arch/alpha/kernel/irq_alpha.c

224

pr_err("Failed to register timer interrupt\n");

arch/alpha/kernel/irq_i8259.c

95

pr_err("Failed to request irq 2 (cascade)\n");

arch/alpha/kernel/irq_pyxis.c

111

pr_err("Failed to register isa-cascade interrupt\n");

arch/alpha/kernel/sys_alcor.c

136

pr_err("Failed to register isa-cascade interrupt\n");

arch/alpha/kernel/sys_cabriolet.c

112

pr_err("Failed to register isa-cascade interrupt\n");

arch/alpha/kernel/sys_miata.c

84

pr_err("Failed to register halt-switch interrupt\n");

arch/alpha/kernel/sys_miata.c

86

pr_err("Failed to register timer-cascade interrupt\n");

arch/alpha/kernel/sys_ruffian.c

85

pr_err("Failed to request irq 0 (timer)\n");

arch/alpha/kernel/sys_rx164.c

109

pr_err("Failed to register isa-cascade interrupt\n");

arch/alpha/kernel/sys_sx164.c

57

pr_err("Failed to register timer-cascade interrupt\n");

arch/alpha/kernel/sys_wildfire.c

197

pr_err("Failed to register isa_enable interrupt\n");

arch/arc/kernel/jump_label.c

116

pr_err(SELFTEST_MSG "FAIL:\n arc_gen_branch(0x%08x, 0x%08x) != 0x%08x, got 0x%08x\n",

arch/arc/kernel/jump_label.c

13

pr_err(JUMPLABEL_ERR format); \

arch/arc/kernel/module.c

121

pr_err("%s: unknown relocation: %u\n",

arch/arc/kernel/perf_event.c

739

pr_err("This core does not have performance counters!\n");

arch/arc/kernel/process.c

282

pr_err("ELF not built for %s ISA\n",

arch/arc/kernel/process.c

289

pr_err("ABI mismatch - you need newer toolchain\n");

arch/arc/kernel/unaligned.c

258

pr_err("Alignment trap: fault in fix-up %08lx at [<%08lx>]\n",

arch/arc/net/bpf_jit_arcv2.c

2430

pr_err("FP is being saved while there is no frame.");

arch/arc/net/bpf_jit_arcv2.c

2457

pr_err("FP is being saved while there is no frame.");

arch/arc/net/bpf_jit_arcv2.c

2871

pr_err("64-bit jump condition is not known.");

arch/arc/net/bpf_jit_arcv2.c

2951

pr_err("32-bit jump condition is not known.");

arch/arc/net/bpf_jit_core.c

1032

pr_err("bpf-jit: can't handle instruction code 0x%02X\n", code);

arch/arc/net/bpf_jit_core.c

1119

pr_err("bpf-jit: could not allocate memory for "

arch/arc/net/bpf_jit_core.c

1138

pr_err("bpf-jit: could not allocate memory for translation.\n");

arch/arc/net/bpf_jit_core.c

1206

pr_err("bpf-jit: divergence between the phases; "

arch/arc/net/bpf_jit_core.c

1236

pr_err("bpf-jit: Could not lock the JIT memory.\n");

arch/arc/net/bpf_jit_core.c

1279

pr_err("bpf-jit: no jit data for the extra pass.\n");

arch/arc/net/bpf_jit_core.c

272

pr_err("bpf-jit: inconsistence state; no "

arch/arc/net/bpf_jit_core.c

276

pr_err("bpf-jit: estimated JIT length is less "

arch/arc/net/bpf_jit_core.c

413

pr_err("bpf-jit: invalid size for swap.\n");

arch/arc/net/bpf_jit_core.c

474

pr_err("bpf-jit: can't handle condition 0x%02X\n", op);

arch/arc/net/bpf_jit_core.c

496

pr_err("bpf-jit: not a jump instruction.\n");

arch/arc/net/bpf_jit_core.c

501

pr_err("bpf-jit: the bpf jump insn is not in prog.\n");

arch/arc/net/bpf_jit_core.c

506

pr_err("bpf-jit: bpf jump label is out of range.\n");

arch/arc/net/bpf_jit_core.c

564

pr_err("bpf-jit: the JIT displacement is not OK.\n");

arch/arc/net/bpf_jit_core.c

654

pr_err("bpf-jit: epilogue offset is not valid.\n");

arch/arc/net/bpf_jit_core.c

678

pr_err("bpf-jit: can't get the address for call.\n");

arch/arc/net/bpf_jit_core.c

712

pr_err("bpf-jit: need more data for 64-bit immediate.\n");

arch/arc/plat-hsdk/platform.c

120

pr_err("failed to tweak %s to %scoherent\n", path, coherent ? "" : "non");

arch/arm/common/bL_switcher.c

190

pr_err("%s: mcpm_cpu_power_up() returned %d\n", __func__, ret);

arch/arm/common/bL_switcher.c

254

pr_err("%s exiting with error %d\n", __func__, ret);

arch/arm/common/bL_switcher.c

313

pr_err("%s failed for CPU %d\n", __func__, cpu);

arch/arm/common/bL_switcher.c

347

pr_err("%s: cpu %d out of bounds\n", __func__, cpu);

arch/arm/common/bL_switcher.c

400

pr_err("%s: notifier chain failed with status 0x%x\n",

arch/arm/common/bL_switcher.c

429

pr_err("%s: only dual cluster systems are supported\n", __func__);

arch/arm/common/bL_switcher.c

437

pr_err("%s: no CPU pairing possible\n", __func__);

arch/arm/common/bL_switcher.c

488

pr_err("%s: bad GIC ID for CPU %d\n", __func__, i);

arch/arm/common/bL_switcher.c

783

pr_err("bL_switcher: Failed to allocate a hotplug state\n");

arch/arm/common/bL_switcher.c

795

pr_err("%s: unable to create sysfs entry\n", __func__);

arch/arm/common/mcpm_entry.c

415

pr_err("%s returned %d\n", __func__, ret);

arch/arm/common/sa1111.c

301

pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",

arch/arm/kernel/atags_proc.c

72

pr_err("Exporting ATAGs: not enough memory\n");

arch/arm/kernel/bios32.c

418

pr_err("PCI: unable to allocate I/O port region (%d)\n", ret);

arch/arm/kernel/dma.c

100

pr_err("dma%d: freeing active DMA\n", chan);

arch/arm/kernel/dma.c

111

pr_err("dma%d: trying to free free DMA\n", chan);

arch/arm/kernel/dma.c

115

pr_err("dma: trying to free DMA%d\n", chan);

arch/arm/kernel/dma.c

126

pr_err("dma%d: altering DMA SG while DMA active\n", chan);

arch/arm/kernel/dma.c

143

pr_err("dma%d: altering DMA address while DMA active\n", chan);

arch/arm/kernel/dma.c

160

pr_err("dma%d: altering DMA count while DMA active\n", chan);

arch/arm/kernel/dma.c

175

pr_err("dma%d: altering DMA mode while DMA active\n", chan);

arch/arm/kernel/dma.c

198

pr_err("dma%d: trying to enable free DMA\n", chan);

arch/arm/kernel/dma.c

219

pr_err("dma%d: trying to disable free DMA\n", chan);

arch/arm/kernel/dma.c

236

pr_err("dma%d: trying to set_dma_page\n", chan);

arch/arm/kernel/dma.c

79

pr_err("dma: trying to allocate DMA%d\n", chan);

arch/arm/kernel/fiq.c

129

pr_err("%s FIQ trying to release %s FIQ\n",

arch/arm/kernel/irq.c

145

pr_err("L2C: failed to init: %d\n", ret);

arch/arm/kernel/module-plts.c

231

pr_err("%s: module PLT section(s) missing\n", mod->name);

arch/arm/kernel/module-plts.c

235

pr_err("%s: module symtab section missing\n", mod->name);

arch/arm/kernel/module.c

100

pr_err("%s: section %u reloc %u: bad relocation sym offset\n",

arch/arm/kernel/module.c

109

pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n",

arch/arm/kernel/module.c

131

pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (ARM -> Thumb)\n",

arch/arm/kernel/module.c

157

pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",

arch/arm/kernel/module.c

184

pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",

arch/arm/kernel/module.c

261

pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",

arch/arm/kernel/module.c

284

pr_err("%s: section %u reloc %u sym '%s': unsupported interworking call (Thumb -> ARM)\n",

arch/arm/kernel/module.c

328

pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",

arch/arm/kernel/module.c

390

pr_err("%s: unknown relocation: %u\n",

arch/arm/kernel/setup.c

1021

pr_err("crashkernel reservation failed - No suitable area found.\n");

arch/arm/kernel/setup.c

1031

pr_err("crashkernel reservation failed - memory is in use.\n");

arch/arm/kernel/setup.c

691

pr_err("CPU%u: configuration botched (ID %08x), CPU halted\n",

arch/arm/kernel/smp.c

175

pr_err("CPU%u: failed to boot: %d\n", cpu, ret);

arch/arm/kernel/smp.c

307

pr_err("CPU%u: unable to kill\n", cpu);

arch/arm/kernel/smp_twd.c

201

pr_err("smp_twd: clock not found %d\n", (int) PTR_ERR(twd_clk));

arch/arm/kernel/smp_twd.c

207

pr_err("smp_twd: clock failed to prepare+enable: %d\n", err);

arch/arm/kernel/smp_twd.c

283

pr_err("twd: can't register interrupt %d (%d)\n", twd_ppi, err);

arch/arm/kernel/tcm.c

139

pr_err("CPU: %sTCM%d of unknown size\n",

arch/arm/kernel/tcm.c

143

pr_err("CPU: %sTCM%d larger than 32k found\n",

arch/arm/kernel/tcm.c

405

pr_err("CPU DTCM: could not add DTCM " \

arch/arm/kernel/tcm.c

422

pr_err("CPU ITCM: could not add ITCM " \

arch/arm/kernel/topology.c

104

pr_err("missing device node for CPU %d\n", cpu);

arch/arm/kernel/topology.c

124

pr_err("%pOF missing clock-frequency property\n", cn);

arch/arm/kernel/traps.c

549

pr_err("[%d] %s: obsolete system call %08x.\n",

arch/arm/kernel/traps.c

672

pr_err("[%d] %s: arm syscall %d\n",

arch/arm/kernel/traps.c

737

pr_err("8<--- cut here ---\n");

arch/arm/kernel/traps.c

738

pr_err("[%d] %s: bad data abort: code %d instr 0x%08lx\n",

arch/arm/kernel/traps.c

751

pr_err("%s called, but not implemented\n", fn);

arch/arm/kernel/traps.c

759

pr_err("%s:%d: bad pte %08llx.\n", file, line, (long long)pte_val(pte));

arch/arm/kernel/traps.c

764

pr_err("%s:%d: bad pmd %08llx.\n", file, line, (long long)pmd_val(pmd));

arch/arm/kernel/traps.c

769

pr_err("%s:%d: bad pgd %08llx.\n", file, line, (long long)pgd_val(pgd));

arch/arm/kernel/traps.c

775

pr_err("Division by zero in kernel.\n");

arch/arm/kernel/traps.c

831

pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n",

arch/arm/kernel/traps.c

848

pr_err("CPU%u: unknown Spectre BHB state %d\n",

arch/arm/kernel/vdso.c

175

pr_err("VDSO is not a valid ELF object!\n");

arch/arm/lib/delay.c

75

pr_err("Ignoring delay timer %ps, which has insufficient resolution of %lluns\n",

arch/arm/mach-actions/platsmp.c

103

pr_err("%s: missing timer\n", __func__);

arch/arm/mach-actions/platsmp.c

109

pr_err("%s: could not map timer registers\n", __func__);

arch/arm/mach-actions/platsmp.c

115

pr_err("%s: missing sps\n", __func__);

arch/arm/mach-actions/platsmp.c

121

pr_err("%s: could not map sps registers\n", __func__);

arch/arm/mach-actions/platsmp.c

128

pr_err("%s: missing scu\n", __func__);

arch/arm/mach-actions/platsmp.c

134

pr_err("%s: could not map scu registers\n", __func__);

arch/arm/mach-alpine/platsmp.c

24

pr_err("FAIL: resume address over 32bit (%pa)", &addr);

arch/arm/mach-aspeed/platsmp.c

21

pr_err("could not map the secondary boot base!");

arch/arm/mach-aspeed/platsmp.c

42

pr_err("secboot device node found!!\n");

arch/arm/mach-aspeed/platsmp.c

48

pr_err("could not map the secondary boot base!");

arch/arm/mach-at91/pm.c

1458

pr_err("AT91: PM not supported, PMC not found\n");

arch/arm/mach-at91/pm.c

297

pr_err("AT91: PM: no ULP1 wakeup sources found!");

arch/arm/mach-at91/pm.c

406

pr_err("AT91: PM: Ethernet cannot resume from WoL!");

arch/arm/mach-at91/pm.c

448

pr_err("AT91: PM: failed to enable %s clocks\n",

arch/arm/mach-at91/pm.c

509

pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");

arch/arm/mach-at91/pm.c

521

pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);

arch/arm/mach-at91/pm.c

910

pr_err("unable to map ramc[%d] cpu registers\n", idx);

arch/arm/mach-at91/pm.c

927

pr_err("unable to find compatible ram controller node in dtb\n");

arch/arm/mach-at91/pm.c

936

pr_err("unable to map ramc phy cpu registers\n");

arch/arm/mach-at91/pm.c

944

pr_err("DDR PHY is mandatory!\n");

arch/arm/mach-bcm/bcm63xx_pmb.c

103

pr_err("CPU is missing a resets phandle\n");

arch/arm/mach-bcm/bcm63xx_pmb.c

108

pr_err("reset-controller does not conform to reset-cells\n");

arch/arm/mach-bcm/bcm63xx_pmb.c

114

pr_err("failed remapping PMB register\n");

arch/arm/mach-bcm/bcm63xx_pmb.c

96

pr_err("CPU is missing a reg node\n");

arch/arm/mach-bcm/bcm63xx_smp.c

116

pr_err("SMP: unable to find bcm63138 boot LUT node\n");

arch/arm/mach-bcm/bcm63xx_smp.c

124

pr_err("SMP: unable to remap boot LUT base register\n");

arch/arm/mach-bcm/bcm63xx_smp.c

131

pr_err("SMP: failed to locate secondary CPU%d node\n", cpu);

arch/arm/mach-bcm/bcm63xx_smp.c

42

pr_err("no configuration base address register!\n");

arch/arm/mach-bcm/bcm63xx_smp.c

49

pr_err("hardware reports only one core\n");

arch/arm/mach-bcm/bcm63xx_smp.c

55

pr_err("failed to remap config base (%lu/%u) for SCU\n",

arch/arm/mach-bcm/kona_l2_cache.c

26

pr_err("Secure Monitor call failed (%u)! Skipping L2 init.\n",

arch/arm/mach-bcm/kona_l2_cache.c

37

pr_err("Couldn't enable L2 cache: %d\n", ret);

arch/arm/mach-bcm/platsmp-brcmstb.c

249

pr_err("can't find phandle %s\n", name);

arch/arm/mach-bcm/platsmp-brcmstb.c

256

pr_err("iomap failed for cpubiuctrl_block\n");

arch/arm/mach-bcm/platsmp-brcmstb.c

264

pr_err("failed to read 1st entry from %s property (%d)\n", name,

arch/arm/mach-bcm/platsmp-brcmstb.c

273

pr_err("failed to read 2nd entry from %s property (%d)\n", name,

arch/arm/mach-bcm/platsmp-brcmstb.c

294

pr_err("can't find phandle %s\n", name);

arch/arm/mach-bcm/platsmp-brcmstb.c

301

pr_err("iomap failed for hif_cont_block\n");

arch/arm/mach-bcm/platsmp-brcmstb.c

323

pr_err("can't find compatible node %s\n", name);

arch/arm/mach-bcm/platsmp.c

170

pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);

arch/arm/mach-bcm/platsmp.c

180

pr_err("unable to map boot register for cpu %u\n", cpu_id);

arch/arm/mach-bcm/platsmp.c

208

pr_err("timeout waiting for cpu %u to start\n", cpu_id);

arch/arm/mach-bcm/platsmp.c

236

pr_err("unable to find cdc node\n");

arch/arm/mach-bcm/platsmp.c

244

pr_err("unable to remap cdc base register\n");

arch/arm/mach-bcm/platsmp.c

274

pr_err("unable to write startup addr to SKU ROM LUT\n");

arch/arm/mach-bcm/platsmp.c

294

pr_err("unable to find intc node\n");

arch/arm/mach-bcm/platsmp.c

302

pr_err("unable to remap intc base register\n");

arch/arm/mach-bcm/platsmp.c

53

pr_err("no configuration base address register!\n");

arch/arm/mach-bcm/platsmp.c

60

pr_err("hardware reports only one core\n");

arch/arm/mach-bcm/platsmp.c

66

pr_err("failed to remap config base (%lu/%u) for SCU\n",

arch/arm/mach-bcm/platsmp.c

84

pr_err("Failed to find device tree node for CPU%u\n", cpu);

arch/arm/mach-bcm/platsmp.c

91

pr_err("required secondary boot register not specified for CPU%u\n",

arch/arm/mach-davinci/common.c

35

pr_err("Unable to map JTAG ID register\n");

arch/arm/mach-davinci/common.c

55

pr_err("Unknown DaVinci JTAG ID 0x%x\n", soc_info->jtag_id);

arch/arm/mach-davinci/mux.c

50

pr_err("Invalid pin mux index: %lu (%lu)\n",

arch/arm/mach-davinci/mux.c

59

pr_err("No entry for the specified index\n");

arch/arm/mach-davinci/pm.c

151

pr_err("PM: cannot allocate SRAM memory\n");

arch/arm/mach-dove/mpp.c

129

pr_err("dove: invalid MPP GRP number (%u)\n", num);

arch/arm/mach-exynos/firmware.c

209

pr_err("%s: No address specified.\n", __func__);

arch/arm/mach-exynos/mcpm-exynos.c

261

pr_err("failed to map non-secure iRAM base address\n");

arch/arm/mach-exynos/mcpm-exynos.c

92

pr_err("cpu %u cluster %u powerup failed\n",

arch/arm/mach-exynos/platsmp.c

224

pr_err("cpu core %u restart failed\n", core_id);

arch/arm/mach-exynos/suspend.c

195

pr_err("%pOF: no parent, giving up\n", node);

arch/arm/mach-exynos/suspend.c

201

pr_err("%pOF: unable to obtain parent domain\n", node);

arch/arm/mach-exynos/suspend.c

208

pr_err("%pOF: failed to find exynos pmu register\n", node);

arch/arm/mach-exynos/suspend.c

536

pr_err("%s: No wake-up sources!\n", __func__);

arch/arm/mach-exynos/suspend.c

537

pr_err("%s: Aborting sleep\n", __func__);

arch/arm/mach-exynos/suspend.c

576

pr_err("Failed to prepare regulators for suspend (%d)\n", ret);

arch/arm/mach-exynos/suspend.c

680

pr_err("Failed to find PMU node\n");

arch/arm/mach-footbridge/dc21285-timer.c

116

pr_err("Failed to request irq %d (dc21285_timer1)", ce->irq);

arch/arm/mach-footbridge/dma-isa.c

219

pr_err("ISADMA%u: unable to register: %d\n",

arch/arm/mach-footbridge/isa-irq.c

161

pr_err("Failed to request irq %u (cascade)\n", irq);

arch/arm/mach-footbridge/isa-timer.c

34

pr_err("Failed to request irq %d(pit)\n", i8253_clockevent.irq);

arch/arm/mach-hisi/platmcpm.c

169

pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu);

arch/arm/mach-hisi/platmcpm.c

257

pr_err("%s: boot CPU is out of bound!\n", __func__);

arch/arm/mach-hisi/platmcpm.c

294

pr_err("failed to map relocation space\n");

arch/arm/mach-hisi/platmcpm.c

300

pr_err("failed to get sysctrl base\n");

arch/arm/mach-hisi/platmcpm.c

306

pr_err("failed to get fabric base phys\n");

arch/arm/mach-hisi/platmcpm.c

313

pr_err("failed to get fabric base\n");

arch/arm/mach-hisi/platsmp.c

48

pr_err("ioremap(scu_base) failed\n");

arch/arm/mach-hisi/platsmp.c

65

pr_err("failed to find hisilicon,sysctrl node\n");

arch/arm/mach-hisi/platsmp.c

71

pr_err("failed to map address\n");

arch/arm/mach-hisi/platsmp.c

76

pr_err("failed to find smp-offset property\n");

arch/arm/mach-imx/anatop.c

162

pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);

arch/arm/mach-imx/gpc.c

234

pr_err("%pOF: no parent, giving up\n", node);

arch/arm/mach-imx/gpc.c

240

pr_err("%pOF: unable to obtain parent domain\n", node);

arch/arm/mach-imx/mach-imx51.c

55

pr_err("Unable to map M4IF registers\n");

arch/arm/mach-imx/mach-imx6q.c

127

pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");

arch/arm/mach-imx/mach-imx6sl.c

30

pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n");

arch/arm/mach-imx/mach-imx7d.c

47

pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n");

arch/arm/mach-imx/mmdc.c

482

pr_err("failed to allocate PMU device!\n");

arch/arm/mach-imx/mmdc.c

492

pr_err("cpuhp_setup_state_multi failed\n");

arch/arm/mach-imx/src.c

114

pr_err("i.MX7D: CORE1_A7 power up timeout\n");

arch/arm/mach-imx/system.c

56

pr_err("%s: Watchdog reset failed to assert reset\n", __func__);

arch/arm/mach-mediatek/platsmp.c

107

pr_err("%s: Device is not supported\n", __func__);

arch/arm/mach-mediatek/platsmp.c

117

pr_err("%s: Can't remap %lx\n", __func__,

arch/arm/mach-meson/platsmp.c

141

pr_err("Timeout while waiting for CPU%d status\n",

arch/arm/mach-meson/platsmp.c

163

pr_err("Couldn't get the reset controller for CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

172

pr_err("Failed to assert CPU%d reset\n", cpu);

arch/arm/mach-meson/platsmp.c

180

pr_err("Couldn't wake up CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

190

pr_err("Error when disabling isolation of CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

197

pr_err("Failed to de-assert CPU%d reset\n", cpu);

arch/arm/mach-meson/platsmp.c

220

pr_err("Couldn't get the reset controller for CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

230

pr_err("Couldn't power up CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

239

pr_err("Failed to assert CPU%d reset\n", cpu);

arch/arm/mach-meson/platsmp.c

247

pr_err("Couldn't power up the memory for CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

255

pr_err("Couldn't wake up CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

265

pr_err("Timeout while polling PMU for CPU%d status\n", cpu);

arch/arm/mach-meson/platsmp.c

273

pr_err("Error when disabling isolation of CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

280

pr_err("Failed to de-assert CPU%d reset\n", cpu);

arch/arm/mach-meson/platsmp.c

326

pr_err("Error while waiting for SCU power-off on CPU%d\n",

arch/arm/mach-meson/platsmp.c

337

pr_err("Error when enabling isolation for CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

347

pr_err("Couldn't change sleep status of CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

368

pr_err("Error while waiting for SCU power-off on CPU%d\n",

arch/arm/mach-meson/platsmp.c

379

pr_err("Couldn't power down CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

387

pr_err("Error when enabling isolation for CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

397

pr_err("Couldn't change sleep status of CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

405

pr_err("Couldn't power down the memory of CPU%d\n", cpu);

arch/arm/mach-meson/platsmp.c

69

pr_err("Missing SRAM node\n");

arch/arm/mach-meson/platsmp.c

76

pr_err("Couldn't map SRAM registers\n");

arch/arm/mach-meson/platsmp.c

83

pr_err("Couldn't map PMU registers\n");

arch/arm/mach-meson/platsmp.c

90

pr_err("Missing SCU node\n");

arch/arm/mach-meson/platsmp.c

97

pr_err("Couldn't map SCU registers\n");

arch/arm/mach-mmp/time.c

185

pr_err("Failed to request irq %d (timer)\n", irq);

arch/arm/mach-mvebu/cpu-reset.c

46

pr_err("unable to get resource\n");

arch/arm/mach-mvebu/cpu-reset.c

52

pr_err("unable to request region\n");

arch/arm/mach-mvebu/cpu-reset.c

58

pr_err("unable to map registers\n");

arch/arm/mach-mvebu/mvebu-soc-id.c

73

pr_err("cannot get pci node\n");

arch/arm/mach-mvebu/mvebu-soc-id.c

80

pr_err("cannot get clock\n");

arch/arm/mach-mvebu/mvebu-soc-id.c

87

pr_err("cannot enable clock\n");

arch/arm/mach-mvebu/mvebu-soc-id.c

93

pr_err("cannot map registers\n");

arch/arm/mach-mvebu/platsmp-a9.c

52

pr_err("Could not start the secondary CPU: %d\n", ret);

arch/arm/mach-mvebu/pmsu.c

138

pr_err("Unable to map SRAM to setup the boot address WA\n");

arch/arm/mach-mvebu/pmsu.c

171

pr_err("unable to get resource\n");

arch/arm/mach-mvebu/pmsu.c

184

pr_err("unable to request region\n");

arch/arm/mach-mvebu/pmsu.c

193

pr_err("unable to map registers\n");

arch/arm/mach-mvebu/system-controller.c

94

pr_err("Cannot restart, system-controller not available: check the device tree\n");

arch/arm/mach-mxs/mach-mxs.c

148

pr_err("%s: timeout in reading OCOTP\n", __func__);

arch/arm/mach-mxs/mach-mxs.c

459

pr_err("Failed to assert the chip reset\n");

arch/arm/mach-npcm/platsmp.c

30

pr_err("no gcr device node\n");

arch/arm/mach-npcm/platsmp.c

36

pr_err("could not iomap gcr");

arch/arm/mach-npcm/platsmp.c

59

pr_err("no scu device node\n");

arch/arm/mach-npcm/platsmp.c

64

pr_err("could not iomap scu");

arch/arm/mach-omap1/ams-delta-fiq.c

106

pr_err("%s: failed to get GPIO pin %d (%ld)\n",

arch/arm/mach-omap1/ams-delta-fiq.c

142

pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",

arch/arm/mach-omap1/ams-delta-fiq.c

150

pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);

arch/arm/mach-omap1/ams-delta-fiq.c

97

pr_err("%s: GPIO chip %s is missing IRQ function\n", __func__,

arch/arm/mach-omap1/board-ams-delta.c

580

pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__,

arch/arm/mach-omap1/board-ams-delta.c

614

pr_err("%s: OMAP GPIO device not found\n", __func__);

arch/arm/mach-omap1/board-nokia770.c

259

pr_err("Unable to get CBUS Retu IRQ GPIO descriptor\n");

arch/arm/mach-omap1/board-nokia770.c

267

pr_err("Unable to get CBUS Tahvo IRQ GPIO descriptor\n");

arch/arm/mach-omap1/board-nokia770.c

327

pr_err("Unable to get ADS7846 IRQ GPIO descriptor\n");

arch/arm/mach-omap1/board-osk.c

407

pr_err("Unable to get SMC IRQ GPIO descriptor\n");

arch/arm/mach-omap1/board-osk.c

415

pr_err("Unable to get CF IRQ GPIO descriptor\n");

arch/arm/mach-omap1/board-osk.c

437

pr_err("Unable to get TPS65010 IRQ GPIO descriptor\n");

arch/arm/mach-omap1/board-palmte.c

243

pr_err("Unable to get TSC2102 IRQ GPIO descriptor\n");

arch/arm/mach-omap1/board-palmte.c

251

pr_err("Unable to get USB/DC IRQ GPIO descriptor\n");

arch/arm/mach-omap1/board-sx1.c

345

pr_err("Unable to get IRDA OFF GPIO descriptor\n");

arch/arm/mach-omap1/board-sx1.c

350

pr_err("Unable to get SWITCH GPIO descriptor\n");

arch/arm/mach-omap1/board-sx1.c

355

pr_err("Unable to get USB ON GPIO descriptor\n");

arch/arm/mach-omap1/clock_data.c

801

pr_err("failed to register clock \"%s\"! (%d)\n", name, err);

arch/arm/mach-omap1/clock_data.c

824

pr_err("System frequencies not set, using default. Check your config.\n");

arch/arm/mach-omap1/dma.c

303

pr_err("%s: Unable to device alloc for dma\n",

arch/arm/mach-omap1/dma.c

310

pr_err("%s: Unable to ioremap\n", __func__);

arch/arm/mach-omap1/omap-dma.c

421

pr_err("omap_dma: trying to free unallocated DMA channel %d\n",

arch/arm/mach-omap1/omap-dma.c

549

pr_err("DMA drain did not complete on lch %d\n", lch);

arch/arm/mach-omap1/pm.c

612

pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);

arch/arm/mach-omap1/pm.c

635

pr_err("sysfs_create_file failed: %d\n", error);

arch/arm/mach-omap1/pm.c

90

pr_err("idle_sleep_store: Invalid value\n");

arch/arm/mach-omap1/serial.c

208

pr_err("Unable to get UART wakeup GPIO descriptor\n");

arch/arm/mach-omap1/serial.c

215

pr_err("No interrupt for UART%d wake GPIO\n", idx + 1);

arch/arm/mach-omap1/sram-init.c

103

pr_err("Could not detect SRAM size\n");

arch/arm/mach-omap1/sram-init.c

110

pr_err("SRAM: Could not map\n");

arch/arm/mach-omap1/sram-init.c

48

pr_err("Not enough space in SRAM\n");

arch/arm/mach-omap1/time.c

164

pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);

arch/arm/mach-omap1/time.c

218

pr_err("Bogus timer, should not happen\n");

arch/arm/mach-omap1/timer.c

108

pr_err("%s: Failed to device alloc for dmtimer%d\n",

arch/arm/mach-omap1/timer32k.c

153

pr_err("Failed to request irq %d(32KHz timer)\n", INT_OS_TIMER);

arch/arm/mach-omap1/timer32k.c

241

pr_err("32k_counter: can't register clocksource\n");

arch/arm/mach-omap1/timer32k.c

267

pr_err("32k_counter: failed to map base addr\n");

arch/arm/mach-omap2/board-n8x0.c

455

pr_err("Could not set regulators to sleep on menelaus: %u\n",

arch/arm/mach-omap2/board-n8x0.c

468

pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);

arch/arm/mach-omap2/board-n8x0.c

60

pr_err("Unknown board\n");

arch/arm/mach-omap2/clockdomain.c

149

pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",

arch/arm/mach-omap2/clockdomain.c

82

pr_err("clockdomain: %s: powerdomain %s does not exist\n",

arch/arm/mach-omap2/display.c

169

pr_err("DSS not supported on this SoC\n");

arch/arm/mach-omap2/display.c

177

pr_err("Unable to register omapdss device\n");

arch/arm/mach-omap2/display.c

184

pr_err("Unable to register omapvrfb device\n");

arch/arm/mach-omap2/display.c

191

pr_err("Unable to register omapfb device\n");

arch/arm/mach-omap2/display.c

198

pr_err("Unable to register omap_vout device\n");

arch/arm/mach-omap2/display.c

254

pr_err("Unable to find DSS platform device\n");

arch/arm/mach-omap2/display.c

263

pr_err("Unable to populate DSS submodule devices\n");

arch/arm/mach-omap2/display.c

287

pr_err("display: could not disable outputs during reset due to missing dev_attr\n");

arch/arm/mach-omap2/display.c

364

pr_err("didn't get FRAMEDONE1/2/3 or TV interrupt\n");

arch/arm/mach-omap2/display.c

378

pr_err("dss_core: hwmod data doesn't contain reset data\n");

arch/arm/mach-omap2/id.c

189

pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n",

arch/arm/mach-omap2/id.c

73

pr_err("Cannot detect omap type!\n");

arch/arm/mach-omap2/io.c

395

pr_err("dpll3_m2_clk rate change failed: %d\n", v);

arch/arm/mach-omap2/omap-hotplug.c

37

pr_err("Secure clear status failed\n");

arch/arm/mach-omap2/omap-mpuss-lowpower.c

388

pr_err("Lookup failed for CPU0 pwrdm\n");

arch/arm/mach-omap2/omap-mpuss-lowpower.c

413

pr_err("Lookup failed for CPU1 pwrdm\n");

arch/arm/mach-omap2/omap-mpuss-lowpower.c

426

pr_err("Failed to lookup MPUSS power domain\n");

arch/arm/mach-omap2/omap-smp.c

367

pr_err("%s Unknown SMP SoC?\n", __func__);

arch/arm/mach-omap2/omap-wakeupgen.c

382

pr_err("GIC and Wakeupgen context save failed\n");

arch/arm/mach-omap2/omap-wakeupgen.c

555

pr_err("%pOF: no parent, giving up\n", node);

arch/arm/mach-omap2/omap-wakeupgen.c

561

pr_err("%pOF: unable to obtain parent domain\n", node);

arch/arm/mach-omap2/omap4-common.c

307

pr_err("No WUGEN found in DT, system will misbehave.\n");

arch/arm/mach-omap2/omap4-common.c

308

pr_err("UPDATE YOUR DEVICE TREE!\n");

arch/arm/mach-omap2/omap_hwmod.c

1944

pr_err("omap_hwmod: %s: _wait_target_ready failed: %d\n",

arch/arm/mach-omap2/omap_hwmod.c

2177

pr_err("%s: error mapping mpu_rt_idx: %i\n",

arch/arm/mach-omap2/omap_hwmod.c

2261

pr_err("omap_hwmod: %s: no dt node\n", oh->name);

arch/arm/mach-omap2/omap_hwmod.c

2274

pr_err("omap_hwmod: %s: Missing dt reg%i for %pOF\n",

arch/arm/mach-omap2/omap_hwmod.c

2812

pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",

arch/arm/mach-omap2/omap_hwmod.c

3036

pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",

arch/arm/mach-omap2/omap_phy_internal.c

42

pr_err("control module ioremap failed\n");

arch/arm/mach-omap2/omap_twl.c

116

pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",

arch/arm/mach-omap2/pdata-quirks.c

107

pr_err("Unable to get T3x USB reset GPIO descriptor\n");

arch/arm/mach-omap2/pdata-quirks.c

200

pr_err("Unable to get CM T3517 WLAN power GPIO descriptor\n");

arch/arm/mach-omap2/pdata-quirks.c

208

pr_err("Unable to get CM T3517 WLAN XCVR NOE GPIO descriptor\n");

arch/arm/mach-omap2/pm33xx-core.c

110

pr_err("PM: Cannot lookup gfx_l4ls_clkdm clockdomains\n");

arch/arm/mach-omap2/pm33xx-core.c

123

pr_err("PM: Could not ioremap SCU\n");

arch/arm/mach-omap2/pm33xx-core.c

152

pr_err("PM: GFX domain did not transition: %x\n", status);

arch/arm/mach-omap2/pm33xx-core.c

94

pr_err("PM: Failed to get cefuse_pwrdm\n");

arch/arm/mach-omap2/pm34xx.c

119

pr_err("save_secure_sram() returns %08x\n", ret);

arch/arm/mach-omap2/pm34xx.c

205

pr_err("Invalid mpu state in sram_idle\n");

arch/arm/mach-omap2/pm34xx.c

341

pr_err("Could not enter target state in pm_suspend\n");

arch/arm/mach-omap2/pm34xx.c

491

pr_err("pm: Failed to request pm_wkup irq\n");

arch/arm/mach-omap2/pm34xx.c

501

pr_err("pm: Failed to request pm_io irq\n");

arch/arm/mach-omap2/pm34xx.c

509

pr_err("Failed to setup powerdomains\n");

arch/arm/mach-omap2/pm34xx.c

517

pr_err("Failed to get mpu_pwrdm\n");

arch/arm/mach-omap2/pm34xx.c

570

pr_err("Memory allocation failed when allocating for secure sram context\n");

arch/arm/mach-omap2/pm44xx.c

202

pr_err("Failed lookup %s or %s for wakeup dependency\n",

arch/arm/mach-omap2/pm44xx.c

208

pr_err("Failed to add %s -> %s wakeup dependency(%d)\n",

arch/arm/mach-omap2/pm44xx.c

264

pr_err("Failed to setup powerdomains.\n");

arch/arm/mach-omap2/pm44xx.c

274

pr_err("Failed to initialise static dependencies.\n");

arch/arm/mach-omap2/pm44xx.c

280

pr_err("Failed to initialise OMAP4 MPUSS\n");

arch/arm/mach-omap2/powerdomain.c

113

pr_err("powerdomain: %s: voltagedomain %s does not exist\n",

arch/arm/mach-omap2/powerdomain.c

1140

pr_err("%s: unable to set power state of powerdomain: %s\n",

arch/arm/mach-omap2/powerdomain.c

99

pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n",

arch/arm/mach-omap2/powerdomains3xxx_data.c

556

pr_err("powerdomain: %s timeout waiting for transition\n",

arch/arm/mach-omap2/prm2xxx_3xxx.c

185

pr_err("powerdomain: %s: waited too long to complete transition\n",

arch/arm/mach-omap2/prm33xx.c

301

pr_err("powerdomain: %s: waited too long to complete transition\n",

arch/arm/mach-omap2/prm3xxx.c

706

pr_err("PRM: no device tree node for interrupt?\n");

arch/arm/mach-omap2/prm44xx.c

658

pr_err("powerdomain: %s: waited too long to complete transition\n",

arch/arm/mach-omap2/prm_common.c

202

pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n");

arch/arm/mach-omap2/prm_common.c

279

pr_err("PRCM: already initialized; won't reinitialize\n");

arch/arm/mach-omap2/prm_common.c

284

pr_err("PRCM: nr_regs too large\n");

arch/arm/mach-omap2/prm_common.c

317

pr_err("PRCM: failed to allocate irq descs: %d\n",

arch/arm/mach-omap2/prm_common.c

328

pr_err("PRCM: failed to allocate generic chip\n");

arch/arm/mach-omap2/sr_device.c

104

pr_err("%s: Unknown instance %s\n", __func__, name);

arch/arm/mach-omap2/sr_device.c

131

pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",

arch/arm/mach-omap2/sr_device.c

138

pr_err("%s: No Voltage table registered for VDD%d\n",

arch/arm/mach-omap2/sr_device.c

158

pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",

arch/arm/mach-omap2/sram.c

203

pr_err("SRAM: Could not map\n");

arch/arm/mach-omap2/sram.c

70

pr_err("Not enough space in SRAM\n");

arch/arm/mach-omap2/timer.c

68

pr_err("%s: ioremap failed\n", __func__);

arch/arm/mach-omap2/timer.c

73

pr_err("%s: failed to get system clock handle\n", __func__);

arch/arm/mach-omap2/vc.c

144

pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",

arch/arm/mach-omap2/vc.c

150

pr_err("%s: PMIC function to convert voltage in uV to vsel not registered. Hence unable to scale voltage for vdd_%s\n",

arch/arm/mach-omap2/vc.c

156

pr_err("%s: No read/write API for accessing vdd_%s regs\n",

arch/arm/mach-omap2/vc.c

812

pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);

arch/arm/mach-omap2/vc.c

817

pr_err("%s: No read/write API for accessing vdd_%s regs\n",

arch/arm/mach-omap2/voltage.c

134

pr_err("%s: unable to find current voltage for vdd_%s\n",

arch/arm/mach-omap2/voltage.c

241

pr_err("%s: Voltage driver support not added\n",

arch/arm/mach-omap2/voltage.c

82

pr_err("%s: No voltage scale API registered for vdd_%s\n",

arch/arm/mach-omap2/voltage.c

88

pr_err("%s: No voltage data defined for vdd_%s\n",

arch/arm/mach-omap2/vp.c

163

pr_err("%s: vdd_%s TRANXDONE timeout exceeded. TRANXDONE never got set after the voltage update\n",

arch/arm/mach-omap2/vp.c

209

pr_err("%s: No read/write API for accessing vdd_%s regs\n",

arch/arm/mach-omap2/vp.c

254

pr_err("%s: No read/write API for accessing vdd_%s regs\n",

arch/arm/mach-omap2/vp.c

46

pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);

arch/arm/mach-omap2/vp.c

51

pr_err("%s: No read/write API for accessing vdd_%s regs\n",

arch/arm/mach-omap2/wd_timer.c

36

pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);

arch/arm/mach-omap2/wd_timer.c

42

pr_err("%s: Could not get the base address for %s\n",

arch/arm/mach-orion5x/board-d2net.c

101

pr_err("d2net: failed to configure blue LED blink GPIO\n");

arch/arm/mach-orion5x/dns323-setup.c

702

pr_err("DNS-323: failed to setup power-off GPIO\n");

arch/arm/mach-orion5x/dns323-setup.c

719

pr_err("DNS-323: failed to setup power-off GPIO\n");

arch/arm/mach-orion5x/dns323-setup.c

729

pr_err("DNS-323: failed to setup power-off GPIO\n");

arch/arm/mach-orion5x/mv2120-setup.c

240

pr_err("mv2120: failed to setup power-off GPIO\n");

arch/arm/mach-orion5x/net2big-setup.c

133

pr_err("net2big: failed to setup SATA0 power GPIO\n");

arch/arm/mach-orion5x/net2big-setup.c

144

pr_err("net2big: failed to setup SATA1 power GPIO\n");

arch/arm/mach-orion5x/net2big-setup.c

155

pr_err("net2big: failed to setup SATA power request GPIO\n");

arch/arm/mach-orion5x/net2big-setup.c

271

pr_err("net2big: failed to setup power LED blink GPIO\n");

arch/arm/mach-orion5x/net2big-setup.c

285

pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");

arch/arm/mach-orion5x/net2big-setup.c

295

pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");

arch/arm/mach-orion5x/net2big-setup.c

428

pr_err("net2big: failed to configure power-off GPIO\n");

arch/arm/mach-orion5x/ts78xx-setup.c

441

pr_err("FPGA magic/rev mismatch\n"

arch/arm/mach-orion5x/ts78xx-setup.c

472

pr_err("FPGA borked, you must powercycle ASAP\n");

arch/arm/mach-orion5x/ts78xx-setup.c

561

pr_err("sysfs_create_file failed: %d\n", ret);

arch/arm/mach-pxa/devices.c

83

pr_err("Unable to create mci device: %d\n", err);

arch/arm/mach-pxa/gumstix.c

150

pr_err("Failed to start 32kHz clock\n");

arch/arm/mach-pxa/gumstix.c

161

pr_err("gumstix: failed request gpio for bluetooth reset\n");

arch/arm/mach-pxa/gumstix.c

167

pr_err("gumstix: can't reset bluetooth\n");

arch/arm/mach-pxa/irq.c

245

pr_err("Failed to find interrupt controller in arch-pxa\n");

arch/arm/mach-pxa/irq.c

252

pr_err("Not found marvell,intc-nr-irqs property\n");

arch/arm/mach-pxa/irq.c

258

pr_err("No registers defined for node\n");

arch/arm/mach-pxa/irq.c

267

pr_err("Failed to allocate IRQ numbers\n");

arch/arm/mach-pxa/spitz.c

430

pr_err("failed to create keypad device: %d\n", err);

arch/arm/mach-pxa/spitz.c

506

pr_err("failed to register gpio-keys software nodes: %d\n", err);

arch/arm/mach-pxa/spitz.c

515

pr_err("failed to create gpio-keys device: %d\n", err);

arch/arm/mach-pxa/spitz.c

573

pr_err("failed to register LED software nodes: %d\n", err);

arch/arm/mach-pxa/spitz.c

582

pr_err("failed to create LED device: %d\n", err);

arch/arm/mach-pxa/spitz.c

691

pr_err("pxa2xx-spi: failed to instantiate SPI controller: %d\n",

arch/arm/mach-qcom/platsmp.c

61

pr_err("%s: can't find node\n", __func__);

arch/arm/mach-realtek/rtd1195.c

17

pr_err("Failed to remove memblock %pa (%d)\n", &base, ret);

arch/arm/mach-rockchip/platsmp.c

121

pr_err("%s: sram or pmu missing for cpu boot\n", __func__);

arch/arm/mach-rockchip/platsmp.c

126

pr_err("%s: cpu %d outside maximum number of cpus %d\n",

arch/arm/mach-rockchip/platsmp.c

176

pr_err("%s: could not get address for node %pOF\n",

arch/arm/mach-rockchip/platsmp.c

183

pr_err("%s: reserved block with size 0x%x is too small for trampoline size 0x%x\n",

arch/arm/mach-rockchip/platsmp.c

234

pr_err("%s: could not find pmu dt node\n", __func__);

arch/arm/mach-rockchip/platsmp.c

241

pr_err("%s: could not map pmu registers\n", __func__);

arch/arm/mach-rockchip/platsmp.c

251

pr_err("%s: regmap init failed\n", __func__);

arch/arm/mach-rockchip/platsmp.c

265

pr_err("%s: could not find sram dt node\n", __func__);

arch/arm/mach-rockchip/platsmp.c

271

pr_err("%s: could not map sram registers\n", __func__);

arch/arm/mach-rockchip/platsmp.c

288

pr_err("%s: missing scu\n", __func__);

arch/arm/mach-rockchip/platsmp.c

294

pr_err("%s: could not map scu registers\n", __func__);

arch/arm/mach-rockchip/platsmp.c

305

pr_err("%s: ncores %d\n", __func__, ncores);

arch/arm/mach-rockchip/platsmp.c

71

pr_err("%s: could not get reset control for core %d\n",

arch/arm/mach-rockchip/platsmp.c

87

pr_err("%s: could not update power domain\n",

arch/arm/mach-rockchip/platsmp.c

96

pr_err("%s: could not read power domain state\n",

arch/arm/mach-rockchip/pm.c

193

pr_err("%s: Failed to suspend\n", __func__);

arch/arm/mach-rockchip/pm.c

221

pr_err("%s: Suspend finish failed\n", __func__);

arch/arm/mach-rockchip/pm.c

232

pr_err("%s: could not find pmu regmap\n", __func__);

arch/arm/mach-rockchip/pm.c

239

pr_err("%s: could not find sgrf regmap\n", __func__);

arch/arm/mach-rockchip/pm.c

246

pr_err("%s: could not find grf regmap\n", __func__);

arch/arm/mach-rockchip/pm.c

253

pr_err("%s: could not find bootram dt node\n", __func__);

arch/arm/mach-rockchip/pm.c

259

pr_err("%s: could not map bootram base\n", __func__);

arch/arm/mach-rockchip/pm.c

266

pr_err("%s: could not get bootram phy addr\n", __func__);

arch/arm/mach-rockchip/pm.c

313

pr_err("Failed to find PMU node\n");

arch/arm/mach-rockchip/pm.c

322

pr_err("%s: matches init error %d\n", __func__, ret);

arch/arm/mach-rockchip/rockchip.c

41

pr_err("rockchip: could not map timer7 registers\n");

arch/arm/mach-rpc/time.c

96

pr_err("Failed to request irq %d (timer)\n", IRQ_TIMER0);

arch/arm/mach-s3c/cpu.c

31

pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it. Without such feedback, the platform will be removed after 2022.\n");

arch/arm/mach-s3c/devs.c

389

pr_err("%s: Invalid SPI configuration\n", __func__);

arch/arm/mach-s3c/gpio-samsung.c

527

pr_err("gpio: %s has missing PM functions\n",

arch/arm/mach-s3c/gpio-samsung.c

530

pr_err("gpio: %s has no PM function\n", gc->label);

arch/arm/mach-s3c/init.c

63

pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it. Without such feedback, the platform will be removed after 2022.\n");

arch/arm/mach-s3c/pm-s3c64xx.c

76

pr_err("Failed to start domain %s\n", pd->name);

arch/arm/mach-s5pv210/pm.c

150

pr_err("%s: No wake-up sources!\n", __func__);

arch/arm/mach-s5pv210/pm.c

151

pr_err("%s: Aborting sleep\n", __func__);

arch/arm/mach-sa1100/h3600.c

68

pr_err("%s: can't request GPIOs\n", __func__);

arch/arm/mach-sa1100/h3xxx.c

54

pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__);

arch/arm/mach-sa1100/h3xxx.c

93

pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n",

arch/arm/mach-shmobile/pm-rcar-gen2.c

56

pr_err("Failed to request boot area\n");

arch/arm/mach-shmobile/pm-rcar-gen2.c

78

pr_err("Failed to get smp-sram address: %d\n", error);

arch/arm/mach-shmobile/pm-rcar-gen2.c

86

pr_err("Invalid smp-sram region\n");

arch/arm/mach-shmobile/smp-r8a7779.c

44

pr_err("Failed to request boot area\n");

arch/arm/mach-shmobile/smp-sh73a0.c

50

pr_err("Failed to request boot area\n");

arch/arm/mach-socfpga/l2_cache.c

30

pr_err("Unable to find socfpga-l2-ecc in dtb\n");

arch/arm/mach-socfpga/l2_cache.c

37

pr_err("Unable to find L2 ECC mapping in dtb\n");

arch/arm/mach-socfpga/l2_cache.c

54

pr_err("Unable to find socfpga-a10-l2-ecc in dtb\n");

arch/arm/mach-socfpga/l2_cache.c

61

pr_err("Unable to find L2 ECC mapping in dtb\n");

arch/arm/mach-socfpga/l2_cache.c

66

pr_err("System Manager not mapped for L2 ECC\n");

arch/arm/mach-socfpga/ocram.c

120

pr_err("SOCFPGA: sys-mgr is not initialized\n");

arch/arm/mach-socfpga/ocram.c

127

pr_err("Unable to find socfpga-a10-ocram-ecc\n");

arch/arm/mach-socfpga/ocram.c

135

pr_err("Unable to map OCRAM ECC block\n");

arch/arm/mach-socfpga/ocram.c

153

pr_err("ECC: cannot init OCRAM PORTA memory\n");

arch/arm/mach-socfpga/ocram.c

23

pr_err("Unable to find socfpga-ocram-ecc\n");

arch/arm/mach-socfpga/ocram.c

30

pr_err("Unable to map OCRAM ecc regs.\n");

arch/arm/mach-socfpga/platsmp.c

76

pr_err("%s: missing scu\n", __func__);

arch/arm/mach-socfpga/pm.c

39

pr_err("%s: Unable to find mmio-sram in dtb\n", __func__);

arch/arm/mach-socfpga/socfpga.c

30

pr_err("SMP: Need cpu1-start-addr in device tree.\n");

arch/arm/mach-spear/spear13xx.c

108

pr_err("%s:couldn't get clk for gpt\n", __func__);

arch/arm/mach-spear/spear13xx.c

115

pr_err("%s:couldn't get %s as parent for gpt\n", __func__,

arch/arm/mach-spear/spear13xx.c

95

pr_err("%s: Unknown machine\n", __func__);

arch/arm/mach-spear/spear3xx.c

81

pr_err("%s:couldn't get clk for gpt\n", __func__);

arch/arm/mach-spear/spear3xx.c

88

pr_err("%s:couldn't get %s as parent for gpt\n",

arch/arm/mach-spear/spear6xx.c

378

pr_err("%s:couldn't get clk for gpt\n", __func__);

arch/arm/mach-spear/spear6xx.c

385

pr_err("%s:couldn't get %s as parent for gpt\n",

arch/arm/mach-spear/time.c

196

pr_err("Failed to request irq %d (timer)\n", irq);

arch/arm/mach-spear/time.c

211

pr_err("%s: No timer passed via DT\n", __func__);

arch/arm/mach-spear/time.c

217

pr_err("%s: No irq passed for timer via DT\n", __func__);

arch/arm/mach-spear/time.c

223

pr_err("%s: of iomap failed\n", __func__);

arch/arm/mach-spear/time.c

229

pr_err("%s:couldn't get clk for gpt\n", __func__);

arch/arm/mach-spear/time.c

235

pr_err("%s:couldn't prepare-enable gpt clock\n", __func__);

arch/arm/mach-sti/platsmp.c

76

pr_err("CPU %d: missing or invalid cpu-release-addr "

arch/arm/mach-sunxi/mc_smp.c

104

pr_err("%s: Couldn't get CPU cluster %u core %u device node\n",

arch/arm/mach-sunxi/mc_smp.c

462

pr_err("Cluster %d CPU%d boots multiple times\n",

arch/arm/mach-sunxi/mc_smp.c

637

pr_err("%s: boot CPU is out of bounds!\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

720

pr_err("%s: PRCM not available\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

727

pr_err("%s: CPUCFG not available\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

734

pr_err("%s: Secure SRAM not available\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

746

pr_err("%s: PRCM not available\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

753

pr_err("%s: CPUCFG not available\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

760

pr_err("%s: RCPUCFG not available\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

820

pr_err("%s: CCI-400 not available\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

835

pr_err("%s: failed to map PRCM registers\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

844

pr_err("%s: failed to map CPUCFG registers: %d\n",

arch/arm/mach-sunxi/mc_smp.c

854

pr_err("%s: failed to map R-CPUCFG registers\n",

arch/arm/mach-sunxi/mc_smp.c

863

pr_err("%s: failed to map secure SRAM\n", __func__);

arch/arm/mach-sunxi/mc_smp.c

871

pr_err("%s: failed to configure boot cluster: %d\n",

arch/arm/mach-sunxi/platsmp.c

131

pr_err("Missing A23 PRCM node in the device tree\n");

arch/arm/mach-sunxi/platsmp.c

138

pr_err("Couldn't map A23 PRCM registers\n");

arch/arm/mach-sunxi/platsmp.c

145

pr_err("Missing A23 CPU config node in the device tree\n");

arch/arm/mach-sunxi/platsmp.c

152

pr_err("Couldn't map A23 CPU config registers\n");

arch/arm/mach-sunxi/platsmp.c

46

pr_err("Missing A31 PRCM node in the device tree\n");

arch/arm/mach-sunxi/platsmp.c

53

pr_err("Couldn't map A31 PRCM registers\n");

arch/arm/mach-sunxi/platsmp.c

60

pr_err("Missing A31 CPU config node in the device tree\n");

arch/arm/mach-sunxi/platsmp.c

67

pr_err("Couldn't map A31 CPU config registers\n");

arch/arm/mach-tegra/board-paz00.c

47

pr_err("failed to register %s node: %d\n",

arch/arm/mach-tegra/board-paz00.c

55

pr_err("failed to register WiFi rfkill device: %d\n", err);

arch/arm/mach-tegra/pm.c

417

pr_err("%s: unable to allocate memory for SDRAM"

arch/arm/mach-ux500/cpu-db8500.c

89

pr_err("could not find PRCMU base resource\n");

arch/arm/mach-ux500/platsmp.c

38

pr_err("No backupram base address\n");

arch/arm/mach-ux500/platsmp.c

44

pr_err("No backupram remap\n");

arch/arm/mach-ux500/platsmp.c

50

pr_err("No SCU base address\n");

arch/arm/mach-ux500/platsmp.c

56

pr_err("No SCU remap\n");

arch/arm/mach-ux500/pm.c

182

pr_err("could not remap PRCMU for PM functions\n");

arch/arm/mach-ux500/pm.c

189

pr_err("could not remap GIC dist base for PM functions\n");

arch/arm/mach-versatile/integrator_ap.c

140

pr_err("MODEM: unable to write PL010 UART CTRLS\n");

arch/arm/mach-versatile/integrator_ap.c

146

pr_err("MODEM: unable to write PL010 UART CRTLC\n");

arch/arm/mach-versatile/platsmp-realview.c

49

pr_err("PLATSMP: No SCU base address\n");

arch/arm/mach-versatile/platsmp-realview.c

55

pr_err("PLATSMP: No SCU remap\n");

arch/arm/mach-versatile/platsmp-realview.c

69

pr_err("PLATSMP: No syscon match\n");

arch/arm/mach-versatile/platsmp-realview.c

75

pr_err("PLATSMP: No syscon regmap\n");

arch/arm/mach-versatile/spc.c

453

pr_err(SPCLOG "Invalid IRQ %d\n", irq);

arch/arm/mach-versatile/spc.c

465

pr_err(SPCLOG "IRQ %d request failed\n", irq);

arch/arm/mach-versatile/spc.c

555

pr_err("failed to build OPP table\n");

arch/arm/mach-versatile/tc2_pm.c

247

pr_err("%s: boot CPU is out of bound!\n", __func__);

arch/arm/mach-vt8500/vt8500.c

109

pr_err("%s: of_iomap(gpio_mux) failed\n",

arch/arm/mach-vt8500/vt8500.c

116

pr_err("%s: ioremap(legacy_gpio_mux) failed\n",

arch/arm/mach-vt8500/vt8500.c

124

pr_err("%s: Could not remap GPIO mux\n", __func__);

arch/arm/mach-vt8500/vt8500.c

135

pr_err("%s:of_iomap(pmc) failed\n", __func__);

arch/arm/mach-vt8500/vt8500.c

141

pr_err("%s:ioremap(power_off) failed\n", __func__);

arch/arm/mach-vt8500/vt8500.c

146

pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);

arch/arm/mach-vt8500/vt8500.c

77

pr_err("%s: of_iomap(gpio_mux) failed\n",

arch/arm/mach-vt8500/vt8500.c

84

pr_err("%s: ioremap(legacy_gpio_mux) failed\n",

arch/arm/mach-vt8500/vt8500.c

92

pr_err("%s: Could not remap GPIO mux\n", __func__);

arch/arm/mach-zynq/common.c

75

pr_err("%s: no devcfg node found\n", __func__);

arch/arm/mach-zynq/common.c

82

pr_err("%s: Unable to map I/O memory\n", __func__);

arch/arm/mach-zynq/slcr.c

200

pr_err("%s: no slcr node found\n", __func__);

arch/arm/mach-zynq/slcr.c

206

pr_err("%s: Unable to map I/O memory\n", __func__);

arch/arm/mach-zynq/slcr.c

214

pr_err("%s: failed to find zynq-slcr\n", __func__);

arch/arm/mm/alignment.c

542

pr_err("LDMSTM: PC = %08lx, instr = %08x, "

arch/arm/mm/alignment.c

588

pr_err("Alignment trap: not handling ldm with s-bit set\n");

arch/arm/mm/alignment.c

957

pr_err("Alignment trap: not handling swp instruction\n");

arch/arm/mm/alignment.c

963

pr_err("Alignment trap: not handling instruction "

arch/arm/mm/cache-b15-rac.c

309

pr_err("failed to remap BIU control base\n");

arch/arm/mm/cache-b15-rac.c

325

pr_err("Unsupported CPU\n");

arch/arm/mm/cache-b15-rac.c

334

pr_err("failed to register reboot notifier\n");

arch/arm/mm/cache-feroceon-l2.c

337

pr_err(FW_BUG

arch/arm/mm/cache-l2x0.c

1012

pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n",

arch/arm/mm/cache-l2x0.c

1075

pr_err("l2x0 of: cache setting yield too high associativity\n");

arch/arm/mm/cache-l2x0.c

1076

pr_err("l2x0 of: %d calculated, max 8\n", assoc);

arch/arm/mm/cache-l2x0.c

1176

pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n",

arch/arm/mm/cache-l2x0.c

1210

pr_err("L2C-310 OF arm,double-linefill property value is missing\n");

arch/arm/mm/cache-l2x0.c

1220

pr_err("L2C-310 OF arm,double-linefill-incr property value is missing\n");

arch/arm/mm/cache-l2x0.c

1230

pr_err("L2C-310 OF arm,double-linefill-wrap property value is missing\n");

arch/arm/mm/cache-l2x0.c

1240

pr_err("L2C-310 OF arm,prefetch-drop property value is missing\n");

arch/arm/mm/cache-l2x0.c

1248

pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n");

arch/arm/mm/cache-l2x0.c

1262

pr_err("L2C-310 OF prefetch-data property value is missing\n");

arch/arm/mm/cache-l2x0.c

1276

pr_err("L2C-310 OF prefetch-instr property value is missing\n");

arch/arm/mm/cache-l2x0.c

1289

pr_err("L2C-310 OF dynamic-clock-gating property value is missing or invalid\n");

arch/arm/mm/cache-l2x0.c

1296

pr_err("L2C-310 OF standby-mode property value is missing or invalid\n");

arch/arm/mm/cache-l2x0.c

1800

pr_err("L2C: device tree omits to specify unified cache\n");

arch/arm/mm/cache-l2x0.c

1803

pr_err("L2C: device tree omits to specify cache-level\n");

arch/arm/mm/cache-l2x0.c

1806

pr_err("L2C: device tree specifies invalid cache level\n");

arch/arm/mm/cache-l2x0.c

631

pr_err("L2C-310: full line of zeros enabled in Cortex-A9 but not L2C-310 - invalid\n");

arch/arm/mm/cache-l2x0.c

634

pr_err("L2C-310: enabling full line of zeros but not enabled in Cortex-A9\n");

arch/arm/mm/cache-l2x0.c

641

pr_err("L2C-310: disabling Cortex-A9 specific feature bits\n");

arch/arm/mm/cache-l2x0.c

995

pr_err("L2C OF: set size %dKB is too large\n", way_size);

arch/arm/mm/cache-uniphier.c

324

pr_err("L%d: not compatible with uniphier cache\n",

arch/arm/mm/cache-uniphier.c

330

pr_err("L%d: cache-level is not specified\n", *cache_level);

arch/arm/mm/cache-uniphier.c

335

pr_err("L%d: cache-level is unexpected value %d\n",

arch/arm/mm/cache-uniphier.c

341

pr_err("L%d: cache-unified is not specified\n", *cache_level);

arch/arm/mm/cache-uniphier.c

351

pr_err("L%d: cache-line-size is unspecified or invalid\n",

arch/arm/mm/cache-uniphier.c

359

pr_err("L%d: cache-sets is unspecified or invalid\n",

arch/arm/mm/cache-uniphier.c

367

pr_err("L%d: cache-size is unspecified or invalid\n",

arch/arm/mm/cache-uniphier.c

378

pr_err("L%d: failed to map control register\n", *cache_level);

arch/arm/mm/cache-uniphier.c

385

pr_err("L%d: failed to map revision register\n", *cache_level);

arch/arm/mm/cache-uniphier.c

392

pr_err("L%d: failed to map operation register\n", *cache_level);

arch/arm/mm/cache-uniphier.c

477

pr_err("failed to initialize L2 cache\n");

arch/arm/mm/dma-mapping.c

1132

pr_err("Remapping memory failed: %d\n", err);

arch/arm/mm/dma-mapping.c

242

pr_err("DMA: failed to allocate %zu KiB pool for atomic coherent allocation\n",

arch/arm/mm/fault.c

204

pr_err("8<--- cut here ---\n");

arch/arm/mm/fault.c

205

pr_err("%s: unhandled page fault (%d) at 0x%08lx, code 0x%03x\n",

arch/arm/mm/init.c

351

pr_err("BUG: %s section %lx-%lx not aligned to %lx\n",

arch/arm/mm/mmu.c

133

pr_err("ERROR: could not find cache policy\n");

arch/arm/mm/mmu.c

155

pr_err("ERROR: unknown or unsupported cache policy\n");

arch/arm/mm/mmu.c

879

pr_err("MM: CPU does not support supersection mapping for 0x%08llx at 0x%08lx\n",

arch/arm/mm/mmu.c

891

pr_err("MM: invalid domain in supersection mapping for 0x%08llx at 0x%08lx\n",

arch/arm/mm/mmu.c

897

pr_err("MM: cannot create mapping for 0x%08llx at 0x%08lx invalid alignment\n",

arch/arm/mm/nommu.c

81

pr_err("Security extensions not enabled, vectors cannot be remapped to RAM, vectors base will be 0x00000000\n");

arch/arm/mm/proc-v7-bugs.c

201

pr_err("CPU%u: Spectre BHB: method disagreement, system vulnerable\n",

arch/arm/mm/proc-v7-bugs.c

264

pr_err("CPU%u: %s", smp_processor_id(), msg);

arch/arm/nwfpe/fpmodule.c

77

pr_err("nwfpe: bad structure size\n");

arch/arm/nwfpe/fpmodule.c

82

pr_err("nwfpe: bad register size\n");

arch/arm/plat-orion/time.c

235

pr_err("Failed to request irq %u (orion_tick)\n", irq);

arch/arm/probes/kprobes/test-core.c

1267

pr_err("r0 %08lx | r1 %08lx | r2 %08lx | r3 %08lx\n",

arch/arm/probes/kprobes/test-core.c

1269

pr_err("r4 %08lx | r5 %08lx | r6 %08lx | r7 %08lx\n",

arch/arm/probes/kprobes/test-core.c

1271

pr_err("r8 %08lx | r9 %08lx | r10 %08lx | r11 %08lx\n",

arch/arm/probes/kprobes/test-core.c

1273

pr_err("r12 %08lx | sp %08lx | lr %08lx | pc %08lx\n",

arch/arm/probes/kprobes/test-core.c

1275

pr_err("cpsr %08lx\n", regs->ARM_cpsr);

arch/arm/probes/kprobes/test-core.c

1282

pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1],

arch/arm/probes/kprobes/test-core.c

1299

pr_err("FAIL: %s\n", message);

arch/arm/probes/kprobes/test-core.c

1300

pr_err("FAIL: Test %s\n", current_title);

arch/arm/probes/kprobes/test-core.c

1301

pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1);

arch/arm/probes/kprobes/test-core.c

1452

pr_err("initial_regs:\n");

arch/arm/probes/kprobes/test-core.c

1454

pr_err("expected_regs:\n");

arch/arm/probes/kprobes/test-core.c

1456

pr_err("result_regs:\n");

arch/arm/probes/kprobes/test-core.c

1460

pr_err("expected_memory:\n");

arch/arm/probes/kprobes/test-core.c

1462

pr_err("result_memory:\n");

arch/arm/probes/kprobes/test-core.c

1636

pr_err("FAIL: Test coverage checks failed\n");

arch/arm/probes/kprobes/test-core.c

1648

pr_err("kprobe tests failed\n");

arch/arm/probes/kprobes/test-core.c

298

pr_err("FAIL: call_test_func: func returned %lx\n", ret);

arch/arm/probes/kprobes/test-core.c

303

pr_err("FAIL: test regs not OK\n");

arch/arm/probes/kprobes/test-core.c

339

pr_err("FAIL: register_kprobe failed with %d\n", ret);

arch/arm/probes/kprobes/test-core.c

351

pr_err("FAIL: kprobe pre_handler not called\n");

arch/arm/probes/kprobes/test-core.c

355

pr_err("FAIL: kprobe post_handler not called\n");

arch/arm/probes/kprobes/test-core.c

362

pr_err("FAIL: probe called after unregistering\n");

arch/arm/probes/kprobes/test-core.c

389

pr_err("FAIL: register_kretprobe failed with %d\n", ret);

arch/arm/probes/kprobes/test-core.c

401

pr_err("FAIL: kretprobe handler not called\n");

arch/arm/probes/kprobes/test-core.c

407

pr_err("FAIL: kretprobe called after unregistering\n");

arch/arm/probes/kprobes/test-core.c

527

pr_err("FAIL: register_kprobe failed with %d\n", ret);

arch/arm/probes/kprobes/test-core.c

622

pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n",

arch/arm/probes/kprobes/test-core.c

741

pr_err("FAIL: Out of space for test coverage data");

arch/arm/probes/kprobes/test-core.c

898

pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n",

arch/arm/probes/kprobes/test-core.c

903

pr_err("FAIL: Test coverage entry missing for %08x %08x\n",

arch/arm/vfp/vfpmodule.c

260

pr_err("VFP: Error: %s\n", reason);

arch/arm/vfp/vfpmodule.c

261

pr_err("VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",

arch/arm/vfp/vfpmodule.c

264

pr_err("VFP: s%2u: 0x%08x s%2u: 0x%08x\n",

arch/arm/xen/enlighten.c

337

pr_err("No extended regions are found\n");

arch/arm/xen/enlighten.c

398

pr_err("Cannot insert resource %pR (%d)\n", tmp_res, rc);

arch/arm/xen/enlighten.c

420

pr_err("Xen support was detected before, but it has disappeared\n");

arch/arm/xen/enlighten.c

427

pr_err("Xen grant table region is not found\n");

arch/arm/xen/enlighten.c

453

pr_err("Xen event channel interrupt not found\n");

arch/arm/xen/enlighten.c

467

pr_err("not enough memory\n");

arch/arm/xen/enlighten.c

520

pr_err("Error request IRQ %d\n", xen_events_irq);

arch/arm64/include/asm/pgtable.h

1087

pr_err("%s:%d: bad p4d %016llx.\n", __FILE__, __LINE__, p4d_val(e))

arch/arm64/include/asm/pgtable.h

117

pr_err("%s:%d: bad pte %016llx.\n", __FILE__, __LINE__, pte_val(e))

arch/arm64/include/asm/pgtable.h

1216

pr_err("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))

arch/arm64/include/asm/pgtable.h

869

pr_err("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))

arch/arm64/include/asm/pgtable.h

959

pr_err("%s:%d: bad pud %016llx.\n", __FILE__, __LINE__, pud_val(e))

arch/arm64/kernel/acpi.c

142

pr_err("Failed to get FADT table, %s\n", msg);

arch/arm64/kernel/acpi.c

156

pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n",

arch/arm64/kernel/acpi.c

163

pr_err("FADT has ARM boot flags set, assuming 5.1\n");

arch/arm64/kernel/acpi.c

167

pr_err("FADT not ACPI hardware reduced compliant\n");

arch/arm64/kernel/acpi.c

225

pr_err("Failed to init ACPI tables\n");

arch/arm64/kernel/acpi_numa.c

102

pr_err("SRAT: Too many proximity domains %d\n", pxm);

arch/arm64/kernel/acpi_numa.c

89

pr_err("SRAT: Invalid SRAT header length: %d\n",

arch/arm64/kernel/cpu_ops.c

64

pr_err("Failed to find device node for boot cpu\n");

arch/arm64/kernel/cpu_ops.c

76

pr_err("%pOF: missing enable-method property\n",

arch/arm64/kernel/cpu_ops.c

90

pr_err("Unsupported ACPI enable-method\n");

arch/arm64/kernel/cpuinfo.c

411

pr_err("cpuinfo: failed to register hotplug callbacks.\n");

arch/arm64/kernel/efi.c

228

pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg);

arch/arm64/kernel/ftrace.c

344

pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);

arch/arm64/kernel/hibernate.c

127

pr_err("Failing to hibernate on an unknown CPU.\n");

arch/arm64/kernel/hibernate.c

340

pr_err("Can't hibernate: no mechanism to offline secondary CPUs.\n");

arch/arm64/kernel/hibernate.c

435

pr_err("Failed to allocate zero page.\n");

arch/arm64/kernel/hibernate.c

442

pr_err("Failed to setup el2 vectors\n");

arch/arm64/kernel/hibernate.c

455

pr_err("Failed to create safe executable page for hibernate_exit code.\n");

arch/arm64/kernel/hibernate.c

478

pr_err("Failing to resume from hibernate on an unknown CPU.\n");

arch/arm64/kernel/hw_breakpoint.c

992

pr_err("failed to register CPU hotplug notifier: %d\n", ret);

arch/arm64/kernel/kexec_image.c

116

pr_err("Could not find any suitable kernel location!");

arch/arm64/kernel/machine_kexec.c

58

pr_err("Can't kexec: CPUs are stuck in the kernel.\n");

arch/arm64/kernel/machine_kexec_file.c

114

pr_err("Preparing elf core header failed\n");

arch/arm64/kernel/machine_kexec_file.c

165

pr_err("Preparing for new dtb failed\n");

arch/arm64/kernel/module-plts.c

309

pr_err("%s: module PLT section(s) missing\n", mod->name);

arch/arm64/kernel/module-plts.c

313

pr_err("%s: module symtab section missing\n", mod->name);

arch/arm64/kernel/module.c

107

pr_err("Invalid 32-bit data relocation (%d)\n", op);

arch/arm64/kernel/module.c

115

pr_err("Invalid length (%d) for data relocation\n", len);

arch/arm64/kernel/module.c

429

pr_err("module %s: unsupported RELA relocation: %llu\n",

arch/arm64/kernel/module.c

442

pr_err("module %s: overflow in relocation type %d val %Lx\n",

arch/arm64/kernel/module.c

48

pr_err("do_reloc: unknown relocation operation %d\n", reloc_op);

arch/arm64/kernel/module.c

495

pr_err("module %s: error occurred when applying alternatives\n", me->name);

arch/arm64/kernel/module.c

511

pr_err("module %s: error occurred during dynamic SCS patching (%d)\n",

arch/arm64/kernel/module.c

91

pr_err("Invalid 16-bit data relocation (%d)\n", op);

arch/arm64/kernel/proton-pack.c

1188

pr_err("WARNING: %s", EBPF_WARN);

arch/arm64/kernel/psci.c

32

pr_err("no cpu_on method, not booting CPU%d\n", cpu);

arch/arm64/kernel/psci.c

44

pr_err("failed to boot CPU%d (%d)\n", cpu, err);

arch/arm64/kernel/reloc_test_core.c

64

pr_err("Relocation failed, expected 0x%016llx, not 0x%016llx\n",

arch/arm64/kernel/rsi.c

172

pr_err("failed to register rsi platform device\n");

arch/arm64/kernel/rsi.c

48

pr_err("RME: RMM doesn't support RSI version %lu.%lu. Supported range: %lu.%lu-%lu.%lu\n",

arch/arm64/kernel/sdei.c

169

pr_err("Not supported on this hardware/boot configuration\n");

arch/arm64/kernel/setup.c

373

pr_err("WARNING: x1-x3 nonzero in violation of boot protocol:\n"

arch/arm64/kernel/smp.c

127

pr_err("CPU%u: failed to boot: %d\n", cpu, ret);

arch/arm64/kernel/smp.c

148

pr_err("CPU%u: failed in unknown state : 0x%lx\n",

arch/arm64/kernel/smp.c

587

pr_err("skipping CPU entry with invalid MPIDR 0x%llx\n", hwid);

arch/arm64/kernel/smp.c

592

pr_err("duplicate CPU MPIDR 0x%llx in MADT\n", hwid);

arch/arm64/kernel/smp.c

599

pr_err("duplicate boot CPU MPIDR: 0x%llx in MADT\n",

arch/arm64/kernel/smp.c

692

pr_err("%pOF: duplicate cpu reg properties in the DT\n",

arch/arm64/kernel/smp.c

705

pr_err("%pOF: duplicate boot cpu reg property in DT\n",

arch/arm64/kernel/smp.c

753

pr_err("missing boot CPU MPIDR, not enabling secondaries\n");

arch/arm64/kernel/smp_spin_table.c

58

pr_err("CPU %d: missing or invalid cpu-release-addr property\n",

arch/arm64/kernel/traps.c

1049

pr_err("%s generated an invalid instruction at %pS!\n",

arch/arm64/kernel/vdso.c

75

pr_err("vDSO is not a valid ELF object!\n");

arch/arm64/kvm/pkvm.c

282

pr_err("Failed to finalize Hyp protection: %d\n", ret);

arch/arm64/lib/insn.c

1003

pr_err("%s: invalid variant for reverse64 %d\n",

arch/arm64/lib/insn.c

1010

pr_err("%s: unknown data1 encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

1021

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

104

pr_err("%s: unknown immediate encoding %d\n", __func__,

arch/arm64/lib/insn.c

1058

pr_err("%s: unknown data2 encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

1069

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

1097

pr_err("%s: unknown data3 encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

1108

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

1158

pr_err("%s: unknown logical encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

1165

pr_err("%s: invalid shift encoding %d\n", __func__,

arch/arm64/lib/insn.c

1173

pr_err("%s: invalid shift encoding %d\n", __func__,

arch/arm64/lib/insn.c

1179

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

1223

pr_err("%s: unknown adr encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

134

pr_err("%s: unknown immediate encoding %d\n", __func__,

arch/arm64/lib/insn.c

1359

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

1461

pr_err("%s: unknown logical encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

1492

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

1524

pr_err("%s: unknown barrier type %d\n", __func__, type);

arch/arm64/lib/insn.c

168

pr_err("%s: unknown register type encoding %d\n", __func__,

arch/arm64/lib/insn.c

186

pr_err("%s: unknown register encoding %d\n", __func__, reg);

arch/arm64/lib/insn.c

207

pr_err("%s: unknown register type encoding %d\n", __func__,

arch/arm64/lib/insn.c

231

pr_err("%s: unknown size encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

248

pr_err("%s: A64 instructions must be word aligned\n", __func__);

arch/arm64/lib/insn.c

255

pr_err("%s: offset out of range\n", __func__);

arch/arm64/lib/insn.c

285

pr_err("%s: unknown branch encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

313

pr_err("%s: unknown branch encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

324

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

345

pr_err("%s: unknown condition encoding %d\n", __func__, cond);

arch/arm64/lib/insn.c

370

pr_err("%s: unknown branch encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

396

pr_err("%s: unknown load/store encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

421

pr_err("%s: unknown size encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

427

pr_err("%s: invalid imm: %d\n", __func__, imm);

arch/arm64/lib/insn.c

444

pr_err("%s: unknown load/store encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

504

pr_err("%s: unknown load/store encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

511

pr_err("%s: offset must be multiples of 4 in the range of [-256, 252] %d\n",

arch/arm64/lib/insn.c

519

pr_err("%s: offset must be multiples of 8 in the range of [-512, 504] %d\n",

arch/arm64/lib/insn.c

527

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

559

pr_err("%s: unknown load-acquire/store-release encoding %d\n",

arch/arm64/lib/insn.c

595

pr_err("%s: unknown load/store exclusive encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

633

pr_err("%s: unknown mem order %d\n", __func__, type);

arch/arm64/lib/insn.c

669

pr_err("%s: unimplemented mem atomic op %d\n", __func__, op);

arch/arm64/lib/insn.c

678

pr_err("%s: unimplemented size encoding %d\n", __func__, size);

arch/arm64/lib/insn.c

715

pr_err("%s: unknown mem order %d\n", __func__, type);

arch/arm64/lib/insn.c

738

pr_err("%s: unimplemented size encoding %d\n", __func__, size);

arch/arm64/lib/insn.c

779

pr_err("%s: unknown add/sub encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

790

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

815

pr_err("%s: invalid immediate encoding %d\n", __func__, imm);

arch/arm64/lib/insn.c

839

pr_err("%s: unknown bitfield encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

852

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

857

pr_err("%s: invalid immr encoding %d\n", __func__, immr);

arch/arm64/lib/insn.c

861

pr_err("%s: invalid imms encoding %d\n", __func__, imms);

arch/arm64/lib/insn.c

892

pr_err("%s: unknown movewide encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

897

pr_err("%s: invalid immediate encoding %d\n", __func__, imm);

arch/arm64/lib/insn.c

904

pr_err("%s: invalid shift encoding %d\n", __func__,

arch/arm64/lib/insn.c

912

pr_err("%s: invalid shift encoding %d\n", __func__,

arch/arm64/lib/insn.c

918

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/lib/insn.c

952

pr_err("%s: unknown add/sub encoding %d\n", __func__, type);

arch/arm64/lib/insn.c

959

pr_err("%s: invalid shift encoding %d\n", __func__,

arch/arm64/lib/insn.c

967

pr_err("%s: invalid shift encoding %d\n", __func__,

arch/arm64/lib/insn.c

973

pr_err("%s: unknown variant encoding %d\n", __func__, variant);

arch/arm64/mm/mmu.c

1060

pr_err("failed to allocate kfence pool\n");

arch/arm64/mm/mmu.c

2057

pr_err("Boot memory [%lx %lx] offlined\n", start, end);

arch/arm64/mm/mmu.c

2116

pr_err("Boot memory [%llx %llx] is offline, can be removed\n",

arch/arm64/mm/mmu.c

2132

pr_err("%s: Notifier registration failed %d\n", __func__, ret);

arch/arm64/mm/trans_pgd.c

220

pr_err("Failed to allocate memory for temporary page tables.\n");

arch/arm64/net/bpf_jit_comp.c

1995

pr_err("BPF private stack overflow/underflow detected for prog %sx\n",

arch/csky/abiv1/alignment.c

226

pr_err("%s user disabled.\n", __func__);

arch/csky/abiv1/alignment.c

234

pr_err("%s get_user failed.\n", __func__);

arch/csky/abiv1/alignment.c

242

pr_err("%s kernel disabled.\n", __func__);

arch/csky/include/asm/pgtable.h

27

pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)

arch/csky/include/asm/pgtable.h

29

pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))

arch/csky/kernel/ftrace.c

80

pr_err("%p: nop but get (%04x %04x %04x %04x %04x %04x %04x)\n",

arch/csky/kernel/module.c

91

pr_err("module %s: Unknown relocation: %u\n",

arch/csky/kernel/perf_event.c

1169

pr_err("no irqs for PMUs defined\n");

arch/csky/kernel/perf_event.c

1179

pr_err("unable to request IRQ%d for CSKY PMU counters\n",

arch/csky/kernel/setup.c

21

pr_err("initrd not found or empty");

arch/csky/kernel/setup.c

26

pr_err("initrd extends beyond end of memory");

arch/csky/kernel/setup.c

33

pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region",

arch/csky/kernel/setup.c

50

pr_err(" - disabling initrd\n");

arch/csky/kernel/vdso.c

25

pr_err("vdso: pagelist allocation failed\n");

arch/csky/mm/tcm.c

151

pr_err("%s: gen_pool add failed!\n", __func__);

arch/hexagon/kernel/smp.c

151

pr_err("Failed to request irq %u (ipi_handler)\n", irq);

arch/hexagon/kernel/smp.c

212

pr_err("Failed to request irq %d (ipi_handler)\n", irq);

arch/hexagon/kernel/time.c

202

pr_err("Failed to register rtos_timer interrupt\n");

arch/loongarch/include/asm/pgtable.h

128

pr_err("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))

arch/loongarch/include/asm/pgtable.h

131

pr_err("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))

arch/loongarch/include/asm/pgtable.h

135

pr_err("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e))

arch/loongarch/include/asm/pgtable.h

138

pr_err("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))

arch/loongarch/kernel/acpi.c

270

pr_err("SRAT: Too many proximity domains %x\n", pxm);

arch/loongarch/kernel/acpi.c

304

pr_err("SRAT: Too many proximity domains %x\n", pxm);

arch/loongarch/kernel/alternative.c

136

pr_err("Not support pcrel instruction at present!");

arch/loongarch/kernel/efi.c

113

pr_err("Can't find EFI system table.\n");

arch/loongarch/kernel/efi.c

91

pr_err("Could not map primary_display config table\n");

arch/loongarch/kernel/ftrace_dyn.c

102

pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);

arch/loongarch/kernel/inst.c

250

pr_err("%s: operation failed\n", __func__);

arch/loongarch/kernel/kexec_efi.c

95

pr_err("Could not find any suitable kernel location!");

arch/loongarch/kernel/kgdb.c

577

pr_err("Cannot remove hw breakpoint at %lx\n", addr);

arch/loongarch/kernel/kgdb.c

625

pr_err("KGDB: hw bpt remove failed %lx\n", breakinfo[i].addr);

arch/loongarch/kernel/kgdb.c

701

pr_err("kgdb: Could not allocate hw breakpoints.\n");

arch/loongarch/kernel/machine_kexec.c

70

pr_err("Command line not included in the provided image\n");

arch/loongarch/kernel/machine_kexec_file.c

168

pr_err("Preparing elf core header failed\n");

arch/loongarch/kernel/machine_kexec_file.c

224

pr_err("Appending command line exceeds COMMAND_LINE_SIZE\n");

arch/loongarch/kernel/module-sections.c

126

pr_err("%s: module GOT section(s) missing\n", mod->name);

arch/loongarch/kernel/module-sections.c

130

pr_err("%s: module PLT section(s) missing\n", mod->name);

arch/loongarch/kernel/module-sections.c

134

pr_err("%s: module PLT.IDX section(s) missing\n", mod->name);

arch/loongarch/kernel/module-sections.c

32

pr_err("%s: module contains bad GOT relocation\n", mod->name);

arch/loongarch/kernel/module.c

176

pr_err("%s: Unsupport relocation type %u\n", mod->name, type);

arch/loongarch/kernel/module.c

259

pr_err("%s: Unsupport relocation type %u\n", mod->name, type);

arch/loongarch/kernel/module.c

264

pr_err("module %s: opr1 = 0x%lx overflow! dangerous %s (%u) relocation\n",

arch/loongarch/kernel/module.c

269

pr_err("module %s: opr1 = 0x%lx unaligned! dangerous %s (%u) relocation\n",

arch/loongarch/kernel/module.c

293

pr_err("%s: Unsupport relocation type %u\n", mod->name, type);

arch/loongarch/kernel/module.c

314

pr_err("module %s: jump offset = 0x%llx unaligned! dangerous R_LARCH_B26 (%u) relocation\n",

arch/loongarch/kernel/module.c

320

pr_err("module %s: jump offset = 0x%llx overflow! dangerous R_LARCH_B26 (%u) relocation\n",

arch/loongarch/kernel/module.c

348

pr_err("%s: Unsupport relocation type %u\n", mod->name, type);

arch/loongarch/kernel/module.c

386

pr_err("%s: Unsupport relocation type %u\n", mod->name, type);

arch/loongarch/kernel/module.c

423

pr_err("%s: Unsupport relocation type %u\n", mod->name, type);

arch/loongarch/kernel/module.c

515

pr_err("%s: Unknown relocation type %u\n", mod->name, type);

arch/loongarch/kernel/module.c

558

pr_err("%s: Can not find HI20 relocation information\n", mod->name);

arch/loongarch/kernel/module.c

69

pr_err("%s: Unsupport relocation type %u, please add its support.\n", me->name, type);

arch/loongarch/kernel/paravirt.c

313

pr_err("Failed to install cpu hotplug callbacks\n");

arch/loongarch/kernel/setup.c

196

pr_err("mem parameter is empty, do nothing\n");

arch/loongarch/kernel/time.c

159

pr_err("Failed to map irq %d (timer)\n", irq);

arch/loongarch/kernel/time.c

187

pr_err("Failed to request irq %d (timer)\n", irq);

arch/loongarch/kernel/traps.c

1066

pr_err("Caught reserved exception %u on pid:%d [%s] - should not happen\n",

arch/loongarch/kernel/traps.c

1082

pr_err("Cache error exception:\n");

arch/loongarch/kernel/traps.c

1083

pr_err("csr_merrctl == %08x\n", merrctl);

arch/loongarch/kernel/traps.c

1084

pr_err("csr_merrera == %016lx\n", merrera);

arch/loongarch/kernel/unwind_orc.c

511

pr_err("cannot find unwind pc at %px\n", (void *)pc);

arch/loongarch/kvm/main.c

357

pr_err("kvm: failed to allocate percpu kvm_context\n");

arch/loongarch/net/bpf_jit.c

1267

pr_err("bpf_jit: unknown opcode %02x\n", code);

arch/loongarch/net/bpf_jit.c

1346

pr_err("bpf_jit: jump target address is error\n");

arch/m68k/68000/timers.c

106

pr_err("Failed to request irq %d (timer): %pe\n", TMR_IRQ_NUM,

arch/m68k/amiga/chipram.c

102

pr_err("amiga_chip_free: trying to free nonexistent region at "

arch/m68k/amiga/chipram.c

84

pr_err("amiga_chip_alloc_res: allocate_resource() failed %d!\n",

arch/m68k/amiga/cia.c

194

pr_err("Couldn't register %s interrupt\n", base->name);

arch/m68k/amiga/config.c

506

pr_err("Couldn't register timer interrupt\n");

arch/m68k/amiga/config.c

650

pr_err("Not enough chipram for debugging\n");

arch/m68k/apollo/config.c

178

pr_err("Couldn't register timer interrupt\n");

arch/m68k/atari/ataints.c

344

pr_err("Couldn't register %s interrupt\n", stmfp_base.name);

arch/m68k/atari/atakeyb.c

302

pr_err("Error in keyboard communication\n");

arch/m68k/atari/atakeyb.c

556

pr_err("Keyboard self test failed!\n");

arch/m68k/atari/nvram.c

267

pr_err("nvram: can't create /proc/driver/nvram\n");

arch/m68k/atari/stdma.c

203

pr_err("Couldn't register ST-DMA interrupt\n");

arch/m68k/atari/stram.c

172

pr_err("atari_stram_alloc: allocate_resource() failed %d!\n",

arch/m68k/atari/stram.c

192

pr_err("atari_stram_free: trying to free nonexistent region "

arch/m68k/atari/time.c

70

pr_err("Couldn't register timer interrupt\n");

arch/m68k/coldfire/pit.c

155

pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_PIT1,

arch/m68k/coldfire/sltimers.c

140

pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,

arch/m68k/coldfire/sltimers.c

63

pr_err("Failed to request irq %d (profile timer): %pe\n",

arch/m68k/coldfire/timers.c

131

pr_err("Failed to request irq %d (timer): %pe\n", MCF_IRQ_TIMER,

arch/m68k/coldfire/timers.c

186

pr_err("Failed to request irq %d (profile timer): %pe\n",

arch/m68k/emu/nfcon.c

151

pr_err("failed to register nfcon tty driver\n");

arch/m68k/emu/nfeth.c

241

pr_err("request for irq %d failed %d", nfEtherIRQ, error);

arch/m68k/hp300/time.c

111

pr_err("Couldn't register timer interrupt\n");

arch/m68k/include/asm/math-emu.h

121

pr_err("You just hit an unimplemented " \

arch/m68k/include/asm/math-emu.h

123

pr_err("Please report this to ....\n"); \

arch/m68k/include/asm/sun3_pgtable.h

124

pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))

arch/m68k/include/asm/sun3_pgtable.h

126

pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))

arch/m68k/kernel/bootinfo_proc.c

46

pr_err("Cannot save %zu bytes of bootinfo\n", size);

arch/m68k/kernel/module.c

54

pr_err("module %s: Unknown relocation: %u\n", me->name,

arch/m68k/kernel/module.c

94

pr_err("module %s: Unknown relocation: %u\n", me->name,

arch/m68k/kernel/traps.c

173

pr_err("pc=%#lx, fa=%#lx\n", fp->ptregs.pc,

arch/m68k/kernel/traps.c

175

pr_err("68060 access error, fslw=%lx\n", fslw);

arch/m68k/kernel/traps.c

243

pr_err("access_error040: cannot handle 1st writeback. oops.\n");

arch/m68k/kernel/traps.c

355

pr_err("68040 bus error (ssw=%x, faddr=%lx)\n", ssw,

arch/m68k/kernel/traps.c

411

pr_err("Instruction fault at %#010lx\n",

arch/m68k/kernel/traps.c

421

pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n",

arch/m68k/kernel/traps.c

426

pr_err("BAD KERNEL BUSERR\n");

arch/m68k/kernel/traps.c

550

pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n",

arch/m68k/kernel/traps.c

563

pr_err("unexpected bus error (%#x,%#x)\n", ssw,

arch/m68k/kernel/traps.c

566

pr_err("invalid %s access at %#lx from pc %#lx\n",

arch/m68k/kernel/traps.c

577

pr_err("weird %s access at %#lx from pc %#lx (ssw is %#x)\n",

arch/m68k/kernel/traps.c

586

pr_err("level 0 mmusr is %#x\n", mmusr);

arch/m68k/kernel/traps.c

616

pr_err("Instruction fault at %#010lx\n", fp->ptregs.pc);

arch/m68k/kernel/traps.c

618

pr_err("BAD KERNEL BUSERR\n");

arch/m68k/kernel/traps.c

655

pr_err("invalid insn access at %#lx from pc %#lx\n",

arch/m68k/kernel/traps.c

973

pr_err("*** %s *** FORMAT=%X\n",

arch/m68k/kernel/traps.c

977

pr_err("*** Exception %d *** FORMAT=%X\n",

arch/m68k/kernel/traps.c

982

pr_err("SSW=%#06x ", ssw);

arch/m68k/kernel/traps.c

985

pr_err("Pipe stage C instruction fault at %#010lx\n",

arch/m68k/kernel/traps.c

989

pr_err("Pipe stage B instruction fault at %#010lx\n",

arch/m68k/kernel/traps.c

993

pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n",

arch/m68k/kernel/traps.c

998

pr_err("Current process id is %d\n", task_pid_nr(current));

arch/m68k/mac/config.c

126

pr_err("ERROR: no Mac, but config_mac() called!!\n");

arch/m68k/mac/iop.c

288

pr_err("Couldn't register ISM IOP interrupt\n");

arch/m68k/mac/iop.c

292

pr_err("Couldn't register ISM IOP interrupt\n");

arch/m68k/mac/macints.c

178

pr_err("Couldn't register NMI\n");

arch/m68k/mac/misc.c

280

pr_err("%s: failed to read a stable value; got 0x%08x then 0x%08x\n",

arch/m68k/mac/via.c

599

pr_err("Couldn't register %s interrupt\n", "timer");

arch/m68k/mvme147/config.c

149

pr_err("Couldn't register timer interrupt\n");

arch/m68k/sun3/sun3ints.c

95

pr_err("Couldn't register %s interrupt\n", "int5");

arch/m68k/sun3/sun3ints.c

97

pr_err("Couldn't register %s interrupt\n", "int7");

arch/m68k/sun3/sun3ints.c

99

pr_err("Couldn't register %s interrupt\n", "vec255");

arch/m68k/virt/config.c

121

pr_err("Cannot allocate virt controller resource\n");

arch/m68k/virt/ints.c

143

pr_err("Cannot allocate %s resource\n", picname[i]);

arch/m68k/virt/ints.c

153

pr_err("Couldn't register NMI\n");

arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c

26

pr_err("ERROR: Microblaze " x "-different for PVR and DTS\n");

arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c

36

pr_err("ERROR: MB has broken PVR regs -> use DTS setting\n");

arch/microblaze/kernel/cpu/cpuinfo-static.c

21

pr_err("ERROR: Microblaze " x "-different for kernel and DTS\n");

arch/microblaze/kernel/cpu/cpuinfo.c

131

pr_err("ERROR: CPU CCF input clock not found\n");

arch/microblaze/kernel/cpu/cpuinfo.c

139

pr_err("ERROR: CPU clock frequency not setup\n");

arch/microblaze/kernel/cpu/cpuinfo.c

95

pr_err("You don't have cpu or are missing cpu reg property!!!\n");

arch/microblaze/kernel/module.c

82

pr_err("module %s: Unknown relocation: %u\n",

arch/microblaze/kernel/timer.c

232

pr_err("failed to register clocksource");

arch/microblaze/kernel/timer.c

265

pr_err("ERROR: invalid timer base address\n");

arch/microblaze/kernel/timer.c

280

pr_err("Failed to parse and map irq");

arch/microblaze/kernel/timer.c

286

pr_err("Please enable two timers in HW\n");

arch/microblaze/kernel/timer.c

294

pr_err("ERROR: timer CCF input clock not found\n");

arch/microblaze/kernel/timer.c

303

pr_err("ERROR: Using CPU clock frequency\n");

arch/microblaze/kernel/timer.c

312

pr_err("Failed to setup IRQ");

arch/mips/alchemy/board-mtx1.c

118

pr_err("failed to register gpio-keys software nodes: %d\n", err);

arch/mips/alchemy/board-mtx1.c

127

pr_err("failed to create gpio-keys device: %d\n", err);

arch/mips/alchemy/board-mtx1.c

150

pr_err("failed to create gpio-keys device: %d\n", err);

arch/mips/alchemy/board-mtx1.c

197

pr_err("failed to register LED software nodes: %d\n", err);

arch/mips/alchemy/board-mtx1.c

206

pr_err("failed to create LED device: %d\n", err);

arch/mips/alchemy/common/clock.c

170

pr_err("failed to register clock\n");

arch/mips/alchemy/common/irq.c

995

pr_err("unknown Alchemy IRQ core\n");

arch/mips/alchemy/common/time.c

128

pr_err("Failed to register timer interrupt\n");

arch/mips/alchemy/devboards/db1000.c

505

pr_err("failed to register SPI controller: %d\n", err);

arch/mips/alchemy/devboards/db1xxx.c

77

pr_err("unsupported CPU on board\n");

arch/mips/ath25/ar2315.c

160

pr_err("Failed to register ar2315-ahb-error interrupt\n");

arch/mips/ath25/ar5312.c

154

pr_err("Failed to register ar5312-ahb-error interrupt\n");

arch/mips/ath79/clock.c

629

pr_err("%pOF: can't map pll registers\n", np);

arch/mips/ath79/clock.c

653

pr_err("%pOF: could not register clk provider\n", np);

arch/mips/ath79/setup.c

248

pr_err("Failed to get CPU node\n");

arch/mips/ath79/setup.c

254

pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));

arch/mips/bcm47xx/buttons.c

776

pr_err("Failed to register platform device: %d\n", err);

arch/mips/bcm47xx/setup.c

196

pr_err("Failed to set SoC device name: %d\n", err);

arch/mips/bcm47xx/setup.c

203

pr_err("Failed to set SoC DMA mask: %d\n", err);

arch/mips/bcm47xx/setup.c

270

pr_err("Failed to register SoC device\n");

arch/mips/bcm47xx/workarounds.c

14

pr_err("Failed to request USB power gpio: %d\n", err);

arch/mips/bcm63xx/boards/board_bcm963xx.c

711

pr_err("unable to fill SPROM for given bustype\n");

arch/mips/bcm63xx/boards/board_bcm963xx.c

793

pr_err("unknown bcm963xx board: %s\n", name);

arch/mips/bcm63xx/boards/board_bcm963xx.c

891

pr_err("failed to register fallback SPROM\n");

arch/mips/bcm63xx/dev-flash.c

127

pr_err("flash detection failed for BCM%x: %d\n",

arch/mips/bcm63xx/dev-pcmcia.c

142

pr_err("unable to set pcmcia chip select\n");

arch/mips/bcm63xx/irq.c

313

pr_err("bogus flow type combination given !\n");

arch/mips/bcm63xx/irq.c

531

pr_err("Failed to request irq %d (cascade_extirq)\n",

arch/mips/bcm63xx/irq.c

539

pr_err("Failed to request irq %d (cascade_ip2)\n", irq);

arch/mips/bcm63xx/irq.c

545

pr_err("Failed to request irq %d (cascade_ip3)\n", irq);

arch/mips/bcm63xx/nvram.c

62

pr_err("not enough mac addresses\n");

arch/mips/bcm63xx/nvram.c

81

pr_err("unable to fetch mac address\n");

arch/mips/bcm63xx/timer.c

199

pr_err("%s: failed to register irq\n", __func__);

arch/mips/cavium-octeon/flash_setup.c

116

pr_err("Failed to register MTD device for flash\n");

arch/mips/cavium-octeon/octeon-irq.c

1193

pr_err("Error: (%pOFn) Invalid irq trigger specification: %x\n",

arch/mips/cavium-octeon/octeon-irq.c

1520

pr_err("Failed to allocate desc for %s\n", "OCTEON_IRQ_MBOX0");

arch/mips/cavium-octeon/octeon-irq.c

1529

pr_err("Failed to allocate desc for %s\n", "OCTEON_IRQ_MBOX1");

arch/mips/cavium-octeon/octeon-irq.c

1571

pr_err("Failed to allocate desc for %s\n", "OCTEON_IRQ_WDOGx");

arch/mips/cavium-octeon/octeon-irq.c

2221

pr_err("ERROR: %s mapping %u is too big!\n",

arch/mips/cavium-octeon/octeon-irq.c

2268

pr_err("ERROR: CIB bit %d@%llx IRQ unhandled, disabling\n",

arch/mips/cavium-octeon/octeon-irq.c

2302

pr_err("ERROR: Couldn't acquire parent_irq for %pOFn\n",

arch/mips/cavium-octeon/octeon-irq.c

2314

pr_err("ERROR: Couldn't acquire reg(0) %pOFn\n", ciu_node);

arch/mips/cavium-octeon/octeon-irq.c

2321

pr_err("ERROR: Couldn't acquire reg(1) %pOFn\n", ciu_node);

arch/mips/cavium-octeon/octeon-irq.c

2328

pr_err("ERROR: Couldn't read cavium,max-bits from %pOFn\n",

arch/mips/cavium-octeon/octeon-irq.c

2339

pr_err("ERROR: Couldn't irq_domain_create_linear()\n");

arch/mips/cavium-octeon/octeon-irq.c

2349

pr_err("request_irq cib failed %d\n", r);

arch/mips/cavium-octeon/octeon-platform.c

146

pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n",

arch/mips/cavium-octeon/octeon-platform.c

562

pr_err("Error: could not rename ethernet phy: <%s>", p);

arch/mips/cavium-octeon/octeon-platform.c

589

pr_err("Setting \"local-mac-address\" failed %d", r);

arch/mips/cavium-octeon/octeon-platform.c

784

pr_err("Error: No /aliases node in device tree.");

arch/mips/cavium-octeon/setup.c

1213

pr_err("Registration of %s failed!\n", name);

arch/mips/cavium-octeon/setup.c

1224

pr_err("Registration of octeon_lmc_edac %d failed!\n", i);

arch/mips/cavium-octeon/setup.c

125

pr_err("Error: requested memory too large,"

arch/mips/cavium-octeon/setup.c

407

pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n",

arch/mips/cavium-octeon/setup.c

412

pr_err("Core%d L1 Dcache parity error: "

arch/mips/cavium-octeon/setup.c

419

pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n",

arch/mips/cavium-octeon/setup.c

798

pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");

arch/mips/cavium-octeon/smp.c

228

pr_err("Secondary boot timeout\n");

arch/mips/cobalt/irq.c

56

pr_err("Failed to request irq %d (cascade)\n",

arch/mips/cobalt/irq.c

61

pr_err("Failed to request irq %d (cascade)\n",

arch/mips/dec/setup.c

757

pr_err("Failed to register fpu interrupt\n");

arch/mips/dec/setup.c

764

pr_err("Failed to register cascade interrupt\n");

arch/mips/dec/setup.c

770

pr_err("Failed to register bus error interrupt\n");

arch/mips/dec/setup.c

776

pr_err("Failed to register halt interrupt\n");

arch/mips/fw/arc/memory.c

162

pr_err("Too many ROM DATA regions");

arch/mips/generic/board-realtek.c

21

pr_err("/chosen node not found\n");

arch/mips/generic/board-realtek.c

35

pr_err("unable to set initrd-start: %d\n", err);

arch/mips/generic/board-realtek.c

41

pr_err("unable to set initrd-end: %d\n", err);

arch/mips/generic/board-sead3.c

108

pr_err("error searching for UART DT node: %d\n", uart_off);

arch/mips/generic/board-sead3.c

114

pr_err("unable to find ethernet DT node: %d\n", eth_off);

arch/mips/generic/board-sead3.c

120

pr_err("unable to set ethernet interrupt-parent: %d\n", err);

arch/mips/generic/board-sead3.c

126

pr_err("unable to set ethernet interrupts property: %d\n", err);

arch/mips/generic/board-sead3.c

132

pr_err("unable to find EHCI DT node: %d\n", ehci_off);

arch/mips/generic/board-sead3.c

138

pr_err("unable to set EHCI interrupt-parent: %d\n", err);

arch/mips/generic/board-sead3.c

144

pr_err("unable to set EHCI interrupts property: %d\n", err);

arch/mips/generic/board-sead3.c

63

pr_err("unable to find DT GIC node: %d\n", gic_off);

arch/mips/generic/board-sead3.c

69

pr_err("unable to nop GIC node\n");

arch/mips/generic/board-sead3.c

76

pr_err("unable to find CPU intc node: %d\n", cpu_off);

arch/mips/generic/board-sead3.c

82

pr_err("unable to get CPU intc phandle\n");

arch/mips/generic/board-sead3.c

99

pr_err("unable to set UART interrupts property: %d\n",

arch/mips/generic/init.c

132

pr_err("Failed to open FDT\n");

arch/mips/generic/init.c

139

pr_err("Failed to apply FDT fixup \"%s\"\n",

arch/mips/generic/init.c

147

pr_err("Failed to pack FDT\n");

arch/mips/generic/init.c

165

pr_err("Failed to get CPU node\n");

arch/mips/generic/init.c

171

pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));

arch/mips/generic/yamon-dt.c

126

pr_err("Unable to find or add memory DT node: %d\n", mem_off);

arch/mips/generic/yamon-dt.c

132

pr_err("Unable to set memory node device_type: %d\n", err);

arch/mips/generic/yamon-dt.c

141

pr_err("Unable to set memory regs property: %d\n", err);

arch/mips/generic/yamon-dt.c

150

pr_err("Unable to set linux,usable-memory property: %d\n", err);

arch/mips/generic/yamon-dt.c

220

pr_err("Unable to find or add DT chosen node: %d\n",

arch/mips/generic/yamon-dt.c

227

pr_err("Unable to set stdout-path property: %d\n", err);

arch/mips/generic/yamon-dt.c

29

pr_err("Unable to find or add DT chosen node: %d\n",

arch/mips/generic/yamon-dt.c

36

pr_err("Unable to set bootargs property: %d\n", err);

arch/mips/include/asm/mc146818-time.h

20

pr_err("Unable to read current time from RTC\n");

arch/mips/include/asm/octeon/cvmx-pow.h

1900

pr_err("POW static priorities should be "

arch/mips/jazz/irq.c

139

pr_err("Failed to register R4030 timer interrupt\n");

arch/mips/kernel/cevt-bcm1480.c

137

pr_err("Failed to request irq %d (%s)\n", irq, name);

arch/mips/kernel/cevt-r4k.c

325

pr_err("Failed to request irq %d (timer)\n", irq);

arch/mips/kernel/cevt-sb1250.c

137

pr_err("Failed to request irq %d (%s)\n", irq, name);

arch/mips/kernel/cevt-txx9.c

200

pr_err("Failed to request irq %d (txx9tmr)\n", irq);

arch/mips/kernel/cpu-probe.c

609

pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n",

arch/mips/kernel/i8253.c

27

pr_err("Failed to request irq 0 (timer)\n");

arch/mips/kernel/mips-cm.c

285

pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n",

arch/mips/kernel/mips-cm.c

460

pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error,

arch/mips/kernel/mips-cm.c

462

pr_err("CM_ADDR =%08llx\n", cm_addr);

arch/mips/kernel/mips-cm.c

463

pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]);

arch/mips/kernel/mips-cm.c

528

pr_err("CM_ERROR=%llx %s <%s>\n", cm_error,

arch/mips/kernel/mips-cm.c

530

pr_err("CM_ADDR =%llx\n", cm_addr);

arch/mips/kernel/mips-cm.c

531

pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]);

arch/mips/kernel/mips-r2-to-r6-emul.c

1994

pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");

arch/mips/kernel/mips-r2-to-r6-emul.c

2050

pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");

arch/mips/kernel/mips-r2-to-r6-emul.c

2113

pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");

arch/mips/kernel/mips-r2-to-r6-emul.c

2174

pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n");

arch/mips/kernel/module.c

165

pr_err("module %s: dangerous R_MIPS_LO16 relocation\n", me->name);

arch/mips/kernel/module.c

178

pr_err("module %s: dangerous R_MIPS_PC%u relocation\n",

arch/mips/kernel/module.c

192

pr_err("module %s: relocation overflow\n", me->name);

arch/mips/kernel/module.c

296

pr_err("%s: Unknown relocation type %u\n", me->name, type);

arch/mips/kernel/module.c

42

pr_err("module %s: dangerous R_MIPS_26 relocation\n",

arch/mips/kernel/module.c

48

pr_err("module %s: relocation overflow\n",

arch/mips/kernel/pm-cps.c

648

pr_err("Failed to generate core %u state %u entry\n",

arch/mips/kernel/pm-cps.c

660

pr_err("Failed allocate core %u ready_count\n", core);

arch/mips/kernel/relocate.c

101

pr_err("R_MIPS_26 REL relocation overflow\n");

arch/mips/kernel/relocate.c

141

pr_err("Unhandled relocation type %d at 0x%p\n", type,

arch/mips/kernel/relocate.c

89

pr_err("Dangerous R_MIPS_26 REL relocation\n");

arch/mips/kernel/rtlx-mt.c

117

pr_err("APRP RTLX init on non-vectored-interrupt processor\n");

arch/mips/kernel/rtlx-mt.c

87

pr_err("rtlx_module_init: unable to register device\n");

arch/mips/kernel/rtlx.c

147

pr_err(" *vpe_get_shared is NULL. Has an SP program been loaded?\n");

arch/mips/kernel/rtlx.c

185

pr_err("rtlx_release() with null rtlx\n");

arch/mips/kernel/rtlx.c

58

pr_err("no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);

arch/mips/kernel/setup.c

157

pr_err("initrd start must be page aligned\n");

arch/mips/kernel/setup.c

173

pr_err("initrd start < PAGE_OFFSET\n");

arch/mips/kernel/setup.c

350

pr_err("mem parameter is empty, do nothing\n");

arch/mips/kernel/setup.c

387

pr_err("\"memmap=exactmap\" invalid on MIPS\n");

arch/mips/kernel/setup.c

400

pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on MIPS\n");

arch/mips/kernel/setup.c

407

pr_err("\"memmap\" invalid format!\n");

arch/mips/kernel/smp-cps.c

272

pr_err("Failed to allocate CPS vectors\n");

arch/mips/kernel/smp-cps.c

305

pr_err("core_entry address unsuitable, disabling smp-cps\n");

arch/mips/kernel/traps.c

1850

pr_err("Error bits: %s%s%s%s%s%s%s%s\n",

arch/mips/kernel/traps.c

1860

pr_err("Error bits: %s%s%s%s%s%s%s\n",

arch/mips/kernel/traps.c

1891

pr_err("FTLB error exception, cp0_errctl=0x%08x:\n",

arch/mips/kernel/traps.c

1893

pr_err("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());

arch/mips/kernel/traps.c

1895

pr_err("c0_cacheerr == %08x\n", reg_val);

arch/mips/kernel/traps.c

1898

pr_err("Decoded c0_cacheerr: FTLB parity error\n");

arch/mips/kernel/traps.c

1900

pr_err("Decoded c0_cacheerr: %s cache fault in %s reference.\n",

arch/mips/kernel/traps.c

1905

pr_err("FTLB error exception\n");

arch/mips/kernel/vpe-mt.c

360

pr_err("vpe_class registration failed\n");

arch/mips/kernel/vpe-mt.c

371

pr_err("Adding vpe_device failed\n");

arch/mips/kernel/vpe.c

606

pr_err("VPE loader: program length %u truncated\n", len);

arch/mips/kernel/vpe.c

623

pr_err("VPE program length %u truncated\n",

arch/mips/lantiq/clk.c

91

pr_err("clk %s.%s: trying to set invalid rate %ld\n",

arch/mips/lantiq/falcon/sysctrl.c

223

pr_err("Failed to request core resources");

arch/mips/lantiq/falcon/sysctrl.c

84

pr_err("module de/activation failed %d %08X %08X %08X\n",

arch/mips/lantiq/irq.c

187

pr_err("invalid type %d for irq %ld\n",

arch/mips/lantiq/irq.c

353

pr_err("Failed to request icu%i memory\n", vpe);

arch/mips/lantiq/irq.c

406

pr_err("Failed to request eiu memory");

arch/mips/lantiq/xway/gptu.c

100

pr_err("gptu: failed to request irq\n");

arch/mips/lantiq/xway/sysctrl.c

472

pr_err("Failed to request core resources");

arch/mips/loongson2ef/common/bonito-irq.c

44

pr_err("Failed to request irq %d (dma_timeout)\n", i);

arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c

133

pr_err("Failed to register timer interrupt\n");

arch/mips/loongson2ef/fuloong-2e/irq.c

60

pr_err("Failed to request irq %d (cascade)\n", irq);

arch/mips/loongson2ef/fuloong-2e/irq.c

64

pr_err("Failed to request irq %d (cascade)\n", irq);

arch/mips/loongson2ef/lemote-2f/irq.c

112

pr_err("Failed to register north bridge cascade interrupt\n");

arch/mips/loongson2ef/lemote-2f/irq.c

116

pr_err("Failed to register south bridge cascade interrupt\n");

arch/mips/loongson2ef/lemote-2f/pm.c

33

pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port."

arch/mips/loongson2ef/lemote-2f/pm.c

44

pr_err("i8042.c: Failed to enable KBD port.\n");

arch/mips/loongson64/boardinfo.c

41

pr_err("lefi: Firmware registration failed.\n");

arch/mips/loongson64/env.c

105

pr_err("Failed to open FDT to fix up\n");

arch/mips/loongson64/env.c

153

pr_err("Unexpected UART address 0x%llx passed by firmware\n",

arch/mips/loongson64/env.c

165

pr_err("Couldn't fix up FDT node for UART 0x%llx\n",

arch/mips/loongson64/env.c

351

pr_err("Failed to determine built-in Loongson64 dtb\n");

arch/mips/loongson64/hpet.c

246

pr_err("Failed to request irq %d (hpet)\n", HPET_T0_IRQ);

arch/mips/loongson64/smp.c

449

pr_err("SMP Groups are less than the number of CPUs\n");

arch/mips/loongson64/smp.c

495

pr_err("Failed to request IPI IRQ\n");

arch/mips/loongson64/time.c

27

pr_err("Failed to get CPU node\n");

arch/mips/loongson64/time.c

33

pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));

arch/mips/math-emu/dp_2008class.c

49

pr_err("Unknown class: %d\n", xc);

arch/mips/math-emu/sp_2008class.c

49

pr_err("Unknown class: %d\n", xc);

arch/mips/mm/c-octeon.c

324

pr_err("Core%lu: Cache error exception:\n", coreid);

arch/mips/mm/c-octeon.c

325

pr_err("cp0_errorepc == %lx\n", read_c0_errorepc());

arch/mips/mm/c-octeon.c

327

pr_err("CacheErr (Icache) == %llx\n",

arch/mips/mm/c-octeon.c

332

pr_err("CacheErr (Dcache) == %llx\n",

arch/mips/mti-malta/malta-int.c

222

pr_err("Failed to request irq %d (CoreHi)\n", corehi_irq);

arch/mips/mti-malta/malta-time.c

211

pr_err("mti,gic-timer device node not found\n");

arch/mips/mti-malta/malta-time.c

216

pr_err("error updating gic frequency property\n");

arch/mips/pci/msi-octeon.c

139

pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",

arch/mips/pci/pci-octeon.c

704

pr_err("Registration of co_pci_edac failed!\n");

arch/mips/pci/pci-rc32434.c

120

pr_err("PCI init error!!!\n");

arch/mips/pci/pci-rt2880.c

181

pr_err("%s:%s[%d] trying to alloc unknown pci irq\n",

arch/mips/pci/pcie-octeon.c

1699

pr_err(" pcie cfg_read retries failed. retry_cnt=%d\n",

arch/mips/pic32/pic32mzda/init.c

30

pr_err("pic32: no DTB found.\n");

arch/mips/ralink/ill_acc.c

65

pr_err("%pOFn: failed to lookup pdev\n", np);

arch/mips/ralink/irq.c

167

pr_err("Failed to request intc memory");

arch/mips/ralink/mt7621.c

37

pr_err("Cannot get memory resource\n");

arch/mips/sgi-ip22/ip22-eisa.c

135

pr_err("Failed to request irq %d (EISA)\n", SGI_EISA_IRQ);

arch/mips/sgi-ip22/ip22-int.c

296

pr_err("Failed to register local0 cascade interrupt\n");

arch/mips/sgi-ip22/ip22-int.c

299

pr_err("Failed to register local1 cascade interrupt\n");

arch/mips/sgi-ip22/ip22-int.c

302

pr_err("Failed to register Bus Error interrupt\n");

arch/mips/sgi-ip22/ip22-int.c

307

pr_err("Failed to register mapable0 cascade interrupt\n");

arch/mips/sgi-ip22/ip22-int.c

311

pr_err("Failed to register mapable1 cascade interrupt\n");

arch/mips/sgi-ip32/ip32-irq.c

490

pr_err("Failed to register CRIME memory error interrupt\n");

arch/mips/sgi-ip32/ip32-irq.c

493

pr_err("Failed to register CRIME CPU error interrupt\n");

arch/mips/sni/a20r.c

232

pr_err("Failed to register ISA interrupt\n");

arch/mips/sni/pcit.c

249

pr_err("Failed to register ISA interrupt\n");

arch/mips/sni/pcit.c

264

pr_err("Failed to register ISA interrupt\n");

arch/mips/sni/rm200.c

411

pr_err("Failed to register cascade interrupt\n");

arch/mips/sni/rm200.c

477

pr_err("Failed to register onboard ISA interrupt\n");

arch/mips/sni/rm200.c

480

pr_err("Failed to register ISA interrupt\n");

arch/mips/sni/time.c

71

pr_err("Failed to register a20r-timer interrupt\n");

arch/mips/txx9/generic/pci.c

222

pr_err("PCI: Failed to allocate resources.\n");

arch/mips/txx9/generic/setup.c

485

pr_err("Failed to register clocks: %d\n", error);

arch/mips/txx9/generic/setup_tx4927.c

71

pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc);

arch/mips/txx9/generic/setup_tx4927.c

72

pr_err("ccfg:%llx, toea:%llx\n",

arch/mips/txx9/generic/setup_tx4938.c

73

pr_err("%cBE exception at %#lx\n", data ? 'D' : 'I', regs->cp0_epc);

arch/mips/txx9/generic/setup_tx4938.c

74

pr_err("ccfg:%llx, toea:%llx\n",

arch/nios2/include/asm/pgtable.h

234

pr_err("%s:%d: bad pte %08lx.\n", \

arch/nios2/include/asm/pgtable.h

237

pr_err("%s:%d: bad pgd %08lx.\n", \

arch/nios2/kernel/cpuinfo.c

20

pr_err("ERROR: Nios II " x " different for kernel and DTS\n")

arch/nios2/kernel/misaligned.c

155

pr_err("fault during kernel misaligned fixup @ %#lx; addr 0x%08x; isn=0x%08x\n",

arch/nios2/kernel/misaligned.c

159

pr_err("fault during user misaligned fixup @ %#lx; isn=%08x addr=0x%08x sp=0x%08lx pid=%d\n",

arch/nios2/kernel/misaligned.c

177

pr_err("kernel unaligned access @ %#lx; BADADDR 0x%08x; cause=%d, isn=0x%08x\n",

arch/nios2/kernel/misaligned.c

193

pr_err("user unaligned access @ %#lx; isn=0x%08lx ea=0x%08lx ra=0x%08lx sp=0x%08lx\n",

arch/nios2/kernel/module.c

103

pr_err("module %s: Unknown reloc: %u\n",

arch/nios2/kernel/module.c

60

pr_err("module %s: relocation overflow\n",

arch/nios2/kernel/module.c

70

pr_err("module %s: dangerous relocation\n",

arch/nios2/kernel/module.c

75

pr_err("module %s: relocation overflow\n",

arch/nios2/mm/ioremap.c

185

pr_err("iounmap: bad address %p\n", addr);

arch/nios2/mm/ioremap.c

40

pr_err("remap_area_pte: page already exists\n");

arch/openrisc/kernel/module.c

73

pr_err("module %s: Unknown relocation: %u\n",

arch/parisc/kernel/cache.c

534

pr_err("INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %pD\n",

arch/parisc/kernel/drivers.c

513

pr_err("Two devices have hardware path [%s]. IODC data for second device: %7phN\n"

arch/parisc/kernel/irq.c

557

pr_err("Failed to register timer interrupt\n");

arch/parisc/kernel/irq.c

561

pr_err("Failed to register IPI interrupt\n");

arch/parisc/kernel/perf.c

796

pr_err("perf_write_image: ioremap failed!\n");

arch/parisc/net/bpf_jit_comp32.c

1261

pr_err("bpf-jit: BPF_END imm %d invalid\n", imm);

arch/parisc/net/bpf_jit_comp32.c

1291

pr_err("bpf-jit: BPF_END imm %d invalid\n", imm);

arch/parisc/net/bpf_jit_comp32.c

1460

pr_err("bpf-jit: unknown opcode %02x\n", code);

arch/parisc/net/bpf_jit_comp64.c

1093

pr_err("bpf-jit: unknown opcode %02x\n", code);

arch/parisc/net/bpf_jit_comp64.c

765

pr_err("bpf-jit: BPF_END imm %d invalid\n", imm);

arch/parisc/net/bpf_jit_core.c

134

pr_err("bpf-jit: image did not converge in <%d passes!\n", i);

arch/powerpc/crypto/aes_cbc.c

37

pr_err("Failed to allocate cbc(aes) fallback: %ld\n",

arch/powerpc/crypto/aes_ctr.c

36

pr_err("Failed to allocate ctr(aes) fallback: %ld\n",

arch/powerpc/crypto/aes_xts.c

39

pr_err("Failed to allocate xts(aes) fallback: %ld\n",

arch/powerpc/include/asm/book3s/32/pgtable.h

207

pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))

arch/powerpc/include/asm/book3s/64/pgtable.h

995

pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))

arch/powerpc/include/asm/book3s/64/pgtable.h

997

pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))

arch/powerpc/include/asm/book3s/64/pgtable.h

999

pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))

arch/powerpc/include/asm/nohash/32/pgtable.h

55

pr_err("%s:%d: bad pgd %08llx.\n", __FILE__, __LINE__, (unsigned long long)pgd_val(e))

arch/powerpc/include/asm/nohash/64/pgtable-4k.h

86

pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))

arch/powerpc/include/asm/nohash/64/pgtable.h

163

pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))

arch/powerpc/include/asm/nohash/64/pgtable.h

165

pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))

arch/powerpc/kernel/dt_cpu_ftrs.c

165

pr_err("%s could not advertise to user (no hwcap bits)\n", f->name);

arch/powerpc/kernel/dt_cpu_ftrs.c

198

pr_err("CPU feature: %s could not advertise to user (no hwcap bits)\n", f->name);

arch/powerpc/kernel/dt_cpu_ftrs.c

214

pr_err("CPU feature hypervisor present in device tree but HV mode not enabled in the CPU. Ignoring.\n");

arch/powerpc/kernel/dt_cpu_ftrs.c

814

pr_err("hypervisor not present in device tree but HV mode is enabled in the CPU. Enabling.\n");

arch/powerpc/kernel/eeh.c

1691

pr_err("%s: expected 4 args, got %d\n", __func__, ret);

arch/powerpc/kernel/eeh.c

542

pr_err("EEH: Failure of PHB#%x-PE#%x will be handled at parent PHB#%x-PE#%x.\n",

arch/powerpc/kernel/eeh.c

741

pr_err("%s: No PE found on PCI device %s\n",

arch/powerpc/kernel/eeh_driver.c

1075

pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n"

arch/powerpc/kernel/eeh_driver.c

1106

pr_err("%s: PCI bus for PHB#%x-PE#%x disappeared\n",

arch/powerpc/kernel/eeh_driver.c

1228

pr_err("%s: Cannot find PCI bus for "

arch/powerpc/kernel/eeh_driver.c

851

pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n",

arch/powerpc/kernel/eeh_driver.c

888

pr_err("EEH: Recovering PHB#%x, location: %s\n",

arch/powerpc/kernel/eeh_driver.c

893

pr_err("EEH: Recovering PHB#%x-PE#%x\n",

arch/powerpc/kernel/eeh_driver.c

895

pr_err("EEH: PE location: %s, PHB location: %s\n",

arch/powerpc/kernel/eeh_driver.c

909

pr_err("EEH: Frozen PHB#%x-PE#%x detected\n",

arch/powerpc/kernel/eeh_driver.c

913

pr_err("EEH: Call Trace:\n");

arch/powerpc/kernel/eeh_driver.c

915

pr_err("EEH: [%p] %pS\n", ptrs[i], ptrs[i]);

arch/powerpc/kernel/eeh_driver.c

928

pr_err("EEH: PHB#%x-PE#%x has failed %d times in the last hour and has been permanently disabled.\n",

arch/powerpc/kernel/eeh_event.c

109

pr_err("EEH: out of memory, event not handled\n");

arch/powerpc/kernel/eeh_event.c

150

pr_err("EEH: Event dropped due to no_recover setting\n");

arch/powerpc/kernel/eeh_event.c

86

pr_err("%s: Failed to start EEH daemon (%d)\n",

arch/powerpc/kernel/eeh_pe.c

355

pr_err("%s: out of memory!\n", __func__);

arch/powerpc/kernel/eeh_pe.c

370

pr_err("%s: No PHB PE is found (PHB Domain=%d)\n",

arch/powerpc/kernel/eeh_pe.c

87

pr_err("%s: out of memory!\n", __func__);

arch/powerpc/kernel/fadump.c

117

pr_err("Failed to init cma area for firmware-assisted dump,%d\n", rc);

arch/powerpc/kernel/fadump.c

1490

pr_err("Appending parameters exceeds cmdline size!\n");

arch/powerpc/kernel/fadump.c

1582

pr_err("failed to create fadump kobject\n");

arch/powerpc/kernel/fadump.c

1589

pr_err("unable to create bootargs_append sysfs file (%d)\n", rc);

arch/powerpc/kernel/fadump.c

1598

pr_err("unable to create release_mem sysfs file (%d)\n",

arch/powerpc/kernel/fadump.c

1604

pr_err("sysfs group creation failed (%d), unregistering FADump",

arch/powerpc/kernel/fadump.c

1621

pr_err("unable to create fadump_enabled symlink (%d)", rc);

arch/powerpc/kernel/fadump.c

1629

pr_err("unable to create fadump_registered symlink (%d)", rc);

arch/powerpc/kernel/fadump.c

1640

pr_err("unable to create fadump_release_mem symlink (%d)",

arch/powerpc/kernel/fadump.c

1662

pr_err("Failed to allocate %lu bytes for elfcorehdr\n",

arch/powerpc/kernel/fadump.c

1679

pr_err("Old magic number, can't process the dump.\n");

arch/powerpc/kernel/fadump.c

1685

pr_err("Endianness mismatch between the crashed and fadump kernels.\n");

arch/powerpc/kernel/fadump.c

1687

pr_err("Fadump header is corrupted.\n");

arch/powerpc/kernel/fadump.c

1698

pr_err("Fadump header size mismatch.\n");

arch/powerpc/kernel/fadump.c

1711

pr_err("Crash info header is empty.\n");

arch/powerpc/kernel/fadump.c

573

pr_err("Can't enable fadump with boot memory size (0x%lx) less than 0x%llx\n",

arch/powerpc/kernel/fadump.c

579

pr_err("Too many holes in boot memory area to enable fadump\n");

arch/powerpc/kernel/fadump.c

622

pr_err("Failed to find memory chunk for reservation!\n");

arch/powerpc/kernel/fadump.c

636

pr_err("Failed to reserve memory!\n");

arch/powerpc/kernel/fadump.c

806

pr_err("Failed to allocate %ld bytes for CPU notes buffer\n",

arch/powerpc/kernel/fadump.c

855

pr_err("Insufficient memory for setting up %s memory ranges\n",

arch/powerpc/kernel/fadump.c

899

pr_err("Reached array size limit for %s memory ranges\n",

arch/powerpc/kernel/iommu.c

741

pr_err("%s: Can't allocate %ld bytes\n", __func__, sz);

arch/powerpc/kernel/irq.c

197

pr_err("do_IRQ: stack overflow: %ld\n", sp);

arch/powerpc/kernel/isa-bridge.c

73

pr_err("ISA: Bad CPU mapping: %s\n", __func__);

arch/powerpc/kernel/isa-bridge.c

97

pr_err("no ISA IO ranges or unexpected isa range, mapping 64k\n");

arch/powerpc/kernel/mce.c

438

pr_err("Machine Check Exception, Unknown event version %d !\n",

arch/powerpc/kernel/module_32.c

135

pr_err("Module doesn't contain .plt or .init.plt sections.\n");

arch/powerpc/kernel/module_32.c

277

pr_err("%s: unknown ADD relocation: %u\n",

arch/powerpc/kernel/module_64.c

1071

pr_err("%s: Unknown ADD relocation: %lu\n",

arch/powerpc/kernel/module_64.c

1090

pr_err("%s: stub %lx not in module %s\n", __func__, addr, mod->name);

arch/powerpc/kernel/module_64.c

1098

pr_err("%s: fault reading magic for stub %lx for %s\n", __func__, addr, mod->name);

arch/powerpc/kernel/module_64.c

1103

pr_err("%s: bad magic for stub %lx for %s\n", __func__, addr, mod->name);

arch/powerpc/kernel/module_64.c

1109

pr_err("%s: fault reading funcdata for stub %lx for %s\n", __func__, addr, mod->name);

arch/powerpc/kernel/module_64.c

470

pr_err("%s: doesn't contain .stubs.\n", me->name);

arch/powerpc/kernel/module_64.c

476

pr_err("%s: doesn't contain .mygot.\n", me->name);

arch/powerpc/kernel/module_64.c

536

pr_err("%s: Address of stub entry is not 8-byte aligned\n", me->name);

arch/powerpc/kernel/module_64.c

547

pr_err("%s: Address of %ps out of range of 34-bit relative address.\n",

arch/powerpc/kernel/module_64.c

558

pr_err("%s: Address of %ps out of range of kernel_toc.\n",

arch/powerpc/kernel/module_64.c

633

pr_err("%s: Address of stub entry is not 8-byte aligned\n", me->name);

arch/powerpc/kernel/module_64.c

649

pr_err("%s: Address of %p out of range of 34-bit relative address.\n",

arch/powerpc/kernel/module_64.c

665

pr_err("%s: Address %p of stub out of range of %p.\n",

arch/powerpc/kernel/module_64.c

784

pr_err("%s: Expected nop after call, got %08x at %pS\n",

arch/powerpc/kernel/module_64.c

855

pr_err("%s: bad TOC16 relocation (0x%lx)\n",

arch/powerpc/kernel/module_64.c

876

pr_err("%s: bad TOC16_DS relocation (0x%lx)\n",

arch/powerpc/kernel/module_64.c

889

pr_err("%s: bad TOC16_LO_DS relocation (0x%lx)\n",

arch/powerpc/kernel/module_64.c

930

pr_err("%s: REL24 %li out of range!\n",

arch/powerpc/kernel/module_64.c

953

pr_err("%s: REL32 %li out of range!\n",

arch/powerpc/kernel/module_64.c

969

pr_err("%s: REL34 %li out of range!\n",

arch/powerpc/kernel/nvram_64.c

202

pr_err("%s: Failed nvram_write (%d)\n", __func__, rc);

arch/powerpc/kernel/nvram_64.c

208

pr_err("%s: Failed nvram_write (%d)\n", __func__, rc);

arch/powerpc/kernel/nvram_64.c

238

pr_err("%s: Failed nvram_read (%d)\n", __func__, rc);

arch/powerpc/kernel/nvram_64.c

245

pr_err("%s: Failed nvram_read (%d)\n", __func__, rc);

arch/powerpc/kernel/nvram_64.c

306

pr_err("nvram: Failed to find or create %s"

arch/powerpc/kernel/nvram_64.c

359

pr_err("nvram: compression failed; returned %d\n", zipped_len);

arch/powerpc/kernel/nvram_64.c

360

pr_err("nvram: logging uncompressed oops/panic report\n");

arch/powerpc/kernel/nvram_64.c

478

pr_err("nvram: Failed to find partition %s, "

arch/powerpc/kernel/nvram_64.c

559

pr_err("nvram: pstore_register() failed, returned %d. "

arch/powerpc/kernel/nvram_64.c

579

pr_err("nvram: Failed to initialize oops partition!");

arch/powerpc/kernel/nvram_64.c

588

pr_err("nvram: Failed to initialize oops partition!");

arch/powerpc/kernel/nvram_64.c

594

pr_err("nvram: No memory for %s partition\n",

arch/powerpc/kernel/nvram_64.c

617

pr_err("nvram: No memory for compression workspace; "

arch/powerpc/kernel/nvram_64.c

624

pr_err("No memory for uncompressed %s data; "

arch/powerpc/kernel/nvram_64.c

631

pr_err("nvram: kmsg_dump_register() failed; returned %d\n", rc);

arch/powerpc/kernel/nvram_64.c

673

pr_err("%s: ignoring unrecognized KMSG_DUMP_* reason %d\n",

arch/powerpc/kernel/nvram_64.c

895

pr_err("%s: kmalloc failed\n", __func__);

arch/powerpc/kernel/nvram_64.c

907

pr_err("%s: nvram_write_header failed (%d)\n", __func__, rc);

arch/powerpc/kernel/nvram_64.c

920

pr_err("%s: nvram_write_header failed (%d)\n",

arch/powerpc/kernel/nvram_64.c

935

pr_err("%s: nvram_write failed (%d)\n",

arch/powerpc/kernel/pci-common.c

1669

pr_err("Failed to create bus for PCI domain %04x\n",

arch/powerpc/kernel/proc_powerpc.c

103

pr_err("Failed to create link /proc/ppc64 -> /proc/powerpc\n");

arch/powerpc/kernel/rtas.c

1297

pr_err("too many extended delays, giving up\n");

arch/powerpc/kernel/rtas.c

1410

pr_err("%s: unexpected error %d\n", __func__, rtas_rc);

arch/powerpc/kernel/rtas.c

1706

pr_err("ibm,activate-firmware failed (%i)\n", fwrc);

arch/powerpc/kernel/rtas.c

1996

pr_err("'%s' has duplicate function table entries\n",

arch/powerpc/kernel/rtas.c

1999

pr_err("function table unsorted: '%s' wrongly precedes '%s'\n",

arch/powerpc/kernel/secvar-sysfs.c

186

pr_err("error getting secvar from firmware %d\n", rc);

arch/powerpc/kernel/secvar-sysfs.c

227

pr_err("Failed to create firmware kobj\n");

arch/powerpc/kernel/secvar-sysfs.c

233

pr_err("Failed to create format object\n");

arch/powerpc/kernel/secvar-sysfs.c

240

pr_err("sysfs kobject registration failed\n");

arch/powerpc/kernel/secvar-sysfs.c

247

pr_err("Cannot read the size of the attribute\n");

arch/powerpc/kernel/secvar-sysfs.c

253

pr_err("Failed to create softlink to PLPKS config directory");

arch/powerpc/kernel/secvar-sysfs.c

266

pr_err("Failed to create variable attributes\n");

arch/powerpc/kernel/secvar-sysfs.c

31

pr_err("Error %zd reading format string\n", len);

arch/powerpc/kernel/secvar-sysfs.c

33

pr_err("Got empty format string from backend\n");

arch/powerpc/kernel/secvar-sysfs.c

48

pr_err("Error retrieving %s variable size %d\n", kobj->name, rc);

arch/powerpc/kernel/secvar-sysfs.c

66

pr_err("Error getting %s variable size %d\n", kobj->name, rc);

arch/powerpc/kernel/secvar-sysfs.c

77

pr_err("Error getting %s variable %d\n", kobj->name, rc);

arch/powerpc/kernel/secvar-sysfs.c

97

pr_err("Error setting the %s variable %d\n", kobj->name, rc);

arch/powerpc/kernel/setup-common.c

653

pr_err("No suitable machine description found !\n");

arch/powerpc/kernel/smp.c

1338

pr_err("smp: failed starting cpu %d (rc %d)\n", cpu, rc);

arch/powerpc/kernel/trace/ftrace.c

139

pr_err("No module loaded at addr=%lx\n", ip);

arch/powerpc/kernel/trace/ftrace.c

173

pr_err("0x%lx (0x%lx): Unexpected target address 0x%lx\n",

arch/powerpc/kernel/trace/ftrace.c

190

pr_err("0x%lx (0x%lx): No ftrace stubs reachable\n", ip, rec->ip);

arch/powerpc/kernel/trace/ftrace.c

258

pr_err("%s: ftrace ool stub out of range (%p -> %p).\n",

arch/powerpc/kernel/trace/ftrace.c

535

pr_err("0x%lx: expected (bl) != found (%08lx)\n", ip, ppc_inst_as_ulong(old));

arch/powerpc/kernel/trace/ftrace.c

641

pr_err("Address of %ps out of range of pcrel address.\n",

arch/powerpc/kernel/trace/ftrace.c

655

pr_err("Address of %ps out of range of kernel_toc.\n",

arch/powerpc/kernel/trace/ftrace.c

81

pr_err("0x%lx: fetching instruction failed\n", ip);

arch/powerpc/kernel/trace/ftrace.c

95

pr_err("0x%lx: expected (%08lx) != found (%08lx)\n",

arch/powerpc/kernel/trace/ftrace_64_pg.c

126

pr_err("No module loaded at addr=%lx\n", rec->ip);

arch/powerpc/kernel/trace/ftrace_64_pg.c

147

pr_err("Fetching opcode failed.\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

153

pr_err("Not expected bl: opcode is %08lx\n", ppc_inst_as_ulong(op));

arch/powerpc/kernel/trace/ftrace_64_pg.c

163

pr_err("Failed to get trampoline target\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

172

pr_err("addr %lx does not match expected %lx\n", ptr, entry);

arch/powerpc/kernel/trace/ftrace_64_pg.c

178

pr_err("Fetching instruction at %lx failed.\n", ip - 4);

arch/powerpc/kernel/trace/ftrace_64_pg.c

185

pr_err("Unexpected instruction %08lx around bl _mcount\n",

arch/powerpc/kernel/trace/ftrace_64_pg.c

195

pr_err("Fetching op failed.\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

200

pr_err("Expected %08lx found %08lx\n", PPC_INST_LD_TOC,

arch/powerpc/kernel/trace/ftrace_64_pg.c

227

pr_err("Patching NOP failed.\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

333

pr_err("Fetching opcode failed.\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

339

pr_err("Not expected bl: opcode is %08lx\n", ppc_inst_as_ulong(op));

arch/powerpc/kernel/trace/ftrace_64_pg.c

351

pr_err("No ftrace trampolines reachable from %ps\n",

arch/powerpc/kernel/trace/ftrace_64_pg.c

358

pr_err("Patching NOP failed.\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

425

pr_err("Unexpected call sequence at %p: %08lx %08lx\n", ip,

arch/powerpc/kernel/trace/ftrace_64_pg.c

433

pr_err("No ftrace trampoline\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

443

pr_err("Failed to get trampoline target\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

452

pr_err("addr %lx does not match expected %lx\n", ptr, entry);

arch/powerpc/kernel/trace/ftrace_64_pg.c

457

pr_err("REL24 out of range!\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

484

pr_err("Unknown ftrace addr to patch: %ps\n", (void *)ptr);

arch/powerpc/kernel/trace/ftrace_64_pg.c

490

pr_err("Unable to read ftrace location %p\n", ip);

arch/powerpc/kernel/trace/ftrace_64_pg.c

495

pr_err("Unexpected call sequence at %p: %08lx\n",

arch/powerpc/kernel/trace/ftrace_64_pg.c

502

pr_err("No ftrace trampolines reachable from %ps\n", ip);

arch/powerpc/kernel/trace/ftrace_64_pg.c

507

pr_err("Error patching branch to ftrace tramp!\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

555

pr_err("No ftrace trampoline\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

561

pr_err("Fetching opcode failed.\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

567

pr_err("Not expected bl: opcode is %08lx\n", ppc_inst_as_ulong(op));

arch/powerpc/kernel/trace/ftrace_64_pg.c

580

pr_err("Failed to get trampoline target\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

588

pr_err("addr %lx does not match expected %lx\n", ptr, entry);

arch/powerpc/kernel/trace/ftrace_64_pg.c

597

pr_err("REL24 out of range!\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

610

pr_err("Failed to get trampoline target\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

619

pr_err("addr %lx does not match expected %lx\n", ptr, entry);

arch/powerpc/kernel/trace/ftrace_64_pg.c

624

pr_err("REL24 out of range!\n");

arch/powerpc/kernel/trace/ftrace_64_pg.c

736

pr_err("Address of %ps out of range of kernel_toc.\n",

arch/powerpc/kernel/trace/ftrace_64_pg.c

77

pr_err("%p: replaced (%08lx) != old (%08lx)", (void *)ip,

arch/powerpc/kernel/traps.c

1800

pr_err("Failed to fetch the user instruction\n");

arch/powerpc/kernel/traps.c

1818

pr_err("DSCR based mfspr emulation failed\n");

arch/powerpc/kexec/core_64.c

476

pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));

arch/powerpc/kexec/core_64.c

503

pr_err("Malformed device tree: error reading /cpus node: %s\n",

arch/powerpc/kexec/core_64.c

520

pr_err("Failed to delete a cpus sub-node: %s\n", fdt_strerror(ret));

arch/powerpc/kexec/core_64.c

533

pr_err("No /cpus node found\n");

arch/powerpc/kexec/core_64.c

548

pr_err("Unable to add %s subnode: %s\n", dn->full_name,

arch/powerpc/kexec/crash.c

442

pr_err("Failed to get crash mem range\n");

arch/powerpc/kexec/crash.c

455

pr_err("Failed to remove hot-unplugged memory from crash memory ranges\n");

arch/powerpc/kexec/crash.c

462

pr_err("Failed to prepare elf header\n");

arch/powerpc/kexec/crash.c

473

pr_err("Updated crash elfcorehdr elfsz %lu > memsz %lu", elfsz, memsz);

arch/powerpc/kexec/crash.c

533

pr_err("Unable to locate FDT segment.\n");

arch/powerpc/kexec/crash.c

544

pr_err("Failed to update crash FDT");

arch/powerpc/kexec/elf_64.c

115

pr_err("Error setting up the new device tree.\n");

arch/powerpc/kexec/elf_64.c

147

pr_err("Error setting up the purgatory.\n");

arch/powerpc/kexec/elf_64.c

68

pr_err("Loading purgatory failed.\n");

arch/powerpc/kexec/elf_64.c

78

pr_err("Failed to load kdump kernel segments\n");

arch/powerpc/kexec/elf_64.c

86

pr_err("Setting up cmdline for kdump kernel failed\n");

arch/powerpc/kexec/file_load.c

50

pr_err("Appending elfcorehdr=<addr> exceeds cmdline size\n");

arch/powerpc/kexec/file_load_64.c

159

pr_err("linux,drconf-usable-memory property already exists!");

arch/powerpc/kexec/file_load_64.c

205

pr_err("Buffer (%d) too small for memory node: %pOF\n",

arch/powerpc/kexec/file_load_64.c

214

pr_err("Malformed device tree: error reading %s\n", path);

arch/powerpc/kexec/file_load_64.c

279

pr_err("Usable memory ranges for kdump kernel not found\n");

arch/powerpc/kexec/file_load_64.c

287

pr_err("Malformed device tree: error reading /ibm,dynamic-reconfiguration-memory.\n");

arch/powerpc/kexec/file_load_64.c

305

pr_err("Could not setup linux,drconf-usable-memory property for kdump\n");

arch/powerpc/kexec/file_load_64.c

312

pr_err("Failed to update fdt with linux,drconf-usable-memory property: %s",

arch/powerpc/kexec/file_load_64.c

325

pr_err("Failed to set linux,usable-memory property for %s node",

arch/powerpc/kexec/file_load_64.c

443

pr_err("Failed to prepare elf headers for the core\n");

arch/powerpc/kexec/file_load_64.c

498

pr_err("Failed to load backup segment\n");

arch/powerpc/kexec/file_load_64.c

506

pr_err("Failed to load elfcorehdr segment\n");

arch/powerpc/kexec/file_load_64.c

585

pr_err("Failed to setup purgatory symbols");

arch/powerpc/kexec/file_load_64.c

772

pr_err("Error setting up usable-memory property for kdump kernel\n");

arch/powerpc/kexec/file_load_64.c

783

pr_err("Error reserving crash memory: %s\n",

arch/powerpc/kexec/file_load_64.c

792

pr_err("Error reserving memory for backup: %s\n",

arch/powerpc/kexec/file_load_64.c

821

pr_err("Error updating memory reserve map: %s\n",

arch/powerpc/kexec/file_load_64.c

853

pr_err("Failed to setup exclude memory ranges for buffer lookup\n");

arch/powerpc/kexec/ranges.c

454

pr_err("Failed to setup reserved memory ranges\n");

arch/powerpc/kexec/ranges.c

503

pr_err("Failed to setup exclude memory ranges\n");

arch/powerpc/kexec/ranges.c

549

pr_err("Failed to setup usable memory ranges\n");

arch/powerpc/kexec/ranges.c

641

pr_err("Failed to setup crash memory ranges\n");

arch/powerpc/kvm/book3s_64_mmu_hv.c

1876

pr_err("%s ret %ld i=%ld v=%lx r=%lx\n", __func__, ret, i, v, r);

arch/powerpc/kvm/book3s_64_mmu_hv.c

251

pr_err("KVM: map_vrma at %lx failed, ret=%ld\n",

arch/powerpc/kvm/book3s_64_mmu_hv.c

304

pr_err("KVM: Oops, kvmppc_h_enter returned too hard!\n");

arch/powerpc/kvm/book3s_64_mmu_radix.c

350

pr_err("KVM: TLB page invalidation hcall failed, rc=%ld\n", rc);

arch/powerpc/kvm/book3s_64_mmu_radix.c

371

pr_err("KVM: TLB PWC invalidation hcall failed, rc=%ld\n", rc);

arch/powerpc/kvm/book3s_64_mmu_radix.c

937

pr_err("KVM: Got unsupported MMU fault\n");

arch/powerpc/kvm/book3s_64_mmu_radix.c

942

pr_err("KVM: Got radix HV page fault with DSISR=%lx\n", dsisr);

arch/powerpc/kvm/book3s_hv.c

3219

pr_err("KVM: couldn't grab cpu %d\n", cpu);

arch/powerpc/kvm/book3s_hv.c

3386

pr_err("KVM: CPU %d seems to be stuck\n", cpu + i);

arch/powerpc/kvm/book3s_hv.c

4280

pr_err("KVM Guest Run VCPU hcall failed\n");

arch/powerpc/kvm/book3s_hv.c

4282

pr_err("KVM: Guest Run VCPU invalid element id at %ld\n", i);

arch/powerpc/kvm/book3s_hv.c

4284

pr_err("KVM: Guest Run VCPU invalid element size at %ld\n", i);

arch/powerpc/kvm/book3s_hv.c

4286

pr_err("KVM: Guest Run VCPU invalid element value at %ld\n", i);

arch/powerpc/kvm/book3s_hv.c

490

pr_err("vcpu %p (%d):\n", vcpu, vcpu->vcpu_id);

arch/powerpc/kvm/book3s_hv.c

491

pr_err("pc = %.16lx msr = %.16llx trap = %x\n",

arch/powerpc/kvm/book3s_hv.c

494

pr_err("r%2d = %.16lx r%d = %.16lx\n",

arch/powerpc/kvm/book3s_hv.c

497

pr_err("ctr = %.16lx lr = %.16lx\n",

arch/powerpc/kvm/book3s_hv.c

499

pr_err("srr0 = %.16llx srr1 = %.16llx\n",

arch/powerpc/kvm/book3s_hv.c

501

pr_err("sprg0 = %.16llx sprg1 = %.16llx\n",

arch/powerpc/kvm/book3s_hv.c

503

pr_err("sprg2 = %.16llx sprg3 = %.16llx\n",

arch/powerpc/kvm/book3s_hv.c

505

pr_err("cr = %.8lx xer = %.16lx dsisr = %.8x\n",

arch/powerpc/kvm/book3s_hv.c

507

pr_err("dar = %.16llx\n", vcpu->arch.shregs.dar);

arch/powerpc/kvm/book3s_hv.c

508

pr_err("fault dar = %.16lx dsisr = %.8x\n",

arch/powerpc/kvm/book3s_hv.c

510

pr_err("SLB (%d entries):\n", vcpu->arch.slb_max);

arch/powerpc/kvm/book3s_hv.c

512

pr_err(" ESID = %.16llx VSID = %.16llx\n",

arch/powerpc/kvm/book3s_hv.c

514

pr_err("lpcr = %.16lx sdr1 = %.16lx last_inst = %.16lx\n",

arch/powerpc/kvm/book3s_hv.c

5494

pr_err("KVM: Couldn't alloc HPT\n");

arch/powerpc/kvm/book3s_hv.c

5727

pr_err("KVM: Create Guest hcall failed, rc=%ld\n", rc);

arch/powerpc/kvm/book3s_hv.c

6599

pr_err("KVM-HV: Host does not support TLBIE\n");

arch/powerpc/kvm/book3s_hv.c

6632

pr_err("KVM-HV: Cannot determine method for accessing XICS\n");

arch/powerpc/kvm/book3s_hv.c

6657

pr_err("KVM-HV: kvmppc_uvmem_init failed %d\n", r);

arch/powerpc/kvm/book3s_hv_nested.c

1587

pr_err("KVM: L1 guest page shift (%d) less than our own (%d)\n",

arch/powerpc/kvm/book3s_hv_nested.c

464

pr_err("kvm-hv: Could not configure parent hypervisor capabilities (rc=%ld)",

arch/powerpc/kvm/book3s_hv_nested.c

483

pr_err("kvm-hv: failed to allocated nested partition table\n");

arch/powerpc/kvm/book3s_hv_nested.c

490

pr_err("kvm-hv: Parent hypervisor does not support nesting (rc=%ld)\n",

arch/powerpc/kvm/book3s_hv_nested.c

533

pr_err("KVM: TLB LPID invalidation hcall failed, rc=%ld\n", rc);

arch/powerpc/kvm/book3s_hv_nestedv2.c

1007

pr_err("KVM-NESTEDv2: couldn't reload ptregs\n");

arch/powerpc/kvm/book3s_hv_nestedv2.c

1044

pr_err("KVM: Create Guest vcpu hcall failed, rc=%ld\n", rc);

arch/powerpc/kvm/book3s_hv_nestedv2.c

671

pr_err("KVM-NESTEDv2: couldn't get vcpu run output buffer minimum size\n");

arch/powerpc/kvm/book3s_hv_nestedv2.c

689

pr_err("KVM-NESTEDv2: couldn't set vcpu run output buffer\n");

arch/powerpc/kvm/book3s_hv_nestedv2.c

714

pr_err("KVM-NESTEDv2: couldn't set vcpu run input buffer\n");

arch/powerpc/kvm/book3s_hv_nestedv2.c

804

pr_err("KVM-NESTEDv2: couldn't get GSID: 0x%x\n", iden);

arch/powerpc/kvm/book3s_hv_nestedv2.c

834

pr_err("KVM-NESTEDv2: couldn't set guest wide elements\n");

arch/powerpc/kvm/book3s_hv_nestedv2.c

842

pr_err("KVM-NESTEDv2: couldn't fill vcpu run input buffer\n");

arch/powerpc/kvm/book3s_hv_nestedv2.c

894

pr_err("KVM-NESTEDv2: couldn't set the PATE\n");

arch/powerpc/kvm/book3s_hv_nestedv2.c

928

pr_err("KVM-NESTEDv2: couldn't register the L2 VPA (rc=%d)\n", rc);

arch/powerpc/kvm/book3s_hv_uvmem.c

631

pr_err("Can't find VMA for gfn:0x%lx\n", gfn);

arch/powerpc/kvm/book3s_hv_uvmem.c

646

pr_err("Can't page out gpa:0x%lx addr:0x%lx\n",

arch/powerpc/kvm/book3s_xive.c

1589

pr_err("Failed to set VCPU affinity for host IRQ %ld\n", host_irq);

arch/powerpc/kvm/book3s_xive.c

1688

pr_err("Failed to clr VCPU affinity for host IRQ %ld\n", host_irq);

arch/powerpc/kvm/book3s_xive.c

1946

pr_err("inconsistent save-restore setup for VCPU %d\n", cpu);

arch/powerpc/kvm/book3s_xive.c

1958

pr_err("Failed to allocate xive irq for VCPU IPI\n");

arch/powerpc/kvm/book3s_xive.c

1974

pr_err("Failed to enable VP in OPAL, err %d\n", r);

arch/powerpc/kvm/book3s_xive.c

2004

pr_err("Failed to configure queue %d for VCPU %d\n",

arch/powerpc/kvm/book3s_xive.c

2049

pr_err("invalid irq 0x%x in cpu queue!\n", irq);

arch/powerpc/kvm/book3s_xive.c

2059

pr_err("Interrupt 0x%x is marked in a queue but P not set !\n", irq);

arch/powerpc/kvm/book3s_xive.c

881

pr_err("Failed to map escalation interrupt for queue %d of VCPU %d\n",

arch/powerpc/kvm/book3s_xive.c

893

pr_err("Failed to allocate escalation irq name for queue %d of VCPU %d\n",

arch/powerpc/kvm/book3s_xive.c

904

pr_err("Failed to request escalation interrupt for queue %d of VCPU %d\n",

arch/powerpc/kvm/book3s_xive.c

949

pr_err("Failed to allocate queue %d for VCPU %d\n",

arch/powerpc/kvm/book3s_xive.c

965

pr_err("Failed to configure queue %d for VCPU %d\n",

arch/powerpc/kvm/book3s_xive_native.c

165

pr_err("Failed to get VP info from OPAL: %d\n", rc);

arch/powerpc/kvm/book3s_xive_native.c

170

pr_err("inconsistent save-restore setup for VCPU %d\n", server_num);

arch/powerpc/kvm/book3s_xive_native.c

181

pr_err("Failed to enable VP in OPAL: %d\n", rc);

arch/powerpc/kvm/book3s_xive_native.c

275

pr_err("%s: accessing invalid ESB page for source %lx !\n",

arch/powerpc/kvm/book3s_xive_native.c

359

pr_err("Failed to create block...\n");

arch/powerpc/kvm/book3s_xive_native.c

366

pr_err("fault getting user info !\n");

arch/powerpc/kvm/book3s_xive_native.c

379

pr_err("Failed to allocate IRQ !\n");

arch/powerpc/kvm/book3s_xive_native.c

500

pr_err("invalid priority for queue %d for VCPU %d\n",

arch/powerpc/kvm/book3s_xive_native.c

590

pr_err("Can't find server %d\n", server);

arch/powerpc/kvm/book3s_xive_native.c

596

pr_err("Trying to restore invalid queue %d for VCPU %d\n",

arch/powerpc/kvm/book3s_xive_native.c

614

pr_err("Failed to reset queue %d for VCPU %d: %d\n",

arch/powerpc/kvm/book3s_xive_native.c

630

pr_err("invalid flags %d\n", kvm_eq.flags);

arch/powerpc/kvm/book3s_xive_native.c

636

pr_err("invalid queue size %d\n", kvm_eq.qshift);

arch/powerpc/kvm/book3s_xive_native.c

641

pr_err("queue page is not aligned %llx/%llx\n", kvm_eq.qaddr,

arch/powerpc/kvm/book3s_xive_native.c

659

pr_err("Couldn't get queue page %llx!\n", kvm_eq.qaddr);

arch/powerpc/kvm/book3s_xive_native.c

681

pr_err("Failed to configure queue %d for VCPU %d: %d\n",

arch/powerpc/kvm/book3s_xive_native.c

735

pr_err("Can't find server %d\n", server);

arch/powerpc/kvm/book3s_xive_native.c

741

pr_err("invalid priority for queue %d for VCPU %d\n",

arch/powerpc/kvm/e500_mmu_host.c

358

pr_err("%s: real page not found for gfn %lx\n",

arch/powerpc/kvm/e500_mmu_host.c

723

pr_err("%s: need to know host tlb size\n", __func__);

arch/powerpc/kvm/e500_mmu_host.c

735

pr_err("%s: bad tlb0 host config: %u entries %u ways\n",

arch/powerpc/kvm/mpic.c

1145

pr_err("%s: bad raised IRQ %d ctpr %d ivpr 0x%08x\n",

arch/powerpc/kvm/powerpc.c

2490

pr_err("%s: Out of memory\n", __func__);

arch/powerpc/kvm/powerpc.c

2492

pr_err("%s: No LPIDs free\n", __func__);

arch/powerpc/lib/test-code-patching.c

27

pr_err("code-patching: test failed at line %d\n", __LINE__); \

arch/powerpc/mm/book3s32/mmu.c

269

pr_err("%s: no BAT available for mapping 0x%llx\n", __func__,

arch/powerpc/mm/book3s64/hash_utils.c

425

pr_err("%s: memblock for linear map (%lu) failed\n", __func__,

arch/powerpc/mm/book3s64/hash_utils.c

434

pr_err("%s: memblock for kfence pool (%lu) failed\n", __func__,

arch/powerpc/mm/book3s64/hash_utils.c

910

pr_err("Invalid penc for base_shift=%d "

arch/powerpc/mm/book3s64/pgtable.c

603

pr_err("disable_tlbie: Unable to disable TLBIE with Hash MMU.\n");

arch/powerpc/mm/book3s64/slb.c

240

pr_err("SLB contents of cpu 0x%x\n", smp_processor_id());

arch/powerpc/mm/book3s64/slb.c

250

pr_err("%02d %016lx %016lx %s\n", i, e, v,

arch/powerpc/mm/book3s64/slb.c

258

pr_err(" 1T ESID=%9lx VSID=%13lx LLP:%3lx\n",

arch/powerpc/mm/book3s64/slb.c

262

pr_err(" 256M ESID=%9lx VSID=%13lx LLP:%3lx\n",

arch/powerpc/mm/book3s64/slb.c

270

pr_err("SLB RR allocator index %d\n", get_paca()->stab_rr);

arch/powerpc/mm/book3s64/slb.c

273

pr_err("SLB cache ptr value = %d\n", get_paca()->slb_save_cache_ptr);

arch/powerpc/mm/book3s64/slb.c

274

pr_err("Valid SLB cache entries:\n");

arch/powerpc/mm/book3s64/slb.c

277

pr_err("%02d EA[0-35]=%9x\n", i, get_paca()->slb_cache[i]);

arch/powerpc/mm/book3s64/slb.c

278

pr_err("Rest of SLB cache entries:\n");

arch/powerpc/mm/book3s64/slb.c

280

pr_err("%02d EA[0-35]=%9x\n", i, get_paca()->slb_cache[i]);

arch/powerpc/mm/fault.c

151

pr_err("MCE: Killing %s:%d due to hardware memory corruption fault at %lx\n",

arch/powerpc/net/bpf_jit_comp.c

1107

pr_err("0x%lx: fetching instruction failed\n", (unsigned long)ip);

arch/powerpc/net/bpf_jit_comp.c

1112

pr_err("0x%lx: expected (%08lx) != found (%08lx)\n",

arch/powerpc/net/bpf_jit_comp.c

1183

pr_err("%s (0x%lx): kernel/modules are not supported\n", __func__, bpf_func);

arch/powerpc/net/bpf_jit_comp.c

1193

pr_err("%s (0x%lx): calls are not supported in bpf prog body\n", __func__,

arch/powerpc/net/bpf_jit_comp.c

1220

pr_err("%s (0x%lx): bpf prog too large, ool stub out of branch range\n", __func__,

arch/powerpc/net/bpf_jit_comp64.c

178

pr_err("BPF JIT is asking about unknown registers");

arch/powerpc/net/bpf_jit_comp64.c

462

pr_err("eBPF: address of %ps out of range of kernel_toc.\n", (void *)func);

arch/powerpc/perf/hv-24x7.c

1049

pr_err("h_get_24x7_catalog_page(ver=%lld, page=%lld) failed:"

arch/powerpc/perf/hv-24x7.c

1305

pr_err("Error: result of request %hhu has %hu elements\n",

arch/powerpc/perf/hv-24x7.c

1673

pr_err("hv_24x7: CPU hotplug init failed\n");

arch/powerpc/perf/hv-24x7.c

789

pr_err("invalid page count: %zu\n", catalog_page_len);

arch/powerpc/perf/hv-24x7.c

807

pr_err("invalid event data offs %zu and/or len %zu\n",

arch/powerpc/perf/hv-24x7.c

814

pr_err("event data %zu-%zu does not fit inside catalog 0-%zu\n",

arch/powerpc/perf/hv-24x7.c

823

pr_err("event_entry_count %zu is invalid\n", event_entry_count);

arch/powerpc/perf/hv-24x7.c

836

pr_err("could not allocate event data\n");

arch/powerpc/perf/hv-24x7.c

855

pr_err("Failed to get event data in page %zu: rc=%ld\n",

arch/powerpc/perf/hv-gpci.c

865

pr_err("hv_gpci: CPU hotplug init failed\n");

arch/powerpc/perf/imc-pmu.c

1154

pr_err("thread-imc: Unable to start the counter\

arch/powerpc/perf/imc-pmu.c

1183

pr_err("thread-imc: Unable to stop the counters\

arch/powerpc/perf/imc-pmu.c

1382

pr_err("trace-imc: Unable to start the counters for core %d\n", core_id);

arch/powerpc/perf/imc-pmu.c

1426

pr_err("trace-imc: Unable to stop the counters for core %d\n", core_id);

arch/powerpc/perf/imc-pmu.c

501

pr_err("nest-imc: Unable to stop the counters for core %d\n", node_id);

arch/powerpc/perf/imc-pmu.c

579

pr_err("nest-imc: Unable to start the counters for node %d\n",

arch/powerpc/perf/imc-pmu.c

802

pr_err("IMC: Unable to stop the counters for core %d\n", core_id);

arch/powerpc/perf/imc-pmu.c

863

pr_err("core-imc: Unable to start the counters for core %d\n",

arch/powerpc/platforms/44x/fsp2.c

100

pr_err("BESR0: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR0));

arch/powerpc/platforms/44x/fsp2.c

101

pr_err("BESR1: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR1));

arch/powerpc/platforms/44x/fsp2.c

102

pr_err("BEARH: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARH));

arch/powerpc/platforms/44x/fsp2.c

103

pr_err("BEARL: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARL));

arch/powerpc/platforms/44x/fsp2.c

105

pr_err("\nPLB4 Arbiter:\n");

arch/powerpc/platforms/44x/fsp2.c

106

pr_err("P0ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRH));

arch/powerpc/platforms/44x/fsp2.c

107

pr_err("P0ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRL));

arch/powerpc/platforms/44x/fsp2.c

108

pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH));

arch/powerpc/platforms/44x/fsp2.c

109

pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH));

arch/powerpc/platforms/44x/fsp2.c

110

pr_err("P1ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRH));

arch/powerpc/platforms/44x/fsp2.c

111

pr_err("P1ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRL));

arch/powerpc/platforms/44x/fsp2.c

112

pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH));

arch/powerpc/platforms/44x/fsp2.c

113

pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH));

arch/powerpc/platforms/44x/fsp2.c

120

pr_err("\nPLB4-to-AHB Bridge:\n");

arch/powerpc/platforms/44x/fsp2.c

121

pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_ESR));

arch/powerpc/platforms/44x/fsp2.c

122

pr_err("SEUAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SEUAR));

arch/powerpc/platforms/44x/fsp2.c

123

pr_err("SELAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SELAR));

arch/powerpc/platforms/44x/fsp2.c

125

pr_err("\nAHB-to-PLB4 Bridge:\n");

arch/powerpc/platforms/44x/fsp2.c

126

pr_err("\nESR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_ESR));

arch/powerpc/platforms/44x/fsp2.c

127

pr_err("\nEAR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_EAR));

arch/powerpc/platforms/44x/fsp2.c

132

pr_err("CMU Error\n");

arch/powerpc/platforms/44x/fsp2.c

133

pr_err("FIR0: 0x%08x\n", mfcmu(CMUN_FIR0));

arch/powerpc/platforms/44x/fsp2.c

138

pr_err("Configuration Logic Error\n");

arch/powerpc/platforms/44x/fsp2.c

139

pr_err("CONF_FIR: 0x%08x\n", mfdcr(DCRN_CONF_FIR_RWC));

arch/powerpc/platforms/44x/fsp2.c

140

pr_err("RPERR0: 0x%08x\n", mfdcr(DCRN_CONF_RPERR0));

arch/powerpc/platforms/44x/fsp2.c

141

pr_err("RPERR1: 0x%08x\n", mfdcr(DCRN_CONF_RPERR1));

arch/powerpc/platforms/44x/fsp2.c

150

pr_err("DDR: Uncorrectable Error\n");

arch/powerpc/platforms/44x/fsp2.c

151

pr_err("MCSTAT: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

153

pr_err("MCOPT1: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

155

pr_err("MCOPT2: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

157

pr_err("PHYSTAT: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

159

pr_err("CFGR0: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

161

pr_err("CFGR1: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

163

pr_err("CFGR2: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

165

pr_err("CFGR3: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

167

pr_err("SCRUB_CNTL: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

169

pr_err("ECCERR_PORT0: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

171

pr_err("ECCERR_ADDR_PORT0: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

173

pr_err("ECCERR_CNT_PORT0: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

175

pr_err("ECC_CHECK_PORT0: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

177

pr_err("MCER0: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

179

pr_err("MCER1: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

181

pr_err("BESR: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

183

pr_err("BEARL: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

185

pr_err("BEARH: 0x%08x\n",

arch/powerpc/platforms/44x/fsp2.c

208

pr_err("device tree node %pOFn is missing a interrupt",

arch/powerpc/platforms/44x/fsp2.c

215

pr_err("fsp_of_probe: request_irq failed: np=%pOF rc=%d",

arch/powerpc/platforms/44x/fsp2.c

47

pr_err("L2 Controller:\n");

arch/powerpc/platforms/44x/fsp2.c

48

pr_err("MCK: 0x%08x\n", mfl2(L2MCK));

arch/powerpc/platforms/44x/fsp2.c

49

pr_err("INT: 0x%08x\n", mfl2(L2INT));

arch/powerpc/platforms/44x/fsp2.c

50

pr_err("PLBSTAT0: 0x%08x\n", mfl2(L2PLBSTAT0));

arch/powerpc/platforms/44x/fsp2.c

51

pr_err("PLBSTAT1: 0x%08x\n", mfl2(L2PLBSTAT1));

arch/powerpc/platforms/44x/fsp2.c

52

pr_err("ARRSTAT0: 0x%08x\n", mfl2(L2ARRSTAT0));

arch/powerpc/platforms/44x/fsp2.c

53

pr_err("ARRSTAT1: 0x%08x\n", mfl2(L2ARRSTAT1));

arch/powerpc/platforms/44x/fsp2.c

54

pr_err("ARRSTAT2: 0x%08x\n", mfl2(L2ARRSTAT2));

arch/powerpc/platforms/44x/fsp2.c

55

pr_err("CPUSTAT: 0x%08x\n", mfl2(L2CPUSTAT));

arch/powerpc/platforms/44x/fsp2.c

56

pr_err("RACSTAT0: 0x%08x\n", mfl2(L2RACSTAT0));

arch/powerpc/platforms/44x/fsp2.c

57

pr_err("WACSTAT0: 0x%08x\n", mfl2(L2WACSTAT0));

arch/powerpc/platforms/44x/fsp2.c

58

pr_err("WACSTAT1: 0x%08x\n", mfl2(L2WACSTAT1));

arch/powerpc/platforms/44x/fsp2.c

59

pr_err("WACSTAT2: 0x%08x\n", mfl2(L2WACSTAT2));

arch/powerpc/platforms/44x/fsp2.c

60

pr_err("WDFSTAT: 0x%08x\n", mfl2(L2WDFSTAT));

arch/powerpc/platforms/44x/fsp2.c

61

pr_err("LOG0: 0x%08x\n", mfl2(L2LOG0));

arch/powerpc/platforms/44x/fsp2.c

62

pr_err("LOG1: 0x%08x\n", mfl2(L2LOG1));

arch/powerpc/platforms/44x/fsp2.c

63

pr_err("LOG2: 0x%08x\n", mfl2(L2LOG2));

arch/powerpc/platforms/44x/fsp2.c

64

pr_err("LOG3: 0x%08x\n", mfl2(L2LOG3));

arch/powerpc/platforms/44x/fsp2.c

65

pr_err("LOG4: 0x%08x\n", mfl2(L2LOG4));

arch/powerpc/platforms/44x/fsp2.c

66

pr_err("LOG5: 0x%08x\n", mfl2(L2LOG5));

arch/powerpc/platforms/44x/fsp2.c

71

pr_err("\nPLBOPB Bridge %d:\n", num);

arch/powerpc/platforms/44x/fsp2.c

72

pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0));

arch/powerpc/platforms/44x/fsp2.c

73

pr_err("GESR1: 0x%08x\n", mfdcr(base + PLB4OPB_GESR1));

arch/powerpc/platforms/44x/fsp2.c

74

pr_err("GESR2: 0x%08x\n", mfdcr(base + PLB4OPB_GESR2));

arch/powerpc/platforms/44x/fsp2.c

75

pr_err("GEARU: 0x%08x\n", mfdcr(base + PLB4OPB_GEARU));

arch/powerpc/platforms/44x/fsp2.c

76

pr_err("GEAR: 0x%08x\n", mfdcr(base + PLB4OPB_GEAR));

arch/powerpc/platforms/44x/fsp2.c

81

pr_err("Bus Error\n");

arch/powerpc/platforms/44x/fsp2.c

85

pr_err("\nPLB6 Controller:\n");

arch/powerpc/platforms/44x/fsp2.c

86

pr_err("BC_SHD: 0x%08x\n", mfdcr(DCRN_PLB6_SHD));

arch/powerpc/platforms/44x/fsp2.c

87

pr_err("BC_ERR: 0x%08x\n", mfdcr(DCRN_PLB6_ERR));

arch/powerpc/platforms/44x/fsp2.c

89

pr_err("\nPLB6-to-PLB4 Bridge:\n");

arch/powerpc/platforms/44x/fsp2.c

90

pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_ESR));

arch/powerpc/platforms/44x/fsp2.c

91

pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARH));

arch/powerpc/platforms/44x/fsp2.c

92

pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARL));

arch/powerpc/platforms/44x/fsp2.c

94

pr_err("\nPLB4-to-PLB6 Bridge:\n");

arch/powerpc/platforms/44x/fsp2.c

95

pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_ESR));

arch/powerpc/platforms/44x/fsp2.c

96

pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARH));

arch/powerpc/platforms/44x/fsp2.c

97

pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARL));

arch/powerpc/platforms/44x/fsp2.c

99

pr_err("\nPLB6-to-MCIF Bridge:\n");

arch/powerpc/platforms/44x/hsta_msi.c

61

pr_err("%s: Failed mapping irq %d\n", __func__, irq);

arch/powerpc/platforms/44x/hsta_msi.c

80

pr_err(

arch/powerpc/platforms/44x/iss4xx.c

101

pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);

arch/powerpc/platforms/44x/ppc476.c

171

pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",

arch/powerpc/platforms/512x/mpc512x_lpbfifo.c

130

pr_err("bogus LPBFIFO callback\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

214

pr_err("No DIU node\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

221

pr_err("Can't map DIU\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

234

pr_err("Can't map DIU area desc.\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

253

pr_err("Can't map DIU area desc.\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

290

pr_err("%s: reserve bootmem failed\n", __func__);

arch/powerpc/platforms/512x/mpc512x_shared.c

393

pr_err("%s: no compatible devices found\n", __func__);

arch/powerpc/platforms/512x/mpc512x_shared.c

40

pr_err("Restart module not mapped.\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

411

pr_err("%s: Can't map %pOF device\n",

arch/powerpc/platforms/512x/mpc512x_shared.c

418

pr_err("%s: no fifo space available for %pOF\n",

arch/powerpc/platforms/512x/mpc512x_shared.c

65

pr_err("Could not find DIU device tree node.\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

75

pr_err("Could not lookup DIU clock.\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

79

pr_err("Could not enable DIU clock.\n");

arch/powerpc/platforms/512x/pdm360ng.c

57

pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__);

arch/powerpc/platforms/512x/pdm360ng.c

64

pr_err("%s: Can't map gpio regs.\n", __func__);

arch/powerpc/platforms/52xx/media5200.c

185

pr_err("Could not find Media5200 FPGA; PCI interrupts will not work\n");

arch/powerpc/platforms/52xx/mpc52xx_common.c

103

pr_err(__FILE__ ": Error while populating devices from DT\n");

arch/powerpc/platforms/52xx/mpc52xx_common.c

265

pr_err(__FILE__ ": Unable to determine PSC, no ac97 "

arch/powerpc/platforms/52xx/mpc52xx_gpt.c

427

pr_err("calculation error; prescale:%x clocks:%llx\n",

arch/powerpc/platforms/52xx/mpc52xx_gpt.c

669

pr_err("%s: cannot register watchdog device\n", WDT_IDENTITY);

arch/powerpc/platforms/52xx/mpc52xx_pm.c

76

pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n");

arch/powerpc/platforms/52xx/mpc52xx_pm.c

85

pr_err("mpc52xx_pm_prepare(): could not map registers\n");

arch/powerpc/platforms/82xx/km82xx.c

34

pr_err("PIC init: can not find cpm-pic node\n");

arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c

51

pr_err("MCU status reg read failed.\n");

arch/powerpc/platforms/83xx/mpc832x_rdb.c

114

pr_err("%pOF: registration failed\n", np);

arch/powerpc/platforms/85xx/bsc913x_qds.c

29

pr_err("bsc913x: Failed to allocate MPIC structure\n");

arch/powerpc/platforms/85xx/bsc913x_rdb.c

25

pr_err("bsc913x: Failed to allocate MPIC structure\n");

arch/powerpc/platforms/85xx/mpc85xx_8259.c

54

pr_err("i8259: Failed to map cascade interrupt\n");

arch/powerpc/platforms/85xx/mpc85xx_mds.c

242

pr_err("mpc85xx-rdb: could not map global utilities register\n");

arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c

100

pr_err("Could not map guts node address\n");

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

73

pr_err("mpc85xx-rdb: could not map global utilities register\n");

arch/powerpc/platforms/85xx/p1022_ds.c

183

pr_err("p1022ds: missing global utilities device node\n");

arch/powerpc/platforms/85xx/p1022_ds.c

189

pr_err("p1022ds: could not map global utilities device\n");

arch/powerpc/platforms/85xx/p1022_ds.c

195

pr_err("p1022ds: missing localbus node\n");

arch/powerpc/platforms/85xx/p1022_ds.c

201

pr_err("p1022ds: could not map localbus node\n");

arch/powerpc/platforms/85xx/p1022_ds.c

207

pr_err("p1022ds: missing local access window node\n");

arch/powerpc/platforms/85xx/p1022_ds.c

213

pr_err("p1022ds: could not map local access window node\n");

arch/powerpc/platforms/85xx/p1022_ds.c

219

pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");

arch/powerpc/platforms/85xx/p1022_ds.c

241

pr_err("p1022ds: CS0 and/or CS1 is not programmed\n");

arch/powerpc/platforms/85xx/p1022_ds.c

265

pr_err("p1022ds: could not determine physical address for CS0"

arch/powerpc/platforms/85xx/p1022_ds.c

271

pr_err("p1022ds: could not determine physical address for CS1"

arch/powerpc/platforms/85xx/p1022_ds.c

278

pr_err("p1022ds: could not ioremap CS0 address %llx\n",

arch/powerpc/platforms/85xx/p1022_ds.c

284

pr_err("p1022ds: could not ioremap CS1 address %llx\n",

arch/powerpc/platforms/85xx/p1022_ds.c

298

pr_err("p1022ds: missing pixis node\n");

arch/powerpc/platforms/85xx/p1022_ds.c

305

pr_err("p1022ds: could not map pixis registers\n");

arch/powerpc/platforms/85xx/p1022_ds.c

348

pr_err("p1022ds: unsupported monitor port %i\n", port);

arch/powerpc/platforms/85xx/p1022_ds.c

384

pr_err("p1022ds: missing global utilities device node\n");

arch/powerpc/platforms/85xx/p1022_ds.c

391

pr_err("p1022ds: could not map global utilities device\n");

arch/powerpc/platforms/85xx/p1022_rdk.c

54

pr_err("p1022rdk: missing global utilities device node\n");

arch/powerpc/platforms/85xx/p1022_rdk.c

61

pr_err("p1022rdk: could not map global utilities device\n");

arch/powerpc/platforms/85xx/smp.c

152

pr_err("CPU%d didn't die...\n", cpu);

arch/powerpc/platforms/85xx/smp.c

201

pr_err("No cpu-release-addr for cpu %d\n", cpu);

arch/powerpc/platforms/85xx/smp.c

242

pr_err("timeout waiting for cpu %d to reset\n",

arch/powerpc/platforms/85xx/smp.c

327

pr_err("Do not support more than 2 threads per CPU.");

arch/powerpc/platforms/85xx/socrates_fpga_pic.c

284

pr_err("FPGA PIC: Unable to allocate host\n");

arch/powerpc/platforms/85xx/t1042rdb_diu.c

42

pr_err("%s: Could not map cpld registers\n", __func__);

arch/powerpc/platforms/85xx/t1042rdb_diu.c

64

pr_err("%s: Unsupported monitor port %i\n", __func__, port);

arch/powerpc/platforms/85xx/t1042rdb_diu.c

86

pr_err("%s: Missing scfg node. Can not display video.\n",

arch/powerpc/platforms/85xx/t1042rdb_diu.c

94

pr_err("%s: Could not map device. Can not display video.\n",

arch/powerpc/platforms/85xx/twr_p102x.c

68

pr_err("twr_p1025: could not map global utilities register\n");

arch/powerpc/platforms/8xx/machine_check.c

15

pr_err("Machine check in kernel mode.\n");

arch/powerpc/platforms/8xx/machine_check.c

16

pr_err("Caused by (from SRR1=%lx): ", reason);

arch/powerpc/platforms/book3s/vas-api.c

298

pr_err("copy_from_user() returns %d\n", rc);

arch/powerpc/platforms/book3s/vas-api.c

303

pr_err("Invalid window open API version\n");

arch/powerpc/platforms/book3s/vas-api.c

308

pr_err("VAS API is not registered\n");

arch/powerpc/platforms/book3s/vas-api.c

409

pr_err("Unexpected fault on paste address with TX window closed\n");

arch/powerpc/platforms/book3s/vas-api.c

424

pr_err("No previous mapping with paste address\n");

arch/powerpc/platforms/book3s/vas-api.c

482

pr_err("No attached VAS window for the paste address mmap\n");

arch/powerpc/platforms/book3s/vas-api.c

492

pr_err("Invalid paste address mmaping\n");

arch/powerpc/platforms/book3s/vas-api.c

533

pr_err("No send window open?\n");

arch/powerpc/platforms/book3s/vas-api.c

538

pr_err("VAS API is not registered\n");

arch/powerpc/platforms/book3s/vas-api.c

555

pr_err("Window is not active\n");

arch/powerpc/platforms/book3s/vas-api.c

561

pr_err("Window paste address failed\n");

arch/powerpc/platforms/book3s/vas-api.c

615

pr_err("Unable to allocate coproc major number: %i\n", rc);

arch/powerpc/platforms/book3s/vas-api.c

625

pr_err("Unable to create %s class %d\n", name, rc);

arch/powerpc/platforms/book3s/vas-api.c

638

pr_err("cdev_add() failed %d\n", rc);

arch/powerpc/platforms/book3s/vas-api.c

646

pr_err("Unable to create coproc-%d %d\n", MINOR(devno), rc);

arch/powerpc/platforms/book3s/vas-api.c

83

pr_err("pid(%d): mm_struct is not found\n",

arch/powerpc/platforms/chrp/setup.c

530

pr_err("Failed to register XMON break interrupt\n");

arch/powerpc/platforms/embedded6xx/flipper-pic.c

133

pr_err("no parent found\n");

arch/powerpc/platforms/embedded6xx/flipper-pic.c

137

pr_err("unexpected parent compatible\n");

arch/powerpc/platforms/embedded6xx/flipper-pic.c

143

pr_err("no io memory range found\n");

arch/powerpc/platforms/embedded6xx/flipper-pic.c

156

pr_err("failed to allocate irq_domain\n");

arch/powerpc/platforms/embedded6xx/hlwd-pic.c

135

pr_err("spurious interrupt!\n");

arch/powerpc/platforms/embedded6xx/hlwd-pic.c

165

pr_err("no io memory range found\n");

arch/powerpc/platforms/embedded6xx/hlwd-pic.c

170

pr_err("ioremap failed\n");

arch/powerpc/platforms/embedded6xx/hlwd-pic.c

182

pr_err("failed to allocate irq_domain\n");

arch/powerpc/platforms/embedded6xx/mvme5100.c

132

pr_err("HAWK PHB not present?\n");

arch/powerpc/platforms/embedded6xx/mvme5100.c

139

pr_err("HAWK PHB mibar not correctly set?\n");

arch/powerpc/platforms/embedded6xx/mvme5100.c

63

pr_err("Could not find open-pic node\n");

arch/powerpc/platforms/embedded6xx/wii.c

66

pr_err("no compatible node found for %s\n", compatible);

arch/powerpc/platforms/embedded6xx/wii.c

71

pr_err("no valid reg found for %pOFn\n", np);

arch/powerpc/platforms/microwatt/smp.c

51

pr_err("Failed to map SYSCON\n");

arch/powerpc/platforms/pasemi/gpio_mdio.c

247

pr_err("%s: Cannot register as MDIO bus, err %d\n",

arch/powerpc/platforms/pasemi/setup.c

265

pr_err("Failed to locate the MPIC interrupt controller\n");

arch/powerpc/platforms/pasemi/setup.c

274

pr_err("No platform-open-pic property.\n");

arch/powerpc/platforms/pasemi/setup.c

324

pr_err("NMI delivered\n");

arch/powerpc/platforms/pasemi/setup.c

331

pr_err("Machine Check on CPU %d\n", cpu);

arch/powerpc/platforms/pasemi/setup.c

332

pr_err("SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1);

arch/powerpc/platforms/pasemi/setup.c

333

pr_err("DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar);

arch/powerpc/platforms/pasemi/setup.c

334

pr_err("BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER),

arch/powerpc/platforms/pasemi/setup.c

336

pr_err("IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER),

arch/powerpc/platforms/pasemi/setup.c

338

pr_err("Cause:\n");

arch/powerpc/platforms/pasemi/setup.c

341

pr_err("Signalled by SDC\n");

arch/powerpc/platforms/pasemi/setup.c

344

pr_err("Load/Store detected error:\n");

arch/powerpc/platforms/pasemi/setup.c

346

pr_err("D-cache ECC double-bit error or bus error\n");

arch/powerpc/platforms/pasemi/setup.c

348

pr_err("LSU snoop response error\n");

arch/powerpc/platforms/pasemi/setup.c

350

pr_err("MMU SLB multi-hit or invalid B field\n");

arch/powerpc/platforms/pasemi/setup.c

354

pr_err("Recoverable Duptags\n");

arch/powerpc/platforms/pasemi/setup.c

356

pr_err("Recoverable D-cache parity error count overflow\n");

arch/powerpc/platforms/pasemi/setup.c

358

pr_err("TLB parity error count overflow\n");

arch/powerpc/platforms/pasemi/setup.c

362

pr_err("Bus Error\n");

arch/powerpc/platforms/pasemi/setup.c

365

pr_err("I-side SLB multiple hit\n");

arch/powerpc/platforms/pasemi/setup.c

370

pr_err("I-cache parity error hit\n");

arch/powerpc/platforms/pasemi/setup.c

373

pr_err("No MCE registers mapped yet, can't dump\n");

arch/powerpc/platforms/pasemi/setup.c

375

pr_err("SoC debug registers:\n");

arch/powerpc/platforms/pasemi/setup.c

378

pr_err("%s: 0x%08x\n", mce_regs[i].name,

arch/powerpc/platforms/pasemi/setup.c

385

pr_err("slb contents:\n");

arch/powerpc/platforms/pasemi/setup.c

389

pr_err("%02d %016lx %016lx\n", i, e, v);

arch/powerpc/platforms/powermac/pic.c

377

pr_err("Failed to register cascade interrupt\n");

arch/powerpc/platforms/powermac/pic.c

384

pr_err("Failed to register NMI-XMON interrupt\n");

arch/powerpc/platforms/powermac/pic.c

438

pr_err("Failed to register NMI-XMON interrupt\n");

arch/powerpc/platforms/powermac/smp.c

203

pr_err("Failed to setup secondary cpu IPI\n");

arch/powerpc/platforms/powermac/smp.c

860

pr_err("Failed to open i2c bus for time sync\n");

arch/powerpc/platforms/powernv/eeh-powernv.c

1083

pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1461

pr_err("EEH: dead IOC detected\n");

arch/powerpc/platforms/powernv/eeh-powernv.c

1474

pr_err("EEH: dead PHB#%x detected, "

arch/powerpc/platforms/powernv/eeh-powernv.c

1482

pr_err("EEH: Fenced PHB#%x detected, "

arch/powerpc/platforms/powernv/eeh-powernv.c

1526

pr_err("EEH: Frozen PE#%x "

arch/powerpc/platforms/powernv/eeh-powernv.c

1530

pr_err("EEH: PE location: %s, "

arch/powerpc/platforms/powernv/eeh-powernv.c

183

pr_err("%s: Can't register OPAL event interrupt (%d)\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

192

pr_err("%s: Can't request OPAL event interrupt (%d)\n",

arch/powerpc/platforms/powernv/idle.c

1345

pr_err("Could not allocate memory for dt parsing\n");

arch/powerpc/platforms/powernv/idle.c

208

pr_err("fastsleep_workaround_applyonce change failed while running pnv_fastsleep_workaround_apply");

arch/powerpc/platforms/powernv/memtrace.c

138

pr_err("Failed to allocate memtrace_array\n");

arch/powerpc/platforms/powernv/memtrace.c

150

pr_err("Failed to allocate trace memory on node %d\n", nid);

arch/powerpc/platforms/powernv/memtrace.c

179

pr_err("Failed to map trace memory at 0x%llx\n",

arch/powerpc/platforms/powernv/memtrace.c

239

pr_err("Failed to free trace memory on node %d\n",

arch/powerpc/platforms/powernv/memtrace.c

275

pr_err("Value must be aligned with 0x%llx\n", bytes);

arch/powerpc/platforms/powernv/ocxl.c

583

pr_err("%s - Timeout while reading XTS MMIO ATSD status register (val=%#llx, pidr=0x%lx)\n",

arch/powerpc/platforms/powernv/opal-async.c

131

pr_err("%s: Invalid token passed\n", __func__);

arch/powerpc/platforms/powernv/opal-async.c

136

pr_err("%s: Invalid message pointer passed\n", __func__);

arch/powerpc/platforms/powernv/opal-async.c

163

pr_err("%s: Invalid token passed\n", __func__);

arch/powerpc/platforms/powernv/opal-async.c

168

pr_err("%s: Invalid message pointer passed\n", __func__);

arch/powerpc/platforms/powernv/opal-async.c

254

pr_err("%s: Opal node not found\n", __func__);

arch/powerpc/platforms/powernv/opal-async.c

261

pr_err("%s: %pOF has no opal-msg-async-num\n",

arch/powerpc/platforms/powernv/opal-async.c

278

pr_err("%s: Can't register OPAL event notifier (%d)\n",

arch/powerpc/platforms/powernv/opal-async.c

88

pr_err("%s: Passed token is out of range, token %d\n",

arch/powerpc/platforms/powernv/opal-core.c

326

pr_err("Not enough memory to setup OPAL core (size: %lu)\n",

arch/powerpc/platforms/powernv/opal-core.c

480

pr_err("Failed to get OPAL metadata (%d)\n", ret);

arch/powerpc/platforms/powernv/opal-core.c

491

pr_err("Failed to get OPAL CPU metadata (%d)\n", ret);

arch/powerpc/platforms/powernv/opal-core.c

528

pr_err("OPAL memory regions not found\n");

arch/powerpc/platforms/powernv/opal-core.c

542

pr_err("CPU state data not found!\n");

arch/powerpc/platforms/powernv/opal-core.c

554

pr_err("CPU state data is invalid.\n");

arch/powerpc/platforms/powernv/opal-core.c

564

pr_err("Could not export /sys/firmware/opal/core\n");

arch/powerpc/platforms/powernv/opal-core.c

580

pr_err("'/sys/firmware/opal/core' file not accessible!\n");

arch/powerpc/platforms/powernv/opal-core.c

629

pr_err("Failed to export /sys/firmware/opal/mpipl/core\n");

arch/powerpc/platforms/powernv/opal-core.c

639

pr_err("unable to create mpipl kobject\n");

arch/powerpc/platforms/powernv/opal-core.c

646

pr_err("mpipl sysfs group creation failed (%d)", rc);

arch/powerpc/platforms/powernv/opal-core.c

657

pr_err("unable to create core symlink (%d)\n", rc);

arch/powerpc/platforms/powernv/opal-dump.c

252

pr_err("%s : Failed to allocate memory\n", __func__);

arch/powerpc/platforms/powernv/opal-dump.c

443

pr_err("%s: Can't register OPAL event irq (%d)\n",

arch/powerpc/platforms/powernv/opal-dump.c

452

pr_err("%s: Can't request OPAL event irq (%d)\n",

arch/powerpc/platforms/powernv/opal-elog.c

218

pr_err("ELOG: log read failed for log-id=%llx\n",

arch/powerpc/platforms/powernv/opal-elog.c

275

pr_err("ELOG: OPAL log info read failed\n");

arch/powerpc/platforms/powernv/opal-elog.c

322

pr_err("%s: Can't register OPAL event irq (%d)\n",

arch/powerpc/platforms/powernv/opal-elog.c

330

pr_err("%s: Can't request OPAL event irq (%d)\n",

arch/powerpc/platforms/powernv/opal-fadump.c

250

pr_err("Failed to set kernel metadata tag!\n");

arch/powerpc/platforms/powernv/opal-fadump.c

261

pr_err("Failed to set boot memory tag!\n");

arch/powerpc/platforms/powernv/opal-fadump.c

307

pr_err("Failed to register. Parameter Error(%lld).\n", rc);

arch/powerpc/platforms/powernv/opal-fadump.c

310

pr_err("Support not available.\n");

arch/powerpc/platforms/powernv/opal-fadump.c

315

pr_err("Failed to register. Unknown Error(%lld).\n", rc);

arch/powerpc/platforms/powernv/opal-fadump.c

335

pr_err("Failed to un-register - unexpected Error(%lld).\n", rc);

arch/powerpc/platforms/powernv/opal-fadump.c

350

pr_err("Failed to invalidate - unexpected Error(%lld).\n", rc);

arch/powerpc/platforms/powernv/opal-fadump.c

397

pr_err("CPU state data is invalid. Ignoring!\n");

arch/powerpc/platforms/powernv/opal-fadump.c

643

pr_err("Support missing for this f/w version!\n");

arch/powerpc/platforms/powernv/opal-fadump.c

660

pr_err("F/W load area: 0x%llx-0x%llx\n",

arch/powerpc/platforms/powernv/opal-fadump.c

662

pr_err("F/W version not supported!\n");

arch/powerpc/platforms/powernv/opal-fadump.c

68

pr_err("Failed to get boot memory tag (%lld)\n", ret);

arch/powerpc/platforms/powernv/opal-fadump.c

688

pr_err("Failed to get Kernel metadata (%lld)\n", ret);

arch/powerpc/platforms/powernv/opal-flash.c

411

pr_err("%s : Failed to allocate memory\n", __func__);

arch/powerpc/platforms/powernv/opal-flash.c

530

pr_err("%s : Failed to allocate memory\n", __func__);

arch/powerpc/platforms/powernv/opal-hmi.c

221

pr_err("HMI Interrupt, Unknown event version %d !\n",

arch/powerpc/platforms/powernv/opal-hmi.c

347

pr_err("HMI: out of memory, Opal message event not handled\n");

arch/powerpc/platforms/powernv/opal-hmi.c

374

pr_err("%s: Can't register OPAL event notifier (%d)\n",

arch/powerpc/platforms/powernv/opal-imc.c

167

pr_err("IMC PMU %s Register failed\n", pmu_ptr->pmu.name);

arch/powerpc/platforms/powernv/opal-imc.c

211

pr_err("%s: Failed to stop Core (cpu = %d)\n",

arch/powerpc/platforms/powernv/opal-kmsg.c

46

pr_err("opal: kmsg_dump_register failed; returned %d\n", rc);

arch/powerpc/platforms/powernv/opal-memory-errors.c

126

pr_err("%s: Can't register OPAL event notifier (%d)\n",

arch/powerpc/platforms/powernv/opal-memory-errors.c

98

pr_err("MEMORY_ERROR: out of memory, Opal message event not"

arch/powerpc/platforms/powernv/opal-msglog.c

77

pr_err("OPAL: memory console corruption. Aborting read.\n");

arch/powerpc/platforms/powernv/opal-power.c

106

pr_err("Unknown power-control type %llu\n", type);

arch/powerpc/platforms/powernv/opal-power.c

110

pr_err("Unknown OPAL message type %lu\n", msg_type);

arch/powerpc/platforms/powernv/opal-power.c

146

pr_err("Failed to register SHUTDOWN notifier, ret = %d\n", ret);

arch/powerpc/platforms/powernv/opal-power.c

162

pr_err("Failed to register EPOW notifier, ret = %d\n", ret);

arch/powerpc/platforms/powernv/opal-power.c

167

pr_err("Failed to register DPO notifier, ret = %d\n", ret);

arch/powerpc/platforms/powernv/opal-power.c

36

pr_err("Failed to get EPOW event information\n");

arch/powerpc/platforms/powernv/opal-prd.c

404

pr_err("Couldn't register event notifier\n");

arch/powerpc/platforms/powernv/opal-prd.c

410

pr_err("Couldn't register PRD2 event notifier\n");

arch/powerpc/platforms/powernv/opal-prd.c

417

pr_err("failed to register miscdev\n");

arch/powerpc/platforms/powernv/opal-secvar.c

159

pr_err("OPAL doesn't support secure variables\n");

arch/powerpc/platforms/powernv/opal-sensor.c

124

pr_err("Opal node 'sensors' not found\n");

arch/powerpc/platforms/powernv/opal-sensor.c

35

pr_err("%s: Failed to wait for the async response, %d\n",

arch/powerpc/platforms/powernv/opal-sensor.c

88

pr_err("%s: Failed to wait for the async response, %d\n",

arch/powerpc/platforms/powernv/opal-sysparam.c

162

pr_err("SYSPARAM: Opal sysparam node not compatible\n");

arch/powerpc/platforms/powernv/opal-sysparam.c

168

pr_err("SYSPARAM: Failed to create sysparam kobject\n");

arch/powerpc/platforms/powernv/opal-sysparam.c

175

pr_err("SYSPARAM: Failed to allocate memory for param data "

arch/powerpc/platforms/powernv/opal-sysparam.c

183

pr_err("SYSPARAM: No string found of property param-name in "

arch/powerpc/platforms/powernv/opal-sysparam.c

190

pr_err("SYSPARAM: Failed to allocate memory to read parameter "

arch/powerpc/platforms/powernv/opal-sysparam.c

197

pr_err("SYSPARAM: Failed to allocate memory to read parameter "

arch/powerpc/platforms/powernv/opal-sysparam.c

204

pr_err("SYSPARAM: Failed to allocate memory to read supported "

arch/powerpc/platforms/powernv/opal-sysparam.c

210

pr_err("SYSPARAM: Missing property param-id in the DT\n");

arch/powerpc/platforms/powernv/opal-sysparam.c

215

pr_err("SYSPARAM: Missing property param-len in the DT\n");

arch/powerpc/platforms/powernv/opal-sysparam.c

221

pr_err("SYSPARAM: Missing property param-perm in the DT\n");

arch/powerpc/platforms/powernv/opal-sysparam.c

227

pr_err("SYSPARAM: Failed to allocate memory for parameter "

arch/powerpc/platforms/powernv/opal-sysparam.c

266

pr_err("SYSPARAM: Failed to create sysfs file %s\n",

arch/powerpc/platforms/powernv/opal-sysparam.c

38

pr_err("%s: Couldn't get the token, returning\n",

arch/powerpc/platforms/powernv/opal-sysparam.c

52

pr_err("%s: Failed to wait for the async response, %zd\n",

arch/powerpc/platforms/powernv/opal-sysparam.c

73

pr_err("%s: Couldn't get the token, returning\n",

arch/powerpc/platforms/powernv/opal-sysparam.c

88

pr_err("%s: Failed to wait for the async response, %d\n",

arch/powerpc/platforms/powernv/opal.c

1174

pr_err("%s : Failed to allocate memory\n", __func__);

arch/powerpc/platforms/powernv/opal.c

1210

pr_err("%s: unexpected OPAL error %d\n", __func__, rc);

arch/powerpc/platforms/powernv/opal.c

408

pr_err("%s: Can't register OPAL event irq (%d)\n",

arch/powerpc/platforms/powernv/opal.c

416

pr_err("%s: Can't request OPAL event irq (%d)\n",

arch/powerpc/platforms/powernv/opal.c

592

pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n");

arch/powerpc/platforms/powernv/opal.c

599

pr_err("Machine check interrupt is fatal\n");

arch/powerpc/platforms/powernv/opal.c

682

pr_err("Machine Check Exception, Unknown event version %d !\n",

arch/powerpc/platforms/powernv/opal.c

857

pr_err("Unable to create export dir for %pOF\n", child);

arch/powerpc/platforms/powernv/pci-ioda-tce.c

70

pr_err("Failed to allocate a TCE memory, level shift=%d\n",

arch/powerpc/platforms/powernv/pci-ioda.c

1880

pr_err("PCI: failed to create MSI IRQ domain bridge %pOF (domain %d)\n",

arch/powerpc/platforms/powernv/pci-ioda.c

1903

pr_err("PCI %d: Failed to allocate MSI bitmap !\n",

arch/powerpc/platforms/powernv/pci-ioda.c

1937

pr_err("%s: Error %lld mapping IO segment#%d to PE#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

1961

pr_err("%s: Error %lld mapping M32 segment#%d to PE#%x",

arch/powerpc/platforms/powernv/pci-ioda.c

2519

pr_err(" Missing \"ibm,opal-phbid\" property !\n");

arch/powerpc/platforms/powernv/pci-ioda.c

2533

pr_err(" Can't allocate PCI controller for %pOF\n",

arch/powerpc/platforms/powernv/pci-ioda.c

2583

pr_err(" Failed to map registers !\n");

arch/powerpc/platforms/powernv/pci-ioda.c

879

pr_err("%s: Device tree node not associated properly\n",

arch/powerpc/platforms/powernv/pci-sriov.c

333

pr_err("Failed to map M64 window #%d: %lld\n", window_id, rc);

arch/powerpc/platforms/powernv/pci-sriov.c

393

pr_err("Error mapping single PE BAR\n");

arch/powerpc/platforms/powernv/setup.c

336

pr_err("Unsupported '%s' reboot.\n", cmd);

arch/powerpc/platforms/powernv/setup.c

338

pr_err("Unable to issue '%s' reboot. Err=%ld\n",

arch/powerpc/platforms/powernv/setup.c

346

pr_err("Unable to reboot. Err=%ld\n", rc);

arch/powerpc/platforms/powernv/subcore.c

344

pr_err("Unable to change split core mode while KVM active.\n");

arch/powerpc/platforms/powernv/vas-fault.c

145

pr_err("VAS[%d] fault_fifo %p, fifo %p, pswid 0x%x, fault_crbs %d bad CRB?\n",

arch/powerpc/platforms/powernv/vas-fault.c

207

pr_err("Unable to alloc %d bytes for fault_fifo\n",

arch/powerpc/platforms/powernv/vas-fault.c

233

pr_err("VAS: Error %ld opening FaultWin\n", PTR_ERR(win));

arch/powerpc/platforms/powernv/vas-fault.c

35

pr_err("Fault fifo size %d, Max crbs %d\n", vinst->fault_fifo_size,

arch/powerpc/platforms/powernv/vas-fault.c

39

pr_err("Fault FIFO Dump:\n");

arch/powerpc/platforms/powernv/vas-fault.c

41

pr_err("[%.3d, %p]: 0x%.16lx 0x%.16lx 0x%.16lx 0x%.16lx\n",

arch/powerpc/platforms/powernv/vas-window.c

1389

pr_err("PSWID decode: Could not find window for winid %d pswid %d vinst 0x%p\n",

arch/powerpc/platforms/powernv/vas-window.c

1403

pr_err("PSWID decode: id %d, tx %d, user %d, nx %d, cop %d\n",

arch/powerpc/platforms/powernv/vas-window.c

516

pr_err("Too many (%d) open windows\n", VAS_WINDOWS_PER_CHIP);

arch/powerpc/platforms/powernv/vas.c

104

pr_err("Bad 'paste_win_id_shift' in DT, %llx\n", res->end);

arch/powerpc/platforms/powernv/vas.c

112

pr_err("Inst%d: Unable to allocate global irq for chip %d\n",

arch/powerpc/platforms/powernv/vas.c

119

pr_err("Inst%d: Unable to map global irq %d\n",

arch/powerpc/platforms/powernv/vas.c

126

pr_err("Inst%d: Invalid virq %d\n",

arch/powerpc/platforms/powernv/vas.c

37

pr_err("VAS[%d]: Request IRQ(%d) failed with %d\n",

arch/powerpc/platforms/powernv/vas.c

61

pr_err("No ibm,vas-id property for %s?\n", pdev->name);

arch/powerpc/platforms/powernv/vas.c

67

pr_err("No ibm,chip-id property for %s?\n", pdev->name);

arch/powerpc/platforms/powernv/vas.c

72

pr_err("Unexpected DT configuration for [%s, %d]\n",

arch/powerpc/platforms/ps3/device-init.c

708

pr_err("%s:%u: tag mismatch, got %llx, expected %llx\n",

arch/powerpc/platforms/ps3/device-init.c

712

pr_err("%s:%u: res %d status 0x%llx\n", __func__, __LINE__, res,

arch/powerpc/platforms/ps3/device-init.c

740

pr_err("%s:%u: %s failed %d\n", __func__, __LINE__, op, res);

arch/powerpc/platforms/ps3/device-init.c

751

pr_err("%s:%u: %s not completed, status 0x%llx\n", __func__,

arch/powerpc/platforms/ps3/device-init.c

801

pr_err("%s:%u: lv1_open_device failed %s\n", __func__,

arch/powerpc/platforms/ps3/device-init.c

809

pr_err("%s:%u: ps3_sb_event_receive_port_setup failed %d\n",

arch/powerpc/platforms/ps3/device-init.c

820

pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__,

arch/powerpc/platforms/pseries/cmm.c

161

pr_err("%s: Can not set page to loaned. rc=%ld\n", __func__, rc);

arch/powerpc/platforms/pseries/dlpar.c

356

pr_err("%s: %pOF: of_property_read_u32 %s: %d\n",

arch/powerpc/platforms/pseries/dlpar.c

458

pr_err("%s: Adding device node for index (%d), but "

arch/powerpc/platforms/pseries/dlpar.c

537

pr_err("%s: %pOF: of_property_read_u32 %s: %d\n",

arch/powerpc/platforms/pseries/dlpar.c

579

pr_err("Invalid action (%d) specified\n", phpe->action);

arch/powerpc/platforms/pseries/dlpar.c

661

pr_err("Invalid resource specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

681

pr_err("Invalid action specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

701

pr_err("No DRC count specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

706

pr_err("Invalid DRC count specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

712

pr_err("No DRC Index specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

717

pr_err("Invalid DRC Index specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

727

pr_err("No DRC Index specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

732

pr_err("Invalid DRC Index specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

741

pr_err("No DRC count specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

746

pr_err("Invalid DRC count specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

752

pr_err("Invalid id_type specified.\n");

arch/powerpc/platforms/pseries/dlpar.c

793

pr_err("Could not handle DLPAR request \"%s\"\n", buf);

arch/powerpc/platforms/pseries/eeh_pseries.c

530

pr_err("%s: Invalid option %d\n", __func__, option);

arch/powerpc/platforms/pseries/hotplug-cpu.c

253

pr_err("Cannot add cpu %pOF; this system configuration"

arch/powerpc/platforms/pseries/hotplug-cpu.c

789

pr_err("Invalid action (%d) specified\n", hp_elog->action);

arch/powerpc/platforms/pseries/hotplug-memory.c

157

pr_err("Could not find LMB associativity\n");

arch/powerpc/platforms/pseries/hotplug-memory.c

212

pr_err("Failed memory block lookup for LMB 0x%x\n", lmb->drc_index);

arch/powerpc/platforms/pseries/hotplug-memory.c

381

pr_err("Memory hot-remove failed, adding LMB's back\n");

arch/powerpc/platforms/pseries/hotplug-memory.c

389

pr_err("Failed to add LMB back, drc index %x\n",

arch/powerpc/platforms/pseries/hotplug-memory.c

481

pr_err("Memory at %llx (drc index %x) is reserved\n",

arch/powerpc/platforms/pseries/hotplug-memory.c

503

pr_err("Memory indexed-count-remove failed, adding any removed LMBs\n");

arch/powerpc/platforms/pseries/hotplug-memory.c

519

pr_err("Failed to add LMB, drc index %x\n",

arch/powerpc/platforms/pseries/hotplug-memory.c

581

pr_err("Failed to configure LMB 0x%x\n", lmb->drc_index);

arch/powerpc/platforms/pseries/hotplug-memory.c

595

pr_err("Failed to add LMB 0x%x to node %u", lmb->drc_index, nid);

arch/powerpc/platforms/pseries/hotplug-memory.c

602

pr_err("Failed to online LMB 0x%x on node %u\n", lmb->drc_index, nid);

arch/powerpc/platforms/pseries/hotplug-memory.c

663

pr_err("Memory hot-add failed, removing any added LMBs\n");

arch/powerpc/platforms/pseries/hotplug-memory.c

671

pr_err("Failed to remove LMB, drc index %x\n",

arch/powerpc/platforms/pseries/hotplug-memory.c

755

pr_err("Memory at %llx (drc index %x) is reserved\n",

arch/powerpc/platforms/pseries/hotplug-memory.c

779

pr_err("Memory indexed-count-add failed, removing any added LMBs\n");

arch/powerpc/platforms/pseries/hotplug-memory.c

787

pr_err("Failed to remove LMB, drc index %x\n",

arch/powerpc/platforms/pseries/hotplug-memory.c

860

pr_err("Invalid action (%d) specified\n", hp_elog->action);

arch/powerpc/platforms/pseries/htmdump.c

414

pr_err("Failed to allocate htmdump buf\n");

arch/powerpc/platforms/pseries/htmdump.c

442

pr_err("Failed to allocate htmstatus buf\n");

arch/powerpc/platforms/pseries/htmdump.c

449

pr_err("Failed to allocate htm info buf\n");

arch/powerpc/platforms/pseries/htmdump.c

456

pr_err("Failed to allocate htm caps buf\n");

arch/powerpc/platforms/pseries/iommu.c

1014

pr_err("Unable to add DMA window property for %pOF", pdn);

arch/powerpc/platforms/pseries/iommu.c

2162

pr_err("%s: Calling query %pOF\n", __func__, pdn);

arch/powerpc/platforms/pseries/iommu.c

2178

pr_err("%s: Create ddw failed %pOF\n", __func__, pdn);

arch/powerpc/platforms/pseries/iommu.c

2301

pr_err("%s: The existing DDW removal failed for node %pOF\n", __func__, pdn);

arch/powerpc/platforms/pseries/kexec.c

36

pr_err("WARNING: DTL deregistration for cpu "

arch/powerpc/platforms/pseries/kexec.c

44

pr_err("WARNING: SLB shadow buffer deregistration "

arch/powerpc/platforms/pseries/kexec.c

51

pr_err("WARNING: VPA deregistration for cpu %d "

arch/powerpc/platforms/pseries/lpar.c

1102

pr_err("Too many PTEs (%lu) for H_BLOCK_REMOVE", idx);

arch/powerpc/platforms/pseries/lpar.c

136

pr_err("WARNING: DTL registration of cpu %d (hw %d) failed with %ld\n",

arch/powerpc/platforms/pseries/lpar.c

216

pr_err("error allocating memory for associativity information\n");

arch/powerpc/platforms/pseries/lpar.c

480

pr_err("vcpudispatch_stats: unable to setup workqueue for DTL processing\n");

arch/powerpc/platforms/pseries/lpar.c

518

pr_err("vcpudispatch_stats: please use 0 to disable or 1 to enable dispatch statistics\n");

arch/powerpc/platforms/pseries/lpar.c

615

pr_err("vcpudispatch_stats_freq: please specify a frequency between 1 and %d\n",

arch/powerpc/platforms/pseries/lpar.c

651

pr_err("vcpudispatch_stats: error creating procfs file\n");

arch/powerpc/platforms/pseries/lpar.c

654

pr_err("vcpudispatch_stats_freq: error creating procfs file\n");

arch/powerpc/platforms/pseries/lpar.c

699

pr_err("WARNING: VPA registration for cpu %d (hw %d) of area "

arch/powerpc/platforms/pseries/lpar.c

713

pr_err("WARNING: SLB shadow buffer registration for "

arch/powerpc/platforms/pseries/lpar.c

749

pr_err("Failed to register process table (rc=%ld)\n", rc);

arch/powerpc/platforms/pseries/lpar.c

801

pr_err("Failed hash pte insert with error %ld\n", lpar_rc);

arch/powerpc/platforms/pseries/mobility.c

246

pr_err("updating %s property failed: %d\n",

arch/powerpc/platforms/pseries/mobility.c

381

pr_err("device tree update failed: %d\n", rc);

arch/powerpc/platforms/pseries/mobility.c

416

pr_err("unexpected H_VASI_STATE result %ld\n", hvrc);

arch/powerpc/platforms/pseries/mobility.c

440

pr_err("unexpected H_VASI_STATE result %lu\n", state);

arch/powerpc/platforms/pseries/mobility.c

480

pr_err("H_VASI_STATE return error (%d)\n", ret);

arch/powerpc/platforms/pseries/mobility.c

485

pr_err("unexpected H_VASI_STATE result %lu\n", state);

arch/powerpc/platforms/pseries/mobility.c

550

pr_err("ibm,suspend-me error: %d\n", status);

arch/powerpc/platforms/pseries/mobility.c

667

pr_err("H_VASI_SIGNAL error: %ld\n", hvrc);

arch/powerpc/platforms/pseries/mobility.c

716

pr_err("VASI state poll error: %d", vasi_err);

arch/powerpc/platforms/pseries/mobility.c

824

pr_err("unable to create migration sysfs file (%d)\n", rc);

arch/powerpc/platforms/pseries/mobility.c

828

pr_err("unable to create api_version sysfs file (%d)\n", rc);

arch/powerpc/platforms/pseries/msi.c

288

pr_err("rtas_msi: couldn't find PE for %s\n", pci_name(dev));

arch/powerpc/platforms/pseries/msi.c

300

pr_err("rtas_msi: found 0 devices under PE for %s\n",

arch/powerpc/platforms/pseries/msi.c

649

pr_err("PCI: failed to create MSI IRQ domain bridge %pOF (domain %d)\n",

arch/powerpc/platforms/pseries/msi.c

662

pr_err("PCI: failed to find MSIs for bridge %pOF (domain %d)\n",

arch/powerpc/platforms/pseries/papr-hvpipe.c

189

pr_err("Could not allocate RTAS buffer for recv pipe\n");

arch/powerpc/platforms/pseries/papr-hvpipe.c

205

pr_err("Received the payload size = %d, but the buffer size = %d\n",

arch/powerpc/platforms/pseries/papr-hvpipe.c

216

pr_err("ibm,receive-hvpipe-msg failed with %d\n",

arch/powerpc/platforms/pseries/papr-hvpipe.c

492

pr_err("pid(%d) is already using the source(%d)\n",

arch/powerpc/platforms/pseries/papr-hvpipe.c

676

pr_err("Can not enable hvpipe %d\n", ret);

arch/powerpc/platforms/pseries/papr-hvpipe.c

698

pr_err("Can not enable hvpipe event IRQ\n");

arch/powerpc/platforms/pseries/papr-hvpipe.c

737

pr_err("hvpipe is not enabled after migration\n");

arch/powerpc/platforms/pseries/papr-hvpipe.c

790

pr_err("hvpipe feature is not enabled %d\n", ret);

arch/powerpc/platforms/pseries/papr-indices.c

361

pr_err("unexpected ibm,set-dynamic-indicator result %d\n",

arch/powerpc/platforms/pseries/papr-indices.c

422

pr_err("unexpected ibm,get-dynamic-sensor result %d\n",

arch/powerpc/platforms/pseries/papr-platform-dump.c

252

pr_err("No valid FD to invalidate dump for the ID(%llu)\n",

arch/powerpc/platforms/pseries/papr-platform-dump.c

261

pr_err("Invalid dump ID(%llu) to invalidate dump\n",

arch/powerpc/platforms/pseries/papr-platform-dump.c

267

pr_err("Platform dump is not complete, but requested "

arch/powerpc/platforms/pseries/papr-platform-dump.c

318

pr_err("Platform dump for ID(%llu) is already in progress\n",

arch/powerpc/platforms/pseries/papr-sysparm.c

140

pr_err("unexpected ibm,get-system-parameter result %d\n", fwrc);

arch/powerpc/platforms/pseries/papr-sysparm.c

193

pr_err("unexpected ibm,set-system-parameter result %d\n", fwrc);

arch/powerpc/platforms/pseries/papr_scm.c

1304

pr_err("Bad block registration for 0x%llx failed\n", phys_addr);

arch/powerpc/platforms/pseries/pci_dlpar.c

33

pr_err("PCI: Failed to register node %d\n", nid);

arch/powerpc/platforms/pseries/plpks-secvar.c

87

pr_err("Failed to read variable '%s': %d\n", key, rc);

arch/powerpc/platforms/pseries/plpks-sysfs.c

74

pr_err("Failed to create plpks kobj\n");

arch/powerpc/platforms/pseries/plpks-sysfs.c

80

pr_err("Failed to create plpks config kobj\n");

arch/powerpc/platforms/pseries/plpks-sysfs.c

87

pr_err("Failed to create attribute group for plpks config\n");

arch/powerpc/platforms/pseries/plpks.c

1054

pr_err("Cannot set both audit/enforce and enforce bits.");

arch/powerpc/platforms/pseries/plpks.c

1068

pr_err("Output buffer allocation failed. Returning -ENOMEM.");

arch/powerpc/platforms/pseries/plpks.c

1087

pr_err("H_PKS_WRAP_OBJECT failed. pseries_status=%d, rc=%d",

arch/powerpc/platforms/pseries/plpks.c

1155

pr_err("Output buffer allocation failed. Returning -ENOMEM.");

arch/powerpc/platforms/pseries/plpks.c

1173

pr_err("H_PKS_UNWRAP_OBJECT failed. pseries_status=%d, rc=%d",

arch/powerpc/platforms/pseries/plpks.c

1305

pr_err("Can't find chosen node: %s\n",

arch/powerpc/platforms/pseries/plpks.c

1344

pr_err("Error allocating memory for password.\n");

arch/powerpc/platforms/pseries/plpks.c

1367

pr_err("POWER LPAR Platform KeyStore is not supported or enabled\n");

arch/powerpc/platforms/pseries/plpks.c

1373

pr_err("Failed setting POWER LPAR Platform KeyStore Password\n");

arch/powerpc/platforms/pseries/plpks.c

318

pr_err("Invalid Max Password Size received from hypervisor (%d < 32)\n", maxpwsize);

arch/powerpc/platforms/pseries/plpks.c

324

pr_err("Invalid Max Object Label Size received from hypervisor (%d < 255)\n",

arch/powerpc/platforms/pseries/plpks.c

331

pr_err("Invalid Total Size received from hypervisor (%d < 4096)\n", totalsize);

arch/powerpc/platforms/pseries/plpks.c

337

pr_err("Invalid Max Object Size (0x%x != 0xFFFF)\n", maxobjsize);

arch/powerpc/platforms/pseries/plpks.c

450

pr_err("Couldn't get config, rc: %d\n", rc);

arch/powerpc/platforms/pseries/plpks.c

965

pr_err("H_PKS_GEN_KEY failed. pseries_status=%d, rc=%d",

arch/powerpc/platforms/pseries/plpks_sed_ops.c

51

pr_err("SED: plpks not available\n");

arch/powerpc/platforms/pseries/pmem.c

114

pr_err("Hotplug event for a pmem device, but none exists\n");

arch/powerpc/platforms/pseries/pmem.c

119

pr_err("Unsupported hotplug event type %d\n",

arch/powerpc/platforms/pseries/pmem.c

133

pr_err("Unsupported hotplug action (%d)\n", hp_elog->action);

arch/powerpc/platforms/pseries/pmem.c

38

pr_err("Failed to acquire DRC, rc: %d, drc index: %x\n",

arch/powerpc/platforms/pseries/pmem.c

45

pr_err("configure-connector failed for drc %x\n", drc_index);

arch/powerpc/platforms/pseries/pmem.c

53

pr_err("Failed to attach node %pOF, rc: %d, drc index: %x\n",

arch/powerpc/platforms/pseries/pmem.c

81

pr_err("Attempting to remove unused DRC index %x\n", drc_index);

arch/powerpc/platforms/pseries/pmem.c

94

pr_err("Failed to release drc (%x) for CPU %pOFn, rc: %d\n",

arch/powerpc/platforms/pseries/ras.c

210

pr_err("Unknown power/cooling shutdown event (modifier = %d)\n",

arch/powerpc/platforms/pseries/ras.c

283

pr_err("Unknown power/cooling event (action code = %d)\n",

arch/powerpc/platforms/pseries/ras.c

390

pr_err("Recoverable hardware error detected\n");

arch/powerpc/platforms/pseries/ras.c

557

pr_err("MCE: limited recovery, system may be degraded\n");

arch/powerpc/platforms/pseries/ras.c

788

pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n");

arch/powerpc/platforms/pseries/ras.c

795

pr_err("Machine check interrupt is fatal\n");

arch/powerpc/platforms/pseries/ras.c

849

pr_err("Machine Check Exception, Unknown event version %d !\n",

arch/powerpc/platforms/pseries/rtas-fadump.c

213

pr_err("Failed to register. Hardware Error(%d).\n", rc);

arch/powerpc/platforms/pseries/rtas-fadump.c

217

pr_err("Can't have holes in reserved memory area.\n");

arch/powerpc/platforms/pseries/rtas-fadump.c

219

pr_err("Failed to register. Parameter Error(%d).\n", rc);

arch/powerpc/platforms/pseries/rtas-fadump.c

223

pr_err("Already registered!\n");

arch/powerpc/platforms/pseries/rtas-fadump.c

228

pr_err("Failed to register. Unknown Error(%d).\n", rc);

arch/powerpc/platforms/pseries/rtas-fadump.c

252

pr_err("Failed to un-register - unexpected error(%d).\n", rc);

arch/powerpc/platforms/pseries/rtas-fadump.c

277

pr_err("Failed to invalidate - unexpected error (%d).\n", rc);

arch/powerpc/platforms/pseries/rtas-fadump.c

376

pr_err("Unable to read register save area.\n");

arch/powerpc/platforms/pseries/rtas-fadump.c

402

pr_err("Unable to read CPU state data\n");

arch/powerpc/platforms/pseries/rtas-fadump.c

455

pr_err("Dump taken by platform is not valid (%d)\n", i);

arch/powerpc/platforms/pseries/rtas-fadump.c

459

pr_err("Dump taken by platform is incomplete (%d)\n", i);

arch/powerpc/platforms/pseries/suspend.c

39

pr_err("pseries_suspend_begin: vasi_state returned %ld\n",rc);

arch/powerpc/platforms/pseries/suspend.c

44

pr_err("pseries_suspend_begin: vasi_state returned state %ld\n",

arch/powerpc/platforms/pseries/vas-sysfs.c

216

pr_err("VAS: sysfs kobject add / event failed %d\n",

arch/powerpc/platforms/pseries/vas-sysfs.c

239

pr_err("%s: register vas misc device failed\n", __func__);

arch/powerpc/platforms/pseries/vas-sysfs.c

252

pr_err("Failed to create VAS sysfs entry\n");

arch/powerpc/platforms/pseries/vas-sysfs.c

261

pr_err("Failed to create VAS GZIP capability entry\n");

arch/powerpc/platforms/pseries/vas.c

1011

pr_err("Target credits mismatch with the hypervisor\n");

arch/powerpc/platforms/pseries/vas.c

1012

pr_err("state(%d): lpar creds: %d HV lpar creds: %d\n",

arch/powerpc/platforms/pseries/vas.c

1014

pr_err("Used creds: %d, Active creds: %d\n",

arch/powerpc/platforms/pseries/vas.c

1019

pr_err("state(%d): Get VAS capabilities failed with %d\n",

arch/powerpc/platforms/pseries/vas.c

1058

pr_err("Invalid migration action %d\n", action);

arch/powerpc/platforms/pseries/vas.c

1086

pr_err("API is supported only with radix page tables\n");

arch/powerpc/platforms/pseries/vas.c

121

pr_err("H_DEALLOCATE_VAS_WINDOW error: %ld, winid: %llu\n",

arch/powerpc/platforms/pseries/vas.c

150

pr_err("H_MODIFY_VAS_WINDOW error: %ld, winid %u pid %u\n",

arch/powerpc/platforms/pseries/vas.c

179

pr_err("%s error %ld, query_type %u, result buffer 0x%llx\n",

arch/powerpc/platforms/pseries/vas.c

202

pr_err("H_GET_NX_FAULT error: %ld, winid %u, buffer 0x%llx\n",

arch/powerpc/platforms/pseries/vas.c

277

pr_err("Failed irq mapping %d\n", txwin->fault_irq);

arch/powerpc/platforms/pseries/vas.c

294

pr_err("VAS-Window[%d]: Request IRQ(%u) failed with %d\n",

arch/powerpc/platforms/pseries/vas.c

385

pr_err("H_HOME_NODE_ASSOCIATIVITY error: %d\n", rc);

arch/powerpc/platforms/pseries/vas.c

524

pr_err("Window (%u): Invalid window type %u\n",

arch/powerpc/platforms/pseries/vas.c

610

pr_err("User space COPY/PASTE is not supported\n");

arch/powerpc/platforms/pseries/vas.c

617

pr_err("Unsupported window type %u\n", caps->win_type);

arch/powerpc/platforms/pseries/vas.c

628

pr_err("Window creds(%u) > max allowed window creds(%u)\n",

arch/powerpc/platforms/pseries/vas.c

859

pr_err("Invalid credit type %d\n", type);

arch/powerpc/platforms/pseries/vas.c

89

pr_err("H_ALLOCATE_VAS_WINDOW: COPY/PASTE is not supported\n");

arch/powerpc/platforms/pseries/vas.c

922

pr_err("Failed reconfig VAS capabilities with DLPAR\n");

arch/powerpc/platforms/pseries/vas.c

99

pr_err("H_ALLOCATE_VAS_WINDOW error: %ld, wintype: %u, credits: %u\n",

arch/powerpc/sysdev/cpm2_pic.c

184

pr_err("CPM2 PIC: sense type 0x%x not supported\n", flow_type);

arch/powerpc/sysdev/ehv_pic.c

262

pr_err("ehv_pic_init: could not find epapr,hv-pic node\n");

arch/powerpc/sysdev/ehv_pic.c

285

pr_err("ehv_pic_init: of_iomap failed\n");

arch/powerpc/sysdev/fsl_gtm.c

387

pr_err("%pOF: unable to allocate memory\n",

arch/powerpc/sysdev/fsl_gtm.c

396

pr_err("%pOF: no clock-frequency\n", np);

arch/powerpc/sysdev/fsl_gtm.c

406

pr_err("%pOF: not enough interrupts specified\n",

arch/powerpc/sysdev/fsl_gtm.c

416

pr_err("%pOF: unable to iomap registers\n",

arch/powerpc/sysdev/fsl_mpic_err.c

131

pr_err("Error interrupt setup failed\n");

arch/powerpc/sysdev/fsl_mpic_err.c

141

pr_err("Failed to register error interrupt handler\n");

arch/powerpc/sysdev/fsl_mpic_err.c

67

pr_err("could not map mpic error registers\n");

arch/powerpc/sysdev/fsl_msi.c

297

pr_err("fsl-msi: fh_vmpic_get_msir() failed for "

arch/powerpc/sysdev/fsl_pci.c

264

pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);

arch/powerpc/sysdev/fsl_pci.c

273

pr_err("Ran out of outbound PCI ATMUs for IO resource\n");

arch/powerpc/sysdev/fsl_pci.c

295

pr_err("%pOF: No outbound window space\n", hose->dn);

arch/powerpc/sysdev/fsl_pci.c

300

pr_err("%pOF: No space for inbound window\n", hose->dn);

arch/powerpc/sysdev/fsl_pci.c

448

pr_err("%pOF: ERROR: Memory size exceeds PCI ATMU ability to "

arch/powerpc/sysdev/fsl_rcpm.c

231

pr_err("timeout waiting for SLP bit to be cleared\n");

arch/powerpc/sysdev/fsl_rcpm.c

262

pr_err("timeout waiting for LPM20 bit to be cleared\n");

arch/powerpc/sysdev/fsl_rcpm.c

369

pr_err("of_iomap() error.\n");

arch/powerpc/sysdev/fsl_rio.c

531

pr_err("%pOF: unable to find 'reg' property\n",

arch/powerpc/sysdev/fsl_rio.c

556

pr_err("%pOF: unable to find 'reg' property\n",

arch/powerpc/sysdev/fsl_rmu.c

1087

pr_err("%pOF: unable to find 'reg' property of message-unit\n",

arch/powerpc/sysdev/fsl_rmu.c

556

pr_err("RIO: unable allocate port write queue\n");

arch/powerpc/sysdev/fsl_rmu.c

585

pr_err("MPC85xx RIO: unable to request inbound doorbell irq");

arch/powerpc/sysdev/fsl_rmu.c

594

pr_err("FIFO allocation failed\n");

arch/powerpc/sysdev/mpic.c

2014

pr_err("mpic: Failed to register subsystem!\n");

arch/powerpc/sysdev/mpic_timer.c

429

pr_err("%pOF: malformed available-ranges property.\n", np);

arch/powerpc/sysdev/mpic_timer.c

446

pr_err("%pOF: irq parse and map failed.\n", np);

arch/powerpc/sysdev/mpic_timer.c

469

pr_err("%pOF: cannot allocate memory for group.\n", np);

arch/powerpc/sysdev/mpic_timer.c

478

pr_err("%pOF: cannot ioremap timer register address.\n", np);

arch/powerpc/sysdev/mpic_timer.c

485

pr_err("%pOF: cannot ioremap tcr address.\n", np);

arch/powerpc/sysdev/mpic_timer.c

492

pr_err("%pOF: cannot get timer frequency.\n", np);

arch/powerpc/sysdev/mpic_timer.c

498

pr_err("%pOF: cannot get timer irqs.\n", np);

arch/powerpc/sysdev/xics/icp-hv.c

31

pr_err("%s: bad return code xirr cppr=0x%x returned %ld\n",

arch/powerpc/sysdev/xics/icp-hv.c

43

pr_err("%s: bad return code cppr cppr=0x%x returned %ld\n",

arch/powerpc/sysdev/xics/icp-hv.c

53

pr_err("%s: bad return code eoi xirr=0x%x returned %ld\n",

arch/powerpc/sysdev/xics/icp-hv.c

69

pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "

arch/powerpc/sysdev/xics/icp-native.c

165

pr_err("XICS: hw interrupt 0x%x to offline cpu, disabling\n",

arch/powerpc/sysdev/xics/icp-native.c

266

pr_err("icp_native: ICP reg len (%d) != num servers (%d)",

arch/powerpc/sysdev/xics/icp-native.c

277

pr_err("icp_native: Could not translate ICP MMIO"

arch/powerpc/sysdev/xics/icp-opal.c

164

pr_err("XICS: hw interrupt 0x%x to offline cpu, "

arch/powerpc/sysdev/xics/ics-native.c

197

pr_err("Failed to map %pOFP\n", np);

arch/powerpc/sysdev/xics/ics-native.c

204

pr_err("Failed to read interrupt-ranges of %pOFP\n", np);

arch/powerpc/sysdev/xics/ics-native.c

215

pr_err("Failed to read interrupt-ranges of %pOFP\n", np);

arch/powerpc/sysdev/xics/ics-opal.c

110

pr_err("%s: opal_get_xive(irq=%d [hw 0x%x]) error %lld\n",

arch/powerpc/sysdev/xics/ics-opal.c

128

pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"

arch/powerpc/sysdev/xics/ics-opal.c

57

pr_err("%s: opal_set_xive(irq=%d [hw 0x%x] server=%x)"

arch/powerpc/sysdev/xics/ics-opal.c

79

pr_err("%s: opal_set_xive(0xff) irq=%u returned %lld\n",

arch/powerpc/sysdev/xics/xics-common.c

114

pr_err("Interrupt 0x%x (real) is invalid, disabling it.\n", vec);

arch/powerpc/sysdev/xics/xics-common.c

227

pr_err("%s: Can't find server for irq %d/%x\n",

arch/powerpc/sysdev/xics/xics-common.c

542

pr_err("XICS: Failed to create IRQ domain");

arch/powerpc/sysdev/xive/common.c

1224

pr_err("Failed to populate IPI data on CPU %d\n", cpu);

arch/powerpc/sysdev/xive/common.c

1231

pr_err("Failed to map IPI CPU %d\n", cpu);

arch/powerpc/sysdev/xive/common.c

533

pr_err("%s: cpu=%d xc=%p\n", __func__, cpu, xc);

arch/powerpc/sysdev/xive/common.c

763

pr_err("Error %d reconfiguring irq %d\n", rc, d->irq);

arch/powerpc/sysdev/xive/native.c

128

#define vp_err(vp, fmt, ...) pr_err("VP[0x%x]: " fmt, vp, ##__VA_ARGS__)

arch/powerpc/sysdev/xive/native.c

273

pr_err("Failed to allocate IPI on CPU %d\n", cpu);

arch/powerpc/sysdev/xive/native.c

372

pr_err("CPU %d odd ack CPPR, got %d at %d\n",

arch/powerpc/sysdev/xive/native.c

380

pr_err("CPU %d got unexpected interrupt type HE=%d\n",

arch/powerpc/sysdev/xive/native.c

414

pr_err("Failed to enable pool VP on CPU %d\n", cpu);

arch/powerpc/sysdev/xive/native.c

421

pr_err("Failed to get pool VP info CPU %d\n", cpu);

arch/powerpc/sysdev/xive/native.c

504

pr_err("Error %d getting provision chips array\n", rc);

arch/powerpc/sysdev/xive/native.c

520

pr_err("Error %d reading provision chips array\n", rc);

arch/powerpc/sysdev/xive/native.c

529

pr_err("Failed to allocate provision cache\n");

arch/powerpc/sysdev/xive/native.c

542

pr_err("Failed to allocate pool VP, KVM might not function\n");

arch/powerpc/sysdev/xive/native.c

579

pr_err("Failed to get thread mgmnt area resource\n");

arch/powerpc/sysdev/xive/native.c

58

pr_err("opal_xive_get_irq_info(0x%x) returned %lld\n",

arch/powerpc/sysdev/xive/native.c

584

pr_err("Failed to map thread mgmnt area\n");

arch/powerpc/sysdev/xive/native.c

610

pr_err("Failed to get thread mgmnt area resource\n");

arch/powerpc/sysdev/xive/native.c

622

pr_err("Switch to exploitation mode failed with error %lld\n", rc);

arch/powerpc/sysdev/xive/native.c

658

pr_err("Failed to allocate provisioning page\n");

arch/powerpc/sysdev/xive/native.c

691

pr_err("OPAL failed to allocate VCPUs order %d, err %lld\n",

arch/powerpc/sysdev/xive/native.c

77

pr_err("Failed to map EOI page for irq 0x%x\n", hw_irq);

arch/powerpc/sysdev/xive/native.c

92

pr_err("Failed to map trigger page for irq 0x%x\n", hw_irq);

arch/powerpc/sysdev/xive/spapr.c

171

pr_err("H_INT_RESET failed %ld\n", rc);

arch/powerpc/sysdev/xive/spapr.c

191

pr_err("H_INT_GET_SOURCE_INFO lisn=0x%lx failed %ld\n", lisn, rc);

arch/powerpc/sysdev/xive/spapr.c

228

pr_err("H_INT_SET_SOURCE_CONFIG lisn=0x%lx target=%ld prio=%ld failed %ld\n",

arch/powerpc/sysdev/xive/spapr.c

253

pr_err("H_INT_GET_SOURCE_CONFIG lisn=0x%lx failed %ld\n",

arch/powerpc/sysdev/xive/spapr.c

283

pr_err("H_INT_GET_QUEUE_INFO cpu=%ld prio=%ld failed %ld\n",

arch/powerpc/sysdev/xive/spapr.c

316

pr_err("H_INT_SET_QUEUE_CONFIG cpu=%ld prio=%ld qpage=0x%lx returned %ld\n",

arch/powerpc/sysdev/xive/spapr.c

333

pr_err("H_INT_SYNC lisn=0x%lx returned %ld\n", lisn, rc);

arch/powerpc/sysdev/xive/spapr.c

360

pr_err("H_INT_ESB lisn=0x%lx offset=0x%lx returned %ld\n",

arch/powerpc/sysdev/xive/spapr.c

431

pr_err("Failed to map EOI page for irq 0x%x\n", hw_irq);

arch/powerpc/sysdev/xive/spapr.c

444

pr_err("Failed to map trigger page for irq 0x%x\n", hw_irq);

arch/powerpc/sysdev/xive/spapr.c

503

pr_err("Error %lld getting queue info CPU %d prio %d\n", rc,

arch/powerpc/sysdev/xive/spapr.c

518

pr_err("Error %lld setting queue for CPU %d prio %d\n", rc,

arch/powerpc/sysdev/xive/spapr.c

555

pr_err("Error %ld setting queue for CPU %d prio %d\n", rc,

arch/powerpc/sysdev/xive/spapr.c

577

pr_err("Failed to allocate IPI on CPU %d\n", cpu);

arch/powerpc/sysdev/xive/spapr.c

639

pr_err("CPU %d odd ack CPPR, got %d at %d\n",

arch/powerpc/sysdev/xive/spapr.c

718

pr_err("not root node found !\n");

arch/powerpc/sysdev/xive/spapr.c

725

pr_err("Failed to read 'ibm,plat-res-int-priorities' property\n");

arch/powerpc/sysdev/xive/spapr.c

730

pr_err("invalid 'ibm,plat-res-int-priorities' property\n");

arch/powerpc/sysdev/xive/spapr.c

756

pr_err("no valid priority found in 'ibm,plat-res-int-priorities'\n");

arch/powerpc/sysdev/xive/spapr.c

837

pr_err("Failed to get thread mgmnt area resource\n");

arch/powerpc/sysdev/xive/spapr.c

842

pr_err("Failed to map thread mgmnt area\n");

arch/powerpc/sysdev/xive/spapr.c

852

pr_err("Failed to read 'ibm,xive-lisn-ranges' property\n");

arch/powerpc/sysdev/xive/spapr.c

857

pr_err("invalid 'ibm,xive-lisn-ranges' property\n");

arch/riscv/include/asm/pgtable-64.h

268

pr_err("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))

arch/riscv/include/asm/pgtable-64.h

271

pr_err("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e))

arch/riscv/include/asm/pgtable-64.h

274

pr_err("%s:%d: bad p4d %016lx.\n", __FILE__, __LINE__, p4d_val(e))

arch/riscv/include/asm/pgtable.h

568

pr_err("%s:%d: bad pgd " PTE_FMT ".\n", __FILE__, __LINE__, pgd_val(e))

arch/riscv/kernel/acpi.c

153

pr_err("Failed to init ACPI tables\n");

arch/riscv/kernel/acpi.c

197

pr_err("No valid RINTC entries exist\n");

arch/riscv/kernel/acpi.c

78

pr_err("Failed to get FADT table, %s\n", msg);

arch/riscv/kernel/acpi.c

93

pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 6.5+\n",

arch/riscv/kernel/acpi.c

97

pr_err("FADT not ACPI hardware reduced compliant\n");

arch/riscv/kernel/acpi_numa.c

113

pr_err("SRAT: Invalid SRAT header length: %d\n", pa->header.length);

arch/riscv/kernel/acpi_numa.c

125

pr_err("SRAT: Too many proximity domains %d\n", pxm);

arch/riscv/kernel/cpu.c

227

pr_err("cpuinfo: failed to register hotplug callbacks.\n");

arch/riscv/kernel/cpufeature.c

101

pr_err("Zicbom disabled as cbom-block-size present, but is not a power-of-2\n");

arch/riscv/kernel/cpufeature.c

113

pr_err("Zicboz detected in ISA string, disabling as no cboz-block-size found\n");

arch/riscv/kernel/cpufeature.c

117

pr_err("Zicboz disabled as cboz-block-size present, but is not a power-of-2\n");

arch/riscv/kernel/cpufeature.c

128

pr_err("Zicbop detected in ISA string, disabling as no cbop-block-size found\n");

arch/riscv/kernel/cpufeature.c

132

pr_err("Zicbop disabled as cbop-block-size present, but is not a power-of-2\n");

arch/riscv/kernel/cpufeature.c

638

pr_err("Failed to reach a stable ISA state\n");

arch/riscv/kernel/cpufeature.c

97

pr_err("Zicbom detected in ISA string, disabling as no cbom-block-size found\n");

arch/riscv/kernel/ftrace.c

67

pr_err("%p: expected (%08x) but got (%08x)\n",

arch/riscv/kernel/hibernate.c

408

pr_err("Failing to resume from hibernate on an unknown CPU\n");

arch/riscv/kernel/kexec_image.c

77

pr_err("Error add kernel image ret=%d\n", ret);

arch/riscv/kernel/machine_kexec.c

57

pr_err("Device tree not included in the provided image\n");

arch/riscv/kernel/machine_kexec.c

67

pr_err("Relocation code doesn't fit within a control page\n");

arch/riscv/kernel/machine_kexec_file.c

101

pr_err("Appending elfcorehdr=<addr> exceeds cmdline size\n");

arch/riscv/kernel/machine_kexec_file.c

184

pr_err("Invalid section %d for symbol %s\n",

arch/riscv/kernel/machine_kexec_file.c

248

pr_err("Unknown rela relocation: %d\n", r_type);

arch/riscv/kernel/machine_kexec_file.c

278

pr_err("Preparing elf core header failed\n");

arch/riscv/kernel/machine_kexec_file.c

305

pr_err("Setting up cmdline for kdump kernel failed\n");

arch/riscv/kernel/machine_kexec_file.c

319

pr_err("Error loading purgatory ret=%d\n", ret);

arch/riscv/kernel/machine_kexec_file.c

328

pr_err("Error update purgatory ret=%d\n", ret);

arch/riscv/kernel/machine_kexec_file.c

349

pr_err("Error setting up the new device tree.\n");

arch/riscv/kernel/machine_kexec_file.c

362

pr_err("Error add DTB kbuf ret=%d\n", ret);

arch/riscv/kernel/module-sections.c

139

pr_err("%s: module PLT section(s) missing\n", mod->name);

arch/riscv/kernel/module-sections.c

143

pr_err("%s: module GOT section(s) missing\n", mod->name);

arch/riscv/kernel/module-sections.c

147

pr_err("%s: module GOT.PLT section(s) missing\n", mod->name);

arch/riscv/kernel/module.c

158

pr_err(

arch/riscv/kernel/module.c

194

pr_err(

arch/riscv/kernel/module.c

234

pr_err(

arch/riscv/kernel/module.c

254

pr_err(

arch/riscv/kernel/module.c

274

pr_err(

arch/riscv/kernel/module.c

295

pr_err(

arch/riscv/kernel/module.c

358

pr_err("%s: Dynamic linking not supported in kernel modules PC = %p\n",

arch/riscv/kernel/module.c

365

pr_err("%s: Thread local storage not supported in kernel modules PC = %p\n",

arch/riscv/kernel/module.c

425

pr_err("%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",

arch/riscv/kernel/module.c

453

pr_err("%s: value %ld out of range for 6-bit relocation.\n",

arch/riscv/kernel/module.c

465

pr_err("%s: value %ld out of range for 8-bit relocation.\n",

arch/riscv/kernel/module.c

476

pr_err("%s: value %ld out of range for 16-bit relocation.\n",

arch/riscv/kernel/module.c

487

pr_err("%s: value %ld out of range for 32-bit relocation.\n",

arch/riscv/kernel/module.c

816

pr_err("%s: Unknown relocation type %u\n",

arch/riscv/kernel/module.c

83

pr_err("%s: value %016llx out of range for 32-bit field\n",

arch/riscv/kernel/module.c

868

pr_err(

arch/riscv/kernel/sbi-ipi.c

50

pr_err("unable to find INTC IRQ domain\n");

arch/riscv/kernel/sbi-ipi.c

56

pr_err("unable to create INTC IRQ mapping\n");

arch/riscv/kernel/sbi-ipi.c

62

pr_err("unable to create muxed IPIs\n");

arch/riscv/kernel/sbi.c

142

pr_err("SBI call [%d]not supported in SBI v0.1\n", fid);

arch/riscv/kernel/sbi.c

199

pr_err("%s: hbase = [%lu] failed (error [%d])\n",

arch/riscv/kernel/sbi.c

243

pr_err("unknown function ID [%lu] for SBI extension [%d]\n",

arch/riscv/kernel/sbi.c

250

pr_err("%s: hbase = [%lu] hmask = [0x%lx] failed (error [%d])\n",

arch/riscv/kernel/setup.c

273

pr_err("No DTB passed to the kernel\n");

arch/riscv/kernel/setup.c

309

pr_err("Queued spinlock without Zabha or Ziccrse");

arch/riscv/kernel/setup.c

82

pr_err("Failed to add a %s resource at %llx\n",

arch/riscv/net/bpf_jit.h

208

pr_err("bpf-jit: insn=%d 12b < offset=%d not supported yet!\n",

arch/riscv/net/bpf_jit_comp32.c

1088

pr_err("bpf-jit: BPF_END imm %d invalid\n", imm);

arch/riscv/net/bpf_jit_comp32.c

1122

pr_err("bpf-jit: BPF_END imm %d invalid\n", imm);

arch/riscv/net/bpf_jit_comp32.c

1296

pr_err("bpf-jit: unknown opcode %02x\n", code);

arch/riscv/net/bpf_jit_comp64.c

178

pr_err("bpf-jit: target offset 0x%llx is out of range\n", off);

arch/riscv/net/bpf_jit_comp64.c

1988

pr_err("bpf-jit: unknown opcode %02x\n", code);

arch/riscv/net/bpf_jit_comp64.c

443

pr_err("bpf-jit: target offset 0x%llx is out of range\n", rvoff);

arch/riscv/net/bpf_jit_comp64.c

740

pr_err("bpf-jit: invalid size %d for sign_extend\n", sz);

arch/riscv/net/bpf_jit_core.c

152

pr_err("bpf-jit: image did not converge in <%d passes!\n", i);

arch/s390/appldata/appldata_base.c

319

pr_err("Starting the data collection for %s "

arch/s390/appldata/appldata_base.c

330

pr_err("Stopping the data collection for %s "

arch/s390/appldata/appldata_os.c

139

pr_err("Starting a new OS data collection "

arch/s390/appldata/appldata_os.c

147

pr_err("Stopping a faulty OS data "

arch/s390/appldata/appldata_os.c

168

pr_err("Maximum OS record size %i exceeds the maximum "

arch/s390/crypto/aes_s390.c

161

pr_err("Allocating AES fallback algorithm %s failed\n",

arch/s390/crypto/aes_s390.c

393

pr_err("Allocating XTS fallback algorithm %s failed\n",

arch/s390/crypto/hmac_s390.c

404

pr_err("unable to register %s\n",

arch/s390/crypto/prng.c

343

pr_err("The prng self test state test "

arch/s390/crypto/prng.c

357

pr_err("The prng self test data test "

arch/s390/crypto/prng.c

835

pr_err("The prng module cannot "

arch/s390/hypfs/hypfs_dbfs.c

123

pr_err("Initialization of hypfs failed with rc=%i\n", rc);

arch/s390/hypfs/hypfs_diag.c

215

pr_err("The hardware system does not provide all functions required by hypfs\n");

arch/s390/hypfs/inode.c

176

pr_err("Updating the hypfs tree failed\n");

arch/s390/include/asm/pgtable.h

70

pr_err("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))

arch/s390/include/asm/pgtable.h

72

pr_err("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))

arch/s390/include/asm/pgtable.h

74

pr_err("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e))

arch/s390/include/asm/pgtable.h

76

pr_err("%s:%d: bad p4d %016lx.\n", __FILE__, __LINE__, p4d_val(e))

arch/s390/include/asm/pgtable.h

78

pr_err("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))

arch/s390/include/asm/uv.h

591

pr_err("%s UVC failed (rc: 0x%x, rrc: 0x%x), possible hypervisor bug.\n",

arch/s390/kernel/debug.c

1365

pr_err("Registering view %s/%s would exceed the maximum "

arch/s390/kernel/debug.c

822

pr_err("Registering debug feature %s failed\n", name);

arch/s390/kernel/debug.c

870

pr_err("Tried to register debug feature %s too early\n",

arch/s390/kernel/debug.c

878

pr_err("Registering debug feature %s failed\n", id->name);

arch/s390/kernel/kprobes.c

272

pr_err("Failed to recover from reentered kprobes.\n");

arch/s390/kernel/machine_kexec_file.c

274

pr_err("Kernel command line exceeds supported limit of %lu", max_command_line_size);

arch/s390/kernel/machine_kexec_file.c

344

pr_err("Undefined symbol: %s\n", name);

arch/s390/kernel/machine_kexec_file.c

349

pr_err("symbol '%s' in common section\n", name);

arch/s390/kernel/machine_kexec_file.c

355

pr_err("Invalid section %d for symbol %s\n",

arch/s390/kernel/machine_kexec_file.c

378

pr_err("Unknown rela relocation: %d\n", r_type);

arch/s390/kernel/perf_cpum_cf.c

1172

pr_err("CPU[%i] Counter data was lost\n", smp_processor_id());

arch/s390/kernel/perf_cpum_cf.c

1203

pr_err("Registering for CPU-measurement alerts failed with rc=%i\n", rc);

arch/s390/kernel/perf_cpum_cf.c

1210

pr_err("Registration of s390dbf(cpum_cf) failed\n");

arch/s390/kernel/perf_cpum_cf.c

1219

pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc);

arch/s390/kernel/perf_cpum_cf.c

1326

pr_err("Counter set stop %#llx of /dev/%s failed rc=%i\n",

arch/s390/kernel/perf_cpum_cf.c

1349

pr_err("Counter set start %#llx of /dev/%s failed rc=%i\n",

arch/s390/kernel/perf_cpum_cf.c

1361

pr_err("Counter set release %#llx of /dev/%s failed rc=%i\n",

arch/s390/kernel/perf_cpum_cf.c

1925

pr_err("Insufficient memory for PMU(cpum_cf_diag) need=%zu\n",

arch/s390/kernel/perf_cpum_cf.c

1932

pr_err("Registration of /dev/%s failed rc=%i\n",

arch/s390/kernel/perf_cpum_cf.c

1940

pr_err("Registration of PMU(cpum_cf_diag) failed with rc=%i\n",

arch/s390/kernel/perf_cpum_cf.c

683

pr_err("Enabling the performance measuring unit failed with rc=%x\n", err);

arch/s390/kernel/perf_cpum_cf.c

706

pr_err("Disabling the performance measuring unit failed with rc=%x\n", err);

arch/s390/kernel/perf_cpum_sf.c

1514

pr_err("The AUX buffer with %lu pages for the "

arch/s390/kernel/perf_cpum_sf.c

1537

pr_err("Sample data caused the AUX buffer with %lu "

arch/s390/kernel/perf_cpum_sf.c

1604

pr_err("AUX buffer size (%i pages) is larger than the "

arch/s390/kernel/perf_cpum_sf.c

1609

pr_err("AUX buffer size (%i pages) is less than the "

arch/s390/kernel/perf_cpum_sf.c

1956

pr_err("Sample data was lost\n");

arch/s390/kernel/perf_cpum_sf.c

1963

pr_err("A sampling buffer entry is incorrect (alert=%#x)\n",

arch/s390/kernel/perf_cpum_sf.c

2045

pr_err("Sampling facility support for perf is not available: "

arch/s390/kernel/perf_cpum_sf.c

2078

pr_err("Registering for s390dbf failed\n");

arch/s390/kernel/perf_cpum_sf.c

930

pr_err("Loading sampling controls failed: op 1 err %i\n", err);

arch/s390/kernel/perf_cpum_sf.c

959

pr_err("Loading sampling controls failed: op 2 err %i\n", err);

arch/s390/kernel/perf_pai.c

1124

pr_err("Creation of PMU %s /sysfs failed\n", p->pmuname);

arch/s390/kernel/perf_pai.c

1131

pr_err("Registering PMU %s failed with rc=%i\n", p->pmuname,

arch/s390/kernel/perf_pai.c

1191

pr_err("Too many PMU %s counters %d\n",

arch/s390/kernel/perf_pai.c

1215

pr_err("Registration of s390dbf pai failed\n");

arch/s390/kernel/uv.c

51

pr_err("Ultravisor init failed with rc: 0x%x rrc: 0%x\n",

arch/s390/kvm/interrupt.c

3424

pr_err("Registering the GIB alert interruption handler failed\n");

arch/s390/kvm/interrupt.c

3434

pr_err("Associating the GIB with the AIV facility failed\n");

arch/s390/kvm/interrupt.c

3443

pr_err("Initializing AEN for PCI failed\n");

arch/s390/kvm/kvm-s390.c

512

pr_err("A FLIC registration call failed with rc=%d\n", rc);

arch/s390/kvm/kvm-s390.c

519

pr_err("Unable to allocate AIFT for PCI\n");

arch/s390/mm/extmem.c

556

pr_err("Unloading unknown DCSS %s failed\n", name);

arch/s390/mm/extmem.c

596

pr_err("Saving unknown DCSS %s failed\n", name);

arch/s390/mm/extmem.c

613

pr_err("Saving a DCSS failed with DEFSEG response code "

arch/s390/mm/extmem.c

619

pr_err("Saving a DCSS failed with SAVESEG response code "

arch/s390/mm/extmem.c

635

pr_err("DCSS %s cannot be loaded or queried\n", seg_name);

arch/s390/mm/extmem.c

638

pr_err("DCSS %s cannot be loaded or queried without "

arch/s390/mm/extmem.c

642

pr_err("Loading or querying DCSS %s resulted in a "

arch/s390/mm/extmem.c

646

pr_err("DCSS %s has multiple page ranges and cannot be "

arch/s390/mm/extmem.c

650

pr_err("%s needs used memory resources and cannot be "

arch/s390/mm/extmem.c

654

pr_err("DCSS %s is already loaded in a different access "

arch/s390/mm/extmem.c

658

pr_err("There is not enough memory to load or query "

arch/s390/mm/extmem.c

664

pr_err("DCSS %s exceeds the kernel mapping range (%llu) "

arch/s390/net/bpf_jit_comp.c

1667

pr_err("Unknown atomic operation %02x\n", insn->imm);

arch/s390/net/bpf_jit_comp.c

2147

pr_err("Unknown opcode %02x\n", insn->code);

arch/s390/pci/pci.c

659

pr_err("Domain %04x is already assigned\n", domain);

arch/s390/pci/pci_bus.c

358

pr_err("Failed to allocate DMA range map for %s\n", pci_name(pdev));

arch/s390/pci/pci_bus.c

390

pr_err("devfn %04x is already assigned\n", zdev->devfn);

arch/s390/pci/pci_bus.c

471

pr_err("Adding PCI function %08x failed\n", zdev->fid);

arch/s390/pci/pci_bus.c

49

pr_err("Enabling PCI function %08x failed\n", zdev->fid);

arch/s390/pci/pci_event.c

113

pr_err("%s: Unblocking device access failed\n", pci_name(pdev));

arch/s390/pci/pci_event.c

137

pr_err("%s: Unblocking DMA failed\n", pci_name(pdev));

arch/s390/pci/pci_event.c

152

pr_err("%s: The reset request failed\n", pci_name(pdev));

arch/s390/pci/pci_event.c

248

pr_err("%s: Automatic recovery failed; operator intervention is required\n",

arch/s390/pci/pci_event.c

320

pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n",

arch/s390/pci/pci_irq.c

385

pr_err("Allocating adapter IRQs for %s failed\n", pci_name(pdev));

arch/s390/pci/pci_irq.c

393

pr_err("Registering adapter IRQs for %s failed\n",

arch/s390/pci/pci_irq.c

515

pr_err("Failed to allocate fwnode for MSI IRQ domain\n");

arch/s390/pci/pci_irq.c

525

pr_err("Failed to create MSI IRQ domain\n");

arch/s390/pci/pci_report.c

138

pr_err("Reading PCI debug messages failed with code %d\n", ret);

arch/s390/pci/pci_report.c

150

pr_err("Reporting PCI status failed with code %d\n", ret);

arch/sh/boards/mach-dreamcast/irq.c

149

pr_err("%s: failed hooking irqs\n", __func__);

arch/sh/boards/mach-ecovec24/setup.c

1076

pr_err("can not get I2C 1\n");

arch/sh/boards/mach-ecovec24/setup.c

1091

pr_err("unable to read sh_eth MAC address\n");

arch/sh/boards/mach-sdk7786/setup.c

212

pr_err("FPGA clock registration failed\n");

arch/sh/boards/mach-sdk7786/sram.c

36

pr_err("FPGA memory unmapped.\n");

arch/sh/boards/mach-sdk7786/sram.c

52

pr_err("Failed remapping FPGA memory.\n");

arch/sh/boards/mach-sdk7786/sram.c

62

pr_err("Failed adding memory\n");

arch/sh/boards/mach-se/7343/irq.c

111

pr_err("Failed to remap CPLD\n");

arch/sh/boards/mach-se/7724/irq.c

127

pr_err("%s: failed hooking irqs for FPGA\n", __func__);

arch/sh/boards/mach-x3proto/ilsel.c

97

pr_err("Aliased sources must use ilsel_enable_fixed()\n");

arch/sh/cchips/hd6446x/hd64461.c

92

pr_err("%s: failed hooking irqs for HD64461\n", __func__);

arch/sh/drivers/dma/dma-pvr2.c

84

pr_err("Failed to register pvr2 DMA handler interrupt\n");

arch/sh/drivers/pci/pci-sh7780.c

182

pr_err("PCI: Failed hooking SERR IRQ\n");

arch/sh/drivers/pci/pci-sh7780.c

273

pr_err("PCI: Unknown vendor ID 0x%04x.\n", id);

arch/sh/drivers/pci/pci-sh7780.c

284

pr_err("PCI: Found an unsupported Renesas host controller, device id 0x%04x.\n",

arch/sh/drivers/pci/pcie-sh7786.c

515

pr_err("clock initialization failed for port#%d\n",

arch/sh/drivers/pci/pcie-sh7786.c

522

pr_err("phy initialization failed for port#%d\n",

arch/sh/drivers/pci/pcie-sh7786.c

529

pr_err("core initialization failed for port#%d\n",

arch/sh/kernel/cpu/clock.c

27

pr_err("%s: CPU clock registration failed.\n", __func__);

arch/sh/kernel/cpu/clock.c

35

pr_err("%s: machvec clock initialization failed.\n",

arch/sh/kernel/cpu/sh4a/setup-shx3.c

352

pr_err("Failed to set IRQ mode\n");

arch/sh/kernel/cpu/sh4a/setup-shx3.c

365

pr_err("Failed to set IRL mode\n");

arch/sh/kernel/cpu/sh4a/smp-shx3.c

78

pr_err("Failed to request irq %d\n", i);

arch/sh/kernel/disassemble.c

561

pr_err(" (Bad address in pc)\n");

arch/sh/kernel/machine_kexec.c

164

pr_err("crashkernel allocation failed\n");

arch/sh/kernel/machine_kexec.c

170

pr_err("crashkernel reservation failed - "

arch/sh/kernel/setup.c

135

pr_err("initrd must be page aligned\n");

arch/sh/kernel/setup.c

140

pr_err("initrd start (%08lx) < __MEMORY_START(%x)\n",

arch/sh/kernel/setup.c

146

pr_err("initrd extends beyond end of memory "

arch/sh/kernel/setup.c

210

pr_err("unable to request memory_resource 0x%lx 0x%lx\n",

arch/sh/kernel/smp.c

101

pr_err("CPU %u didn't die...\n", cpu);

arch/sparc/include/asm/pgtable_64.h

100

pr_err("%s:%d: bad pmd %p(%016lx) seen at (%pS)\n", \

arch/sparc/include/asm/pgtable_64.h

103

pr_err("%s:%d: bad pud %p(%016lx) seen at (%pS)\n", \

arch/sparc/include/asm/pgtable_64.h

106

pr_err("%s:%d: bad pgd %p(%016lx) seen at (%pS)\n", \

arch/sparc/kernel/ds.c

790

pr_err(PFX

arch/sparc/kernel/ds.c

867

pr_err("SUN4V: Unable to set reboot data "

arch/sparc/kernel/irq_64.c

262

pr_err("HV get cookie failed hv_err = %ld\n", hv_err);

arch/sparc/kernel/irq_64.c

659

pr_err("IRQ handler data allocation failed.\n");

arch/sparc/kernel/irq_64.c

688

pr_err("HV vintr set cookie failed = %ld\n", hv_error);

arch/sparc/kernel/leon_kernel.c

456

pr_err("Unable to attach timer IRQ%d\n", irq);

arch/sparc/kernel/mdesc.c

305

pr_err("MD: %s node not supported\n", client->node_name);

arch/sparc/kernel/mdesc.c

446

pr_err("MD: %s node type is not supported\n", name);

arch/sparc/kernel/mdesc.c

455

pr_err("MD: Cannot find 1 or more required match properties for %s node.\n",

arch/sparc/kernel/mdesc.c

563

pr_err("MD: %s node is not supported\n", node_name);

arch/sparc/kernel/mdesc.c

599

pr_err("MD: %s node is not supported\n", node_name);

arch/sparc/kernel/mdesc.c

605

pr_err("MD: Cannot find 1 or more required match properties for %s node.\n",

arch/sparc/kernel/pci.c

926

pr_err("PCI: pci_create_slot returned %ld.\n",

arch/sparc/kernel/pci_sun4v.c

1220

pr_err(PFX "ATU init failed, err=%d\n", err);

arch/sparc/kernel/pci_sun4v.c

1256

pr_err(PFX "Could not register hvapi, err=%d\n", err);

arch/sparc/kernel/pci_sun4v.c

1314

pr_err(PFX "Could not allocate atu\n");

arch/sparc/kernel/pci_sun4v.c

789

pr_err(PFX "pci_iotsb_conf failed error: %ld\n", err);

arch/sparc/kernel/pci_sun4v.c

796

pr_err(PFX "pci_iotsb_bind failed error: %ld\n", err);

arch/sparc/kernel/pci_sun4v.c

823

pr_err(PFX "No iommu-address-ranges\n");

arch/sparc/kernel/pci_sun4v.c

830

pr_err(PFX "No iommu-pagesizes\n");

arch/sparc/kernel/pci_sun4v.c

851

pr_err(PFX "Error creating ATU IOTSB\n");

arch/sparc/kernel/pcr.c

292

pr_err("perfmon: Could not register hvapi(0x%lx).\n",

arch/sparc/kernel/vio.c

387

pr_err("VIO: Could not get MD node info %s, err=%d\n",

arch/sparc/kernel/vio.c

454

pr_err("VIO: %s node not found in MDESC\n", node_name);

arch/sparc/net/bpf_jit_comp_32.c

714

pr_err("bpb_jit_compile fatal error\n");

arch/sparc/net/bpf_jit_comp_32.c

734

pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n",

arch/sparc/net/bpf_jit_comp_64.c

1592

pr_err("bpf_jit: Failed to converge, prev_size=%u size=%d\n",

arch/sparc/vdso/vma.c

124

pr_err("VDSO64: Missing symbols.\n");

arch/sparc/vdso/vma.c

164

pr_err("VDSO32: Missing symbol sections.\n");

arch/sparc/vdso/vma.c

192

pr_err("VDSO32: Missing symbols.\n");

arch/sparc/vdso/vma.c

96

pr_err("VDSO64: Missing symbol sections.\n");

arch/um/drivers/random.c

88

pr_err(RNG_MODULE_NAME " registering failed (%d)\n", err);

arch/um/drivers/ubd_kern.c

1281

pr_err("write to io thread failed: %d\n", -ret);

arch/um/drivers/ubd_kern.c

472

pr_err("spurious interrupt in %s, err = %d\n", __func__, len);

arch/um/drivers/ubd_kern.c

858

pr_err("ubd%c: Can't open \"%s\": errno = %d\n",

arch/um/drivers/vector_kern.c

1586

pr_err("Failed to allocate struct vector_device for vec%d\n", n);

arch/um/drivers/vector_kern.c

1591

pr_err("Failed to allocate struct net_device for vec%d\n", n);

arch/um/drivers/vector_kern.c

1705

pr_err("Couldn't parse '%s': %s\n", str, error);

arch/um/drivers/vfio_kern.c

491

pr_err("Failed to get group id (%s), error %d\n",

arch/um/drivers/vfio_kern.c

498

pr_err("Failed to open group %d (%s), error %d\n",

arch/um/drivers/vfio_kern.c

505

pr_err("Failed to setup device (%s), error %d\n",

arch/um/drivers/vfio_kern.c

512

pr_err("Failed to read MSI-X table (%s), error %d\n",

arch/um/drivers/vfio_kern.c

520

pr_err("Failed to allocate interrupt context (%s)\n",

arch/um/drivers/vfio_kern.c

535

pr_err("Failed to register UM PCI device (%s), error %d\n",

arch/um/drivers/virt-pci.c

395

pr_err("trying to free unused MSI#%lu\n", d->hwirq);

arch/um/drivers/virtio_uml.c

1338

pr_err("Failed to register parent device!\n");

arch/um/kernel/dtb.c

21

pr_err("invalid DTB %s\n", dtb);

arch/um/kernel/smp.c

94

pr_err("CPU#%d received unknown IPI (vector=%d)!\n", cpu, vector);

arch/x86/coco/sev/core.c

1025

pr_err("Secure AVIC MSR (0x%llx) write returned error (%d)\n", msr, res);

arch/x86/coco/sev/core.c

143

pr_err("Unable to locate AP jump table address: failed to map the SNP secrets page.\n");

arch/x86/coco/sev/core.c

1506

pr_err("failed to mark page shared, ret=%d\n", ret);

arch/x86/coco/sev/core.c

1551

pr_err("Crypto context initialization failed\n");

arch/x86/coco/sev/core.c

1567

pr_err("Invalid VMPCK%d communication key\n", vmpck_id);

arch/x86/coco/sev/core.c

1573

pr_err("Empty VMPCK%d communication key\n", vmpck_id);

arch/x86/coco/sev/core.c

1694

pr_err("request message sequence counter overflow\n");

arch/x86/coco/sev/core.c

1991

pr_err("Failed to get TSC info, response status 0x%x\n", tsc_resp->status);

arch/x86/coco/sev/core.c

2037

pr_err("Unable to get TSC_FACTOR: failed to map the SNP secrets page.\n");

arch/x86/coco/sev/core.c

468

pr_err("SNP AP %s error\n", (create ? "CREATE" : "DESTROY"));

arch/x86/coco/sev/core.c

530

pr_err("clear VMSA page failed (%u), leaking page\n", err);

arch/x86/coco/sev/core.c

865

pr_err("set VMSA page failed (%u)\n", ret);

arch/x86/coco/sev/core.c

995

pr_err("Secure AVIC MSR (0x%llx) read returned error (%d)\n", msr, res);

arch/x86/coco/tdx/tdx.c

1080

pr_err("Failed to unshare range %#lx-%#lx\n",

arch/x86/coco/tdx/tdx.c

1094

pr_err("shared page accounting is off\n");

arch/x86/coco/tdx/tdx.c

1095

pr_err("nr_shared = %ld, nr_found = %ld\n", shared, found);

arch/x86/coco/tdx/tdx.c

308

pr_err("VMM did not configure X2APIC_IDs properly\n");

arch/x86/events/amd/ibs.c

1571

pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n",

arch/x86/events/amd/ibs.c

1577

pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n",

arch/x86/events/amd/power.c

277

pr_err("Failed to read max compute unit power accumulator MSR\n");

arch/x86/events/core.c

340

pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n",

arch/x86/events/core.c

351

pr_err("Failed to access perfctr msr (MSR %x is %Lx)\n",

arch/x86/hyperv/hv_crash.c

466

pr_err("%s: trampoline page overflow\n", __func__);

arch/x86/hyperv/hv_crash.c

551

pr_err("%s: failed to alloc asm stub page\n", __func__);

arch/x86/hyperv/hv_crash.c

561

pr_err("%s: failed to alloc pt pages\n", __func__);

arch/x86/hyperv/hv_crash.c

595

pr_err("Hyper-V: crash dump not yet supported on 5level PTs\n");

arch/x86/hyperv/hv_crash.c

602

pr_err("Hyper-V: failed to register crash nmi handler\n");

arch/x86/hyperv/hv_crash.c

618

pr_err("Hyper-V: %s: property:%d %s\n", __func__,

arch/x86/hyperv/hv_crash.c

624

pr_err("Hyper-V: hypervisor crash dump area pfn is 0\n");

arch/x86/hyperv/hv_crash.c

646

pr_err("Hyper-V: only linux root kdump support enabled\n");

arch/x86/hyperv/hv_init.c

738

pr_err("failed to get vp index from apic id %d, status %#llx\n",

arch/x86/hyperv/hv_vtl.c

202

pr_err("HVCALL_ENABLE_VP_VTL failed for VP : %d ! [Err: %#llx\n]",

arch/x86/hyperv/hv_vtl.c

211

pr_err("HVCALL_START_VP failed for VP : %d ! [Err: %#llx]\n",

arch/x86/hyperv/hv_vtl.c

230

pr_err("Couldn't find CPU with APIC ID %d\n", apicid);

arch/x86/hyperv/hv_vtl.c

234

pr_err("Invalid CPU id %d for APIC ID %d\n", vp_index, apicid);

arch/x86/hyperv/irqdomain.c

50

pr_err("%s: unable to generate VP set\n", __func__);

arch/x86/hyperv/ivm.c

290

pr_err("clear VMSA page failed (%u), leaking page\n", err);

arch/x86/hyperv/ivm.c

352

pr_err("RMPADJUST(%llx) failed: %llx\n", (u64)vmsa, ret);

arch/x86/hyperv/ivm.c

373

pr_err("HvCallStartVirtualProcessor failed: %llx\n", ret);

arch/x86/hyperv/ivm.c

690

pr_err("Hyper-V: GPA count:%d exceeds supported:%lu\n", count,

arch/x86/include/asm/iommu.h

35

pr_err(FW_BUG "No firmware reserved region can cover this RMRR [%#018Lx-%#018Lx], contact BIOS vendor for fixes\n",

arch/x86/include/asm/pgtable-2level.h

6

pr_err("%s:%d: bad pte %08lx\n", __FILE__, __LINE__, (e).pte_low)

arch/x86/include/asm/pgtable-2level.h

8

pr_err("%s:%d: bad pgd %08lx\n", __FILE__, __LINE__, pgd_val(e))

arch/x86/include/asm/pgtable-3level.h

13

pr_err("%s:%d: bad pte %p(%08lx%08lx)\n", \

arch/x86/include/asm/pgtable-3level.h

16

pr_err("%s:%d: bad pmd %p(%016Lx)\n", \

arch/x86/include/asm/pgtable-3level.h

19

pr_err("%s:%d: bad pgd %p(%016Lx)\n", \

arch/x86/include/asm/pgtable_64.h

33

pr_err("%s:%d: bad pte %p(%016lx)\n", \

arch/x86/include/asm/pgtable_64.h

36

pr_err("%s:%d: bad pmd %p(%016lx)\n", \

arch/x86/include/asm/pgtable_64.h

39

pr_err("%s:%d: bad pud %p(%016lx)\n", \

arch/x86/include/asm/pgtable_64.h

43

pr_err("%s:%d: bad p4d %p(%016lx)\n", \

arch/x86/include/asm/pgtable_64.h

47

pr_err("%s:%d: bad pgd %p(%016lx)\n", \

arch/x86/kernel/acpi/boot.c

1045

pr_err("Error parsing LAPIC address override entry\n");

arch/x86/kernel/acpi/boot.c

1083

pr_err("Error parsing LAPIC/X2APIC entries\n");

arch/x86/kernel/acpi/boot.c

1090

pr_err("No LAPIC entries present\n");

arch/x86/kernel/acpi/boot.c

1094

pr_err("Error parsing LAPIC entry\n");

arch/x86/kernel/acpi/boot.c

1104

pr_err("Error parsing LAPIC NMI entry\n");

arch/x86/kernel/acpi/boot.c

1210

pr_err("No IOAPIC entries present\n");

arch/x86/kernel/acpi/boot.c

1213

pr_err("Error parsing IOAPIC entry\n");

arch/x86/kernel/acpi/boot.c

1221

pr_err("Error parsing interrupt source overrides entry\n");

arch/x86/kernel/acpi/boot.c

1242

pr_err("Error parsing NMI SRC entry\n");

arch/x86/kernel/acpi/boot.c

1275

pr_err("Invalid BIOS MADT, disabling ACPI\n");

arch/x86/kernel/acpi/boot.c

1320

pr_err("Invalid BIOS MADT, disabling ACPI\n");

arch/x86/kernel/acpi/madt_wakeup.c

59

pr_err("Failed to hand over CPU %d to BIOS\n", cpu);

arch/x86/kernel/alternative.c

1302

pr_err("CFI: ignoring paranoid; depends on fineibt.\n");

arch/x86/kernel/alternative.c

1309

pr_err("CFI: ignoring bhi; depends on fineibt.\n");

arch/x86/kernel/alternative.c

1312

pr_err("CFI: ignoring bhi; depends on FINEIBT_BHI=y.\n");

arch/x86/kernel/alternative.c

1315

pr_err("CFI: Ignoring unknown option (%s).", str);

arch/x86/kernel/alternative.c

1880

pr_err("Something went horribly wrong trying to rewrite the CFI implementation.\n");

arch/x86/kernel/alternative.c

266

pr_err("ITS page allocation failed\n");

arch/x86/kernel/alternative.c

550

pr_err("ALT_FLAG_DIRECT_CALL set for a non-call replacement instruction\n");

arch/x86/kernel/alternative.c

557

pr_err("ALT_FLAG_DIRECT_CALL set for unrecognized indirect call\n");

arch/x86/kernel/aperture_64.c

126

pr_err("Cannot allocate aperture memory hole [mem %#010lx-%#010lx] (%uKB)\n",

arch/x86/kernel/aperture_64.c

178

pr_err("pci 0000:%02x:%02x.%d: APSIZE unreadable\n",

arch/x86/kernel/aperture_64.c

463

pr_err("you are using iommu with agp, but GART size is less than 64MB\n");

arch/x86/kernel/aperture_64.c

464

pr_err("please increase GART size in your BIOS setup\n");

arch/x86/kernel/aperture_64.c

465

pr_err("if BIOS doesn't have that option, contact your HW vendor!\n");

arch/x86/kernel/apic/apic.c

1275

pr_err(FW_BUG "Local APIC not detected, force emulation\n");

arch/x86/kernel/apic/apic.c

1888

pr_err("Kernel does not support x2APIC, please recompile with CONFIG_X86_X2APIC.\n");

arch/x86/kernel/apic/apic.c

1889

pr_err("Disabling APIC, expect reduced performance and functionality.\n");

arch/x86/kernel/apic/apic.c

391

pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "

arch/x86/kernel/apic/apic.c

399

pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "

arch/x86/kernel/apic/apic.c

565

pr_err(FW_BUG "TSC_DEADLINE disabled due to Errata; "

arch/x86/kernel/apic/io_apic.c

1010

pr_err("broken BIOS or MPTABLE parser, ayiee!!\n");

arch/x86/kernel/apic/io_apic.c

1388

pr_err(FW_BUG "IO-APIC#%d ID is %d in the MPC table!...\n",

arch/x86/kernel/apic/io_apic.c

1390

pr_err("... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID);

arch/x86/kernel/apic/io_apic.c

1400

pr_err(FW_BUG "IO-APIC#%d ID %d is already used!...\n",

arch/x86/kernel/apic/io_apic.c

1407

pr_err("... fixing up to %d. (tell your hw vendor)\n", i);

arch/x86/kernel/apic/io_apic.c

2132

pr_err("..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");

arch/x86/kernel/apic/io_apic.c

228

pr_err("IOAPIC %d: suspend/resume impossible!\n", idx);

arch/x86/kernel/apic/io_apic.c

2424

pr_err("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);

arch/x86/kernel/apic/io_apic.c

2563

pr_err("WARNING: bogus zero IO-APIC address found in MPTABLE, "

arch/x86/kernel/apic/io_apic.c

2596

pr_err("IO APIC resources couldn't be allocated.\n");

arch/x86/kernel/apic/io_apic.c

2621

pr_err("ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);

arch/x86/kernel/apic/io_apic.c

353

pr_err("Cannot allocate irq_pin_list (%d,%d,%d)\n", node, apic, pin);

arch/x86/kernel/apic/io_apic.c

508

pr_err("Unable to reset IRR for apic: %d, pin :%d\n",

arch/x86/kernel/apic/vector.c

445

pr_err("Managed startup for irq %u, but no CPU\n", irqd->irq);

arch/x86/kernel/apic/vector.c

455

pr_err("Managed startup irq %u, no vector available\n",

arch/x86/kernel/apic/x2apic_cluster.c

218

pr_err("Failed to register X2APIC_PREPARE\n");

arch/x86/kernel/apic/x2apic_savic.c

118

pr_err("Error reading unknown Secure AVIC reg offset 0x%x\n", reg);

arch/x86/kernel/apic/x2apic_savic.c

240

pr_err("Error writing unknown Secure AVIC reg offset 0x%x\n", reg);

arch/x86/kernel/apic/x2apic_savic.c

378

pr_err("Secure AVIC enabled in non x2APIC mode\n");

arch/x86/kernel/apic/x2apic_uv_x.c

1336

pr_err("UV: BIOS UVsystab mismatch, (%x < %x)\n",

arch/x86/kernel/apic/x2apic_uv_x.c

1338

pr_err("UV: Does not support UV, switch to non-UV x86_64\n");

arch/x86/kernel/apic/x2apic_uv_x.c

1367

pr_err("UV:%s:Unrecognized UV_SYSTAB_TYPE:%d, skipped\n",

arch/x86/kernel/apic/x2apic_uv_x.c

1495

pr_err("UV: Error: UVsystab address translations not available!\n");

arch/x86/kernel/apic/x2apic_uv_x.c

1659

pr_err("UV: Unknown/unsupported UV hub\n");

arch/x86/kernel/apic/x2apic_uv_x.c

1671

pr_err("UV: Mangled UVsystab format\n");

arch/x86/kernel/apic/x2apic_uv_x.c

316

pr_err("UV: Cannot access UVsystab, remap failed\n");

arch/x86/kernel/apic/x2apic_uv_x.c

330

pr_err("UV: Cannot access UVarchtype, remap failed\n");

arch/x86/kernel/apic/x2apic_uv_x.c

399

pr_err("UV: NUMA is off, disabling UV support\n");

arch/x86/kernel/apic/x2apic_uv_x.c

569

pr_err("UV: mem_block_size error with 0x%lx\n", mem_block_size);

arch/x86/kernel/apic/x2apic_uv_x.c

605

pr_err("UV: GAM table sockid(%d) too large(>%d) @%d\n", gre->sockid, _max_socket, (int)(gre - uv_gre_table));

arch/x86/kernel/apic/x2apic_uv_x.c

860

pr_err("UV: GRU unavailable (no MMR)\n");

arch/x86/kernel/apic/x2apic_uv_x.c

896

pr_err("UV:%s:RH_GAM_MMR_OVERLAY_CONFIG MMR undefined?\n",

arch/x86/kernel/apic/x2apic_uv_x.c

967

pr_err("UV:%s:Invalid mapping type:%d\n", __func__, index);

arch/x86/kernel/apm_32.c

1164

pr_err("an event queue overflowed\n");

arch/x86/kernel/apm_32.c

1427

pr_err("%s passed bad filp\n", func);

arch/x86/kernel/apm_32.c

1566

pr_err("filp not in user list\n");

arch/x86/kernel/apm_32.c

2323

pr_err("disabled - Unable to start kernel thread\n");

arch/x86/kernel/cet.c

126

pr_err("Missing ENDBR: %pS\n", (void *)instruction_pointer(regs));

arch/x86/kernel/check.c

155

pr_err("Corrupted low memory at %p (%lx phys) = %08lx\n", addr, __pa(addr), *addr);

arch/x86/kernel/check.c

39

pr_err("memory_corruption_check config string not provided\n");

arch/x86/kernel/check.c

59

pr_err("memory_corruption_check_period config string not provided\n");

arch/x86/kernel/check.c

78

pr_err("memory_corruption_check_size config string not provided\n");

arch/x86/kernel/cpu/bugs.c

1208

pr_err("Ignoring unknown retbleed option (%s).", str);

arch/x86/kernel/cpu/bugs.c

1232

pr_err("WARNING: kernel not compiled with MITIGATION_UNRET_ENTRY.\n");

arch/x86/kernel/cpu/bugs.c

1237

pr_err("WARNING: CPU does not support IBPB.\n");

arch/x86/kernel/cpu/bugs.c

1240

pr_err("WARNING: kernel not compiled with MITIGATION_IBPB_ENTRY.\n");

arch/x86/kernel/cpu/bugs.c

1246

pr_err("WARNING: kernel not compiled with MITIGATION_CALL_DEPTH_TRACKING.\n");

arch/x86/kernel/cpu/bugs.c

1249

pr_err("WARNING: retbleed=stuff only supported for Intel CPUs.\n");

arch/x86/kernel/cpu/bugs.c

1301

pr_err("WARNING: retbleed=stuff depends on retpoline\n");

arch/x86/kernel/cpu/bugs.c

1322

pr_err(RETBLEED_INTEL_MSG);

arch/x86/kernel/cpu/bugs.c

1348

pr_err(RETBLEED_UNTRAIN_MSG);

arch/x86/kernel/cpu/bugs.c

1407

pr_err("Mitigation disabled at compile time, ignoring option (%s)", str);

arch/x86/kernel/cpu/bugs.c

1423

pr_err("Ignoring unknown indirect_target_selection option (%s).", str);

arch/x86/kernel/cpu/bugs.c

1449

pr_err("WARNING: ITS mitigation depends on retpoline and rethunk support\n");

arch/x86/kernel/cpu/bugs.c

1455

pr_err("WARNING: ITS mitigation is not compatible with CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B\n");

arch/x86/kernel/cpu/bugs.c

1462

pr_err("RSB stuff mitigation not supported, using default\n");

arch/x86/kernel/cpu/bugs.c

1479

pr_err("WARNING: Spectre-v2 mitigation is off, disabling ITS\n");

arch/x86/kernel/cpu/bugs.c

1490

pr_err("WARNING: ITS mitigation is not compatible with lfence mitigation\n");

arch/x86/kernel/cpu/bugs.c

1563

pr_err("Ignoring unknown tsa=%s option.\n", str);

arch/x86/kernel/cpu/bugs.c

1645

pr_err("System may be vulnerable to spectre v2\n");

arch/x86/kernel/cpu/bugs.c

1673

pr_err(SPECTRE_V2_EIBRS_EBPF_MSG);

arch/x86/kernel/cpu/bugs.c

1677

pr_err(SPECTRE_V2_EIBRS_LFENCE_EBPF_SMT_MSG);

arch/x86/kernel/cpu/bugs.c

1743

pr_err("Ignoring unknown spectre_v2_user option (%s).", str);

arch/x86/kernel/cpu/bugs.c

1936

pr_err("Ignoring unknown spectre_v2 option (%s).", str);

arch/x86/kernel/cpu/bugs.c

1946

pr_err("Kernel not compiled with retpoline; no mitigation available!");

arch/x86/kernel/cpu/bugs.c

2062

pr_err("Ignoring unknown spectre_bhi option (%s)", str);

arch/x86/kernel/cpu/bugs.c

2131

pr_err("RETPOLINE selected but not compiled in. Switching to AUTO select\n");

arch/x86/kernel/cpu/bugs.c

2139

pr_err("EIBRS selected but CPU doesn't have Enhanced or Automatic IBRS. Switching to AUTO select\n");

arch/x86/kernel/cpu/bugs.c

2146

pr_err("LFENCE selected, but CPU doesn't have a serializing LFENCE. Switching to AUTO select\n");

arch/x86/kernel/cpu/bugs.c

2151

pr_err("IBRS selected but not compiled in. Switching to AUTO select\n");

arch/x86/kernel/cpu/bugs.c

2156

pr_err("IBRS selected but not Intel CPU. Switching to AUTO select\n");

arch/x86/kernel/cpu/bugs.c

2161

pr_err("IBRS selected but CPU doesn't have IBRS. Switching to AUTO select\n");

arch/x86/kernel/cpu/bugs.c

2166

pr_err("IBRS selected but running as XenPV guest. Switching to AUTO select\n");

arch/x86/kernel/cpu/bugs.c

2193

pr_err(SPECTRE_V2_LFENCE_MSG);

arch/x86/kernel/cpu/bugs.c

2244

pr_err(SPECTRE_V2_EIBRS_EBPF_MSG);

arch/x86/kernel/cpu/bugs.c

2419

pr_err("Ignoring unknown spec_store_bypass_disable option (%s).\n",

arch/x86/kernel/cpu/bugs.c

2888

pr_err("Ignoring unknown SRSO option (%s).", str);

arch/x86/kernel/cpu/bugs.c

2952

pr_err("WARNING: kernel not compiled with MITIGATION_SRSO.\n");

arch/x86/kernel/cpu/bugs.c

2966

pr_err("WARNING: kernel not compiled with MITIGATION_IBPB_ENTRY.\n");

arch/x86/kernel/cpu/bugs.c

3078

pr_err("Ignoring unknown vmscape=%s option.\n", str);

arch/x86/kernel/cpu/common.c

1741

pr_err("Option 'no387' required CONFIG_MATH_EMULATION enabled.\n");

arch/x86/kernel/cpu/common.c

657

pr_err("IBT selftest: Failed!\n");

arch/x86/kernel/cpu/mce/amd.c

271

pr_err("Unexpected deferred interrupt at vector %x\n", DEFERRED_ERROR_VECTOR);

arch/x86/kernel/cpu/mce/amd.c

413

pr_err(FW_BUG "cpu %d, failed to setup threshold interrupt "

arch/x86/kernel/cpu/mce/amd.c

420

pr_err(FW_BUG "cpu %d, invalid threshold interrupt offset %d "

arch/x86/kernel/cpu/mce/core.c

1450

pr_err("Uncorrected hardware memory error in user-access at %llx", p->mce_addr);

arch/x86/kernel/cpu/mce/core.c

1473

pr_err("Memory error not recovered");

arch/x86/kernel/cpu/mce/core.c

1483

pr_err("Kernel accessed poison in user space at %llx\n", p->mce_addr);

arch/x86/kernel/cpu/mce/core.c

1523

pr_err("CPU#%d: Unexpected int18 (Machine Check)\n",

arch/x86/kernel/cpu/mce/core.c

1748

pr_err("Uncorrected memory error in page 0x%lx ignored\n"

arch/x86/kernel/cpu/mce/core.c

2891

pr_err("Unable to init MCE device (rc: %d)\n", err);

arch/x86/kernel/cpu/mce/dev-mcelog.c

356

pr_err("Unable to init device /dev/mcelog (rc: %d)\n", err);

arch/x86/kernel/cpu/mce/inject.c

278

pr_err("Timeout waiting for mce inject %lx\n",

arch/x86/kernel/cpu/mce/inject.c

324

pr_err("%s: error reading HWCR\n", __func__);

arch/x86/kernel/cpu/mce/inject.c

332

pr_err("%s: error writing HWCR\n", __func__);

arch/x86/kernel/cpu/mce/inject.c

382

pr_err("%s: Invalid flags value: %s\n", __func__, __buf);

arch/x86/kernel/cpu/mce/inject.c

407

pr_err("%s: Invalid CPU: %llu\n", __func__, val);

arch/x86/kernel/cpu/mce/inject.c

456

pr_err("%s: Error reading F%dx%03x.\n",

arch/x86/kernel/cpu/mce/inject.c

464

pr_err("%s: Set D18F3x44[NbMcaToMstCpuEn] which BIOS hasn't done.\n",

arch/x86/kernel/cpu/mce/inject.c

470

pr_err("%s: Error writing F%dx%03x.\n",

arch/x86/kernel/cpu/mce/inject.c

597

pr_err("MCA bank %llu non-existent on CPU%d\n", val, m->extcpu);

arch/x86/kernel/cpu/mce/inject.c

618

pr_err("Error reading IPID on CPU%d\n", m->extcpu);

arch/x86/kernel/cpu/mce/inject.c

623

pr_err("Cannot inject into unpopulated bank %llu\n", val);

arch/x86/kernel/cpu/mce/threshold.c

31

pr_err("Unexpected threshold interrupt at vector %x\n",

arch/x86/kernel/cpu/microcode/amd.c

1043

pr_err("failed to allocate equivalent CPU table\n");

arch/x86/kernel/cpu/microcode/amd.c

1091

pr_err("Patch allocation failure.\n");

arch/x86/kernel/cpu/microcode/amd.c

1097

pr_err("Patch data allocation failure.\n");

arch/x86/kernel/cpu/microcode/amd.c

1133

pr_err("invalid type field in container file section header\n");

arch/x86/kernel/cpu/microcode/amd.c

285

pr_err("No sha256 digest for patch ID: 0x%x found\n", patch_id);

arch/x86/kernel/cpu/microcode/amd.c

292

pr_err("Patch 0x%x SHA256 digest mismatch!\n", patch_id);

arch/x86/kernel/cpu/microcode/amd.c

541

pr_err("Patch-ID 0x%08x: chipset-specific code unsupported.\n", mc_hdr->patch_id);

arch/x86/kernel/cpu/microcode/amd.c

999

pr_err("CPU%d: update failed for patch_level=0x%08x\n",

arch/x86/kernel/cpu/microcode/core.c

596

pr_err("Late microcode loading without minimal revision check.\n");

arch/x86/kernel/cpu/microcode/core.c

597

pr_err("You should switch to early loading, if possible.\n");

arch/x86/kernel/cpu/microcode/core.c

654

pr_err("update failed: %u CPUs failed %u CPUs timed out\n",

arch/x86/kernel/cpu/microcode/core.c

664

pr_err("load incomplete. %u CPUs timed out or failed\n",

arch/x86/kernel/cpu/microcode/core.c

726

pr_err("CPU %u not online, loading aborted\n", cpu);

arch/x86/kernel/cpu/microcode/core.c

860

pr_err("Failed to create group for CPU%d\n", cpu);

arch/x86/kernel/cpu/microcode/core.c

899

pr_err("no support for this CPU vendor\n");

arch/x86/kernel/cpu/microcode/core.c

918

pr_err("Error creating microcode group!\n");

arch/x86/kernel/cpu/microcode/intel.c

1004

pr_err("Intel CPU family 0x%x not supported\n", c->x86);

arch/x86/kernel/cpu/microcode/intel.c

202

pr_err("Error: bad microcode data file size.\n");

arch/x86/kernel/cpu/microcode/intel.c

208

pr_err("Error: invalid/unknown microcode update format. Header type %d\n",

arch/x86/kernel/cpu/microcode/intel.c

221

pr_err("Error: truncated extended signature table.\n");

arch/x86/kernel/cpu/microcode/intel.c

228

pr_err("Error: extended signature table size mismatch.\n");

arch/x86/kernel/cpu/microcode/intel.c

263

pr_err("Bad microcode data checksum, aborting.\n");

arch/x86/kernel/cpu/microcode/intel.c

281

pr_err("Bad extended signature checksum, aborting.\n");

arch/x86/kernel/cpu/microcode/intel.c

309

pr_err("Unable to allocate microcode memory size: %u\n", size);

arch/x86/kernel/cpu/microcode/intel.c

613

pr_err("Microcode image 32-bit misaligned (0x%x), staging failed.\n",

arch/x86/kernel/cpu/microcode/intel.c

637

pr_err("Error: staging failed (%d) for CPU%d at package %u.\n",

arch/x86/kernel/cpu/microcode/intel.c

845

pr_err("error! Truncated or inaccessible header in microcode data file\n");

arch/x86/kernel/cpu/microcode/intel.c

851

pr_err("error! Bad data in microcode data file (totalsize too small)\n");

arch/x86/kernel/cpu/microcode/intel.c

856

pr_err("error! Bad data in microcode data file (truncated file?)\n");

arch/x86/kernel/cpu/mshyperv.c

471

pr_err("%s: Could not detect Hyper-V version\n", __func__);

arch/x86/kernel/cpu/mtrr/generic.c

117

pr_err(FW_WARN "MTRR: CPU %u: SYSCFG[MtrrFixDramModEn]"

arch/x86/kernel/cpu/mtrr/generic.c

420

pr_err("MTRRs disabled due to allocation failure for lookup map.\n");

arch/x86/kernel/cpu/mtrr/generic.c

754

pr_err("MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",

arch/x86/kernel/cpu/sgx/main.c

788

pr_err("sysfs update failed (%d), files may be invisible", ret);

arch/x86/kernel/cpu/sgx/main.c

823

pr_err("No free memory for an EPC section\n");

arch/x86/kernel/cpu/sgx/main.c

852

pr_err("There are zero EPC sections.\n");

arch/x86/kernel/cpu/topology_common.c

213

pr_err(FW_BUG "CPU%4u: APIC ID mismatch. CPUID: 0x%04x APIC: 0x%04x\n",

arch/x86/kernel/cpu/topology_common.c

218

pr_err(FW_BUG "CPU%4u: APIC ID mismatch. Firmware: 0x%04x APIC: 0x%04x\n",

arch/x86/kernel/cpu/topology_common.c

226

pr_err(FW_BUG "CPU%d: Topology domain %u shift %u != %u\n", cpu, dom,

arch/x86/kernel/cpu/tsx.c

182

pr_err("invalid option, defaulting to off\n");

arch/x86/kernel/cpu/vmware.c

366

pr_err("vmware_guest: Failed to install cpu hotplug callbacks\n");

arch/x86/kernel/crash.c

448

pr_err("number of Phdrs %lu exceeds max\n", pnum);

arch/x86/kernel/crash.c

533

pr_err("unable to create new elfcorehdr");

arch/x86/kernel/crash.c

544

pr_err("update elfcorehdr elfsz %lu > memsz %lu",

arch/x86/kernel/crash.c

554

pr_err("mapping elfcorehdr segment failed\n");

arch/x86/kernel/devicetree.c

251

pr_err("Can't obtain address from device node %pOF.\n", dn);

arch/x86/kernel/devicetree.c

268

pr_err("Error: No information about IO-APIC in OF.\n");

arch/x86/kernel/e820.c

171

pr_err("E820 table full; ignoring [mem %#010llx-%#010llx]\n",

arch/x86/kernel/e820.c

696

pr_err("Cannot find an available gap in the 32-bit address range\n");

arch/x86/kernel/e820.c

697

pr_err("PCI devices with unassigned 32-bit BARs may not work!\n");

arch/x86/kernel/early-quirks.c

654

pr_err("pci 0000:%02x:%02x.%d: Cannot power up Apple AirPort card\n",

arch/x86/kernel/early-quirks.c

666

pr_err("pci 0000:%02x:%02x.%d: Cannot iomap Apple AirPort card\n",

arch/x86/kernel/fpu/xstate.c

531

pr_err("%s: struct is %zu bytes, cpu xtile %d bytes\n",

arch/x86/kernel/fpu/xstate.c

544

pr_err("%s: calculated size is %u bytes, cpu state %d bytes\n",

arch/x86/kernel/fpu/xstate.c

842

pr_err("x86/fpu: FP/SSE not present amongst the CPU's xstate features: 0x%llx.\n",

arch/x86/kernel/fpu/xstate.c

853

pr_err("x86/fpu: Both APX/MPX present in the CPU's xstate features: 0x%llx.\n",

arch/x86/kernel/fpu/xstate.c

945

pr_err("x86/fpu: xfeatures modified from 0x%016llx to 0x%016llx during init\n",

arch/x86/kernel/irq.c

51

pr_err("unexpected IRQ trap at vector %02x\n", irq);

arch/x86/kernel/irq.c

573

pr_err("CPU%d: Unexpected LVT thermal interrupt!\n",

arch/x86/kernel/irqinit.c

112

pr_err("%s: request_irq() failed\n", "cascade");

arch/x86/kernel/kexec-bzimage64.c

419

pr_err("File is too short to be a bzImage\n");

arch/x86/kernel/kexec-bzimage64.c

425

pr_err("Not a bzImage\n");

arch/x86/kernel/kexec-bzimage64.c

430

pr_err("No x86 boot sector present\n");

arch/x86/kernel/kexec-bzimage64.c

435

pr_err("Must be at least protocol version 2.12\n");

arch/x86/kernel/kexec-bzimage64.c

440

pr_err("zImage not a bzImage\n");

arch/x86/kernel/kexec-bzimage64.c

445

pr_err("Not a bzImage64. XLF_KERNEL_64 is not set.\n");

arch/x86/kernel/kexec-bzimage64.c

450

pr_err("XLF_CAN_BE_LOADED_ABOVE_4G is not set.\n");

arch/x86/kernel/kexec-bzimage64.c

464

pr_err("bzImage cannot handle 5-level paging mode.\n");

arch/x86/kernel/kexec-bzimage64.c

503

pr_err("bzImage truncated\n");

arch/x86/kernel/kexec-bzimage64.c

508

pr_err("Kernel command line too long\n");

arch/x86/kernel/kexec-bzimage64.c

517

pr_err("Appending elfcorehdr=<addr> to command line exceeds maximum allowed length\n");

arch/x86/kernel/kexec-bzimage64.c

531

pr_err("Failed to load dm crypt keys\n");

arch/x86/kernel/kexec-bzimage64.c

537

pr_err("Appending dmcryptkeys=<addr> to command line exceeds maximum allowed length\n");

arch/x86/kernel/kexec-bzimage64.c

549

pr_err("Loading purgatory failed\n");

arch/x86/kernel/kexec-bzimage64.c

667

pr_err("Could not find address of symbol stack_end\n");

arch/x86/kernel/kprobes/core.c

444

pr_err("Kprobes error: new displacement does not fit into s32 (%llx)\n", newdisp);

arch/x86/kernel/kprobes/core.c

955

pr_err("Unrecoverable kprobe detected.\n");

arch/x86/kernel/kvm.c

872

pr_err("failed to install cpu hotplug callbacks\n");

arch/x86/kernel/machine_kexec_64.c

128

pr_err("Could not map UEFI system table\n");

arch/x86/kernel/machine_kexec_64.c

560

pr_err("Undefined symbol: %s\n", name);

arch/x86/kernel/machine_kexec_64.c

565

pr_err("symbol '%s' in common section\n", name);

arch/x86/kernel/machine_kexec_64.c

572

pr_err("Invalid section %d for symbol %s\n",

arch/x86/kernel/machine_kexec_64.c

604

pr_err("Unknown rela relocation: %llu\n",

arch/x86/kernel/machine_kexec_64.c

612

pr_err("Overflow in relocation type %d value 0x%lx\n",

arch/x86/kernel/module.c

141

pr_err("%s: Unsupported GOTPCREL relocation\n", me->name);

arch/x86/kernel/module.c

159

pr_err("%s: Unknown rela relocation: %llu\n",

arch/x86/kernel/module.c

166

pr_err("x86/modules: Invalid relocation target, existing value is nonzero for sec %u, idx %u, type %d, loc %lx, val %llx\n",

arch/x86/kernel/module.c

185

pr_err("overflow in relocation type %d val %llx sec %u idx %d\n",

arch/x86/kernel/module.c

187

pr_err("`%s' likely not compiled with -mcmodel=kernel\n",

arch/x86/kernel/module.c

74

pr_err("%s: Unknown relocation: %u\n",

arch/x86/kernel/mpparse.c

144

pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",

arch/x86/kernel/mpparse.c

150

pr_err("MPTABLE: checksum error!\n");

arch/x86/kernel/mpparse.c

154

pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);

arch/x86/kernel/mpparse.c

158

pr_err("MPTABLE: null local APIC address!\n");

arch/x86/kernel/mpparse.c

183

pr_err("Your mptable is wrong, contact your HW vendor!\n");

arch/x86/kernel/mpparse.c

241

pr_err("MPTABLE: no processors registered!\n");

arch/x86/kernel/mpparse.c

281

pr_err("ELCR contains invalid data... not using ELCR\n");

arch/x86/kernel/mpparse.c

335

pr_err("???\nUnknown standard configuration %d\n",

arch/x86/kernel/mpparse.c

441

pr_err("BIOS bug, MP table errors detected!...\n");

arch/x86/kernel/mpparse.c

460

pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");

arch/x86/kernel/mpparse.c

499

pr_err("MPTABLE: error mapping MP table\n");

arch/x86/kernel/mpparse.c

851

pr_err("MPTABLE: mpf early_memremap() failed\n");

arch/x86/kernel/mpparse.c

867

pr_err("MPTABLE: mpc early_memremap() failed\n");

arch/x86/kernel/mpparse.c

898

pr_err("MPTABLE: new mpc early_memremap() failed\n");

arch/x86/kernel/mpparse.c

912

pr_err("MPTABLE: new mpf early_memremap() failed\n");

arch/x86/kernel/msr.c

267

pr_err("unable to get major %d for msr\n", MSR_MAJOR);

arch/x86/kernel/rtc.c

70

pr_err("Unable to read current time from RTC\n");

arch/x86/kernel/smpboot.c

1074

pr_err("CPU %u has invalid APIC ID %x. Aborting bringup\n", cpu, apicid);

arch/x86/kernel/smpboot.c

1079

pr_err("CPU %u APIC ID %x is not present. Aborting bringup\n", cpu, apicid);

arch/x86/kernel/smpboot.c

1098

pr_err("do_boot_cpu failed(%d) to wakeup CPU#%u\n", err, cpu);

arch/x86/kernel/smpboot.c

624

pr_err(FW_BUG "SLIT table doesn't have the expected form for SNC -- fixup disabled!\n");

arch/x86/kernel/smpboot.c

925

pr_err("APIC never delivered???\n");

arch/x86/kernel/smpboot.c

927

pr_err("APIC delivery error (%lx)\n", accept_status);

arch/x86/kernel/static_call.c

127

pr_err("trampoline signature fail");

arch/x86/kernel/static_call.c

147

pr_err("unexpected static_call insn opcode 0x%x at %pS\n", opcode, insn);

arch/x86/kernel/traps.c

821

pr_err("%s[%d] attempts to use CLI/STI, pretending it's a NOP, ip:%lx",

arch/x86/kernel/tsc_msr.c

211

pr_err("Error MSR_FSB_FREQ index %d is unknown\n", index);

arch/x86/kernel/uprobes.c

1777

pr_err("return address clobbered: pid=%d, %%sp=%#lx, %%ip=%#lx\n",

arch/x86/kvm/mmu/mmu.c

4432

pr_err("%s: reserved bits set on MMU-present spte, addr 0x%llx, hierarchy:\n",

arch/x86/kvm/mmu/mmu.c

4435

pr_err("------ spte = 0x%llx level = %d, rsvd bits = 0x%llx",

arch/x86/kvm/mmu/mmu.c

6480

pr_err("%s %llx", msg, gpa);

arch/x86/kvm/mmu/tdp_mmu.c

590

pr_err("Invalid SPTE change: cannot replace a present leaf\n"

arch/x86/kvm/mmu/tdp_mmu.c

626

pr_err("Unexpected SPTE change! Nonpresent SPTEs\n"

arch/x86/kvm/svm/sev.c

148

pr_err("SEV%s: DF_FLUSH failed, ret=%d, error=%#x\n",

arch/x86/kvm/svm/sev.c

2988

pr_err("SEV: SNP_PLATFORM_STATUS failed ret=%d, fw_error=%d (%#x)\n",

arch/x86/kvm/svm/sev.c

3304

pr_err("GHCB (GPA=%016llx) snapshot:\n", svm->vmcb->control.ghcb_gpa);

arch/x86/kvm/svm/sev.c

3305

pr_err("%-20s%016llx is_valid: %u\n", "sw_exit_code",

arch/x86/kvm/svm/sev.c

3307

pr_err("%-20s%016llx is_valid: %u\n", "sw_exit_info_1",

arch/x86/kvm/svm/sev.c

3309

pr_err("%-20s%016llx is_valid: %u\n", "sw_exit_info_2",

arch/x86/kvm/svm/sev.c

3311

pr_err("%-20s%016llx is_valid: %u\n", "sw_scratch",

arch/x86/kvm/svm/sev.c

3313

pr_err("%-20s%*pb\n", "valid_bitmap", nbits, svm->sev_es.valid_bitmap);

arch/x86/kvm/svm/sev.c

3611

pr_err("vmgexit: scratch gpa not provided\n");

arch/x86/kvm/svm/sev.c

3617

pr_err("vmgexit: scratch length (%#llx) not valid for scratch address (%#llx)\n",

arch/x86/kvm/svm/sev.c

3635

pr_err("vmgexit: scratch area is outside of GHCB shared buffer area (%#llx - %#llx)\n",

arch/x86/kvm/svm/sev.c

3648

pr_err("vmgexit: scratch area exceeds KVM limits (%#llx requested, %#llx limit)\n",

arch/x86/kvm/svm/sev.c

3658

pr_err("vmgexit: kvm_read_guest for scratch area failed\n");

arch/x86/kvm/svm/sev.c

4479

pr_err("svm: vmgexit: unsupported AP jump table request - exit_info_1=%#llx\n",

arch/x86/kvm/svm/sev.c

5163

pr_err("SEV: SNP_DBG_DECRYPT failed ret=%d, fw_error=%d (%#x)\n",

arch/x86/kvm/svm/sev.c

5186

pr_err("SEV: SEV_CMD_DBG_DECRYPT failed ret=%d, fw_error=%d (0x%x)\n",

arch/x86/kvm/svm/sev.c

701

pr_err("SEV: %lu locked pages exceed the lock limit of %lu.\n", locked, lock_limit);

arch/x86/kvm/svm/sev.c

721

pr_err("SEV: Failure locking %lu pages.\n", npages);

arch/x86/kvm/svm/svm.c

2062

pr_err("Guest triggered AMD Erratum 383\n");

arch/x86/kvm/svm/svm.c

3329

pr_err("%s vCPU%u VMCB %p, last attempted VMRUN on CPU %d\n",

arch/x86/kvm/svm/svm.c

3331

pr_err("VMCB Control Area:\n");

arch/x86/kvm/svm/svm.c

3332

pr_err("%-20s%04x\n", "cr_read:", control->intercepts[INTERCEPT_CR] & 0xffff);

arch/x86/kvm/svm/svm.c

3333

pr_err("%-20s%04x\n", "cr_write:", control->intercepts[INTERCEPT_CR] >> 16);

arch/x86/kvm/svm/svm.c

3334

pr_err("%-20s%04x\n", "dr_read:", control->intercepts[INTERCEPT_DR] & 0xffff);

arch/x86/kvm/svm/svm.c

3335

pr_err("%-20s%04x\n", "dr_write:", control->intercepts[INTERCEPT_DR] >> 16);

arch/x86/kvm/svm/svm.c

3336

pr_err("%-20s%08x\n", "exceptions:", control->intercepts[INTERCEPT_EXCEPTION]);

arch/x86/kvm/svm/svm.c

3337

pr_err("%-20s%08x %08x\n", "intercepts:",

arch/x86/kvm/svm/svm.c

3340

pr_err("%-20s%d\n", "pause filter count:", control->pause_filter_count);

arch/x86/kvm/svm/svm.c

3341

pr_err("%-20s%d\n", "pause filter threshold:",

arch/x86/kvm/svm/svm.c

3343

pr_err("%-20s%016llx\n", "iopm_base_pa:", control->iopm_base_pa);

arch/x86/kvm/svm/svm.c

3344

pr_err("%-20s%016llx\n", "msrpm_base_pa:", control->msrpm_base_pa);

arch/x86/kvm/svm/svm.c

3345

pr_err("%-20s%016llx\n", "tsc_offset:", control->tsc_offset);

arch/x86/kvm/svm/svm.c

3346

pr_err("%-20s%d\n", "asid:", control->asid);

arch/x86/kvm/svm/svm.c

3347

pr_err("%-20s%d\n", "tlb_ctl:", control->tlb_ctl);

arch/x86/kvm/svm/svm.c

3348

pr_err("%-20s%d\n", "erap_ctl:", control->erap_ctl);

arch/x86/kvm/svm/svm.c

3349

pr_err("%-20s%08x\n", "int_ctl:", control->int_ctl);

arch/x86/kvm/svm/svm.c

3350

pr_err("%-20s%08x\n", "int_vector:", control->int_vector);

arch/x86/kvm/svm/svm.c

3351

pr_err("%-20s%08x\n", "int_state:", control->int_state);

arch/x86/kvm/svm/svm.c

3352

pr_err("%-20s%016llx\n", "exit_code:", control->exit_code);

arch/x86/kvm/svm/svm.c

3353

pr_err("%-20s%016llx\n", "exit_info1:", control->exit_info_1);

arch/x86/kvm/svm/svm.c

3354

pr_err("%-20s%016llx\n", "exit_info2:", control->exit_info_2);

arch/x86/kvm/svm/svm.c

3355

pr_err("%-20s%08x\n", "exit_int_info:", control->exit_int_info);

arch/x86/kvm/svm/svm.c

3356

pr_err("%-20s%08x\n", "exit_int_info_err:", control->exit_int_info_err);

arch/x86/kvm/svm/svm.c

3357

pr_err("%-20s%lld\n", "nested_ctl:", control->nested_ctl);

arch/x86/kvm/svm/svm.c

3358

pr_err("%-20s%016llx\n", "nested_cr3:", control->nested_cr3);

arch/x86/kvm/svm/svm.c

3359

pr_err("%-20s%016llx\n", "avic_vapic_bar:", control->avic_vapic_bar);

arch/x86/kvm/svm/svm.c

3360

pr_err("%-20s%016llx\n", "ghcb:", control->ghcb_gpa);

arch/x86/kvm/svm/svm.c

3361

pr_err("%-20s%08x\n", "event_inj:", control->event_inj);

arch/x86/kvm/svm/svm.c

3362

pr_err("%-20s%08x\n", "event_inj_err:", control->event_inj_err);

arch/x86/kvm/svm/svm.c

3363

pr_err("%-20s%lld\n", "virt_ext:", control->virt_ext);

arch/x86/kvm/svm/svm.c

3364

pr_err("%-20s%016llx\n", "next_rip:", control->next_rip);

arch/x86/kvm/svm/svm.c

3365

pr_err("%-20s%016llx\n", "avic_backing_page:", control->avic_backing_page);

arch/x86/kvm/svm/svm.c

3366

pr_err("%-20s%016llx\n", "avic_logical_id:", control->avic_logical_id);

arch/x86/kvm/svm/svm.c

3367

pr_err("%-20s%016llx\n", "avic_physical_id:", control->avic_physical_id);

arch/x86/kvm/svm/svm.c

3368

pr_err("%-20s%016llx\n", "vmsa_pa:", control->vmsa_pa);

arch/x86/kvm/svm/svm.c

3369

pr_err("%-20s%016llx\n", "allowed_sev_features:", control->allowed_sev_features);

arch/x86/kvm/svm/svm.c

3370

pr_err("%-20s%016llx\n", "guest_sev_features:", control->guest_sev_features);

arch/x86/kvm/svm/svm.c

3380

pr_err("VMCB State Save Area:\n");

arch/x86/kvm/svm/svm.c

3381

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3385

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3389

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3393

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3397

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3401

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3405

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3409

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3413

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3417

pr_err("%-5s s: %04x a: %04x l: %08x b: %016llx\n",

arch/x86/kvm/svm/svm.c

3421

pr_err("vmpl: %d cpl: %d efer: %016llx\n",

arch/x86/kvm/svm/svm.c

3423

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3425

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3427

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3429

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3431

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3433

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3435

pr_err("%-15s %016llx\n",

arch/x86/kvm/svm/svm.c

3437

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3439

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3441

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3444

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3447

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3449

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3451

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3458

pr_err("%-15s %016llx\n",

arch/x86/kvm/svm/svm.c

3461

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3463

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3465

pr_err("%-15s %016llx\n",

arch/x86/kvm/svm/svm.c

3468

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3470

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3472

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3474

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3476

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3478

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3480

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3482

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3484

pr_err("%-15s %016llx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3487

pr_err("%-15s %016llx %-13s %016lx\n",

arch/x86/kvm/svm/svm.c

3490

pr_err("%-15s %016lx %-13s %016lx\n",

arch/x86/kvm/svm/svm.c

3493

pr_err("%-15s %016lx %-13s %016lx\n",

arch/x86/kvm/svm/svm.c

3496

pr_err("%-15s %016lx %-13s %016llx\n",

arch/x86/kvm/svm/svm.c

3500

pr_err("%-15s %016lx %-13s %016lx\n",

arch/x86/kvm/svm/svm.c

3503

pr_err("%-15s %016lx %-13s %016lx\n",

arch/x86/kvm/svm/svm.c

3506

pr_err("%-15s %016lx %-13s %016lx\n",

arch/x86/kvm/svm/svm.c

3509

pr_err("%-15s %016lx %-13s %016lx\n",

arch/x86/kvm/svm/svm.c

430

pr_err("CPU %d isn't AMD or Hygon\n", cpu);

arch/x86/kvm/svm/svm.c

435

pr_err("SVM not supported by CPU %d\n", cpu);

arch/x86/kvm/vmx/nested.c

110

pr_err("Missing field from shadow_read_write_field %x\n",

arch/x86/kvm/vmx/nested.c

86

pr_err("Missing field from shadow_read_only_field %x\n",

arch/x86/kvm/vmx/tdx.c

3402

pr_err("MSR %x isn't included by kvm_find_user_return_msr\n",

arch/x86/kvm/vmx/tdx.c

3468

pr_err("Disable TDX: MAX_VCPU_PER_TD (%u) smaller than number of logical CPUs (%u).\n",

arch/x86/kvm/vmx/tdx.c

3510

pr_err("EPT is required for TDX\n");

arch/x86/kvm/vmx/tdx.c

3515

pr_err("TDP MMU and MMIO caching and EPT A/D bit is required for TDX\n");

arch/x86/kvm/vmx/tdx.c

3520

pr_err("APICv is required for TDX\n");

arch/x86/kvm/vmx/tdx.c

3525

pr_err("tdx: OSXSAVE is required for TDX\n");

arch/x86/kvm/vmx/tdx.c

3530

pr_err("tdx: MOVDIR64B is required for TDX\n");

arch/x86/kvm/vmx/tdx.c

3535

pr_err("Self-snoop is required for TDX\n");

arch/x86/kvm/vmx/tdx.c

3540

pr_err("tdx: no TDX private KeyIDs available\n");

arch/x86/kvm/vmx/tdx.c

3545

pr_err("tdx: tdx requires kvm.enable_virt_at_load=1\n");

arch/x86/kvm/vmx/tdx.c

528

pr_err("tdh_mng_vpflushdone() failed. HKID %d is leaked.\n",

arch/x86/kvm/vmx/tdx.c

551

pr_err("tdh_mng_key_freeid() failed. HKID %d is leaked.\n",

arch/x86/kvm/vmx/tdx.c

68

pr_err("TDH_VP_RD[%s.0x%x] failed 0x%llx\n", uclass, field, err);

arch/x86/kvm/vmx/tdx.c

75

pr_err("TDH_VP_WR[%s.0x%x]%s0x%llx failed: 0x%llx\n", uclass, field, op, val, err);

arch/x86/kvm/vmx/tdx.h

89

pr_err("TDH_MNG_RD[EXEC.0x%x] failed: 0x%llx\n", field, err);

arch/x86/kvm/vmx/vmx.c

2926

pr_err("VMX not supported by CPU %d\n", cpu);

arch/x86/kvm/vmx/vmx.c

2932

pr_err("VMX not enabled (by BIOS) in MSR_IA32_FEAT_CTL on CPU %d\n", cpu);

arch/x86/kvm/vmx/vmx.c

2960

pr_err("Failed to setup VMCS config on CPU %d\n", cpu);

arch/x86/kvm/vmx/vmx.c

2973

pr_err("VMCS config on CPU %d doesn't match reference config:", cpu);

arch/x86/kvm/vmx/vmx.c

6552

pr_err("%s sel=0x%04x, attr=0x%05x, limit=0x%08x, base=0x%016lx\n",

arch/x86/kvm/vmx/vmx.c

6561

pr_err("%s limit=0x%08x, base=0x%016lx\n",

arch/x86/kvm/vmx/vmx.c

6571

pr_err("MSR %s:\n", name);

arch/x86/kvm/vmx/vmx.c

6573

pr_err(" %2d: msr=0x%08x value=0x%016llx\n", i, e->index, e->value);

arch/x86/kvm/vmx/vmx.c

6606

pr_err("VMCS %p, last attempted VM-entry on CPU %d\n",

arch/x86/kvm/vmx/vmx.c

6608

pr_err("*** Guest State ***\n");

arch/x86/kvm/vmx/vmx.c

6609

pr_err("CR0: actual=0x%016lx, shadow=0x%016lx, gh_mask=%016lx\n",

arch/x86/kvm/vmx/vmx.c

6612

pr_err("CR4: actual=0x%016lx, shadow=0x%016lx, gh_mask=%016lx\n",

arch/x86/kvm/vmx/vmx.c

6614

pr_err("CR3 = 0x%016lx\n", vmcs_readl(GUEST_CR3));

arch/x86/kvm/vmx/vmx.c

6616

pr_err("PDPTR0 = 0x%016llx PDPTR1 = 0x%016llx\n",

arch/x86/kvm/vmx/vmx.c

6618

pr_err("PDPTR2 = 0x%016llx PDPTR3 = 0x%016llx\n",

arch/x86/kvm/vmx/vmx.c

6621

pr_err("RSP = 0x%016lx RIP = 0x%016lx\n",

arch/x86/kvm/vmx/vmx.c

6623

pr_err("RFLAGS=0x%08lx DR7 = 0x%016lx\n",

arch/x86/kvm/vmx/vmx.c

6625

pr_err("Sysenter RSP=%016lx CS:RIP=%04x:%016lx\n",

arch/x86/kvm/vmx/vmx.c

6640

pr_err("EFER= 0x%016llx\n", vmcs_read64(GUEST_IA32_EFER));

arch/x86/kvm/vmx/vmx.c

6642

pr_err("EFER= 0x%016llx (autoload)\n",

arch/x86/kvm/vmx/vmx.c

6645

pr_err("EFER= 0x%016llx (effective)\n",

arch/x86/kvm/vmx/vmx.c

6648

pr_err("EFER= 0x%016llx (effective)\n",

arch/x86/kvm/vmx/vmx.c

6651

pr_err("PAT = 0x%016llx\n", vmcs_read64(GUEST_IA32_PAT));

arch/x86/kvm/vmx/vmx.c

6652

pr_err("DebugCtl = 0x%016llx DebugExceptions = 0x%016lx\n",

arch/x86/kvm/vmx/vmx.c

6657

pr_err("PerfGlobCtl = 0x%016llx\n",

arch/x86/kvm/vmx/vmx.c

6660

pr_err("BndCfgS = 0x%016llx\n", vmcs_read64(GUEST_BNDCFGS));

arch/x86/kvm/vmx/vmx.c

6661

pr_err("Interruptibility = %08x ActivityState = %08x\n",

arch/x86/kvm/vmx/vmx.c

6665

pr_err("InterruptStatus = %04x\n",

arch/x86/kvm/vmx/vmx.c

6673

pr_err("S_CET = 0x%016lx, SSP = 0x%016lx, SSP TABLE = 0x%016lx\n",

arch/x86/kvm/vmx/vmx.c

6676

pr_err("*** Host State ***\n");

arch/x86/kvm/vmx/vmx.c

6677

pr_err("RIP = 0x%016lx RSP = 0x%016lx\n",

arch/x86/kvm/vmx/vmx.c

6679

pr_err("CS=%04x SS=%04x DS=%04x ES=%04x FS=%04x GS=%04x TR=%04x\n",

arch/x86/kvm/vmx/vmx.c

6684

pr_err("FSBase=%016lx GSBase=%016lx TRBase=%016lx\n",

arch/x86/kvm/vmx/vmx.c

6687

pr_err("GDTBase=%016lx IDTBase=%016lx\n",

arch/x86/kvm/vmx/vmx.c

6689

pr_err("CR0=%016lx CR3=%016lx CR4=%016lx\n",

arch/x86/kvm/vmx/vmx.c

6692

pr_err("Sysenter RSP=%016lx CS:RIP=%04x:%016lx\n",

arch/x86/kvm/vmx/vmx.c

6697

pr_err("EFER= 0x%016llx\n", vmcs_read64(HOST_IA32_EFER));

arch/x86/kvm/vmx/vmx.c

6699

pr_err("PAT = 0x%016llx\n", vmcs_read64(HOST_IA32_PAT));

arch/x86/kvm/vmx/vmx.c

6702

pr_err("PerfGlobCtl = 0x%016llx\n",

arch/x86/kvm/vmx/vmx.c

6707

pr_err("S_CET = 0x%016lx, SSP = 0x%016lx, SSP TABLE = 0x%016lx\n",

arch/x86/kvm/vmx/vmx.c

6711

pr_err("*** Control State ***\n");

arch/x86/kvm/vmx/vmx.c

6712

pr_err("CPUBased=0x%08x SecondaryExec=0x%08x TertiaryExec=0x%016llx\n",

arch/x86/kvm/vmx/vmx.c

6714

pr_err("PinBased=0x%08x EntryControls=%08x ExitControls=%08x\n",

arch/x86/kvm/vmx/vmx.c

6716

pr_err("ExceptionBitmap=%08x PFECmask=%08x PFECmatch=%08x\n",

arch/x86/kvm/vmx/vmx.c

6720

pr_err("VMEntry: intr_info=%08x errcode=%08x ilen=%08x\n",

arch/x86/kvm/vmx/vmx.c

6724

pr_err("VMExit: intr_info=%08x errcode=%08x ilen=%08x\n",

arch/x86/kvm/vmx/vmx.c

6728

pr_err(" reason=%08x qualification=%016lx\n",

arch/x86/kvm/vmx/vmx.c

6730

pr_err("IDTVectoring: info=%08x errcode=%08x\n",

arch/x86/kvm/vmx/vmx.c

6733

pr_err("TSC Offset = 0x%016llx\n", vmcs_read64(TSC_OFFSET));

arch/x86/kvm/vmx/vmx.c

6735

pr_err("TSC Multiplier = 0x%016llx\n",

arch/x86/kvm/vmx/vmx.c

6740

pr_err("SVI|RVI = %02x|%02x ", status >> 8, status & 0xff);

arch/x86/kvm/vmx/vmx.c

6744

pr_err("APIC-access addr = 0x%016llx ", vmcs_read64(APIC_ACCESS_ADDR));

arch/x86/kvm/vmx/vmx.c

6748

pr_err("PostedIntrVec = 0x%02x\n", vmcs_read16(POSTED_INTR_NV));

arch/x86/kvm/vmx/vmx.c

6750

pr_err("EPT pointer = 0x%016llx\n", vmcs_read64(EPT_POINTER));

arch/x86/kvm/vmx/vmx.c

6752

pr_err("PLE Gap=%08x Window=%08x\n",

arch/x86/kvm/vmx/vmx.c

6755

pr_err("Virtual processor ID = 0x%04x\n",

arch/x86/kvm/vmx/vmx.c

6767

pr_err("VE info address = 0x%016llx%s\n", ve_info_pa,

arch/x86/kvm/vmx/vmx.c

6769

pr_err("ve_info: 0x%08x 0x%08x 0x%016llx 0x%016llx 0x%016llx 0x%04x\n",

arch/x86/kvm/x86.c

10052

pr_err("already loaded vendor module '%s'\n", kvm_x86_ops.name);

arch/x86/kvm/x86.c

10062

pr_err("inadequate fpu\n");

arch/x86/kvm/x86.c

10067

pr_err("RT requires X86_FEATURE_CONSTANT_TSC\n");

arch/x86/kvm/x86.c

10080

pr_err("host PAT[0] is not WB\n");

arch/x86/kvm/x86.c

10100

pr_err("failed to allocate cache for x86 emulator\n");

arch/x86/kvm/x86.c

12783

pr_err("failed to allocate vcpu's fpu\n");

arch/x86/kvm/x86.c

8980

pr_err("failed to allocate vcpu's emulator\n");

arch/x86/mm/amdtopology.c

105

pr_err("Node %d using interleaving mode %Lx/%Lx\n",

arch/x86/mm/amdtopology.c

132

pr_err("Empty node %d\n", nodeid);

arch/x86/mm/amdtopology.c

136

pr_err("Node %d bogus settings %Lx-%Lx.\n",

arch/x86/mm/amdtopology.c

143

pr_err("Node map not sorted %Lx,%Lx\n",

arch/x86/mm/fault.c

933

pr_err(

arch/x86/mm/kmmio.c

166

pr_err("no pte for addr 0x%08lx\n", f->addr);

arch/x86/mm/kmmio.c

178

pr_err("unexpected page level 0x%x.\n", level);

arch/x86/mm/kmmio.c

463

pr_err("Unable to set page fault.\n");

arch/x86/mm/mmio-mod.c

233

pr_err("kmalloc failed in ioremap\n");

arch/x86/mm/mmio-mod.c

391

pr_err("Error taking CPU%d down: %d\n", cpu, err);

arch/x86/mm/mmio-mod.c

411

pr_err("cannot re-enable CPU%d: %d\n", cpu, err);

arch/x86/mm/mmio-mod.c

85

pr_err("Error in %s: no pte for page 0x%08lx\n",

arch/x86/mm/numa.c

381

pr_err("node_to_cpumask_map[%i] NULL\n", node);

arch/x86/mm/pat/memtype.c

877

pr_err("x86/PAT: %s:%d map pfn expected mapping type %s for [mem %#010Lx-%#010Lx], got %s\n",

arch/x86/mm/testmmiotrace.c

125

pr_err("you have to use the module argument mmio_address.\n");

arch/x86/mm/testmmiotrace.c

126

pr_err("DO NOT LOAD THIS MODULE UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!\n");

arch/x86/mm/testmmiotrace.c

84

pr_err("could not ioremap, aborting.\n");

arch/x86/net/bpf_jit_comp.c

1336

pr_err("bpf_jit: unknown atomic opcode %02x\n", atomic_op);

arch/x86/net/bpf_jit_comp.c

1363

pr_err("bpf_jit: 1- and 2-byte RMW atomics are not supported\n");

arch/x86/net/bpf_jit_comp.c

1389

pr_err("bpf_jit: unknown atomic opcode %02x\n", atomic_op);

arch/x86/net/bpf_jit_comp.c

1410

pr_err("bpf_jit: unknown atomic load/store opcode %02x\n",

arch/x86/net/bpf_jit_comp.c

1432

pr_err("bpf_jit: unknown atomic load/store opcode %02x\n",

arch/x86/net/bpf_jit_comp.c

2190

pr_err("mem32 extable bug\n");

arch/x86/net/bpf_jit_comp.c

2314

pr_err("ex gen bug\n");

arch/x86/net/bpf_jit_comp.c

2321

pr_err("extable->insn doesn't fit into 32-bit\n");

arch/x86/net/bpf_jit_comp.c

2332

pr_err("verifier error\n");

arch/x86/net/bpf_jit_comp.c

2351

pr_err("bpf_jit: 1- and 2-byte RMW atomics are not supported\n");

arch/x86/net/bpf_jit_comp.c

2421

pr_err("bpf_jit: 1- and 2-byte RMW atomics are not supported\n");

arch/x86/net/bpf_jit_comp.c

2625

pr_err("unexpected jmp_cond padding: %d bytes\n",

arch/x86/net/bpf_jit_comp.c

2635

pr_err("cond_jmp gen bug %llx\n", jmp_offset);

arch/x86/net/bpf_jit_comp.c

2682

pr_err("unexpected nop jump padding: %d bytes\n",

arch/x86/net/bpf_jit_comp.c

2707

pr_err("unexpected jump padding: %d bytes\n",

arch/x86/net/bpf_jit_comp.c

2717

pr_err("jmp gen bug %llx\n", jmp_offset);

arch/x86/net/bpf_jit_comp.c

2758

pr_err("bpf_jit: unknown opcode %02x\n", insn->code);

arch/x86/net/bpf_jit_comp.c

2764

pr_err("bpf_jit: fatal insn size error\n");

arch/x86/net/bpf_jit_comp.c

2779

pr_err("bpf_jit: fatal error\n");

arch/x86/net/bpf_jit_comp.c

2790

pr_err("extable is not populated\n");

arch/x86/net/bpf_jit_comp.c

3078

pr_err("Target %p is out of range\n", func);

arch/x86/net/bpf_jit_comp.c

3697

pr_err("BPF private stack overflow/underflow detected for prog %sx\n",

arch/x86/net/bpf_jit_comp.c

3834

pr_err("bpf_jit: proglen=%d != oldproglen=%d\n",

arch/x86/net/bpf_jit_comp.c

566

pr_err("Target call %p is out of range\n", func);

arch/x86/net/bpf_jit_comp32.c

1633

pr_err("unsupported BPF kernel function jmp_offset:%lld\n",

arch/x86/net/bpf_jit_comp32.c

2110

pr_err("unsupported BPF func %d addr %p image %p\n",

arch/x86/net/bpf_jit_comp32.c

2371

pr_err("cond_jmp gen bug %llx\n", jmp_offset);

arch/x86/net/bpf_jit_comp32.c

2418

pr_err("cond_jmp gen bug %llx\n", jmp_offset);

arch/x86/net/bpf_jit_comp32.c

2431

pr_err("cond_jmp gen bug %llx\n", jmp_offset);

arch/x86/net/bpf_jit_comp32.c

2457

pr_err("jmp gen bug %llx\n", jmp_offset);

arch/x86/net/bpf_jit_comp32.c

2483

pr_err("bpf_jit: unknown opcode %02x\n", code);

arch/x86/net/bpf_jit_comp32.c

2489

pr_err("bpf_jit: fatal insn size error\n");

arch/x86/net/bpf_jit_comp32.c

2504

pr_err("bpf_jit: fatal error\n");

arch/x86/net/bpf_jit_comp32.c

2582

pr_err("bpf_jit: proglen=%d != oldproglen=%d\n",

arch/x86/pci/mmconfig-shared.c

611

pr_err("ECAM at %#llx for %04x [bus %02x-%02x] is above 4GB, ignored\n",

arch/x86/pci/mmconfig-shared.c

638

pr_err("MCFG has no entries\n");

arch/x86/pci/mmconfig_64.c

118

pr_err("can't map ECAM at %pR\n", &cfg->res);

arch/x86/platform/atom/punit_atom_debug.c

140

pr_err("%s read failed\n", punit_devp->name);

arch/x86/platform/atom/punit_atom_debug.c

144

pr_err("%s is in D0 prior to s2idle\n", punit_devp->name);

arch/x86/platform/efi/efi.c

204

pr_err("Memory map is above 4GB, disabling EFI.\n");

arch/x86/platform/efi/efi.c

373

pr_err("Couldn't map the system table!\n");

arch/x86/platform/efi/efi.c

428

pr_err("EFI data located above 4GB, disabling EFI.\n");

arch/x86/platform/efi/efi.c

453

pr_err("Could not map Configuration table!\n");

arch/x86/platform/efi/efi.c

491

pr_err("No EFI runtime due to 32/64-bit mismatch with kernel\n");

arch/x86/platform/efi/efi.c

729

pr_err("Failed to allocate EFI page tables\n");

arch/x86/platform/efi/efi.c

749

pr_err("Failed to remap late EFI memory map\n");

arch/x86/platform/efi/efi.c

792

pr_err("Failed to allocate EFI page tables\n");

arch/x86/platform/efi/efi.c

799

pr_err("Error reallocating memory, EFI runtime non-functional!\n");

arch/x86/platform/efi/efi.c

813

pr_err("Failed to remap late EFI memory map\n");

arch/x86/platform/efi/efi.c

833

pr_err("Unable to switch EFI into virtual mode (status=%lx)!\n",

arch/x86/platform/efi/efi_32.c

58

pr_err("ioremap of 0x%llX failed!\n", md->phys_addr);

arch/x86/platform/efi/efi_64.c

195

pr_err("Error ident-mapping new memmap (0x%lx)!\n", pa_memmap);

arch/x86/platform/efi/efi_64.c

211

pr_err("Failed to create 1:1 mapping for the first page!\n");

arch/x86/platform/efi/efi_64.c

220

pr_err("Failed to create 1:1 mapping for the GHCBs and CAs!\n");

arch/x86/platform/efi/efi_64.c

235

pr_err("Unable to allocate EFI runtime stack < 4GB\n");

arch/x86/platform/efi/efi_64.c

245

pr_err("Failed to unmap kernel text 1:1 mapping\n");

arch/x86/platform/efi/efi_64.c

255

pr_err("Failed to map kernel rodata 1:1\n");

arch/x86/platform/efi/efi_64.c

264

pr_err("Failed to map mixed mode return trampoline\n");

arch/x86/platform/efi/efi_64.c

380

pr_err("Error while updating 1:1 mapping PA 0x%llx -> VA 0x%llx!\n",

arch/x86/platform/efi/efi_64.c

386

pr_err("Error while updating VA mapping PA 0x%llx -> VA 0x%llx!\n",

arch/x86/platform/efi/quirks.c

263

pr_err("Failed to lookup EFI memory descriptor for %pa\n", &addr);

arch/x86/platform/efi/quirks.c

268

pr_err("Region spans EFI memory descriptors, %pa\n", &addr);

arch/x86/platform/efi/quirks.c

284

pr_err("Could not allocate boot services memmap\n");

arch/x86/platform/efi/quirks.c

291

pr_err("Failed to map new boot services memmap\n");

arch/x86/platform/efi/quirks.c

401

pr_err("Failed to unmap 1:1 mapping for 0x%llx\n", pa);

arch/x86/platform/efi/quirks.c

404

pr_err("Failed to unmap VA mapping for 0x%llx\n", va);

arch/x86/platform/efi/quirks.c

430

pr_err("Failed to allocate storage for freeable EFI regions\n");

arch/x86/platform/efi/quirks.c

505

pr_err("Failed to allocate new EFI memmap\n");

arch/x86/platform/efi/quirks.c

511

pr_err("Failed to map new EFI memmap\n");

arch/x86/platform/efi/quirks.c

534

pr_err("Could not install new EFI memmap\n");

arch/x86/platform/efi/quirks.c

601

pr_err("Could not map Configuration table!\n");

arch/x86/platform/efi/quirks.c

686

pr_err("multiple Quark security headers not supported\n");

arch/x86/platform/geode/geode-common.c

114

pr_err("%s: too many LEDs\n", __func__);

arch/x86/platform/geode/geode-common.c

164

pr_err("failed to register LED software nodes: %d\n", err);

arch/x86/platform/geode/geode-common.c

173

pr_err("failed to create LED device: %d\n", err);

arch/x86/platform/geode/geode-common.c

74

pr_err("failed to register gpio-keys software nodes: %d\n", err);

arch/x86/platform/geode/geode-common.c

83

pr_err("failed to create gpio-keys device: %d\n", err);

arch/x86/platform/intel-quark/imr.c

252

pr_err("base %pa size 0x%08zx must align to 1KiB\n",

arch/x86/platform/intel-quark/imr.c

562

pr_err("unable to setup IMR for kernel: %zu KiB (%lx - %lx)\n",

arch/x86/platform/olpc/olpc-xo1-sci.c

202

pr_err(PFX "Failed to clear SCI queue");

arch/x86/platform/olpc/olpc-xo1-sci.c

78

pr_err(PFX "failed to get ebook state\n");

arch/x86/platform/olpc/olpc-xo15-sci.c

123

pr_err(PFX "Failed to clear SCI queue");

arch/x86/platform/olpc/olpc_dt.c

169

pr_err("olpc_dt: finddevice failed!\n");

arch/x86/platform/olpc/olpc_dt.c

186

pr_err("olpc_dt: interpret failed!\n");

arch/x86/platform/olpc/olpc_dt.c

314

pr_err("PROM: unable to get root node from OFW!\n");

arch/x86/platform/olpc/olpc_dt.c

45

pr_err("PROM: %s: fetching child failed!\n", __func__);

arch/x86/platform/olpc/olpc_dt.c

62

pr_err("PROM: %s: getproplen failed!\n", __func__);

arch/x86/platform/olpc/olpc_dt.c

82

pr_err("PROM: %s: getprop failed!\n", __func__);

arch/x86/platform/scx200/scx200_32.c

69

pr_err("can't allocate I/O for GPIOs\n");

arch/x86/platform/ts5500/ts5500.c

128

pr_err("ts5500: unknown product code 0x%x\n", sbc->id);

arch/x86/platform/uv/bios_uv.c

251

pr_err("UV: UVsystab: bad signature!\n");

arch/x86/platform/uv/bios_uv.c

263

pr_err("UV: UVsystab: ioremap(%d) failed!\n", size);

arch/x86/platform/uv/uv_nmi.c

228

pr_err("UV: Invalid NMI action. Valid actions are:\n");

arch/x86/platform/uv/uv_nmi.c

230

pr_err("UV: %-8s - %s\n", actions[i], actions_desc[i]);

arch/x86/platform/uv/uv_nmi.c

269

pr_err("UV:%s:NMI support not available on this system\n", __func__);

arch/x86/platform/uv/uv_nmi.c

845

pr_err("UV: NMI error: kdump kernel not loaded\n");

arch/x86/platform/uv/uv_nmi.c

883

pr_err("UV: NMI error: KDB is not enabled in this kernel\n");

arch/x86/platform/uv/uv_nmi.c

930

pr_err("UV: NMI error: KGDB is not enabled in this kernel\n");

arch/x86/power/cpu.c

399

pr_err("x86/pm: Can not allocate memory to save/restore MSRs during suspend.\n");

arch/x86/virt/svm/sev.c

269

pr_err("Failed to map RMP bookkeeping area\n");

arch/x86/virt/svm/sev.c

291

pr_err("Invalid RMP size 0x%llx for configured segment size 0x%llx\n",

arch/x86/virt/svm/sev.c

299

pr_err("Invalid RMP segment base address 0x%llx for configured segment size 0x%llx\n",

arch/x86/virt/svm/sev.c

305

pr_err("RMP segment descriptor already exists at index %llu\n", rst_index);

arch/x86/virt/svm/sev.c

311

pr_err("Failed to map RMP segment addr 0x%llx size 0x%llx\n",

arch/x86/virt/svm/sev.c

386

pr_err("Memory reserved for the RMP table does not cover full system RAM (expected 0x%llx got 0x%llx)\n",

arch/x86/virt/svm/sev.c

420

pr_err("Failed to map RMP segment table addr 0x%llx\n", rst_pa);

arch/x86/virt/svm/sev.c

473

pr_err("Segmented RMP does not cover full system RAM (expected 0x%llx got 0x%llx)\n",

arch/x86/virt/svm/sev.c

584

pr_err("Memory for the RMP table has not been reserved by BIOS\n");

arch/x86/virt/svm/sev.c

589

pr_err("RMP configuration not valid: base=%#llx, end=%#llx\n", rmp_base, rmp_end);

arch/x86/virt/svm/sev.c

616

pr_err("Memory for the RMP table has not been reserved by BIOS\n");

arch/x86/virt/svm/sev.c

632

pr_err("RMP segment size (%u) is not within advertised bounds (min=%u, max=%u)\n",

arch/x86/virt/svm/sev.c

792

pr_err("Failed to read RMP entry for PFN 0x%llx, error %d\n",

arch/x86/virt/svm/sev.c

800

pr_err("Failed to read RMP contents for PFN 0x%llx, error %ld\n",

arch/x86/virt/svm/sev.c

827

pr_err("Error %ld reading RMP contents for PFN 0x%llx\n",

arch/x86/virt/svm/sev.c

851

pr_err("Can't dump RMP entry for HVA %lx: no PTE/PFN found\n", hva);

arch/x86/virt/svm/sev.c

994

pr_err("RMPUPDATE failed for PFN %llx, pg_level: %d, ret: %d\n",

arch/x86/virt/vmx/tdx/tdx.c

1166

pr_err("module initialization failed (%d)\n", ret);

arch/x86/virt/vmx/tdx/tdx.c

136

pr_err("module not loaded\n");

arch/x86/virt/vmx/tdx/tdx.c

1431

pr_err("initialization failed: too few private KeyIDs available.\n");

arch/x86/virt/vmx/tdx/tdx.c

1440

pr_err("initialization failed: Hibernation support is enabled\n");

arch/x86/virt/vmx/tdx/tdx.c

1446

pr_err("initialization failed: register_memory_notifier() failed (%d)\n",

arch/x86/virt/vmx/tdx/tdx.c

288

pr_err("frame pointer (RBP) clobber bug present, upgrade TDX module\n");

arch/x86/virt/vmx/tdx/tdx.c

66

pr_err("SEAMCALL (0x%016llx) failed: 0x%016llx\n", fn, err);

arch/x86/virt/vmx/tdx/tdx.c

73

pr_err("RCX 0x%016llx RDX 0x%016llx R08 0x%016llx\n",

arch/x86/virt/vmx/tdx/tdx.c

75

pr_err("R09 0x%016llx R10 0x%016llx R11 0x%016llx\n",

arch/x86/xen/efi.c

109

pr_err("Could not determine UEFI Secure Boot status.\n");

arch/x86/xen/enlighten_pv.c

708

pr_err("Unknown trap in Xen PV mode.");

arch/x86/xen/multicalls.c

124

pr_err(" call %2d: op=%lu result=%ld caller=%pS ", idx + 1,

arch/x86/xen/multicalls.c

191

pr_err("%d of %d multicall(s) failed: cpu %d\n",

arch/x86/xen/multicalls.c

197

pr_err(" call %2d: op=%lu arg=[%lx] result=%ld\n",

arch/x86/xen/multicalls.c

90

pr_err("xen_mc_debug inactive\n");

arch/x86/xen/platform-pci-unplug.c

35

pr_err("Xen Platform PCI: unrecognised magic value\n");

arch/x86/xen/platform-pci-unplug.c

49

pr_err("Xen Platform: blacklisted by host\n");

arch/x86/xen/pmu.c

504

pr_err("VPMU init: No memory\n");

arch/xtensa/kernel/module.c

111

pr_err("%s: relocation out of range, "

arch/xtensa/kernel/module.c

156

pr_err("%s: unexpected FLIX relocation: %u\n",

arch/xtensa/kernel/module.c

176

pr_err("%s: unexpected ALT relocation: %u\n",

arch/xtensa/kernel/module.c

182

pr_err("%s: unexpected relocation: %u\n",

arch/xtensa/kernel/module.c

87

pr_err("%s: relocation out of range, "

arch/xtensa/kernel/pci.c

49

pr_err("PCI: I/O Region %s/%d too large (%u bytes)\n",

arch/xtensa/kernel/perf_event.c

431

pr_err("xtensa_pmu: failed to register CPU-hotplug.\n");

arch/xtensa/kernel/platform.c

42

pr_err("ERROR: Cannot calibrate cpu frequency! Assuming 10 MHz.\n");

arch/xtensa/kernel/setup.c

527

pr_err("Reboot failed -- System halted\n");

arch/xtensa/kernel/smp.c

257

pr_err("CPU %u failed to boot\n", cpu);

arch/xtensa/kernel/smp.c

323

pr_err("CPU%u: unable to kill\n", cpu);

arch/xtensa/kernel/smp.c

63

pr_err("Failed to request irq %u (ipi)\n", irq);

arch/xtensa/kernel/time.c

197

pr_err("Failed to request irq %d (timer)\n", irq);

arch/xtensa/mm/tlb.c

247

pr_err("%cTLB: way: %u, entry: %u, VPN %08x in %s PTE\n",

arch/xtensa/mm/tlb.c

255

pr_err("%cTLB: way: %u, entry: %u, mapping: %08x->%08x, PTE: %08x\n",

arch/xtensa/mm/tlb.c

261

pr_err("folio refcount: %d, mapcount: %d\n",

arch/xtensa/platforms/iss/console.c

132

pr_err("Couldn't register serial driver\n");

arch/xtensa/platforms/iss/network.c

130

pr_err("%s: failed to parse '%s' as an ethernet address\n",

arch/xtensa/platforms/iss/network.c

135

pr_err("%s: attempt to assign a multicast ethernet address\n",

arch/xtensa/platforms/iss/network.c

140

pr_err("%s: attempt to assign an invalid ethernet address\n",

arch/xtensa/platforms/iss/network.c

167

pr_err("%s: failed to open /dev/net/tun, returned %d (errno = %d)\n",

arch/xtensa/platforms/iss/network.c

178

pr_err("%s: failed to set interface %s, returned %d (errno = %d)\n",

arch/xtensa/platforms/iss/network.c

243

pr_err("%s: extra garbage on specification : '%s'\n",

arch/xtensa/platforms/iss/network.c

248

pr_err("%s: invalid argument: %s. Skipping device!\n",

arch/xtensa/platforms/iss/network.c

254

pr_err("%s: missing tuntap device name\n", dev->name);

arch/xtensa/platforms/iss/network.c

329

pr_err("Device '%s' read returned %d, shutting it down\n",

arch/xtensa/platforms/iss/network.c

413

pr_err("%s: %s failed(%d)\n", dev->name, __func__, len);

arch/xtensa/platforms/iss/network.c

486

pr_err("eth_configure: failed to allocate device\n");

arch/xtensa/platforms/iss/network.c

512

pr_err("%s: invalid arguments. Skipping device!\n",

arch/xtensa/platforms/iss/network.c

542

pr_err("%s: error registering net device!\n", dev->name);

arch/xtensa/platforms/iss/network.c

585

pr_err("Expected '=' after device number\n");

arch/xtensa/platforms/iss/network.c

592

pr_err("Failed to parse '%s'\n", str);

arch/xtensa/platforms/iss/network.c

604

pr_err("Device %u already configured\n", n);

arch/xtensa/platforms/iss/network.c

610

pr_err("Alloc_bootmem failed\n");

arch/xtensa/platforms/iss/setup.c

69

pr_err("%s: command line too long: argv_size = %d\n",

arch/xtensa/platforms/iss/simdisk.c

168

pr_err("SIMDISK: Can't open %s: %d\n", filename, errno);

arch/xtensa/platforms/iss/simdisk.c

194

pr_err("SIMDISK: error closing %s: %d\n",

arch/xtensa/platforms/iss/simdisk.c

313

pr_err("SIMDISK: register_blkdev: %d\n", simdisk_major);

arch/xtensa/platforms/iss/simdisk.c

94

pr_err("SIMDISK: IO error %d\n", errno);

arch/xtensa/platforms/xtfpga/setup.c

103

pr_err("%pOFn: clk provider registration failed\n", np);

arch/xtensa/platforms/xtfpga/setup.c

89

pr_err("%pOFn: invalid address\n", np);

arch/xtensa/platforms/xtfpga/setup.c

98

pr_err("%pOFn: clk registration failed\n", np);

block/bfq-iosched.c

5518

pr_err("bdi %s: bfq: bad prio class %d\n",

block/blk-mq-debugfs.c

128

pr_err("%s: operation too long\n", __func__);

block/blk-mq-debugfs.c

142

pr_err("%s: unsupported operation '%s'\n", __func__, op);

block/blk-mq-debugfs.c

144

pr_err("%s: use 'run', 'start' or 'kick'\n", __func__);

block/blk-mq-tag.c

558

pr_err("blk-mq: tag depth too large\n");

block/blk-mq.c

4748

pr_err("blk-mq: failed to allocate request map\n");

block/early-lookup.c

90

pr_err("VFS: PARTUUID= is invalid.\n"

block/genhd.c

260

pr_err("%s: major requested (%u) is greater than the maximum (%u) for %s\n",

block/genhd.c

467

pr_err("block: can't allocate more than %d partitions\n",

block/partitions/amiga.c

102

pr_err("Dev %s: unable to read partition block %llu\n",

block/partitions/amiga.c

126

pr_err("Dev %s: heads*sects %u overflows u32, skipping partition!\n",

block/partitions/amiga.c

143

pr_err("Dev %s: partition %u bytes per cyl. overflows u32, skipping partition!\n",

block/partitions/amiga.c

170

pr_err("Dev %s: partition %u (%llu-%llu) needs LBD device support, skipping partition!\n",

block/partitions/amiga.c

55

pr_err("Dev %s: unable to read RDB block %llu\n",

block/partitions/amiga.c

72

pr_err("Trashed word at 0xd0 in block %llu ignored in checksum calculation\n",

block/partitions/amiga.c

77

pr_err("Dev %s: RDB in block %llu has bad checksum\n",

block/partitions/amiga.c

96

pr_err("Dev %s: overflow calculating partition block %llu! Skipping partitions %u and beyond\n",

block/sed-opal.c

294

pr_err("Error adding SED key (%ld)\n", PTR_ERR(kr));

block/t10-pi.c

267

pr_err("%s: ref tag error at location %llu (rcvd %llu)\n",

block/t10-pi.c

283

pr_err("%s: guard tag error at sector %llu " \

block/t10-pi.c

80

pr_err("%s: ref tag error at location %llu " \

block/t10-pi.c

99

pr_err("%s: guard tag error at sector %llu " \

certs/blacklist.c

199

pr_err("Problem blacklisting hash %s: %pe\n", hash, key);

certs/blacklist.c

278

pr_err("Problem with revocation key (%ld)\n", PTR_ERR(key));

certs/blacklist.c

353

pr_err("- blacklisting failed\n");

certs/system_keyring.c

177

pr_err("Problem loading X.509 certificate from %s to secondary keyring %ld\n",

certs/system_keyring.c

324

pr_err("PKCS#7 signature with non-detached data\n");

crypto/algapi.c

377

pr_err("alg: Unexpected test result for %s: %d\n", name, err);

crypto/asymmetric_keys/asymmetric_type.c

636

pr_err("Asymmetric key parser '%s' already registered\n",

crypto/asymmetric_keys/mscode_parser.c

102

pr_err("Unknown OID: %s\n", buffer);

crypto/asymmetric_keys/mscode_parser.c

106

pr_err("Unsupported content type: %u\n", oid);

crypto/asymmetric_keys/mscode_parser.c

47

pr_err("Unknown OID: %s\n", buffer);

crypto/asymmetric_keys/mscode_parser.c

58

pr_err("Unexpected content type OID %u\n", oid);

crypto/asymmetric_keys/pkcs7_key_type.c

56

pr_err("Invalid usage type %d\n", usage);

crypto/asymmetric_keys/restrict.c

38

pr_err("Missing or invalid ca_keys id\n");

crypto/asymmetric_keys/restrict.c

44

pr_err("Unparsable ca_keys id hex string\n");

crypto/asymmetric_keys/x509_loader.c

42

pr_err("Problem loading in-kernel X.509 certificate (%ld)\n",

crypto/asymmetric_keys/x509_loader.c

55

pr_err("Problem parsing in-kernel X.509 certificate list\n");

crypto/asymmetric_keys/x509_public_key.c

42

pr_err("Cert %*phN is blacklisted\n",

crypto/async_tx/async_pq.c

449

pr_err("%s: failed to allocate required spare page\n", __func__);

crypto/drbg.c

1247

pr_err("DRBG: periodical self test failed\n");

crypto/hkdf.c

473

pr_err("%s(%s): failed to allocate transform: %ld\n",

crypto/hkdf.c

487

pr_err("%s(%s): prk size mismatch (vec %u, digest %u\n",

crypto/hkdf.c

496

pr_err("%s(%s): hkdf_extract failed with %d\n",

crypto/hkdf.c

502

pr_err("%s(%s): hkdf_extract prk mismatch\n",

crypto/hkdf.c

518

pr_err("%s(%s): failed to set prk, error %d\n",

crypto/hkdf.c

526

pr_err("%s(%s): hkdf_expand() failed with %d\n",

crypto/hkdf.c

529

pr_err("%s(%s): hkdf_expand() okm mismatch\n",

crypto/jitterentropy-kcapi.c

236

pr_err("Cannot allocate conditioning digest\n");

crypto/jitterentropy-kcapi.c

290

pr_err("Jitter RNG permanent health test failure\n");

crypto/krb5/krb5_api.c

178

pr_err("Couldn't set AEAD key %s: %d\n", krb5->encrypt_name, ret);

crypto/krb5/krb5_api.c

184

pr_err("Couldn't set AEAD authsize %s: %d\n", krb5->encrypt_name, ret);

crypto/krb5/krb5_api.c

252

pr_err("Couldn't set shash key %s: %d\n", krb5->cksum_name, ret);

crypto/krb5/krb5_api.c

284

pr_err("get_Kc failed %d\n", ret);

crypto/krb5/rfc3961_simplified.c

461

pr_err("get_Ke failed %d\n", ret);

crypto/krb5/rfc3961_simplified.c

466

pr_err("get_Ki failed %d\n", ret);

crypto/krb5/rfc3961_simplified.c

517

pr_err("get_Kc failed %d\n", ret);

crypto/krb5/selftest.c

301

pr_err("Couldn't alloc AEAD %s: %d\n", krb5->encrypt_name, ret);

crypto/krb5/selftest.c

410

pr_err("Couldn't alloc shash %s: %d\n", krb5->cksum_name, ret);

crypto/krb5enc.c

411

pr_err("attr_type failed\n");

crypto/krb5enc.c

423

pr_err("grab ahash failed\n");

crypto/krb5enc.c

432

pr_err("grab skcipher failed\n");

crypto/krb5enc.c

472

pr_err("ref failed\n");

crypto/mldsa.c

183

pr_err("Failed to register (%d)\n", ret);

crypto/rsa_helper.c

35

pr_err("RSA: key size not allowed in FIPS mode\n");

crypto/tcrypt.c

1084

pr_err("failed to load transform for %s: %ld\n",

crypto/tcrypt.c

1099

pr_err("alg: skcipher: Failed to allocate request for %s\n",

crypto/tcrypt.c

1124

pr_err("template (%u) too big for buffer (%lu)\n",

crypto/tcrypt.c

1147

pr_err("setkey() failed flags=%x\n",

crypto/tcrypt.c

1192

pr_err("%s() failed flags=%x\n", e,

crypto/tcrypt.c

1316

pr_err("failed to load transform for %s: %ld\n", algo,

crypto/tcrypt.c

1326

pr_err("skcipher: Failed to allocate request for %s\n", algo);

crypto/tcrypt.c

1342

pr_err("template (%u) too big for "

crypto/tcrypt.c

1366

pr_err("setkey() failed flags=%x\n",

crypto/tcrypt.c

1407

pr_err("%s() failed flags=%x\n", e,

crypto/tcrypt.c

260

pr_err("associate data length (%u) too big\n", aad_size);

crypto/tcrypt.c

279

pr_err("failed to load transform for %s: %ld\n",

crypto/tcrypt.c

2814

pr_err("one or more tests failed!\n");

crypto/tcrypt.c

286

pr_err("alg: aead: Failed to setauthsize for %s: %d\n", algo,

crypto/tcrypt.c

315

pr_err("alg: aead: Failed to allocate request for %s\n",

crypto/tcrypt.c

340

pr_err("template (%u) too big for buffer (%lu)\n",

crypto/tcrypt.c

364

pr_err("setkey() failed flags=%x\n",

crypto/tcrypt.c

401

pr_err("calculating auth failed (%d)\n",

crypto/tcrypt.c

424

pr_err("%s() failed return code=%d\n", e, ret);

crypto/tcrypt.c

545

pr_err("associate data length (%u) too big\n", aad_size);

crypto/tcrypt.c

568

pr_err("alg: aead: Failed to load transform for %s: %ld\n", algo,

crypto/tcrypt.c

575

pr_err("alg: aead: Failed to setauthsize for %s: %d\n", algo,

crypto/tcrypt.c

586

pr_err("alg: aead: Failed to allocate request for %s\n",

crypto/tcrypt.c

604

pr_err("template (%u) too big for tvmem (%lu)\n",

crypto/tcrypt.c

620

pr_err("setkey() failed flags=%x: %d\n",

crypto/tcrypt.c

657

pr_err("calculating auth failed (%d)\n",

crypto/tcrypt.c

676

pr_err("%s() failed return code=%d\n", e, ret);

crypto/tcrypt.c

878

pr_err("failed to load transform for %s: %ld\n",

crypto/tcrypt.c

887

pr_err("digestsize(%u) > %d\n", crypto_ahash_digestsize(tfm),

crypto/tcrypt.c

895

pr_err("ahash request allocation failure\n");

crypto/tcrypt.c

909

pr_err("template (%u) too big for tvmem (%lu)\n",

crypto/tcrypt.c

933

pr_err("hashing failed ret=%d\n", ret);

crypto/testmgr.c

1236

pr_err("alg: generic driver name for \"%s\" would be too long\n",

crypto/testmgr.c

1265

pr_err("alg: %s: %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1270

pr_err("alg: %s: %s overran result buffer on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1282

pr_err("alg: shash: %s %s() failed with err %d on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1311

pr_err("alg: shash: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n",

crypto/testmgr.c

1317

pr_err("alg: shash: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n",

crypto/testmgr.c

1326

pr_err("alg: shash: %s: error preparing scatterlist for test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1350

pr_err("alg: shash: %s digest() failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n",

crypto/testmgr.c

1356

pr_err("alg: shash: %s digest() unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n",

crypto/testmgr.c

1409

pr_err("alg: shash: %s export() overran state buffer on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1458

pr_err("alg: ahash: %s %s() failed with err %d on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1463

pr_err("alg: ahash: %s %s() used result buffer on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1498

pr_err("alg: ahash: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n",

crypto/testmgr.c

1504

pr_err("alg: ahash: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n",

crypto/testmgr.c

1513

pr_err("alg: ahash: %s: error preparing scatterlist for test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1533

pr_err("alg: ahash: %s digest() failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n",

crypto/testmgr.c

1539

pr_err("alg: ahash: %s digest() unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n",

crypto/testmgr.c

1588

pr_err("alg: ahash: %s export() overran state buffer on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1617

pr_err("alg: ahash: %s final() failed with err %d on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1625

pr_err("alg: ahash: %s finup() failed with err %d on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

1794

pr_err("alg: hash: error allocating %s (generic impl of %s): %d\n",

crypto/testmgr.c

1814

pr_err("alg: hash: digestsize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

1822

pr_err("alg: hash: blocksize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

1881

pr_err("alg: hash: failed to allocate shash transform for %s: %ld\n",

crypto/testmgr.c

1922

pr_err("alg: hash: failed to allocate transform for %s: %ld\n",

crypto/testmgr.c

1930

pr_err("alg: hash: failed to allocate request for %s\n",

crypto/testmgr.c

1946

pr_err("alg: hash: failed to allocate test buffers for %s\n",

crypto/testmgr.c

1959

pr_err("alg: hash: failed to allocate hash state buffer for %s\n",

crypto/testmgr.c

2010

pr_err("alg: hash: test vectors for %s out of order, "

crypto/testmgr.c

2062

pr_err("alg: aead: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n",

crypto/testmgr.c

2068

pr_err("alg: aead: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n",

crypto/testmgr.c

2076

pr_err("alg: aead: %s setauthsize failed on test vector %s; expected_error=%d, actual_error=%d\n",

crypto/testmgr.c

2081

pr_err("alg: aead: %s setauthsize unexpectedly succeeded on test vector %s; expected_error=%d\n",

crypto/testmgr.c

2109

pr_err("alg: aead: %s %s: error preparing scatterlists for test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2137

pr_err("alg: aead: %s %s corrupted request struct on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2140

pr_err("alg: aead: changed 'req->cryptlen'\n");

crypto/testmgr.c

2142

pr_err("alg: aead: changed 'req->assoclen'\n");

crypto/testmgr.c

2144

pr_err("alg: aead: changed 'req->iv'\n");

crypto/testmgr.c

2146

pr_err("alg: aead: changed 'req->src'\n");

crypto/testmgr.c

2148

pr_err("alg: aead: changed 'req->dst'\n");

crypto/testmgr.c

2150

pr_err("alg: aead: changed 'req->base.tfm'\n");

crypto/testmgr.c

2152

pr_err("alg: aead: changed 'req->base.complete'\n");

crypto/testmgr.c

2154

pr_err("alg: aead: changed 'req->base.flags'\n");

crypto/testmgr.c

2156

pr_err("alg: aead: changed 'req->base.data'\n");

crypto/testmgr.c

2160

pr_err("alg: aead: %s %s corrupted src sgl on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2166

pr_err("alg: aead: %s %s corrupted dst sgl on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2185

pr_err("alg: aead: %s %s failed on test vector %s; expected_error=%s, actual_error=%d, cfg=\"%s\"\n",

crypto/testmgr.c

2190

pr_err("alg: aead: %s %s unexpectedly succeeded on test vector %s; expected_error=%s, cfg=\"%s\"\n",

crypto/testmgr.c

2203

pr_err("alg: aead: %s %s overran dst buffer on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2208

pr_err("alg: aead: %s %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2516

pr_err("alg: aead: error allocating %s (generic impl of %s): %d\n",

crypto/testmgr.c

2531

pr_err("alg: aead: maxauthsize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

2539

pr_err("alg: aead: ivsize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

2547

pr_err("alg: aead: blocksize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

2667

pr_err("alg: aead: empty test suite for %s\n", driver);

crypto/testmgr.c

2675

pr_err("alg: aead: failed to allocate transform for %s: %ld\n",

crypto/testmgr.c

2683

pr_err("alg: aead: failed to allocate request for %s\n",

crypto/testmgr.c

2691

pr_err("alg: aead: failed to allocate test buffers for %s\n",

crypto/testmgr.c

2760

pr_err("alg: cipher: %s setkey failed on test vector %u; expected_error=%d, actual_error=%d, flags=%#x\n",

crypto/testmgr.c

2766

pr_err("alg: cipher: %s setkey unexpectedly succeeded on test vector %u; expected_error=%d\n",

crypto/testmgr.c

2831

pr_err("alg: skcipher: %s setkey failed on test vector %s; expected_error=%d, actual_error=%d, flags=%#x\n",

crypto/testmgr.c

2837

pr_err("alg: skcipher: %s setkey unexpectedly succeeded on test vector %s; expected_error=%d\n",

crypto/testmgr.c

2860

pr_err("alg: skcipher: %s %s: error preparing scatterlists for test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2886

pr_err("alg: skcipher: %s %s corrupted request struct on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2889

pr_err("alg: skcipher: changed 'req->cryptlen'\n");

crypto/testmgr.c

2891

pr_err("alg: skcipher: changed 'req->iv'\n");

crypto/testmgr.c

2893

pr_err("alg: skcipher: changed 'req->src'\n");

crypto/testmgr.c

2895

pr_err("alg: skcipher: changed 'req->dst'\n");

crypto/testmgr.c

2897

pr_err("alg: skcipher: changed 'req->base.tfm'\n");

crypto/testmgr.c

2899

pr_err("alg: skcipher: changed 'req->base.complete'\n");

crypto/testmgr.c

2901

pr_err("alg: skcipher: changed 'req->base.flags'\n");

crypto/testmgr.c

2903

pr_err("alg: skcipher: changed 'req->base.data'\n");

crypto/testmgr.c

2907

pr_err("alg: skcipher: %s %s corrupted src sgl on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2913

pr_err("alg: skcipher: %s %s corrupted dst sgl on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2922

pr_err("alg: skcipher: %s %s failed on test vector %s; expected_error=%d, actual_error=%d, cfg=\"%s\"\n",

crypto/testmgr.c

2927

pr_err("alg: skcipher: %s %s unexpectedly succeeded on test vector %s; expected_error=%d, cfg=\"%s\"\n",

crypto/testmgr.c

2936

pr_err("alg: skcipher: %s %s overran dst buffer on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2941

pr_err("alg: skcipher: %s %s test failed (wrong result) on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

2948

pr_err("alg: skcipher: %s %s test failed (wrong output IV) on test vector %s, cfg=\"%s\"\n",

crypto/testmgr.c

3104

pr_err("alg: skcipher: error allocating %s (generic impl of %s): %d\n",

crypto/testmgr.c

3125

pr_err("alg: skcipher: min keysize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

3133

pr_err("alg: skcipher: max keysize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

3141

pr_err("alg: skcipher: ivsize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

3148

pr_err("alg: skcipher: blocksize for %s (%u) doesn't match generic impl (%u)\n",

crypto/testmgr.c

3224

pr_err("alg: skcipher: empty test suite for %s\n", driver);

crypto/testmgr.c

3232

pr_err("alg: skcipher: failed to allocate transform for %s: %ld\n",

crypto/testmgr.c

3240

pr_err("alg: skcipher: failed to allocate request for %s\n",

crypto/testmgr.c

3248

pr_err("alg: skcipher: failed to allocate test buffers for %s\n",

crypto/testmgr.c

3311

pr_err("alg: acomp: request alloc failed for %s\n",

crypto/testmgr.c

3324

pr_err("alg: acomp: compression failed on test %d for %s: ret=%d\n",

crypto/testmgr.c

3340

pr_err("alg: acomp: compression failed on test %d for %s: ret=%d\n",

crypto/testmgr.c

3348

pr_err("alg: acomp: Compression test %d failed for %s: output len = %d\n",

crypto/testmgr.c

3357

pr_err("alg: acomp: Compression test %d failed for %s\n",

crypto/testmgr.c

3388

pr_err("alg: acomp: request alloc failed for %s\n",

crypto/testmgr.c

3401

pr_err("alg: acomp: decompression failed on test %d for %s: ret=%d\n",

crypto/testmgr.c

3409

pr_err("alg: acomp: Decompression test %d failed for %s: output len = %d\n",

crypto/testmgr.c

3418

pr_err("alg: acomp: Decompression test %d failed for %s\n",

crypto/testmgr.c

3473

pr_err("alg: acomp: Failed to load transform for %s: %ld\n",

crypto/testmgr.c

3621

pr_err("alg: %s: Party A: generate public key test failed. err %d\n",

crypto/testmgr.c

3637

pr_err("alg: %s: Party A: generate public key test failed. Invalid output\n",

crypto/testmgr.c

3659

pr_err("alg: %s: Party A: compute shared secret test failed. err %d\n",

crypto/testmgr.c

3690

pr_err("alg: %s: Party B: compute shared secret failed. err %d\n",

crypto/testmgr.c

3706

pr_err("alg: %s: compute shared secret test failed. Invalid output\n",

crypto/testmgr.c

3730

pr_err("alg: %s: test failed on vector %d, err=%d\n",

crypto/testmgr.c

3748

pr_err("alg: kpp: Failed to load tfm for %s: %ld\n",

crypto/testmgr.c

3824

pr_err("alg: akcipher: encrypt test failed. err %d\n", err);

crypto/testmgr.c

3829

pr_err("alg: akcipher: encrypt test failed. Invalid output len\n");

crypto/testmgr.c

3835

pr_err("alg: akcipher: encrypt test failed. Invalid output\n");

crypto/testmgr.c

3873

pr_err("alg: akcipher: decrypt test failed. err %d\n", err);

crypto/testmgr.c

3878

pr_err("alg: akcipher: decrypt test failed. Invalid output len %u\n",

crypto/testmgr.c

3887

pr_err("alg: akcipher: decrypt test failed. Invalid output\n");

crypto/testmgr.c

3914

pr_err("alg: akcipher: test %d failed for %s, err=%d\n",

crypto/testmgr.c

3931

pr_err("alg: akcipher: Failed to load tfm for %s: %ld\n",

crypto/testmgr.c

3974

pr_err("alg: sig: verify test failed: err %d\n", err);

crypto/testmgr.c

3987

pr_err("alg: sig: invalid maxsize %u\n", sig_size);

crypto/testmgr.c

3998

pr_err("alg: sig: sign test failed: err %d\n", err);

crypto/testmgr.c

4006

pr_err("alg: sig: sign test failed: invalid output\n");

crypto/testmgr.c

4023

pr_err("alg: sig: test %d failed for %s: err %d\n",

crypto/testmgr.c

4039

pr_err("alg: sig: Failed to load tfm for %s: %ld\n",

drivers/accel/amdxdna/amdxdna_mailbox.c

502

pr_err("Ring buf size must be power of 2");

drivers/accel/habanalabs/common/device.c

2466

pr_err("Failed to initialize accel%d. Device %s is NOT usable!\n",

drivers/accel/habanalabs/common/device.c

635

pr_err("Closing FD after device was removed\n");

drivers/accel/habanalabs/common/habanalabs_drv.c

289

pr_err("Couldn't find device %d:%d\n",

drivers/accel/habanalabs/common/habanalabs_drv.c

402

pr_err("Preboot must be set along with other components");

drivers/accel/habanalabs/common/habanalabs_drv.c

424

pr_err("too many devices in the system\n");

drivers/accel/habanalabs/common/habanalabs_drv.c

526

pr_err("device pointer is NULL in suspend\n");

drivers/accel/habanalabs/common/habanalabs_drv.c

540

pr_err("device pointer is NULL in resume\n");

drivers/accel/habanalabs/common/habanalabs_drv.c

748

pr_err("unable to get major\n");

drivers/accel/habanalabs/common/habanalabs_drv.c

756

pr_err("failed to register pci device\n");

drivers/accessibility/speakup/serialio.c

139

pr_err("Unable to request Speakup serial I R Q\n");

drivers/accessibility/speakup/spk_ttyio.c

201

pr_err("speakup: Failed to set N_SPEAKUP on tty\n");

drivers/accessibility/speakup/spk_ttyio.c

29

pr_err("speakup: Invalid ser param. Must be between 0 and 191 inclusive.\n");

drivers/acpi/acpi_configfs.c

37

pr_err("table already loaded\n");

drivers/acpi/acpi_configfs.c

42

pr_err("invalid table length\n");

drivers/acpi/acpi_configfs.c

47

pr_err("invalid table signature\n");

drivers/acpi/acpi_configfs.c

71

pr_err("table not loaded\n");

drivers/acpi/acpi_dbg.c

429

pr_err("Failed to create AML debugger thread.\n");

drivers/acpi/acpi_dbg.c

505

pr_err("Failed to initialize debugger.\n");

drivers/acpi/acpi_fpdt.c

198

pr_err(FW_BUG "Zero-length record found in FPTD.\n");

drivers/acpi/acpi_fpdt.c

206

pr_err(FW_BUG "Invalid record %d for subtable %s\n",

drivers/acpi/acpi_fpdt.c

212

pr_err("Duplicate resume performance record found.\n");

drivers/acpi/acpi_fpdt.c

222

pr_err(FW_BUG "Invalid %d for subtable %s\n",

drivers/acpi/acpi_fpdt.c

227

pr_err("Duplicate suspend performance record found.\n");

drivers/acpi/acpi_fpdt.c

237

pr_err(FW_BUG "Invalid %d for subtable %s\n",

drivers/acpi/acpi_fpdt.c

243

pr_err("Duplicate boot performance record found.\n");

drivers/acpi/acpi_ipmi.c

624

pr_err("Can't register IPMI system interface watcher\n");

drivers/acpi/acpi_pcc.c

122

pr_err("PCC command executed timeout!\n");

drivers/acpi/acpi_pcc.c

70

pr_err("Failed to find PCC channel for subspace %d\n",

drivers/acpi/acpi_pcc.c

78

pr_err("This channel-%d does not support interrupt.\n",

drivers/acpi/acpi_watchdog.c

180

pr_err("Device creation failed: %pe\n", pdev);

drivers/acpi/apei/apei-base.c

501

pr_err(APEI_PFX

drivers/acpi/apei/apei-base.c

513

pr_err(APEI_PFX

drivers/acpi/apei/apei-base.c

524

pr_err(APEI_PFX "Fail to merge resources!\n");

drivers/acpi/apei/apei-base.c

564

pr_err(APEI_PFX "Fail to sub resources!\n");

drivers/acpi/apei/bert.c

138

pr_err("get table failed, %s.\n", acpi_format_exception(status));

drivers/acpi/apei/bert.c

144

pr_err(FW_BUG "table invalid.\n");

drivers/acpi/apei/bert.c

58

pr_err(FW_BUG "Truncated status block (length: %u).\n",

drivers/acpi/apei/bert.c

68

pr_err(FW_BUG "Invalid error record.\n");

drivers/acpi/apei/einj-core.c

1052

pr_err("Failed to get EINJ table: %s\n",

drivers/acpi/apei/einj-core.c

1081

pr_err("Error collecting EINJ resources.\n");

drivers/acpi/apei/einj-core.c

1087

pr_err("Error requesting memory/port resources.\n");

drivers/acpi/apei/einj-core.c

1093

pr_err("Error pre-mapping GARs.\n");

drivers/acpi/apei/einj-core.c

422

pr_err("Can not request [mem %#010llx-%#010llx] for Trigger table\n",

drivers/acpi/apei/einj-core.c

430

pr_err("Failed to map trigger table!\n");

drivers/acpi/apei/einj-core.c

453

pr_err("Can not request [mem %#010llx-%#010llx] for Trigger Table Entry\n",

drivers/acpi/apei/einj-core.c

461

pr_err("Failed to map trigger table!\n");

drivers/acpi/apei/erst-dbg.c

161

pr_err(ERST_DBG_PFX "Too long record to be written\n");

drivers/acpi/apei/erst.c

1211

pr_err("Failed to get table, %s\n", msg);

drivers/acpi/apei/erst.c

1218

pr_err(FW_BUG "ERST table is invalid.\n");

drivers/acpi/apei/erst.c

1240

pr_err("Failed to get Error Log Address Range.\n");

drivers/acpi/apei/erst.c

1246

pr_err("Can not request [mem %#010llx-%#010llx] for ERST.\n",

drivers/acpi/apei/erst.c

1276

pr_err(

drivers/acpi/apei/ghes.c

1720

pr_err(GHES_PFX "Failed to map GSI to IRQ for generic hardware error source: %d\n",

drivers/acpi/apei/ghes.c

1727

pr_err(GHES_PFX "Failed to register IRQ for generic hardware error source: %d\n",

drivers/acpi/apei/ghes.c

500

pr_err("%#llx: Sending SIGBUS to %s:%d due to hardware memory corruption\n",

drivers/acpi/apei/ghes.c

806

pr_err(FW_WARN "CXL CPER Invalid section length (%u)\n",

drivers/acpi/apei/ghes.c

812

pr_err(FW_WARN "CXL CPER invalid event\n");

drivers/acpi/apei/hest.c

301

pr_err(HEST_PFX "Failed to get table, %s\n", msg);

drivers/acpi/arm64/apmt.c

169

pr_err("Failed to get APMT table, %s\n", msg);

drivers/acpi/arm64/apmt.c

177

pr_err("Failed to initialize APMT platform devices, ret: %d\n", ret);

drivers/acpi/arm64/ffh.c

32

pr_err("%s: invalid SMCCC conduit\n", __func__);

drivers/acpi/arm64/gtdt.c

117

pr_err("Failed to map timer interrupt: invalid type.\n");

drivers/acpi/arm64/gtdt.c

145

pr_err("Failed to get c3stop info: invalid type.\n");

drivers/acpi/arm64/gtdt.c

192

pr_err(FW_BUG "limiting Platform Timer count to %d\n", cnt);

drivers/acpi/arm64/gtdt.c

214

pr_err(FW_BUG "GT block present, but frame count is zero.\n");

drivers/acpi/arm64/gtdt.c

219

pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",

drivers/acpi/arm64/gtdt.c

331

pr_err(FW_BUG "failed to get the Watchdog base address.\n");

drivers/acpi/arm64/gtdt.c

402

pr_err("Can't register timer %d\n", mmio_timer_count);

drivers/acpi/arm64/iort.c

1112

pr_err(FW_BUG "Invalid ID mapping, skipping RMR node %p\n",

drivers/acpi/arm64/iort.c

1567

pr_err("could not register gsi hwirq %d name [%s]\n", hwirq,

drivers/acpi/arm64/iort.c

2066

pr_err("iort node pointer overflows, bad table\n");

drivers/acpi/arm64/iort.c

2106

pr_err("Failed to get table, %s\n", msg);

drivers/acpi/arm64/iort.c

373

pr_err(FW_BUG "[map %p] conflicting mapping for input ID 0x%x\n",

drivers/acpi/arm64/iort.c

378

pr_err(FW_BUG "applying workaround.\n");

drivers/acpi/arm64/iort.c

409

pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",

drivers/acpi/arm64/iort.c

463

pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n",

drivers/acpi/arm64/iort.c

506

pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",

drivers/acpi/arm64/iort.c

841

pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n",

drivers/acpi/arm64/iort.c

959

pr_err(FW_BUG "RMR descriptor[0x%llx - 0x%llx] not aligned to 64K, continue with [0x%llx - 0x%llx]\n",

drivers/acpi/arm64/iort.c

985

pr_err(FW_BUG "RMR descriptor[0x%llx] with zero length, continue anyway\n",

drivers/acpi/arm64/iort.c

998

pr_err(FW_BUG "RMR descriptor[0x%llx - 0x%llx] overlaps, continue anyway\n",

drivers/acpi/arm64/mpam.c

326

pr_err("MSC entry overlaps end of ACPI table\n");

drivers/acpi/battery.c

757

pr_err("hook failed to load: %s", hook->name);

drivers/acpi/battery.c

810

pr_err("error in hook, unloading: %s",

drivers/acpi/bus.c

1317

pr_err("Unable to reallocate ACPI tables\n");

drivers/acpi/bus.c

1323

pr_err("Unable to initialize the ACPI Interpreter\n");

drivers/acpi/bus.c

1369

pr_err("Unable to enable ACPI\n");

drivers/acpi/bus.c

1399

pr_err("Unable to load the System Description Tables\n");

drivers/acpi/bus.c

1417

pr_err("Unable to start the ACPI Interpreter\n");

drivers/acpi/bus.c

1423

pr_err("Unable to initialize ACPI objects\n");

drivers/acpi/bus.c

1469

pr_err("Unable to register for system notifications\n");

drivers/acpi/bus.c

1504

pr_err("Failed to register kobject\n");

drivers/acpi/cppc_acpi.c

259

pr_err("PCC check channel failed for ss: %d. ret=%d\n",

drivers/acpi/cppc_acpi.c

346

pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n",

drivers/acpi/cppc_acpi.c

570

pr_err("Failed to find PCC channel for subspace %d\n",

drivers/acpi/ec.c

1615

pr_err("failed to remove space handler\n");

drivers/acpi/ec.c

1636

pr_err("failed to remove gpe handler\n");

drivers/acpi/ec.c

2050

pr_err(FW_BUG "Ignoring ECDT due to empty ID string\n");

drivers/acpi/ioapic.c

125

pr_err("cannot allocate memory for new IOAPIC\n");

drivers/acpi/nfit/intel.c

85

pr_err("%s: security state retrieval failed (%d:%#x)\n",

drivers/acpi/numa/srat.c

307

pr_err("SRAT: SRAT not used.\n");

drivers/acpi/numa/srat.c

374

pr_err("SRAT: Unexpected header length: %d\n",

drivers/acpi/numa/srat.c

391

pr_err("SRAT: Too many proximity domains.\n");

drivers/acpi/numa/srat.c

396

pr_err("SRAT: Failed to add memblk to node %u [mem %#010Lx-%#010Lx]\n",

drivers/acpi/numa/srat.c

448

pr_err("CFMWS: [BIOS BUG] base/size alignment violates spec\n");

drivers/acpi/numa/srat.c

463

pr_err("ACPI NUMA: Too many proximity domains while processing CFMWS.\n");

drivers/acpi/numa/srat.c

551

pr_err("SRAT: Too many proximity domains.\n");

drivers/acpi/osl.c

1105

pr_err("Kernel thread creation failed\n");

drivers/acpi/osl.c

1148

pr_err("Unsupported os_execute type %d.\n", type);

drivers/acpi/osl.c

1152

pr_err("Unable to queue work\n");

drivers/acpi/osl.c

1386

pr_err("Fatal opcode executed\n");

drivers/acpi/osl.c

214

pr_err("System description tables not found\n");

drivers/acpi/osl.c

332

pr_err("Cannot map memory that high: 0x%llx\n", phys);

drivers/acpi/osl.c

575

pr_err("SCI (ACPI GSI %d) not registered\n", gsi);

drivers/acpi/osl.c

583

pr_err("SCI (IRQ%d) allocation failed\n", irq);

drivers/acpi/pci_slot.c

114

pr_err("pci_create_slot returned %pe\n", pci_slot);

drivers/acpi/platform_profile.c

125

pr_err("Failed to get profile for handler %s\n", handler->name);

drivers/acpi/pmic/intel_pmic.c

368

pr_err("%s: Unexpected i2c-addr: 0x%02x (reg-addr 0x%x value 0x%x mask 0x%x)\n",

drivers/acpi/prmt.c

414

pr_err("PRM: EFI runtime services unavailable\n");

drivers/acpi/processor_idle.c

1268

pr_err("CPU%u: Invalid FFH LPI data\n", pr->id);

drivers/acpi/processor_pdc.c

62

pr_err("Memory allocation error\n");

drivers/acpi/processor_perflib.c

197

pr_err("Failed to add freq constraint for CPU%d (%d)\n",

drivers/acpi/processor_perflib.c

205

pr_err("Failed to update freq constraint for CPU%d (%d)\n",

drivers/acpi/processor_perflib.c

242

pr_err("Invalid _PCT data\n");

drivers/acpi/processor_perflib.c

255

pr_err("Invalid _PCT data (control_register)\n");

drivers/acpi/processor_perflib.c

270

pr_err("Invalid _PCT data (status_register)\n");

drivers/acpi/processor_perflib.c

334

pr_err("Invalid _PSS data\n");

drivers/acpi/processor_perflib.c

385

pr_err(FW_BUG

drivers/acpi/processor_perflib.c

403

pr_err(FW_BUG

drivers/acpi/processor_perflib.c

545

pr_err("Invalid _PSD data\n");

drivers/acpi/processor_perflib.c

551

pr_err("Invalid _PSD data\n");

drivers/acpi/processor_perflib.c

561

pr_err("Invalid _PSD data\n");

drivers/acpi/processor_perflib.c

567

pr_err("Unknown _PSD:num_entries\n");

drivers/acpi/processor_perflib.c

573

pr_err("Unknown _PSD:revision\n");

drivers/acpi/processor_perflib.c

581

pr_err("Invalid _PSD:coord_type\n");

drivers/acpi/processor_thermal.c

177

pr_err("Failed to add freq constraint for CPU%d (%d)\n",

drivers/acpi/processor_throttling.c

422

pr_err("Invalid _PTC data\n");

drivers/acpi/processor_throttling.c

436

pr_err("Invalid _PTC data (control_register)\n");

drivers/acpi/processor_throttling.c

452

pr_err("Invalid _PTC data (status_register)\n");

drivers/acpi/processor_throttling.c

464

pr_err("Invalid _PTC control register\n");

drivers/acpi/processor_throttling.c

471

pr_err("Invalid _PTC status register\n");

drivers/acpi/processor_throttling.c

505

pr_err("Invalid _TSS data\n");

drivers/acpi/processor_throttling.c

543

pr_err("Invalid _TSS data: freq is zero\n");

drivers/acpi/processor_throttling.c

583

pr_err("Invalid _TSD data\n");

drivers/acpi/processor_throttling.c

589

pr_err("Invalid _TSD data\n");

drivers/acpi/processor_throttling.c

602

pr_err("Invalid _TSD data\n");

drivers/acpi/processor_throttling.c

608

pr_err("Unknown _TSD:num_entries\n");

drivers/acpi/processor_throttling.c

614

pr_err("Unknown _TSD:revision\n");

drivers/acpi/processor_throttling.c

707

pr_err("HARDWARE addr space,NOT supported yet\n");

drivers/acpi/processor_throttling.c

727

pr_err("HARDWARE addr space,NOT supported yet\n");

drivers/acpi/processor_throttling.c

739

pr_err("HARDWARE addr space,NOT supported yet\n");

drivers/acpi/processor_throttling.c

745

pr_err("HARDWARE addr space,NOT supported yet\n");

drivers/acpi/processor_throttling.c

776

pr_err("Unknown addr space %d\n",

drivers/acpi/processor_throttling.c

809

pr_err("Unknown addr space %d\n",

drivers/acpi/riscv/rimt.c

195

pr_err("Could not find IOMMU node in RIMT\n");

drivers/acpi/riscv/rimt.c

321

pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",

drivers/acpi/riscv/rimt.c

378

pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",

drivers/acpi/riscv/rimt.c

522

pr_err("Failed to get table, %s\n", msg);

drivers/acpi/sbshc.c

114

pr_err("host controller is not configured\n");

drivers/acpi/sbshc.c

250

pr_err("error obtaining _EC.\n");

drivers/acpi/scan.c

1404

pr_err("%s: Error reading device info\n", __func__);

drivers/acpi/sleep.c

580

pr_err("ACPI does not support sleep state S%u\n", acpi_state);

drivers/acpi/spcr.c

109

pr_err(FW_BUG "Unacceptable wide SPCR Access Width. Defaulting to byte size\n");

drivers/acpi/spcr.c

114

pr_err(FW_BUG "Unexpected SPCR Access Width. Defaulting to byte size\n");

drivers/acpi/sysfs.c

1018

pr_err("Enabling force_remove is not supported anymore. Please report to linux-acpi@vger.kernel.org if you depend on this functionality\n");

drivers/acpi/sysfs.c

167

pr_err("%s: string parameter too long\n", kp->name);

drivers/acpi/sysfs.c

997

pr_err("Unable to add hotplug profile '%s'\n", name);

drivers/acpi/tables.c

451

pr_err("ACPI OVERRIDE: Table smaller than ACPI header [%s%s]\n",

drivers/acpi/tables.c

463

pr_err("ACPI OVERRIDE: Unknown signature [%s%s]\n",

drivers/acpi/tables.c

468

pr_err("ACPI OVERRIDE: File length does not match table length [%s%s]\n",

drivers/acpi/tables.c

473

pr_err("ACPI OVERRIDE: Bad table checksum [%s%s]\n",

drivers/acpi/viot.c

120

pr_err("Could not find MMIO IOMMU\n");

drivers/acpi/viot.c

203

pr_err(FW_BUG "Invalid PCI node size\n");

drivers/acpi/viot.c

217

pr_err(FW_BUG "Invalid MMIO node size\n");

drivers/acpi/viot.c

288

pr_err("Failed to get table, %s\n", msg);

drivers/acpi/viot.c

67

pr_err(FW_BUG "Node pointer overflows\n");

drivers/acpi/viot.c

71

pr_err(FW_BUG "Empty node\n");

drivers/acpi/viot.c

86

pr_err("Could not find PCI IOMMU\n");

drivers/acpi/x86/blacklist.c

54

pr_err("Vendor \"%6.6s\" System \"%8.8s\" Revision 0x%x has a known ACPI BIOS problem.\n",

drivers/acpi/x86/blacklist.c

59

pr_err("Reason: %s. This is a %s error\n",

drivers/acpi/x86/cmos_rtc.c

63

pr_err("Error installing CMOS-RTC region handler\n");

drivers/acpi/x86/cmos_rtc.c

75

pr_err("Error removing CMOS-RTC region handler\n");

drivers/android/binder.c

2060

pr_err("transaction release %d bad object at offset %lld, size %zd\n",

drivers/android/binder.c

2074

pr_err("transaction release %d bad node %016llx\n",

drivers/android/binder.c

2096

pr_err("transaction release %d bad handle %d, ret = %d\n",

drivers/android/binder.c

2148

pr_err("transaction release %d bad parent offset\n",

drivers/android/binder.c

2154

pr_err("transaction release %d invalid number of fds (%lld)\n",

drivers/android/binder.c

2161

pr_err("transaction release %d not enough space for %lld fds in buffer\n",

drivers/android/binder.c

2198

pr_err("transaction release %d bad object type %x\n",

drivers/android/binder.c

4278

pr_err("BC_ATTEMPT_ACQUIRE not supported\n");

drivers/android/binder.c

4281

pr_err("BC_ACQUIRE_RESULT not supported\n");

drivers/android/binder.c

4592

pr_err("%d:%d unknown command %u\n",

drivers/android/binder.c

5024

pr_err("%d:%d: bad work type %d\n",

drivers/android/binder.c

5240

pr_err("unexpected work type, %d, not freed\n",

drivers/android/binder.c

5517

pr_err("BINDER_SET_CONTEXT_MGR already set\n");

drivers/android/binder.c

5525

pr_err("BINDER_SET_CONTEXT_MGR bad uid %d != %d\n",

drivers/android/binder.c

6040

pr_err("%s: %d %lx-%lx %s failed %d\n", __func__,

drivers/android/binder.c

836

pr_err("invalid inc strong node for %d\n",

drivers/android/binder_alloc.c

340

pr_err("%d: failed to find page at offset %lx\n",

drivers/android/binder_alloc.c

352

pr_err("%d: %s failed to insert page at offset %lx with %d\n",

drivers/ata/pata_gayle.c

147

pr_err(DRV_NAME ": resources busy\n");

drivers/ata/pata_parport/pata_parport.c

651

pr_err("invalid port name %s\n", port);

drivers/ata/pata_parport/pata_parport.c

660

pr_err("protocol %s not found\n", protocol);

drivers/ata/pata_parport/pata_parport.c

674

pr_err("no such port %s\n", port);

drivers/ata/pata_parport/pata_parport.c

779

pr_err("failed to register pata_parport bus, error: %d\n", error);

drivers/ata/pata_parport/pata_parport.c

785

pr_err("failed to register pata_parport bus, error: %d\n", error);

drivers/ata/pata_parport/pata_parport.c

791

pr_err("unable to create sysfs file, error: %d\n", error);

drivers/ata/pata_parport/pata_parport.c

797

pr_err("unable to create sysfs file, error: %d\n", error);

drivers/ata/pata_parport/pata_parport.c

803

pr_err("unable to register parport driver, error: %d\n", error);

drivers/ata/sata_rcar.c

190

pr_err("%s timeout\n", __func__);

drivers/atm/nicstar.c

535

pr_err("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);

drivers/auxdisplay/ks0108.c

123

pr_err("ERROR: parport didn't register new device\n");

drivers/auxdisplay/ks0108.c

127

pr_err("could not claim access to parport %i. Aborting.\n",

drivers/auxdisplay/ks0108.c

147

pr_err("%s: already unregistered.\n", KS0108_NAME);

drivers/auxdisplay/panel.c

1609

pr_err("panel driver disabled.\n");

drivers/auxdisplay/panel.c

1617

pr_err("%s: port->number=%d parport=%d, already registered!\n",

drivers/auxdisplay/panel.c

1628

pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n",

drivers/auxdisplay/panel.c

1634

pr_err("could not claim access to parport%d. Aborting.\n",

drivers/auxdisplay/panel.c

1673

pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n",

drivers/base/arch_numa.c

283

pr_err("NUMA init failed\n");

drivers/base/arch_numa.c

365

pr_err("node_to_cpumask_map[%i] NULL\n", node);

drivers/base/arch_topology.c

309

pr_err("cpu_capacity: missing %pOF raw capacity\n",

drivers/base/arch_topology.c

311

pr_err("cpu_capacity: partial information: fallback to 1024 for all CPUs\n");

drivers/base/arch_topology.c

355

pr_err("cpu_capacity: CPU%d missing/invalid highest performance.\n", cpu);

drivers/base/arch_topology.c

356

pr_err("cpu_capacity: partial information: fallback to 1024 for all CPUs\n");

drivers/base/arch_topology.c

524

pr_err("%pOF: Can't get CPU for thread\n", t);

drivers/base/arch_topology.c

535

pr_err("%pOF: Core has both threads and CPU\n",

drivers/base/arch_topology.c

544

pr_err("%pOF: Can't get CPU for leaf core\n", core);

drivers/base/arch_topology.c

596

pr_err("%pOF: cpu-map children should be clusters\n", c);

drivers/base/arch_topology.c

605

pr_err("%pOF: Non-leaf cluster with core %s\n",

drivers/base/arch_topology.c

666

pr_err("No CPU information found in DT\n");

drivers/base/arch_topology.c

956

pr_err("Early cacheinfo failed, ret = %d\n", ret);

drivers/base/auxiliary.c

286

pr_err("auxiliary_device has a NULL dev->parent\n");

drivers/base/auxiliary.c

291

pr_err("auxiliary_device has a NULL name\n");

drivers/base/bus.c

1477

pr_err("%s: failed to create and add kset 'bus'\n", __func__);

drivers/base/cacheinfo.c

260

pr_err("Failed to find cpu%d device node\n", cpu);

drivers/base/class.c

187

pr_err("%s: class '%s' does not have namespace\n",

drivers/base/class.c

192

pr_err("%s: class '%s' does not have ns_type\n",

drivers/base/container.c

40

pr_err("%s() failed: %d\n", __func__, ret);

drivers/base/cpu.c

680

pr_err("Unable to register CPU vulnerabilities\n");

drivers/base/devtmpfs.c

481

pr_err("unable to create devtmpfs %ld\n", PTR_ERR(mnt));

drivers/base/devtmpfs.c

487

pr_err("unable to configure devtmpfs type %d\n", err);

drivers/base/devtmpfs.c

493

pr_err("unable to register devtmpfs type %d\n", err);

drivers/base/devtmpfs.c

506

pr_err("unable to create devtmpfs %d\n", err);

drivers/base/driver.c

231

pr_err("Driver '%s' was unable to register with bus_type '%s' because the bus was not initialized.\n",

drivers/base/driver.c

244

pr_err("Error: Driver '%s' is already registered, "

drivers/base/faux.c

160

pr_err("%s: device_add for faux device '%s' failed with %d\n",

drivers/base/platform.c

1082

pr_err("failed to register platform driver %ps: %d\n",

drivers/base/platform.c

959

pr_err("%s: drivers registered with %s can not be probed asynchronously\n",

drivers/base/power/clock_ops.c

102

pr_err("%s: atomic context with clock_ops_might_sleep = %d",

drivers/base/power/trace.c

124

pr_err("Unable to read current time from RTC\n");

drivers/base/syscore.c

77

pr_err("PM: System core suspend callback %pS failed.\n",

drivers/base/test/test_async_driver_probe.c

121

pr_err("failed to create async_dev: %d\n", err);

drivers/base/test/test_async_driver_probe.c

132

pr_err("Failed to register async_driver: %d\n", err);

drivers/base/test/test_async_driver_probe.c

139

pr_err("test failed: probe took too long\n");

drivers/base/test/test_async_driver_probe.c

156

pr_err("failed to create async_dev: %d\n", err);

drivers/base/test/test_async_driver_probe.c

184

pr_err("failed to create sync_dev: %d\n", err);

drivers/base/test/test_async_driver_probe.c

194

pr_err("Failed to register async_driver: %d\n", err);

drivers/base/test/test_async_driver_probe.c

217

pr_err("failed to create sync_dev: %d\n", err);

drivers/base/test/test_async_driver_probe.c

244

pr_err("async events still pending, forcing timeout\n");

drivers/base/test/test_async_driver_probe.c

274

pr_err("Test failed with %d errors and %d warnings\n",

drivers/bcma/driver_pci_host.c

544

pr_err("PCI: BCMA bridge enable failed\n");

drivers/bcma/driver_pci_host.c

573

pr_err("PCI: Problem fixing up the addresses on %s\n",

drivers/bcma/main.c

682

pr_err("SoC host initialization failed\n");

drivers/bcma/main.c

688

pr_err("PCI host initialization failed\n");

drivers/bcma/sprom.c

169

pr_err("Unsupported SPROM revision: %d\n", revision);

drivers/block/aoe/aoeblk.c

297

pr_err("aoe: disk not up\n");

drivers/block/aoe/aoeblk.c

373

pr_err("aoe: cannot allocate tag set for %ld.%d\n",

drivers/block/aoe/aoeblk.c

380

pr_err("aoe: cannot allocate block queue for %ld.%d\n",

drivers/block/aoe/aoechr.c

106

pr_err("aoe: invalid device specification %s\n", buf);

drivers/block/aoe/aoecmd.c

1111

pr_err("aoe: ata error cmd=%2.2Xh stat=%2.2Xh from e%ld.%d\n",

drivers/block/aoe/aoecmd.c

1124

pr_err("%s e%ld.%d. skb->len=%d need=%ld\n",

drivers/block/aoe/aoecmd.c

1518

pr_err("aoe: device setifbcnt failure; too many interfaces.\n");

drivers/block/aoe/aoecmd.c

597

pr_err("%s %pm for e%ld.%d: %s\n",

drivers/block/aoe/aoecmd.c

874

pr_err("aoe: nextbuf: unable to mempool_alloc!\n");

drivers/block/aoe/aoedev.c

72

pr_err("aoe: %s %d slots per shelf\n",

drivers/block/aoe/aoedev.c

81

pr_err("aoe: %s with e%ld.%d\n",

drivers/block/aoe/aoedev.c

90

pr_err("aoe: %s %lu\n",

drivers/block/drbd/drbd_main.c

2828

pr_err("invalid minor_count (%d)\n", drbd_minor_count);

drivers/block/drbd/drbd_main.c

2838

pr_err("unable to register block device major %d\n",

drivers/block/drbd/drbd_main.c

2851

pr_err("unable to register generic netlink family\n");

drivers/block/drbd/drbd_main.c

2862

pr_err("unable to register proc file\n");

drivers/block/drbd/drbd_main.c

2868

pr_err("unable to create retry workqueue\n");

drivers/block/drbd/drbd_main.c

2887

pr_err("ran out of memory\n");

drivers/block/drbd/drbd_main.c

2889

pr_err("initialization failure\n");

drivers/block/drbd/drbd_nl.c

4843

pr_err("Error %d sending event. Event seq:%u\n", err, seq);

drivers/block/drbd/drbd_nl.c

92

pr_err("error sending genl reply\n");

drivers/block/mtip32xx/mtip32xx.c

4025

pr_err("Unable to register block device (%d)\n",

drivers/block/n64cart.c

125

pr_err("start or size not specified\n");

drivers/block/n64cart.c

130

pr_err("size must be a multiple of 4K\n");

drivers/block/nbd.c

2093

pr_err("illegal input index %d\n", index);

drivers/block/nbd.c

2098

pr_err("must specify at least one socket\n");

drivers/block/nbd.c

2102

pr_err("must specify a size in bytes for the device\n");

drivers/block/nbd.c

2116

pr_err("device at index %d is going down\n",

drivers/block/nbd.c

2127

pr_err("failed to add new device\n");

drivers/block/nbd.c

2138

pr_err("nbd%d already in use\n", index);

drivers/block/nbd.c

2146

pr_err("couldn't allocate config\n");

drivers/block/nbd.c

2201

pr_err("socks must be embedded in a SOCK_ITEM attr\n");

drivers/block/nbd.c

2210

pr_err("error processing sock list\n");

drivers/block/nbd.c

2284

pr_err("must specify an index to disconnect\n");

drivers/block/nbd.c

2292

pr_err("couldn't find device at index %d\n", index);

drivers/block/nbd.c

2297

pr_err("device at index %d is going down\n", index);

drivers/block/nbd.c

2322

pr_err("must specify a device to reconfigure\n");

drivers/block/nbd.c

2330

pr_err("couldn't find a device at index %d\n", index);

drivers/block/nbd.c

2351

pr_err("device at index %d is going down\n", index);

drivers/block/nbd.c

2415

pr_err("socks must be embedded in a SOCK_ITEM attr\n");

drivers/block/nbd.c

2424

pr_err("error processing sock list\n");

drivers/block/nbd.c

2650

pr_err("max_part must be >= 0\n");

drivers/block/nbd.c

2729

pr_err("possibly leaking nbd_config (ref %d)\n",

drivers/block/nbd.c

2732

pr_err("possibly leaking a device\n");

drivers/block/null_blk/main.c

1888

pr_err("legacy IO path is no longer available\n");

drivers/block/null_blk/main.c

1892

pr_err("BIO-based IO path is no longer available, using blk-mq instead.\n");

drivers/block/null_blk/main.c

1921

pr_err("zone_size must be power-of-two\n");

drivers/block/null_blk/main.c

2138

pr_err("invalid home_node value\n");

drivers/block/null_blk/main.c

2146

pr_err("legacy IO path is no longer available\n");

drivers/block/null_blk/null_blk.h

158

pr_err("CONFIG_BLK_DEV_ZONED not enabled\n");

drivers/block/null_blk/zoned.c

60

pr_err("zone_size must be power-of-two\n");

drivers/block/null_blk/zoned.c

64

pr_err("Zone size larger than device capacity\n");

drivers/block/null_blk/zoned.c

72

pr_err("zone capacity (%lu MB) larger than zone size (%lu MB)\n",

drivers/block/null_blk/zoned.c

786

pr_err("null_blk device is not zoned\n");

drivers/block/null_blk/zoned.c

791

pr_err("null_blk device is not yet powered\n");

drivers/block/null_blk/zoned.c

801

pr_err("Sector out of range\n");

drivers/block/null_blk/zoned.c

806

pr_err("Can not change condition of conventional zones\n");

drivers/block/null_blk/zoned.c

84

pr_err("A smaller last zone is not allowed with zone capacity smaller than zone size.\n");

drivers/block/ps3vram.c

824

pr_err("%s: register_blkdev failed %d\n", DEVICE_NAME, error);

drivers/block/rbd.c

7255

pr_err("dev_id out of range\n");

drivers/block/rbd.c

7262

pr_err("bad remove option at '%s'\n", opt_buf);

drivers/block/rnbd/rnbd-clt-sysfs.c

101

pr_err("map_device: sessname too long\n");

drivers/block/rnbd/rnbd-clt-sysfs.c

112

pr_err("map_device: too many (> %zu) paths provided\n",

drivers/block/rnbd/rnbd-clt-sysfs.c

127

pr_err("Can't parse path %s: %d\n", p, ret);

drivers/block/rnbd/rnbd-clt-sysfs.c

144

pr_err("map_device: Device path too long\n");

drivers/block/rnbd/rnbd-clt-sysfs.c

156

pr_err("bad destination port number parameter '%d'\n",

drivers/block/rnbd/rnbd-clt-sysfs.c

178

pr_err("map_device: Invalid access_mode: '%s'\n",

drivers/block/rnbd/rnbd-clt-sysfs.c

191

pr_err("bad nr_poll_queues parameter '%d'\n",

drivers/block/rnbd/rnbd-clt-sysfs.c

202

pr_err("map_device: Unknown parameter or missing value '%s'\n",

drivers/block/rnbd/rnbd-clt-sysfs.c

213

pr_err("map_device: Parameters missing\n");

drivers/block/rnbd/rnbd-clt.c

1256

pr_err("Session %s not found, and path parameter not given", sessname);

drivers/block/rnbd/rnbd-clt.c

127

pr_err("Failed to set new size of the device, device is not opened\n");

drivers/block/rnbd/rnbd-clt.c

1432

pr_err("Failed to initialize device '%s' from session %s, allocating idr failed, err: %d\n",

drivers/block/rnbd/rnbd-clt.c

1557

pr_err("map_device: failed to map device '%s' from session %s, can't initialize device, err: %pe\n",

drivers/block/rnbd/rnbd-clt.c

1804

pr_err("Failed to load module, block device registration failed\n");

drivers/block/rnbd/rnbd-clt.c

1810

pr_err("Failed to load module, creating sysfs device files failed, err: %d\n",

drivers/block/rnbd/rnbd-clt.c

1817

pr_err("Failed to load module, alloc_workqueue failed.\n");

drivers/block/rnbd/rnbd-clt.c

671

pr_err("send_msg_sess_info(\"%s\"): %d\n", sess->sessname, err);

drivers/block/rnbd/rnbd-clt.c

677

pr_err("rtrs_clt_query(\"%s\"): %d\n", sess->sessname, err);

drivers/block/rnbd/rnbd-clt.c

718

pr_err("Unknown session event received (%d), session: %s\n",

drivers/block/rnbd/rnbd-log.h

24

rnbd_clt_log(pr_err, dev, fmt, ##__VA_ARGS__)

drivers/block/rnbd/rnbd-log.h

33

rnbd_srv_log(pr_err, dev, fmt, ##__VA_ARGS__)

drivers/block/rnbd/rnbd-srv.c

286

pr_err("rtrs_srv_get_path_name(%s): %d\n", pathname, err);

drivers/block/rnbd/rnbd-srv.c

495

pr_err("Mapping device '%s' for session %s with RW permissions failed. Device already opened as 'RW' by %d client(s), access mode %s.\n",

drivers/block/rnbd/rnbd-srv.c

506

pr_err("Mapping device '%s' for session %s with migration permissions failed. Device already opened as 'RW' by %d client(s), access mode %s.\n",

drivers/block/rnbd/rnbd-srv.c

514

pr_err("Received mapping request for device '%s' on session %s with invalid access mode: %d\n",

drivers/block/rnbd/rnbd-srv.c

627

pr_err("Too long path: %s, %s, %s\n",

drivers/block/rnbd/rnbd-srv.c

717

pr_err("Opening device for session %s failed, device path too long. '%s/%s' is longer than PATH_MAX (%d)\n",

drivers/block/rnbd/rnbd-srv.c

724

pr_err("Opening device for session %s failed, device path %s contains relative path ..\n",

drivers/block/rnbd/rnbd-srv.c

732

pr_err("Opening device '%s' for client %s failed, failed to get device full path, err: %pe\n",

drivers/block/rnbd/rnbd-srv.c

740

pr_err("Opening device '%s' on session %s failed, failed to open the block device, err: %pe\n",

drivers/block/rnbd/rnbd-srv.c

748

pr_err("Opening device '%s' on session %s failed, creating srv_dev failed, err: %pe\n",

drivers/block/rnbd/rnbd-srv.c

759

pr_err("Opening device '%s' on session %s failed, creating sess_dev failed, err: %pe\n",

drivers/block/rnbd/rnbd-srv.c

841

pr_err("rtrs_srv_open(), err: %pe\n", rtrs_ctx);

drivers/block/rnbd/rnbd-srv.c

847

pr_err("rnbd_srv_create_sysfs_files(), err: %d\n", err);

drivers/block/sunvdc.c

1180

pr_err(PFX "%s vio_ldc_alloc:%d\n", port->disk_name, err);

drivers/block/sunvdc.c

1186

pr_err(PFX "%s vio_alloc_tx_ring:%d\n", port->disk_name, err);

drivers/block/z2ram.c

78

pr_err(DEVICE_NAME ": bad access: block=%llu, "

drivers/block/zloop.c

1007

pr_err("Invalid number of conventional zones %u\n",

drivers/block/zloop.c

1101

pr_err("blk_mq_alloc_tag_set failed (err=%d)\n", ret);

drivers/block/zloop.c

1107

pr_err("blk_mq_alloc_disk failed (err=%d)\n", ret);

drivers/block/zloop.c

1123

pr_err("add_disk failed (err=%d)\n", ret);

drivers/block/zloop.c

1177

pr_err("No ID specified for remove\n");

drivers/block/zloop.c

1182

pr_err("Invalid option specified for remove\n");

drivers/block/zloop.c

1264

pr_err("Invalid capacity\n");

drivers/block/zloop.c

1278

pr_err("Invalid zone size %u\n", token);

drivers/block/zloop.c

1291

pr_err("Invalid zone capacity\n");

drivers/block/zloop.c

1320

pr_err("Invalid number of queues\n");

drivers/block/zloop.c

1332

pr_err("Invalid queue depth\n");

drivers/block/zloop.c

1347

pr_err("Invalid zone_append value\n");

drivers/block/zloop.c

1366

pr_err("Invalid capacity\n");

drivers/block/zloop.c

1371

pr_err("Invalid zone capacity\n");

drivers/block/zloop.c

1413

pr_err("Invalid operation\n");

drivers/block/zloop.c

1428

pr_err("Failed to parse options\n");

drivers/block/zloop.c

1440

pr_err("Invalid operation\n");

drivers/block/zloop.c

1506

pr_err("Failed to register misc device: %d\n", ret);

drivers/block/zloop.c

168

pr_err("Failed to get zone %u file stat (err=%d)\n",

drivers/block/zloop.c

176

pr_err("Zone %u file too large (%llu sectors > %llu)\n",

drivers/block/zloop.c

182

pr_err("Zone %u file size not aligned to block size %u\n",

drivers/block/zloop.c

463

pr_err("Zone %u: unaligned write: sect %llu, wp %llu\n",

drivers/block/zloop.c

599

pr_err("Unsupported operation %d\n", req_op(rq));

drivers/block/zloop.c

628

pr_err("Zone %u: failed read sector %llu, %llu sectors\n",

drivers/block/zloop.c

642

pr_err("Zone %u: failed %swrite sector %llu, %llu sectors\n",

drivers/block/zloop.c

648

pr_err("Zone %u: partial write %ld/%u B\n",

drivers/block/zloop.c

874

pr_err("Zone capacity is not aligned to block size %u\n",

drivers/block/zloop.c

910

pr_err("Failed to open zone %u file %s/%u/cnv-%06u (err=%ld)",

drivers/block/zloop.c

924

pr_err("Failed to get zone %u file stat\n", zone_no);

drivers/block/zloop.c

930

pr_err("Invalid conventional zone %u file size (%llu sectors != %llu)\n",

drivers/block/zloop.c

938

pr_err("Failed to truncate zone %u file (err=%d)\n",

drivers/block/zloop.c

950

pr_err("Failed to open zone %u file %s/%u/seq-%06u (err=%ld)",

drivers/block/zram/zcomp.c

177

pr_err("Can't allocate a compression stream\n");

drivers/block/zram/zram_drv.c

2153

pr_err("Decompression failed! err=%d, page=%u\n", ret, index);

drivers/block/zram/zram_drv.c

2265

pr_err("Compression failed! err=%d\n", ret);

drivers/block/zram/zram_drv.c

2902

pr_err("Cannot initialise %s compressing backend\n",

drivers/block/zram/zram_drv.c

3089

pr_err("Error allocating disk structure for device %d\n",

drivers/block/zram/zram_drv.c

3271

pr_err("Unable to register zram-control class\n");

drivers/block/zram/zram_drv.c

3279

pr_err("Unable to get major number\n");

drivers/bus/brcmstb_gisb.c

438

pr_err("failed to look up compatible string\n");

drivers/bus/fsl-mc/fsl-mc-bus.c

1251

pr_err("bus type registration failed: %d\n", error);

drivers/bus/fsl-mc/fsl-mc-bus.c

1257

pr_err("platform_driver_register() failed: %d\n", error);

drivers/bus/fsl-mc/fsl-mc-bus.c

490

pr_err("driver_register() failed for %s: %d\n",

drivers/bus/imx-weim.c

319

pr_err("%s: could not find platform device for '%pOF'\n",

drivers/bus/imx-weim.c

357

pr_err("Could not find platform device for '%pOF'\n",

drivers/bus/mips_cdmm.c

412

pr_err("cdmm%u: Failed to choose a physical base\n",

drivers/bus/moxtet.c

859

pr_err("moxtet bus registration failed: %d\n", ret);

drivers/bus/moxtet.c

865

pr_err("moxtet spi driver registration failed: %d\n", ret);

drivers/bus/mvebu-mbus.c

1142

pr_err("could not find a matching SoC family\n");

drivers/bus/mvebu-mbus.c

1172

pr_err("cannot add window '%04x:%04x', conflicts with another window\n",

drivers/bus/mvebu-mbus.c

1179

pr_err("cannot add window '%04x:%04x', too many windows\n",

drivers/bus/mvebu-mbus.c

1259

pr_err("could not find a matching SoC family\n");

drivers/bus/mvebu-mbus.c

1267

pr_err("required 'controller' property missing\n");

drivers/bus/mvebu-mbus.c

1273

pr_err("could not find an 'mbus-controller' node\n");

drivers/bus/mvebu-mbus.c

1278

pr_err("cannot get MBUS register address\n");

drivers/bus/mvebu-mbus.c

1283

pr_err("cannot get SDRAM register address\n");

drivers/bus/mvebu-mbus.c

885

pr_err("cannot add window '%x:%x', conflicts with another window\n",

drivers/bus/mvebu-mbus.c

939

pr_err("missing DRAM information\n");

drivers/bus/mvebu-mbus.c

955

pr_err("invalid dram address %pa\n", &phyaddr);

drivers/bus/omap_l3_smx.c

147

pr_err("%s seen by %s %s at address %x\n",

drivers/bus/stm32_firewall.c

50

pr_err("Unable to get access-controllers property for node %s\n, err: %d",

drivers/bus/stm32_firewall.c

57

pr_err("Too many firewall controllers");

drivers/bus/stm32_firewall.c

78

pr_err("No firewall controller registered for %s\n", np->full_name);

drivers/bus/sunxi-rsb.c

847

pr_err("failed to register sunxi sunxi_rsb bus: %d\n", ret);

drivers/cache/ax45mp_cache.c

155

pr_err("Failed to get cache-line-size, defaulting to 64 bytes\n");

drivers/cache/ax45mp_cache.c

160

pr_err("Expected cache-line-size to be 64 bytes (found:%u)\n",

drivers/cache/sifive_ccache.c

213

pr_err("DirError @ 0x%08X.%08X\n", add_h, add_l);

drivers/cache/sifive_ccache.c

233

pr_err("DataError @ 0x%08X.%08X\n", add_h, add_l);

drivers/cache/sifive_ccache.c

243

pr_err("DataFail @ 0x%08X.%08X\n", add_h, add_l);

drivers/cdrom/cdrom.c

783

pr_err("failed setting lba address space\n");

drivers/cdrom/gdrom.c

445

pr_err("Unknown sense key: %d\n", sense_key);

drivers/cdx/cdx.c

670

pr_err("driver_register() failed for %s: %d\n",

drivers/cdx/controller/mcdi.c

494

pr_err("MC command 0x%x inlen %zu timed out (sync)\n",

drivers/cdx/controller/mcdi.c

601

pr_err("Got empty MC response\n");

drivers/cdx/controller/mcdi.c

623

pr_err("MC response unexpected for seq : %0X\n", respseq);

drivers/cdx/controller/mcdi.c

756

pr_err("MC command 0x%x inlen %zu state %d timed out after %u ms\n",

drivers/cdx/controller/mcdi.c

845

pr_err("MC command 0x%x inlen %d failed err_no=%d (raw=%d) arg=%d\n",

drivers/char/hw_random/amd-rng.c

172

pr_err(DRV_NAME "Cannot map ioport\n");

drivers/char/hw_random/amd-rng.c

184

pr_err(DRV_NAME " registering failed (%d)\n", err);

drivers/char/hw_random/cavium-rng-vf.c

182

pr_err("Cannot find RNG PF device\n");

drivers/char/hw_random/core.c

123

pr_err("hwrng_fill thread creation failed\n");

drivers/char/hw_random/geode-rng.c

131

pr_err(PFX "RNG registering failed (%d)\n",

drivers/char/hw_random/histb-rng.c

70

pr_err("failed to generate random number, generated %d\n",

drivers/char/hw_random/ingenic-rng.c

66

pr_err("%s: Wait for RNG data ready timeout\n", __func__);

drivers/char/hw_random/ingenic-rng.c

94

pr_err("%s: Failed to map RNG registers\n", __func__);

drivers/char/hw_random/ingenic-trng.c

67

pr_err("%s: Wait for DTRNG data ready timeout\n", __func__);

drivers/char/hw_random/intel-rng.c

202

pr_err(PFX "cannot enable RNG, aborting\n");

drivers/char/hw_random/intel-rng.c

397

pr_err(PFX "RNG registering failed (%d)\n",

drivers/char/hw_random/via-rng.c

140

pr_err(PFX "can't enable hardware RNG "

drivers/char/hw_random/via-rng.c

179

pr_err(PFX "cannot enable VIA C3 RNG, aborting\n");

drivers/char/hw_random/via-rng.c

205

pr_err(PFX "RNG registering failed (%d)\n",

drivers/char/ipmi/ipmi_devintf.c

818

pr_err("ipmi_devintf: Unable to create the ipmi class device link\n");

drivers/char/ipmi/ipmi_devintf.c

869

pr_err("ipmi: can't get major %d\n", ipmi_major);

drivers/char/ipmi/ipmi_dmi.c

144

pr_err("Base address is zero, assuming no IPMI interface\n");

drivers/char/ipmi/ipmi_dmi.c

192

pr_err("Invalid offset: 0\n");

drivers/char/ipmi/ipmi_dmi.c

66

pr_err("Invalid IPMI type: %d\n", type);

drivers/char/ipmi/ipmi_msghandler.c

5600

pr_err("Could not register IPMI driver\n");

drivers/char/ipmi/ipmi_msghandler.c

5625

pr_err("unable to create ipmi-msghandler-remove-wq workqueue");

drivers/char/ipmi/ipmi_plat_data.c

50

pr_err("Error allocating IPMI platform device %s.%d\n",

drivers/char/ipmi/ipmi_poweroff.c

202

pr_err("Unable to send ATCA, IPMI error 0x%x\n", rv);

drivers/char/ipmi/ipmi_poweroff.c

279

pr_err("Unable to send ATCA powerdown message, IPMI error 0x%x\n",

drivers/char/ipmi/ipmi_poweroff.c

499

pr_err("Unable to send chassis power cycle message, IPMI error 0x%x\n",

drivers/char/ipmi/ipmi_poweroff.c

505

pr_err("Unable to send chassis power down message, IPMI error 0x%x\n",

drivers/char/ipmi/ipmi_poweroff.c

568

pr_err("could not create IPMI user, error %d\n", rv);

drivers/char/ipmi/ipmi_poweroff.c

590

pr_err("Unable to send IPMI get device id info, IPMI error 0x%x\n",

drivers/char/ipmi/ipmi_poweroff.c

596

pr_err("(chassis) IPMI get device id info too short, was %d bytes, needed %d bytes\n",

drivers/char/ipmi/ipmi_poweroff.c

617

pr_err("Unable to find a poweroff function that will work, giving up\n");

drivers/char/ipmi/ipmi_poweroff.c

679

pr_err("Unable to register powercycle sysctl\n");

drivers/char/ipmi/ipmi_poweroff.c

690

pr_err("Unable to register SMI watcher: %d\n", rv);

drivers/char/ipmi/ipmi_si_intf.c

2008

pr_err("IPMI interface added with no device\n");

drivers/char/ipmi/ipmi_si_pci.c

155

pr_err("Unable to register PCI driver: %d\n", rv);

drivers/char/ipmi/ipmi_si_platform.c

457

pr_err("Unable to register driver: %d\n", rv);

drivers/char/ipmi/ipmi_ssif.c

2133

pr_err("Couldn't add hardcoded device at addr 0x%x\n",

drivers/char/ipmi/ipmi_ssif.c

2144

pr_err("Unable to register driver: %d\n", rv);

drivers/char/ipmi/ipmi_watchdog.c

554

pr_err("Unable to restore the IPMI watchdog's settings, giving up\n");

drivers/char/ipmi/ipmi_watchdog.c

569

pr_err("Unable to send the command to set the watchdog's settings, giving up\n");

drivers/char/ipmi/ipmi_watchdog.c

883

pr_err("response: Error %x on cmd %x\n",

drivers/char/ipmi/kcs_bmc_cdev_ipmi.c

348

pr_err("channel=%u with too large data : %zu\n",

drivers/char/misc.c

216

pr_err("Invalid fixed minor %d for miscdevice '%s'\n",

drivers/char/misc.c

312

pr_err("unable to get major %d for misc devices\n", MISC_MAJOR);

drivers/char/nvram.c

516

pr_err("nvram: can't misc_register on minor=%d\n", NVRAM_MINOR);

drivers/char/nvram.c

522

pr_err("nvram: can't create /proc/driver/nvram\n");

drivers/char/ppdev.c

809

pr_err("Failed to create device parport%d\n",

drivers/char/toshiba.c

417

pr_err("toshiba: not a supported Toshiba laptop\n");

drivers/char/toshiba.c

433

pr_err("toshiba: not a supported Toshiba laptop\n");

drivers/char/tpm/eventlog/efi.c

39

pr_err("Could not map UEFI TPM log table !\n");

drivers/char/tpm/eventlog/efi.c

54

pr_err("Could not map UEFI TPM log table payload!\n");

drivers/char/tpm/eventlog/efi.c

79

pr_err("Could not map UEFI TPM final log\n");

drivers/char/tpm/tpm-interface.c

527

pr_err("couldn't create tpm class\n");

drivers/char/tpm/tpm-interface.c

533

pr_err("couldn't create tpmrm class\n");

drivers/char/tpm/tpm-interface.c

539

pr_err("tpm: failed to allocate char dev region\n");

drivers/char/tpm/tpm-interface.c

545

pr_err("tpm: failed to allocate char dev region\n");

drivers/char/tpm/tpm2-cmd.c

580

pr_err("tpm: out of bank capacity: %u > %u\n",

drivers/char/tpm/tpm_vtpm_proxy.c

693

pr_err("couldn't create workqueue\n");

drivers/char/tpm/tpm_vtpm_proxy.c

699

pr_err("couldn't create vtpmx device\n");

drivers/char/virtio_console.c

2197

pr_err("Error %d registering virtio driver\n", err);

drivers/char/virtio_console.c

2202

pr_err("Error %d registering virtio rproc serial driver\n",

drivers/clk/actions/owl-common.c

50

pr_err("failed to init regmap\n");

drivers/clk/analogbits/wrpll-cln28hpc.c

243

pr_err("%s: PLL input rate is out of range\n",

drivers/clk/aspeed/clk-aspeed.c

715

pr_err("no syscon regmap\n");

drivers/clk/aspeed/clk-aspeed.c

726

pr_err("failed to read strapping register\n");

drivers/clk/aspeed/clk-aspeed.c

735

pr_err("unknown platform, failed to add clocks\n");

drivers/clk/aspeed/clk-aspeed.c

738

pr_err("failed to add DT provider: %d\n", ret);

drivers/clk/aspeed/clk-ast2600.c

862

pr_err("no syscon regmap\n");

drivers/clk/aspeed/clk-ast2600.c

869

pr_err("failed to add DT provider: %d\n", ret);

drivers/clk/at91/clk-utmi.c

218

pr_err("UTMICK: unsupported main_xtal rate\n");

drivers/clk/at91/clk-utmi.c

75

pr_err("UTMICK: unsupported mainck rate\n");

drivers/clk/at91/clk-utmi.c

83

pr_err("UTMICK: sfr node required\n");

drivers/clk/at91/pmc.c

78

pr_err("%s: invalid type (%u) or index (%u)\n", __func__, type, idx);

drivers/clk/axs10x/pll_clock.c

274

pr_err("failed to map pll div registers\n");

drivers/clk/axs10x/pll_clock.c

280

pr_err("failed to map pll lock register\n");

drivers/clk/axs10x/pll_clock.c

294

pr_err("failed to register %pOFn clock\n", node);

drivers/clk/axs10x/pll_clock.c

300

pr_err("failed to add hw provider for %pOFn clock\n", node);

drivers/clk/baikal-t1/ccu-div.c

119

pr_err("Can't enable '%s' with no parent", clk_hw_get_name(hw));

drivers/clk/baikal-t1/ccu-div.c

135

pr_err("Divider '%s' lock timed out\n", clk_hw_get_name(hw));

drivers/clk/baikal-t1/ccu-div.c

275

pr_err("Divider '%s' lock timed out\n", clk_hw_get_name(hw));

drivers/clk/baikal-t1/ccu-pll.c

113

pr_err("Can't enable '%s' with no parent", clk_hw_get_name(hw));

drivers/clk/baikal-t1/ccu-pll.c

127

pr_err("PLL '%s' reset timed out\n", clk_hw_get_name(hw));

drivers/clk/baikal-t1/ccu-pll.c

269

pr_err("PLL '%s' reset timed out\n", clk_hw_get_name(hw));

drivers/clk/baikal-t1/ccu-rst.c

187

pr_err("Incompatible DT node '%s' specified\n",

drivers/clk/baikal-t1/ccu-rst.c

199

pr_err("Couldn't register '%s' reset controller\n",

drivers/clk/baikal-t1/clk-ccu-div.c

241

pr_err("Invalid DT node '%s' specified\n", of_node_full_name(np));

drivers/clk/baikal-t1/clk-ccu-div.c

251

pr_err("Invalid DT node '%s' specified\n", of_node_full_name(np));

drivers/clk/baikal-t1/clk-ccu-div.c

286

pr_err("Incompatible DT node '%s' specified\n",

drivers/clk/baikal-t1/clk-ccu-div.c

317

pr_err("Failed to find syscon regs for '%s'\n",

drivers/clk/baikal-t1/clk-ccu-div.c

385

pr_err("Couldn't register divider '%s' hw\n",

drivers/clk/baikal-t1/clk-ccu-div.c

423

pr_err("Couldn't register dividers '%s' clock provider\n",

drivers/clk/baikal-t1/clk-ccu-div.c

439

pr_err("Couldn't register divider '%s' reset controller\n",

drivers/clk/baikal-t1/clk-ccu-pll.c

121

pr_err("Failed to find syscon regs for '%s'\n",

drivers/clk/baikal-t1/clk-ccu-pll.c

176

pr_err("Couldn't register PLL hw '%s'\n",

drivers/clk/baikal-t1/clk-ccu-pll.c

214

pr_err("Couldn't register PLL provider of '%s'\n",

drivers/clk/bcm/clk-bcm53573-ilp.c

141

pr_err("Failed to init ILP clock: %d\n", err);

drivers/clk/bcm/clk-iproc-pll.c

337

pr_err("%s: pll: %s has invalid rate: %lu\n", __func__,

drivers/clk/bcm/clk-iproc-pll.c

344

pr_err("%s: pll: %s has invalid kp\n", __func__, clk_name);

drivers/clk/bcm/clk-iproc-pll.c

350

pr_err("%s: pll: %s fails to enable\n", __func__, clk_name);

drivers/clk/bcm/clk-iproc-pll.c

420

pr_err("%s: pll: %s failed to lock\n", __func__, clk_name);

drivers/clk/bcm/clk-kona-setup.c

103

pr_err("%s: bad gate offset for %s (%u > %u)\n",

drivers/clk/bcm/clk-kona-setup.c

110

pr_err("%s: bad hysteresis offset for %s "

drivers/clk/bcm/clk-kona-setup.c

117

pr_err("%s: hysteresis but no gate for %s\n", __func__, name);

drivers/clk/bcm/clk-kona-setup.c

124

pr_err("%s: bad divider offset for %s (%u > %u)\n",

drivers/clk/bcm/clk-kona-setup.c

133

pr_err("%s: bad pre-divider offset for %s "

drivers/clk/bcm/clk-kona-setup.c

143

pr_err("%s: bad selector offset for %s (%u > %u)\n",

drivers/clk/bcm/clk-kona-setup.c

152

pr_err("%s: bad trigger offset for %s (%u > %u)\n",

drivers/clk/bcm/clk-kona-setup.c

161

pr_err("%s: bad pre-trigger offset for %s (%u > %u)\n",

drivers/clk/bcm/clk-kona-setup.c

177

pr_err("%s: bad %s bit for %s (%u > %u)\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

197

pr_err("%s: bad %s field width 0 for %s\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

202

pr_err("%s: bad %s for %s (%u + %u > %u)\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

27

pr_err("%s: bad policy enable offset for %s "

drivers/clk/bcm/clk-kona-setup.c

304

pr_err("%s: bad selector for %s "

drivers/clk/bcm/clk-kona-setup.c

33

pr_err("%s: bad policy control offset for %s "

drivers/clk/bcm/clk-kona-setup.c

333

pr_err("%s: bad %s fixed value 0 for %s\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

435

pr_err("%s: multiple parents but no selector for %s\n",

drivers/clk/bcm/clk-kona-setup.c

451

pr_err("%s: pre-divider but no divider for %s\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

472

pr_err("%s: pre-trigger but no trigger for %s\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

476

pr_err("%s: required trigger missing for %s\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

492

pr_err("%s: unrecognized clock type (%d)\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

560

pr_err("%s: too many parents (%u > %u)\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

626

pr_err("%s: error processing parent clocks for %s (%d)\n",

drivers/clk/bcm/clk-kona-setup.c

711

pr_err("%s: clock type %d invalid for %s\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

718

pr_err("%s: clock data invalid for %s\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

727

pr_err("%s: error registering clock %s (%d)\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

782

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/bcm/clk-kona-setup.c

803

pr_err("%s: no valid CCU registers found for %pOFn\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

810

pr_err("%s: address range too large for %pOFn\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

818

pr_err("%s: ccu data not valid for %pOFn\n", __func__, node);

drivers/clk/bcm/clk-kona-setup.c

824

pr_err("%s: unable to map CCU registers for %pOFn\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

843

pr_err("%s: error adding ccu %pOFn as provider (%d)\n", __func__,

drivers/clk/bcm/clk-kona-setup.c

849

pr_err("Broadcom %pOFn initialization had errors\n", node);

drivers/clk/bcm/clk-kona-setup.c

854

pr_err("Broadcom %pOFn setup aborted\n", node);

drivers/clk/bcm/clk-kona-setup.c

93

pr_err("%s: bad policy offset for %s (%u > %u)\n",

drivers/clk/bcm/clk-kona.c

1081

pr_err("%s: gating failure for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

1085

pr_err("%s: %strigger failed for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

1146

pr_err("%s: gating failure for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

1150

pr_err("%s: trigger failed for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

1179

pr_err("%s: error initializing policy for %s\n",

drivers/clk/bcm/clk-kona.c

1184

pr_err("%s: error initializing gate for %s\n", __func__, name);

drivers/clk/bcm/clk-kona.c

1188

pr_err("%s: error initializing hyst for %s\n", __func__, name);

drivers/clk/bcm/clk-kona.c

1192

pr_err("%s: error initializing divider for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

1205

pr_err("%s: error initializing pre-divider for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

1211

pr_err("%s: error initializing selector for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

137

pr_err("%s: access already enabled for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

148

pr_err("%s: access wasn't enabled for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

207

pr_err("%s: ccu %s policy engine wouldn't go idle\n",

drivers/clk/bcm/clk-kona.c

237

pr_err("%s: ccu %s policy engine never started\n",

drivers/clk/bcm/clk-kona.c

259

pr_err("%s: ccu %s policy engine already stopped\n",

drivers/clk/bcm/clk-kona.c

270

pr_err("%s: ccu %s policy engine never stopped\n",

drivers/clk/bcm/clk-kona.c

300

pr_err("%s: unable to stop CCU %s policy engine\n",

drivers/clk/bcm/clk-kona.c

323

pr_err("%s: unable to restart CCU %s policy engine\n",

drivers/clk/bcm/clk-kona.c

487

pr_err("%s: failed to %s gate for %s\n", __func__,

drivers/clk/bcm/clk-kona.c

836

pr_err("%s: out-of-range parent selector %u (%s 0x%04x)\n",

drivers/clk/berlin/bg2.c

674

pr_err("%pOF: Unable to register leaf clock %d\n", np, n);

drivers/clk/berlin/bg2q.c

299

pr_err("%pOF: Unable to map global base\n", np);

drivers/clk/berlin/bg2q.c

307

pr_err("%pOF: Unable to map cpupll base\n", np);

drivers/clk/berlin/bg2q.c

372

pr_err("%pOF: Unable to register leaf clock %d\n", np, n);

drivers/clk/clk-asm9260.c

324

pr_err("%pOF: Unable to register leaf clock %d\n",

drivers/clk/clk-axm5516.c

520

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/clk-bm1880.c

538

pr_err("%s: failed to register clock %s\n",

drivers/clk/clk-bm1880.c

572

pr_err("%s: failed to register clock %s\n",

drivers/clk/clk-bm1880.c

701

pr_err("%s: failed to register clock %s\n",

drivers/clk/clk-bm1880.c

735

pr_err("%s: failed to register clock %s\n",

drivers/clk/clk-bm1880.c

855

pr_err("%s: failed to register clock %s\n",

drivers/clk/clk-bulk.c

185

pr_err("Failed to prepare clk '%s': %d\n",

drivers/clk/clk-bulk.c

235

pr_err("Failed to enable clk '%s': %d\n",

drivers/clk/clk-bulk.c

31

pr_err("%pOF: Failed to get clk index: %d ret: %d\n",

drivers/clk/clk-cdce706.c

629

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/clk-cdce925.c

592

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/clk-clps711x.c

139

pr_err("clk %i: register failed with %ld\n",

drivers/clk/clk-composite.c

148

pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n");

drivers/clk/clk-conf.c

149

pr_err("clk: couldn't set %s clk rate to %lu (%d), current rate: %lu\n",

drivers/clk/clk-conf.c

24

pr_err("clk: invalid value of clock-parents property at %pOF\n",

drivers/clk/clk-conf.c

71

pr_err("clk: failed to reparent %s to %s: %d\n",

drivers/clk/clk-en7523.c

579

pr_err("Failed to register clk %s: %ld\n",

drivers/clk/clk-en7523.c

624

pr_err("Failed reading fixed clk rate %s: %d\n",

drivers/clk/clk-en7523.c

632

pr_err("Failed reading fixed clk div %s: %d\n",

drivers/clk/clk-en7523.c

640

pr_err("Failed to register clk %s: %ld\n",

drivers/clk/clk-eyeq.c

779

pr_err("failed parsing state of %s\n", pll->name);

drivers/clk/clk-eyeq.c

787

pr_err("failed registering %s: %pe\n", pll->name, hw);

drivers/clk/clk-eyeq.c

802

pr_err("failed registering %s: %pe\n", ff->name, hw);

drivers/clk/clk-eyeq.c

810

pr_err("failed registering clk provider: %d\n", ret);

drivers/clk/clk-eyeq.c

824

pr_err("failed clk init: %d\n", ret);

drivers/clk/clk-fixed-factor.c

340

pr_err("%s Fixed factor clock <%pOFn> must have a clock-div property\n",

drivers/clk/clk-fixed-factor.c

346

pr_err("%s Fixed factor clock <%pOFn> must have a clock-mult property\n",

drivers/clk/clk-fixed-mmio.c

28

pr_err("%pOFn: failed to map address\n", node);

drivers/clk/clk-fixed-mmio.c

38

pr_err("%pOFn: failed to register fixed rate clock\n", node);

drivers/clk/clk-fixed-mmio.c

44

pr_err("%pOFn: failed to add clock provider\n", node);

drivers/clk/clk-gate.c

142

pr_err("gate bit exceeds LOWORD field\n");

drivers/clk/clk-gemini.c

415

pr_err("no syscon regmap\n");

drivers/clk/clk-gemini.c

426

pr_err("failed to read global status register\n");

drivers/clk/clk-hsdk-pll.c

366

pr_err("failed to map pll registers\n");

drivers/clk/clk-hsdk-pll.c

372

pr_err("failed to map pll registers\n");

drivers/clk/clk-hsdk-pll.c

382

pr_err("too much clock parents: %u\n", num_parents);

drivers/clk/clk-hsdk-pll.c

392

pr_err("failed to register %pOFn clock\n", node);

drivers/clk/clk-hsdk-pll.c

398

pr_err("failed to add hw provider for %pOFn clock\n", node);

drivers/clk/clk-k210.c

579

pr_err("%pOFP: register PLL0 failed\n", np);

drivers/clk/clk-k210.c

584

pr_err("%pOFP: register PLL1 failed\n", np);

drivers/clk/clk-k210.c

591

pr_err("%pOFP: register PLL2 failed\n", np);

drivers/clk/clk-k210.c

665

pr_err("%pOFP: register aclk failed\n", np);

drivers/clk/clk-k210.c

814

pr_err("%pOFP: register clock %s failed\n",

drivers/clk/clk-k210.c

905

pr_err("%pOFP: failed to map registers\n", np);

drivers/clk/clk-k210.c

987

pr_err("%pOFP: add clock provider failed %d\n", np, ret);

drivers/clk/clk-loongson1.c

259

pr_err("Unable to map base for %pOF\n", np);

drivers/clk/clk-loongson1.c

283

pr_err("Failed to register %pOF\n", np);

drivers/clk/clk-max77686.c

154

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/clk-milbeaut.c

438

pr_err("%s:%s couldn't stabilize\n",

drivers/clk/clk-moxart.c

30

pr_err("%pOF: of_iomap failed\n", node);

drivers/clk/clk-moxart.c

39

pr_err("%pOF: of_clk_get failed\n", node);

drivers/clk/clk-moxart.c

45

pr_err("%pOF: failed to register clock\n", node);

drivers/clk/clk-moxart.c

70

pr_err("%pOF: of_iomap failed\n", node);

drivers/clk/clk-moxart.c

83

pr_err("%pOF: of_clk_get failed\n", node);

drivers/clk/clk-moxart.c

89

pr_err("%pOF: failed to register clock\n", node);

drivers/clk/clk-mux.c

166

pr_err("mux value exceeds LOWORD field\n");

drivers/clk/clk-nomadik.c

101

pr_err("%s: must have src parent node with REGS (%pOFn)\n",

drivers/clk/clk-nomadik.c

269

pr_err("%s: the Nomadik has only PLL 1 & 2\n", __func__);

drivers/clk/clk-nomadik.c

514

pr_err("%s: PLL \"%s\" missing pll-id property\n",

drivers/clk/clk-nomadik.c

561

pr_err("%s: SRC clock \"%s\" missing clock-id property\n",

drivers/clk/clk-npcm7xx.c

415

pr_err("%pOFn: failed to get resource, ret %d\n", clk_np,

drivers/clk/clk-npcm7xx.c

441

pr_err("npcm7xx_clk: Can't register pll\n");

drivers/clk/clk-npcm7xx.c

453

pr_err("npcm7xx_clk: Can't register fixed div\n");

drivers/clk/clk-npcm7xx.c

460

pr_err("npcm7xx_clk: Can't register div2\n");

drivers/clk/clk-npcm7xx.c

47

pr_err("%s: parent rate is zero", __func__);

drivers/clk/clk-npcm7xx.c

476

pr_err("npcm7xx_clk: Can't register mux\n");

drivers/clk/clk-npcm7xx.c

495

pr_err("npcm7xx_clk: Can't register div table\n");

drivers/clk/clk-npcm7xx.c

506

pr_err("failed to add DT provider: %d\n", ret);

drivers/clk/clk-qoriq.c

1091

pr_err("%s: Couldn't register clk provider for node %pOFn: %d\n",

drivers/clk/clk-qoriq.c

1117

pr_err("%s: Couldn't register %s: %ld\n", __func__, name,

drivers/clk/clk-qoriq.c

1171

pr_err("%s: No input sysclk\n", __func__);

drivers/clk/clk-qoriq.c

1287

pr_err("%s: %s: register failed %ld\n",

drivers/clk/clk-qoriq.c

1295

pr_err("%s: %s: register to lookup table failed %d\n",

drivers/clk/clk-qoriq.c

1346

pr_err("%s: Couldn't register clk provider for node %pOFn: %d\n",

drivers/clk/clk-qoriq.c

1393

pr_err("%s: insufficient phandle args\n", __func__);

drivers/clk/clk-qoriq.c

1443

pr_err("%s: Bad phandle args %u %u\n", __func__, type, idx);

drivers/clk/clk-qoriq.c

1507

pr_err("%s(): %pOFn: of_iomap() failed\n", __func__, np);

drivers/clk/clk-qoriq.c

1520

pr_err("%s: unknown clockgen node %pOF\n", __func__, np);

drivers/clk/clk-qoriq.c

1533

pr_err("%s: Couldn't map %pOF regs\n", __func__,

drivers/clk/clk-qoriq.c

1554

pr_err("%s: Couldn't register clk provider for node %pOFn: %d\n",

drivers/clk/clk-qoriq.c

1580

pr_err("Couldn't register qoriq-cpufreq err=%ld\n",

drivers/clk/clk-qoriq.c

874

pr_err("%s: mux at %p has bad clksel\n", __func__, hwc->reg);

drivers/clk/clk-qoriq.c

962

pr_err("%s: Couldn't register %s: %ld\n", __func__, name,

drivers/clk/clk-rk808.c

81

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/clk-si5351.c

1408

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/clk-sp7021.c

180

pr_err("%s: %s freq:%lu not found a valid setting\n",

drivers/clk/clk-sp7021.c

288

pr_err("%s: %s freq:%lu not found a valid setting\n",

drivers/clk/clk-sparx5.c

240

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/clk-stm32f4.c

1840

pr_err("%pOFn: unable to map resource\n", np);

drivers/clk/clk-stm32f4.c

1969

pr_err("%pOF: Unable to register leaf clock %s\n",

drivers/clk/clk-stm32f4.c

1979

pr_err("Unable to register lsi clock\n");

drivers/clk/clk-stm32f4.c

1987

pr_err("Unable to register lse clock\n");

drivers/clk/clk-stm32f4.c

1996

pr_err("Unable to register hse-rtc clock\n");

drivers/clk/clk-stm32f4.c

2004

pr_err("Unable to register rtc clock\n");

drivers/clk/clk-stm32f4.c

862

pr_err("%s: failed to get clock parent\n", __func__);

drivers/clk/clk-stm32f4.c

906

pr_err("%pOF: missing st,ssc-moddepth-permyriad\n", np);

drivers/clk/clk-stm32f4.c

915

pr_err("%pOF: failed to get st,ssc-modmethod\n", np);

drivers/clk/clk-stm32h7.c

1217

pr_err("%pOFn: unable to map resource", np);

drivers/clk/clk-versaclock3.c

990

pr_err("invalid clk index %u for provider %pOF\n", idx, clkspec->np);

drivers/clk/clk-vt8500.c

183

pr_err("%s: invalid divisor for clock\n", __func__);

drivers/clk/clk-vt8500.c

249

pr_err("%s: enable-bit property required for gated clock\n",

drivers/clk/clk-vt8500.c

282

pr_err("%s: Invalid clock description in device tree\n",

drivers/clk/clk-vt8500.c

358

pr_err("%s: requested rate out of range\n", __func__);

drivers/clk/clk-vt8500.c

580

pr_err("%s: invalid pll type\n", __func__);

drivers/clk/clk-vt8500.c

62

pr_err("%s:of_iomap(pmc) failed\n", __func__);

drivers/clk/clk-xgene.c

154

pr_err("%s: could not register clk %s\n", __func__, name);

drivers/clk/clk-xgene.c

179

pr_err("Unable to map CSR register for %pOF\n", np);

drivers/clk/clk-xgene.c

375

pr_err("%s: could not register clk %s\n", __func__, name);

drivers/clk/clk-xgene.c

400

pr_err("no DTS register for %pOF\n", np);

drivers/clk/clk-xgene.c

405

pr_err("Unable to map resource for %pOF\n", np);

drivers/clk/clk-xgene.c

658

pr_err("%s: could not register clk %s\n", __func__, name);

drivers/clk/clk-xgene.c

666

pr_err("%s: could not register lookup clk %s\n",

drivers/clk/clk-xgene.c

693

pr_err("no DTS register for %pOF\n", np);

drivers/clk/clk-xgene.c

700

pr_err("Unable to map resource %d for %pOF\n", i, np);

drivers/clk/clk-xgene.c

735

pr_err("%s: could register provider clk %pOF\n", __func__, np);

drivers/clk/clk.c

172

pr_err("clk: Failed to runtime PM get '%s' for clk '%s'\n",

drivers/clk/clk.c

2670

pr_err("%s: clk %s dev %s con %s: invalid range [%lu, %lu]\n",

drivers/clk/clk.c

3921

pr_err("%s: %s must implement .round_rate or .determine_rate in addition to .recalc_rate\n",

drivers/clk/clk.c

3928

pr_err("%s: %s must implement .get_parent & .set_parent\n",

drivers/clk/clk.c

3935

pr_err("%s: %s must implement .set_parent & .determine_rate\n",

drivers/clk/clk.c

3942

pr_err("%s: %s must implement .get_parent as it has multi parents\n",

drivers/clk/clk.c

3950

pr_err("%s: %s must implement .set_parent & .set_rate\n",

drivers/clk/clk.c

4401

pr_err("%pOF: error %pe: failed to register clk '%s' (%pS)\n",

drivers/clk/clk.c

4570

pr_err("%s: unregistered clock: %s\n", __func__,

drivers/clk/clk.c

4970

pr_err("%s: invalid clock index %u\n", __func__, idx);

drivers/clk/clk.c

4985

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/clkdev.c

204

pr_err("%pV:%s: %s ID is greater than %zu\n",

drivers/clk/davinci/pll-da850.c

149

pr_err("%s: ioremap failed\n", __func__);

drivers/clk/hisilicon/clk-hi3620.c

454

pr_err("failed to find pctrl node in DTS\n");

drivers/clk/hisilicon/clk-hi3620.c

460

pr_err("failed to map pctrl\n");

drivers/clk/hisilicon/clk-hi3660-stub.c

117

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/hisilicon/clk-hi3660.c

591

pr_err("Failed to register crgctrl clock[%d] err=%ld\n",

drivers/clk/hisilicon/clk-hix5hd2.c

290

pr_err("%s: failed to register clock %s\n",

drivers/clk/hisilicon/clk.c

103

pr_err("%s: failed to register clock %s\n",

drivers/clk/hisilicon/clk.c

133

pr_err("%s: failed to register clock %s\n",

drivers/clk/hisilicon/clk.c

167

pr_err("%s: failed to register clock %s\n",

drivers/clk/hisilicon/clk.c

200

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/hisilicon/clk.c

229

pr_err("%s: failed to register clock %s\n",

drivers/clk/hisilicon/clk.c

266

pr_err("%s: failed to register clock %s\n",

drivers/clk/hisilicon/clk.c

303

pr_err("%s: failed to register clock %s\n",

drivers/clk/hisilicon/clk.c

333

pr_err("%s: failed to register clock %s\n",

drivers/clk/hisilicon/clk.c

67

pr_err("%s: failed to map clock registers\n", __func__);

drivers/clk/imgtec/clk-boston.c

42

pr_err("failed to find regmap\n");

drivers/clk/imgtec/clk-boston.c

48

pr_err("failed to read mmcm_div register: %d\n", err);

drivers/clk/imgtec/clk-boston.c

69

pr_err("failed to register input clock: %pe\n", hw);

drivers/clk/imgtec/clk-boston.c

76

pr_err("failed to register sys clock: %pe\n", hw);

drivers/clk/imgtec/clk-boston.c

83

pr_err("failed to register cpu clock: %pe\n", hw);

drivers/clk/imgtec/clk-boston.c

90

pr_err("failed to add DT provider: %d\n", err);

drivers/clk/imx/clk-composite-93.c

41

pr_err("Slice[%s] busy timeout\n", clk_hw_get_name(hw));

drivers/clk/imx/clk-divider-gate.c

111

pr_err("%s: no valid preset rate\n", clk_hw_get_name(hw));

drivers/clk/imx/clk-fracn-gppll.c

389

pr_err("%s: failed to register pll %s %d\n", __func__, name, ret);

drivers/clk/imx/clk-gpr-mux.c

51

pr_err("%s: failed to get parent (%pe)\n",

drivers/clk/imx/clk-gpr-mux.c

86

pr_err("failed to find %s regmap\n", compatible);

drivers/clk/imx/clk-imx35.c

125

pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel);

drivers/clk/imx/clk-imx35.c

98

pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel);

drivers/clk/imx/clk-imx6q.c

190

pr_err("ccm: parent clock %d not in ccm\n", index);

drivers/clk/imx/clk-imx6q.c

200

pr_err("ccm: child clock %d not in ccm\n", index);

drivers/clk/imx/clk-imx6q.c

211

pr_err("ccm: invalid ldb_di%d parent clock: %d\n",

drivers/clk/imx/clk-imx6q.c

352

pr_err("ccm: ldb_di%d_sel: couldn't disable pll2_pfd2_396m\n",

drivers/clk/imx/clk-imx6sx.c

514

pr_err("Failed to set pcie bus parent clk.\n");

drivers/clk/imx/clk-imx8qxp-lpcg.c

169

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/imx/clk-pll14xx.c

303

pr_err("Invalid rate %lu for pll clk %s\n", drate,

drivers/clk/imx/clk-pll14xx.c

527

pr_err("Unknown pll type for pll clk %s\n", name);

drivers/clk/imx/clk-pll14xx.c

546

pr_err("failed to register pll %s %d\n", name, ret);

drivers/clk/imx/clk-pllv2.c

223

pr_err("MX5: pll locking failed\n");

drivers/clk/imx/clk-scu.c

257

pr_err("%s: failed to get clock rate %d\n",

drivers/clk/imx/clk-scu.c

348

pr_err("%s: failed to get clock parent %d\n",

drivers/clk/imx/clk-scu.c

376

pr_err("%s: failed to set clock parent %d\n",

drivers/clk/imx/clk-scu.c

700

pr_err("%s: failed to allocate scu clk dev rsrc %d type %d\n",

drivers/clk/imx/clk-scu.c

831

pr_err("%s: clk unprepare failed %d\n", clk_hw_get_name(hw),

drivers/clk/imx/clk.c

48

pr_err("i.MX clk %u: register failed with %ld\n",

drivers/clk/imx/clk.c

58

pr_err("i.MX clk %u: register failed with %ld\n",

drivers/clk/ingenic/cgu.c

659

pr_err("%s: no external clock '%s' provided\n",

drivers/clk/ingenic/cgu.c

674

pr_err("%s: no clock type specified for '%s'\n", __func__,

drivers/clk/ingenic/cgu.c

735

pr_err("%s: custom clock may not be combined with type 0x%x\n",

drivers/clk/ingenic/cgu.c

745

pr_err("%s: PLL may not be combined with type 0x%x\n",

drivers/clk/ingenic/cgu.c

764

pr_err("%s: unknown clock type 0x%x\n", __func__, caps);

drivers/clk/ingenic/cgu.c

770

pr_err("%s: failed to register clock '%s'\n", __func__,

drivers/clk/ingenic/cgu.c

799

pr_err("%s: failed to map CGU registers\n", __func__);

drivers/clk/ingenic/jz4725b-cgu.c

263

pr_err("%s: failed to initialise CGU\n", __func__);

drivers/clk/ingenic/jz4725b-cgu.c

269

pr_err("%s: failed to register CGU Clocks\n", __func__);

drivers/clk/ingenic/jz4740-cgu.c

261

pr_err("%s: failed to initialise CGU\n", __func__);

drivers/clk/ingenic/jz4740-cgu.c

267

pr_err("%s: failed to register CGU Clocks\n", __func__);

drivers/clk/ingenic/jz4755-cgu.c

332

pr_err("%s: failed to initialise CGU\n", __func__);

drivers/clk/ingenic/jz4755-cgu.c

338

pr_err("%s: failed to register CGU Clocks\n", __func__);

drivers/clk/ingenic/jz4760-cgu.c

431

pr_err("%s: failed to initialise CGU\n", __func__);

drivers/clk/ingenic/jz4760-cgu.c

437

pr_err("%s: failed to register CGU Clocks\n", __func__);

drivers/clk/ingenic/jz4770-cgu.c

451

pr_err("%s: failed to initialise CGU\n", __func__);

drivers/clk/ingenic/jz4770-cgu.c

457

pr_err("%s: failed to register CGU Clocks\n", __func__);

drivers/clk/ingenic/jz4780-cgu.c

248

pr_err("%s: Wait for power up core1 timeout\n", __func__);

drivers/clk/ingenic/jz4780-cgu.c

796

pr_err("%s: failed to initialise CGU\n", __func__);

drivers/clk/ingenic/jz4780-cgu.c

802

pr_err("%s: failed to register CGU Clocks\n", __func__);

drivers/clk/ingenic/x1000-cgu.c

549

pr_err("%s: failed to initialise CGU\n", __func__);

drivers/clk/ingenic/x1000-cgu.c

555

pr_err("%s: failed to register CGU Clocks\n", __func__);

drivers/clk/ingenic/x1830-cgu.c

456

pr_err("%s: failed to initialise CGU\n", __func__);

drivers/clk/ingenic/x1830-cgu.c

462

pr_err("%s: failed to register CGU Clocks\n", __func__);

drivers/clk/keystone/gate.c

207

pr_err("%s: Out of memory\n", __func__);

drivers/clk/keystone/gate.c

214

pr_err("%s: control ioremap failed\n", __func__);

drivers/clk/keystone/gate.c

221

pr_err("%s: domain ioremap failed\n", __func__);

drivers/clk/keystone/gate.c

234

pr_err("%s: Parent clock not found\n", __func__);

drivers/clk/keystone/gate.c

244

pr_err("%s: error registering clk %pOFn\n", __func__, node);

drivers/clk/keystone/pll.c

167

pr_err("%s: Out of memory\n", __func__);

drivers/clk/keystone/pll.c

189

pr_err("%s: ioremap failed\n", __func__);

drivers/clk/keystone/pll.c

218

pr_err("%s: error initializing pll %pOFn\n", __func__, node);

drivers/clk/keystone/pll.c

259

pr_err("%s: ioremap failed\n", __func__);

drivers/clk/keystone/pll.c

265

pr_err("%s: missing parent clock\n", __func__);

drivers/clk/keystone/pll.c

271

pr_err("%s: missing 'shift' property\n", __func__);

drivers/clk/keystone/pll.c

277

pr_err("%s: missing 'bit-mask' property\n", __func__);

drivers/clk/keystone/pll.c

285

pr_err("%s: error registering divider %s\n", __func__, clk_name);

drivers/clk/keystone/pll.c

309

pr_err("%s: ioremap failed\n", __func__);

drivers/clk/keystone/pll.c

315

pr_err("%s: missing parent clocks\n", __func__);

drivers/clk/keystone/pll.c

320

pr_err("%s: missing 'shift' property\n", __func__);

drivers/clk/keystone/pll.c

325

pr_err("%s: missing 'bit-mask' property\n", __func__);

drivers/clk/keystone/pll.c

333

pr_err("%s: error registering mux %s\n", __func__, clk_name);

drivers/clk/keystone/sci-clk.c

685

pr_err("ti-sci-init-clocks failed.\n");

drivers/clk/mediatek/clk-cpumux.c

116

pr_err("Cannot find regmap for %pOF: %pe\n", node, regmap);

drivers/clk/mediatek/clk-cpumux.c

131

pr_err("Failed to register clk %s: %pe\n", mux->name,

drivers/clk/mediatek/clk-gate.c

269

pr_err("Cannot find regmap for %pOF: %pe\n", node, regmap);

drivers/clk/mediatek/clk-gate.c

291

pr_err("Failed to register clk %s: %pe\n", gate->name,

drivers/clk/mediatek/clk-mt2701.c

768

pr_err("%s(): could not register clock provider: %d\n",

drivers/clk/mediatek/clk-mt6765.c

750

pr_err("%s(): could not register clock provider: %d\n",

drivers/clk/mediatek/clk-mt6765.c

790

pr_err("%s(): could not register clock provider: %d\n",

drivers/clk/mediatek/clk-mt6765.c

822

pr_err("%s(): could not register clock provider: %d\n",

drivers/clk/mediatek/clk-mt6797.c

563

pr_err("%s(): could not register clock provider: %d\n",

drivers/clk/mediatek/clk-mt7981-apmixed.c

83

pr_err("%s(): could not register clock provider: %d\n",

drivers/clk/mediatek/clk-mt7986-apmixed.c

81

pr_err("%s(): could not register clock provider: %d\n",

drivers/clk/mediatek/clk-mtk.c

107

pr_err("Failed to register clk %s: %pe\n", rc->name,

drivers/clk/mediatek/clk-mtk.c

173

pr_err("Failed to register clk %s: %pe\n", ff->name,

drivers/clk/mediatek/clk-mtk.c

352

pr_err("Failed to register clk %s: %pe\n", mc->name,

drivers/clk/mediatek/clk-mtk.c

422

pr_err("Failed to register clk %s: %pe\n", mcd->name,

drivers/clk/mediatek/clk-mux.c

338

pr_err("Cannot find regmap for %pOF: %pe\n", node, regmap);

drivers/clk/mediatek/clk-mux.c

360

pr_err("Failed to register clk %s: %pe\n", mux->name,

drivers/clk/mediatek/clk-pll.c

424

pr_err("%s(): ioremap failed\n", __func__);

drivers/clk/mediatek/clk-pll.c

440

pr_err("Failed to register clk %s: %pe\n", pll->name,

drivers/clk/mediatek/clk-pllfh.c

211

pr_err("%s(): ioremap failed\n", __func__);

drivers/clk/mediatek/clk-pllfh.c

229

pr_err("Failed to register %s clk %s: %ld\n",

drivers/clk/mediatek/clk-pllfh.c

78

pr_err("%s(): ioremap failed\n", __func__);

drivers/clk/mediatek/clk-pllfh.c

84

pr_err("%s(): failed to get clocks property\n", __func__);

drivers/clk/meson/meson-clkc-utils.c

21

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/meson/meson8b.c

3645

pr_err("failed to get HHI regmap - Trying obsolete regs\n");

drivers/clk/meson/meson8b.c

3660

pr_err("%s: Failed to register clkc reset controller: %d\n",

drivers/clk/meson/meson8b.c

3690

pr_err("%s: failed to register the CPU clock notifier\n",

drivers/clk/meson/meson8b.c

3697

pr_err("%s: failed to register clock provider\n", __func__);

drivers/clk/microchip/clk-core.c

417

pr_err("%s:%s, no parent found for rate %lu.\n",

drivers/clk/microchip/clk-core.c

450

pr_err("%s: poll failed, clk active\n", clk_hw_get_name(hw));

drivers/clk/microchip/clk-core.c

491

pr_err("%s: poll timedout, clock is still active\n", __func__);

drivers/clk/microchip/clk-core.c

693

pr_err("%s: failed, clk in-use\n", __func__);

drivers/clk/microchip/clk-core.c

869

pr_err("%s: err, failed to set_parent() to %d, current %d\n",

drivers/clk/microchip/clk-pic32mzda.c

205

pr_err("spll_mux_clk: clk register failed\n");

drivers/clk/mmp/clk-frac.c

179

pr_err("%s: must pass a clk_factor_mask\n", __func__);

drivers/clk/mmp/clk-mix.c

180

pr_err("%s:%s cannot do frequency change\n",

drivers/clk/mmp/clk-of-mmp2.c

530

pr_err("failed to map mpmu registers\n");

drivers/clk/mmp/clk-of-mmp2.c

536

pr_err("failed to map apmu registers\n");

drivers/clk/mmp/clk-of-mmp2.c

542

pr_err("failed to map apbc registers\n");

drivers/clk/mmp/clk-of-pxa168.c

310

pr_err("failed to map mpmu registers\n");

drivers/clk/mmp/clk-of-pxa168.c

317

pr_err("failed to map apmu registers\n");

drivers/clk/mmp/clk-of-pxa168.c

324

pr_err("failed to map apbc registers\n");

drivers/clk/mmp/clk-of-pxa1928.c

217

pr_err("failed to map mpmu registers\n");

drivers/clk/mmp/clk-of-pxa1928.c

236

pr_err("failed to map apmu registers\n");

drivers/clk/mmp/clk-of-pxa1928.c

257

pr_err("failed to map apbc registers\n");

drivers/clk/mmp/clk-of-pxa910.c

279

pr_err("failed to map mpmu registers\n");

drivers/clk/mmp/clk-of-pxa910.c

285

pr_err("failed to map apmu registers\n");

drivers/clk/mmp/clk-of-pxa910.c

291

pr_err("failed to map apbc registers\n");

drivers/clk/mmp/clk-of-pxa910.c

297

pr_err("failed to map apbcp registers\n");

drivers/clk/mmp/clk-pll.c

163

pr_err("%s: failed to register clock %s\n",

drivers/clk/mmp/clk-pll.c

84

pr_err("bad refdiv: %d (0x%08x)\n", refdiv, val);

drivers/clk/mmp/clk.c

115

pr_err("%s: failed to register clock %s\n",

drivers/clk/mmp/clk.c

143

pr_err("%s: failed to register clock %s\n",

drivers/clk/mmp/clk.c

170

pr_err("%s: failed to register clock %s\n",

drivers/clk/mmp/clk.c

183

pr_err("CLK %d has invalid pointer %p\n", id, clk);

drivers/clk/mmp/clk.c

187

pr_err("CLK %d is invalid\n", id);

drivers/clk/mmp/clk.c

39

pr_err("%s: failed to register clock %s\n",

drivers/clk/mmp/clk.c

61

pr_err("%s: failed to register clock %s\n",

drivers/clk/mmp/clk.c

87

pr_err("%s: failed to register clock %s\n",

drivers/clk/mstar/clk-msc313-cpupll.c

106

pr_err("timeout waiting for LPF_LOCK\n");

drivers/clk/mvebu/ap-cpu-clk.c

242

pr_err("cannot get pll_cr_base regmap\n");

drivers/clk/mvebu/armada-370.c

72

pr_err("CPU freq select unsupported %d\n", cpu_freq_select);

drivers/clk/mvebu/armada-375.c

78

pr_err("Selected CPU frequency (%d) unsupported\n",

drivers/clk/mvebu/armada-38x.c

61

pr_err("Selected CPU frequency (%d) unsupported\n",

drivers/clk/mvebu/armada-39x.c

75

pr_err("Selected CPU frequency (%d) unsupported\n",

drivers/clk/mvebu/armada-xp.c

81

pr_err("CPU freq select unsupported: %d\n", cpu_freq_select);

drivers/clk/mvebu/clk-cpu.c

177

pr_err("%s: clock-complex base register not set\n",

drivers/clk/mvebu/common.c

246

pr_err("mvebu-clk-gating: cannot instantiate more than one gateable clock device\n");

drivers/clk/mvebu/common.c

53

pr_err("cannot get SSCG register node\n");

drivers/clk/mvebu/common.c

59

pr_err("cannot map SSCG register\n");

drivers/clk/mvebu/mv98dx3236.c

82

pr_err("CPU freq select unsupported %d\n", cpu_freq_select);

drivers/clk/mxs/clk-imx23.c

157

pr_err("i.MX23 clk %d: register failed with %ld\n",

drivers/clk/mxs/clk-imx28.c

235

pr_err("i.MX28 clk %d: register failed with %ld\n",

drivers/clk/nxp/clk-lpc18xx-ccu.c

129

pr_err("%s: invalid clock offset %d\n", __func__, offset);

drivers/clk/nxp/clk-lpc18xx-creg.c

171

pr_err("%s: syscon lookup failed\n", __func__);

drivers/clk/nxp/clk-lpc32xx.c

1502

pr_err("failed to find external 32KHz clock: %ld\n",

drivers/clk/nxp/clk-lpc32xx.c

1507

pr_err("invalid clock rate of external 32KHz oscillator\n");

drivers/clk/nxp/clk-lpc32xx.c

1513

pr_err("failed to find external main oscillator clock: %ld\n",

drivers/clk/nxp/clk-lpc32xx.c

1520

pr_err("failed to map system control block registers\n");

drivers/clk/nxp/clk-lpc32xx.c

1526

pr_err("failed to regmap system control block: %ld\n",

drivers/clk/nxp/clk-lpc32xx.c

1546

pr_err("failed to register %s clock: %ld\n",

drivers/clk/nxp/clk-lpc32xx.c

1576

pr_err("failed to map address range\n");

drivers/clk/nxp/clk-lpc32xx.c

1583

pr_err("failed to register %s clock: %ld\n",

drivers/clk/nxp/clk-lpc32xx.c

524

pr_err("%s: PLL clocks are not in valid ranges: %lu/%lu/%lu\n",

drivers/clk/nxp/clk-lpc32xx.c

617

pr_err("%s: %lu: no valid PLL parameters are found\n",

drivers/clk/pistachio/clk-pll.c

483

pr_err("Unrecognized PLL type %u\n", type);

drivers/clk/pistachio/clk.c

135

pr_err("Failed to enable clock %s: %d\n",

drivers/clk/pistachio/clk.c

31

pr_err("Failed to map clock provider registers\n");

drivers/clk/qcom/clk-alpha-pll.c

1043

pr_err("%s: clock needs to be gated\n",

drivers/clk/qcom/clk-alpha-pll.c

1474

pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",

drivers/clk/qcom/clk-alpha-pll.c

1525

pr_err("%s: alpha pll not in a valid vco range\n", name);

drivers/clk/qcom/clk-alpha-pll.c

1549

pr_err("%s: alpha pll calibration failed\n", name);

drivers/clk/qcom/clk-alpha-pll.c

1823

pr_err("Lucid PLL latch failed. Output may be unstable!\n");

drivers/clk/qcom/clk-alpha-pll.c

2111

pr_err("Missing the post_div_table for the %s PLL\n",

drivers/clk/qcom/clk-alpha-pll.c

2946

pr_err("Wait for PLL enable lock failed [%s] %d\n",

drivers/clk/qcom/clk-alpha-pll.c

3085

pr_err("alpha_pll: Call clk_set_rate with rounded rates!\n");

drivers/clk/qcom/clk-alpha-pll.c

3091

pr_err("alpha pll: not in a valid vco range\n");

drivers/clk/qcom/clk-alpha-pll.c

3097

pr_err("alpha pll: not in a valid vco range\n");

drivers/clk/qcom/clk-alpha-pll.c

3136

pr_err("alpha pll: no valid parent found\n");

drivers/clk/qcom/clk-alpha-pll.c

3142

pr_err("alpha pll: not in a valid vco range\n");

drivers/clk/qcom/clk-alpha-pll.c

3156

pr_err("alpha_pll: call clk_set_rate with rounded rates!\n");

drivers/clk/qcom/clk-alpha-pll.c

3165

pr_err("alpha pll calibration failed\n");

drivers/clk/qcom/clk-alpha-pll.c

841

pr_err("%s: alpha pll not in a valid vco range\n",

drivers/clk/qcom/clk-rcg2.c

1339

pr_err("%s: RCG did not turn on\n", name);

drivers/clk/qcom/clk-rcg2.c

1673

pr_err("Failed to update DFS tables for %s\n",

drivers/clk/qcom/clk-regmap-mux-div.c

175

pr_err("%s: Can't find parent with src %d\n", name, src);

drivers/clk/qcom/clk-regmap-mux-div.c

219

pr_err("%s: Can't find parent %d\n", name, src);

drivers/clk/qcom/clk-regmap-mux-div.c

54

pr_err("%s: RCG did not update its configuration", name);

drivers/clk/qcom/clk-regmap-mux-div.c

68

pr_err("%s: RCG configuration is pending\n", name);

drivers/clk/qcom/clk-rpm.c

518

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/qcom/clk-rpmh.c

950

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/qcom/clk-smd-rpm.c

1326

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/qcom/clk-smd-rpm.c

410

pr_err("RPM clock scaling (sleep set) not enabled!\n");

drivers/clk/qcom/clk-smd-rpm.c

418

pr_err("RPM clock scaling (active set) not enabled!\n");

drivers/clk/qcom/clk-spmi-pmic-div.c

189

pr_err("%s: index value %u is invalid; allowed range [1, %d]\n",

drivers/clk/qcom/common.c

251

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/clk/qcom/common.c

302

pr_err("%s: missing pll config or regs\n", init->name);

drivers/clk/qcom/krait-cc.c

332

pr_err("%s: invalid clock index %d\n", __func__, idx);

drivers/clk/ralink/clk-mt7621.c

330

pr_err("Couldn't register top clock %i\n", i);

drivers/clk/ralink/clk-mt7621.c

363

pr_err("Could not get sysc syscon regmap\n");

drivers/clk/ralink/clk-mt7621.c

369

pr_err("Could not get memc syscon regmap\n");

drivers/clk/ralink/clk-mt7621.c

381

pr_err("Couldn't register top clocks\n");

drivers/clk/ralink/clk-mt7621.c

389

pr_err("Couldn't add clk hw provider\n");

drivers/clk/ralink/clk-mtmips.c

244

pr_err("Couldn't register peripheral clock %d\n", idx);

drivers/clk/ralink/clk-mtmips.c

303

pr_err("Couldn't register fixed clock %d\n", idx);

drivers/clk/ralink/clk-mtmips.c

363

pr_err("Couldn't register factor clock %d\n", idx);

drivers/clk/ralink/clk-mtmips.c

754

pr_err("Couldn't register top clock %i\n", i);

drivers/clk/ralink/clk-mtmips.c

925

pr_err("Could not get sysc syscon regmap\n");

drivers/clk/ralink/clk-mtmips.c

945

pr_err("Couldn't register top clocks\n");

drivers/clk/ralink/clk-mtmips.c

951

pr_err("Couldn't register fixed clocks\n");

drivers/clk/ralink/clk-mtmips.c

957

pr_err("Couldn't register factor clocks\n");

drivers/clk/ralink/clk-mtmips.c

963

pr_err("Couldn't register peripheral clocks\n");

drivers/clk/ralink/clk-mtmips.c

971

pr_err("Couldn't add clk hw provider\n");

drivers/clk/renesas/clk-div6.c

181

pr_err("%s: %s DIV6 clock set to invalid parent %u\n",

drivers/clk/renesas/clk-div6.c

280

pr_err("%s: invalid number of parents for DIV6 clock %s\n",

drivers/clk/renesas/clk-div6.c

330

pr_err("%s: no parent found for %pOFn DIV6 clock\n",

drivers/clk/renesas/clk-div6.c

342

pr_err("%s: failed to map %pOFn DIV6 clock register\n",

drivers/clk/renesas/clk-div6.c

355

pr_err("%s: failed to register %pOFn DIV6 clock (%ld)\n",

drivers/clk/renesas/clk-mstp.c

109

pr_err("%s: failed to enable %p[%d]\n", __func__,

drivers/clk/renesas/clk-mstp.c

199

pr_err("%s: failed to remap SMSTPCR\n", __func__);

drivers/clk/renesas/clk-mstp.c

233

pr_err("%s: invalid clock %pOFn %s index %u\n",

drivers/clk/renesas/clk-mstp.c

244

pr_err("%s: failed to register %pOFn %s clock (%ld)\n",

drivers/clk/renesas/clk-r8a73a4.c

195

pr_err("%s: failed to count clocks\n", __func__);

drivers/clk/renesas/clk-r8a73a4.c

226

pr_err("%s: failed to register %pOFn %s clock (%ld)\n",

drivers/clk/renesas/clk-r8a7740.c

154

pr_err("%s: failed to count clocks\n", __func__);

drivers/clk/renesas/clk-r8a7740.c

185

pr_err("%s: failed to register %pOFn %s clock (%ld)\n",

drivers/clk/renesas/clk-r8a7778.c

116

pr_err("%s: failed to register %pOFn %s clock (%ld)\n",

drivers/clk/renesas/clk-r8a7778.c

91

pr_err("%s: failed to count clocks\n", __func__);

drivers/clk/renesas/clk-r8a7779.c

127

pr_err("%s: failed to count clocks\n", __func__);

drivers/clk/renesas/clk-r8a7779.c

155

pr_err("%s: failed to register %pOFn %s clock (%ld)\n",

drivers/clk/renesas/clk-rz.c

111

pr_err("%s: failed to register %pOFn %s clock (%ld)\n",

drivers/clk/renesas/clk-sh73a0.c

169

pr_err("%s: failed to count clocks\n", __func__);

drivers/clk/renesas/clk-sh73a0.c

205

pr_err("%s: failed to register %pOFn %s clock (%ld)\n",

drivers/clk/rockchip/clk-cpu.c

164

pr_err("%s: Invalid rate : %lu for cpuclk\n",

drivers/clk/rockchip/clk-cpu.c

233

pr_err("%s: Invalid rate : %lu for cpuclk\n",

drivers/clk/rockchip/clk-cpu.c

312

pr_err("%s: needs at least two parent clocks\n", __func__);

drivers/clk/rockchip/clk-cpu.c

341

pr_err("%s: could not lookup alternate parent: (%d)\n",

drivers/clk/rockchip/clk-cpu.c

349

pr_err("%s: could not enable alternate parent\n",

drivers/clk/rockchip/clk-cpu.c

356

pr_err("%s: could not lookup parent clock: (%d) %s\n",

drivers/clk/rockchip/clk-cpu.c

365

pr_err("%s: failed to register clock notifier for %s\n",

drivers/clk/rockchip/clk-cpu.c

382

pr_err("%s: could not register cpuclk %s\n", __func__, name);

drivers/clk/rockchip/clk-cpu.c

409

pr_err("%s: Invalid rate : %lu for cpuclk\n",

drivers/clk/rockchip/clk-cpu.c

432

pr_err("%s: Invalid rate : %lu for cpuclk\n",

drivers/clk/rockchip/clk-cpu.c

535

pr_err("%s: failed to register clock notifier for %s\n",

drivers/clk/rockchip/clk-ddr.c

119

pr_err("%s: unsupported ddrclk type %d\n", __func__, ddr_flag);

drivers/clk/rockchip/clk-gate-grf.c

80

pr_err("%s: regmap not available\n", __func__);

drivers/clk/rockchip/clk-inverter.c

43

pr_err("%s: unsupported phase %d for %s\n",

drivers/clk/rockchip/clk-mmc-phase.c

104

pr_err("%s: invalid clk rate\n", __func__);

drivers/clk/rockchip/clk-muxgrf.c

66

pr_err("%s: regmap not available\n", __func__);

drivers/clk/rockchip/clk-pll.c

100

pr_err("%s: timeout waiting for pll to lock\n", __func__);

drivers/clk/rockchip/clk-pll.c

1000

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/rockchip/clk-pll.c

1072

pr_err("%s: needs two parent clocks\n", __func__);

drivers/clk/rockchip/clk-pll.c

1192

pr_err("%s: failed to register pll clock %s : %ld\n",

drivers/clk/rockchip/clk-pll.c

139

pr_err("%s: timeout waiting for pll to lock\n", __func__);

drivers/clk/rockchip/clk-pll.c

267

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/rockchip/clk-pll.c

502

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/rockchip/clk-pll.c

621

pr_err("%s: timeout waiting for pll to lock\n", __func__);

drivers/clk/rockchip/clk-pll.c

751

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/rockchip/clk-pll.c

882

pr_err("%s: timeout waiting for pll to lock\n", __func__);

drivers/clk/rockchip/clk-px30.c

1010

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-px30.c

1018

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-px30.c

1054

pr_err("%s: could not map cru pmu region\n", __func__);

drivers/clk/rockchip/clk-px30.c

1062

pr_err("%s: rockchip pmu clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3036.c

449

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3036.c

464

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3128.c

584

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3128.c

590

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3188.c

769

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3188.c

777

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3228.c

691

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3228.c

699

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3288.c

943

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3288.c

951

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3308.c

925

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3308.c

933

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3328.c

889

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3328.c

897

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3368.c

874

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3368.c

882

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3399.c

1539

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3399.c

1547

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3399.c

1588

pr_err("%s: could not map cru pmu region\n", __func__);

drivers/clk/rockchip/clk-rk3399.c

1596

pr_err("%s: rockchip pmu clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3506.c

796

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3506.c

802

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3562.c

1035

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3562.c

1041

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3568.c

1624

pr_err("%s: could not map cru pmu region\n", __func__);

drivers/clk/rockchip/clk-rk3568.c

1630

pr_err("%s: rockchip pmu clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3568.c

1660

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3568.c

1668

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3576.c

1750

pr_err("%s: could not get PMU0 GRF syscon\n", __func__);

drivers/clk/rockchip/clk-rk3576.c

1756

pr_err("%s: could not get IOC GRF syscon\n", __func__);

drivers/clk/rockchip/clk-rk3576.c

1762

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3576.c

1768

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rk3588.c

2453

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rk3588.c

2459

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rv1108.c

792

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rv1108.c

798

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rv1126.c

1088

pr_err("%s: could not map cru pmu region\n", __func__);

drivers/clk/rockchip/clk-rv1126.c

1094

pr_err("%s: rockchip pmu clk init failed\n", __func__);

drivers/clk/rockchip/clk-rv1126.c

1118

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rv1126.c

1124

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk-rv1126b.c

1040

pr_err("%s: could not map cru region\n", __func__);

drivers/clk/rockchip/clk-rv1126b.c

1046

pr_err("%s: rockchip clk init failed\n", __func__);

drivers/clk/rockchip/clk.c

219

pr_err("%s: fractional child clock for %s can only be a mux\n",

drivers/clk/rockchip/clk.c

298

pr_err("%s: failed to register clock notifier for %s\n",

drivers/clk/rockchip/clk.c

428

pr_err("%s: could not register clk provider\n", __func__);

drivers/clk/rockchip/clk.c

447

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/rockchip/clk.c

661

pr_err("%s: unknown clock type %d\n",

drivers/clk/rockchip/clk.c

667

pr_err("%s: failed to register clock %s: %ld\n",

drivers/clk/rockchip/clk.c

716

pr_err("%s: failed to register clock %s: %ld\n",

drivers/clk/rockchip/clk.c

740

pr_err("%s: failed to register clock %s: %ld\n",

drivers/clk/rockchip/clk.c

793

pr_err("%s: cannot register restart handler, %d\n",

drivers/clk/rockchip/softrst.c

121

pr_err("%s: could not register reset controller, %d\n",

drivers/clk/samsung/clk-cpu.c

136

pr_err("%s: timeout in divider stabilization\n", __func__);

drivers/clk/samsung/clk-cpu.c

156

pr_err("%s: re-parenting mux timed-out\n", __func__);

drivers/clk/samsung/clk-cpu.c

659

pr_err("%s: invalid parent clock(s)\n", __func__);

drivers/clk/samsung/clk-cpu.c

685

pr_err("%s: failed to register clock notifier for %s\n",

drivers/clk/samsung/clk-cpu.c

703

pr_err("%s: could not register cpuclk %s\n", __func__,

drivers/clk/samsung/clk-exynos-arm64.c

257

pr_err("%s: could not enable bus clock %s; err = %d\n",

drivers/clk/samsung/clk-exynos4.c

1053

pr_err("%s: failed to lookup parent clock %s, assuming "

drivers/clk/samsung/clk-pll.c

1045

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

1140

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

1230

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

1375

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

1440

pr_err("%s: could not allocate pll clk %s\n",

drivers/clk/samsung/clk-pll.c

1593

pr_err("%s: failed to register pll clock %s : %d\n",

drivers/clk/samsung/clk-pll.c

243

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

356

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

471

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

560

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

670

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

807

pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,

drivers/clk/samsung/clk-pll.c

95

pr_err("Could not lock PLL %s\n", clk_hw_get_name(&pll->hw));

drivers/clk/samsung/clk.c

128

pr_err("%s: clock id missing for index %d\n", __func__,

drivers/clk/samsung/clk.c

135

pr_err("%s: failed to find clock %d\n", __func__,

drivers/clk/samsung/clk.c

143

pr_err("%s: failed to register lookup %s\n",

drivers/clk/samsung/clk.c

160

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/samsung/clk.c

180

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/samsung/clk.c

203

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/samsung/clk.c

233

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/samsung/clk.c

362

pr_err("%s: failed to register clock %s: %ld\n", __func__,

drivers/clk/socfpga/clk-agilex.c

347

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-agilex.c

366

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-agilex.c

385

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-agilex.c

405

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-agilex.c

425

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-agilex.c

445

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-agilex5.c

418

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/socfpga/clk-agilex5.c

438

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/socfpga/clk-agilex5.c

459

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/socfpga/clk-agilex5.c

479

pr_err("%s: failed to register clock %s\n", __func__,

drivers/clk/socfpga/clk-gate-a10.c

105

pr_err("Could not register clock provider for node:%s\n",

drivers/clk/socfpga/clk-gate-a10.c

99

pr_err("Could not register clock:%s\n", clk_name);

drivers/clk/socfpga/clk-gate.c

204

pr_err("Could not register clock:%s\n", clk_name);

drivers/clk/socfpga/clk-gate.c

210

pr_err("Could not register clock provider for node:%s\n",

drivers/clk/socfpga/clk-periph-a10.c

111

pr_err("Could not register clock:%s\n", clk_name);

drivers/clk/socfpga/clk-periph-a10.c

117

pr_err("Could not register clock provider for node:%s\n",

drivers/clk/socfpga/clk-periph.c

101

pr_err("Could not register clock:%s\n", clk_name);

drivers/clk/socfpga/clk-periph.c

107

pr_err("Could not register clock provider for node:%s\n",

drivers/clk/socfpga/clk-pll-a10.c

109

pr_err("Could not register clock:%s\n", clk_name);

drivers/clk/socfpga/clk-pll-a10.c

115

pr_err("Could not register clock provider for node:%s\n",

drivers/clk/socfpga/clk-pll.c

113

pr_err("Could not register clock:%s\n", clk_name);

drivers/clk/socfpga/clk-pll.c

119

pr_err("Could not register clock provider for node:%s\n",

drivers/clk/socfpga/clk-s10.c

316

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-s10.c

335

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-s10.c

355

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-s10.c

375

pr_err("%s: failed to register clock %s\n",

drivers/clk/socfpga/clk-s10.c

395

pr_err("%s: failed to map clock registers\n", __func__);

drivers/clk/sophgo/clk-sg2042-clkgen.c

1008

pr_err("failed to register clock %s\n", mux->hw.init->name);

drivers/clk/sophgo/clk-sg2042-clkgen.c

1041

pr_err("failed to register clock notifier for %s\n",

drivers/clk/sophgo/clk-sg2042-clkgen.c

1126

pr_err("%s failed error number %d\n", __func__, ret);

drivers/clk/sophgo/clk-sg2042-clkgen.c

833

pr_err("failed to register clock %s\n", div->hw.init->name);

drivers/clk/sophgo/clk-sg2042-clkgen.c

867

pr_err("failed to register clock %s\n", gate->hw.init->name);

drivers/clk/sophgo/clk-sg2042-clkgen.c

909

pr_err("failed to register clock %s\n", gate->hw.init->name);

drivers/clk/sophgo/clk-sg2042-pll.c

263

pr_err("INVALID FREF: %ld\n", parent_rate);

drivers/clk/sophgo/clk-sg2042-pll.c

482

pr_err("failed to register clock %s\n", pll->hw.init->name);

drivers/clk/sophgo/clk-sg2042-pll.c

537

pr_err("%s failed error number %d\n", __func__, ret);

drivers/clk/sophgo/clk-sg2042-rpgate.c

213

pr_err("failed to register clock %s\n", gate->hw.init->name);

drivers/clk/sophgo/clk-sg2042-rpgate.c

269

pr_err("%s failed error number %d\n", __func__, ret);

drivers/clk/spear/clk-aux-synth.c

146

pr_err("Invalid arguments passed");

drivers/clk/spear/clk-aux-synth.c

193

pr_err("clk register failed\n");

drivers/clk/spear/clk-frac-synth.c

133

pr_err("Invalid arguments passed\n");

drivers/clk/spear/clk-frac-synth.c

158

pr_err("clk register failed\n");

drivers/clk/spear/clk-gpt-synth.c

122

pr_err("Invalid arguments passed\n");

drivers/clk/spear/clk-gpt-synth.c

147

pr_err("clk register failed\n");

drivers/clk/spear/clk-vco-pll.c

292

pr_err("Invalid arguments passed");

drivers/clk/spear/clk-vco-pll.c

358

pr_err("Failed to register vco pll clock\n");

drivers/clk/spear/clk-vco-pll.c

90

pr_err("%s: prate is must for pll clk\n", __func__);

drivers/clk/sprd/common.c

51

pr_err("%s: failed to get syscon regmap\n", __func__);

drivers/clk/sprd/common.c

72

pr_err("failed to init regmap\n");

drivers/clk/st/clk-flexgen.c

607

pr_err("%s: Failed to get number of output clocks (%d)",

drivers/clk/st/clkgen-fsyn.c

1002

pr_err("%s: Failed to get base address\n", __func__);

drivers/clk/st/clkgen-fsyn.c

341

pr_err("%s:%s error calculating rate\n",

drivers/clk/st/clkgen-fsyn.c

807

pr_err("%s:%s error calculating rate\n",

drivers/clk/st/clkgen-mux.c

71

pr_err("%s: Failed to get base address\n", __func__);

drivers/clk/st/clkgen-mux.c

78

pr_err("%s: Failed to get parents (%ld)\n",

drivers/clk/stm32/clk-stm32-core.c

87

pr_err("stm32 reset failed to initialize\n");

drivers/clk/stm32/clk-stm32-core.c

94

pr_err("stm32 clock failed to initialize\n");

drivers/clk/stm32/clk-stm32mp1.c

2198

pr_err("Unable to register %s\n", cfg->name);

drivers/clk/stm32/clk-stm32mp1.c

2265

pr_err("stm32mp1 reset failed to initialize\n");

drivers/clk/stm32/clk-stm32mp1.c

2272

pr_err("stm32mp1 clock failed to initialize\n");

drivers/clk/stm32/clk-stm32mp1.c

2286

pr_err("%pOFn: unable to map resource", dev_of_node(dev));

drivers/clk/sunxi-ng/ccu-sun5i.c

995

pr_err("%pOF: Could not map the clock registers\n", node);

drivers/clk/sunxi-ng/ccu_common.c

146

pr_err("Couldn't register clock %d - %s\n", i, name);

drivers/clk/sunxi-ng/ccu_common.c

251

pr_err("%pOF: probing clocks failed: %d\n", node, ret);

drivers/clk/sunxi/clk-a10-pll2.c

102

pr_err("Couldn't register the base multiplier clock\n");

drivers/clk/sunxi/clk-a10-pll2.c

69

pr_err("Couldn't register the prediv clock\n");

drivers/clk/sunxi/clk-mod0.c

133

pr_err("Could not get registers for mod0-clk: %pOFn\n",

drivers/clk/sunxi/clk-mod0.c

151

pr_err("Could not get registers for a13-mbus-clk\n");

drivers/clk/sunxi/clk-mod0.c

299

pr_err("Couldn't map the %pOFn clock registers\n", node);

drivers/clk/sunxi/clk-sun4i-display.c

119

pr_err("%s: Could not map the clock registers\n", clk_name);

drivers/clk/sunxi/clk-sun4i-display.c

125

pr_err("%s: Could not retrieve the parents\n", clk_name);

drivers/clk/sunxi/clk-sun4i-display.c

165

pr_err("%s: Couldn't register the clock\n", clk_name);

drivers/clk/sunxi/clk-sun4i-display.c

171

pr_err("%s: Couldn't register DT provider\n", clk_name);

drivers/clk/sunxi/clk-sun4i-display.c

197

pr_err("%s: Couldn't register the reset controller\n",

drivers/clk/sunxi/clk-sun4i-pll3.c

36

pr_err("%s: Could not map the clock registers\n", clk_name);

drivers/clk/sunxi/clk-sun4i-pll3.c

64

pr_err("%s: Couldn't register the clock\n", clk_name);

drivers/clk/sunxi/clk-sun4i-pll3.c

70

pr_err("%s: Couldn't register DT provider\n",

drivers/clk/sunxi/clk-sun4i-tcon-ch1.c

239

pr_err("%s: Could not map the clock registers\n", clk_name);

drivers/clk/sunxi/clk-sun4i-tcon-ch1.c

245

pr_err("%s Could not retrieve the parents\n", clk_name);

drivers/clk/sunxi/clk-sun4i-tcon-ch1.c

265

pr_err("%s: Couldn't register the clock\n", clk_name);

drivers/clk/sunxi/clk-sun4i-tcon-ch1.c

271

pr_err("%s: Couldn't register our clock provider\n", clk_name);

drivers/clk/sunxi/clk-sun8i-apb0.c

68

pr_err("Could not get registers for a23-apb0-clk\n");

drivers/clk/sunxi/clk-sun8i-mbus.c

43

pr_err("Could not get registers for sun8i-mbus-clk\n");

drivers/clk/sunxi/clk-sun9i-core.c

136

pr_err("Could not get registers for a80-gt-clk: %pOFn\n",

drivers/clk/sunxi/clk-sun9i-core.c

191

pr_err("Could not get registers for a80-ahb-clk: %pOFn\n",

drivers/clk/sunxi/clk-sun9i-core.c

217

pr_err("Could not get registers for a80-apb0-clk: %pOFn\n",

drivers/clk/sunxi/clk-sun9i-core.c

274

pr_err("Could not get registers for a80-apb1-clk: %pOFn\n",

drivers/clk/sunxi/clk-sun9i-core.c

82

pr_err("Could not get registers for a80-pll4-clk: %pOFn\n",

drivers/clk/sunxi/clk-sunxi.c

1082

pr_err("%s: failed to add clock provider for %s\n",

drivers/clk/sunxi/clk-sunxi.c

563

pr_err("Could not get registers for factors-clk: %pOFn\n",

drivers/clk/sunxi/clk-sunxi.c

662

pr_err("Could not map registers for mux-clk: %pOF\n", node);

drivers/clk/sunxi/clk-sunxi.c

668

pr_err("%s: could not read clock-output-names from \"%pOF\"\n",

drivers/clk/sunxi/clk-sunxi.c

679

pr_err("%s: failed to register mux clock %s: %ld\n", __func__,

drivers/clk/sunxi/clk-sunxi.c

685

pr_err("%s: failed to add clock provider for %s\n",

drivers/clk/sunxi/clk-sunxi.c

785

pr_err("Could not map registers for mux-clk: %pOF\n", node);

drivers/clk/sunxi/clk-sunxi.c

792

pr_err("%s: could not read clock-output-names from \"%pOF\"\n",

drivers/clk/sunxi/clk-sunxi.c

802

pr_err("%s: failed to register divider clock %s: %ld\n",

drivers/clk/sunxi/clk-sunxi.c

808

pr_err("%s: failed to add clock provider for %s\n",

drivers/clk/sunxi/clk-sunxi.c

990

pr_err("Could not map registers for divs-clk: %pOF\n", node);

drivers/clk/sunxi/clk-usb.c

154

pr_err("Could not get clock for reset controls\n");

drivers/clk/tegra/clk-audio-sync.c

55

pr_err("%s: could not allocate sync source clk\n", __func__);

drivers/clk/tegra/clk-divider.c

153

pr_err("%s: could not allocate fractional divider clk\n",

drivers/clk/tegra/clk-periph-gate.c

151

pr_err("%s: could not allocate periph gate clk\n", __func__);

drivers/clk/tegra/clk-pll.c

1133

pr_err("%s: failed to get OSC clock\n", __func__);

drivers/clk/tegra/clk-pll.c

1157

pr_err("%s: unexpected input rate %lu Hz\n", __func__,

drivers/clk/tegra/clk-pll.c

1295

pr_err("%s: Unexpected reference rate %lu\n",

drivers/clk/tegra/clk-pll.c

1479

pr_err("%s: Unexpected reference rate %lu\n",

drivers/clk/tegra/clk-pll.c

1761

pr_err("%s: failed to get OSC clock\n", __func__);

drivers/clk/tegra/clk-pll.c

1785

pr_err("%s: unexpected input rate %lu Hz\n", __func__,

drivers/clk/tegra/clk-pll.c

319

pr_err("%s: Timed out waiting for pll %s lock\n", __func__,

drivers/clk/tegra/clk-pll.c

584

pr_err("%s Unexpected reference rate %lu\n",

drivers/clk/tegra/clk-pll.c

811

pr_err("%s: Can not change %s fixed rate %lu to %lu\n",

drivers/clk/tegra/clk-pll.c

821

pr_err("%s: Failed to set %s rate %lu\n", __func__,

drivers/clk/tegra/clk-pll.c

888

pr_err("Clock %s has unknown fixed frequency\n",

drivers/clk/tegra/clk-pll.c

951

pr_err("%s: timeout waiting for PLLE\n", __func__);

drivers/clk/tegra/clk-tegra-audio.c

173

pr_err("No audio data passed to tegra_audio_clk_init\n");

drivers/clk/tegra/clk-tegra114.c

1333

pr_err("ioremap tegra114 CAR failed\n");

drivers/clk/tegra/clk-tegra114.c

1339

pr_err("Failed to find pmc node\n");

drivers/clk/tegra/clk-tegra114.c

1347

pr_err("Can't map pmc registers\n");

drivers/clk/tegra/clk-tegra124-emc.c

191

pr_err("%s: could not get external memory controller\n",

drivers/clk/tegra/clk-tegra124-emc.c

202

pr_err("%s: cannot find EMC driver\n", __func__);

drivers/clk/tegra/clk-tegra124-emc.c

237

pr_err("cannot change parent %s rate to %ld: %d\n",

drivers/clk/tegra/clk-tegra124-emc.c

246

pr_err("cannot enable parent clock: %d\n", err);

drivers/clk/tegra/clk-tegra124-emc.c

351

pr_err("cannot switch to rate %ld without emc table\n", rate);

drivers/clk/tegra/clk-tegra124-emc.c

367

pr_err("cannot find backup timing\n");

drivers/clk/tegra/clk-tegra124-emc.c

376

pr_err("cannot set backup timing: %d\n", err);

drivers/clk/tegra/clk-tegra124-emc.c

395

pr_err("timing %pOF: failed to read rate\n", node);

drivers/clk/tegra/clk-tegra124-emc.c

403

pr_err("timing %pOF: failed to read parent rate\n", node);

drivers/clk/tegra/clk-tegra124-emc.c

411

pr_err("timing %pOF: failed to get parent clock\n", node);

drivers/clk/tegra/clk-tegra124-emc.c

419

pr_err("timing %pOF: %s is not a valid parent\n",

drivers/clk/tegra/clk-tegra124.c

1463

pr_err("ioremap tegra124/tegra132 CAR failed\n");

drivers/clk/tegra/clk-tegra124.c

1469

pr_err("Failed to find pmc node\n");

drivers/clk/tegra/clk-tegra124.c

1477

pr_err("Can't map pmc registers\n");

drivers/clk/tegra/clk-tegra20.c

1129

pr_err("Can't map CAR registers\n");

drivers/clk/tegra/clk-tegra20.c

1135

pr_err("Failed to find pmc node\n");

drivers/clk/tegra/clk-tegra20.c

1142

pr_err("Can't map pmc registers\n");

drivers/clk/tegra/clk-tegra20.c

596

pr_err("Unexpected clock autodetect value %d",

drivers/clk/tegra/clk-tegra20.c

618

pr_err("Invalid pll ref divider %d\n", pll_ref_div);

drivers/clk/tegra/clk-tegra210.c

1137

pr_err("%s: Unexpected reference rate %lu\n",

drivers/clk/tegra/clk-tegra210.c

2782

pr_err("trying to assert IDDQ while UTMIPLL is locked\n");

drivers/clk/tegra/clk-tegra210.c

2812

pr_err("%s: Unexpected oscillator freq %lu\n", __func__,

drivers/clk/tegra/clk-tegra210.c

2905

pr_err("Unknown PLL_U reference frequency %lu\n", pll_ref_freq);

drivers/clk/tegra/clk-tegra210.c

2934

pr_err("Timed out waiting for PLL_U to lock\n");

drivers/clk/tegra/clk-tegra210.c

3743

pr_err("ioremap tegra210 CAR failed\n");

drivers/clk/tegra/clk-tegra210.c

3749

pr_err("Failed to find pmc node\n");

drivers/clk/tegra/clk-tegra210.c

3757

pr_err("Can't map pmc registers\n");

drivers/clk/tegra/clk-tegra210.c

3764

pr_err("ioremap tegra210 APE failed\n");

drivers/clk/tegra/clk-tegra210.c

3770

pr_err("ioremap tegra210 DISPA failed\n");

drivers/clk/tegra/clk-tegra210.c

3776

pr_err("ioremap tegra210 VIC failed\n");

drivers/clk/tegra/clk-tegra30.c

1329

pr_err("ioremap tegra30 CAR failed\n");

drivers/clk/tegra/clk-tegra30.c

1335

pr_err("Failed to find pmc node\n");

drivers/clk/tegra/clk-tegra30.c

1342

pr_err("Can't map pmc registers\n");

drivers/clk/tegra/clk.c

275

pr_err("%s: invalid entry %ld in clks array for id %d\n",

drivers/clk/tegra/clk.c

285

pr_err("%s: Failed to set parent %s of %s\n",

drivers/clk/tegra/clk.c

294

pr_err("%s: Failed to set rate %lu of %s\n",

drivers/clk/tegra/clk.c

302

pr_err("%s: Failed to enable %s\n", __func__,

drivers/clk/tegra/clk.c

330

pr_err

drivers/clk/tegra/clk.c

421

pr_err("%s: failed to create device for %pOF\n",

drivers/clk/ti/apll.c

200

pr_err("dra7 apll %pOFn must have parent(s)\n", node);

drivers/clk/ti/apll.c

366

pr_err("%pOFn must have one parent\n", node);

drivers/clk/ti/apll.c

374

pr_err("%pOFn missing clock-frequency\n", node);

drivers/clk/ti/apll.c

384

pr_err("%pOFn missing idlest-shift\n", node);

drivers/clk/ti/clk-44xx.c

812

pr_err("%s: failed to configure USB DPLL!\n", __func__);

drivers/clk/ti/clk-44xx.c

827

pr_err("%s: failed to configure ABE DPLL!\n", __func__);

drivers/clk/ti/clk-54xx.c

639

pr_err("%s: failed to configure ABE DPLL!\n", __func__);

drivers/clk/ti/clk-54xx.c

645

pr_err("%s: failed to configure ABE m2x2 DPLL!\n", __func__);

drivers/clk/ti/clk-54xx.c

650

pr_err("%s: failed to configure USB DPLL!\n", __func__);

drivers/clk/ti/clk-54xx.c

655

pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);

drivers/clk/ti/clk-7xx.c

958

pr_err("%s: failed to configure GMAC DPLL!\n", __func__);

drivers/clk/ti/clk-7xx.c

963

pr_err("%s: failed to configure USB DPLL!\n", __func__);

drivers/clk/ti/clk-7xx.c

968

pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);

drivers/clk/ti/clk-7xx.c

973

pr_err("%s: failed to set dss_deshdcp_clk\n", __func__);

drivers/clk/ti/clk-814x.c

69

pr_err("Could not find node for plls\n");

drivers/clk/ti/clk-dra7-atl.c

175

pr_err("%s: could not allocate dra7_atl_desc\n", __func__);

drivers/clk/ti/clk-dra7-atl.c

188

pr_err("%s: atl clock %pOFn must have 1 parent\n", __func__,

drivers/clk/ti/clk-dra7-atl.c

238

pr_err("%s: failed to lookup atl clock %d\n", __func__,

drivers/clk/ti/clk-dra7-atl.c

247

pr_err("%s: failed to get atl clock %d from provider\n",

drivers/clk/ti/clk.c

105

pr_err("Attempt to register ll_ops multiple times.\n");

drivers/clk/ti/clk.c

308

pr_err("clk-provider not found for %pOFn!\n", node);

drivers/clk/ti/clk.c

317

pr_err("%pOFn parent clksel must have reg[%d]!\n", node, index);

drivers/clk/ti/clk.c

407

pr_err("%pOFn missing 'clocks' child node.\n", parent);

drivers/clk/ti/clkctrl.c

164

pr_err("%s: failed to enable\n", clk_hw_get_name(hw));

drivers/clk/ti/clkctrl.c

194

pr_err("%s: failed to disable\n", clk_hw_get_name(hw));

drivers/clk/ti/clkctrl.c

412

pr_err("%s: Data parsing for %pOF:%04x:%d failed\n", __func__,

drivers/clk/ti/clkctrl.c

453

pr_err("%s: bad subclk type: %d\n", __func__,

drivers/clk/ti/clkctrl.c

578

pr_err("%pOF not found from clkctrl data.\n", node);

drivers/clk/ti/clkt_dflt.c

69

pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",

drivers/clk/ti/clockdomain.c

135

pr_err("%s: Failed get %pOF' clock nr %d (%ld)\n",

drivers/clk/ti/clockdomain.c

42

pr_err("%s: %s: no clkdm set ?!\n", __func__,

drivers/clk/ti/clockdomain.c

48

pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",

drivers/clk/ti/clockdomain.c

76

pr_err("%s: %s: no clkdm set ?!\n", __func__,

drivers/clk/ti/clockdomain.c

82

pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",

drivers/clk/ti/composite.c

140

pr_err("duplicate component types for %pOFn (%s)!\n",

drivers/clk/ti/composite.c

164

pr_err("%s: no parents found for %pOFn!\n", __func__, node);

drivers/clk/ti/composite.c

210

pr_err("composite clk %pOFn must have component(s)\n", node);

drivers/clk/ti/composite.c

246

pr_err("component-clock %pOFn must have parent(s)\n", node);

drivers/clk/ti/divider.c

412

pr_err("no valid dividers for %pOFn table\n", node);

drivers/clk/ti/divider.c

450

pr_err("no max-div for %pOFn!\n", node);

drivers/clk/ti/dpll.c

221

pr_err("%pOFn must have parent\n", node);

drivers/clk/ti/dpll.c

298

pr_err("%pOFn must have parent(s)\n", node);

drivers/clk/ti/dpll3xxx.c

1022

pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");

drivers/clk/ti/dpll3xxx.c

1045

pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");

drivers/clk/ti/dpll3xxx.c

80

pr_err("clock: %s failed transition to '%s'\n",

drivers/clk/ti/fapll.c

126

pr_err("%s failed to lock\n", fd->name);

drivers/clk/ti/fapll.c

525

pr_err("failed to register clock\n");

drivers/clk/ti/fapll.c

567

pr_err("%pOFn must have two parents\n", node);

drivers/clk/ti/fapll.c

576

pr_err("%pOFn could not get clk_ref\n", node);

drivers/clk/ti/fapll.c

582

pr_err("%pOFn could not get clk_bypass\n", node);

drivers/clk/ti/fapll.c

588

pr_err("%pOFn could not get IO base\n", node);

drivers/clk/ti/fixed-factor.c

37

pr_err("%pOFn must have a clock-div property\n", node);

drivers/clk/ti/fixed-factor.c

42

pr_err("%pOFn must have a clock-mult property\n", node);

drivers/clk/ti/gate.c

146

pr_err("%pOFn must have 1 parent\n", node);

drivers/clk/ti/interface.c

77

pr_err("%pOFn must have a parent\n", node);

drivers/clk/ti/mux.c

180

pr_err("mux-clock %pOFn must have parents\n", node);

drivers/clk/ti/mux.c

271

pr_err("%pOFn must have parents\n", node);

drivers/clk/ux500/clk-prcc.c

105

pr_err("clk_prcc: %s invalid arguments passed\n", __func__);

drivers/clk/ux500/clk-prcc.c

137

pr_err("clk_prcc: %s failed to register clk\n", __func__);

drivers/clk/ux500/clk-prcmu.c

105

pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,

drivers/clk/ux500/clk-prcmu.c

125

pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n",

drivers/clk/ux500/clk-prcmu.c

147

pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,

drivers/clk/ux500/clk-prcmu.c

208

pr_err("clk_prcmu: %s invalid arguments passed\n", __func__);

drivers/clk/ux500/clk-prcmu.c

237

pr_err("clk_prcmu: %s failed to register clk\n", __func__);

drivers/clk/ux500/clk-prcmu.c

315

pr_err("clk_prcmu: %s failed to disable %s\n", __func__,

drivers/clk/ux500/clk-prcmu.c

366

pr_err("clk_prcmu_clkout: %s invalid arguments passed\n", __func__);

drivers/clk/ux500/clk-prcmu.c

375

pr_err("clk_prcmu_clkout: %s bad clock name\n", __func__);

drivers/clk/ux500/clk-prcmu.c

401

pr_err("clk_prcmu_clkout: %s failed to register clk\n", __func__);

drivers/clk/ux500/clk-prcmu.c

45

pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,

drivers/clk/ux500/clk-prcmu.c

82

pr_err("clk_prcmu: %s fail req APE OPP for %s.\n",

drivers/clk/ux500/reset-prcc.c

149

pr_err("%s: invalid PRCC %d\n", __func__, prcc_num);

drivers/clk/ux500/reset-prcc.c

168

pr_err("PRCC failed to remap for reset base %d (%08x)\n",

drivers/clk/ux500/reset-prcc.c

180

pr_err("PRCC failed to register reset controller\n");

drivers/clk/ux500/u8500_of_clk.c

104

pr_err("%s: invalid divider %d\n", __func__, divider);

drivers/clk/ux500/u8500_of_clk.c

116

pr_err("failed to register clkout%d\n", id + 1);

drivers/clk/ux500/u8500_of_clk.c

149

pr_err("failed to get CLKRST %d base address\n",

drivers/clk/ux500/u8500_of_clk.c

42

pr_err("%s: invalid PRCC base %d\n", __func__, base);

drivers/clk/ux500/u8500_of_clk.c

88

pr_err("%s: invalid clkout ID %d\n", __func__, id);

drivers/clk/ux500/u8500_of_clk.c

99

pr_err("%s: invalid source ID %d\n", __func__, source);

drivers/clk/versatile/clk-icst.c

164

pr_err("ICST error: tried to set bit 8 of VDW\n");

drivers/clk/versatile/clk-icst.c

166

pr_err("ICST error: tried to use VOD != 1\n");

drivers/clk/versatile/clk-icst.c

168

pr_err("ICST error: tried to use RDW != 22\n");

drivers/clk/versatile/clk-icst.c

174

pr_err("ICST error: tried to set bit 8 of VDW\n");

drivers/clk/versatile/clk-icst.c

176

pr_err("ICST error: tried to use VOD != 1\n");

drivers/clk/versatile/clk-icst.c

178

pr_err("ICST error: tried to use RDW != 22\n");

drivers/clk/versatile/clk-icst.c

184

pr_err("ICST error: tried to set bit 8 of VDW\n");

drivers/clk/versatile/clk-icst.c

186

pr_err("ICST error: tried to use RDW != 22\n");

drivers/clk/versatile/clk-icst.c

192

pr_err("ICST error: tried to set bit 8 of VDW\n");

drivers/clk/versatile/clk-icst.c

194

pr_err("ICST error: tried to use RDW != 22\n");

drivers/clk/versatile/clk-icst.c

230

pr_err("ICST: could not get VCO setting\n");

drivers/clk/versatile/clk-icst.c

321

pr_err("ICST: cannot set PCI frequency %lu\n",

drivers/clk/versatile/clk-icst.c

413

pr_err("could not initialize ICST regmap\n");

drivers/clk/versatile/clk-icst.c

513

pr_err("no parent node for syscon ICST clock\n");

drivers/clk/versatile/clk-icst.c

518

pr_err("no regmap for syscon ICST clock parent\n");

drivers/clk/versatile/clk-icst.c

524

pr_err("no VCO register offset for ICST clock\n");

drivers/clk/versatile/clk-icst.c

528

pr_err("no lock register offset for ICST clock\n");

drivers/clk/versatile/clk-icst.c

554

pr_err("unknown ICST clock %pOF\n", np);

drivers/clk/versatile/clk-icst.c

564

pr_err("error setting up syscon ICST clock %s\n", name);

drivers/clk/versatile/clk-impd1.c

75

pr_err("no regmap for syscon IM-PD1 ICST clock parent\n");

drivers/clk/versatile/clk-versatile.c

69

pr_err("no parent on core module clock\n");

drivers/clk/versatile/clk-versatile.c

75

pr_err("could not remap core module base\n");

drivers/clk/visconti/pll.c

284

pr_err("failed to register pll clock %s : %d\n", name, ret);

drivers/clk/visconti/pll.c

318

pr_err("failed to register clock %s\n", list->name);

drivers/clk/xilinx/xlnx_vcu.c

372

pr_err("VCU PLL is not locked\n");

drivers/clk/zynq/clkc.c

234

pr_err("%s: clock output name not in DT\n", __func__);

drivers/clk/zynq/clkc.c

564

pr_err("Zynq clk %d: register failed with %ld\n",

drivers/clk/zynq/clkc.c

585

pr_err("%s: clkc node not found\n", __func__);

drivers/clk/zynq/clkc.c

590

pr_err("%pOFn: failed to get resource\n", np);

drivers/clk/zynq/clkc.c

599

pr_err("%pOFn: Unable to get I/O memory\n", np);

drivers/clk/zynqmp/clkc.c

675

pr_err("Zynq Ultrascale+ MPSoC clk %s: register failed with %ld\n",

drivers/clocksource/arc_timer.c

332

pr_err("clockevent: missing irq\n");

drivers/clocksource/arc_timer.c

344

pr_err("clockevent: unable to request irq\n");

drivers/clocksource/arc_timer.c

353

pr_err("Failed to setup hotplug state\n");

drivers/clocksource/arc_timer.c

39

pr_err("timer missing clk\n");

drivers/clocksource/arc_timer.c

45

pr_err("Couldn't enable parent clk\n");

drivers/clocksource/arm_arch_timer.c

1051

pr_err("can't register interrupt %d (%d)\n", ppi, err);

drivers/clocksource/arm_arch_timer.c

1172

pr_err("No interrupt available, giving up\n");

drivers/clocksource/arm_arch_timer.c

1221

pr_err(FW_BUG "frequency not available.\n");

drivers/clocksource/arm_arch_timer.c

1227

pr_err("No interrupt available, giving up\n");

drivers/clocksource/armv7m_systick.c

63

pr_err("failed to init clocksource (%d)\n", ret);

drivers/clocksource/asm9260_timer.c

192

pr_err("%pOFn: unable to map resource\n", np);

drivers/clocksource/asm9260_timer.c

198

pr_err("Failed to get clk!\n");

drivers/clocksource/asm9260_timer.c

204

pr_err("Failed to enable clk!\n");

drivers/clocksource/asm9260_timer.c

212

pr_err("Failed to setup irq!\n");

drivers/clocksource/bcm2835_timer.c

119

pr_err("Can't set up timer IRQ\n");

drivers/clocksource/bcm2835_timer.c

78

pr_err("Can't remap registers\n");

drivers/clocksource/bcm2835_timer.c

84

pr_err("Can't read clock-frequency\n");

drivers/clocksource/bcm2835_timer.c

96

pr_err("Can't parse IRQ\n");

drivers/clocksource/bcm_kona_timer.c

166

pr_err("Kona Timer v1 unable to determine clock-frequency\n");

drivers/clocksource/bcm_kona_timer.c

181

pr_err("%s: request_irq() failed\n", "Kona Timer Tick");

drivers/clocksource/bcm_kona_timer.c

83

pr_err("bcm_kona_timer: getting counter failed.\n");

drivers/clocksource/bcm_kona_timer.c

84

pr_err(" Timer will be impacted\n");

drivers/clocksource/clksrc_st_lpc.c

108

pr_err("clksrc-st-lpc: Unable to map iomem\n");

drivers/clocksource/clksrc_st_lpc.c

58

pr_err("clksrc-st-lpc: Failed to register clocksource\n");

drivers/clocksource/clksrc_st_lpc.c

71

pr_err("clksrc-st-lpc: Failed to get LPC clock\n");

drivers/clocksource/clksrc_st_lpc.c

76

pr_err("clksrc-st-lpc: Failed to enable LPC clock\n");

drivers/clocksource/clksrc_st_lpc.c

81

pr_err("clksrc-st-lpc: Failed to get LPC clock rate\n");

drivers/clocksource/clksrc_st_lpc.c

98

pr_err("clksrc-st-lpc: An LPC mode must be provided\n");

drivers/clocksource/dw_apb_timer.c

259

pr_err("failed to request timer irq\n");

drivers/clocksource/exynos_mct.c

353

pr_err("%s: request_irq() failed\n", "mct_comp_irq");

drivers/clocksource/exynos_mct.c

556

pr_err("exynos-mct: too many (%d) interrupts configured in DT\n",

drivers/clocksource/exynos_mct.c

594

pr_err("exynos-mct: cannot register IRQ (cpu%d)\n",

drivers/clocksource/hyperv_timer.c

224

pr_err("Can't register Hyper-V stimer0 GSI. Error %d", ret);

drivers/clocksource/hyperv_timer.c

232

pr_err("Can't request Hyper-V stimer0 IRQ %d. Error %d",

drivers/clocksource/hyperv_timer.c

650

pr_err("Failed to remap Hyper-V TSC page.\n");

drivers/clocksource/ingenic-sysost.c

441

pr_err("%s: Failed to map OST registers\n", __func__);

drivers/clocksource/jcore-pit.c

154

pr_err("Error: Cannot map base address for J-Core PIT\n");

drivers/clocksource/jcore-pit.c

160

pr_err("Error: J-Core PIT has no IRQ\n");

drivers/clocksource/jcore-pit.c

171

pr_err("Error registering clocksource device: %d\n", err);

drivers/clocksource/jcore-pit.c

179

pr_err("Failed to allocate memory for clock event device\n");

drivers/clocksource/jcore-pit.c

187

pr_err("pit irq request failed: %d\n", err);

drivers/clocksource/jcore-pit.c

232

pr_err("Unable to map PIT for cpu %u\n", cpu);

drivers/clocksource/mips-gic-timer.c

151

pr_err("IRQ %d setup failed (%d)\n", gic_timer_irq, ret);

drivers/clocksource/mips-gic-timer.c

261

pr_err("Failed to enable clock\n");

drivers/clocksource/mips-gic-timer.c

269

pr_err("Frequency not specified\n");

drivers/clocksource/mips-gic-timer.c

274

pr_err("IRQ not specified\n");

drivers/clocksource/mps2-timer.c

112

pr_err("failed to get clock for clockevent: %d\n", ret);

drivers/clocksource/mps2-timer.c

118

pr_err("failed to enable clock for clockevent: %d\n", ret);

drivers/clocksource/mps2-timer.c

128

pr_err("failed to map register for clockevent: %d\n", ret);

drivers/clocksource/mps2-timer.c

135

pr_err("failed to get irq for clockevent: %d\n", ret);

drivers/clocksource/mps2-timer.c

162

pr_err("failed to request irq for clockevent: %d\n", ret);

drivers/clocksource/mps2-timer.c

196

pr_err("failed to get clock for clocksource: %d\n", ret);

drivers/clocksource/mps2-timer.c

202

pr_err("failed to enable clock for clocksource: %d\n", ret);

drivers/clocksource/mps2-timer.c

212

pr_err("failed to map register for clocksource: %d\n", ret);

drivers/clocksource/mps2-timer.c

229

pr_err("failed to init clocksource: %d\n", ret);

drivers/clocksource/mxs_timer.c

213

pr_err("%s: failed to get clk\n", __func__);

drivers/clocksource/nomadik-mtu.c

223

pr_err("timer: failed to initialize clock source %s\n", "mtu_0");

drivers/clocksource/nomadik-mtu.c

232

pr_err("%s: request_irq() failed\n", "Nomadik Timer Tick");

drivers/clocksource/nomadik-mtu.c

258

pr_err("Can't remap registers\n");

drivers/clocksource/nomadik-mtu.c

264

pr_err("could not get apb_pclk\n");

drivers/clocksource/nomadik-mtu.c

270

pr_err("could not get timclk\n");

drivers/clocksource/nomadik-mtu.c

276

pr_err("Can't parse IRQ\n");

drivers/clocksource/samsung_pwm_timer.c

282

pr_err("%s: request_irq() failed\n", "samsung_time_irq");

drivers/clocksource/samsung_pwm_timer.c

438

pr_err("%s: failed to map PWM registers\n", __func__);

drivers/clocksource/timer-armada-370-xp.c

250

pr_err("Failed to iomap\n");

drivers/clocksource/timer-armada-370-xp.c

256

pr_err("Failed to iomap\n");

drivers/clocksource/timer-armada-370-xp.c

301

pr_err("Failed to initialize clocksource mmio\n");

drivers/clocksource/timer-armada-370-xp.c

318

pr_err("Failed to request percpu irq\n");

drivers/clocksource/timer-armada-370-xp.c

327

pr_err("Failed to setup hotplug state and timer\n");

drivers/clocksource/timer-armada-370-xp.c

342

pr_err("Failed to get clock\n");

drivers/clocksource/timer-armada-370-xp.c

378

pr_err("Failed to get clock\n");

drivers/clocksource/timer-armada-370-xp.c

402

pr_err("Failed to get clock\n");

drivers/clocksource/timer-atmel-pit.c

179

pr_err("Could not map PIT address\n");

drivers/clocksource/timer-atmel-pit.c

186

pr_err("Unable to get mck clk\n");

drivers/clocksource/timer-atmel-pit.c

193

pr_err("Unable to enable mck\n");

drivers/clocksource/timer-atmel-pit.c

200

pr_err("Unable to get IRQ from DT\n");

drivers/clocksource/timer-atmel-pit.c

229

pr_err("Failed to register clocksource\n");

drivers/clocksource/timer-atmel-pit.c

238

pr_err("Unable to setup IRQ\n");

drivers/clocksource/timer-atmel-st.c

191

pr_err("Unable to get regmap\n");

drivers/clocksource/timer-atmel-st.c

203

pr_err("Unable to get IRQ from DT\n");

drivers/clocksource/timer-atmel-st.c

212

pr_err("Unable to setup IRQ\n");

drivers/clocksource/timer-atmel-st.c

218

pr_err("Unable to get slow clock\n");

drivers/clocksource/timer-atmel-st.c

224

pr_err("Could not enable slow clock\n");

drivers/clocksource/timer-atmel-st.c

230

pr_err("Invalid slow clock rate\n");

drivers/clocksource/timer-cadence-ttc.c

504

pr_err("ERROR: invalid timer base address\n");

drivers/clocksource/timer-cadence-ttc.c

510

pr_err("ERROR: invalid interrupt number\n");

drivers/clocksource/timer-cadence-ttc.c

520

pr_err("ERROR: timer input clock not found\n");

drivers/clocksource/timer-cadence-ttc.c

528

pr_err("ERROR: timer input clock not found\n");

drivers/clocksource/timer-clint.c

178

pr_err("%pOFP: failed to parse irq %d.\n", np, i);

drivers/clocksource/timer-clint.c

185

pr_err("%pOFP: invalid irq %d (hwirq %d)\n",

drivers/clocksource/timer-clint.c

205

pr_err("%pOFP: ipi/timer irq not found\n", np);

drivers/clocksource/timer-clint.c

211

pr_err("%pOFP: could not map registers\n", np);

drivers/clocksource/timer-clint.c

232

pr_err("%pOFP: clocksource register failed [%d]\n", np, rc);

drivers/clocksource/timer-clint.c

241

pr_err("registering percpu irq failed [%d]\n", rc);

drivers/clocksource/timer-clint.c

248

pr_err("unable to create muxed IPIs\n");

drivers/clocksource/timer-clint.c

263

pr_err("%pOFP: cpuhp setup state failed [%d]\n", np, rc);

drivers/clocksource/timer-davinci.c

252

pr_err("Unable to prepare and enable the timer clock\n");

drivers/clocksource/timer-davinci.c

259

pr_err("Unable to request memory region\n");

drivers/clocksource/timer-davinci.c

266

pr_err("Unable to map the register range\n");

drivers/clocksource/timer-davinci.c

302

pr_err("Unable to request the clockevent interrupt\n");

drivers/clocksource/timer-davinci.c

329

pr_err("Unable to register clocksource\n");

drivers/clocksource/timer-davinci.c

361

pr_err("Unable to get the register range for timer\n");

drivers/clocksource/timer-davinci.c

368

pr_err("Unable to get the interrupts for timer\n");

drivers/clocksource/timer-davinci.c

374

pr_err("Unable to get the timer clock\n");

drivers/clocksource/timer-digicolor.c

161

pr_err("Can't map registers\n");

drivers/clocksource/timer-digicolor.c

167

pr_err("Can't parse IRQ\n");

drivers/clocksource/timer-digicolor.c

173

pr_err("Can't get timer clock\n");

drivers/clocksource/timer-econet-en751221.c

135

pr_err("%pOFn: irq_of_parse_and_map failed", np);

drivers/clocksource/timer-econet-en751221.c

142

pr_err("%pOFn: IRQ %d setup failed (%d)\n", np, irq, ret);

drivers/clocksource/timer-econet-en751221.c

179

pr_err("%pOFn: Failed to get CPU clock from DT %ld\n", np, PTR_ERR(clk));

drivers/clocksource/timer-econet-en751221.c

188

pr_err("%pOFn: failed to map register [%d]\n", np, i);

drivers/clocksource/timer-econet-en751221.c

198

pr_err("%pOFn: clocksource_mmio_init failed: %d", np, ret);

drivers/clocksource/timer-ep93xx.c

150

pr_err("Can't remap registers\n");

drivers/clocksource/timer-ep93xx.c

160

pr_err("EP93XX Timer Can't parse IRQ %d", irq);

drivers/clocksource/timer-ep93xx.c

176

pr_err("Failed to request irq %d (ep93xx timer)\n", irq);

drivers/clocksource/timer-fsl-ftm.c

191

pr_err("ftm: setup irq failed: %d\n", err);

drivers/clocksource/timer-fsl-ftm.c

221

pr_err("ftm: init clock source mmio failed: %d\n", err);

drivers/clocksource/timer-fsl-ftm.c

238

pr_err("ftm: Cannot get \"%s\": %ld\n", cnt_name, PTR_ERR(clk));

drivers/clocksource/timer-fsl-ftm.c

243

pr_err("ftm: clock failed to prepare+enable \"%s\": %d\n",

drivers/clocksource/timer-fsl-ftm.c

250

pr_err("ftm: Cannot get \"%s\": %ld\n", ftm_name, PTR_ERR(clk));

drivers/clocksource/timer-fsl-ftm.c

255

pr_err("ftm: clock failed to prepare+enable \"%s\": %d\n",

drivers/clocksource/timer-fsl-ftm.c

290

pr_err("ftm: the prescaler is %lu > %d\n",

drivers/clocksource/timer-fsl-ftm.c

310

pr_err("ftm: unable to map event timer registers\n");

drivers/clocksource/timer-fsl-ftm.c

316

pr_err("ftm: unable to map source timer registers\n");

drivers/clocksource/timer-fsl-ftm.c

323

pr_err("ftm: unable to get IRQ from DT, %d\n", irq);

drivers/clocksource/timer-fttmr010.c

289

pr_err("could not get PCLK\n");

drivers/clocksource/timer-fttmr010.c

294

pr_err("failed to enable PCLK\n");

drivers/clocksource/timer-fttmr010.c

307

pr_err("Can't remap registers\n");

drivers/clocksource/timer-fttmr010.c

314

pr_err("Can't parse IRQ\n");

drivers/clocksource/timer-fttmr010.c

395

pr_err("FTTMR010-TIMER1 no IRQ\n");

drivers/clocksource/timer-goldfish.c

127

pr_err("Cannot allocate '%s' resource\n", timerdrv->res.name);

drivers/clocksource/timer-goldfish.c

145

pr_err("Couldn't register goldfish-timer interrupt\n");

drivers/clocksource/timer-gxp.c

102

pr_err("Can't map timer base registers");

drivers/clocksource/timer-gxp.c

120

pr_err("GXP Timer Can't parse IRQ %d", irq);

drivers/clocksource/timer-gxp.c

129

pr_err("%pOFn init clocksource failed: %d", node, ret);

drivers/clocksource/timer-gxp.c

138

pr_err("%pOFn Can't parse IRQ %d", node, irq);

drivers/clocksource/timer-gxp.c

148

pr_err("%pOFn request_irq() failed: %d", node, ret);

drivers/clocksource/timer-gxp.c

178

pr_err("Gxp Timer not initialized, cannot create watchdog");

drivers/clocksource/timer-gxp.c

184

pr_err("Timer failed to allocate gxp-wdt");

drivers/clocksource/timer-gxp.c

82

pr_err("Can't allocate gxp_timer");

drivers/clocksource/timer-gxp.c

89

pr_err("%pOFn clock not found: %d\n", node, ret);

drivers/clocksource/timer-gxp.c

95

pr_err("%pOFn clock enable failed: %d\n", node, ret);

drivers/clocksource/timer-imx-gpt.c

395

pr_err("i.MX timer: unable to get clk\n");

drivers/clocksource/timer-imx-tpm.c

190

pr_err("tpm: failed to get ipg clk\n");

drivers/clocksource/timer-imx-tpm.c

196

pr_err("tpm: ipg clock enable failed (%d)\n", ret);

drivers/clocksource/timer-integrator-ap.c

174

pr_err("No clock for %pOFn\n", node);

drivers/clocksource/timer-ixp4xx.c

278

pr_err("Can't parse IRQ\n");

drivers/clocksource/timer-keystone.c

152

pr_err("%s: failed to map interrupts\n", __func__);

drivers/clocksource/timer-keystone.c

158

pr_err("%s: failed to map registers\n", __func__);

drivers/clocksource/timer-keystone.c

164

pr_err("%s: failed to get clock\n", __func__);

drivers/clocksource/timer-keystone.c

171

pr_err("%s: failed to enable clock\n", __func__);

drivers/clocksource/timer-keystone.c

200

pr_err("%s: failed to setup irq\n", __func__);

drivers/clocksource/timer-lpc32xx.c

164

pr_err("clock get failed (%ld)\n", PTR_ERR(clk));

drivers/clocksource/timer-lpc32xx.c

170

pr_err("clock enable failed (%d)\n", ret);

drivers/clocksource/timer-lpc32xx.c

176

pr_err("unable to map registers\n");

drivers/clocksource/timer-lpc32xx.c

196

pr_err("failed to init clocksource (%d)\n", ret);

drivers/clocksource/timer-lpc32xx.c

225

pr_err("clock get failed (%ld)\n", PTR_ERR(clk));

drivers/clocksource/timer-lpc32xx.c

231

pr_err("clock enable failed (%d)\n", ret);

drivers/clocksource/timer-lpc32xx.c

237

pr_err("unable to map registers\n");

drivers/clocksource/timer-lpc32xx.c

244

pr_err("get irq failed\n");

drivers/clocksource/timer-lpc32xx.c

268

pr_err("request irq failed\n");

drivers/clocksource/timer-meson6.c

160

pr_err("Can't map registers\n");

drivers/clocksource/timer-meson6.c

166

pr_err("Can't parse IRQ\n");

drivers/clocksource/timer-nxp-pit.c

286

pr_err("Failed to iomap\n");

drivers/clocksource/timer-nxp-pit.c

293

pr_err("Failed to irq_of_parse_and_map\n");

drivers/clocksource/timer-nxp-pit.c

313

pr_err("Failed to initialize clocksource '%pOF'\n", np);

drivers/clocksource/timer-nxp-pit.c

319

pr_err("Failed to initialize clockevent '%pOF'\n", np);

drivers/clocksource/timer-of.c

111

pr_err("Failed to get clock for %pOF\n", np);

drivers/clocksource/timer-of.c

117

pr_err("Failed for enable clock for %pOF\n", np);

drivers/clocksource/timer-of.c

124

pr_err("Failed to get clock rate for %pOF\n", np);

drivers/clocksource/timer-of.c

152

pr_err("Failed to iomap (%s:%s)\n", np->name, of_base->name);

drivers/clocksource/timer-of.c

54

pr_err("Failed to get interrupt %s for %pOF\n",

drivers/clocksource/timer-of.c

62

pr_err("Failed to map interrupt for %pOF\n", np);

drivers/clocksource/timer-of.c

70

pr_err("Failed to request irq %d for %pOF\n", of_irq->irq, np);

drivers/clocksource/timer-orion.c

123

pr_err("%pOFn: unable to map resource\n", np);

drivers/clocksource/timer-orion.c

129

pr_err("%pOFn: unable to get clk\n", np);

drivers/clocksource/timer-orion.c

135

pr_err("Failed to prepare clock\n");

drivers/clocksource/timer-orion.c

142

pr_err("%pOFn: unable to parse timer1 irq\n", np);

drivers/clocksource/timer-orion.c

160

pr_err("Failed to initialize mmio timer\n");

drivers/clocksource/timer-orion.c

170

pr_err("%pOFn: unable to setup irq\n", np);

drivers/clocksource/timer-owl.c

124

pr_err("Can't map timer registers\n");

drivers/clocksource/timer-owl.c

133

pr_err("Can't parse timer1 IRQ\n");

drivers/clocksource/timer-owl.c

140

pr_err("Failed to get clock for clocksource (%d)\n", ret);

drivers/clocksource/timer-owl.c

153

pr_err("Failed to register clocksource (%d)\n", ret);

drivers/clocksource/timer-owl.c

162

pr_err("failed to request irq %d\n", timer1_irq);

drivers/clocksource/timer-pistachio.c

158

pr_err("cannot iomap\n");

drivers/clocksource/timer-pistachio.c

164

pr_err("cannot get peripheral regmap (%ld)\n",

drivers/clocksource/timer-pistachio.c

177

pr_err("clock get failed (%ld)\n", PTR_ERR(sys_clk));

drivers/clocksource/timer-pistachio.c

183

pr_err("clock get failed (%lu)\n", PTR_ERR(fast_clk));

drivers/clocksource/timer-pistachio.c

189

pr_err("failed to enable clock (%d)\n", ret);

drivers/clocksource/timer-pistachio.c

195

pr_err("failed to enable clock (%d)\n", ret);

drivers/clocksource/timer-probe.c

33

pr_err("Failed to initialize '%pOF': %d\n", np,

drivers/clocksource/timer-pxa.c

160

pr_err("Failed to setup irq\n");

drivers/clocksource/timer-pxa.c

167

pr_err("Failed to init clocksource\n");

drivers/clocksource/timer-pxa.c

185

pr_err("%pOFn: unable to map resource\n", np);

drivers/clocksource/timer-qcom.c

123

pr_err("request_irq failed\n");

drivers/clocksource/timer-qcom.c

162

pr_err("memory allocation failed for clockevents\n");

drivers/clocksource/timer-qcom.c

171

pr_err("request_percpu_irq failed\n");

drivers/clocksource/timer-qcom.c

188

pr_err("clocksource_register failed\n");

drivers/clocksource/timer-qcom.c

207

pr_err("Failed to map event base\n");

drivers/clocksource/timer-qcom.c

214

pr_err("Can't get irq\n");

drivers/clocksource/timer-qcom.c

224

pr_err("Failed to parse DGT resource\n");

drivers/clocksource/timer-qcom.c

230

pr_err("Failed to map source base\n");

drivers/clocksource/timer-qcom.c

236

pr_err("Unknown frequency\n");

drivers/clocksource/timer-ralink.c

107

pr_err("Failed to request irq %d (%s)\n", irq, name);

drivers/clocksource/timer-ralink.c

132

pr_err("%pOFn: request_irq failed", np);

drivers/clocksource/timer-riscv.c

166

pr_err("Failed to find irq_domain for INTC node [%pfwP]\n",

drivers/clocksource/timer-riscv.c

173

pr_err("Failed to map timer interrupt for node [%pfwP]\n", intc_fwnode);

drivers/clocksource/timer-riscv.c

179

pr_err("RISCV timer registration failed [%d]\n", error);

drivers/clocksource/timer-riscv.c

189

pr_err("registering percpu irq failed [%d]\n", error);

drivers/clocksource/timer-riscv.c

202

pr_err("cpu hp setup state failed for RISCV timer [%d]\n",

drivers/clocksource/timer-rockchip.c

137

pr_err("Failed to get base address for '%s'\n", TIMER_NAME);

drivers/clocksource/timer-rockchip.c

149

pr_err("Failed to get pclk for '%s'\n", TIMER_NAME);

drivers/clocksource/timer-rockchip.c

155

pr_err("Failed to enable pclk for '%s'\n", TIMER_NAME);

drivers/clocksource/timer-rockchip.c

163

pr_err("Failed to get timer clock for '%s'\n", TIMER_NAME);

drivers/clocksource/timer-rockchip.c

169

pr_err("Failed to enable timer clock\n");

drivers/clocksource/timer-rockchip.c

179

pr_err("Failed to map interrupts for '%s'\n", TIMER_NAME);

drivers/clocksource/timer-rockchip.c

234

pr_err("Failed to initialize '%s': %d\n",

drivers/clocksource/timer-rockchip.c

274

pr_err("Failed to register clocksource\n");

drivers/clocksource/timer-rockchip.c

299

pr_err("Too many timer definitions for '%s'\n", TIMER_NAME);

drivers/clocksource/timer-rtl-otto.c

271

pr_err("setup of timer %d failed\n", cpu);

drivers/clocksource/timer-rtl-otto.c

286

pr_err(" setup of timer %d as clocksource failed", clkidx);

drivers/clocksource/timer-rtl-otto.c

292

pr_err("timer registration failed\n");

drivers/clocksource/timer-sp804.c

251

pr_err("request_irq() failed\n");

drivers/clocksource/timer-sp804.c

313

pr_err("%pOFn clock not found: %d\n", np,

drivers/clocksource/timer-sp804.c

379

pr_err("Failed to iomap\n");

drivers/clocksource/timer-sp804.c

385

pr_err("Failed to get clock\n");

drivers/clocksource/timer-sp804.c

73

pr_err("%s clock not found: %ld\n", name, PTR_ERR(clk));

drivers/clocksource/timer-sp804.c

79

pr_err("clock failed to enable: %d\n", err);

drivers/clocksource/timer-sun4i.c

197

pr_err("Failed to register clocksource\n");

drivers/clocksource/timer-tegra.c

309

pr_err("failed to map irq for cpu%d\n", cpu);

drivers/clocksource/timer-tegra.c

326

pr_err("failed to set up irq for cpu%d: %d\n",

drivers/clocksource/timer-tegra.c

340

pr_err("failed to register clocksource: %d\n", ret);

drivers/clocksource/timer-tegra.c

350

pr_err("failed to set up cpu hp state: %d\n", ret);

drivers/clocksource/timer-ti-32k.c

129

pr_err("Can't ioremap 32k timer base\n");

drivers/clocksource/timer-ti-32k.c

156

pr_err("32k_counter: can't register clocksource\n");

drivers/clocksource/timer-ti-dm-systimer.c

131

pr_err("%s failed with %i\n", __func__, ret);

drivers/clocksource/timer-ti-dm-systimer.c

382

pr_err("%s: clock source init failed: %i\n", __func__, error);

drivers/clocksource/timer-ti-dm-systimer.c

526

pr_err("could not enable timer fck on resume: %i\n", error);

drivers/clocksource/timer-ti-dm-systimer.c

745

pr_err("could not enable timer fck on resume: %i\n", error);

drivers/clocksource/timer-ti-dm-systimer.c

797

pr_err("Could not register clocksource %pOF\n", np);

drivers/clocksource/timer-ti-dm-systimer.c

821

pr_err("%s: unable to detect system timers, update dtb?\n",

drivers/clocksource/timer-ti-dm.c

1034

pr_err("%s: timer not available or enabled.\n", __func__);

drivers/clocksource/timer-ti-dm.c

1062

pr_err("%s: timer not iavailable or enabled.\n", __func__);

drivers/clocksource/timer-ti-dm.c

1082

pr_err("%s: timer not available.\n", __func__);

drivers/clocksource/timer-ti-dm.c

1114

pr_err("%s:timer is not available or enabled.%p\n", __func__, (void *)timer);

drivers/clocksource/timer-ti-dm.c

1129

pr_err("%s: Failed to set timer capture configuration.\n", __func__);

drivers/clocksource/timer-ti-dm.c

453

pr_err("%s: %s not found\n", __func__, parent_name);

drivers/clocksource/timer-ti-dm.c

459

pr_err("%s: failed to set %s as parent\n", __func__,

drivers/clocksource/timer-vt8500.c

110

pr_err("%s: Missing iobase description in Device Tree\n",

drivers/clocksource/timer-vt8500.c

117

pr_err("%s: Missing irq description in Device Tree\n",

drivers/clocksource/timer-vt8500.c

128

pr_err("%s: clocksource_register failed for %s\n",

drivers/clocksource/timer-vt8500.c

139

pr_err("%s: setup_irq failed for %s\n", __func__,

drivers/clocksource/timer-zevio.c

137

pr_err("Timer clock not found! (error %d)\n", ret);

drivers/clocksource/timer-zevio.c

177

pr_err("%s: request_irq() failed\n",

drivers/comedi/comedi_fops.c

3632

pr_err("invalid value for module parameter \"comedi_num_legacy_minors\". Valid values are 0 through %i.\n",

drivers/comedi/comedi_fops.c

3656

pr_err("failed to create class\n");

drivers/comedi/drivers/comedi_test.c

867

pr_err("comedi_test: unable to register driver\n");

drivers/comedi/drivers/tests/unittest.h

35

pr_err("FAIL %s():%i " fmt, __func__, __LINE__, \

drivers/connector/cn_queue.c

30

pr_err("Failed to create new callback queue.\n");

drivers/counter/microchip-tcb-capture.c

120

pr_err("Invalid channels number or id for quadrature mode\n");

drivers/cpufreq/amd-pstate-ut.c

102

pr_err("%s amd pstate must be enabled!\n", __func__);

drivers/cpufreq/amd-pstate-ut.c

133

pr_err("%s cppc_get_perf_caps ret=%d error!\n", __func__, ret);

drivers/cpufreq/amd-pstate-ut.c

144

pr_err("%s read CPPC_CAP1 ret=%d error!\n", __func__, ret);

drivers/cpufreq/amd-pstate-ut.c

156

pr_err("%s cpu%d highest=%d %d highest perf doesn't match\n",

drivers/cpufreq/amd-pstate-ut.c

163

pr_err("%s cpu%d nominal=%d %d lowest_nonlinear=%d %d lowest=%d %d, they should be equal!\n",

drivers/cpufreq/amd-pstate-ut.c

174

pr_err("%s cpu%d highest=%d >= nominal=%d > lowest_nonlinear=%d > lowest=%d > 0, the formula is incorrect!\n",

drivers/cpufreq/amd-pstate-ut.c

206

pr_err("%s cpu%d max=%d >= nominal=%d > lowest_nonlinear=%d > min=%d > 0, the formula is incorrect!\n",

drivers/cpufreq/amd-pstate-ut.c

213

pr_err("%s cpu%d cpudata_lowest_nonlinear_freq=%d policy_min=%d, they should be equal!\n",

drivers/cpufreq/amd-pstate-ut.c

221

pr_err("%s cpu%d policy_max=%d should be equal cpu_max=%d or cpu_nominal=%d !\n",

drivers/cpufreq/amd-pstate-ut.c

227

pr_err("%s cpu%d must support boost!\n", __func__, cpu);

drivers/cpufreq/amd-pstate-ut.c

281

pr_err("%-4d %-20s\t fail: %d!\n", i+1, amd_pstate_ut_cases[i].name, ret);

drivers/cpufreq/amd-pstate-ut.c

77

pr_err("%s the _CPC object is not present in SBIOS!\n", __func__);

drivers/cpufreq/amd-pstate-ut.c

97

pr_err("%s rdmsrq_safe MSR_AMD_CPPC_ENABLE ret=%d error!\n", __func__, ret);

drivers/cpufreq/amd-pstate.c

1845

pr_err("failed to register with return %d\n", ret);

drivers/cpufreq/amd-pstate.c

1854

pr_err("sysfs attribute export failed with error %d.\n", ret);

drivers/cpufreq/amd-pstate.c

316

pr_err("failed to set energy perf value (%d)\n", ret);

drivers/cpufreq/amd-pstate.c

789

pr_err("Boost mode is not supported by this processor or SBIOS\n");

drivers/cpufreq/amd-pstate.c

966

pr_err("min_freq(%d) or max_freq(%d) or nominal_freq(%d) value is incorrect\n",

drivers/cpufreq/amd-pstate.c

972

pr_err("lowest_nonlinear_freq(%d) value is out of range [min_freq(%d), nominal_freq(%d)]\n",

drivers/cpufreq/apple-soc-cpufreq.c

250

pr_err("failed to get cpu%d device\n", policy->cpu);

drivers/cpufreq/armada-37xx-cpufreq.c

120

pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);

drivers/cpufreq/armada-37xx-cpufreq.c

231

pr_err("L0 VDD MIN %d is not correct.\n", l0_vdd_min);

drivers/cpufreq/armada-8k-cpufreq.c

163

pr_err("Cannot get CPU %d\n", cpu);

drivers/cpufreq/armada-8k-cpufreq.c

170

pr_err("Cannot get clock for CPU %d\n", cpu);

drivers/cpufreq/bmips-cpufreq.c

135

pr_err("%s: couldn't determine frequency table (%ld).\n",

drivers/cpufreq/cppc_cpufreq.c

625

pr_err("Error in acquiring _CPC/_PSD data for CPU%d.\n", cpu);

drivers/cpufreq/cpufreq-dt.c

93

pr_err("failed to find data for cpu%d\n", policy->cpu);

drivers/cpufreq/cpufreq-nforce2.c

177

pr_err("FSB %d is out of range!\n", fsb);

drivers/cpufreq/cpufreq-nforce2.c

183

pr_err("Error while reading the FSB\n");

drivers/cpufreq/cpufreq-nforce2.c

279

pr_err("Changing FSB to %d failed\n", target_fsb);

drivers/cpufreq/cpufreq.c

1189

pr_err("%s: Failed to start governor\n", __func__);

drivers/cpufreq/cpufreq.c

1497

pr_err("%s: ->get() failed\n", __func__);

drivers/cpufreq/cpufreq.c

1568

pr_err("%s: Failed to initialize policy for cpu: %d (%d)\n",

drivers/cpufreq/cpufreq.c

1698

pr_err("%s: Failed to start governor\n", __func__);

drivers/cpufreq/cpufreq.c

1960

pr_err("%s: unable to set suspend-freq: %u. err: %d\n",

drivers/cpufreq/cpufreq.c

1995

pr_err("%s: Failed to suspend driver: %s\n", __func__,

drivers/cpufreq/cpufreq.c

2029

pr_err("%s: Failed to resume driver: %s\n", __func__,

drivers/cpufreq/cpufreq.c

2037

pr_err("%s: Failed to start governor for CPU%u's policy\n",

drivers/cpufreq/cpufreq.c

212

pr_err("%s: No %s associated to cpu: %d\n",

drivers/cpufreq/cpufreq.c

2289

pr_err("%s: Failed to change to intermediate frequency: %d\n",

drivers/cpufreq/cpufreq.c

2332

pr_err("%s: Failed to change cpu frequency: %d\n", __func__,

drivers/cpufreq/cpufreq.c

2793

pr_err("%s: Policy frequency update failed\n", __func__);

drivers/cpufreq/cpufreq.c

2839

pr_err("%s: Cannot %s BOOST\n",

drivers/cpufreq/cpufreq.c

2856

pr_err("%s: cannot register global BOOST sysfs file\n",

drivers/cpufreq/cpufreq.c

585

pr_err("%s: Cannot %s BOOST!\n",

drivers/cpufreq/cpufreq_governor.c

469

pr_err("initialization failed (dbs_data kobject init error %d)\n", ret);

drivers/cpufreq/e_powersaver.c

167

pr_err("Timeout!\n");

drivers/cpufreq/highbank-cpufreq.c

72

pr_err("failed to get highbank cpufreq device\n");

drivers/cpufreq/highbank-cpufreq.c

78

pr_err("failed to find highbank cpufreq node\n");

drivers/cpufreq/highbank-cpufreq.c

85

pr_err("failed to get cpu0 clock: %d\n", ret);

drivers/cpufreq/highbank-cpufreq.c

91

pr_err("failed to register clk notifier: %d\n", ret);

drivers/cpufreq/imx6q-cpufreq.c

336

pr_err("failed to get cpu0 device\n");

drivers/cpufreq/longhaul.c

713

pr_err("Can't enable access to port 0x22\n");

drivers/cpufreq/longhaul.c

880

pr_err("No ACPI support: Unsupported northbridge\n");

drivers/cpufreq/longhaul.c

924

pr_err("Option \"enable\" not set - Aborting\n");

drivers/cpufreq/longhaul.c

929

pr_err("More than 1 CPU detected, longhaul disabled\n");

drivers/cpufreq/longhaul.c

935

pr_err("APIC detected. Longhaul is currently broken in this configuration.\n");

drivers/cpufreq/longhaul.c

943

pr_err("Use acpi-cpufreq driver for VIA C7\n");

drivers/cpufreq/mediatek-cpufreq.c

589

pr_err("dvfs info for cpu%d is not initialized.\n",

drivers/cpufreq/mediatek-cpufreq.c

789

pr_err("failed to register mtk-cpufreq platform device\n");

drivers/cpufreq/mvebu-cpufreq.c

66

pr_err("Cannot get CPU %d\n", cpu);

drivers/cpufreq/mvebu-cpufreq.c

72

pr_err("Cannot get clock for CPU %d\n", cpu);

drivers/cpufreq/pcc-cpufreq.c

593

pr_err("%s: Too many CPUs, dynamic performance scaling disabled\n",

drivers/cpufreq/pcc-cpufreq.c

595

pr_err("%s: Try to enable another scaling driver through BIOS settings\n",

drivers/cpufreq/pcc-cpufreq.c

597

pr_err("%s: and complain to the system vendor\n", __func__);

drivers/cpufreq/pmac32-cpufreq.c

485

pr_err("bus-frequencies incorrect or missing\n");

drivers/cpufreq/pmac32-cpufreq.c

491

pr_err("processor-to-bus-ratio*2 missing\n");

drivers/cpufreq/pmac32-cpufreq.c

555

pr_err("missing cpu-vcore-select gpio\n");

drivers/cpufreq/pmac64-cpufreq.c

370

pr_err("Unsupported CPU version\n");

drivers/cpufreq/pmac64-cpufreq.c

405

pr_err("Can't find root of device tree\n");

drivers/cpufreq/pmac64-cpufreq.c

414

pr_err("Can't find required platform function\n");

drivers/cpufreq/pmac64-cpufreq.c

494

pr_err("Can't find cpuid EEPROM !\n");

drivers/cpufreq/pmac64-cpufreq.c

512

pr_err("Can't find i2c clock chip !\n");

drivers/cpufreq/pmac64-cpufreq.c

540

pr_err("Can't find platform functions !\n");

drivers/cpufreq/pmac64-cpufreq.c

568

pr_err("Can't find CPU frequency !\n");

drivers/cpufreq/pmac64-cpufreq.c

595

pr_err("Can't calculate low frequency !\n");

drivers/cpufreq/pmac64-cpufreq.c

654

pr_err("Can't find any CPU node\n");

drivers/cpufreq/powernow-k6.c

144

pr_err("invalid target frequency\n");

drivers/cpufreq/powernow-k6.c

178

pr_err("invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");

drivers/cpufreq/powernow-k6.c

197

pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");

drivers/cpufreq/powernow-k8.c

1001

pr_err("failing init, change pending bit set\n");

drivers/cpufreq/powernow-k8.c

1048

pr_err(FW_BUG "No ACPI _PSS objects for CPU other than CPU0. Complain to your BIOS vendor.\n");

drivers/cpufreq/powernow-k8.c

153

pr_err("internal error - overflow on fid write\n");

drivers/cpufreq/powernow-k8.c

167

pr_err("Hardware error - pending bit very stuck - no further pstate changes possible\n");

drivers/cpufreq/powernow-k8.c

175

pr_err("vid change on fid trans, old 0x%x, new 0x%x\n",

drivers/cpufreq/powernow-k8.c

181

pr_err("fid trans failed, fid 0x%x, curr 0x%x\n", fid,

drivers/cpufreq/powernow-k8.c

197

pr_err("internal error - overflow on vid write\n");

drivers/cpufreq/powernow-k8.c

211

pr_err("internal error - pending bit very stuck - no further pstate changes possible\n");

drivers/cpufreq/powernow-k8.c

217

pr_err("fid changed on vid trans, old 0x%x new 0x%x\n",

drivers/cpufreq/powernow-k8.c

223

pr_err("vid trans failed, vid 0x%x, curr 0x%x\n",

drivers/cpufreq/powernow-k8.c

267

pr_err("failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",

drivers/cpufreq/powernow-k8.c

324

pr_err("ph1 err, currfid changed 0x%x\n", data->currfid);

drivers/cpufreq/powernow-k8.c

341

pr_err("ph2 null fid transition 0x%x\n", data->currfid);

drivers/cpufreq/powernow-k8.c

388

pr_err("ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n",

drivers/cpufreq/powernow-k8.c

394

pr_err("ph2: vid changed, save 0x%x, curr 0x%x\n",

drivers/cpufreq/powernow-k8.c

421

pr_err("ph3: bad fid change, save 0x%x, curr 0x%x\n",

drivers/cpufreq/powernow-k8.c

427

pr_err("ph3: failed vid transition\n, req 0x%x, curr 0x%x",

drivers/cpufreq/powernow-k8.c

500

pr_err(FW_BUG "vid %d invalid : 0x%x\n", j,

drivers/cpufreq/powernow-k8.c

506

pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j);

drivers/cpufreq/powernow-k8.c

511

pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j);

drivers/cpufreq/powernow-k8.c

515

pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j);

drivers/cpufreq/powernow-k8.c

520

pr_err(FW_BUG "two low fids - %d : 0x%x\n", j,

drivers/cpufreq/powernow-k8.c

528

pr_err(FW_BUG "lastfid invalid\n");

drivers/cpufreq/powernow-k8.c

574

pr_err("PST out of sequence\n");

drivers/cpufreq/powernow-k8.c

580

pr_err("no p states to transition\n");

drivers/cpufreq/powernow-k8.c

643

pr_err(FW_BUG "PSB table is not v1.4\n");

drivers/cpufreq/powernow-k8.c

649

pr_err(FW_BUG "unknown flags\n");

drivers/cpufreq/powernow-k8.c

678

pr_err(FW_BUG "numpst must be 1\n");

drivers/cpufreq/powernow-k8.c

704

pr_err(FW_BUG "No PSB or ACPI _PSS objects\n");

drivers/cpufreq/powernow-k8.c

705

pr_err("Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup\n");

drivers/cpufreq/powernow-k8.c

778

pr_err("unable to alloc powernow_k8_data cpumask\n");

drivers/cpufreq/powernow-k8.c

872

pr_err(FW_WARN "Invalid zero transition latency\n");

drivers/cpufreq/powernow-k8.c

944

pr_err("failing targ, change pending bit set\n");

drivers/cpufreq/powernow-k8.c

972

pr_err("transition frequency failed\n");

drivers/cpufreq/pxa2xx-cpufreq.c

124

pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax);

drivers/cpufreq/pxa3xx-cpufreq.c

202

pr_err("failed to setup frequency table\n");

drivers/cpufreq/qcom-cpufreq-hw.c

524

pr_err("%s: failed to get cpu%d device\n", __func__,

drivers/cpufreq/qoriq-cpufreq.c

177

pr_err("%s: no clock information\n", __func__);

drivers/cpufreq/qoriq-cpufreq.c

60

pr_err("%s: can't get bus frequency %ld\n",

drivers/cpufreq/qoriq-cpufreq.c

95

pr_err("%s: no clock for cpu %d\n", __func__, i);

drivers/cpufreq/raspberrypi-cpufreq.c

29

pr_err("Cannot get CPU for cpufreq driver\n");

drivers/cpufreq/s3c64xx-cpufreq.c

116

pr_err("Unable to check supported voltages\n");

drivers/cpufreq/s3c64xx-cpufreq.c

155

pr_err("Unable to obtain ARMCLK: %ld\n",

drivers/cpufreq/s3c64xx-cpufreq.c

163

pr_err("Failed to obtain VDDARM: %ld\n", PTR_ERR(vddarm));

drivers/cpufreq/s3c64xx-cpufreq.c

164

pr_err("Only frequency scaling available\n");

drivers/cpufreq/s3c64xx-cpufreq.c

71

pr_err("Failed to set VDDARM for %dkHz: %d\n",

drivers/cpufreq/s3c64xx-cpufreq.c

80

pr_err("Failed to set rate %dkHz: %d\n",

drivers/cpufreq/s3c64xx-cpufreq.c

91

pr_err("Failed to set VDDARM for %dkHz: %d\n",

drivers/cpufreq/s3c64xx-cpufreq.c

94

pr_err("Failed to restore original clock rate\n");

drivers/cpufreq/s5pv210-cpufreq.c

207

pr_err("Cannot find DMC port\n");

drivers/cpufreq/s5pv210-cpufreq.c

236

pr_err("Denied access to %s as it is disabled temporarily\n",

drivers/cpufreq/s5pv210-cpufreq.c

531

pr_err("CPUFreq doesn't support this memory type\n");

drivers/cpufreq/sc520_freq.c

111

pr_err("sc520_freq: error: failed to remap memory\n");

drivers/cpufreq/sc520_freq.c

42

pr_err("error: cpuctl register has unexpected value %02x\n",

drivers/cpufreq/scmi-cpufreq.c

209

pr_err("failed to get cpu%d device\n", policy->cpu);

drivers/cpufreq/scpi-cpufreq.c

101

pr_err("failed to get cpu%d device\n", policy->cpu);

drivers/cpufreq/spear-cpufreq.c

122

pr_err("Failed to get src clk\n");

drivers/cpufreq/spear-cpufreq.c

138

pr_err("clk_round_rate failed for cpu src clock\n");

drivers/cpufreq/spear-cpufreq.c

148

pr_err("CPU Freq: cpu clk_set_rate failed: %d\n", ret);

drivers/cpufreq/spear-cpufreq.c

179

pr_err("No cpu node found\n");

drivers/cpufreq/spear-cpufreq.c

189

pr_err("Invalid cpufreq_tbl\n");

drivers/cpufreq/spear-cpufreq.c

211

pr_err("Unable to get CPU clock\n");

drivers/cpufreq/spear-cpufreq.c

220

pr_err("failed register driver: %d\n", ret);

drivers/cpufreq/spear-cpufreq.c

65

pr_err("Failed to get %s clock\n", sys_clk_src[pclk]);

drivers/cpufreq/spear-cpufreq.c

83

pr_err("failed to get cpu's parent (sys) clock\n");

drivers/cpufreq/spear-cpufreq.c

90

pr_err("Failed to set sys clk rate to %lu\n", newfreq);

drivers/cpufreq/spear-cpufreq.c

96

pr_err("Failed to set sys clk parent\n");

drivers/cpufreq/speedstep-ich.c

141

pr_err("change failed - I/O error\n");

drivers/cpufreq/speedstep-ich.c

73

pr_err("could not find speedstep register\n");

drivers/cpufreq/speedstep-ich.c

79

pr_err("could not find speedstep register\n");

drivers/cpufreq/speedstep-lib.c

157

pr_err("PCORE - MSR_FSB_FREQ undefined value\n");

drivers/cpufreq/speedstep-smi.c

207

pr_err("change to state %u failed with new_state %u and result %u\n",

drivers/cpufreq/sun50i-cpufreq-nvmem.c

293

pr_err("Failed to register platform device\n");

drivers/cpufreq/tegra186-cpufreq.c

110

pr_err("%s: failed to get cpu%d device\n", __func__, policy->cpu);

drivers/cpufreq/tegra194-cpufreq.c

438

pr_err("%s: failed to get cpu%d device\n", __func__, policy->cpu);

drivers/cpufreq/tegra194-cpufreq.c

692

pr_err("cpufreq: wrong num of cpus or clusters in soc data\n");

drivers/cpufreq/ti-cpufreq.c

539

pr_err("%s: Failed to get device for CPU0\n", __func__);

drivers/cpufreq/vexpress-spc-cpufreq.c

167

pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n",

drivers/cpufreq/vexpress-spc-cpufreq.c

418

pr_err("%s: failed to get cpu%d device\n", __func__,

drivers/cpufreq/vexpress-spc-cpufreq.c

456

pr_err("%s: failed to get cpu%d device\n", __func__,

drivers/cpuidle/cpuidle-arm.c

119

pr_err("CPU %d failed to init idle CPU ops\n", cpu);

drivers/cpuidle/cpuidle-cps.c

154

pr_err("Failed to register CPS cpuidle driver\n");

drivers/cpuidle/cpuidle-cps.c

167

pr_err("Failed to register CPU%d cpuidle device\n",

drivers/cpuidle/cpuidle-psci-domain.c

102

pr_err("failed to init PM domain ret=%d %pOF\n", ret, np);

drivers/cpuidle/cpuidle-psci-domain.c

176

pr_err("failed to create CPU PM domains ret=%d\n", ret);

drivers/cpuidle/cpuidle-psci.c

408

pr_err("CPU %d failed to PSCI idle\n", cpu);

drivers/cpuidle/cpuidle-psci.c

486

pr_err("Failed to create psci-cpuidle device\n");

drivers/cpuidle/cpuidle-pseries.c

179

pr_err("xcede: Error parsing CEDE_LATENCY_TOKEN\n");

drivers/cpuidle/cpuidle-pseries.c

189

pr_err("xcede: Expected record-size %lu. Observed size %u.\n",

drivers/cpuidle/cpuidle-riscv-sbi.c

328

pr_err("HART%ld: failed to init idle states\n",

drivers/cpuidle/cpuidle-riscv-sbi.c

419

pr_err("failed to init PM domain ret=%d %pOF\n", ret, np);

drivers/cpuidle/cpuidle-riscv-sbi.c

476

pr_err("failed to create CPU PM domains ret=%d\n", ret);

drivers/cpuidle/cpuidle-tegra.c

59

pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n",

drivers/cpuidle/cpuidle-tegra.c

87

pr_err("secondary CPU taking too long to park\n");

drivers/cpuidle/cpuidle-tegra.c

92

pr_err("timed out waiting secondaries to park\n");

drivers/cpuidle/cpuidle.c

781

pr_err("failed to register cpuidle driver\n");

drivers/cpuidle/cpuidle.c

802

pr_err("Failed to register cpuidle device for cpu%d\n", cpu);

drivers/cpuidle/dt_idle_genpd.c

127

pr_err("failed to alloc PM domain %pOF\n", np);

drivers/cpuidle/dt_idle_states.c

197

pr_err("Parsing idle state node %pOF failed with err %d\n",

drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c

281

pr_err("%s OVERFLOW %llu\n", __func__, j);

drivers/crypto/allwinner/sun8i-ce/sun8i-ce-hash.c

309

pr_err("%s OVERFLOW %llu\n", __func__, j);

drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c

440

pr_err("%s OVERFLOW %llu\n", __func__, j);

drivers/crypto/allwinner/sun8i-ss/sun8i-ss-hash.c

468

pr_err("%s OVERFLOW %llu\n", __func__, j);

drivers/crypto/amcc/crypto4xx_alg.c

500

pr_err("aes_prepareenckey() failed: %d\n", rc);

drivers/crypto/amcc/crypto4xx_alg.c

555

pr_err("GCM hash key setting failed = %d\n", rc);

drivers/crypto/amcc/crypto4xx_core.c

584

pr_err("pad fail error\n");

drivers/crypto/amcc/crypto4xx_core.c

586

pr_err("seqnum fail\n");

drivers/crypto/amcc/crypto4xx_core.c

588

pr_err("error _notify\n");

drivers/crypto/amcc/crypto4xx_core.c

589

pr_err("aead return err status = 0x%02x\n",

drivers/crypto/amcc/crypto4xx_core.c

591

pr_err("pd pad_ctl = 0x%08x\n",

drivers/crypto/atmel-ecc.c

256

pr_err("tfm - i2c_client binding failed\n");

drivers/crypto/axis/artpec6_crypto.c

1719

pr_err("%s: Invalid key length %zu!\n",

drivers/crypto/axis/artpec6_crypto.c

1751

pr_err("%s: Invalid cipher mode %d!\n",

drivers/crypto/axis/artpec6_crypto.c

2237

pr_err("Invalid length (%d) of HMAC key\n",

drivers/crypto/axis/artpec6_crypto.c

2283

pr_err("%s: Unsupported hash type 0x%x\n", MODULE_NAME, type);

drivers/crypto/axis/artpec6_crypto.c

553

pr_err("No free OUT DMA descriptors available!\n");

drivers/crypto/axis/artpec6_crypto.c

586

pr_err("No free OUT DMA descriptors available!\n");

drivers/crypto/axis/artpec6_crypto.c

745

pr_err("No free IN DMA descriptors available!\n");

drivers/crypto/axis/artpec6_crypto.c

880

pr_err("EOL unexpected %zu bytes left\n", count);

drivers/crypto/axis/artpec6_crypto.c

937

pr_err("EOL unexpected %zu bytes left\n", count);

drivers/crypto/axis/artpec6_crypto.c

958

pr_err("%s: OUT descriptor list is %s\n",

drivers/crypto/axis/artpec6_crypto.c

982

pr_err("%s: IN descriptor list is %s\n",

drivers/crypto/bcm/cipher.c

1103

pr_err("%s(): failed to copy dst sg to mbox msg. expected len %u, datalen %u",

drivers/crypto/bcm/cipher.c

1192

pr_err("%s(): failed to copy assoc sg to mbox msg",

drivers/crypto/bcm/cipher.c

1214

pr_err("%s(): failed to copy src sg to mbox msg",

drivers/crypto/bcm/cipher.c

1629

pr_err("%s(): no request context", __func__);

drivers/crypto/bcm/cipher.c

163

pr_err("%s(): failed to copy dst sg to mbox msg. chunksize %u, datalen %u",

drivers/crypto/bcm/cipher.c

1836

pr_err("%s() Error: unknown cipher alg\n", __func__);

drivers/crypto/bcm/cipher.c

226

pr_err("%s(): failed to copy src sg to mbox msg",

drivers/crypto/bcm/cipher.c

2267

pr_err("%s() Error: Invalid key length\n", __func__);

drivers/crypto/bcm/cipher.c

2271

pr_err("%s() Error: unknown hash alg\n", __func__);

drivers/crypto/bcm/cipher.c

2367

pr_err("%s() Error: unknown hash alg\n", __func__);

drivers/crypto/bcm/cipher.c

2371

pr_err("%s() Error %d computing shash for %s\n",

drivers/crypto/bcm/cipher.c

2606

pr_err

drivers/crypto/bcm/cipher.c

2635

pr_err("%s() Error: Unable to find start of src data\n",

drivers/crypto/bcm/cipher.c

2653

pr_err("%s() Error: Unable to find start of dst data\n",

drivers/crypto/bcm/cipher.c

2775

pr_err("%s() Error: Unknown cipher alg\n", __func__);

drivers/crypto/bcm/cipher.c

4182

pr_err("%s() Error: failed to allocate fallback for %s\n",

drivers/crypto/bcm/cipher.c

605

pr_err("%s(): failed to copy src sg to mbox msg",

drivers/crypto/bcm/cipher.c

822

pr_err("Failed to create SPU request header\n");

drivers/crypto/bcm/cipher.c

927

pr_err("%s() Error : unknown hmac type\n", __func__);

drivers/crypto/bcm/spu.c

1116

pr_err("%s() Warning: Error result from SPU: %#08x\n",

drivers/crypto/bcm/spu.c

1148

pr_err("%s(): Invalid IV len %d for CCM mode, should be %d\n",

drivers/crypto/bcm/util.c

223

pr_err("%s: Crypto %s allocation error %d\n", __func__, name, rc);

drivers/crypto/bcm/util.c

238

pr_err("%s: Could not setkey %s shash\n", __func__, name);

drivers/crypto/bcm/util.c

245

pr_err("%s: Could not init %s shash\n", __func__, name);

drivers/crypto/bcm/util.c

250

pr_err("%s: Could not update1\n", __func__);

drivers/crypto/bcm/util.c

256

pr_err("%s: Could not update2\n", __func__);

drivers/crypto/bcm/util.c

262

pr_err("%s: Could not generate %s hash\n", __func__, name);

drivers/crypto/caam/caamalg.c

3691

pr_err("Job Ring Device allocation for transform failed\n");

drivers/crypto/caam/caamalg.c

3742

pr_err("Failed to allocate %s fallback: %ld\n",

drivers/crypto/caam/caamalg_qi.c

2473

pr_err("Job Ring Device allocation for transform failed\n");

drivers/crypto/caam/caamalg_qi.c

2521

pr_err("Failed to allocate %s fallback: %ld\n",

drivers/crypto/caam/caamhash.c

1791

pr_err("Job Ring Device allocation for transform failed\n");

drivers/crypto/caam/caampkc.c

1120

pr_err("Job Ring Device allocation for transform failed\n");

drivers/crypto/caam/caamprng.c

154

pr_err("Seed length should be zero\n");

drivers/crypto/caam/caamprng.c

161

pr_err("Job Ring Device allocation failed\n");

drivers/crypto/caam/caamprng.c

98

pr_err("Job Ring Device allocation failed\n");

drivers/crypto/caam/caamrng.c

247

pr_err("Job Ring Device allocation for transform failed\n");

drivers/crypto/caam/error.c

32

pr_err("caam_dump_sg: kmap failed\n");

drivers/crypto/cavium/nitrox/nitrox_reqmgr.c

523

pr_err("comp not done\n");

drivers/crypto/cavium/nitrox/nitrox_skcipher.c

179

pr_err("unsupported cipher: %s\n", name);

drivers/crypto/ccp/ccp-crypto-aes-cmac.c

393

pr_err("%s ahash algorithm registration error (%d)\n",

drivers/crypto/ccp/ccp-crypto-aes-galois.c

233

pr_err("%s aead algorithm registration error (%d)\n",

drivers/crypto/ccp/ccp-crypto-aes-xts.c

266

pr_err("%s skcipher algorithm registration error (%d)\n",

drivers/crypto/ccp/ccp-crypto-aes.c

316

pr_err("%s skcipher algorithm registration error (%d)\n",

drivers/crypto/ccp/ccp-crypto-des3.c

204

pr_err("%s skcipher algorithm registration error (%d)\n",

drivers/crypto/ccp/ccp-crypto-main.c

405

pr_err("Cannot load: there are no available CCPs\n");

drivers/crypto/ccp/ccp-crypto-rsa.c

265

pr_err("%s akcipher algorithm registration error (%d)\n",

drivers/crypto/ccp/ccp-crypto-sha.c

445

pr_err("%s ahash algorithm registration error (%d)\n",

drivers/crypto/ccp/ccp-crypto-sha.c

503

pr_err("%s ahash algorithm registration error (%d)\n",

drivers/crypto/ccp/sev-dev-tio.c

159

pr_err("! ERROR: expected %d, found %d\n", check_dobjid, hdr->id);

drivers/crypto/ccp/sev-dev-tsm.c

381

pr_err("Failed to enable SEV-TIO: ret=%d en=%d initdone=%d SEV=%d\n",

drivers/crypto/chelsio/chcr_algo.c

1185

pr_err("%s : Failed to form WR. No memory\n", __func__);

drivers/crypto/chelsio/chcr_algo.c

1240

pr_err("AES: Invalid value of Key Len %d nbytes %d IV Len %d\n",

drivers/crypto/chelsio/chcr_algo.c

1421

pr_err("chcr device assignment fails\n");

drivers/crypto/chelsio/chcr_algo.c

1446

pr_err("failed to allocate fallback for %s\n", alg->base.cra_name);

drivers/crypto/chelsio/chcr_algo.c

1468

pr_err("failed to allocate fallback for %s\n", alg->base.cra_name);

drivers/crypto/chelsio/chcr_algo.c

1515

pr_err("ERROR, unsupported digest size\n");

drivers/crypto/chelsio/chcr_algo.c

2935

pr_err("CCM: IV check fails\n");

drivers/crypto/chelsio/chcr_algo.c

2940

pr_err("RFC4309: Invalid AAD length %d\n",

drivers/crypto/chelsio/chcr_algo.c

3431

pr_err("GCM: Invalid key length %d\n", keylen);

drivers/crypto/chelsio/chcr_algo.c

3485

pr_err("Unsupported digest size\n");

drivers/crypto/chelsio/chcr_algo.c

3504

pr_err("Unsupported cipher key\n");

drivers/crypto/chelsio/chcr_algo.c

3581

pr_err("Unsupported cipher key %d\n", keys.enckeylen);

drivers/crypto/chelsio/chcr_algo.c

3617

pr_err("%s : No crypto device.\n", __func__);

drivers/crypto/chelsio/chcr_algo.c

3637

pr_err("RFC4106: Invalid value of assoclen %d\n",

drivers/crypto/chelsio/chcr_algo.c

4369

pr_err("%s : Algorithm registration failed\n", name);

drivers/crypto/chelsio/chcr_core.c

168

pr_err("Incorrect request address from the firmware\n");

drivers/crypto/chelsio/chcr_core.c

212

pr_err("Unsupported opcode %d received\n", rpl->opcode);

drivers/crypto/hifn_795x.c

1473

pr_err("%s: dlen: %u, nbytes: %u, slen: %u, offset: %u.\n",

drivers/crypto/hifn_795x.c

1475

pr_err("%s: please contact author to fix this "

drivers/crypto/hifn_795x.c

2517

pr_err("hifn795x: invalid hifn_pll_ref clock, must be pci or ext");

drivers/crypto/hifn_795x.c

2529

pr_err("hifn795x: invalid hifn_pll_ref frequency, must"

drivers/crypto/hifn_795x.c

2537

pr_err("Failed to register PCI driver for %s device.\n",

drivers/crypto/hisilicon/hpre/hpre_crypto.c

1136

pr_err("Can not alloc_akcipher!\n");

drivers/crypto/hisilicon/hpre/hpre_crypto.c

1642

pr_err("Failed to alloc %s tfm!\n", alg);

drivers/crypto/hisilicon/hpre/hpre_crypto.c

375

pr_err("Failed to get request, and qp_id is %u\n", qp->qp_id);

drivers/crypto/hisilicon/hpre/hpre_crypto.c

692

pr_err("Failed to alloc dh tfm!\n");

drivers/crypto/hisilicon/hpre/hpre_main.c

1721

pr_err("hpre: can't register hisi hpre driver.\n");

drivers/crypto/hisilicon/sec2/sec_crypto.c

1344

pr_err("hisi_sec2: aead aes key error!\n");

drivers/crypto/hisilicon/sec2/sec_crypto.c

1364

pr_err("hisi_sec2: aead auth digest error!\n");

drivers/crypto/hisilicon/sec2/sec_crypto.c

2096

pr_err("get error aead iv size!\n");

drivers/crypto/hisilicon/sec2/sec_crypto.c

2147

pr_err("hisi_sec2: aead init error!\n");

drivers/crypto/hisilicon/sec2/sec_crypto.c

774

pr_err("failed to alloc fallback tfm for %s!\n", alg);

drivers/crypto/hisilicon/sec2/sec_crypto.c

790

pr_err("get error skcipher iv size!\n");

drivers/crypto/hisilicon/sec2/sec_crypto.c

866

pr_err("hisi_sec2: xts mode key error!\n");

drivers/crypto/hisilicon/sec2/sec_crypto.c

872

pr_err("hisi_sec2: sm4 key error!\n");

drivers/crypto/hisilicon/sec2/sec_crypto.c

886

pr_err("hisi_sec2: aes key error!\n");

drivers/crypto/hisilicon/sec2/sec_main.c

1437

pr_err("Failed to register driver to crypto.\n");

drivers/crypto/hisilicon/sec2/sec_main.c

1544

pr_err("Failed to register pci driver.\n");

drivers/crypto/hisilicon/sec2/sec_main.c

385

pr_err("ctx queue num[%u] is invalid!\n", ctx_q_num);

drivers/crypto/hisilicon/trng/trng.c

112

pr_err("slen(%u) is not matched with trng(%d)\n", slen,

drivers/crypto/hisilicon/trng/trng.c

155

pr_err("failed to generate random number(%d)!\n", ret);

drivers/crypto/hisilicon/trng/trng.c

187

pr_err("output is error, dlen %u!\n", dlen);

drivers/crypto/hisilicon/trng/trng.c

95

pr_err("failed to init trng(%d)\n", ret);

drivers/crypto/hisilicon/zip/zip_crypto.c

130

pr_err("failed to do fallback work, ret=%d\n", ret);

drivers/crypto/hisilicon/zip/zip_crypto.c

432

pr_err("failed to create zip qps (%d)!\n", ret);

drivers/crypto/hisilicon/zip/zip_crypto.c

567

pr_err("failed to init ctx (%d)!\n", ret);

drivers/crypto/hisilicon/zip/zip_main.c

1648

pr_err("Failed to register pci driver.\n");

drivers/crypto/img-hash.c

690

pr_err("img_hash: Could not load fallback driver.\n");

drivers/crypto/intel/iaa/iaa_crypto_main.c

1691

pr_err("deflate algorithm acomp fixed registration failed (%d)\n", ret);

drivers/crypto/intel/iaa/iaa_crypto_main.c

1813

pr_err("%s: no iaa_wq available to remove\n", __func__);

drivers/crypto/intel/iaa/iaa_crypto_main.c

1867

pr_err("IAA couldn't find any nodes with cpus\n");

drivers/crypto/intel/ixp4xx/ixp4xx_crypto.c

641

pr_err("ERROR: Cannot allocate fallback for %s %ld\n",

drivers/crypto/intel/keembay/keembay-ocs-ecc.c

783

pr_err("Failed to find the device : %ld\n",

drivers/crypto/intel/qat/qat_420xx/adf_drv.c

182

pr_err("QAT: Driver removal failed\n");

drivers/crypto/intel/qat/qat_4xxx/adf_drv.c

184

pr_err("QAT: Driver removal failed\n");

drivers/crypto/intel/qat/qat_c3xxx/adf_drv.c

203

pr_err("QAT: Driver removal failed\n");

drivers/crypto/intel/qat/qat_c3xxx/adf_drv.c

240

pr_err("QAT: Driver initialization failed\n");

drivers/crypto/intel/qat/qat_c3xxxvf/adf_drv.c

195

pr_err("QAT: Driver removal failed\n");

drivers/crypto/intel/qat/qat_c3xxxvf/adf_drv.c

210

pr_err("QAT: Driver initialization failed\n");

drivers/crypto/intel/qat/qat_c62x/adf_drv.c

203

pr_err("QAT: Driver removal failed\n");

drivers/crypto/intel/qat/qat_c62x/adf_drv.c

240

pr_err("QAT: Driver initialization failed\n");

drivers/crypto/intel/qat/qat_c62xvf/adf_drv.c

195

pr_err("QAT: Driver removal failed\n");

drivers/crypto/intel/qat/qat_c62xvf/adf_drv.c

210

pr_err("QAT: Driver initialization failed\n");

drivers/crypto/intel/qat/qat_common/adf_aer.c

197

pr_err("QAT: Can't find acceleration device\n");

drivers/crypto/intel/qat/qat_common/adf_bank_state.c

136

pr_err("Bank %u restored with exception: %#x\n", bank, tmp_val);

drivers/crypto/intel/qat/qat_common/adf_bank_state.c

26

pr_err("Fail to restore %s register. Expected %#x, actual %#x\n",

drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c

263

pr_err("QAT: Device %d not found\n", ctl_data->device_id);

drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c

338

pr_err("QAT: failed to copy from user.\n");

drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c

60

pr_err("QAT: unable to allocate chrdev region\n");

drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c

71

pr_err("QAT: cdev add failed\n");

drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c

79

pr_err("QAT: failed to create device\n");

drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c

98

pr_err("QAT: failed to copy from user cfg_data.\n");

drivers/crypto/intel/qat/qat_common/adf_gen4_vf_mig.c

182

pr_err("QAT: DST VF rate limiting mismatch.\n");

drivers/crypto/intel/qat/qat_common/adf_gen4_vf_mig.c

189

pr_err("QAT: SRC VF rate limiting mismatch - SRC srv %d and rp_mask 0x%llx.\n",

drivers/crypto/intel/qat/qat_common/adf_init.c

47

pr_err("QAT: Could not remove active service\n");

drivers/crypto/intel/qat/qat_common/adf_mstate_mgr.c

100

pr_err("QAT: LM - Not enough space for preamble\n");

drivers/crypto/intel/qat/qat_common/adf_pfvf_pf_proto.c

106

pr_err("QAT: Invalid size %d provided for message type %d\n",

drivers/crypto/intel/qat/qat_common/adf_pfvf_pf_proto.c

113

pr_err("QAT: Out-of-bound byte number %d (msg size %d)\n",

drivers/crypto/intel/qat/qat_common/adf_pfvf_pf_proto.c

92

pr_err("QAT: No registered provider for message %d\n", type);

drivers/crypto/intel/qat/qat_common/adf_pfvf_pf_proto.c

98

pr_err("QAT: unknown error from provider for message %d\n", type);

drivers/crypto/intel/qat/qat_common/qat_hal.c

1009

pr_err("QAT: invalid instruction num %d\n", inst_num);

drivers/crypto/intel/qat/qat_common/qat_hal.c

104

pr_err("QAT: Write CSR Timeout\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

1130

pr_err("QAT: bad regaddr=0x%x\n", reg_addr);

drivers/crypto/intel/qat/qat_common/qat_hal.c

1195

pr_err("QAT: bad destAddr=0x%x\n", dest_addr);

drivers/crypto/intel/qat/qat_common/qat_hal.c

1346

pr_err("QAT: bad 4-ctx mode,ctx=0x%x\n", ctx);

drivers/crypto/intel/qat/qat_common/qat_hal.c

1396

pr_err("QAT: 4-ctx mode,ctx=0x%x\n", ctx);

drivers/crypto/intel/qat/qat_common/qat_hal.c

1407

pr_err("QAT: bad xfrAddr=0x%x\n", xfr_addr);

drivers/crypto/intel/qat/qat_common/qat_hal.c

1412

pr_err("QAT: failed to read register");

drivers/crypto/intel/qat/qat_common/qat_hal.c

147

pr_err("QAT: wait_num_cycles time out\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

1497

pr_err("QAT: write gpr fail\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

1532

pr_err("QAT: write wr xfer fail\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

1567

pr_err("QAT: write rd xfer fail\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

1595

pr_err("QAT: write neigh error\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

162

pr_err("QAT: bad ctx mode=%d\n", mode);

drivers/crypto/intel/qat/qat_common/qat_hal.c

224

pr_err("QAT: lmType = 0x%x\n", lm_type);

drivers/crypto/intel/qat/qat_common/qat_hal.c

395

pr_err("QAT: AE%d is inactive!!\n", ae);

drivers/crypto/intel/qat/qat_common/qat_hal.c

466

pr_err("QAT: Fail to init eSram!\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

525

pr_err("QAT: failed to get device out of reset\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

661

pr_err("QAT: clear GPR of AE %d failed", ae);

drivers/crypto/intel/qat/qat_common/qat_hal.c

88

pr_err("QAT: Read CSR timeout\n");

drivers/crypto/intel/qat/qat_common/qat_hal.c

913

pr_err("QAT: start error (FCU_STS = 0x%x)\n", fcu_sts);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1004

pr_err("UOF doesn't have effective images\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1013

pr_err("Bad object\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1076

pr_err("incorrect SUOF checksum\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

110

pr_err("invalid header 0x%x\n", suof_hdr->file_id);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1138

pr_err("incompatible product type %x\n", img_ae_mode->dev_type);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

114

pr_err("unsupported firmware type\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1144

pr_err("incompatible device majver 0x%x\n", maj_ver);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

118

pr_err("SUOF chunk amount is incorrect\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1187

pr_err("input parameter SUOF pointer/size is NULL\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

122

pr_err("bad SUOF version, major 0x%x, minor 0x%x\n", maj, min);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1260

pr_err("authentication error (FCU_STATUS = 0x%x),retry = %d\n",

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1296

pr_err("Chip 0x%x doesn't support broadcast load\n", handle->pci_dev->device);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1302

pr_err("Broadcast load failed. AE is not enabled or active.\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1322

pr_err("Broadcast load failed: 0x%x)\n", fcu_sts);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1334

pr_err("broadcast load failed timeout %d\n", retry);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1433

pr_err("Unsupported firmware type\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1439

pr_err("Invalid %s firmware image\n", fw_type_name);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1502

pr_err("insufficient memory size for authentication data\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1603

pr_err("auth chunk memory size is not enough to store data\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1689

pr_err("AE %d is active\n", i);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1709

pr_err("firmware load failed timeout %x\n", retry);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1727

pr_err("map SUOF failed\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1751

pr_err("MMP size is too large: 0x%x\n", mem_size);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1777

pr_err("object file chunk is null\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1812

pr_err("incorrect MOF checksum\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1848

pr_err("object %s is not found inside MOF\n", obj_name);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1865

pr_err("unsupported chunk id\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1926

pr_err("inconsistent UOF/SUOF chunk amount\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1967

pr_err("invalid header 0x%x\n", mof_hdr->file_id);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1972

pr_err("MOF chunk amount is incorrect\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

1976

pr_err("bad MOF version, major 0x%x, minor 0x%x\n", maj, min);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

221

pr_err("initmem is out of range");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

225

pr_err("Memory scope for init_mem error\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

230

pr_err("AE name assigned in UOF init table is NULL\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

234

pr_err("Parse num for AE number failed\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

238

pr_err("ae %d out of range\n", *ae);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

354

pr_err("initmem region error. region type=0x%x\n", init_mem->region);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

428

pr_err("fail to batch init lmem for AE %d\n", ae);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

536

pr_err("UOF can't contain imported variable to be parsed\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

543

pr_err("UOF can't contain neighbor register table\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

547

pr_err("UOF can't contain multiple pages\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

551

pr_err("UOF can't use shared control store feature\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

555

pr_err("UOF can't use reloadable feature\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

67

pr_err("bad argument, ae_data is NULL\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

673

pr_err("uimage uses AE not set\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

735

pr_err("unsupported device 0x%x\n", handle->pci_dev->device);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

745

pr_err("UOF type 0x%x doesn't match with platform 0x%x\n",

drivers/crypto/intel/qat/qat_common/qat_uclo.c

753

pr_err("UOF majVer 0x%x out of range\n", maj_ver);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

796

pr_err("UOF uses not supported reg type 0x%x\n", reg_type);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

832

pr_err("invalid ctx num = 0x%x\n", init_regsym->ctx);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

844

pr_err("INIT_EXPR feature not supported\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

847

pr_err("INIT_EXPR_ENDIAN_SWAP feature not supported\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

867

pr_err("initialize memory failed\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

896

pr_err("qat_hal_set_ae_ctx_mode error\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

903

pr_err("qat_hal_set_ae_nn_mode error\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

910

pr_err("qat_hal_set_ae_lm_mode LMEM0 error\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

916

pr_err("qat_hal_set_ae_lm_mode LMEM1 error\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

923

pr_err("qat_hal_set_ae_lm_mode LMEM2 error\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

929

pr_err("qat_hal_set_ae_lm_mode LMEM3 error\n");

drivers/crypto/intel/qat/qat_common/qat_uclo.c

94

pr_err("Invalid header 0x%x\n", hdr->file_id);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

98

pr_err("bad UOF version, major 0x%x, minor 0x%x\n", maj, min);

drivers/crypto/intel/qat/qat_common/qat_uclo.c

993

pr_err("UOF incompatible\n");

drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c

203

pr_err("QAT: Driver removal failed\n");

drivers/crypto/intel/qat/qat_dh895xcc/adf_drv.c

240

pr_err("QAT: Driver initialization failed\n");

drivers/crypto/intel/qat/qat_dh895xccvf/adf_drv.c

195

pr_err("QAT: Driver removal failed\n");

drivers/crypto/intel/qat/qat_dh895xccvf/adf_drv.c

210

pr_err("QAT: Driver initialization failed\n");

drivers/crypto/marvell/octeontx/otx_cptvf_algs.c

91

pr_err("Unknown PF type %d\n", se_devices.desc[0].pf_type);

drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c

526

pr_err("%s() failed to allocate fallback for %s\n",

drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c

584

pr_err("%s() failed to allocate fallback for %s\n",

drivers/crypto/nx/nx-842.c

152

pr_err("Internal error: no space for header\n");

drivers/crypto/nx/nx-842.c

317

pr_err("Internal error: No header but multiple groups\n");

drivers/crypto/nx/nx-842.c

482

pr_err("header has no groups\n");

drivers/crypto/nx/nx-842.c

487

pr_err("header has too many groups %x, max %x\n",

drivers/crypto/nx/nx-common-powernv.c

176

pr_err("ERROR: " msg " : %02x %02x %02x %02x %08x\n", \

drivers/crypto/nx/nx-common-powernv.c

699

pr_err("ibm,nx-842: Can not open TX window: %ld\n",

drivers/crypto/nx/nx-common-powernv.c

743

pr_err("NX engine is not available for CPU %d\n", i);

drivers/crypto/nx/nx-common-powernv.c

759

pr_err("Invalid RxFIFO priority value\n");

drivers/crypto/nx/nx-common-powernv.c

779

pr_err("Missing rx-fifo-address property\n");

drivers/crypto/nx/nx-common-powernv.c

785

pr_err("Missing rx-fifo-size property\n");

drivers/crypto/nx/nx-common-powernv.c

791

pr_err("Missing lpid property\n");

drivers/crypto/nx/nx-common-powernv.c

797

pr_err("Missing pid property\n");

drivers/crypto/nx/nx-common-powernv.c

803

pr_err("Missing tid property\n");

drivers/crypto/nx/nx-common-powernv.c

809

pr_err("Missing priority property\n");

drivers/crypto/nx/nx-common-powernv.c

846

pr_err("setting RxFIFO with VAS failed: %d\n",

drivers/crypto/nx/nx-common-powernv.c

883

pr_err("Failed to initialize NX for chip(%d): %d\n",

drivers/crypto/nx/nx-common-powernv.c

914

pr_err("ibm,chip-id missing\n");

drivers/crypto/nx/nx-common-powernv.c

920

pr_err("Unable to map chip_id %d to vasid\n", chip_id);

drivers/crypto/nx/nx-common-powernv.c

937

pr_err("NX FIFO nodes are missing\n");

drivers/crypto/nx/nx-common-powernv.c

957

pr_err("ibm,chip-id missing\n");

drivers/crypto/nx/nx-common-powernv.c

962

pr_err("ibm,842-coprocessor-type missing\n");

drivers/crypto/nx/nx-common-powernv.c

967

pr_err("ibm,842-coprocessor-instance missing\n");

drivers/crypto/nx/nx-common-powernv.c

984

pr_err("NX842 chip %d, CT %d != first found CT %d\n",

drivers/crypto/nx/nx-common-pseries.c

1232

pr_err("Could not register VIO driver %d\n", ret);

drivers/crypto/nx/nx-common-pseries.c

1242

pr_err("NX-GZIP is not supported. Returned=%d\n", ret);

drivers/crypto/nx/nx-common-pseries.c

761

pr_err("%s: device is not available\n", __func__);

drivers/crypto/nx/nx.c

633

pr_err("Attempt to initialize NX crypto context while device "

drivers/crypto/omap-crypto.c

67

pr_err("%s: Couldn't allocate pages for unaligned cases.\n",

drivers/crypto/omap-des.c

172

pr_err("omap_des_read(" #offset "=%#x)= %#x\n", \

drivers/crypto/omap-des.c

186

pr_err("omap_des_write(" #offset "=%#x) value=%#x\n", \

drivers/crypto/omap-sham.c

1330

pr_err("omap-sham: fallback driver '%s' "

drivers/crypto/omap-sham.c

1344

pr_err("omap-sham: base driver '%s' "

drivers/crypto/omap-sham.c

543

pr_err("sg miter failure.\n");

drivers/crypto/omap-sham.c

593

pr_err("omap-sham: can't configure dmaengine slave: %d\n", ret);

drivers/crypto/omap-sham.c

704

pr_err("Couldn't allocate pages for unaligned cases.\n");

drivers/crypto/qce/aead.c

84

pr_err("Bad message error\n");

drivers/crypto/s5p-sss.c

1637

pr_err("fallback alloc fails for '%s'\n", alg_name);

drivers/crypto/sahara.c

716

pr_err("Error allocating fallback algo %s\n", name);

drivers/crypto/stm32/stm32-hash.c

1114

pr_err("Couldn't allocate pages for unaligned cases.\n");

drivers/crypto/stm32/stm32-hash.c

1325

pr_err("Buffer contains more than one block.\n");

drivers/crypto/virtio/virtio_crypto_akcipher_algs.c

141

pr_err("virtio_crypto: Create session failed status: %u\n",

drivers/crypto/virtio/virtio_crypto_akcipher_algs.c

196

pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n",

drivers/crypto/virtio/virtio_crypto_akcipher_algs.c

377

pr_err("virtio_crypto: Could not find a virtio device in the system or unsupported algo\n");

drivers/crypto/virtio/virtio_crypto_mgr.c

205

pr_err("virtio_crypto: Failed to register crypto skcipher algs\n");

drivers/crypto/virtio/virtio_crypto_mgr.c

210

pr_err("virtio_crypto: Failed to register crypto akcipher algs\n");

drivers/crypto/virtio/virtio_crypto_skcipher_algs.c

172

pr_err("virtio_crypto: Create session failed status: %u\n",

drivers/crypto/virtio/virtio_crypto_skcipher_algs.c

234

pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n",

drivers/crypto/virtio/virtio_crypto_skcipher_algs.c

256

pr_err("virtio_crypto: the key is too long\n");

drivers/crypto/virtio/virtio_crypto_skcipher_algs.c

298

pr_err("virtio_crypto: Could not find a virtio device in the system or unsupported algo\n");

drivers/crypto/virtio/virtio_crypto_skcipher_algs.c

343

pr_err("Invalid number of src SG.\n");

drivers/crypto/virtio/virtio_crypto_skcipher_algs.c

387

pr_err("virtio_crypto: The dst_len is beyond U32_MAX\n");

drivers/crypto/virtio/virtio_crypto_skcipher_algs.c

398

pr_err("virtio_crypto: The length is too big\n");

drivers/crypto/xilinx/xilinx-trng.c

325

pr_err("Fail to register the TRNG\n");

drivers/devfreq/devfreq-event.c

470

pr_err("%s: couldn't create class\n", __FILE__);

drivers/devfreq/devfreq.c

1273

pr_err("%s: Invalid parameters.\n", __func__);

drivers/devfreq/devfreq.c

1280

pr_err("%s: governor %s already registered\n", __func__,

drivers/devfreq/devfreq.c

1364

pr_err("%s: Invalid parameters.\n", __func__);

drivers/devfreq/devfreq.c

1371

pr_err("%s: governor %s not registered\n", __func__,

drivers/devfreq/devfreq.c

2024

pr_err("%s: couldn't create class\n", __FILE__);

drivers/devfreq/devfreq.c

2031

pr_err("%s: couldn't create workqueue\n", __FILE__);

drivers/devfreq/devfreq.c

266

pr_err("DEVFREQ: %s: Invalid parameters\n", __func__);

drivers/devfreq/devfreq.c

297

pr_err("DEVFREQ: %s: Invalid parameters\n", __func__);

drivers/devfreq/devfreq.c

74

pr_err("DEVFREQ: %s: Invalid parameters\n", __func__);

drivers/devfreq/governor_passive.c

468

pr_err("%s: failed remove governor %d\n", __func__, ret);

drivers/devfreq/governor_performance.c

56

pr_err("%s: failed remove governor %d\n", __func__, ret);

drivers/devfreq/governor_powersave.c

56

pr_err("%s: failed remove governor %d\n", __func__, ret);

drivers/devfreq/governor_simpleondemand.c

138

pr_err("%s: failed remove governor %d\n", __func__, ret);

drivers/devfreq/governor_userspace.c

154

pr_err("%s: failed remove governor %d\n", __func__, ret);

drivers/dibs/dibs_main.c

262

pr_err("%s fails with %d\n", __func__, rc);

drivers/dio/dio.c

188

pr_err("DIO: Error registering dio_bus\n");

drivers/dio/dio.c

260

pr_err("DIO: Error registering device %s\n",

drivers/dma-buf/dma-heap.c

238

pr_err("dma_heap: Cannot add heap without a name\n");

drivers/dma-buf/dma-heap.c

243

pr_err("dma_heap: Cannot add heap with invalid ops struct\n");

drivers/dma-buf/dma-heap.c

259

pr_err("dma_heap: Unable to get minor number for heap\n");

drivers/dma-buf/dma-heap.c

270

pr_err("dma_heap: Unable to add char device\n");

drivers/dma-buf/dma-heap.c

281

pr_err("dma_heap: Unable to create device\n");

drivers/dma-buf/dma-heap.c

291

pr_err("dma_heap: Already registered heap named %s\n",

drivers/dma-buf/dma-heap.c

90

pr_err("dma_heap: minor %d unknown.\n", iminor(inode));

drivers/dma-buf/selftest.c

107

pr_err("dma-buf/%s: %s failed with error %d\n",

drivers/dma-buf/st-dma-fence-chain.c

194

pr_err("Reported %d for find_seqno(0)!\n", err);

drivers/dma-buf/st-dma-fence-chain.c

203

pr_err("Reported %d for find_seqno(%d:%d)!\n",

drivers/dma-buf/st-dma-fence-chain.c

208

pr_err("Incorrect fence reported by find_seqno(%d:%d)\n",

drivers/dma-buf/st-dma-fence-chain.c

218

pr_err("Error reported for finding self\n");

drivers/dma-buf/st-dma-fence-chain.c

222

pr_err("Incorrect fence reported by find self\n");

drivers/dma-buf/st-dma-fence-chain.c

231

pr_err("Error not reported for future fence: find_seqno(%d:%d)!\n",

drivers/dma-buf/st-dma-fence-chain.c

241

pr_err("Error reported for previous fence!\n");

drivers/dma-buf/st-dma-fence-chain.c

245

pr_err("Incorrect fence reported by find_seqno(%d:%d)\n",

drivers/dma-buf/st-dma-fence-chain.c

273

pr_err("Reported %d for find_seqno()!\n", err);

drivers/dma-buf/st-dma-fence-chain.c

278

pr_err("Incorrect chain-fence.seqno:%lld reported for completed seqno:1\n",

drivers/dma-buf/st-dma-fence-chain.c

285

pr_err("Reported %d for finding self!\n", err);

drivers/dma-buf/st-dma-fence-chain.c

311

pr_err("Reported %d for find_seqno()!\n", err);

drivers/dma-buf/st-dma-fence-chain.c

323

pr_err("Incorrect chain-fence.seqno:%lld reported for completed seqno:2\n",

drivers/dma-buf/st-dma-fence-chain.c

355

pr_err("Reported %d for find_seqno(%d:%d)!\n",

drivers/dma-buf/st-dma-fence-chain.c

360

pr_err("Incorrect fence.seqno:%lld reported by find_seqno(%d:%d)\n",

drivers/dma-buf/st-dma-fence-chain.c

372

pr_err("Error reported for finding self\n");

drivers/dma-buf/st-dma-fence-chain.c

376

pr_err("Incorrect fence reported by find self\n");

drivers/dma-buf/st-dma-fence-chain.c

405

pr_err("Failed to find fence seqno:%d\n",

drivers/dma-buf/st-dma-fence-chain.c

420

pr_err("Reported an invalid fence for find-self:%d\n",

drivers/dma-buf/st-dma-fence-chain.c

508

pr_err("chain[%d] not signaled!\n", i);

drivers/dma-buf/st-dma-fence-chain.c

515

pr_err("chain[%d] is signaled!\n", i);

drivers/dma-buf/st-dma-fence-chain.c

540

pr_err("chain[%d] is signaled!\n", i);

drivers/dma-buf/st-dma-fence-chain.c

548

pr_err("chain[%d] was not signaled!\n", i);

drivers/dma-buf/st-dma-fence-unwrap.c

153

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

159

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

197

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

203

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

245

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

251

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

293

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

299

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

334

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

340

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

396

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

402

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

458

pr_err("Unexpected order!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

462

pr_err("Unexpected order!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

464

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

470

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

523

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

529

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

600

pr_err("Unexpected fence!\n");

drivers/dma-buf/st-dma-fence-unwrap.c

606

pr_err("Not all fences seen!\n");

drivers/dma-buf/st-dma-fence.c

130

pr_err("Failed to add callback, fence already signaled!\n");

drivers/dma-buf/st-dma-fence.c

136

pr_err("Callback failed!\n");

drivers/dma-buf/st-dma-fence.c

161

pr_err("Added callback, but fence was already signaled!\n");

drivers/dma-buf/st-dma-fence.c

167

pr_err("Callback called after failed attachment !\n");

drivers/dma-buf/st-dma-fence.c

188

pr_err("Failed to add callback, fence already signaled!\n");

drivers/dma-buf/st-dma-fence.c

193

pr_err("Failed to remove callback!\n");

drivers/dma-buf/st-dma-fence.c

199

pr_err("Callback still signaled after removal!\n");

drivers/dma-buf/st-dma-fence.c

220

pr_err("Failed to add callback, fence already signaled!\n");

drivers/dma-buf/st-dma-fence.c

226

pr_err("Callback failed!\n");

drivers/dma-buf/st-dma-fence.c

231

pr_err("Callback removal succeed after being executed!\n");

drivers/dma-buf/st-dma-fence.c

253

pr_err("Fence unexpectedly has signaled status on creation\n");

drivers/dma-buf/st-dma-fence.c

259

pr_err("Fence not reporting signaled status\n");

drivers/dma-buf/st-dma-fence.c

283

pr_err("Fence unexpectedly has error status before signal\n");

drivers/dma-buf/st-dma-fence.c

289

pr_err("Fence not reporting error status, got %d\n",

drivers/dma-buf/st-dma-fence.c

312

pr_err("Wait reported complete before being signaled\n");

drivers/dma-buf/st-dma-fence.c

319

pr_err("Wait reported incomplete after being signaled\n");

drivers/dma-buf/st-dma-fence.c

356

pr_err("Wait reported complete before being signaled\n");

drivers/dma-buf/st-dma-fence.c

367

pr_err("Wait reported incomplete after timeout\n");

drivers/dma-buf/st-dma-fence.c

390

pr_err("Obtained unsignaled stub fence!\n");

drivers/dma-buf/st-dma-fence.c

464

pr_err("Callback not seen on thread %d, pass %lu (%lu misses), signaling %s add_callback; fence signaled? %s\n",

drivers/dma-buf/st-dma-fence.c

84

pr_err("Fence unexpectedly signaled on creation\n");

drivers/dma-buf/st-dma-fence.c

89

pr_err("Fence reported being already signaled\n");

drivers/dma-buf/st-dma-fence.c

94

pr_err("Fence not reporting signaled\n");

drivers/dma-buf/st-dma-fence.c

99

pr_err("Fence reported not being already signaled\n");

drivers/dma-buf/st-dma-resv.c

126

pr_err("Resv locking failed\n");

drivers/dma-buf/st-dma-resv.c

132

pr_err("Resv shared slot allocation failed\n");

drivers/dma-buf/st-dma-resv.c

141

pr_err("More than one fence found\n");

drivers/dma-buf/st-dma-resv.c

146

pr_err("Unexpected fence\n");

drivers/dma-buf/st-dma-resv.c

151

pr_err("Unexpected fence usage\n");

drivers/dma-buf/st-dma-resv.c

158

pr_err("No fence found\n");

drivers/dma-buf/st-dma-resv.c

187

pr_err("Resv locking failed\n");

drivers/dma-buf/st-dma-resv.c

193

pr_err("Resv shared slot allocation failed\n");

drivers/dma-buf/st-dma-resv.c

205

pr_err("More than one fence found\n");

drivers/dma-buf/st-dma-resv.c

210

pr_err("No restart flag\n");

drivers/dma-buf/st-dma-resv.c

214

pr_err("Unexpected fence\n");

drivers/dma-buf/st-dma-resv.c

219

pr_err("Unexpected fence usage\n");

drivers/dma-buf/st-dma-resv.c

234

pr_err("No fence found\n");

drivers/dma-buf/st-dma-resv.c

260

pr_err("Resv locking failed\n");

drivers/dma-buf/st-dma-resv.c

266

pr_err("Resv shared slot allocation failed\n");

drivers/dma-buf/st-dma-resv.c

276

pr_err("get_fences failed\n");

drivers/dma-buf/st-dma-resv.c

281

pr_err("get_fences returned unexpected fence\n");

drivers/dma-buf/st-dma-resv.c

56

pr_err("Resv locking failed\n");

drivers/dma-buf/st-dma-resv.c

79

pr_err("Resv locking failed\n");

drivers/dma-buf/st-dma-resv.c

85

pr_err("Resv shared slot allocation failed\n");

drivers/dma-buf/st-dma-resv.c

91

pr_err("Resv unexpectedly signaled\n");

drivers/dma-buf/st-dma-resv.c

97

pr_err("Resv not reporting signaled\n");

drivers/dma-buf/udmabuf.c

547

pr_err("Could not initialize udmabuf device\n");

drivers/dma-buf/udmabuf.c

554

pr_err("Could not setup DMA mask for udmabuf device\n");

drivers/dma/amba-pl08x.c

607

pr_err("pl08x: channel%u timeout waiting for pause\n", ch->id);

drivers/dma/dmaengine.c

1090

pr_err("%s: unable to alloc ida for chan: %d\n",

drivers/dma/dmaengine.c

1181

pr_err("DMAdevice must have dev\n");

drivers/dma/dmaengine.c

288

pr_err("dmaengine dma_channel_table_init failure: %d\n", err);

drivers/dma/dmatest.c

1212

pr_err("Channel misconfigured, can't continue\n");

drivers/dma/dmatest.c

653

pr_err("too many buffers (%d of 255 supported)\n",

drivers/dma/dmatest.c

660

pr_err("%u-byte buffer too small for %d-byte alignment\n",

drivers/dma/dmatest.c

708

pr_err("%u-byte transfer size must be lower than %u-buffer size\n",

drivers/dma/of-dma.c

126

pr_err("%s: not enough information provided\n", __func__);

drivers/dma/of-dma.c

193

pr_err("%s: not enough information provided\n", __func__);

drivers/dma/of-dma.c

262

pr_err("%s: not enough information provided\n", __func__);

drivers/dma/of-dma.c

272

pr_err("%s: dma-names property of node '%pOF' missing or empty\n",

drivers/dma/ppc4xx/adma.c

3934

pr_err("%s: can't find I2O device tree node\n",

drivers/dma/ppc4xx/adma.c

3941

pr_err("%s: failed to map I2O registers\n", __func__);

drivers/dma/ppc4xx/adma.c

4413

pr_err("%s: can't find I2O device tree node\n",

drivers/dma/ppc4xx/adma.c

4425

pr_err("%s: failed to map I2O registers\n", __func__);

drivers/dma/ppc4xx/adma.c

4434

pr_err("%pOF: can't get DCR registers base/len!\n", np);

drivers/dma/ppc4xx/adma.c

4442

pr_err("%pOF: failed to map DCRs!\n", np);

drivers/dma/ppc4xx/adma.c

4457

pr_err("%s: DMA FIFO buffer allocation failed.\n", __func__);

drivers/dma/ppc4xx/adma.c

4493

pr_err("%s: can't find MQ device tree node\n",

drivers/dma/ppc4xx/adma.c

4503

pr_err("%pOF: can't get DCR registers base/len!\n", np);

drivers/dma/ppc4xx/adma.c

4510

pr_err("%pOF: failed to map DCRs!\n", np);

drivers/dma/ppc4xx/adma.c

4568

pr_err("%s: failed to register platform driver\n",

drivers/dma/ppc4xx/adma.c

4598

pr_err("%s: failed to create RAID-6 driver interface\n",

drivers/dma/ppc4xx/adma.c

874

pr_err("%s: src_cnt=%d, state=%d, addr_count=%d, order=%lld\n",

drivers/dma/ppc4xx/adma.c

877

pr_err("\t[%d] 0x%llx\n", i, srcs[i]);

drivers/dma/ppc4xx/adma.c

974

pr_err("DMA%d err status: 0x%x\n",

drivers/dma/ppc4xx/adma.c

999

pr_err("XOR ERR 0x%x status\n", rv);

drivers/dma/ti/cppi41.c

344

pr_err("%s() q %d desc %08x\n", __func__,

drivers/dma/ti/k3-psil.c

46

pr_err("PSIL: No compatible machine found for map\n");

drivers/dma/ti/k3-psil.c

97

pr_err("PSIL: thread ID 0x%04x not defined in map\n",

drivers/dma/ti/k3-udma-private.c

30

pr_err("UDMA node is not found\n");

drivers/dma/xgene-dma.c

397

pr_err("Invalid dma descriptor index\n");

drivers/edac/a72_edac.c

207

pr_err("failed to register A72 EDAC device\n");

drivers/edac/altera_edac.c

472

pr_err("Suspend not allowed when EDAC is enabled.\n");

drivers/edac/fsl_ddr_edac.c

538

pr_err("%s: Unable to get resource for MC err regs\n",

drivers/edac/fsl_ddr_edac.c

545

pr_err("%s: Error while requesting mem region\n",

drivers/edac/fsl_ddr_edac.c

553

pr_err("%s: Unable to setup MC err regs\n", __func__);

drivers/edac/fsl_ddr_edac.c

631

pr_err("%s: Unable to request irq %d for FSL DDR DRAM ERR\n",

drivers/edac/layerscape_edac.c

57

pr_err("MC fails to register\n");

drivers/edac/mpc85xx_edac.c

100

pr_err("PCIe ERR_CAP_R1 register: 0x%08x\n",

drivers/edac/mpc85xx_edac.c

102

pr_err("PCIe ERR_CAP_R2 register: 0x%08x\n",

drivers/edac/mpc85xx_edac.c

104

pr_err("PCIe ERR_CAP_R3 register: 0x%08x\n",

drivers/edac/mpc85xx_edac.c

202

pr_err("%s: Unable to get resource for PCI err regs\n", __func__);

drivers/edac/mpc85xx_edac.c

211

pr_err("%s: Error while requesting mem region\n", __func__);

drivers/edac/mpc85xx_edac.c

218

pr_err("%s: Unable to setup PCI err regs\n", __func__);

drivers/edac/mpc85xx_edac.c

262

pr_err("%s: Unable to request irq %d for MPC85xx PCI err\n",

drivers/edac/mpc85xx_edac.c

449

pr_err("ECC Error in CPU L2 cache\n");

drivers/edac/mpc85xx_edac.c

450

pr_err("L2 Error Detect Register: 0x%08x\n", err_detect);

drivers/edac/mpc85xx_edac.c

451

pr_err("L2 Error Capture Data High Register: 0x%08x\n",

drivers/edac/mpc85xx_edac.c

453

pr_err("L2 Error Capture Data Lo Register: 0x%08x\n",

drivers/edac/mpc85xx_edac.c

455

pr_err("L2 Error Syndrome Register: 0x%08x\n",

drivers/edac/mpc85xx_edac.c

457

pr_err("L2 Error Attributes Capture Register: 0x%08x\n",

drivers/edac/mpc85xx_edac.c

459

pr_err("L2 Error Address Capture Register: 0x%08x\n",

drivers/edac/mpc85xx_edac.c

515

pr_err("%s: Unable to get resource for L2 err regs\n", __func__);

drivers/edac/mpc85xx_edac.c

524

pr_err("%s: Error while requesting mem region\n", __func__);

drivers/edac/mpc85xx_edac.c

531

pr_err("%s: Unable to setup L2 err regs\n", __func__);

drivers/edac/mpc85xx_edac.c

563

pr_err("%s: Unable to request irq %d for MPC85xx L2 err\n",

drivers/edac/mpc85xx_edac.c

63

pr_err("PCI error(s) detected\n");

drivers/edac/mpc85xx_edac.c

64

pr_err("PCI/X ERR_DR register: %#08x\n", err_detect);

drivers/edac/mpc85xx_edac.c

66

pr_err("PCI/X ERR_ATTRIB register: %#08x\n",

drivers/edac/mpc85xx_edac.c

68

pr_err("PCI/X ERR_ADDR register: %#08x\n",

drivers/edac/mpc85xx_edac.c

70

pr_err("PCI/X ERR_EXT_ADDR register: %#08x\n",

drivers/edac/mpc85xx_edac.c

72

pr_err("PCI/X ERR_DL register: %#08x\n",

drivers/edac/mpc85xx_edac.c

74

pr_err("PCI/X ERR_DH register: %#08x\n",

drivers/edac/mpc85xx_edac.c

95

pr_err("PCIe error(s) detected\n");

drivers/edac/mpc85xx_edac.c

96

pr_err("PCIe ERR_DR register: 0x%08x\n", err_detect);

drivers/edac/mpc85xx_edac.c

97

pr_err("PCIe ERR_CAP_STAT register: 0x%08x\n", err_cap_stat);

drivers/edac/mpc85xx_edac.c

98

pr_err("PCIe ERR_CAP_R0 register: 0x%08x\n",

drivers/edac/octeon_edac-l2c.c

174

pr_err("%s: edac_device_add_device() failed\n", __func__);

drivers/edac/octeon_edac-pc.c

108

pr_err("%s: edac_device_add_device() failed\n", __func__);

drivers/edac/octeon_edac-pci.c

78

pr_err("%s: edac_pci_add_device() failed\n", __func__);

drivers/edac/skx_common.c

767

pr_err("Invalid address 0x%llx in IA32_MC%d_ADDR\n", mce->addr, mce->bank);

drivers/firmware/arm_ffa/driver.c

1019

pr_err("Notification Info fetch failed: 0x%lx (0x%lx)",

drivers/firmware/arm_ffa/driver.c

1115

pr_err("invalid uuid (%s)\n", uuid_str);

drivers/firmware/arm_ffa/driver.c

1201

pr_err("%s: Invalid partition ID 0x%x\n", __func__, dev->vm_id);

drivers/firmware/arm_ffa/driver.c

1210

pr_err("%s: No such partition ID 0x%x\n", __func__, dev->vm_id);

drivers/firmware/arm_ffa/driver.c

1342

pr_err("Could not unregister notification callback\n");

drivers/firmware/arm_ffa/driver.c

1403

pr_err("Failed to register callback for %d - %d\n",

drivers/firmware/arm_ffa/driver.c

1519

pr_err("Failed to retrieve notifications with %d!\n", rc);

drivers/firmware/arm_ffa/driver.c

153

pr_err("Incompatible v%d.%d! Latest supported v%d.%d\n",

drivers/firmware/arm_ffa/driver.c

161

pr_err("Incompatible v%d.%d! Earliest supported v%d.%d\n",

drivers/firmware/arm_ffa/driver.c

1643

pr_err("%s: duplicate dev %p part ID 0x%x\n",

drivers/firmware/arm_ffa/driver.c

1667

pr_err("%s: failed to save part ID 0x%x Ret:%d\n",

drivers/firmware/arm_ffa/driver.c

1690

pr_err("%s: failed to register host partition ID 0x%x\n",

drivers/firmware/arm_ffa/driver.c

1741

pr_err("Failed to register FF-A bus notifiers\n");

drivers/firmware/arm_ffa/driver.c

1760

pr_err("%s: failed to register partition ID 0x%x\n",

drivers/firmware/arm_ffa/driver.c

1840

pr_err("Failed to retrieve FF-A %s %u\n", err_str, id);

drivers/firmware/arm_ffa/driver.c

1866

pr_err("Failed to create IRQ mapping!\n");

drivers/firmware/arm_ffa/driver.c

1941

pr_err("Error registering percpu SRI nIRQ %d : %d\n",

drivers/firmware/arm_ffa/driver.c

1953

pr_err("Error registering percpu NPI nIRQ %d : %d\n",

drivers/firmware/arm_ffa/driver.c

2000

pr_err("Notification bitmap create error %d\n", ret);

drivers/firmware/arm_ffa/driver.c

2051

pr_err("failed to obtain VM id for self\n");

drivers/firmware/arm_ffa/driver.c

2083

pr_err("failed to register FFA RxTx buffers\n");

drivers/firmware/arm_ffa/driver.c

2098

pr_err("failed to setup partitions\n");

drivers/firmware/arm_ffa/driver.c

228

pr_err("%s: Invalid Parameters: %x, %x", __func__,

drivers/firmware/arm_ffa/driver.c

745

pr_err("Memory Region Fragment > Tx Buffer size\n");

drivers/firmware/arm_ffa/driver.c

973

pr_err("%s: Invalid partition ID 0x%x\n", __func__, part_id);

drivers/firmware/arm_ffa/smccc.c

29

pr_err("%s: invalid SMCCC conduit\n", __func__);

drivers/firmware/arm_scmi/bus.c

118

pr_err("Failed to save SCMI device - ret:%d\n", ret);

drivers/firmware/arm_scmi/bus.c

495

pr_err("(%pOF) Failed to create device for protocol 0x%x (%s)\n",

drivers/firmware/arm_scmi/bus.c

589

pr_err("SCMI protocol bus register failed (%d)\n", retval);

drivers/firmware/arm_scmi/bus.c

80

pr_err("Ignoring duplicate request [%d] %s\n",

drivers/firmware/arm_scmi/driver.c

334

pr_err("missing vendor_id for protocol 0x%x\n", proto->id);

drivers/firmware/arm_scmi/driver.c

339

pr_err("malformed vendor_id for protocol 0x%x\n", proto->id);

drivers/firmware/arm_scmi/driver.c

345

pr_err("malformed sub_vendor_id for protocol 0x%x\n",

drivers/firmware/arm_scmi/driver.c

3452

pr_err("Could NOT create SCMI top dentry.\n");

drivers/firmware/arm_scmi/driver.c

359

pr_err("invalid protocol\n");

drivers/firmware/arm_scmi/driver.c

364

pr_err("missing init for protocol 0x%x\n", proto->id);

drivers/firmware/arm_scmi/driver.c

384

pr_err("unable to allocate SCMI protocol slot for 0x%x - err %d\n",

drivers/firmware/arm_scmi/notify.c

1338

pr_err("Failed to ENABLE events for key:%X !\n", hndl->key);

drivers/firmware/arm_scmi/quirks.c

270

pr_err("SCMI skip QUIRK [%s] - BAD RANGE - |%s|\n",

drivers/firmware/arm_sdei.c

363

pr_err("disabling SDEI firmware interface\n");

drivers/firmware/arm_sdei.c

375

pr_err("Failed to reset platform: %d\n", err);

drivers/firmware/arm_sdei.c

634

pr_err("Failed to re-register event %u\n",

drivers/firmware/arm_sdei.c

644

pr_err("Failed to re-enable event %u\n",

drivers/firmware/arm_sdei.c

669

pr_err("Failed to unregister event %u: %d\n",

drivers/firmware/arm_sdei.c

692

pr_err("Failed to re-register event %u: %d\n",

drivers/firmware/arm_sdei.c

700

pr_err("Failed to re-enable event %u: %d\n",

drivers/firmware/arm_sdei.c

969

pr_err("Failed to get SDEI version: %d\n", err);

drivers/firmware/broadcom/bcm47xx_nvram.c

104

pr_err("no nvram found\n");

drivers/firmware/broadcom/bcm47xx_nvram.c

121

pr_err("No valid NVRAM found\n");

drivers/firmware/broadcom/bcm47xx_nvram.c

171

pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",

drivers/firmware/broadcom/bcm47xx_nvram.c

55

pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");

drivers/firmware/broadcom/bcm47xx_nvram.c

59

pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",

drivers/firmware/broadcom/bcm47xx_sprom.c

503

pr_err("unable to fetch mac address\n");

drivers/firmware/dmi_scan.c

813

pr_err("dmi: Firmware registration failed.\n");

drivers/firmware/efi/apple-properties.c

132

pr_err("invalid len in dev_header at %#zx\n", offset);

drivers/firmware/efi/apple-properties.c

141

pr_err("device path parse error %ld at %#zx:\n",

drivers/firmware/efi/apple-properties.c

190

pr_err("cannot map setup_data header\n");

drivers/firmware/efi/apple-properties.c

205

pr_err("cannot map setup_data payload\n");

drivers/firmware/efi/apple-properties.c

211

pr_err("unsupported version:\n");

drivers/firmware/efi/apple-properties.c

216

pr_err("length mismatch, expected %u\n", data_len);

drivers/firmware/efi/arm-runtime.c

102

pr_err("Failed to remap EFI memory map\n");

drivers/firmware/efi/arm-runtime.c

143

pr_err("UEFI virtual mapping missing or invalid -- runtime services will not be available\n");

drivers/firmware/efi/capsule-loader.c

130

pr_err("capsule update failed\n");

drivers/firmware/efi/capsule-loader.c

226

pr_err("capsule upload size exceeded header defined size\n");

drivers/firmware/efi/capsule-loader.c

260

pr_err("capsule upload not complete\n");

drivers/firmware/efi/capsule-loader.c

329

pr_err("Unable to register capsule loader device\n");

drivers/firmware/efi/capsule-loader.c

47

pr_err("invalid capsule size\n");

drivers/firmware/efi/capsule-loader.c

57

pr_err("capsule not supported\n");

drivers/firmware/efi/capsule.c

156

pr_err("Conflicting capsule reset type %d (%d).\n",

drivers/firmware/efi/cper.c

423

pr_err(FW_WARN "valid bits set for fields beyond structure\n");

drivers/firmware/efi/cper.c

713

pr_err(FW_WARN "error section length is too small\n");

drivers/firmware/efi/efi-init.c

75

pr_err("Could not map primary_display config table\n");

drivers/firmware/efi/efi.c

1193

pr_err("Could not map UEFI random seed!\n");

drivers/firmware/efi/efi.c

1203

pr_err("Could not map UEFI random seed!\n");

drivers/firmware/efi/efi.c

330

pr_err("efivar_ssdt: failed to load table: %u\n",

drivers/firmware/efi/efi.c

340

pr_err("efivar_ssdt: failed to get var data: 0x%lx\n", status);

drivers/firmware/efi/efi.c

428

pr_err("Creating efi_rts_wq failed, EFI runtime services disabled.\n");

drivers/firmware/efi/efi.c

441

pr_err("efi: Firmware registration failed.\n");

drivers/firmware/efi/efi.c

453

pr_err("efi: failed to load SSDT, error %d.\n", error);

drivers/firmware/efi/efi.c

461

pr_err("efi: Sysfs attribute export failed with error %d.\n",

drivers/firmware/efi/efi.c

469

pr_err("efivars: Subsystem registration failed.\n");

drivers/firmware/efi/efi.c

726

pr_err("Table located above 4GB, disabling EFI.\n");

drivers/firmware/efi/efi.c

749

pr_err("Could not map UEFI random seed!\n");

drivers/firmware/efi/efi.c

759

pr_err("Could not map UEFI random seed!\n");

drivers/firmware/efi/efi.c

784

pr_err("Could not map UEFI memreserve entry!\n");

drivers/firmware/efi/efi.c

850

pr_err("System table signature incorrect!\n");

drivers/firmware/efi/efi.c

864

pr_err("Could not map the firmware vendor!\n");

drivers/firmware/efi/efibc.c

29

pr_err("failed to set EFI variable: 0x%lx\n", status);

drivers/firmware/efi/efibc.c

77

pr_err("unable to register reboot notifier\n");

drivers/firmware/efi/embedded-firmware.c

48

pr_err("Error mapping EFI mem at %#llx\n", md->phys_addr);

drivers/firmware/efi/esrt.c

266

pr_err("ESRT header doesn't fit on single memory map entry. (size: %zu max: %zu)\n",

drivers/firmware/efi/esrt.c

273

pr_err("early_memremap(%p, %zu) failed.\n", (void *)efi.esrt,

drivers/firmware/efi/esrt.c

282

pr_err("Unsupported ESRT version %lld.\n",

drivers/firmware/efi/esrt.c

289

pr_err("ESRT memory map entry can only hold the header. (max: %zu size: %zu)\n",

drivers/firmware/efi/esrt.c

302

pr_err("ESRT says fw_resource_count has very large value %d.\n",

drivers/firmware/efi/esrt.c

313

pr_err("ESRT does not fit on single memory map entry (size: %zu max: %zu)\n",

drivers/firmware/efi/esrt.c

344

pr_err("Unsupported ESRT version %lld.\n",

drivers/firmware/efi/esrt.c

351

pr_err("ESRT entry creation failed with error %d.\n",

drivers/firmware/efi/esrt.c

378

pr_err("memremap(%pa, %zu) failed.\n", &esrt_data,

drivers/firmware/efi/esrt.c

385

pr_err("Firmware table registration failed.\n");

drivers/firmware/efi/esrt.c

392

pr_err("Sysfs attribute export failed with error %d.\n",

drivers/firmware/efi/esrt.c

399

pr_err("kset creation failed.\n");

drivers/firmware/efi/fdtparams.c

123

pr_err("Can't find property '%s' in DT!\n", pname);

drivers/firmware/efi/memattr.c

164

pr_err("Failed to map EFI Memory Attributes table @ 0x%lx\n",

drivers/firmware/efi/memattr.c

194

pr_err("Error updating mappings, skipping subsequent md's\n");

drivers/firmware/efi/memattr.c

32

pr_err("Failed to map EFI Memory Attributes table @ 0x%lx\n",

drivers/firmware/efi/memmap.c

46

pr_err("Could not map the memory map! phys_map=%pa, size=0x%lx\n",

drivers/firmware/efi/mokvar-table.c

140

pr_err("Failed to map EFI MOKvar config table pa=0x%lx, size=%zu.\n",

drivers/firmware/efi/mokvar-table.c

177

pr_err("EFI MOKvar config table is not valid\n");

drivers/firmware/efi/mokvar-table.c

320

pr_err("Failed to map EFI MOKvar config table\n");

drivers/firmware/efi/mokvar-table.c

327

pr_err("Failed to create EFI mok-variables sysfs entry\n");

drivers/firmware/efi/mokvar-table.c

354

pr_err("Failed to create some EFI mok-variables sysfs entries\n");

drivers/firmware/efi/ovmf-debug-log.c

102

pr_err("OVMF debug log: sysfs register failed\n");

drivers/firmware/efi/ovmf-debug-log.c

75

pr_err("OVMF debug log: header map failed\n");

drivers/firmware/efi/ovmf-debug-log.c

93

pr_err("OVMF debug log: buffer map failed\n");

drivers/firmware/efi/riscv-runtime.c

113

pr_err("UEFI virtual mapping missing or invalid -- runtime services will not be available\n");

drivers/firmware/efi/riscv-runtime.c

72

pr_err("Failed to remap EFI memory map\n");

drivers/firmware/efi/runtime-wrappers.c

309

pr_err("Requested executing invalid EFI Runtime Service.\n");

drivers/firmware/efi/runtime-wrappers.c

344

pr_err("Failed to queue work to efi_rts_wq.\n");

drivers/firmware/efi/test/efi_test.c

770

pr_err("efi_test: can't misc_register on minor=%d\n",

drivers/firmware/efi/tpm.c

101

pr_err(FW_BUG "Failed to parse event in TPM Final Events Log\n");

drivers/firmware/efi/tpm.c

57

pr_err("Failed to map TPM Event Log table @ 0x%lx\n",

drivers/firmware/efi/tpm.c

65

pr_err("TPM Event Log memblock reserve fails (0x%lx, 0x%x)\n",

drivers/firmware/efi/tpm.c

82

pr_err("Failed to map TPM Final Event Log table @ 0x%lx\n",

drivers/firmware/efi/vars.c

112

pr_err("efivars not registered\n");

drivers/firmware/imx/imx-scu-irq.c

163

pr_err("enable irq failed, group %d, mask %d, ret %d\n",

drivers/firmware/imx/imx-scu-irq.c

98

pr_err("get irq group %d status failed, ret %d\n",

drivers/firmware/imx/imx-scu-soc.c

47

pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);

drivers/firmware/imx/imx-scu-soc.c

74

pr_err("%s: get soc info failed, ret %d\n", __func__, ret);

drivers/firmware/psci/psci.c

616

pr_err("MIGRATE_INFO_TYPE returned unknown type (%d)\n", type);

drivers/firmware/psci/psci.c

689

pr_err("Conflicting PSCI version detected.\n");

drivers/firmware/psci/psci_checker.c

102

pr_err("Unexpected return code %d while trying "

drivers/firmware/psci/psci_checker.c

108

pr_err("Error occurred (%d) while trying "

drivers/firmware/psci/psci_checker.c

122

pr_err("Error occurred (%d) while trying "

drivers/firmware/psci/psci_checker.c

332

pr_err("Failed to suspend CPU %d: error %d "

drivers/firmware/psci/psci_checker.c

401

pr_err("Failed to create kthread on CPU %d\n", cpu);

drivers/firmware/psci/psci_checker.c

463

pr_err("%d error(s) encountered in hotplug tests\n", ret);

drivers/firmware/psci/psci_checker.c

465

pr_err("Out of memory\n");

drivers/firmware/psci/psci_checker.c

475

pr_err("%d error(s) encountered in suspend tests\n", ret);

drivers/firmware/psci/psci_checker.c

479

pr_err("Out of memory\n");

drivers/firmware/psci/psci_checker.c

95

pr_err("Unexpected return code %d while trying "

drivers/firmware/qcom/qcom_scm.c

2660

pr_err("qcom_scm: err: %d\n", ret);

drivers/firmware/qcom/qcom_scm.c

326

pr_err("Unknown current SCM calling convention.\n");

drivers/firmware/qcom/qcom_scm.c

351

pr_err("Unknown current SCM calling convention.\n");

drivers/firmware/qcom/qcom_scm.c

378

pr_err("Unknown SMC convention being used\n");

drivers/firmware/smccc/smccc.c

92

pr_err("smccc_trng: could not register device: %ld\n",

drivers/firmware/smccc/soc_id.c

130

pr_err("Invalid SoC Version: %x\n", soc_id_version);

drivers/firmware/smccc/soc_id.c

136

pr_err("Invalid SoC Revision: %x\n", soc_id_rev);

drivers/firmware/stratix10-svc.c

423

pr_err("%s: poll status timeout\n", __func__);

drivers/firmware/stratix10-svc.c

431

pr_err("%s: poll status error\n", __func__);

drivers/firmware/stratix10-svc.c

793

pr_err("%s: STATUS_ERROR\n", __func__);

drivers/firmware/stratix10-svc.c

857

pr_err("%s: after SMC call -- res.a0=0x%016x", __func__,

drivers/firmware/tegra/bpmp-debugfs.c

130

pr_err("File name too large: %s\n", name);

drivers/firmware/tegra/bpmp-debugfs.c

221

pr_err("%s: read data length invalid\n", __func__);

drivers/firmware/tegra/bpmp-debugfs.c

348

pr_err("%s: read data length invalid\n", __func__);

drivers/firmware/tegra/ivc.c

565

pr_err("%s: queue_size (%u) must be %u-byte aligned\n",

drivers/firmware/tegra/ivc.c

585

pr_err("num_frames * frame_size overflows\n");

drivers/firmware/tegra/ivc.c

590

pr_err("frame size not adequately aligned: %zu\n", frame_size);

drivers/firmware/tegra/ivc.c

599

pr_err("IVC channel start not aligned: %#lx\n", rx);

drivers/firmware/tegra/ivc.c

604

pr_err("IVC channel start not aligned: %#lx\n", tx);

drivers/firmware/tegra/ivc.c

610

pr_err("queue regions overlap: %#lx + %zx > %#lx\n",

drivers/firmware/tegra/ivc.c

616

pr_err("queue regions overlap: %#lx + %zx > %#lx\n",

drivers/firmware/ti_sci.c

3300

pr_err("I need a device pointer\n");

drivers/firmware/ti_sci.c

3422

pr_err("I need a device pointer\n");

drivers/firmware/xilinx/zynqmp.c

1767

pr_err("unable to set shutdown scope %s\n", buf);

drivers/fpga/of-fpga-region.c

174

pr_err("firmware-name not allowed in child FPGA region: %pOF",

drivers/gnss/core.c

385

pr_err("failed to allocate device numbers: %d\n", ret);

drivers/gnss/core.c

392

pr_err("failed to create class: %d\n", ret);

drivers/gpib/agilent_82350b/agilent_82350b.c

862

pr_err("pci_register_driver failed: error = %d\n", result);

drivers/gpib/agilent_82350b/agilent_82350b.c

868

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/agilent_82350b/agilent_82350b.c

874

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/agilent_82357a/agilent_82357a.c

1670

pr_err("usb_register failed: error = %d\n", ret);

drivers/gpib/agilent_82357a/agilent_82357a.c

1676

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1474

pr_err("pci_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1480

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1486

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1492

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1498

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1504

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1510

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1517

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1523

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1529

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

1535

pr_err("pcmcia_register_driver failed: error = %d\n", ret);

drivers/gpib/cb7210/cb7210.c

925

pr_err("failed to allocate pseudo_irq\n");

drivers/gpib/cec/cec_gpib.c

373

pr_err("pci_register_driver failed: error = %d\n", result);

drivers/gpib/cec/cec_gpib.c

379

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/common/gpib_os.c

142

pr_err("gpib: bug! pseudo_irq.handler is NULL\n");

drivers/gpib/common/gpib_os.c

2231

pr_err("gpib: can't get major %d\n", GPIB_CODE);

drivers/gpib/common/gpib_os.c

2236

pr_err("gpib: failed to create gpib class\n");

drivers/gpib/common/gpib_os.c

505

pr_err("gpib: invalid handle %i\n", handle);

drivers/gpib/common/gpib_os.c

518

pr_err("gpib: failed to allocate default board descriptor\n");

drivers/gpib/common/gpib_os.c

534

pr_err("gpib: invalid minor number of device file\n");

drivers/gpib/common/gpib_os.c

573

pr_err("gpib: invalid minor number of device file\n");

drivers/gpib/common/gpib_os.c

619

pr_err("gpib: invalid minor number of device file\n");

drivers/gpib/eastwood/fluke_gpib.c

1136

pr_err("platform_driver_register failed: error = %d\n", result);

drivers/gpib/eastwood/fluke_gpib.c

1142

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/eastwood/fluke_gpib.c

1148

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/eastwood/fluke_gpib.c

1154

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/eastwood/fluke_gpib.c

545

pr_err("dma pause failed?\n");

drivers/gpib/fmh_gpib/fmh_gpib.c

1691

pr_err("platform_driver_register failed: error = %d\n", result);

drivers/gpib/fmh_gpib/fmh_gpib.c

1697

pr_err("pci_register_driver failed: error = %d\n", result);

drivers/gpib/fmh_gpib/fmh_gpib.c

1703

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/fmh_gpib/fmh_gpib.c

1709

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/fmh_gpib/fmh_gpib.c

1715

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/fmh_gpib/fmh_gpib.c

1721

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/fmh_gpib/fmh_gpib.c

561

pr_err("dma pause failed?\n");

drivers/gpib/gpio/gpib_bitbang.c

1133

pr_err("NULL gpib dev for board\n");

drivers/gpib/gpio/gpib_bitbang.c

1340

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/hp_82335/hp82335.c

337

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/hp_82341/hp_82341.c

492

pr_err("failed to find isapnp board\n");

drivers/gpib/hp_82341/hp_82341.c

496

pr_err("board already active, skipping\n");

drivers/gpib/hp_82341/hp_82341.c

501

pr_err("failed to activate(), aborting\n");

drivers/gpib/hp_82341/hp_82341.c

506

pr_err("invalid port or irq, aborting\n");

drivers/gpib/hp_82341/hp_82341.c

527

pr_err("bug! unknown hw_version\n");

drivers/gpib/hp_82341/hp_82341.c

547

pr_err("bug! unknown hw_version\n");

drivers/gpib/hp_82341/hp_82341.c

568

pr_err("invalid irq=%i for 82341C, irq must be 3, 5, 7, 9, 10, 11, 12, or 15.\n",

drivers/gpib/hp_82341/hp_82341.c

576

pr_err("bug! unknown hw_version\n");

drivers/gpib/hp_82341/hp_82341.c

598

pr_err("timed out waiting for Xilinx ready.\n");

drivers/gpib/hp_82341/hp_82341.c

611

pr_err("timed out waiting for Xilinx done.\n");

drivers/gpib/hp_82341/hp_82341.c

623

pr_err("board needs be initialized with firmware upload.\n"

drivers/gpib/hp_82341/hp_82341.c

630

pr_err("bad firmware length=%i for 82341c (expected %i).\n",

drivers/gpib/hp_82341/hp_82341.c

637

pr_err("bad firmware length=%i for 82341d (expected %i).\n",

drivers/gpib/hp_82341/hp_82341.c

643

pr_err("bug! unknown hw_version\n");

drivers/gpib/hp_82341/hp_82341.c

818

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/hp_82341/hp_82341.c

824

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1406

pr_err("pci_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1412

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1418

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1424

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1430

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1437

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1443

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1449

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

1455

pr_err("pcmcia_register_driver failed: error = %d\n", ret);

drivers/gpib/ines/ines_gpib.c

63

pr_err("bug! tried to set xfer counter > 0xffff\n");

drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c

1106

pr_err("gpib_register_driver failed: error = %d\n", rv);

drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c

1117

pr_err("CODE BUG: USB minor %d registered at %d.\n",

drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c

1137

pr_err("No slot available for interface %p minor %d\n", interface, interface->minor);

drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c

1159

pr_err("CODE BUG: USB minor %d not found.\n", minor);

drivers/gpib/lpvo_usb_gpib/lpvo_usb_gpib.c

1732

pr_err("can't find device for minor %d\n", subminor);

drivers/gpib/ni_usb/ni_usb_gpib.c

2659

pr_err("usb_register failed: error = %d\n", ret);

drivers/gpib/ni_usb/ni_usb_gpib.c

2665

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/ni_usb/ni_usb_gpib.c

381

pr_err("parse error: wrong start id\n");

drivers/gpib/ni_usb/ni_usb_gpib.c

390

pr_err("parse error: wrong end id\n");

drivers/gpib/ni_usb/ni_usb_gpib.c

394

pr_err("parse error: wrong count=%i for NIUSB_REGISTER_READ_DATA_END\n",

drivers/gpib/ni_usb/ni_usb_gpib.c

400

pr_err("unexpected data: raw_data[%i]=0x%x, expected 0\n",

drivers/gpib/ni_usb/ni_usb_gpib.c

418

pr_err("received unexpected termination block\n");

drivers/gpib/ni_usb/ni_usb_gpib.c

419

pr_err(" expected: 0x%x 0x%x 0x%x 0x%x\n", NIUSB_TERM_ID, 0x0, 0x0, 0x0);

drivers/gpib/ni_usb/ni_usb_gpib.c

420

pr_err(" received: 0x%x 0x%x 0x%x 0x%x\n",

drivers/gpib/ni_usb/ni_usb_gpib.c

446

pr_err("unexpected data: raw_data[%i]=0x%x, expected 0\n",

drivers/gpib/ni_usb/ni_usb_gpib.c

451

pr_err("Unexpected NIUSB_IBRD ID\n");

drivers/gpib/ni_usb/ni_usb_gpib.c

465

pr_err("bug: status->id=%i, != ibrd_status_id\n", status->id);

drivers/gpib/ni_usb/ni_usb_gpib.c

476

pr_err("bug: discarded data. actual_bytes_read=%i, j=%i\n", *actual_bytes_read, j);

drivers/gpib/ni_usb/ni_usb_gpib.c

479

pr_err("unexpected data: raw_data[%i]=0x%x, expected 0\n",

drivers/gpib/ni_usb/ni_usb_gpib.c

485

pr_err("unexpected data: register write status id=0x%x, expected 0x%x\n",

drivers/gpib/ni_usb/ni_usb_gpib.c

490

pr_err("unexpected data: register write count=%i, expected 2\n",

drivers/gpib/ni_usb/ni_usb_gpib.c

496

pr_err("unexpected data: raw_data[%i]=0x%x, expected 0\n",

drivers/gpib/ni_usb/ni_usb_gpib.c

83

pr_err("bug? usec is greater than 1e9\n");

drivers/gpib/pc2/pc2_gpib.c

641

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/pc2/pc2_gpib.c

647

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/pc2/pc2_gpib.c

653

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/pc2/pc2_gpib.c

659

pr_err("gpib_register_driver failed: error = %d\n", ret);

drivers/gpib/tms9914/tms9914.c

182

pr_err("bug! bad holdoff mode %i\n", mode);

drivers/gpib/tnt4882/mite.c

76

pr_err("mite: error enabling mite.\n");

drivers/gpib/tnt4882/mite.c

81

pr_err("mite: failed to request mite io regions.\n");

drivers/gpib/tnt4882/mite.c

88

pr_err("mite: failed to remap mite io memory address.\n");

drivers/gpib/tnt4882/mite.c

95

pr_err("mite: failed to remap daq io memory address.\n");

drivers/gpib/tnt4882/tnt4882_gpib.c

1395

pr_err("pci_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1401

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1407

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1413

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1419

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1425

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1431

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1437

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1443

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1450

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1456

pr_err("gpib_register_driver failed: error = %d\n", result);

drivers/gpib/tnt4882/tnt4882_gpib.c

1462

pr_err("pcmcia_register_driver failed: error = %d\n", result);

drivers/gpio/gpio-aggregator.c

1398

pr_err("Cannot parse %s: %d\n", offsets, error);

drivers/gpio/gpio-aggregator.c

1427

pr_err("No GPIOs specified\n");

drivers/gpio/gpio-aggregator.c

1693

pr_err("Failed to register the '%s' configfs subsystem: %d\n",

drivers/gpio/gpio-aggregator.c

1708

pr_err("Failed to register the platform driver: %d\n", ret);

drivers/gpio/gpio-f7188x.c

130

pr_err("I/O address 0x%04x already in use\n", base);

drivers/gpio/gpio-f7188x.c

611

pr_err("Platform data allocation failed\n");

drivers/gpio/gpio-f7188x.c

617

pr_err("Device addition failed\n");

drivers/gpio/gpio-it87.c

326

pr_err("no device\n");

drivers/gpio/gpio-it87.c

329

pr_err("Unknown Chip found, Chip %04x Revision %x\n",

drivers/gpio/gpio-loongson.c

130

pr_err("error registering loongson GPIO driver\n");

drivers/gpio/gpio-lpc18xx.c

195

pr_err("failed to allocate parent irq %u: %d\n",

drivers/gpio/gpio-lpc18xx.c

255

pr_err("unable to add irq domain\n");

drivers/gpio/gpio-mockup.c

570

pr_err("error registering device");

drivers/gpio/gpio-mockup.c

603

pr_err("error registering platform driver\n");

drivers/gpio/gpio-mxc.c

249

pr_err("mxc: invalid configuration for GPIO %d: %x\n",

drivers/gpio/gpio-mxc.c

704

pr_err("mxc: failed to enable gpio clock %d\n", ret);

drivers/gpio/gpio-pxa.c

473

pr_err("%s() unknown irq %d\n", __func__, in_irq);

drivers/gpio/gpio-sch311x.c

100

pr_err(DRV_NAME "I/O address 0x%04x already in use\n",

drivers/gpio/gpio-sch311x.c

369

pr_err("Base address not set\n");

drivers/gpio/gpio-sch311x.c

396

pr_err(DRV_NAME "Platform data allocation failed\n");

drivers/gpio/gpio-sch311x.c

402

pr_err(DRV_NAME "Device addition failed\n");

drivers/gpio/gpio-sim.c

1615

pr_err("Error %d while registering the platform driver\n", ret);

drivers/gpio/gpio-sim.c

1623

pr_err("Error %d while registering the configfs subsystem %s\n",

drivers/gpio/gpio-tb10x.c

63

pr_err("Only (both) edge triggered interrupts supported.\n");

drivers/gpio/gpio-virtuser.c

1755

pr_err("Failed to register the platform driver: %d\n", ret);

drivers/gpio/gpio-virtuser.c

1763

pr_err("Failed to register the '%s' configfs subsystem: %d\n",

drivers/gpio/gpio-virtuser.c

1772

pr_err("Failed to create the debugfs tree: %d\n", ret);

drivers/gpio/gpio-winbond.c

584

pr_err("please use 'gpios' module parameter to select some active GPIO ports to enable\n");

drivers/gpio/gpio-winbond.c

607

pr_err("not an our chip\n");

drivers/gpio/gpio-winbond.c

630

pr_err("some GPIO ports are set both to push-pull and open drain mode at the same time\n");

drivers/gpio/gpio-zynqmp-modepin.c

79

pr_err("modepin: set value error %d for pin %d\n", ret, pin);

drivers/gpio/gpiolib-cdev.c

2551

pr_err("Failed to allocate memory for line info notification\n");

drivers/gpio/gpiolib-of.c

1110

pr_err("%pOF: Group name of numeric GPIO ranges must be the empty string.\n",

drivers/gpio/gpiolib-of.c

1138

pr_err("%pOF: Illegal gpio-range format.\n",

drivers/gpio/gpiolib-of.c

1144

pr_err("%pOF: GPIO group range requested but no %s property.\n",

drivers/gpio/gpiolib-of.c

1156

pr_err("%pOF: Group name of GPIO group range cannot be the empty string.\n",

drivers/gpio/gpiolib-of.c

927

pr_err("%s: failed to add hogs for %pOF\n", __func__,

drivers/gpio/gpiolib-shared.c

796

pr_err("Failed to scan OF nodes for shared GPIOs: %d\n", ret);

drivers/gpio/gpiolib-swnode.c

171

pr_err("failed to register swnode: %d\n", ret);

drivers/gpio/gpiolib.c

1268

pr_err("%s: GPIOs %d..%d (%s) failed to register, %d\n", __func__,

drivers/gpio/gpiolib.c

366

pr_err("%s: cannot find free range\n", __func__);

drivers/gpio/gpiolib.c

5051

pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n",

drivers/gpio/gpiolib.c

5288

pr_err("gpiolib: could not register GPIO bus type\n");

drivers/gpio/gpiolib.c

5294

pr_err("gpiolib: could not register GPIO stub driver\n");

drivers/gpio/gpiolib.c

5301

pr_err("gpiolib: failed to allocate char dev region\n");

drivers/gpu/drm/adp/adp-mipi.c

190

pr_err("failed to add dsi_host component: %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c

669

pr_err("Invalid engine in IB submission: %d\n", engine);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.c

146

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_arcturus.c

263

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c

204

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c

250

pr_err("Fail to program VMID-PASID mapping\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gc_9_4_3.c

82

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c

312

pr_err("Failed to alloc KIQ (%d).\n", r);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c

396

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c

583

pr_err("CP HQD IQ timer status time out\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c

597

pr_err("CP HQD dequeue request time out\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c

615

pr_err("cp queue preemption time out.\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c

647

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c

705

pr_err("trying to set page table base for wrong VMID %u\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c

298

pr_err("Failed to alloc KIQ (%d).\n", r);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c

382

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c

538

pr_err("cp queue pipe %d queue %d preemption failed\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10_3.c

571

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c

283

pr_err("Failed to alloc KIQ (%d).\n", r);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c

367

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c

523

pr_err("cp queue pipe %d queue %d preemption failed\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c

556

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c

602

pr_err("trying to set page table base for wrong VMID %u\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c

259

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c

418

pr_err("CP HQD IQ timer status time out\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c

432

pr_err("CP HQD dequeue request time out\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c

449

pr_err("cp queue preemption time out\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c

480

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c

543

pr_err("trying to set page table base for wrong VMID\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c

282

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c

453

pr_err("CP HQD IQ timer status time out\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c

467

pr_err("CP HQD dequeue request time out\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c

484

pr_err("cp queue preemption time out.\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c

515

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c

578

pr_err("trying to set page table base for wrong VMID\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c

323

pr_err("Failed to alloc KIQ (%d).\n", r);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c

407

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c

565

pr_err("cp queue preemption time out.\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c

597

pr_err("SDMA RLC not idle in %s\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c

917

pr_err("trying to set page table base for wrong VMID %u\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1074

pr_err("%s: Failed to set userptr: %d\n", __func__, ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1080

pr_err("%s: Failed to register MMU notifier: %d\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1111

pr_err("%s: Failed to get user pages: %d\n", __func__, ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1117

pr_err("%s: Failed to reserve BO\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1126

pr_err("%s: failed to validate BO\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1191

pr_err("Failed to reserve buffers in ttm.\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1241

pr_err("Failed to reserve buffers in ttm.\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1310

pr_err("amdgpu_vm_bo_update failed\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1329

pr_err("Failed to map VA 0x%llx in vm. ret %d\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1339

pr_err("update_gpuvm_pte() failed\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1428

pr_err("Failed to create eviction fence\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1453

pr_err("validate_pt_pd_bos() failed\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1536

pr_err("Error in Pinning BO to domain: %d\n", domain);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

1853

pr_err("Pinning MMIO/DOORBELL BO during ALLOC FAILED\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2030

pr_err("Invalid BO when mapping memory to GPU\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

209

pr_err("%s: Invalid BO type %#x\n", __func__, alloc_flag);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2093

pr_err("Failed to map bo to gpuvm\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2099

pr_err("Failed to update page directories\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2237

pr_err("Failed to reserve bo. ret %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2243

pr_err("Failed to pin bo. ret %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2249

pr_err("Failed to bind bo to GART. ret %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2291

pr_err("userptr can't be mapped to kernel\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2299

pr_err("Failed to reserve bo. ret %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2305

pr_err("Failed to pin bo. ret %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2311

pr_err("Failed to map bo to kernel. ret %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2521

pr_err("Failed to quiesce KFD\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2588

pr_err("%s: Failed to invalidate userptr BO\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2620

pr_err("Pid %d unmapped memory before destroying userptr at GPU addr 0x%llx\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2716

pr_err("%s: failed to validate BO\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2734

pr_err("%s: update PTE failed\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2858

pr_err("%s: Failed to resume KFD\n", __func__);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2939

pr_err("Locking VM PD failed, ret: %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

295

pr_err("%s: Invalid BO type %#x\n", __func__, alloc_flag);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

2955

pr_err("drm_exec_prepare_obj failed, ret: %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

3088

pr_err("Failed to create eviction fence\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

3153

pr_err("Reserve gws bo failed %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

3159

pr_err("GWS BO validate failed %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

3205

pr_err("Reserve gws bo failed %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

353

pr_err("Error in creating DMA mappable SG BO on domain: %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

491

pr_err("failed to validate PT BOs\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

602

pr_err("DMA map userptr failed: %d\n", ret);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

662

pr_err("SG Table of %d BO for peer device is UNEXPECTEDLY NON-NULL", mmio);

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

885

pr_err("Invalid VA when adding BO to VM\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c

983

pr_err("Failed to add BO object to VM. ret == %d\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c

130

pr_err("failed to evaluate ATPX got %s\n",

drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c

186

pr_err("ATPX buffer is too small: %zu\n", size);

drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c

265

pr_err("ATPX buffer is too small: %zu\n", size);

drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c

1082

pr_err("critical bug! too many kiq readers\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c

592

pr_err("Move buffer fallback to memcpy unavailable\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c

551

pr_err("xGMI error counters not enabled!\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c

593

pr_err("failed to create xgmi_error\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c

598

pr_err("failed to create xgmi_num_hops\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c

603

pr_err("failed to create xgmi_num_links\n");

drivers/gpu/drm/amd/amdgpu/cik_sdma.c

146

pr_err("cik_sdma: Failed to load firmware \"%s_sdma%s.bin\"\n",

drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c

391

pr_err("gfx6: Failed to load firmware %s gfx firmware\n", chip_name);

drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c

976

pr_err("gfx7: Failed to load firmware %s gfx firmware\n", chip_name);

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c

4870

pr_err("cp is busy, skip halt cp\n");

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c

4874

pr_err("rlc is busy, skip halt rlc\n");

drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c

4212

pr_err("critical bug! too many kiq readers\n");

drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c

4269

pr_err("failed to read gpu clock\n");

drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c

163

pr_err("cik_mc: Failed to load firmware \"%s_mc.bin\"\n", chip_name);

drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c

265

pr_err("mc: Failed to load firmware \"%s_mc.bin\"\n", chip_name);

drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c

333

pr_err("RCV_MSG_VALID is not cleared\n");

drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c

398

pr_err("Doesn't get ack from pf.\n");

drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c

418

pr_err("Doesn't get ack from pf.\n");

drivers/gpu/drm/amd/amdgpu/mxgpu_vi.c

451

pr_err("Doesn't get ack from pf, give up\n");

drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c

174

pr_err("sdma_v2_4: Failed to load firmware \"%s_sdma%s.bin\"\n",

drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c

332

pr_err("sdma_v3_0: Failed to load firmware \"%s_sdma%s.bin\"\n",

drivers/gpu/drm/amd/amdgpu/soc15_common.h

131

pr_err("timeout: rlcg program reg:0x%05x failed !\n", reg); \

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1094

pr_err("Address: 0x%llx already allocated by SVM\n",

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1107

pr_err("User Buffer Address: 0x%llx already allocated by SVM\n",

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1127

pr_err("Alloc host visible vram on small bar is not allowed\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1222

pr_err("Free signal BO is not allowed\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1229

pr_err("Process device data doesn't exist\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1786

pr_err("Failed to copy process information to user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1830

pr_err("Failed to copy device information to user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1839

pr_err("Failed to copy device information to user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1880

pr_err("dmabuf export failed for the BO\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1886

pr_err("dmabuf create fd failed, ret:%d\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

1979

pr_err("Failed to obtain user address for user-pointer bo\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

198

pr_err("Queue percentage must be between 0 to KFD_MAX_QUEUE_PERCENTAGE\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2024

pr_err("Failed to copy BO information to user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

203

pr_err("Queue priority must be between 0 to KFD_MAX_QUEUE_PRIORITY\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2031

pr_err("Failed to copy BO priv information to user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2095

pr_err("No pdd for given process\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

210

pr_err("Can't access ring base address\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2102

pr_err("Cannot dump process when queues are not in evicted state\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

215

pr_err("Ring size must be a power of 2 or 0\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2163

pr_err("Failed to dump CRIU ret:%d\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2185

pr_err("Failed to copy process private information from user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2192

pr_err("Invalid CRIU API version (checkpointed:%d current:%d)\n",

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2199

pr_err("xnack mode cannot be set\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2234

pr_err("Failed to copy devices buckets from user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2247

pr_err("Invalid user gpu_id\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

225

pr_err("Metadata ring size must be a power of 2 or 0\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2254

pr_err("Failed to find device with gpu_id = %x\n",

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2262

pr_err("Failed to get pdd for gpu_id = %x\n",

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2271

pr_err("Invalid render node file descriptor sent from plugin (%d)\n",

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2284

pr_err("could not init vm for given pdd\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

231

pr_err("Can't access read pointer\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2340

pr_err("Invalid page size\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2345

pr_err("amdgpu_amdkfd_get_mmio_remap_phys_addr failed\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2356

pr_err("Could not create the BO\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2368

pr_err("Could not allocate idr\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

237

pr_err("Can't access write pointer\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2404

pr_err("Failed to get pdd\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2433

pr_err("Failed to map to gpu %d/%d\n", j, p->n_pdds);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2483

pr_err("Failed to copy BOs information from user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2497

pr_err("Failed to copy BOs information from user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2544

pr_err("Invalid private data size\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2550

pr_err("Failed to copy private information from user\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2574

pr_err("Invalid object type:%u at index:%d\n", object_type, i);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2625

pr_err("Invalid private data size\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2632

pr_err("Failed to restore CRIU ret:%d\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2654

pr_err("Failed to unpause queues ret:%d\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2676

pr_err("Cannot find pid info for %i\n", args->pid);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2693

pr_err("kfd_criu_resume_svm failed for %i\n", args->pid);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2699

pr_err("amdgpu_amdkfd_criu_resume failed for %i\n", args->pid);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2717

pr_err("No pdd for given process\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

2953

pr_err("Debugging does not support sched_policy %i", sched_policy);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

3006

pr_err("PID %i is not PTRACED and cannot be debugged\n", args->pid);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

3017

pr_err("PID %i not debug enabled for op %i\n", args->pid, args->op);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

3142

pr_err("Invalid option: %i\n", args->op);

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

361

pr_err("sdma_engine_id %i exceeds maximum id of %i\n",

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

460

pr_err("Queue percentage must be between 0 to KFD_MAX_QUEUE_PERCENTAGE\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

465

pr_err("Queue priority must be between 0 to KFD_MAX_QUEUE_PRIORITY\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

472

pr_err("Can't access ring base address\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

477

pr_err("Ring size must be a power of 2 or 0\n");

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

2035

pr_err("SRAT table error: %s\n", err);

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

2053

pr_err("SRAT invalid zero length\n");

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

2449

pr_err("VCRAT not implemented for APU\n");

drivers/gpu/drm/amd/amdkfd/kfd_debug.c

646

pr_err("Failed to release debug vmid on [%i]\n", pdd->dev->id);

drivers/gpu/drm/amd/amdkfd/kfd_debug.c

814

pr_err("Failed to get file for (%i)\n", fd);

drivers/gpu/drm/amd/amdkfd/kfd_debugfs.c

63

pr_err("Invalid input for gpu id.\n");

drivers/gpu/drm/amd/amdkfd/kfd_debugfs.c

71

pr_err("Invalid input for gpu id.\n");

drivers/gpu/drm/amd/amdkfd/kfd_debugfs.c

79

pr_err("Cannot find device %d.\n", gpu_id);

drivers/gpu/drm/amd/amdkfd/kfd_device.c

1815

pr_err("HWS is not enabled");

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c

3404

pr_err("copy_to_user failed on queue resume\n");

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c

3521

pr_err("copy_to_user failed on queue suspend\n");

drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c

90

pr_err("failed to allocate kernel doorbells\n");

drivers/gpu/drm/amd/amdkfd/kfd_events.c

1069

pr_err("Event page mmap requested illegal size\n");

drivers/gpu/drm/amd/amdkfd/kfd_events.c

335

pr_err("Event page size %llu is too small, need at least %lu bytes\n",

drivers/gpu/drm/amd/amdkfd/kfd_events.c

365

pr_err("Event page is already set\n");

drivers/gpu/drm/amd/amdkfd/kfd_events.c

371

pr_err("Getting device by id failed in %s\n", __func__);

drivers/gpu/drm/amd/amdkfd/kfd_events.c

383

pr_err("Can't find BO, offset is 0x%llx\n", event_page_offset);

drivers/gpu/drm/amd/amdkfd/kfd_events.c

389

pr_err("Failed to map event page to kernel\n");

drivers/gpu/drm/amd/amdkfd/kfd_events.c

395

pr_err("Failed to set event page\n");

drivers/gpu/drm/amd/amdkfd/kfd_events.c

589

pr_err("Failed to copy events priv to user\n");

drivers/gpu/drm/amd/amdkfd/kfd_migrate.c

1069

pr_err("failed to register HMM device memory\n");

drivers/gpu/drm/amd/amdkfd/kfd_module.c

36

pr_err("sched_policy has invalid value\n");

drivers/gpu/drm/amd/amdkfd/kfd_module.c

44

pr_err("max_num_of_queues_per_device must be between 1 to KFD_MAX_NUM_OF_QUEUES_PER_DEVICE\n");

drivers/gpu/drm/amd/amdkfd/kfd_module.c

74

pr_err("KFD is disabled due to module initialization failure\n");

drivers/gpu/drm/amd/amdkfd/kfd_packet_manager_v9.c

369

pr_err("Invalid dequeue wait cmd\n");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

1662

pr_err("Creating kfd process: failed to alloc an id\n");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

2135

pr_err("Failed to evict queues of process pid %d\n", p->lead_thread->pid);

drivers/gpu/drm/amd/amdkfd/kfd_process.c

2155

pr_err("Failed to restore queues of process pid %d\n",

drivers/gpu/drm/amd/amdkfd/kfd_process.c

2206

pr_err("Failed to suspend process pid %d\n", p->lead_thread->pid);

drivers/gpu/drm/amd/amdkfd/kfd_process.c

2220

pr_err("Restore process pid %d failed during resume\n",

drivers/gpu/drm/amd/amdkfd/kfd_process.c

356

pr_err("Invalid attribute");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

416

pr_err("Invalid attribute");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

441

pr_err("Invalid attribute");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

1029

pr_err("Failed to get pdd\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

1048

pr_err("Failed to create new queue err:%d\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

1057

pr_err("Failed to restore queue (%d)\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

1081

pr_err("amdkfd: queue dumping not supported on this device\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

116

pr_err("Queue id does not match any known queue\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

127

pr_err("Process device data doesn't exist\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

198

pr_err("Process device data doesn't exist\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

276

pr_err("failed to allocate gang context bo\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

285

pr_err("Queue memory allocated to wrong device\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

293

pr_err("Failed to map wptr bo to GART\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

340

pr_err("Process device data doesn't exist\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

445

pr_err("process pid %d DQM create queue type %d failed. ret %d\n",

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

506

pr_err("Queue id does not match any known queue\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

520

pr_err("Process device data doesn't exist\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

539

pr_err("Pasid 0x%x destroy queue %d failed, ret %d\n",

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

54

pr_err("Cannot create new queue because requested qid(%u) is in use\n", qid);

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

746

pr_err("Failed to get queue dump info (%d)\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

780

pr_err("Unsupported queue type (%d)\n", q->properties.type);

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

805

pr_err("amdkfd: queue dumping not supported on this device\n");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

852

pr_err("Failed checkpoint queue_mqd (%d)\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

880

pr_err("Unsupported queue type (%d)\n", q->properties.type);

drivers/gpu/drm/amd/amdkfd/kfd_svm.c

4025

pr_err("failed to get mm for the target process\n");

drivers/gpu/drm/amd/amdkfd/kfd_svm.c

4090

pr_err("CRIU: failed to set range attributes\n");

drivers/gpu/drm/amd/amdkfd/kfd_svm.c

4136

pr_err("failed to allocate memory to store svm metadata\n");

drivers/gpu/drm/amd/amdkfd/kfd_svm.c

4235

pr_err("failed to get mm for the target process\n");

drivers/gpu/drm/amd/amdkfd/kfd_svm.c

4286

pr_err("CRIU: failed to obtain range attributes\n");

drivers/gpu/drm/amd/amdkfd/kfd_svm.c

4292

pr_err("Failed to copy svm priv to user\n");

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

1031

pr_err("Error creating VCRAT table for CPU\n");

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

1039

pr_err("Error parsing VCRAT table for CPU\n");

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

1058

pr_err("Failed to update topology in sysfs ret=%d\n", ret);

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

184

pr_err("No memory to allocate a topology device");

drivers/gpu/drm/amd/include/amd_pcie_helpers.h

129

pr_err("Cannot find a valid PCIE lane width!\n");

drivers/gpu/drm/amd/include/amd_pcie_helpers.h

85

pr_err("No valid PCIE lane width reported\n");

drivers/gpu/drm/amd/pm/amdgpu_dpm.c

682

pr_err("smu firmware loading failed\n");

drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c

173

pr_err("powerplay hw init failed\n");

drivers/gpu/drm/amd/pm/powerplay/amd_powerplay.c

316

pr_err("fw load failed\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppatomctrl.c

147

pr_err("Could not retrieve the VramInfo table!");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppatomctrl.c

152

pr_err("Invalid VramInfo table.");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppatomctrl.c

155

pr_err("Invalid VramInfo table.");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppatomctrl.c

188

pr_err("Could not retrieve the VramInfo table!");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppatomctrl.c

193

pr_err("Invalid VramInfo table.");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/ppatomctrl.c

196

pr_err("Invalid VramInfo table.");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/process_pptables_v1_0.c

506

pr_err("Number of Pcie Entries exceed the number of SCLK Dpm Levels! Disregarding the excess entries...\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/process_pptables_v1_0.c

542

pr_err("Number of Pcie Entries exceed the number of SCLK Dpm Levels! Disregarding the excess entries...\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

139

pr_err("Can not allocate memory!\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1510

pr_err("Invalid power profile mode %ld\n", input[size]);

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1555

pr_err("Fine grain not support\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1560

pr_err("pp_od_clk_voltage is not accessible if power_dpm_force_performance_level is not in manual mode!\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1566

pr_err("Input parameter number not correct\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1576

pr_err("Fine grain setting minimum sclk (%ld) MHz is less than the minimum allowed (%d) MHz\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1587

pr_err("Fine grain setting maximum sclk (%ld) MHz is greater than the maximum allowed (%d) MHz\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1597

pr_err("Input parameter number not correct\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1612

pr_err("Input parameter number not correct\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

1617

pr_err("The setting minimum sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

561

pr_err("smu10_initialize_dpm_defaults failed\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu10_hwmgr.c

569

pr_err("smu10_get_system_info_data failed\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c

1289

pr_err("Failed to enable Sclk DPM and Mclk DPM!");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c

1384

pr_err("Unknown throttling event sources.");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_powertune.c

1187

pr_err("Failed to set Default Power Limit in SMC!");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu8_hwmgr.c

1132

pr_err("smu8_initialize_dpm_defaults failed\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu8_hwmgr.c

1138

pr_err("smu8_get_system_info_data failed\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu8_hwmgr.c

282

pr_err("Can not allocate memory!\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu8_hwmgr.c

322

pr_err("Could not retrieve the Integrated System Info Table!\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu8_hwmgr.c

327

pr_err("Unsupported IGP table: %d %d\n", frev, crev);

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu8_hwmgr.c

354

pr_err("The htcTmpLmt should be larger than htcHystLmt.\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu_helper.c

117

pr_err("Invalid Hardware Manager!");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu_helper.c

147

pr_err("Invalid Hardware Manager!");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu_helper.c

501

pr_err("Can not allocate space for vddc_dep_on_dal_pwrl! \n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu_helper.c

576

pr_err("DAL requested level can not"

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c

1481

pr_err("Invalid index for retrieving clock activity\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c

2079

pr_err("Clock level specified %d is over max allowed %d\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c

2106

pr_err("Clock level specified %d is over max allowed %d\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega12_hwmgr.c

421

pr_err("%s failed\n", __func__);

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

2206

pr_err("Invalid index for retrieving clock activity\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

2579

pr_err("Clock level specified %d is over max allowed %d\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

2606

pr_err("Clock level specified %d is over max allowed %d\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

2634

pr_err("Clock level specified %d is over max allowed %d\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

2662

pr_err("Clock level specified %d is over max allowed %d\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

2689

pr_err("Clock level specified %d is over max allowed %d\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

4151

pr_err("Invalid power profile mode %d\n", power_profile_mode);

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

4337

pr_err("Df cstate control is supported with 40.50 and later SMC fw!\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

4344

pr_err("SetDfCstate failed!\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

4359

pr_err("SetXgmiPstate failed!\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

465

pr_err("%s failed\n", __func__);

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega20_hwmgr.c

515

pr_err("Failed to apply vega20 baco workaround!\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

119

pr_err("smc_start_address invalid \n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

1702

pr_err("VBIOS did not find boot engine clock value in dependency table. Using Graphics DPM level 0!\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

1712

pr_err("VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

2330

pr_err("SMC address is beyond the SMC RAM area.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

2345

pr_err("SMC size must be divisible by 4\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

422

pr_err("vdd_dep_on_sclk table is NULL\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

685

pr_err("Attempt to get pm_fuse_table_offset Failed!\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

99

pr_err("smc_addr invalid \n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

1663

pr_err("VBIOS did not find boot engine clock value in dependency table. Using Graphics DPM level 0!\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

1673

pr_err("VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

197

pr_err("[ powerplay ] SMC ucode is not 4 bytes aligned\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

202

pr_err("[ powerplay ] SMC address is beyond the SMC RAM area\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu10_smumgr.c

198

pr_err("Attempt to read SMC IF Version Number Failed!\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu7_smumgr.c

392

pr_err("SMU load firmware failed\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

116

pr_err("SMC address must be 4 byte aligned\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

121

pr_err("SMC address beyond the SMC RAM area\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

167

pr_err("SMU check loaded firmware failed.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

345

pr_err("Invalid Firmware Type\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

382

pr_err("Invalid Firmware Type\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

719

pr_err("SMU firmware load failed\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

725

pr_err("Mec Firmware load failed\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

799

pr_err("Error when Populate Firmware Entry.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

807

pr_err("Error when Populate Firmware Entry.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

814

pr_err("Error when Populate Firmware Entry.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

82

pr_err("%s(0x%04x) aborted; SMU still servicing msg (0x%04x)\n",

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

822

pr_err("Error when Populate Firmware Entry.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu8_smumgr.c

830

pr_err("Error when Populate Firmware Entry.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu9_smumgr.c

161

pr_err("Failed message: 0x%x, input parameter: 0x%x, error code: 0x%x\n", msg, parameter, ret);

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu9_smumgr.c

72

pr_err("No response from smu\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/smu9_smumgr.c

82

pr_err("No response from smu\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/tonga_smumgr.c

144

pr_err("SMU Firmware start failed\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/tonga_smumgr.c

1539

pr_err("[powerplay] VBIOS did not find boot engine "

drivers/gpu/drm/amd/pm/powerplay/smumgr/tonga_smumgr.c

1551

pr_err("[powerplay] VBIOS did not find boot "

drivers/gpu/drm/amd/pm/powerplay/smumgr/tonga_smumgr.c

1761

pr_err("VDDC and VDDGFX should "

drivers/gpu/drm/amd/pm/powerplay/smumgr/tonga_smumgr.c

1774

pr_err("VDDC should be on "

drivers/gpu/drm/amd/pm/powerplay/smumgr/tonga_smumgr.c

746

pr_err("Pcie Dpm Enablemask is 0 !");

drivers/gpu/drm/amd/pm/powerplay/smumgr/vega10_smumgr.c

199

pr_err("Your firmware(0x%x) doesn't match SMU9_DRIVER_IF_VERSION(0x%x). Please update your firmware!\n",

drivers/gpu/drm/bridge/samsung-dsim.c

2058

pr_err("%pOF: failed to get '%s' property\n", np, propname);

drivers/gpu/drm/bridge/ti-tfp410.c

466

pr_err("%s: registering i2c driver failed: %d",

drivers/gpu/drm/bridge/ti-tfp410.c

474

pr_err("%s: registering platform driver failed: %d",

drivers/gpu/drm/gma500/cdv_intel_lvds.c

196

pr_err("Can't enable LVDS and another encoder on the same pipe\n");

drivers/gpu/drm/gma500/psb_intel_lvds.c

379

pr_err("Can't support LVDS on pipe A\n");

drivers/gpu/drm/gma500/psb_intel_lvds.c

383

pr_err("Must use PIPE A\n");

drivers/gpu/drm/gma500/psb_intel_lvds.c

391

pr_err("Can't enable LVDS and another encoder on the same pipe\n");

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1003

pr_err("node.start(%llx) not aligned to 2M\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1011

pr_err("node.size(%llx) not aligned to 2M\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1019

pr_err("gtt=%#x, expected=%#x, i=%d, single=%s offset=%#x size=%#x\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1091

pr_err("n=%lu ptr[%u]=%u, val=%u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1125

pr_err("base[%u]=%08x, val=%08x\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1177

pr_err("gpu-write failed at offset=%llx\n", offset);

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1183

pr_err("cpu-check failed at offset=%llx\n", offset);

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1434

pr_err("%s write-huge failed with size=%u, i=%d\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1536

pr_err("%s write-huge failed with size=%u pages=%u i=%d, j=%d\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1598

pr_err("LMEM compact write-huge failed\n");

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1920

pr_err("unexpected pages mismatch, should_swap=%s\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1927

pr_err("unexpected residual page-size bits, should_swap=%s\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1982

pr_err("failed to create 48b PPGTT\n");

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

1989

pr_err("PPGTT missing 64K scratch page\n");

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

375

pr_err("unsupported page_sizes.sg=%u, supported=%u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

381

pr_err("unsupported page_sizes.gtt=%u, supported=%u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

387

pr_err("vma->page_sizes.phys(%u) != obj->mm.page_sizes.phys(%u)\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

393

pr_err("vma->page_sizes.sg(%u) != obj->mm.page_sizes.sg(%u)\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

414

pr_err("gtt pages mismatch for LMEM, expected 2M GTT pages, sg(%u), gtt(%u)\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

455

pr_err("obj->base.size=%zu, expected=%u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

474

pr_err("page_sizes.sg=%u, expected=%u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

511

pr_err("%s failed to create memory region\n", __func__);

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

545

pr_err("%s addr misaligned(%pa) page_size=%u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

552

pr_err("%s page_sizes.gtt=%u, expected=%u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

608

pr_err("obj->base.size=%zu, expected=%u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

635

pr_err("page_sizes.gtt=%u, expected %u\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

662

pr_err("page_sizes.gtt=%u, expected %llu\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

756

pr_err("obj->base.size=%zd, expected=%llu\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

815

pr_err("node.start(%llx) not aligned to 2M\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

823

pr_err("node.size(%llx) not aligned to 2M\n",

drivers/gpu/drm/i915/gem/selftests/huge_pages.c

831

pr_err("gtt=%#x, expected=%#x, size=0x%zx, single=%s\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c

445

pr_err("Invalid %s tiling detected at (%d, %d), start_val %x\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c

483

pr_err("Cannot pin src @ %llx\n", src_addr);

drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c

489

pr_err("Cannot pin dst @ %llx\n", dst_addr);

drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c

495

pr_err("cannot pin batch\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_client_blt.c

623

pr_err("Failed to create buffer %d\n", i);

drivers/gpu/drm/i915/gem/selftests/i915_gem_coherency.c

375

pr_err("Failed to set stale value[%ld/%ld] in object using %s, err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_coherency.c

384

pr_err("Failed to set value[%ld/%ld] in object using %s, err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_coherency.c

395

pr_err("Failed to get value[%ld/%ld] in object using %s, err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_coherency.c

401

pr_err("Value[%ld/%ld] mismatch, (overwrite with %s) wrote [%s] %x read [%s] %x (inverse %x), at offset %x\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1074

pr_err("%s: Spinner failed to start!\n", name);

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1145

pr_err("%s: %s read slice count failed with %d%s\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1150

pr_err("%s: %s slice count %d is not %u%s\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1339

pr_err("%s: Failed with %d!\n", name, ret);

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1438

pr_err("Failed to fill dword %lu [%lu/%lu] with gpu (%s) [full-ppgtt? %s], err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

150

pr_err("Switching between %ld contexts timed out\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1504

pr_err("Target offset 0x%08x_%08x overlaps with a node in the mm!\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1756

pr_err("No scratch page!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1764

pr_err("Inconsistent initial state of scratch page!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

1872

pr_err("%s: Read %08x from scratch (offset 0x%08x_%08x), after %lu reads!\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

529

pr_err("%pS: Invalid value at object %d page %ld/%ld, offset %d/%d: found %x expected %x\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

540

pr_err("%pS: Invalid value at object %d page %ld, offset %d: found %x expected %x (uninitialised)\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

603

pr_err("Failed to fill object with cpu, err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

725

pr_err("Failed to fill dword %lu [%lu/%lu] with gpu (%s) [full-ppgtt? %s], err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

859

pr_err("Failed to fill dword %lu [%lu/%lu] with gpu (%s) [full-ppgtt? %s], err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_context.c

95

pr_err("Failed to populated %d contexts\n", nctx);

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

109

pr_err("__i915_gem_object_create_user failed with err=%ld\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

117

pr_err("i915_gem_prime_export failed with err=%ld\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

130

pr_err("i915_gem_prime_import succeeded when it shouldn't have\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

133

pr_err("i915_gem_prime_import failed with the wrong err=%ld\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

208

pr_err("Data mismatch [%d]=%u\n", i, vaddr[i]);

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

236

pr_err("__i915_gem_object_create_user failed with err=%ld\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

244

pr_err("i915_gem_prime_export failed with err=%ld\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

252

pr_err("i915_gem_prime_import failed with err=%ld\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

260

pr_err("i915_gem_prime_import reused gem object!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

268

pr_err("Different objects dma-buf get_pages failed!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

279

pr_err("Exported dma-buf is not in system memory\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

305

pr_err("dmabuf wait for exclusive fence timed out.\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

31

pr_err("i915_gem_prime_export failed with err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

360

pr_err("i915_gem_prime_import failed with err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

367

pr_err("i915_gem_prime_import created a non-i915 object!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

373

pr_err("i915_gem_prime_import is wrong size found %lld, expected %ld\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

382

pr_err("dma_buf_vmap failed\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

391

pr_err("i915_gem_object_pin_map failed with err=%d\n", err);

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

399

pr_err("imported vmap not all set to %x!\n", pattern[i]);

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

409

pr_err("exported vmap not all set to %x!\n", pattern[i]);

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

444

pr_err("dma_buf_vmap failed\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

454

pr_err("i915_gem_prime_import failed with err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

464

pr_err("i915_gem_object_pin_pages failed with err=%d\n", err);

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

494

pr_err("i915_gem_prime_export failed with err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

504

pr_err("dma_buf_vmap failed\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

510

pr_err("Exported object not initialised to zero!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

54

pr_err("i915_gem_prime_export failed with err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

62

pr_err("i915_gem_prime_import failed with err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

70

pr_err("i915_gem_prime_import created a new object!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_dmabuf.c

79

pr_err("Same object dma-buf get_pages failed!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

129

pr_err("Failed to pin vma.\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

144

pr_err("Object failed migration to smem\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

150

pr_err("object still backed by lmem\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

155

pr_err("object not backed by struct page\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

163

pr_err("Object failed migration to lmem\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

169

pr_err("object still backed by struct page\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

174

pr_err("object not backed by lmem\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

262

pr_err("Spinner was terminated by hangcheck.\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

313

pr_err("expected -EIO, got (%d)\n", ret);

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

329

pr_err("gt(%u) not wedged\n", id);

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

334

pr_err("gt(%u) incorrectly wedged\n", id);

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

36

pr_err("Object content mismatch at location %d of %d\n", i, count);

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

468

pr_err("expected -EIO, got (%d)\n", ret);

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

484

pr_err("gt(%u) not wedged\n", id);

drivers/gpu/drm/i915/gem/selftests/i915_gem_migrate.c

489

pr_err("gt(%u) incorrectly wedged\n", id);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1112

pr_err("%s: Unable to read from mmap, offset:%zd\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

112

pr_err("Failed to set tiling mode=%u, stride=%u, err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1121

pr_err("%s: Faulted unmappable memory\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1127

pr_err("%s: Read incorrect value from mmap, offset:%zd, found:%x, expected:%x\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1135

pr_err("%s: Unable to write to mmap, offset:%zd\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1197

pr_err("%s: Did not create a vm_area_struct for the mmap\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

124

pr_err("Failed to flush to GTT write domain; err=%d\n", err);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1258

pr_err("%s region mismatch %s\n", __func__, expected_mr->name);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1276

pr_err("gt(%u) not wedged\n", id);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1289

pr_err("object missing unknown_state\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

133

pr_err("Failed to pin partial view: offset=%lu; err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

144

pr_err("Failed to iomap partial view: offset=%lu; err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1457

pr_err("%s(%s): failed to write into user mmap\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1466

pr_err("%s(%s): access_process_vm() read failed\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1473

pr_err("%s(%s): access_process_vm() write failed\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1482

pr_err("%s(%s): failed to read from user mmap\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1488

pr_err("%s(%s): failed to read/write values, found (%lx, %lx)\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1575

pr_err("%s: Unable to write to mmap\n", obj->mm.region->name);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1618

pr_err("%s(%s, %s): Failed to execute batch\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

163

pr_err("Partial view for %lu [%u] (offset=%llu, size=%u [%llu, row size %u], fence=%d, tiling=%d, stride=%d) misalignment, expected write to page (%lu + %u [0x%lx]) of 0x%x, found 0x%x\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1685

pr_err("missing PTE:%lx\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1698

pr_err("present PTE:%lx; expected to be revoked\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1761

pr_err("%s: was not present\n", obj->mm.region->name);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1774

pr_err("Failed to unbind object!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1783

pr_err("Failed to put-pages object!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

1791

pr_err("%s: was not absent\n", obj->mm.region->name);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

200

pr_err("Failed to set tiling mode=%u, stride=%u, err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

212

pr_err("Failed to flush to GTT write domain; err=%d\n", err);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

230

pr_err("Failed to pin partial view: offset=%lu; err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

241

pr_err("Failed to iomap partial view: offset=%lu; err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

259

pr_err("Partial view for %lu [%u] (offset=%llu, size=%u [%llu, row size %u], fence=%d, tiling=%d, stride=%d) misalignment, expected write to page (%lu + %u [0x%lx]) of 0x%x, found 0x%x\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

345

pr_err("Failed to allocate %u pages (%lu total), err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

482

pr_err("Failed to allocate %u pages (%lu total), err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

701

pr_err("Failed to trim VMA manager, err=%d\n", err);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

711

pr_err("Unable to insert object into single page hole\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

718

pr_err("Unexpectedly succeeded in inserting too large object into single page hole\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

727

pr_err("Unable to create object for reclaimed hole\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

733

pr_err("Unable to insert object into reclaimed hole\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

738

pr_err("Unexpectedly succeeded in inserting object into no holes!\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

758

pr_err("[loop %d] Failed to busy the object\n", loop);

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

828

pr_err("%s: Write via mmap did not land in backing store (GTT)\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

864

pr_err("%s: Write via mmap did not land in backing store (WC)\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

929

pr_err("%s: Did not create a vm_area_struct for the mmap\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

940

pr_err("%s: Unable to read from mmap, offset:%zd\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

947

pr_err("%s: Read incorrect value from mmap, offset:%zd, found:%x, expected:%x\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_mman.c

956

pr_err("%s: Unable to write to mmap, offset:%zd\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c

24

pr_err("i915_gem_object_create failed, err=%d\n", err);

drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c

52

pr_err("Failed to allocate %lu pages (%lu total), err=%d\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_object.c

60

pr_err("Page lookup mismatch at index %lu [%lu]\n",

drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c

24

pr_err("i915_gem_object_create failed, err=%d\n", err);

drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c

32

pr_err("shmem has no struct page\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c

39

pr_err("i915_gem_object_attach_phys failed, err=%d\n", err);

drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c

44

pr_err("i915_gem_object_attach_phys did not create a phys object\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c

50

pr_err("i915_gem_object_attach_phys did not pin its phys pages\n");

drivers/gpu/drm/i915/gem/selftests/i915_gem_phys.c

60

pr_err("i915_gem_object_set_to_gtt_domain failed with err=%d\n",

drivers/gpu/drm/i915/gt/intel_engine_user.c

274

pr_err("UABI engine not found for { class:%d, instance:%d }\n",

drivers/gpu/drm/i915/gt/intel_engine_user.c

282

pr_err("Wrong UABI engine:%s { class:%d, instance:%d } found for { class:%d, instance:%d }\n",

drivers/gpu/drm/i915/gt/intel_engine_user.c

303

pr_err("mismatching default context state for class %d on engine %s\n",

drivers/gpu/drm/i915/gt/intel_lrc.c

1592

pr_err("%s: context submitted with incorrect RING_START [%08x], expected %08x\n",

drivers/gpu/drm/i915/gt/intel_lrc.c

1602

pr_err("%s: context submitted with incorrect RING_CTL [%08x], expected %08x\n",

drivers/gpu/drm/i915/gt/intel_lrc.c

1612

pr_err("%s: context submitted with STOP_RING [%08x] in RING_MI_MODE\n",

drivers/gpu/drm/i915/gt/selftest_context.c

139

pr_err("%s context overwrote trailing red-zone!", engine->name);

drivers/gpu/drm/i915/gt/selftest_context.c

224

pr_err("%s is awake before starting %s!\n",

drivers/gpu/drm/i915/gt/selftest_context.c

253

pr_err("context is not active; expected idle-barrier (%s pass %d)\n",

drivers/gpu/drm/i915/gt/selftest_context.c

260

pr_err("%s is asleep before idle-barrier\n",

drivers/gpu/drm/i915/gt/selftest_context.c

283

pr_err("context is still active!");

drivers/gpu/drm/i915/gt/selftest_context.c

377

pr_err("%s is awake before starting %s!\n",

drivers/gpu/drm/i915/gt/selftest_context.c

406

pr_err("remote context is not active; expected idle-barrier (%s pass %d)\n",

drivers/gpu/drm/i915/gt/selftest_engine_cs.c

403

pr_err("%s(%s, class:%d, instance:%d): mmio base for graphics ver %u is before the one for ver %u\n",

drivers/gpu/drm/i915/gt/selftest_engine_cs.c

415

pr_err("%s(%s, class:%d, instance:%d): invalid mmio base (%x) for graphics ver %u at entry %u\n",

drivers/gpu/drm/i915/gt/selftest_engine_heartbeat.c

205

pr_err("%s: heartbeat not running\n",

drivers/gpu/drm/i915/gt/selftest_engine_heartbeat.c

218

pr_err("%s: heartbeat still running\n",

drivers/gpu/drm/i915/gt/selftest_engine_heartbeat.c

225

pr_err("%s: heartbeat still allocated\n",

drivers/gpu/drm/i915/gt/selftest_engine_pm.c

169

pr_err("%s Mismatch between ring timestamp and walltime!\n",

drivers/gpu/drm/i915/gt/selftest_engine_pm.c

184

pr_err("%s Mismatch between ring and context timestamps!\n",

drivers/gpu/drm/i915/gt/selftest_engine_pm.c

235

pr_err("active wait timed out %lld\n", dt);

drivers/gpu/drm/i915/gt/selftest_engine_pm.c

287

pr_err("%s: reported %lldns [%d%%] busyness while sleeping [for %lldns]\n",

drivers/gpu/drm/i915/gt/selftest_engine_pm.c

326

pr_err("%s: reported %lldns [%d%%] busyness while spinning [for %lldns]\n",

drivers/gpu/drm/i915/gt/selftest_engine_pm.c

361

pr_err("Unable to flush GT pm before test\n");

drivers/gpu/drm/i915/gt/selftest_engine_pm.c

389

pr_err("intel_engine_pm_get_if_awake(%s) failed under %s\n",

drivers/gpu/drm/i915/gt/selftest_engine_pm.c

399

pr_err("%s is still awake after flushing pm\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

102

pr_err("%s: hanging request %llx:%lld did not complete\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1177

pr_err("%s: failed to submit first context\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1195

pr_err("%s: failed to submit second context\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1225

pr_err("%s: rq[%d] timed out\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1236

pr_err("%s: timeslicing did not run context B [%u] before A [%u]!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1350

pr_err("%s: Timed out trying to submit semaphores\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1364

pr_err("%s: Timed out trying to submit nop\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1388

pr_err("%s: Failed to timeslice into queue\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1504

pr_err("%s: I915_PRIORITY_BARRIER request completed, bypassing no-preempt request\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1651

pr_err("%s: Busywaiting request did not!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1683

pr_err("%s: Failed to preempt semaphore busywait!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

1874

pr_err("First context failed to start\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

1888

pr_err("Second context overtook first?\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

1896

pr_err("High priority context failed to preempt the low priority context\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

1996

pr_err("First client failed to start\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2015

pr_err("Second client started too early!\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2022

pr_err("Second client failed to start\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2029

pr_err("Preemption recorded x%d; should have been suppressed!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

2092

pr_err("Cancelled inflight0 request did not reset\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2155

pr_err("Normal inflight0 request did not complete\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2161

pr_err("Cancelled inflight1 request did not report -EIO\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2237

pr_err("Cancelled inflight0 request did not report -EIO\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2249

pr_err("Normal inflight1 request did not complete\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2255

pr_err("Cancelled queued request did not report -EIO\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2303

pr_err("Cancelled inflight0 request did not reset\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2374

pr_err("Cancelled inflight0 request did not reset\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2493

pr_err("First client failed to start\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2516

pr_err("Second client failed to start\n");

drivers/gpu/drm/i915/gt/selftest_execlists.c

2527

pr_err("Preemption on %s recorded x%d, depth %d; should have been suppressed!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

2603

pr_err("Timed out waiting to flush %s\n", engine->name);

drivers/gpu/drm/i915/gt/selftest_execlists.c

2651

pr_err("Failed to preempt over chain of %d\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

2672

pr_err("Failed to flush low priority chain of %d requests\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

2892

pr_err("%s: preemption request was not submitted\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

3027

pr_err("Failed to flush chain of %d requests, at %d\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

3322

pr_err("%s: Failed to release semaphore\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

3338

pr_err("%s: Invalid result, client %d, gpr %d, result: %d\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

3790

pr_err("%s(%s): wait for %llx:%lld timed out\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

3883

pr_err("Failed to wrap engine %s: err=%d\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

3957

pr_err("%s(%s): wait for %llx:%lld timed out\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

3973

pr_err("Executed on wrong sibling '%s', expected '%s'\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

4275

pr_err("Incorrect value[%d] found for GPR[%d]\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

4403

pr_err("%s: on hold request completed!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

4414

pr_err("%s: held request did not complete!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

447

pr_err("%s: preemption request was not submitted\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

647

pr_err("%s: on hold request completed!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

658

pr_err("%s: held request did not complete!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

767

pr_err("%s: first request did not start within time!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

780

pr_err("%s: %s request not started!\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

790

pr_err("%s: %s request (%s) with wrong error code: %d\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

805

pr_err("%s: failed at phase[%zd] { %d, %d }\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

92

pr_err("%s: hanging request %llx:%lld not reset\n",

drivers/gpu/drm/i915/gt/selftest_execlists.c

967

pr_err("%s: Failed to slice along semaphore chain of length (%d, %d)!\n",

drivers/gpu/drm/i915/gt/selftest_gt_pm.c

117

pr_err("%s: CS ticks did not match walltime!\n",

drivers/gpu/drm/i915/gt/selftest_gt_pm.c

124

pr_err("%s: walltime did not match CS ticks!\n",

drivers/gpu/drm/i915/gt/selftest_gt_pm.c

149

pr_err("rc6 still enabled after suspend!\n");

drivers/gpu/drm/i915/gt/selftest_gt_pm.c

160

pr_err("rc6 not enabled upon resume!\n");

drivers/gpu/drm/i915/gt/selftest_gt_pm.c

168

pr_err("llc state not restored upon resume!\n");

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1006

pr_err("i915_reset_engine(%s:%s): failed to idle before reset\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1032

pr_err("[%s] Worker create failed: %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1055

pr_err("[%s] Modify policy failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1063

pr_err("[%s] Create hang request failed: %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1074

pr_err("%s: Failed to start request %llx, at %x\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1090

pr_err("i915_reset_engine(%s:%s): failed, err=%d\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1100

pr_err("[%s] Wait for request %lld:%lld [0x%04X] failed: %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1109

pr_err("i915_reset_engine(%s:%s): failed to reset request %lld:%lld [0x%04X]\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1125

pr_err("i915_reset_engine(%s:%s):"

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1150

pr_err("i915_reset_engine(%s:%s):"

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1163

pr_err("[%s] Restore policy failed: %d!\n", engine->name, err2);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1180

pr_err("i915_reset_engine(%s:%s): reset %lu times, but reported %lu\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1198

pr_err("kthread for other engine %s failed, err=%d\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1211

pr_err("Innocent engine %s was reset (count=%ld)\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1222

pr_err("Global reset (count=%ld)!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1233

pr_err("[%s] Flush failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1317

pr_err("[%s] Hang init failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1324

pr_err("[%s] Create hang request failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1334

pr_err("%s: Failed to start request %llx, at %x\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1348

pr_err("i915_request_wait failed on a stuck request: err=%ld\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1355

pr_err("No GPU reset recorded!\n");

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1404

pr_err("Invalid Y-tiling settings; err:%d\n", err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1410

pr_err("Unable to pin vma for Y-tiled fence; err:%d\n", err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1417

pr_err("Unable to pin Y-tiled fence; err:%d\n", err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1452

pr_err("[%s] Hang init failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1459

pr_err("[%s] Create object failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1466

pr_err("Invalid X-tiling settings; err:%d\n", err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1474

pr_err("[%s] VMA instance failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1481

pr_err("[%s] Create hang request failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1493

pr_err("[%s] VMA pin failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1500

pr_err("Unable to pin X-tiled fence; err:%d\n", err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1509

pr_err("[%s] Move to active failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1523

pr_err("%s: Failed to start request %llx, at %x\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1536

pr_err("[%s] Thread spawn failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1547

pr_err("igt/evict_vma kthread did not wait\n");

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1666

pr_err("[%s] Modify policy failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1674

pr_err("[%s] Create 'prev' hang request failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1689

pr_err("[%s] Create hang request failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1708

pr_err("%s(%s): Failed to idle other inactive engines after device reset\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1721

pr_err("%s(%s): Failed to start request %llx, at %x\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1739

pr_err("GPU reset not recorded on hanging request [fence.error=%d]!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1748

pr_err("Fence error status not zero [%d] after unrelated reset\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1757

pr_err("No GPU reset recorded!\n");

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1781

pr_err("%s:%d> [%s] Restore policy failed: %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1791

pr_err("[%s] Flush failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1829

pr_err("[%s] Hang init failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1836

pr_err("[%s] Create hang request failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1846

pr_err("%s: Failed to start request %llx, at %x\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1864

pr_err("Guilty request not identified!\n");

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1903

pr_err("i915_reset_engine(%s:%s) failed under %s\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1922

pr_err("[%s] Hang init failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1929

pr_err("[%s] Create hang request failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

1939

pr_err("%s(%s): Failed to start request %llx, at %x\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

309

pr_err("Failed to create request for %s, err=%d\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

332

pr_err("Wait for request failed on %s, err=%d\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

370

pr_err("[%s] Create context failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

380

pr_err("[%s] Create request failed: %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

396

pr_err("[%s] GT is wedged!\n", engine->name);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

402

pr_err("[%s] Reset not recorded: %d vs %d + %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

410

pr_err("[%s] Flush failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

417

pr_err("Post flush failed: %d!\n", err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

452

pr_err("[%s] Create context failed: %pe!\n", engine->name, ce);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

467

pr_err("%s failed to idle before reset\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

500

pr_err("intel_engine_reset(%s) failed, err:%d\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

506

pr_err("Full GPU reset recorded! (engine reset expected)\n");

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

513

pr_err("%s engine reset not recorded!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

568

pr_err("[%s] Create context failed: %pe!\n", engine->name, ce);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

588

pr_err("%s failed to idle before reset\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

639

pr_err("intel_engine_reset(%s) did not fail, err:%d\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

716

pr_err("%s failed to idle before reset\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

737

pr_err("[%s] Modify policy failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

745

pr_err("[%s] Create hang request failed: %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

756

pr_err("%s: Failed to start request %llx, at %x\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

770

pr_err("intel_engine_reset(%s) failed, err:%d\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

780

pr_err("[%s] Wait for request %lld:%lld [0x%04X] failed: %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

790

pr_err("Full GPU reset recorded! (engine reset expected)\n");

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

799

pr_err("%s engine reset not recorded!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

811

pr_err("[%s] Restore policy failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

827

pr_err("[%s] Flush failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

833

pr_err("GT is wedged!\n");

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

905

pr_err("[%s] Create context #%ld failed: %d!\n",

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

922

pr_err("[%s] Create request #%d failed: %d!\n", engine->name, idx, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

939

pr_err("[%s] Request put failed: %d!\n", engine->name, err);

drivers/gpu/drm/i915/gt/selftest_hangcheck.c

950

pr_err("[%s] Request put #%ld failed: %d!\n", engine->name, count, err);

drivers/gpu/drm/i915/gt/selftest_llc.c

35

pr_err("Failed to read freq table[%d], range [%d, %d]\n",

drivers/gpu/drm/i915/gt/selftest_llc.c

43

pr_err("Min freq table(%d/[%d, %d]):%dMHz did not match expected CPU freq, found %d, expected %d\n",

drivers/gpu/drm/i915/gt/selftest_llc.c

53

pr_err("Min freq table(%d/[%d, %d]):%dMHz did not match expected ring freq, found %d, expected %d\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1029

pr_err("%s: invalid LRI found in context image\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1188

pr_err("%s: invalid LRI found in context image\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1341

pr_err("%s: invalid LRI found in context image\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1358

pr_err("%s[%d]: Mismatch for register %4x, default %08x, reference %08x, result (%08x, %08x), poison %08x, context %08x\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1476

pr_err("%s(%s): wait for results timed out\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1641

pr_err("ring start mismatch: canary 0x%08x vs state 0x%08x\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1827

pr_err("%s: corrupted context was not reset\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1834

pr_err("%s: corrupted context did not recover\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

1923

pr_err("%s: request not completed!\n", engine->name);

drivers/gpu/drm/i915/gt/selftest_lrc.c

1936

pr_err("%s: pphwsp underflow %u time(s), max %u cycles!\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

210

pr_err("%s: Expected LRI command at dword %d, found %08x\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

217

pr_err("%s: LRI command mismatch at dword %d, expected %08x found %08x\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

243

pr_err("%s: Different registers found at dword %d, expected %x, found %x\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

387

pr_err("%s: Offset for %s [0x%x] mismatch, found %x, expected %x\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

479

pr_err("%s: Stored register[%d] value[0x%x] did not match expected[0x%x]\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

677

pr_err("%s: GPR[%d].%s was not zero, found 0x%08x!\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

830

pr_err("%s(%s): invalid timestamp on restore, context:%x, request:%x\n",

drivers/gpu/drm/i915/gt/selftest_lrc.c

838

pr_err("%s(%s): invalid timestamp on save, request:%x, context:%x\n",

drivers/gpu/drm/i915/gt/selftest_migrate.c

109

pr_err("%ps timed out, size: %u\n", fn, sz);

drivers/gpu/drm/i915/gt/selftest_migrate.c

119

pr_err("%ps failed, size: %u, offset: %zu\n",

drivers/gpu/drm/i915/gt/selftest_migrate.c

307

pr_err("%ps timed out, size: %u\n",

drivers/gpu/drm/i915/gt/selftest_migrate.c

321

pr_err("%ps timed out, size: %u\n", fn, sz);

drivers/gpu/drm/i915/gt/selftest_migrate.c

338

pr_err("%ps failed, (%u != %u), offset: %zu\n",

drivers/gpu/drm/i915/gt/selftest_migrate.c

358

pr_err("%ps timed out, size: %u\n",

drivers/gpu/drm/i915/gt/selftest_migrate.c

380

pr_err("%ps ccs clearing failed, offset: %ld/%d\n",

drivers/gpu/drm/i915/gt/selftest_migrate.c

397

pr_err("%ps failed, size: %u\n", fn, sz);

drivers/gpu/drm/i915/gt/selftest_migrate.c

95

pr_err("%ps failed, size: %u\n", fn, sz);

drivers/gpu/drm/i915/gt/selftest_mocs.c

172

pr_err("%s: Invalid MOCS[%d] entry, found %08x, expected %08x\n",

drivers/gpu/drm/i915/gt/selftest_mocs.c

206

pr_err("%s: Invalid L3CC[%d] entry, found %08x, expected %08x\n",

drivers/gpu/drm/i915/gt/selftest_rc6.c

117

pr_err("Did not enter RC6! RC6_STATE=%08x, RC6_CONTROL=%08x, residency=%lld\n",

drivers/gpu/drm/i915/gt/selftest_rc6.c

131

pr_err("GPU leaked energy while in RC6!\n"

drivers/gpu/drm/i915/gt/selftest_rc6.c

141

pr_err("Did not enter RC6 properly, RC6 start residency=%lluns, RC6 end residency=%lluns\n",

drivers/gpu/drm/i915/gt/selftest_rc6.c

273

pr_err("%s: GPU reset required\n",

drivers/gpu/drm/i915/gt/selftest_rc6.c

83

pr_err("RC6 residency increased by %lldus while disabled for 1000ms!\n",

drivers/gpu/drm/i915/gt/selftest_rc6.c

98

pr_err("No power and freq measured while in RC0\n");

drivers/gpu/drm/i915/gt/selftest_reset.c

167

pr_err("%s reset clobbered unreserved area [above %x] of stolen; may cause severe faults\n",

drivers/gpu/drm/i915/gt/selftest_reset.c

226

pr_err("No GPU reset recorded!\n");

drivers/gpu/drm/i915/gt/selftest_reset.c

290

pr_err("__intel_gt_reset failed under %s\n", p->name);

drivers/gpu/drm/i915/gt/selftest_reset.c

350

pr_err("intel_engine_reset(%s) failed under %s\n",

drivers/gpu/drm/i915/gt/selftest_ring.c

44

pr_err("intel_ring_direction(%u, %u):%d != %d\n",

drivers/gpu/drm/i915/gt/selftest_ring_submission.c

115

pr_err("pass[%d] wa_bb emitted for the kernel context\n",

drivers/gpu/drm/i915/gt/selftest_ring_submission.c

126

pr_err("pass[%d] wa_bb *NOT* emitted after the kernel context\n",

drivers/gpu/drm/i915/gt/selftest_ring_submission.c

137

pr_err("pass[%d] wa_bb *NOT* emitted for the user context switch\n",

drivers/gpu/drm/i915/gt/selftest_ring_submission.c

168

pr_err("wa_bb emitted between the same user context\n");

drivers/gpu/drm/i915/gt/selftest_ring_submission.c

199

pr_err("wa_bb emitted between the same user context [with intervening kernel]\n");

drivers/gpu/drm/i915/gt/selftest_rps.c

1002

pr_err("%s: Frequency unexpectedly changed [down], now %d!\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

1009

pr_err("%s: DOWN interrupt not recorded for idle, pm_iir:%x, prev_down:%x, down_threshold:%x, down_ei:%x [prev_up:%x, up_threshold:%x, up_ei:%x]\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

1046

pr_err("No RPS PM events registered, but RPS is enabled?\n");

drivers/gpu/drm/i915/gt/selftest_rps.c

1189

pr_err("%s: RPS spinner did not start\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

1227

pr_err("%s: did not conserve power when setting lower frequency!\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

1328

pr_err("%s: dynamic reclocking of spinner failed\n!",

drivers/gpu/drm/i915/gt/selftest_rps.c

267

pr_err("%s: RPS spinner did not start\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

339

pr_err("%s: rps clock time does not match walltime!\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

346

pr_err("%s: walltime does not match rps clock ticks!\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

427

pr_err("%s: RPS spinner did not start\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

437

pr_err("%s: could not set minimum frequency [%x], only %x!\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

454

pr_err("%s: could not restore minimum frequency [%x], only %x!\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

672

pr_err("%s: timed loop did not start\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

695

pr_err("%s: CS did not scale with frequency! scaled min:%llu, max:%llu\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

810

pr_err("%s: timed loop did not start\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

833

pr_err("%s: CS did not scale with frequency! scaled min:%llu, max:%llu\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

918

pr_err("%s: RPS spinner did not start\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

926

pr_err("%s: RPS not enabled on starting spinner\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

934

pr_err("%s: RPS did not register UP interrupt\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

941

pr_err("%s: RPS did not program min frequency\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

958

pr_err("%s: Frequency unexpectedly changed [up], now %d!\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

964

pr_err("%s: UP interrupt not recorded for spinner, pm_iir:%x, prev_up:%x, up_threshold:%x, up_ei:%x\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

984

pr_err("%s: RPS did not register DOWN interrupt\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

990

pr_err("%s: RPS did not program max frequency\n",

drivers/gpu/drm/i915/gt/selftest_slpc.c

146

pr_err("SWReq is %d, should be at most %d\n", req_freq,

drivers/gpu/drm/i915/gt/selftest_slpc.c

182

pr_err("SWReq is %d, should be at least %d\n", req_freq,

drivers/gpu/drm/i915/gt/selftest_slpc.c

238

pr_err("%s: did not conserve power when setting lower frequency!\n",

drivers/gpu/drm/i915/gt/selftest_slpc.c

268

pr_err("Pcode did not grant max freq\n");

drivers/gpu/drm/i915/gt/selftest_slpc.c

293

pr_err("Min/Max are fused to the same value\n");

drivers/gpu/drm/i915/gt/selftest_slpc.c

301

pr_err("Could not get SLPC max freq\n");

drivers/gpu/drm/i915/gt/selftest_slpc.c

306

pr_err("Could not get SLPC min freq\n");

drivers/gpu/drm/i915/gt/selftest_slpc.c

316

pr_err("Unable to update min freq!");

drivers/gpu/drm/i915/gt/selftest_slpc.c

32

pr_err("Could not set min frequency to [%u]\n", freq);

drivers/gpu/drm/i915/gt/selftest_slpc.c

325

pr_err("Unable to turn off efficient freq!");

drivers/gpu/drm/i915/gt/selftest_slpc.c

352

pr_err("%s: Spinner did not start\n",

drivers/gpu/drm/i915/gt/selftest_slpc.c

395

pr_err("Actual freq did not rise above min\n");

drivers/gpu/drm/i915/gt/selftest_slpc.c

396

pr_err("Perf Limit Reasons: 0x%x\n",

drivers/gpu/drm/i915/gt/selftest_slpc.c

45

pr_err("Could not set maximum frequency [%u]\n",

drivers/gpu/drm/i915/gt/selftest_slpc.c

528

pr_err("%s GT %d failed ", __func__, gt->info.id);

drivers/gpu/drm/i915/gt/selftest_slpc.c

60

pr_err("Unable to update max freq");

drivers/gpu/drm/i915/gt/selftest_slpc.c

66

pr_err("Unable to update min freq");

drivers/gpu/drm/i915/gt/selftest_slpc.c

79

pr_err("Unable to restore max freq");

drivers/gpu/drm/i915/gt/selftest_slpc.c

85

pr_err("Unable to restore min freq");

drivers/gpu/drm/i915/gt/selftest_slpc.c

91

pr_err("Unable to restore efficient freq");

drivers/gpu/drm/i915/gt/selftest_timeline.c

114

pr_err("HWSP cacheline %lu already used; duplicate allocation!\n",

drivers/gpu/drm/i915/gt/selftest_timeline.c

1226

pr_err("Wait for timeline wrap timed out!\n");

drivers/gpu/drm/i915/gt/selftest_timeline.c

1233

pr_err("Pre-wrap request not completed!\n");

drivers/gpu/drm/i915/gt/selftest_timeline.c

1313

pr_err("Wait for timeline wrap timed out!\n");

drivers/gpu/drm/i915/gt/selftest_timeline.c

1320

pr_err("Pre-wrap request not completed!\n");

drivers/gpu/drm/i915/gt/selftest_timeline.c

1382

pr_err("Wait for timeline writes timed out!\n");

drivers/gpu/drm/i915/gt/selftest_timeline.c

212

pr_err("%s: %s(ctx=%llu, seqno=%u) expected passed %s but failed\n",

drivers/gpu/drm/i915/gt/selftest_timeline.c

345

pr_err("Lookup of %llu failed\n", id);

drivers/gpu/drm/i915/gt/selftest_timeline.c

375

pr_err("Lookup of %lu failed\n", end_time);

drivers/gpu/drm/i915/gt/selftest_timeline.c

497

pr_err("Timeline created with incorrect breadcrumb, found %x, expected %x\n",

drivers/gpu/drm/i915/gt/selftest_timeline.c

520

pr_err("Failed to write to timeline!\n");

drivers/gpu/drm/i915/gt/selftest_timeline.c

747

pr_err("Wait for timeline writes timed out!\n");

drivers/gpu/drm/i915/gt/selftest_timeline.c

754

pr_err("Bad timeline values: found (%x, %x), expected (%x, %x)\n",

drivers/gpu/drm/i915/gt/selftest_timeline.c

915

pr_err("Watcher '%s' found HWSP value %x for seqno %x\n",

drivers/gpu/drm/i915/gt/selftest_tlb.c

150

pr_err("%s(%s): Semaphore sanitycheck failed %llx, with alignment %llx, using PTE size %x (phys %x, sg %x)\n",

drivers/gpu/drm/i915/gt/selftest_tlb.c

174

pr_err("%s: Request did not complete; the COND_BBE did not read the updated PTE\n",

drivers/gpu/drm/i915/gt/selftest_tlb.c

179

pr_err("Spinner ended unexpectedly\n");

drivers/gpu/drm/i915/gt/selftest_tlb.c

71

pr_err("Cannot pin at %llx+%llx\n", addr, va->size);

drivers/gpu/drm/i915/gt/selftest_workarounds.c

1010

pr_err("Whitelist register 0x%4x:%08x was unwritable\n",

drivers/gpu/drm/i915/gt/selftest_workarounds.c

1287

pr_err("%s: Reset failed while idle\n", engine->name);

drivers/gpu/drm/i915/gt/selftest_workarounds.c

1311

pr_err("%s: Spinner failed to start\n", engine->name);

drivers/gpu/drm/i915/gt/selftest_workarounds.c

1325

pr_err("%s: Reset failed on an active spinner\n",

drivers/gpu/drm/i915/gt/selftest_workarounds.c

236

pr_err("Invalid RING_NONPRIV[%d], expected 0x%08x, found 0x%08x\n",

drivers/gpu/drm/i915/gt/selftest_workarounds.c

320

pr_err("Invalid whitelist *before* %s reset!\n", name);

drivers/gpu/drm/i915/gt/selftest_workarounds.c

330

pr_err("%s spinner failed to start\n", name);

drivers/gpu/drm/i915/gt/selftest_workarounds.c

345

pr_err("%s reset failed\n", name);

drivers/gpu/drm/i915/gt/selftest_workarounds.c

351

pr_err("Whitelist not preserved in context across %s reset!\n",

drivers/gpu/drm/i915/gt/selftest_workarounds.c

366

pr_err("Invalid whitelist *after* %s reset in fresh context!\n",

drivers/gpu/drm/i915/gt/selftest_workarounds.c

649

pr_err("%s: Futzing %x timedout; cancelling test\n",

drivers/gpu/drm/i915/gt/selftest_workarounds.c

660

pr_err("%s: Unable to write to whitelisted register %x\n",

drivers/gpu/drm/i915/gt/selftest_workarounds.c

692

pr_err("%s: %d mismatch between values written to whitelisted register [%x], and values read back!\n",

drivers/gpu/drm/i915/gt/selftest_workarounds.c

988

pr_err("Whitelisted register 0x%4x not context saved: A=%08x, B=%08x\n",

drivers/gpu/drm/i915/gt/st_shmem_utils.c

25

pr_err("Incorrect read back from shmemfs: %x != %x\n",

drivers/gpu/drm/i915/gt/st_shmem_utils.c

43

pr_err("Incorrect read back via mmap of last write: %x != %x\n",

drivers/gpu/drm/i915/gvt/cmd_parser.c

1595

pr_err("cmd dump: ");

drivers/gpu/drm/i915/gvt/cmd_parser.c

1598

pr_err("\n%08x ", cmd_val(s, i));

drivers/gpu/drm/i915/gvt/cmd_parser.c

1600

pr_err("%08x ", cmd_val(s, i));

drivers/gpu/drm/i915/gvt/cmd_parser.c

1602

pr_err("\nvgpu%d: aperture 0x%llx - 0x%llx, hidden 0x%llx - 0x%llx\n",

drivers/gpu/drm/i915/gvt/cmd_parser.c

716

pr_err("0x%x ", sub_op_val(cmd, d_info->sub_op[i].hi,

drivers/gpu/drm/i915/gvt/cmd_parser.c

719

pr_err("\n");

drivers/gpu/drm/i915/gvt/debug.h

28

pr_err("gvt: "fmt, ##args)

drivers/gpu/drm/i915/gvt/debug.h

33

pr_err("gvt: "fmt, ##args); \

drivers/gpu/drm/i915/gvt/debug.h

35

pr_err("gvt: vgpu %d: "fmt, vgpu->id, ##args);\

drivers/gpu/drm/i915/gvt/handlers.c

196

pr_err("Detected your guest driver doesn't support GVT-g.\n");

drivers/gpu/drm/i915/gvt/handlers.c

199

pr_err("Graphics resource is not enough for the guest\n");

drivers/gpu/drm/i915/gvt/handlers.c

202

pr_err("GVT Internal error for the guest\n");

drivers/gpu/drm/i915/gvt/handlers.c

207

pr_err("Now vgpu %d will enter failsafe mode.\n", vgpu->id);

drivers/gpu/drm/i915/i915_driver.c

839

pr_err("Failed to enable graphics device: %pe\n", ERR_PTR(ret));

drivers/gpu/drm/i915/i915_gem.h

121

pr_err(__VA_ARGS__); \

drivers/gpu/drm/i915/i915_mitigations.c

84

pr_err("Bad \"%s.mitigations=%s\", '%s' is unknown\n",

drivers/gpu/drm/i915/selftests/i915_active.c

118

pr_err("Failed to track active ref!\n");

drivers/gpu/drm/i915/selftests/i915_active.c

127

pr_err("i915_active retired before submission!\n");

drivers/gpu/drm/i915/selftests/i915_active.c

131

pr_err("i915_active not tracking all requests, found %d, expected %d\n",

drivers/gpu/drm/i915/selftests/i915_active.c

239

pr_err("i915_active not retired after flushing barriers!\n");

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

128

pr_err("i915_gem_evict_something failed on a full GGTT with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

143

pr_err("i915_gem_evict_something failed on a full GGTT with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

180

pr_err("Failed to evict+insert, i915_gem_object_ggtt_pin returned err=%d\n", (int)PTR_ERR_OR_ZERO(vma));

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

212

pr_err("i915_gem_evict_for_node on a full GGTT returned err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

224

pr_err("i915_gem_evict_for_node returned err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

276

pr_err("[0]i915_gem_object_ggtt_pin failed\n");

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

293

pr_err("[1]i915_gem_object_ggtt_pin failed\n");

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

305

pr_err("[0]i915_gem_evict_for_node returned err=%d\n", err);

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

318

pr_err("[1]i915_gem_evict_for_node returned err=%d\n", err);

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

351

pr_err("i915_gem_evict_vm on a full GGTT returned err=%d]\n",

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

365

pr_err("i915_gem_evict_vm on a full GGTT returned err=%d]\n",

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

472

pr_err("Unexpected error from request alloc (on %s): %d\n",

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

503

pr_err("Failed waiting for last request (on %s)",

drivers/gpu/drm/i915/selftests/i915_gem_evict.c

78

pr_err("No objects on the GGTT inactive list!\n");

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1422

pr_err("insert page failed: found %d, expected %d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1581

pr_err("i915_gem_gtt_reserve (pass 1) failed at %llu/%llu with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1590

pr_err("i915_gem_gtt_reserve (pass 1) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1627

pr_err("i915_gem_gtt_reserve (pass 2) failed at %llu/%llu with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1636

pr_err("i915_gem_gtt_reserve (pass 2) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1657

pr_err("i915_vma_unbind failed with err=%d!\n", err);

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1668

pr_err("i915_gem_gtt_reserve (pass 3) failed at %llu/%llu with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1677

pr_err("i915_gem_gtt_reserve (pass 3) placement failed, found (%llx + %llx), expected (%llx + %llx)\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1769

pr_err("Invalid i915_gem_gtt_insert(.size=%llx, .alignment=%llx, .start=%llx, .end=%llx) succeeded (err=%d)\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1810

pr_err("i915_gem_gtt_insert (pass 1) failed at %llu/%llu with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1830

pr_err("VMA was unexpectedly evicted!\n");

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1854

pr_err("i915_vma_unbind failed with err=%d!\n", err);

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1860

pr_err("i915_gem_gtt_insert (pass 2) failed at %llu/%llu with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1868

pr_err("i915_gem_gtt_insert did not return node to its previous location (the only hole), expected address %llx, found %llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

1904

pr_err("i915_gem_gtt_insert (pass 3) failed at %llu/%llu with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

475

pr_err("%s(%s) pin (forward) failed with err=%d on size=%lu pages (prime=%lu), offset=%llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

482

pr_err("%s(%s) (forward) insert failed: vma.node=%llx + %llx [allocated? %d], expected offset %llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

515

pr_err("%s(%s) (forward) moved vma.node=%llx + %llx, expected offset %llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

524

pr_err("%s(%s) (forward) unbind of vma.node=%llx + %llx failed with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

554

pr_err("%s(%s) pin (backward) failed with err=%d on size=%lu pages (prime=%lu), offset=%llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

561

pr_err("%s(%s) (backward) insert failed: vma.node=%llx + %llx [allocated? %d], expected offset %llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

594

pr_err("%s(%s) (backward) moved vma.node=%llx + %llx [allocated? %d], expected offset %llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

603

pr_err("%s(%s) (backward) unbind of vma.node=%llx + %llx failed with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

675

pr_err("%s bind failed at %llx + %llx [hole %llx- %llx] with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

684

pr_err("%s incorrect at %llx + %llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

692

pr_err("%s unbind failed at %llx + %llx with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

757

pr_err("%s failed to pin object at %llx in hole [%llx - %llx], with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

767

pr_err("%s incorrect at %llx + %llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

862

pr_err("%s failed to pin object at %llx + %llx in hole [%llx - %llx], with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

872

pr_err("%s incorrect at %llx + %llx\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

942

pr_err("%s failed to pin object at %llx + %llx in hole [%llx - %llx], with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_gem_gtt.c

949

pr_err("%s incorrect at %llx + %llx\n",

drivers/gpu/drm/i915/selftests/i915_perf.c

276

pr_err("GPU delay [%uus] outside of expected threshold! [%lluus, %lluus]\n",

drivers/gpu/drm/i915/selftests/i915_perf.c

388

pr_err("noa_wait timed out\n");

drivers/gpu/drm/i915/selftests/i915_perf.c

399

pr_err("GPR[%d] lost, found:%08x, expected:%08x!\n",

drivers/gpu/drm/i915/selftests/i915_perf.c

406

pr_err("Scratch page overwritten!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

101

pr_err("request wait (busy query) succeeded (expected timeout before submit!)\n");

drivers/gpu/drm/i915/selftests/i915_request.c

106

pr_err("request wait succeeded (expected timeout before submit!)\n");

drivers/gpu/drm/i915/selftests/i915_request.c

111

pr_err("request completed before submit!!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

118

pr_err("request wait (busy query) succeeded (expected timeout after submit!)\n");

drivers/gpu/drm/i915/selftests/i915_request.c

1221

pr_err("%s: Unable to create batch, err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

123

pr_err("request completed immediately!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

1230

pr_err("%s: Request allocation failed with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

1255

pr_err("%s(%s): request completed too early!\n",

drivers/gpu/drm/i915/selftests/i915_request.c

1267

pr_err("%s: failed to resolve batch, err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

128

pr_err("request wait succeeded (expected timeout!)\n");

drivers/gpu/drm/i915/selftests/i915_request.c

1283

pr_err("%s: error waiting for request on %s, err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

133

pr_err("request wait timed out!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

1351

pr_err("%s: Unable to create batch for %s, err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

1360

pr_err("%s: Request allocation failed for %s with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

1371

pr_err("%s: Request await failed for %s with err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

138

pr_err("request not complete after waiting!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

1401

pr_err("%s(%s): request completed too early!\n",

drivers/gpu/drm/i915/selftests/i915_request.c

1409

pr_err("%s: failed to resolve batch, err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

1418

pr_err("%s: error waiting for request on %s, err=%d\n",

drivers/gpu/drm/i915/selftests/i915_request.c

143

pr_err("request wait timed out when already complete!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

1595

pr_err("Failed to start spinner on %s\n", engine->name);

drivers/gpu/drm/i915/selftests/i915_request.c

168

pr_err("fence wait success before submit (expected timeout)!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

175

pr_err("fence signaled immediately!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

180

pr_err("fence wait success after submit (expected timeout)!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

185

pr_err("fence wait timed out (expected success)!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

190

pr_err("fence unsignaled after waiting!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

195

pr_err("fence wait timed out when complete (expected success)!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

248

pr_err("failed to cancel request (already executed)!\n");

drivers/gpu/drm/i915/selftests/i915_request.c

260

pr_err("timed out waiting for high priority request\n");

drivers/gpu/drm/i915/selftests/i915_request.c

265

pr_err("low priority request already completed\n");

drivers/gpu/drm/i915/selftests/i915_request.c

409

pr_err("waiting for %d/%d fences (last %llx:%lld) on %s timed out!\n",

drivers/gpu/drm/i915/selftests/i915_request.c

426

pr_err("%llu:%llu was not signaled!\n",

drivers/gpu/drm/i915/selftests/i915_request.c

674

pr_err("%s: Failed to cancel inactive request\n", engine->name);

drivers/gpu/drm/i915/selftests/i915_request.c

681

pr_err("%s: fence not cancelled (%u)\n",

drivers/gpu/drm/i915/selftests/i915_request.c

693

pr_err("%s: %s error %d\n", __func__, engine->name, err);

drivers/gpu/drm/i915/selftests/i915_request.c

725

pr_err("Failed to start spinner on %s\n", engine->name);

drivers/gpu/drm/i915/selftests/i915_request.c

735

pr_err("%s: Failed to cancel active request\n", engine->name);

drivers/gpu/drm/i915/selftests/i915_request.c

742

pr_err("%s: fence not cancelled (%u)\n",

drivers/gpu/drm/i915/selftests/i915_request.c

754

pr_err("%s: %s error %d\n", __func__, engine->name, err);

drivers/gpu/drm/i915/selftests/i915_request.c

791

pr_err("%s: fence not cancelled (%u)\n",

drivers/gpu/drm/i915/selftests/i915_request.c

803

pr_err("%s: %s error %d\n", __func__, engine->name, err);

drivers/gpu/drm/i915/selftests/i915_request.c

856

pr_err("Failed to start spinner on %s\n", engine->name);

drivers/gpu/drm/i915/selftests/i915_request.c

873

pr_err("%s: Failed to cancel hung request\n", engine->name);

drivers/gpu/drm/i915/selftests/i915_request.c

880

pr_err("%s: fence not cancelled (%u)\n",

drivers/gpu/drm/i915/selftests/i915_request.c

889

pr_err("%s: Failed to complete nop request\n", engine->name);

drivers/gpu/drm/i915/selftests/i915_request.c

896

pr_err("%s: Nop request errored (%u)\n",

drivers/gpu/drm/i915/selftests/i915_request.c

912

pr_err("%s: %s error %d\n", __func__, engine->name, err);

drivers/gpu/drm/i915/selftests/i915_selftest.c

440

pr_err(DRIVER_NAME "/%s: setup failed for %s\n",

drivers/gpu/drm/i915/selftests/i915_selftest.c

450

pr_err(DRIVER_NAME "/%s: %s failed with error %d\n",

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

110

pr_err("recursive cycle not detected (AA)\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

122

pr_err("single depth cycle not detected (BAB)\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

133

pr_err("invalid cycle detected\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

137

pr_err("single depth cycle not detected (CBC)\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

141

pr_err("cycle not detected (BA, CB, AC)\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

145

pr_err("invalid cycle detected\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

155

pr_err("fence C not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

159

pr_err("fence B not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

163

pr_err("fence A not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

194

pr_err("Incorrectly reported fence A was complete before await\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

206

pr_err("Fence B is not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

211

pr_err("Fence A is not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

249

pr_err("Incorrectly reported fence B was complete before await\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

257

pr_err("Incorrectly reported fence C was complete before await\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

264

pr_err("Fence A completed early\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

270

pr_err("Fence B completed early\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

275

pr_err("Fence A completed early (after signaling B)\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

283

pr_err("Fence C not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

287

pr_err("Fence B not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

291

pr_err("Fence A not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

346

pr_err("Fence A completed early\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

351

pr_err("Fence B completed early\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

357

pr_err("Fence C not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

362

pr_err("Fence B not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

367

pr_err("Fence A not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

427

pr_err("Fence A not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

432

pr_err("Fence B not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

437

pr_err("Fence C not done\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

486

pr_err("Fence[%d] completed early\n", i);

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

493

pr_err("Fence[%d] is not done\n", i);

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

556

pr_err("worker updated value before i915_sw_fence was signaled\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

564

pr_err("worker signaled i915_sw_fence before value was posted\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

587

pr_err("Fence with immediate expiration not signaled\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

597

pr_err("Fence with future expiration (%lu jiffies) already signaled\n", delay);

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

606

pr_err("Fence not signaled after wait\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

610

pr_err("Fence signaled too early, target=%lu, now=%lu\n",

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

695

pr_err("Fences immediately signaled\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

711

pr_err("Fences signaled too early\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

718

pr_err("Timeout fence unsignaled!\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

723

pr_err("No timeout fence signaled!\n");

drivers/gpu/drm/i915/selftests/i915_sw_fence.c

731

pr_err("Fences unsignaled\n");

drivers/gpu/drm/i915/selftests/i915_syncmap.c

105

pr_err("sync not cleared after free\n");

drivers/gpu/drm/i915/selftests/i915_syncmap.c

124

pr_err("%s", buf);

drivers/gpu/drm/i915/selftests/i915_syncmap.c

149

pr_err("%s: not a leaf, height is %d\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

155

pr_err("%s: seqno[%d], found %x, expected %x\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

172

pr_err("Inserting first context=%llx did not return leaf (height=%d, prefix=%llx\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

178

pr_err("Inserting first context=%llx created branches!\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

184

pr_err("First bitmap does not contain a single entry, found %x (count=%d)!\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

194

pr_err("Lookup of first context=%llx/seqno=%x failed!\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

247

pr_err("Inserting context=%llx did not return leaf (height=%d, prefix=%llx\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

253

pr_err("First entry into leaf (context=%llx) does not contain a single entry, found %x (count=%d)!\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

263

pr_err("Lookup of first entry context=%llx/seqno=%x failed!\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

309

pr_err("Parent with no height!\n");

drivers/gpu/drm/i915/selftests/i915_syncmap.c

315

pr_err("Join does not have 2 children: %x (%d)\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

322

pr_err("Leaf misplaced in parent!\n");

drivers/gpu/drm/i915/selftests/i915_syncmap.c

353

pr_err("Inserting context=%llx (order=%d, step=%d) did not return leaf (height=%d, prefix=%llx\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

366

pr_err("1: context %llx (order=%d, step=%d) not found\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

374

pr_err("1: context %llx (order=%d, step=%d) should not exist\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

388

pr_err("2: context %llx (order=%d, step=%d) not found\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

426

pr_err("Inserting context=%llx did not return leaf (height=%d, prefix=%llx\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

433

pr_err("Inserting neighbouring context=0x%llx+%d, did not fit into the same leaf bitmap=%x (%d), expected %lx (%d)\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

476

pr_err("Inserting context=%llx (order=%d, idx=%d) did not return leaf (height=%d, prefix=%llx\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

486

pr_err("Parent (join) of last leaf was not the sync!\n");

drivers/gpu/drm/i915/selftests/i915_syncmap.c

492

pr_err("Join does not have the expected height, found %d, expected %d\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

499

pr_err("Join is not full!, found %x (%d) expected %lx (%d)\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

511

pr_err("Child %d is a not leaf!\n", idx);

drivers/gpu/drm/i915/selftests/i915_syncmap.c

517

pr_err("Child %d is not attached to us!\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

524

pr_err("Child %d holds more than one id, found %x (%d)\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

531

pr_err("Child %d has wrong seqno idx, found %d, expected %d\n",

drivers/gpu/drm/i915/selftests/i915_syncmap.c

585

pr_err("context=%llu, last=%u this=%u did not match expectation (%d)\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

100

pr_err("i915_vma_compare failed to detect the difference!\n");

drivers/gpu/drm/i915/selftests/i915_vma.c

1083

pr_err("%s VMA write test failed, expected 0x%x, found 0x%x\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

129

pr_err("VMA lookup/create failed\n");

drivers/gpu/drm/i915/selftests/i915_vma.c

136

pr_err("Failed to pin VMA\n");

drivers/gpu/drm/i915/selftests/i915_vma.c

335

pr_err("%s to pin single page into GGTT with mode[%d:%s]: size=%llx flags=%llx, err=%d\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

349

pr_err("Failed to unbind single page from GGTT, err=%d\n", err);

drivers/gpu/drm/i915/selftests/i915_vma.c

387

pr_err("Invalid sg table: too short at plane %d, (%d, %d)!\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

396

pr_err("Invalid sg.length, found %d, expected %lu for rotated page (%d, %d) [src index %lu]\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

403

pr_err("Invalid address for rotated page (%d, %d) [src index %lu]\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

417

pr_err("Invalid sg table: too short at plane %d, (%d, %d)!\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

423

pr_err("Invalid sg.length, found %d, expected %u for rotated page (%d, %d)\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

429

pr_err("Invalid address, found %pad, expected 0 for remapped page (%d, %d)\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

44

pr_err("VMA created with wrong VM\n");

drivers/gpu/drm/i915/selftests/i915_vma.c

464

pr_err("Invalid sg table: too short at plane %d, (%d, %d)!\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

477

pr_err("Invalid sg.length, found %d, expected %lu for remapped page (%d, %d) [src index %lu]\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

484

pr_err("Invalid address for remapped page (%d, %d) [src index %lu]\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

49

pr_err("VMA created with wrong size, found %llu, expected %zu\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

498

pr_err("Unexpected sg tail with %d size for remapped page (%d, %d)\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

510

pr_err("Invalid sg table: too short at plane %d, (%d, %d)!\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

516

pr_err("Invalid sg.length, found %u, expected %u for remapped page (%d, %d)\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

523

pr_err("Invalid address, found %pad, expected 0 for remapped page (%d, %d)\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

55

pr_err("VMA created with wrong type [%d]\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

631

pr_err("Failed to pin VMA, err=%d\n", err);

drivers/gpu/drm/i915/selftests/i915_vma.c

639

pr_err("VMA is wrong size, expected %lu, found %llu\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

647

pr_err("VMA is wrong size, expected %lu, found %llu\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

654

pr_err("sg table is wrong sizeo, expected %u, found %u nents\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

661

pr_err("VMA binding too small, expected %llu, found %llu\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

668

pr_err("VMA using unrotated object pages!\n");

drivers/gpu/drm/i915/selftests/i915_vma.c

680

pr_err("Inconsistent %s VMA pages for plane %d: [(%d, %d, %d, %d, %d), (%d, %d, %d, %d, %d)]\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

701

pr_err("Unbinding returned %i\n", err);

drivers/gpu/drm/i915/selftests/i915_vma.c

729

pr_err("Partial scattergather list too long\n");

drivers/gpu/drm/i915/selftests/i915_vma.c

735

pr_err("DMA mismatch for partial page offset %lu\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

755

pr_err("(%s) VMA is wrong size, expected %llu, found %llu\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

761

pr_err("(%s) VMA binding too small, expected %llu, found %llu\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

768

pr_err("(%s) VMA mismatch upon creation!\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

77

pr_err("VMA's vm [%p] does not match request [%p]\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

774

pr_err("(%s) VMA using original object pages!\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

780

pr_err("Not the normal ggtt view! Found %d\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

786

pr_err("VMA not using object pages!\n");

drivers/gpu/drm/i915/selftests/i915_vma.c

83

pr_err("VMA ggtt status [%d] does not match parent [%d]\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

846

pr_err("(%s) Inconsistent partial pinning for (offset=%d, size=%d)\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

853

pr_err("(%s) Inconsistent partial pages for (offset=%d, size=%d)\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

863

pr_err("Unbinding returned %i\n", err);

drivers/gpu/drm/i915/selftests/i915_vma.c

875

pr_err("(%s) All partial vma were not recorded on the obj->vma_list: found %u, expected %u\n",

drivers/gpu/drm/i915/selftests/i915_vma.c

89

pr_err("i915_vma_compare failed with create parameters!\n");

drivers/gpu/drm/i915/selftests/i915_vma.c

893

pr_err("(%s) inconsistent full pin\n", p->name);

drivers/gpu/drm/i915/selftests/i915_vma.c

902

pr_err("Unbinding returned %i\n", err);

drivers/gpu/drm/i915/selftests/i915_vma.c

910

pr_err("(%s) allocated an extra full vma!\n", p->name);

drivers/gpu/drm/i915/selftests/i915_vma.c

95

pr_err("i915_vma_compare failed with itself\n");

drivers/gpu/drm/i915/selftests/igt_flush_test.c

38

pr_err("%pS timed out, cancelling all further testing.\n",

drivers/gpu/drm/i915/selftests/igt_live_test.c

62

pr_err("%s(%s): GPU was reset %d times!\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

1125

pr_err("%s vaddr[%u]=%u, val=%u, size=%u, align=%u, offset=%u\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

1361

pr_err("failed to create memory region\n");

drivers/gpu/drm/i915/selftests/intel_memory_region.c

176

pr_err("failed to create memory region\n");

drivers/gpu/drm/i915/selftests/intel_memory_region.c

196

pr_err("%s failed to reserve range", __func__);

drivers/gpu/drm/i915/selftests/intel_memory_region.c

224

pr_err("%s mismatch between allocation and free space", __func__);

drivers/gpu/drm/i915/selftests/intel_memory_region.c

258

pr_err("%s min object spans disjoint sg entries\n", __func__);

drivers/gpu/drm/i915/selftests/intel_memory_region.c

271

pr_err("%s max object spans disjoint sg entries\n", __func__);

drivers/gpu/drm/i915/selftests/intel_memory_region.c

290

pr_err("%s obj->base.size(%zx) != target(%llx)\n", __func__,

drivers/gpu/drm/i915/selftests/intel_memory_region.c

297

pr_err("%s object spans disjoint sg entries\n", __func__);

drivers/gpu/drm/i915/selftests/intel_memory_region.c

353

pr_err("%s target allocation(%llx) mismatch\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

400

pr_err("%s size mismatch(%llu != %llu)\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

408

pr_err("%s order mismatch(%u != %u)\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

419

pr_err("%s too large contiguous allocation was not rejected\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

427

pr_err("%s largest possible contiguous allocation failed\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

494

pr_err("%s: Failed to create a huge contiguous block [> %u], largest block %lld\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

504

pr_err("%s: Created an oversized scatterlist entry, %u > %u\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

511

pr_err("%s: Created an unaligned scatterlist entry, addr=%pa, ps=%u\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

592

pr_err("%s TOPDOWN failed with rem=%llx, size=%llx\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

615

pr_err("%s allocation unexpectedly failed\n", __func__);

drivers/gpu/drm/i915/selftests/intel_memory_region.c

630

pr_err("%s MAPPABLE failed with rem=%llx, size=%llx\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

637

pr_err("%s allocation is not mappable(size=%llx)\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

651

pr_err("%s allocation unexpectedly succeeded\n", __func__);

drivers/gpu/drm/i915/selftests/intel_memory_region.c

692

pr_err("base[%u]=%08x, val=%08x\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

826

pr_err("%s size(%zu) != ps(%u)\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

845

pr_err("%s daddr(%pa) not aligned with ps(%u)\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

912

pr_err("%s failed with size=%u, flags=%u\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

93

pr_err("%s failed, space still left in region\n",

drivers/gpu/drm/i915/selftests/intel_memory_region.c

981

pr_err("igt_gpu_write failed(%d)\n", err);

drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c

27

pr_err("No valid engine found!\n");

drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c

63

pr_err("Invalid scheduler policy modification type: %d!\n", modify_type);

drivers/gpu/drm/i915/selftests/intel_uncore.c

228

pr_err("fw_domain %s still active, aborting test!\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

248

pr_err("Failed to clear fw_domain %s\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

255

pr_err("%s:%s was zero while fw was held!\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

263

pr_err("%s:%s=%0x, fw_domains 0x%x still up after 100ms!\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

326

pr_err("Unclaimed mmio read to register 0x%04x\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

39

pr_err("%s: entry[%d]:(%x, %x) is not watertight to previous (%x)\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

46

pr_err("%s: entry[%d]:(%x, %x) is less than the previous (%x)\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

53

pr_err("%s: entry[%d]:(%x, %x) has negative length\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

85

pr_err("%s: range[%d]:(%06x-%06x) has end before start\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

91

pr_err("%s: range[%d]:(%06x-%06x) is before end of previous (%06x)\n",

drivers/gpu/drm/i915/selftests/intel_uncore.c

97

pr_err("%s: range[%d]:(%06x-%06x) has non-dword-aligned start\n",

drivers/gpu/drm/i915/selftests/mock_gem_device.c

172

pr_err("Failed to allocate mock GEM device: err=%ld\n", PTR_ERR(i915));

drivers/gpu/drm/i915/selftests/scatterlist.c

104

pr_err("%s: %s finished on wrong pfn, expected %lu, found %lu\n",

drivers/gpu/drm/i915/selftests/scatterlist.c

123

pr_err("%s: %s left pages out of order, expected pfn %lu, found pfn %lu (using for_each_sgt_page)\n",

drivers/gpu/drm/i915/selftests/scatterlist.c

134

pr_err("%s: %s finished on wrong pfn, expected %lu, found %lu\n",

drivers/gpu/drm/i915/selftests/scatterlist.c

351

pr_err("i915_sg_trim failed (nents %u, orig_nents %u), expected %lu\n",

drivers/gpu/drm/i915/selftests/scatterlist.c

56

pr_err("%s: %s left pages out of order, expected pfn %lu, found pfn %lu (using for_each_sg)\n",

drivers/gpu/drm/i915/selftests/scatterlist.c

62

pr_err("%s: %s copied wrong sg length, expected size %lu, found %u (using for_each_sg)\n",

drivers/gpu/drm/i915/selftests/scatterlist.c

73

pr_err("%s: %s finished on wrong pfn, expected %lu, found %lu\n",

drivers/gpu/drm/i915/selftests/scatterlist.c

93

pr_err("%s: %s left pages out of order, expected pfn %lu, found pfn %lu (using for_each_sg_page)\n",

drivers/gpu/drm/meson/meson_vclk.c

1079

pr_err("Fatal Error, invalid HDMI-TX freq %lluHz\n",

drivers/gpu/drm/meson/meson_vclk.c

1087

pr_err("Fatal Error, invalid HDMI venc freq %lluHz\n",

drivers/gpu/drm/meson/meson_vclk.c

1120

pr_err("Fatal Error, invalid HDMI vclk freq %lluHz\n",

drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c

458

pr_err("hw recovery is not complete for ctl:%d\n", ctx->idx);

drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c

652

pr_err("unknown interface type %d\n", cfg->intf_mode_sel);

drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c

403

pr_err("invalid IRQ=[%d, %d]\n",

drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c

459

pr_err("invalid IRQ=[%d, %d]\n",

drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c

553

pr_err("invalid IRQ=[%d, %d]\n", DPU_IRQ_REG(irq_idx), DPU_IRQ_BIT(irq_idx));

drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h

43

#define DPU_ERROR(fmt, ...) pr_err("[dpu error]" fmt, ##__VA_ARGS__)

drivers/gpu/drm/msm/dp/dp_display.c

232

pr_err("event_q is full: pndx=%d gndx=%d\n",

drivers/gpu/drm/msm/dp/dp_display.c

815

pr_err("failed to initialize audio, rc = %d\n", rc);

drivers/gpu/drm/msm/dsi/dsi_host.c

1017

pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

1316

pr_err("%s: create packet failed, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

1322

pr_err("%s: packet size is too big\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

1329

pr_err("%s: get vaddr failed, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

1369

pr_err("%s: read data does not match with rx_buf len %zu\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

1387

pr_err("%s: read data does not match with rx_buf len %zu\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

1431

pr_err("%s: failed to get iova: %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

1514

pr_err("%s: failed to add cmd type = 0x%x\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

1530

pr_err("%s: cmd cannot fit into BLLP period, len=%d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

1537

pr_err("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d, ret=%d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

1541

pr_err("%s: cmd dma tx failed, type=0x%x, data0=0x%x, ret=%d len=%d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

2081

pr_err("%s: alloc tx gem obj failed, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

2221

pr_err("%s: Set max pkt size failed, %d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

2238

pr_err("%s: Read cmd Tx failed, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

2241

pr_err("%s: Read cmd Tx failed, too short: %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

2295

pr_err("%s: rx ACK_ERR_PACLAGE\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

2362

pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

2465

pr_err("%s:Failed to enable vregs.ret=%d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

2475

pr_err("%s: failed to enable link clocks. ret=%d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

2482

pr_err("%s: failed to set pinctrl default state, %d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

2551

pr_err("%s: cannot duplicate mode\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

257

pr_err("%s: can't find src clock. ret=%d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

2570

pr_err("DSI: pic_width %d has to be multiple of slice %d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

2576

pr_err("DSI: pic_height %d has to be multiple of slice %d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

274

pr_err("%s: can't find byte_intf clock. ret=%d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

392

pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

398

pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

405

pr_err("%s: Failed to set rate byte intf clk, %d\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

440

pr_err("%s: Failed to enable dsi esc clk\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

446

pr_err("%s: Failed to enable dsi byte clk\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

452

pr_err("%s: Failed to enable dsi pixel clk\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

458

pr_err("%s: Failed to enable byte intf clk\n",

drivers/gpu/drm/msm/dsi/dsi_host.c

485

pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

491

pr_err("%s: Failed to set rate esc clk, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

497

pr_err("%s: Failed to set rate src clk, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

503

pr_err("%s: Failed to set rate pixel clk, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_host.c

516

pr_err("%s: Failed to enable dsi byte clk\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

522

pr_err("%s: Failed to enable dsi esc clk\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

528

pr_err("%s: Failed to enable dsi src clk\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

534

pr_err("%s: Failed to enable dsi pixel clk\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

647

pr_err("%s: forcing mdss_dsi lanes to 1\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_host.c

673

pr_err("%s: mode not set\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_manager.c

229

pr_err("%s: power on host %d failed, %d\n", __func__, id, ret);

drivers/gpu/drm/msm/dsi/dsi_manager.c

237

pr_err("%s: power on host1 failed, %d\n",

drivers/gpu/drm/msm/dsi/dsi_manager.c

301

pr_err("%s: enable host %d failed, %d\n", __func__, id, ret);

drivers/gpu/drm/msm/dsi/dsi_manager.c

308

pr_err("%s: enable host1 failed, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_manager.c

355

pr_err("%s: host %d disable failed, %d\n", __func__, id, ret);

drivers/gpu/drm/msm/dsi/dsi_manager.c

360

pr_err("%s: host1 disable failed, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_manager.c

372

pr_err("%s: host %d power off failed,%d\n", __func__, id, ret);

drivers/gpu/drm/msm/dsi/dsi_manager.c

377

pr_err("%s: host1 power off failed, %d\n",

drivers/gpu/drm/msm/dsi/dsi_manager.c

518

pr_err("%s: failed to prepare non-trigger host, %d\n",

drivers/gpu/drm/msm/dsi/dsi_manager.c

525

pr_err("%s: failed to prepare host, %d\n", __func__, ret);

drivers/gpu/drm/msm/dsi/dsi_manager.c

565

pr_err("%s: invalid id %d\n", __func__, id);

drivers/gpu/drm/msm/dsi/dsi_manager.c

570

pr_err("%s: dsi%d already registered\n", __func__, id);

drivers/gpu/drm/msm/dsi/dsi_manager.c

578

pr_err("%s: failed to parse OF DSI info\n", __func__);

drivers/gpu/drm/msm/dsi/dsi_manager.c

584

pr_err("%s: failed to register mipi dsi host for DSI %d: %d\n",

drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c

818

pr_err("Ref gen not ready. Aborting\n");

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

1000

pr_err("Ref gen not ready. Aborting\n");

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

392

pr_err("DSI PLL(%d) lock failed, status=0x%08x\n",

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

512

pr_err("PLL(%d) lock failed\n", pll_7nm->phy->id);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1013

pr_err("%s: Read %s failed\n", __func__, rd->name);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1038

pr_err("%s: KSV FIFO read failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1081

pr_err("%s: Recv ksv fifo timedout", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1092

pr_err("%s: transfer V failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1099

pr_err("%s: fail to reset sha engine\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1196

pr_err("%s: Write KSV fifo timedout", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1222

pr_err("%s: HDCP V Match timedout", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1242

pr_err("%s: auth prepare failed %d\n", __func__, rc);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1249

pr_err("%s: key exchange failed %d\n", __func__, rc);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1255

pr_err("%s: receive r0 failed %d\n", __func__, rc);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1261

pr_err("%s: verify r0 failed %d\n", __func__, rc);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1271

pr_err("%s: wait ksv fifo ready failed %d\n", __func__, rc);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1277

pr_err("%s: recv ksv fifo failed %d\n", __func__, rc);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1283

pr_err("%s: write ksv fifo failed %d\n", __func__, rc);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1289

pr_err("%s: check v match failed %d\n", __func__, rc);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1297

pr_err("%s: hdcp authentication failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

132

pr_err("%s: write size too big\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

1398

pr_err("%s: HDCP is not supported without qfprom\n",

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

180

pr_err("%s: error: scm_call ret=%d resp=%u\n",

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

269

pr_err("%s: AKSV QFPROM doesn't have 20 1's, 20 0's\n",

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

271

pr_err("%s: QFPROM AKSV chk failed (AKSV=%02x%08x)\n",

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

466

pr_err("%s: ASKV validation failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

611

pr_err("%s: Wait key state timedout", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

633

pr_err("%s: Wait An timedout", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

673

pr_err("%s:An write failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

681

pr_err("%s:AKSV write failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

699

pr_err("%s:BKSV read failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

711

pr_err(": BKSV doesn't have 20 1's and 20 0's\n");

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

712

pr_err(": BKSV chk fail. BKSV=%02x%02x%02x%02x%02x\n",

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

736

pr_err("%s:BCAPS read failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

761

pr_err("%s: wait key and an ready failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

768

pr_err("%s: read bcaps error, abort\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

781

pr_err("%s:An/Aksv write failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

788

pr_err("%s:BKSV Process failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

823

pr_err("%s:R0' read failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

845

pr_err("%s: Wait Auth IRQ timeout\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

851

pr_err("%s: Authentication Part I failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

876

pr_err("%s: BSTATUS read failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

893

pr_err("%s: No downstream devices\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

904

pr_err("%s: no. of devs connected exceeds max allowed",

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

916

pr_err("%s: no. of cascade conn exceeds max allowed",

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

949

pr_err("%s: BCAPS read failed\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

958

pr_err("%s: Wait KSV fifo ready timedout", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

969

pr_err("%s: bstatus error\n", __func__);

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

978

pr_err("%s: BSTATUS write failed\n", __func__);

drivers/gpu/drm/msm/msm_gem_vma.c

212

pr_err("vm-log:\n");

drivers/gpu/drm/msm/msm_gem_vma.c

216

pr_err(" - %s:%d: 0x%016llx-0x%016llx\n",

drivers/gpu/drm/nouveau/nouveau_vga.c

44

pr_err("VGA switcheroo: switched nouveau on\n");

drivers/gpu/drm/nouveau/nouveau_vga.c

49

pr_err("VGA switcheroo: switched nouveau off\n");

drivers/gpu/drm/nouveau/nvkm/core/mm.c

34

pr_err("nvkm: %s\n", header);

drivers/gpu/drm/nouveau/nvkm/core/mm.c

35

pr_err("nvkm: node list:\n");

drivers/gpu/drm/nouveau/nvkm/core/mm.c

37

pr_err("nvkm: \t%08x %08x %d\n",

drivers/gpu/drm/nouveau/nvkm/core/mm.c

40

pr_err("nvkm: free list:\n");

drivers/gpu/drm/nouveau/nvkm/core/mm.c

42

pr_err("nvkm: \t%08x %08x %d\n",

drivers/gpu/drm/omapdrm/dss/dss.h

40

pr_err("omapdss " DSS_SUBSYS_NAME " error: " format, ##__VA_ARGS__)

drivers/gpu/drm/omapdrm/dss/dss.h

43

pr_err("omapdss error: " format, ##__VA_ARGS__)

drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c

182

pr_err("cec-%s: could not clear TX FIFO\n", adap->name);

drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c

189

pr_err("cec-%s: could not clear RX FIFO\n", adap->name);

drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c

275

pr_err("cec-%s: could not clear TX FIFO for transmit\n",

drivers/gpu/drm/panthor/panthor_drv.c

1818

pr_err("panthor: Failed to allocate the workqueues");

drivers/gpu/drm/qxl/qxl_drv.c

88

pr_err("Unable to init drm dev");

drivers/gpu/drm/qxl/qxl_kms.c

128

pr_err("Unable to create vram_mapping");

drivers/gpu/drm/qxl/qxl_kms.c

150

pr_err("Unable to create surface_mapping");

drivers/gpu/drm/qxl/qxl_kms.c

169

pr_err("Unable to ioremap ROM\n");

drivers/gpu/drm/radeon/cik.c

2062

pr_err("cik_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2070

pr_err("cik_fw: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2086

pr_err("cik_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2093

pr_err("cik_fw: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2109

pr_err("cik_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2116

pr_err("cik_fw: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2132

pr_err("cik_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2139

pr_err("cik_fw: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2170

pr_err("cik_rlc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2177

pr_err("cik_fw: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2193

pr_err("cik_sdma: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2200

pr_err("cik_fw: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2223

pr_err("cik_mc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2231

pr_err("cik_fw: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2248

pr_err("smc: error loading firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2254

pr_err("cik_smc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2261

pr_err("cik_fw: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/cik.c

2273

pr_err("ci_fw: mixing new and old firmware!\n");

drivers/gpu/drm/radeon/cik.c

2282

pr_err("cik_cp: Failed to load firmware \"%s\"\n",

drivers/gpu/drm/radeon/evergreen_cs.c

1065

pr_err("Forbidden register 0x%04X in cs at %d\n", reg, idx);

drivers/gpu/drm/radeon/ni.c

754

pr_err("ni_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/ni.c

765

pr_err("ni_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/ni.c

775

pr_err("ni_rlc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/ni.c

787

pr_err("ni_mc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/ni.c

797

pr_err("smc: error loading firmware \"%s\"\n", fw_name);

drivers/gpu/drm/radeon/ni.c

802

pr_err("ni_mc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/ni.c

811

pr_err("ni_cp: Failed to load firmware \"%s\"\n",

drivers/gpu/drm/radeon/r100.c

1082

pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name);

drivers/gpu/drm/radeon/r100.c

1084

pr_err("radeon_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/r100.c

1915

pr_err("Forbidden register 0x%04X in cs at %d\n", reg, idx);

drivers/gpu/drm/radeon/r200.c

540

pr_err("Forbidden register 0x%04X in cs at %d\n", reg, idx);

drivers/gpu/drm/radeon/r300.c

1168

pr_err("Forbidden register 0x%04X in cs at %d (val=%08x)\n",

drivers/gpu/drm/radeon/r600.c

2558

pr_err("r600_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/r600.c

2569

pr_err("r600_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/r600.c

2580

pr_err("r600_rlc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/r600.c

2590

pr_err("smc: error loading firmware \"%s\"\n", fw_name);

drivers/gpu/drm/radeon/r600.c

2595

pr_err("smc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/r600.c

2604

pr_err("r600_cp: Failed to load firmware \"%s\"\n",

drivers/gpu/drm/radeon/r600_cs.c

937

pr_err("Forbidden register 0x%04X in cs at %d\n", reg, idx);

drivers/gpu/drm/radeon/radeon_atpx_handler.c

122

pr_err("failed to evaluate ATPX got %s\n",

drivers/gpu/drm/radeon/radeon_atpx_handler.c

178

pr_err("ATPX buffer is too small: %zu\n", size);

drivers/gpu/drm/radeon/radeon_atpx_handler.c

246

pr_err("ATPX buffer is too small: %zu\n", size);

drivers/gpu/drm/radeon/radeon_fbdev.c

84

pr_err("failed to allocate framebuffer (%d)\n", aligned_size);

drivers/gpu/drm/radeon/radeon_gem.c

170

pr_err("Failed to wait for object: %li\n", r);

drivers/gpu/drm/radeon/si.c

1769

pr_err("si_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1777

pr_err("si_cp: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1793

pr_err("si_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1800

pr_err("si_cp: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1816

pr_err("si_cp: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1823

pr_err("si_cp: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1839

pr_err("si_rlc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1846

pr_err("si_cp: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1870

pr_err("si_mc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1878

pr_err("si_cp: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1897

pr_err("smc: error loading firmware \"%s\"\n", fw_name);

drivers/gpu/drm/radeon/si.c

1902

pr_err("si_smc: Bogus length %zu in firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1909

pr_err("si_cp: validation failed for firmware \"%s\"\n",

drivers/gpu/drm/radeon/si.c

1920

pr_err("si_fw: mixing new and old firmware!\n");

drivers/gpu/drm/radeon/si.c

1928

pr_err("si_cp: Failed to load firmware \"%s\"\n",

drivers/gpu/drm/scheduler/sched_main.c

815

pr_err("*ERROR* %s: credits cannot be 0!\n", __func__);

drivers/gpu/drm/tegra/hub.c

146

pr_err("failed to assert reset for window group %u\n",

drivers/gpu/drm/tilcdc/tilcdc_panel.c

265

pr_err("%s: no devicenode given\n", __func__);

drivers/gpu/drm/tilcdc/tilcdc_panel.c

271

pr_err("%s: could not find panel-info node\n", __func__);

drivers/gpu/drm/tilcdc/tilcdc_panel.c

294

pr_err("%s: error reading panel-info properties\n", __func__);

drivers/gpu/drm/ttm/ttm_agp_backend.c

82

pr_err("AGP Bind memory failed\n");

drivers/gpu/drm/ttm/ttm_bo.c

389

pr_err("Failed to find memory space for buffer 0x%p eviction\n",

drivers/gpu/drm/ttm/ttm_bo.c

407

pr_err("Buffer eviction failed\n");

drivers/gpu/drm/ttm/ttm_tt.c

176

pr_err("Failed allocating page table\n");

drivers/gpu/drm/ttm/ttm_tt.c

219

pr_err("Failed allocating page table\n");

drivers/gpu/drm/ttm/ttm_tt.c

334

pr_err("Failed allocating swap storage\n");

drivers/gpu/drm/ttm/ttm_tt.c

90

pr_err("Illegal buffer object type\n");

drivers/gpu/drm/vc4/vc4_validate.c

70

pr_err("unknown cpp: %d\n", cpp);

drivers/gpu/drm/vc4/vc4_validate.c

87

pr_err("unknown cpp: %d\n", cpp);

drivers/gpu/drm/vkms/vkms_formats.c

755

pr_err("Pixel format %p4cc is not supported by VKMS planes. This is a kernel bug, atomic check must forbid this configuration.\n",

drivers/gpu/drm/vkms/vkms_formats.c

967

pr_err("Pixel format %p4cc is not supported by VKMS writeback. This is a kernel bug, atomic check must forbid this configuration.\n",

drivers/gpu/drm/vmwgfx/vmwgfx_fence.c

408

pr_err("Invalid fence object handle 0x%08lx.\n",

drivers/gpu/drm/vmwgfx/vmwgfx_fence.c

414

pr_err("Invalid fence object handle 0x%08lx.\n",

drivers/gpu/host1x/context_bus.c

20

pr_err("bus type registration failed: %d\n", err);

drivers/gpu/host1x/job.c

307

pr_err("Could not map cmdbuf for relocation\n");

drivers/gpu/vga/vga_switcheroo.c

767

pr_err("client %x refused switch\n", client->id);

drivers/gpu/vga/vga_switcheroo.c

878

pr_err("switching failed stage 1 %d\n", ret);

drivers/gpu/vga/vga_switcheroo.c

882

pr_err("switching failed stage 2 %d\n", ret);

drivers/gpu/vga/vga_switcheroo.c

891

pr_err("delayed switching stage 1 failed %d\n", ret);

drivers/gpu/vga/vga_switcheroo.c

955

pr_err("delayed switching failed stage 2 %d\n", ret);

drivers/greybus/core.c

339

pr_err("bus_register failed (%d)\n", retval);

drivers/greybus/core.c

345

pr_err("gb_hd_init failed (%d)\n", retval);

drivers/greybus/core.c

351

pr_err("gb_operation_init failed (%d)\n", retval);

drivers/greybus/svc_watchdog.c

58

pr_err("svc_watchdog: calling \"%s %s\" to reset greybus network!\n",

drivers/hid/amd-sfh-hid/amd_sfh_client.c

101

pr_err("AMDSFH: Invalid report size\n");

drivers/hid/amd-sfh-hid/amd_sfh_client.c

110

pr_err("AMDSFH: Invalid report size\n");

drivers/hid/hid-asus.c

688

pr_err("Failed to parse MCU version: %d\n", ret);

drivers/hid/hid-core.c

3134

pr_err("can't register hid bus\n");

drivers/hid/hid-debug.c

2896

pr_err("error allocating HID debug buffer\n");

drivers/hid/hid-hyperv.c

301

pr_err("unsupported hid msg type - type %d len %d\n",

drivers/hid/hid-hyperv.c

323

pr_err("Unhandled packet type %d, tid %llx len %d\n",

drivers/hid/hid-hyperv.c

367

pr_err("synthhid protocol request failed (version %d)\n",

drivers/hid/hid-prodikeys.c

31

pr_err("hid-prodikeys: " format "\n" , ## arg)

drivers/hid/usbhid/hid-pidff.c

1191

pr_err("logical_minimum is not 1 as it should be\n");

drivers/hid/usbhid/hid-pidff.c

292

pr_err("invalid effect type\n");

drivers/hid/usbhid/usbkbd.c

181

pr_err("usb_submit_urb(leds) failed\n");

drivers/hsi/clients/hsi_char.c

762

pr_err("Invalid max read/write data size\n");

drivers/hsi/clients/hsi_char.c

768

pr_err("Error while registering HSI/SSI driver %d\n", ret);

drivers/hsi/hsi_core.c

103

pr_err("hsi: failed to register client: %s\n", info->name);

drivers/hsi/hsi_core.c

297

pr_err("hsi: failed to register client: %s\n", name);

drivers/hsi/hsi_core.c

309

pr_err("hsi client: missing or incorrect of property: err=%d\n", err);

drivers/hte/hte.c

523

pr_err("can't parse \"timestamp-names\" property\n");

drivers/hte/hte.c

537

pr_err("%s(): can't parse \"timestamps\" property\n",

drivers/hte/hte.c

583

pr_err("%s() no hte dev found\n", __func__);

drivers/hte/hte.c

591

pr_err("%s(): requested id does not have provider\n",

drivers/hv/channel.c

532

pr_err("Failed to establish GPADL: err = 0x%x\n",

drivers/hv/channel.c

960

pr_err("Close failed: close post msg return is %d\n", ret);

drivers/hv/channel.c

971

pr_err("Close failed: teardown gpadl return %d\n", ret);

drivers/hv/channel_mgmt.c

1041

pr_err("Invalid offer relid=%d: the ring buffer isn't encrypted\n",

drivers/hv/channel_mgmt.c

1047

pr_err("Invalid offer relid=%d: no support for confidential VMBus\n",

drivers/hv/channel_mgmt.c

1129

pr_err("Unable to allocate channel object\n");

drivers/hv/channel_mgmt.c

1633

pr_err("Unable to request offers - %d\n", ret);

drivers/hv/channel_mgmt.c

555

pr_err("unable to add child device object (relid %d)\n",

drivers/hv/channel_mgmt.c

883

pr_err("Continuing even though VMBus UNLOAD did not complete\n");

drivers/hv/connection.c

306

pr_err("Invalid VMBus version %d.%d (expected >= %d.%d) from the host supporting isolation\n",

drivers/hv/connection.c

327

pr_err("Unable to connect to host\n");

drivers/hv/connection.c

485

pr_err("hv_post_msg() failed; error code:%d\n", ret);

drivers/hv/hv.c

139

pr_err("allocation failed for %s page, error %d, decrypted %d\n",

drivers/hv/hv.c

160

pr_err("deallocation failed for %s page, error %d, encrypt %d\n",

drivers/hv/hv.c

188

pr_err("Unable to allocate NUMA map\n");

drivers/hv/hv.c

295

pr_err("Fail to map synic message page.\n");

drivers/hv/hv.c

314

pr_err("Fail to map synic event page.\n");

drivers/hv/hv_balloon.c

1031

pr_err("Memory hot add failed\n");

drivers/hv/hv_balloon.c

1329

pr_err("Balloon response failed\n");

drivers/hv/hv_balloon.c

1395

pr_err("Multiple failures in cold memory discard hypercall, disabling page reporting\n");

drivers/hv/hv_balloon.c

1470

pr_err("Capabilities not accepted by host\n");

drivers/hv/hv_balloon.c

1631

pr_err("Cold memory discard hypercall failed with status %llx\n",

drivers/hv/hv_balloon.c

1637

pr_err("Underlying Hyper-V does not support order less than 9. Hypercall failed\n");

drivers/hv/hv_balloon.c

1638

pr_err("Defaulting to page_reporting_order %d\n",

drivers/hv/hv_balloon.c

1670

pr_err("Failed to enable cold memory discard: %d\n", ret);

drivers/hv/hv_balloon.c

733

pr_err("hot_add memory failed error is %d\n", ret);

drivers/hv/hv_common.c

248

pr_err("Hyper-V: panic message page memory allocation failed\n");

drivers/hv/hv_common.c

254

pr_err("Hyper-V: kmsg dump register error 0x%x\n", ret);

drivers/hv/hv_common.c

280

pr_err("Hyper-V: failed to get partition ID: %#x\n",

drivers/hv/hv_common.c

306

pr_err("Failed to get VTL(error: %lld) exiting...\n", ret);

drivers/hv/hv_common.c

352

pr_err("Hyper-V: sysctl table register error");

drivers/hv/hv_common.c

609

pr_err("Hyper-V: Extended query capabilities hypercall failed 0x%llx\n",

drivers/hv/hv_util.c

770

pr_err("cannot register PTP clock: %d\n",

drivers/hv/mshv_common.c

163

pr_err("%s: S5 sleep state not supported.\n", __func__);

drivers/hv/mshv_common.c

217

pr_err("%s: cannot register reboot notifier %d\n", __func__,

drivers/hv/mshv_debugfs.c

296

pr_err("%s: failed to unmap partition %lld %s stats, err: %d\n",

drivers/hv/mshv_debugfs.c

314

pr_err("%s: failed to map partition %lld %s stats, err: %d\n",

drivers/hv/mshv_debugfs.c

575

pr_err("%s: failed to unmap hypervisor stats: %d\n",

drivers/hv/mshv_debugfs.c

589

pr_err("%s: failed to map hypervisor stats: %d\n",

drivers/hv/mshv_debugfs.c

610

pr_err("%s: failed to create hypervisor stats dentry: %d\n",

drivers/hv/mshv_debugfs.c

677

pr_err("%s: failed to create debugfs directory\n", __func__);

drivers/hv/mshv_debugfs.c

69

pr_err("%s: failed to unmap logical processor %u stats, err: %d\n",

drivers/hv/mshv_debugfs.c

87

pr_err("%s: failed to map logical processor %u stats, err: %d\n",

drivers/hv/mshv_root_main.c

1013

pr_err("%s: failed to map partition %llu vp %u parent stats, err: %d\n",

drivers/hv/mshv_root_main.c

2135

pr_err("%s: %s\n", __func__, hv_result_to_string(status));

drivers/hv/mshv_root_main.c

971

pr_err("%s: failed to unmap partition %llu vp %u self stats, err: %d\n",

drivers/hv/mshv_root_main.c

980

pr_err("%s: failed to unmap partition %llu vp %u parent stats, err: %d\n",

drivers/hv/mshv_root_main.c

998

pr_err("%s: failed to map partition %llu vp %u self stats, err: %d\n",

drivers/hv/mshv_synic.c

740

pr_err("Failed to setup IRQ for MSHV SINT vector %d: %d\n",

drivers/hv/mshv_vtl_main.c

1207

pr_err("%s: VTL low open failed: CAP_SYS_ADMIN required. task group %d, uid %d",

drivers/hv/vmbus_drv.c

1496

pr_err("Unable to initialize the hypervisor - 0x%x\n", ret);

drivers/hv/vmbus_drv.c

1526

pr_err("Can't request Hyper-V VMbus IRQ %d, Err %d",

drivers/hv/vmbus_drv.c

2161

pr_err("Unable to allocate device object for child device\n");

drivers/hv/vmbus_drv.c

2198

pr_err("Unable to register child device\n");

drivers/hv/vmbus_drv.c

2227

pr_err("Unable to register primary channel\n");

drivers/hv/vmbus_drv.c

2300

pr_err("Unable to parse Hyper-V ACPI interrupt\n");

drivers/hv/vmbus_drv.c

2640

pr_err("No interrupt data for VMBus virq %d\n", irq);

drivers/hv/vmbus_drv.c

2764

pr_err("hv_sock channel not rescinded!\n");

drivers/hv/vmbus_drv.c

2771

pr_err("Sub-channel not deleted!\n");

drivers/hv/vmbus_drv.c

2797

pr_err("Invalid proto version = 0x%x\n", vmbus_proto_version);

drivers/hv/vmbus_drv.c

2827

pr_err("channel %pUl/%pUl not present after resume.\n",

drivers/hv/vmbus_drv.c

886

pr_err("probe failed for device %s (%d)\n",

drivers/hv/vmbus_drv.c

890

pr_err("probe not set for driver %s\n",

drivers/hwmon/abituguru.c

1396

pr_err("Fatal error ran out of space for sysfs attr names. %s %s",

drivers/hwmon/abituguru.c

1588

pr_err("Device allocation failed\n");

drivers/hwmon/abituguru.c

1599

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/abituguru.c

1605

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/abituguru.c

602

pr_err("Fatal error could not restore original settings. %s %s\n",

drivers/hwmon/abituguru3.c

1008

pr_err("Fatal error motherboard has more sensors then ABIT_UGURU3_MAX_NO_SENSORS. %s %s\n",

drivers/hwmon/abituguru3.c

1031

pr_err("Fatal error ran out of space for sysfs attr names. %s %s\n",

drivers/hwmon/abituguru3.c

1260

pr_err("Device allocation failed\n");

drivers/hwmon/abituguru3.c

1271

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/abituguru3.c

1277

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/abituguru3.c

993

pr_err("error unknown motherboard ID: %04X. %s\n",

drivers/hwmon/asus_atk0110.c

1366

pr_err("Resources not safely usable due to acpi_enforce_resources kernel parameter\n");

drivers/hwmon/coretemp.c

467

pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n");

drivers/hwmon/dme1737.c

2565

pr_err("Base address not set\n");

drivers/hwmon/dme1737.c

2597

pr_err("Failed to allocate device\n");

drivers/hwmon/dme1737.c

2604

pr_err("Failed to add device resource (err = %d)\n", err);

drivers/hwmon/dme1737.c

2610

pr_err("Failed to add device (err = %d)\n", err);

drivers/hwmon/f71805f.c

1516

pr_err("Device allocation failed\n");

drivers/hwmon/f71805f.c

1527

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/f71805f.c

1534

pr_err("Platform data allocation failed\n");

drivers/hwmon/f71805f.c

1540

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/f71882fg.c

2084

pr_err("I/O address 0x%04x already in use\n", base);

drivers/hwmon/f71882fg.c

2633

pr_err("Device resource addition failed\n");

drivers/hwmon/f71882fg.c

2640

pr_err("Platform data allocation failed\n");

drivers/hwmon/f71882fg.c

2646

pr_err("Device addition failed\n");

drivers/hwmon/fam15h_power.c

427

pr_err("Failed to read max compute unit power accumulator MSR\n");

drivers/hwmon/hwmon.c

1325

pr_err("couldn't register hwmon sysfs class\n");

drivers/hwmon/ibmaem.c

1058

pr_err("Can't register aem driver\n");

drivers/hwmon/it87.c

3653

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/it87.c

3660

pr_err("Platform data allocation failed\n");

drivers/hwmon/it87.c

3666

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/lenovo-ec-sensors.c

523

pr_err(":request fail\n");

drivers/hwmon/lm78.c

930

pr_err("Device allocation failed\n");

drivers/hwmon/lm78.c

936

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/lm78.c

942

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/nct6683.c

1402

pr_err("EC base I/O port unconfigured\n");

drivers/hwmon/nct6775-platform.c

1057

pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");

drivers/hwmon/ntc_thermistor.c

402

pr_err("read channel() error: %d\n", ret);

drivers/hwmon/pc87360.c

1711

pr_err("Device allocation failed\n");

drivers/hwmon/pc87360.c

1734

pr_err("Device resources addition failed (%d)\n", err);

drivers/hwmon/pc87360.c

1740

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/pc87427.c

1161

pr_err("Device allocation failed\n");

drivers/hwmon/pc87427.c

1167

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/pc87427.c

1174

pr_err("Platform data allocation failed\n");

drivers/hwmon/pc87427.c

1180

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/sch5627.c

540

pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon",

drivers/hwmon/sch5627.c

550

pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company",

drivers/hwmon/sch5627.c

560

pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary",

drivers/hwmon/sch5627.c

586

pr_err("hardware monitoring not enabled\n");

drivers/hwmon/sch5636.c

409

pr_err("Could not read Fujitsu id byte at %#x\n",

drivers/hwmon/sch5636.c

419

pr_err("Unknown Fujitsu id: %3pE (%3ph)\n", id, id);

drivers/hwmon/sch56xx-common.c

154

pr_err("Max retries exceeded reading virtual register 0x%04hx (%d)\n",

drivers/hwmon/sch56xx-common.c

175

pr_err("Max retries exceeded reading virtual register 0x%04hx (%d)\n",

drivers/hwmon/sch56xx-common.c

81

pr_err("I/O address 0x%04x already in use\n", base);

drivers/hwmon/sis5595.c

758

pr_err("Device allocation failed\n");

drivers/hwmon/sis5595.c

764

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/sis5595.c

770

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/smsc47b397.c

266

pr_err("Device allocation failed\n");

drivers/hwmon/smsc47b397.c

272

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/smsc47b397.c

278

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/smsc47m1.c

889

pr_err("Device allocation failed\n");

drivers/hwmon/via-cputemp.c

221

pr_err("Device allocation failed\n");

drivers/hwmon/via-cputemp.c

233

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/via686a.c

828

pr_err("Device allocation failed\n");

drivers/hwmon/via686a.c

834

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/via686a.c

840

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/vt1211.c

1256

pr_err("Device allocation failed (%d)\n", err);

drivers/hwmon/vt1211.c

1267

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/vt1211.c

1273

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/vt8231.c

950

pr_err("Device allocation failed\n");

drivers/hwmon/vt8231.c

956

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/vt8231.c

962

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/w83627ehf.c

2092

pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");

drivers/hwmon/w83627hf.c

1936

pr_err("Device allocation failed\n");

drivers/hwmon/w83627hf.c

1942

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/w83627hf.c

1949

pr_err("Platform data allocation failed\n");

drivers/hwmon/w83627hf.c

1955

pr_err("Device addition failed (%d)\n", err);

drivers/hwmon/w83781d.c

1948

pr_err("Device allocation failed\n");

drivers/hwmon/w83781d.c

1954

pr_err("Device resource addition failed (%d)\n", err);

drivers/hwmon/w83781d.c

1960

pr_err("Device addition failed (%d)\n", err);

drivers/hwspinlock/hwspinlock_core.c

328

pr_err("bust operation not defined\n");

drivers/hwspinlock/hwspinlock_core.c

463

pr_err("hwspinlock id %d already exists!\n", id);

drivers/hwspinlock/hwspinlock_core.c

488

pr_err("hwspinlock %d still in use (or not present)\n", id);

drivers/hwspinlock/hwspinlock_core.c

494

pr_err("failed to delete hwspinlock %d\n", id);

drivers/hwspinlock/hwspinlock_core.c

526

pr_err("invalid parameters\n");

drivers/hwspinlock/hwspinlock_core.c

780

pr_err("invalid hwlock\n");

drivers/hwspinlock/qcom_hwspinlock.c

53

pr_err("%s: unable to query spinlock owner\n", __func__);

drivers/hwspinlock/qcom_hwspinlock.c

58

pr_err("%s: spinlock not owned by us (actual owner is %d)\n",

drivers/hwspinlock/qcom_hwspinlock.c

64

pr_err("%s: failed to unlock spinlock\n", __func__);

drivers/hwtracing/coresight/coresight-core.c

1654

pr_err("%s: error registering AMBA driver\n", drv);

drivers/hwtracing/coresight/coresight-core.c

1662

pr_err("%s: error registering platform driver\n", drv);

drivers/hwtracing/coresight/coresight-cpu-debug.c

494

pr_err("%s: unable to %s debug function: %d\n",

drivers/hwtracing/coresight/coresight-cpu-debug.c

540

pr_err("%s: unable to register notifier: %d\n",

drivers/hwtracing/coresight/coresight-etm3x-core.c

1012

pr_err("Error registering etm3x driver\n");

drivers/hwtracing/coresight/coresight-etm4x-core.c

2612

pr_err("Error registering etm4x AMBA driver\n");

drivers/hwtracing/coresight/coresight-etm4x-core.c

2620

pr_err("Error registering etm4x platform driver\n");

drivers/hwtracing/coresight/coresight-syscfg.c

1262

pr_err("cscfg: ERROR: prior module failed to unload configuration\n");

drivers/hwtracing/coresight/coresight-syscfg.c

496

pr_err("coresight-syscfg: Failed to load feature %s\n",

drivers/hwtracing/coresight/coresight-syscfg.c

509

pr_err("coresight-syscfg: Failed to load configuration %s\n",

drivers/hwtracing/coresight/coresight-sysfs.c

209

pr_err("building path(s) failed\n");

drivers/hwtracing/coresight/coresight-sysfs.c

296

pr_err("Path is not found for %s\n", dev_name(&csdev->dev));

drivers/hwtracing/coresight/coresight-tmc-core.c

853

pr_err("%s: Unsupported TMC config\n", desc.name);

drivers/hwtracing/coresight/coresight-trbe.c

1317

pr_err("TRBE is not implemented on cpu %d\n", cpu);

drivers/hwtracing/coresight/coresight-trbe.c

1323

pr_err("TRBE is owned in higher exception level on cpu %d\n", cpu);

drivers/hwtracing/coresight/coresight-trbe.c

1329

pr_err("Unsupported alignment on cpu %d\n", cpu);

drivers/hwtracing/coresight/coresight-trbe.c

1340

pr_err("Disabling TRBE on cpu%d due to erratum\n", cpu);

drivers/hwtracing/coresight/coresight-trbe.c

1482

pr_err("IRQ not found for the platform device\n");

drivers/hwtracing/coresight/coresight-trbe.c

1487

pr_err("IRQ is not a PPI\n");

drivers/hwtracing/coresight/coresight-trbe.c

1520

pr_err("TRBE wouldn't work if kernel gets unmapped at EL0\n");

drivers/hwtracing/coresight/coresight-trbe.c

1592

pr_err("Error registering %s platform driver\n", DRVNAME);

drivers/hwtracing/stm/ftrace.c

72

pr_err("Failed to register stm_source - ftrace.\n");

drivers/i2c/busses/i2c-bcm-kona.c

550

pr_err("High speed handshake failed\n");

drivers/i2c/busses/i2c-bcm-kona.c

729

pr_err("%d hz bus speed not supported\n", bus_speed);

drivers/i2c/busses/i2c-bcm-kona.c

730

pr_err("Valid speeds are 100khz, 400khz, 1mhz, and 3.4mhz\n");

drivers/i2c/busses/i2c-octeon-core.c

119

pr_err("%s: giving up\n", __func__);

drivers/i2c/busses/i2c-opal.c

47

pr_err("Failed to get the async token\n");

drivers/i2c/busses/i2c-parport.c

304

pr_err("Unable to register with parport\n");

drivers/i2c/busses/scx200_acb.c

454

pr_err("failed to register\n");

drivers/i2c/busses/scx200_acb.c

481

pr_err("can't allocate io 0x%lx-0x%lx\n", base, base + 8 - 1);

drivers/i2c/i2c-core-base.c

1534

pr_err("adapter '%s': no algo supplied!\n", adap->name);

drivers/i2c/i2c-core-base.c

1554

pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n",

drivers/i2c/i2c-core-base.c

1575

pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);

drivers/i2c/i2c-dev.c

73

pr_err("Out of device minors (%d)\n", adap->nr);

drivers/i2c/i2c-dev.c

787

pr_err("Driver Initialisation failed\n");

drivers/i2c/i2c-stub.c

359

pr_err("Please specify a chip address\n");

drivers/i2c/i2c-stub.c

365

pr_err("Invalid chip address 0x%02x\n",

drivers/i3c/device.c

332

pr_err("Trying to register an i3c driver without probe callback\n");

drivers/idle/intel_idle.c

2520

pr_err("Cannot adjust POLL\n");

drivers/idle/intel_idle.c

2534

pr_err("C-state '%s' was not found\n", name);

drivers/idle/intel_idle.c

2568

pr_err("Too many fields for C-state '%s'\n", state->name);

drivers/idle/intel_idle.c

2584

pr_err("C-state '%s' validation failed\n", state->name);

drivers/iio/adc/max1027.c

536

pr_err("Can't allocate iio device\n");

drivers/iio/adc/mt6577_auxadc.c

226

pr_err("failed to enable auxadc clock\n");

drivers/iio/adc/qcom-vadc-common.c

700

pr_err("Invalid scale type %d\n", scaletype);

drivers/iio/adc/rzg2l_adc.c

157

pr_err("%s stopping ADC timed out\n", __func__);

drivers/iio/dac/ds4424.c

117

pr_err("%s : ds4424_get_value returned %d\n",

drivers/iio/industrialio-core.c

1705

pr_err("failed to get device id\n");

drivers/iio/industrialio-core.c

353

pr_err("could not register bus type\n");

drivers/iio/industrialio-core.c

359

pr_err("failed to allocate char dev region\n");

drivers/iio/industrialio-sw-device.c

103

pr_err("Invalid device type: %s\n", type);

drivers/iio/industrialio-sw-trigger.c

107

pr_err("Invalid trigger type: %s\n", type);

drivers/iio/industrialio-trigger.c

294

pr_err("Could not find an available irq for trigger %s, CONFIG_IIO_CONSUMERS_PER_TRIGGER=%d limit might be exceeded\n",

drivers/iio/industrialio-trigger.c

86

pr_err("Duplicate trigger name '%s'\n", trig_info->name);

drivers/iio/inkern.c

1005

pr_err("iio: invalid ext_info read buffer\n");

drivers/iio/inkern.c

1035

pr_err("iio: invalid label read buffer\n");

drivers/iio/inkern.c

223

pr_err("ERROR: could not get IIO channel %pfw:%s(%i)\n",

drivers/iio/light/isl29018.c

698

pr_err("failed to disable isl29018's VCC regulator!\n");

drivers/iio/light/rpr0521.c

853

pr_err("regmap_update_bits returned %d\n", ret);

drivers/iio/test/iio-test-rescale.c

637

pr_err("Expected value is null, relative error is undefined\n");

drivers/infiniband/core/cma.c

2254

pr_err("RDMA CMA: unexpected IB CM event: %d\n",

drivers/infiniband/core/cma.c

4296

pr_err("RDMA CMA: unexpected IB CM event: %d\n",

drivers/infiniband/core/iwcm.c

1181

pr_err("iw_cm: couldn't register sysctl paths\n");

drivers/infiniband/core/iwpm_util.c

433

pr_err("%s: Invalid sockaddr family\n", __func__);

drivers/infiniband/core/iwpm_util.c

541

pr_err("%s: Invalid sockaddr family\n", __func__);

drivers/infiniband/core/mad.c

1393

pr_err("Method %d already in use\n", i);

drivers/infiniband/core/mad.c

1827

pr_err("MAD received with unsupported base version %u %s\n",

drivers/infiniband/core/mad.c

3408

pr_err("Couldn't register ib_mad client\n");

drivers/infiniband/core/rw.c

1164

pr_err("%s: failed to allocated %u MRs\n",

drivers/infiniband/core/rw.c

1174

pr_err("%s: failed to allocated %u SIG MRs\n",

drivers/infiniband/core/rw.c

757

pr_err("SG count too large: sg_cnt=%u, prot_sg_cnt=%u, pages_per_mr=%u\n",

drivers/infiniband/core/rw.c

793

pr_err("failed to map PI sg (%u)\n",

drivers/infiniband/core/sa_query.c

2319

pr_err("Couldn't find index for default PKey\n");

drivers/infiniband/core/sa_query.c

2517

pr_err("Couldn't register ib_sa client\n");

drivers/infiniband/core/sa_query.c

2523

pr_err("Couldn't initialize multicast handling\n");

drivers/infiniband/core/ucma.c

1973

pr_err("rdma_ucm: couldn't create abi_version attr\n");

drivers/infiniband/core/ucma.c

1979

pr_err("rdma_ucm: couldn't register sysctl paths\n");

drivers/infiniband/core/umem.c

319

pr_err("%s not in range. offset: %zd umem length: %zd end: %zd\n",

drivers/infiniband/core/user_mad.c

1460

pr_err("couldn't register device number\n");

drivers/infiniband/core/user_mad.c

1468

pr_err("couldn't register dynamic device number\n");

drivers/infiniband/core/user_mad.c

1475

pr_err("couldn't create class infiniband_mad\n");

drivers/infiniband/core/uverbs_main.c

1294

pr_err("user_verbs: couldn't register device number\n");

drivers/infiniband/core/uverbs_main.c

1302

pr_err("couldn't register dynamic device number\n");

drivers/infiniband/core/uverbs_main.c

1308

pr_err("user_verbs: couldn't create class infiniband_verbs\n");

drivers/infiniband/core/uverbs_main.c

1314

pr_err("user_verbs: couldn't create abi_version attribute\n");

drivers/infiniband/core/uverbs_main.c

1320

pr_err("user_verbs: couldn't register client\n");

drivers/infiniband/hw/bng_re/bng_dev.c

31

pr_err("%s: bng_re_dev allocation failure!", KBUILD_MODNAME);

drivers/infiniband/hw/bng_re/bng_dev.c

503

pr_err("%s: Failed to register auxiliary driver\n",

drivers/infiniband/hw/bnxt_re/main.c

2020

pr_err("Failed to register with IB: %#x\n", rc);

drivers/infiniband/hw/bnxt_re/main.c

2439

pr_err("Failed to register with IB: %s",

drivers/infiniband/hw/bnxt_re/main.c

2597

pr_err("%s: Failed to register auxiliary driver\n",

drivers/infiniband/hw/cxgb4/cm.c

1063

pr_err("%s - cannot alloc skb!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

1143

pr_err("%s - cannot alloc skb!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

1425

pr_err("update_rx_credits - cannot alloc skb!\n");

drivers/infiniband/hw/cxgb4/cm.c

1500

pr_err("%s MPA version mismatch. Local = %d, Received = %d\n",

drivers/infiniband/hw/cxgb4/cm.c

1655

pr_err("%s: RTR mismatch, sending TERM\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

1674

pr_err("%s: Insufficient IRD, sending TERM\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

1745

pr_err("%s MPA version mismatch. Local = %d, Received = %d\n",

drivers/infiniband/hw/cxgb4/cm.c

181

pr_err("%s timer already started! ep %p\n",

drivers/infiniband/hw/cxgb4/cm.c

1879

pr_err("%s Unexpected streaming data." \

drivers/infiniband/hw/cxgb4/cm.c

1947

pr_err("%s ep %p state %d\n", __func__, ep, ep->com.state);

drivers/infiniband/hw/cxgb4/cm.c

209

pr_err("%s - device in error state - dropping\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

2193

pr_err("%s - cannot alloc atid\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

2223

pr_err("%s - cannot find route\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

2231

pr_err("%s - cannot alloc l2e\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

226

pr_err("%s - device in error state - dropping\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

2533

pr_err("%s connect request on invalid stid %d\n",

drivers/infiniband/hw/cxgb4/cm.c

2539

pr_err("%s - listening ep not in LISTEN\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

2572

pr_err("%s - failed to find dst entry!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

2578

pr_err("%s - failed to allocate ep entry!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

2586

pr_err("%s - failed to allocate l2t entry!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

2916

pr_err("%s - qp <- error failed!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

3320

pr_err("%s - cannot alloc ep\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

3361

pr_err("%s - cannot alloc atid\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

3427

pr_err("%s - cannot find route\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

3435

pr_err("%s - cannot alloc l2e\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

3493

pr_err("cxgb4_create_server6/filter failed err %d stid %d laddr %pI6 lport %d\n",

drivers/infiniband/hw/cxgb4/cm.c

3534

pr_err("cxgb4_create_server/filter failed err %d stid %d laddr %pI4 lport %d\n"

drivers/infiniband/hw/cxgb4/cm.c

3550

pr_err("%s - cannot alloc ep\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

3575

pr_err("%s - cannot alloc stid\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

3736

pr_err("%s - qp <- error failed!\n",

drivers/infiniband/hw/cxgb4/cm.c

3780

pr_err("active ofld_connect_wr failure %d atid %d\n",

drivers/infiniband/hw/cxgb4/cm.c

3809

pr_err("%s passive open failure %d\n", __func__, req->retval);

drivers/infiniband/hw/cxgb4/cm.c

3919

pr_err("%s unexpected ofld conn wr state %d\n",

drivers/infiniband/hw/cxgb4/cm.c

4046

pr_err("%s - cxgb4_ofld_send error %d - dropping\n", __func__,

drivers/infiniband/hw/cxgb4/cm.c

4115

pr_err("T%d Chip is not supported\n",

drivers/infiniband/hw/cxgb4/cm.c

4145

pr_err("%s - failed to find dst entry!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

4151

pr_err("%s - failed to allocate neigh!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

4158

pr_err("%s - failed to find device!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

4173

pr_err("%s - failed to allocate l2t entry!\n",

drivers/infiniband/hw/cxgb4/cm.c

4315

pr_err("No handler for opcode 0x%x.\n", opcode);

drivers/infiniband/hw/cxgb4/cm.c

4372

pr_err("Unexpected SET_TCB_RPL status %u for tid %u\n",

drivers/infiniband/hw/cxgb4/cm.c

4401

pr_err("%s unexpected fw6 msg type %u\n",

drivers/infiniband/hw/cxgb4/cm.c

477

pr_err("ARP failure\n");

drivers/infiniband/hw/cxgb4/cm.c

483

pr_err("ARP failure during MPA Negotiation - Closing Connection\n");

drivers/infiniband/hw/cxgb4/cm.c

538

pr_err("ARP failure during accept - tid %u - dropping connection\n",

drivers/infiniband/hw/cxgb4/cm.c

552

pr_err("ARP failure during connect\n");

drivers/infiniband/hw/cxgb4/cm.c

757

pr_err("T%d Chip is not supported\n",

drivers/infiniband/hw/cxgb4/cm.c

770

pr_err("%s - failed to alloc skb\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

843

pr_err("T%d Chip is not supported\n",

drivers/infiniband/hw/cxgb4/cm.c

893

pr_err("T%d Chip is not supported\n",

drivers/infiniband/hw/cxgb4/cq.c

811

pr_err("Unexpected opcode %d in the CQE received for QPID=0x%0x\n",

drivers/infiniband/hw/cxgb4/cq.c

848

pr_err("Unexpected opcode %d in the CQE received for QPID=0x%0x\n",

drivers/infiniband/hw/cxgb4/cq.c

903

pr_err("Unexpected cqe_status 0x%x for QPID=0x%0x\n",

drivers/infiniband/hw/cxgb4/device.c

1018

pr_err("Unable to ioremap BAR2\n");

drivers/infiniband/hw/cxgb4/device.c

1030

pr_err("Unable to ioremap onchip mem\n");

drivers/infiniband/hw/cxgb4/device.c

1042

pr_err("Unable to open CXIO rdev err %d\n", ret);

drivers/infiniband/hw/cxgb4/device.c

1230

pr_err("%s: initialization failed: %pe\n",

drivers/infiniband/hw/cxgb4/device.c

1382

pr_err("%s: Fatal error - DB overflow recovery failed - error syncing SQ qid %u\n",

drivers/infiniband/hw/cxgb4/device.c

1396

pr_err("%s: Fatal error - DB overflow recovery failed - error syncing RQ qid %u\n",

drivers/infiniband/hw/cxgb4/device.c

1429

pr_err("%s: Fatal error - DB overflow recovery failed\n",

drivers/infiniband/hw/cxgb4/device.c

1544

pr_err("Failed creating workqueue to register iwarp device\n");

drivers/infiniband/hw/cxgb4/device.c

797

pr_err("%s: unsupported udb/ucq densities %u/%u\n",

drivers/infiniband/hw/cxgb4/device.c

804

pr_err("%s: unsupported qp and cq id ranges qp start %u size %u cq start %u size %u\n",

drivers/infiniband/hw/cxgb4/device.c

813

pr_err("%s: unsupported sge host page size %u\n",

drivers/infiniband/hw/cxgb4/device.c

853

pr_err("error %d initializing resources\n", err);

drivers/infiniband/hw/cxgb4/device.c

858

pr_err("error %d initializing pbl pool\n", err);

drivers/infiniband/hw/cxgb4/device.c

863

pr_err("error %d initializing rqt pool\n", err);

drivers/infiniband/hw/cxgb4/device.c

868

pr_err("error %d initializing ocqp pool\n", err);

drivers/infiniband/hw/cxgb4/device.c

982

pr_err("Cannot allocate ib device\n");

drivers/infiniband/hw/cxgb4/ev.c

129

pr_err("BAD AE qpid 0x%x opcode %d status 0x%x type %d wrid.hi 0x%x wrid.lo 0x%x\n",

drivers/infiniband/hw/cxgb4/ev.c

144

pr_err("BAD AE cqid 0x%x qpid 0x%x opcode %d status 0x%x type %d wrid.hi 0x%x wrid.lo 0x%x\n",

drivers/infiniband/hw/cxgb4/ev.c

168

pr_err("AE with status 0!\n");

drivers/infiniband/hw/cxgb4/ev.c

210

pr_err("Unknown T4 status 0x%x QPID 0x%x\n",

drivers/infiniband/hw/cxgb4/iw_cxgb4.h

273

pr_err("%s - Device %s not responding (disabling device) - tid %u qpid %u\n",

drivers/infiniband/hw/cxgb4/provider.c

558

pr_err("%s - Failed registering iwarp device: %d\n",

drivers/infiniband/hw/cxgb4/qp.c

2028

pr_err("%s in a bad state %d\n", __func__, qhp->attr.state);

drivers/infiniband/hw/cxgb4/t4.h

793

pr_err("cq overflow cqid %u\n", cq->cqid);

drivers/infiniband/hw/hfi1/affinity.c

166

pr_err("HFI: Invalid PCI NUMA node. Performance may be affected\n");

drivers/infiniband/hw/hfi1/affinity.c

167

pr_err("HFI: System BIOS may need to be upgraded\n");

drivers/infiniband/hw/hfi1/affinity.c

807

pr_err("Failed to register sdma irq affinity notifier for irq %d\n",

drivers/infiniband/hw/hfi1/affinity.c

816

pr_err("Failed to cleanup sdma irq affinity notifier for irq %d\n",

drivers/infiniband/hw/hfi1/device.c

102

pr_err("Could not allocate chrdev region (err %d)\n", -ret);

drivers/infiniband/hw/hfi1/device.c

108

pr_err("Could not create device class (err %d)\n", -ret);

drivers/infiniband/hw/hfi1/device.c

115

pr_err("Could not create device class for user accessible files (err %d)\n",

drivers/infiniband/hw/hfi1/device.c

55

pr_err("Could not add cdev for minor %d, %s (err %d)\n",

drivers/infiniband/hw/hfi1/device.c

67

pr_err("Could not create device for minor %d, %s (err %pe)\n",

drivers/infiniband/hw/hfi1/init.c

1391

pr_err("Invalid max_mtu 0x%x, using 0x%x instead\n",

drivers/infiniband/hw/hfi1/init.c

1411

pr_err("Invalid mode: both receive interrupt count and available timeout are zero - setting interrupt count to 1\n");

drivers/infiniband/hw/hfi1/init.c

1419

pr_err("Invalid mode: receive interrupt count greater than 1 and available timeout is zero - setting available timeout to 1\n");

drivers/infiniband/hw/hfi1/init.c

1427

pr_err("Invalid mode: dynamic receive interrupt mitigation with invalid count and timeout - turning dynamic off\n");

drivers/infiniband/hw/hfi1/init.c

1436

pr_err("Failed to allocate opfn_wq");

drivers/infiniband/hw/hfi1/init.c

1447

pr_err("Unable to register driver: error %d\n", -ret);

drivers/infiniband/hw/hfi1/init.c

772

pr_err("alloc_workqueue failed for port %d\n", pidx + 1);

drivers/infiniband/hw/hns/hns_roce_bond.h

18

pr_err("HNS RoCE Bonding: " fmt, ##__VA_ARGS__)

drivers/infiniband/hw/hns/hns_roce_hw_v2.c

2283

pr_err("table %u not support hop_num = %u!\n", hem_type,

drivers/infiniband/hw/irdma/main.c

163

pr_err("Failed i40iw(gen_1) auxiliary_driver_register() ret=%d\n",

drivers/infiniband/hw/irdma/main.c

171

pr_err("Failed icrdma(gen_2) auxiliary_driver_register() ret=%d\n",

drivers/infiniband/hw/irdma/main.c

180

pr_err("Failed ig3rdma(gen_3) core auxiliary_driver_register() ret=%d\n",

drivers/infiniband/hw/irdma/main.c

191

pr_err("Failed ig3rdma vport auxiliary_driver_register() ret=%d\n",

drivers/infiniband/hw/mlx4/alias_GUID.c

113

pr_err("%s: ERROR: asked for index:%d\n", __func__, index);

drivers/infiniband/hw/mlx4/alias_GUID.c

317

pr_err("block num mismatch: %d != %d\n",

drivers/infiniband/hw/mlx4/alias_GUID.c

897

pr_err("init_alias_guid_service: Failed. (ret:%d)\n", ret);

drivers/infiniband/hw/mlx4/cm.c

107

pr_err("trying to set local_comm_id in SIDR_REP\n");

drivers/infiniband/hw/mlx4/cm.c

122

pr_err("trying to set remote_comm_id in SIDR_REQ\n");

drivers/infiniband/hw/mlx4/cm.c

137

pr_err("trying to set remote_comm_id in SIDR_REQ\n");

drivers/infiniband/hw/mlx4/cm.c

92

pr_err("trying to set local_comm_id in SIDR_REP\n");

drivers/infiniband/hw/mlx4/mad.c

1751

pr_err("Failed reposting tunnel "

drivers/infiniband/hw/mlx4/mad.c

1789

pr_err("Fatal error (%d) on a MAD QP on port %d\n",

drivers/infiniband/hw/mlx4/mad.c

1835

pr_err("Couldn't create %s QP (%pe)\n",

drivers/infiniband/hw/mlx4/mad.c

1855

pr_err("Couldn't change %s qp state to INIT (%d)\n",

drivers/infiniband/hw/mlx4/mad.c

1862

pr_err("Couldn't change %s qp state to RTR (%d)\n",

drivers/infiniband/hw/mlx4/mad.c

1870

pr_err("Couldn't change %s qp state to RTS (%d)\n",

drivers/infiniband/hw/mlx4/mad.c

1878

pr_err(" mlx4_ib_post_pv_buf error"

drivers/infiniband/hw/mlx4/mad.c

1928

pr_err("Failed reposting SQP "

drivers/infiniband/hw/mlx4/mad.c

1995

pr_err("Failed allocating qp0 tunnel bufs (%d)\n", ret);

drivers/infiniband/hw/mlx4/mad.c

2002

pr_err("Failed allocating qp1 tunnel bufs (%d)\n", ret);

drivers/infiniband/hw/mlx4/mad.c

2016

pr_err("Couldn't create tunnel CQ (%pe)\n", ctx->cq);

drivers/infiniband/hw/mlx4/mad.c

2023

pr_err("Couldn't create tunnel PD (%pe)\n", ctx->pd);

drivers/infiniband/hw/mlx4/mad.c

2030

pr_err("Couldn't create %s QP0 (%d)\n",

drivers/infiniband/hw/mlx4/mad.c

2038

pr_err("Couldn't create %s QP1 (%d)\n",

drivers/infiniband/hw/mlx4/mad.c

2053

pr_err("Couldn't arm tunnel cq (%d)\n", ret);

drivers/infiniband/hw/mlx4/mad.c

2188

pr_err("Failed initializing mcg para-virt (%d)\n", ret);

drivers/infiniband/hw/mlx4/mad.c

2194

pr_err("Failed to create tunnelling WQ for port %d\n", port);

drivers/infiniband/hw/mlx4/mad.c

2201

pr_err("Failed to create wire WQ for port %d\n", port);

drivers/infiniband/hw/mlx4/mad.c

2208

pr_err("Failed to create up/down WQ for port %d\n", port);

drivers/infiniband/hw/mlx4/main.c

1534

pr_err("Invalid priority value %d\n", flow_attr->priority);

drivers/infiniband/hw/mlx4/main.c

1590

pr_err("mcg table is full. Fail to register network rule.\n");

drivers/infiniband/hw/mlx4/main.c

1592

pr_err("Device managed flow steering is disabled. Fail to register network rule.\n");

drivers/infiniband/hw/mlx4/main.c

1594

pr_err("Invalid argument. Fail to register network rule.\n");

drivers/infiniband/hw/mlx4/main.c

1607

pr_err("Fail to detach network rule. registration id = 0x%llx\n",

drivers/infiniband/hw/mlx4/main.c

1857

pr_err("multicast attach op failed, err %d\n", err);

drivers/infiniband/hw/mlx4/main.c

1937

pr_err("Couldn't find reg_id for mgid. Steering rule is left attached\n");

drivers/infiniband/hw/mlx4/main.c

3171

pr_err("Unable to get current sl to vl mapping for port %d. Using all zeroes (%d)\n",

drivers/infiniband/hw/mlx4/main.c

949

pr_err("Unable to get default sl to vl mapping for port %d. Using all zeroes (%d)\n",

drivers/infiniband/hw/mlx4/mcg.c

49

#define mcg_error(fmt, arg...) pr_err(fmt, ##arg)

drivers/infiniband/hw/mlx4/mcg.c

59

pr_err(" %16s: " format, (group)->name, ## arg)

drivers/infiniband/hw/mlx4/qp.c

1653

pr_err("Failed to create GSI QP for RoCEv2 (%pe)\n",

drivers/infiniband/hw/mlx4/qp.c

1807

pr_err("sgid_index (%u) too large. max is %d\n",

drivers/infiniband/hw/mlx4/qp.c

2208

pr_err("path MTU (%u) is invalid\n",

drivers/infiniband/hw/mlx4/qp.c

2427

pr_err("Cannot use reserved QKEY"

drivers/infiniband/hw/mlx4/qp.c

2848

pr_err("Failed to modify GSI QP for RoCEv2 (%d)\n",

drivers/infiniband/hw/mlx4/qp.c

3232

pr_err("built UD header of size %d:\n", header_size);

drivers/infiniband/hw/mlx4/qp.c

3235

pr_err(" [%02x] ", i * 4);

drivers/infiniband/hw/mlx4/qp.c

3241

pr_err("\n");

drivers/infiniband/hw/mlx4/qp.c

3563

pr_err("Failed to get gid at index %d. RoCEv2 will not work properly\n",

drivers/infiniband/hw/mlx4/sysfs.c

194

pr_err("failed to create %s\n", vdentry->dentry.attr.name);

drivers/infiniband/hw/mlx4/sysfs.c

210

pr_err("failed to create %s\n", attr->name);

drivers/infiniband/hw/mlx4/sysfs.c

350

pr_err("add_port_entries FAILED: for port:%d, error: %d\n",

drivers/infiniband/hw/mlx4/sysfs.c

478

pr_err("mlx4_gen_pkey_eqe failed for slave %d,"

drivers/infiniband/hw/mlx4/sysfs.c

593

pr_err("failed to create smi_enabled\n");

drivers/infiniband/hw/mlx4/sysfs.c

604

pr_err("failed to create enable_smi_admin\n");

drivers/infiniband/hw/mlx4/sysfs.c

835

pr_err("mlx4_ib_device_register_sysfs error (%d)\n", ret);

drivers/infiniband/hw/mlx4/sysfs.c

84

pr_err("GUID 0 block 0 is RO\n");

drivers/infiniband/hw/mlx5/cq.c

389

pr_err("Got signature completion error with bad syndrome %04x\n",

drivers/infiniband/hw/mlx5/mr.c

2637

pr_err("Invalid status check mask\n");

drivers/infiniband/hw/mlx5/mr.c

2646

pr_err("signature status check requested on a non-signature enabled MR\n");

drivers/infiniband/hw/mlx5/qp.c

344

pr_err("%s/%d: QP %d error: %s (0x%x 0x%x 0x%x)\n",

drivers/infiniband/hw/mlx5/qp.c

3554

pr_err("sgid_index (%u) too large. max is %d\n",

drivers/infiniband/hw/mlx5/qp.c

3877

pr_err("Failed configuring rate limit(err %d): \

drivers/infiniband/hw/mlx5/wr.c

489

pr_err("Bad block size given: %u\n", block_size);

drivers/infiniband/hw/mlx5/wr.c

624

pr_err("Bad signature type (%d) is given.\n",

drivers/infiniband/hw/ocrdma/ocrdma_ah.c

103

pr_err("ocrdma%d:Using VLAN with PFC is recommended\n",

drivers/infiniband/hw/ocrdma/ocrdma_ah.c

105

pr_err("ocrdma%d:Using VLAN 0 for this connection\n",

drivers/infiniband/hw/ocrdma/ocrdma_ah.c

68

pr_err("ocrdma%d: Invalid network header\n", devid);

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

1011

pr_err("EQ full on eqid = 0x%x, eqe = 0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

1065

pr_err("%s(%d) mailbox timeout: fw not responding\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

1095

pr_err("%s() cqe_status=0x%x, ext_status=0x%x,\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

1099

pr_err("opcode=0x%x, subsystem=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

1135

pr_err("opcode=0x%x, subsystem=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

1601

pr_err("%s(%d) Unable to initialize PD pool, using default.\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

1788

pr_err("%s(%d) max_cqe=0x%x, requester_cqe=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2049

pr_err("%s() status=%d\n", __func__, status);

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2072

pr_err("%s() err. status=%d\n", __func__, status);

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2196

pr_err("%s() req. max_send_wr=0x%x\n", __func__,

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2246

pr_err("%s() req. max_recv_wr=0x%x\n", __func__,

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2453

pr_err("%s(%d) rq_err\n", __func__, dev->id);

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2456

pr_err("%s(%d) sq_err\n", __func__, dev->id);

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2551

pr_err("ocrdma%d:Using VLAN with PFC is recommended\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2553

pr_err("ocrdma%d:Using VLAN 0 for this connection\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2612

pr_err("ocrdma%d: IB MTU %d is not supported\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

2761

pr_err("%s() req. max_wr=0x%x\n", __func__,

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

3006

pr_err("%s(): status=%d\n", __func__, status);

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

3225

pr_err("%s() status=%d\n", __func__, status);

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

699

pr_err("ocrdma%d:Async event - qpid %u is not valid\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

709

pr_err("ocrdma%d:Async event - cqid %u is not valid\n",

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

776

pr_err("%s() unknown type=0x%x\n", __func__, type);

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

860

pr_err("%s(%d) invalid evt code=0x%x\n", __func__,

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

876

pr_err("%s() cqe for invalid tag0x%x.expected=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_main.c

239

pr_err("%s: stats resource allocation failed\n", __func__);

drivers/infiniband/hw/ocrdma/ocrdma_main.c

247

pr_err("%s(%d) error.\n", __func__, dev->id);

drivers/infiniband/hw/ocrdma/ocrdma_main.c

267

pr_err("Unable to allocate ib device\n");

drivers/infiniband/hw/ocrdma/ocrdma_main.c

315

pr_err("%s() leaving. ret=%d\n", __func__, status);

drivers/infiniband/hw/ocrdma/ocrdma_stats.c

59

pr_err("%s: No space in stats buff\n", __func__);

drivers/infiniband/hw/ocrdma/ocrdma_stats.c

619

pr_err("%s: stats mbox failed with status = %d\n",

drivers/infiniband/hw/ocrdma/ocrdma_stats.c

659

pr_err("Failed to reset stats = %d\n", status);

drivers/infiniband/hw/ocrdma/ocrdma_stats.c

79

pr_err("%s: stats mbox allocation failed\n", __func__);

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1109

pr_err("%s(%d) unsupported qp type=0x%x requested\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1116

pr_err("%s(%d) unsupported send_wr=0x%x requested\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1118

pr_err("%s(%d) supported send_wr=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1123

pr_err("%s(%d) unsupported recv_wr=0x%x requested\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1125

pr_err("%s(%d) supported recv_wr=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1130

pr_err("%s(%d) unsupported inline data size=0x%x requested\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1132

pr_err("%s(%d) supported inline data size=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1137

pr_err("%s(%d) unsupported send_sge=0x%x requested\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1139

pr_err("%s(%d) supported send_sge=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1144

pr_err("%s(%d) unsupported recv_sge=0x%x requested\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1146

pr_err("%s(%d) supported recv_sge=0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1152

pr_err

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1159

pr_err("%s(%d) GSI special QPs already created.\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1167

pr_err("%s(%d) Consumer QP cannot use GSI CQs.\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1213

pr_err("%s(%d) user copy error.\n", __func__, dev->id);

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1362

pr_err("%s(%d) error=%d\n", __func__, dev->id, status);

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1414

pr_err("%s(%d) invalid attribute mask=0x%x specified for\n"

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

1932

pr_err("%s() supported_len=0x%x,\n"

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

2434

pr_err("%s() invalid opcode received = 0x%x\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

436

pr_err("%s(%d) Freeing in use pdid=0x%x.\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

726

pr_err("%s err, invalid access rights\n", __func__);

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

922

pr_err("%s(%d) fw not responding.\n",

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

951

pr_err("%s(%d) copy error cqid=0x%x.\n",

drivers/infiniband/hw/qedr/main.c

1031

pr_err("Event not supported\n");

drivers/infiniband/hw/qedr/main.c

287

pr_err("Status block initialization failed\n");

drivers/infiniband/hw/qedr/main.c

636

pr_err("unaffiliated event not implemented yet\n");

drivers/infiniband/hw/qedr/main.c

853

pr_err("Unable to allocate ib device\n");

drivers/infiniband/hw/qedr/verbs.c

2543

pr_err("error: Only MTU sizes of 256, 512, 1024, 2048 and 4096 are supported by RoCE\n");

drivers/infiniband/hw/qedr/verbs.c

2555

pr_err("Fixing zeroed MTU to qp->mtu = %d\n", qp->mtu);

drivers/infiniband/sw/rdmavt/vt.c

23

pr_err("Error in driver CQ init.\n");

drivers/infiniband/sw/rdmavt/vt.c

491

pr_err("Driver support req not met at %d\n", i);

drivers/infiniband/sw/rdmavt/vt.c

504

pr_err("Error in driver QP init.\n");

drivers/infiniband/sw/rdmavt/vt.c

521

pr_err("Error in driver MR init.\n");

drivers/infiniband/sw/rxe/rxe_net.c

718

pr_err("Failed to create IPv4 UDP tunnel\n");

drivers/infiniband/sw/rxe/rxe_net.c

739

pr_err("Failed to create IPv6 UDP tunnel\n");

drivers/infiniband/sw/rxe/rxe_net.c

767

pr_err("Failed to register netdev notifier\n");

drivers/infiniband/ulp/iser/iscsi_iser.h

96

pr_err(PFX "%s: " fmt, __func__ , ## arg)

drivers/infiniband/ulp/isert/ib_isert.h

36

pr_err(PFX "%s: " fmt, __func__ , ## arg)

drivers/infiniband/ulp/opa_vnic/opa_vnic_vema.c

1042

pr_err("VNIC driver register failed %d\n", rc);

drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c

442

pr_err("kobject_init_and_add: %pe\n", ERR_PTR(err));

drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c

448

pr_err("sysfs_create_group(): %pe\n", ERR_PTR(err));

drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c

454

pr_err("kobject_init_and_add: %pe\n", ERR_PTR(err));

drivers/infiniband/ulp/rtrs/rtrs-clt-sysfs.c

462

pr_err("failed to create stats sysfs group, err: %pe\n", ERR_PTR(err));

drivers/infiniband/ulp/rtrs/rtrs-clt.c

1393

pr_err("Failed to alloc clt_path->max_pages_per_mr %d: %pe\n",

drivers/infiniband/ulp/rtrs/rtrs-clt.c

2835

pr_err("pathname cannot contain / and .\n");

drivers/infiniband/ulp/rtrs/rtrs-clt.c

3194

pr_err("Memory registrations not supported.\n");

drivers/infiniband/ulp/rtrs/rtrs-clt.c

3219

pr_err("Failed to create rtrs-client dev class\n");

drivers/infiniband/ulp/rtrs/rtrs-log.h

16

rtrs_log(pr_err, obj, fmt, ##__VA_ARGS__)

drivers/infiniband/ulp/rtrs/rtrs-srv-sysfs.c

179

pr_err("device_add(): %pe\n", ERR_PTR(err));

drivers/infiniband/ulp/rtrs/rtrs-srv-sysfs.c

186

pr_err("kobject_create_and_add(): %pe\n", ERR_PTR(err));

drivers/infiniband/ulp/rtrs/rtrs-srv.c

156

pr_err("Percpu reference init failed\n");

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1667

pr_err("rdma_accept(), err: %pe\n", ERR_PTR(err));

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1685

pr_err("rdma_reject(), err: %pe\n", ERR_PTR(err));

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1899

pr_err("Invalid RTRS connection request\n");

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1903

pr_err("Invalid RTRS magic\n");

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1908

pr_err("Unsupported major RTRS version: %d, expected %d\n",

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1915

pr_err("Too many connections requested: %d\n", con_num);

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1921

pr_err("Incorrect cid: %d >= %d\n", cid, con_num);

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1928

pr_err("get_or_create_srv(), error %d\n", err);

drivers/infiniband/ulp/rtrs/rtrs-srv.c

1969

pr_err("RTRS server session allocation failed: %d\n", err);

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2062

pr_err("Ignoring unexpected CM event %s, err %pe\n",

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2066

pr_err("Ignoring unexpected CM event %s, err %s\n",

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2087

pr_err("Creating id for RDMA connection failed, err: %d\n",

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2093

pr_err("Binding RDMA address failed, err: %pe\n", ERR_PTR(ret));

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2098

pr_err("Listening on RDMA connection failed, err: %pe\n",

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2198

pr_err("Failed to initialize RDMA connection");

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2312

pr_err("Invalid sess_queue_depth value %d, has to be >= %d, <= %d.\n",

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2317

pr_err("Invalid max_chunk_size value %d, has to be >= %d and should be power of two.\n",

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2328

pr_err("RDMA immediate size (%db) not enough to encode %d buffers of size %dB. Reduce 'sess_queue_depth' or 'max_chunk_size' parameters.\n",

drivers/infiniband/ulp/rtrs/rtrs-srv.c

2380

pr_err("Failed to load module, invalid module parameters, err: %pe\n",

drivers/infiniband/ulp/srp/ib_srp.c

1606

pr_err("Inconsistent: scsi len %d <> desc len %lld <> mr len %lld; ndesc %d; nmdesc = %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

350

pr_err("No route available from %pISpsc to %pISpsc (%d)\n",

drivers/infiniband/ulp/srp/ib_srp.c

360

pr_err("Resolving address %pISpsc failed (%d)\n",

drivers/infiniband/ulp/srp/ib_srp.c

4183

pr_err("couldn't register class infiniband_srp\n");

drivers/infiniband/ulp/srp/ib_srp.c

4191

pr_err("couldn't register IB client\n");

drivers/infiniband/ulp/srp/ib_srp.c

581

pr_err("QP creation failed for dev %s: %d\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1117

pr_err("received unsupported SRP_CMD request type (%u out + %u in != %u / %zu)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1135

pr_err("Immediate data (length %d + %d) exceeds request size %d\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1140

pr_err("Received too few data - %d < %d\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1149

pr_err("Received invalid write request\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

1194

pr_err("Translating pkey %#x failed (%d) - using index 0\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1410

pr_err("%s[%d]: wrong state = %d\n", __func__,

drivers/infiniband/ulp/srpt/ib_srpt.c

1590

pr_err("0x%llx: parsing SRP descriptor table failed.\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1723

pr_err("Not yet implemented: SRP_I_LOGOUT\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

1732

pr_err("Received SRP_RSP\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

1735

pr_err("received IU with unknown opcode 0x%x\n", opcode);

drivers/infiniband/ulp/srpt/ib_srpt.c

1765

pr_err("req_lim = %d < 0\n", req_lim);

drivers/infiniband/ulp/srpt/ib_srpt.c

1836

pr_err("IB completion has been received too late for wr_id = %u.\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1868

pr_err("failed to create CQ cqe= %d ret= %pe\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1920

pr_err("failed to create queue pair with sq_size = %d (%d)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1975

pr_err("%s-%d: changing queue pair into error state failed: %d\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1980

pr_err("%s-%d: queuing zero-length write failed: %d\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2253

pr_err("rejected SRP_LOGIN_REQ because its length (%d bytes) is out of range (%d .. %d)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2270

pr_err("rejected SRP_LOGIN_REQ because it has an invalid target port identifier.\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

2278

pr_err("rejected SRP_LOGIN_REQ because out of memory.\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

2316

pr_err("rejected SRP_LOGIN_REQ because creating a new QP SQ ring failed.\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

2352

pr_err("rejected SRP_LOGIN_REQ because creating a new QP RQ ring failed.\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

2364

pr_err("rejected SRP_LOGIN_REQ because creating a new RDMA channel failed.\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

242

pr_err("received unrecognized IB event %d\n", event->event);

drivers/infiniband/ulp/srpt/ib_srpt.c

2460

pr_err("rejected SRP_LOGIN_REQ because enabling RTR failed (error code = %d)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2522

pr_err("sending SRP_LOGIN_REQ response failed (error code = %d)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2670

pr_err("%s-%d: QP transition to RTS failed\n", ch->sess_name,

drivers/infiniband/ulp/srpt/ib_srpt.c

2682

pr_err("%s-%d: channel transition to LIVE state failed\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2749

pr_err("received unrecognized CM event %d\n", event->event);

drivers/infiniband/ulp/srpt/ib_srpt.c

2791

pr_err("received unrecognized RDMA CM event %d\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2839

pr_err("%s: ib_post_send() returned %d for %d (avail: %d)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2947

pr_err("%s: sending cmd response failed for tag %llu (%d)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

300

pr_err("received unrecognized IB QP event %d\n", event->event);

drivers/infiniband/ulp/srpt/ib_srpt.c

3259

pr_err("ib_cm_listen() failed: %d (cm_id state = %d)\n", ret,

drivers/infiniband/ulp/srpt/ib_srpt.c

3281

pr_err("MAD registration failed for %s-%d.\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

3507

pr_err("invalid initiator port ID %s\n", name);

drivers/infiniband/ulp/srpt/ib_srpt.c

3530

pr_err("kstrtoul() failed with ret: %d\n", ret);

drivers/infiniband/ulp/srpt/ib_srpt.c

3534

pr_err("val: %lu exceeds MAX_SRPT_RDMA_SIZE: %d\n", val,

drivers/infiniband/ulp/srpt/ib_srpt.c

3539

pr_err("val: %lu smaller than DEFAULT_MAX_RDMA_SIZE: %d\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

3567

pr_err("kstrtoul() failed with ret: %d\n", ret);

drivers/infiniband/ulp/srpt/ib_srpt.c

3571

pr_err("val: %lu exceeds MAX_SRPT_RSP_SIZE: %d\n", val,

drivers/infiniband/ulp/srpt/ib_srpt.c

3576

pr_err("val: %lu smaller than MIN_MAX_RSP_SIZE: %d\n", val,

drivers/infiniband/ulp/srpt/ib_srpt.c

3604

pr_err("kstrtoul() failed with ret: %d\n", ret);

drivers/infiniband/ulp/srpt/ib_srpt.c

3608

pr_err("val: %lu exceeds MAX_SRPT_SRQ_SIZE: %d\n", val,

drivers/infiniband/ulp/srpt/ib_srpt.c

3613

pr_err("val: %lu smaller than MIN_SRPT_SRQ_SIZE: %d\n", val,

drivers/infiniband/ulp/srpt/ib_srpt.c

3688

pr_err("RDMA/CM ID creation failed: %pe\n", rdma_cm_id);

drivers/infiniband/ulp/srpt/ib_srpt.c

3697

pr_err("Binding RDMA/CM ID to address %s failed: %d\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

3706

pr_err("rdma_listen() failed: %d\n", ret);

drivers/infiniband/ulp/srpt/ib_srpt.c

3946

pr_err("invalid value %d for kernel module parameter srp_max_req_size -- must be at least %d.\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

3953

pr_err("invalid value %d for kernel module parameter srpt_srq_size -- must be in the range [%d..%d].\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

3964

pr_err("couldn't register IB client\n");

drivers/infiniband/ulp/srpt/ib_srpt.c

671

pr_err("%s-%d: MAD agent registration failed (%pe). Note: this is expected if SR-IOV is enabled.\n",

drivers/input/apm-power.c

65

pr_err("Failed to register input power handler, error %d\n",

drivers/input/apm-power.c

73

pr_err("Failed to open input power device, error %d\n", error);

drivers/input/evdev.c

1345

pr_err("failed to reserve new minor: %d\n", error);

drivers/input/ff-memless.c

205

pr_err("invalid type in get_compatible_type()\n");

drivers/input/ff-memless.c

313

pr_err("invalid type in ml_combine_effects()\n");

drivers/input/gameport/gameport.c

379

pr_err("Not enough memory to queue event %d\n", event_type);

drivers/input/gameport/gameport.c

746

pr_err("driver_attach() failed for %s, error: %d\n",

drivers/input/gameport/gameport.c

767

pr_err("driver_register() failed for %s, error: %d\n",

drivers/input/gameport/gameport.c

867

pr_err("failed to register gameport bus, error: %d\n", error);

drivers/input/input.c

2075

pr_err("%s: invalid code %u for type %u\n", __func__, code,

drivers/input/input.c

2120

pr_err("%s: unknown type %u (code %u)\n", __func__, type, code);

drivers/input/input.c

2436

pr_err("%s: only one event processing method can be defined (%s)\n",

drivers/input/input.c

2722

pr_err("unable to register input_dev class\n");

drivers/input/input.c

2733

pr_err("unable to register char major %d", INPUT_MAJOR);

drivers/input/input.c

996

pr_err("failed to attach handler %s to device %s, error: %d\n",

drivers/input/joydev.c

920

pr_err("failed to reserve new minor: %d\n", error);

drivers/input/joystick/gamecon.c

1029

pr_err("at least one device must be specified\n");

drivers/input/joystick/gamecon.c

803

pr_err("Pad type %d unknown\n", pad_type);

drivers/input/joystick/gamecon.c

809

pr_err("Not enough memory for input device\n");

drivers/input/joystick/gamecon.c

947

pr_err("parport busy already - lp.o loaded?\n");

drivers/input/joystick/gamecon.c

953

pr_err("Not enough memory\n");

drivers/input/joystick/gamecon.c

973

pr_err("No valid devices specified\n");

drivers/input/joystick/turbografx.c

169

pr_err("parport busy already - lp.o loaded?\n");

drivers/input/joystick/walkera0701.c

210

pr_err("parport %d does not have interrupt assigned\n",

drivers/input/joystick/walkera0701.c

226

pr_err("failed to register parport device\n");

drivers/input/joystick/walkera0701.c

231

pr_err("failed to negotiate parport mode\n");

drivers/input/joystick/walkera0701.c

239

pr_err("failed to allocate input device\n");

drivers/input/joystick/walkera0701.c

267

pr_err("failed to register input device\n");

drivers/input/keyboard/imx-sm-bbm-key.c

100

pr_err("Unexpected BBM event: %s\n", __func__);

drivers/input/keyboard/imx-sm-bbm-key.c

41

pr_err("%s: %d\n", __func__, ret);

drivers/input/misc/atlas_btns.c

101

pr_err("error installing addr spc handler\n");

drivers/input/misc/atlas_btns.c

116

pr_err("error removing addr spc handler\n");

drivers/input/misc/atlas_btns.c

68

pr_err("unable to allocate input device\n");

drivers/input/misc/atlas_btns.c

91

pr_err("couldn't register input device\n");

drivers/input/misc/ideapad_slidebar.c

295

pr_err("DMI does not match\n");

drivers/input/misc/ideapad_slidebar.c

301

pr_err("Not enough memory\n");

drivers/input/misc/ideapad_slidebar.c

309

pr_err("Failed to register platform device\n");

drivers/input/misc/ideapad_slidebar.c

315

pr_err("Failed to register platform driver\n");

drivers/input/misc/pmic8xxx-pwrkey.c

199

pr_err("%s: regulator already disabled\n", __func__);

drivers/input/mouse/psmouse-base.c

2046

pr_err("failed to create kpsmoused workqueue\n");

drivers/input/mouse/psmouse-smbus.c

308

pr_err("failed to register i2c bus notifier: %d\n", error);

drivers/input/mousedev.c

831

pr_err("failed to reserve mixdev minor: %d\n", minor);

drivers/input/mousedev.c

836

pr_err("failed to reserve new minor: %d\n", minor);

drivers/input/rmi4/rmi_bus.c

313

pr_err("driver_register() failed for %s, error: %d\n",

drivers/input/rmi4/rmi_bus.c

408

pr_err("%s: error registering the RMI F%02x handler: %d\n",

drivers/input/rmi4/rmi_bus.c

445

pr_err("%s: error registering the RMI bus: %d\n",

drivers/input/rmi4/rmi_bus.c

456

pr_err("%s: error registering the RMI physical driver: %d\n",

drivers/input/rmi4/rmi_driver.c

1273

pr_err("%s: driver register failed, code=%d.\n", __func__,

drivers/input/rmi4/rmi_f11.c

614

pr_err("Invalid finger state[%d]: 0x%02x", i,

drivers/input/serio/i8042.c

1005

pr_err("Can't read CTR while initializing i8042\n");

drivers/input/serio/i8042.c

1056

pr_err("Can't write CTR while initializing i8042\n");

drivers/input/serio/i8042.c

1195

pr_err("CTR write retry failed\n");

drivers/input/serio/i8042.c

404

pr_err("Can't reactivate %s port\n", port_name);

drivers/input/serio/i8042.c

625

pr_err("Failed to enable KBD port\n");

drivers/input/serio/i8042.c

644

pr_err("Failed to enable AUX port\n");

drivers/input/serio/i8042.c

736

pr_err("Failed to disable AUX port, can't use MUX\n");

drivers/input/serio/i8042.c

953

pr_err("i8042 controller selftest timeout\n");

drivers/input/serio/i8042.c

975

pr_err("i8042 controller selftest failed\n");

drivers/input/serio/i8042.c

997

pr_err("Unable to get stable CTR read\n");

drivers/input/serio/serio.c

249

pr_err("Not enough memory to queue event %d\n", event_type);

drivers/input/serio/serio.c

800

pr_err("driver_register() failed for %s, error: %d\n",

drivers/input/serio/serio.c

998

pr_err("Failed to register serio bus, error: %d\n", error);

drivers/interconnect/bulk.c

70

pr_err("icc_set_bw() failed on path %s (%d)\n", paths[i].name, ret);

drivers/interconnect/bulk.c

93

pr_err("icc_enable() failed on path %s (%d)\n", paths[i].name, ret);

drivers/interconnect/core.c

359

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/interconnect/core.c

798

pr_err("%s: error (%d)\n", __func__, ret);

drivers/interconnect/debugfs-client.c

148

pr_err("%s: failed to add platform device: %d\n", __func__, ret);

drivers/interconnect/qcom/bcm-voter.c

318

pr_err("Error sending AMC RPMH requests (%d)\n", ret);

drivers/interconnect/qcom/bcm-voter.c

349

pr_err("Error sending WAKE RPMH requests (%d)\n", ret);

drivers/interconnect/qcom/bcm-voter.c

357

pr_err("Error sending SLEEP RPMH requests (%d)\n", ret);

drivers/interconnect/qcom/icc-rpm.c

224

pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",

drivers/interconnect/qcom/icc-rpm.c

236

pr_err("qcom_icc_rpm_smd_send slv %d error %d\n",

drivers/iommu/amd/init.c

1158

pr_err("The device table size of IOMMU:%d is not expected!\n",

drivers/iommu/amd/init.c

1171

pr_err("The address of old device table is above 4G, not trustworthy!\n");

drivers/iommu/amd/init.c

1180

pr_err("Failed to remap memory for reusing old device table!\n");

drivers/iommu/amd/init.c

1474

pr_err("Unsupported IVHD type %#x\n", h->type);

drivers/iommu/amd/init.c

1635

pr_err(FW_BUG "Invalid IVHD device type %#x\n",

drivers/iommu/amd/init.c

1645

pr_err(FW_BUG "Invalid HID.\n");

drivers/iommu/amd/init.c

2317

pr_err("IOMMU%d: Failed to initialize IOMMU Hardware (error=%d)!\n",

drivers/iommu/amd/init.c

283

pr_err(FW_BUG

drivers/iommu/amd/init.c

2924

pr_err("Failed to reuse DEV table from previous kernel.\n");

drivers/iommu/amd/init.c

3121

pr_err("%s: IOAPIC[%d] not in IVRS table\n",

drivers/iommu/amd/init.c

3139

pr_err("%s: No southbridge IOAPIC found\n", fw_bug);

drivers/iommu/amd/init.c

3143

pr_err("Disabling interrupt remapping\n");

drivers/iommu/amd/init.c

3201

pr_err("IVRS table error: %s\n", err);

drivers/iommu/amd/init.c

3206

pr_err("Failed to initialize. The CMPXCHG16B feature is required.\n");

drivers/iommu/amd/init.c

3331

pr_err("IVRS table error: %s\n", err);

drivers/iommu/amd/init.c

3714

pr_err("Invalid command line: ivrs_ioapic%s\n", str);

drivers/iommu/amd/init.c

3719

pr_err("Early IOAPIC map overflow - ignoring ivrs_ioapic%s\n",

drivers/iommu/amd/init.c

3752

pr_err("Invalid command line: ivrs_hpet%s\n", str);

drivers/iommu/amd/init.c

3757

pr_err("Early HPET map overflow - ignoring ivrs_hpet%s\n",

drivers/iommu/amd/init.c

3816

pr_err("Invalid command line: ivrs_acpihid%s\n", str);

drivers/iommu/amd/init.c

3825

pr_err("Invalid command line: hid or uid\n");

drivers/iommu/amd/init.c

3837

pr_err("Invalid command line: hid is too long\n");

drivers/iommu/amd/init.c

3840

pr_err("Invalid command line: uid is too long\n");

drivers/iommu/amd/init.c

480

pr_err("Can not reserve memory region %llx-%llx for mmio\n",

drivers/iommu/amd/init.c

482

pr_err("This is a BIOS bug. Please contact your hardware vendor\n");

drivers/iommu/amd/init.c

550

pr_err("Unsupported IVHD type %#x\n", h->type);

drivers/iommu/amd/init.c

591

pr_err(FW_BUG "IVRS invalid checksum\n");

drivers/iommu/amd/iommu.c

1071

pr_err("GA log notifier failed.\n");

drivers/iommu/amd/iommu.c

1186

pr_err("CMD Buffer head=%llu tail=%llu\n", MMIO_CMD_BUFFER_HEAD(head),

drivers/iommu/amd/iommu.c

1191

pr_err("%3d: %08x %08x %08x %08x\n", i, cmd->data[0], cmd->data[1], cmd->data[2],

drivers/iommu/amd/iommu.c

1396

pr_err("Command buffer timeout\n");

drivers/iommu/amd/iommu.c

424

pr_err("%s : Failed to get dev_data for 0x%x\n", __func__, devid);

drivers/iommu/amd/iommu.c

433

pr_err("%s : Failed to get alias dev_data for 0x%x\n", __func__, alias);

drivers/iommu/amd/iommu.c

769

pr_err("DTE[%d]: %016llx\n", i, dte.data[i]);

drivers/iommu/amd/iommu.c

778

pr_err("CMD[%d]: %08x\n", i, cmd->data[i]);

drivers/iommu/amd/iommu.c

924

pr_err("No event written to event log\n");

drivers/iommu/exynos-iommu.c

1271

pr_err("%s: Failed(%d) to map %#zx bytes @ %#x\n",

drivers/iommu/exynos-iommu.c

1369

pr_err("%s: Failed: size(%#zx) @ %#x is smaller than page size %#zx\n",

drivers/iommu/exynos-iommu.c

1506

pr_err("%s: Failed to create kmem cache\n", __func__);

drivers/iommu/exynos-iommu.c

1512

pr_err("%s: Failed to allocate zero level2 page table\n",

drivers/iommu/exynos-iommu.c

1520

pr_err("%s: Failed to register driver\n", __func__);

drivers/iommu/fsl_pamu.c

960

pr_err("could not find a PAMU node\n");

drivers/iommu/fsl_pamu.c

966

pr_err("could not register driver (err=%i)\n", ret);

drivers/iommu/fsl_pamu.c

972

pr_err("could not allocate device %pOF\n", np);

drivers/iommu/fsl_pamu.c

984

pr_err("could not add device %pOF (err=%i)\n", np, ret);

drivers/iommu/fsl_pamu_domain.c

458

pr_err("Can't register iommu device\n");

drivers/iommu/intel/dmar.c

1004

pr_err("Can't reserve memory\n");

drivers/iommu/intel/dmar.c

1010

pr_err("Can't map the region\n");

drivers/iommu/intel/dmar.c

1056

pr_err("Failed to allocate seq_id\n");

drivers/iommu/intel/dmar.c

1064

pr_err("Failed to map %s\n", iommu->name);

drivers/iommu/intel/dmar.c

1078

pr_err("Cannot get a valid agaw for iommu (seq_id = %d)\n",

drivers/iommu/intel/dmar.c

1086

pr_err("Cannot get a valid max agaw for iommu (seq_id = %d)\n",

drivers/iommu/intel/dmar.c

1247

pr_err("VT-d detected Invalidation Queue Error: Reason %llx",

drivers/iommu/intel/dmar.c

1250

pr_err("VT-d detected Invalidation Time-out Error: SID %llx",

drivers/iommu/intel/dmar.c

1253

pr_err("VT-d detected Invalidation Completion Error: SID %llx",

drivers/iommu/intel/dmar.c

1256

pr_err("QI HEAD: %s qw0 = 0x%llx, qw1 = 0x%llx\n",

drivers/iommu/intel/dmar.c

1265

pr_err("QI PRIOR: %s qw0 = 0x%llx, qw1 = 0x%llx\n",

drivers/iommu/intel/dmar.c

1565

pr_err("Invalid input npages = %ld\n", npages);

drivers/iommu/intel/dmar.c

1908

pr_err("[INTR-REMAP] Request device [%02x:%02x.%d] fault index 0x%llx [fault reason 0x%02x] %s\n",

drivers/iommu/intel/dmar.c

1917

pr_err("[%s NO_PASID] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",

drivers/iommu/intel/dmar.c

1923

pr_err("[%s PASID 0x%x] Request device [%02x:%02x.%d] fault addr 0x%llx [fault reason 0x%02x] %s\n",

drivers/iommu/intel/dmar.c

1948

pr_err("DRHD: handling fault status reg %x\n", fault_status);

drivers/iommu/intel/dmar.c

2028

pr_err("No free IRQ vectors\n");

drivers/iommu/intel/dmar.c

2034

pr_err("Can't request irq\n");

drivers/iommu/intel/dmar.c

2057

pr_err("DRHD %Lx: failed to enable fault, interrupt, ret %d\n",

drivers/iommu/intel/dmar.c

788

pr_err("Failed to find handle for ACPI object %s\n",

drivers/iommu/intel/dmar.c

794

pr_err("Failed to get device for ACPI object %s\n",

drivers/iommu/intel/dmar.c

973

pr_err("Can't reserve memory\n");

drivers/iommu/intel/dmar.c

980

pr_err("Can't map the region\n");

drivers/iommu/intel/iommu.c

1048

pr_err("%s: No free domain ids\n", iommu->name);

drivers/iommu/intel/iommu.c

1572

pr_err("%s: Failed to copy context table for bus %d\n",

drivers/iommu/intel/iommu.c

1668

pr_err("Failed to copy translation tables from previous kernel for %s\n",

drivers/iommu/intel/iommu.c

2629

pr_err("Initialization failed\n");

drivers/iommu/intel/iommu.c

678

pr_err("Allocating root entry for %s failed\n",

drivers/iommu/intel/iommu.c

820

pr_err("Flush IOTLB failed\n");

drivers/iommu/intel/irq_remapping.c

121

pr_err("Requested mask %x exceeds the max invalidation handle"

drivers/iommu/intel/irq_remapping.c

1562

pr_err("Failed to setup irq remapping for %s\n",

drivers/iommu/intel/irq_remapping.c

544

pr_err("IR%d: failed to allocate 1M of pages\n", iommu->seq_id);

drivers/iommu/intel/irq_remapping.c

550

pr_err("IR%d: failed to allocate bitmap\n", iommu->seq_id);

drivers/iommu/intel/irq_remapping.c

560

pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);

drivers/iommu/intel/irq_remapping.c

580

pr_err("Failed to enable queued invalidation\n");

drivers/iommu/intel/irq_remapping.c

594

pr_err("Failed to copy IR table for %s from previous kernel\n",

drivers/iommu/intel/irq_remapping.c

755

pr_err("Failed to setup irq remapping for %s\n",

drivers/iommu/intel/irq_remapping.c

985

pr_err(FW_BUG "ioapic %d has no mapping iommu, "

drivers/iommu/intel/pasid.c

388

pr_err("No first level translation support on %s\n",

drivers/iommu/intel/pasid.c

394

pr_err("No 5-level paging support for first-level on %s\n",

drivers/iommu/intel/pasid.c

459

pr_err("No second level translation support on %s\n",

drivers/iommu/intel/perfmon.c

777

pr_err("Failed to register PMU for iommu (seq_id = %d)\n", iommu->seq_id);

drivers/iommu/intel/prq.c

142

pr_err("%s: Invalid page request: %08llx %08llx\n",

drivers/iommu/intel/prq.c

219

pr_err("IOMMU: %s: Address is not canonical\n",

drivers/iommu/intel/prq.c

227

pr_err("IOMMU: %s: Page request in Privilege Mode\n",

drivers/iommu/intel/prq.c

233

pr_err("IOMMU: %s: Execution request not supported\n",

drivers/iommu/intel/prq.c

302

pr_err("IOMMU: %s: Failed to create IRQ vector for page request queue\n",

drivers/iommu/intel/prq.c

313

pr_err("IOMMU: %s: Failed to allocate iopf queue\n", iommu->name);

drivers/iommu/intel/prq.c

324

pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n",

drivers/iommu/intel/svm.c

35

pr_err("%s SVM disabled, incompatible 1GB page capability\n",

drivers/iommu/intel/svm.c

42

pr_err("%s SVM disabled, incompatible paging mode\n",

drivers/iommu/io-pgtable-arm-v7s.c

832

pr_err("selftest: failed to allocate io pgtable ops\n");

drivers/iommu/iommu.c

2607

pr_err("unaligned: iova 0x%lx pa %pa size 0x%zx min_pagesz 0x%x\n",

drivers/iommu/iommu.c

2697

pr_err("unaligned: iova 0x%lx size 0x%zx min_pagesz 0x%x\n",

drivers/iommu/iova.c

972

pr_err("IOVA: Couldn't register cpuhp handler: %pe\n", ERR_PTR(err));

drivers/iommu/msm_iommu.c

578

pr_err("FAR = %08x PAR = %08x\n",

drivers/iommu/msm_iommu.c

580

pr_err("FSR = %08x [%s%s%s%s%s%s%s%s%s%s]\n", fsr,

drivers/iommu/msm_iommu.c

592

pr_err("FSYNR0 = %08x FSYNR1 = %08x\n",

drivers/iommu/msm_iommu.c

594

pr_err("TTBR0 = %08x TTBR1 = %08x\n",

drivers/iommu/msm_iommu.c

596

pr_err("SCTLR = %08x ACTLR = %08x\n",

drivers/iommu/msm_iommu.c

665

pr_err("Invalid device ID in context interrupt handler\n");

drivers/iommu/msm_iommu.c

669

pr_err("Unexpected IOMMU page fault!\n");

drivers/iommu/msm_iommu.c

670

pr_err("base = %08x\n", (unsigned int)iommu->base);

drivers/iommu/msm_iommu.c

679

pr_err("Fault occurred in context %d.\n", i);

drivers/iommu/msm_iommu.c

680

pr_err("Interesting registers:\n");

drivers/iommu/msm_iommu.c

767

pr_err("Invalid PAR value detected\n");

drivers/iommu/msm_iommu.c

777

pr_err("Request IRQ %d failed with ret=%d\n", iommu->irq, ret);

drivers/iommu/msm_iommu.c

786

pr_err("Could not add msm-smmu at %pa to sysfs\n", &ioaddr);

drivers/iommu/msm_iommu.c

792

pr_err("Could not register msm-smmu at %pa\n", &ioaddr);

drivers/iommu/omap-iommu.c

1156

pr_err("%s: only DT-based devices are supported\n", __func__);

drivers/iommu/omap-iommu.c

1755

pr_err("%s: failed to register driver\n", __func__);

drivers/iommu/rockchip-iommu.c

816

pr_err("iova: %pad already mapped to %pa cannot remap to phys: %pa prot: %#x\n",

drivers/iommu/sprd-iommu.c

301

pr_err("No sprd_iommu_device attached to the domain\n");

drivers/irqchip/exynos-combiner.c

261

pr_err("%s: failed to map combiner registers\n", __func__);

drivers/irqchip/irq-aclint-sswi.c

114

pr_err("%pfwP: Failed to map MMIO region\n", fwnode);

drivers/irqchip/irq-aclint-sswi.c

130

pr_err("%pfwP: Failed to find INTC domain\n", fwnode);

drivers/irqchip/irq-aclint-sswi.c

136

pr_err("unable to create ACLINT SSWI IRQ mapping\n");

drivers/irqchip/irq-aclint-sswi.c

143

pr_err("unable to create muxed IPIs\n");

drivers/irqchip/irq-aclint-sswi.c

67

pr_err("%pfwP: no ACLINT SSWI context available\n", fwnode);

drivers/irqchip/irq-al-fic.c

139

pr_err("fail to add irq domain\n");

drivers/irqchip/irq-al-fic.c

149

pr_err("fail to allocate generic chip (%d)\n", ret);

drivers/irqchip/irq-al-fic.c

215

pr_err("fail to register irqchip\n");

drivers/irqchip/irq-al-fic.c

238

pr_err("%s: unsupported - device require a parent\n",

drivers/irqchip/irq-al-fic.c

245

pr_err("%s: fail to map memory\n", node->name);

drivers/irqchip/irq-al-fic.c

251

pr_err("%s: fail to map irq\n", node->name);

drivers/irqchip/irq-al-fic.c

261

pr_err("%s: fail to initialize irqchip (%lu)\n",

drivers/irqchip/irq-alpine-msi.c

175

pr_err("Failed to find the GIC node\n");

drivers/irqchip/irq-alpine-msi.c

182

pr_err("Failed to find the GIC domain\n");

drivers/irqchip/irq-alpine-msi.c

187

pr_err("Failed to create MSI domain\n");

drivers/irqchip/irq-alpine-msi.c

206

pr_err("Failed to allocate resource\n");

drivers/irqchip/irq-alpine-msi.c

221

pr_err("Unable to parse MSI base\n");

drivers/irqchip/irq-alpine-msi.c

226

pr_err("Unable to parse MSI numbers\n");

drivers/irqchip/irq-armada-370-xp.c

827

pr_err("%pOF: Unable to map resource %d: %pE\n", np, index, ERR_PTR(err));

drivers/irqchip/irq-armada-370-xp.c

872

pr_err("%pOF: Unable to add IRQ domain\n", node);

drivers/irqchip/irq-armada-370-xp.c

884

pr_err("%pOF: Unable to initialize MSI domain\n", node);

drivers/irqchip/irq-armada-370-xp.c

894

pr_err("%pOF: Unable to initialize IPI domain\n", node);

drivers/irqchip/irq-aspeed-intc.c

119

pr_err("Failed to get irq number\n");

drivers/irqchip/irq-aspeed-intc.c

98

pr_err("Failed to iomap intc_ic base\n");

drivers/irqchip/irq-ath79-misc.c

142

pr_err("Failed to get MISC IRQ\n");

drivers/irqchip/irq-ath79-misc.c

148

pr_err("Failed to get MISC IRQ registers\n");

drivers/irqchip/irq-ath79-misc.c

155

pr_err("Failed to add MISC irqdomain\n");

drivers/irqchip/irq-bcm2835.c

168

pr_err(FW_BUG "Bootloader left irq enabled: "

drivers/irqchip/irq-bcm2835.c

176

pr_err(FW_BUG "Bootloader left fiq enabled\n");

drivers/irqchip/irq-bcm6345-l1.c

251

pr_err("failed to request intc memory");

drivers/irqchip/irq-bcm6345-l1.c

260

pr_err("failed to map parent interrupt %d\n", cpu->parent_irq);

drivers/irqchip/irq-bcm6345-l1.c

305

pr_err("failed to init intc L1 for cpu %d: %d\n",

drivers/irqchip/irq-bcm7038-l1.c

241

pr_err("invalid brcm,int-fwd-mask property\n");

drivers/irqchip/irq-bcm7038-l1.c

263

pr_err("failed to map parent interrupt %d\n", parent_irq);

drivers/irqchip/irq-bcm7038-l1.c

410

pr_err("failed to remap intc L1 registers\n");

drivers/irqchip/irq-bcm7120-l2.c

112

pr_err("failed to map interrupt %d\n", irq);

drivers/irqchip/irq-bcm7120-l2.c

152

pr_err("unable to map registers\n");

drivers/irqchip/irq-bcm7120-l2.c

165

pr_err("invalid brcm,int-fwd-mask property\n");

drivers/irqchip/irq-bcm7120-l2.c

172

pr_err("invalid brcm,int-map-mask property\n");

drivers/irqchip/irq-bcm7120-l2.c

201

pr_err("unable to map registers\n");

drivers/irqchip/irq-bcm7120-l2.c

229

pr_err("invalid number of parent interrupts\n");

drivers/irqchip/irq-bcm7120-l2.c

270

pr_err("failed to allocate generic irq chip\n");

drivers/irqchip/irq-brcmstb-l2.c

160

pr_err("failed to remap intc L2 registers\n");

drivers/irqchip/irq-brcmstb-l2.c

175

pr_err("failed to find parent interrupt\n");

drivers/irqchip/irq-brcmstb-l2.c

201

pr_err("failed to allocate generic irq chip\n");

drivers/irqchip/irq-crossbar.c

214

pr_err("missing 'ti,max-crossbar-sources' property\n");

drivers/irqchip/irq-crossbar.c

221

pr_err("missing 'ti,max-irqs' property\n");

drivers/irqchip/irq-crossbar.c

244

pr_err("Invalid reserved entry\n");

drivers/irqchip/irq-crossbar.c

262

pr_err("Invalid skip entry\n");

drivers/irqchip/irq-crossbar.c

288

pr_err("Invalid reg-size property\n");

drivers/irqchip/irq-crossbar.c

340

pr_err("%pOF: no parent, giving up\n", node);

drivers/irqchip/irq-crossbar.c

346

pr_err("%pOF: unable to obtain parent domain\n", node);

drivers/irqchip/irq-crossbar.c

357

pr_err("%pOF: failed to allocated domain\n", node);

drivers/irqchip/irq-csky-apb-intc.c

106

pr_err("C-SKY Intc not a root irq controller\n");

drivers/irqchip/irq-csky-apb-intc.c

112

pr_err("C-SKY Intc unable to map: %p.\n", node);

drivers/irqchip/irq-csky-apb-intc.c

119

pr_err("C-SKY Intc irq_domain_add failed.\n");

drivers/irqchip/irq-csky-apb-intc.c

127

pr_err("C-SKY Intc irq_alloc_gc failed.\n");

drivers/irqchip/irq-davinci-cp-intc.c

165

pr_err("%s: register range busy\n", __func__);

drivers/irqchip/irq-davinci-cp-intc.c

171

pr_err("%s: unable to ioremap register range\n", __func__);

drivers/irqchip/irq-davinci-cp-intc.c

203

pr_err("%s: unable to allocate interrupt descriptors: %d\n", __func__, irq_base);

drivers/irqchip/irq-davinci-cp-intc.c

213

pr_err("%s: unable to create an interrupt domain\n", __func__);

drivers/irqchip/irq-davinci-cp-intc.c

234

pr_err("%s: unable to get the register range from device-tree\n", __func__);

drivers/irqchip/irq-davinci-cp-intc.c

240

pr_err("%s: unable to read the 'ti,intc-size' property\n", __func__);

drivers/irqchip/irq-digicolor.c

100

pr_err("%pOF: unable to create IRQ domain\n", node);

drivers/irqchip/irq-digicolor.c

108

pr_err("%pOF: unable to allocate IRQ gc\n", node);

drivers/irqchip/irq-digicolor.c

81

pr_err("%pOF: unable to map IC registers\n", node);

drivers/irqchip/irq-digicolor.c

91

pr_err("%pOF: unable to map UC registers\n", node);

drivers/irqchip/irq-dw-apb-ictl.c

132

pr_err("%pOF: unable to parse irq\n", np);

drivers/irqchip/irq-dw-apb-ictl.c

140

pr_err("%pOF: unable to get resource\n", np);

drivers/irqchip/irq-dw-apb-ictl.c

145

pr_err("%pOF: unable to request mem region\n", np);

drivers/irqchip/irq-dw-apb-ictl.c

151

pr_err("%pOF: unable to map resource\n", np);

drivers/irqchip/irq-dw-apb-ictl.c

177

pr_err("%pOF: unable to add irq domain\n", np);

drivers/irqchip/irq-dw-apb-ictl.c

186

pr_err("%pOF: unable to alloc irq domain gc\n", np);

drivers/irqchip/irq-econet-en751221.c

160

pr_err("%s: hwirq %lu out of range\n", __func__, hwirq);

drivers/irqchip/irq-econet-en751221.c

163

pr_err("%s: can't map hwirq %lu, it is a shadow interrupt\n", __func__, hwirq);

drivers/irqchip/irq-econet-en751221.c

205

pr_err("%pOF: %s count is odd, ignoring\n", node, field);

drivers/irqchip/irq-econet-en751221.c

214

pr_err("%pOF: Failed to read %s\n", node, field);

drivers/irqchip/irq-econet-en751221.c

223

pr_err("%pOF: %s[%d] shadow(%d) out of range\n",

drivers/irqchip/irq-econet-en751221.c

229

pr_err("%pOF: %s[%d] target(%d) out of range\n", node, field, i, target);

drivers/irqchip/irq-econet-en751221.c

234

pr_err("%pOF: %s[%d] target(%d) already has a shadow\n",

drivers/irqchip/irq-econet-en751221.c

240

pr_err("%pOF: %s[%d] shadow(%d) already has a target\n",

drivers/irqchip/irq-econet-en751221.c

264

pr_err("%pOF: DT: Failed to get IRQ from 'interrupts'\n", node);

drivers/irqchip/irq-econet-en751221.c

269

pr_err("%pOF: DT: Failed to get 'reg'\n", node);

drivers/irqchip/irq-econet-en751221.c

275

pr_err("%pOF: Failed to request memory\n", node);

drivers/irqchip/irq-econet-en751221.c

282

pr_err("%pOF: Failed to remap membase\n", node);

drivers/irqchip/irq-econet-en751221.c

292

pr_err("%pOF: Failed to add irqdomain\n", node);

drivers/irqchip/irq-gic-realview.c

71

pr_err("RealView GIC setup: could not find syscon\n");

drivers/irqchip/irq-gic-v2m.c

220

pr_err("Invalid MSI base SPI (base:%u)\n", base);

drivers/irqchip/irq-gic-v2m.c

225

pr_err("Number of SPIs (%u) exceed maximum (%u)\n",

drivers/irqchip/irq-gic-v2m.c

283

pr_err("Failed to create GICv2m domain\n");

drivers/irqchip/irq-gic-v2m.c

308

pr_err("Failed to map GICv2m resource\n");

drivers/irqchip/irq-gic-v2m.c

401

pr_err("Failed to allocate v2m resource.\n");

drivers/irqchip/irq-gic-v2m.c

499

pr_err("Unable to allocate GICv2m domain token\n");

drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c

122

pr_err("%s: Unable to locate ITS domain handle\n", node_name);

drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c

91

pr_err("%s: unable to locate ITS domain\n", name);

drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c

99

pr_err("%s: unable to create fsl-mc domain\n", name);

drivers/irqchip/irq-gic-v3-its.c

2339

pr_err("Failed to allocate PROPBASE\n");

drivers/irqchip/irq-gic-v3-its.c

2414

pr_err("ITS: no 52bit PA support when psz=%d\n", psz);

drivers/irqchip/irq-gic-v3-its.c

2468

pr_err("ITS@%pa: %s doesn't stick: %llx %llx\n",

drivers/irqchip/irq-gic-v3-its.c

3103

pr_err("Failed to allocate PENDBASE for CPU%d\n", cpu);

drivers/irqchip/irq-gic-v3-its.c

5011

pr_err("ITS@%pa: failed to quiesce: %d\n",

drivers/irqchip/irq-gic-v3-its.c

5057

pr_err("ITS@%pa: failed to quiesce on resume: %d\n",

drivers/irqchip/irq-gic-v3-its.c

5184

pr_err("ITS: Can't allocate GICv4 proxy device\n");

drivers/irqchip/irq-gic-v3-its.c

5211

pr_err("ITS@%pa: No ITSList entry available!\n",

drivers/irqchip/irq-gic-v3-its.c

5227

pr_err("ITS@%pa: Duplicate ITSList entry %d\n",

drivers/irqchip/irq-gic-v3-its.c

5345

pr_err("ITS@%pa: failed probing (%d)\n", &its->phys_base, err);

drivers/irqchip/irq-gic-v3-its.c

5401

pr_err("CPU%d: Timeout while disabling LPIs\n",

drivers/irqchip/irq-gic-v3-its.c

5415

pr_err("CPU%d: Failed to disable LPIs\n", smp_processor_id());

drivers/irqchip/irq-gic-v3-its.c

5648

pr_err("SRAT: Invalid header length %d in ITS affinity\n",

drivers/irqchip/irq-gic-v3-its.c

5661

pr_err("SRAT: Invalid NUMA node %d in ITS affinity\n", node);

drivers/irqchip/irq-gic-v3-its.c

5723

pr_err("ITS@%pa: Unable to allocate GICv3 ITS domain token\n",

drivers/irqchip/irq-gic-v3-its.c

5731

pr_err("ITS@%pa: Unable to register GICv3 ITS domain token (ITS ID %d) to IORT\n",

drivers/irqchip/irq-gic-v3-its.c

5868

pr_err("ITS: Disabling GICv4 support\n");

drivers/irqchip/irq-gic-v3.c

1149

pr_err("GIC: unable to set SRE (disabled at EL2), panic ahead\n");

drivers/irqchip/irq-gic-v3.c

1638

pr_err(FW_BUG "Illegal GSI%d translation request\n",

drivers/irqchip/irq-gic-v3.c

2034

pr_err("Failed to initialize MBIs\n");

drivers/irqchip/irq-gic-v3.c

2206

pr_err("%pOF: unable to map gic dist registers\n", node);

drivers/irqchip/irq-gic-v3.c

2214

pr_err("%pOF: no distributor detected, giving up\n", node);

drivers/irqchip/irq-gic-v3.c

2230

pr_err("%pOF: couldn't map region %d\n", node, i);

drivers/irqchip/irq-gic-v3.c

2299

pr_err("Couldn't map GICR region @%llx\n", redist->base_address);

drivers/irqchip/irq-gic-v3.c

2548

pr_err("Unable to map GICD registers\n");

drivers/irqchip/irq-gic-v3.c

2555

pr_err("No distributor detected at @%p, giving up\n",

drivers/irqchip/irq-gic-v3.c

605

pr_err("Cannot set NMI property of enabled IRQ %u\n", d->irq);

drivers/irqchip/irq-gic-v3.c

633

pr_err("Cannot set NMI property of enabled IRQ %u\n", d->irq);

drivers/irqchip/irq-gic-v4.c

388

pr_err("ITS: No GICv4 VPE domain allocated\n");

drivers/irqchip/irq-gic-v5-irs.c

302

pr_err("IST is marked as valid already; cannot allocate\n");

drivers/irqchip/irq-gic-v5-irs.c

378

pr_err("IAFFID for CPU %d has not been initialised\n", cpuid);

drivers/irqchip/irq-gic-v5-irs.c

516

pr_err("IAFFID for CPU %d has not been initialised\n", cpuid);

drivers/irqchip/irq-gic-v5-irs.c

522

pr_err("No IRS associated with CPU %u\n", cpuid);

drivers/irqchip/irq-gic-v5-irs.c

531

pr_err("IAFFID 0x%x used in IRS_PE_SELR is invalid\n", iaffid);

drivers/irqchip/irq-gic-v5-irs.c

738

pr_err("%pOF: ns-config reg-name not present\n", node);

drivers/irqchip/irq-gic-v5-irs.c

744

pr_err("%pOF: unable to map GICv5 IRS registers\n", node);

drivers/irqchip/irq-gic-v5-irs.c

757

pr_err("Failed to parse CPU IAFFIDs from the device tree!\n");

drivers/irqchip/irq-gic-v5-irs.c

808

pr_err("Failed to init IST\n");

drivers/irqchip/irq-gic-v5-irs.c

837

pr_err("Failed to init IRS %s\n", np->full_name);

drivers/irqchip/irq-gic-v5-irs.c

931

pr_err("Unable to map GIC IRS registers\n");

drivers/irqchip/irq-gic-v5-its.c

1202

pr_err("%pOF: ns-config reg-name not present\n", node);

drivers/irqchip/irq-gic-v5-its.c

1208

pr_err("%pOF: unable to map GICv5 ITS_CONFIG_FRAME\n", node);

drivers/irqchip/irq-gic-v5-its.c

1234

pr_err("Failed to init ITS %s\n", np->full_name);

drivers/irqchip/irq-gic-v5-its.c

1263

pr_err("ITS@%pa: Unable to allocate GICv5 ITS translate domain token\n",

drivers/irqchip/irq-gic-v5-its.c

1271

pr_err("ITS@%pa: Unable to register GICv5 ITS domain token (ITS TRANSLATE FRAME ID %d) to IORT\n",

drivers/irqchip/irq-gic-v5-its.c

1319

pr_err("ITS@%pa: Unable to allocate GICv5 ITS domain token\n",

drivers/irqchip/irq-gic-v5-its.c

473

pr_err("Supplied DeviceID (%u) outside of Device Table range (%u)!",

drivers/irqchip/irq-gic-v5-its.c

494

pr_err("Required EventID bits (%u) larger than supported bits (%u)!",

drivers/irqchip/irq-gic-v5-its.c

754

pr_err("A device with this DeviceID (0x%x) has already been registered.\n",

drivers/irqchip/irq-gic-v5-its.c

769

pr_err("Failed to register the device\n");

drivers/irqchip/irq-gic-v5-its.c

905

pr_err("EventID outside of ITT range; cannot allocate an ITT entry!\n");

drivers/irqchip/irq-gic-v5-iwb.c

48

pr_err("IWB_WENABLER<n> is invalid for n=%u\n", n);

drivers/irqchip/irq-gic-v5.c

1075

pr_err("Unexpected ICC_IDR0_EL1_PRI_BITS value, default to 4");

drivers/irqchip/irq-gic-v5.c

1093

pr_err("Unexpected ICC_IDR0_EL1_ID_BITS value, default to 16");

drivers/irqchip/irq-gic-v5.c

382

pr_err("ICSR_EL1 is invalid\n");

drivers/irqchip/irq-gic.c

1120

pr_err(FW_BUG "Illegal GSI%d translation request\n",

drivers/irqchip/irq-gic.c

1648

pr_err("No valid GICC entries exist\n");

drivers/irqchip/irq-gic.c

1654

pr_err("Unable to map GICC registers\n");

drivers/irqchip/irq-gic.c

1662

pr_err("Unable to map GICD registers\n");

drivers/irqchip/irq-gic.c

1680

pr_err("Unable to allocate domain handle\n");

drivers/irqchip/irq-gic.c

1687

pr_err("Failed to initialise GIC\n");

drivers/irqchip/irq-goldfish-pic.c

108

pr_err("Failed to add irqdomain!\n");

drivers/irqchip/irq-goldfish-pic.c

129

pr_err("Failed to initialize! (errno = %d)\n", ret);

drivers/irqchip/irq-goldfish-pic.c

72

pr_err("Failed to map parent IRQ!\n");

drivers/irqchip/irq-goldfish-pic.c

79

pr_err("Failed to map base address!\n");

drivers/irqchip/irq-goldfish-pic.c

90

pr_err("Failed to allocate chip structures!\n");

drivers/irqchip/irq-hip04.c

385

pr_err("failed to allocate IRQ numbers\n");

drivers/irqchip/irq-i8259.c

326

pr_err("Failed to register cascade interrupt\n");

drivers/irqchip/irq-i8259.c

356

pr_err("Failed to map i8259 parent IRQ\n");

drivers/irqchip/irq-idt3243x.c

118

pr_err("Failed to initialize! (errno = %d)\n", ret);

drivers/irqchip/irq-idt3243x.c

63

pr_err("Failed to map parent IRQ!\n");

drivers/irqchip/irq-idt3243x.c

70

pr_err("Failed to map base address!\n");

drivers/irqchip/irq-idt3243x.c

78

pr_err("Failed to add irqdomain!\n");

drivers/irqchip/irq-imx-gpcv2.c

216

pr_err("%pOF: no parent, giving up\n", node);

drivers/irqchip/irq-imx-gpcv2.c

222

pr_err("%pOF: unknown compatibility string\n", node);

drivers/irqchip/irq-imx-gpcv2.c

230

pr_err("%pOF: unable to get parent domain\n", node);

drivers/irqchip/irq-imx-gpcv2.c

242

pr_err("%pOF: unable to map gpc registers\n", node);

drivers/irqchip/irq-ingenic.c

129

pr_err("Failed to register SoC intc cascade interrupt\n");

drivers/irqchip/irq-jcore-aic.c

83

pr_err("Unable to map AIC for cpu %u\n", cpu);

drivers/irqchip/irq-lan966x-oic.c

108

pr_err("lan966x oic doesn't support flow type %d\n", flow_type);

drivers/irqchip/irq-loongarch-avec.c

361

pr_err("Unable to allocate domain handle\n");

drivers/irqchip/irq-loongarch-avec.c

369

pr_err("Unable to create IRQ domain\n");

drivers/irqchip/irq-loongarch-avec.c

376

pr_err("Failed to mapping hwirq\n");

drivers/irqchip/irq-loongarch-avec.c

383

pr_err("Failed to init irq matrix\n");

drivers/irqchip/irq-loongarch-avec.c

425

pr_err("Failed to init IRQ domain\n");

drivers/irqchip/irq-loongarch-avec.c

431

pr_err("Failed to init cascade IRQ domain\n");

drivers/irqchip/irq-loongson-eiointc.c

210

pr_err("Error: invalid nodemap!\n");

drivers/irqchip/irq-loongson-eiointc.c

523

pr_err("loongson-extioi: cannot add IRQ domain\n");

drivers/irqchip/irq-loongson-eiointc.c

594

pr_err("Unable to allocate domain handle\n");

drivers/irqchip/irq-loongson-htpic.c

110

pr_err("loongson-htpic: Failed to initialize i8259 IRQs\n");

drivers/irqchip/irq-loongson-htpic.c

125

pr_err("loongson-htpic: Failed to get parent irqs\n");

drivers/irqchip/irq-loongson-htpic.c

94

pr_err("loongson-htpic: Only one HTPIC is allowed in the system\n");

drivers/irqchip/irq-loongson-htvec.c

208

pr_err("loongson-htvec: cannot add IRQ domain\n");

drivers/irqchip/irq-loongson-htvec.c

312

pr_err("Unable to allocate domain handle\n");

drivers/irqchip/irq-loongson-liointc.c

245

pr_err("loongson-liointc: cannot add IRQ domain\n");

drivers/irqchip/irq-loongson-liointc.c

253

pr_err("loongson-liointc: unable to register IRQ domain\n");

drivers/irqchip/irq-loongson-liointc.c

356

pr_err("loongson-liointc: No parent_int_map\n");

drivers/irqchip/irq-loongson-liointc.c

409

pr_err("Unable to allocate domain handle\n");

drivers/irqchip/irq-loongson-pch-lpc.c

197

pr_err("Failed to get LPC status\n");

drivers/irqchip/irq-loongson-pch-lpc.c

203

pr_err("Unable to allocate domain handle\n");

drivers/irqchip/irq-loongson-pch-lpc.c

215

pr_err("Failed to create IRQ domain\n");

drivers/irqchip/irq-loongson-pch-msi.c

168

pr_err("Failed to create the MSI middle domain\n");

drivers/irqchip/irq-loongson-pch-msi.c

222

pr_err("Failed to find the parent domain\n");

drivers/irqchip/irq-loongson-pch-msi.c

227

pr_err("Failed to allocate resource\n");

drivers/irqchip/irq-loongson-pch-msi.c

232

pr_err("Unable to parse MSI vec base\n");

drivers/irqchip/irq-loongson-pch-msi.c

237

pr_err("Unable to parse MSI vec number\n");

drivers/irqchip/irq-loongson-pch-pic.c

207

pr_err("pch-pic domain has no free vectors\n");

drivers/irqchip/irq-loongson-pch-pic.c

354

pr_err("Failed to create IRQ domain\n");

drivers/irqchip/irq-loongson-pch-pic.c

389

pr_err("Failed to find the parent domain\n");

drivers/irqchip/irq-loongson-pch-pic.c

394

pr_err("Failed to determine pic-base-vec\n");

drivers/irqchip/irq-loongson-pch-pic.c

426

pr_err("ERROR: Unable to locate PCH_PIC for GSI %d\n", gsi);

drivers/irqchip/irq-loongson-pch-pic.c

460

pr_err("Unable to allocate domain handle\n");

drivers/irqchip/irq-lpc32xx.c

208

pr_err("%pOF: unable to map registers\n", node);

drivers/irqchip/irq-lpc32xx.c

216

pr_err("unable to add irq domain\n");

drivers/irqchip/irq-ls-scfg-msi.c

179

pr_err("failed to teardown msi. Invalid hwirq %d\n", pos);

drivers/irqchip/irq-ls1x.c

123

pr_err("ls1x-irq: unable to get parent irq\n");

drivers/irqchip/irq-ls1x.c

132

pr_err("ls1x-irq: cannot add IRQ domain\n");

drivers/irqchip/irq-ls1x.c

142

pr_err("ls1x-irq: unable to register IRQ domain\n");

drivers/irqchip/irq-mchp-eic.c

260

pr_err("%pOF: Failed to add domain\n", node);

drivers/irqchip/irq-meson-gpio.c

291

pr_err("No channel available\n");

drivers/irqchip/irq-meson-gpio.c

524

pr_err("failed to allocate gic irq %u\n", *channel_hwirq);

drivers/irqchip/irq-meson-gpio.c

577

pr_err("can't get %d channel interrupts\n", ctl->params->nr_channels);

drivers/irqchip/irq-meson-gpio.c

594

pr_err("missing parent interrupt node\n");

drivers/irqchip/irq-meson-gpio.c

600

pr_err("unable to obtain parent domain\n");

drivers/irqchip/irq-meson-gpio.c

626

pr_err("failed to add domain\n");

drivers/irqchip/irq-mips-gic.c

853

pr_err("Failed to add IPI domain");

drivers/irqchip/irq-mips-gic.c

919

pr_err("No CPU vectors available\n");

drivers/irqchip/irq-mips-gic.c

935

pr_err("Failed to get memory range\n");

drivers/irqchip/irq-mips-gic.c

951

pr_err("Failed to ioremap gic_base\n");

drivers/irqchip/irq-mips-gic.c

975

pr_err("Failed to add IRQ domain");

drivers/irqchip/irq-mmp.c

165

pr_err("Spurious irq %d in MMP INTC\n", irq);

drivers/irqchip/irq-mmp.c

253

pr_err("Not found mrvl,intc-nr-irqs property\n");

drivers/irqchip/irq-mmp.c

259

pr_err("Failed to get interrupt controller register\n");

drivers/irqchip/irq-mmp.c

270

pr_err("Failed to mapping hwirq\n");

drivers/irqchip/irq-mmp.c

331

pr_err("Failed to get interrupt controller register #2\n");

drivers/irqchip/irq-mmp.c

370

pr_err("Not found mrvl,intc-nr-irqs property\n");

drivers/irqchip/irq-mmp.c

384

pr_err("Not found reg property\n");

drivers/irqchip/irq-mmp.c

400

pr_err("Failed to mapping hwirq\n");

drivers/irqchip/irq-mscc-ocelot.c

137

pr_err("%pOFn: unable to add irq domain\n", node);

drivers/irqchip/irq-mscc-ocelot.c

145

pr_err("%pOFn: unable to alloc irq domain gc\n", node);

drivers/irqchip/irq-mscc-ocelot.c

152

pr_err("%pOFn: unable to map resource\n", node);

drivers/irqchip/irq-mst-intc.c

258

pr_err("mst-intc: interrupt-parent not found\n");

drivers/irqchip/irq-mtk-cirq.c

310

pr_err("mtk_cirq: interrupt-parent not found\n");

drivers/irqchip/irq-mtk-cirq.c

320

pr_err("mtk_cirq: unable to map cirq register\n");

drivers/irqchip/irq-mtk-sysirq.c

132

pr_err("mtk_sysirq: interrupt-parent not found\n");

drivers/irqchip/irq-mtk-sysirq.c

144

pr_err("mtk_sysirq: base address not specified\n");

drivers/irqchip/irq-mtk-sysirq.c

173

pr_err("%pOF: couldn't map region %d\n", node, i);

drivers/irqchip/irq-mvebu-odmi.c

111

pr_err("Cannot allocate parent IRQ\n");

drivers/irqchip/irq-mvebu-odmi.c

134

pr_err("Failed to teardown msi. Invalid hwirq %lu\n", d->hwirq);

drivers/irqchip/irq-mvebu-sei.c

443

pr_err("Failed to create CPs IRQ domain\n");

drivers/irqchip/irq-ompic.c

158

pr_err("ompic: duplicate ompic's are not supported");

drivers/irqchip/irq-ompic.c

163

pr_err("ompic: reg property requires an address and size");

drivers/irqchip/irq-ompic.c

168

pr_err("ompic: reg size, currently %d must be at least %d",

drivers/irqchip/irq-ompic.c

177

pr_err("ompic: unable to map registers");

drivers/irqchip/irq-ompic.c

183

pr_err("ompic: unable to parse device irq");

drivers/irqchip/irq-ompic.c

193

pr_err("ompic: failed to request irq %d, error: %d",

drivers/irqchip/irq-orion.c

152

pr_err("%pOFn: unable to add irq domain\n", np);

drivers/irqchip/irq-orion.c

159

pr_err("%pOFn: unable to alloc irq domain gc\n", np);

drivers/irqchip/irq-orion.c

165

pr_err("%pOFn: unable to get resource\n", np);

drivers/irqchip/irq-orion.c

170

pr_err("%s: unable to request mem region\n", np->name);

drivers/irqchip/irq-orion.c

177

pr_err("%pOFn: unable to parse irq\n", np);

drivers/irqchip/irq-orion.c

184

pr_err("%pOFn: unable to map resource\n", np);

drivers/irqchip/irq-owl-sirq.c

287

pr_err("%pOF: failed to find sirq parent domain\n", node);

drivers/irqchip/irq-owl-sirq.c

301

pr_err("%pOF: failed to map sirq registers\n", node);

drivers/irqchip/irq-owl-sirq.c

311

pr_err("%pOF: failed to parse interrupt %d\n", node, i);

drivers/irqchip/irq-owl-sirq.c

329

pr_err("%pOF: failed to add domain\n", node);

drivers/irqchip/irq-riscv-imsic-early.c

191

pr_err("%pfwP: Failed to find INTC domain\n", fwnode);

drivers/irqchip/irq-riscv-imsic-early.c

196

pr_err("%pfwP: Failed to create INTC mapping\n", fwnode);

drivers/irqchip/irq-riscv-imsic-early.c

203

pr_err("%pfwP: Failed to initialize IPI domain\n", fwnode);

drivers/irqchip/irq-riscv-imsic-early.c

231

pr_err("%pfwP: failed to setup state (error %d)\n", fwnode, rc);

drivers/irqchip/irq-riscv-imsic-early.c

265

pr_err("unable to allocate IMSIC FW node\n");

drivers/irqchip/irq-riscv-imsic-early.c

272

pr_err("%pfwP: failed to setup state (error %d)\n", imsic_acpi_fwnode, rc);

drivers/irqchip/irq-riscv-imsic-early.c

292

pr_err("%pfwP: failed to register IMSIC for MSI functionality (error %d)\n",

drivers/irqchip/irq-riscv-imsic-platform.c

317

pr_err("early driver not probed\n");

drivers/irqchip/irq-riscv-imsic-platform.c

322

pr_err("%pfwP: irq domain already created\n", imsic->fwnode);

drivers/irqchip/irq-riscv-imsic-platform.c

330

pr_err("%pfwP: failed to create IMSIC base domain\n", imsic->fwnode);

drivers/irqchip/irq-riscv-imsic-platform.c

350

pr_err("%pfwP: fwnode mismatch\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

623

pr_err("%pfwP: number of interrupt identities not found\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

708

pr_err("%pfwP: no parent irqs available\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

723

pr_err("%pfwP: guest index bits too big\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

730

pr_err("%pfwP: HART index bits too big\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

738

pr_err("%pfwP: group index bits too big\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

745

pr_err("%pfwP: group index shift too big\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

753

pr_err("%pfwP: invalid number of interrupt identities\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

761

pr_err("%pfwP: invalid number of guest interrupt identities\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

768

pr_err("%pfwP: first MMIO resource not found\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

804

pr_err("%pfwP: already initialized hence ignoring\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

809

pr_err("%pfwP: AIA support not available\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

848

pr_err("%pfwP: unable to parse MMIO regset %d\n", fwnode, i);

drivers/irqchip/irq-riscv-imsic-state.c

860

pr_err("%pfwP: address mismatch for regset %d\n", fwnode, i);

drivers/irqchip/irq-riscv-imsic-state.c

867

pr_err("%pfwP: unable to map MMIO regset %d\n", fwnode, i);

drivers/irqchip/irq-riscv-imsic-state.c

875

pr_err("%pfwP: failed to initialize local state\n",

drivers/irqchip/irq-riscv-imsic-state.c

936

pr_err("%pfwP: No CPU handlers found\n", fwnode);

drivers/irqchip/irq-riscv-imsic-state.c

944

pr_err("%pfwP: failed to create matrix allocator\n", fwnode);

drivers/irqchip/irq-riscv-intc.c

184

pr_err("unable to add IRQ domain\n");

drivers/irqchip/irq-riscv-intc.c

195

pr_err("failed to set irq handler\n");

drivers/irqchip/irq-riscv-intc.c

379

pr_err("unable to allocate INTC FW node\n");

drivers/irqchip/irq-sg2042-msi.c

242

pr_err("Failed to create the MSI middle domain\n");

drivers/irqchip/irq-sg2042-msi.c

298

pr_err("Failed to find the PLIC domain\n");

drivers/irqchip/irq-sifive-plic.c

556

pr_err("%pfwP: failed to find GSI mapping\n", fwnode);

drivers/irqchip/irq-sifive-plic.c

562

pr_err("%pfwP: no PLIC context available\n", fwnode);

drivers/irqchip/irq-sifive-plic.c

571

pr_err("%pfwP: riscv,ndev property not available\n", fwnode);

drivers/irqchip/irq-sifive-plic.c

577

pr_err("%pfwP: no PLIC context available\n", fwnode);

drivers/irqchip/irq-sni-exiu.c

237

pr_err("%pOF: no parent, giving up\n", node);

drivers/irqchip/irq-sni-exiu.c

243

pr_err("%pOF: unable to obtain parent domain\n", node);

drivers/irqchip/irq-sni-exiu.c

248

pr_err("%pOF: failed to parse memory resource\n", node);

drivers/irqchip/irq-sni-exiu.c

259

pr_err("%pOF: failed to allocate domain\n", node);

drivers/irqchip/irq-starfive-jh8100-intc.c

132

pr_err("Unable to map registers\n");

drivers/irqchip/irq-starfive-jh8100-intc.c

139

pr_err("Unable to get reset control %pe\n", rst);

drivers/irqchip/irq-starfive-jh8100-intc.c

146

pr_err("Unable to get clock %pe\n", clk);

drivers/irqchip/irq-starfive-jh8100-intc.c

164

pr_err("Unable to create IRQ domain\n");

drivers/irqchip/irq-starfive-jh8100-intc.c

171

pr_err("Failed to get main IRQ: %d\n", parent_irq);

drivers/irqchip/irq-stm32-exti.c

284

pr_err("%pOF: Unable to map registers\n", node);

drivers/irqchip/irq-stm32-exti.c

340

pr_err("%pOFn: Could not register interrupt domain.\n",

drivers/irqchip/irq-stm32-exti.c

349

pr_err("%pOF: Could not allocate generic interrupt chip.\n",

drivers/irqchip/irq-stm32mp-exti.c

382

pr_err("%s can't get hwspinlock (%d)\n", __func__, err);

drivers/irqchip/irq-sun6i-r.c

335

pr_err("%pOF: Failed to obtain parent domain\n", node);

drivers/irqchip/irq-sun6i-r.c

341

pr_err("%pOF: Failed to map MMIO region\n", node);

drivers/irqchip/irq-sun6i-r.c

348

pr_err("%pOF: Failed to allocate domain\n", node);

drivers/irqchip/irq-sunxi-nmi.c

131

pr_err("Cannot assign multiple trigger modes to IRQ %d.\n", data->irq);

drivers/irqchip/irq-sunxi-nmi.c

159

pr_err("Could not register interrupt domain.\n");

drivers/irqchip/irq-sunxi-nmi.c

167

pr_err("Could not allocate generic interrupt chip.\n");

drivers/irqchip/irq-sunxi-nmi.c

173

pr_err("unable to parse irq\n");

drivers/irqchip/irq-sunxi-nmi.c

181

pr_err("unable to map resource\n");

drivers/irqchip/irq-tb10x.c

106

pr_err("%pOFn: Request mem region failed.\n", ictl);

drivers/irqchip/irq-tb10x.c

113

pr_err("%pOFn: ioremap failed.\n", ictl);

drivers/irqchip/irq-tb10x.c

121

pr_err("%pOFn: Could not register interrupt domain.\n",

drivers/irqchip/irq-tb10x.c

131

pr_err("%pOFn: Could not allocate generic interrupt chip.\n",

drivers/irqchip/irq-tb10x.c

68

pr_err("%s: Cannot assign multiple trigger modes to IRQ %d.\n", __func__, data->irq);

drivers/irqchip/irq-tb10x.c

99

pr_err("%pOFn: No registers declared in DeviceTree.\n",

drivers/irqchip/irq-tegra.c

289

pr_err("%pOF: no parent, giving up\n", node);

drivers/irqchip/irq-tegra.c

295

pr_err("%pOF: unable to obtain parent domain\n", node);

drivers/irqchip/irq-tegra.c

327

pr_err("%pOF: no valid regions, giving up\n", node);

drivers/irqchip/irq-tegra.c

340

pr_err("%pOF: failed to allocated domain\n", node);

drivers/irqchip/irq-versatile-fpga.c

167

pr_err("%s: too few FPGA IRQ controllers, increase CONFIG_VERSATILE_FPGA_IRQ_NR\n", __func__);

drivers/irqchip/irq-vf610-mscm-ir.c

187

pr_err("vf610_mscm_ir: interrupt-parent not found\n");

drivers/irqchip/irq-vf610-mscm-ir.c

197

pr_err("vf610_mscm_ir: unable to map mscm register\n");

drivers/irqchip/irq-vf610-mscm-ir.c

205

pr_err("vf610_mscm_ir: regmap lookup for cpucfg failed\n");

drivers/irqchip/irq-vt8500.c

212

pr_err("%s: Unable to map IO memory\n", __func__);

drivers/irqchip/irq-vt8500.c

220

pr_err("%s: Unable to add irq domain!\n", __func__);

drivers/irqchip/irq-wpcm450-aic.c

148

pr_err("Failed to map WPCM450 AIC registers\n");

drivers/irqchip/irq-xilinx-intc.c

182

pr_err("irq-xilinx: unable to read xlnx,num-intr-inputs\n");

drivers/irqchip/irq-xilinx-intc.c

218

pr_err("irq-xilinx: Unable to create IRQ domain\n");

drivers/irqchip/irq-xilinx-intc.c

230

pr_err("irq-xilinx: interrupts property not in DT\n");

drivers/irqchip/qcom-pdc.c

380

pr_err("%pOF: unable to map previous PDC DRV region\n", node);

drivers/irqchip/qcom-pdc.c

389

pr_err("%pOF: unable to map PDC registers\n", node);

drivers/irqchip/qcom-pdc.c

398

pr_err("%pOF: unable to find PDC's parent domain\n", node);

drivers/irqchip/qcom-pdc.c

405

pr_err("%pOF: failed to init PDC pin-hwirq mapping\n", node);

drivers/irqchip/qcom-pdc.c

415

pr_err("%pOF: PDC domain add failed\n", node);

drivers/irqchip/spear-shirq.c

229

pr_err("%s: failed to map shirq registers\n", __func__);

drivers/irqchip/spear-shirq.c

238

pr_err("%s: irq desc alloc failed\n", __func__);

drivers/isdn/hardware/mISDN/mISDNisar.c

189

pr_err("%s: ISAR wrong version %d firmware download aborted\n",

drivers/leds/led-class.c

695

pr_err("Failed to create LEDs ordered workqueue\n");

drivers/leds/leds-apu.c

185

pr_err("No PC Engines APUv1 board detected. For APUv2,3 support, enable CONFIG_PCENGINES_APU2\n");

drivers/leds/leds-apu.c

191

pr_err("Device allocation failed\n");

drivers/leds/leds-apu.c

197

pr_err("Probe platform driver failed\n");

drivers/leds/leds-clevo-mail.c

184

pr_err("Skipping DMI detection. "

drivers/leds/leds-clevo-mail.c

198

pr_err("Can't probe platform driver\n");

drivers/leds/leds-mlxcpld.c

409

pr_err("Device allocation failed\n");

drivers/leds/leds-mlxcpld.c

415

pr_err("Probe platform driver failed\n");

drivers/leds/leds-pm8058.c

52

pr_err("Failed to set LED brightness\n");

drivers/leds/leds-pm8058.c

65

pr_err("Failed to get LED brightness\n");

drivers/leds/trigger/ledtrig-cpu.c

169

pr_err("CPU hotplug notifier for ledtrig-cpu could not be registered: %d\n",

drivers/macintosh/adb.c

484

pr_err("Two handlers for ADB device %d\n",

drivers/macintosh/adb.c

887

pr_err("adb: unable to get major %d\n", ADB_MAJOR);

drivers/macintosh/adbhid.c

1093

pr_err("%s: bad length for reg. 1\n", __func__);

drivers/macintosh/adbhid.c

271

pr_err("ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n",

drivers/macintosh/adbhid.c

410

pr_err("ADB HID on ID %d not yet registered\n", id);

drivers/macintosh/adbhid.c

508

pr_err("ADB HID on ID %d not yet registered\n", id);

drivers/macintosh/adbhid.c

763

pr_err("Trying to reregister ADB HID on ID %d\n", id);

drivers/macintosh/via-cuda.c

367

pr_err("Timeout waiting for " what "\n"); \

drivers/macintosh/via-cuda.c

720

pr_err("cuda_interrupt: unknown cuda_state %d?\n", cuda_state);

drivers/macintosh/via-cuda.c

782

pr_err("%s: got %d byte reply\n", __func__, req.reply_len);

drivers/macintosh/via-cuda.c

800

pr_err("%s: got %d byte reply\n", __func__, req.reply_len);

drivers/macintosh/via-pmu.c

1739

pr_err("%s: got %d byte reply\n", __func__, req.reply_len);

drivers/macintosh/via-pmu.c

1756

pr_err("%s: got %d byte reply\n", __func__, req.reply_len);

drivers/macintosh/via-pmu.c

469

pr_err("%s: couldn't get SR irq\n", __func__);

drivers/macintosh/via-pmu.c

474

pr_err("%s: couldn't get CL irq\n", __func__);

drivers/macintosh/windfarm_ad7417_sensor.c

254

pr_err("wf_ad7417: Can't identify location %s\n", loc);

drivers/macintosh/windfarm_cpufreq_clamp.c

85

pr_err("%s: Failed to add freq constraint (%d)\n", __func__,

drivers/macintosh/windfarm_fcu_controls.c

103

pr_err("Failure writing address to FCU: %d", nw);

drivers/macintosh/windfarm_fcu_controls.c

116

pr_err("wf_fcu: Failure reading data from FCU: %d", nw);

drivers/macintosh/windfarm_fcu_controls.c

140

pr_err("wf_fcu: Failure writing to FCU: %d", nw);

drivers/macintosh/windfarm_fcu_controls.c

392

pr_err("wf_fcu: Failed to register fan %s\n", name);

drivers/macintosh/windfarm_fcu_controls.c

535

pr_err("wf_fcu: Initialization failed !\n");

drivers/macintosh/windfarm_fcu_controls.c

552

pr_err("wf_fcu: Failed to find fans for your machine\n");

drivers/macintosh/windfarm_pm72.c

814

pr_err("wf_pm72: Failed to find MPU data for CPU %d\n", i);

drivers/macintosh/windfarm_rm31.c

706

pr_err("wf_rm31: Failed to find MPU data for CPU %d\n", i);

drivers/mailbox/omap-mailbox.c

238

pr_err("failed to register mailbox interrupt:%d\n", ret);

drivers/mailbox/omap-mailbox.c

430

pr_err("%s: could not find node phandle 0x%x\n",

drivers/mailbox/omap-mailbox.c

464

pr_err("%s: only DT-based devices are supported\n", __func__);

drivers/mailbox/pcc.c

376

pr_err("Channel not found for idx: %d\n", subspace_id);

drivers/mailbox/pcc.c

539

pr_err("Error: Cannot access register of %u bit width",

drivers/mailbox/pcc.c

546

pr_err("Failed to ioremap PCC %s register\n", name);

drivers/mailbox/pcc.c

583

pr_err("PCC GSI %d not registered\n",

drivers/mailbox/pcc.c

611

pr_err("PCC subspace has level IRQ with no ACK register\n");

drivers/mailbox/pcc.c

819

pr_err("Platform Interrupt flag must be set to 1");

drivers/mailbox/pcc.c

851

pr_err("Err registering PCC as Mailbox controller: %d\n", rc);

drivers/mcb/mcb-core.c

242

pr_err("Failed registering device 16z%03d on bus mcb%d (%d)\n",

drivers/mcb/mcb-parse.c

193

pr_err("Unsupported chameleon version 0x%x\n",

drivers/mcb/mcb-parse.c

227

pr_err("Invalid chameleon descriptor type 0x%x\n",

drivers/md/bcache/bset.c

28

pr_err("block %u key %u/%u: ", set,

drivers/md/bcache/bset.c

39

pr_err("Key skipped backwards\n");

drivers/md/bcache/btree.c

2099

pr_err("fails to run thread bch_btrchk[%d]\n", i);

drivers/md/bcache/btree.c

2509

pr_err("error %i\n", ret);

drivers/md/bcache/debug.c

77

pr_err("*** in memory:\n");

drivers/md/bcache/debug.c

80

pr_err("*** read back in:\n");

drivers/md/bcache/debug.c

87

pr_err("*** on disk block %u:\n", block);

drivers/md/bcache/debug.c

91

pr_err("*** block %zu not written\n",

drivers/md/bcache/debug.c

98

pr_err("b->written %u\n", b->written);

drivers/md/bcache/io.c

126

pr_err("%pg: IO error on %s%s\n",

drivers/md/bcache/io.c

75

pr_err("%pg: IO error on backing device, unrecoverable\n",

drivers/md/bcache/journal.c

352

pr_err("journal entries %llu-%llu missing! (replaying %llu-%llu)\n",

drivers/md/bcache/journal.c

464

pr_err("BUG: flush_write bit should not be set here!\n");

drivers/md/bcache/journal.c

517

pr_err("BUG: btree_nodes[%d] is NULL\n", i);

drivers/md/bcache/journal.c

523

pr_err("BUG: bnode %p: journal_flush bit cleaned\n", b);

drivers/md/bcache/request.c

668

pr_err("Can't flush %pg: returned bi_status %i\n",

drivers/md/bcache/super.c

1031

pr_err("%pg: device offline for %d seconds\n",

drivers/md/bcache/super.c

1034

pr_err("%s: disable I/O request due to backing device offline\n",

drivers/md/bcache/super.c

1063

pr_err("I/O disabled on cached dev %pg\n", dc->bdev);

drivers/md/bcache/super.c

1098

pr_err("Couldn't create bcache dev <-> disk sysfs symlinks\n");

drivers/md/bcache/super.c

1209

pr_err("Can't attach %pg: already attached\n", dc->bdev);

drivers/md/bcache/super.c

1214

pr_err("Can't attach %pg: shutting down\n", dc->bdev);

drivers/md/bcache/super.c

1220

pr_err("Couldn't attach %pg: block size less than set's block size\n",

drivers/md/bcache/super.c

1228

pr_err("Tried to attach %pg but duplicate UUID already attached\n",

drivers/md/bcache/super.c

1247

pr_err("Couldn't find uuid for %pg in set\n", dc->bdev);

drivers/md/bcache/super.c

1253

pr_err("Not caching %pg, no room for UUID\n", dc->bdev);

drivers/md/bcache/super.c

1298

pr_err("Couldn't start writeback facilities for %s\n",

drivers/md/bcache/super.c

1321

pr_err("Couldn't run cached device %pg\n", dc->bdev);

drivers/md/bcache/super.c

1329

pr_err("The obsoleted large bucket layout is unsupported, set the bcache device into read-only\n");

drivers/md/bcache/super.c

1330

pr_err("Please update to the latest bcache-tools to create the cache device\n");

drivers/md/bcache/super.c

1557

pr_err("The obsoleted large bucket layout is unsupported, set the bcache device into read-only\n");

drivers/md/bcache/super.c

1558

pr_err("Please update to the latest bcache-tools to create the cache device\n");

drivers/md/bcache/super.c

1595

pr_err("Can't create volume, no room for UUID\n");

drivers/md/bcache/super.c

1620

pr_err("stop %s: too many IO errors on backing device %pg\n",

drivers/md/bcache/super.c

1652

pr_err("error on %pU: %pV, disabling caching\n",

drivers/md/bcache/super.c

2130

pr_err("Detect obsoleted large bucket layout, all attached bcache device will be read-only\n");

drivers/md/bcache/super.c

79

pr_err("Bucket size (1 << %u) overflows\n",

drivers/md/bcache/super.c

815

pr_err("Couldn't create device -> cache set symlink\n");

drivers/md/bcache/super.c

819

pr_err("Couldn't create cache set -> device symlink\n");

drivers/md/bcache/super.c

878

pr_err("bcache device (NULL gendisk) stopped\n");

drivers/md/bcache/super.c

928

pr_err("nr_stripes too large or invalid: %llu (start sector beyond end of disk?)\n",

drivers/md/bcache/sysfs.c

443

pr_err("Can't attach %s: cache set not found\n", buf);

drivers/md/bcache/sysfs.c

477

pr_err("%s: failed to run non-existent writeback thread\n",

drivers/md/bcache/writeback.c

1033

pr_err("fails to run thread bch_dirty_init[%d]\n", i);

drivers/md/bcache/writeback.h

66

pr_err("Invalid stripe %llu (>= nr_stripes %d).\n",

drivers/md/dm-pcache/pcache_internal.h

9

pr_err("dm-pcache: %s:%u " fmt, __func__, __LINE__, ##__VA_ARGS__)

drivers/md/dm-vdo/logger.c

71

pr_err("%pV", &vaf);

drivers/md/md-autodetect.c

174

pr_err("md: md_alloc failed - cannot start array %s\n", name);

drivers/md/md-autodetect.c

180

pr_err("md: failed to lock array %s\n", name);

drivers/md/md-bitmap.c

2295

pr_err("%s can't get bitmap from slot %d\n", __func__, slot);

drivers/md/md-bitmap.c

611

pr_err("md: bitmap read error: (%dB @ %llu): %d\n",

drivers/md/md-cluster.c

1015

pr_err("%s:%d: failed to send BITMAP_NEEDS_SYNC message (%d)\n",

drivers/md/md-cluster.c

1145

pr_err("%s:%d: failed to send BITMAP_RESIZE message (%d)\n",

drivers/md/md-cluster.c

1179

pr_err("can't get bitmap from slot %d\n", i);

drivers/md/md-cluster.c

1194

pr_err("Cannot initialize %s lock\n", str);

drivers/md/md-cluster.c

1246

pr_err("can't get bitmap from slot %d\n", i);

drivers/md/md-cluster.c

1257

pr_err("md-cluster: Cannot initialize %s\n", str);

drivers/md/md-cluster.c

1305

pr_err("%s: lock_comm failed\n", __func__);

drivers/md/md-cluster.c

1325

pr_err("%s:%d: failed to send METADATA_UPDATED msg\n",

drivers/md/md-cluster.c

1331

pr_err("md-cluster: No good device id found to send\n");

drivers/md/md-cluster.c

1346

pr_err("%s:%d: failed to send CHANGE_CAPACITY msg\n",

drivers/md/md-cluster.c

1354

pr_err("%s:%d: failed to send METADATA_UPDATED msg\n",

drivers/md/md-cluster.c

141

pr_err("locking DLM '%s' timeout!\n", res->name);

drivers/md/md-cluster.c

1549

pr_err("md: can't alloc mem for other bitmap locks\n");

drivers/md/md-cluster.c

210

pr_err("md-cluster: Unable to allocate resource name for resource %s\n", name);

drivers/md/md-cluster.c

217

pr_err("md-cluster: Unable to allocate LVB for resource %s\n", name);

drivers/md/md-cluster.c

230

pr_err("md-cluster: Unable to lock NL on new lock resource %s\n", name);

drivers/md/md-cluster.c

258

pr_err("failed to unlock %s return %d\n", res->name, ret);

drivers/md/md-cluster.c

310

pr_err("md-cluster: Cannot initialize bitmaps\n");

drivers/md/md-cluster.c

316

pr_err("md-cluster: Could not DLM lock %s: %d\n",

drivers/md/md-cluster.c

322

pr_err("md-cluster: Could not copy data from bitmap %d\n", slot);

drivers/md/md-cluster.c

533

pr_err("md-cluster(%s:%d): timeout on a new disk adding\n",

drivers/md/md-cluster.c

662

pr_err("md/raid1:failed to get CR on MESSAGE\n");

drivers/md/md-cluster.c

703

pr_err("md-cluster(%s:%d): failed to get EX on TOKEN (%d)\n",

drivers/md/md-cluster.c

773

pr_err("md-cluster: failed to get EX on MESSAGE (%d)\n", error);

drivers/md/md-cluster.c

782

pr_err("md-cluster: failed to convert EX to CW on MESSAGE(%d)\n",

drivers/md/md-cluster.c

790

pr_err("md-cluster: failed to convert CR to EX on ACK(%d)\n",

drivers/md/md-cluster.c

798

pr_err("md-cluster: failed to convert EX to CR on ACK(%d)\n",

drivers/md/md-cluster.c

805

pr_err("md-cluster: failed convert to NL on MESSAGE(%d)\n",

drivers/md/md-cluster.c

912

pr_err("md-cluster: Slot allotted(%d) is greater than available slots(%d).",

drivers/md/md-cluster.c

922

pr_err("md-cluster: cannot allocate memory for recv_thread!\n");

drivers/md/md-cluster.c

938

pr_err("md-cluster: can't join cluster to avoid lock issue\n");

drivers/md/md-cluster.c

948

pr_err("md-cluster: failed to get a sync CR lock on ACK!(%d)\n",

drivers/md/md-cluster.c

953

pr_err("md-cluster: failed to get a sync CR lock on no-new-dev!(%d)\n", ret);

drivers/md/md-cluster.c

964

pr_err("Failed to get bitmap lock\n");

drivers/md/md-cluster.c

999

pr_err("md-cluster: failed to gather all resyn infos\n");

drivers/md/md-linear.c

287

pr_err("md/linear:%s: make_request: Sector %llu out of bounds on dev %pg: %llu sectors, offset %llu\n",

drivers/md/md-llbitmap.c

1366

pr_err("%s: %s: read super block failed", __func__,

drivers/md/md-llbitmap.c

1468

pr_err("%s: invalid bit %llu state %d\n",

drivers/md/md-llbitmap.c

623

pr_err("%s: invalid bit %lu state %d action %d, forcing resync\n",

drivers/md/md-llbitmap.c

818

pr_err("md/llbitmap: %s: no super block found", mdname(mddev));

drivers/md/md-llbitmap.c

824

pr_err("md/llbitmap: %s: read super block failed",

drivers/md/md-llbitmap.c

831

pr_err("md/llbitmap: %s: invalid super block magic number",

drivers/md/md-llbitmap.c

837

pr_err("md/llbitmap: %s: invalid super block version",

drivers/md/md-llbitmap.c

843

pr_err("md/llbitmap: %s: bitmap superblock UUID mismatch\n",

drivers/md/md-llbitmap.c

864

pr_err("md/llbitmap: %s: chunksize not a power of 2",

drivers/md/md-llbitmap.c

871

pr_err("md/llbitmap: %s: chunksize too small %lu < %llu / %lu",

drivers/md/md-llbitmap.c

879

pr_err("md/llbitmap: %s: daemon sleep %lu period out of range",

drivers/md/md.c

1091

pr_err("md: %s gets error=%d\n", __func__,

drivers/md/md.c

1207

pr_err("md: disabled device %pg, could not read superblock.\n",

drivers/md/md.c

260

pr_err("can't alloc memory pool for serialization\n");

drivers/md/md.c

2791

pr_err("%s: can't update sb for read-only array %s\n", __func__, mdname(mddev));

drivers/md/md.c

581

pr_err("md: %pg flush io error %d\n", bio->bi_bdev,

drivers/md/md.c

5923

pr_err("md: serialize_policy is only effective for raid1\n");

drivers/md/md.c

5951

pr_err("%s: Cannot set LBS smaller than mddev LBS %u\n",

drivers/md/md.c

6184

pr_err("%s: logical_block_size must not larger than PAGE_SIZE\n",

drivers/md/md.c

6224

pr_err("%s: incompatible logical_block_size, can not add\n",

drivers/md/md.c

6234

pr_err("%s: incompatible integrity profile for %pg\n",

drivers/md/raid0.c

270

pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n",

drivers/md/raid0.c

272

pr_err("md/raid0: please set raid0.default_layout to 1 or 2\n");

drivers/md/raid0.c

731

pr_err("md/raid0:%s: (N - 1) mirrors drives must be already faulty!\n",

drivers/md/raid10.c

3978

pr_err("only near layout is supported by clustered"

drivers/md/raid10.c

4027

pr_err("md/raid10:%s: not enough operational mirrors.\n",

drivers/md/raid5-cache.c

2147

pr_err("md/raid:%s: Cannot increase cache size, ret=%d, new_size=%d, min_nr_stripes=%d, max_nr_stripes=%d\n",

drivers/md/raid5-cache.c

2159

pr_err("md/raid:%s: Cannot get enough stripes due to memory pressure. Recovery failed.\n",

drivers/md/raid5-cache.c

2347

pr_err("md/raid:%s: cannot allocate memory to rewrite data only stripes\n",

drivers/md/raid5-cache.c

2490

pr_err("md/raid:%s: failed to rewrite stripes to journal\n",

drivers/md/raid5-cache.c

3069

pr_err("md/raid:%s: write journal/cache doesn't work for array with %d disks\n",

drivers/md/raid5.c

4355

pr_err("%s: unknown check_state: %d sector: %llu\n",

drivers/md/raid5.c

605

pr_err("sector=%llx i=%d %p %p %p %p %d\n",

drivers/media/cec/core/cec-core.c

119

pr_err("%s: cdev_device_add failed\n", __func__);

drivers/media/cec/core/cec-core.c

268

pr_err("cec-%s: kernel_thread() failed\n", name);

drivers/media/cec/core/cec-core.c

281

pr_err("cec-%s: failed to allocate memory for rc_dev\n",

drivers/media/cec/core/cec-core.c

329

pr_err("cec-%s: failed to prepare input device\n",

drivers/media/cec/core/cec-core.c

96

pr_err("could not get a free minor\n");

drivers/media/cec/core/cec-pin.c

1174

pr_err("cec-pin: kernel_thread() failed\n");

drivers/media/common/saa7146/saa7146_core.c

99

pr_err("%s: %s timed out while waiting for registers getting programmed\n",

drivers/media/common/siano/sms-cards.c

219

pr_err("Unknown SMS board event\n");

drivers/media/common/siano/smscoreapi.c

1144

pr_err("mode %d not supported on this device\n", mode);

drivers/media/common/siano/smscoreapi.c

1154

pr_err("failed to open firmware file '%s'\n", fw_filename);

drivers/media/common/siano/smscoreapi.c

1161

pr_err("failed to allocate firmware buffer\n");

drivers/media/common/siano/smscoreapi.c

1263

pr_err("MSG_SMS_GET_VERSION_EX_REQ failed first try\n");

drivers/media/common/siano/smscoreapi.c

1271

pr_err("MSG_SMS_GET_VERSION_EX_REQ failed second try, rc %d\n",

drivers/media/common/siano/smscoreapi.c

1332

pr_err("invalid mode specified %d\n", mode);

drivers/media/common/siano/smscoreapi.c

1341

pr_err("mode detect failed %d\n", rc);

drivers/media/common/siano/smscoreapi.c

1362

pr_err("device init failed, rc %d.\n", rc);

drivers/media/common/siano/smscoreapi.c

1366

pr_err("invalid mode specified %d\n", mode);

drivers/media/common/siano/smscoreapi.c

1403

pr_err("return error code %d.\n", rc);

drivers/media/common/siano/smscoreapi.c

1670

pr_err("bad parameter.\n");

drivers/media/common/siano/smscoreapi.c

1678

pr_err("The msg ID already registered to another client.\n");

drivers/media/common/siano/smscoreapi.c

1714

pr_err("Client already exist.\n");

drivers/media/common/siano/smscoreapi.c

1789

pr_err("Got NULL client\n");

drivers/media/common/siano/smscoreapi.c

1797

pr_err("Got NULL coredev\n");

drivers/media/common/siano/smscoreapi.c

2002

pr_err("smscore_gpio_configure timeout\n");

drivers/media/common/siano/smscoreapi.c

2004

pr_err("smscore_gpio_configure error\n");

drivers/media/common/siano/smscoreapi.c

2051

pr_err("smscore_gpio_set_level timeout\n");

drivers/media/common/siano/smscoreapi.c

2053

pr_err("smscore_gpio_set_level error\n");

drivers/media/common/siano/smscoreapi.c

2099

pr_err("smscore_gpio_get_level timeout\n");

drivers/media/common/siano/smscoreapi.c

2101

pr_err("smscore_gpio_get_level error\n");

drivers/media/common/siano/smscoreapi.c

448

pr_err("failed to create smscore_registry.\n");

drivers/media/common/siano/smscoreapi.c

461

pr_err("No registry found.\n");

drivers/media/common/siano/smscoreapi.c

475

pr_err("No registry found.\n");

drivers/media/common/siano/smscoreapi.c

488

pr_err("No registry found.\n");

drivers/media/common/siano/smscoreapi.c

500

pr_err("No registry found.\n");

drivers/media/common/siano/smscoreapi.c

785

pr_err("Error initialization DTV IR sub-module\n");

drivers/media/common/siano/smscoreapi.c

807

pr_err("Sending IR initialization message failed\n");

drivers/media/common/siano/smscoreapi.c

829

pr_err("no board configuration exist.\n");

drivers/media/common/siano/smscoreapi.c

942

pr_err("device reload failed, rc %d\n", rc);

drivers/media/common/siano/smsdvb-main.c

111

pr_err("Unknown dvb3 api event\n");

drivers/media/common/siano/smsdvb-main.c

1123

pr_err("dvb_register_adapter() failed %d\n", rc);

drivers/media/common/siano/smsdvb-main.c

1137

pr_err("dvb_dmx_init failed %d\n", rc);

drivers/media/common/siano/smsdvb-main.c

1148

pr_err("dvb_dmxdev_init failed %d\n", rc);

drivers/media/common/siano/smsdvb-main.c

1169

pr_err("frontend registration failed %d\n", rc);

drivers/media/common/siano/smsdvb-main.c

1181

pr_err("smscore_register_client() failed %d\n", rc);

drivers/media/common/siano/smsdvb-main.c

1207

pr_err("dvb_create_media_graph failed %d\n", rc);

drivers/media/common/siano/smsir.c

83

pr_err("Failed to register device\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

292

pr_err("Remapping memory failed, error: %d\n", ret);

drivers/media/common/videobuf2/videobuf2-dma-contig.c

406

pr_err("failed to map scatterlist\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

629

pr_err("failed to allocate sg table\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

637

pr_err("failed to initialize sg table\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

647

pr_err("failed to map scatterlist\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

654

pr_err("contiguous mapping is too small %lu/%lu\n",

drivers/media/common/videobuf2/videobuf2-dma-contig.c

698

pr_err("trying to pin a non attached buffer\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

703

pr_err("dmabuf buffer is already pinned\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

710

pr_err("Error getting dmabuf scatterlist\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

717

pr_err("contiguous chunk is too small %lu/%lu\n",

drivers/media/common/videobuf2/videobuf2-dma-contig.c

738

pr_err("trying to unpin a not attached buffer\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

743

pr_err("dmabuf buffer is already unpinned\n");

drivers/media/common/videobuf2/videobuf2-dma-contig.c

792

pr_err("failed to attach dmabuf\n");

drivers/media/common/videobuf2/videobuf2-dma-sg.c

444

pr_err("failed to map scatterlist\n");

drivers/media/common/videobuf2/videobuf2-dma-sg.c

557

pr_err("trying to pin a non attached buffer\n");

drivers/media/common/videobuf2/videobuf2-dma-sg.c

562

pr_err("dmabuf buffer is already pinned\n");

drivers/media/common/videobuf2/videobuf2-dma-sg.c

569

pr_err("Error getting dmabuf scatterlist\n");

drivers/media/common/videobuf2/videobuf2-dma-sg.c

586

pr_err("trying to unpin a not attached buffer\n");

drivers/media/common/videobuf2/videobuf2-dma-sg.c

591

pr_err("dmabuf buffer is already unpinned\n");

drivers/media/common/videobuf2/videobuf2-dma-sg.c

637

pr_err("failed to attach dmabuf\n");

drivers/media/common/videobuf2/videobuf2-vmalloc.c

157

pr_err("Address of an unallocated plane requested or cannot map user pointer\n");

drivers/media/common/videobuf2/videobuf2-vmalloc.c

176

pr_err("No memory to map\n");

drivers/media/common/videobuf2/videobuf2-vmalloc.c

182

pr_err("Remapping vmalloc memory, error: %d\n", ret);

drivers/media/common/videobuf2/videobuf2-vmalloc.c

289

pr_err("failed to map scatterlist\n");

drivers/media/dvb-core/dmxdev.c

718

pr_err("DVB (%s): could not alloc feed\n",

drivers/media/dvb-core/dmxdev.c

726

pr_err("DVB (%s): could not set feed\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1166

pr_err("dvb_ca adaptor %d: PC card did not respond :(\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1183

pr_err("dvb_ca adapter %d: Invalid PC card inserted :(\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1190

pr_err("dvb_ca adapter %d: Unable to initialise CAM :(\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1199

pr_err("dvb_ca adapter %d: Unable to reset CAM IF\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1214

pr_err("dvb_ca adapter %d: DVB CAM did not respond :(\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1233

pr_err("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1243

pr_err("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1651

pr_err("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n",

drivers/media/dvb-core/dvb_ca_en50221.c

1934

pr_err("dvb_ca_init: failed to start kernel_thread (%d)\n",

drivers/media/dvb-core/dvb_ca_en50221.c

536

pr_err("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n",

drivers/media/dvb-core/dvb_ca_en50221.c

704

pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n",

drivers/media/dvb-core/dvb_ca_en50221.c

712

pr_err("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n",

drivers/media/dvb-core/dvb_ca_en50221.c

720

pr_err("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n",

drivers/media/dvb-core/dvb_demux.c

663

pr_err("%s: feed already in list (type=%x state=%x pid=%x)\n",

drivers/media/dvb-core/dvb_demux.c

677

pr_err("%s: feed not in list (type=%x state=%x pid=%x)\n",

drivers/media/dvb-core/dvb_net.c

1022

pr_err("%s: could not get filter\n", dev->name);

drivers/media/dvb-core/dvb_net.c

1063

pr_err("%s: BUG %d\n", __func__, __LINE__);

drivers/media/dvb-core/dvb_net.c

1074

pr_err("%s: could not allocate section feed\n",

drivers/media/dvb-core/dvb_net.c

1082

pr_err("%s: could not set section feed\n", dev->name);

drivers/media/dvb-core/dvb_net.c

1123

pr_err("%s: could not allocate ts feed\n", dev->name);

drivers/media/dvb-core/dvb_net.c

1137

pr_err("%s: could not set ts feed\n", dev->name);

drivers/media/dvb-core/dvb_net.c

1186

pr_err("%s: no feed to stop\n", dev->name);

drivers/media/dvb-core/dvb_net.c

1197

pr_err("%s: no ts feed to stop\n", dev->name);

drivers/media/dvb-core/dvb_net.c

375

pr_err("%lu: Invalid ULE packet (pointer field %d)\n",

drivers/media/dvb-core/dvbdev.c

1091

pr_err("dvb-core: unable to get major %d\n", DVB_MAJOR);

drivers/media/dvb-core/dvbdev.c

1098

pr_err("dvb-core: unable register character device\n");

drivers/media/dvb-core/dvbdev.c

468

pr_err("%s: couldn't find free device id\n", __func__);

drivers/media/dvb-core/dvbdev.c

552

pr_err("%s: dvb_register_media_device failed to create the mediagraph\n",

drivers/media/dvb-core/dvbdev.c

571

pr_err("%s: failed to create device dvb%d.%s%d (%pe)\n",

drivers/media/dvb-frontends/cx24120.c

107

#define err(args...) pr_err("cx24120: ### ERROR: " args)

drivers/media/dvb-frontends/cxd2880/cxd2880_spi_device.c

93

pr_err("spi_setup failed %d\n", result);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1042

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1109

pr_err("invalid system\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1131

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1272

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1313

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1334

pr_err("invalid system");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1341

pr_err("failed. sys = %d\n", priv->tnrdmd.sys);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1370

pr_err("invalid system\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1390

pr_err("invalid arg.");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1397

pr_err("cxd2880_set_frontend failed %d\n", ret);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1420

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1621

pr_err("invalid arg.\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1808

pr_err("invalid arg.");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1886

pr_err("invalid arg.\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1905

pr_err("spi_device_initialize failed. %d\n", ret);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1913

pr_err("spi_device_create_spi failed. %d\n", ret);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1920

pr_err("io_spi_create failed. %d\n", ret);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1927

pr_err("set bank to 0x00 failed.\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1934

pr_err("read chip id failed.\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

1942

pr_err("chip id invalid.\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

480

pr_err("invalid arg.\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

494

pr_err("invalid arg.\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

520

pr_err("cxd2880 integ init failed %d\n", ret);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

529

pr_err("cxd2880 set config failed %d\n", ret);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

545

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

569

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

611

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

626

pr_err("invalid system\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

649

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

664

pr_err("invalid system\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

697

pr_err("invalid arg\n");

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

707

pr_err("tps monitor error ret = %d\n", ret);

drivers/media/dvb-frontends/cxd2880/cxd2880_top.c

819

pr_err("invalid arg\n");

drivers/media/dvb-frontends/dib3000mb.c

143

pr_err("unknown bandwidth value.\n");

drivers/media/dvb-frontends/dib3000mb.c

492

pr_err("Unexpected constellation returned by TPS (%d)\n", tps_val);

drivers/media/dvb-frontends/dib3000mb.c

519

pr_err("Unexpected ALPHA value returned by TPS (%d)\n", tps_val);

drivers/media/dvb-frontends/dib3000mb.c

556

pr_err("Unexpected FEC returned by TPS (%d)\n", tps_val);

drivers/media/dvb-frontends/dib3000mb.c

579

pr_err("Unexpected Guard Time returned by TPS (%d)\n", tps_val);

drivers/media/dvb-frontends/dib3000mb.c

594

pr_err("unexpected transmission mode return by TPS (%d)\n", tps_val);

drivers/media/dvb-frontends/dib3000mb_priv.h

17

{ pr_err("while sending 0x%04x to 0x%04x.", val, reg); return -EREMOTEIO; }

drivers/media/dvb-frontends/dib3000mb_priv.h

21

pr_err("sizeof: %zu %zu is different", sizeof(a), sizeof(v));\

drivers/media/dvb-frontends/dibx000_common.c

401

pr_err("incorrect I2C interface selected\n");

drivers/media/dvb-frontends/dibx000_common.c

466

pr_err("could not initialize the tuner i2c_adapter\n");

drivers/media/dvb-frontends/dibx000_common.c

472

pr_err("could not initialize the master i2c_adapter\n");

drivers/media/dvb-frontends/dibx000_common.c

478

pr_err("could not initialize the master i2c_adapter\n");

drivers/media/dvb-frontends/dibx000_common.c

484

pr_err("could not initialize the master i2c_adapter\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

10005

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10018

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10094

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10100

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10105

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10110

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10115

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10121

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10126

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10131

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10138

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10145

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10152

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10157

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10164

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10169

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10174

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10179

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10186

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10191

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10196

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10201

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10206

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10213

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10218

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10223

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10228

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10233

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10240

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10245

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10250

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10255

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10260

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10267

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10272

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10277

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10282

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10287

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10294

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10299

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10304

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10309

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10314

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10321

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10326

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10331

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10336

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10341

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10348

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10353

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10361

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10366

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10372

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10377

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10390

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10396

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10401

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10502

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10597

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10604

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10619

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10624

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10634

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10682

pr_err("error getting signal strength %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10694

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10709

pr_err("error %d getting UCB\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10721

pr_err("error %d getting pre-ber\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10732

pr_err("error %d getting post-ber\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10742

pr_err("error %d getting MER\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10756

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10833

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10894

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10902

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10930

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

10939

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11072

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11100

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11107

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11120

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11137

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11142

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11150

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11157

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11209

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11290

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11367

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11372

pr_err("failed to powerup device\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11379

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11393

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11398

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11407

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11413

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11418

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11424

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11434

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11440

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11446

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11458

pr_err("Should powerup before loading the firmware.");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11465

pr_err("error %d while uploading the firmware\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11471

pr_err("error %d while verifying the firmware\n",

drivers/media/dvb-frontends/drx39xyj/drxj.c

11482

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11495

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11520

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11525

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11531

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11569

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11575

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11581

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11708

pr_err("Firmware is truncated at pos %u/%u\n", count, size);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11754

pr_err("Couldn't read firmware %s\n", mc_file);

drivers/media/dvb-frontends/drx39xyj/drxj.c

11760

pr_err("Firmware is too short!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11778

pr_err("Firmware magic word doesn't match\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11820

pr_err("firmware CRC is wrong\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11837

pr_err("error writing firmware at pos %zd\n",

drivers/media/dvb-frontends/drx39xyj/drxj.c

11861

pr_err("error reading firmware at pos %zd\n",

drivers/media/dvb-frontends/drx39xyj/drxj.c

11871

pr_err("error verifying firmware at pos %zd\n",

drivers/media/dvb-frontends/drx39xyj/drxj.c

11911

pr_err("Failed to setup LNA GPIO!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11919

pr_err("Failed to %sable LNA!\n",

drivers/media/dvb-frontends/drx39xyj/drxj.c

11946

pr_err("Power state change failed\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11964

pr_err("drx39xxj: could not get lock status!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11971

pr_err("drx says NEVER_LOCK\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

11994

pr_err("Lock state unknown %d\n", lock_status);

drivers/media/dvb-frontends/drx39xyj/drxj.c

12142

pr_err("Failed to set standard! result=%02x\n",

drivers/media/dvb-frontends/drx39xyj/drxj.c

12156

pr_err("Failed to set channel!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

12198

pr_err("drx39xxj: could not open i2c gate [%d]\n",

drivers/media/dvb-frontends/drx39xyj/drxj.c

12218

pr_err("drx39xxj_init(): DRX open failed rc=%d!\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

12234

pr_err("LNA is not supported on this device!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

12321

pr_err("DRX open failed! Aborting\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

1343

pr_err("i2c was zero, aborting\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

2138

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2149

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2243

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2282

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2287

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2292

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2297

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2304

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2309

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2324

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2342

pr_err("timeout\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

2348

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2356

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2394

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2428

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2480

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2485

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2490

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2520

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2529

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2534

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2540

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2762

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2769

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2774

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2779

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2784

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2789

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2794

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2800

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2806

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2839

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2844

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2849

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2854

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2859

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2865

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2871

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2877

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2882

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2893

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

2898

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3055

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3060

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3065

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3070

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3075

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3082

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3089

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3094

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3101

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3108

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3113

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3118

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3126

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3132

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3137

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3142

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3147

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3155

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3165

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3170

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3175

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3180

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3185

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3190

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3195

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3200

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3206

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3211

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3216

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3221

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3226

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3231

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3236

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3243

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3249

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3256

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3262

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3267

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3272

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3277

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3282

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3287

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3292

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3297

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3302

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3307

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3312

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3317

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3323

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3329

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3376

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3381

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3386

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3406

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3411

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3416

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3447

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3459

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3494

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3502

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3539

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3559

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3582

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3605

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3626

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3644

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3676

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3698

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3705

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3716

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3737

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3744

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3755

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3776

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3783

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3794

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3816

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3823

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3834

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3846

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3918

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3924

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3930

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3936

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3944

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3949

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3954

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3961

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3983

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

3993

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4000

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4007

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4014

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4021

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4034

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4043

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4062

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4069

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4076

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4083

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4169

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4260

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4265

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4275

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4282

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4289

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4322

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4332

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4339

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4345

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4418

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4423

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4428

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4433

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4438

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4443

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4448

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4453

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4458

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4463

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4468

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4473

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4478

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4501

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4506

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4511

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4516

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4521

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4526

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4531

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4536

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4541

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4546

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4553

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4559

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4565

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4577

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4582

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4587

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4592

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4597

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4602

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4607

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4612

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4617

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4622

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4627

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4632

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4637

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4642

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4647

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4652

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4657

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4662

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4667

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4672

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4677

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4682

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4687

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4692

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4697

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4702

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4716

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4721

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4728

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4735

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4831

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4867

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4938

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4944

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4951

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4968

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4975

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4981

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

4998

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5003

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5011

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5020

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5026

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5033

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5043

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5050

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5059

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5065

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5072

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5078

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5151

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5157

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5164

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5182

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5189

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5195

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5212

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5217

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5223

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5228

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5239

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5245

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5252

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5263

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5270

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5280

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5286

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5293

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5300

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5311

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5355

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5364

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5415

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5422

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5427

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5433

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5438

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5444

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5449

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5454

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5459

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5464

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5472

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5683

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5688

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5751

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5756

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5761

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5766

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5771

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5776

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5781

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5794

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5800

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5805

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5810

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5816

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5821

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5826

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5832

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5837

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5842

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5847

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5852

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5857

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5862

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5867

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5872

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5878

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5883

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5889

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5894

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5899

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5904

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5909

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5914

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5921

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5928

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5934

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5942

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5947

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5952

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5957

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5965

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5970

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5977

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5982

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5987

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5993

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

5998

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6005

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6010

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6015

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6020

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6026

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6033

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6041

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6046

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6052

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6057

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6062

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6073

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6079

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6086

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6091

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6096

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6109

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6124

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6130

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6135

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6140

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6145

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6150

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6155

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6160

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6165

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6178

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6184

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6189

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6194

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6220

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6231

pr_err("error: period and/or prescale is zero!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

6259

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6275

pr_err("error: period and/or prescale is zero!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

6300

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6321

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6371

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6376

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6388

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6395

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6400

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6406

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6411

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6416

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6421

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6426

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6436

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6530

pr_err("error: fec_rs_bit_cnt is zero!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

6566

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6571

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6576

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6583

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6588

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6593

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6627

pr_err("error: qam_vd_period is zero!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

6640

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6645

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6688

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6693

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6699

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6704

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6709

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6714

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6719

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6724

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6730

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6735

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6740

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6746

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6751

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6756

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6761

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6766

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6771

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6776

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6782

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6787

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6792

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6797

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6802

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6807

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6812

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6817

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6822

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6827

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6832

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6837

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6842

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6847

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6852

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6857

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6862

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6867

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6872

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6877

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6883

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6923

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6928

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6934

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6939

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6944

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6949

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6954

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6959

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6965

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6970

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6975

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6981

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6986

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6991

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

6996

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7001

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7006

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7011

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7017

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7022

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7027

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7032

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7037

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7042

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7047

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7052

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7057

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7062

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7067

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7072

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7077

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7082

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7087

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7092

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7097

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7102

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7107

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7112

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7118

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7159

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7164

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7170

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7175

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7180

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7185

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7190

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7195

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7201

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7206

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7211

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7217

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7222

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7227

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7232

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7237

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7242

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7247

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7253

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7258

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7263

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7268

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7273

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7278

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7283

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7288

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7293

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7298

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7303

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7308

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7313

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7318

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7323

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7328

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7333

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7338

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7343

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7348

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7354

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7394

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7399

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7405

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7410

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7415

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7420

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7425

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7430

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7436

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7441

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7446

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7452

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7457

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7462

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7467

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7472

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7477

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7482

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7488

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7493

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7498

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7503

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7508

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7513

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7518

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7523

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7528

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7533

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7538

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7543

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7548

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7553

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7558

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7563

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7568

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7573

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7578

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7583

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7589

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7629

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7634

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7640

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7645

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7650

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7655

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7660

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7665

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7671

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7676

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7681

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7687

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7692

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7697

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7702

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7707

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7712

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7717

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7723

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7728

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7733

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7738

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7743

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7748

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7753

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7758

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7763

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7768

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7773

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7778

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7783

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7788

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7793

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7798

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7803

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7808

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7813

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7818

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

7824

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8013

pr_err("error: channel symbolrate is zero!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

8058

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8063

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8068

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8073

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8078

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8083

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8088

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8100

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8119

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8131

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8137

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8143

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8154

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8163

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8168

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8177

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8183

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8188

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8193

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8199

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8205

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8210

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8215

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8220

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8225

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8230

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8235

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8241

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8246

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8252

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8258

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8263

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8268

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8278

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8283

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8288

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8296

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8301

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8306

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8317

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8322

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8327

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8332

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8337

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8342

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8347

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8352

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8357

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8362

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8367

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8372

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8377

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8382

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8387

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8392

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8397

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8402

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8407

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8412

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8418

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8423

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8428

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8433

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8438

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8447

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8452

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8458

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8463

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8468

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8479

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8485

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8494

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8499

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8507

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8512

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8519

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8524

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8534

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8539

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8549

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8556

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8563

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8570

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8577

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8589

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8596

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8601

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8606

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8619

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8636

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8643

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8648

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8653

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8682

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8687

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8694

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8699

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8705

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8710

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8720

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8726

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8731

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8738

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8743

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8748

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8755

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8764

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8771

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8776

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8783

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8788

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8796

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8801

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8809

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8814

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8820

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8828

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8834

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8880

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8889

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8906

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8911

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8924

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8929

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8936

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8958

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8964

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

8969

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9027

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9035

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9053

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9118

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9129

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9149

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9155

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9176

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9183

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9190

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9197

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9204

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9211

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9231

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9238

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9245

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9252

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9259

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9265

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9313

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9319

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9325

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9331

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9337

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9386

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9392

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9407

pr_err("error: rf_agc_max == rf_agc_min\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

9417

pr_err("error: if_agc_top == if_agc_sns\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

9424

pr_err("error: if_agc_sns is zero!\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

9491

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9497

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9503

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9557

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9640

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9760

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9766

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9772

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9778

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9783

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9789

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9794

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9799

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9804

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9809

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9815

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9843

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9870

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9879

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9953

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9958

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9963

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drx39xyj/drxj.c

9995

pr_err("error %d\n", rc);

drivers/media/dvb-frontends/drxk_hard.c

1002

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1047

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1218

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1261

pr_err("SIO not ready\n");

drivers/media/dvb-frontends/drxk_hard.c

1267

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1323

pr_err("Firmware is corrupted.\n");

drivers/media/dvb-frontends/drxk_hard.c

1329

pr_err("Error %d while loading firmware\n", status);

drivers/media/dvb-frontends/drxk_hard.c

1370

pr_err("SIO not ready\n");

drivers/media/dvb-frontends/drxk_hard.c

1402

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1426

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1454

pr_err("SCU not ready\n");

drivers/media/dvb-frontends/drxk_hard.c

1493

pr_err("%s while sending cmd 0x%04x with params:", p, cmd);

drivers/media/dvb-frontends/drxk_hard.c

1501

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1537

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1642

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1700

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1781

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1832

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1872

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1893

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

1939

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2077

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2263

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

239

pr_err("i2c write error at addr 0x%02x\n", adr);

drivers/media/dvb-frontends/drxk_hard.c

2393

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2414

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2546

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

262

pr_err("i2c read error at addr 0x%02x\n", adr);

drivers/media/dvb-frontends/drxk_hard.c

2746

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2764

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2806

pr_err("SIO not ready\n");

drivers/media/dvb-frontends/drxk_hard.c

2812

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2853

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2897

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2963

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

2998

pr_err("%s: mode %d is not DVB-C\n",

drivers/media/dvb-frontends/drxk_hard.c

3157

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3172

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3294

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3306

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3320

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3340

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3376

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3399

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3439

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3652

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

3686

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

4022

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

4073

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

4086

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

4123

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

4212

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

435

pr_err("%s: i2c write error at addr 0x%02x\n",

drivers/media/dvb-frontends/drxk_hard.c

4399

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

4595

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

4789

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

492

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

4986

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5182

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5210

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5279

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5304

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5647

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5819

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5906

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5931

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5956

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

5994

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

6218

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

6231

pr_err("Could not load firmware file %s.\n",

drivers/media/dvb-frontends/drxk_hard.c

6306

pr_err("Error: get_if_frequency() not defined at tuner. Can't work without it!\n");

drivers/media/dvb-frontends/drxk_hard.c

6812

pr_err("not found\n");

drivers/media/dvb-frontends/drxk_hard.c

762

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/drxk_hard.c

808

pr_err("Clock Frequency is unknown\n");

drivers/media/dvb-frontends/drxk_hard.c

838

pr_err("Spin %d unknown\n", (sio_top_jtagid_lo >> 29) & 0xF);

drivers/media/dvb-frontends/drxk_hard.c

947

pr_err("DeviceID 0x%02x not supported\n",

drivers/media/dvb-frontends/drxk_hard.c

960

pr_err("Error %d on %s\n", status, __func__);

drivers/media/dvb-frontends/dvb-pll.c

357

pr_err("%s: i2c_transfer failed:%d",

drivers/media/dvb-frontends/dvb-pll.c

427

pr_err("%s: i2c_transfer failed:%d",

drivers/media/dvb-frontends/gp8psk-fe.c

331

pr_err("Error! gp8psk-fe ops not defined.\n");

drivers/media/dvb-frontends/lgdt3306a.c

137

pr_err("error (addr %02x %02x <- %02x, err = %i)\n",

drivers/media/dvb-frontends/lgdt3306a.c

161

pr_err("error (addr %02x reg %04x error (ret == %i)\n",

drivers/media/dvb-frontends/lgdt3306a.c

59

pr_err("error %d on line %d\n", ret, __LINE__); \

drivers/media/dvb-frontends/lgdt3306a.c

913

pr_err("Bad xtalMHz=%d\n", state->cfg->xtalMHz);

drivers/media/dvb-frontends/nxt200x.c

1181

pr_err("Unknown/Unsupported NXT chip: %*ph\n", 5, buf);

drivers/media/dvb-frontends/nxt200x.c

866

pr_err("%s: No firmware uploaded (timeout or file not found?)\n",

drivers/media/dvb-frontends/nxt200x.c

874

pr_err("%s: Writing firmware to device failed\n", __func__);

drivers/media/dvb-frontends/nxt200x.c

933

pr_err("%s: No firmware uploaded (timeout or file not found?)\n",

drivers/media/dvb-frontends/nxt200x.c

941

pr_err("%s: Writing firmware to device failed\n", __func__);

drivers/media/dvb-frontends/tda8261.c

121

pr_err("%s: I/O Error\n", __func__);

drivers/media/dvb-frontends/tda8261.c

129

pr_err("%s: I/O Error\n", __func__);

drivers/media/dvb-frontends/tda8261.c

34

pr_err("%s: read error, err=%d\n", __func__, err);

drivers/media/dvb-frontends/tda8261.c

46

pr_err("%s: write error, err=%d\n", __func__, err);

drivers/media/dvb-frontends/tda8261.c

60

pr_err("%s: I/O Error\n", __func__);

drivers/media/dvb-frontends/tda8261_cfg.h

17

pr_err("%s: Invalid parameter\n", __func__);

drivers/media/dvb-frontends/tda8261_cfg.h

35

pr_err("%s: Invalid parameter\n", __func__);

drivers/media/i2c/s5c73m3/s5c73m3-spi.c

48

pr_err("SPI device is uninitialized\n");

drivers/media/i2c/tc358743.c

2294

pr_err("%s: failed to register the cec device\n", __func__);

drivers/media/mc/mc-devnode.c

219

pr_err("could not get a free minor\n");

drivers/media/mc/mc-devnode.c

250

pr_err("%s: cdev_device_add failed\n", __func__);

drivers/media/mmc/siano/smssdio.c

140

pr_err("Unable to read interrupt register!\n");

drivers/media/mmc/siano/smssdio.c

147

pr_err("Unable to allocate data buffer!\n");

drivers/media/mmc/siano/smssdio.c

156

pr_err("Error %d reading initial block!\n", ret);

drivers/media/mmc/siano/smssdio.c

197

pr_err("Error %d reading data from card!\n", ret);

drivers/media/mmc/siano/smssdio.c

215

pr_err("Error %d reading data from card!\n",

drivers/media/pci/bt8xx/bttv-cards.c

4337

pr_err("PCI-8604PW locked until reset\n");

drivers/media/pci/bt8xx/bttv-cards.c

4340

pr_err("PCI-8604PW in unknown state %i\n", state);

drivers/media/pci/bt8xx/bttv-cards.c

4357

pr_err("PCI-8604PW invalid transition %i -> %i\n",

drivers/media/pci/bt8xx/bttv-driver.c

3048

pr_err("%d: IRQ lockup, cleared int mask [",

drivers/media/pci/bt8xx/bttv-driver.c

3051

pr_err("%d: IRQ lockup, clearing GPINT from int mask [",

drivers/media/pci/bt8xx/bttv-driver.c

3148

pr_err("%d: device_create_file 'card' failed\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-driver.c

3221

pr_err("out of memory\n");

drivers/media/pci/bt8xx/bttv-driver.c

3289

pr_err("%d: ioremap() failed\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-driver.c

3302

pr_err("%d: can't get IRQ %d\n",

drivers/media/pci/bt8xx/bttv-driver.c

732

pr_err("BUG! (btres)\n");

drivers/media/pci/bt8xx/dst.c

1007

pr_err("DST TYpe = MULTI FE\n");

drivers/media/pci/bt8xx/dst.c

1021

pr_err("DST type has TS=188\n");

drivers/media/pci/bt8xx/dst.c

1031

pr_err("DST has Daughterboard\n");

drivers/media/pci/bt8xx/dst.c

1039

pr_err("Forcing [%s] to TS188\n", state->fw_name);

drivers/media/pci/bt8xx/dst.c

108

pr_err("dst_gpio_outb ERROR !\n");

drivers/media/pci/bt8xx/dst.c

1090

pr_err("Recognise [%s]\n", p_dst_type->device_id);

drivers/media/pci/bt8xx/dst.c

1099

pr_err("Unsupported\n");

drivers/media/pci/bt8xx/dst.c

1107

pr_err("Unsupported\n");

drivers/media/pci/bt8xx/dst.c

1115

pr_err("[%s] has a [%s]\n",

drivers/media/pci/bt8xx/dst.c

1124

pr_err("Unable to recognize %s or %s\n", &state->rxbuffer[0], &state->rxbuffer[1]);

drivers/media/pci/bt8xx/dst.c

1125

pr_err("please email linux-dvb@linuxtv.org with this type in");

drivers/media/pci/bt8xx/dst.c

113

pr_err("dst_gpio_outb ERROR !\n");

drivers/media/pci/bt8xx/dst.c

1142

pr_err("RDC 8820 RESET Failed.\n");

drivers/media/pci/bt8xx/dst.c

1150

pr_err("DST Initialization Failed.\n");

drivers/media/pci/bt8xx/dst.c

1155

pr_err("unknown device.\n");

drivers/media/pci/bt8xx/dst.c

1198

pr_err("Recovery Failed.\n");

drivers/media/pci/bt8xx/dst.c

1204

pr_err("PIO Disable Failed.\n");

drivers/media/pci/bt8xx/dst.c

126

pr_err("dst_gpio_outb ERROR !\n");

drivers/media/pci/bt8xx/dst.c

131

pr_err("dst_gpio_outb ERROR !\n");

drivers/media/pci/bt8xx/dst.c

141

pr_err("dst_gpio_outb ERROR !\n");

drivers/media/pci/bt8xx/dst.c

152

pr_err("dst_gpio_outb ERROR !\n");

drivers/media/pci/bt8xx/dst.c

169

pr_err("dst_gpio_inb ERROR !\n");

drivers/media/pci/bt8xx/dst.c

1716

pr_err("unknown DST type. please report to the LinuxTV.org DVB mailinglist.\n");

drivers/media/pci/bt8xx/dst.c

211

pr_err("PIO Enable Failed\n");

drivers/media/pci/bt8xx/dst.c

215

pr_err("RDC 8820 State RESET Failed.\n");

drivers/media/pci/bt8xx/dst.c

533

pr_err("DST type flags :\n");

drivers/media/pci/bt8xx/dst.c

535

pr_err(" 0x%x newtuner\n", DST_TYPE_HAS_TS188);

drivers/media/pci/bt8xx/dst.c

537

pr_err(" 0x%x newtuner 2\n", DST_TYPE_HAS_NEWTUNE_2);

drivers/media/pci/bt8xx/dst.c

539

pr_err(" 0x%x ts204\n", DST_TYPE_HAS_TS204);

drivers/media/pci/bt8xx/dst.c

541

pr_err(" 0x%x VLF\n", DST_TYPE_HAS_VLF);

drivers/media/pci/bt8xx/dst.c

543

pr_err(" 0x%x symdiv\n", DST_TYPE_HAS_SYMDIV);

drivers/media/pci/bt8xx/dst.c

545

pr_err(" 0x%x firmware version = 1\n", DST_TYPE_HAS_FW_1);

drivers/media/pci/bt8xx/dst.c

547

pr_err(" 0x%x firmware version = 2\n", DST_TYPE_HAS_FW_2);

drivers/media/pci/bt8xx/dst.c

549

pr_err(" 0x%x firmware version = 3\n", DST_TYPE_HAS_FW_3);

drivers/media/pci/bt8xx/dst.c

550

pr_err("\n");

drivers/media/pci/bt8xx/dst.c

891

pr_err("MAC Address=[%pM]\n", state->mac_address);

drivers/media/pci/bt8xx/dst.c

905

pr_err("Firmware Ver = %x.%x Build = %02x, on %x:%x, %x-%x-20%02x\n",

drivers/media/pci/bt8xx/dst.c

927

pr_err("Device Model=[%s]\n", &state->card_info[0]);

drivers/media/pci/bt8xx/dst.c

932

pr_err("DST has [%s] tuner, tuner type=[%d]\n",

drivers/media/pci/bt8xx/dst.c

950

pr_err("Vendor=[%s]\n", &state->vendor[0]);

drivers/media/pci/bt8xx/dst.c

96

pr_err("dst_gpio_inb error (err == %i)\n", err);

drivers/media/pci/bt8xx/dst.c

966

pr_err("Cmd=[0x04] failed\n");

drivers/media/pci/bt8xx/dst.c

972

pr_err("Found a STV0299 NIM\n");

drivers/media/pci/bt8xx/dst.c

986

pr_err("Cmd=[0x10], failed\n");

drivers/media/pci/bt8xx/dst.c

992

pr_err("Found a MB86A15 NIM\n");

drivers/media/pci/bt8xx/dvb-bt8xx.c

662

pr_err("No memory\n");

drivers/media/pci/bt8xx/dvb-bt8xx.c

672

pr_err("%s: Could not find a Twinhan DST\n", __func__);

drivers/media/pci/bt8xx/dvb-bt8xx.c

702

pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",

drivers/media/pci/bt8xx/dvb-bt8xx.c

709

pr_err("Frontend registration failed!\n");

drivers/media/pci/bt8xx/dvb-bt8xx.c

723

pr_err("dvb_register_adapter failed (errno = %d)\n", result);

drivers/media/pci/bt8xx/dvb-bt8xx.c

743

pr_err("dvb_dmx_init failed (errno = %d)\n", result);

drivers/media/pci/bt8xx/dvb-bt8xx.c

753

pr_err("dvb_dmxdev_init failed (errno = %d)\n", result);

drivers/media/pci/bt8xx/dvb-bt8xx.c

761

pr_err("dvb_dmx_init failed (errno = %d)\n", result);

drivers/media/pci/bt8xx/dvb-bt8xx.c

769

pr_err("dvb_dmx_init failed (errno = %d)\n", result);

drivers/media/pci/bt8xx/dvb-bt8xx.c

775

pr_err("dvb_dmx_init failed (errno = %d)\n", result);

drivers/media/pci/bt8xx/dvb-bt8xx.c

781

pr_err("dvb_net_init failed (errno = %d)\n", result);

drivers/media/pci/bt8xx/dvb-bt8xx.c

885

pr_err("Unknown bttv card type: %d\n", sub->core->type);

drivers/media/pci/bt8xx/dvb-bt8xx.c

893

pr_err("no pci device for card %d\n", card->bttv_nr);

drivers/media/pci/bt8xx/dvb-bt8xx.c

899

pr_err("unable to determine DMA core of card %d,\n", card->bttv_nr);

drivers/media/pci/bt8xx/dvb-bt8xx.c

900

pr_err("if you have the ALSA bt87x audio driver installed, try removing it.\n");

drivers/media/pci/cobalt/cobalt-driver.c

675

pr_err("cobalt: v4l2_device_register of card %d failed\n",

drivers/media/pci/cobalt/cobalt-irq.c

33

pr_err("no buffers!\n");

drivers/media/pci/cx18/cx18-mailbox.c

834

pr_err("cx == NULL (cmd=%x)\n", cmd);

drivers/media/pci/cx23885/cx23885-417.c

1045

pr_err("%s() f/w load failed\n", __func__);

drivers/media/pci/cx23885/cx23885-417.c

1050

pr_err("%s() mailbox < 0, error\n",

drivers/media/pci/cx23885/cx23885-417.c

1057

pr_err("ERROR: cx23417 firmware ping failed!\n");

drivers/media/pci/cx23885/cx23885-417.c

1063

pr_err("ERROR: cx23417 firmware get encoder :version failed!\n");

drivers/media/pci/cx23885/cx23885-417.c

763

pr_err("Firmware and/or mailbox pointer not initialized or corrupted, signature = 0x%x, cmd = %s\n",

drivers/media/pci/cx23885/cx23885-417.c

773

pr_err("ERROR: Mailbox appears to be in use (%x), cmd = %s\n",

drivers/media/pci/cx23885/cx23885-417.c

803

pr_err("ERROR: API Mailbox timeout\n");

drivers/media/pci/cx23885/cx23885-417.c

880

pr_err("Mailbox signature values not found!\n");

drivers/media/pci/cx23885/cx23885-417.c

915

pr_err("%s: Error with mc417_register_write\n",

drivers/media/pci/cx23885/cx23885-417.c

924

pr_err("ERROR: Hotplug firmware request failed (%s).\n",

drivers/media/pci/cx23885/cx23885-417.c

926

pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n");

drivers/media/pci/cx23885/cx23885-417.c

931

pr_err("ERROR: Firmware size mismatch (have %zu, expected %d)\n",

drivers/media/pci/cx23885/cx23885-417.c

938

pr_err("ERROR: Firmware magic mismatch, wrong file?\n");

drivers/media/pci/cx23885/cx23885-417.c

950

pr_err("ERROR: Loading firmware failed!\n");

drivers/media/pci/cx23885/cx23885-417.c

961

pr_err("ERROR: Reading firmware failed!\n");

drivers/media/pci/cx23885/cx23885-417.c

968

pr_err("ERROR: Firmware load failed (checksum mismatch).\n");

drivers/media/pci/cx23885/cx23885-417.c

993

pr_err("%s: Error with mc417_register_write\n",

drivers/media/pci/cx23885/cx23885-alsa.c

318

pr_err("BUG: cx23885 can't find device struct. Can't proceed with open\n");

drivers/media/pci/cx23885/cx23885-alsa.c

582

pr_err("%s(): Failed to register analog audio adapter\n",

drivers/media/pci/cx23885/cx23885-cards.c

1491

pr_err("%s(): Unknown command 0x%x.\n",

drivers/media/pci/cx23885/cx23885-cards.c

2514

pr_err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware.",

drivers/media/pci/cx23885/cx23885-core.c

1048

pr_err("%s() Failed to register analog video adapters on VID_A\n",

drivers/media/pci/cx23885/cx23885-core.c

1058

pr_err("%s() Failed to register dvb adapters on VID_B\n",

drivers/media/pci/cx23885/cx23885-core.c

1064

pr_err("%s() Failed to register 417 on VID_B\n",

drivers/media/pci/cx23885/cx23885-core.c

1074

pr_err("%s() Failed to register dvb on VID_C\n",

drivers/media/pci/cx23885/cx23885-core.c

1080

pr_err("%s() Failed to register 417 on VID_C\n",

drivers/media/pci/cx23885/cx23885-core.c

1428

pr_err("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n",

drivers/media/pci/cx23885/cx23885-core.c

1694

pr_err("%s: V4L mpeg risc op code error, status = 0x%x\n",

drivers/media/pci/cx23885/cx23885-core.c

1756

pr_err("%s: mpeg risc op code error\n", dev->name);

drivers/media/pci/cx23885/cx23885-core.c

2004

pr_err("%s: Setting GPIO on encoder ports\n",

drivers/media/pci/cx23885/cx23885-core.c

2021

pr_err("%s: Clearing GPIO moving on encoder ports\n",

drivers/media/pci/cx23885/cx23885-core.c

2038

pr_err("%s: Reading GPIO moving on encoder ports\n",

drivers/media/pci/cx23885/cx23885-core.c

2059

pr_err("%s: Enabling GPIO on encoder ports\n",

drivers/media/pci/cx23885/cx23885-core.c

2172

pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);

drivers/media/pci/cx23885/cx23885-core.c

2179

pr_err("%s: can't get IRQ %d\n",

drivers/media/pci/cx23885/cx23885-core.c

725

pr_err("%s: can't get MMIO memory @ 0x%llx\n",

drivers/media/pci/cx23885/cx23885-core.c

844

pr_err("%s() New hardware revision found 0x%x\n",

drivers/media/pci/cx23885/cx23885-core.c

851

pr_err("%s() Hardware revision unknown 0x%x\n",

drivers/media/pci/cx23885/cx23885-core.c

984

pr_err("CORE %s No more PCIe resources for subsystem: %04x:%04x\n",

drivers/media/pci/cx23885/cx23885-dvb.c

1519

pr_err("%s/2: xc4000 attach failed\n",

drivers/media/pci/cx23885/cx23885-dvb.c

1592

pr_err("No LNBH24 found!\n");

drivers/media/pci/cx23885/cx23885-dvb.c

1612

pr_err("No LNBH24 found!\n");

drivers/media/pci/cx23885/cx23885-dvb.c

2557

pr_err("%s: frontend initialization failed\n",

drivers/media/pci/cx23885/cx23885-dvb.c

2646

pr_err("%s() failed to alloc\n", __func__);

drivers/media/pci/cx23885/cx23885-dvb.c

2683

pr_err("%s() dvb_register failed err = %d\n",

drivers/media/pci/cx23885/cx23885-f300.c

115

pr_err("%s: timeout, the slave no response\n",

drivers/media/pci/cx23885/cx23885-i2c.c

144

pr_err(" ERR: %d\n", retval);

drivers/media/pci/cx23885/cx23885-i2c.c

205

pr_err(" ERR: %d\n", retval);

drivers/media/pci/cx23885/cx23885-video.c

1058

pr_err("%s() No analog tuner, aborting\n", __func__);

drivers/media/pci/cx23885/cx23885-video.c

188

pr_err("%s() error\n", __func__);

drivers/media/pci/cx23885/netup-eeprom.c

45

pr_err("eeprom i2c read error, status=%d\n", ret);

drivers/media/pci/cx23885/netup-init.c

33

pr_err("%s: i2c write error!\n", __func__);

drivers/media/pci/cx23885/netup-init.c

57

pr_err("%s: i2c write error!\n", __func__);

drivers/media/pci/cx23885/netup-init.c

77

pr_err("%s: i2c write error!\n", __func__);

drivers/media/pci/cx23885/netup-init.c

85

pr_err("%s: i2c read error!\n", __func__);

drivers/media/pci/cx25821/cx25821-alsa.c

453

pr_err("DEBUG: cx25821 can't find device struct. Can't proceed with open\n");

drivers/media/pci/cx25821/cx25821-alsa.c

736

pr_err("ERROR %s: can't get IRQ %d for ALSA\n", chip->dev->name,

drivers/media/pci/cx25821/cx25821-alsa.c

792

pr_err("%s failed to find a cx25821 driver.\n", __func__);

drivers/media/pci/cx25821/cx25821-core.c

1301

pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);

drivers/media/pci/cx25821/cx25821-core.c

1310

pr_err("%s: can't get IRQ %d\n", dev->name, pci_dev->irq);

drivers/media/pci/cx25821/cx25821-core.c

818

pr_err("%s: can't get MMIO memory @ 0x%llx\n",

drivers/media/pci/cx25821/cx25821-core.c

891

pr_err("%s: No more PCIe resources for subsystem: %04x:%04x\n",

drivers/media/pci/cx25821/cx25821-i2c.c

156

pr_err(" ERR: %d\n", retval);

drivers/media/pci/cx25821/cx25821-i2c.c

220

pr_err(" ERR: %d\n", retval);

drivers/media/pci/cx25821/cx25821.h

364

pr_err("(%d): " fmt, dev->board, ##args)

drivers/media/pci/cx88/cx88-alsa.c

265

pr_err("IRQ loop detected, disabling interrupts\n");

drivers/media/pci/cx88/cx88-alsa.c

410

pr_err("BUG: cx88 can't find device struct. Can't proceed with open\n");

drivers/media/pci/cx88/cx88-blackbird.c

466

pr_err("Hotplug firmware request failed (%s).\n",

drivers/media/pci/cx88/cx88-blackbird.c

468

pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n");

drivers/media/pci/cx88/cx88-blackbird.c

473

pr_err("Firmware size mismatch (have %zd, expected %d)\n",

drivers/media/pci/cx88/cx88-blackbird.c

480

pr_err("Firmware magic mismatch, wrong file?\n");

drivers/media/pci/cx88/cx88-blackbird.c

502

pr_err("Firmware load might have failed (checksum mismatch).\n");

drivers/media/pci/cx88/cx88-cards.c

3261

pr_err("Error - i2c private data undefined.\n");

drivers/media/pci/cx88/cx88-cards.c

3268

pr_err("Error - device struct undefined.\n");

drivers/media/pci/cx88/cx88-cards.c

3286

pr_err("Error: Calling callback for tuner %d\n",

drivers/media/pci/cx88/cx88-cards.c

3299

pr_err("Your board has no valid PCI Subsystem ID and thus can't\n");

drivers/media/pci/cx88/cx88-cards.c

3300

pr_err("be autodetected. Please pass card=<n> insmod option to\n");

drivers/media/pci/cx88/cx88-cards.c

3301

pr_err("workaround that. Redirect complaints to the vendor of\n");

drivers/media/pci/cx88/cx88-cards.c

3302

pr_err("the TV card\n");

drivers/media/pci/cx88/cx88-cards.c

3304

pr_err("Your board isn't known (yet) to the driver. You can\n");

drivers/media/pci/cx88/cx88-cards.c

3305

pr_err("try to pick one of the existing card configs via\n");

drivers/media/pci/cx88/cx88-cards.c

3306

pr_err("card=<n> insmod option. Updating to the latest\n");

drivers/media/pci/cx88/cx88-cards.c

3307

pr_err("version might help as well.\n");

drivers/media/pci/cx88/cx88-cards.c

3309

pr_err("Here is a list of valid choices for the card=<n> insmod option:\n");

drivers/media/pci/cx88/cx88-cards.c

3311

pr_err(" card=%d -> %s\n", i, cx88_boards[i].name);

drivers/media/pci/cx88/cx88-cards.c

3687

pr_err("func %d: Can't get MMIO memory @ 0x%llx, subsystem: %04x:%04x\n",

drivers/media/pci/cx88/cx88-core.c

770

pr_err("pll out of range\n");

drivers/media/pci/cx88/cx88-dvb.c

1172

pr_err("built without vp3054 support\n");

drivers/media/pci/cx88/cx88-dvb.c

1610

pr_err("The frontend of your DVB/ATSC card isn't supported yet\n");

drivers/media/pci/cx88/cx88-dvb.c

1615

pr_err("frontend initialization failed\n");

drivers/media/pci/cx88/cx88-dvb.c

170

pr_err("%s() No frontend found\n", __func__);

drivers/media/pci/cx88/cx88-dvb.c

1768

pr_err("%s() failed to get frontend(%d)\n",

drivers/media/pci/cx88/cx88-dvb.c

1797

pr_err("dvb_register failed (err = %d)\n", err);

drivers/media/pci/cx88/cx88-dvb.c

618

pr_err("dvb frontend not attached. Can't attach xc3028\n");

drivers/media/pci/cx88/cx88-dvb.c

631

pr_err("xc3028 attach failed\n");

drivers/media/pci/cx88/cx88-dvb.c

654

pr_err("dvb frontend not attached. Can't attach xc4000\n");

drivers/media/pci/cx88/cx88-dvb.c

661

pr_err("xc4000 attach failed\n");

drivers/media/pci/cx88/cx88-dvb.c

794

pr_err("%s() failed to alloc\n", __func__);

drivers/media/pci/cx88/cx88-dvb.c

994

pr_err("no i2c-bus available, cannot attach dvb drivers\n");

drivers/media/pci/cx88/cx88-i2c.c

170

pr_err("i2c register FAILED\n");

drivers/media/pci/cx88/cx88-mpeg.c

156

pr_err("%s() Failed. Unsupported value in .mpeg (0x%08x)\n",

drivers/media/pci/cx88/cx88-mpeg.c

394

pr_err("Oops: no 32bit PCI DMA ???\n");

drivers/media/pci/cx88/cx88-mpeg.c

415

pr_err("can't get IRQ %d\n", dev->pci->irq);

drivers/media/pci/cx88/cx88-mpeg.c

472

pr_err("can't enable device\n");

drivers/media/pci/cx88/cx88-mpeg.c

479

pr_err("can't enable device\n");

drivers/media/pci/cx88/cx88-mpeg.c

609

pr_err("cx8802_driver is invalid\n");

drivers/media/pci/cx88/cx88-mpeg.c

642

pr_err("cx8802 probe failed, err = %d\n", err);

drivers/media/pci/cx88/cx88-mpeg.c

685

pr_err("cx8802 driver remove failed (%d)\n",

drivers/media/pci/cx88/cx88-mpeg.c

771

pr_err("cx8802 driver remove failed (%d)\n",

drivers/media/pci/cx88/cx88-video.c

1292

pr_err("Oops: no 32bit PCI DMA ???\n");

drivers/media/pci/cx88/cx88-video.c

1309

pr_err("can't get IRQ %d\n", pci_dev->irq);

drivers/media/pci/cx88/cx88-video.c

1455

pr_err("can't register video device\n");

drivers/media/pci/cx88/cx88-video.c

1472

pr_err("can't register vbi device\n");

drivers/media/pci/cx88/cx88-video.c

1487

pr_err("can't register radio device\n");

drivers/media/pci/cx88/cx88-video.c

1500

pr_err("failed to create cx88 audio thread, err=%d\n",

drivers/media/pci/cx88/cx88-vp3054-i2c.c

120

pr_err("vp3054_i2c register FAILED\n");

drivers/media/pci/intel/ipu6/ipu6-isys-video.c

852

pr_err("ipu6-isys: no available stream\n");

drivers/media/pci/ivtv/ivtv-alsa-main.c

187

pr_err("ivtv-alsa: %s: struct v4l2_device * is NULL\n",

drivers/media/pci/ivtv/ivtv-alsa-main.c

194

pr_err("ivtv-alsa itv is NULL\n");

drivers/media/pci/ivtv/ivtv-alsa-main.c

242

pr_err("ivtv-alsa: %s: struct v4l2_device * is NULL\n",

drivers/media/pci/ivtv/ivtv-alsa.h

55

pr_err("%s-alsa: " fmt, v4l2_dev->name , ## args)

drivers/media/pci/ivtv/ivtv-driver.c

1412

pr_err("Exiting, ivtv_first_minor must be between 0 and %d\n",

drivers/media/pci/ivtv/ivtv-driver.c

1423

pr_err("Error detecting PCI card\n");

drivers/media/pci/ivtv/ivtvfb.c

1275

pr_err("ivtvfb_card_id parameter is out of range (valid range: -1 - %d)\n",

drivers/media/pci/ivtv/ivtvfb.c

1284

pr_err("no cards found\n");

drivers/media/pci/saa7134/saa7134-alsa.c

1150

pr_err("%s: can't get IRQ %d for ALSA\n",

drivers/media/pci/saa7134/saa7134-alsa.c

803

pr_err("BUG: saa7134 can't find device struct. Can't proceed with open\n");

drivers/media/pci/saa7134/saa7134-cards.c

7367

pr_err("saa7134: Error - device struct undefined.\n");

drivers/media/pci/saa7134/saa7134-cards.c

7801

pr_err("EEPROM read failure\n");

drivers/media/pci/saa7134/saa7134-cards.c

7816

pr_err("%s Can't determine tuner type %x from EEPROM\n",

drivers/media/pci/saa7134/saa7134-cards.c

7838

pr_err("%s Can't determine tuner type %x from EEPROM\n",

drivers/media/pci/saa7134/saa7134-cards.c

7842

pr_err("%s unexpected config structure\n", dev->name);

drivers/media/pci/saa7134/saa7134-core.c

1108

pr_err("%s: can't get MMIO memory @ 0x%llx\n",

drivers/media/pci/saa7134/saa7134-core.c

1117

pr_err("%s: can't ioremap() MMIO memory\n",

drivers/media/pci/saa7134/saa7134-core.c

1130

pr_err("%s: can't get IRQ %d\n",

drivers/media/pci/saa7134/saa7134-core.c

1233

pr_err("failed to create media graph\n");

drivers/media/pci/saa7134/saa7134-core.c

836

pr_err("failed to initialize demod pad!\n");

drivers/media/pci/saa7134/saa7134-core.c

840

pr_err("failed to register demod entity!\n");

drivers/media/pci/saa7134/saa7134-core.c

852

pr_err("failed to initialize video media entity!\n");

drivers/media/pci/saa7134/saa7134-core.c

858

pr_err("failed to initialize vbi media entity!\n");

drivers/media/pci/saa7134/saa7134-core.c

904

pr_err("failed to initialize input pad[%d]!\n", i);

drivers/media/pci/saa7134/saa7134-core.c

908

pr_err("failed to register input entity %d!\n", i);

drivers/media/pci/saa7134/saa7134-core.c

923

pr_err("failed to initialize input pad[%d]!\n", i);

drivers/media/pci/saa7134/saa7134-core.c

927

pr_err("failed to register input entity %d!\n", i);

drivers/media/pci/saa7134/saa7134-dvb.c

1232

pr_err("%s() failed to alloc\n", __func__);

drivers/media/pci/saa7134/saa7134-dvb.c

1908

pr_err("%s/2: xc3028 attach failed\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1915

pr_err("%s/dvb: frontend initialization failed\n", dev->name);

drivers/media/pci/saa7134/saa7134-go7007.c

169

pr_err("saa7134-go7007: unable to reset the GO7007\n");

drivers/media/pci/saa7134/saa7134-go7007.c

193

pr_err("saa7134-go7007: device is hung, status reg = 0x%04x\n",

drivers/media/pci/saa7134/saa7134-go7007.c

360

pr_err("saa7134-go7007: device is hung, status reg = 0x%04x\n",

drivers/media/pci/saa7134/saa7134-i2c.c

372

pr_err("%s: EEPROM i2c gate close failure\n",

drivers/media/pci/saa7134/saa7134-input.c

767

pr_err("Oops: IR config error [card=%d]\n", dev->board);

drivers/media/pci/saa7134/saa7134-tvaudio.c

667

pr_err("dsp access wait timeout [bit=%s]\n",

drivers/media/pci/saa7134/saa7134-vbi.c

115

pr_err("The buffer is not page-aligned\n");

drivers/media/pci/saa7134/saa7134-video.c

620

pr_err("Couldn't change link %s->%s to %s. Error %d\n",

drivers/media/pci/saa7134/saa7134-video.c

736

pr_err("The buffer is not page-aligned\n");

drivers/media/pci/saa7146/hexium_gemini.c

163

pr_err("hexium_init_done() failed for address 0x%02x\n",

drivers/media/pci/saa7146/hexium_gemini.c

195

pr_err("hexium_init_done: hexium_set_standard() failed for address 0x%02x\n",

drivers/media/pci/saa7146/hexium_gemini.c

300

pr_err("cannot register capture v4l2 device. skipping.\n");

drivers/media/pci/saa7146/hexium_orion.c

289

pr_err("failed for address 0x%02x\n", i);

drivers/media/pci/saa7146/hexium_orion.c

365

pr_err("Error in saa7146_vv_init()\n");

drivers/media/pci/saa7146/hexium_orion.c

373

pr_err("cannot register capture v4l2 device. skipping.\n");

drivers/media/pci/saa7146/hexium_orion.c

377

pr_err("found 'hexium orion' frame grabber-%d\n", hexium_num);

drivers/media/pci/saa7146/mxb.c

261

pr_err("did not find all i2c devices. aborting\n");

drivers/media/pci/saa7146/mxb.c

521

pr_err("VIDIOC_S_INPUT: could not address saa7111a\n");

drivers/media/pci/ttpci/budget-av.c

1333

pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",

drivers/media/pci/ttpci/budget-av.c

1345

pr_err("Frontend registration failed!\n");

drivers/media/pci/ttpci/budget-av.c

1467

pr_err("cannot init vv subsystem\n");

drivers/media/pci/ttpci/budget-av.c

1479

pr_err("cannot register capture v4l2 device\n");

drivers/media/pci/ttpci/budget-av.c

1495

pr_err("KNC1-%d: Could not read MAC from KNC1 card\n",

drivers/media/pci/ttpci/budget-av.c

357

pr_err("ci initialisation failed\n");

drivers/media/pci/ttpci/budget-ci.c

1362

pr_err("%s(): No LNBP21 found!\n", __func__);

drivers/media/pci/ttpci/budget-ci.c

1373

pr_err("%s(): No tda827x found!\n", __func__);

drivers/media/pci/ttpci/budget-ci.c

1385

pr_err("%s(): No LNBP21 found!\n", __func__);

drivers/media/pci/ttpci/budget-ci.c

1390

pr_err("%s(): No STB6000 found!\n", __func__);

drivers/media/pci/ttpci/budget-ci.c

1425

pr_err("%s(): No LNBP21 found!\n", __func__);

drivers/media/pci/ttpci/budget-ci.c

1439

pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",

drivers/media/pci/ttpci/budget-ci.c

1447

pr_err("Frontend registration failed!\n");

drivers/media/pci/ttpci/budget-ci.c

169

pr_err("IR interface initialisation failed\n");

drivers/media/pci/ttpci/budget-ci.c

228

pr_err("could not init driver for IR device (code %d)\n", error);

drivers/media/pci/ttpci/budget-ci.c

489

pr_err("CI interface detected, but initialisation failed.\n");

drivers/media/pci/ttpci/budget.c

620

pr_err("%s(): No LNBP21 found!\n", __func__);

drivers/media/pci/ttpci/budget.c

642

pr_err("%s(): No tda826x found!\n", __func__);

drivers/media/pci/ttpci/budget.c

645

pr_err("%s(): No LNBP21 found!\n", __func__);

drivers/media/pci/ttpci/budget.c

698

pr_err("%s(): No Intersil ISL6423 found!\n", __func__);

drivers/media/pci/ttpci/budget.c

702

pr_err("%s(): No STV6110(A) Silicon Tuner found!\n", __func__);

drivers/media/pci/ttpci/budget.c

756

pr_err("No LNBH24 found!\n");

drivers/media/pci/ttpci/budget.c

760

pr_err("%s(): No STV6110(A) Silicon Tuner found!\n", __func__);

drivers/media/pci/ttpci/budget.c

769

pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",

drivers/media/pci/ttpci/budget.c

781

pr_err("Frontend registration failed!\n");

drivers/media/pci/ttpci/budget.c

801

pr_err("==> failed\n");

drivers/media/pci/tw68/tw68-core.c

281

pr_err("%s: can't get MMIO memory @ 0x%llx\n",

drivers/media/pci/tw68/tw68-core.c

291

pr_err("%s: can't ioremap() MMIO memory\n",

drivers/media/pci/tw68/tw68-core.c

303

pr_err("%s: can't get IRQ %d\n",

drivers/media/pci/tw68/tw68-core.c

317

pr_err("%s: can't register video device\n",

drivers/media/pci/zoran/videocodec.c

117

pr_err("%s: no data\n", __func__);

drivers/media/pci/zoran/videocodec.c

173

pr_err("%s: no data!\n", __func__);

drivers/media/pci/zoran/videocodec.c

208

pr_err("%s: no data!\n", __func__);

drivers/media/pci/zoran/videocodec.c

46

pr_err("%s: no data\n", __func__);

drivers/media/platform/amphion/vpu_imx8q.c

206

pr_err("error: get sct handle fail: %d\n", ret);

drivers/media/platform/chips-media/coda/coda-bit.c

2339

pr_err("DEC_PIC_SUCCESS = %d\n", val);

drivers/media/platform/chips-media/coda/coda-bit.c

848

pr_err("IRAM is smaller than the search ram size\n");

drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c

55

pr_err("mtk-jpeg: write reg %x without %d align\n", reg, align);

drivers/media/platform/mediatek/mdp/mtk_mdp_core.h

240

pr_err("[MTK_MDP][ERROR] %s:%d: " fmt "\n", __func__, __LINE__, \

drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_scp.c

71

pr_err("Invalid fw_use %d (use a reasonable fw id here)\n", fw_use);

drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c

106

pr_err("Invalid fw_use %d (use a reasonable fw id here)\n", fw_use);

drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_util.c

27

pr_err(MTK_DBG_V4L2_STR "Invalid arguments, reg_idx=%d", reg_idx);

drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_av1_req_lat_if.c

1514

pr_err(MTK_DBG_V4L2_STR "cannot match reference[%d] 0x%llx\n", i,

drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_av1_req_lat_if.c

863

pr_err(MTK_DBG_V4L2_STR "av1_error: %s() fb_idx %d decrease ref_count error\n",

drivers/media/platform/mediatek/vcodec/decoder/vdec_vpu_if.c

112

pr_err(MTK_DBG_V4L2_STR "ap_inst_addr is NULL, did the SCP hang or crash?");

drivers/media/platform/mediatek/vcodec/encoder/venc_vpu_if.c

72

pr_err(MTK_DBG_V4L2_STR "venc_inst is NULL, did the SCP hang or crash?");

drivers/media/platform/mediatek/vpu/mtk_vpu.c

570

pr_err("VPU platform device is invalid\n");

drivers/media/platform/nxp/imx-pxp.c

1046

pr_err("Instance released before the end of transaction\n");

drivers/media/platform/nxp/mx2_emmaprp.c

348

pr_err("Instance released before the end of transaction\n");

drivers/media/platform/nxp/mx2_emmaprp.c

355

pr_err("PrP bus error occurred, this transfer is probably corrupted\n");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

248

pr_err("Exceeded maximum downscaling ratio (1/16))");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

333

pr_err("Plane address is wrong");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

402

pr_err("pixelformat format (0x%X) invalid\n",

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

525

pr_err("doesn't support negative values for top & left\n");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

646

pr_err("out of scaler range");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

667

pr_err("Horizontal scale ratio is out of range");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

674

pr_err("Vertical scale ratio is out of range");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

762

pr_err("Control handler of this context was created already");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

782

pr_err("Failed to create G-Scaler control handlers");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

836

pr_err("Invalid the number of color planes");

drivers/media/platform/samsung/exynos-gsc/gsc-core.c

869

pr_err("Local path input over-run interrupt has occurred!\n");

drivers/media/platform/samsung/exynos-gsc/gsc-core.h

492

pr_err("Wrong buffer/video queue type (%d)", type);

drivers/media/platform/samsung/exynos-gsc/gsc-m2m.c

178

pr_err("Wrong address");

drivers/media/platform/samsung/exynos-gsc/gsc-m2m.c

193

pr_err("Scaler setup error");

drivers/media/platform/samsung/exynos-gsc/gsc-m2m.c

329

pr_err("queue (%d) busy", f->type);

drivers/media/platform/samsung/exynos-gsc/gsc-m2m.c

537

pr_err("Out of scaler range");

drivers/media/platform/samsung/exynos-gsc/gsc-m2m.c

642

pr_err("Failed to initialize m2m context");

drivers/media/platform/samsung/exynos4-is/fimc-is.c

569

pr_err("ISR_NDONE: %d: %#x, %s\n", is->i2h_cmd.args[0],

drivers/media/platform/samsung/exynos4-is/fimc-is.c

574

pr_err("IS_ERROR_TIME_OUT\n");

drivers/media/platform/samsung/exynos4-is/fimc-is.c

591

pr_err("IS control sequence error: Not Ready\n");

drivers/media/platform/samsung/s5p-jpeg/jpeg-core.c

2480

pr_err("%s data will not fit into plane (%lu < %lu)\n",

drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c

38

pr_err("MFCWRITE(%p): %08x\n", r, (unsigned int)v); \

drivers/media/platform/ti/cal/cal.c

1134

pr_err("regmap init failed\n");

drivers/media/platform/ti/omap/omap_vout_vrfb.c

272

pr_err("%s: DMA interleaved prep error\n", __func__);

drivers/media/platform/ti/omap/omap_vout_vrfb.c

281

pr_err("%s: dmaengine_submit failed (%d)\n", __func__, cookie);

drivers/media/platform/ti/omap/omap_vout_vrfb.c

295

pr_err("%s: Timeout while waiting for DMA\n", __func__);

drivers/media/platform/ti/omap/omap_vout_vrfb.c

299

pr_err("%s: DMA completion %s status\n", __func__,

drivers/media/platform/ti/vpe/vpdma.c

1183

pr_err("failed to load firmware %s\n", VPDMA_FIRMWARE);

drivers/media/platform/verisilicon/hantro.h

384

pr_err("%s:%d: " fmt, __func__, __LINE__, ##args)

drivers/media/radio/radio-cadet.c

293

pr_err("cadet: RDS fifo overflow\n");

drivers/media/rc/imon.c

2215

pr_err("no valid input (IR) endpoint found\n");

drivers/media/rc/imon.c

2284

pr_err("usb_submit_urb failed for intf0 (%d)\n", ret);

drivers/media/rc/imon.c

2366

pr_err("usb_submit_urb failed for intf1 (%d)\n", ret);

drivers/media/rc/imon.c

2453

pr_err("failed to initialize context!\n");

drivers/media/rc/imon.c

2471

pr_err("failed to attach to context!\n");

drivers/media/rc/imon.c

2486

pr_err("Could not create RF sysfs entries(%d)\n",

drivers/media/rc/imon.c

517

pr_err("could not find interface for minor %d\n", subminor);

drivers/media/rc/imon.c

526

pr_err("no context found for minor %d\n", subminor);

drivers/media/rc/imon.c

537

pr_err("display not supported by device\n");

drivers/media/rc/imon.c

540

pr_err("display port is already open\n");

drivers/media/rc/imon.c

569

pr_err("display not supported by device\n");

drivers/media/rc/imon.c

572

pr_err("display is not open\n");

drivers/media/rc/imon.c

695

pr_err("no context for device\n");

drivers/media/rc/imon.c

700

pr_err("no iMON device present\n");

drivers/media/rc/imon.c

727

pr_err("no context for device\n");

drivers/media/rc/imon.c

788

pr_err("send_packet failed for packet %d\n", i);

drivers/media/rc/lirc_dev.c

801

pr_err("alloc_chrdev_region failed\n");

drivers/media/rc/rc-main.c

116

pr_err("Couldn't load IR keymap %s\n", name);

drivers/media/rc/rc-main.c

1236

pr_err("Can't enable IR protocol %s\n",

drivers/media/rc/rc-main.c

1244

pr_err("Couldn't load IR protocol module %s\n",

drivers/media/rc/rc-main.c

125

pr_err("IR keymap %s not found\n", name);

drivers/media/rc/rc-main.c

1254

pr_err("Loaded IR protocol module %s, but protocol %s still not available\n",

drivers/media/rc/rc-main.c

2060

pr_err("rc_core: unable to register rc class\n");

drivers/media/rc/rc-main.c

2066

pr_err("rc_core: unable to init lirc\n");

drivers/media/rc/serial_ir.c

418

pr_err("port existence test failed, cannot continue\n");

drivers/media/rc/winbond-cir.c

1204

pr_err("Unable to register driver\n");

drivers/media/rc/xbox_remote.c

200

pr_err("%s: Unexpected desc.bNumEndpoints: %d\n",

drivers/media/rc/xbox_remote.c

208

pr_err("%s: Unexpected endpoint_in\n", __func__);

drivers/media/rc/xbox_remote.c

212

pr_err("%s: endpoint_in message size==0?\n", __func__);

drivers/media/spi/cxd2880-spi.c

112

pr_err("write spi failed %d\n", ret);

drivers/media/spi/cxd2880-spi.c

127

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

131

pr_err("packet num > 0xffff\n");

drivers/media/spi/cxd2880-spi.c

150

pr_err("spi_sync failed\n");

drivers/media/spi/cxd2880-spi.c

163

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

170

pr_err("spi_write_then_read failed\n");

drivers/media/spi/cxd2880-spi.c

190

pr_err("write spi failed\n");

drivers/media/spi/cxd2880-spi.c

204

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

241

pr_err("invalid arg.\n");

drivers/media/spi/cxd2880-spi.c

261

pr_err("set_pid_filter failed\n");

drivers/media/spi/cxd2880-spi.c

276

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

282

pr_err("set_clear_ts_buffer failed\n");

drivers/media/spi/cxd2880-spi.c

291

pr_err("spi_read_ts_buffer_info error\n");

drivers/media/spi/cxd2880-spi.c

330

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

336

pr_err("feed->demux is NULL\n");

drivers/media/spi/cxd2880-spi.c

342

pr_err("Exceeded maximum PID count (32).");

drivers/media/spi/cxd2880-spi.c

343

pr_err("Selected PID cannot be enabled.\n");

drivers/media/spi/cxd2880-spi.c

353

pr_err("update pid filter failed\n");

drivers/media/spi/cxd2880-spi.c

376

pr_err("PID filter is full.\n");

drivers/media/spi/cxd2880-spi.c

394

pr_err("ts buffer allocate failed\n");

drivers/media/spi/cxd2880-spi.c

404

pr_err("kthread_run failed\n");

drivers/media/spi/cxd2880-spi.c

428

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

434

pr_err("feed->demux is NULL\n");

drivers/media/spi/cxd2880-spi.c

440

pr_err("no feed is started\n");

drivers/media/spi/cxd2880-spi.c

451

pr_err("PID %d not found\n", feed->pid);

drivers/media/spi/cxd2880-spi.c

473

pr_err("PID %d not found\n", feed->pid);

drivers/media/spi/cxd2880-spi.c

488

pr_err("kthread_stop failed. (%d)\n", ret_stop);

drivers/media/spi/cxd2880-spi.c

515

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

548

pr_err("dvb_register_adapter() failed\n");

drivers/media/spi/cxd2880-spi.c

553

pr_err("cxd2880_attach failed\n");

drivers/media/spi/cxd2880-spi.c

561

pr_err("dvb_register_frontend() failed\n");

drivers/media/spi/cxd2880-spi.c

574

pr_err("dvb_dmx_init() failed\n");

drivers/media/spi/cxd2880-spi.c

584

pr_err("dvb_dmxdev_init() failed\n");

drivers/media/spi/cxd2880-spi.c

592

pr_err("add_frontend() failed\n");

drivers/media/spi/cxd2880-spi.c

599

pr_err("connect_frontend() failed\n");

drivers/media/spi/cxd2880-spi.c

68

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

89

pr_err("invalid arg\n");

drivers/media/spi/cxd2880-spi.c

93

pr_err("data size > WRITE_MAX\n");

drivers/media/spi/cxd2880-spi.c

98

pr_err("out of range\n");

drivers/media/test-drivers/vicodec/codec-v4l2-fwht.c

303

pr_err("version %d is not supported, current version is %d\n",

drivers/media/test-drivers/vicodec/vicodec-core.c

1978

pr_err("No buffer was provided with the request\n");

drivers/media/test-drivers/vivid/vivid-core.c

2086

pr_err("vivid: could not find font\n");

drivers/media/test-drivers/vivid/vivid-core.c

2105

pr_err("vivid: error %d while loading driver\n", ret);

drivers/media/test-drivers/vivid/vivid-osd.c

330

pr_err("abort, unable to alloc cmap\n");

drivers/media/tuners/xc5000.c

1116

pr_err("xc5000: Upload failed. rc %d\n", ret);

drivers/media/tuners/xc5000.c

1122

pr_err("xc5000: Firmware file with incorrect size\n");

drivers/media/usb/as102/as102_fw.c

182

pr_err("%s: unable to locate firmware file: %s\n",

drivers/media/usb/as102/as102_fw.c

190

pr_err("%s: error during firmware upload part1\n",

drivers/media/usb/as102/as102_fw.c

206

pr_err("%s: unable to locate firmware file: %s\n",

drivers/media/usb/as102/as102_fw.c

214

pr_err("%s: error during firmware upload part2\n",

drivers/media/usb/as102/as102_fw.c

48

pr_err("invalid firmware file\n");

drivers/media/usb/as102/as102_usb_drv.c

344

pr_err("Device names table invalid size");

drivers/media/usb/as102/as102_usb_drv.c

426

pr_err("%s: can't find device for minor %d\n",

drivers/media/usb/au0828/au0828-cards.c

133

pr_err("%s(): Unknown command.\n", __func__);

drivers/media/usb/au0828/au0828-cards.c

216

pr_err("analog subdev registration failed\n");

drivers/media/usb/au0828/au0828-cards.c

225

pr_err("tuner subdev registration fail\n");

drivers/media/usb/au0828/au0828-core.c

108

pr_err("%s() Failed receiving control message, error %d.\n",

drivers/media/usb/au0828/au0828-core.c

408

pr_err("Activate link from %s->%s. Error %d\n",

drivers/media/usb/au0828/au0828-core.c

415

pr_err("Start Pipeline: %s->%s Error %d\n",

drivers/media/usb/au0828/au0828-core.c

419

pr_err("Deactivate link Error %d\n", ret);

drivers/media/usb/au0828/au0828-core.c

512

pr_err("Start Pipeline: %s->%s %d\n",

drivers/media/usb/au0828/au0828-core.c

542

pr_err("Deactivate link Error %d\n", ret);

drivers/media/usb/au0828/au0828-core.c

668

pr_err("au0828: Device initialization failed.\n");

drivers/media/usb/au0828/au0828-core.c

669

pr_err("au0828: Device must be connected to a high-speed USB 2.0 port.\n");

drivers/media/usb/au0828/au0828-core.c

675

pr_err("%s() Unable to allocate memory\n", __func__);

drivers/media/usb/au0828/au0828-core.c

690

pr_err("%s() au0828_media_device_init failed\n",

drivers/media/usb/au0828/au0828-core.c

726

pr_err("%s() au0828_analog_register failed to register on V4L2\n",

drivers/media/usb/au0828/au0828-core.c

735

pr_err("%s() au0828_dvb_register failed\n",

drivers/media/usb/au0828/au0828-core.c

83

pr_err("%s() Failed sending control message, error %d.\n",

drivers/media/usb/au0828/au0828-core.c

832

pr_err("usb_register failed, error = %d\n", ret);

drivers/media/usb/au0828/au0828-dvb.c

127

pr_err("%s: Unsupported URB type %d\n",

drivers/media/usb/au0828/au0828-dvb.c

218

pr_err("%s: failed big buffer allocation, err = %d\n",

drivers/media/usb/au0828/au0828-dvb.c

239

pr_err("%s: failed urb submission, err = %d\n",

drivers/media/usb/au0828/au0828-dvb.c

410

pr_err("failed buffer allocation (errno = %d)\n",

drivers/media/usb/au0828/au0828-dvb.c

424

pr_err("dvb_register_adapter failed (errno = %d)\n",

drivers/media/usb/au0828/au0828-dvb.c

438

pr_err("dvb_register_frontend failed (errno = %d)\n",

drivers/media/usb/au0828/au0828-dvb.c

458

pr_err("dvb_dmx_init failed (errno = %d)\n", result);

drivers/media/usb/au0828/au0828-dvb.c

467

pr_err("dvb_dmxdev_init failed (errno = %d)\n", result);

drivers/media/usb/au0828/au0828-dvb.c

474

pr_err("add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",

drivers/media/usb/au0828/au0828-dvb.c

482

pr_err("add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",

drivers/media/usb/au0828/au0828-dvb.c

489

pr_err("connect_frontend failed (errno = %d)\n", result);

drivers/media/usb/au0828/au0828-dvb.c

625

pr_err("%s() Frontend initialization failed\n",

drivers/media/usb/au0828/au0828-vbi.c

43

pr_err("%s data will not fit into plane (%lu < %lu)\n",

drivers/media/usb/au0828/au0828-video.c

1851

pr_err("failed to initialize video media entity!\n");

drivers/media/usb/au0828/au0828-video.c

1856

pr_err("failed to initialize vbi media entity!\n");

drivers/media/usb/au0828/au0828-video.c

1886

pr_err("failed to initialize input pad[%d]!\n", i);

drivers/media/usb/au0828/au0828-video.c

1890

pr_err("failed to register input entity %d!\n", i);

drivers/media/usb/au0828/au0828-video.c

2024

pr_err("%s() au0282_dev_register failed to create graph\n",

drivers/media/usb/au0828/au0828-video.c

660

pr_err("%s() v4l2_device_register failed\n",

drivers/media/usb/au0828/au0828-video.c

670

pr_err("%s() v4l2_ctrl_handler_init failed\n",

drivers/media/usb/au0828/au0828-video.c

704

pr_err("%s data will not fit into plane (%lu < %lu)\n",

drivers/media/usb/cx231xx/cx231xx-video.c

1006

pr_err("failed to initialize input pad[%d]!\n", i);

drivers/media/usb/cx231xx/cx231xx-video.c

1010

pr_err("failed to register input entity %d!\n", i);

drivers/media/usb/dvb-usb-v2/az6007.c

154

pr_err("az6007: tried to write %d bytes, but I2C max size is 64 bytes\n",

drivers/media/usb/dvb-usb-v2/az6007.c

165

pr_err("usb write operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

602

pr_err("Cannot initialize CI: Error %d.\n", ret);

drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c

101

pr_err("%s: invalid bandwidth setting!", __func__);

drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c

292

pr_err("%s: bandwidth not set!", __func__);

drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.c

297

pr_err("%s: modulation type not supported!", __func__);

drivers/media/usb/dvb-usb-v2/mxl111sf.c

106

pr_err("invalid response reading reg: 0x%02x != 0x%02x, 0x%02x",

drivers/media/usb/dvb-usb-v2/mxl111sf.c

125

pr_err("error writing reg: 0x%02x, val: 0x%02x", addr, data);

drivers/media/usb/dvb-usb-v2/mxl111sf.c

142

pr_err("error writing addr: 0x%02x, mask: 0x%02x, data: 0x%02x, retrying...",

drivers/media/usb/dvb-usb-v2/mxl111sf.c

175

pr_err("failed on reg #%d (0x%02x)", i,

drivers/media/usb/dvb-usb-v2/mxl111sf.c

247

pr_err("failed to get chip info during probe"); \

drivers/media/usb/dvb-usb-v2/mxl111sf.c

285

pr_err("set interface failed");

drivers/media/usb/dvb-usb-v2/mxl111sf.c

440

pr_err("set interface failed");

drivers/media/usb/dvb-usb-v2/mxl111sf.c

511

pr_err("set interface failed");

drivers/media/usb/dvb-usb-v2/mxl111sf.c

596

pr_err("set interface failed");

drivers/media/usb/dvb-usb-v2/mxl111sf.c

683

pr_err("set interface failed");

drivers/media/usb/dvb-usb-v2/mxl111sf.c

758

pr_err("set interface failed");

drivers/media/usb/dvb-usb-v2/mxl111sf.c

810

pr_err("%s(%d) FINAL input set to %s rxPwr:%d|%d|%d|%d\n", \

drivers/media/usb/dvb-usb-v2/mxl111sf.c

936

pr_err("failed to get chip info during probe");

drivers/media/usb/em28xx/em28xx-audio.c

223

pr_err("em28xx-audio: BUG: em28xx can't find device struct. Can't proceed with open\n");

drivers/media/usb/gspca/benq.c

156

pr_err("urb status: %d\n", urb->status);

drivers/media/usb/gspca/benq.c

184

pr_err("ISOC data error: [%d] status=%d\n",

drivers/media/usb/gspca/benq.c

231

pr_err("usb_submit_urb(0) ret %d\n", st);

drivers/media/usb/gspca/benq.c

234

pr_err("usb_submit_urb() ret %d\n", st);

drivers/media/usb/gspca/benq.c

50

pr_err("reg_w err %d\n", ret);

drivers/media/usb/gspca/benq.c

94

pr_err("usb_alloc_coherent failed\n");

drivers/media/usb/gspca/conex.c

909

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/cpia1.c

1156

pr_err("ReadVPRegs(30,4,9,8) - failed: %d\n", ret);

drivers/media/usb/gspca/cpia1.c

1849

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/cpia1.c

428

pr_err("usb_control_msg %02x, error %d\n", command[1], ret);

drivers/media/usb/gspca/dtcs033.c

44

pr_err("usb_control_msg error %d\n", ret);

drivers/media/usb/gspca/etoms.c

191

pr_err("reg_w: buffer overflow\n");

drivers/media/usb/gspca/etoms.c

735

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/finepix.c

189

pr_err("init failed %d\n", ret);

drivers/media/usb/gspca/finepix.c

201

pr_err("usb_bulk_msg failed %d\n", ret);

drivers/media/usb/gspca/finepix.c

208

pr_err("frame request failed %d\n", ret);

drivers/media/usb/gspca/gl860/gl860.c

164

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/gl860/gl860.c

570

pr_err("ctrl transfer failed %4d [p%02x r%d v%04x i%04x len%d]\n",

drivers/media/usb/gspca/gspca.c

113

pr_err("Resubmit URB failed with error %i\n", ret);

drivers/media/usb/gspca/gspca.c

142

pr_err("Input device registration failed with error %i\n",

drivers/media/usb/gspca/gspca.c

1461

pr_err("couldn't kzalloc gspca struct\n");

drivers/media/usb/gspca/gspca.c

1466

pr_err("out of memory\n");

drivers/media/usb/gspca/gspca.c

1561

pr_err("video_register_device err %d\n", ret);

drivers/media/usb/gspca/gspca.c

1598

pr_err("%04x:%04x too many config\n",

drivers/media/usb/gspca/gspca.c

313

pr_err("usb_submit_urb() ret %d\n", st);

drivers/media/usb/gspca/gspca.c

369

pr_err("usb_submit_urb() ret %d\n", st);

drivers/media/usb/gspca/gspca.c

502

pr_err("set alt 0 err %d\n", ret);

drivers/media/usb/gspca/gspca.c

602

pr_err("alt %d iso endp with 0 interval\n", j);

drivers/media/usb/gspca/gspca.c

708

pr_err("usb_alloc_coherent failed\n");

drivers/media/usb/gspca/gspca.c

788

pr_err("bad altsetting %d\n", gspca_dev->alt);

drivers/media/usb/gspca/gspca.c

798

pr_err("no transfer endpoint found\n");

drivers/media/usb/gspca/gspca.c

819

pr_err("set alt %d err %d\n", alt, ret);

drivers/media/usb/gspca/gspca.c

870

pr_err("usb_submit_urb alt %d err %d\n",

drivers/media/usb/gspca/gspca.c

887

pr_err("no transfer endpoint found\n");

drivers/media/usb/gspca/jeilinj.c

115

pr_err("read command [%02x] error %d\n",

drivers/media/usb/gspca/jeilinj.c

459

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/jeilinj.c

97

pr_err("command write [%02x] error %d\n",

drivers/media/usb/gspca/jl2005bcd.c

319

pr_err("Couldn't allocate USB buffer\n");

drivers/media/usb/gspca/jl2005bcd.c

346

pr_err("First block is not the first block\n");

drivers/media/usb/gspca/jl2005bcd.c

464

pr_err("Unknown resolution specified\n");

drivers/media/usb/gspca/jl2005bcd.c

83

pr_err("command write [%02x] error %d\n",

drivers/media/usb/gspca/jl2005bcd.c

97

pr_err("read command [0x%02x] error %d\n",

drivers/media/usb/gspca/kinect.c

132

pr_err("send_cmd: Invalid command length (0x%x)\n", cmd_len);

drivers/media/usb/gspca/kinect.c

149

pr_err("send_cmd: Output control transfer failed (%d)\n", res);

drivers/media/usb/gspca/kinect.c

158

pr_err("send_cmd: Input control transfer failed (%d)\n",

drivers/media/usb/gspca/kinect.c

165

pr_err("send_cmd: Bad magic %02x %02x\n",

drivers/media/usb/gspca/kinect.c

170

pr_err("send_cmd: Bad cmd %02x != %02x\n",

drivers/media/usb/gspca/kinect.c

175

pr_err("send_cmd: Bad tag %04x != %04x\n",

drivers/media/usb/gspca/kinect.c

180

pr_err("send_cmd: Bad len %04x != %04x\n",

drivers/media/usb/gspca/konica.c

115

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/konica.c

179

pr_err("Couldn't get altsetting\n");

drivers/media/usb/gspca/konica.c

214

pr_err("usb_buffer_alloc failed\n");

drivers/media/usb/gspca/konica.c

276

pr_err("resubmit urb error %d\n", st);

drivers/media/usb/gspca/konica.c

432

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/konica.c

93

pr_err("reg_w err writing %02x to %02x: %d\n",

drivers/media/usb/gspca/m5602/m5602_mt9m111.c

300

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/m5602/m5602_ov7660.c

296

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/m5602/m5602_ov9650.c

398

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/m5602/m5602_po1030.c

269

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/m5602/m5602_s5k4aa.c

444

pr_err("Invalid stream command, exiting init\n");

drivers/media/usb/gspca/m5602/m5602_s5k4aa.c

477

pr_err("Invalid stream command, exiting init\n");

drivers/media/usb/gspca/m5602/m5602_s5k4aa.c

552

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/m5602/m5602_s5k83a.c

284

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/mars.c

212

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/mars.c

83

pr_err("reg write [%02x] error %d\n",

drivers/media/usb/gspca/mr97310a.c

131

pr_err("reg write [%02x] error %d\n",

drivers/media/usb/gspca/mr97310a.c

145

pr_err("reg read [%02x] error %d\n",

drivers/media/usb/gspca/mr97310a.c

403

pr_err("Unknown CIF Sensor id : %02x\n",

drivers/media/usb/gspca/mr97310a.c

438

pr_err("Unknown VGA Sensor id Byte 0: %02x\n",

drivers/media/usb/gspca/mr97310a.c

440

pr_err("Defaults assumed, may not work\n");

drivers/media/usb/gspca/mr97310a.c

441

pr_err("Please report this\n");

drivers/media/usb/gspca/mr97310a.c

458

pr_err("Unknown VGA Sensor id Byte 1: %02x\n",

drivers/media/usb/gspca/mr97310a.c

460

pr_err("Defaults assumed, may not work\n");

drivers/media/usb/gspca/mr97310a.c

461

pr_err("Please report this\n");

drivers/media/usb/gspca/mr97310a.c

997

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/nw80x.c

1552

pr_err("reg_w err %d\n", ret);

drivers/media/usb/gspca/nw80x.c

1573

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/nw80x.c

1780

pr_err("Bad webcam type %d for NW80%d\n",

drivers/media/usb/gspca/nw80x.c

2034

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/ov534.c

1299

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/ov534.c

674

pr_err("write failed %d\n", ret);

drivers/media/usb/gspca/ov534.c

694

pr_err("read failed %d\n", ret);

drivers/media/usb/gspca/ov534.c

764

pr_err("sccb_reg_write failed\n");

drivers/media/usb/gspca/ov534.c

774

pr_err("sccb_reg_read failed 1\n");

drivers/media/usb/gspca/ov534.c

778

pr_err("sccb_reg_read failed 2\n");

drivers/media/usb/gspca/ov534_9.c

1120

pr_err("reg_w failed %d\n", ret);

drivers/media/usb/gspca/ov534_9.c

1146

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/ov534_9.c

1186

pr_err("sccb_write failed\n");

drivers/media/usb/gspca/ov534_9.c

1194

pr_err("sccb_read failed 1\n");

drivers/media/usb/gspca/ov534_9.c

1198

pr_err("sccb_read failed 2\n");

drivers/media/usb/gspca/ov534_9.c

1490

pr_err("Unknown sensor %04x", sensor_id);

drivers/media/usb/gspca/ov534_9.c

1775

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/pac207.c

102

pr_err("Failed to write registers to index 0x%04X, error %d\n",

drivers/media/usb/gspca/pac207.c

120

pr_err("Failed to write a register (index 0x%04X, value 0x%02X, error %d)\n",

drivers/media/usb/gspca/pac207.c

139

pr_err("Failed to read a register (index 0x%04X, error %d)\n",

drivers/media/usb/gspca/pac207.c

268

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/pac7302.c

249

pr_err("reg_w_buf failed i: %02x error %d\n",

drivers/media/usb/gspca/pac7302.c

272

pr_err("reg_w() failed i: %02x v: %02x error %d\n",

drivers/media/usb/gspca/pac7302.c

307

pr_err("reg_w_page() failed i: %02x v: %02x error %d\n",

drivers/media/usb/gspca/pac7302.c

678

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/pac7311.c

168

pr_err("reg_w_buf() failed index 0x%02x, error %d\n",

drivers/media/usb/gspca/pac7311.c

191

pr_err("reg_w() failed index 0x%02x, value 0x%02x, error %d\n",

drivers/media/usb/gspca/pac7311.c

226

pr_err("reg_w_page() failed index 0x%02x, value 0x%02x, error %d\n",

drivers/media/usb/gspca/pac7311.c

423

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/se401.c

101

pr_err("read req failed req %#04x error %d\n",

drivers/media/usb/gspca/se401.c

126

pr_err("set feature failed sel %#04x param %#04x error %d\n",

drivers/media/usb/gspca/se401.c

140

pr_err("USB_BUF_SZ too small!!\n");

drivers/media/usb/gspca/se401.c

151

pr_err("get feature failed sel %#04x error %d\n",

drivers/media/usb/gspca/se401.c

232

pr_err("Wrong descriptor type\n");

drivers/media/usb/gspca/se401.c

237

pr_err("Bayer format not supported!\n");

drivers/media/usb/gspca/se401.c

246

pr_err("Too many frame sizes\n");

drivers/media/usb/gspca/se401.c

505

pr_err("invalid packet len %d restarting stream\n",

drivers/media/usb/gspca/se401.c

510

pr_err("unknown frame info value restarting stream\n");

drivers/media/usb/gspca/se401.c

534

pr_err("frame size %d expected %d\n",

drivers/media/usb/gspca/se401.c

664

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/se401.c

76

pr_err("write req failed req %#04x val %#04x error %d\n",

drivers/media/usb/gspca/se401.c

90

pr_err("USB_BUF_SZ too small!!\n");

drivers/media/usb/gspca/sn9c2028.c

109

pr_err("read4 error %d\n", rc);

drivers/media/usb/gspca/sn9c2028.c

131

pr_err("long command status read error %d\n", status);

drivers/media/usb/gspca/sn9c2028.c

74

pr_err("command write [%02x] error %d\n",

drivers/media/usb/gspca/sn9c2028.c

829

pr_err("Starting unknown camera, please report this\n");

drivers/media/usb/gspca/sn9c2028.c

92

pr_err("read1 error %d\n", rc);

drivers/media/usb/gspca/sn9c20x.c

1092

pr_err("sensor id for ov9650 doesn't match (0x%04x)\n", id);

drivers/media/usb/gspca/sn9c20x.c

1101

pr_err("OV9650 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1114

pr_err("OV9655 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1128

pr_err("SOI968 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1142

pr_err("OV7660 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1155

pr_err("OV7670 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1172

pr_err("MT9V011 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1190

pr_err("MT9V111 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1213

pr_err("MT9V112 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1232

pr_err("MT9M112 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1244

pr_err("MT9M111 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1269

pr_err("No MT9M001 chip detected, ID = %x\n\n", id);

drivers/media/usb/gspca/sn9c20x.c

1276

pr_err("MT9M001 sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1288

pr_err("HV7131R Sensor initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1779

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/sn9c20x.c

1813

pr_err("Device initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1825

pr_err("Device initialization failed\n");

drivers/media/usb/gspca/sn9c20x.c

1890

pr_err("Unsupported sensor\n");

drivers/media/usb/gspca/sn9c20x.c

920

pr_err("Read register %02x failed %d\n", reg, result);

drivers/media/usb/gspca/sn9c20x.c

948

pr_err("Write register %02x failed %d\n", reg, result);

drivers/media/usb/gspca/sn9c20x.c

969

pr_err("i2c_w error\n");

drivers/media/usb/gspca/sn9c20x.c

976

pr_err("i2c_w reg %02x no response\n", buffer[2]);

drivers/media/usb/gspca/sonixb.c

1077

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/sonixj.c

1163

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/sonixj.c

1192

pr_err("reg_w1 err %d\n", ret);

drivers/media/usb/gspca/sonixj.c

1222

pr_err("reg_w err %d\n", ret);

drivers/media/usb/gspca/sonixj.c

1263

pr_err("i2c_w1 err %d\n", ret);

drivers/media/usb/gspca/sonixj.c

1288

pr_err("i2c_w8 err %d\n", ret);

drivers/media/usb/gspca/sonixj.c

1472

pr_err("Unknown sensor %04x\n", val);

drivers/media/usb/gspca/sonixj.c

1510

pr_err("Unknown sensor ID %04x\n", val);

drivers/media/usb/gspca/sonixj.c

1680

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/spca1528.c

124

pr_err("reg_w err %d\n", ret);

drivers/media/usb/gspca/spca1528.c

389

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/spca1528.c

72

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/spca1528.c

99

pr_err("reg_w err %d\n", ret);

drivers/media/usb/gspca/spca500.c

329

pr_err("reg write: error %d\n", ret);

drivers/media/usb/gspca/spca500.c

351

pr_err("reg_r_12 err %d\n", ret);

drivers/media/usb/gspca/spca500.c

921

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/spca501.c

1759

pr_err("reg write: error %d\n", ret);

drivers/media/usb/gspca/spca501.c

1985

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/spca505.c

547

pr_err("reg write: error %d\n", ret);

drivers/media/usb/gspca/spca505.c

647

pr_err("After vector read returns 0x%04x should be 0x0101\n",

drivers/media/usb/gspca/spca505.c

744

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/spca506.c

553

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/spca508.c

1244

pr_err("reg write: error %d\n", ret);

drivers/media/usb/gspca/spca508.c

1266

pr_err("reg_read err %d\n", ret);

drivers/media/usb/gspca/spca508.c

1477

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/spca561.c

287

pr_err("reg write: error %d\n", ret);

drivers/media/usb/gspca/spca561.c

805

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/spca561.c

828

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/sq905.c

114

pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);

drivers/media/usb/gspca/sq905.c

125

pr_err("%s: usb_control_msg failed 2 (%d)\n", __func__, ret);

drivers/media/usb/gspca/sq905.c

147

pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);

drivers/media/usb/gspca/sq905.c

175

pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);

drivers/media/usb/gspca/sq905.c

184

pr_err("bulk read fail (%d) len %d/%d\n", ret, act_len, size);

drivers/media/usb/gspca/sq905.c

213

pr_err("Couldn't allocate USB buffer\n");

drivers/media/usb/gspca/sq905c.c

106

pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);

drivers/media/usb/gspca/sq905c.c

134

pr_err("Couldn't allocate USB buffer\n");

drivers/media/usb/gspca/sq905c.c

87

pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);

drivers/media/usb/gspca/sq930x.c

1045

pr_err("sd_dq_callback() err %d\n", ret);

drivers/media/usb/gspca/sq930x.c

1100

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/sq930x.c

426

pr_err("reg_r %04x failed %d\n", value, ret);

drivers/media/usb/gspca/sq930x.c

451

pr_err("reg_w %04x %04x failed %d\n", value, index, ret);

drivers/media/usb/gspca/sq930x.c

474

pr_err("reg_wb %04x %04x failed %d\n", value, index, ret);

drivers/media/usb/gspca/sq930x.c

519

pr_err("i2c_write failed %d\n", ret);

drivers/media/usb/gspca/sq930x.c

573

pr_err("ucbus_write failed %d\n", ret);

drivers/media/usb/gspca/sq930x.c

649

pr_err("Unknown sensor\n");

drivers/media/usb/gspca/sq930x.c

657

pr_err("Sensor %s not yet treated\n",

drivers/media/usb/gspca/stk014.c

112

pr_err("rcv_val err %d\n", ret);

drivers/media/usb/gspca/stk014.c

155

pr_err("snd_val err %d\n", ret);

drivers/media/usb/gspca/stk014.c

226

pr_err("init reg: 0x%02x\n", ret);

drivers/media/usb/gspca/stk014.c

261

pr_err("set intf %d %d failed\n",

drivers/media/usb/gspca/stk014.c

390

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/stk014.c

57

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/stk014.c

82

pr_err("reg_w err %d\n", ret);

drivers/media/usb/gspca/stk1135.c

118

pr_err("serial bus timeout: status=0x%02x\n", val);

drivers/media/usb/gspca/stk1135.c

134

pr_err("Sensor read failed\n");

drivers/media/usb/gspca/stk1135.c

156

pr_err("Sensor write failed\n");

drivers/media/usb/gspca/stk1135.c

600

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/stk1135.c

64

pr_err("reg_r 0x%x err %d\n", index, ret);

drivers/media/usb/gspca/stk1135.c

90

pr_err("reg_w 0x%x err %d\n", index, ret);

drivers/media/usb/gspca/stv0680.c

223

pr_err("Could not get descriptor 0100\n");

drivers/media/usb/gspca/stv0680.c

66

pr_err("usb_control_msg error %i, request = 0x%x, error = %i\n",

drivers/media/usb/gspca/stv06xx/stv06xx.c

189

pr_err("I2C: Read error writing address: %d\n", err);

drivers/media/usb/gspca/sunplus.c

260

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/sunplus.c

290

pr_err("reg_w_1 err %d\n", ret);

drivers/media/usb/gspca/sunplus.c

310

pr_err("reg_w_riv err %d\n", ret);

drivers/media/usb/gspca/sunplus.c

967

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/t613.c

333

pr_err("Out of memory\n");

drivers/media/usb/gspca/t613.c

359

pr_err("Out of memory\n");

drivers/media/usb/gspca/t613.c

413

pr_err("Bad sensor reset %02x\n", byte);

drivers/media/usb/gspca/t613.c

602

pr_err("unknown sensor %04x\n", sensor_id);

drivers/media/usb/gspca/t613.c

617

pr_err("Bad sensor reset %02x\n", test_byte);

drivers/media/usb/gspca/t613.c

991

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/topro.c

1005

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/topro.c

1089

pr_err("bulk write error %d tag=%02x\n",

drivers/media/usb/gspca/topro.c

4712

pr_err("bulk err %d\n", ret);

drivers/media/usb/gspca/topro.c

4728

pr_err("bulk err %d\n", ret);

drivers/media/usb/gspca/topro.c

4915

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/topro.c

987

pr_err("reg_w err %d\n", ret);

drivers/media/usb/gspca/tv8532.c

316

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/vc032x.c

2907

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/vc032x.c

2949

pr_err("reg_w err %d\n", ret);

drivers/media/usb/gspca/vc032x.c

2972

pr_err("I2c Bus Busy Wait %02x\n", gspca_dev->usb_buf[0]);

drivers/media/usb/gspca/vc032x.c

3084

pr_err("i2c_write timeout\n");

drivers/media/usb/gspca/vc032x.c

3169

pr_err("Unknown sensor...\n");

drivers/media/usb/gspca/vc032x.c

3776

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/vicam.c

152

pr_err("bulk read fail (%d) len %d/%d\n",

drivers/media/usb/gspca/vicam.c

178

pr_err("Couldn't allocate USB buffer\n");

drivers/media/usb/gspca/vicam.c

235

pr_err("Failed to load \"vicam/firmware.fw\": %d\n", ret);

drivers/media/usb/gspca/vicam.c

306

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/vicam.c

79

pr_err("control msg req %02X error %d\n", request, ret);

drivers/media/usb/gspca/w996Xcf.c

103

pr_err("Write SB reg [01] %04x failed\n", value);

drivers/media/usb/gspca/w996Xcf.c

133

pr_err("Read SB reg [01] failed\n");

drivers/media/usb/gspca/w996Xcf.c

73

pr_err("Write FSB registers failed (%d)\n", ret);

drivers/media/usb/gspca/xirlink_cit.c

1441

pr_err("Couldn't get altsetting\n");

drivers/media/usb/gspca/xirlink_cit.c

2696

pr_err("set alt 1 err %d\n", ret);

drivers/media/usb/gspca/xirlink_cit.c

3055

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/xirlink_cit.c

675

pr_err("Failed to write a register (index 0x%04X, value 0x%02X, error %d)\n",

drivers/media/usb/gspca/xirlink_cit.c

691

pr_err("Failed to read a register (index 0x%04X, error %d)\n",

drivers/media/usb/gspca/zc3xx.c

5544

pr_err("reg_r err %d\n", ret);

drivers/media/usb/gspca/zc3xx.c

5566

pr_err("reg_w_i err %d\n", ret);

drivers/media/usb/gspca/zc3xx.c

5584

pr_err("i2c_r status error %02x\n", retbyte);

drivers/media/usb/gspca/zc3xx.c

5606

pr_err("i2c_w status error %02x\n", retbyte);

drivers/media/usb/gspca/zc3xx.c

6470

pr_err("Could not initialize controls\n");

drivers/media/usb/gspca/zc3xx.c

6630

pr_err("Unknown sensor %04x\n", sensor);

drivers/media/usb/pvrusb2/pvrusb2-v4l2.c

1196

pr_err(KBUILD_MODNAME ": Failed to set up pvrusb2 v4l dev due to unrecognized config\n");

drivers/media/usb/pvrusb2/pvrusb2-v4l2.c

1222

pr_err(KBUILD_MODNAME

drivers/media/usb/s2255/s2255drv.c

2105

pr_err("s2255: start read pipe failed\n");

drivers/media/usb/s2255/s2255drv.c

477

pr_err("s2255: can't submit urb\n");

drivers/media/usb/s2255/s2255drv.c

632

pr_err("s2255: =======no frame\n");

drivers/media/usb/siano/smsusb.c

114

pr_err("invalid response msglen %d offset %d size %d\n",

drivers/media/usb/siano/smsusb.c

137

pr_err("invalid response msglen %d actual %d\n",

drivers/media/usb/siano/smsusb.c

141

pr_err("error, urb status %d, %d bytes\n",

drivers/media/usb/siano/smsusb.c

157

pr_err("smscore_getbuffer(...) returned NULL\n");

drivers/media/usb/siano/smsusb.c

199

pr_err("smsusb_submit_urb(...) failed\n");

drivers/media/usb/siano/smsusb.c

261

pr_err("invalid firmware id specified %d\n", id);

drivers/media/usb/siano/smsusb.c

291

pr_err("failed to allocate firmware buffer\n");

drivers/media/usb/siano/smsusb.c

310

pr_err("product string not found\n");

drivers/media/usb/siano/smsusb.c

329

pr_err("invalid firmware id specified %d\n", mode);

drivers/media/usb/siano/smsusb.c

437

pr_err("Unspecified sms device type!\n");

drivers/media/usb/siano/smsusb.c

460

pr_err("smscore_register_device(...) failed, rc %d\n", rc);

drivers/media/usb/siano/smsusb.c

479

pr_err("smsusb_start_streaming(...) failed\n");

drivers/media/usb/siano/smsusb.c

487

pr_err("smscore_start_device(...) failed\n");

drivers/media/usb/siano/smsusb.c

529

pr_err("usb_set_interface failed, rc %d\n", rc);

drivers/media/usb/siano/smsusb.c

570

pr_err("Failed to put stellar in warm state. Error: %d\n",

drivers/media/usb/siano/smsusb.c

92

pr_err("error, urb status %d (-ESHUTDOWN), %d bytes\n",

drivers/media/usb/stk1160/stk1160.h

67

pr_err("stk1160: " fmt, ## args)

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

1392

pr_err("dvbc_philips_tdm1316l_pll_set Error 1\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

1401

pr_err("dvbc_philips_tdm1316l_pll_set Error 2\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

1578

pr_err("no frontend driver found for device [%04x:%04x]\n",

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

1583

pr_err("Frontend registration failed!\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

1632

pr_err("ttusb_init_controller: error\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

1677

pr_err("dvb_dmx_init failed (errno = %d)\n", result);

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

1688

pr_err("dvb_dmxdev_init failed (errno = %d)\n",

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

1695

pr_err("dvb_net_init failed!\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

171

pr_err("cmd xter failed, receive error %d\n", err);

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

286

pr_err("failed to request firmware\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

427

pr_err("unknown STC version %c%c%c%c%c, please report!\n",

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

595

pr_err("illegal muxpack type %02x\n", muxpack[0]);

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

605

pr_err("too much work\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

797

pr_err("iso xfer already running!\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

831

pr_err("failed urb submission (%i: err = %i)!\n",

drivers/media/v4l2-core/tuner-core.c

754

pr_err("failed to initialize media entity!\n");

drivers/media/v4l2-core/v4l2-dev.c

1013

pr_err("could not get a free device node number\n");

drivers/media/v4l2-core/v4l2-dev.c

1028

pr_err("could not get a free minor\n");

drivers/media/v4l2-core/v4l2-dev.c

1038

pr_err("video_device not empty!\n");

drivers/media/v4l2-core/v4l2-dev.c

1059

pr_err("%s: cdev_add failed\n", __func__);

drivers/media/v4l2-core/v4l2-dev.c

1079

pr_err("%s: device_register failed\n", __func__);

drivers/media/v4l2-core/v4l2-dev.c

964

pr_err("%s called with unknown type: %d\n",

drivers/media/v4l2-core/v4l2-fwnode.c

746

pr_err("Unknown connector type\n");

drivers/memory/emif.c

1094

pr_err("%s: error getting device data\n", __func__);

drivers/memory/emif.c

422

pr_err("TIMEOUT Overflow - lpmode=%d perf=%d pwr=%d freq=%d\n",

drivers/memory/omap-gpmc.c

1117

pr_err("%s: command not supported\n", __func__);

drivers/memory/omap-gpmc.c

1867

pr_err("%s: invalid width %d!", __func__, p->device_width);

drivers/memory/omap-gpmc.c

1873

pr_err("%s: invalid configuration!\n", __func__);

drivers/memory/omap-gpmc.c

1880

pr_err("%s: invalid multiplex configuration!\n", __func__);

drivers/memory/omap-gpmc.c

1892

pr_err("%s: invalid page/burst-length (%d)\n",

drivers/memory/omap-gpmc.c

1900

pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);

drivers/memory/omap-gpmc.c

1975

pr_err("%s: requested chip-select is disabled\n", __func__);

drivers/memory/omap-gpmc.c

2036

pr_err("%s: Invalid wait-pin (%d)\n", __func__, p->wait_pin);

drivers/memory/omap-gpmc.c

2044

pr_err("%s: Invalid wait-pin-polarity (%d)\n",

drivers/memory/omap-gpmc.c

2326

pr_err("%s: number of chip-selects not defined\n", __func__);

drivers/memory/omap-gpmc.c

2329

pr_err("%s: all chip-selects are disabled\n", __func__);

drivers/memory/omap-gpmc.c

2332

pr_err("%s: number of supported chip-selects cannot be > %d\n",

drivers/memory/omap-gpmc.c

2340

pr_err("%s: number of wait pins not found!\n", __func__);

drivers/memory/omap-gpmc.c

626

pr_err("%s: GPMC CS%d: %s %d ns, %d ticks > %d ticks\n",

drivers/memory/omap-gpmc.c

728

pr_err("%s: waitmonitoringtime %3d ns too large for greatest gpmcfclkdivider.\n",

drivers/memory/omap-gpmc.c

982

pr_err("%s: requested chip-select is disabled\n", __func__);

drivers/memory/tegra/tegra234.c

1089

pr_err("failed to set bandwidth for %u: %d\n",

drivers/memory/tegra/tegra264.c

254

pr_err("failed to set bandwidth for %u: %d\n",

drivers/memstick/core/ms_block.c

1011

pr_err(

drivers/memstick/core/ms_block.c

1017

pr_err(

drivers/memstick/core/ms_block.c

1023

pr_err("BUG: write: lba zone mismatch");

drivers/memstick/core/ms_block.c

1029

pr_err("BUG: write: attempt to write to boot blocks!");

drivers/memstick/core/ms_block.c

1069

pr_err("write failed, trying to erase the pba %d", pba);

drivers/memstick/core/ms_block.c

1089

pr_err("NO free blocks in the zone %d, to use for a write, (media is WORN out) switching to RO mode", zone);

drivers/memstick/core/ms_block.c

1108

pr_err("BUG: can't get a free block");

drivers/memstick/core/ms_block.c

1159

pr_err("block update error after %d tries, switching to r/o mode", try);

drivers/memstick/core/ms_block.c

1246

pr_err("media doesn't contain master page, aborting");

drivers/memstick/core/ms_block.c

1302

pr_err(

drivers/memstick/core/ms_block.c

1407

pr_err("unknown error %d on read of oob of pba %d - aborting",

drivers/memstick/core/ms_block.c

1567

pr_err("read error on sector %d, contents probably damaged", page);

drivers/memstick/core/ms_block.c

162

pr_err("BUG: free block counts don't match the bitmap");

drivers/memstick/core/ms_block.c

173

pr_err(

drivers/memstick/core/ms_block.c

1802

pr_err("Scan of media failed");

drivers/memstick/core/ms_block.c

193

pr_err("BUG: attempt to mark already unused pba %d as unused" , pba);

drivers/memstick/core/ms_block.c

2317

pr_err("failed to register memstick driver (error %d)\n", rc);

drivers/memstick/core/ms_block.c

778

pr_err("Switch to parallel failed");

drivers/memstick/core/ms_block.c

847

pr_err("erase failed, marking pba %d as bad", pba);

drivers/memstick/core/ms_block.c

902

pr_err("BUG: attempt to read beyond the end of the card at pba %d", pba);

drivers/memstick/core/ms_block.c

932

pr_err("uncorrectable error on read of pba %d, page %d",

drivers/memstick/core/ms_block.c

942

pr_err("read of pba %d, page %d failed with error %d",

drivers/memstick/core/ms_block.c

959

pr_err("BUG: attempt to read beyond the end of card at pba %d", pba);

drivers/memstick/core/ms_block.h

279

pr_err(format "\n", ## __VA_ARGS__); \

drivers/mfd/88pm860x-core.c

1263

pr_err("Failed to register 88PM860x I2C driver: %d\n", ret);

drivers/mfd/ab8500-sysctrl.c

124

pr_err("invalid bank\n");

drivers/mfd/ab8500-sysctrl.c

41

pr_err("%s: sysctrl not initialized\n", __func__);

drivers/mfd/altera-sysmgr.c

164

pr_err("regmap init failed\n");

drivers/mfd/cros_ec_dev.c

385

pr_err(CROS_EC_DEV_NAME ": failed to register device class\n");

drivers/mfd/da9052-i2c.c

193

pr_err("DA9052 I2C registration failed %d\n", ret);

drivers/mfd/da9052-spi.c

89

pr_err("Failed to register DA9052 SPI driver, %d\n", ret);

drivers/mfd/da9055-i2c.c

83

pr_err("DA9055 I2C registration failed %d\n", ret);

drivers/mfd/db8500-prcmu.c

1117

pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",

drivers/mfd/db8500-prcmu.c

1211

pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",

drivers/mfd/db8500-prcmu.c

2118

pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",

drivers/mfd/db8500-prcmu.c

2168

pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",

drivers/mfd/db8500-prcmu.c

2615

pr_err("Failed to create irqdomain\n");

drivers/mfd/db8500-prcmu.c

2633

pr_err("no prcmu tcpm mem region provided\n");

drivers/mfd/db8500-prcmu.c

2670

pr_err("%s: ioremap() of prcmu registers failed!\n", __func__);

drivers/mfd/db8500-prcmu.c

3038

pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");

drivers/mfd/db8500-prcmu.c

3049

pr_err("prcmu: Failed to add subdevices\n");

drivers/mfd/db8500-prcmu.c

3060

pr_err("prcmu: Failed to add subdevices\n");

drivers/mfd/db8500-prcmu.c

3068

pr_err("prcmu: Failed to add ab8500 subdevice\n");

drivers/mfd/db8500-prcmu.c

877

pr_err("prcmu: Bad clock divider %d in %s\n",

drivers/mfd/ioc3.c

581

pr_err("%s: No usable DMA configuration, aborting.\n",

drivers/mfd/lochnagar-i2c.c

389

pr_err("Failed to register Lochnagar driver: %d\n", ret);

drivers/mfd/max8907.c

324

pr_err("Failed to register I2C driver: %d\n", ret);

drivers/mfd/max8925-i2c.c

254

pr_err("Failed to register MAX8925 I2C driver: %d\n", ret);

drivers/mfd/menelaus.c

1170

pr_err(DRIVER_NAME ": device not found");

drivers/mfd/menelaus.c

175

pr_err(DRIVER_NAME ": write error");

drivers/mfd/menelaus.c

187

pr_err(DRIVER_NAME ": read error");

drivers/mfd/palmas.c

462

pr_err("%s: Unable to write to DEV_CTRL_DEV_ON: %d\n",

drivers/mfd/qcom-pm8xxx.c

111

pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);

drivers/mfd/qcom-pm8xxx.c

118

pr_err("Failed Configuring IRQ rc=%d\n", rc);

drivers/mfd/qcom-pm8xxx.c

131

pr_err("Failed reading %d block ret=%d", block, ret);

drivers/mfd/qcom-pm8xxx.c

135

pr_err("block bit set in master but no irqs: %d", block);

drivers/mfd/qcom-pm8xxx.c

157

pr_err("Failed to read master %d ret=%d\n", master, ret);

drivers/mfd/qcom-pm8xxx.c

161

pr_err("master bit set in root but no blocks: %d", master);

drivers/mfd/qcom-pm8xxx.c

181

pr_err("Can't read root status ret=%d\n", ret);

drivers/mfd/qcom-pm8xxx.c

205

pr_err("Reading block %d failed ret=%d", block, ret);

drivers/mfd/qcom-pm8xxx.c

240

pr_err("Failed to read master 0 ret=%d\n", ret);

drivers/mfd/qcom-pm8xxx.c

255

pr_err("Failed to read master 1 ret=%d\n", ret);

drivers/mfd/qcom-pm8xxx.c

339

pr_err("Failed Selecting Block %d rc=%d\n", block, rc);

drivers/mfd/qcom-pm8xxx.c

345

pr_err("Failed Reading Status rc=%d\n", rc);

drivers/mfd/qcom-pm8xxx.c

415

pr_err("Failed to mask IRQ:%d rc=%d\n", pmirq, rc);

drivers/mfd/qcom-pm8xxx.c

423

pr_err("Failed to CLEAR IRQ:%d rc=%d\n", pmirq, rc);

drivers/mfd/qcom-pm8xxx.c

442

pr_err("Failed to read/write unmask IRQ:%d rc=%d\n", pmirq, rc);

drivers/mfd/qcom-pm8xxx.c

463

pr_err("Reading Status of IRQ %d failed rc=%d\n", pmirq, rc);

drivers/mfd/qcom-pm8xxx.c

535

pr_err("Failed to read hw rev reg %d:rc=%d\n", REG_HWREV, rc);

drivers/mfd/qcom-pm8xxx.c

543

pr_err("Failed to read hw rev 2 reg %d:rc=%d\n",

drivers/mfd/qcom-pm8xxx.c

90

pr_err("Failed Selecting Block %d rc=%d\n", bp, rc);

drivers/mfd/qcom-pm8xxx.c

96

pr_err("Failed Reading Status rc=%d\n", rc);

drivers/mfd/syscon.c

120

pr_err("regmap init failed\n");

drivers/mfd/syscon.c

93

pr_err("Failed to retrieve valid hwlock: %d\n", ret);

drivers/mfd/twl-core.c

427

pr_err("%s: not initialized\n", DRIVER_NAME);

drivers/mfd/twl-core.c

431

pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);

drivers/mfd/twl-core.c

462

pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n",

drivers/mfd/twl-core.c

490

pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n",

drivers/mfd/twl-core.c

532

pr_err("TWL4030 Unable to unlock IDCODE registers -%d\n", err);

drivers/mfd/twl-core.c

539

pr_err("TWL4030: unable to read IDCODE -%d\n", err);

drivers/mfd/twl-core.c

545

pr_err("TWL4030 Unable to relock IDCODE registers -%d\n", err);

drivers/mfd/twl-core.c

595

pr_err("TWL4030: HFCLK is not configured\n");

drivers/mfd/twl-core.c

669

pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);

drivers/mfd/twl4030-irq.c

343

pr_err("twl4030: err %d initializing %s %s\n",

drivers/mfd/twl4030-irq.c

359

pr_err("twl4030: err %d initializing %s %s\n",

drivers/mfd/twl4030-irq.c

494

pr_err("twl4030: %s, %s --> %d\n", __func__,

drivers/mfd/twl4030-irq.c

514

pr_err("twl4030: %s, %s --> %d\n", __func__,

drivers/mfd/twl4030-irq.c

541

pr_err("twl4030: %s, %s --> %d\n", __func__,

drivers/mfd/twl4030-irq.c

591

pr_err("twl4030: %s SIH, read ISR error %d\n",

drivers/mfd/twl4030-irq.c

605

pr_err("twl4030: %s SIH, invalid ISR bit %d\n",

drivers/mfd/twl4030-irq.c

760

pr_err("twl4030: can't yet clean up IRQs?\n");

drivers/mfd/twl4030-power.c

262

pr_err("TWL4030 wakeup sequence for P3 config error\n");

drivers/mfd/twl4030-power.c

313

pr_err("TWL4030 wakeup sequence for P1 and P2" \

drivers/mfd/twl4030-power.c

326

pr_err("TWL4030 sleep sequence config error\n");

drivers/mfd/twl4030-power.c

368

pr_err("TWL4030 warmreset seq config error\n");

drivers/mfd/twl4030-power.c

381

pr_err("TWL4030 Resource %d does not exist\n",

drivers/mfd/twl4030-power.c

392

pr_err("TWL4030 Resource %d group could not be read\n",

drivers/mfd/twl4030-power.c

403

pr_err("TWL4030 failed to program devgroup\n");

drivers/mfd/twl4030-power.c

412

pr_err("TWL4030 Resource %d type could not be read\n",

drivers/mfd/twl4030-power.c

430

pr_err("TWL4030 failed to program resource type\n");

drivers/mfd/twl4030-power.c

438

pr_err("TWL4030 Resource %d remap could not be read\n",

drivers/mfd/twl4030-power.c

457

pr_err("TWL4030 failed to program remap\n");

drivers/mfd/twl4030-power.c

473

pr_err("TWL4030 scripts too big error\n");

drivers/mfd/twl4030-power.c

519

pr_err("twl4030: unable to unlock PROTECT_KEY\n");

drivers/mfd/twl4030-power.c

526

pr_err("twl4030: unable to unlock PROTECT_KEY\n");

drivers/mfd/twl4030-power.c

558

pr_err("TWL4030 Unable to relock registers\n");

drivers/mfd/twl4030-power.c

650

pr_err("TWL4030 Register access failed: %i\n", err);

drivers/mfd/twl4030-power.c

669

pr_err("TWL4030 Unable to configure start-up\n");

drivers/mfd/twl4030-power.c

674

pr_err("TWL4030 Unable to power off\n");

drivers/mfd/twl4030-power.c

905

pr_err("TWL4030 Unable to unlock registers\n");

drivers/mfd/twl4030-power.c

915

pr_err("TWL4030 failed to load scripts\n");

drivers/mfd/twl4030-power.c

920

pr_err("TWL4030 failed to configure resource\n");

drivers/mfd/twl4030-power.c

937

pr_err("TWL4030 Unable to setup SEQ_OFFSYNC\n");

drivers/mfd/twl4030-power.c

949

pr_err("TWL4030 Unable to relock registers\n");

drivers/mfd/twl6030-irq.c

132

pr_err("twl6030 IRQ wake enable failed\n");

drivers/mfd/twl6030-irq.c

195

pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n",

drivers/mfd/wm831x-i2c.c

107

pr_err("Failed to register wm831x I2C driver: %d\n", ret);

drivers/mfd/wm831x-spi.c

107

pr_err("Failed to register WM831x SPI driver: %d\n", ret);

drivers/mfd/wm8400-core.c

158

pr_err("Failed to register I2C driver: %d\n", ret);

drivers/misc/atmel-ssc.c

48

pr_err("ssc: ssc%d platform device is missing\n", ssc_num);

drivers/misc/eeprom/at24.c

855

pr_err("at24: at24_io_limit must not be 0!\n");

drivers/misc/fastrpc.c

2563

pr_err("fastrpc: failed to register cb driver\n");

drivers/misc/fastrpc.c

2569

pr_err("fastrpc: failed to register rpmsg driver\n");

drivers/misc/genwqe/card_base.c

1370

pr_err("[%s] create class failed\n", __func__);

drivers/misc/genwqe/card_base.c

1378

pr_err("[%s] pci_reg_driver (rc=%d)\n", __func__, rc);

drivers/misc/ibmvmc.c

1227

pr_err("ibmvmc: setup_hmc success but no hmc\n");

drivers/misc/ibmvmc.c

1316

pr_err("ibmvmc: requestvmc: h_request_vmc not supported\n");

drivers/misc/ibmvmc.c

1319

pr_err("ibmvmc: requestvmc: hypervisor denied vmc request\n");

drivers/misc/ibmvmc.c

1322

pr_err("ibmvmc: requestvmc: hypervisor hardware fault\n");

drivers/misc/ibmvmc.c

1325

pr_err("ibmvmc: requestvmc: vmc resource unavailable\n");

drivers/misc/ibmvmc.c

1328

pr_err("ibmvmc: requestvmc: system cannot be vmc managed\n");

drivers/misc/ibmvmc.c

1331

pr_err("ibmvmc: requestvmc: invalid parameter\n");

drivers/misc/ibmvmc.c

2357

pr_err("ibmvmc: misc registration failed\n");

drivers/misc/ibmvmc.c

2386

pr_err("ibmvmc: rc %d from vio_register_driver\n", rc);

drivers/misc/lis3lv02d/lis3lv02d.c

1165

pr_err("unknown sensor type 0x%X\n", lis3->whoami);

drivers/misc/lis3lv02d/lis3lv02d.c

1191

pr_err("joystick initialization failed\n");

drivers/misc/lis3lv02d/lis3lv02d.c

1242

pr_err("Cannot get IRQ\n");

drivers/misc/lis3lv02d/lis3lv02d.c

1251

pr_err("misc_register failed\n");

drivers/misc/lis3lv02d/lis3lv02d.c

940

pr_err("No second IRQ. Limited functionality\n");

drivers/misc/lkdtm/bugs.c

263

pr_err("FAIL: global stack canary found at offset %ld (canary for pid %d matches init_task's)!\n",

drivers/misc/lkdtm/bugs.c

323

pr_err("XFAIL: arch has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS\n");

drivers/misc/lkdtm/bugs.c

356

pr_err("FAIL: no other online CPUs\n");

drivers/misc/lkdtm/bugs.c

362

pr_err("FAIL: did not hang\n");

drivers/misc/lkdtm/bugs.c

461

pr_err("FAIL: survived array bounds overflow!\n");

drivers/misc/lkdtm/bugs.c

482

pr_err("FAIL: could not allocate test struct!\n");

drivers/misc/lkdtm/bugs.c

497

pr_err("FAIL: survived access of invalid flexible array member index!\n");

drivers/misc/lkdtm/bugs.c

526

pr_err("FAIL: could not determine size of inst->buf: %zu\n",

drivers/misc/lkdtm/bugs.c

538

pr_err("FAIL: could not allocate struct lkdtm_cb_ptr!\n");

drivers/misc/lkdtm/bugs.c

544

pr_err("FAIL: could not allocate inst->buf!\n");

drivers/misc/lkdtm/bugs.c

570

pr_err("FAIL: survived access of invalid pointer member offset!\n");

drivers/misc/lkdtm/bugs.c

614

pr_err("Overwrite did not happen, but no BUG?!\n");

drivers/misc/lkdtm/bugs.c

616

pr_err("list_add() corruption not detected!\n");

drivers/misc/lkdtm/bugs.c

641

pr_err("Overwrite did not happen, but no BUG?!\n");

drivers/misc/lkdtm/bugs.c

643

pr_err("list_del() corruption not detected!\n");

drivers/misc/lkdtm/bugs.c

659

pr_err("FAIL: accessed page before stack! (byte: %x)\n", byte);

drivers/misc/lkdtm/bugs.c

673

pr_err("FAIL: accessed page after stack! (byte: %x)\n", byte);

drivers/misc/lkdtm/bugs.c

688

pr_err("FAIL: SMEP not in use\n");

drivers/misc/lkdtm/bugs.c

696

pr_err("FAIL: pinning SMEP failed!\n");

drivers/misc/lkdtm/bugs.c

733

pr_err("FAIL: cleared SMEP not detected!\n");

drivers/misc/lkdtm/bugs.c

739

pr_err("XFAIL: this test is x86_64-only\n");

drivers/misc/lkdtm/bugs.c

774

pr_err("FAIL: tried to double fault but didn't die\n");

drivers/misc/lkdtm/bugs.c

776

pr_err("XFAIL: this test is ia32-only\n");

drivers/misc/lkdtm/bugs.c

798

pr_err("FAIL: kernel not built with CONFIG_ARM64_PTR_AUTH_KERNEL\n");

drivers/misc/lkdtm/bugs.c

801

pr_err("FAIL: CPU lacks pointer authentication feature\n");

drivers/misc/lkdtm/bugs.c

814

pr_err("FAIL: survived PAC changes! Kernel may be unstable from here\n");

drivers/misc/lkdtm/bugs.c

816

pr_err("XFAIL: this test is arm64-only\n");

drivers/misc/lkdtm/cfi.c

151

pr_err("FAIL: stack return address manipulation failed!\n");

drivers/misc/lkdtm/cfi.c

177

pr_err("FAIL: stack return address was redirected!\n");

drivers/misc/lkdtm/cfi.c

45

pr_err("FAIL: survived mismatched prototype function call!\n");

drivers/misc/lkdtm/core.c

402

pr_err("Need both cpoint_type and cpoint_name or neither\n");

drivers/misc/lkdtm/core.c

409

pr_err("Unknown crashtype '%s'\n", cpoint_type);

drivers/misc/lkdtm/core.c

422

pr_err("Invalid crashpoint %s\n", cpoint_name);

drivers/misc/lkdtm/fortify.c

101

pr_err("FAIL: fortify did not block a memcpy() object write overflow!\n");

drivers/misc/lkdtm/fortify.c

133

pr_err("FAIL: fortify did not block a memcpy() struct member write overflow!\n");

drivers/misc/lkdtm/fortify.c

206

pr_err("FAIL: strscpy() overflow not detected!\n");

drivers/misc/lkdtm/fortify.c

33

pr_err("FAIL: fortify did not block a strncpy() object write overflow!\n");

drivers/misc/lkdtm/fortify.c

65

pr_err("FAIL: fortify did not block a strncpy() struct member write overflow!\n");

drivers/misc/lkdtm/heap.c

129

pr_err("FAIL: Memory was not poisoned!\n");

drivers/misc/lkdtm/heap.c

163

pr_err("FAIL: Unable to allocate kfence memory!\n");

drivers/misc/lkdtm/heap.c

180

pr_err("FAIL: Memory was not poisoned!\n");

drivers/misc/lkdtm/heap.c

191

pr_err("FAIL: kfence memory never allocated!\n");

drivers/misc/lkdtm/heap.c

244

pr_err("FAIL: Buddy page was not poisoned!\n");

drivers/misc/lkdtm/heap.c

277

pr_err("FAIL: Slab was not initialized\n");

drivers/misc/lkdtm/heap.c

310

pr_err("FAIL: Slab was not initialized\n");

drivers/misc/lkdtm/kstack_erase.c

117

pr_err("FAIL: the thread stack is NOT properly erased!\n");

drivers/misc/lkdtm/kstack_erase.c

136

pr_err("XFAIL: stackleak is not enabled (CONFIG_KSTACK_ERASE=n)\n");

drivers/misc/lkdtm/kstack_erase.c

138

pr_err("XFAIL: stackleak is not supported on this arch (HAVE_ARCH_KSTACK_ERASE=n)\n");

drivers/misc/lkdtm/kstack_erase.c

47

pr_err("FAIL: current_stack_pointer (0x%lx) outside of task stack bounds [0x%lx..0x%lx]\n",

drivers/misc/lkdtm/kstack_erase.c

54

pr_err("FAIL: current->lowest_stack (0x%lx) outside of task stack bounds [0x%lx..0x%lx]\n",

drivers/misc/lkdtm/kstack_erase.c

92

pr_err("FAIL: non-poison value %lu bytes below poison boundary: 0x%lx\n",

drivers/misc/lkdtm/lkdtm.h

14

pr_err("Unexpected! This %s was built with " #kconfig "=y\n", \

drivers/misc/lkdtm/lkdtm.h

32

pr_err("Unexpected! This %s was built with " #kconfig "=y and booted with '" param "=Y'\n", \

drivers/misc/lkdtm/lkdtm.h

36

pr_err("Unexpected! This %s was built with " #kconfig "=y (and booted without '" param "' specified)\n", \

drivers/misc/lkdtm/lkdtm.h

46

pr_err("Unexpected! This %s was built *without* " #kconfig "=y but booted with '" param "=Y'\n", \

drivers/misc/lkdtm/lkdtm.h

50

pr_err("This is probably expected, since this %s was built *without* " #kconfig "=y (and booted without '" param "' specified)\n", \

drivers/misc/lkdtm/perms.c

114

pr_err("FAIL: func returned\n");

drivers/misc/lkdtm/perms.c

124

pr_err("FAIL: survived bad write\n");

drivers/misc/lkdtm/perms.c

143

pr_err("FAIL: survived bad write\n");

drivers/misc/lkdtm/perms.c

158

pr_err("FAIL: survived bad write\n");

drivers/misc/lkdtm/perms.c

174

pr_err("FAIL: survived bad write\n");

drivers/misc/lkdtm/perms.c

255

pr_err("FAIL: survived bad read\n");

drivers/misc/lkdtm/perms.c

259

pr_err("FAIL: survived bad write\n");

drivers/misc/lkdtm/perms.c

272

pr_err("FAIL: survived bad read\n");

drivers/misc/lkdtm/perms.c

276

pr_err("FAIL: survived bad write\n");

drivers/misc/lkdtm/perms.c

88

pr_err("FAIL: func returned\n");

drivers/misc/lkdtm/powerpc.c

118

pr_err("XFAIL: This test is for ppc64 and with hash mode MMU only\n");

drivers/misc/lkdtm/refcount.c

140

pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref));

drivers/misc/lkdtm/refcount.c

19

pr_err("Fail: refcount wrapped to %d\n", refcount_read(ref));

drivers/misc/lkdtm/refcount.c

231

pr_err("Fail: refcount went past zero!\n");

drivers/misc/lkdtm/refcount.c

233

pr_err("Fail: Zero not detected!?\n");

drivers/misc/lkdtm/refcount.c

256

pr_err("Fail: refcount went past zero\n");

drivers/misc/lkdtm/refcount.c

258

pr_err("Fail: Zero not detected!?\n");

drivers/misc/lkdtm/refcount.c

277

pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref));

drivers/misc/lkdtm/refcount.c

379

pr_err("atomic timing: out of sync up/down cycle: %u\n", i - 1);

drivers/misc/lkdtm/refcount.c

404

pr_err("refcount: out of sync up/down cycle: %u\n", i - 1);

drivers/misc/lkdtm/refcount.c

97

pr_err("Fail: refcount went crazy: %d\n", refcount_read(ref));

drivers/misc/lkdtm/usercopy.c

188

pr_err("FAIL: bad usercopy not detected!\n");

drivers/misc/lkdtm/usercopy.c

265

pr_err("FAIL: bad usercopy not detected!\n");

drivers/misc/lkdtm/usercopy.c

338

pr_err("FAIL: bad copy_to_user() not detected!\n");

drivers/misc/lkdtm/usercopy.c

372

pr_err("copy_to_user() failed unexpectedly?!\n");

drivers/misc/lkdtm/usercopy.c

383

pr_err("FAIL: bad copy_to_user() not detected!\n");

drivers/misc/lkdtm/usercopy.c

396

pr_err("vmalloc() failed!?\n");

drivers/misc/lkdtm/usercopy.c

414

pr_err("folio_alloc() failed!?\n");

drivers/misc/lkdtm/usercopy.c

421

pr_err("folio_address() failed?!\n");

drivers/misc/mei/main.c

1342

pr_err("unable to allocate char dev region\n");

drivers/misc/mei/main.c

1348

pr_err("unable to initialize bus\n");

drivers/misc/ocxl/afu_irq.c

76

pr_err("irq_create_mapping failed\n");

drivers/misc/ocxl/afu_irq.c

92

pr_err("request_irq failed: %d\n", rc);

drivers/misc/ocxl/file.c

604

pr_err("Unable to allocate ocxl major number: %d\n", rc);

drivers/misc/ocxl/file.c

610

pr_err("Unable to create ocxl class\n");

drivers/misc/rpmb-core.c

208

pr_err("couldn't create class\n");

drivers/misc/vmw_vmci/vmci_driver.c

122

pr_err("Failed to initialize VMCIEvent (result=%d)\n",

drivers/mmc/core/block.c

1147

pr_err("%s: Locking boot partition ro until next power on failed: %d\n",

drivers/mmc/core/block.c

1163

pr_err("%s: unknown driver specific operation\n",

drivers/mmc/core/block.c

1945

pr_err("%s: recovery failed!\n", req->q->disk->disk_name);

drivers/mmc/core/block.c

2970

pr_err("%s: could not add character device\n", rpmb_name);

drivers/mmc/core/block.c

3131

pr_err("FAILED %d\n", err);

drivers/mmc/core/block.c

3278

pr_err("Failed to create mmc completion workqueue");

drivers/mmc/core/block.c

3403

pr_err("mmcblk: could not register RPMB bus type\n");

drivers/mmc/core/block.c

3408

pr_err("mmcblk: failed to allocate rpmb chrdev region\n");

drivers/mmc/core/core.c

1683

pr_err("mmc_erase: group start error %d, "

drivers/mmc/core/core.c

1704

pr_err("mmc_erase: group end error %d, status %#x\n",

drivers/mmc/core/core.c

1718

pr_err("mmc_erase: erase error %d, status %#x\n",

drivers/mmc/core/core.c

956

pr_err("%s: tuning execution failed: %d\n",

drivers/mmc/core/mmc.c

1122

pr_err("%s: switch to bus width %d ddr failed\n",

drivers/mmc/core/mmc.c

115

pr_err("%s: card has unknown MMCA version %d\n",

drivers/mmc/core/mmc.c

1190

pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",

drivers/mmc/core/mmc.c

1219

pr_err("%s: switch to bus width for hs400 failed, err:%d\n",

drivers/mmc/core/mmc.c

1232

pr_err("%s: switch to hs400 failed, err:%d\n",

drivers/mmc/core/mmc.c

1259

pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),

drivers/mmc/core/mmc.c

1339

pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),

drivers/mmc/core/mmc.c

1384

pr_err("%s: switch to 8bit bus width failed, err:%d\n",

drivers/mmc/core/mmc.c

1396

pr_err("%s: switch to hs for hs400es failed, err:%d\n",

drivers/mmc/core/mmc.c

1419

pr_err("%s: switch to bus width for hs400es failed, err:%d\n",

drivers/mmc/core/mmc.c

1434

pr_err("%s: switch to hs400es failed, err:%d\n",

drivers/mmc/core/mmc.c

1454

pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),

drivers/mmc/core/mmc.c

1534

pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),

drivers/mmc/core/mmc.c

163

pr_err("%s: unrecognised CSD structure version %d\n",

drivers/mmc/core/mmc.c

1941

pr_err("%s: Host failed to negotiate down from 3.3V\n",

drivers/mmc/core/mmc.c

2050

pr_err("%s: Power Off Notification timed out, %u\n",

drivers/mmc/core/mmc.c

2115

pr_err("%s: cache flush error %d\n", mmc_hostname(host), err);

drivers/mmc/core/mmc.c

2265

pr_err("%s: error %d doing aggressive suspend\n",

drivers/mmc/core/mmc.c

2280

pr_err("%s: error %d doing runtime resume\n",

drivers/mmc/core/mmc.c

2355

pr_err("%s: undervoltage suspend failed: %pe\n",

drivers/mmc/core/mmc.c

2446

pr_err("%s: error %d whilst initialising MMC card\n",

drivers/mmc/core/mmc.c

390

pr_err("%s: unrecognised EXT_CSD structure "

drivers/mmc/core/mmc.c

701

pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",

drivers/mmc/core/mmc_ops.c

1064

pr_err("%s: Sanitize failed err=%d\n", mmc_hostname(host), err);

drivers/mmc/core/mmc_ops.c

535

pr_err("%s: Card stuck being busy! %s\n",

drivers/mmc/core/mmc_ops.c

796

pr_err("%s: Invalid bus_width %d\n",

drivers/mmc/core/mmc_ops.c

918

pr_err("%s: Get card status fail\n", mmc_hostname(card->host));

drivers/mmc/core/mmc_ops.c

983

pr_err("%s: Failed to read bkops status: %d\n",

drivers/mmc/core/sd.c

1278

pr_err("%s: error %d reading general info of SD ext reg\n",

drivers/mmc/core/sd.c

1312

pr_err("%s: error %d parsing SD ext reg\n",

drivers/mmc/core/sd.c

1596

pr_err("%s: Host failed to negotiate down from 3.3V\n",

drivers/mmc/core/sd.c

1810

pr_err("%s: error %d doing aggressive suspend\n",

drivers/mmc/core/sd.c

1825

pr_err("%s: error %d doing runtime resume\n",

drivers/mmc/core/sd.c

1918

pr_err("%s: error %d whilst initialising SD card\n",

drivers/mmc/core/sd.c

194

pr_err("%s: unrecognised CSD structure version %d\n",

drivers/mmc/core/sd.c

218

pr_err("%s: unrecognised SCR structure version %d\n",

drivers/mmc/core/sd.c

247

pr_err("%s: invalid bus width\n", mmc_hostname(card->host));

drivers/mmc/core/sd_uhs2.c

1121

pr_err("%s: error %d doing aggressive suspend\n", mmc_hostname(host), err);

drivers/mmc/core/sd_uhs2.c

1132

pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err);

drivers/mmc/core/sd_uhs2.c

192

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

198

pr_err("%s: DEVICE_INIT response is wrong!\n",

drivers/mmc/core/sd_uhs2.c

213

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

256

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

262

pr_err("%s: ENUMERATE response is wrong!\n",

drivers/mmc/core/sd_uhs2.c

308

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

356

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

413

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

510

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

576

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

582

pr_err("%s: %s: UHS2 CMD not accepted, resp= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

625

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

657

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

665

pr_err("%s: %s: UHS2 SET_CONFIG fail!\n", mmc_hostname(host), __func__);

drivers/mmc/core/sd_uhs2.c

681

pr_err("%s: %s: UHS2 DISABLE_INT fail!\n",

drivers/mmc/core/sd_uhs2.c

706

pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

771

pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail, err= 0x%x!\n",

drivers/mmc/core/sd_uhs2.c

794

pr_err("%s: %s: Not switch to Active in 100 ms\n", mmc_hostname(host), __func__);

drivers/mmc/core/sdio.c

1331

pr_err("%s: error %d whilst initialising SDIO card\n",

drivers/mmc/core/sdio.c

159

pr_err("%s: unrecognised CCCR structure version %d\n",

drivers/mmc/core/sdio.c

897

pr_err("%s: Host failed to negotiate down from 3.3V\n",

drivers/mmc/core/sdio_cis.c

144

pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n",

drivers/mmc/host/au1xmmc.c

1196

pr_err("au1xmmc: cannot add memory dbdma\n");

drivers/mmc/host/cqhci-core.c

111

pr_err("%s: " DRV_NAME ": " f, mmc_hostname(mmc), ## x)

drivers/mmc/host/cqhci-core.c

1206

pr_err("%s: CQHCI crypto initialization failed\n",

drivers/mmc/host/cqhci-core.c

1223

pr_err("%s: CQHCI version %u.%02u failed to initialize, error %d\n",

drivers/mmc/host/cqhci-core.c

352

pr_err("%s: Failed to enable CQE, error %d\n",

drivers/mmc/host/cqhci-core.c

392

pr_err("%s: cqhci: CQE stuck on\n", mmc_hostname(mmc));

drivers/mmc/host/cqhci-core.c

475

pr_err("%s: sg-len: %d\n", __func__, data->sg_len);

drivers/mmc/host/cqhci-core.c

518

pr_err("%s: %s: unable to map sg lists, %d\n",

drivers/mmc/host/cqhci-core.c

610

pr_err("%s: cqhci: not enabled\n", mmc_hostname(mmc));

drivers/mmc/host/cqhci-core.c

626

pr_err("%s: cqhci: CQE failed to exit halt state\n",

drivers/mmc/host/cqhci-core.c

638

pr_err("%s: cqhci: failed to setup tx desc: %d\n",

drivers/mmc/host/cqhci-core.c

922

pr_err("%s: cqhci: timeout for tag %d, qcnt %d\n",

drivers/mmc/host/dw_mmc-bluefield.c

49

pr_err("RST_N failed.\n");

drivers/mmc/host/pxamci.c

551

pr_err("%s: DMA error on %s channel\n", mmc_hostname(host->mmc),

drivers/mmc/host/sdhci-bcm-kona.c

62

pr_err("Error: sd host is stuck in reset!!!\n");

drivers/mmc/host/sdhci-brcmstb.c

188

pr_err("%s: Reset 0x%x never completed.\n",

drivers/mmc/host/sdhci-esdhc-imx.c

440

pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)

drivers/mmc/host/sdhci-milbeaut.c

109

pr_err("%s: Internal clock never stabilised.\n",

drivers/mmc/host/sdhci-msm.c

1001

pr_err("%s: %s: CDC error code %d\n",

drivers/mmc/host/sdhci-msm.c

1060

pr_err("%s: %s: CM_DLL_SDC4 calibration was not completed\n",

drivers/mmc/host/sdhci-msm.c

1337

pr_err("%s: Failed to calibrate DLL for hs400 mode (%d)\n",

drivers/mmc/host/sdhci-msm.c

1659

pr_err("%s: PWRCTL_STATUS: 0x%08x | PWRCTL_MASK: 0x%08x | PWRCTL_CTL: 0x%08x\n",

drivers/mmc/host/sdhci-msm.c

1694

pr_err("%s: Timedout clearing (0x%x) pwrctl status register\n",

drivers/mmc/host/sdhci-msm.c

2384

pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)

drivers/mmc/host/sdhci-msm.c

382

pr_err("%s: Failed to set clock at rate %u at timing %d\n",

drivers/mmc/host/sdhci-msm.c

874

pr_err("%s: Unable to get DLL_LOCK/DDR_DLL_LOCK, dll_status: 0x%08x\n",

drivers/mmc/host/sdhci-msm.c

993

pr_err("%s: %s: CDC calibration was not completed\n",

drivers/mmc/host/sdhci-of-arasan.c

379

pr_err("%s: Cannot power on phy.\n",

drivers/mmc/host/sdhci-of-arasan.c

447

pr_err("%s: Cannot power on phy.\n",

drivers/mmc/host/sdhci-of-arasan.c

812

pr_err("Error setting Output Tap Delay\n");

drivers/mmc/host/sdhci-of-arasan.c

881

pr_err("Error setting Input Tap Delay\n");

drivers/mmc/host/sdhci-of-at91.c

91

pr_err("%s: Internal clock never stabilised.\n",

drivers/mmc/host/sdhci-of-dwcmshc.c

1409

pr_err("%s: delay code tuning failed!\n", mmc_hostname(host->mmc));

drivers/mmc/host/sdhci-of-dwcmshc.c

1478

pr_err("%s: phase code tuning failed!\n", mmc_hostname(host->mmc));

drivers/mmc/host/sdhci-of-dwcmshc.c

1492

pr_err("%s: Final phase code 0x%x verification failed!\n",

drivers/mmc/host/sdhci-of-dwcmshc.c

1571

pr_err("%s: DLL lock timeout! status: 0x%x\n",

drivers/mmc/host/sdhci-of-dwcmshc.c

1578

pr_err("%s: DLL lock failed!err_status:0x%x\n",

drivers/mmc/host/sdhci-of-dwcmshc.c

1677

pr_err("%s: RST_N failed.\n", mmc_hostname(host->mmc));

drivers/mmc/host/sdhci-of-esdhc.c

615

pr_err("%s: Internal clock never stabilised.\n",

drivers/mmc/host/sdhci-of-esdhc.c

641

pr_err("%s: flushing asynchronous FIFO timeout.\n",

drivers/mmc/host/sdhci-of-esdhc.c

736

pr_err("%s: Internal clock never stabilised.\n",

drivers/mmc/host/sdhci-of-esdhc.c

769

pr_err("%s: timeout for delay chain lock.\n",

drivers/mmc/host/sdhci-pci-gli.c

1023

pr_err("%s: Reset 0x%x never completed.\n", mmc_hostname(host->mmc), (int)mask);

drivers/mmc/host/sdhci-pci-gli.c

1904

pr_err("%s: PLL clock never stabilised.\n",

drivers/mmc/host/sdhci-pci-gli.c

994

pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc));

drivers/mmc/host/sdhci-pci-o2micro.c

100

pr_err("%s: Card Detect debounce never finished.\n",

drivers/mmc/host/sdhci-pci-o2micro.c

136

pr_err("%s: Internal clock never stabilised.\n",

drivers/mmc/host/sdhci-pci-o2micro.c

296

pr_err("%s: card present detect failed.\n",

drivers/mmc/host/sdhci-pci-o2micro.c

304

pr_err("%s: DLL adjust over max times\n",

drivers/mmc/host/sdhci-pci-o2micro.c

393

pr_err("%s: o2 dll recovery failed\n",

drivers/mmc/host/sdhci-pci-o2micro.c

557

pr_err("%s: enable PCI MSI failed, err=%d\n",

drivers/mmc/host/sdhci-sprd.c

282

pr_err("%s: DLL locked fail!\n", mmc_hostname(host->mmc));

drivers/mmc/host/sdhci-sprd.c

503

pr_err("%s: Switching signalling voltage failed\n",

drivers/mmc/host/sdhci-sprd.c

517

pr_err("%s: failed to select uhs pin state\n",

drivers/mmc/host/sdhci-sprd.c

529

pr_err("%s: failed to select default pin state\n",

drivers/mmc/host/sdhci-uhs2.c

1005

pr_err("%s: Got cmd interrupt 0x%08x but no cmd.\n",

drivers/mmc/host/sdhci-uhs2.c

1018

pr_err("%s: Got data interrupt 0x%08x but no data.\n",

drivers/mmc/host/sdhci-uhs2.c

1026

pr_err("%s: Got deadlock timeout interrupt 0x%08x\n",

drivers/mmc/host/sdhci-uhs2.c

1031

pr_err("%s: ADMA error = 0x %x\n",

drivers/mmc/host/sdhci-uhs2.c

28

pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)

drivers/mmc/host/sdhci-uhs2.c

369

pr_err("%s: SDHCI_UHS2_CAPS_PTR(%d) is wrong.\n",

drivers/mmc/host/sdhci-uhs2.c

466

pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc));

drivers/mmc/host/sdhci-uhs2.c

549

pr_err("%s: input sd uhs2 operation %d is wrong!\n",

drivers/mmc/host/sdhci-uhs2.c

744

pr_err("%s: Controller never released inhibit bit(s).\n",

drivers/mmc/host/sdhci-uhs2.c

785

pr_err("%s: NACK response, ECODE=0x%x.\n",

drivers/mmc/host/sdhci.c

1346

pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n",

drivers/mmc/host/sdhci.c

1768

pr_err("%s: Controller never released inhibit bit(s).\n",

drivers/mmc/host/sdhci.c

2024

pr_err("%s: Internal clock never stabilised.\n",

drivers/mmc/host/sdhci.c

2047

pr_err("%s: PLL clock never stabilised.\n",

drivers/mmc/host/sdhci.c

227

pr_err("%s: Reset 0x%x never completed.\n",

drivers/mmc/host/sdhci.c

3066

pr_err("%s: Card removed during transfer!\n",

drivers/mmc/host/sdhci.c

3068

pr_err("%s: Resetting controller.\n",

drivers/mmc/host/sdhci.c

3116

pr_err("%s: bounce buffer is %u bytes but DMA claims to have transferred %u bytes\n",

drivers/mmc/host/sdhci.c

3248

pr_err("%s: Timeout waiting for hardware cmd interrupt.\n",

drivers/mmc/host/sdhci.c

3271

pr_err("%s: Timeout waiting for hardware interrupt.\n",

drivers/mmc/host/sdhci.c

3323

pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n",

drivers/mmc/host/sdhci.c

3462

pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n",

drivers/mmc/host/sdhci.c

3490

pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc),

drivers/mmc/host/sdhci.c

3629

pr_err("%s: Card is consuming too much power!\n",

drivers/mmc/host/sdhci.c

3689

pr_err("%s: Unexpected interrupt 0x%08x.\n",

drivers/mmc/host/sdhci.c

4040

pr_err("%s: Card is consuming too much power!\n",

drivers/mmc/host/sdhci.c

4046

pr_err("%s: CQE: Unexpected interrupt 0x%08x.\n",

drivers/mmc/host/sdhci.c

4220

pr_err("%s: failed to allocate %u bytes for bounce buffer, falling back to single segments\n",

drivers/mmc/host/sdhci.c

43

pr_err("%s: " DRIVER_NAME ": " f, mmc_hostname(host->mmc), ## x)

drivers/mmc/host/sdhci.c

4307

pr_err("%s: Unknown controller version (%d). You may experience problems.\n",

drivers/mmc/host/sdhci.c

4433

pr_err("%s: Hardware doesn't specify base clock frequency.\n",

drivers/mmc/host/sdhci.c

4485

pr_err("%s: Hardware doesn't specify timeout clock frequency.\n",

drivers/mmc/host/sdhci.c

4724

pr_err("%s: Hardware doesn't report any support voltages.\n",

drivers/mmc/host/sdhci.c

4885

pr_err("%s: Failed to request IRQ %d: %d\n",

drivers/mmc/host/sdhci.c

4892

pr_err("%s: Failed to register LED device: %d\n",

drivers/mmc/host/sdhci.c

4958

pr_err("%s: Controller removed during "

drivers/mmc/host/sdhci.c

670

pr_err("%s: asked for transfer of %u bytes exceeds bounce buffer %u bytes\n",

drivers/mmc/host/sdhci_am654.c

373

pr_err("%s: Switching to 1.8V signalling voltage failed,\n",

drivers/mmc/host/tifm_sd.c

627

pr_err("%s : unfinished request detected\n",

drivers/mmc/host/tifm_sd.c

667

pr_err("%s : scatterlist map failed\n",

drivers/mmc/host/tifm_sd.c

679

pr_err("%s : scatterlist map failed\n",

drivers/mmc/host/tifm_sd.c

743

pr_err(" %s : no request to complete?\n",

drivers/mmc/host/tifm_sd.c

782

pr_err("%s : card failed to respond for a long period of time "

drivers/mmc/host/tifm_sd.c

899

pr_err("%s : controller failed to reset\n",

drivers/mmc/host/tifm_sd.c

925

pr_err("%s : card not ready - probe failed on initialization\n",

drivers/mmc/host/tmio_mmc_core.c

451

pr_err("PIO IRQ in DMA mode!\n");

drivers/mmc/host/tmio_mmc_core.c

777

pr_err("%s: %d byte block unsupported in 4/8 bit mode\n",

drivers/mmc/host/via-sdmmc.c

1006

pr_err("%s: Card removed during transfer!\n",

drivers/mmc/host/via-sdmmc.c

1186

pr_err("%s: Controller removed during "

drivers/mmc/host/via-sdmmc.c

589

pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc));

drivers/mmc/host/via-sdmmc.c

840

pr_err("%s: Got command interrupt 0x%x even "

drivers/mmc/host/via-sdmmc.c

922

pr_err("%s: Unexpected interrupt 0x%x\n",

drivers/mmc/host/via-sdmmc.c

945

pr_err("%s: Timeout waiting for hardware interrupt."

drivers/mmc/host/vub300.c

2432

pr_err("not enough memory for the REQUEST workqueue");

drivers/mmc/host/vub300.c

2438

pr_err("not enough memory for the IRQPOLL workqueue");

drivers/mmc/host/vub300.c

2444

pr_err("not enough memory for the EXPIRED workqueue");

drivers/mmc/host/vub300.c

2450

pr_err("usb_register failed. Error number %d", result);

drivers/mmc/host/wbsd.c

1018

pr_err("%s: Card removed during transfer!\n",

drivers/mmc/host/wbsd.c

194

pr_err("%s: Resetting chip\n", mmc_hostname(host->mmc));

drivers/mmc/host/wbsd.c

713

pr_err("%s: Incomplete DMA transfer. "

drivers/most/configfs.c

103

pr_err("Config failed\n");

drivers/most/configfs.c

391

pr_err("Removing link failed.\n");

drivers/most/configfs.c

670

pr_err("Error %d while registering subsystem %s\n",

drivers/most/core.c

1166

pr_err("Bad interface or index out of range\n");

drivers/most/core.c

1222

pr_err("Bad component\n");

drivers/most/core.c

1255

pr_err("Bad component\n");

drivers/most/core.c

1470

pr_err("Failed to register most bus\n");

drivers/most/core.c

1475

pr_err("Failed to register core driver\n");

drivers/most/most_snd.c

278

pr_err("Couldn't start thread\n");

drivers/most/most_snd.c

285

pr_err("most_start_channel() failed!\n");

drivers/most/most_snd.c

433

pr_err("Bad PCM format\n");

drivers/most/most_snd.c

458

pr_err("Unsupported PCM format\n");

drivers/most/most_snd.c

463

pr_err("Bad number of channels\n");

drivers/most/most_snd.c

468

pr_err("Audio resolution doesn't fit subbuffer size\n");

drivers/most/most_snd.c

529

pr_err("Incompatible channel type\n");

drivers/most/most_snd.c

565

pr_err("channel (%s:%d) is already linked\n",

drivers/most/most_snd.c

725

pr_err("Failed to register %s\n", comp.name);

drivers/most/most_snd.c

730

pr_err("Failed to register %s configfs subsys\n", comp.name);

drivers/mtd/chips/cfi_cmdset_0002.c

1461

pr_err("Waiting for chip to be ready timed out.\n");

drivers/mtd/chips/cfi_cmdset_0002.c

150

pr_err("%s erase operation failed, status %lx\n",

drivers/mtd/chips/cfi_cmdset_0002.c

153

pr_err("%s program operation failed, status %lx\n",

drivers/mtd/chips/cfi_cmdset_0002.c

156

pr_err("%s buffer program command aborted, status %lx\n",

drivers/mtd/chips/cfi_cmdset_0002.c

159

pr_err("%s sector write protected, status %lx\n",

drivers/mtd/chips/cfi_cmdset_0002.c

1972

pr_err("MTD %s(): software timeout, address:0x%.8lx.\n",

drivers/mtd/devices/bcm47xxsflash.c

168

pr_err("Flash rejected dropping CSA\n");

drivers/mtd/devices/bcm47xxsflash.c

191

pr_err("Timeout reading page 0x%X info buffer\n", page);

drivers/mtd/devices/bcm47xxsflash.c

237

pr_err("Error writing at offset 0x%llX\n", to);

drivers/mtd/devices/bcm47xxsflash.c

33

pr_err("Control command failed (timeout)!\n");

drivers/mtd/devices/bcm47xxsflash.c

349

pr_err("Failed to register MTD device: %d\n", err);

drivers/mtd/devices/bcm47xxsflash.c

60

pr_err("Timeout waiting for flash to be ready!\n");

drivers/mtd/devices/block2mtd.c

284

pr_err("error: cannot open device %s\n", devname);

drivers/mtd/devices/block2mtd.c

291

pr_err("attempting to use an MTD device as a block device\n");

drivers/mtd/devices/block2mtd.c

297

pr_err("erasesize must be a divisor of device size\n");

drivers/mtd/devices/block2mtd.c

419

pr_err("parameter too long\n");

drivers/mtd/devices/block2mtd.c

430

pr_err("too many arguments\n");

drivers/mtd/devices/block2mtd.c

435

pr_err("no argument\n");

drivers/mtd/devices/block2mtd.c

441

pr_err("device name too long\n");

drivers/mtd/devices/block2mtd.c

449

pr_err("illegal erase size\n");

drivers/mtd/devices/block2mtd.c

98

pr_err("erase failed err = %d\n", err);

drivers/mtd/devices/phram.c

141

pr_err("ioremap failed\n");

drivers/mtd/devices/phram.c

163

pr_err("Failed to register new device\n");

drivers/mtd/devices/phram.c

243

pr_err(fmt , ## args); \

drivers/mtd/hyperbus/hyperbus-core.c

68

pr_err("hyperbus: please fill all the necessary fields!\n");

drivers/mtd/lpddr/lpddr2_nvm.c

469

pr_err("device not recognized\n");

drivers/mtd/maps/physmap-versatile.c

131

pr_err("error enabling AP VPP\n");

drivers/mtd/maps/physmap-versatile.c

137

pr_err("error disabling AP VPP\n");

drivers/mtd/maps/physmap-versatile.c

160

pr_err("error setting CP VPP\n");

drivers/mtd/maps/physmap-versatile.c

167

pr_err("error setting CP VPP\n");

drivers/mtd/maps/physmap-versatile.c

184

pr_err("error setting Versatile VPP\n");

drivers/mtd/mtdchar.c

1428

pr_err("Can't allocate major number %d for MTD\n",

drivers/mtd/mtdcore.c

1164

pr_err("Error when deleting MTD device (%d)\n", err);

drivers/mtd/mtdcore.c

2618

pr_err("Error registering mtd class or bdi: %d\n", ret);

drivers/mtd/mtdoops.c

136

pr_err("all blocks bad!\n");

drivers/mtd/mtdoops.c

142

pr_err("mtd_block_isbad failed, aborting\n");

drivers/mtd/mtdoops.c

158

pr_err("block_markbad failed, aborting\n");

drivers/mtd/mtdoops.c

219

pr_err("Cannot write from panic without panic_write\n");

drivers/mtd/mtdoops.c

227

pr_err("write failure at %ld (%td of %ld written), error %d\n",

drivers/mtd/mtdoops.c

262

pr_err("read failure at %ld (%zu of %zu read), err %d\n",

drivers/mtd/mtdoops.c

342

pr_err("MTD partition %d not big enough for mtdoops\n",

drivers/mtd/mtdoops.c

347

pr_err("eraseblock size of MTD partition %d too small\n",

drivers/mtd/mtdoops.c

352

pr_err("mtd%d is too large (limit is %d MiB)\n",

drivers/mtd/mtdoops.c

362

pr_err("could not allocate page array\n");

drivers/mtd/mtdoops.c

370

pr_err("registering kmsg dumper failed, error %d\n", err);

drivers/mtd/mtdoops.c

410

pr_err("mtd device (mtddev=name/number) must be supplied\n");

drivers/mtd/mtdoops.c

414

pr_err("record_size must be a multiple of 4096\n");

drivers/mtd/mtdoops.c

418

pr_err("record_size must be over 4096 bytes\n");

drivers/mtd/mtdpart.c

343

pr_err("Error when deleting partition \"%s\" (%d)\n",

drivers/mtd/mtdpart.c

434

pr_err("Failed to parse subpartitions: %d\n", ret);

drivers/mtd/mtdpstore.c

553

pr_err("mtd device must be supplied (device name is empty)\n");

drivers/mtd/mtdpstore.c

557

pr_err("no backend enabled (kmsg_size is 0)\n");

drivers/mtd/nand/core.c

373

pr_err("Missing ECC engine type\n");

drivers/mtd/nand/core.c

436

pr_err("No ECC engine found\n");

drivers/mtd/nand/core.c

448

pr_err("No suitable ECC configuration\n");

drivers/mtd/nand/ecc-mxic.c

241

pr_err("BCH cannot be used with small page NAND chips\n");

drivers/mtd/nand/ecc-sw-bch.c

149

pr_err("Invalid number of ECC bytes: %u, expected: %u\n",

drivers/mtd/nand/ecc-sw-bch.c

157

pr_err("ECC step size is too large (%u)\n", eccsize);

drivers/mtd/nand/ecc-sw-bch.c

180

pr_err("BCH cannot be used with small page NAND chips\n");

drivers/mtd/nand/ecc-sw-bch.c

226

pr_err("Missing ECC parameters\n");

drivers/mtd/nand/ecc-sw-bch.c

257

pr_err("Invalid ECC layout\n");

drivers/mtd/nand/ecc-sw-bch.c

70

pr_err("ECC unrecoverable error\n");

drivers/mtd/nand/ecc-sw-hamming.c

440

pr_err("%s: uncorrectable ECC error\n", __func__);

drivers/mtd/nand/raw/bcm47xxnflash/main.c

41

pr_err("Device not supported\n");

drivers/mtd/nand/raw/bcm47xxnflash/main.c

45

pr_err("Initialization failed: %d\n", err);

drivers/mtd/nand/raw/bcm47xxnflash/main.c

53

pr_err("Failed to register MTD device: %d\n", err);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

157

pr_err("%s ctl_cmd didn't work!\n", __func__);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

188

pr_err("ctl_cmd didn't work with error %d\n", rc);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

238

pr_err("READID error\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

253

pr_err("READID error\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

265

pr_err("STATUS command error\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

279

pr_err("ERASE1 failed\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

294

pr_err("SEQIN failed\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

299

pr_err("PAGEPROG failed\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

301

pr_err("PAGEPROG not ready\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

304

pr_err("Command 0x%X unsupported\n", command);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

320

pr_err("Requested invalid id_data: %d\n",

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

334

pr_err("Invalid command for byte read: 0x%X\n", b47n->curr_command);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

351

pr_err("Invalid command for buf read: 0x%X\n", b47n->curr_command);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

366

pr_err("Invalid command for buf write: 0x%X\n", b47n->curr_command);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

426

pr_err("Could not scan NAND flash: %d\n", err);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

434

pr_err("Invalid flash size: 0x%lX\n", chipsize);

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

55

pr_err("NFLASH control command not ready!\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

69

pr_err("Error on polling\n");

drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c

77

pr_err("Polling timeout!\n");

drivers/mtd/nand/raw/cadence-nand-controller.c

3274

pr_err("Failed to find the right device id.\n");

drivers/mtd/nand/raw/diskonchip.c

1067

pr_err("BlockMultiplierBits=%d is inconsistent with device size. Aborting.\n", mh->BlockMultiplierBits);

drivers/mtd/nand/raw/diskonchip.c

1073

pr_err("Writeable BBTs spanning more than one erase block are not yet supported. FIX ME!\n");

drivers/mtd/nand/raw/diskonchip.c

1173

pr_err("Multi-floor INFTL devices not yet supported.\n");

drivers/mtd/nand/raw/diskonchip.c

1315

pr_err("Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n",

drivers/mtd/nand/raw/diskonchip.c

1375

pr_err("DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n");

drivers/mtd/nand/raw/diskonchip.c

1454

pr_err("DiskOnChip: Could not create a RS codec\n");

drivers/mtd/nand/raw/diskonchip.c

794

pr_err("doc200x_correct_data corrected %d errors\n",

drivers/mtd/nand/raw/diskonchip.c

802

pr_err("suppressing ECC failure\n");

drivers/mtd/nand/raw/diskonchip.c

899

pr_err("Read DiskOnChip Media Header once, but can't reread it???\n");

drivers/mtd/nand/raw/diskonchip.c

974

pr_err("UnitSizeFactor of 0x%02x is inconsistent with device size. Aborting.\n", mh->UnitSizeFactor);

drivers/mtd/nand/raw/fsl_ifc_nand.c

843

pr_err("fsl-ifc: Failed to Initialise SRAM\n");

drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c

117

pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);

drivers/mtd/nand/raw/nand_base.c

4713

pr_err("%s called for a chip which is not in suspended state\n",

drivers/mtd/nand/raw/nand_base.c

5924

pr_err("ECC (step, strength) = (%d, %d) does not fit in OOB",

drivers/mtd/nand/raw/nand_base.c

5935

pr_err("ECC (step, strength) = (%d, %d) not supported on this controller",

drivers/mtd/nand/raw/nand_base.c

823

pr_err("Failed to configure data interface to SDR timing mode 0\n");

drivers/mtd/nand/raw/nand_bbt.c

1266

pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");

drivers/mtd/nand/raw/nand_bbt.c

788

pr_err("No space left to write bad block table\n");

drivers/mtd/nand/raw/nand_jedec.c

73

pr_err("Could not find valid JEDEC parameter page; aborting\n");

drivers/mtd/nand/raw/nand_legacy.c

639

pr_err("->legacy.cmd_ctrl() should be provided\n");

drivers/mtd/nand/raw/nand_macronix.c

209

pr_err("%s all blocks failed\n", __func__);

drivers/mtd/nand/raw/nand_macronix.c

225

pr_err("%s all blocks failed\n", __func__);

drivers/mtd/nand/raw/nand_macronix.c

245

pr_err("Block protection check failed\n");

drivers/mtd/nand/raw/nand_macronix.c

288

pr_err("Suspending MXIC NAND chip failed (%d)\n", ret);

drivers/mtd/nand/raw/nand_micron.c

506

pr_err("On-die ECC forcefully enabled, not supported\n");

drivers/mtd/nand/raw/nand_micron.c

513

pr_err("On-die ECC selected but not supported\n");

drivers/mtd/nand/raw/nand_onfi.c

208

pr_err("ONFI parameter recovery failed, aborting\n");

drivers/mtd/nand/raw/nandsim.c

178

do { pr_err(" error: " args); } while(0)

drivers/mtd/nand/raw/omap_elm.c

232

pr_err("invalid config bch_type\n");

drivers/mtd/nand/raw/sh_flctl.c

870

pr_err("Invalid address !?\n");

drivers/mtd/parsers/afs.c

242

pr_err("AFS: mtd read failed at 0x%x: %d\n",

drivers/mtd/parsers/afs.c

256

pr_err("AFS: mtd read failed at 0x%x: %d\n",

drivers/mtd/parsers/afs.c

275

pr_err("AFS: bad checksum on v2 image info: %08x\n", crc);

drivers/mtd/parsers/bcm47xxpart.c

135

pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",

drivers/mtd/parsers/bcm47xxpart.c

238

pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",

drivers/mtd/parsers/bcm47xxpart.c

262

pr_err("mtd_read error while reading (offset 0x%X): %d\n",

drivers/mtd/parsers/brcm_u-boot.c

49

pr_err("Failed to read from %s at 0x%zx: %d\n", mtd->name, offset, err);

drivers/mtd/parsers/cmdlinepart.c

123

pr_err("no closing %c found in partition name\n", delim);

drivers/mtd/parsers/cmdlinepart.c

157

pr_err("no partitions allowed after a fill-up partition\n");

drivers/mtd/parsers/cmdlinepart.c

257

pr_err("no mtd-id\n");

drivers/mtd/parsers/cmdlinepart.c

309

pr_err("bad character after partition (%c)\n", *s);

drivers/mtd/parsers/cmdlinepart.c

97

pr_err("partition has size 0\n");

drivers/mtd/parsers/ofpart_bcm4908.c

37

pr_err("failed to parse %s\n", s + len + 1);

drivers/mtd/parsers/ofpart_core.c

196

pr_err("%s: error parsing ofpart partition %pOF (%pOF)\n",

drivers/mtd/parsers/parser_imagetag.c

102

pr_err("invalid kernel length: %*ph\n",

drivers/mtd/parsers/parser_imagetag.c

111

pr_err("invalid total length: %*ph\n",

drivers/mtd/parsers/parser_imagetag.c

83

pr_err("invalid rootfs address: %*ph\n",

drivers/mtd/parsers/parser_imagetag.c

93

pr_err("invalid kernel address: %*ph\n",

drivers/mtd/parsers/parser_trx.c

38

pr_err("mtd_read error while parsing (offset: 0x%zX): %d\n",

drivers/mtd/parsers/parser_trx.c

66

pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err);

drivers/mtd/parsers/parser_trx.c

74

pr_err("MTD reading error: %d\n", err);

drivers/mtd/parsers/qcomsmempart.c

105

pr_err("Unknown ptable version (%d)", le32_to_cpu(ptable->version));

drivers/mtd/parsers/qcomsmempart.c

116

pr_err("Error reading partition table\n");

drivers/mtd/parsers/qcomsmempart.c

70

pr_err("%s: SMEM partition parser is incompatible with 4K sectors\n",

drivers/mtd/parsers/qcomsmempart.c

79

pr_err("Error reading partition table header\n");

drivers/mtd/parsers/qcomsmempart.c

86

pr_err("Partition table magic verification failed\n");

drivers/mtd/parsers/qcomsmempart.c

93

pr_err("Partition numbers exceed the max limit\n");

drivers/mtd/parsers/sharpslpart.c

259

pr_err("sharpslpart: error, read failed at %#llx\n",

drivers/mtd/parsers/sharpslpart.c

305

pr_err("sharpslpart: magic values mismatch\n");

drivers/mtd/parsers/sharpslpart.c

318

pr_err("sharpslpart: partition sizes mismatch\n");

drivers/mtd/parsers/sharpslpart.c

361

pr_err("sharpslpart: both partition tables are invalid\n");

drivers/mtd/parsers/tplink_safeloader.c

38

pr_err("Failed to get partitions table offset\n");

drivers/mtd/parsers/tplink_safeloader.c

44

pr_err("Failed to read from %s at 0x%x\n", mtd->name, offset);

drivers/mtd/parsers/tplink_safeloader.c

56

pr_err("Failed to read from %s at 0x%zx\n", mtd->name, offset + sizeof(hdr));

drivers/mtd/rfd_ftl.c

305

pr_err(PREFIX "'%s': unable to write RFD header at 0x%lx\n",

drivers/mtd/spi-nor/core.c

2262

pr_err("spi-nor: please fill all the necessary fields!\n");

drivers/mtd/tests/mtd_nandecctest.c

278

pr_err("not ok - %s-%zd\n",

drivers/mtd/tests/mtd_test.c

110

pr_err("error: write failed at %#llx\n", addr);

drivers/mtd/tests/mtd_test.c

94

pr_err("error: read failed at %#llx\n", addr);

drivers/mtd/tests/nandbiterrs.c

118

pr_err("error: write_oob failed (%d)\n", err);

drivers/mtd/tests/nandbiterrs.c

145

pr_err("error: read failed at %#llx\n", (long long)offset);

drivers/mtd/tests/nandbiterrs.c

163

pr_err("Error: page offset %u, expected %02x, got %02x\n",

drivers/mtd/tests/nandbiterrs.c

194

pr_err("biterror: Failed to find a '1' bit\n");

drivers/mtd/tests/nandbiterrs.c

225

pr_err("After %d biterrors per subpage, read reported error %d\n",

drivers/mtd/tests/nandbiterrs.c

233

pr_err("ECC failure, read data is incorrect despite read success\n");

drivers/mtd/tests/nandbiterrs.c

339

pr_err("error: cannot get MTD device\n");

drivers/mtd/tests/oobtest.c

188

pr_err("error: readoob failed at %#llx\n",

drivers/mtd/tests/oobtest.c

198

pr_err("error: verify failed at %#llx\n",

drivers/mtd/tests/oobtest.c

202

pr_err("error: too many errors\n");

drivers/mtd/tests/oobtest.c

225

pr_err("error: readoob failed at %#llx\n",

drivers/mtd/tests/oobtest.c

244

pr_err("error: verify failed at %#llx\n",

drivers/mtd/tests/oobtest.c

248

pr_err("error: too many errors\n");

drivers/mtd/tests/oobtest.c

287

pr_err("error: readoob failed at %#llx\n",

drivers/mtd/tests/oobtest.c

298

pr_err("error: verify failed at %#llx\n",

drivers/mtd/tests/oobtest.c

302

pr_err("error: too many errors\n");

drivers/mtd/tests/oobtest.c

358

pr_err("error: cannot get MTD device\n");

drivers/mtd/tests/oobtest.c

510

pr_err("error: can write past end of OOB\n");

drivers/mtd/tests/oobtest.c

532

pr_err("error: can read past end of OOB\n");

drivers/mtd/tests/oobtest.c

555

pr_err("error: wrote past end of device\n");

drivers/mtd/tests/oobtest.c

577

pr_err("error: read past end of device\n");

drivers/mtd/tests/oobtest.c

600

pr_err("error: wrote past end of device\n");

drivers/mtd/tests/oobtest.c

622

pr_err("error: read past end of device\n");

drivers/mtd/tests/oobtest.c

694

pr_err("error: verify failed at %#llx\n",

drivers/mtd/tests/oobtest.c

699

pr_err("error: too many errors\n");

drivers/mtd/tests/oobtest.c

75

pr_err("error: writeoob failed at %#llx\n",

drivers/mtd/tests/oobtest.c

77

pr_err("error: use_len %d, use_offset %d\n",

drivers/mtd/tests/pagetest.c

102

pr_err("error: verify failed at %#llx\n",

drivers/mtd/tests/pagetest.c

180

pr_err("verify failed!\n");

drivers/mtd/tests/pagetest.c

227

pr_err("verify failed!\n");

drivers/mtd/tests/pagetest.c

257

pr_err("verify failed!\n");

drivers/mtd/tests/pagetest.c

306

pr_err("verifying all 0xff failed at %d\n",

drivers/mtd/tests/pagetest.c

339

pr_err("error: cannot get MTD device\n");

drivers/mtd/tests/pagetest.c

79

pr_err("error: verify failed at %#llx\n",

drivers/mtd/tests/readtest.c

131

pr_err("error: Cannot get MTD device\n");

drivers/mtd/tests/readtest.c

63

pr_err("error: read oob failed at "

drivers/mtd/tests/speedtest.c

196

pr_err("error: cannot get MTD device\n");

drivers/mtd/tests/speedtest.c

55

pr_err("error %d while erasing EB %d, blocks %d\n",

drivers/mtd/tests/stresstest.c

147

pr_err("error: cannot get MTD device\n");

drivers/mtd/tests/stresstest.c

170

pr_err("error: need at least 2 eraseblocks\n");

drivers/mtd/tests/subpagetest.c

132

pr_err("error: read failed at %#llx\n",

drivers/mtd/tests/subpagetest.c

138

pr_err("error: verify failed at %#llx\n",

drivers/mtd/tests/subpagetest.c

159

pr_err("error: read failed at %#llx\n",

drivers/mtd/tests/subpagetest.c

196

pr_err("error: read failed at "

drivers/mtd/tests/subpagetest.c

202

pr_err("error: verify failed at %#llx\n",

drivers/mtd/tests/subpagetest.c

229

pr_err("error: read failed at "

drivers/mtd/tests/subpagetest.c

235

pr_err("error: verify 0xff failed at "

drivers/mtd/tests/subpagetest.c

288

pr_err("error: cannot get MTD device\n");

drivers/mtd/tests/subpagetest.c

52

pr_err("error: write failed at %#llx\n",

drivers/mtd/tests/subpagetest.c

55

pr_err(" write size: %#x\n", subpgsize);

drivers/mtd/tests/subpagetest.c

56

pr_err(" written: %#zx\n", written);

drivers/mtd/tests/subpagetest.c

66

pr_err("error: write failed at %#llx\n",

drivers/mtd/tests/subpagetest.c

69

pr_err(" write size: %#x\n", subpgsize);

drivers/mtd/tests/subpagetest.c

70

pr_err(" written: %#zx\n", written);

drivers/mtd/tests/subpagetest.c

90

pr_err("error: write failed at %#llx\n",

drivers/mtd/tests/subpagetest.c

93

pr_err(" write size: %#x\n",

drivers/mtd/tests/subpagetest.c

95

pr_err(" written: %#08zx\n",

drivers/mtd/tests/torturetest.c

104

pr_err("single bit flip occurred at EB %d "

drivers/mtd/tests/torturetest.c

107

pr_err("error %d while reading EB %d, "

drivers/mtd/tests/torturetest.c

113

pr_err("failed to read %zd bytes from EB %d, "

drivers/mtd/tests/torturetest.c

120

pr_err("read wrong data from EB %d\n", ebnum);

drivers/mtd/tests/torturetest.c

156

pr_err("error %d while writing EB %d, written %zd"

drivers/mtd/tests/torturetest.c

196

pr_err("error: cannot get MTD device\n");

drivers/mtd/tests/torturetest.c

208

pr_err("error: invalid pgcnt value %d\n", pgcnt);

drivers/mtd/ubi/attach.c

1223

pr_err("Corrupted PEBs are:");

drivers/mtd/ubi/attach.c

904

pr_err("hexdump of PEB %d offset %d, length %d",

drivers/mtd/ubi/block.c

115

pr_err("UBI: block: parameter \"%s\" is too long, max. is %d\n",

drivers/mtd/ubi/block.c

393

pr_err("ubiblock%d_%d: blk_mq_alloc_tag_set failed\n",

drivers/mtd/ubi/block.c

411

pr_err("ubiblock%d_%d: block: dynamic minor allocation failed\n",

drivers/mtd/ubi/block.c

596

pr_err(

drivers/mtd/ubi/build.c

1280

pr_err("UBI error: cannot open mtd %s, error %d\n",

drivers/mtd/ubi/build.c

1295

pr_err("UBI error: cannot attach mtd%d\n",

drivers/mtd/ubi/build.c

1341

pr_err("UBI error: too many MTD devices, maximum is %d\n",

drivers/mtd/ubi/build.c

1353

pr_err("UBI error: cannot register device\n");

drivers/mtd/ubi/build.c

1371

pr_err("UBI error: block: cannot initialize, error %d\n", err);

drivers/mtd/ubi/build.c

1399

pr_err("UBI error: cannot initialize UBI, error %d\n", err);

drivers/mtd/ubi/build.c

1439

pr_err("UBI error: incorrect bytes count: \"%s\"\n", str);

drivers/mtd/ubi/build.c

1456

pr_err("UBI error: incorrect bytes count: \"%s\"\n", str);

drivers/mtd/ubi/build.c

1483

pr_err("UBI error: too many parameters, max. is %d\n",

drivers/mtd/ubi/build.c

1490

pr_err("UBI error: parameter \"%s\" is too long, max. is %d\n",

drivers/mtd/ubi/build.c

1510

pr_err("UBI error: too many arguments at \"%s\"\n", val);

drivers/mtd/ubi/build.c

1530

pr_err("UBI error: bad value for max_beb_per1024 parameter: %s\n",

drivers/mtd/ubi/build.c

1541

pr_err("UBI error: bad value for ubi_num parameter: %s\n",

drivers/mtd/ubi/build.c

1553

pr_err("UBI error: bad value for enable_fm parameter: %s\n",

drivers/mtd/ubi/build.c

1565

pr_err("UBI error: bad value for need_resv_pool parameter: %s\n",

drivers/mtd/ubi/build.c

871

pr_err("ubi: mtd%d is already attached to ubi%d\n",

drivers/mtd/ubi/build.c

886

pr_err("ubi: refuse attaching mtd%d - it is already emulated on top of UBI\n",

drivers/mtd/ubi/build.c

900

pr_err("ubi: refuse attaching mtd%d - MLC NAND is not supported\n",

drivers/mtd/ubi/build.c

907

pr_err("ubi: refuse attaching mtd%d - zero erasesize flash is not supported\n",

drivers/mtd/ubi/build.c

918

pr_err("ubi: only %d UBI devices may be created\n",

drivers/mtd/ubi/build.c

928

pr_err("ubi: ubi%i already exists\n", ubi_num);

drivers/mtd/ubi/debug.c

102

pr_err("Volume identifier header dump:\n");

drivers/mtd/ubi/debug.c

103

pr_err("\tmagic %08x\n", be32_to_cpu(vid_hdr->magic));

drivers/mtd/ubi/debug.c

104

pr_err("\tversion %d\n", (int)vid_hdr->version);

drivers/mtd/ubi/debug.c

105

pr_err("\tvol_type %d\n", (int)vid_hdr->vol_type);

drivers/mtd/ubi/debug.c

106

pr_err("\tcopy_flag %d\n", (int)vid_hdr->copy_flag);

drivers/mtd/ubi/debug.c

107

pr_err("\tcompat %d\n", (int)vid_hdr->compat);

drivers/mtd/ubi/debug.c

108

pr_err("\tvol_id %d\n", be32_to_cpu(vid_hdr->vol_id));

drivers/mtd/ubi/debug.c

109

pr_err("\tlnum %d\n", be32_to_cpu(vid_hdr->lnum));

drivers/mtd/ubi/debug.c

110

pr_err("\tdata_size %d\n", be32_to_cpu(vid_hdr->data_size));

drivers/mtd/ubi/debug.c

111

pr_err("\tused_ebs %d\n", be32_to_cpu(vid_hdr->used_ebs));

drivers/mtd/ubi/debug.c

112

pr_err("\tdata_pad %d\n", be32_to_cpu(vid_hdr->data_pad));

drivers/mtd/ubi/debug.c

113

pr_err("\tsqnum %llu\n",

drivers/mtd/ubi/debug.c

115

pr_err("\thdr_crc %08x\n", be32_to_cpu(vid_hdr->hdr_crc));

drivers/mtd/ubi/debug.c

116

pr_err("Volume identifier header hexdump:\n");

drivers/mtd/ubi/debug.c

127

pr_err("Volume information dump:\n");

drivers/mtd/ubi/debug.c

128

pr_err("\tvol_id %d\n", vol->vol_id);

drivers/mtd/ubi/debug.c

129

pr_err("\treserved_pebs %d\n", vol->reserved_pebs);

drivers/mtd/ubi/debug.c

130

pr_err("\talignment %d\n", vol->alignment);

drivers/mtd/ubi/debug.c

131

pr_err("\tdata_pad %d\n", vol->data_pad);

drivers/mtd/ubi/debug.c

132

pr_err("\tvol_type %d\n", vol->vol_type);

drivers/mtd/ubi/debug.c

133

pr_err("\tname_len %d\n", vol->name_len);

drivers/mtd/ubi/debug.c

134

pr_err("\tusable_leb_size %d\n", vol->usable_leb_size);

drivers/mtd/ubi/debug.c

135

pr_err("\tused_ebs %d\n", vol->used_ebs);

drivers/mtd/ubi/debug.c

136

pr_err("\tused_bytes %lld\n", vol->used_bytes);

drivers/mtd/ubi/debug.c

137

pr_err("\tlast_eb_bytes %d\n", vol->last_eb_bytes);

drivers/mtd/ubi/debug.c

138

pr_err("\tcorrupted %d\n", vol->corrupted);

drivers/mtd/ubi/debug.c

139

pr_err("\tupd_marker %d\n", vol->upd_marker);

drivers/mtd/ubi/debug.c

140

pr_err("\tskip_check %d\n", vol->skip_check);

drivers/mtd/ubi/debug.c

144

pr_err("\tname %s\n", vol->name);

drivers/mtd/ubi/debug.c

146

pr_err("\t1st 5 characters of name: %c%c%c%c%c\n",

drivers/mtd/ubi/debug.c

161

pr_err("Volume table record %d dump:\n", idx);

drivers/mtd/ubi/debug.c

162

pr_err("\treserved_pebs %d\n", be32_to_cpu(r->reserved_pebs));

drivers/mtd/ubi/debug.c

163

pr_err("\talignment %d\n", be32_to_cpu(r->alignment));

drivers/mtd/ubi/debug.c

164

pr_err("\tdata_pad %d\n", be32_to_cpu(r->data_pad));

drivers/mtd/ubi/debug.c

165

pr_err("\tvol_type %d\n", (int)r->vol_type);

drivers/mtd/ubi/debug.c

166

pr_err("\tupd_marker %d\n", (int)r->upd_marker);

drivers/mtd/ubi/debug.c

167

pr_err("\tname_len %d\n", name_len);

drivers/mtd/ubi/debug.c

170

pr_err("\tname NULL\n");

drivers/mtd/ubi/debug.c

176

pr_err("\tname %s\n", &r->name[0]);

drivers/mtd/ubi/debug.c

178

pr_err("\t1st 5 characters of name: %c%c%c%c%c\n",

drivers/mtd/ubi/debug.c

182

pr_err("\tcrc %#08x\n", be32_to_cpu(r->crc));

drivers/mtd/ubi/debug.c

191

pr_err("Volume attaching information dump:\n");

drivers/mtd/ubi/debug.c

192

pr_err("\tvol_id %d\n", av->vol_id);

drivers/mtd/ubi/debug.c

193

pr_err("\thighest_lnum %d\n", av->highest_lnum);

drivers/mtd/ubi/debug.c

194

pr_err("\tleb_count %d\n", av->leb_count);

drivers/mtd/ubi/debug.c

195

pr_err("\tcompat %d\n", av->compat);

drivers/mtd/ubi/debug.c

196

pr_err("\tvol_type %d\n", av->vol_type);

drivers/mtd/ubi/debug.c

197

pr_err("\tused_ebs %d\n", av->used_ebs);

drivers/mtd/ubi/debug.c

198

pr_err("\tlast_data_size %d\n", av->last_data_size);

drivers/mtd/ubi/debug.c

199

pr_err("\tdata_pad %d\n", av->data_pad);

drivers/mtd/ubi/debug.c

209

pr_err("eraseblock attaching information dump:\n");

drivers/mtd/ubi/debug.c

210

pr_err("\tec %d\n", aeb->ec);

drivers/mtd/ubi/debug.c

211

pr_err("\tpnum %d\n", aeb->pnum);

drivers/mtd/ubi/debug.c

213

pr_err("\tlnum %d\n", aeb->lnum);

drivers/mtd/ubi/debug.c

214

pr_err("\tscrub %d\n", aeb->scrub);

drivers/mtd/ubi/debug.c

215

pr_err("\tsqnum %llu\n", aeb->sqnum);

drivers/mtd/ubi/debug.c

227

pr_err("Volume creation request dump:\n");

drivers/mtd/ubi/debug.c

228

pr_err("\tvol_id %d\n", req->vol_id);

drivers/mtd/ubi/debug.c

229

pr_err("\talignment %d\n", req->alignment);

drivers/mtd/ubi/debug.c

230

pr_err("\tbytes %lld\n", (long long)req->bytes);

drivers/mtd/ubi/debug.c

231

pr_err("\tvol_type %d\n", req->vol_type);

drivers/mtd/ubi/debug.c

232

pr_err("\tname_len %d\n", req->name_len);

drivers/mtd/ubi/debug.c

236

pr_err("\t1st 16 characters of name: %s\n", nm);

drivers/mtd/ubi/debug.c

306

pr_err("UBI error: cannot create \"ubi\" debugfs directory, error %d\n",

drivers/mtd/ubi/debug.c

83

pr_err("Erase counter header dump:\n");

drivers/mtd/ubi/debug.c

84

pr_err("\tmagic %#08x\n", be32_to_cpu(ec_hdr->magic));

drivers/mtd/ubi/debug.c

85

pr_err("\tversion %d\n", (int)ec_hdr->version);

drivers/mtd/ubi/debug.c

86

pr_err("\tec %llu\n", (long long)be64_to_cpu(ec_hdr->ec));

drivers/mtd/ubi/debug.c

87

pr_err("\tvid_hdr_offset %d\n", be32_to_cpu(ec_hdr->vid_hdr_offset));

drivers/mtd/ubi/debug.c

88

pr_err("\tdata_offset %d\n", be32_to_cpu(ec_hdr->data_offset));

drivers/mtd/ubi/debug.c

89

pr_err("\timage_seq %d\n", be32_to_cpu(ec_hdr->image_seq));

drivers/mtd/ubi/debug.c

90

pr_err("\thdr_crc %#08x\n", be32_to_cpu(ec_hdr->hdr_crc));

drivers/mtd/ubi/debug.c

91

pr_err("erase counter header hexdump:\n");

drivers/mtd/ubi/gluebi.c

31

pr_err("gluebi (pid %d): %s: " fmt "\n", \

drivers/mtd/ubi/misc.c

188

pr_err(UBI_NAME_STR "%d error: %ps: %pV\n",

drivers/mux/core.c

117

pr_err("muxchipX failed to get a device id\n");

drivers/net/amt.c

3434

pr_err("error loading AMT module loaded\n");

drivers/net/arcnet/arc-rimi.c

367

pr_err("Too many arguments\n");

drivers/net/arcnet/arc-rimi.c

78

pr_err("No autoprobe for RIM I; you must specify the shmem and irq!\n");

drivers/net/arcnet/arc-rimi.c

83

pr_err("You need to specify your card's station ID!\n");

drivers/net/arcnet/com20020-pci.c

159

pr_err("IO region %xh-%xh already allocated.\n",

drivers/net/arcnet/com20020-pci.c

188

pr_err("IO region %xh-%xh already allocated\n",

drivers/net/arcnet/com20020-pci.c

228

pr_err("IO address %Xh is empty!\n", ioaddr);

drivers/net/arcnet/com90io.c

366

pr_err("Too many arguments\n");

drivers/net/arcnet/com90xx.c

697

pr_err("Too many arguments\n");

drivers/net/bonding/bond_alb.c

1702

pr_err("Failed to build slave-array for TLB mode.\n");

drivers/net/bonding/bond_main.c

6095

pr_err("Error: Invalid bonding mode \"%s\"\n", mode);

drivers/net/bonding/bond_main.c

6112

pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",

drivers/net/bonding/bond_main.c

6129

pr_err("Error: Invalid lacp rate \"%s\"\n",

drivers/net/bonding/bond_main.c

6142

pr_err("Error: Invalid ad_select \"%s\"\n", ad_select);

drivers/net/bonding/bond_main.c

6177

pr_err("Error: invalid use_carrier parameter (%d)\n",

drivers/net/bonding/bond_main.c

6293

pr_err("arp_validate requires arp_interval\n");

drivers/net/bonding/bond_main.c

6301

pr_err("Error: invalid arp_validate \"%s\"\n",

drivers/net/bonding/bond_main.c

6315

pr_err("Error: invalid arp_all_targets_value \"%s\"\n",

drivers/net/bonding/bond_main.c

6357

pr_err("Error: Invalid primary_reselect \"%s\"\n",

drivers/net/bonding/bond_main.c

6371

pr_err("Error: invalid fail_over_mac \"%s\"\n",

drivers/net/bonding/bond_main.c

6387

pr_err("Error: No ad_actor_sys_prio default value");

drivers/net/bonding/bond_main.c

6395

pr_err("Error: No ad_user_port_key default value");

drivers/net/bonding/bond_main.c

6403

pr_err("Error: No tlb_dynamic_lb default value");

drivers/net/bonding/bond_sysfs.c

113

pr_err("unable to delete non-existent %s\n", ifname);

drivers/net/bonding/bond_sysfs.c

126

pr_err("no command found in bonding_masters - use +ifname or -ifname\n");

drivers/net/bonding/bond_sysfs.c

826

pr_err("network device named %s already exists in sysfs\n",

drivers/net/caif/caif_serial.c

425

pr_err("cannot register CAIF ldisc=%d err=%d\n", N_CAIF, ret);

drivers/net/can/can327.c

1123

pr_err("Can't register line discipline\n");

drivers/net/can/cc770/cc770_isa.c

337

pr_err("insufficient parameters supplied\n");

drivers/net/can/sja1000/sja1000_isa.c

275

pr_err("%s: insufficient parameters supplied\n",

drivers/net/can/slcan/slcan-core.c

860

pr_err("can't register candev\n");

drivers/net/can/slcan/slcan-core.c

940

pr_err("can't register line discipline\n");

drivers/net/can/usb/peak_usb/pcan_usb_core.c

1111

pr_err("%s: usb_register failed (err %d)\n",

drivers/net/can/usb/peak_usb/pcan_usb_core.c

1142

pr_err("%s: failed to stop all can devices (err %d)\n",

drivers/net/can/usb/peak_usb/pcan_usb_pro.c

183

pr_err("%s: %s(): unknown data type %02Xh (%d)\n",

drivers/net/dsa/bcm_sf2.c

1459

pr_err("unable to find register: %s\n", reg_names[i]);

drivers/net/dsa/bcm_sf2.c

1485

pr_err("unable to software reset switch: %d\n", ret);

drivers/net/dsa/bcm_sf2.c

1495

pr_err("failed to register MDIO bus\n");

drivers/net/dsa/bcm_sf2.c

1503

pr_err("failed to reset CFP\n");

drivers/net/dsa/bcm_sf2.c

1513

pr_err("failed to request switch_0 IRQ\n");

drivers/net/dsa/bcm_sf2.c

1520

pr_err("failed to request switch_1 IRQ\n");

drivers/net/dsa/bcm_sf2.c

982

pr_err("%s: failed to software reset switch\n", __func__);

drivers/net/dsa/bcm_sf2_cfp.c

246

pr_err("Policer entry at %d failed\n", rule_index);

drivers/net/dsa/bcm_sf2_cfp.c

256

pr_err("Meter entry at %d failed\n", rule_index);

drivers/net/dsa/bcm_sf2_cfp.c

455

pr_err("TCAM entry at addr %d failed\n", rule_index);

drivers/net/dsa/bcm_sf2_cfp.c

757

pr_err("TCAM entry at addr %d failed\n", rule_index[0]);

drivers/net/dsa/bcm_sf2_cfp.c

813

pr_err("TCAM entry at addr %d failed\n", rule_index[1]);

drivers/net/dsa/mv88e6xxx/hwtstamp.c

271

pr_err("failed to get the receive time stamp\n");

drivers/net/dsa/mv88e6xxx/hwtstamp.c

283

pr_err("failed to clear the receive status\n");

drivers/net/dsa/sja1105/sja1105_static_config.c

26

pr_err("Start bit (%d) expected to be larger than end (%d)\n",

drivers/net/dsa/sja1105/sja1105_static_config.c

29

pr_err("Field %d-%d too large for 64 bits!\n",

drivers/net/dsa/sja1105/sja1105_static_config.c

44

pr_err("Start bit (%d) expected to be larger than end (%d)\n",

drivers/net/dsa/sja1105/sja1105_static_config.c

47

pr_err("Field %d-%d too large for 64 bits!\n",

drivers/net/dsa/sja1105/sja1105_static_config.c

61

pr_err("Start bit (%d) expected to be larger than end (%d)\n",

drivers/net/dsa/sja1105/sja1105_static_config.c

65

pr_err("Field %d-%d too large for 64 bits!\n",

drivers/net/dsa/sja1105/sja1105_static_config.c

68

pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n",

drivers/net/ethernet/3com/3c509.c

1406

pr_err("No I/O port available for 3c509 activation.\n");

drivers/net/ethernet/3com/3c509.c

535

pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",

drivers/net/ethernet/3com/3c509.c

825

pr_err("%s: Infinite loop in interrupt, status %4.4x.\n",

drivers/net/ethernet/3com/3c515.c

1138

pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",

drivers/net/ethernet/3com/3c515.c

1234

pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n",

drivers/net/ethernet/3com/3c59x.c

1296

pr_err("*** EEPROM MAC address is invalid.\n");

drivers/net/ethernet/3com/3c59x.c

1482

pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval);

drivers/net/ethernet/3com/3c59x.c

1510

pr_err("%s: command 0x%04x did not complete! Status=0x%x\n",

drivers/net/ethernet/3com/3c59x.c

1729

pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);

drivers/net/ethernet/3com/3c59x.c

1778

pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval);

drivers/net/ethernet/3com/3c59x.c

1887

pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",

drivers/net/ethernet/3com/3c59x.c

1890

pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n",

drivers/net/ethernet/3com/3c59x.c

1897

pr_err("%s: Transmitter encountered 16 collisions --"

drivers/net/ethernet/3com/3c59x.c

1900

pr_err("%s: Interrupt posted but not delivered --"

drivers/net/ethernet/3com/3c59x.c

1947

pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status);

drivers/net/ethernet/3com/3c59x.c

1955

pr_err("%s: Transmit error, Tx status register %2.2x.\n",

drivers/net/ethernet/3com/3c59x.c

1958

pr_err("Probably a duplex mismatch. See "

drivers/net/ethernet/3com/3c59x.c

2005

pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n",

drivers/net/ethernet/3com/3c59x.c

2013

pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);

drivers/net/ethernet/3com/3c59x.c

2798

pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",

drivers/net/ethernet/3com/3c59x.c

2802

pr_err(" Transmit list %8.8x vs. %p.\n",

drivers/net/ethernet/3com/3c59x.c

2814

pr_err(" %d: @%p length %8.8x status %8.8x\n",

drivers/net/ethernet/3com/3c59x.c

3262

pr_err("vortex_remove_one called for Compaq device!\n");

drivers/net/ethernet/3com/3c59x.c

937

pr_err("vortex_eisa_remove called for Compaq device!\n");

drivers/net/ethernet/3com/typhoon.c

2541

pr_err("%s: %s\n", pci_name(pdev), err_msg);

drivers/net/ethernet/8390/lib8390.c

595

pr_err("%s: bogus last_tx_buffer %d, tx1=%d\n",

drivers/net/ethernet/8390/lib8390.c

610

pr_err("%s: bogus last_tx_buffer %d, tx2=%d\n",

drivers/net/ethernet/8390/mac8390.c

619

pr_err("%s: unable to get IRQ %d\n", dev->name, dev->irq);

drivers/net/ethernet/altera/altera_tse_main.c

510

pr_err("%s: invalid dev pointer\n", __func__);

drivers/net/ethernet/amazon/ena/ena_netdev.c

4267

pr_err("Failed to create workqueue\n");

drivers/net/ethernet/amd/a2065.c

230

pr_err("unopened after %d ticks, csr0=%04x\n", i, ll->rdp);

drivers/net/ethernet/amd/au1000_eth.c

801

pr_err("rx_error(s):");

drivers/net/ethernet/amd/nmclan_cs.c

544

pr_err("reset failed, card removed?\n");

drivers/net/ethernet/amd/nmclan_cs.c

591

pr_err("ADDRCHG timeout, card removed?\n");

drivers/net/ethernet/amd/pcnet32.c

1540

pr_err("failed to enable device -- err=%d\n", err);

drivers/net/ethernet/amd/pcnet32.c

1547

pr_err("card has no PCI IO resources, aborting\n");

drivers/net/ethernet/amd/pcnet32.c

1555

pr_err("architecture does not support 32bit PCI busmaster DMA\n");

drivers/net/ethernet/amd/pcnet32.c

1562

pr_err("io address range already allocated\n");

drivers/net/ethernet/amd/pcnet32.c

1622

pr_err("No access methods\n");

drivers/net/ethernet/amd/pcnet32.c

1848

pr_err("Coherent memory allocation failed\n");

drivers/net/ethernet/amd/pcnet32.c

2461

pr_err("%s: transmit timed out, status %4.4x, resetting\n",

drivers/net/ethernet/aquantia/atlantic/aq_hw_utils.h

26

#define aq_pr_err(...) pr_err(AQ_CFG_DRV_NAME ": " __VA_ARGS__)

drivers/net/ethernet/aquantia/atlantic/aq_main.c

481

pr_err("Failed to create workqueue\n");

drivers/net/ethernet/arc/emac_rockchip.c

51

pr_err("speed %u not supported\n", speed);

drivers/net/ethernet/arc/emac_rockchip.c

57

pr_err("unable to apply speed %u to grf (%d)\n", speed, err);

drivers/net/ethernet/asix/ax88796c_main.c

1150

pr_err("Invalid bitmap description, masking all registers\n");

drivers/net/ethernet/asix/ax88796c_main.c

592

pr_err("irq %d for unknown device.\n", irq);

drivers/net/ethernet/broadcom/b44.c

2165

pr_err("Invalid MAC address found in EEPROM\n");

drivers/net/ethernet/broadcom/bnx2.c

2553

pr_err("fw sync timeout, reset code = %x\n", msg_data);

drivers/net/ethernet/broadcom/bnx2.c

3715

pr_err("Can't load firmware file \"%s\"\n", mips_fw_file);

drivers/net/ethernet/broadcom/bnx2.c

3721

pr_err("Can't load firmware file \"%s\"\n", rv2p_fw_file);

drivers/net/ethernet/broadcom/bnx2.c

3732

pr_err("Firmware file \"%s\" is invalid\n", mips_fw_file);

drivers/net/ethernet/broadcom/bnx2.c

3739

pr_err("Firmware file \"%s\" is invalid\n", rv2p_fw_file);

drivers/net/ethernet/broadcom/bnx2.c

4836

pr_err("Chip reset did not complete\n");

drivers/net/ethernet/broadcom/bnx2.c

4844

pr_err("Chip not in correct endian mode\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

119

pr_err("[%s:%d(%s)]" fmt, \

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

128

pr_err("[%s:%d(%s)]" fmt, \

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

135

pr_err("[%s:%d]" fmt, __func__, __LINE__, ##__VA_ARGS__)

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

13077

pr_err("PCI device error, probably due to fan failure, aborting\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

13604

pr_err("Unknown board_type (%d), aborting\n", chip_id);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

14361

pr_err("Cannot create workqueue\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

14366

pr_err("Cannot create iov workqueue\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

14373

pr_err("Cannot register driver\n");

drivers/net/ethernet/broadcom/cnic.c

479

pr_err("%s: Bad type %d\n", __func__, ulp_type);

drivers/net/ethernet/broadcom/cnic.c

484

pr_err("%s: Type %d has already been registered\n",

drivers/net/ethernet/broadcom/cnic.c

522

pr_err("%s: Bad type %d\n", __func__, ulp_type);

drivers/net/ethernet/broadcom/cnic.c

528

pr_err("%s: Type %d has not been registered\n",

drivers/net/ethernet/broadcom/cnic.c

537

pr_err("%s: Type %d still has devices registered\n",

drivers/net/ethernet/broadcom/cnic.c

574

pr_err("%s: Bad type %d\n", __func__, ulp_type);

drivers/net/ethernet/broadcom/cnic.c

579

pr_err("%s: Driver with type %d has not been registered\n",

drivers/net/ethernet/broadcom/cnic.c

585

pr_err("%s: Type %d has already been registered to this device\n",

drivers/net/ethernet/broadcom/cnic.c

616

pr_err("%s: Bad type %d\n", __func__, ulp_type);

drivers/net/ethernet/broadcom/cnic.c

628

pr_err("%s: device not registered to this ulp type %d\n",

drivers/net/ethernet/broadcom/genet/bcmmii.c

354

pr_err("could not attach to PHY\n");

drivers/net/ethernet/broadcom/genet/bcmmii.c

367

pr_err("Unable to find mii\n");

drivers/net/ethernet/broadcom/genet/bcmmii.c

373

pr_err("Unable to find PHY\n");

drivers/net/ethernet/broadcom/genet/bcmmii.c

384

pr_err("could not attach to PHY\n");

drivers/net/ethernet/brocade/bna/bnad.c

3828

pr_err("bna: PCI driver registration failed err=%d\n", err);

drivers/net/ethernet/brocade/bna/cna.h

27

pr_err("SM Assertion failure: %s: %d: event = %d\n", \

drivers/net/ethernet/cadence/macb_ptp.c

339

pr_err("ptp clock register failed: %ld\n",

drivers/net/ethernet/cadence/macb_ptp.c

344

pr_err("ptp clock register failed\n");

drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c

660

pr_err("netdev notifier registration failed\n");

drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c

671

pr_err("netdev notifier unregister failed\n");

drivers/net/ethernet/cavium/liquidio/octeon_device.c

688

pr_err("%s: Unknown PCI Device: 0x%x\n",

drivers/net/ethernet/cavium/liquidio/octeon_network.h

459

pr_err("%s: pg_info->page NULL\n", __func__);

drivers/net/ethernet/cavium/liquidio/octeon_network.h

466

pr_err("%s: ERROR it should be already available\n",

drivers/net/ethernet/cavium/thunder/thunder_xcv.c

116

pr_err("XCV init not done, probe may have failed\n");

drivers/net/ethernet/chelsio/cxgb/cxgb2.c

1000

pr_err("%s: cannot map device registers\n",

drivers/net/ethernet/chelsio/cxgb/cxgb2.c

1106

pr_err("%s: could not register any net devices\n",

drivers/net/ethernet/chelsio/cxgb/cxgb2.c

958

pr_err("%s: cannot find PCI device memory base address\n",

drivers/net/ethernet/chelsio/cxgb/cxgb2.c

966

pr_err("%s: no usable DMA configuration\n", pci_name(pdev));

drivers/net/ethernet/chelsio/cxgb/cxgb2.c

972

pr_err("%s: cannot obtain PCI resources\n", pci_name(pdev));

drivers/net/ethernet/chelsio/cxgb/espi.c

69

pr_err("%s: TRICN write timed out\n", adapter->name);

drivers/net/ethernet/chelsio/cxgb/espi.c

79

pr_err("%s: ESPI clock not ready\n", adapter->name);

drivers/net/ethernet/chelsio/cxgb/sge.c

1098

pr_err("%s: unexpected offload packet, cmd %u\n",

drivers/net/ethernet/chelsio/cxgb/sge.c

1719

pr_err("%s: Tx ring full while queue awake!\n",

drivers/net/ethernet/chelsio/cxgb/subr.c

1078

pr_err("%s: SGE initialization failed\n",

drivers/net/ethernet/chelsio/cxgb/subr.c

1084

pr_err("%s: ESPI initialization failed\n",

drivers/net/ethernet/chelsio/cxgb/subr.c

1091

pr_err("%s: TP initialization failed\n",

drivers/net/ethernet/chelsio/cxgb/subr.c

1111

pr_err("%s: PHY %d initialization failed\n",

drivers/net/ethernet/chelsio/cxgb/subr.c

1118

pr_err("%s: MAC %d initialization failed\n",

drivers/net/ethernet/chelsio/cxgb/subr.c

1130

pr_err("%s: could not read MAC address from VPD ROM\n",

drivers/net/ethernet/chelsio/cxgb/subr.c

581

pr_err("%s: reading EEPROM address 0x%x failed\n",

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

227

pr_err("sleep %d us\n",ib[i].data);

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

243

pr_err("No bist address: 0x%x\n", address);

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

253

pr_err("Still in bist read: 0x%x\n", result);

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

255

pr_err("bist read error: 0x%x\n", result);

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

270

pr_err("No bist address: 0x%x\n", address);

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

273

pr_err("Suspicious write out of range value: 0x%x\n", value);

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

283

pr_err("Still in bist write: 0x%x\n", result);

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

285

pr_err("bist write error: 0x%x\n", result);

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

308

pr_err("Result: 0x%x BIST error in ram %d, column: 0x%04x\n",

drivers/net/ethernet/chelsio/cxgb/vsc7326.c

50

pr_err("Invalid tpi read from MAC, breaking loop.\n");

drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c

3214

pr_err("cannot initialize work queue\n");

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

1056

pr_err("%s: cannot allocate skb!\n", __func__);

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

1093

pr_err("%s: couldn't allocate new l2t entry!\n", __func__);

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

672

pr_err("Unexpected SMT_WRITE_RPL status %u for entry %u\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

683

pr_err("Unexpected L2T_WRITE_RPL status %u for entry %u\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

694

pr_err("Unexpected RTE_WRITE_RPL status %u for entry %u\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

714

pr_err("%s: received clientless CPL command 0x%x\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

732

pr_err("%s: received clientless CPL command 0x%x\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

750

pr_err("%s: received clientless CPL command 0x%x\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

777

pr_err("%s: received clientless CPL command 0x%x\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

871

pr_err("%s: received clientless CPL command 0x%x\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

917

pr_err("%s: received clientless CPL command 0x%x\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

953

pr_err("%s: received bad CPL command 0x%x\n", dev->name, *skb->data);

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

971

pr_err("T3C: handler registration for opcode %x failed\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c

991

pr_err("%s: CPL message (opcode %u) had unknown TID %u\n",

drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c

1633

pr_err("%s: IPv6 filter requires 2 indices. IPv4 filter already present at %d. Please remove IPv4 filter first.\n",

drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c

1960

pr_err("%s: Invalid NAT mode: %d\n",

drivers/net/ethernet/chelsio/inline_crypto/ch_ipsec/chcr_ipsec.c

188

pr_err("GCM: Invalid key length %d\n", keylen);

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

129

pr_err("GCM: cipher type 0x%x not supported\n",

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

2153

pr_err("Unsupported opcode %d received\n", opcode);

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

435

pr_err("not expecting for RX direction\n");

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

496

pr_err("DST entry not found\n");

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

501

pr_err("neighbour not found\n");

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

511

pr_err("l2t entry not found\n");

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

661

pr_err("%s: incorrect tx_info or atid\n", __func__);

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

691

pr_err("%s: Failed to allocate tid XA entry = %d\n",

drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c

724

pr_err("%s: incorrect tx_info or tid\n", __func__);

drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c

1736

pr_err("can't find conn. for hwtid %u.\n", hwtid);

drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c

1788

pr_err("can't find conn. for hwtid %u.\n", hwtid);

drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c

1857

pr_err("can't find conn. for hwtid %u.\n", hwtid);

drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c

2292

pr_err("can't find conn. for hwtid %u.\n", hwtid);

drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_hw.c

287

pr_err("GCM: Invalid key length %d\n", keylen);

drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c

407

pr_err("iscsi ppod region not contiguous: EDRAM start 0x%x "

drivers/net/ethernet/cirrus/cs89x0.c

1017

pr_err("%s: no media detected\n", dev->name);

drivers/net/ethernet/cirrus/cs89x0.c

1022

pr_err("%s: no network cable attached to configured media\n",

drivers/net/ethernet/cirrus/cs89x0.c

1534

pr_err("invalid ISA interrupt number %d\n", i);

drivers/net/ethernet/cirrus/cs89x0.c

1622

pr_err("%s: bad signature 0x%x\n",

drivers/net/ethernet/cirrus/cs89x0.c

1803

pr_err("Module autoprobing not allowed\n");

drivers/net/ethernet/cirrus/cs89x0.c

1804

pr_err("Append io=0xNNN\n");

drivers/net/ethernet/cirrus/cs89x0.c

1814

pr_err("dma size must be either 16K or 64K, not %dK\n",

drivers/net/ethernet/cirrus/cs89x0.c

625

pr_err("**** Full / half duplex auto-negotiation timed out ****\n");

drivers/net/ethernet/cirrus/cs89x0.c

858

pr_err("can't get an interrupt\n");

drivers/net/ethernet/cirrus/cs89x0.c

865

pr_err("%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",

drivers/net/ethernet/cirrus/cs89x0.c

880

pr_err("request_irq(%d) failed\n", dev->irq);

drivers/net/ethernet/cirrus/cs89x0.c

891

pr_err("%s: cannot get %dK memory for DMA\n",

drivers/net/ethernet/cirrus/cs89x0.c

902

pr_err("%s: not usable as DMA buffer\n", dev->name);

drivers/net/ethernet/cirrus/cs89x0.c

907

pr_err("%s: cannot get dma channel %d\n",

drivers/net/ethernet/cirrus/cs89x0.c

958

pr_err("%s: EEPROM is configured for unavailable media\n",

drivers/net/ethernet/dec/tulip/de2104x.c

2023

pr_err("invalid irq (%d) for pci dev %s\n",

drivers/net/ethernet/dec/tulip/de2104x.c

2032

pr_err("no MMIO resource for pci dev %s\n", pci_name(pdev));

drivers/net/ethernet/dec/tulip/de2104x.c

2037

pr_err("MMIO resource (%llx) too small on pci dev %s\n",

drivers/net/ethernet/dec/tulip/de2104x.c

2047

pr_err("Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",

drivers/net/ethernet/dec/tulip/de2104x.c

2059

pr_err("Cannot reset MAC, pci dev %s\n", pci_name(pdev));

drivers/net/ethernet/dec/tulip/dmfe.c

152

pr_err("%s %lx\n", \

drivers/net/ethernet/dec/tulip/dmfe.c

395

pr_err("I/O base is zero\n");

drivers/net/ethernet/dec/tulip/dmfe.c

401

pr_err("Allocated I/O size too small\n");

drivers/net/ethernet/dec/tulip/dmfe.c

416

pr_err("Failed to request PCI regions\n");

drivers/net/ethernet/dec/tulip/dmfe.c

678

pr_err("big packet = %d\n", (u16)skb->len);

drivers/net/ethernet/dec/tulip/dmfe.c

691

pr_err("No Tx resource %ld\n", db->tx_queue_cnt);

drivers/net/ethernet/dec/tulip/tulip_core.c

1317

pr_err("skipping LMC card\n");

drivers/net/ethernet/dec/tulip/tulip_core.c

1323

pr_err("skipping SBE T3E3 port\n");

drivers/net/ethernet/dec/tulip/tulip_core.c

1392

pr_err("Cannot enable tulip board #%d, aborting\n", board_idx);

drivers/net/ethernet/dec/tulip/tulip_core.c

1405

pr_err("%s: I/O region (0x%llx@0x%llx) too small, aborting\n",

drivers/net/ethernet/dec/tulip/tulip_core.c

1843

pr_err("request_irq failed in resume\n");

drivers/net/ethernet/dec/tulip/uli526x.c

298

pr_err("I/O base is zero\n");

drivers/net/ethernet/dec/tulip/uli526x.c

304

pr_err("Allocated I/O size too small\n");

drivers/net/ethernet/dec/tulip/uli526x.c

311

pr_err("Failed to request PCI regions\n");

drivers/net/ethernet/dec/tulip/uli526x.c

81

pr_err("%s %lx\n", (msg), (long) (value)); \

drivers/net/ethernet/dec/tulip/uli526x.c

85

pr_err("Change Speed to %sMhz %s duplex\n", \

drivers/net/ethernet/dec/tulip/xircom_cb.c

1152

pr_err("Major transmit error status %x\n", status);

drivers/net/ethernet/dec/tulip/xircom_cb.c

217

pr_err("%s: failed to allocate io-region\n", __func__);

drivers/net/ethernet/dec/tulip/xircom_cb.c

268

pr_err("%s: netdevice registration failed\n", __func__);

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

1261

pr_err("%s: fman_port_config failed\n", __func__);

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

1267

pr_err("%s: fman_port_cfg_buf_prefix_content failed\n",

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

1274

pr_err("%s: fm_port_init failed\n", __func__);

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

1312

pr_err("%s: fman_port_config failed\n", __func__);

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

1318

pr_err("%s: fman_port_cfg_buf_prefix_content failed\n",

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

1325

pr_err("%s: fm_port_init failed\n", __func__);

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

3240

pr_err("Error %d allocating CGR ID\n", err);

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

3261

pr_err("Error %d creating ingress CGR with ID %d\n",

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

3610

pr_err("Error, platform_driver_register() = %d\n", err);

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

545

pr_err("%s: Buffer pool is not properly initialized! Missing size or initial number of buffers\n",

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

558

pr_err("%s: bman_new_pool() failed\n",

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

577

pr_err("%s: pool seeding failed\n", __func__);

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

857

pr_err("%s: Error %d allocating CGR ID\n",

drivers/net/ethernet/freescale/dpaa/dpaa_eth.c

886

pr_err("%s: Error %d creating CGR with ID %d\n",

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c

3539

pr_err("dpaa2-switch: failed to register net_device notifier (%d)\n", err);

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c

3545

pr_err("dpaa2-switch: failed to register switchdev notifier (%d)\n", err);

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c

3551

pr_err("dpaa2-switch: failed to register switchdev blocking notifier (%d)\n", err);

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c

3571

pr_err("dpaa2-switch: failed to unregister switchdev blocking notifier (%d)\n",

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c

3576

pr_err("dpaa2-switch: failed to unregister switchdev notifier (%d)\n", err);

drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c

3580

pr_err("dpaa2-switch: failed to unregister net_device notifier (%d)\n", err);

drivers/net/ethernet/freescale/fec_mpc52xx.c

833

pr_err("Error while parsing device node resource\n");

drivers/net/ethernet/freescale/fec_mpc52xx.c

837

pr_err("invalid resource size (%lx < %x), check mpc52xx_devices.c\n",

drivers/net/ethernet/freescale/fec_mpc52xx.c

875

pr_err("Can not init SDMA tasks\n");

drivers/net/ethernet/freescale/fman/fman.c

1168

pr_err("Unsupported FManv3 version\n");

drivers/net/ethernet/freescale/fman/fman.c

1174

pr_err("Unsupported FMan version\n");

drivers/net/ethernet/freescale/fman/fman.c

2900

pr_err("Error, platform_driver_register() = %d\n", err);

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1028

pr_err("Could not compute hash bucket\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1131

pr_err("Could not compute hash bucket\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1222

pr_err("Undefined exception\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1233

pr_err("Exception valid for 1588 only\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1251

pr_err("Undefined exception\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1268

pr_err("Can't reset MAC!\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1283

pr_err("DTSEC version doesn't support this i/f mode\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1298

pr_err("Setting max frame length failed\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1307

pr_err("MC hash table is failed\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

1314

pr_err("UC hash table is failed\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

481

pr_err("packetAlignmentPadding can't be > than %d\n",

drivers/net/ethernet/freescale/fman/fman_dtsec.c

491

pr_err("Inter packet gap can't be greater than %d\n",

drivers/net/ethernet/freescale/fman/fman_dtsec.c

497

pr_err("maxRetransmission can't be greater than %d\n",

drivers/net/ethernet/freescale/fman/fman_dtsec.c

503

pr_err("collisionWindow can't be greater than %d\n",

drivers/net/ethernet/freescale/fman/fman_dtsec.c

511

pr_err("uninitialized exception_cb\n");

drivers/net/ethernet/freescale/fman/fman_dtsec.c

515

pr_err("uninitialized event_cb\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

402

pr_err("Writing Action Register failed\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

470

pr_err("Requested Scheme does not exist\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

474

pr_err("Cannot bind port to an invalid scheme\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

483

pr_err("Reading Action Register failed\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

492

pr_err("Writing Action Register failed\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

520

pr_err("Requested Scheme does not exist\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

524

pr_err("The requested Scheme is already used\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

605

pr_err("Writing scheme registers failed\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

697

pr_err("Base FQID must be between 1 and 2^24-1\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

701

pr_err("Hash size must be power of two\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

708

pr_err("The maximum number of available Schemes has been exceeded\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

716

pr_err("Requested Scheme does not exist\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

720

pr_err("The requested Scheme is already used\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

744

pr_err("Scheme setup failed\n");

drivers/net/ethernet/freescale/fman/fman_keygen.c

751

pr_err("Binding port to schemes failed\n");

drivers/net/ethernet/freescale/fman/fman_memac.c

1003

pr_err("mEMAC reset failed\n");

drivers/net/ethernet/freescale/fman/fman_memac.c

1034

pr_err("settings Mac max frame length is FAILED\n");

drivers/net/ethernet/freescale/fman/fman_memac.c

1041

pr_err("allocation hash table is FAILED\n");

drivers/net/ethernet/freescale/fman/fman_memac.c

1048

pr_err("allocation hash table is FAILED\n");

drivers/net/ethernet/freescale/fman/fman_memac.c

424

pr_err("Uninitialized exception handler\n");

drivers/net/ethernet/freescale/fman/fman_memac.c

808

pr_err("Unicast Address\n");

drivers/net/ethernet/freescale/fman/fman_memac.c

895

pr_err("Undefined exception\n");

drivers/net/ethernet/freescale/fman/fman_muram.c

49

pr_err("%s(): MURAM pool create failed\n", __func__);

drivers/net/ethernet/freescale/fman/fman_muram.c

55

pr_err("%s(): MURAM ioremap failed\n", __func__);

drivers/net/ethernet/freescale/fman/fman_muram.c

62

pr_err("%s(): MURAM pool add failed\n", __func__);

drivers/net/ethernet/freescale/fman/fman_port.c

1908

pr_err("Error, platform_driver_register() = %d\n", err);

drivers/net/ethernet/freescale/fman/fman_port.c

678

pr_err("Timeout stopping HW Parser\n");

drivers/net/ethernet/freescale/fman/fman_port.c

692

pr_err("Timeout starting HW Parser\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

248

pr_err("uninitialized exception_cb\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

252

pr_err("uninitialized event_cb\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

498

pr_err("Unicast Address\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

606

pr_err("Undefined exception\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

625

pr_err("Can't reset MAC!\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

649

pr_err("TGEC version doesn't support this i/f mode\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

657

pr_err("Setting max frame length FAILED\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

677

pr_err("allocation hash table is FAILED\n");

drivers/net/ethernet/freescale/fman/fman_tgec.c

684

pr_err("allocation hash table is FAILED\n");

drivers/net/ethernet/freescale/gianfar.c

3267

pr_err("%s: Cannot register net device, aborting\n", dev->name);

drivers/net/ethernet/freescale/gianfar.c

650

pr_err("Cannot do alloc_etherdev, aborting\n");

drivers/net/ethernet/freescale/gianfar.c

659

pr_err("num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n",

drivers/net/ethernet/freescale/gianfar.c

661

pr_err("Cannot do alloc_etherdev, aborting\n");

drivers/net/ethernet/freescale/gianfar.c

666

pr_err("num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",

drivers/net/ethernet/freescale/gianfar.c

668

pr_err("Cannot do alloc_etherdev, aborting\n");

drivers/net/ethernet/freescale/gianfar.c

696

pr_err("Device model property missing, aborting\n");

drivers/net/ethernet/freescale/ucc_geth.c

1372

pr_err("ucc_num out of range\n");

drivers/net/ethernet/freescale/ucc_geth.c

1401

pr_err("ucc_num out of range\n");

drivers/net/ethernet/freescale/ucc_geth.c

1938

pr_err("Rx BD ring length must be multiple of 4, no smaller than 8\n");

drivers/net/ethernet/freescale/ucc_geth.c

1947

pr_err("Tx BD ring length must be no smaller than 2\n");

drivers/net/ethernet/freescale/ucc_geth.c

1956

pr_err("max_rx_buf_length must be non-zero multiple of 128\n");

drivers/net/ethernet/freescale/ucc_geth.c

1963

pr_err("number of tx queues too large\n");

drivers/net/ethernet/freescale/ucc_geth.c

1970

pr_err("number of rx queues too large\n");

drivers/net/ethernet/freescale/ucc_geth.c

1978

pr_err("VLAN priority table entry must not be larger than number of Rx queues\n");

drivers/net/ethernet/freescale/ucc_geth.c

1987

pr_err("IP priority table entry must not be larger than number of Rx queues\n");

drivers/net/ethernet/freescale/ucc_geth.c

1994

pr_err("If cam mode is chosen, must supply cam ptr\n");

drivers/net/ethernet/freescale/ucc_geth.c

2002

pr_err("Number of station addresses greater than 1 not allowed in extended parsing mode\n");

drivers/net/ethernet/freescale/ucc_geth.c

2016

pr_err("Failed to init uccf\n");

drivers/net/ethernet/freescale/ucc_geth.c

2031

pr_err("Failed to ioremap regs\n");

drivers/net/ethernet/freescale/ucc_geth.c

2063

pr_err("Can not allocate memory for Tx bd rings\n");

drivers/net/ethernet/freescale/ucc_geth.c

2079

pr_err("Could not allocate tx_skbuff\n");

drivers/net/ethernet/freescale/ucc_geth.c

2123

pr_err("Can not allocate memory for Rx bd rings\n");

drivers/net/ethernet/freescale/ucc_geth.c

2137

pr_err("Could not allocate rx_skbuff\n");

drivers/net/ethernet/freescale/ucc_geth.c

2187

pr_err("Bad number of Rx threads value\n");

drivers/net/ethernet/freescale/ucc_geth.c

2194

pr_err("Bad number of Tx threads value\n");

drivers/net/ethernet/freescale/ucc_geth.c

2242

pr_err("IPGIFG initialization parameter too large\n");

drivers/net/ethernet/freescale/ucc_geth.c

2258

pr_err("Half Duplex initialization parameter too large\n");

drivers/net/ethernet/freescale/ucc_geth.c

2295

pr_err("Can not allocate DPRAM memory for p_tx_glbl_pram\n");

drivers/net/ethernet/freescale/ucc_geth.c

2310

pr_err("Can not allocate DPRAM memory for p_thread_data_tx\n");

drivers/net/ethernet/freescale/ucc_geth.c

2337

pr_err("Can not allocate DPRAM memory for p_send_q_mem_reg\n");

drivers/net/ethernet/freescale/ucc_geth.c

2368

pr_err("Can not allocate DPRAM memory for p_scheduler\n");

drivers/net/ethernet/freescale/ucc_geth.c

2413

pr_err("Can not allocate DPRAM memory for p_tx_fw_statistics_pram\n");

drivers/net/ethernet/freescale/ucc_geth.c

2445

pr_err("Can not allocate DPRAM memory for p_rx_glbl_pram\n");

drivers/net/ethernet/freescale/ucc_geth.c

2459

pr_err("Can not allocate DPRAM memory for p_thread_data_rx\n");

drivers/net/ethernet/freescale/ucc_geth.c

2480

pr_err("Can not allocate DPRAM memory for p_rx_fw_statistics_pram\n");

drivers/net/ethernet/freescale/ucc_geth.c

2497

pr_err("Can not allocate DPRAM memory for p_rx_irq_coalescing_tbl\n");

drivers/net/ethernet/freescale/ucc_geth.c

2563

pr_err("Can not allocate DPRAM memory for p_rx_bd_qs_tbl\n");

drivers/net/ethernet/freescale/ucc_geth.c

2626

pr_err("Null Extended Filtering Chain Pointer\n");

drivers/net/ethernet/freescale/ucc_geth.c

2637

pr_err("Can not allocate DPRAM memory for p_exf_glbl_param\n");

drivers/net/ethernet/freescale/ucc_geth.c

2682

pr_err("Can not allocate memory for p_UccInitEnetParamShadows\n");

drivers/net/ethernet/freescale/ucc_geth.c

2712

pr_err("Invalid largest External Lookup Key Size\n");

drivers/net/ethernet/freescale/ucc_geth.c

2737

pr_err("Can not fill p_init_enet_param_shadow\n");

drivers/net/ethernet/freescale/ucc_geth.c

2751

pr_err("Can not fill p_init_enet_param_shadow\n");

drivers/net/ethernet/freescale/ucc_geth.c

2759

pr_err("Can not fill Rx bds with buffers\n");

drivers/net/ethernet/freescale/ucc_geth.c

2768

pr_err("Can not allocate DPRAM memory for p_init_enet_pram\n");

drivers/net/ethernet/freescale/ucc_geth.c

2919

pr_err("%d: ERROR!!! skb - 0x%08x\n",

drivers/net/ethernet/freescale/ucc_geth.c

300

pr_err("Can not get SNUM\n");

drivers/net/ethernet/freescale/ucc_geth.c

311

pr_err("Can not allocate DPRAM memory\n");

drivers/net/ethernet/freescale/ucc_geth.c

3401

pr_err("missing %s-clock-name property\n", buf);

drivers/net/ethernet/freescale/ucc_geth.c

3407

pr_err("invalid %s property\n", buf);

drivers/net/ethernet/freescale/ucc_geth.c

3587

pr_err("%s: Cannot register net device, aborting\n",

drivers/net/ethernet/hisilicon/hns/hnae.h

47

pr_err("Assertion failed! %s, %s, %s, line %d\n", \

drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c

709

pr_err("hns_ae_get_stats NULL handle or data pointer!\n");

drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c

120

pr_err("sfp_led_opt mac_dev is null!\n");

drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c

157

pr_err("cpld_led_set mac_cb is null!\n");

drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c

178

pr_err("cpld_led_reset mac_cb is null!\n");

drivers/net/ethernet/hisilicon/hns3/hnae3.c

198

pr_err("client %s does not exist!\n", client->name);

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

12920

pr_err("%s: failed to create workqueue\n", HCLGE_NAME);

drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c

3411

pr_err("%s: failed to create workqueue\n", HCLGEVF_NAME);

drivers/net/ethernet/ibm/ehea/ehea_main.c

1067

pr_err("no mem for cb4\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1118

pr_err("Failed sensing port speed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1127

pr_err("Failed setting port speed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1412

pr_err("Generating SMRS failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1465

pr_err("create_eq failed (eq)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1473

pr_err("create_cq failed (cq_recv)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1481

pr_err("create_cq failed (cq_send)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1493

pr_err("no mem for ehea_qp_init_attr\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1518

pr_err("create_qp failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1695

pr_err("%sregistering bc address failed (tagged)\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

1707

pr_err("%sregistering bc address failed (vlan)\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

1730

pr_err("no mem for cb0\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1781

pr_err("failed %sabling promiscuous mode\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

1796

pr_err("no mem for cb7\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1858

pr_err("failed deregistering mcast MAC\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

1915

pr_err("failed registering mcast MAC\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2100

pr_err("no mem for cb1\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2108

pr_err("query_ehea_port failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2119

pr_err("modify_ehea_port failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2138

pr_err("no mem for cb1\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2146

pr_err("query_ehea_port failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2157

pr_err("modify_ehea_port failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2182

pr_err("query_ehea_qp failed (1)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2191

pr_err("modify_ehea_qp failed (1)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2198

pr_err("query_ehea_qp failed (2)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2207

pr_err("modify_ehea_qp failed (2)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2214

pr_err("query_ehea_qp failed (3)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2223

pr_err("modify_ehea_qp failed (3)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2230

pr_err("query_ehea_qp failed (4)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2250

pr_err("ehea_create_eq failed (qp_eq)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2503

pr_err("WARNING: sq not flushed completely\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2539

pr_err("query_ehea_qp failed (1)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2551

pr_err("modify_ehea_qp failed (1)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2559

pr_err("query_ehea_qp failed (2)\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2566

pr_err("unreg shared memory region failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2751

pr_err("unregister MR failed - driver inoperable!\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2763

pr_err("register MR failed - driver inoperable!\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2842

pr_err("no mem for cb4\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

2903

pr_err("failed to register device. ret=%d\n", ret);

drivers/net/ethernet/ibm/ehea/ehea_main.c

2910

pr_err("failed to register attributes, ret=%d\n", ret);

drivers/net/ethernet/ibm/ehea/ehea_main.c

3020

pr_err("register_netdev failed. ret=%d\n", ret);

drivers/net/ethernet/ibm/ehea/ehea_main.c

3045

pr_err("setting up logical port with id=%d failed, ret=%d\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

3076

pr_err("bad device node: eth_dn name=%pOF\n", eth_dn);

drivers/net/ethernet/ibm/ehea/ehea_main.c

3081

pr_err("creating MR failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

3148

pr_err("creating MR failed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

3199

pr_err("removing port with logical port id=%d failed. port not configured.\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

3376

pr_err("Invalid ibmebus device probed\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

3548

pr_err("failed registering eHEA device driver on ebus\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

3555

pr_err("failed to register capabilities attribute, ret=%d\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

642

pr_err("Critical receive error for QP %d. Resetting port.\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

793

pr_err("HW/SW queues out of sync\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

827

pr_err("Bad send completion status=0x%04X\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

834

pr_err("Resetting port\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

935

pr_err("QP aff_err: entry=0x%llx, token=0x%x\n",

drivers/net/ethernet/ibm/ehea/ehea_main.c

954

pr_err("Resetting port\n");

drivers/net/ethernet/ibm/ehea/ehea_main.c

982

pr_err("no mem for cb0\n");

drivers/net/ethernet/ibm/ehea/ehea_phyp.c

104

pr_err("opcode=%lx ret=%lx"

drivers/net/ethernet/ibm/ehea/ehea_phyp.c

504

pr_err("not on pageboundary\n");

drivers/net/ethernet/ibm/ehea/ehea_phyp.c

58

pr_err("opcode=%lx ret=%lx"

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

130

pr_err("alloc_resource_cq failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

142

pr_err("hw_qpageit_get_inc failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

151

pr_err("register_rpage_cq failed ehea_cq=%p hret=%llx counter=%i act_pages=%i\n",

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

160

pr_err("registration of pages not complete hret=%llx\n",

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

166

pr_err("CQ: registration of page failed hret=%llx\n",

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

222

pr_err("destroy CQ failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

251

pr_err("alloc_resource_eq failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

258

pr_err("can't allocate eq pages\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

265

pr_err("hw_qpageit_get_inc failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

34

pr_err("not on pageboundary\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

349

pr_err("destroy EQ failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

372

pr_err("hw_qpageit_get_inc failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

380

pr_err("register_rpage_qp failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

416

pr_err("ehea_h_alloc_resource_qp failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

430

pr_err("can't register for sq ret=%x\n", ret);

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

440

pr_err("can't register for rq1 ret=%x\n", ret);

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

451

pr_err("can't register for rq2 ret=%x\n", ret);

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

463

pr_err("can't register for rq3 ret=%x\n", ret);

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

47

pr_err("pagesize conflict! kernel pagesize=%d, ehea pagesize=%d\n",

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

528

pr_err("destroy QP failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

814

pr_err("register_rpage_mr failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

868

pr_err("no mem\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

878

pr_err("alloc_resource_mr failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

885

pr_err("no busmap available\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

901

pr_err("registering mr failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

924

pr_err("destroy MR failed\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

959

pr_err("QP (resource=%llX) state: AER=0x%llX, AERR=0x%llX, port=%llX\n",

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

962

pr_err("CQ (resource=%llX) state: AER=0x%llX\n",

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

965

pr_err("EQ (resource=%llX) state: AER=0x%llX\n",

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

980

pr_err("Cannot allocate rblock memory\n");

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

992

pr_err("No error data available: %llX\n", res_handle);

drivers/net/ethernet/ibm/ehea/ehea_qmr.c

994

pr_err("Error data could not be fetched: %llX\n", res_handle);

drivers/net/ethernet/ibm/emac/core.c

2427

pr_err("%pOF: missing %s property", np, name);

drivers/net/ethernet/ibm/ibmvnic.c

5540

pr_err("mtu of %llu is not supported. Reverting.\n",

drivers/net/ethernet/intel/e100.c

3123

pr_err("Cannot re-enable PCI device after reset\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

1001

pr_err("No usable DMA config, aborting\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

5174

pr_err("Cannot enable PCI device from suspend\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

5285

pr_err("Cannot re-enable PCI device after reset.\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

725

pr_err("/*********************/\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

726

pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old);

drivers/net/ethernet/intel/e1000/e1000_main.c

727

pr_err("Calculated : 0x%04x\n", csum_new);

drivers/net/ethernet/intel/e1000/e1000_main.c

729

pr_err("Offset Values\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

730

pr_err("======== ======\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

733

pr_err("Include this output when contacting your support provider.\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

734

pr_err("This is not a software error! Something bad happened to\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

735

pr_err("your hardware or EEPROM image. Ignoring this problem could\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

736

pr_err("result in further problems, possibly loss of data,\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

737

pr_err("corruption or system hangs!\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

738

pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

739

pr_err("which is invalid and requires you to set the proper MAC\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

740

pr_err("address manually before continuing to enable this network\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

741

pr_err("device. Please inspect the EEPROM dump and report the\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

742

pr_err("issue to your hardware vendor or Intel Customer Support.\n");

drivers/net/ethernet/intel/e1000/e1000_main.c

743

pr_err("/*********************/\n");

drivers/net/ethernet/intel/i40e/i40e_main.c

16649

pr_err("%s: Failed to create workqueue\n", i40e_driver_name);

drivers/net/ethernet/intel/i40e/i40e_main.c

5423

pr_err("Non-contiguous TC - Disabling DCB\n");

drivers/net/ethernet/intel/ice/ice_dcb_lib.c

125

pr_err("Non-contiguous TCs - Disabling DCB\n");

drivers/net/ethernet/intel/ice/ice_main.c

5934

pr_err("Failed to create workqueue\n");

drivers/net/ethernet/intel/ice/ice_main.c

5940

pr_err("Failed to create LAG workqueue\n");

drivers/net/ethernet/intel/ice/ice_main.c

5948

pr_err("failed to register PCI driver, err %d\n", status);

drivers/net/ethernet/intel/ice/ice_main.c

5954

pr_err("Failed to register SF driver, err %d\n", status);

drivers/net/ethernet/intel/idpf/idpf_idc.c

211

pr_err("failed to allocate unique device ID for Auxiliary driver\n");

drivers/net/ethernet/intel/idpf/idpf_idc.c

73

pr_err("failed to allocate unique device ID for Auxiliary driver\n");

drivers/net/ethernet/intel/igbvf/netdev.c

1451

pr_err("Too many unicast filters - No Space\n");

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

12375

pr_err("%s: Failed to create workqueue\n", ixgbe_driver_name);

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

562

pr_err("%-15s%s\n", rname, buf);

drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c

1338

pr_err("Error receiving message from VF\n");

drivers/net/ethernet/intel/ixgbevf/ethtool.c

647

pr_err("set/check reg %04X test failed: got 0x%08X expected 0x%08X\n",

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

1825

pr_err("RXDCTL.ENABLE queue %d not cleared while polling\n",

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

1845

pr_err("RXDCTL.ENABLE queue %d not set while polling\n",

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

3100

pr_err("init_shared_code failed: %d\n", err);

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

3660

pr_err("Unable to start - perhaps the PF Driver isn't up yet\n");

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

377

pr_err("Detected Tx Unit Hang%s\n"

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

4628

pr_err("invalid MAC address\n");

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

4921

pr_err("%s: Failed to create workqueue\n", ixgbevf_driver_name);

drivers/net/ethernet/intel/ixgbevf/vf.c

144

pr_err("PCI_MMCONFIG needs to be enabled for Hyper-V\n");

drivers/net/ethernet/jme.c

1304

pr_err("Allocating resources for RX error, Device STOPPED!\n");

drivers/net/ethernet/jme.c

1310

pr_err("Allocating resources for TX error, Device STOPPED!\n");

drivers/net/ethernet/jme.c

2920

pr_err("Cannot enable PCI device\n");

drivers/net/ethernet/jme.c

2926

pr_err("Cannot set PCI DMA Mask\n");

drivers/net/ethernet/jme.c

293

pr_err("eeprom reload timeout\n");

drivers/net/ethernet/jme.c

2932

pr_err("No PCI resource region found\n");

drivers/net/ethernet/jme.c

2939

pr_err("Cannot obtain PCI resource region\n");

drivers/net/ethernet/jme.c

2997

pr_err("Mapping PCI resource region error\n");

drivers/net/ethernet/jme.c

3070

pr_err("Can not find phy_id\n");

drivers/net/ethernet/jme.c

3102

pr_err("Reload eeprom for reading MAC Address error\n");

drivers/net/ethernet/jme.c

3114

pr_err("Cannot register net device\n");

drivers/net/ethernet/jme.c

463

pr_err("Waiting speed resolve timeout\n");

drivers/net/ethernet/jme.c

67

pr_err("phy(%d) read timeout : %d\n", phy, reg);

drivers/net/ethernet/jme.c

696

pr_err("Disable TX engine timeout\n");

drivers/net/ethernet/jme.c

931

pr_err("Disable RX engine timeout\n");

drivers/net/ethernet/jme.c

96

pr_err("phy(%d) write timeout : %d\n", phy, reg);

drivers/net/ethernet/lantiq_etop.c

730

pr_err("ltq_etop: Error registering platform driver!");

drivers/net/ethernet/marvell/mvneta.c

2053

pr_err("Can't refill queue %d. Done %d from %d\n",

drivers/net/ethernet/marvell/octeon_ep/octep_main.c

1674

pr_err("%s: Failed to create common workqueue\n",

drivers/net/ethernet/marvell/octeon_ep/octep_main.c

1681

pr_err("%s: Failed to register PCI driver; err=%d\n",

drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c

1215

pr_err("%s: Failed to register PCI driver; err=%d\n",

drivers/net/ethernet/marvell/prestera/prestera_flower.c

131

pr_err("Unsupported action\n");

drivers/net/ethernet/marvell/prestera/prestera_router.c

1039

pr_err("Cannot find nh_neigh for cached %pI4n",

drivers/net/ethernet/marvell/prestera/prestera_router.c

1068

pr_err("Cannot create neighbour %pI4n", &nc->key.addr.u.ipv4);

drivers/net/ethernet/marvell/prestera/prestera_router.c

767

pr_err("%s failed ip=%pI4n", "prestera_fib_node_create",

drivers/net/ethernet/marvell/prestera/prestera_router.c

840

pr_err("%s failed with err=%d ip=%pI4n mac=%pM",

drivers/net/ethernet/marvell/prestera/prestera_router_hw.c

555

pr_err("Failed to get hw state nh_grp's");

drivers/net/ethernet/marvell/prestera/prestera_router_hw.c

595

pr_err("Unknown fib_node->info.type = %d",

drivers/net/ethernet/marvell/prestera/prestera_router_hw.c

660

pr_err("Unsupported fib_type %d", fib_type);

drivers/net/ethernet/marvell/skge.c

1880

pr_err("%s: uncorrectable pair swap error\n",

drivers/net/ethernet/marvell/skge.c

2414

pr_err("%s: autonegotiation failed (%s)\n", skge->netdev->name, reason);

drivers/net/ethernet/mediatek/mtk_wed.c

2608

pr_err("mtk_wed%d: error status=%08x\n", dev->hw->index, val);

drivers/net/ethernet/mellanox/mlx4/eq.c

319

pr_err("%s: Error: asking for slave:%d, port:%d\n",

drivers/net/ethernet/mellanox/mlx4/eq.c

336

pr_err("%s: Error: asking for slave:%d, port:%d\n",

drivers/net/ethernet/mellanox/mlx4/eq.c

382

pr_err("%s: Error: asking for slave:%d, port:%d\n",

drivers/net/ethernet/mellanox/mlx4/eq.c

419

pr_err("%s: BUG!!! UNKNOWN state: slave:%d, port:%d\n",

drivers/net/ethernet/mellanox/mlx4/mlx4_en.h

835

pr_err(DRV_NAME " %s: " format, \

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

1205

pr_err("implementation missing\n");

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

1333

pr_err("resource tracker: fail to remove qp, state %d, ref_count %d\n",

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4159

pr_err("Fail to attach rule to qp 0x%x\n", qpn);

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4176

pr_err("Fail to detach rule from qp 0x%x reg_id = 0x%llx\n",

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4207

pr_err("MAC %pM doesn't belong to VF %d, Steering rule rejected\n",

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4259

pr_err("Failed adding eth header to FS rule, Can't find matching MAC for port %d\n",

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4390

pr_err("Steering rule with qpn 0x%x rejected\n", qpn);

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4420

pr_err("Corrupted mailbox\n");

drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c

268

pr_err("Requested port buffer is too large, not enough space left for shared buffer\n");

drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c

375

pr_err("buffer_size[%d]=%d is not enough for lossless buffer\n",

drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c

1543

pr_err("%s rate value %lluMbps exceed link maximum speed %u.\n",

drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c

1595

pr_err("%s rate value %lluBps not in link speed units of 1Mbps.\n",

drivers/net/ethernet/mellanox/mlx5/core/fs_core.c

1289

pr_err("mlx5_core: failed to modify rule to point on flow table %d\n",

drivers/net/ethernet/mellanox/mlx5/core/fs_core.c

1349

pr_err("mlx5: flow steering failed to find root of namespace\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

104

pr_err("Multi has invalid child");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

128

pr_err("Device %d is not a valid TLV error\n", dev_idx);

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

139

pr_err("Device %d does not have PSID\n", dev_idx);

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

145

pr_err("Device %d PSID TLV is not valid\n", dev_idx);

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

160

pr_err("Device %d has no components\n", dev_idx);

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

173

pr_err("Device %d COMPONENT_PTR TLV is not valid\n",

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

197

pr_err("Component %d is not a valid TLV error\n", comp_idx);

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

207

pr_err("Component descriptor %d multi TLV error\n", comp_idx);

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

213

pr_err("Component %d does not have a valid descriptor\n",

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

236

pr_err("Device TLV error\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

249

pr_err("Device TLV error\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

278

pr_err("Could not parse package descriptor TLV\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

284

pr_err("First TLV is not of valid multi type\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

294

pr_err("Could not parse package descriptor TLV\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

300

pr_err("First device TLV is not valid\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

311

pr_err("Component block is out side the file\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

317

pr_err("Component block size is too big\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

405

pr_err("xz no memory\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

408

pr_err("xz file corrupted\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

411

pr_err("xz format not found\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

414

pr_err("unsupported xz option\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

417

pr_err("xz dictionary too small\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

420

pr_err("xz error %d\n", xz_ret);

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

454

pr_err("xz section too short\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

560

pr_err("Component could not be reached in CB\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c

566

pr_err("Component has wrong magic\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c

67

pr_err("TLV parsing error\n");

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2_tlv_multi.c

88

pr_err("TLV parsing error\n");

drivers/net/ethernet/mellanox/mlxsw/item.h

215

pr_err("mlxsw: item bug (name=%s,offset=%x,element_size=%x)\n",

drivers/net/ethernet/mellanox/mlxsw/item.h

33

pr_err("mlxsw: item bug (name=%s,offset=%x,step=%x,in_step_offset=%x,typesize=%zx)\n",

drivers/net/ethernet/micrel/ks8842.c

1004

pr_err("Failed to request IRQ: %d: %d\n", adapter->irq, err);

drivers/net/ethernet/microchip/encx24j600-regmap.c

268

pr_err("%s: reg=%02x reg_size=%zu\n", __func__, reg, reg_size);

drivers/net/ethernet/microchip/encx24j600-regmap.c

276

pr_err("%s: reg=%02x val_size=%zu\n", __func__, reg, val_size);

drivers/net/ethernet/microchip/encx24j600-regmap.c

377

pr_err("%s: error %d reading reg %02x\n", __func__, ret,

drivers/net/ethernet/microchip/encx24j600-regmap.c

406

pr_err("%s: error %d writing reg %02x=%04x\n", __func__, ret,

drivers/net/ethernet/microchip/lan966x/lan966x_main.c

1132

pr_err("Unable to use xtr irq");

drivers/net/ethernet/microchip/lan966x/lan966x_port.c

110

pr_err("Flush timeout chip port %u", port->chip_port);

drivers/net/ethernet/microchip/lan966x/lan966x_port.c

46

pr_err("AFI timeout chip port %u", port->chip_port);

drivers/net/ethernet/microchip/lan966x/lan966x_vcap_impl.c

299

pr_err("vcap type: %s not supported\n",

drivers/net/ethernet/microchip/lan966x/lan966x_vcap_impl.c

382

pr_err("vcap type: %s not supported\n",

drivers/net/ethernet/microchip/lan966x/lan966x_vcap_impl.c

702

pr_err("vcap type: %s not supported\n",

drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_calendar.c

122

pr_err("Required bandwidth: %u is higher than total taxi bandwidth: %u",

drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_calendar.c

166

pr_err("Invalid length: %u for taxi: %u", cal_len, taxi);

drivers/net/ethernet/microchip/sparx5/sparx5_sdlb.c

282

pr_err("%s:%d Could not find idx: %d in group: %d", __func__,

drivers/net/ethernet/microchip/sparx5/sparx5_tc.c

137

pr_err("Invalid ets configuration; band %d has weight zero",

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1351

pr_err("%s:%d Could not delete invalid fmid: %d", __func__,

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1355

pr_err("%s:%d Could not delete invalid sgid: %d", __func__,

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1359

pr_err("%s:%d Could not delete invalid sfid: %d", __func__,

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1405

pr_err("%s:%d: could not free resources %d\n",

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1410

pr_err("%s:%d: could not delete rule %d\n",

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1455

pr_err("%s:%d: %s\n", __func__, __LINE__,

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1462

pr_err("%s:%d: %s\n", __func__, __LINE__,

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1487

pr_err("%s:%d: key error: %d\n", __func__, __LINE__, err);

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

1499

pr_err("%s:%d: %s\n", __func__, __LINE__,

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

387

pr_err("%s:%d: vcap type: %d not supported\n",

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

516

pr_err("%s:%d: could not set keyset %s in rule: %u\n",

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

536

pr_err("%s:%d: could not validate rule: %u\n",

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

543

pr_err("%s:%d: could not add rule: %u\n",

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

593

pr_err("%s:%d: %s\n", __func__, __LINE__, "Invalid VCAP type");

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

650

pr_err("%s:%d: unsupported chain direction: %d\n",

drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c

694

pr_err("%s:%d: unsupported chain destination: %d\n",

drivers/net/ethernet/microchip/sparx5/sparx5_vcap_impl.c

1032

pr_err("%s:%d: cannot write all streams at once\n",

drivers/net/ethernet/microchip/sparx5/sparx5_vcap_impl.c

1073

pr_err("%s:%d: cannot write all streams at once\n",

drivers/net/ethernet/microchip/sparx5/sparx5_vcap_impl.c

156

pr_err("%s: vcap type: %s not supported\n",

drivers/net/ethernet/microchip/sparx5/sparx5_vcap_impl.c

2067

pr_err("%s:%d: vcap allocation failed: %d\n",

drivers/net/ethernet/microchip/sparx5/sparx5_vcap_impl.c

793

pr_err("%s:%d: %s not supported in port key selection\n",

drivers/net/ethernet/microchip/sparx5/sparx5_vcap_impl.c

814

pr_err("%s:%d: %s: could not add an ingress port mask for: %s\n",

drivers/net/ethernet/microchip/sparx5/sparx5_vcap_impl.c

931

pr_err("%s:%d: cannot write all streams at once\n",

drivers/net/ethernet/microchip/sparx5/sparx5_vcap_impl.c

972

pr_err("%s:%d: cannot write all streams at once\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

1447

pr_err("%s:%d: could not find valid actionset: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

1499

pr_err("%s:%d: could not find valid keysets: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

1539

pr_err("%s:%d: rule is empty\n", __func__, __LINE__);

drivers/net/ethernet/microchip/vcap/vcap_api.c

1571

pr_err("%s:%d: rule is empty\n", __func__, __LINE__);

drivers/net/ethernet/microchip/vcap/vcap_api.c

1703

pr_err("%s:%d: No room for rule size: %u, %u\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

2024

pr_err("%s:%d: keyset validation failed: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

2032

pr_err("%s:%d: keyset was not updated: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

2050

pr_err("%s:%d: actionset was not updated: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

2274

pr_err("%s:%d: could not insert rule in vcap list: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

2295

pr_err("%s:%d: rule encoding error: %d\n", __func__, __LINE__, ret);

drivers/net/ethernet/microchip/vcap/vcap_api.c

2301

pr_err("%s:%d: rule write error: %d\n", __func__, __LINE__, ret);

drivers/net/ethernet/microchip/vcap/vcap_api.c

2686

pr_err("%s:%d: keyfield %s does not belong in the rule keyset\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

2854

pr_err("%s:%d: actionfield %s does not belong in the rule actionset\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

3269

pr_err("%s:%d: counter is missing\n", __func__, __LINE__);

drivers/net/ethernet/microchip/vcap/vcap_api.c

3290

pr_err("%s:%d: counter is missing\n", __func__, __LINE__);

drivers/net/ethernet/microchip/vcap/vcap_api.c

3459

pr_err("%s:%d: key %s is not in the rule\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

646

pr_err("%s:%d: no fields available for this keyset: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

654

pr_err("%s:%d: no typegroups available for this keyset: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

662

pr_err("%s:%d: zero field count for this keyset: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

670

pr_err("%s:%d: no keyfields in the rule\n", __func__, __LINE__);

drivers/net/ethernet/microchip/vcap/vcap_api.c

676

pr_err("%s:%d: key %d is not in vcap\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

805

pr_err("%s:%d: no fields available for this actionset: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

813

pr_err("%s:%d: no typegroups available for this actionset: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

821

pr_err("%s:%d: zero field count for this actionset: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

834

pr_err("%s:%d: action %d is not in vcap\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

863

pr_err("%s:%d: vcap control is missing\n", __func__, __LINE__);

drivers/net/ethernet/microchip/vcap/vcap_api.c

871

pr_err("%s:%d: client operations are missing\n",

drivers/net/ethernet/microchip/vcap/vcap_api_debugfs.c

178

pr_err("%s:%d: could not find valid keysets: %d\n",

drivers/net/ethernet/microchip/vcap/vcap_api_debugfs_kunit.c

189

pr_err("%s:%d: cannot write all streams at once\n",

drivers/net/ethernet/microchip/vcap/vcap_api_debugfs_kunit.c

203

pr_err("%s:%d: overflow: %d\n", __func__, __LINE__,

drivers/net/ethernet/microchip/vcap/vcap_api_debugfs_kunit.c

266

pr_err("%s:%d: overflow: %d\n", __func__, __LINE__,

drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c

180

pr_err("%s:%d: cannot write all streams at once\n",

drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c

194

pr_err("%s:%d: overflow: %d\n", __func__, __LINE__, test_updateaddridx);

drivers/net/ethernet/myricom/myri10ge/myri10ge.c

4048

pr_err("Illegal rssh hash type %d, defaulting to source port\n",

drivers/net/ethernet/netronome/nfp/bpf/jit.c

112

pr_err("cmd can't swap arguments\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

117

pr_err("cmd can't use LMextn\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

166

pr_err("BUG: branch defer out of bounds %d\n", defer);

drivers/net/ethernet/netronome/nfp/bpf/jit.c

3312

pr_err("BUG: BPF-to-BPF call has no destination recorded\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

3545

pr_err("BUG: failed to fix up callee register saving\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

3585

pr_err("Fixup found block not ending in branch %d %02x %016llx!!\n",

drivers/net/ethernet/netronome/nfp/bpf/jit.c

3599

pr_err("Non-exit jump doesn't have destination info recorded!!\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

3606

pr_err("Branch landing on removed instruction!!\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

385

pr_err("indirect shift is not allowed on rotation\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

4481

pr_err("Translation failed with error %d (translated: %u)\n",

drivers/net/ethernet/netronome/nfp/bpf/jit.c

4567

pr_err("BUG: failed to detect subprogram registers needs\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

4576

pr_err("BUG: failed to detect subprogram registers needs\n");

drivers/net/ethernet/netronome/nfp/bpf/jit.c

4603

pr_err("relocation of unknown helper %d\n",

drivers/net/ethernet/netronome/nfp/bpf/jit.c

637

pr_err("relocation of a large immediate!\n");

drivers/net/ethernet/netronome/nfp/nfp_asm.c

133

pr_err("LM offset too large\n");

drivers/net/ethernet/netronome/nfp/nfp_asm.c

143

pr_err("LM offset in inc/dev mode\n");

drivers/net/ethernet/netronome/nfp/nfp_asm.c

150

pr_err("bad LM mode for unrestricted operands %d\n",

drivers/net/ethernet/netronome/nfp/nfp_asm.c

156

pr_err("immediate too large\n");

drivers/net/ethernet/netronome/nfp/nfp_asm.c

164

pr_err("unrecognized reg encoding %08x\n", reg);

drivers/net/ethernet/netronome/nfp/nfp_asm.c

220

pr_err("bad LM mode for restricted operands %d\n",

drivers/net/ethernet/netronome/nfp/nfp_asm.c

226

pr_err("LM offset too large\n");

drivers/net/ethernet/netronome/nfp/nfp_asm.c

233

pr_err("immediate too large\n");

drivers/net/ethernet/netronome/nfp/nfp_asm.c

241

pr_err("NNRs used with restricted encoding\n");

drivers/net/ethernet/netronome/nfp/nfp_asm.c

245

pr_err("unrecognized reg encoding\n");

drivers/net/ethernet/netronome/nfp/nfp_asm.c

65

pr_err("Can't decode/encode immed!\n");

drivers/net/ethernet/netronome/nfp/nfpcore/nfp_rtsym.c

212

pr_err("rtsym '%s': type NONE\n", sym->name);

drivers/net/ethernet/netronome/nfp/nfpcore/nfp_target.c

711

pr_err("Invalid CPP target: %d\n", target);

drivers/net/ethernet/netronome/nfp/nfpcore/nfp_target.c

733

pr_err("Can't encode CPP address: %d\n", err);

drivers/net/ethernet/nvidia/forcedeth.c

5729

pr_err("np->txrx_stats, alloc memory error.\n");

drivers/net/ethernet/nxp/lpc_eth.c

1416

pr_err("%s: not found (%d).\n", MODNAME, ret);

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c

303

pr_err("Error: busy bit is not cleared\n");

drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c

1359

pr_err("Receive Peg initialization not complete, state: 0x%x.\n", val);

drivers/net/ethernet/qlogic/qed/qed_rdma.c

1261

pr_err("qed roce create qp failed due to NULL entry (rdma_cxt=%p, in=%p, out=%p, roce_info=?\n",

drivers/net/ethernet/qlogic/qede/qede_main.c

782

pr_err("etherdev allocation failed\n");

drivers/net/ethernet/qlogic/qla3xxx.c

3760

pr_err("%s cannot enable PCI device\n", pci_name(pdev));

drivers/net/ethernet/qlogic/qla3xxx.c

3766

pr_err("%s cannot obtain PCI resources\n", pci_name(pdev));

drivers/net/ethernet/qlogic/qla3xxx.c

3774

pr_err("%s no usable DMA configuration\n", pci_name(pdev));

drivers/net/ethernet/qlogic/qla3xxx.c

3805

pr_err("%s: cannot map device registers\n", pci_name(pdev));

drivers/net/ethernet/qlogic/qla3xxx.c

3855

pr_err("%s: cannot register net device\n", pci_name(pdev));

drivers/net/ethernet/qlogic/qla3xxx.c

533

pr_err("%s: Failed ql_sem_spinlock()\n", __func__);

drivers/net/ethernet/qualcomm/qca_uart.c

322

pr_err("qca_uart: Fail to retrieve private structure\n");

drivers/net/ethernet/realtek/8139too.c

134

pr_err("Assertion failed! %s,%s,%s,line=%d\n", \

drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c

296

pr_err("Invalid Error type\n");

drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c

341

pr_err("Invalid L2 Packet type\n");

drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c

376

pr_err("Invalid L3/L4 Packet type\n");

drivers/net/ethernet/samsung/sxgbe/sxgbe_desc.c

455

pr_err("Time stamp corrupted\n");

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

1257

pr_err("%s: TX dma mapping failed!!\n", __func__);

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

2178

pr_err("%s: ERROR %i registering the device\n", __func__, ret);

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

2268

pr_err("driver registration failed\n");

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

2296

pr_err("%s: ERROR broken module parameter conversion\n", __func__);

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c

724

pr_err("ERROR: %s: Invalid TX threshold mode\n", __func__);

drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c

102

pr_err("%s: main dt probe failed\n", __func__);

drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c

109

pr_err("%s: main driver probe failed\n", __func__);

drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c

241

pr_err("failed to register the platform driver\n");

drivers/net/ethernet/sfc/falcon/falcon.c

761

pr_err("%s: timed out waiting for %s\n",

drivers/net/ethernet/sfc/falcon/mtd.c

36

pr_err("%s: %s sync failed (%d)\n",

drivers/net/ethernet/sfc/mtd.c

36

pr_err("%s: %s sync failed (%d)\n",

drivers/net/ethernet/sfc/siena/mtd.c

36

pr_err("%s: %s sync failed (%d)\n",

drivers/net/ethernet/sgi/ioc3-eth.c

888

pr_err("ioc3-eth: rx ring allocation failed\n");

drivers/net/ethernet/sgi/ioc3-eth.c

897

pr_err("ioc3-eth: tx ring allocation failed\n");

drivers/net/ethernet/sis/sis190.c

1484

pr_err("%s: enable failure\n", pci_name(pdev));

drivers/net/ethernet/sis/sis190.c

1492

pr_err("%s: region #0 is no MMIO resource\n",

drivers/net/ethernet/sis/sis190.c

1498

pr_err("%s: invalid PCI region size(s)\n",

drivers/net/ethernet/sis/sis190.c

1506

pr_err("%s: could not request regions\n",

drivers/net/ethernet/sis/sis190.c

1514

pr_err("%s: DMA configuration failed\n",

drivers/net/ethernet/sis/sis190.c

1524

pr_err("%s: cannot remap MMIO, aborting\n",

drivers/net/ethernet/sis/sis190.c

380

pr_err("PHY command failed !\n");

drivers/net/ethernet/smsc/smc91c92_cs.c

655

pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME);

drivers/net/ethernet/smsc/smc91x.h

820

pr_err("%s: bank reg screwed (0x%04x)\n", \

drivers/net/ethernet/smsc/smsc9420.c

1505

pr_err("Cannot enable smsc9420\n");

drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c

459

pr_err("unsupported descriptor!");

drivers/net/ethernet/stmicro/stmmac/enh_desc.c

204

pr_err("\tIPC Csum Error/Giant frame\n");

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

232

pr_err("stmmac: invalid burst length %u at index %zu\n",

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

8360

pr_err("%s: ERROR broken module parameter conversion", __func__);

drivers/net/ethernet/sun/cassini.c

3410

pr_err("MII phy did not respond [%08x]\n",

drivers/net/ethernet/sun/cassini.c

3823

pr_err("reset called in cas_change_mtu\n");

drivers/net/ethernet/sun/cassini.c

4133

pr_err("reset called in cas_link_timer\n");

drivers/net/ethernet/sun/cassini.c

797

pr_err("Failed to load firmware \"%s\"\n",

drivers/net/ethernet/sun/cassini.c

802

pr_err("bogus length %zu in \"%s\"\n",

drivers/net/ethernet/sun/ldmvsw.c

295

pr_err("Port lacks %s property\n", remote_macaddr_prop);

drivers/net/ethernet/sun/ldmvsw.c

303

pr_err("Port lacks %s property\n", id_prop);

drivers/net/ethernet/sun/ldmvsw.c

312

pr_err("Failed to get vnet for vsw-port\n");

drivers/net/ethernet/sun/ldmvsw.c

322

pr_err("Failed to alloc netdev for vsw-port\n");

drivers/net/ethernet/sun/ldmvsw.c

369

pr_err("Cannot register net device, aborting\n");

drivers/net/ethernet/sun/ldmvsw.c

444

pr_err("Ports not removed by VIO subsystem!\n");

drivers/net/ethernet/sun/niu.c

8622

pr_err("Too many PHY ports\n");

drivers/net/ethernet/sun/niu.c

8735

pr_err("niu%d: Too many RX channels (%d), resetting to one per port\n",

drivers/net/ethernet/sun/niu.c

8741

pr_err("niu%d: Too many TX channels (%d), resetting to one per port\n",

drivers/net/ethernet/sun/niu.c

8946

pr_err("Unsupported port config 10G[%d] 1G[%d]\n",

drivers/net/ethernet/sun/niu.c

8964

pr_err("Cannot identify platform type, 1gport=%d\n", lowest_1g);

drivers/net/ethernet/sun/sungem.c

1968

pr_err("RIO GEM lacks MII phy, mif_cfg[%08x]\n",

drivers/net/ethernet/sun/sungem.c

2008

pr_err("RIO MII phy will not respond\n");

drivers/net/ethernet/sun/sungem.c

2023

pr_err("GEM has bogus fifo sizes tx(%d) rx(%d)\n",

drivers/net/ethernet/sun/sungem.c

2031

pr_err("RIO GEM has bogus fifo sizes tx(%d) rx(%d)\n",

drivers/net/ethernet/sun/sungem.c

2785

pr_err("%s: can't get mac-address\n", dev->name);

drivers/net/ethernet/sun/sungem.c

2850

pr_err("Cannot enable MMIO operation, aborting\n");

drivers/net/ethernet/sun/sungem.c

2871

pr_err("No usable DMA configuration, aborting\n");

drivers/net/ethernet/sun/sungem.c

2881

pr_err("Cannot find proper PCI device base address, aborting\n");

drivers/net/ethernet/sun/sungem.c

2897

pr_err("Cannot obtain PCI resources, aborting\n");

drivers/net/ethernet/sun/sungem.c

2916

pr_err("Cannot map device registers, aborting\n");

drivers/net/ethernet/sun/sungem.c

2960

pr_err("Cannot allocate init block, aborting\n");

drivers/net/ethernet/sun/sungem.c

2990

pr_err("Cannot register net device, aborting\n");

drivers/net/ethernet/sun/sunhme.c

125

pr_err("TXLOG[%d]: j[%08x] tx[N(%d)O(%d)] action[%08x] stat[%08x]\n", i,

drivers/net/ethernet/sun/sunvnet.c

315

pr_err("Cannot register net device, aborting\n");

drivers/net/ethernet/sun/sunvnet.c

427

pr_err("Cannot find port parent vnet\n");

drivers/net/ethernet/sun/sunvnet.c

435

pr_err("Port lacks %s property\n", remote_macaddr_prop);

drivers/net/ethernet/sun/sunvnet_common.c

1244

pr_err("vnet_handle_offloads GSO with unknown transport "

drivers/net/ethernet/sun/sunvnet_common.c

58

pr_err("Received unknown msg [%02x:%02x:%04x:%08x]\n",

drivers/net/ethernet/sun/sunvnet_common.c

60

pr_err("Resetting connection\n");

drivers/net/ethernet/sun/sunvnet_common.c

657

pr_err("RX out of sequence seq[0x%llx] rcv_nxt[0x%llx]\n",

drivers/net/ethernet/sun/sunvnet_common.c

747

pr_err("%s: Got unexpected MCAST reply [%02x:%02x:%04x:%08x]\n",

drivers/net/ethernet/tehuti/tehuti.c

163

pr_err("dma_alloc_coherent failed\n");

drivers/net/ethernet/tehuti/tehuti.c

1905

pr_err("No usable DMA configuration, aborting\n");

drivers/net/ethernet/tehuti/tehuti.c

1918

pr_err("no MMIO resource\n");

drivers/net/ethernet/tehuti/tehuti.c

1924

pr_err("MMIO resource (%x) too small\n", regionSize);

drivers/net/ethernet/tehuti/tehuti.c

1931

pr_err("ioremap failed\n");

drivers/net/ethernet/tehuti/tehuti.c

1937

pr_err("invalid irq (%d)\n", pdev->irq);

drivers/net/ethernet/tehuti/tehuti.c

1956

pr_err("Can't enable msi. error is %d\n", err);

drivers/net/ethernet/tehuti/tehuti.c

2032

pr_err("load MAC address failed\n");

drivers/net/ethernet/tehuti/tehuti.c

2039

pr_err("register_netdev failed\n");

drivers/net/ethernet/tehuti/tehuti.c

471

pr_err("HW reset failed\n");

drivers/net/ethernet/tehuti/tehuti.c

495

pr_err("HW reset failed\n");

drivers/net/ethernet/tehuti/tehuti.c

653

pr_err("can't copy from user\n");

drivers/net/ethernet/tehuti/tehuti.c

708

pr_err("invalid VID: %u (> 4096)\n", vid);

drivers/net/ethernet/tehuti/tehuti.h

531

pr_err("%s:%-5d: " fmt, __func__, __LINE__, ## args)

drivers/net/ethernet/tehuti/tehuti.h

539

pr_err("%s:%-5d: ENTER\n", __func__, __LINE__); \

drivers/net/ethernet/tehuti/tehuti.h

544

pr_err("%s:%-5d: RETURN\n", __func__, __LINE__); \

drivers/net/ethernet/tehuti/tehuti.h

549

pr_err("%s:%-5d: " fmt, __func__, __LINE__, ## args)

drivers/net/ethernet/tehuti/tehuti.h

556

pr_err(fmt, ##args); \

drivers/net/ethernet/tehuti/tn40_mdio.c

190

pr_err("swnodes failed\n");

drivers/net/ethernet/ti/netcp_sgmii.c

133

pr_err("serdes PLL not locked\n");

drivers/net/ethernet/ti/netcp_xgbepcsr.c

226

pr_err("XGBE serdes not locked: time out.\n");

drivers/net/ethernet/ti/netcp_xgbepcsr.c

371

pr_err("XGBE: unknown current_state[%d] %d\n",

drivers/net/ethernet/ti/tlan.c

392

pr_err("Could not register pci driver\n");

drivers/net/ethernet/ti/tlan.c

459

pr_err("Could not reserve IO regions\n");

drivers/net/ethernet/ti/tlan.c

485

pr_err("No suitable PCI mapping available\n");

drivers/net/ethernet/ti/tlan.c

499

pr_err("No IO mappings available\n");

drivers/net/ethernet/ti/tlan.c

554

pr_err("Could not set up device\n");

drivers/net/ethernet/ti/tlan.c

560

pr_err("Could not register device\n");

drivers/net/ethernet/ti/tlan.c

831

pr_err("Could not allocate lists and buffers for %s\n",

drivers/net/ethernet/ti/tlan.c

848

pr_err("%s: Error reading MAC from eeprom: %d\n",

drivers/net/ethernet/toshiba/ps3_gelic_wireless.c

1258

pr_err("%s: PSK length wrong %d\n", __func__,

drivers/net/fddi/defxx.c

498

pr_err("%s: Cannot reserve %s resource 0x%lx @ 0x%lx, aborting\n",

drivers/net/fddi/defxx.c

560

pr_err("%s: Cannot enable PCI device, aborting\n",

drivers/net/fddi/defza.c

1050

pr_err("%s: RESET timed out!\n", fp->name);

drivers/net/fddi/defza.c

1202

pr_err("%s: PARAM command timed out!, state %x\n", fp->name,

drivers/net/fddi/defza.c

1208

pr_err("%s: PARAM command failed!, status %02x, state %x\n",

drivers/net/fddi/defza.c

1244

pr_err("%s: SHUT timed out!, state %x\n", fp->name, state);

drivers/net/fddi/defza.c

1248

pr_err("%s: SHUT failed!, state %x\n", fp->name, state);

drivers/net/fddi/defza.c

1315

pr_err("%s: cannot reserve MMIO region\n", fp->name);

drivers/net/fddi/defza.c

1323

pr_err("%s: cannot map MMIO\n", fp->name);

drivers/net/fddi/defza.c

1362

pr_err("%s: unable to get IRQ %d!\n", fp->name, dev->irq);

drivers/net/fddi/defza.c

1507

pr_err("%s: initialization failure, aborting!\n", fp->name);

drivers/net/fddi/defza.c

270

pr_err("%s: RESET timed out!, state %x\n", fp->name, state);

drivers/net/fddi/defza.c

274

pr_err("%s: RESET failed!, state %x, failure ID %x\n",

drivers/net/fddi/defza.c

399

pr_err("%s: INIT command timed out!, state %x\n", fp->name,

drivers/net/fddi/defza.c

405

pr_err("%s: INIT command failed!, status %02x, state %x\n",

drivers/net/fjes/fjes_hw.c

385

pr_err("%s: reset error", __func__);

drivers/net/fjes/fjes_hw.c

39

pr_err("request_mem_region failed\n");

drivers/net/gtp.c

2525

pr_err("error loading GTP module loaded\n");

drivers/net/hamradio/6pack.c

706

pr_err("6pack: can't register line discipline (err = %d)\n", status);

drivers/net/hamradio/6pack.c

767

pr_err("6pack: cooked buffer overrun, data loss\n");

drivers/net/hamradio/baycom_epp.c

852

pr_err("%s: no device found\n", bc_drvname);

drivers/net/hamradio/baycom_par.c

331

pr_err("%s: no device found\n", bc_drvname);

drivers/net/hamradio/bpqether.c

247

pr_err("bpqether: out of memory\n");

drivers/net/hamradio/yam.c

1125

pr_err("yam: cannot allocate net device\n");

drivers/net/hyperv/netvsc_drv.c

2597

pr_err("Unable to register netdev.\n");

drivers/net/mdio/mdio-xgene.c

253

pr_err("XGENET_MII_MGMT write failed\n");

drivers/net/mdio/mdio-xgene.c

73

pr_err("MCX mac write failed, addr: 0x%04x\n", wr_addr);

drivers/net/netconsole.c

2059

pr_err("Netconsole configuration error. Release feature requires extended log message");

drivers/net/netconsole.c

2074

pr_err("Not enabling netconsole for %s%d. Netpoll setup failed\n",

drivers/net/netconsole.c

2183

pr_err("cleaning up\n");

drivers/net/netconsole.c

704

pr_err("Not enabling netconsole. Release feature requires extended log message");

drivers/net/netconsole.c

770

pr_err("target (%s) is enabled, disable to update parameters\n",

drivers/net/netconsole.c

797

pr_err("target (%s) is enabled, disable to update parameters\n",

drivers/net/netconsole.c

821

pr_err("target (%s) is enabled, disable to update parameters\n",

drivers/net/netconsole.c

842

pr_err("target (%s) is enabled, disable to update parameters\n",

drivers/net/netconsole.c

864

pr_err("target (%s) is enabled, disable to update parameters\n",

drivers/net/netconsole.c

887

pr_err("target (%s) is enabled, disable to update parameters\n",

drivers/net/netconsole.c

912

pr_err("target (%s) is enabled, disable to update parameters\n",

drivers/net/netconsole.c

947

pr_err("target (%s) is enabled, disable to update parameters\n",

drivers/net/netdevsim/bus.c

175

pr_err("Value of \"id\" is too big.\n");

drivers/net/netdevsim/bus.c

180

pr_err("Format for adding new device is \"id port_count num_queues\" (uint uint unit).\n");

drivers/net/netdevsim/bus.c

224

pr_err("Value of \"id\" is too big.\n");

drivers/net/netdevsim/bus.c

229

pr_err("Format for deleting device is \"id\" (uint).\n");

drivers/net/netdevsim/bus.c

264

pr_err("Format for linking two devices is \"netnsfd_a:ifidx_a netnsfd_b:ifidx_b\" (int uint int uint).\n");

drivers/net/netdevsim/bus.c

270

pr_err("Could not find netns with fd: %d\n", netnsfd_a);

drivers/net/netdevsim/bus.c

276

pr_err("Could not find netns with fd: %d\n", netnsfd_b);

drivers/net/netdevsim/bus.c

285

pr_err("Could not find device with ifindex %u in netnsfd %d\n",

drivers/net/netdevsim/bus.c

291

pr_err("Device with ifindex %u in netnsfd %d is not a netdevsim\n",

drivers/net/netdevsim/bus.c

298

pr_err("Could not find device with ifindex %u in netnsfd %d\n",

drivers/net/netdevsim/bus.c

304

pr_err("Device with ifindex %u in netnsfd %d is not a netdevsim\n",

drivers/net/netdevsim/bus.c

310

pr_err("Cannot link a netdevsim to itself\n");

drivers/net/netdevsim/bus.c

318

pr_err("Netdevsim %d:%u is already linked\n", netnsfd_a,

drivers/net/netdevsim/bus.c

326

pr_err("Netdevsim %d:%u is already linked\n", netnsfd_b,

drivers/net/netdevsim/bus.c

359

pr_err("Format for unlinking a device is \"netnsfd:ifidx\" (int uint).\n");

drivers/net/netdevsim/bus.c

365

pr_err("Could not find netns with fd: %d\n", netnsfd);

drivers/net/netdevsim/bus.c

373

pr_err("Could not find device with ifindex %u in netnsfd %d\n",

drivers/net/netdevsim/bus.c

379

pr_err("Device with ifindex %u in netnsfd %d is not a netdevsim\n",

drivers/net/netdevsim/bus.c

84

pr_err("The supplied perm_addr is not a valid MAC address\n");

drivers/net/netdevsim/bus.c

92

pr_err("Format for adding new port is \"id [perm_addr]\" (uint MAC).\n");

drivers/net/netdevsim/dev.c

115

pr_err("Failed to get snapshot id\n");

drivers/net/netdevsim/dev.c

1229

pr_err("%s rate value %lluBps not in link speed units of 1Mbps.\n",

drivers/net/netdevsim/dev.c

123

pr_err("Failed to create region snapshot\n");

drivers/net/netdevsim/dev.c

1236

pr_err("%s rate value %lluMbps exceed link maximum speed 5000Mbps.\n",

drivers/net/netdevsim/dev.c

462

pr_err("Failed to register IPv4 top resource\n");

drivers/net/netdevsim/dev.c

470

pr_err("Failed to register IPv4 FIB resource\n");

drivers/net/netdevsim/dev.c

478

pr_err("Failed to register IPv4 FIB rules resource\n");

drivers/net/netdevsim/dev.c

488

pr_err("Failed to register IPv6 top resource\n");

drivers/net/netdevsim/dev.c

496

pr_err("Failed to register IPv6 FIB resource\n");

drivers/net/netdevsim/dev.c

504

pr_err("Failed to register IPv6 FIB rules resource\n");

drivers/net/netdevsim/dev.c

514

pr_err("Failed to register NEXTHOPS resource\n");

drivers/net/netdevsim/dev.c

677

pr_err("Failed to initialize VF id=%d. %d.\n", i, err);

drivers/net/netdevsim/fib.c

1591

pr_err("Failed to register nexthop notifier\n");

drivers/net/netdevsim/fib.c

1599

pr_err("Failed to register fib notifier\n");

drivers/net/netdevsim/netdev.c

246

pr_err("Not supported in switchdev mode. Please use devlink API.\n");

drivers/net/ovpn/crypto_aead.c

257

pr_err("%s crypto_alloc_aead failed, err=%d\n", title, ret);

drivers/net/ovpn/crypto_aead.c

264

pr_err("%s crypto_aead_setkey size=%u failed, err=%d\n", title,

drivers/net/ovpn/crypto_aead.c

271

pr_err("%s crypto_aead_setauthsize failed, err=%d\n", title,

drivers/net/ovpn/crypto_aead.c

278

pr_err("%s IV size must be %d\n", title, OVPN_NONCE_SIZE);

drivers/net/ovpn/main.c

247

pr_err("ovpn: can't register rtnl link ops: %d\n", err);

drivers/net/ovpn/main.c

253

pr_err("ovpn: can't register netlink family: %d\n", err);

drivers/net/ovpn/netlink.c

1280

pr_err("ovpn: genl_register_family failed: %d\n", ret);

drivers/net/pfcp.c

281

pr_err("loading PFCP module failed: err %d\n", err);

drivers/net/phy/dp83640.c

189

pr_err("gpio_tab[%d]=%hu out of range", i, gpio_tab[i]);

drivers/net/phy/dp83640.c

631

pr_err("PHY calibration pin not available - PHY is not calibrated.");

drivers/net/phy/mdio_bus_provider.c

328

pr_err("mii_bus %s failed to register\n", bus->id);

drivers/net/phy/mdio_device.c

267

pr_err("%s: Error %d in registering driver\n",

drivers/net/phy/mdio_device.c

83

pr_err("MDIO %d failed to add\n", mdiodev->addr);

drivers/net/phy/phy_caps.c

88

pr_err("Pairs count must not be under min_pairs for linkmode %d\n",

drivers/net/phy/phy_caps.c

97

pr_err("Unknown speed %d, please update LINK_CAPS\n",

drivers/net/phy/phy_device.c

1274

pr_err("PHY %s not found\n", bus_id);

drivers/net/phy/phy_device.c

1922

pr_err("PHY %s not found\n", bus_id);

drivers/net/phy/phy_device.c

3845

pr_err("%s: features and get_features must not both be set\n",

drivers/net/phy/phy_device.c

3870

pr_err("%s: Error %d in registering driver\n",

drivers/net/phy/phy_port.c

78

pr_err("%u is not a valid number of pairs\n", pairs);

drivers/net/phy/phy_port.c

84

pr_err("pairs property is only compatible with BaseT medium\n");

drivers/net/ppp/ppp_generic.c

1412

pr_err("failed to register PPP pernet device (%d)\n", err);

drivers/net/ppp/ppp_generic.c

1418

pr_err("failed to register PPP device (%d)\n", err);

drivers/net/ppp/ppp_generic.c

1428

pr_err("failed to register rtnetlink PPP handler\n");

drivers/net/ppp/ppp_generic.c

3602

pr_err("ppp: destroying undead channel %p !\n", pch);

drivers/net/ppp/ppp_generic.c

3614

pr_err("PPP: removing module but units remain!\n");

drivers/net/ppp/ppp_generic.c

811

pr_err("PPP: not interface or channel??\n");

drivers/net/ppp/pptp.c

475

pr_err("PPTP: failed to register PPP channel (%d)\n", error);

drivers/net/ppp/pptp.c

662

pr_err("PPTP: can't add gre protocol\n");

drivers/net/ppp/pptp.c

668

pr_err("PPTP: can't register sk_proto\n");

drivers/net/ppp/pptp.c

674

pr_err("PPTP: can't register pppox_proto\n");

drivers/net/pse-pd/pse_core.c

108

pr_err("pse: amount of pairsets and pairset-names is not equal %d != %d (%pOF)\n",

drivers/net/pse-pd/pse_core.c

121

pr_err("pse: two PI pairsets can not have identical pinout (%pOF)",

drivers/net/pse-pd/pse_core.c

78

pr_err("pse: wrong pairset-names value %s (%pOF)\n",

drivers/net/pse-pd/tps23881.c

645

pr_err("tps23881: channel %d already used\n", ret);

drivers/net/pse-pd/tps23881.c

660

pr_err("tps23881: channel %d already used\n", ret);

drivers/net/pse-pd/tps23881.c

665

pr_err("tps23881: 4-pair PSE can only be set within the same 4 ports group");

drivers/net/pse-pd/tps23881.c

771

pr_err("tps23881: port matrix issue, no chan available\n");

drivers/net/pse-pd/tps23881.c

776

pr_err("tps23881: wrong number of channels\n");

drivers/net/pse-pd/tps23881.c

791

pr_err("tps23881: port matrix issue, no chan available\n");

drivers/net/pse-pd/tps23881.c

796

pr_err("tps23881: wrong number of channels\n");

drivers/net/rionet.c

616

pr_err("%s: error requesting doorbells\n", DRV_NAME);

drivers/net/rionet.c

725

pr_err("%s: failed to register reboot notifier (err=%d)\n",

drivers/net/rionet.c

732

pr_err("%s: class_interface_register error: %d\n",

drivers/net/tun.c

3669

pr_err("Can't register link_ops\n");

drivers/net/tun.c

3675

pr_err("Can't register misc device %d\n", TUN_MINOR);

drivers/net/tun.c

3681

pr_err("Can't register netdevice notifier\n");

drivers/net/usb/hso.c

1086

pr_err("%s: no tty structures", __func__);

drivers/net/usb/hso.c

1332

pr_err("%s: serial is NULL\n", __func__);

drivers/net/usb/hso.c

1753

pr_err("%s: Wrong arguments\n", __func__);

drivers/net/usb/hso.c

3254

pr_err("%s - tty_register_driver failed(%d)\n",

drivers/net/usb/hso.c

3262

pr_err("Could not register hso driver - error: %d\n", result);

drivers/net/usb/hso.c

628

pr_err("%s: no free serial devices in table\n", __func__);

drivers/net/wan/c101.c

307

pr_err("invalid IRQ value\n");

drivers/net/wan/c101.c

312

pr_err("invalid RAM value\n");

drivers/net/wan/c101.c

322

pr_err("unable to allocate memory\n");

drivers/net/wan/c101.c

328

pr_err("could not allocate IRQ\n");

drivers/net/wan/c101.c

335

pr_err("could not request RAM window\n");

drivers/net/wan/c101.c

342

pr_err("could not map I/O address\n");

drivers/net/wan/c101.c

416

pr_err("invalid hardware parameters\n");

drivers/net/wan/farsync.c

1194

pr_err("Frame received with 0 length. Card %d Port %d\n",

drivers/net/wan/farsync.c

1427

pr_err("Interrupt received for card %d in a non running state (%d)\n",

drivers/net/wan/farsync.c

1547

pr_err("intr: unknown card event %d. ignored\n", event);

drivers/net/wan/farsync.c

1569

pr_err("Bad shared memory version %d expected %d\n",

drivers/net/wan/farsync.c

1575

pr_err("Missing shared memory signature\n");

drivers/net/wan/farsync.c

1584

pr_err("Firmware initialisation failed. Card halted\n");

drivers/net/wan/farsync.c

1588

pr_err("Unknown firmware status 0x%x\n", i);

drivers/net/wan/farsync.c

2008

pr_err("Attempt to configure card %d in non-running state (%d)\n",

drivers/net/wan/farsync.c

2304

pr_err("Cannot register HDLC device for port %d (errno %d)\n",

drivers/net/wan/farsync.c

2369

pr_err("Failed to enable card. Err %d\n", -err);

drivers/net/wan/farsync.c

2375

pr_err("Failed to allocate regions. Err %d\n", -err);

drivers/net/wan/farsync.c

2385

pr_err("Physical memory remap failed\n");

drivers/net/wan/farsync.c

2391

pr_err("Control memory remap failed\n");

drivers/net/wan/farsync.c

2399

pr_err("Unable to register interrupt %d\n", card->irq);

drivers/net/wan/farsync.c

2427

pr_err("FarSync: out of memory\n");

drivers/net/wan/farsync.c

2476

pr_err("FarSync: too many cards\n");

drivers/net/wan/farsync.c

2492

pr_err("Could not allocate rx dma buffer\n");

drivers/net/wan/farsync.c

2500

pr_err("Could not allocate tx dma buffer\n");

drivers/net/wan/farsync.c

925

pr_err("Mailbox safety timeout\n");

drivers/net/wan/fsl_ucc_hdlc.c

1072

pr_err("%pOFn: failed to lookup pdev\n", np);

drivers/net/wan/fsl_ucc_hdlc.c

1217

pr_err("ucc_hdlc: unable to allocate memory\n");

drivers/net/wan/fsl_ucc_hdlc.c

1231

pr_err("ucc_hdlc: unable to register hdlc device\n");

drivers/net/wan/lapbether.c

209

pr_err("lapb_connect_request error: %d\n", err);

drivers/net/wan/lapbether.c

216

pr_err("lapb_disconnect_request err: %d\n", err);

drivers/net/wan/lapbether.c

226

pr_err("lapb_data_request error - %d\n", err);

drivers/net/wan/lapbether.c

330

pr_err("lapb_register error: %d\n", err);

drivers/net/wan/lapbether.c

352

pr_err("lapb_unregister error: %d\n", err);

drivers/net/wan/n2.c

329

pr_err("invalid I/O port value\n");

drivers/net/wan/n2.c

334

pr_err("invalid IRQ value\n");

drivers/net/wan/n2.c

339

pr_err("invalid RAM value\n");

drivers/net/wan/n2.c

350

pr_err("unable to allocate memory\n");

drivers/net/wan/n2.c

356

pr_err("I/O port region in use\n");

drivers/net/wan/n2.c

363

pr_err("could not allocate IRQ\n");

drivers/net/wan/n2.c

370

pr_err("could not request RAM window\n");

drivers/net/wan/n2.c

377

pr_err("ioremap() failed\n");

drivers/net/wan/n2.c

399

pr_err("invalid window size\n");

drivers/net/wan/n2.c

424

pr_err("RAM test failed\n");

drivers/net/wan/n2.c

523

pr_err("invalid hardware parameters\n");

drivers/net/wan/pc300too.c

314

pr_err("invalid card EEPROM parameters\n");

drivers/net/wan/pc300too.c

329

pr_err("ioremap() failed\n");

drivers/net/wan/pc300too.c

356

pr_err("unable to allocate memory\n");

drivers/net/wan/pc300too.c

405

pr_err("RAM test failed\n");

drivers/net/wan/pc300too.c

452

pr_err("unable to register hdlc device\n");

drivers/net/wan/pc300too.c

485

pr_err("Invalid PCI clock frequency\n");

drivers/net/wan/pc300too.c

489

pr_err("Invalid 'use_crystal_clock' value\n");

drivers/net/wan/pci200syn.c

294

pr_err("unable to allocate memory\n");

drivers/net/wan/pci200syn.c

302

pr_err("invalid card EEPROM parameters\n");

drivers/net/wan/pci200syn.c

317

pr_err("ioremap() failed\n");

drivers/net/wan/pci200syn.c

348

pr_err("RAM test failed\n");

drivers/net/wan/pci200syn.c

386

pr_err("unable to register hdlc device\n");

drivers/net/wan/pci200syn.c

415

pr_err("Invalid PCI clock frequency\n");

drivers/net/wan/wanxl.c

579

pr_err("No usable DMA configuration\n");

drivers/net/wan/wanxl.c

631

pr_err("No usable DMA configuration\n");

drivers/net/wan/wanxl.c

641

pr_err("ioremap() failed\n");

drivers/net/wan/wanxl.c

709

pr_err("ioremap() failed\n");

drivers/net/wan/wanxl.c

770

pr_err("%s: unable to allocate memory\n",

drivers/net/wan/wanxl.c

787

pr_err("%s: unable to register hdlc device\n",

drivers/net/wireguard/selftest/allowedips.c

271

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

277

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

292

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

297

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

319

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

324

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

336

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

341

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

363

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

369

pr_err("allowedips random self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

386

pr_err("allowedips random v4 self-test: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

391

pr_err("allowedips random v6 self-test: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

404

pr_err("allowedips random self-test removal: FAIL\n");

drivers/net/wireguard/selftest/allowedips.c

512

pr_err("allowedips self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/counter.c

15

pr_err("nonce counter self-test malloc: FAIL\n");

drivers/net/wireguard/selftest/counter.c

27

pr_err("nonce counter self-test %u: FAIL\n", \

drivers/net/wireguard/selftest/ratelimiter.c

220

pr_err("ratelimiter self-test %d: FAIL\n", test);

drivers/net/wireguard/socket.c

389

pr_err("%s: Could not create IPv4 socket\n", wg->dev->name);

drivers/net/wireguard/socket.c

403

pr_err("%s: Could not create IPv6 socket\n",

drivers/net/wireless/ath/ath11k/pci.c

1301

pr_err("failed to register ath11k pci driver: %d\n",

drivers/net/wireless/ath/ath12k/ahb.c

1187

pr_err("Driver already registered for id %d\n", device_id);

drivers/net/wireless/ath/ath12k/pci.c

1817

pr_err("Driver already registered for %d\n", device_id);

drivers/net/wireless/ath/ath12k/wifi7/pci.c

204

pr_err("Failed to register ath12k Wi-Fi 7 driver: %d\n",

drivers/net/wireless/ath/ath9k/htc_drv_init.c

1028

pr_err("No USB devices found, driver not installed\n");

drivers/net/wireless/ath/ath9k/htc_hst.c

533

pr_err("Failed to initialize the device\n");

drivers/net/wireless/ath/ath9k/init.c

1138

pr_err("No PCI devices found, driver not installed\n");

drivers/net/wireless/ath/ath9k/pci.c

899

pr_err("32-bit DMA not available\n");

drivers/net/wireless/ath/main.c

56

pr_err("skbuff alloc of size %u failed\n", len);

drivers/net/wireless/ath/regd.c

696

pr_err("Invalid EEPROM contents\n");

drivers/net/wireless/broadcom/b43/main.c

2236

pr_err("Unable to load firmware\n");

drivers/net/wireless/broadcom/b43/main.c

5631

pr_err("Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1\n");

drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c

472

pr_err("%s: %pV", func, &vaf);

drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c

27

pr_err("%s: %pV", func, &vaf);

drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c

1240

pr_err("%s: ieee80211_alloc_hw failed\n", __func__);

drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c

1252

pr_err("%s: brcms_attach failed!\n", __func__);

drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c

1273

pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,

drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c

1315

pr_err("%s: register returned %d\n", __func__, error);

drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c

5586

pr_err("unknown vendor id %04x\n", vendor);

drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c

5599

pr_err("unknown device id %04x\n", device);

drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c

5610

pr_err("unknown chip id %04x\n", chipinfo->id);

drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.c

5622

pr_err("unknown host type: %i\n", core->bus->hosttype);

drivers/net/wireless/intel/iwlegacy/3945-mac.c

3847

pr_err("Unable to register rate control algorithm: %d\n", ret);

drivers/net/wireless/intel/iwlegacy/3945-mac.c

3853

pr_err("Unable to initialize PCI module\n");

drivers/net/wireless/intel/iwlegacy/4965-mac.c

6808

pr_err("Unable to register rate control algorithm: %d\n", ret);

drivers/net/wireless/intel/iwlegacy/4965-mac.c

6814

pr_err("Unable to initialize PCI module\n");

drivers/net/wireless/intel/iwlwifi/dvm/main.c

1257

pr_err("%s: Cannot allocate network device\n",

drivers/net/wireless/intel/iwlwifi/dvm/main.c

1336

pr_err("Unsupported amsdu_size: %d\n",

drivers/net/wireless/intel/iwlwifi/dvm/main.c

2164

pr_err("Unable to register rate control algorithm: %d\n", ret);

drivers/net/wireless/intel/iwlwifi/dvm/main.c

2170

pr_err("Unable to register op_mode: %d\n", ret);

drivers/net/wireless/intel/iwlwifi/iwl-modparams.h

119

pr_err("%s: Unsupported amsdu_size: %d\n", KBUILD_MODNAME,

drivers/net/wireless/intel/iwlwifi/mei/main.c

1844

pr_err("Still had a netdev pointer set upon unregister\n");

drivers/net/wireless/intel/iwlwifi/mld/mld.c

43

pr_err("Unable to register MLD op_mode: %d\n", ret);

drivers/net/wireless/intel/iwlwifi/mvm/ops.c

59

pr_err("Unable to register rate control algorithm: %d\n", ret);

drivers/net/wireless/intel/iwlwifi/mvm/ops.c

65

pr_err("Unable to register MVM op_mode: %d\n", ret);

drivers/net/wireless/intel/iwlwifi/pcie/drv.c

1337

pr_err("Unable to initialize PCI module\n");

drivers/net/wireless/intel/iwlwifi/pcie/gen1_2/trans.c

4255

pr_err("No config found for PCI dev %04x/%04x, rev=0x%x, rfid=0x%x\n",

drivers/net/wireless/marvell/libertas/cfg.c

2185

pr_err("cannot register wiphy device\n");

drivers/net/wireless/marvell/libertas/cfg.c

2191

pr_err("cannot register network device\n");

drivers/net/wireless/marvell/libertas/if_sdio.c

1157

pr_err("unable to identify card model\n");

drivers/net/wireless/marvell/libertas/if_sdio.c

1201

pr_err("unknown card model 0x%x\n", card->model);

drivers/net/wireless/marvell/libertas/if_sdio.c

392

pr_err("problem fetching packet from firmware\n");

drivers/net/wireless/marvell/libertas/if_sdio.c

426

pr_err("error %d sending packet to firmware\n", ret);

drivers/net/wireless/marvell/libertas/if_sdio.c

531

pr_err("failed to load helper firmware\n");

drivers/net/wireless/marvell/libertas/if_sdio.c

663

pr_err("failed to load firmware\n");

drivers/net/wireless/marvell/libertas/if_sdio.c

675

pr_err("failed to find firmware (%d)\n", ret);

drivers/net/wireless/marvell/libertas/if_spi.c

1168

pr_err("can't get host irq line-- request_irq failed\n");

drivers/net/wireless/marvell/libertas/if_spi.c

305

pr_err("%s: timeout with val=%02x, target_mask=%02x, target=%02x\n",

drivers/net/wireless/marvell/libertas/if_spi.c

404

pr_err("Can't read bus mode register\n");

drivers/net/wireless/marvell/libertas/if_spi.c

527

pr_err("failed to load helper firmware (err=%d)\n", err);

drivers/net/wireless/marvell/libertas/if_spi.c

550

pr_err("timed out waiting for host_int_status\n");

drivers/net/wireless/marvell/libertas/if_spi.c

560

pr_err("firmware load device requested a larger transfer than we are prepared to handle (len = %d)\n",

drivers/net/wireless/marvell/libertas/if_spi.c

616

pr_err("Too many CRC errors encountered in firmware load.\n");

drivers/net/wireless/marvell/libertas/if_spi.c

645

pr_err("firmware load wants fewer bytes than we have to offer\n");

drivers/net/wireless/marvell/libertas/if_spi.c

652

pr_err("failed to confirm the firmware download\n");

drivers/net/wireless/marvell/libertas/if_spi.c

658

pr_err("failed to load firmware (err=%d)\n", err);

drivers/net/wireless/marvell/libertas/if_usb.c

173

pr_err("Download timed out\n");

drivers/net/wireless/marvell/libertas/if_usb.c

456

pr_err("No free skb\n");

drivers/net/wireless/marvell/libertas/if_usb.c

814

pr_err("firmware file format check FAIL\n");

drivers/net/wireless/marvell/libertas/if_usb.c

830

pr_err("failed to find firmware (%d)\n", ret);

drivers/net/wireless/marvell/libertas/main.c

779

pr_err("Out of memory allocating command buffers\n");

drivers/net/wireless/marvell/libertas/main.c

789

pr_err("Out of memory allocating event FIFO buffer\n");

drivers/net/wireless/marvell/libertas/main.c

834

pr_err("cfg80211 init failed\n");

drivers/net/wireless/marvell/libertas/main.c

844

pr_err("failed to initialize adapter structure\n");

drivers/net/wireless/marvell/libertas/main.c

980

pr_err("cannot register device\n");

drivers/net/wireless/marvell/libertas/mesh.c

1028

pr_err("cannot register mshX virtual interface\n");

drivers/net/wireless/marvell/libertas_tf/if_usb.c

122

pr_err("Download timed out\n");

drivers/net/wireless/marvell/libertas_tf/if_usb.c

422

pr_err("No free skb\n");

drivers/net/wireless/marvell/libertas_tf/if_usb.c

801

pr_err("firmware file format check FAIL\n");

drivers/net/wireless/marvell/libertas_tf/if_usb.c

823

pr_err("request_firmware() failed with %#x\n", ret);

drivers/net/wireless/marvell/libertas_tf/if_usb.c

824

pr_err("firmware %s not found\n", lbtf_fw_name);

drivers/net/wireless/marvell/libertas_tf/main.c

249

pr_err("TX error: %d", err);

drivers/net/wireless/marvell/mwifiex/cmdevt.c

551

pr_err("PREP_CMD: adapter is NULL\n");

drivers/net/wireless/marvell/mwifiex/main.c

1596

pr_err("Failed to bring up adapter: %d\n", ret);

drivers/net/wireless/marvell/mwifiex/main.c

1696

pr_err("%s: software init failed\n", __func__);

drivers/net/wireless/marvell/mwifiex/main.c

1739

pr_err("%s: failed to register mwifiex device\n", __func__);

drivers/net/wireless/marvell/mwifiex/main.c

1756

pr_err("%s: firmware init failed\n", __func__);

drivers/net/wireless/marvell/mwifiex/main.c

493

pr_err("%s: adapter is NULL\n", __func__);

drivers/net/wireless/marvell/mwifiex/pcie.c

2465

pr_err("info: %s: card=%p adapter=%p\n", __func__, card,

drivers/net/wireless/marvell/mwifiex/pcie.c

2947

pr_err("dma_set_mask(32) failed: %d\n", ret);

drivers/net/wireless/marvell/mwifiex/pcie.c

2953

pr_err("req_reg(0) error\n");

drivers/net/wireless/marvell/mwifiex/pcie.c

2958

pr_err("iomap(0) error\n");

drivers/net/wireless/marvell/mwifiex/pcie.c

2964

pr_err("req_reg(2) error\n");

drivers/net/wireless/marvell/mwifiex/pcie.c

2969

pr_err("iomap(2) error\n");

drivers/net/wireless/marvell/mwifiex/pcie.c

3093

pr_err("request_irq failed: ret=%d\n", ret);

drivers/net/wireless/marvell/mwifiex/pcie.c

417

pr_err("%s failed\n", __func__);

drivers/net/wireless/marvell/mwifiex/sdio.c

1347

pr_err("int: func=%p card=%p adapter=%p\n",

drivers/net/wireless/marvell/mwifiex/tdls.c

1424

pr_err("mwifiex: %s: adapter or private structure is NULL\n",

drivers/net/wireless/marvell/mwifiex/usb.c

162

pr_err("mwifiex adapter or card structure is not valid\n");

drivers/net/wireless/marvell/mwifiex/usb.c

518

pr_err("%s: mwifiex_add_card failed: %d\n", __func__, ret);

drivers/net/wireless/microchip/wilc1000/cfg80211.c

1567

pr_err("Reached maximum number of interface\n");

drivers/net/wireless/microchip/wilc1000/hif.c

1029

pr_err("Failed to send wowlan trigger config packet\n");

drivers/net/wireless/microchip/wilc1000/netdev.c

37

pr_err("Can't handle UH interrupt\n");

drivers/net/wireless/microchip/wilc1000/netdev.c

48

pr_err("Can't handle BH interrupt\n");

drivers/net/wireless/microchip/wilc1000/sdio.c

195

pr_err("Can not retrieve MAC address from chip\n");

drivers/net/wireless/microchip/wilc1000/spi.c

258

pr_err("Can not retrieve MAC address from chip\n");

drivers/net/wireless/microchip/wilc1000/wlan.c

1275

pr_err("%s: Failed to reset\n", __func__);

drivers/net/wireless/microchip/wilc1000/wlan.c

1307

pr_err("%s Bus error\n", __func__);

drivers/net/wireless/microchip/wilc1000/wlan.c

1705

pr_err("Can not read address %d lower part", i);

drivers/net/wireless/microchip/wilc1000/wlan.c

1712

pr_err("Can not read address %d upper part", i);

drivers/net/wireless/microchip/wilc1000/wlan.c

679

pr_err("Bus error %d %x\n", ret, clk_status_val);

drivers/net/wireless/microchip/wilc1000/wlan.c

688

pr_err("Failed to wake-up the chip\n");

drivers/net/wireless/purelifi/plfxlc/usb.c

80

pr_err("urb is NULL\n");

drivers/net/wireless/purelifi/plfxlc/usb.c

84

pr_err("urb ctx is NULL\n");

drivers/net/wireless/purelifi/plfxlc/usb.c

874

pr_err("%s usb_register() failed %d\n", driver.name, r);

drivers/net/wireless/purelifi/plfxlc/usb.c

90

pr_err("usb is not initialized\n");

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

1055

pr_err("MAC%u: failed to update region to %c%c: %d\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

1066

pr_err("MAC%u: failed to update band %u\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

1131

pr_err("invalid wiphy pointer\n");

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

116

pr_err("MAC%u invalid combination: AP as primary repeater interface is not supported\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

1250

pr_err("failed to send %s command to VIF%u.%u\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

136

pr_err("VIF%u.%u combination check: failed to set type %d\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

150

pr_err("VIF%u.%u: failed to change type to %d\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

186

pr_err("VIF%u.%u: failed to delete VIF\n", vif->mac->macid,

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

215

pr_err("MAC%u invalid combination: failed to add type %d\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

225

pr_err("MAC%u: no free VIF available\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

237

pr_err("MAC%u: unsupported IF type %d\n", mac->macid, type);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

248

pr_err("VIF%u.%u: failed to add VIF %pM\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

254

pr_err("VIF%u.%u: FW reported bad MAC: %pM\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

262

pr_err("VIF%u.%u: failed to attach netdev\n", mac->macid,

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

349

pr_err("VIF%u.%u: failed to start AP\n", vif->mac->macid,

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

365

pr_err("VIF%u.%u: failed to stop AP operation in FW\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

382

pr_err("MAC%u: primary VIF is not configured\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

388

pr_err("MAC%u: failed to update PHY params\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

544

pr_err("VIF%u.%u: failed to add key: cipher=%x idx=%u pw=%u\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

564

pr_err("VIF%u.%u: failed to delete key: idx=%u pw=%u\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

582

pr_err("VIF%u.%u: failed to set dflt key: idx=%u uc=%u mc=%u\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

598

pr_err("VIF%u.%u: failed to set default MGMT key: idx=%u\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

613

pr_err("VIF%u.%u: failed to change STA %pM\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

634

pr_err("VIF%u.%u: failed to delete STA %pM\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

652

pr_err("MAC%u: failed to start scan\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

677

pr_err("can not offload authentication to userspace\n");

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

688

pr_err("VIF%u.%u: failed to connect\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

707

pr_err("VIF%u.%u: failed to report external auth\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

723

pr_err("MAC%u: primary VIF is not configured\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

732

pr_err("VIF%u.%u: failed to disconnect\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

797

pr_err("%s: failed to get channel: %d\n", ndev->name, ret);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

803

pr_err("%s: bad channel freq=%u cf1=%u cf2=%u bw=%u\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

826

pr_err("%s: invalid channel\n", dev->name);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

851

pr_err("%s: failed to start CAC ret=%d\n", ndev->name, ret);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

865

pr_err("%s: failed to set mac ACL ret=%d\n", dev->name, ret);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

879

pr_err("%s: failed to set PM mode ret=%d\n", dev->name, ret);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

892

pr_err("MAC%u: failed to get Tx power\n", vif->mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

911

pr_err("MAC%u: primary VIF is not configured\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

919

pr_err("MAC%u: failed to set Tx power\n", vif->mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

935

pr_err("VIF%u.%u: failed to update owe info\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

950

pr_err("MAC%u: primary VIF is not configured\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

965

pr_err("MAC%u: failed to set WoWLAN triggers\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

982

pr_err("MAC%u: primary VIF is not configured\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

988

pr_err("MAC%u: failed to reset WoWLAN triggers\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1168

pr_err("Malformed TLV buffer\n");

drivers/net/wireless/quantenna/qtnfmac/commands.c

1173

pr_err("MAC%u: combination mismatch: reported=%zu parsed=%zu\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1179

pr_err("MAC%u: ext_capa/_mask lengths mismatch: %u != %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1232

pr_err("could not get valid base vif\n");

drivers/net/wireless/quantenna/qtnfmac/commands.c

1331

pr_err("bad IFTYPE_DATA TLV len %u\n", tlv->hdr.len);

drivers/net/wireless/quantenna/qtnfmac/commands.c

1401

pr_err("invalid channel TLV len %zu\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1407

pr_err("too many channel TLVs\n");

drivers/net/wireless/quantenna/qtnfmac/commands.c

1479

pr_err("bad HTCAP TLV len %zu\n", tlv_dlen);

drivers/net/wireless/quantenna/qtnfmac/commands.c

1488

pr_err("bad VHTCAP TLV len %zu\n", tlv_dlen);

drivers/net/wireless/quantenna/qtnfmac/commands.c

1508

pr_err("Malformed TLV buffer\n");

drivers/net/wireless/quantenna/qtnfmac/commands.c

1513

pr_err("channel count mismatch: reported=%d, parsed=%d\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

157

pr_err("VIF%u.%u CMD %u: alloc failed\n", macid, vifid, cmd_no);

drivers/net/wireless/quantenna/qtnfmac/commands.c

1617

pr_err("MAC%u: reply band %u != cmd band %u\n", mac->macid,

drivers/net/wireless/quantenna/qtnfmac/commands.c

1897

pr_err("unsupported iftype %d\n", vif->wdev.iftype);

drivers/net/wireless/quantenna/qtnfmac/commands.c

214

pr_err("VIF%u.%u: can not fit AP settings: %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

2356

pr_err("Malformed TLV buffer\n");

drivers/net/wireless/quantenna/qtnfmac/commands.c

2436

pr_err("[MAC%u] channel stats freq %u != requested %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

2729

pr_err("[VIF%u.%u] failed to set broadcast domain\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

611

pr_err("Malformed TLV buffer\n");

drivers/net/wireless/quantenna/qtnfmac/commands.c

730

pr_err("VIF%u.%u: wrong mac in reply: %pM != %pM\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

775

pr_err("VIF%u.%u: unsupported type %d\n", vif->mac->macid,

drivers/net/wireless/quantenna/qtnfmac/commands.c

942

pr_err("Malformed TLV buffer\n");

drivers/net/wireless/quantenna/qtnfmac/core.c

156

pr_err("Tx timeout threshold exceeded !\n");

drivers/net/wireless/quantenna/qtnfmac/core.c

157

pr_err("schedule interface %s reset !\n", netdev_name(ndev));

drivers/net/wireless/quantenna/qtnfmac/core.c

223

pr_err("MAC%u: band %u: failed to get chans info: %d\n",

drivers/net/wireless/quantenna/qtnfmac/core.c

45

pr_err("invalid MAC index %u\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

53

pr_err("MAC%u: not initialized\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

557

pr_err("MAC%u allocation failed\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

563

pr_err("MAC%u: primary VIF is not ready\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

571

pr_err("MAC%u: failed to add VIF\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

577

pr_err("MAC%u: failed to get MAC info\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

587

pr_err("MAC%u: failed to init bands\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

593

pr_err("MAC%u: wiphy registration failed\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

606

pr_err("MAC%u: failed to attach netdev\n", macid);

drivers/net/wireless/quantenna/qtnfmac/core.c

712

pr_err("failed to alloc main workqueue\n");

drivers/net/wireless/quantenna/qtnfmac/core.c

720

pr_err("failed to alloc high prio workqueue\n");

drivers/net/wireless/quantenna/qtnfmac/core.c

729

pr_err("failed to init FW: %d\n", ret);

drivers/net/wireless/quantenna/qtnfmac/core.c

735

pr_err("qlink driver vs FW version mismatch: %u vs %u\n",

drivers/net/wireless/quantenna/qtnfmac/core.c

745

pr_err("failed to get HW info: %d\n", ret);

drivers/net/wireless/quantenna/qtnfmac/core.c

754

pr_err("no support for number of MACs=%u\n",

drivers/net/wireless/quantenna/qtnfmac/core.c

764

pr_err("MAC%u: attach failed: %d\n", i, ret);

drivers/net/wireless/quantenna/qtnfmac/core.c

772

pr_err("failed to register netdev notifier: %d\n", ret);

drivers/net/wireless/quantenna/qtnfmac/event.c

110

pr_err("VIF%u.%u: payload is too short (%u < %zu)\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

117

pr_err("VIF%u.%u: STA_DEAUTH event when not in AP mode\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

153

pr_err("VIF%u.%u: payload is too short (%u < %zu)\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

160

pr_err("VIF%u.%u: BSS_JOIN event when not in STA mode\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

289

pr_err("VIF%u.%u: payload is too short (%u < %zu)\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

296

pr_err("VIF%u.%u: BSS_LEAVE event when not in STA mode\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

322

pr_err("VIF%u.%u: payload is too short (%u < %zu)\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

33

pr_err("VIF%u.%u: payload is too short (%u < %zu)\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

356

pr_err("VIF%u.%u: payload is too short\n", vif->mac->macid,

drivers/net/wireless/quantenna/qtnfmac/event.c

363

pr_err("VIF%u.%u: channel at %u MHz not found\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

39

pr_err("VIF%u.%u: STA_ASSOC event when not in AP mode\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

426

pr_err("MAC%u: payload is too short\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/event.c

446

pr_err("MAC%u: payload is too short\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/event.c

456

pr_err("MAC%u: bad channel freq=%u cf1=%u cf2=%u bw=%u\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

496

pr_err("MAC%u: payload is too short\n", vif->mac->macid);

drivers/net/wireless/quantenna/qtnfmac/event.c

506

pr_err("MAC%u: bad channel f1=%u f2=%u bw=%u\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

566

pr_err("MAC%u: payload is too short\n", vif->mac->macid);

drivers/net/wireless/quantenna/qtnfmac/event.c

604

pr_err("VIF%u.%u: payload is too short (%u < %zu)\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

614

pr_err("VIF%u.%u: MIC_FAILURE event when not in STA mode\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

642

pr_err("VIF%u.%u: payload is too short (%u < %zu)\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

652

pr_err("VIF%u.%u: UPDATE_OWE event when not in AP mode\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

691

pr_err("invalid vif(%u)\n", event->vifid);

drivers/net/wireless/quantenna/qtnfmac/event.c

764

pr_err("invalid event buffer\n");

drivers/net/wireless/quantenna/qtnfmac/event.c

88

pr_err("Malformed TLV buffer\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

140

pr_err("failed to attach core\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

180

pr_err("failed to set mps to %d, keep using current %d\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

249

pr_err("failed to allocate skb\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

285

pr_err("device %s is not PCI Express\n", pci_name(pdev));

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

293

pr_err("failed to init PCI device %x\n", pdev->device);

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

301

pr_err("failed to map BAR%u\n", QTN_SYSCTL_BAR);

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

307

pr_err("failed to map BAR%u\n", QTN_DMA_BAR);

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

313

pr_err("failed to map BAR%u\n", QTN_SHMEM_BAR);

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

331

pr_err("unsupported chip ID 0x%x\n", chipid);

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

363

pr_err("failed to alloc bus workqueue\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

370

pr_err("PCIE DMA coherent mask init failed 0x%llx\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

58

pr_err("EP firmware is dead\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

1036

pr_err("failed to get firmware %s\n", fwname);

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

1045

pr_err("card is not ready\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

1064

pr_err("firmware upload error\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

1071

pr_err("firmware bringup timed out\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

1077

pr_err("firmware runtime failure\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

1129

pr_err("PCIE xfer init failed\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

1143

pr_err("failed to request pcie irq %d\n", pdev->irq);

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

301

pr_err("skb DMA mapping error: %pad\n", &paddr);

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

439

pr_err("failed to init h/w queues\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

445

pr_err("failed to allocate skb array\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

451

pr_err("failed to allocate bd table\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

457

pr_err("failed to allocate rx buffers\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

565

pr_err("skb DMA mapping error: %pad\n", &skb_paddr);

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

743

pr_err("skip packet with invalid length: %u > %u\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

789

pr_err("failed to allocate new rx_skb[%d]\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

968

pr_err("FW upload failed: too many retries\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

983

pr_err("FW upload failed: SYNC timed out\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1013

pr_err("%s: card is not ready\n", fwname);

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1021

pr_err("%s: request_firmware error %d\n", fwname, ret);

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1029

pr_err("%s: FW upload error\n", fwname);

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1075

pr_err("FW bringup timed out\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1084

pr_err("card bringup timed out\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1091

pr_err("FW runtime failure\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1143

pr_err("failed to request pcie irq %d\n", pdev->irq);

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1151

pr_err("failed to init card\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

1157

pr_err("PCIE xfer init failed\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

261

pr_err("skb mapping error: %pad\n", &paddr);

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

372

pr_err("failed to allocate skb array\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

378

pr_err("failed to allocate bd table\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

384

pr_err("failed to allocate rx buffers\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

649

pr_err("skip packet with invalid length: %u > %u\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

701

pr_err("failed to allocate new rx_skb[%d]\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

829

pr_err("card endianness detection timed out\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

859

pr_err("failed to detect card endianness\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

879

pr_err("card is not ready to boot...\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

934

pr_err("failed to allocate DMA buffer for FW upload\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

945

pr_err("card is not ready to download FW\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

964

pr_err("confirmation for block #%d timed out\n", count);

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

980

pr_err("confirmation for the last block timed out\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

989

pr_err("confirmation for FW upload completion timed out\n");

drivers/net/wireless/quantenna/qtnfmac/shm_ipc.c

155

pr_err("TX ACK timeout\n");

drivers/net/wireless/quantenna/qtnfmac/shm_ipc.c

30

pr_err("wrong rx packet size: %zu\n", size);

drivers/net/wireless/quantenna/qtnfmac/trans.c

161

pr_err("invalid bus pointer\n");

drivers/net/wireless/quantenna/qtnfmac/trans.c

57

pr_err("response timeout\n");

drivers/net/wireless/quantenna/qtnfmac/trans.c

90

pr_err("unexpected response\n");

drivers/net/wireless/quantenna/qtnfmac/trans.c

95

pr_err("seq num mismatch\n");

drivers/net/wireless/realtek/rtlwifi/base.c

2191

pr_err("AP off, try to reconnect now\n");

drivers/net/wireless/realtek/rtlwifi/base.c

2502

pr_err("Unknown Scan Backup operation.\n");

drivers/net/wireless/realtek/rtlwifi/base.c

2714

pr_err("rtl: Unable to register rtl_rc, use default RC !!\n");

drivers/net/wireless/realtek/rtlwifi/base.c

369

pr_err("Err BAND %d\n",

drivers/net/wireless/realtek/rtlwifi/base.c

541

pr_err("REGD init failed\n");

drivers/net/wireless/realtek/rtlwifi/cam.c

266

pr_err("sta_addr is NULL.\n");

drivers/net/wireless/realtek/rtlwifi/cam.c

278

pr_err("-----hwsec_cam_bitmap: 0x%x entry_idx=%d\n",

drivers/net/wireless/realtek/rtlwifi/cam.c

298

pr_err("sta_addr is NULL.\n");

drivers/net/wireless/realtek/rtlwifi/cam.c

303

pr_err("sta_addr is %pM\n", sta_addr);

drivers/net/wireless/realtek/rtlwifi/core.c

1404

pr_err("IEEE80211_AMPDU_ERR!!!!:\n");

drivers/net/wireless/realtek/rtlwifi/core.c

1546

pr_err("alg_err:%x!!!!:\n", key->cipher);

drivers/net/wireless/realtek/rtlwifi/core.c

1673

pr_err("cmd_err:%x!!!!:\n", cmd);

drivers/net/wireless/realtek/rtlwifi/core.c

280

pr_err("operation mode %d is not supported!\n",

drivers/net/wireless/realtek/rtlwifi/core.c

730

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/core.c

80

pr_err("Selected firmware is not available\n");

drivers/net/wireless/realtek/rtlwifi/core.c

86

pr_err("Firmware is too big!\n");

drivers/net/wireless/realtek/rtlwifi/efuse.c

1237

pr_err("RTL8XXX did not boot from eeprom, check it !!\n");

drivers/net/wireless/realtek/rtlwifi/pci.c

1157

pr_err("Cannot allocate TX ring (prio = %d)\n",

drivers/net/wireless/realtek/rtlwifi/pci.c

1174

pr_err("Cannot allocate TX ring (prio = %d)\n", prio);

drivers/net/wireless/realtek/rtlwifi/pci.c

1220

pr_err("Cannot allocate RX ring\n");

drivers/net/wireless/realtek/rtlwifi/pci.c

1243

pr_err("Cannot allocate RX ring\n");

drivers/net/wireless/realtek/rtlwifi/pci.c

145

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/pci.c

1688

pr_err("tx ring initialization failed\n");

drivers/net/wireless/realtek/rtlwifi/pci.c

2185

pr_err("Can't init_sw_vars\n");

drivers/net/wireless/realtek/rtlwifi/pci.c

2197

pr_err("Can't allocate sw for mac80211\n");

drivers/net/wireless/realtek/rtlwifi/pci.c

2204

pr_err("Failed to init PCI\n");

drivers/net/wireless/realtek/rtlwifi/pci.c

2210

pr_err("Can't register mac80211 hw.\n");

drivers/net/wireless/realtek/rtlwifi/ps.c

136

pr_err("switch case %#x not processed\n", state_toset);

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c

100

pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c

149

pr_err("Firmware is not ready to run!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c

218

pr_err("Write H2C fail because no trigger for FW INT!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c

51

pr_err("Page numbers should not greater then 8\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/fw.c

79

pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n",

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c

1226

pr_err("Network type %d not support!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c

1958

pr_err("Autoload ERR!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c

2323

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c

2342

pr_err("Can not find free hw security cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c

346

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c

554

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c

718

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c

739

pr_err("Failed to polling write LLT done at address %d!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

1057

pr_err("Unknown Scan Backup operation.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

1098

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

1123

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

1264

pr_err("Invalid 'stage' = %d, Check it!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

154

pr_err("return all one\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

198

pr_err("stop\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

340

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

350

pr_err("BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c

356

pr_err("AGC Table Fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8188ee/rf.c

32

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c

102

pr_err("chksum report fail! REG_MCUFWDL:0x%08x .\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c

122

pr_err("Polling FW ready fail! REG_MCUFWDL:0x%08x.\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c

163

pr_err("Firmware is not ready to run!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c

234

pr_err("Write H2C fail because no trigger for FW INT!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192c/fw_common.c

70

pr_err("Page numbers should not greater then 4\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c

133

pr_err("stop\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c

178

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c

191

pr_err("BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c

197

pr_err("AGC Table Fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c

830

pr_err("Invalid 'stage' = %d, Check it!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c

85

pr_err("return all one\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

1116

pr_err("ERROR RF_Type is set!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

1165

pr_err("Network type %d not supported!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

121

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

1741

pr_err("Autoload ERR!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

2112

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

2131

pr_err("Can not find free hw security cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

341

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

528

pr_err("switch case %d not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

549

pr_err("Failed to polling write LLT done at address %d!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c

937

pr_err("Init MAC failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/led.c

30

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c

345

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c

496

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c

32

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c

132

pr_err("Can't alloc buffer for fw\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c

151

pr_err("Failed to request firmware!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

1232

pr_err("Network type %d not supported!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

1448

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

1800

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

421

pr_err("Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

454

pr_err("Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

750

pr_err("Failed to init power on!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

754

pr_err("Failed to init LLT Table!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

876

pr_err("init mac failed!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

991

pr_err("8051 reset failed!.........................\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c

28

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c

58

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

138

pr_err("Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

162

pr_err("===> %s #1 fail\n", __func__);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

169

pr_err("===> %s #2 fail\n", __func__);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

180

pr_err("===> %s #3 fail\n", __func__);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

187

pr_err("===> %s #4 fail\n", __func__);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

243

pr_err("illegal switch case\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

260

pr_err("Can not find free hw security cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c

255

pr_err("switch case %#x not processed\n", rfpath);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c

294

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c

316

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c

489

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c

32

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c

45

pr_err("Can't alloc buffer for fw\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192d/fw_common.c

266

pr_err("Write H2C fail because no trigger for FW INT!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192d/fw_common.c

272

pr_err("boxnum %#x too big\n", boxnum);

drivers/net/wireless/realtek/rtlwifi/rtl8192d/fw_common.c

343

pr_err("switch case %#x not processed\n", cmd_len);

drivers/net/wireless/realtek/rtlwifi/rtl8192d/fw_common.c

60

pr_err("Page numbers should not greater then 8\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192d/fw_common.c

88

pr_err("chksum report fail! REG_MCUFWDL:0x%08x\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c

1152

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c

1168

pr_err("Can not find free hw security cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c

282

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c

302

pr_err("Failed to polling write LLT done at address %d!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c

673

pr_err("Unknown CUT!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c

765

pr_err("Autoload ERR!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c

96

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8192d/phy_common.c

658

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192d/phy_common.c

691

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192d/rf_common.c

44

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c

106

pr_err("fw is not ready to run!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c

133

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c

604

pr_err("Init MAC failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c

780

pr_err("Network type %d not supported!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c

39

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8192de/led.c

71

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c

2182

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c

2444

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c

391

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c

406

pr_err("BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c

412

pr_err("AGC Table Fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c

508

pr_err("switch case %#x not processed\n", rfpath);

drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c

552

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c

584

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c

152

pr_err("Can't alloc buffer for fw\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c

165

pr_err("Failed to request firmware!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192du/fw.c

59

pr_err("fw is not ready to run!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c

621

pr_err("Failed to init power on!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c

650

pr_err("Init MAC failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c

661

pr_err("Init LLT failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c

925

pr_err("Network type %d not supported!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8192du/hw.c

99

pr_err("%s:%d switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c

2684

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c

357

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c

366

pr_err("BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c

372

pr_err("AGC Table Fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c

500

pr_err("switch case %#x not processed\n", rfpath);

drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c

549

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192du/phy.c

579

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192du/sw.c

160

pr_err("Failed to request firmware!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c

47

pr_err("Page numbers should not greater then 8\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c

76

pr_err("chksum report fail! REG_MCUFWDL:0x%08x\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/fw.c

97

pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x. count = %d\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c

1319

pr_err("Init MAC failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c

1483

pr_err("Network type %d not support!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c

2209

pr_err("Autoload ERR!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c

2488

pr_err("Can not find free hw security cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

148

pr_err("return all one\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

1641

pr_err("Unknown Scan Backup operation.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

1682

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

1707

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

1849

pr_err("Invalid 'stage' = %d, Check it!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

191

pr_err("stop\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

616

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

628

pr_err("BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c

633

pr_err("AGC Table Fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/rf.c

36

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c

141

pr_err("Can't alloc buffer for fw\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c

154

pr_err("Failed to request firmware!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

147

pr_err("Size over FIRMWARE_CODE_SIZE!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

214

pr_err("FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

231

pr_err("FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

239

pr_err("Enable CPU fail!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

254

pr_err("Polling DMEM code done fail ! cpustatus(%#x)\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

279

pr_err("Polling Load Firmware ready fail ! cpustatus(%x)\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

301

pr_err("Unknown status check!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

349

pr_err("memory for data image is less than IMEM required\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

361

pr_err("memory for data image is less than EMEM required\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

395

pr_err("Unexpected Download step!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

404

pr_err("fail!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

411

pr_err("rtl8192se: firmware fail!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

94

pr_err("Unknown RF type(%x)\n", rtlphy->rf_type);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

1168

pr_err("Network type %d not supported!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

1282

pr_err("wait for BIT(6) return value %x\n", tmp);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

1341

pr_err("Switch ctrl path fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

1648

pr_err("RTL819X Not boot from eeprom, check it !!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

1992

pr_err("Autoload ERR!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

2425

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

2443

pr_err("Can not find free hw security cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

273

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

409

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

472

pr_err("wait for BIT(6) return value %x\n", tmpvalue);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

57

pr_err("switch case %#x not processed\n", variable);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

722

pr_err("Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

978

pr_err("MAC Config failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

998

pr_err("BB Config failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c

29

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c

62

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

1037

pr_err("RF_Type(%x) does not match RF_Num(%x)!!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

1039

pr_err("path1 0x%x, path2 0x%x, pathmap 0x%x\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

1179

pr_err("Set FW Cmd fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

212

pr_err("Unknown operation\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

252

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

277

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

401

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

606

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

899

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

912

pr_err("_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

920

pr_err("%s(): AGC Table Fail\n", __func__);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c

473

pr_err("Radio[%d] Fail!!\n", rfpath);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c

504

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c

192

pr_err("Failed to request firmware!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c

68

pr_err("Firmware %s not available\n", fw_name);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c

73

pr_err("Firmware is too big!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c

103

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c

209

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c

80

pr_err("Write H2C fail because no trigger for FW INT!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c

1079

pr_err("Chip Version ID: Unknown. Bug?\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c

1128

pr_err("Network type %d not support!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c

1812

pr_err("Autoload ERR!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c

2204

pr_err("Can not find free hw security cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c

546

pr_err("Failed to polling write LLT done at address %d!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c

933

pr_err("Init MAC failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c

31

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c

70

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

192

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

206

pr_err("BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

212

pr_err("AGC Table Fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

722

pr_err("Unknown Scan Backup operation.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

763

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

788

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

949

pr_err("Invalid 'stage' = %d, Check it!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c

32

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c

144

pr_err("Can't alloc buffer for fw.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c

157

pr_err("Failed to request firmware!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c

101

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c

174

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723be/fw.c

78

pr_err("Write H2C fail because no trigger for FW INT!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c

1365

pr_err("Init MAC failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c

1516

pr_err("Network type %d not support!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c

2272

pr_err("Autoload ERR!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c

2607

pr_err("Can not find free hw security cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c

727

pr_err("Failed to polling write LLT done at address %d!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c

30

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8723be/led.c

69

pr_err("switch case %#x not processed\n", pin);

drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c

1181

pr_err("Unknown Scan Backup operation.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c

1222

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c

1247

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c

1393

pr_err("Invalid 'stage' = %d, Check it!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c

510

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c

521

pr_err("BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c

527

pr_err("AGC Table Fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/rf.c

32

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c

151

pr_err("Can't alloc buffer for fw.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c

161

pr_err("Failed to request firmware!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c

131

pr_err("chksum report fail ! REG_MCUFWDL:0x%08x .\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c

157

pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c

213

pr_err("Firmware is not ready to run!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c

52

pr_err("Page numbers should not greater than %d\n",

drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c

114

pr_err("stop\n");

drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c

68

pr_err("return all one\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c

50

pr_err("Page numbers should not greater then 8\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c

99

pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c

1897

pr_err("Init MAC failed\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c

2144

pr_err("Network type %d not support!\n", type);

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c

3244

pr_err("Autoload ERR!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c

3848

pr_err("an not find free hwsecurity cam entry\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c

802

pr_err("Failed to polling write LLT done at address %d!\n",

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

1793

pr_err("Write BB Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

1802

pr_err("BB_PG Reg Fail!!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

1816

pr_err("AGC Table Fail\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

200

pr_err("return all one\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

2072

pr_err("switch case %#x not processed\n", rfpath);

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

2099

pr_err("switch case %#x not processed\n", rfpath);

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

261

pr_err("stop\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

3302

pr_err("Unknown Scan Backup operation.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

3343

pr_err("SCMapping: Not Correct Primary40MHz Setting\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

3358

pr_err("SCMapping: Not Correct Primary40MHz Setting\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

3365

pr_err("SCMapping: Not Correct Primary40MHz Setting\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

3441

pr_err("unknown bandwidth: %#X\n",

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

4617

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

4661

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c

4766

pr_err("switch case %#x not processed\n",

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c

29

pr_err("unknown bandwidth: %#X\n", bandwidth);

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c

164

pr_err("Can't alloc buffer for fw.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c

169

pr_err("Can't alloc buffer for wowlan fw.\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c

190

pr_err("Failed to request normal firmware!\n");

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c

202

pr_err("Failed to request wowlan firmware!\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

1014

pr_err("Can't allocate sw for mac80211\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

1018

pr_err("Can't init_sw_vars\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

1025

pr_err("Can't register mac80211 hw.\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

285

pr_err("No output end points found\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

357

pr_err("Failed to usb_alloc_coherent!!\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

497

pr_err("rx agg not supported\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

555

pr_err("Too short packet from bulk IN! (len: %d)\n",

drivers/net/wireless/realtek/rtlwifi/usb.c

562

pr_err("Pending RX skbuff queue full! (qlen: %d)\n",

drivers/net/wireless/realtek/rtlwifi/usb.c

572

pr_err("Can't allocate skb for bulk IN!\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

660

pr_err("Failed to prep_rx_urb!!\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

780

pr_err("Failed to submit urb\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

801

pr_err("Urb has error status 0x%X\n", urb->status);

drivers/net/wireless/realtek/rtlwifi/usb.c

853

pr_err("USB device is stopping...\n");

drivers/net/wireless/realtek/rtlwifi/usb.c

860

pr_err("Can't allocate urb. Drop skb!\n");

drivers/net/wireless/st/cw1200/bh.c

115

pr_err("[BH] wakeup failed (BH error)\n");

drivers/net/wireless/st/cw1200/bh.c

184

pr_err("[BH] Failed to read control register.\n");

drivers/net/wireless/st/cw1200/bh.c

284

pr_err("rx blew up, len %zu\n", alloc_len);

drivers/net/wireless/st/cw1200/bh.c

390

pr_err("tx blew up, len %zu\n", tx_len);

drivers/net/wireless/st/cw1200/bh.c

603

pr_err("[BH] Fatal error, exiting.\n");

drivers/net/wireless/st/cw1200/cw1200_sdio.c

205

pr_err("could not get CW1200 SDIO reset GPIO\n");

drivers/net/wireless/st/cw1200/cw1200_sdio.c

211

pr_err("could not get CW1200 SDIO powerup GPIO\n");

drivers/net/wireless/st/cw1200/cw1200_sdio.c

222

pr_err("power_ctrl() failed!\n");

drivers/net/wireless/st/cw1200/cw1200_sdio.c

230

pr_err("clk_ctrl() failed!\n");

drivers/net/wireless/st/cw1200/cw1200_sdio.c

292

pr_err("Can't allocate SDIO hwbus_priv.\n");

drivers/net/wireless/st/cw1200/cw1200_sdio.c

359

pr_err("Error setting SDIO pm flags: %i\n", ret);

drivers/net/wireless/st/cw1200/cw1200_spi.c

307

pr_err("power_ctrl() failed!\n");

drivers/net/wireless/st/cw1200/cw1200_spi.c

315

pr_err("clk_ctrl() failed!\n");

drivers/net/wireless/st/cw1200/cw1200_spi.c

382

pr_err("Can't allocate SPI hwbus_priv.");

drivers/net/wireless/st/cw1200/cw1200_spi.c

400

pr_err("spi_on() failed!\n");

drivers/net/wireless/st/cw1200/cw1200_spi.c

405

pr_err("spi_setup() failed!\n");

drivers/net/wireless/st/cw1200/fwio.c

120

pr_err("Invalid silicon revision %d.\n", priv->hw_revision);

drivers/net/wireless/st/cw1200/fwio.c

147

pr_err("Can't load firmware file %s.\n", fw_path);

drivers/net/wireless/st/cw1200/fwio.c

153

pr_err("Can't allocate firmware load buffer.\n");

drivers/net/wireless/st/cw1200/fwio.c

167

pr_err("Bootloader is not ready.\n");

drivers/net/wireless/st/cw1200/fwio.c

187

pr_err("Bootloader reported error %d.\n", val32);

drivers/net/wireless/st/cw1200/fwio.c

202

pr_err("Timeout waiting for FIFO.\n");

drivers/net/wireless/st/cw1200/fwio.c

224

pr_err("Can't write firmware block @ %d!\n",

drivers/net/wireless/st/cw1200/fwio.c

242

pr_err("Wait for download completion failed: 0x%.8X\n", val32);

drivers/net/wireless/st/cw1200/fwio.c

313

pr_err("Can't read config register.\n");

drivers/net/wireless/st/cw1200/fwio.c

318

pr_err("Bad config register value (0x%08x)\n", val32);

drivers/net/wireless/st/cw1200/fwio.c

325

pr_err("Can't deduce hardware type.\n");

drivers/net/wireless/st/cw1200/fwio.c

334

pr_err("Can't write DPLL register.\n");

drivers/net/wireless/st/cw1200/fwio.c

343

pr_err("Can't read DPLL register.\n");

drivers/net/wireless/st/cw1200/fwio.c

348

pr_err("Unable to initialise DPLL register. Wrote 0x%.8X, Read 0x%.8X.\n",

drivers/net/wireless/st/cw1200/fwio.c

357

pr_err("set_wakeup: can't read control register.\n");

drivers/net/wireless/st/cw1200/fwio.c

364

pr_err("set_wakeup: can't write control register.\n");

drivers/net/wireless/st/cw1200/fwio.c

373

pr_err("wait_for_wakeup: can't read control register.\n");

drivers/net/wireless/st/cw1200/fwio.c

384

pr_err("wait_for_wakeup: device is not responding.\n");

drivers/net/wireless/st/cw1200/fwio.c

394

pr_err("HW detection: can't read CUT ID.\n");

drivers/net/wireless/st/cw1200/fwio.c

419

pr_err("(1) HW detection: can't read CUT ID\n");

drivers/net/wireless/st/cw1200/fwio.c

424

pr_err("(2) HW detection: can't read CUT ID.\n");

drivers/net/wireless/st/cw1200/fwio.c

430

pr_err("(3) HW detection: can't read CUT ID.\n");

drivers/net/wireless/st/cw1200/fwio.c

450

pr_err("Unsupported silicon major revision %d.\n",

drivers/net/wireless/st/cw1200/fwio.c

459

pr_err("Can't read config register.\n");

drivers/net/wireless/st/cw1200/fwio.c

464

pr_err("Device is already in QUEUE mode!\n");

drivers/net/wireless/st/cw1200/fwio.c

472

pr_err("Can't handle CW1160/1260 firmware load yet.\n");

drivers/net/wireless/st/cw1200/fwio.c

479

pr_err("Can't perform firmware load for hw type %d.\n",

drivers/net/wireless/st/cw1200/fwio.c

485

pr_err("Firmware load error.\n");

drivers/net/wireless/st/cw1200/fwio.c

499

pr_err("Can't read config register.\n");

drivers/net/wireless/st/cw1200/fwio.c

504

pr_err("Can't write config register.\n");

drivers/net/wireless/st/cw1200/hwio.c

136

pr_err("error :[%d]\n", ret);

drivers/net/wireless/st/cw1200/hwio.c

163

pr_err("error :[%d]\n", ret);

drivers/net/wireless/st/cw1200/hwio.c

178

pr_err("Can't read more than 0xfff words.\n");

drivers/net/wireless/st/cw1200/hwio.c

186

pr_err("Can't write address register.\n");

drivers/net/wireless/st/cw1200/hwio.c

193

pr_err("Can't read config register.\n");

drivers/net/wireless/st/cw1200/hwio.c

201

pr_err("Can't write prefetch bit.\n");

drivers/net/wireless/st/cw1200/hwio.c

209

pr_err("Can't check prefetch bit.\n");

drivers/net/wireless/st/cw1200/hwio.c

219

pr_err("Prefetch bit is not cleared.\n");

drivers/net/wireless/st/cw1200/hwio.c

226

pr_err("Can't read data port.\n");

drivers/net/wireless/st/cw1200/hwio.c

241

pr_err("Can't write more than 0xfff words.\n");

drivers/net/wireless/st/cw1200/hwio.c

250

pr_err("Can't write address register.\n");

drivers/net/wireless/st/cw1200/hwio.c

258

pr_err("Can't write data port.\n");

drivers/net/wireless/st/cw1200/hwio.c

276

pr_err("Can't read config register.\n");

drivers/net/wireless/st/cw1200/hwio.c

287

pr_err("Can't write config register.\n");

drivers/net/wireless/st/cw1200/hwio.c

293

pr_err("Can't read control register.\n");

drivers/net/wireless/st/cw1200/hwio.c

304

pr_err("Can't write control register.\n");

drivers/net/wireless/st/cw1200/hwio.c

38

pr_err("buffer is not aligned.\n");

drivers/net/wireless/st/cw1200/main.c

427

pr_err("Cannot init PM. (%d).\n",

drivers/net/wireless/st/cw1200/main.c

435

pr_err("Cannot register device (%d).\n",

drivers/net/wireless/st/cw1200/main.c

514

pr_err("Unknown Refclk freq (0x%04x), using 26000KHz\n",

drivers/net/wireless/st/cw1200/main.c

570

pr_err("Timeout waiting on device startup\n");

drivers/net/wireless/st/cw1200/sta.c

1147

pr_err("Can't load sdd file %s.\n", priv->sdd_path);

drivers/net/wireless/st/cw1200/sta.c

1340

pr_err("[STA] cw1200_join_work: wsm_join failed!\n");

drivers/net/wireless/st/cw1200/sta.c

979

pr_err("Unhandled WSM Error from LMAC\n");

drivers/net/wireless/st/cw1200/wsm.c

1136

pr_err("CMD req (0x%04x) stuck in firmware, killing BH\n", priv->wsm_cmd.cmd);

drivers/net/wireless/st/cw1200/wsm.c

1139

pr_err("Outstanding outgoing frames: %d\n", priv->hw_bufs_used);

drivers/net/wireless/st/cw1200/wsm.c

1195

pr_err("[WSM] Fatal error occurred, will not flush TX.\n");

drivers/net/wireless/ti/wlcore/debug.h

51

pr_err(DRIVER_PREFIX "ERROR " fmt "\n", ##arg)

drivers/net/wireless/zydas/zd1211rw/zd_usb.c

1548

pr_err("%s couldn't create workqueue\n", driver.name);

drivers/net/wireless/zydas/zd1211rw/zd_usb.c

1555

pr_err("%s usb_register() failed. Error number %d\n",

drivers/net/wwan/iosm/iosm_ipc_chnl_cfg.c

72

pr_err("index: %d and array size %zu", index,

drivers/net/wwan/iosm/iosm_ipc_flash.c

48

pr_err("EBL: error_class = %d, error_code = %d",

drivers/net/wwan/iosm/iosm_ipc_pcie.c

483

pr_err("invalid pcie object or size");

drivers/net/wwan/iosm/iosm_ipc_pcie.c

548

pr_err(KBUILD_MODNAME ": unable to re-register PCI driver: %d\n",

drivers/net/wwan/iosm/iosm_ipc_uevent.c

23

pr_err("uevent %s failed to sent", info->uevent);

drivers/net/xen-netback/xenbus.c

564

pr_err("Failed to set watcher %s\n", vif->credit_watch.node);

drivers/net/xen-netback/xenbus.c

608

pr_err("Failed to allocate memory for watch\n");

drivers/net/xen-netback/xenbus.c

618

pr_err("Failed to set watcher %s\n",

drivers/nfc/mei_phy.c

109

pr_err("Could not send IF version cmd\n");

drivers/nfc/mei_phy.c

123

pr_err("Could not read IF version\n");

drivers/nfc/mei_phy.c

175

pr_err("Could not send connect cmd %d\n", r);

drivers/nfc/mei_phy.c

183

pr_err("Could not read connect response %d\n", r);

drivers/nfc/mei_phy.c

232

pr_err("NFC MEI command timeout\n");

drivers/nfc/mei_phy.c

324

pr_err("Could not enable device %d\n", r);

drivers/nfc/mei_phy.c

330

pr_err("Could not enable device %d\n", r);

drivers/nfc/mei_phy.c

336

pr_err("Could not connect to device %d\n", r);

drivers/nfc/mei_phy.c

342

pr_err("Event cb registration failed %d\n", r);

drivers/nfc/microread/i2c.c

85

pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]);

drivers/nfc/microread/microread.c

544

pr_err("Failed to handle discovered target err=%d\n", r);

drivers/nfc/microread/microread.c

684

pr_err("Cannot allocate nfc hdev\n");

drivers/nfc/nfcmrvl/i2c.c

167

pr_err("Failed to get generic entries\n");

drivers/nfc/nfcmrvl/i2c.c

178

pr_err("Unable to get irq\n");

drivers/nfc/nfcmrvl/main.c

260

pr_err("invalid reset-n-io GPIO\n");

drivers/nfc/nfcmrvl/spi.c

113

pr_err("Failed to get generic entries\n");

drivers/nfc/nfcmrvl/spi.c

119

pr_err("Unable to get irq\n");

drivers/nfc/nfcmrvl/uart.c

79

pr_err("Failed to get generic entries\n");

drivers/nfc/nfcsim.c

400

pr_err("Could not register digital device (%d)\n", rc);

drivers/nfc/nfcsim.c

464

pr_err("Failed to initialize nfcsim driver (%d)\n", rc);

drivers/nfc/pn544/i2c.c

335

pr_err("CRC error 0x%x != 0x%x 0x%x\n",

drivers/nfc/pn544/pn544.c

947

pr_err("Cannot allocate nfc hdev\n");

drivers/nfc/st-nci/core.c

136

pr_err("Cannot allocate nfc ndev\n");

drivers/nfc/st-nci/core.c

145

pr_err("Cannot register proprietary vendor cmds\n");

drivers/nfc/st-nci/core.c

151

pr_err("Cannot register nfc device to nci core\n");

drivers/nfc/st-nci/ndlc.c

139

pr_err("UNKNOWN Packet Control Byte=%d\n", pcb);

drivers/nfc/st-nci/ndlc.c

226

pr_err("NULL Frame -> link is dead\n");

drivers/nfc/st-nci/se.c

213

pr_err("Unexpected apdu_reader pipe on host %x\n",

drivers/nfc/st21nfca/core.c

168

pr_err("Unexpected apdu_reader pipe on host %x\n",

drivers/nfc/st21nfca/core.c

994

pr_err("Cannot allocate nfc hdev.\n");

drivers/nfc/st21nfca/dep.c

334

pr_err("Received a ACK/NACK PDU\n");

drivers/nfc/st21nfca/dep.c

337

pr_err("Received a SUPERVISOR PDU\n");

drivers/nfc/st21nfca/dep.c

57

#define PROTOCOL_ERR(req) pr_err("%d: ST21NFCA Protocol error: %s\n", \

drivers/nfc/st21nfca/dep.c

588

pr_err("Received a ACK/NACK PDU\n");

drivers/nfc/st21nfca/dep.c

598

pr_err("Received a SUPERVISOR PDU\n");

drivers/nfc/st21nfca/i2c.c

270

pr_err(ST21NFCA_HCI_DRIVER_NAME

drivers/nubus/nubus.c

134

pr_err("%s: moved out of slot address space!\n", __func__);

drivers/nubus/nubus.c

665

pr_err("Slot %X: sResource is not a board resource!\n",

drivers/nubus/nubus.c

805

pr_err("Slot %X: Board resource not found!\n", slot);

drivers/nvme/common/auth.c

191

pr_err("Invalid key len %d\n", key_len);

drivers/nvme/common/auth.c

205

pr_err("key crc mismatch (key %08x, crc %08x)\n",

drivers/nvme/common/keyring.c

33

pr_err("key id %08x not found\n", key_id);

drivers/nvme/common/keyring.c

37

pr_err("key id %08x revoked\n", key_id);

drivers/nvme/host/fabrics.c

1030

pr_err("Invalid DH-CHAP secret %s\n", p);

drivers/nvme/host/fabrics.c

1044

pr_err("Invalid DH-CHAP secret %s\n", p);

drivers/nvme/host/fabrics.c

1053

pr_err("TLS is not supported\n");

drivers/nvme/host/fabrics.c

1061

pr_err("TLS is not supported\n");

drivers/nvme/host/fabrics.c

1095

pr_err("Secure concatenation over TLS is not supported\n");

drivers/nvme/host/fabrics.c

1100

pr_err("Cannot specify a TLS key for secure concatenation\n");

drivers/nvme/host/fabrics.c

1105

pr_err("Need to enable DH-CHAP for secure concatenation\n");

drivers/nvme/host/fabrics.c

1503

pr_err("couldn't register class nvme-fabrics\n");

drivers/nvme/host/fabrics.c

1510

pr_err("couldn't create nvme-fabrics device!\n");

drivers/nvme/host/fabrics.c

1517

pr_err("couldn't register misc device: %d\n", ret);

drivers/nvme/host/fabrics.c

61

pr_err("found same hostnqn %s but different hostid %pUb\n",

drivers/nvme/host/fabrics.c

665

pr_err("TLS is not supported\n");

drivers/nvme/host/fabrics.c

67

pr_err("found same hostid %pUb but different hostnqn %s\n",

drivers/nvme/host/fabrics.c

671

pr_err("key id %08x not found\n", key_id);

drivers/nvme/host/fabrics.c

776

pr_err("%s needs to be < %d bytes\n",

drivers/nvme/host/fabrics.c

810

pr_err("Invalid queue_size %d\n", token);

drivers/nvme/host/fabrics.c

822

pr_err("Invalid number of IOQs %d\n", token);

drivers/nvme/host/fabrics.c

841

pr_err("Invalid keep_alive_tmo %d\n", token);

drivers/nvme/host/fabrics.c

876

pr_err("hostnqn already user-assigned: %s\n",

drivers/nvme/host/fabrics.c

888

pr_err("%s needs to be < %d bytes\n",

drivers/nvme/host/fabrics.c

903

pr_err("Invalid reconnect_delay %d\n", token);

drivers/nvme/host/fabrics.c

935

pr_err("Invalid hostid %s\n", p);

drivers/nvme/host/fabrics.c

960

pr_err("Invalid nr_write_queues %d\n", token);

drivers/nvme/host/fabrics.c

972

pr_err("Invalid nr_poll_queues %d\n", token);

drivers/nvme/host/fabrics.c

984

pr_err("Invalid type of service %d\n", token);

drivers/nvme/host/fc.c

3770

pr_err("nvme_discovery: too many reference "

drivers/nvme/host/fc.c

3903

pr_err("couldn't register class fc\n");

drivers/nvme/host/fc.c

3913

pr_err("couldn't create fc_udev device!\n");

drivers/nvme/host/multipath.c

25

pr_err("Can't disable multipath when multipath_always_on is configured.\n");

drivers/nvme/host/nvme.h

669

pr_err("could not locate request for tag %#x\n",

drivers/nvme/host/pci.c

154

pr_err("nvme: unrecognized quirk %s\n", field);

drivers/nvme/host/pci.c

214

pr_err("nvme: failed to parse quirk string %s\n",

drivers/nvme/host/rdma.c

2088

pr_err("ib_check_mr_status failed, ret %d\n", ret);

drivers/nvme/host/rdma.c

2105

pr_err("PI error found type %d expected 0x%x vs actual 0x%x\n",

drivers/nvme/host/rdma.c

2262

pr_err("malformed address passed: %s:%s\n",

drivers/nvme/host/rdma.c

2271

pr_err("malformed src address passed: %s\n",

drivers/nvme/host/tcp.c

1524

pr_err("queue %d: unhandled TLS record %d\n",

drivers/nvme/host/tcp.c

1531

pr_err("queue %d: bad type returned %d\n",

drivers/nvme/host/tcp.c

1537

pr_err("queue %d: bad pdu length returned %d\n",

drivers/nvme/host/tcp.c

1543

pr_err("queue %d: bad pfv returned %d\n",

drivers/nvme/host/tcp.c

1551

pr_err("queue %d: data digest mismatch host: %s ctrl: %s\n",

drivers/nvme/host/tcp.c

1561

pr_err("queue %d: header digest mismatch host: %s ctrl: %s\n",

drivers/nvme/host/tcp.c

1569

pr_err("queue %d: unsupported cpda returned %d\n",

drivers/nvme/host/tcp.c

1576

pr_err("queue %d: invalid maxh2cdata returned %u\n",

drivers/nvme/host/tcp.c

2924

pr_err("malformed address passed: %s:%s\n",

drivers/nvme/host/tcp.c

2933

pr_err("malformed src address passed: %s\n",

drivers/nvme/host/tcp.c

2941

pr_err("invalid interface passed: %s\n",

drivers/nvme/target/admin-cmd.c

1188

pr_err("write protect flush failed nsid: %u\n", req->ns->nsid);

drivers/nvme/target/admin-cmd.c

68

pr_err("SQ %u: Invalid CQID %u\n", sqid, cqid);

drivers/nvme/target/auth.c

312

pr_err("failed to allocate shash %s\n", hash_name);

drivers/nvme/target/auth.c

317

pr_err("%s: hash len mismatch (len %d digest %d)\n",

drivers/nvme/target/auth.c

419

pr_err("failed to allocate shash %s\n", hash_name);

drivers/nvme/target/auth.c

53

pr_err("DH-HMAC-CHAP hash %s unsupported\n", hmac);

drivers/nvme/target/configfs.c

1039

pr_err("can only link subsystems into the subsystems dir.!\n");

drivers/nvme/target/configfs.c

1118

pr_err("can only link hosts into the allowed_hosts directory!\n");

drivers/nvme/target/configfs.c

1131

pr_err("can't add hosts when allow_any_host is set!\n");

drivers/nvme/target/configfs.c

120

pr_err("Invalid value '%s' for portid\n", page);

drivers/nvme/target/configfs.c

1203

pr_err("Can't set allow_any_host when explicit hosts are set!\n");

drivers/nvme/target/configfs.c

1245

pr_err("Can't set version number. %llu.%llu.%llu is already assigned\n",

drivers/nvme/target/configfs.c

1250

pr_err("Can't set version number. %llu.%llu is already assigned\n",

drivers/nvme/target/configfs.c

1307

pr_err("Can't set serial number. %s is already assigned\n",

drivers/nvme/target/configfs.c

1313

pr_err("Serial Number can not be empty or exceed %d Bytes\n",

drivers/nvme/target/configfs.c

1320

pr_err("Serial Number must contain only ASCII strings\n");

drivers/nvme/target/configfs.c

1464

pr_err("Can't set model number. %s is already assigned\n",

drivers/nvme/target/configfs.c

147

pr_err("Invalid value '%s' for traddr\n", page);

drivers/nvme/target/configfs.c

1474

pr_err("Model number size can not exceed %d Bytes\n",

drivers/nvme/target/configfs.c

1523

pr_err("Can't set IEEE OUI. 0x%06x is already assigned\n",

drivers/nvme/target/configfs.c

1571

pr_err("Can't set firmware revision. %s is already assigned\n",

drivers/nvme/target/configfs.c

1581

pr_err("Firmware revision size can not exceed %d Bytes\n",

drivers/nvme/target/configfs.c

1716

pr_err("can't create discovery subsystem through configfs\n");

drivers/nvme/target/configfs.c

1721

pr_err("can't create subsystem using unique discovery NQN\n");

drivers/nvme/target/configfs.c

1777

pr_err("Invalid value '%s' for enable\n", page);

drivers/nvme/target/configfs.c

1884

pr_err("Invalid value '%s' for ana_state\n", page);

drivers/nvme/target/configfs.c

201

pr_err("Invalid value '%s' for treq\n", page);

drivers/nvme/target/configfs.c

2311

pr_err("duplicate NQN %s\n", config_item_name(item));

drivers/nvme/target/configfs.c

2370

pr_err("configfs_register_subsystem: %d\n", ret);

drivers/nvme/target/configfs.c

240

pr_err("Invalid value '%s' for trsvcid\n", page);

drivers/nvme/target/configfs.c

271

pr_err("Invalid value '%s' for inline_data_size\n", page);

drivers/nvme/target/configfs.c

297

pr_err("Invalid value '%s' for max_queue_size\n", page);

drivers/nvme/target/configfs.c

374

pr_err("Invalid value '%s' for trtype\n", page);

drivers/nvme/target/configfs.c

461

pr_err("Invalid value '%s' for tsas\n", page);

drivers/nvme/target/configfs.c

467

pr_err("TLS is not supported\n");

drivers/nvme/target/configfs.c

471

pr_err("TLS keyring not configured\n");

drivers/nvme/target/configfs.c

58

pr_err("Disable port '%u' before changing attribute in %s\n",

drivers/nvme/target/configfs.c

737

pr_err("disable ns before setting buffered_io value.\n");

drivers/nvme/target/configfs.c

763

pr_err("enable ns before revalidate.\n");

drivers/nvme/target/configfs.c

791

pr_err("the ns:%d is already enabled.\n", ns->nsid);

drivers/nvme/target/configfs.c

847

pr_err("invalid nsid %#x", nsid);

drivers/nvme/target/configfs.c

95

pr_err("Invalid value '%s' for adrfam\n", page);

drivers/nvme/target/core.c

1015

pr_err("percpu_ref init failed!\n");

drivers/nvme/target/core.c

1506

pr_err("got cmd %d while CC.EN == 0 on qid = %d\n",

drivers/nvme/target/core.c

1512

pr_err("got cmd %d while CSTS.RDY == 0 on qid = %d\n",

drivers/nvme/target/core.c

1579

pr_err("ctrl %d fatal error occurred!\n", ctrl->cntlid);

drivers/nvme/target/core.c

1693

pr_err("Failed to setup authentication, dhchap status %u\n",

drivers/nvme/target/core.c

1863

pr_err("%s: Unknown Subsystem type - %d\n", __func__, type);

drivers/nvme/target/core.c

333

pr_err("transport type %d not supported\n",

drivers/nvme/target/core.c

347

pr_err("T10-PI is not supported by transport type %d\n",

drivers/nvme/target/core.c

410

pr_err("ctrl %d keep-alive timer (%d seconds) expired!\n",

drivers/nvme/target/core.c

484

pr_err("peer-to-peer DMA is not supported by non-block device namespaces\n");

drivers/nvme/target/core.c

489

pr_err("peer-to-peer DMA is not supported by the driver of %s\n",

drivers/nvme/target/core.c

508

pr_err("no peer-to-peer memory is available for %s\n",

drivers/nvme/target/core.c

543

pr_err("no peer-to-peer memory is available that's supported by %s and %s\n",

drivers/nvme/target/discovery.c

377

pr_err("got cmd %d while not ready\n",

drivers/nvme/target/fabrics-cmd-auth.c

298

pr_err("ctrl %d qid 0 failed to setup re-authentication\n",

drivers/nvme/target/fabrics-cmd.c

231

pr_err("failed to install queue %d cntlid %d ret %x\n",

drivers/nvme/target/fc.c

1714

pr_err("{%d}: Create Association LS failed: %s\n",

drivers/nvme/target/fc.c

1806

pr_err("{%d}: Create Connection LS failed: %s\n",

drivers/nvme/target/fc.c

1868

pr_err("{%d}: Disconnect LS failed: %s\n",

drivers/nvme/target/fcloop.c

1712

pr_err("couldn't register class fcloop\n");

drivers/nvme/target/fcloop.c

1720

pr_err("couldn't create ctl device!\n");

drivers/nvme/target/io-cmd-bdev.c

200

pr_err("Unable to locate bio_integrity\n");

drivers/nvme/target/io-cmd-bdev.c

207

pr_err("Unable to allocate bio_integrity_payload\n");

drivers/nvme/target/io-cmd-bdev.c

221

pr_err("bio_integrity_add_page() failed; %d\n", rc);

drivers/nvme/target/io-cmd-bdev.c

99

pr_err("failed to open block device %s: (%d)\n",

drivers/nvme/target/io-cmd-file.c

44

pr_err("failed to open file %s: (%d)\n",

drivers/nvme/target/passthru.c

313

pr_err("failed to get passthru ns nsid:%u\n", nsid);

drivers/nvme/target/passthru.c

604

pr_err("failed to open nvme controller %s\n",

drivers/nvme/target/rdma.c

1027

pr_err("RECV for CQE 0x%p failed with status %s (%d)\n",

drivers/nvme/target/rdma.c

1036

pr_err("Ctrl Fatal Error: capsule size less than 64 bytes\n");

drivers/nvme/target/rdma.c

1277

pr_err("failed to create CQ cqe= %d ret= %d\n",

drivers/nvme/target/rdma.c

1309

pr_err("failed to create_qp ret= %d\n", ret);

drivers/nvme/target/rdma.c

1499

pr_err("%s: creating RDMA queue failed (%d).\n",

drivers/nvme/target/rdma.c

1540

pr_err("received IB QP event: %s (%d)\n",

drivers/nvme/target/rdma.c

1565

pr_err("rdma_accept failed (error code = %d)\n", ret);

drivers/nvme/target/rdma.c

1716

pr_err("failed to connect queue %d\n", queue->idx);

drivers/nvme/target/rdma.c

1811

pr_err("received unrecognized RDMA CM event %d\n",

drivers/nvme/target/rdma.c

1874

pr_err("CM ID creation failed\n");

drivers/nvme/target/rdma.c

1884

pr_err("rdma_set_afonly failed (%d)\n", ret);

drivers/nvme/target/rdma.c

1890

pr_err("binding CM ID to %pISpcs failed (%d)\n", addr, ret);

drivers/nvme/target/rdma.c

1896

pr_err("listening to %pISpcs failed (%d)\n", addr, ret);

drivers/nvme/target/rdma.c

1942

pr_err("address family %d not supported\n",

drivers/nvme/target/rdma.c

1968

pr_err("malformed ip/port passed: %s:%s\n",

drivers/nvme/target/rdma.c

508

pr_err("post_recv cmd failed\n");

drivers/nvme/target/rdma.c

544

pr_err("ib_check_mr_status failed, ret %d\n", ret);

drivers/nvme/target/rdma.c

560

pr_err("PI error found type %d expected 0x%x vs actual 0x%x\n",

drivers/nvme/target/rdma.c

702

pr_err("SEND for CQE 0x%p failed with status %s (%d).\n",

drivers/nvme/target/rdma.c

740

pr_err("sending cmd response failed\n");

drivers/nvme/target/rdma.c

816

pr_err("sending cmd response failed\n");

drivers/nvme/target/rdma.c

858

pr_err("invalid inline data offset!\n");

drivers/nvme/target/rdma.c

918

pr_err("invalid SGL subtype: %#x\n", sgl->type);

drivers/nvme/target/rdma.c

930

pr_err("invalid SGL subtype: %#x\n", sgl->type);

drivers/nvme/target/rdma.c

936

pr_err("invalid SGL type: %#x\n", sgl->type);

drivers/nvme/target/tcp.c

1009

pr_err("queue %d: H2CData PDU received for invalid command state (ttag %u)\n",

drivers/nvme/target/tcp.c

1035

pr_err("unexpected pdu type (%d) before icreq\n",

drivers/nvme/target/tcp.c

1044

pr_err("queue %d: received icreq pdu in state %d\n",

drivers/nvme/target/tcp.c

1060

pr_err("queue %d: out of commands (%d) send_list_len: %d, opcode: %d",

drivers/nvme/target/tcp.c

1071

pr_err("failed cmd %p id %d opcode %d, data_len: %d, status: %04x\n",

drivers/nvme/target/tcp.c

1083

pr_err("queue %d: failed to map data\n", queue->idx);

drivers/nvme/target/tcp.c

1153

pr_err("queue %d: TLS Alert desc %u\n",

drivers/nvme/target/tcp.c

1164

pr_err("queue %d: TLS record %d unhandled\n",

drivers/nvme/target/tcp.c

1206

pr_err("unexpected pdu type %d\n", hdr->type);

drivers/nvme/target/tcp.c

1212

pr_err("pdu %d bad hlen %d\n", hdr->type, hdr->hlen);

drivers/nvme/target/tcp.c

1309

pr_err("queue %d: cmd %d pdu (%d) data digest error: recv %#x expected %#x\n",

drivers/nvme/target/tcp.c

1885

pr_err("failed to start TLS, err=%d\n", ret);

drivers/nvme/target/tcp.c

1994

pr_err("failed to allocate queue, error %d\n", ret);

drivers/nvme/target/tcp.c

2051

pr_err("address family %d not supported\n",

drivers/nvme/target/tcp.c

2060

pr_err("malformed ip/port passed: %s:%s\n",

drivers/nvme/target/tcp.c

2073

pr_err("failed to create a socket\n");

drivers/nvme/target/tcp.c

2088

pr_err("failed to bind port socket %d\n", ret);

drivers/nvme/target/tcp.c

2094

pr_err("failed to listen %d on port sock\n", ret);

drivers/nvme/target/tcp.c

308

pr_err("queue %d: header digest enabled but no header digest\n",

drivers/nvme/target/tcp.c

317

pr_err("queue %d: header digest error: recv %#x expected %#x\n",

drivers/nvme/target/tcp.c

336

pr_err("queue %d: data digest flag is cleared\n", queue->idx);

drivers/nvme/target/tcp.c

888

pr_err("bad nvme-tcp pdu length (%d)\n",

drivers/nvme/target/tcp.c

895

pr_err("queue %d: bad pfv %d\n", queue->idx, icreq->pfv);

drivers/nvme/target/tcp.c

900

pr_err("queue %d: unsupported hpda %d\n", queue->idx,

drivers/nvme/target/tcp.c

955

pr_err("queue %d: failed to map data\n", queue->idx);

drivers/nvme/target/tcp.c

973

pr_err("queue %d: received out of bound ttag %u, nr_cmds %u\n",

drivers/nvme/target/tcp.c

983

pr_err("ttag %u unexpected data offset %u (expected %u)\n",

drivers/nvme/target/tcp.c

998

pr_err("H2CData PDU len %u is invalid\n", cmd->pdu_len);

drivers/nvmem/mtk-efuse.c

143

pr_err("Failed to register efuse driver\n");

drivers/nvmem/stm32-bsec-optee-ta.c

113

pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);

drivers/nvmem/stm32-bsec-optee-ta.c

180

pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n",

drivers/nvmem/stm32-bsec-optee-ta.c

189

pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);

drivers/nvmem/stm32-bsec-optee-ta.c

246

pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);

drivers/nvmem/stm32-bsec-optee-ta.c

256

pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);

drivers/nvmem/stm32-bsec-optee-ta.c

284

pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);

drivers/nvmem/stm32-bsec-optee-ta.c

83

pr_err("%s: tee_client_open_session failed err:%#x, ret:%#x\n",

drivers/of/address.c

563

pr_err("Bad cell count for %pOF\n", dev);

drivers/of/address.c

922

pr_err("translation of DMA address(%llx) to CPU address failed node(%pOF)\n",

drivers/of/base.c

1342

pr_err("%pOF: could not find phandle %d\n",

drivers/of/base.c

1357

pr_err("%pOF: could not get %s for %pOF\n",

drivers/of/base.c

1374

pr_err("%pOF: %s = %d found %td\n",

drivers/of/base.c

1378

pr_err("%pOF: phandle %s needs %d, found %td\n",

drivers/of/base.c

195

pr_err("failed to register existing nodes\n");

drivers/of/base.c

2139

pr_err("%pOF: Error: Bad %s length: %d\n", np,

drivers/of/base.c

2163

pr_err("%pOF: Invalid %s translation - %s-mask (0x%x) ignores id-base (0x%x)\n",

drivers/of/dynamic.c

346

pr_err("ERROR: %s() detected bad of_node_put() on %pOF/%s\n",

drivers/of/dynamic.c

358

pr_err("ERROR: next of_node_put() on this node will result in a kobject warning 'refcount_t: underflow; use-after-free.'\n");

drivers/of/dynamic.c

370

pr_err("ERROR: memory leak before free overlay changeset, %pOF\n",

drivers/of/dynamic.c

381

pr_err("ERROR: %s(), unexpected properties in %pOF\n",

drivers/of/dynamic.c

386

pr_err("ERROR: %s() unexpected children for %pOF/%s\n",

drivers/of/dynamic.c

527

pr_err("ERROR: memory leak, expected refcount 1 instead of %d, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node %pOF\n",

drivers/of/dynamic.c

594

pr_err("invalid devicetree changeset action: %i\n",

drivers/of/dynamic.c

600

pr_err("changeset notifier error @%pOF\n", ce->np);

drivers/of/dynamic.c

708

pr_err("Error applying changeset (%d)\n", ret);

drivers/of/dynamic.c

812

pr_err("Error reverting changeset (%d)\n", ret);

drivers/of/dynamic.c

82

#define of_changeset_action_err(...) _do_print(pr_err, __VA_ARGS__)

drivers/of/fdt.c

1285

pr_err("invalid size in dtb_empty_root\n");

drivers/of/fdt.c

321

pr_err("Error %d processing FDT\n", offset);

drivers/of/fdt.c

377

pr_err("Invalid device tree blob header\n");

drivers/of/fdt.c

513

pr_err("Invalid memory reservation block index %d\n", n);

drivers/of/fdt.c

780

pr_err("\n unrecognized device tree list:\n[ ");

drivers/of/fdt_address.c

164

pr_err("warning: device tree node '%s' has no address.\n",

drivers/of/fdt_address.c

178

pr_err("Bad cell count for %s\n",

drivers/of/fdt_address.c

205

pr_err("Bad cell count for %s\n",

drivers/of/irq.c

724

pr_err("%s: Failed to init %pOF (%p), parent %p\n",

drivers/of/irq.c

745

pr_err("of_irq_init: children remain, but no parents\n");

drivers/of/kexec.c

327

pr_err("Error %d setting up the new device tree.\n", ret);

drivers/of/kexec.c

335

pr_err("Error removing memory reservation.\n");

drivers/of/kexec.c

49

pr_err("Malformed device tree.\n");

drivers/of/kexec.c

56

pr_err("Error deleting device tree reservation.\n");

drivers/of/of_numa.c

110

pr_err("Invalid distance[node%d -> node%d] = %d\n",

drivers/of/of_numa.c

70

pr_err("bad property in memory node\n");

drivers/of/of_numa.c

88

pr_err("No distance-matrix property in distance-map\n");

drivers/of/of_numa.c

94

pr_err("Invalid distance-matrix\n");

drivers/of/of_reserved_mem.c

117

pr_err("not enough space for all defined regions.\n");

drivers/of/of_reserved_mem.c

169

pr_err("Skipping dt linux,cma-default for \"cma=\" kernel param.\n");

drivers/of/of_reserved_mem.c

189

pr_err("Reserved memory: failed to reserve memory for node '%s': base %pa, size %lu MiB\n",

drivers/of/of_reserved_mem.c

250

pr_err("Reserved memory: unsupported node format, ignoring\n");

drivers/of/of_reserved_mem.c

297

pr_err("Reserved memory: unsupported node format, ignoring\n");

drivers/of/of_reserved_mem.c

408

pr_err("invalid size property in '%s' node.\n", uname);

drivers/of/of_reserved_mem.c

416

pr_err("invalid alignment property in '%s' node.\n",

drivers/of/of_reserved_mem.c

427

pr_err("Skipping dt linux,cma-default for \"cma=\" kernel param.\n");

drivers/of/of_reserved_mem.c

467

pr_err("failed to allocate memory for node '%s': size %lu MiB\n",

drivers/of/of_reserved_mem.c

557

pr_err("OVERLAP DETECTED!\n%s (%pa--%pa) overlaps with %s (%pa--%pa)\n",

drivers/of/of_reserved_mem.c

81

pr_err("Failed to allocate memory for reserved_mem array with err: %d", -EOVERFLOW);

drivers/of/of_reserved_mem.c

87

pr_err("Failed to allocate memory for reserved_mem array with err: %d", -ENOMEM);

drivers/of/of_reserved_mem.c

95

pr_err("Failed to allocate memory for reserved_mem array with err: %d", -EOVERFLOW);

drivers/of/overlay.c

1004

pr_err("Invalid overlay_fdt header\n");

drivers/of/overlay.c

1051

pr_err("unable to unflatten overlay_fdt\n");

drivers/of/overlay.c

1113

pr_err("%s: #%d overlaps with #%d @%pOF\n",

drivers/of/overlay.c

1119

pr_err("%s: #%d overlaps with #%d @%pOF\n",

drivers/of/overlay.c

1146

pr_err("overlay #%d is not topmost\n", remove_ovcs->id);

drivers/of/overlay.c

1197

pr_err("suspect devicetree state, refuse to remove overlay\n");

drivers/of/overlay.c

1207

pr_err("remove: Could not find overlay #%d\n", *ovcs_id);

drivers/of/overlay.c

1230

pr_err("overlay remove changeset entry notify error %d\n", ret);

drivers/of/overlay.c

179

pr_err("overlay changeset %s notifier error %d, target: %pOF\n",

drivers/of/overlay.c

324

pr_err("ERROR: changing value of #address-cells is not allowed in %pOF\n",

drivers/of/overlay.c

332

pr_err("ERROR: changing value of #size-cells is not allowed in %pOF\n",

drivers/of/overlay.c

364

pr_err("WARNING: memory leak will occur if overlay removed, property: %pOF/%s\n",

drivers/of/overlay.c

550

pr_err("ERROR: multiple fragments add and/or delete node %pOF\n",

drivers/of/overlay.c

586

pr_err("ERROR: multiple fragments add, update, and/or delete property %pOF/%s\n",

drivers/of/overlay.c

696

pr_err("find target, node: %pOF, phandle 0x%x not found\n",

drivers/of/overlay.c

709

pr_err("find target, node: %pOF, path '%s' not found\n",

drivers/of/overlay.c

716

pr_err("find target, node: %pOF, path '%s' not found\n",

drivers/of/overlay.c

723

pr_err("find target, node: %pOF, no target property\n", info_node);

drivers/of/overlay.c

825

pr_err("symbols in overlay, but not in live tree\n");

drivers/of/overlay.c

835

pr_err("no fragments or symbols in overlay\n");

drivers/of/overlay.c

845

pr_err("%s() failed, ret = %d\n", __func__, ret);

drivers/of/overlay.c

951

pr_err("overlay apply changeset entry notify error %d\n", ret);

drivers/of/overlay.c

998

pr_err("devicetree state suspect, refuse to apply overlay\n");

drivers/of/pdt.c

61

pr_err("%s: pkg2path failed; assigning %s\n", __func__, buf);

drivers/of/platform.c

242

pr_err("amba: of_address_to_resource() failed (%d) for %pOF\n",

drivers/of/platform.c

249

pr_err("amba_device_add() failed (%d) for %pOF\n",

drivers/of/platform.c

753

pr_err("%s: failed to create for '%pOF'\n",

drivers/of/property.c

106

pr_err("size of %s in node %pOF is not a multiple of %d\n",

drivers/of/resolver.c

259

pr_err("null overlay\n");

drivers/of/resolver.c

264

pr_err("overlay not detached\n");

drivers/of/resolver.c

291

pr_err("no symbols in root of device tree.\n");

drivers/of/resolver.c

304

pr_err("node label '%s' not found in live devicetree symbols table\n",

drivers/of/resolver.c

322

pr_err("overlay phandle fixup failed: %d\n", err);

drivers/of/unittest.c

1041

pr_err("missing testcase data\n");

drivers/of/unittest.c

1106

pr_err("missing testcase data\n");

drivers/of/unittest.c

1126

pr_err("missing testcase data\n");

drivers/of/unittest.c

1187

pr_err("missing testcase data\n");

drivers/of/unittest.c

1192

pr_err("missing dma-ranges property\n");

drivers/of/unittest.c

1238

pr_err("missing testcase data\n");

drivers/of/unittest.c

1243

pr_err("missing dma-ranges property\n");

drivers/of/unittest.c

1275

pr_err("missing testcase data\n");

drivers/of/unittest.c

1280

pr_err("missing ranges property\n");

drivers/of/unittest.c

1345

pr_err("missing testcase data\n");

drivers/of/unittest.c

1350

pr_err("missing ranges property\n");

drivers/of/unittest.c

1400

pr_err("missing testcase data\n");

drivers/of/unittest.c

1414

pr_err("missing testcase data\n");

drivers/of/unittest.c

1446

pr_err("missing testcase data (%s)\n", node_path);

drivers/of/unittest.c

1513

pr_err("missing testcase data\n");

drivers/of/unittest.c

1534

pr_err("missing testcase data\n");

drivers/of/unittest.c

1590

pr_err("missing testcase data\n");

drivers/of/unittest.c

1708

pr_err("missing testcase data\n");

drivers/of/unittest.c

1792

pr_err("missing testcase data\n");

drivers/of/unittest.c

195

pr_err("missing testcase data\n");

drivers/of/unittest.c

2040

pr_err("unittest internal error: unable to add testdata property %pOF/%s",

drivers/of/unittest.c

2147

pr_err("%s: Failed to resolve phandles (rc=%i)\n", __func__, rc);

drivers/of/unittest.c

255

pr_err("Child node %pOFn links to wrong parent %pOFn\n",

drivers/of/unittest.c

3910

pr_err("no overlay data for %s\n", overlay_name);

drivers/of/unittest.c

3917

pr_err("No dtb 'overlay_base' to attach\n");

drivers/of/unittest.c

3923

pr_err("No dtb 'overlay_base' to attach\n");

drivers/of/unittest.c

3929

pr_err("dtb 'overlay_base' header totalsize != actual size");

drivers/of/unittest.c

3935

pr_err("alloc for dtb 'overlay_base' failed");

drivers/of/unittest.c

3971

pr_err("no overlay data for %s\n", overlay_name);

drivers/of/unittest.c

3977

pr_err("no overlay data for %s\n", overlay_name);

drivers/of/unittest.c

3990

pr_err("of_overlay_fdt_apply() expected %d, ret=%d, %s\n",

drivers/of/unittest.c

3999

pr_err("of_overlay_remove() expected %d, ret=%d, %s\n",

drivers/of/unittest.c

408

pr_err("missing testcase data\n");

drivers/of/unittest.c

4360

pr_err("unable to find parent device\n");

drivers/of/unittest.c

45

pr_err("FAIL %s():%i " fmt, __func__, __LINE__, ##__VA_ARGS__); \

drivers/of/unittest.c

568

pr_err("missing testcase data\n");

drivers/of/unittest.c

580

pr_err("missing testcase data\n");

drivers/of/unittest.c

721

pr_err("No testcase data in device tree\n");

drivers/opp/core.c

129

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/core.c

155

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/core.c

178

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/core.c

203

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/core.c

225

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/core.c

243

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/core.c

265

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/core.c

275

pr_err("%s: Performance state is only valid for genpds.\n", __func__);

drivers/opp/core.c

2750

pr_err("%s: Couldn't find matching OPP (%p: %p)\n", __func__,

drivers/opp/core.c

2790

pr_err("%s: Performance state is only valid for genpds.\n", __func__);

drivers/opp/core.c

2804

pr_err("%s: Couldn't find matching OPP table (%p: %p)\n",

drivers/opp/core.c

2816

pr_err("%s: Couldn't find matching OPP (%p: %p)\n", __func__, src_table,

drivers/opp/core.c

296

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/core.c

79

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/cpu.c

121

pr_err("%s: failed to get cpu%d device\n", __func__,

drivers/opp/of.c

1225

pr_err("%s: failed to get cpu%d device\n", __func__,

drivers/opp/of.c

1309

pr_err("%pOF: Couldn't find opp node\n", cpu_np);

drivers/opp/of.c

1347

pr_err("%s: Failed to find required OPP table %pOF: %ld\n",

drivers/opp/of.c

1354

pr_err("%s: Performance state is only valid for genpds.\n", __func__);

drivers/opp/of.c

1363

pr_err("%s: OPP levels aren't available for %pOF\n",

drivers/opp/of.c

1418

pr_err("%s: Invalid parameters\n", __func__);

drivers/opp/of.c

288

pr_err("%s: Unable to find required OPP node: %pOF (%d)\n",

drivers/opp/of.c

734

pr_err("%s: Count mismatch between opp-hz and clk_count (%d %d)\n",

drivers/opp/of.c

745

pr_err("%s: Error parsing opp-hz: %d\n", __func__, ret);

drivers/opp/of.c

779

pr_err("%s: Mismatch between %s and paths (%d %d)\n",

drivers/opp/of.c

790

pr_err("%s: Error parsing %s: %d\n", __func__, name, ret);

drivers/parisc/eisa.c

334

pr_err("Failed to request irq 2 (cascade)\n");

drivers/parisc/led.c

435

pr_err("led: Unknown LCD/LED model type %d\n", lcd_info.model);

drivers/parport/daisy.c

124

pr_err("daisy registration failed\n");

drivers/parport/ieee1284.c

322

pr_err("parport: IEEE1284 not supported in this kernel\n");

drivers/parport/ieee1284.c

677

pr_err("parport: IEEE1284 not supported in this kernel\n");

drivers/parport/parport_pc.c

3166

pr_err("parport: bad specifier `%s'\n", s);

drivers/parport/parport_pc.c

3310

pr_err("parport=%s ignored, too many ports\n", str);

drivers/parport/share.c

1186

pr_err("%s: don't know how to wake %s\n",

drivers/parport/share.c

681

pr_err("%s: no more devices allowed\n", port->name);

drivers/parport/share.c

701

pr_err("%s: cannot grant exclusive access for device %s\n",

drivers/parport/share.c

825

pr_err("%s: passed NULL\n", __func__);

drivers/pci/bus.c

43

pr_err("PCI: can't add host bridge window %pR\n", res);

drivers/pci/controller/pci-hyperv.c

982

pr_err("Failed to create Hyper-V arm64 vPCI MSI IRQ domain\n");

drivers/pci/controller/pci-thunder-ecam.c

209

pr_err("Bad MSI-X cap header: %08x\n", v);

drivers/pci/controller/pci-thunder-ecam.c

265

pr_err("Bad PCIe cap header: %08x\n", v);

drivers/pci/controller/pci-versatile.c

38

pr_err("Illegal slot value: %d\n", slot);

drivers/pci/controller/pci-xgene-msi.c

331

pr_err("failed to set affinity for GIC IRQ");

drivers/pci/controller/pcie-brcmstb.c

2057

pr_err("failed to look up compatible string\n");

drivers/pci/endpoint/functions/pci-epf-ntb.c

2130

pr_err("Failed to allocate kpcintb workqueue\n");

drivers/pci/endpoint/functions/pci-epf-ntb.c

2137

pr_err("Failed to register pci epf ntb driver --> %d\n", ret);

drivers/pci/endpoint/functions/pci-epf-test.c

1463

pr_err("Failed to allocate the kpcitest work queue\n");

drivers/pci/endpoint/functions/pci-epf-test.c

1470

pr_err("Failed to register pci epf test driver --> %d\n", ret);

drivers/pci/endpoint/functions/pci-epf-vntb.c

1234

pr_err("create pci bus failed\n");

drivers/pci/endpoint/functions/pci-epf-vntb.c

1657

pr_err("Failed to allocate kpcintb workqueue\n");

drivers/pci/endpoint/functions/pci-epf-vntb.c

1664

pr_err("Failed to register pci epf ntb driver --> %d\n", ret);

drivers/pci/endpoint/pci-ep-cfs.c

288

pr_err("failed to register configfs group for %s\n", name);

drivers/pci/endpoint/pci-ep-cfs.c

581

pr_err("failed to create 'primary' EPC interface\n");

drivers/pci/endpoint/pci-ep-cfs.c

587

pr_err("failed to create 'secondary' EPC interface\n");

drivers/pci/endpoint/pci-ep-cfs.c

627

pr_err("failed to create endpoint function device\n");

drivers/pci/endpoint/pci-ep-cfs.c

677

pr_err("failed to register configfs group for %s function\n",

drivers/pci/endpoint/pci-ep-cfs.c

725

pr_err("Error %d while registering subsystem %s\n",

drivers/pci/endpoint/pci-ep-cfs.c

734

pr_err("Error %d while registering functions group\n",

drivers/pci/endpoint/pci-ep-cfs.c

744

pr_err("Error %d while registering controllers group\n",

drivers/pci/endpoint/pci-epc-mem.c

258

pr_err("failed to get matching window\n");

drivers/pci/endpoint/pci-epf-core.c

684

pr_err("failed to register pci epf bus --> %d\n", ret);

drivers/pci/hotplug/acpiphp_core.c

280

pr_err("pci_hp_register failed with error %d\n", retval);

drivers/pci/hotplug/acpiphp_ibm.c

171

pr_err("APLS null ACPI descriptor for slot %d\n", id);

drivers/pci/hotplug/acpiphp_ibm.c

188

pr_err("APLS evaluation failed: 0x%08x\n", stat);

drivers/pci/hotplug/acpiphp_ibm.c

191

pr_err("APLS method failed: 0x%08llx\n", rc);

drivers/pci/hotplug/acpiphp_ibm.c

216

pr_err("APLS null ACPI descriptor for slot %d\n", id);

drivers/pci/hotplug/acpiphp_ibm.c

292

pr_err("%s: APCI evaluation failed\n", __func__);

drivers/pci/hotplug/acpiphp_ibm.c

300

pr_err("%s: Invalid APCI object\n", __func__);

drivers/pci/hotplug/acpiphp_ibm.c

306

pr_err("%s: Invalid APCI element %d\n", __func__, i);

drivers/pci/hotplug/acpiphp_ibm.c

395

pr_err("%s: Failed to get device information status=0x%x\n",

drivers/pci/hotplug/acpiphp_ibm.c

431

pr_err("%s: acpi_walk_namespace failed\n", __func__);

drivers/pci/hotplug/acpiphp_ibm.c

438

pr_err("%s: acpi_fetch_acpi_dev failed\n", __func__);

drivers/pci/hotplug/acpiphp_ibm.c

452

pr_err("%s: Failed to register notification handler\n",

drivers/pci/hotplug/acpiphp_ibm.c

477

pr_err("%s: attention info deregistration failed", __func__);

drivers/pci/hotplug/acpiphp_ibm.c

484

pr_err("%s: Notification handler removal failed\n", __func__);

drivers/pci/of.c

778

pr_err("of_root node is NULL, cannot create PCI host bridge node\n");

drivers/pci/p2pdma.c

1175

pr_err("No such PCI device: %.*s\n", (int)strcspn(page, "\n"), page);

drivers/pci/pci-acpi.c

705

pr_err("%s: Type %d record not supported\n",

drivers/pci/pci.c

6370

pr_err("PCI: Invalid requested alignment (order %d)\n",

drivers/pci/pci.c

6384

pr_err("PCI: Can't parse resource_alignment parameter: %s\n",

drivers/pci/pci.c

6757

pr_err("PCI: Unknown option `%s'\n", str);

drivers/pci/pcie/aer.c

1280

pr_err("buffer overflow in recovery for %04x:%02x:%02x.%x\n",

drivers/pci/slot.c

335

pr_err("PCI: Slot initialization failure\n");

drivers/pci/vgaarb.c

1515

pr_err("error %d registering device\n", rc);

drivers/pcmcia/i82092.c

303

pr_err("i82092aa: infinite eventloop in interrupt\n");

drivers/pcmcia/soc_common.c

342

pr_err("soc_common_pcmcia: unable to configure socket %d\n",

drivers/peci/core.c

217

pr_err("peci: failed to register PECI bus type!\n");

drivers/peci/device.c

222

pr_err("peci: trying to register driver without probe callback\n");

drivers/peci/device.c

227

pr_err("peci: trying to register driver without device id table\n");

drivers/perf/alibaba_uncore_drw_pmu.c

797

pr_err("DRW Driveway PMU: setup hotplug failed, ret = %d\n",

drivers/perf/arm_cspmu/ampere_cspmu.c

247

pr_err("ampere_cspmu backend registration error: %d\n", ret);

drivers/perf/arm_cspmu/arm_cspmu.c

101

pr_err("ARM CSPMU: timeout hi-low-high sequence\n");

drivers/perf/arm_cspmu/arm_cspmu.c

1381

pr_err("arm_cspmu reg failed, unable to find a match for pmiidr: 0x%x\n",

drivers/perf/arm_cspmu/nvidia_cspmu.c

454

pr_err("nvidia_cspmu backend registration error: %d\n", ret);

drivers/perf/arm_pmu.c

696

pr_err("unable to request IRQ%d for ARM PMU counters\n", irq);

drivers/perf/arm_pmu.c

967

pr_err("CPU hotplug notifier for ARM PMU could not be registered: %d\n",

drivers/perf/arm_v7_pmu.c

738

pr_err("CPU%u reading wrong counter %d\n",

drivers/perf/arm_v7_pmu.c

757

pr_err("CPU%u writing wrong counter %d\n",

drivers/perf/arm_v7_pmu.c

855

pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",

drivers/perf/arm_v7_pmu.c

879

pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",

drivers/perf/dwc_pcie_pmu.c

708

pr_err("No pdev found for the sbdf 0x%x\n", sbdf);

drivers/perf/hisilicon/hisi_pcie_pmu.c

986

pr_err("Failed to setup PCIe PMU hotplug: %d\n", ret);

drivers/perf/hisilicon/hisi_uncore_cpa_pmu.c

348

pr_err("setup hotplug failed: %d\n", ret);

drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c

513

pr_err("DDRC PMU: setup hotplug, ret = %d\n", ret);

drivers/perf/hisilicon/hisi_uncore_hha_pmu.c

540

pr_err("HHA PMU: Error setup hotplug, ret = %d;\n", ret);

drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c

949

pr_err("L3C PMU: Error setup hotplug, ret = %d\n", ret);

drivers/perf/hisilicon/hisi_uncore_mn_pmu.c

388

pr_err("hisi_mn_pmu: Failed to setup MN PMU hotplug: %d\n", ret);

drivers/perf/hisilicon/hisi_uncore_noc_pmu.c

420

pr_err("hisi_noc_pmu: Fail to setup cpuhp callbacks, ret = %d\n", ret);

drivers/perf/hisilicon/hisi_uncore_pa_pmu.c

527

pr_err("PA PMU: cpuhp state setup failed, ret = %d\n", ret);

drivers/perf/hisilicon/hisi_uncore_sllc_pmu.c

563

pr_err("SLLC PMU: cpuhp state setup failed, ret = %d\n", ret);

drivers/perf/hisilicon/hisi_uncore_uc_pmu.c

572

pr_err("UC PMU: Error setup hotplug, ret = %d\n", ret);

drivers/perf/hisilicon/hns3_pmu.c

1652

pr_err("failed to setup HNS3 PMU hotplug, ret = %d.\n", ret);

drivers/perf/hisilicon/hns3_pmu.c

1658

pr_err("failed to register pci driver, ret = %d.\n", ret);

drivers/perf/marvell_cn10k_ddr_pmu.c

434

pr_err("%s Invalid eventid %d\n", __func__, eventid);

drivers/perf/marvell_cn10k_ddr_pmu.c

534

pr_err("Error: unsupported counter %d\n", counter);

drivers/perf/riscv_pmu.c

138

pr_err("Invalid performance counter csr %lx\n", csr);

drivers/perf/riscv_pmu_sbi.c

1222

pr_err("Failed to find INTC IRQ root domain\n");

drivers/perf/riscv_pmu_sbi.c

1228

pr_err("Failed to map PMU interrupt for node\n");

drivers/perf/riscv_pmu_sbi.c

1234

pr_err("registering percpu irq failed [%d]\n", ret);

drivers/perf/riscv_pmu_sbi.c

1435

pr_err("SBI PMU extension doesn't provide any counters\n");

drivers/perf/riscv_pmu_sbi.c

1552

pr_err("CPU hotplug notifier could not be registered: %d\n",

drivers/perf/riscv_pmu_sbi.c

385

pr_err("pmu_sbi_check_event_info failed with error %d\n", ret);

drivers/perf/riscv_pmu_sbi.c

814

pr_err("Starting counter idx %d failed with error %d\n",

drivers/perf/riscv_pmu_sbi.c

853

pr_err("Stopping counter idx %d failed with error %d\n",

drivers/perf/thunderx2_pmu.c

1024

pr_err("TX2 PMU: setup hotplug failed(%d)\n", ret);

drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c

223

pr_err("Invalid extcon event\n");

drivers/phy/broadcom/phy-bcm-sr-usb.c

119

pr_err("%s: FAIL\n", __func__);

drivers/phy/phy-common-props.c

120

pr_err("%d is not a supported value for %pfw '%s' element '%s'\n",

drivers/phy/phy-common-props.c

50

pr_err("Lookup key inside \"%s\" is mandatory\n", names_title);

drivers/phy/phy-common-props.c

63

pr_err("%pfw mismatch between \"%s\" and \"%s\" property count (%d vs %d)\n",

drivers/phy/phy-common-props.c

77

pr_err("%pfw \"%s \" property has %d elements, but cannot find \"%s\" in \"%s\" and there is no default value\n",

drivers/phy/phy-core.c

1297

pr_err("failed to register phy class");

drivers/phy/phy-xgene.c

569

pr_err("SDS WR timeout at 0x%p offset 0x%08X value 0x%08X\n",

drivers/phy/phy-xgene.c

590

pr_err("SDS WR timeout at 0x%p offset 0x%08X value 0x%08X\n",

drivers/phy/qualcomm/phy-qcom-m31-eusb2.c

144

pr_err("write: %x to offset: %x FAILED\n", val, offset);

drivers/phy/qualcomm/phy-qcom-qmp-combo.c

4330

pr_err("%s: invalid index %u\n", __func__, idx);

drivers/phy/realtek/phy-rtk-usb2.c

149

pr_err("%s can't program USB phy\n", __func__);

drivers/phy/realtek/phy-rtk-usb2.c

232

pr_err("%s error page=%d\n", __func__, page);

drivers/phy/realtek/phy-rtk-usb3.c

106

pr_err("%s can't program USB phy\n", __func__);

drivers/phy/rockchip/phy-rockchip-emmc.c

183

pr_err("%s: caldone failed, ret=%d\n", __func__, ret);

drivers/phy/rockchip/phy-rockchip-emmc.c

231

pr_err("%s: dllrdy failed. ret=%d\n", __func__, ret);

drivers/phy/rockchip/phy-rockchip-usb.c

518

pr_err("%s: failed to find usbphy node\n", __func__);

drivers/phy/rockchip/phy-rockchip-usb.c

526

pr_err("%s: usb-uart not available on %s\n",

drivers/phy/rockchip/phy-rockchip-usb.c

537

pr_err("%s: Missing rockchip,grf property, %lu\n",

drivers/phy/rockchip/phy-rockchip-usb.c

544

pr_err("%s: could not init usb_uart, %d\n", __func__, ret);

drivers/phy/ti/phy-omap-control.c

30

pr_err("%s: invalid device\n", __func__);

drivers/phy/ti/phy-omap-control.c

300

pr_err("%s: unable to get sys_clkin\n", __func__);

drivers/phy/ti/phy-omap-control.c

65

pr_err("%s: invalid device\n", __func__);

drivers/pinctrl/core.c

1447

pr_err("failed to register map %s (%d): no device given\n",

drivers/pinctrl/core.c

1453

pr_err("failed to register map %d: no map name given\n",

drivers/pinctrl/core.c

1460

pr_err("failed to register map %s (%d): no pin control device given\n",

drivers/pinctrl/core.c

1480

pr_err("failed to register map %s (%d): invalid type given\n",

drivers/pinctrl/pinconf.c

43

pr_err("failed to register map %s (%d): no group/pin given\n",

drivers/pinctrl/pinconf.c

50

pr_err("failed to register map %s (%d): no configs given\n",

drivers/pinctrl/pinctrl-artpec6.c

420

pr_err("%s: Impossible pin %d\n", __func__, pin);

drivers/pinctrl/pinctrl-falcon.c

308

pr_err("%s: Invalid config param %04x\n",

drivers/pinctrl/pinctrl-tb10x.c

548

pr_err("%pOF: No abilis,function property in device tree.\n",

drivers/pinctrl/pinmux.c

70

pr_err("failed to register map %s (%d): no function given\n",

drivers/pinctrl/qcom/pinctrl-spmi-gpio.c

314

pr_err("function: %d is not defined\n", function);

drivers/pinctrl/qcom/pinctrl-spmi-gpio.c

326

pr_err("LV/MV subtype doesn't have func3/func4\n");

drivers/pinctrl/qcom/tlmm-test.c

586

pr_err("failed to find tlmm reg name\n");

drivers/pinctrl/qcom/tlmm-test.c

626

pr_err("use the tlmm-test.gpio module parameter to specify which GPIO to use\n");

drivers/pinctrl/qcom/tlmm-test.c

632

pr_err("failed to find tlmm node\n");

drivers/pinctrl/qcom/tlmm-test.c

651

pr_err("failed to map TLMM irq %d\n", args.args[0]);

drivers/pinctrl/renesas/core.c

769

pr_err("%s: " fmt, drvname, ##__VA_ARGS__); \

drivers/pinctrl/samsung/pinctrl-exynos-arm.c

81

pr_err("%s: failed to find clock controller DT node\n",

drivers/pinctrl/samsung/pinctrl-exynos-arm.c

89

pr_err("%s: failed to map clock registers\n", __func__);

drivers/pinctrl/samsung/pinctrl-exynos.c

181

pr_err("unsupported external interrupt type\n");

drivers/pinctrl/samsung/pinctrl-s3c64xx.c

363

pr_err("unsupported external interrupt type\n");

drivers/pinctrl/samsung/pinctrl-s3c64xx.c

569

pr_err("unsupported external interrupt type\n");

drivers/pinctrl/spacemit/pinctrl-k1.c

776

pr_err("slew rate conflict with drive strength\n");

drivers/platform/chrome/chromeos_laptop.c

707

pr_err("failed to find DMI device '%s'\n", dmi_name);

drivers/platform/chrome/chromeos_laptop.c

713

pr_err("failed to get data from DMI for '%s'\n", dmi_name);

drivers/platform/chrome/chromeos_laptop.c

926

pr_err("failed to register i2c bus notifier: %d\n",

drivers/platform/chrome/cros_ec_lpc.c

876

pr_err(DRV_NAME ": unsupported system.\n");

drivers/platform/chrome/cros_ec_lpc.c

883

pr_err(DRV_NAME ": can't register driver: %d\n", ret);

drivers/platform/chrome/cros_ec_lpc.c

894

pr_err(DRV_NAME ": can't register device: %d\n", ret);

drivers/platform/chrome/wilco_ec/event.c

534

pr_err(DRV_NAME ": Failed registering class: %d\n", ret);

drivers/platform/chrome/wilco_ec/event.c

541

pr_err(DRV_NAME ": Failed allocating dev numbers: %d\n", ret);

drivers/platform/chrome/wilco_ec/event.c

548

pr_err(DRV_NAME ": Failed registering driver: %d\n", ret);

drivers/platform/chrome/wilco_ec/telemetry.c

434

pr_err(DRV_NAME ": Failed registering class: %d\n", ret);

drivers/platform/chrome/wilco_ec/telemetry.c

441

pr_err(DRV_NAME ": Failed allocating dev numbers: %d\n", ret);

drivers/platform/chrome/wilco_ec/telemetry.c

448

pr_err(DRV_NAME ": Failed registering driver: %d\n", ret);

drivers/platform/cznic/turris-signing-key.c

173

pr_err("Cannot allocate Turris keyring\n");

drivers/platform/loongarch/loongson-laptop.c

101

pr_err("acpi_evalf() called with invalid format character '%c'\n", c);

drivers/platform/loongarch/loongson-laptop.c

128

pr_err("acpi_evalf() called with invalid format character '%c'\n", res_type);

drivers/platform/loongarch/loongson-laptop.c

133

pr_err("acpi_evalf(%s, %s, ...) failed: %s\n",

drivers/platform/loongarch/loongson-laptop.c

165

pr_err("acpi_fetch_acpi_dev(%s) failed\n", sub_driver->name);

drivers/platform/loongarch/loongson-laptop.c

180

pr_err("acpi_install_notify_handler(%s) failed: %s\n",

drivers/platform/loongarch/loongson-laptop.c

279

pr_err("ACPI exception: %s\n", acpi_format_exception(status));

drivers/platform/loongarch/loongson-laptop.c

444

pr_err("Failed to parse keymap from DSDT\n");

drivers/platform/loongarch/loongson-laptop.c

450

pr_err("Failed to setup input device keymap\n");

drivers/platform/loongarch/loongson-laptop.c

570

pr_err("Unable to allocate input device\n");

drivers/platform/loongarch/loongson-laptop.c

597

pr_err("Unable to register input device\n");

drivers/platform/loongarch/loongson-laptop.c

607

pr_err("Loongson Laptop: laptop-backlight device register failed\n");

drivers/platform/loongarch/loongson-laptop.c

76

pr_err("acpi_evalf() called with empty format\n");

drivers/platform/mellanox/mlxbf-bootctl.c

1059

pr_err("Unable to create bootfifo sysfs file, error %d\n", ret);

drivers/platform/mips/cpu_hwmon.c

151

pr_err("hwmon_device_register fail!\n");

drivers/platform/mips/rs780e-acpi.c

141

pr_err("RS780E-ACPI: Failed to request IO Region\n");

drivers/platform/raspberrypi/vchiq-interface/vchiq_arm.c

1453

pr_err("Failed to register %s\n", vchiq_bus_type.name);

drivers/platform/raspberrypi/vchiq-interface/vchiq_arm.c

1459

pr_err("Failed to register vchiq driver\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

1265

pr_err("Incorrect reply type %d\n", rmsg->h.type);

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

1521

pr_err("failed disabling src port(%d)\n", ret);

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

1534

pr_err("failed disconnecting src port\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

1672

pr_err("%s: failed to create component %d (Not enough GPU mem?)\n",

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

1843

pr_err("mmal-vchiq: VCHIQ close failed\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

1889

pr_err("Failed to initialise VCHI instance (status=%d)\n",

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

1896

pr_err("Failed to connect VCHI instance (status=%d)\n", status);

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

1925

pr_err("Failed to open VCHI service connection (status=%d)\n",

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

259

pr_err("%s: ctx: %p, No mmal buffer to pass details\n",

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

310

pr_err("%s: ctx: %p, vchiq_bulk_receive failed %d\n",

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

324

pr_err("bulk.buffer not configured - error in buffer_from_host\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

390

pr_err("%s: msg_context not allocated, buf %p\n", __func__,

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

469

pr_err("drvbuf.client_context(%u) is invalid\n",

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

474

pr_err("MMAL_MSG_TYPE_BUFFER_TO_HOST with bad magic\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

512

pr_err("error %d on bulk submission\n",

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

521

pr_err("message with invalid short payload\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

545

pr_err("%s: bulk ABORTED msg_context:%p\n", __func__, msg_context);

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

564

pr_err("Message callback passed NULL instance\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

595

pr_err("received message context was null!\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

603

pr_err("received invalid message context %u!\n",

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

645

pr_err("Received unhandled message reason %d\n", reason);

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

665

pr_err("payload length %d exceeds max:%d\n", payload_len,

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

693

pr_err("error %d queuing message\n", ret);

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

701

pr_err("timed out waiting for sync completion\n");

drivers/platform/surface/surface3-wmi.c

127

pr_err("duplicate entry %s\n", SPI_TS_OBJ_NAME);

drivers/platform/surface/surface3-wmi.c

75

pr_err("query block returned object type: %d - buffer length:%d\n",

drivers/platform/wmi/core.c

1558

pr_err("Error loading mapper\n");

drivers/platform/x86/acer-wmi.c

1985

pr_err("Could not register Acer backlight device\n");

drivers/platform/x86/acer-wmi.c

2274

pr_err("Error getting keyboard-dock initial status: %s\n",

drivers/platform/x86/acer-wmi.c

2281

pr_err("Unexpected output format getting keyboard-dock initial status\n");

drivers/platform/x86/acer-wmi.c

2287

pr_err("Unexpected output [0]=0x%02x [3]=0x%02x getting keyboard-dock initial status\n",

drivers/platform/x86/acer-wmi.c

3179

pr_err("Unable to detect available WMID devices\n");

drivers/platform/x86/acer-wmi.c

3185

pr_err("No WMID device detection method found\n");

drivers/platform/x86/acer-wmi.c

3193

pr_err("Unable to detect available AMW0 devices\n");

drivers/platform/x86/acer-wmi.c

3202

pr_err("No or unsupported WMI interface, unable to load\n");

drivers/platform/x86/acer-wmi.c

3224

pr_err("Cannot enable EC raw mode\n");

drivers/platform/x86/acer-wmi.c

3228

pr_err("Cannot enable Launch Manager mode\n");

drivers/platform/x86/acer-wmi.c

3246

pr_err("Unable to register platform driver\n");

drivers/platform/x86/acerhdf.c

313

pr_err("invalid fan state %d requested, setting to auto!\n",

drivers/platform/x86/acerhdf.c

334

pr_err("fanon temperature too high, set to %d\n",

drivers/platform/x86/acerhdf.c

340

pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",

drivers/platform/x86/acerhdf.c

350

pr_err("interval too high, set to %d\n",

drivers/platform/x86/acerhdf.c

472

pr_err("error reading temperature, hand off control to BIOS\n");

drivers/platform/x86/acerhdf.c

478

pr_err("error reading fan state, hand off control to BIOS\n");

drivers/platform/x86/acerhdf.c

546

pr_err("error getting hardware information\n");

drivers/platform/x86/acerhdf.c

594

pr_err("unknown (unsupported) BIOS version %s/%s/%s, please report, aborting!\n",

drivers/platform/x86/amd/hfi/hfi.c

297

pr_err("WCT enable failed for CPU %u\n", cpu);

drivers/platform/x86/amd/hfi/hfi.c

322

pr_err("WCT disable failed for CPU %u\n", cpu);

drivers/platform/x86/amd/hfi/hfi.c

526

pr_err("unable to register HFI platform device\n");

drivers/platform/x86/amd/hfi/hfi.c

532

pr_err("failed to register HFI driver\n");

drivers/platform/x86/amd/hsmp/plat.c

323

pr_err("Wrong number of sockets\n");

drivers/platform/x86/amd/pmf/tee-if.c

444

pr_err("Failed to open TEE session err:%#x, rc:%d\n", sess_arg.ret, rc);

drivers/platform/x86/apple-gmux.c

818

pr_err("gmux I/O already in use\n");

drivers/platform/x86/apple-gmux.c

823

pr_err("couldn't remap gmux mmio region");

drivers/platform/x86/apple-gmux.c

842

pr_err("gmux I/O already in use\n");

drivers/platform/x86/apple-gmux.c

903

pr_err("Cannot find acpi handle for pnp device %s\n",

drivers/platform/x86/apple-gmux.c

917

pr_err("Install notify handler failed: %s\n",

drivers/platform/x86/apple-gmux.c

925

pr_err("Cannot enable gpe: %s\n",

drivers/platform/x86/apple-gmux.c

958

pr_err("Failed to register vga_switcheroo handler\n");

drivers/platform/x86/asus-armoury.c

1104

pr_err("Failed to allocate memory for tunables\n");

drivers/platform/x86/asus-armoury.c

174

pr_err("Failed to get %s: %d\n", attr->attr.name, err);

drivers/platform/x86/asus-armoury.c

176

pr_err("Failed to get devstate for 0x%x: %d\n", dev_id, err);

drivers/platform/x86/asus-armoury.c

230

pr_err("Refusing to set APU memory to unsafe value: 0x%x\n", value);

drivers/platform/x86/asus-armoury.c

242

pr_err("Failed to set %s: %d\n", attr->attr.name, err);

drivers/platform/x86/asus-armoury.c

244

pr_err("Failed to set devstate for 0x%x: %d\n", dev_id, err);

drivers/platform/x86/asus-armoury.c

254

pr_err("Failed to set %s: (result): 0x%x\n", attr->attr.name, result);

drivers/platform/x86/asus-armoury.c

365

pr_err("Unrecognized mini-LED device: %u\n", asus_armoury.mini_led_dev_id);

drivers/platform/x86/asus-armoury.c

408

pr_err("Unrecognized mini-LED devid: %u\n", asus_armoury.mini_led_dev_id);

drivers/platform/x86/asus-armoury.c

585

pr_err("Failed to set %s: %d\n", attr->attr.name, err);

drivers/platform/x86/asus-armoury.c

618

pr_err("Failed to change the eGPU status: wmi result is 0x%x\n", result);

drivers/platform/x86/asus-armoury.c

895

pr_err("Failed to create sysfs level attributes\n");

drivers/platform/x86/asus-armoury.c

909

pr_err("Failed to create sysfs-group for mini_led\n");

drivers/platform/x86/asus-armoury.c

924

pr_err("Failed to create sysfs-group for gpu_mux\n");

drivers/platform/x86/asus-armoury.c

951

pr_err("Failed to create sysfs-group for %s\n",

drivers/platform/x86/asus-laptop.c

1493

pr_err("Unable to setup input device keymap\n");

drivers/platform/x86/asus-laptop.c

1699

pr_err("Hotkey initialization failed\n");

drivers/platform/x86/asus-laptop.c

1714

pr_err("Error calling CWAP(%d)\n", wapf);

drivers/platform/x86/asus-laptop.c

1760

pr_err("Hotkey device not present, aborting\n");

drivers/platform/x86/asus-laptop.c

816

pr_err("Could not register asus backlight device\n");

drivers/platform/x86/asus-wmi.c

2179

pr_err("Unable to read PCI config space?\n");

drivers/platform/x86/asus-wmi.c

2264

pr_err("Error removing rfkill notify handler %s\n", node);

drivers/platform/x86/asus-wmi.c

2300

pr_err("Unable to find wifi PCI bus\n");

drivers/platform/x86/asus-wmi.c

2315

pr_err("Unable to register hotplug slot - %d\n", ret);

drivers/platform/x86/asus-wmi.c

2965

pr_err("Unknown fan speed %#x\n", value);

drivers/platform/x86/asus-wmi.c

3350

pr_err("Could not register asus hwmon device\n");

drivers/platform/x86/asus-wmi.c

4350

pr_err("Could not register backlight device\n");

drivers/platform/x86/asus-wmi.c

4485

pr_err("Could not register backlight device\n");

drivers/platform/x86/asus-wmi.c

5153

pr_err("Unable to register notify handler - %d\n", status);

drivers/platform/x86/barco-p50-gpio.c

441

pr_err("failed registering %s: %ld\n", DRIVER_NAME, PTR_ERR(gpio_pdev));

drivers/platform/x86/compal-laptop.c

1035

pr_err("ACPI needs to be enabled for this driver to work!\n");

drivers/platform/x86/compal-laptop.c

1040

pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");

drivers/platform/x86/dell/alienware-wmi-base.c

374

pr_err("LED brightness update failed\n");

drivers/platform/x86/dell/alienware-wmi-wmax.c

388

pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret);

drivers/platform/x86/dell/alienware-wmi-wmax.c

411

pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret);

drivers/platform/x86/dell/alienware-wmi-wmax.c

433

pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret);

drivers/platform/x86/dell/alienware-wmi-wmax.c

483

pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret);

drivers/platform/x86/dell/alienware-wmi-wmax.c

531

pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret);

drivers/platform/x86/dell/alienware-wmi-wmax.c

553

pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret);

drivers/platform/x86/dell/dell-laptop.c

1373

pr_err("Setting old previous keyboard state failed\n");

drivers/platform/x86/dell/dell-smbios-base.c

311

pr_err("No dell-smbios drivers are loaded\n");

drivers/platform/x86/dell/dell-smbios-base.c

580

pr_err("Unable to run on non-Dell system\n");

drivers/platform/x86/dell/dell-smbios-base.c

607

pr_err("No SMBIOS backends available (wmi: %d, smm: %d)\n",

drivers/platform/x86/dell/dell-wmi-aio.c

125

pr_err("Unable to setup input device keymap\n");

drivers/platform/x86/dell/dell-wmi-aio.c

168

pr_err("Unable to register notify handler - %d\n", err);

drivers/platform/x86/dell/dell-wmi-base.c

842

pr_err("Failed to enable WMI events\n");

drivers/platform/x86/dell/dell-wmi-sysman/sysman.c

278

pr_err("Source string returned from BIOS is out of bound!\n");

drivers/platform/x86/dell/dell-wmi-sysman/sysman.c

415

pr_err("Error: Unknown attr_type: %d\n", attr_type);

drivers/platform/x86/dell/dell-wmi-sysman/sysman.c

427

pr_err("Error: Expected ACPI-package type, got: %d\n", obj->type);

drivers/platform/x86/dell/dell-wmi-sysman/sysman.c

433

pr_err("Error: ACPI-package does not have enough elements: %d < %d\n",

drivers/platform/x86/dell/dell-wmi-sysman/sysman.c

525

pr_err("Unable to run on non-Dell system\n");

drivers/platform/x86/dell/dell_rbu.c

389

pr_err("corruption check failed\n");

drivers/platform/x86/dell/dell_rbu.c

582

pr_err("request_firmware_nowait failed %d\n", rc);

drivers/platform/x86/dell/dell_rbu.c

652

pr_err("platform_device_register_simple failed\n");

drivers/platform/x86/eeepc-laptop.c

1079

pr_err("Could not register eeepc hwmon device\n");

drivers/platform/x86/eeepc-laptop.c

1134

pr_err("Could not register eeepc backlight device\n");

drivers/platform/x86/eeepc-laptop.c

1171

pr_err("Unable to setup input device keymap\n");

drivers/platform/x86/eeepc-laptop.c

1177

pr_err("Unable to register input device\n");

drivers/platform/x86/eeepc-laptop.c

1328

pr_err("Hotkey device not present, aborting\n");

drivers/platform/x86/eeepc-laptop.c

1336

pr_err("Hotkey initialization failed\n");

drivers/platform/x86/eeepc-laptop.c

1342

pr_err("Get control methods supported failed\n");

drivers/platform/x86/eeepc-laptop.c

591

pr_err("Unable to read PCI config space?\n");

drivers/platform/x86/eeepc-laptop.c

694

pr_err("Error removing rfkill notify handler %s\n",

drivers/platform/x86/eeepc-laptop.c

732

pr_err("Unable to find wifi PCI bus\n");

drivers/platform/x86/eeepc-laptop.c

740

pr_err("Unable to register hotplug slot - %d\n", ret);

drivers/platform/x86/hp/hp-bioscfg/bioscfg.c

610

pr_err("Error: Unknown attr_type: %d\n", attr_type);

drivers/platform/x86/hp/hp-bioscfg/bioscfg.c

619

pr_err("Error encountered [%d]\n", ret);

drivers/platform/x86/hp/hp-bioscfg/bioscfg.c

665

pr_err("ACPI-package does not have enough elements: %d < %d\n",

drivers/platform/x86/hp/hp-bioscfg/bioscfg.c

916

pr_err("Error: Unknown attr_type: %d\n", attr_type);

drivers/platform/x86/hp/hp-bioscfg/bioscfg.c

939

pr_err("Expected ACPI-package or buffer type, got: %d\n",

drivers/platform/x86/hp/hp-bioscfg/bioscfg.c

970

pr_err("Unable to run on non-HP system\n");

drivers/platform/x86/hp/hp-bioscfg/bioscfg.c

975

pr_err("Unable to set BIOS settings on HP systems\n");

drivers/platform/x86/hp/hp-bioscfg/enum-attributes.c

166

pr_err("Error expected type %d for elem %d, but got type %d instead\n",

drivers/platform/x86/hp/hp-bioscfg/enum-attributes.c

214

pr_err("Error enum-objects package is too small\n");

drivers/platform/x86/hp/hp-bioscfg/enum-attributes.c

262

pr_err("Error enum-objects package is too small\n");

drivers/platform/x86/hp/hp-bioscfg/int-attributes.c

180

pr_err("Error expected type %d for elem %d, but got type %d instead\n",

drivers/platform/x86/hp/hp-bioscfg/int-attributes.c

231

pr_err("Error elem-objects package is too small\n");

drivers/platform/x86/hp/hp-bioscfg/order-list-attributes.c

170

pr_err("Error expected type %d for elem %d, but got type %d instead\n",

drivers/platform/x86/hp/hp-bioscfg/order-list-attributes.c

219

pr_err("Error elem-objects package is too small\n");

drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c

260

pr_err("Error expected type %d for elem %d, but got type %d instead\n",

drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c

307

pr_err("Error elem-objects package is too small\n");

drivers/platform/x86/hp/hp-bioscfg/string-attributes.c

172

pr_err("Error expected type %d for elem %d, but got type %d instead\n",

drivers/platform/x86/hp/hp-bioscfg/string-attributes.c

221

pr_err("Error elem-objects package is too small\n");

drivers/platform/x86/hp/hp-wmi.c

1210

pr_err("Failed to setup camera shutter input device\n");

drivers/platform/x86/hp/hp-wmi.c

1917

pr_err("Failed to set platform profile %d: %d\n", profile, err);

drivers/platform/x86/hp/hp-wmi.c

1925

pr_err("Failed to set GPU profile %d: %d\n", profile, err);

drivers/platform/x86/ibm_rtl.c

125

pr_err("Hardware not responding to "

drivers/platform/x86/intel/hid.c

578

pr_err("Failed to setup Intel HID switches\n");

drivers/platform/x86/intel/hid.c

731

pr_err("Failed to setup Intel HID hotkeys\n");

drivers/platform/x86/intel/hid.c

740

pr_err("Failed to setup Intel 5 button array hotkeys\n");

drivers/platform/x86/intel/hid.c

748

pr_err("Failed to setup Intel HID switches\n");

drivers/platform/x86/intel/oaktrail.c

298

pr_err("ACPI needs to be enabled for this driver to work!\n");

drivers/platform/x86/intel/oaktrail.c

303

pr_err("Platform not recognized (You could try the module's force-parameter)");

drivers/platform/x86/intel/telemetry/debugfs.c

656

pr_err("Failed to read S0ix residency");

drivers/platform/x86/intel/telemetry/debugfs.c

674

pr_err("Get PSS Trace Verbosity Failed with Error %d\n", err);

drivers/platform/x86/intel/telemetry/debugfs.c

695

pr_err("Changing PSS Trace Verbosity Failed. Error %d\n", err);

drivers/platform/x86/intel/telemetry/debugfs.c

722

pr_err("Get IOSS Trace Verbosity Failed with Error %d\n", err);

drivers/platform/x86/intel/telemetry/debugfs.c

743

pr_err("Changing IOSS Trace Verbosity Failed. Error %d\n", err);

drivers/platform/x86/intel/telemetry/debugfs.c

829

pr_err("Wrong s0ix counters detected\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

239

pr_err("Unknown Telemetry action specified %d\n", action);

drivers/platform/x86/intel/telemetry/pltdrv.c

290

pr_err("IOSS TELEM_CTRL Read Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

301

pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

316

pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

326

pr_err("IOSS TELEM_RESET Fail for data: %x\n",

drivers/platform/x86/intel/telemetry/pltdrv.c

344

pr_err("IOSS TELEM_CTRL Event Disable Write Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

357

pr_err("IOSS TELEM_UPDATE Fail for Evt%x\n",

drivers/platform/x86/intel/telemetry/pltdrv.c

376

pr_err("IOSS TELEM_ADD Fail for Event %x\n",

drivers/platform/x86/intel/telemetry/pltdrv.c

394

pr_err("IOSS TELEM_CTRL Event Enable Write Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

421

pr_err("PSS TELEM_CTRL Read Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

430

pr_err("PSS TELEM_CTRL Event Disable Write Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

443

pr_err("PSS TELEM_CTRL Event Disable Write Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

452

pr_err("PSS TELEM_RESET Fail for Event %x\n",

drivers/platform/x86/intel/telemetry/pltdrv.c

469

pr_err("PSS TELEM_CTRL Event Disable Write Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

482

pr_err("PSS TELEM_UPDATE Fail for Event %x\n",

drivers/platform/x86/intel/telemetry/pltdrv.c

502

pr_err("PSS TELEM_ADD Fail for Event %x\n",

drivers/platform/x86/intel/telemetry/pltdrv.c

519

pr_err("PSS TELEM_CTRL Event Enable Write Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

659

pr_err("Ssram under update. Please Try Later\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

674

pr_err("Ssram under update. Please Try Later\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

679

pr_err("Timeout while reading Events\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

708

pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit);

drivers/platform/x86/intel/telemetry/pltdrv.c

776

pr_err("PSS TRACE_CTRL Read Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

787

pr_err("IOSS TRACE_CTL Read Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

794

pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit);

drivers/platform/x86/intel/telemetry/pltdrv.c

820

pr_err("PSS TRACE_CTRL Read Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

831

pr_err("PSS TRACE_CTRL Verbosity Set Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

841

pr_err("IOSS TRACE_CTL Read Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

852

pr_err("IOSS TRACE_CTL Verbosity Set Failed\n");

drivers/platform/x86/intel/telemetry/pltdrv.c

858

pr_err("Unknown Telemetry Unit Specified %d\n", telem_unit);

drivers/platform/x86/intel/vbtn.c

308

pr_err("Failed to setup Intel Virtual Button\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

11167

pr_err("Unexpected value %d in switch statement\n", pos_status);

drivers/platform/x86/lenovo/thinkpad_acpi.c

11480

pr_err("Error retrieving camera shutter state after shutter event\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

11622

pr_err("unable to create proc entry %s\n", ibm->name);

drivers/platform/x86/lenovo/thinkpad_acpi.c

11827

pr_err("Not yet supported ThinkPad detected!\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

1208

pr_err("failed to allocate memory for rfkill class\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

12157

pr_err("unable to register input device\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

12167

pr_err("unable to register hwmon device\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

1218

pr_err("failed to read initial state for %s, error %d\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

12184

pr_err("unable to get DMI data: %d\n", ret);

drivers/platform/x86/lenovo/thinkpad_acpi.c

12225

pr_err("unable to create proc dir " TPACPI_PROC_DIR "\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

12240

pr_err("unable to register platform device\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

12247

pr_err("unable to register main platform driver\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

12259

pr_err("unable to register hwmon platform device/driver bundle\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

1233

pr_err("failed to register %s rfkill switch: %d\n", name, res);

drivers/platform/x86/lenovo/thinkpad_acpi.c

2010

pr_err("Unknown multi mode status type %d with value 0x%04X, please report this to %s\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

2045

pr_err("Unknown/reserved multi mode value 0x%04X for type %d, please report this to %s\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

2598

pr_err("could not create kernel thread for hotkey polling\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

2836

pr_err("hotkey_source_mask: failed to update the firmware event mask!\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

3119

pr_err("failed to restore hot key mask to BIOS defaults\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

3378

pr_err("missing MHKA handler, please report this to %s\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

3395

pr_err("missing MHKA handler, please report this to %s\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

3418

pr_err("unknown version of the HKEY interface: 0x%x\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

3420

pr_err("please report this to %s\n", TPACPI_MAIL);

drivers/platform/x86/lenovo/thinkpad_acpi.c

3592

pr_err("Cannot read adaptive keyboard mode\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

3606

pr_err("Cannot set adaptive keyboard mode\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

3883

pr_err("unknown HKEY notification event %d\n", event);

drivers/platform/x86/lenovo/thinkpad_acpi.c

3894

pr_err("failed to retrieve HKEY event\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

3983

pr_err("Cannot read adaptive keyboard mode.\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

3995

pr_err("error while attempting to reset the event firmware interface\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

4009

pr_err("Cannot set adaptive keyboard mode.\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

4050

pr_err("Please remove the hotkey=enable module parameter, it is deprecated. Hotkeys are always enabled.\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

4765

pr_err("error while trying to restore original video autoswitch mode\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

4837

pr_err("video auto-switch left enabled due to error\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

4906

pr_err("video auto-switch left enabled due to error\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

5822

pr_err("Out of memory for LED data\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

6093

pr_err("ThinkPad ACPI EC access misbehaving, falling back to ACPI TMPx access mode\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

6096

pr_err("ThinkPad ACPI EC access misbehaving, disabling thermal sensors access\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

627

pr_err("acpi_evalf() called with empty format\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

652

pr_err("acpi_evalf() called with invalid format character '%c'\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

681

pr_err("acpi_evalf() called with invalid format character '%c'\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

6867

pr_err("Could not register backlight device\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

687

pr_err("acpi_evalf(%s, %s, ...) failed: %s\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

7443

pr_err("Failed to create ALSA card structures: %d\n", rc);

drivers/platform/x86/lenovo/thinkpad_acpi.c

7475

pr_err("Failed to create ALSA volume control: %d\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

7485

pr_err("Failed to create ALSA mute control: %d\n", rc);

drivers/platform/x86/lenovo/thinkpad_acpi.c

7492

pr_err("Failed to register ALSA card: %d\n", rc);

drivers/platform/x86/lenovo/thinkpad_acpi.c

7548

pr_err("UCMS step volume mode not implemented, please contact %s\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

7615

pr_err("Could not create the ALSA mixer interface\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

837

pr_err("acpi_fetch_acpi_dev(%s) failed\n", ibm->name);

drivers/platform/x86/lenovo/thinkpad_acpi.c

853

pr_err("acpi_install_notify_handler(%s) failed: %s\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

8560

pr_err("fan watchdog: error %d while enabling fan, will try again later...\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

878

pr_err("failed to allocate memory for ibm->acpi->driver\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

889

pr_err("acpi_bus_register_driver(%s) failed: %d\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

8965

pr_err("ThinkPad ACPI EC access misbehaving, fan status and control unavailable\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

9209

pr_err("level command accepted for unsupported access mode %d\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

9225

pr_err("enable command accepted for unsupported access mode %d\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

9240

pr_err("disable command accepted for unsupported access mode %d\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

9260

pr_err("speed command accepted for unsupported access mode %d\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

9579

pr_err("failed to set charge threshold on battery %d",

drivers/platform/x86/lenovo/thinkpad_acpi.c

9586

pr_err("failed to set stop threshold: %d", battery);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9596

pr_err("failed to set force discharge on %d", battery);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9612

pr_err("failed to set inhibit charge on %d", battery);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9668

pr_err("Error probing battery %d\n", battery);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9681

pr_err("Error probing battery %d\n", battery);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9687

pr_err("Error probing battery stop; %d\n", battery);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9697

pr_err("Error probing battery stop: %d\n", battery);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9703

pr_err("Error probing battery discharge; %d\n", battery);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9713

pr_err("Error probing battery inhibit charge; %d\n", battery);

drivers/platform/x86/lg-laptop.c

132

pr_err("Cannot get handle");

drivers/platform/x86/lg-laptop.c

801

pr_err("unable to register platform device\n");

drivers/platform/x86/meraki-mx100.c

309

pr_err("failed to register software nodes: %d\n", err);

drivers/platform/x86/meraki-mx100.c

317

pr_err("failed to create LED device: %d\n", err);

drivers/platform/x86/meraki-mx100.c

325

pr_err("failed to create key device: %d\n", err);

drivers/platform/x86/msi-laptop.c

1001

pr_err("Unable to install key filter\n");

drivers/platform/x86/msi-wmi.c

106

pr_err("query block returned object "

drivers/platform/x86/msi-wmi.c

140

pr_err("Could not query backlight: %d\n", err);

drivers/platform/x86/msi-wmi.c

152

pr_err("get: Invalid brightness value: 0x%X\n", ret);

drivers/platform/x86/msi-wmi.c

281

pr_err("Unable to setup input device\n");

drivers/platform/x86/msi-wmi.c

288

pr_err("Unable to setup WMI notify handler\n");

drivers/platform/x86/msi-wmi.c

301

pr_err("Unable to setup backlight device\n");

drivers/platform/x86/msi-wmi.c

308

pr_err("This machine doesn't have neither MSI-hotkeys nor backlight through WMI\n");

drivers/platform/x86/panasonic-laptop.c

1010

pr_err("num_sifr %d out of range %d - 255\n", num_sifr, SINF_DC_CUR_BRIGHT + 1);

drivers/platform/x86/panasonic-laptop.c

1022

pr_err("Couldn't allocate mem for pcc");

drivers/platform/x86/panasonic-laptop.c

1041

pr_err("Error installing keyinput handler\n");

drivers/platform/x86/panasonic-laptop.c

1047

pr_err("Couldn't retrieve BIOS data\n");

drivers/platform/x86/panasonic-laptop.c

325

pr_err("evaluation error HKEY.SQTY\n");

drivers/platform/x86/panasonic-laptop.c

340

pr_err("evaluation error HKEY.SINF\n");

drivers/platform/x86/panasonic-laptop.c

346

pr_err("Invalid HKEY.SINF\n");

drivers/platform/x86/panasonic-laptop.c

352

pr_err("SQTY reports bad SINF length SQTY: %lu SINF-pkg-count: %u\n",

drivers/platform/x86/panasonic-laptop.c

363

pr_err("Invalid HKEY.SINF data\n");

drivers/platform/x86/panasonic-laptop.c

452

pr_err("evaluation error _SB.STAT\n");

drivers/platform/x86/panasonic-laptop.c

492

pr_err("evaluation error _SB.CDDR\n");

drivers/platform/x86/panasonic-laptop.c

499

pr_err("evaluation error _SB.FBAY\n");

drivers/platform/x86/panasonic-laptop.c

662

pr_err("%s evaluation failed\n", METHOD_ECWR);

drivers/platform/x86/panasonic-laptop.c

845

pr_err("error getting hotkey status\n");

drivers/platform/x86/panasonic-laptop.c

869

pr_err("Unknown hotkey event: 0x%04llx\n", result);

drivers/platform/x86/panasonic-laptop.c

906

pr_err("Failed to register notify on %s\n", node);

drivers/platform/x86/panasonic-laptop.c

925

pr_err("Error removing optd notify handler %s\n",

drivers/platform/x86/panasonic-laptop.c

948

pr_err("Unable to setup input device keymap\n");

drivers/platform/x86/panasonic-laptop.c

954

pr_err("Unable to register input device\n");

drivers/platform/x86/pcengines-apuv2.c

274

pr_err("failed registering %s: %d\n", name, err);

drivers/platform/x86/pcengines-apuv2.c

286

pr_err("failed to detect APU board via DMI\n");

drivers/platform/x86/pcengines-apuv2.c

292

pr_err("failed to register software nodes: %d\n", err);

drivers/platform/x86/pmc_atom.c

467

pr_err("%s is in D0 prior to s2idle\n",

drivers/platform/x86/pmc_atom.c

513

pr_err("clock %d is ON prior to freeze (ctl 0x%08x)\n", i, ctl);

drivers/platform/x86/samsung-laptop.c

1485

pr_err("Can't map the segment at 0xf0000\n");

drivers/platform/x86/samsung-laptop.c

1503

pr_err("This computer does not support SABI\n");

drivers/platform/x86/samsung-laptop.c

1524

pr_err("Can't remap %x\n", ifaceP);

drivers/platform/x86/serdev_helpers.h

51

pr_err("error could not find '%s' device\n", name);

drivers/platform/x86/serdev_helpers.h

72

pr_err("error could not get %s/%s serial-ctrl adev\n",

drivers/platform/x86/serdev_helpers.h

81

pr_err("error could not get %s/%s serial-ctrl physical node\n",

drivers/platform/x86/silicom-platform.c

975

pr_err("No DMI match for this platform\n");

drivers/platform/x86/sony-laptop.c

1194

pr_err("Event 0x%x outside of capabilities list\n",

drivers/platform/x86/sony-laptop.c

1323

pr_err("couldn't set up touchpad control function (%d)\n",

drivers/platform/x86/sony-laptop.c

1331

pr_err("couldn't set up battery care function (%d)\n",

drivers/platform/x86/sony-laptop.c

1338

pr_err("couldn't set up lid resume function (%d)\n",

drivers/platform/x86/sony-laptop.c

1344

pr_err("couldn't set up thermal profile function (%d)\n",

drivers/platform/x86/sony-laptop.c

1352

pr_err("couldn't set up GFX Switch status (%d)\n",

drivers/platform/x86/sony-laptop.c

1358

pr_err("couldn't set up high speed charging function (%d)\n",

drivers/platform/x86/sony-laptop.c

1365

pr_err("couldn't set up rfkill support (%d)\n",

drivers/platform/x86/sony-laptop.c

1376

pr_err("couldn't set up keyboard backlight function (%d)\n",

drivers/platform/x86/sony-laptop.c

1382

pr_err("couldn't set up low battery function (%d)\n",

drivers/platform/x86/sony-laptop.c

1388

pr_err("couldn't set up fan speed function (%d)\n",

drivers/platform/x86/sony-laptop.c

1394

pr_err("couldn't set up USB charge support (%d)\n",

drivers/platform/x86/sony-laptop.c

1400

pr_err("couldn't set up panel ID function (%d)\n",

drivers/platform/x86/sony-laptop.c

1406

pr_err("couldn't set up smart connect support (%d)\n",

drivers/platform/x86/sony-laptop.c

1556

pr_err("%s: %d\n", __func__, ret);

drivers/platform/x86/sony-laptop.c

3189

pr_err("Unable to create input devices\n");

drivers/platform/x86/sony-laptop.c

4116

pr_err("kfifo_alloc failed\n");

drivers/platform/x86/sony-laptop.c

4126

pr_err("misc_register failed\n");

drivers/platform/x86/sony-laptop.c

4223

pr_err("Unknown SPIC Type, more than 2 IO Ports\n");

drivers/platform/x86/sony-laptop.c

4383

pr_err("Error evaluating _SRS\n");

drivers/platform/x86/sony-laptop.c

4474

pr_err("Couldn't disable device\n");

drivers/platform/x86/sony-laptop.c

4521

pr_err("Unable to read possible resources\n");

drivers/platform/x86/sony-laptop.c

4528

pr_err("Unable to create input devices\n");

drivers/platform/x86/sony-laptop.c

454

pr_err("kfifo_alloc failed\n");

drivers/platform/x86/sony-laptop.c

4570

pr_err("Failed to request_region\n");

drivers/platform/x86/sony-laptop.c

4590

pr_err("Failed to request_irq\n");

drivers/platform/x86/sony-laptop.c

4598

pr_err("Couldn't enable device\n");

drivers/platform/x86/sony-laptop.c

4711

pr_err("Unable to register SPIC driver\n");

drivers/platform/x86/sony-laptop.c

4719

pr_err("Unable to register SNC driver\n");

drivers/platform/x86/sony-laptop.c

748

pr_err("Failed to evaluate [%s]\n", method);

drivers/platform/x86/topstar-laptop.c

158

pr_err("Unable to setup input device keymap\n");

drivers/platform/x86/topstar-laptop.c

164

pr_err("Unable to register input device\n");

drivers/platform/x86/topstar-laptop.c

228

pr_err("Unable to switch FNCX notifications\n");

drivers/platform/x86/toshiba-wmi.c

108

pr_err("Failed to setup input device\n");

drivers/platform/x86/toshiba_acpi.c

1004

pr_err("ACPI call to get Sleep and Music failed\n");

drivers/platform/x86/toshiba_acpi.c

1021

pr_err("ACPI call to set Sleep and Music failed\n");

drivers/platform/x86/toshiba_acpi.c

1039

pr_err("ACPI call to get KBD function keys failed\n");

drivers/platform/x86/toshiba_acpi.c

1056

pr_err("ACPI call to set KBD function keys failed\n");

drivers/platform/x86/toshiba_acpi.c

1074

pr_err("ACPI call to get Panel Power ON failed\n");

drivers/platform/x86/toshiba_acpi.c

1091

pr_err("ACPI call to set Panel Power ON failed\n");

drivers/platform/x86/toshiba_acpi.c

1109

pr_err("ACPI call to get USB 3 failed\n");

drivers/platform/x86/toshiba_acpi.c

1126

pr_err("ACPI call to set USB 3 failed\n");

drivers/platform/x86/toshiba_acpi.c

1143

pr_err("ACPI call to get System type failed\n");

drivers/platform/x86/toshiba_acpi.c

1169

pr_err("ACPI call to get Wireless status failed\n");

drivers/platform/x86/toshiba_acpi.c

1206

pr_err("ACPI call to get WWAN status failed\n");

drivers/platform/x86/toshiba_acpi.c

1225

pr_err("ACPI call to set WWAN status failed\n");

drivers/platform/x86/toshiba_acpi.c

1243

pr_err("ACPI call to set WWAN power failed\n");

drivers/platform/x86/toshiba_acpi.c

1265

pr_err("ACPI call to get Cooling Method failed\n");

drivers/platform/x86/toshiba_acpi.c

1281

pr_err("ACPI call to get Cooling Method failed\n");

drivers/platform/x86/toshiba_acpi.c

1294

pr_err("ACPI call to set Cooling Method failed\n");

drivers/platform/x86/toshiba_acpi.c

1313

pr_err("ACPI call to get Battery Charge Mode failed\n");

drivers/platform/x86/toshiba_acpi.c

1333

pr_err("ACPI call to get Battery Charge Mode failed\n");

drivers/platform/x86/toshiba_acpi.c

1357

pr_err("ACPI call to set Battery Charge Mode failed\n");

drivers/platform/x86/toshiba_acpi.c

1371

pr_err("ACPI call to get Transflective Backlight failed\n");

drivers/platform/x86/toshiba_acpi.c

1383

pr_err("ACPI call to set Transflective Backlight failed\n");

drivers/platform/x86/toshiba_acpi.c

1411

pr_err("ACPI call to get LCD Brightness failed\n");

drivers/platform/x86/toshiba_acpi.c

1439

pr_err("Error reading LCD brightness\n");

drivers/platform/x86/toshiba_acpi.c

1470

pr_err("ACPI call to set LCD Brightness failed\n");

drivers/platform/x86/toshiba_acpi.c

1523

pr_err("ACPI call to get Video-Out failed\n");

drivers/platform/x86/toshiba_acpi.c

1628

pr_err("ACPI call to get Fan status failed\n");

drivers/platform/x86/toshiba_acpi.c

1640

pr_err("ACPI call to set Fan status failed\n");

drivers/platform/x86/toshiba_acpi.c

1707

pr_err("ACPI call to get Fan speed failed\n");

drivers/platform/x86/toshiba_acpi.c

2496

pr_err("Unable to update sysfs entries\n");

drivers/platform/x86/toshiba_acpi.c

2597

pr_err("ACPI call to query SMM registers failed\n");

drivers/platform/x86/toshiba_acpi.c

2706

pr_err("Unable to allocate WWAN rfkill device\n");

drivers/platform/x86/toshiba_acpi.c

2714

pr_err("Unable to register WWAN rfkill device\n");

drivers/platform/x86/toshiba_acpi.c

2784

pr_err("ACPI NTFY method execution failed\n");

drivers/platform/x86/toshiba_acpi.c

2798

pr_err("ACPI INFO method execution failed\n");

drivers/platform/x86/toshiba_acpi.c

2825

pr_err("Failed to query hotkey event\n");

drivers/platform/x86/toshiba_acpi.c

2920

pr_err("Error installing key filter\n");

drivers/platform/x86/toshiba_acpi.c

3006

pr_err("Could not register toshiba backlight device\n");

drivers/platform/x86/toshiba_acpi.c

3072

pr_err("Toshiba ACPI object invalid\n");

drivers/platform/x86/toshiba_acpi.c

3096

pr_err("Toshiba ACPI object invalid\n");

drivers/platform/x86/toshiba_acpi.c

3126

pr_err("Init order issue\n");

drivers/platform/x86/toshiba_acpi.c

3320

pr_err("HCI interface not found\n");

drivers/platform/x86/toshiba_acpi.c

3335

pr_err("Failed to register miscdevice\n");

drivers/platform/x86/toshiba_acpi.c

3406

pr_err("Unable to allocate iio device\n");

drivers/platform/x86/toshiba_acpi.c

3421

pr_err("Unable to register iio device\n");

drivers/platform/x86/toshiba_acpi.c

3534

pr_err("Unable to update sysfs entries\n");

drivers/platform/x86/toshiba_acpi.c

3633

pr_err("Unable to create proc dir " PROC_TOSHIBA "\n");

drivers/platform/x86/toshiba_acpi.c

3639

pr_err("Failed to register ACPI driver: %d\n", ret);

drivers/platform/x86/toshiba_acpi.c

392

pr_err("ACPI call to open SCI failed\n");

drivers/platform/x86/toshiba_acpi.c

429

pr_err("ACPI call to close SCI failed\n");

drivers/platform/x86/toshiba_acpi.c

479

pr_err("ACPI call to query Illumination support failed\n");

drivers/platform/x86/toshiba_acpi.c

506

pr_err("ACPI call for illumination failed\n");

drivers/platform/x86/toshiba_acpi.c

524

pr_err("ACPI call for illumination failed\n");

drivers/platform/x86/toshiba_acpi.c

549

pr_err("ACPI call to query kbd illumination support failed\n");

drivers/platform/x86/toshiba_acpi.c

584

pr_err("ACPI call to set KBD backlight status failed\n");

drivers/platform/x86/toshiba_acpi.c

601

pr_err("ACPI call to get KBD backlight status failed\n");

drivers/platform/x86/toshiba_acpi.c

618

pr_err("ACPI call to get the keyboard backlight failed\n");

drivers/platform/x86/toshiba_acpi.c

639

pr_err("ACPI call to set KBD Illumination mode failed\n");

drivers/platform/x86/toshiba_acpi.c

653

pr_err("ACPI call to set the touchpad failed\n");

drivers/platform/x86/toshiba_acpi.c

670

pr_err("ACPI call to query the touchpad failed\n");

drivers/platform/x86/toshiba_acpi.c

688

pr_err("ACPI call to get ECO led failed\n");

drivers/platform/x86/toshiba_acpi.c

708

pr_err("ACPI call to get ECO led failed\n");

drivers/platform/x86/toshiba_acpi.c

730

pr_err("ACPI call to get ECO led failed\n");

drivers/platform/x86/toshiba_acpi.c

753

pr_err("ACPI call to set ECO led failed\n");

drivers/platform/x86/toshiba_acpi.c

771

pr_err("ACPI call to query the accelerometer failed\n");

drivers/platform/x86/toshiba_acpi.c

791

pr_err("ACPI call to query the accelerometer failed\n");

drivers/platform/x86/toshiba_acpi.c

821

pr_err("ACPI call to get USB Sleep and Charge mode failed\n");

drivers/platform/x86/toshiba_acpi.c

837

pr_err("ACPI call to get USB Sleep and Charge mode failed\n");

drivers/platform/x86/toshiba_acpi.c

860

pr_err("ACPI call to set USB S&C mode failed\n");

drivers/platform/x86/toshiba_acpi.c

878

pr_err("ACPI call to set USB S&C mode failed\n");

drivers/platform/x86/toshiba_acpi.c

899

pr_err("ACPI call to get USB S&C battery level failed\n");

drivers/platform/x86/toshiba_acpi.c

930

pr_err("ACPI call to set USB S&C battery level failed\n");

drivers/platform/x86/toshiba_acpi.c

954

pr_err("ACPI call to get USB Rapid Charge failed\n");

drivers/platform/x86/toshiba_acpi.c

984

pr_err("ACPI call to set USB Rapid Charge failed\n");

drivers/platform/x86/toshiba_bluetooth.c

109

pr_err("Could not attach USB Bluetooth device\n");

drivers/platform/x86/toshiba_bluetooth.c

115

pr_err("Could not power ON Bluetooth device\n");

drivers/platform/x86/toshiba_bluetooth.c

128

pr_err("Could not power OFF Bluetooth device\n");

drivers/platform/x86/toshiba_bluetooth.c

134

pr_err("Could not detach USB Bluetooth device\n");

drivers/platform/x86/toshiba_bluetooth.c

148

pr_err("Could not sync bluetooth device status\n");

drivers/platform/x86/toshiba_bluetooth.c

264

pr_err("Unable to allocate rfkill device\n");

drivers/platform/x86/toshiba_bluetooth.c

273

pr_err("Unable to register rfkill device\n");

drivers/platform/x86/toshiba_bluetooth.c

77

pr_err("ACPI call to query Bluetooth presence failed\n");

drivers/platform/x86/toshiba_bluetooth.c

96

pr_err("Could not get Bluetooth device status\n");

drivers/platform/x86/toshiba_haps.c

161

pr_err("ACPI call to query HDD protection failed\n");

drivers/platform/x86/toshiba_haps.c

35

pr_err("Unable to reset the HDD protection\n");

drivers/platform/x86/toshiba_haps.c

48

pr_err("Error while setting the protection level\n");

drivers/platform/x86/touchscreen_dmi.c

1960

pr_err("Invalid '%s' value for 'i2c_touchscreen_props='\n", orig_str);

drivers/platform/x86/touchscreen_dmi.c

1997

pr_err("%s: failed to register i2c bus notifier: %d\n",

drivers/platform/x86/winmate-fm07-keys.c

160

pr_err("fm07keys: failed to register driver, err=%d\n", ret);

drivers/platform/x86/winmate-fm07-keys.c

167

pr_err("fm07keys: failed to allocate device, err = %d\n", ret);

drivers/platform/x86/wireless-hotkey.c

102

pr_err("Failed to setup wireless hotkeys\n");

drivers/platform/x86/x86-android-tablets/core.c

109

pr_err("error %d getting IRQ %s %d\n", irq, data->chip, data->index);

drivers/platform/x86/x86-android-tablets/core.c

124

pr_err("error could not get %s handle\n", data->chip);

drivers/platform/x86/x86-android-tablets/core.c

130

pr_err("error could not get %s adev\n", data->chip);

drivers/platform/x86/x86-android-tablets/core.c

137

pr_err("error could not find IRQ domain for %s\n", data->chip);

drivers/platform/x86/x86-android-tablets/core.c

168

pr_err("Error could not get %s handle\n", client_info->adapter_path);

drivers/platform/x86/x86-android-tablets/core.c

188

pr_err("Error could not find %s PCI device\n", client_info->adapter_path);

drivers/platform/x86/x86-android-tablets/core.c

221

pr_err("error could not get %s adapter\n", client_info->adapter_path);

drivers/platform/x86/x86-android-tablets/core.c

249

pr_err("Error could not get %s handle\n", spi_dev_info->ctrl_path);

drivers/platform/x86/x86-android-tablets/core.c

255

pr_err("Error could not get adev for %s\n", spi_dev_info->ctrl_path);

drivers/platform/x86/x86-android-tablets/core.c

261

pr_err("Error could not get SPI controller for %s\n", spi_dev_info->ctrl_path);

drivers/platform/x86/x86-android-tablets/core.c

280

pr_err("error could not get PCI serdev at devfn 0x%02x\n", info->ctrl.pci.devfn);

drivers/platform/x86/x86-android-tablets/core.c

306

pr_err("error could not get %s serdev adev\n", info->serdev_hid);

drivers/platform/x86/x86-android-tablets/core.c

66

pr_err("error %ld getting GPIO %s %d\n", PTR_ERR(gpiod), chip, pin);

drivers/platform/x86/x86-android-tablets/core.c

97

pr_err("error %d getting APIC IRQ %d\n", irq, data->index);

drivers/platform/x86/x86-android-tablets/lenovo.c

530

pr_err("error cannot find %s device\n", LENOVO_YOGA_TAB2_830_1050_CODEC_NAME);

drivers/pmdomain/amlogic/meson-secure-pwrc.c

62

pr_err("failed to get power domain status\n");

drivers/pmdomain/amlogic/meson-secure-pwrc.c

75

pr_err("failed to set power domain off\n");

drivers/pmdomain/amlogic/meson-secure-pwrc.c

90

pr_err("failed to set power domain on\n");

drivers/pmdomain/core.c

2444

pr_err("always-on PM domain %s is not on\n", genpd->name);

drivers/pmdomain/core.c

2476

pr_err("Provider present, unable to remove %s\n", dev_name(&genpd->dev));

drivers/pmdomain/core.c

2482

pr_err("%s: unable to remove %s\n", __func__, dev_name(&genpd->dev));

drivers/pmdomain/core.c

2605

pr_err("%s: invalid domain index %u\n", __func__, idx);

drivers/pmdomain/core.c

3437

pr_err("Parsing idle state node %pOF failed with err %d\n",

drivers/pmdomain/core.c

427

pr_err("%s: Failed to roll back to %d performance state\n",

drivers/pmdomain/imx/gpc.c

119

pr_err("powerup request on domain %s timed out\n", genpd->name);

drivers/pmdomain/imx/gpc.c

97

pr_err("%s: failed to enable regulator: %d\n",

drivers/pmdomain/qcom/cpr.c

1028

pr_err("%s: missing 'qcom,opp-fuse-level' property\n",

drivers/pmdomain/renesas/rcar-gen4-sysc.c

102

pr_err("\n %s : Can not clear IRQ flags in SYSCISCR", __func__);

drivers/pmdomain/renesas/rcar-gen4-sysc.c

274

pr_err("Failed to init PM domain %s: %d\n", name, error);

drivers/pmdomain/renesas/rcar-sysc.c

264

pr_err("Failed to init PM domain %s: %d\n", name, error);

drivers/pmdomain/samsung/exynos-pm-domains.c

55

pr_err("Power domain %s %s failed\n", domain->name, op);

drivers/pmdomain/ti/omap_prm.c

839

pr_err("%s: timedout waiting for %s:%lu\n", __func__,

drivers/pmdomain/ti/omap_prm.c

849

pr_err("%s: timedout waiting for %s:%lu\n", __func__,

drivers/pmdomain/ti/ti_sci_pm_domains.c

172

pr_err("%s: invalid domain index %u\n", __func__, idx);

drivers/power/reset/axxia-reset.c

54

pr_err("%pOFn: syscon lookup failed\n", dev->of_node);

drivers/power/reset/brcmstb-reboot.c

39

pr_err("failed to write rst_src_en (%d)\n", rc);

drivers/power/reset/brcmstb-reboot.c

45

pr_err("failed to read rst_src_en (%d)\n", rc);

drivers/power/reset/brcmstb-reboot.c

51

pr_err("failed to write sw_mstr_rst (%d)\n", rc);

drivers/power/reset/brcmstb-reboot.c

57

pr_err("failed to read sw_mstr_rst (%d)\n", rc);

drivers/power/reset/brcmstb-reboot.c

82

pr_err("failed to get match data\n");

drivers/power/reset/brcmstb-reboot.c

88

pr_err("failed to get syscon phandle\n");

drivers/power/reset/hisi-reboot.c

52

pr_err("failed to find reboot-offset property\n");

drivers/power/reset/qnap-poweroff.c

57

pr_err("%s: triggering power-off...\n", __func__);

drivers/power/sequencing/core.c

1082

pr_err("Failed to register the power sequencer bus\n");

drivers/power/supply/charger-manager.c

1002

pr_err("Cannot find cable for type %s", cable->name);

drivers/power/supply/charger-manager.c

1011

pr_err("Cannot register extcon_dev for %s (cable: %s)\n",

drivers/power/supply/charger-manager.c

924

pr_err("Cannot set current limit of %s (%s)\n",

drivers/power/supply/charger-manager.c

990

pr_err("Cannot find extcon_dev for %s (cable: %s)\n",

drivers/power/supply/max17042_battery.c

520

pr_err("%s: err %d\n", __func__, ret);

drivers/power/supply/olpc_battery.c

540

pr_err("olpc-battery: "

drivers/power/supply/qcom_battmgr.c

1247

pr_err("Unknown battery technology '%s'\n", chemistry);

drivers/power/supply/test_power.c

334

pr_err("registering battery extension failed\n");

drivers/power/supply/test_power.c

357

pr_err("%s: failed to register %s\n", __func__,

drivers/powercap/dtpm.c

144

pr_err("Failed to update power for '%s': %d\n",

drivers/powercap/dtpm.c

428

pr_err("Failed to register dtpm node '%s': %d\n",

drivers/powercap/dtpm.c

445

pr_err("Failed to find '%s'\n", hierarchy->name);

drivers/powercap/dtpm.c

456

pr_err("Failed to setup '%s': %d\n", dtpm_subsys[i]->name, ret);

drivers/powercap/dtpm.c

563

pr_err("Failed to register control type\n");

drivers/powercap/dtpm_devfreq.c

158

pr_err("No energy model available for '%s'\n", dev_name(dev));

drivers/powercap/dtpm_devfreq.c

173

pr_err("Failed to register '%s': %d\n", dev_name(dev), ret);

drivers/powercap/dtpm_devfreq.c

182

pr_err("Failed to add QoS request: %d\n", ret);

drivers/powercap/idle_inject.c

348

pr_err("cpu%d is already registered\n", cpu);

drivers/powercap/intel_rapl_common.c

1081

pr_err("Invalid floor frequency config register\n");

drivers/powercap/intel_rapl_common.c

1162

pr_err("Failed to read power unit REG 0x%llx on %s:%s, exit.\n",

drivers/powercap/intel_rapl_common.c

1370

pr_err("no package domain found, unknown topology!\n");

drivers/powercap/intel_rapl_common.c

1425

pr_err("invalid domain id %d\n", domain);

drivers/powercap/intel_rapl_common.c

1451

pr_err("No valid Unit register found\n");

drivers/powercap/intel_rapl_common.c

1458

pr_err("missing .check_unit() callback\n");

drivers/powercap/intel_rapl_common.c

2188

pr_err("topology_logical_(package/die)_id() returned a negative value");

drivers/powercap/intel_rapl_common.c

2226

pr_err("topology_logical_(package/die)_id() returned a negative value");

drivers/powercap/intel_rapl_common.c

450

pr_err("Cannot find matching power limit for constraint %d\n", cid);

drivers/powercap/intel_rapl_common.c

947

pr_err("Failed to read power unit REG 0x%llx on %s:%s, exit.\n",

drivers/powercap/intel_rapl_common.c

975

pr_err("Failed to read power unit REG 0x%llx on %s:%s, exit.\n",

drivers/powercap/intel_rapl_msr.c

202

pr_err("intel-rapl does not support CPU vendor %d\n", boot_cpu_data.x86_vendor);

drivers/pps/clients/pps-ktimer.c

70

pr_err("cannot register PPS source\n");

drivers/pps/clients/pps-ldisc.c

123

pr_err("can't register PPS line discipline\n");

drivers/pps/clients/pps-ldisc.c

60

pr_err("cannot register PPS source \"%s\"\n", info.path);

drivers/pps/clients/pps-ldisc.c

68

pr_err("cannot open tty ldisc \"%s\"\n", info.path);

drivers/pps/clients/pps_parport.c

140

pr_err("clear_wait value should be not greater then %d\n",

drivers/pps/clients/pps_parport.c

147

pr_err("memory allocation failed, not attaching\n");

drivers/pps/clients/pps_parport.c

164

pr_err("couldn't register with %s\n", port->name);

drivers/pps/clients/pps_parport.c

169

pr_err("couldn't claim %s\n", port->name);

drivers/pps/clients/pps_parport.c

176

pr_err("couldn't register PPS source\n");

drivers/pps/generators/pps_gen.c

168

pr_err("too many PPS sources in the system\n");

drivers/pps/generators/pps_gen.c

182

pr_err("failed to add char device %d:%d\n",

drivers/pps/generators/pps_gen.c

247

pr_err(" unable to create char device\n");

drivers/pps/generators/pps_gen.c

257

pr_err("unable to register generator\n");

drivers/pps/generators/pps_gen.c

320

pr_err("failed to allocate class\n");

drivers/pps/generators/pps_gen.c

328

pr_err("failed to allocate char device region\n");

drivers/pps/kapi.c

110

pr_err("%s: unable to create char device\n",

drivers/pps/kapi.c

120

pr_err("%s: unable to register source\n", info->name);

drivers/pps/kapi.c

73

pr_err("%s: unsupported default parameters\n",

drivers/pps/kapi.c

79

pr_err("%s: unspecified time format\n",

drivers/pps/pps.c

373

pr_err("%s: too many PPS sources in the system\n",

drivers/pps/pps.c

471

pr_err("failed to allocate class\n");

drivers/pps/pps.c

479

pr_err("failed to allocate char device region\n");

drivers/ptp/ptp_chardev.c

109

pr_err("driver cannot use function %u and channel %u on pin %u\n",

drivers/ptp/ptp_clock.c

130

pr_err("ptp: physical clock is free running\n");

drivers/ptp/ptp_clock.c

388

pr_err("failed to create ptp aux_worker %d\n", err);

drivers/ptp/ptp_clock.c

423

pr_err("failed to register pps source\n");

drivers/ptp/ptp_clock.c

450

pr_err("failed to create posix clock\n");

drivers/ptp/ptp_clock.c

688

pr_err("ptp: failed to allocate class\n");

drivers/ptp/ptp_clock.c

694

pr_err("ptp: failed to allocate device region\n");

drivers/ptp/ptp_kvm_common.c

143

pr_err("fail to initialize ptp_kvm");

drivers/ptp/ptp_ocp.c

4938

pr_err(KBUILD_MODNAME ": failed to register %s: %d\n", what, err);

drivers/ptp/ptp_qoriq.c

433

pr_err("error reference clock value, or lower than 100MHz\n");

drivers/ptp/ptp_qoriq.c

626

pr_err("irq not in device tree\n");

drivers/ptp/ptp_qoriq.c

631

pr_err("request_irq failed\n");

drivers/ptp/ptp_qoriq.c

637

pr_err("no resource\n");

drivers/ptp/ptp_qoriq.c

641

pr_err("resource busy\n");

drivers/ptp/ptp_qoriq.c

648

pr_err("ioremap ptp registers failed\n");

drivers/ptp/ptp_vmw.c

90

pr_err("failed to register ptp clock\n");

drivers/pwm/core.c

1799

pr_err("%s(): can't parse \"pwms\" property\n", __func__);

drivers/pwm/core.c

1806

pr_err("%s(): PWM chip not found\n", __func__);

drivers/pwm/core.c

2743

pr_err("Failed to initialize chrdev region for PWM usage\n");

drivers/pwm/core.c

2749

pr_err("Failed to initialize PWM class (%pe)\n", ERR_PTR(ret));

drivers/rapidio/devices/rio_mport_cdev.c

80

pr_err(DRV_PREFIX "%s ERROR " fmt "\n", __func__, ##arg)

drivers/rapidio/rio-scan.c

387

pr_err("RIO: Component Tag Counter Overflow\n");

drivers/rapidio/rio-scan.c

856

pr_err("RIO: failed to allocate destID table\n");

drivers/rapidio/rio.c

1236

pr_err("RIO: Route trace for %s failed\n",

drivers/rapidio/rio.c

1248

pr_err("RIO_PW: Bad switch initialization for %s\n",

drivers/rapidio/rio.c

1810

pr_err("%s: prep_rio_sg == NULL\n", __func__);

drivers/rapidio/rio.c

1999

pr_err("RIO: unable allocate rio_wq\n");

drivers/rapidio/rio.c

2042

pr_err("RIO: reached specified max number of mports\n");

drivers/rapidio/rio.c

2128

pr_err("RIO: %s unexpected state transition for mport %s\n",

drivers/rapidio/rio_cm.c

66

pr_err(DRV_NAME ": %s ERROR " fmt "\n", __func__, ##arg)

drivers/ras/cec.c

368

pr_err("Soft-offlining pfn: 0x%llx\n", pfn);

drivers/ras/cec.c

575

pr_err("Error allocating CE array page!\n");

drivers/regulator/ab8500-ext.c

459

pr_err("Failed to register ab8500 ext regulator: %d\n", ret);

drivers/regulator/ab8500.c

1750

pr_err("Failed to register ab8500 regulator: %d\n", ret);

drivers/regulator/core.c

5418

pr_err("Failed to enable %s: %pe\n", consumers[i].supply,

drivers/regulator/core.c

5456

pr_err("Failed to disable %s: %pe\n", consumers[i].supply, ERR_PTR(ret));

drivers/regulator/core.c

5460

pr_err("Failed to re-enable %s: %pe\n",

drivers/regulator/da903x-regulator.c

196

pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);

drivers/regulator/dbx500-prcmu.c

43

pr_err("power state: unbalanced enable/disable calls\n");

drivers/regulator/dummy.c

52

pr_err("Failed to register regulator: %d\n", ret);

drivers/regulator/dummy.c

69

pr_err("Failed to allocate dummy regulator device\n");

drivers/regulator/internal.h

21

pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)

drivers/regulator/mcp16502.c

169

pr_err("%s: %d invalid\n", __func__, mode);

drivers/regulator/of_regulator.c

201

pr_err("%pOFn: invalid mode %u\n", np, pval);

drivers/regulator/of_regulator.c

218

pr_err("%pOFn: couldn't read allowed modes index %d, ret=%d\n",

drivers/regulator/of_regulator.c

224

pr_err("%pOFn: invalid regulator-allowed-modes element %u\n",

drivers/regulator/of_regulator.c

291

pr_err("%pOFn: invalid mode %u\n",

drivers/regulator/vctrl-regulator.c

65

pr_err("vctrl: failed to get control voltage\n");

drivers/regulator/wm831x-isink.c

201

pr_err("Failed to register WM831x ISINK driver: %d\n", ret);

drivers/remoteproc/qcom_pil_info.c

52

pr_err("failed to map PIL relocation info region\n");

drivers/remoteproc/remoteproc_cdev.c

125

pr_err("Failed to alloc rproc_cdev region, err %d\n", ret);

drivers/remoteproc/remoteproc_core.c

1911

pr_err("invalid rproc handle\n");

drivers/remoteproc/remoteproc_core.c

2700

pr_err("NULL rproc pointer\n");

drivers/remoteproc/remoteproc_core.c

2762

pr_err("remoteproc: creation of rproc_recovery_wq failed\n");

drivers/remoteproc/remoteproc_sysfs.c

268

pr_err("remoteproc: unable to register class\n");

drivers/resctrl/mpam_devices.c

1724

pr_err("Failed to register cpuhp callbacks");

drivers/resctrl/mpam_devices.c

2516

pr_err("Failed to allocate configuration arrays.\n");

drivers/resctrl/mpam_devices.c

2713

pr_err("No MSC devices found in firmware\n");

drivers/reset/core.c

904

pr_err("reset-gpio code does not support GPIO flags %u for GPIO %u\n",

drivers/reset/reset-socfpga.c

64

pr_err("unable to register device\n");

drivers/rpmsg/qcom_glink_native.c

856

pr_err("%s channel not found for cid %d\n", __func__, cid);

drivers/rpmsg/qcom_glink_smem.c

245

pr_err("failed to register glink edge\n");

drivers/rpmsg/qcom_glink_smem.c

76

pr_err("failed to acquire RX fifo handle: %ld\n",

drivers/rpmsg/qcom_smd.c

1500

pr_err("failed to register smd edge\n");

drivers/rpmsg/rpmsg_char.c

544

pr_err("failed to allocate char dev region\n");

drivers/rpmsg/rpmsg_char.c

550

pr_err("rpmsg: failed to register rpmsg raw driver\n");

drivers/rpmsg/rpmsg_core.c

646

pr_err("failed to register rpmsg class\n");

drivers/rpmsg/rpmsg_core.c

652

pr_err("failed to register rpmsg bus: %d\n", ret);

drivers/rpmsg/rpmsg_ctrl.c

222

pr_err("failed to allocate char dev region\n");

drivers/rpmsg/rpmsg_ctrl.c

228

pr_err("failed to register rpmsg driver\n");

drivers/rpmsg/rpmsg_ns.c

109

pr_err("%s: Failed to register rpmsg driver\n", __func__);

drivers/rpmsg/virtio_rpmsg_bus.c

1010

pr_err("failed to register virtio driver: %d\n", ret);

drivers/rtc/dev.c

566

pr_err("failed to allocate char dev region\n");

drivers/rtc/rtc-ds3232.c

720

pr_err("Failed to register ds3232 driver: %d\n", ret);

drivers/rtc/rtc-ds3232.c

726

pr_err("Failed to register ds3234 driver: %d\n", ret);

drivers/rtc/rtc-fsl-ftm-alarm.c

216

pr_err("Out of alarm range {0~262} seconds.\n");

drivers/rtc/rtc-gamecube.c

240

pr_err("no io memory range found\n");

drivers/rtc/rtc-gamecube.c

246

pr_err("failed to ioremap hw_srnprot\n");

drivers/rtc/rtc-gamecube.c

280

pr_err("failed to get the RTC bias\n");

drivers/rtc/rtc-imx-sm-bbm.c

86

pr_err("Unexpected bbm event: %s\n", __func__);

drivers/rtc/rtc-opal.c

125

pr_err("Failed to get the async token\n");

drivers/rtc/rtc-opal.c

187

pr_err("Failed to get the async token\n");

drivers/rtc/rtc-pcf2127.c

1622

pr_err("Failed to register pcf2127 i2c driver: %d\n", ret);

drivers/rtc/rtc-pcf2127.c

1628

pr_err("Failed to register pcf2127 spi driver: %d\n", ret);

drivers/rtc/rtc-rs5c313.c

356

pr_err("invalid value, resetting to 1 Jan 2000\n");

drivers/rtc/rtc-twl.c

164

pr_err("Could not read TWL register %X - error %d\n", reg, ret);

drivers/rtc/rtc-twl.c

177

pr_err("Could not write TWL register %X - error %d\n",

drivers/s390/block/dasd_devmap.c

140

pr_err("The IPL device is not a CCW device\n");

drivers/s390/block/dasd_devmap.c

344

pr_err("%s is not a valid device range\n", range);

drivers/s390/block/dasd_erp.c

99

pr_err("%s: default ERP has run out of retries and failed\n",

drivers/s390/block/dcssblk.c

267

pr_err("Adjacent DCSSs %s and %s are not "

drivers/s390/block/dcssblk.c

280

pr_err("DCSS %s and DCSS %s have "

drivers/s390/block/dcssblk.c

379

pr_err("DCSS %s is of type SC and cannot be "

drivers/s390/block/dcssblk.c

404

pr_err("DCSS device %s is removed after a failed access mode "

drivers/s390/block/scm_blk.c

366

pr_err("An I/O operation to SCM failed with rc=%d\n",

drivers/s390/char/hmcdrv_cache.c

224

pr_err("Allocating the requested cache size of %zu bytes failed\n",

drivers/s390/char/monreader.c

164

pr_err("Reading monitor data failed with rc=%i\n", rc);

drivers/s390/char/monreader.c

241

pr_err("z/VM *MONITOR system service disconnected with rc=%i\n",

drivers/s390/char/monreader.c

300

pr_err("Connecting to the z/VM *MONITOR system service "

drivers/s390/char/monreader.c

459

pr_err("The z/VM *MONITOR record device driver cannot be "

drivers/s390/char/monreader.c

469

pr_err("The z/VM *MONITOR record device driver failed to "

drivers/s390/char/monreader.c

480

pr_err("The specified *MONITOR DCSS %s does not have the "

drivers/s390/char/monwriter.c

76

pr_err("Writing monitor data failed with rc=%i\n", rc);

drivers/s390/char/sclp_config.c

120

pr_err("Open for Business request failed with response code "

drivers/s390/char/sclp_sdias.c

131

pr_err("sclp_send failed for get_nr_blocks\n");

drivers/s390/char/sclp_sdias.c

145

pr_err("SCLP error: %x\n", sdias_evbuf.event_status);

drivers/s390/char/sclp_sdias.c

198

pr_err("sclp_send failed: %x\n", rc);

drivers/s390/char/sclp_sdias.c

218

pr_err("Error from SCLP while copying hsa. Event status = %x\n",

drivers/s390/char/vmlogrdr.c

179

pr_err("vmlogrdr: connection severed with reason %i\n", reason);

drivers/s390/char/vmlogrdr.c

357

pr_err("vmlogrdr: iucv connection to %s "

drivers/s390/char/vmlogrdr.c

813

pr_err("not running under VM, driver not loaded.\n");

drivers/s390/char/vmur.c

1012

pr_err("The %s cannot be loaded without z/VM\n",

drivers/s390/char/vmur.c

1036

pr_err("Kernel function alloc_chrdev_region failed with "

drivers/s390/cio/chsc.c

453

pr_err("Link stopped: RS=%02x RSID=%04x IC=%02x "

drivers/s390/cio/vfio_ccw_drv.c

58

pr_err("vfio_ccw: could not quiesce subchannel 0.%x.%04x!\n",

drivers/s390/cio/vfio_ccw_fsm.c

188

pr_err("vfio-ccw: FSM: I/O request from state:%d\n", private->state);

drivers/s390/cio/vfio_ccw_fsm.c

209

pr_err("vfio-ccw: FSM: %s request from state:%d\n",

drivers/s390/crypto/ap_queue.c

78

pr_err("Registering adapter interrupts for AP device %02x.%04x failed\n",

drivers/s390/crypto/zcrypt_msgtype50.c

356

pr_err("Crypto dev=%02x.%04x code=0x%02x => online=0 rc=EAGAIN\n",

drivers/s390/crypto/zcrypt_msgtype50.c

389

pr_err("Crypto dev=%02x.%04x unknown response type 0x%02x => online=0 rc=EAGAIN\n",

drivers/s390/crypto/zcrypt_msgtype6.c

586

pr_err("Crypto dev=%02x.%04x rc/rs=%d/%d online=0 rc=EAGAIN\n",

drivers/s390/crypto/zcrypt_msgtype6.c

728

pr_err("Crypto dev=%02x.%04x unknown response type 0x%02x => online=0 rc=EAGAIN\n",

drivers/s390/crypto/zcrypt_msgtype6.c

763

pr_err("Crypto dev=%02x.%04x unknown response type 0x%02x => online=0 rc=EAGAIN\n",

drivers/s390/crypto/zcrypt_msgtype6.c

793

pr_err("Crypto dev=%02x.%04x unknown response type 0x%02x => online=0 rc=EAGAIN\n",

drivers/s390/crypto/zcrypt_msgtype6.c

824

pr_err("Crypto dev=%02x.%04x unknown response type 0x%02x => online=0 rc=EAGAIN\n",

drivers/s390/net/ctcm_fsms.c

202

pr_err("%s: The specified target device is not valid\n",

drivers/s390/net/ctcm_fsms.c

207

pr_err("An I/O operation resulted in error %04x\n",

drivers/s390/net/ctcm_main.c

1769

pr_err("%s / Initializing the ctcm device driver failed, ret = %d\n",

drivers/s390/net/qeth_core_main.c

7161

pr_err("Initializing the qeth device driver failed\n");

drivers/s390/scsi/zfcp_aux.c

121

pr_err("%s is not a valid SCSI device\n", devstr);

drivers/s390/scsi/zfcp_aux.c

150

pr_err("The zfcp device driver could not register with "

drivers/sbus/char/oradax.c

43

#define dax_err(fmt, ...) pr_err("%s: " fmt "\n", __func__, ##__VA_ARGS__)

drivers/scsi/NCR5380.c

778

pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",

drivers/scsi/NCR5380.c

785

pr_err("scsi%d: BASR %02x\n", instance->host_no,

drivers/scsi/NCR5380.c

787

pr_err("scsi%d: bus stuck in data phase -- probably a single byte overrun!\n",

drivers/scsi/aacraid/commctrl.c

660

pr_err("aacraid: upsg->sg[%d].count=%u>%u\n",

drivers/scsi/aacraid/linit.c

1067

pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME);

drivers/scsi/aacraid/linit.c

1561

pr_err("aacraid: unable to register \"aac\" device.\n");

drivers/scsi/aacraid/linit.c

702

pr_err("%s: Host adapter abort request (%d,%d,%d,%d)\n",

drivers/scsi/aacraid/linit.c

756

pr_err("%s: Host adapter abort request timed out\n",

drivers/scsi/aacraid/linit.c

759

pr_err(

drivers/scsi/aacraid/linit.c

928

pr_err("%s: Host device reset request. SCSI hang ?\n",

drivers/scsi/aacraid/linit.c

991

pr_err("%s: Host target reset request. SCSI hang ?\n",

drivers/scsi/arcmsr/arcmsr_hba.c

4116

pr_err("arcmsr%d: can't set driver mode.\n",

drivers/scsi/atari_scsi.c

780

pr_err(PFX "can't allocate ST-RAM double buffer\n");

drivers/scsi/atari_scsi.c

807

pr_err(PFX "request irq %d failed, aborting\n",

drivers/scsi/be2iscsi/be_iscsi.c

1157

pr_err("beiscsi_ep_connect shost is NULL\n");

drivers/scsi/be2iscsi/be_iscsi.c

50

pr_err("beiscsi_session_create: invalid ep\n");

drivers/scsi/bnx2fc/bnx2fc_fcoe.c

1764

pr_err(PFX "Unknown device id 0x%x\n", pdev->device);

drivers/scsi/bnx2fc/bnx2fc_fcoe.c

2077

pr_err(PFX "__bnx2fc_disable: lport not found\n");

drivers/scsi/bnx2fc/bnx2fc_fcoe.c

2105

pr_err(PFX "bnx2fc_disable: interface not found\n");

drivers/scsi/bnx2fc/bnx2fc_fcoe.c

2175

pr_err(PFX "__bnx2fc_enable: lport not found\n");

drivers/scsi/bnx2fc/bnx2fc_fcoe.c

2232

pr_err(PFX "bnx2fc_enable: interface not found\n");

drivers/scsi/bnx2fc/bnx2fc_hwi.c

1010

pr_err(PFX "ERROR:xid out of range\n");

drivers/scsi/bnx2fc/bnx2fc_io.c

1717

pr_err("bd_count = %d exceeded FW supported max BD(255), task_id = 0x%x\n",

drivers/scsi/bnx2fc/bnx2fc_io.c

192

pr_err(PFX "0x%x: sc_cmd->device is NULL.\n", io_req->xid);

drivers/scsi/bnx2fc/bnx2fc_io.c

196

pr_err(PFX "0x%x: sc_cmd->device->host is NULL.\n",

drivers/scsi/bnx2fc/bnx2fc_tgt.c

144

pr_err(PFX "enable session failed\n");

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

1143

pr_err("cdev 0x%p, clear ddp, %u,%d/%u, skb OOM.\n",

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

1233

pr_err("%s, failed to get iscsi param %d.\n",

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

1267

pr_err("T3 %s fail to set iscsi param %d.\n",

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

779

pr_err("%s: tid %u, CPL_ISCSI_HDR, skb len %u < %u.\n",

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

789

pr_err("%s: tid %u, copy cpl_ddp %u-%zu failed %d.\n",

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

814

pr_err("%s: tid %u, cp %zu/%u failed %d.\n",

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

974

pr_err("NO l2t available.\n");

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

981

pr_err("NO atid available.\n");

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1056

pr_err("NO matching conn. atid %u, tid %u.\n", atid, tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1102

pr_err("can't find connection for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1123

pr_err("can't find connection for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1163

pr_err("can't find connection for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1234

pr_err("can't find connection for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1237

pr_err("csk 0x%p, tid %u, rcv cpl_rx_data.\n", csk, tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1256

pr_err("can't find conn. for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1362

pr_err("can't find conn. for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1458

pr_err("can't find connection for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1479

pr_err("tid 0x%x, rcv RX_DATA_DDP w/o pdu bhs.\n", csk->tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1526

pr_err("can't find connection for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1563

pr_err("Error! freelist data not found 0x%p, tid %u\n",

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1613

pr_err("can't find connection for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1634

pr_err("can't find conn. for tid %u.\n", tid);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1643

pr_err("csk 0x%p,%u, SET_TCB_RPL status %u.\n",

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1793

pr_err("address family 0x%x not supported\n", csk->csk_family);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1800

pr_err("%s, can't get neighbour of csk->dst.\n", ndev->name);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1809

pr_err("%s, NO atid available.\n", ndev->name);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1825

pr_err("%s, cannot alloc l2t.\n", ndev->name);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

1898

pr_err("%s, try_module_get failed.\n", ndev->name);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

2005

pr_err("%s: %s idx %u, npods %u, OOM.\n",

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

2342

pr_err("No handler for opcode 0x%x.\n", opc);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

904

pr_err("NO conn. for atid %u, cdev 0x%p.\n", atid, cdev);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

909

pr_err("bad conn atid %u, csk 0x%p,%u,0x%lx,tid %u, atid %u.\n",

drivers/scsi/cxgbi/libcxgbi.c

1014

pr_err("csk 0x%p,%u,0x%lx,%u, bad state.\n",

drivers/scsi/cxgbi/libcxgbi.c

1041

pr_err("csk 0x%p,%u,0x%lx,%u, cr %u,%u+%u, empty.\n",

drivers/scsi/cxgbi/libcxgbi.c

1136

pr_err("csk 0x%p, tid %u, credit %u + %u != %u.\n",

drivers/scsi/cxgbi/libcxgbi.c

1666

pr_err("coalesced bhs, csk 0x%p, skb 0x%p,%u, "

drivers/scsi/cxgbi/libcxgbi.c

1676

pr_err("coalesced data, csk 0x%p, skb 0x%p,%u, "

drivers/scsi/cxgbi/libcxgbi.c

1684

pr_err("bhs, csk 0x%p, skb 0x%p,%u, "

drivers/scsi/cxgbi/libcxgbi.c

1697

pr_err("csk 0x%p, skb 0x%p,%u, f 0x%lx,"

drivers/scsi/cxgbi/libcxgbi.c

1709

pr_err("data, csk 0x%p, skb 0x%p,%u, "

drivers/scsi/cxgbi/libcxgbi.c

1903

pr_err("task 0x%p, tcp_task 0x%p, tdata 0x%p.\n",

drivers/scsi/cxgbi/libcxgbi.c

1908

pr_err("task 0x%p, csk gone.\n", task);

drivers/scsi/cxgbi/libcxgbi.c

2004

pr_err("task 0x%p, tcp_task 0x%p, tdata 0x%p, "

drivers/scsi/cxgbi/libcxgbi.c

2159

pr_err("task 0x%p,0x%p, tcp_task 0x%p, tdata 0x%p/0x%p.\n",

drivers/scsi/cxgbi/libcxgbi.c

2196

pr_err("task 0x%p,0x%p, tcp_task 0x%p, tdata 0x%p/0x%p "

drivers/scsi/cxgbi/libcxgbi.c

2308

pr_err("csk 0x%p, skb head %u < %u.\n",

drivers/scsi/cxgbi/libcxgbi.c

2317

pr_err("csk 0x%p, frags %u, %u,%u >%u.\n",

drivers/scsi/cxgbi/libcxgbi.c

2375

pr_err("task 0x%p,0x%p, tcp_task 0x%p, tdata 0x%p/0x%p.\n",

drivers/scsi/cxgbi/libcxgbi.c

2406

pr_err("task 0x%p, ppod writing using ofldq failed.\n",

drivers/scsi/cxgbi/libcxgbi.c

2556

pr_err("MaxRecvDataSegmentLength %u > %u.\n",

drivers/scsi/cxgbi/libcxgbi.c

2737

pr_err("missing endpoint.\n");

drivers/scsi/cxgbi/libcxgbi.c

2996

pr_err("unable to register %s transport 0x%p.\n",

drivers/scsi/cxgbi/libcxgbi.c

448

pr_err("cdev 0x%p, p#%u %s, NO port map.\n",

drivers/scsi/cxgbi/libcxgbi.c

459

pr_err("source port NON-ZERO %u.\n",

drivers/scsi/cxgbi/libcxgbi.c

516

pr_err("cdev 0x%p, p#%u %s, port %u OOR.\n",

drivers/scsi/cxgbi/libcxgbi.c

949

pr_err("csk 0x%p,%u,0x%lx,%u,ABT_RPL_RSS.\n",

drivers/scsi/cxgbi/libcxgbi.c

982

pr_err("csk 0x%p,%u,0x%lx,%u, bad state.\n",

drivers/scsi/elx/efct/efct_driver.c

210

pr_err("Device is not attached\n");

drivers/scsi/elx/efct/efct_driver.c

39

pr_err("efct_scsi_tgt_init failed rc=%d\n", rc);

drivers/scsi/elx/efct/efct_driver.c

46

pr_err("failed to register to FC host\n");

drivers/scsi/elx/efct/efct_driver.c

753

pr_err("efct_device_init failed rc=%d\n", rc);

drivers/scsi/elx/efct/efct_driver.c

759

pr_err("pci_register_driver failed rc=%d\n", rc);

drivers/scsi/elx/efct/efct_hw.c

2709

pr_err("HIO alloc failed\n");

drivers/scsi/elx/efct/efct_hw.c

2853

pr_err("bad parm hw=%p io=%p\n", hw, io);

drivers/scsi/elx/efct/efct_lio.c

100

pr_err("%s: Unable to find EFCT device\n", __func__);

drivers/scsi/elx/efct/efct_lio.c

1490

pr_err("kstrtoul() failed with ret: %d\n", ret); \

drivers/scsi/elx/efct/efct_lio.c

1495

pr_err("Illegal boolean value %lu\n", val); \

drivers/scsi/elx/efct/efct_lio.c

1546

pr_err("kstrtoul() failed with ret: %d\n", ret); \

drivers/scsi/elx/efct/efct_lio.c

1551

pr_err("Illegal boolean value %lu\n", val); \

drivers/scsi/elx/efct/efct_lio.c

162

pr_err("Unable to find vport\n");

drivers/scsi/elx/efct/efct_lio.c

1664

pr_err("target_fabric_configfs_register failed with %d\n", rc);

drivers/scsi/elx/efct/efct_lio.c

1669

pr_err("target_fabric_configfs_register failed with %d\n", rc);

drivers/scsi/elx/efct/efct_lio.c

743

pr_err("cannot find EFCT for base wwpn %s\n", name);

drivers/scsi/elx/efct/efct_lio.c

780

pr_err("Unable to find separator operator(@)\n");

drivers/scsi/elx/efct/efct_lio.c

795

pr_err("cannot find EFCT for base wwpn %s\n", name);

drivers/scsi/elx/efct/efct_scsi.c

117

pr_err("%s: IO can not be NULL\n", __func__);

drivers/scsi/elx/efct/efct_xport.c

1008

pr_err("%s: vport delete failed\n", __func__);

drivers/scsi/elx/efct/efct_xport.c

196

pr_err("%s: failed to locate EFCT device\n", __func__);

drivers/scsi/elx/efct/efct_xport.c

448

pr_err("failed to attach EFCT with fc transport\n");

drivers/scsi/elx/efct/efct_xport.c

461

pr_err("failed to attach EFCT with fc transport\n");

drivers/scsi/elx/efct/efct_xport.c

472

pr_err("%s: failed to attach to scsi_transport_*", __func__);

drivers/scsi/elx/efct/efct_xport.c

478

pr_err("%s: failed to attach to scsi_transport_*", __func__);

drivers/scsi/elx/efct/efct_xport.c

651

pr_err("releasing transport layer\n");

drivers/scsi/elx/efct/efct_xport.c

817

pr_err("efct_xport_status returned non 0 - %d\n", rc);

drivers/scsi/elx/efct/efct_xport.c

867

pr_err("efct_xport_status returned non 0 - %d\n", rc);

drivers/scsi/elx/efct/efct_xport.c

878

pr_err("%s: shost=%p vport=%p efct=%p\n", __func__,

drivers/scsi/fnic/fnic_debugfs.c

117

pr_err("fnic: Cannot read to any debugfs file\n");

drivers/scsi/fnic/fnic_debugfs.c

168

pr_err("fnic: cannot write to any debugfs file\n");

drivers/scsi/fnic/fnic_main.c

1276

pr_err("fnic fdls frame cache create failed\n");

drivers/scsi/fnic/fnic_main.c

1285

pr_err("fnic fdls frame elem cache create failed\n");

drivers/scsi/fnic/fnic_main.c

1310

pr_err("reset fnic work queue create failed\n");

drivers/scsi/fnic/fnic_scsi.c

1934

pr_err("rport is NULL\n");

drivers/scsi/fnic/fnic_scsi.c

1942

pr_err(

drivers/scsi/fnic/fnic_scsi.c

1946

pr_err(

drivers/scsi/fnic/fnic_scsi.c

1949

pr_err(

drivers/scsi/fnic/fnic_trace.c

617

pr_err("fnic: Failed to allocate memory for "

drivers/scsi/fnic/fnic_trace.c

627

pr_err("fnic:Failed to allocate memory for page_offset\n");

drivers/scsi/fnic/fnic_trace.c

629

pr_err("fnic: Freeing FC Control Trace Buf\n");

drivers/scsi/fnic/vnic_dev.c

329

pr_err("%s: devcmd2 invalid posted or fetch index on cmd %d\n",

drivers/scsi/fnic/vnic_dev.c

331

pr_err("%s: fetch index: %u, posted index: %u\n",

drivers/scsi/fnic/vnic_dev.c

341

pr_err("%s: devcmd2 wq full while issuing cmd %d\n",

drivers/scsi/fnic/vnic_dev.c

343

pr_err("%s: fetch index: %u, posted index: %u\n",

drivers/scsi/fnic/vnic_dev.c

386

pr_err("%s:Error %d devcmd %d\n",

drivers/scsi/fnic/vnic_dev.c

400

pr_err("%s:Timed out devcmd %d\n", pci_name(vdev->pdev), _CMD_N(cmd));

drivers/scsi/fnic/vnic_dev.c

438

pr_err("error in devcmd2 init");

drivers/scsi/fnic/vnic_dev.c

739

pr_err("Can't add addr [%pM], %d\n", addr, err);

drivers/scsi/fnic/vnic_dev.c

754

pr_err("Can't del addr [%pM], %d\n", addr, err);

drivers/scsi/fnic/vnic_dev.c

939

pr_err("fnic: DEVCMD2 resource found!\n");

drivers/scsi/fnic/vnic_dev.c

942

pr_err("fnic: DEVCMD2 not found, fall back to Devcmd\n");

drivers/scsi/fnic/vnic_wq.c

130

pr_err("Failed to get devcmd2 resource\n");

drivers/scsi/g_NCR5380.c

364

pr_err(DRV_MODULE_NAME ": unknown register offsets\n");

drivers/scsi/hisi_sas/hisi_sas_main.c

2034

pr_err("Internal abort: timeout %016llx\n",

drivers/scsi/hisi_sas/hisi_sas_main.c

2053

pr_err("Internal abort: timeout and not done %016llx. Queuing reset.\n",

drivers/scsi/hisi_sas/hisi_sas_main.c

2057

pr_err("Internal abort: timeout and not done %016llx.\n",

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c

4025

pr_err("rc %d from get_system_info\n", rc);

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c

4031

pr_err("failed class register\n");

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c

4037

pr_err("rc %d from target_register_template\n", rc);

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c

4043

pr_err("rc %d from vio_register_driver\n", rc);

drivers/scsi/ibmvscsi_tgt/libsrp.c

175

pr_err("fail to map %p %d\n", iue,

drivers/scsi/ibmvscsi_tgt/libsrp.c

223

pr_err("Can't get dma memory %u\n",

drivers/scsi/ibmvscsi_tgt/libsrp.c

234

pr_err("Error copying indirect table %d\n", err);

drivers/scsi/ibmvscsi_tgt/libsrp.c

238

pr_err("This command uses external indirect buffer\n");

drivers/scsi/ibmvscsi_tgt/libsrp.c

247

pr_err("fail to map %p %d\n", iue,

drivers/scsi/ibmvscsi_tgt/libsrp.c

287

pr_err("client error. Invalid data_out_format %x\n", fmt);

drivers/scsi/ibmvscsi_tgt/libsrp.c

333

pr_err("Unknown format %d %x\n", dir, format);

drivers/scsi/ibmvscsi_tgt/libsrp.c

367

pr_err("invalid data format %x\n", fmt);

drivers/scsi/libfc/fc_exch.c

937

pr_err("host%u: lport %6.6x: xid %d invalid CPU %d\n:",

drivers/scsi/libsas/sas_ata.c

584

pr_err("ata host alloc failed.\n");

drivers/scsi/libsas/sas_ata.c

592

pr_err("ata_port_alloc failed.\n");

drivers/scsi/libsas/sas_ata.c

693

pr_err("ex %016llx phy%02d SATA device could not set linkrate (%d)\n",

drivers/scsi/libsas/sas_discover.c

491

pr_err("unhandled device %d\n", dev->dev_type);

drivers/scsi/libsas/sas_expander.c

2145

pr_err("%s: can we send a smp request to a device?\n",

drivers/scsi/libsas/sas_expander.c

2152

pr_err("%s: fail to find a domain_device?\n", __func__);

drivers/scsi/libsas/sas_expander.c

604

pr_err("ex %016llx phy%02d PHY control failed: %d\n",

drivers/scsi/libsas/sas_expander.c

607

pr_err("ex %016llx phy%02d PHY control failed: function result 0x%x\n",

drivers/scsi/libsas/sas_port.c

163

pr_err("%s: couldn't find a free port, bug?\n",

drivers/scsi/libsas/sas_scsi_host.c

1016

pr_err("executing TMF task failed %016llx (%d)\n",

drivers/scsi/libsas/sas_scsi_host.c

1030

pr_err("TMF task timeout for %016llx and not done\n",

drivers/scsi/libsas/sas_scsi_host.c

638

pr_err("error from device %016llx, LUN 0x%llx couldn't be recovered in any way\n",

drivers/scsi/libsas/sas_scsi_host.c

917

pr_err("Executing internal abort failed %016llx (%d)\n",

drivers/scsi/libsas/sas_scsi_host.c

932

pr_err("Internal abort: timeout %016llx\n",

drivers/scsi/libsas/sas_scsi_host.c

951

pr_err("Internal abort: task to dev %016llx response: 0x%x status 0x%x\n",

drivers/scsi/lpfc/lpfc_debugfs.c

5904

pr_err("\nRead mbox command (x%x), "

drivers/scsi/lpfc/lpfc_debugfs.c

5912

pr_err("\nRead mbox buffer (x%x), "

drivers/scsi/lpfc/lpfc_debugfs.c

5920

pr_err("\nWrite mbox command (x%x), "

drivers/scsi/lpfc/lpfc_debugfs.c

5928

pr_err("\nWrite mbox buffer (x%x), "

drivers/scsi/lpfc/lpfc_debugfs.c

5940

pr_err("%s\n", line_buf);

drivers/scsi/lpfc/lpfc_debugfs.c

5951

pr_err("%s\n", line_buf);

drivers/scsi/lpfc/lpfc_debugfs.c

6000

pr_err("Mailbox command:0x%x dump by word:\n",

drivers/scsi/lpfc/lpfc_debugfs.c

6006

pr_err("%s\n", line_buf);

drivers/scsi/lpfc/lpfc_debugfs.c

6019

pr_err("%s\n", line_buf);

drivers/scsi/lpfc/lpfc_debugfs.c

6020

pr_err("\n");

drivers/scsi/lpfc/lpfc_debugfs.c

6023

pr_err("Mailbox command:0x%x dump by byte:\n",

drivers/scsi/lpfc/lpfc_debugfs.c

6029

pr_err("%s\n", line_buf);

drivers/scsi/lpfc/lpfc_debugfs.c

6047

pr_err("%s\n", line_buf);

drivers/scsi/lpfc/lpfc_debugfs.c

6048

pr_err("\n");

drivers/scsi/lpfc/lpfc_debugfs.h

455

pr_err("%s WQ: WQ[Idx:%d|Qid:%d]\n",

drivers/scsi/lpfc/lpfc_debugfs.h

458

pr_err("%s WQ: WQ[Qid:%d]\n",

drivers/scsi/lpfc/lpfc_debugfs.h

508

pr_err("Couldn't find EQ for CQ. Using EQ[0]\n");

drivers/scsi/lpfc/lpfc_debugfs.h

514

pr_err("%s CQ: WQ[Idx:%d|Qid%d]->CQ[Idx%d|Qid%d]"

drivers/scsi/lpfc/lpfc_debugfs.h

519

pr_err("%s CQ: WQ[Qid:%d]->CQ[Qid:%d]"

drivers/scsi/lpfc/lpfc_debugfs.h

542

pr_err("EQ[Idx:%d|Qid:%d]\n", qidx, qp->queue_id);

drivers/scsi/lpfc/lpfc_debugfs.h

592

pr_err("IO WQ[Idx:%d|Qid:%d]\n", wq_idx, qid);

drivers/scsi/lpfc/lpfc_debugfs.h

598

pr_err("ELS WQ[Qid:%d]\n", qid);

drivers/scsi/lpfc/lpfc_debugfs.h

604

pr_err("NVME LS WQ[Qid:%d]\n", qid);

drivers/scsi/lpfc/lpfc_debugfs.h

666

pr_err("IO CQ[Idx:%d|Qid:%d]\n", cq_idx, qid);

drivers/scsi/lpfc/lpfc_debugfs.h

672

pr_err("ELS CQ[Qid:%d]\n", qid);

drivers/scsi/lpfc/lpfc_debugfs.h

678

pr_err("NVME LS CQ[Qid:%d]\n", qid);

drivers/scsi/lpfc/lpfc_debugfs.h

684

pr_err("MBX CQ[Qid:%d]\n", qid);

drivers/scsi/lpfc/lpfc_hbadisc.c

111

pr_err("**** %s: NULL dd_data on rport x%px SID x%x\n",

drivers/scsi/lpfc/lpfc_hbadisc.c

124

pr_err("**** %s: Null vport on ndlp x%px, DID x%x rport x%px "

drivers/scsi/lpfc/lpfc_hbadisc.c

99

pr_err("**** %s: NULL rport, exit.\n", __func__);

drivers/scsi/lpfc/lpfc_nvme.c

198

pr_err("**** %s: NULL ndlp on rport x%px remoteport x%px\n",

drivers/scsi/lpfc/lpfc_nvme.c

205

pr_err("**** %s: Null vport on ndlp x%px, ste x%x rport x%px\n",

drivers/scsi/mac_scsi.c

75

pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>[,<toshiba_delay>]]]]]]\n");

drivers/scsi/megaraid/megaraid_sas_base.c

3438

pr_err("megasas: could not set enable_sdev_max_qd\n");

drivers/scsi/mpi3mr/mpi3mr_app.c

1730

pr_err("%s: unsupported driver command opcode %d\n",

drivers/scsi/mpi3mr/mpi3mr_app.c

2977

pr_err("%s: unsupported BSG command(0x%08x)\n",

drivers/scsi/mpi3mr/mpi3mr_debug.h

42

pr_err("%s: " fmt, (ioc)->name, ##__VA_ARGS__)

drivers/scsi/mpi3mr/mpi3mr_fw.c

5654

pr_err(IOCNAME "reinit after soft reset failed: reason %d\n",

drivers/scsi/mpi3mr/mpi3mr_os.c

2479

pr_err(IOCNAME "Issue DevRmHsTMIOUCTL: Admin post failed\n",

drivers/scsi/mpi3mr/mpi3mr_os.c

6101

pr_err("%s failed to load due to sas transport attach failure\n",

drivers/scsi/mpi3mr/mpi3mr_os.c

6108

pr_err("%s failed to load due to pci register driver failure\n",

drivers/scsi/mpt3sas/mpt3sas_base.c

1684

pr_err("mpt3sas: DIVISOR is zero, in div fn\n");

drivers/scsi/mpt3sas/mpt3sas_base.c

3194

pr_err("%s: unable to allocate interrupt %d!\n",

drivers/scsi/mpt3sas/mpt3sas_base.c

5428

pr_err("%s: failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_base.c

5446

pr_err("%s: failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_base.c

5454

dinitprintk(ioc, pr_err(

drivers/scsi/mpt3sas/mpt3sas_base.c

5646

pr_err("%s: overriding NVDATA EEDPTagMode setting from 0 to 1\n",

drivers/scsi/mpt3sas/mpt3sas_base.c

6086

dinitprintk(ioc, pr_err(

drivers/scsi/mpt3sas/mpt3sas_base.c

6119

dinitprintk(ioc, pr_err(

drivers/scsi/mpt3sas/mpt3sas_base.c

6155

pr_err("Bad Reply Free Pool! Reply Free (0x%p) Reply Free dma = (0x%llx)\n",

drivers/scsi/mpt3sas/mpt3sas_base.c

6194

dinitprintk(ioc, pr_err(

drivers/scsi/mpt3sas/mpt3sas_base.c

6702

pr_err("Setting 32 bit coherent DMA mask Failed %s\n",

drivers/scsi/mpt3sas/mpt3sas_base.h

1748

do { pr_err("%s fault info from func: %s\n", ioc->name, __func__); \

drivers/scsi/mpt3sas/mpt3sas_base.h

1753

do { pr_err("%s fault info from func: %s\n", ioc->name, __func__); \

drivers/scsi/mpt3sas/mpt3sas_base.h

184

pr_err("%s: " fmt, (ioc)->name, ##__VA_ARGS__)

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1122

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1134

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1156

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1268

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1286

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1299

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1317

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1337

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1357

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1378

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1400

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1539

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1554

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

1994

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

2027

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

2110

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

2307

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

2397

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

2571

pr_err("%s: failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

2683

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

2727

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

2777

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

4468

pr_err("%s can't register misc device [minor=%d]\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

4476

pr_err("%s can't register misc device [minor=%d]\n",

drivers/scsi/mpt3sas/mpt3sas_ctl.c

646

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_ctl.c

750

pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__,

drivers/scsi/mpt3sas/mpt3sas_ctl.c

798

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_ctl.c

806

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_ctl.c

818

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_ctl.c

972

pr_err("failure at %s:%d/%s()!\n",

drivers/scsi/mpt3sas/mpt3sas_scsih.c

7459

pr_err("%s: scsih_cmd in use\n", __func__);

drivers/scsi/mpt3sas/mpt3sas_scsih.c

7898

pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__);

drivers/scsi/mpt3sas/mpt3sas_scsih.c

7959

pr_err("SATA Initialization Failed\n");

drivers/scsi/mpt3sas/mpt3sas_scsih.c

7969

pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__);

drivers/scsi/mpt3sas/mpt3sas_transport.c

1314

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_transport.c

1605

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/mpt3sas/mpt3sas_transport.c

407

pr_err("failure at %s:%d/%s()!\n", __FILE__,

drivers/scsi/pm8001/pm8001_sas.c

1056

pr_err("pm80xx: rc= %d\n", rc);

drivers/scsi/qedf/qedf_dbg.c

164

pr_err("Unable to create sysfs %s attr, err(%d).\n",

drivers/scsi/qedf/qedf_dbg.c

22

pr_err("[%s]:[%s:%d]:%d: %pV", dev_name(&(qedf->pdev->dev)),

drivers/scsi/qedf/qedf_dbg.c

25

pr_err("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);

drivers/scsi/qedi/qedi_dbg.c

23

pr_err("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),

drivers/scsi/qedi/qedi_dbg.c

26

pr_err("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);

drivers/scsi/qla2xxx/qla_dbg.c

2596

pr_err("%s%pV", pbuf, &vaf);

drivers/scsi/qla2xxx/qla_dbg.c

2650

pr_err("%s%pV", pbuf, &vaf);

drivers/scsi/qla2xxx/qla_dfs.c

658

pr_err("host%ld: this adapter does not support Multi Q.",

drivers/scsi/qla2xxx/qla_dfs.c

664

pr_err("host%ld: Driver is not setup with Multi Q.",

drivers/scsi/qla2xxx/qla_dfs.c

670

pr_err("host%ld: fail to copy user buffer.",

drivers/scsi/qla2xxx/qla_dfs.c

678

pr_err("User set invalid number of qpairs %lu. Max = %d",

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1014

pr_err("In non NPIV mode, a single TPG=1 is used for HW port mappings\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1020

pr_err("Unable to allocate struct tcm_qla2xxx_tpg\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1111

pr_err("Unable to allocate struct tcm_qla2xxx_tpg\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1148

pr_err("Unable to locate struct tcm_qla2xxx_lport\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1166

pr_err("Unable to locate struct fc_port\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1253

pr_err("Unable to locate struct tcm_qla2xxx_lport\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1271

pr_err("Unable to locate struct fc_port\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1366

pr_err("struct fc_port->se_sess is NULL\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1373

pr_err("Unable to locate struct tcm_qla2xxx_lport\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1429

pr_err("Unable to locate struct tcm_qla2xxx_lport\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1438

pr_err("Unable to locate struct tcm_qla2xxx_lport->tpg_1\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1567

pr_err("Unable to initialize lport->lport_fcport_map btree\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1575

pr_err("Unable to allocate lport->lport_loopid_map of %zu bytes\n", map_sz);

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1614

pr_err("Unable to allocate struct tcm_qla2xxx_lport\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1679

pr_err("qla2xxx base_vha not enabled for target mode\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1685

pr_err("qla2xxx base_lport or tpg_1 not available\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1698

pr_err("fc_vport_create failed for qla2xxx_npiv\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1726

pr_err("Unable to locate NPIV '@' separator\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

1740

pr_err("Unable to allocate struct tcm_qla2xxx_lport for NPIV\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

468

pr_err("Unable to locate struct fc_port from qla_tgt_cmd\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

474

pr_err("Unable to locate active struct se_session\n");

drivers/scsi/qla2xxx/tcm_qla2xxx.c

885

pr_err("kstrtoul() failed with" \

drivers/scsi/qla2xxx/tcm_qla2xxx.c

891

pr_err("Illegal boolean value %lu\n", val); \

drivers/scsi/qla2xxx/tcm_qla2xxx.c

968

pr_err("kstrtoul() returned %d for fabric_prot_type\n", ret);

drivers/scsi/qla2xxx/tcm_qla2xxx.c

972

pr_err("Invalid qla2xxx fabric_prot_type: %lu\n", val);

drivers/scsi/qla4xxx/ql4_os.c

1721

pr_err("%s: shost is NULL\n", __func__);

drivers/scsi/scsi_debug.c

4352

pr_err("GUARD check failed on sector %lu rcvd 0x%04x, data 0x%04x\n",

drivers/scsi/scsi_debug.c

4360

pr_err("REF check failed on sector %lu\n",

drivers/scsi/scsi_debug.c

4366

pr_err("REF check failed on sector %lu\n",

drivers/scsi/scsi_debug.c

5744

pr_err("alloc len too small %d\n", alloc_len);

drivers/scsi/scsi_debug.c

6455

pr_err("Device capacity too small\n");

drivers/scsi/scsi_debug.c

6460

pr_err("Zone size is not a power of 2\n");

drivers/scsi/scsi_debug.c

6466

pr_err("Zone size too large for device capacity\n");

drivers/scsi/scsi_debug.c

6480

pr_err("Zone capacity too large\n");

drivers/scsi/scsi_debug.c

6487

pr_err("Number of conventional zones too large\n");

drivers/scsi/scsi_debug.c

6608

pr_err("out of memory at line %d\n", __LINE__);

drivers/scsi/scsi_debug.c

8503

pr_err("invalid sector_size %d\n", sdebug_sector_size);

drivers/scsi/scsi_debug.c

8517

pr_err("dif must be 0, 1, 2 or 3\n");

drivers/scsi/scsi_debug.c

8522

pr_err("num_tgts must be >= 0\n");

drivers/scsi/scsi_debug.c

8527

pr_err("guard must be 0 or 1\n");

drivers/scsi/scsi_debug.c

8532

pr_err("ato must be 0 or 1\n");

drivers/scsi/scsi_debug.c

8537

pr_err("invalid physblk_exp %u\n", sdebug_physblk_exp);

drivers/scsi/scsi_debug.c

8556

pr_err("lowest_aligned too big: %u\n", sdebug_lowest_aligned);

drivers/scsi/scsi_debug.c

8561

pr_err("submit_queues must be 1 or more\n");

drivers/scsi/scsi_debug.c

8566

pr_err("max_queue must be in range [1, %d]\n", SDEBUG_CANQUEUE);

drivers/scsi/scsi_debug.c

8572

pr_err("host_max_queue must be in range [0 %d]\n",

drivers/scsi/scsi_debug.c

8604

pr_err("Invalid ZBC model\n");

drivers/scsi/scsi_debug.c

8651

pr_err("ERR: unmap_granularity <= unmap_alignment\n");

drivers/scsi/scsi_debug.c

8691

pr_err("add_host_helper k=%d, error=%d\n",

drivers/scsi/scsi_debug.c

8699

pr_err("add_host k=%d error=%d\n", k, -ret);

drivers/scsi/scsi_debug.c

8812

pr_err("user data oom\n");

drivers/scsi/scsi_debug.c

8829

pr_err("DIX oom\n");

drivers/scsi/scsi_debug.c

8843

pr_err("LBP map oom\n");

drivers/scsi/scsi_debug.c

9270

pr_err("command with tag %#x not found\n", unique_tag);

drivers/scsi/scsi_debug.c

9280

pr_err("failed to abort command with tag %#x\n", unique_tag);

drivers/scsi/scsi_debug.c

9563

pr_err("scsi_host_alloc failed\n");

drivers/scsi/scsi_debug.c

9667

pr_err("scsi_add_host failed\n");

drivers/scsi/scsi_devinfo.c

380

pr_err("scsi_devinfo (%s:%s): unsupported flags 0x%llx",

drivers/scsi/scsi_devinfo.c

523

pr_err("%s: bad dev info string '%s' '%s' '%s'\n",

drivers/scsi/scsi_transport_iscsi.c

1440

pr_err("Could not delete all connections for %s. Error %d.\n",

drivers/scsi/scsi_transport_iscsi.c

3378

pr_err("%s could not find host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3451

pr_err("%s could not find host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3460

pr_err("%s could not find flashnode %u for host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3501

pr_err("%s could not find host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3535

pr_err("%s could not find host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3544

pr_err("%s could not find flashnode %u for host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3577

pr_err("%s could not find host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3586

pr_err("%s could not find flashnode %u for host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3629

pr_err("%s could not find host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3638

pr_err("%s could not find flashnode %u for host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3679

pr_err("%s could not find host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3687

pr_err("%s could not find session id %u\n",

drivers/scsi/scsi_transport_iscsi.c

3727

pr_err("%s: failed. Could not find host no %u\n",

drivers/scsi/scsi_transport_iscsi.c

3737

pr_err("cannot deliver host stats: OOM\n");

drivers/scsi/sg.c

1533

pr_err("%s: device_create failed\n", __func__);

drivers/scsi/sg.c

1540

pr_err("%s: unable to make symlink 'generic' back "

drivers/scsi/snic/snic.h

159

pr_err(PFX fmt, ## args)

drivers/scsi/snic/vnic_cq.c

25

pr_err("Failed to hook CQ[%d] resource\n", index);

drivers/scsi/snic/vnic_dev.c

123

pr_err("vNIC BAR0 resource %d out-of-bounds, offset 0x%x + size 0x%x > bar len 0x%lx\n",

drivers/scsi/snic/vnic_dev.c

216

pr_err("Failed to allocate ring (size=%d), aborting\n",

drivers/scsi/snic/vnic_dev.c

273

pr_err("%s: wq is full while issuing devcmd2 command %d, fetch index: %u, posted index: %u\n",

drivers/scsi/snic/vnic_dev.c

320

pr_err("Error %d devcmd %d\n",

drivers/scsi/snic/vnic_dev.c

334

pr_err("Timed out devcmd %d\n", _CMD_N(cmd));

drivers/scsi/snic/vnic_dev.c

737

pr_err("DEVCMD2 resource not found.\n");

drivers/scsi/snic/vnic_dev.c

77

pr_err("vNIC BAR0 res hdr length error\n");

drivers/scsi/snic/vnic_dev.c

84

pr_err("vNIC BAR0 res hdr not mem-mapped\n");

drivers/scsi/snic/vnic_dev.c

91

pr_err("vNIC BAR0 res magic/version error exp (%lx/%lx) curr (%x/%x)\n",

drivers/scsi/snic/vnic_intr.c

25

pr_err("Failed to hook INTR[%d].ctrl resource\n",

drivers/scsi/snic/vnic_wq.c

119

pr_err("Failed to hook WQ[%d] resource\n", index);

drivers/scsi/snic/vnic_wq.c

194

pr_err("Failed to disable WQ[%d]\n", wq->index);

drivers/scsi/snic/vnic_wq.c

38

pr_err("Failed to alloc wq_bufs\n");

drivers/scsi/snic/vnic_wq.c

95

pr_err("Failed to get devcmd2 resource\n");

drivers/scsi/st.c

4275

pr_err("st%d: out of memory. Device not attached.\n", dev_num);

drivers/scsi/st.c

4285

pr_err("st%d: Can't add %s-rewind mode %d\n", dev_num,

drivers/scsi/st.c

4287

pr_err("st%d: Device not attached.\n", dev_num);

drivers/scsi/st.c

4298

pr_err("st%d: device_create failed\n", dev_num);

drivers/scsi/st.c

4567

pr_err("Unable register sysfs class for SCSI tapes\n");

drivers/scsi/sun3_scsi.c

574

pr_err(PFX "couldn't allocate DVMA memory!\n");

drivers/scsi/sun3_scsi.c

600

pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",

drivers/scsi/virtio_scsi.c

1071

pr_err("kmem_cache_create() for virtscsi_cmd_cache failed\n");

drivers/scsi/virtio_scsi.c

1080

pr_err("mempool_create() for virtscsi_cmd_pool failed\n");

drivers/scsi/virtio_scsi.c

309

pr_err("SCSI device %d 0 %d %d not found\n",

drivers/scsi/virtio_scsi.c

330

pr_err("SCSI device %d 0 %d %d not found\n",

drivers/scsi/virtio_scsi.c

414

pr_err("Unsupported virtio scsi event %x\n", event->event);

drivers/scsi/zorro_esp.c

731

pr_err("Can't allocate device private data!\n");

drivers/scsi/zorro_esp.c

771

pr_err("cannot reserve region 0x%lx, abort\n",

drivers/scsi/zorro_esp.c

780

pr_err("No host detected; board configuration problem?\n");

drivers/scsi/zorro_esp.c

806

pr_err("Cannot allocate board address space\n");

drivers/sh/clk/cpg.c

208

pr_err("sh_clk_init_parent: cannot select parent clock\n");

drivers/sh/clk/cpg.c

216

pr_err("sh_clk_init_parent: parent table size failed\n");

drivers/sh/clk/cpg.c

222

pr_err("sh_clk_init_parent: unable to set parent");

drivers/sh/clk/cpg.c

242

pr_err("%s: unable to alloc memory\n", __func__);

drivers/sh/clk/cpg.c

464

pr_err("%s: unable to alloc memory\n", __func__);

drivers/sh/clk/cpg.c

63

pr_err("cpg: failed to enable %p[%d]\n",

drivers/sh/intc/core.c

185

pr_err("uname to allocate IRQ %d\n", irq);

drivers/sh/intc/core.c

190

pr_err("domain association failure\n");

drivers/sh/intc/core.c

389

pr_err("unable to allocate INTC memory\n");

drivers/sh/intc/core.c

498

pr_err("device registration error\n");

drivers/sh/intc/virq.c

227

pr_err("no more free IRQs, bailing..\n");

drivers/siox/siox-core.c

939

pr_err("Driver %s doesn't provide needed callbacks\n",

drivers/siox/siox-core.c

949

pr_err("Failed to register siox driver %s (%d)\n",

drivers/siox/siox-core.c

962

pr_err("Registration of SIOX bus type failed: %d\n", ret);

drivers/slimbus/qcom-ngd-ctrl.c

394

pr_err("QMI power request failed 0x%x\n",

drivers/slimbus/sched.c

53

pr_err("Previous clock pause did not finish");

drivers/soc/amlogic/meson-gx-socinfo.c

178

pr_err("%s: failed to get regmap\n", __func__);

drivers/soc/amlogic/meson-gx-socinfo.c

187

pr_err("%s: invalid chipid value\n", __func__);

drivers/soc/bcm/brcmstb/biuctrl.c

261

pr_err("failed to remap BIU control base\n");

drivers/soc/bcm/brcmstb/biuctrl.c

270

pr_err("failed to obtain CPU device node\n");

drivers/soc/bcm/brcmstb/biuctrl.c

282

pr_err("unsupported CPU\n");

drivers/soc/bcm/brcmstb/biuctrl.c

354

pr_err("MCP: Unable to disable write pairing!\n");

drivers/soc/bcm/brcmstb/pm/pm-mips.c

389

pr_err("error mapping AON_CTRL\n");

drivers/soc/bcm/brcmstb/pm/pm-mips.c

397

pr_err("error mapping AON_SRAM\n");

drivers/soc/bcm/brcmstb/pm/pm-mips.c

424

pr_err("error mapping MEMC ARB\n");

drivers/soc/bcm/brcmstb/pm/pm-mips.c

432

pr_err("error mapping timers\n");

drivers/soc/dove/pmu.c

112

pr_err("pmu: %s failed: %d\n", "reset_controller_register", ret);

drivers/soc/dove/pmu.c

279

pr_err("%s: unable to add irq domain\n", name);

drivers/soc/dove/pmu.c

288

pr_err("%s: unable to alloc irq domain gc: %d\n", name, ret);

drivers/soc/dove/pmu.c

341

pr_err("dove_init_pmu_irq() failed: %d\n", ret);

drivers/soc/dove/pmu.c

385

pr_err("%pOFn: failed to find domains sub-node\n", np_pmu);

drivers/soc/dove/pmu.c

398

pr_err("%pOFn: failed to map PMU\n", np_pmu);

drivers/soc/dove/pmu.c

446

pr_err("%pOFn: no interrupt specified\n", np_pmu);

drivers/soc/dove/pmu.c

450

pr_err("dove_init_pmu_irq() failed: %d\n", ret);

drivers/soc/fsl/dpaa2-console.c

126

pr_err("cannot map console log memory\n");

drivers/soc/fsl/dpaa2-console.c

276

pr_err("of_address_to_resource() failed for %pOF with %d\n",

drivers/soc/fsl/dpaa2-console.c

283

pr_err("cannot register device %s\n",

drivers/soc/fsl/dpaa2-console.c

290

pr_err("cannot register device %s\n",

drivers/soc/fsl/dpaa2-console.c

77

pr_err("could not map MC Firmware Base registers\n");

drivers/soc/fsl/dpio/qbman-portal.c

1574

pr_err("qbman: acquire from BPID %d failed, no response\n",

drivers/soc/fsl/dpio/qbman-portal.c

1584

pr_err("qbman: acquire from BPID 0x%x failed, code=0x%02x\n",

drivers/soc/fsl/dpio/qbman-portal.c

1629

pr_err("qbman: mgmt cmd failed, no response (verb=0x%x)\n",

drivers/soc/fsl/dpio/qbman-portal.c

1639

pr_err("qbman: ALT FQID %d failed: verb = 0x%08x code = 0x%02x\n",

drivers/soc/fsl/dpio/qbman-portal.c

1690

pr_err("qbman: wqchan config failed, no response\n");

drivers/soc/fsl/dpio/qbman-portal.c

1698

pr_err("qbman: CDAN cQID %d failed: code = 0x%02x\n",

drivers/soc/fsl/dpio/qbman-portal.c

1731

pr_err("qbman: Query FQID %d NP fields failed, no response\n",

drivers/soc/fsl/dpio/qbman-portal.c

1741

pr_err("Query NP fields of FQID 0x%x failed, code=0x%02x\n",

drivers/soc/fsl/dpio/qbman-portal.c

1779

pr_err("qbman: Query BPID %d fields failed, no response\n",

drivers/soc/fsl/dpio/qbman-portal.c

1789

pr_err("Query fields of BPID 0x%x failed, code=0x%02x\n",

drivers/soc/fsl/dpio/qbman-portal.c

1821

pr_err("irq_holdoff must be <= %uus\n", max_holdoff);

drivers/soc/fsl/dpio/qbman-portal.c

1826

pr_err("irq_threshold must be < %u\n", p->dqrr.dqrr_size - 1);

drivers/soc/fsl/dpio/qbman-portal.c

320

pr_err("qbman: the portal is not enabled!\n");

drivers/soc/fsl/qbman/bman_ccsr.c

121

pr_err("Attempted to reinitialize BMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n",

drivers/soc/fsl/qbman/bman_portal.c

236

pr_err("bman: failed to register hotplug callbacks.\n");

drivers/soc/fsl/qbman/qman.c

1215

pr_err("Found verb 0x%x in MR\n", msg->verb);

drivers/soc/fsl/qbman/qman.c

2440

pr_err("Warning: %d error%s while initialising CGR h/w\n",

drivers/soc/fsl/qbman/qman.c

3048

pr_err("CRGID 0x%x is being used by FQID 0x%x, CGR will be leaked\n",

drivers/soc/fsl/qbman/qman_ccsr.c

363

pr_err("Attempted to reinitialize QMan with different BAR, got 0x%llx read BARE=0x%x BAR=0x%x\n",

drivers/soc/fsl/qbman/qman_portal.c

335

pr_err("qman: failed to register hotplug callbacks.\n");

drivers/soc/fsl/qbman/qman_test_api.c

169

pr_err("qman_volatile_dequeue() failed\n");

drivers/soc/fsl/qbman/qman_test_api.c

216

pr_err("BADNESS: dequeued frame doesn't match;\n");

drivers/soc/fsl/qe/qe.c

333

pr_err("QE: unsupported value of fsl,qe-num-snums: %u\n", qe_num_of_snum);

drivers/soc/fsl/qe/qe_common.c

62

pr_err("Cannot find CPM muram data node");

drivers/soc/fsl/qe/qe_common.c

70

pr_err("Cannot allocate memory pool for CPM/QE muram");

drivers/soc/fsl/qe/qe_common.c

76

pr_err("Cannot translate zero through CPM muram node");

drivers/soc/fsl/qe/qe_common.c

87

pr_err("QE: couldn't add muram to pool!\n");

drivers/soc/fsl/qe/qe_common.c

94

pr_err("Cannot map QE muram");

drivers/soc/fsl/qe/qe_ic.c

304

pr_err("%s: Invalid hw irq number for QEIC\n", __func__);

drivers/soc/fsl/qe/qe_tdm.c

100

pr_err("QE-TDM: No tdm-framer-type property for UCC\n");

drivers/soc/fsl/qe/qe_tdm.c

111

pr_err("QE-TDM: No siram entry id for UCC\n");

drivers/soc/fsl/qe/qe_tdm.c

213

pr_err("QE-TDM: can not find tdm sixmr reg\n");

drivers/soc/fsl/qe/qe_tdm.c

47

pr_err("QE-TDM: Invalid rx-sync-clock property\n");

drivers/soc/fsl/qe/qe_tdm.c

51

pr_err("QE-TDM: Invalid rx-sync-clock property\n");

drivers/soc/fsl/qe/qe_tdm.c

60

pr_err("QE-TDM: Invalid tx-sync-clock property\n");

drivers/soc/fsl/qe/qe_tdm.c

64

pr_err("QE-TDM: Invalid tx-sync-clock property\n");

drivers/soc/fsl/qe/qe_tdm.c

70

pr_err("QE-TDM: Invalid tx-timeslot-mask property\n");

drivers/soc/fsl/qe/qe_tdm.c

78

pr_err("QE-TDM: Invalid rx-timeslot-mask property\n");

drivers/soc/fsl/qe/qe_tdm.c

86

pr_err("QE-TDM: No fsl,tdm-id property for this UCC\n");

drivers/soc/fsl/qe/ucc_fast.c

334

pr_err("%s: illegal value for RX clock", __func__);

drivers/soc/fsl/qe/ucc_fast.c

343

pr_err("%s: illegal value for TX clock", __func__);

drivers/soc/fsl/qe/ucc_fast.c

352

pr_err("%s: illegal value for RX clock", __func__);

drivers/soc/fsl/qe/ucc_fast.c

361

pr_err("%s: illegal value for TX clock", __func__);

drivers/soc/fsl/qe/usb.c

37

pr_err("%s: requested unknown clock %d\n", __func__, clk);

drivers/soc/imx/soc-imx.c

149

pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);

drivers/soc/imx/soc-imx8m.c

334

pr_err("Failed to register imx8m-soc platform driver: %d\n", ret);

drivers/soc/imx/soc-imx8m.c

340

pr_err("Failed to register imx8m-soc platform device: %ld\n", PTR_ERR(pdev));

drivers/soc/imx/soc-imx9.c

103

pr_err("failed to register imx9_soc platform device: %ld\n", PTR_ERR(pdev));

drivers/soc/imx/soc-imx9.c

97

pr_err("failed to register imx9_soc platform driver: %d\n", ret);

drivers/soc/mediatek/mtk-mutex.c

1028

pr_err("could not acquire mutex %d\n", mutex->id);

drivers/soc/qcom/pdr_interface.c

143

pr_err("PDR: %s register listener txn wait failed: %d\n",

drivers/soc/qcom/pdr_interface.c

149

pr_err("PDR: %s register listener failed: 0x%x\n",

drivers/soc/qcom/pdr_interface.c

378

pr_err("PDR: %s get domain list txn wait failed: %d\n",

drivers/soc/qcom/pdr_interface.c

384

pr_err("PDR: %s get domain list failed: 0x%x\n",

drivers/soc/qcom/pdr_interface.c

445

pr_err("PDR: service lookup for %s failed: %d\n",

drivers/soc/qcom/pdr_interface.c

605

pr_err("PDR: %s PD restart txn wait failed: %d\n",

drivers/soc/qcom/pdr_interface.c

613

pr_err("PDR: %s PD restart is disabled: 0x%x\n",

drivers/soc/qcom/pdr_interface.c

620

pr_err("PDR: %s request for PD restart failed: 0x%x\n",

drivers/soc/qcom/pmic_glink_altmode.c

280

pr_err("Got illegal USB4 cable speed value (%u), falling back to G2\n",

drivers/soc/qcom/qcom_pd_mapper.c

208

pr_err("Error sending servreg response: %d\n", ret);

drivers/soc/qcom/qcom_pd_mapper.c

233

pr_err("Error sending servreg response: %d\n", ret);

drivers/soc/qcom/qcom_pd_mapper.c

662

pr_err("PDM: error adding server %d\n", ret);

drivers/soc/qcom/qmi_encdec.c

229

pr_err("%s: Unrecognized element size\n", __func__);

drivers/soc/qcom/qmi_encdec.c

269

pr_err("%s: STRUCT Encode failure\n", __func__);

drivers/soc/qcom/qmi_encdec.c

310

pr_err("%s: String to be encoded is longer - %d > %d\n",

drivers/soc/qcom/qmi_encdec.c

318

pr_err("%s: Output len %d > Out Buf len %d\n",

drivers/soc/qcom/qmi_encdec.c

324

pr_err("%s: Output len %d > Out Buf len %d\n",

drivers/soc/qcom/qmi_encdec.c

392

pr_err("%s: Invalid data length\n", __func__);

drivers/soc/qcom/qmi_encdec.c

415

pr_err("%s: Too Small Buffer @DATA_LEN\n",

drivers/soc/qcom/qmi_encdec.c

451

pr_err("%s: Too Small Buffer @data_type:%d\n",

drivers/soc/qcom/qmi_encdec.c

488

pr_err("%s: Unrecognized data type\n", __func__);

drivers/soc/qcom/qmi_encdec.c

541

pr_err("%s: Unrecognized element size\n", __func__);

drivers/soc/qcom/qmi_encdec.c

590

pr_err("%s: Fault in decoding: dl(%d), db(%d), tl(%d), i(%d), el(%d)\n",

drivers/soc/qcom/qmi_encdec.c

650

pr_err("%s: String len %d >= Max Len %d\n",

drivers/soc/qcom/qmi_encdec.c

654

pr_err("%s: String len %d > Input Buffer Len %d\n",

drivers/soc/qcom/qmi_encdec.c

736

pr_err("%s: Inval element info\n", __func__);

drivers/soc/qcom/qmi_encdec.c

786

pr_err("%s: Data len %d > max spec %d\n",

drivers/soc/qcom/qmi_encdec.c

824

pr_err("%s: Unrecognized data type\n", __func__);

drivers/soc/qcom/qmi_encdec.c

857

pr_err("%s: Calc. len %d != 0, but NULL c_struct\n",

drivers/soc/qcom/qmi_interface.c

189

pr_err("failed to send lookup registration: %d\n", ret);

drivers/soc/qcom/qmi_interface.c

254

pr_err("send service registration failed: %d\n", ret);

drivers/soc/qcom/qmi_interface.c

324

pr_err("failed to allocate transaction id\n");

drivers/soc/qcom/qmi_interface.c

416

pr_err("failed to decode incoming message\n");

drivers/soc/qcom/qmi_interface.c

482

pr_err("ignoring short QMI packet\n");

drivers/soc/qcom/qmi_interface.c

505

pr_err("failed to decode incoming message\n");

drivers/soc/qcom/qmi_interface.c

554

pr_err("qmi recvmsg failed: %zd\n", msglen);

drivers/soc/qcom/qmi_interface.c

664

pr_err("failed to create QMI socket\n");

drivers/soc/qcom/qmi_interface.c

769

pr_err("failed to send QMI message\n");

drivers/soc/qcom/rmtfs_mem.c

336

pr_err("qcom_rmtfs_mem: failed to allocate char dev region\n");

drivers/soc/qcom/rmtfs_mem.c

342

pr_err("qcom_rmtfs_mem: failed to register rmtfs_mem driver\n");

drivers/soc/qcom/rpmh-rsc.c

246

pr_err("%s: error writing %#x to %d:%#x\n", drv->name,

drivers/soc/qcom/rpmh.c

371

pr_err("Error(%d) sending RPMH message addr=%#x\n",

drivers/soc/qcom/ubwc_config.c

308

pr_err("Couldn't find UBWC config data for this platform!\n");

drivers/soc/renesas/r9a06g032-smp.c

59

pr_err("CPU#1: missing device tree node\n");

drivers/soc/renesas/r9a06g032-smp.c

82

pr_err("CPU#1: invalid cpu-release-addr property\n");

drivers/soc/renesas/rcar-rst.c

47

pr_err("Invalid boot address got %llx\n", boot_addr);

drivers/soc/rockchip/grf.c

224

pr_err("%s: missing grf data\n", __func__);

drivers/soc/rockchip/grf.c

233

pr_err("%s: could not get grf syscon\n", __func__);

drivers/soc/rockchip/grf.c

245

pr_err("%s: write to %#6x failed with %d\n",

drivers/soc/tegra/cbb/tegra234-cbb.c

539

pr_err("Error Notifier received a spurious notification\n");

drivers/soc/tegra/cbb/tegra234-cbb.c

544

pr_err("CBB registers returning all 1's which is invalid\n");

drivers/soc/tegra/flowctrl.c

199

pr_err("failed to get flowctrl register\n");

drivers/soc/tegra/fuse/fuse-tegra.c

539

pr_err("failed to get FUSE register\n");

drivers/soc/tegra/fuse/fuse-tegra.c

554

pr_err("failed to map clock registers\n");

drivers/soc/tegra/fuse/fuse-tegra.c

561

pr_err("failed to map FUSE registers\n");

drivers/soc/tegra/fuse/fuse-tegra.c

571

pr_err("failed to add FUSE lookups\n");

drivers/soc/tegra/fuse/fuse-tegra.c

592

pr_err("failed to register SoC device: %ld\n", PTR_ERR(soc));

drivers/soc/tegra/fuse/speedo-tegra114.c

58

pr_err("Tegra Unknown SKU %d\n", sku);

drivers/soc/tegra/fuse/speedo-tegra124.c

96

pr_err("Tegra Unknown SKU %d\n", sku);

drivers/soc/tegra/fuse/speedo-tegra210.c

106

pr_err("Tegra210: unknown revision 2 or newer SKU %#04x\n", sku);

drivers/soc/tegra/fuse/speedo-tegra210.c

113

pr_err("Tegra210: unknown SKU %#04x\n", sku);

drivers/soc/tegra/fuse/speedo-tegra30.c

143

pr_err("Tegra Unknown pkg %d\n", package_id);

drivers/soc/tegra/fuse/speedo-tegra30.c

160

pr_err("Tegra Unknown pkg %d\n", package_id);

drivers/soc/tegra/fuse/speedo-tegra30.c

177

pr_err("Tegra Unknown pkg %d\n", package_id);

drivers/soc/tegra/fuse/speedo-tegra30.c

214

pr_err("Tegra Unknown pkg %d\n", package_id);

drivers/soc/tegra/fuse/tegra-apbmisc.c

176

pr_err("failed to map APBMISC registers\n");

drivers/soc/tegra/fuse/tegra-apbmisc.c

183

pr_err("failed to map strapping options registers\n");

drivers/soc/tegra/fuse/tegra-apbmisc.c

241

pr_err("failed to get APBMISC registers\n");

drivers/soc/tegra/fuse/tegra-apbmisc.c

246

pr_err("failed to get strapping options registers\n");

drivers/soc/tegra/fuse/tegra-apbmisc.c

281

pr_err("failed to get APBMISC memory resources");

drivers/soc/tegra/fuse/tegra-apbmisc.c

299

pr_err("failed to get APBMISC registers\n");

drivers/soc/tegra/fuse/tegra-apbmisc.c

304

pr_err("failed to get strapping options registers\n");

drivers/soc/tegra/pmc.c

1391

pr_err("failed to acquire resets: %d\n", err);

drivers/soc/tegra/pmc.c

1452

pr_err("failed to assert resets: %d\n", err);

drivers/soc/tegra/pmc.c

4764

pr_err("failed to get PMC registers\n");

drivers/soc/tegra/pmc.c

4772

pr_err("failed to map PMC registers\n");

drivers/soc/tegra/regulators-tegra20.c

188

pr_err("core-cpu voltage constraint violated: %d %d\n",

drivers/soc/tegra/regulators-tegra20.c

196

pr_err("rtc-cpu voltage constraint violated: %d %d\n",

drivers/soc/tegra/regulators-tegra20.c

200

pr_err("core-rtc voltage constraint violated: %d %d\n",

drivers/soc/tegra/regulators-tegra20.c

355

pr_err("regulators are not coupled properly\n");

drivers/soc/tegra/regulators-tegra20.c

370

pr_err("changing %s voltage not permitted\n", rdev_get_name(rtc_rdev));

drivers/soc/tegra/regulators-tegra20.c

427

pr_err("failed to prepare regulators: %d\n", ret);

drivers/soc/tegra/regulators-tegra30.c

287

pr_err("core voltage constraint violated: %d %d %d\n",

drivers/soc/tegra/regulators-tegra30.c

350

pr_err("regulators are not coupled properly\n");

drivers/soc/tegra/regulators-tegra30.c

412

pr_err("failed to prepare regulators: %d\n", ret);

drivers/soc/ti/knav_dma.c

416

pr_err("keystone-navigator-dma driver not registered\n");

drivers/soc/ti/knav_dma.c

501

pr_err("keystone-navigator-dma driver not registered\n");

drivers/soc/ti/pm33xx.c

500

pr_err("PM: Could not ioremap GIC base\n");

drivers/soc/ti/pm33xx.c

512

pr_err("PM: Cannot get wkup_m3_ipc handle\n");

drivers/soc/ti/smartreflex.c

83

pr_err("%s: Null voltage domain passed!\n", __func__);

drivers/soc/ti/smartreflex.c

986

pr_err("%s: platform driver register failed for SR\n",

drivers/soc/ux500/ux500-soc-id.c

115

pr_err("Unable to identify SoC\n");

drivers/soc/xilinx/xlnx_event_manager.c

176

pr_err("Found as already registered\n");

drivers/soc/xilinx/xlnx_event_manager.c

309

pr_err("%s() Unsupported Callback 0x%x\n", __func__, cb_type);

drivers/soc/xilinx/xlnx_event_manager.c

350

pr_err("%s() failed for 0x%x and 0x%x: %d\r\n", __func__, node_id,

drivers/soc/xilinx/xlnx_event_manager.c

358

pr_err("%s() failed for 0x%x and 0x%x: %d\r\n", __func__, node_id,

drivers/soc/xilinx/xlnx_event_manager.c

403

pr_err("%s() Unsupported Callback 0x%x\n", __func__, cb_type);

drivers/soc/xilinx/xlnx_event_manager.c

431

pr_err("%s() failed for 0x%x and 0x%x: %d\n",

drivers/soc/xilinx/xlnx_event_manager.c

484

pr_err("%s() failed for 0x%x and 0x%x: %d\r\n", __func__,

drivers/soc/xilinx/xlnx_event_manager.c

547

pr_err("%s() Unsupported Callback %d\n", __func__, cb_type);

drivers/soc/xilinx/zynqmp_power.c

117

pr_err("%s Unsupported InitSuspendCb reason code %d\n",

drivers/soc/xilinx/zynqmp_power.c

121

pr_err("%s() Unsupported Callback %d\n", __func__, payload[0]);

drivers/soc/xilinx/zynqmp_power.c

149

pr_err("IPI ack failed. Error %d\n", ret);

drivers/soc/xilinx/zynqmp_power.c

171

pr_err("unable to set shutdown scope\n");

drivers/soc/xilinx/zynqmp_power.c

177

pr_err("%s Unsupported Event - %d\n", __func__, pm_work->args[2]);

drivers/soc/xilinx/zynqmp_power.c

180

pr_err("%s() Unsupported Callback %d\n", __func__, pm_work->args[0]);

drivers/soc/xilinx/zynqmp_power.c

200

pr_err("%s Unsupported InitSuspendCb reason code %d.\n",

drivers/soundwire/bus.c

376

pr_err("SDW: Invalid address %x passed\n", addr);

drivers/soundwire/bus.c

388

pr_err("SDW: Invalid device for paging :%d\n", dev_num);

drivers/soundwire/bus.c

393

pr_err("SDW: No slave for paging addr\n");

drivers/soundwire/bus.c

49

pr_err("SoundWire parent device is not set\n");

drivers/soundwire/bus_type.c

208

pr_err("driver %s didn't provide SDW probe routine\n",

drivers/soundwire/stream.c

1501

pr_err("%s: do_bank_switch failed: %d\n", __func__, ret);

drivers/soundwire/stream.c

1539

pr_err("SoundWire: Handle not found for stream\n");

drivers/soundwire/stream.c

1553

pr_err("%s: %s: inconsistent state state %d\n",

drivers/soundwire/stream.c

1604

pr_err("%s: do_bank_switch failed: %d\n", __func__, ret);

drivers/soundwire/stream.c

1624

pr_err("SoundWire: Handle not found for stream\n");

drivers/soundwire/stream.c

1637

pr_err("%s: %s: inconsistent state state %d\n",

drivers/soundwire/stream.c

1681

pr_err("%s: do_bank_switch failed: %d\n", __func__, ret);

drivers/soundwire/stream.c

1712

pr_err("SoundWire: Handle not found for stream\n");

drivers/soundwire/stream.c

1724

pr_err("%s: %s: inconsistent state state %d\n",

drivers/soundwire/stream.c

1817

pr_err("SoundWire: Handle not found for stream\n");

drivers/soundwire/stream.c

1830

pr_err("%s: %s: inconsistent state state %d\n",

drivers/spi/spi-altera-dfl.c

64

pr_err("%s timed out %d\n", __func__, loops);

drivers/spi/spi-altera-dfl.c

90

pr_err("%s timed out %d\n", __func__, loops);

drivers/spi/spi-cadence.c

332

pr_err("%s: rxbuf address is not aligned for %d bytes\n",

drivers/spi/spi-cadence.c

350

pr_err("%s invalid n_bytes %d\n", __func__,

drivers/spi/spi-cadence.c

363

pr_err("%s: txbuf address is not aligned for %d bytes\n",

drivers/spi/spi-cadence.c

380

pr_err("%s invalid n_bytes %d\n", __func__,

drivers/spi/spi-sprd-adi.c

200

pr_err("ADI read error, addr = 0x%x, val = 0x%x\n", addr, val);

drivers/spi/spi.c

4951

pr_err("%s: failed to create for '%pOF'\n",

drivers/ssb/driver_chipcommon_sflash.c

122

pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",

drivers/ssb/driver_chipcommon_sflash.c

137

pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",

drivers/ssb/driver_chipcommon_sflash.c

144

pr_err("Unsupported flash type\n");

drivers/ssb/main.c

1182

pr_err("Bus powerdown failed\n");

drivers/ssb/main.c

1203

pr_err("Bus powerup failed\n");

drivers/ssb/main.c

1311

pr_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");

drivers/ssb/main.c

1316

pr_err("PCMCIA host initialization failed\n");

drivers/ssb/main.c

1321

pr_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");

drivers/ssb/main.c

524

pr_err("Could not register %s\n", dev_name(dev));

drivers/ssb/main.c

539

pr_err("Error registering parallel flash\n");

drivers/ssb/main.c

547

pr_err("Error registering serial flash\n");

drivers/ssb/pci.c

163

pr_err("Error: ssb_pci_xtal() could not access PCI config space!\n");

drivers/ssb/pci.c

323

pr_err("Could not access SPROM control register.\n");

drivers/ssb/pci.c

59

pr_err("Failed to switch to core %u\n", coreidx);

drivers/ssb/pci.c

864

pr_err("No SPROM available!\n");

drivers/ssb/pci.c

952

pr_err("FATAL ERROR: Bus powered down while accessing PCI MMIO space\n");

drivers/ssb/pcmcia.c

146

pr_err("Failed to switch to core %u\n", coreidx);

drivers/ssb/pcmcia.c

192

pr_err("Failed to switch pcmcia segment\n");

drivers/ssb/pcmcia.c

691

pr_err("PCMCIA: Failed to fetch device invariants: %s\n",

drivers/ssb/pcmcia.c

712

pr_err("PCMCIA: Failed to fetch MAC address\n");

drivers/ssb/pcmcia.c

722

pr_err("PCMCIA: Failed to fetch device invariants\n");

drivers/ssb/pcmcia.c

829

pr_err("Failed to initialize PCMCIA host device\n");

drivers/ssb/scan.c

154

pr_err("CHIPID not in nrcores fallback list\n");

drivers/ssb/scan.c

326

pr_err("More than %d ssb cores found (%d)\n",

drivers/ssb/sprom.c

132

pr_err("SPROM write: Could not freeze all devices\n");

drivers/ssb/sprom.c

138

pr_err("SPROM write: Could not thaw all devices\n");

drivers/ssb/ssb_private.h

206

pr_err("Serial flash not supported\n");

drivers/staging/greybus/audio_manager_module.c

216

pr_err("failed initializing kobject for audio module #%d\n", id);

drivers/staging/greybus/fw-core.c

274

pr_err("Failed to initialize fw-mgmt core (%d)\n", ret);

drivers/staging/greybus/fw-core.c

280

pr_err("Failed to initialize component authentication core (%d)\n",

drivers/staging/greybus/gbphy.c

330

pr_err("gbphy bus register failed (%d)\n", retval);

drivers/staging/greybus/gbphy.c

336

pr_err("error registering greybus driver\n");

drivers/staging/greybus/uart.c

953

pr_err("Can not allocate tty driver\n");

drivers/staging/greybus/uart.c

971

pr_err("Can not register tty driver: %d\n", retval);

drivers/staging/media/av7110/av7110.c

1112

pr_err("%s(): av7110_fw_request error\n", __func__);

drivers/staging/media/av7110/av7110.c

122

pr_err("cannot set internal volume to maximum:%d\n", ret);

drivers/staging/media/av7110/av7110.c

127

pr_err("unable to set aspect ratio\n");

drivers/staging/media/av7110/av7110.c

131

pr_err("unable to set pan scan\n");

drivers/staging/media/av7110/av7110.c

135

pr_err("unable to configure 4:3 wss\n");

drivers/staging/media/av7110/av7110.c

138

pr_err("unable to configure 16:9 wss\n");

drivers/staging/media/av7110/av7110.c

142

pr_err("cannot set video mode:%d\n", ret);

drivers/staging/media/av7110/av7110.c

1437

pr_err("this is not an av7110 firmware\n");

drivers/staging/media/av7110/av7110.c

1448

pr_err("dpram file is way too big.\n");

drivers/staging/media/av7110/av7110.c

1452

pr_err("crc32 of dpram file does not match.\n");

drivers/staging/media/av7110/av7110.c

1467

pr_err("root file has strange size (%d). aborting.\n", len);

drivers/staging/media/av7110/av7110.c

1471

pr_err("crc32 of root file does not match.\n");

drivers/staging/media/av7110/av7110.c

1493

pr_err("could not load firmware, file not found: dvb-ttpci-01.fw\n");

drivers/staging/media/av7110/av7110.c

1494

pr_err("usually this should be in /usr/lib/hotplug/firmware or /lib/firmware\n");

drivers/staging/media/av7110/av7110.c

1495

pr_err("and can be downloaded from https://linuxtv.org/download/dvb/firmware/\n");

drivers/staging/media/av7110/av7110.c

1497

pr_err("cannot request firmware (error %i)\n", ret);

drivers/staging/media/av7110/av7110.c

1503

pr_err("this firmware is way too small.\n");

drivers/staging/media/av7110/av7110.c

175

pr_err("cannot switch on SCART(Main):%d\n", ret);

drivers/staging/media/av7110/av7110.c

178

pr_err("cannot switch on SCART(AD):%d\n", ret);

drivers/staging/media/av7110/av7110.c

1819

pr_err("nexusca: pll transfer failed!\n");

drivers/staging/media/av7110/av7110.c

193

pr_err("cannot set volume :%d\n", ret);

drivers/staging/media/av7110/av7110.c

2226

pr_err("LNBP21 not found!\n");

drivers/staging/media/av7110/av7110.c

2242

pr_err("A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",

drivers/staging/media/av7110/av7110.c

2258

pr_err("av7110: Frontend registration failed!\n");

drivers/staging/media/av7110/av7110.c

250

pr_err("ARM crashed @ card %d\n", av7110->dvb_adapter.num);

drivers/staging/media/av7110/av7110.c

335

pr_err("%s(): saa7146_wait_for_debi_done timed out\n", __func__);

drivers/staging/media/av7110/av7110.c

360

pr_err("DEBI irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n", jiffies,

drivers/staging/media/av7110/av7110.c

458

pr_err("GPIO0 irq oops @ %ld, psr:0x%08x, ssr:0x%08x\n", jiffies,

drivers/staging/media/av7110/av7110.c

462

pr_err("%s(): saa7146_wait_for_debi_done timed out\n", __func__);

drivers/staging/media/av7110/av7110.c

654

pr_err("%s(): unknown irq: type=%d len=%d\n", __func__,

drivers/staging/media/av7110/av7110.c

795

pr_err("%s(): error buf %04x %04x %04x %04x ret %d handle %04x\n",

drivers/staging/media/av7110/av7110.c

824

pr_err("%s(): tried to stop invalid filter %04x, filter type = %x\n",

drivers/staging/media/av7110/av7110.c

836

pr_err("%s(): error cmd %04x %04x %04x ret %x resp %04x %04x pid %d\n", __func__,

drivers/staging/media/av7110/av7110_av.c

1008

pr_err("not audio source memory\n");

drivers/staging/media/av7110/av7110_hw.c

149

pr_err("%s(): timeout at block %d\n", __func__, i);

drivers/staging/media/av7110/av7110_hw.c

164

pr_err("%s(): timeout at last block\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

179

pr_err("%s(): timeout after last block\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

185

pr_err("%s(): final handshake timeout\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

224

pr_err("debi test in %s() failed: %08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",

drivers/staging/media/av7110/av7110_hw.c

240

pr_err("Failed to load firmware \"%s\"\n", fw_name);

drivers/staging/media/av7110/av7110_hw.c

249

pr_err("%s(): saa7146_wait_for_debi_done() timed out\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

257

pr_err("%s(): load_dram() failed\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

268

pr_err("%s(): saa7146_wait_for_debi_done() timed out after loading DRAM\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

312

pr_err("%s(): timeout waiting for MSGSTATE %04x\n", __func__, stat & flags);

drivers/staging/media/av7110/av7110_hw.c

342

pr_err("%s(): timeout waiting for COMMAND idle\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

359

pr_err("%s(): timeout waiting for HANDSHAKE_REG\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

398

pr_err("%s(): %s QUEUE overflow\n", __func__, type);

drivers/staging/media/av7110/av7110_hw.c

404

pr_err("%s(): timeout waiting on busy %s QUEUE\n", __func__, type);

drivers/staging/media/av7110/av7110_hw.c

432

pr_err("%s(): timeout waiting for COMMAND %d to complete\n",

drivers/staging/media/av7110/av7110_hw.c

441

pr_err("%s(): GPMQOver\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

444

pr_err("%s(): OSDQOver\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

468

pr_err("%s(): error %d\n", __func__, ret);

drivers/staging/media/av7110/av7110_hw.c

497

pr_err("%s(): error %d\n", __func__, ret);

drivers/staging/media/av7110/av7110_hw.c

51

pr_err("%s(): invalid count %d\n", __func__, count);

drivers/staging/media/av7110/av7110_hw.c

519

pr_err("%s(): error %d\n", __func__, ret);

drivers/staging/media/av7110/av7110_hw.c

547

pr_err("%s(): error %d\n", __func__, err);

drivers/staging/media/av7110/av7110_hw.c

55

pr_err("%s(): wait_for_debi_done failed\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

557

pr_err("%s(): timeout waiting for COMMAND to complete\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

573

pr_err("%s(): timeout waiting for HANDSHAKE_REG\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

584

pr_err("%s(): GPMQOver\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

588

pr_err("%s(): OSDQOver\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

607

pr_err("%s(): error %d\n", __func__, ret);

drivers/staging/media/av7110/av7110_hw.c

624

pr_err("failed to boot firmware @ card %d\n", av7110->dvb_adapter.num);

drivers/staging/media/av7110/av7110_hw.c

673

pr_err("%s(): error %d\n", __func__, ret);

drivers/staging/media/av7110/av7110_hw.c

718

pr_err("%s(): timeout waiting for BUFF1_BASE == 0\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

74

pr_err("%s(): invalid count %d\n", __func__, count);

drivers/staging/media/av7110/av7110_hw.c

744

pr_err("%s(): timeout waiting for BUFF1_BASE == 0\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

757

pr_err("%s(): timeout waiting for HANDSHAKE_REG\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

772

pr_err("%s(): error %d\n", __func__, ret);

drivers/staging/media/av7110/av7110_hw.c

78

pr_err("%s(): wait_for_debi_done #1 failed\n", __func__);

drivers/staging/media/av7110/av7110_hw.c

89

pr_err("%s(): wait_for_debi_done #2 failed\n", __func__);

drivers/staging/media/av7110/sp8870.c

136

pr_err("%s(): firmware upload failed!\n", __func__);

drivers/staging/media/av7110/sp8870.c

137

pr_err("%s(): i2c error (err == %i)\n", __func__, err);

drivers/staging/media/av7110/sp8870.c

325

pr_err("no firmware upload (timeout or file not found?)\n");

drivers/staging/media/av7110/sp8870.c

330

pr_err("writing firmware to device failed\n");

drivers/staging/media/av7110/sp8870.c

506

pr_err("%s(): firmware crash!!!!!!\n", __func__);

drivers/staging/media/ipu7/ipu7-isys-subdev.c

298

pr_err("isys subdev init failed %d.\n", ret);

drivers/staging/media/ipu7/ipu7-isys-video.c

661

pr_err("ipu7-isys: no available stream\n");

drivers/staging/most/dim2/dim2.c

153

pr_err("%s: error_id - %d, error_message - %s\n", __func__, error_id,

drivers/staging/most/dim2/dim2.c

475

pr_err("%s: too small buffer size\n", hdm_ch->name);

drivers/staging/most/dim2/dim2.c

489

pr_err("%s: too small buffer size\n", hdm_ch->name);

drivers/staging/most/dim2/dim2.c

503

pr_err("%s: invalid sub-buffer size or too small buffer size\n",

drivers/staging/most/dim2/dim2.c

517

pr_err("%s: invalid sub-buffer size or too small buffer size\n",

drivers/staging/most/dim2/dim2.c

529

pr_err("%s: configure failed, bad channel type: %d\n",

drivers/staging/most/dim2/dim2.c

536

pr_err("%s: configure failed (%d), type: %d, is_tx: %d\n",

drivers/staging/most/dim2/dim2.c

611

pr_err("Async Tx Not initialized\n");

drivers/staging/most/dim2/dim2.c

660

pr_err("HAL Failed to close channel %s\n", hdm_ch->name);

drivers/staging/most/net/net.c

137

pr_err("drop: too large packet! (%u)\n", skb->len);

drivers/staging/most/net/net.c

142

pr_err("drop: too small buffer! (%d for %d)\n",

drivers/staging/most/net/net.c

343

pr_err("direction is allocated\n");

drivers/staging/most/net/net.c

349

pr_err("register_netdev() failed\n");

drivers/staging/most/net/net.c

85

pr_err("drop: too large packet! (%u)\n", skb->len);

drivers/staging/most/net/net.c

90

pr_err("drop: too small buffer! (%d for %d)\n",

drivers/staging/most/net/net.c

96

pr_err("drop: too small packet! (%d)\n", skb->len);

drivers/staging/most/video/video.c

462

pr_err("Channel already linked\n");

drivers/staging/most/video/video.c

467

pr_err("Wrong direction, expected rx\n");

drivers/staging/most/video/video.c

473

pr_err("Wrong channel type, expected sync or isoc\n");

drivers/staging/most/video/video.c

493

pr_err("v4l2_device_register() failed\n");

drivers/staging/most/video/video.c

519

pr_err("no such channel is linked\n");

drivers/staging/octeon/ethernet-spi.c

23

pr_err("SPI%d: SRX Spi4 interface down\n", index);

drivers/staging/octeon/ethernet-spi.c

25

pr_err("SPI%d: SRX Spi4 Calendar table parity error\n", index);

drivers/staging/octeon/ethernet-spi.c

27

pr_err("SPI%d: SRX Consecutive Spi4 DIP4 errors have exceeded SPX_ERR_CTL[ERRCNT]\n",

drivers/staging/octeon/ethernet-spi.c

30

pr_err("SPI%d: SRX Spi4 DIP4 error\n", index);

drivers/staging/octeon/ethernet-spi.c

32

pr_err("SPI%d: SRX Selected port has hit TPA overflow\n",

drivers/staging/octeon/ethernet-spi.c

35

pr_err("SPI%d: SRX Spi4 reserved control word detected\n",

drivers/staging/octeon/ethernet-spi.c

38

pr_err("SPI%d: SRX Spi4 receive FIFO drowning/overflow\n",

drivers/staging/octeon/ethernet-spi.c

41

pr_err("SPI%d: SRX Spi4 packet closed on non-16B alignment without EOP\n",

drivers/staging/octeon/ethernet-spi.c

44

pr_err("SPI%d: SRX Spi4 async FIFO overflow\n", index);

drivers/staging/octeon/ethernet-spi.c

46

pr_err("SPI%d: SRX Abnormal packet termination (ERR bit)\n",

drivers/staging/octeon/ethernet-spi.c

49

pr_err("SPI%d: SRX Port out of range\n", index);

drivers/staging/octeon/ethernet-spi.c

55

pr_err("SPI%d: STX Interface encountered a fatal error\n",

drivers/staging/octeon/ethernet-spi.c

58

pr_err("SPI%d: STX FRMCNT has exceeded STX_DIP_CNT[MAXFRM]\n",

drivers/staging/octeon/ethernet-spi.c

61

pr_err("SPI%d: STX Unexpected framing sequence\n", index);

drivers/staging/octeon/ethernet-spi.c

63

pr_err("SPI%d: STX ERRCNT has exceeded STX_DIP_CNT[MAXDIP]\n",

drivers/staging/octeon/ethernet-spi.c

66

pr_err("SPI%d: STX DIP2 error on the Spi4 Status channel\n",

drivers/staging/octeon/ethernet-spi.c

69

pr_err("SPI%d: STX Spi4 FIFO overflow error\n", index);

drivers/staging/octeon/ethernet-spi.c

71

pr_err("SPI%d: STX Transmit packet burst too big\n", index);

drivers/staging/octeon/ethernet-spi.c

73

pr_err("SPI%d: STX Calendar Table Parity Error Bank%d\n",

drivers/staging/octeon/ethernet-spi.c

76

pr_err("SPI%d: STX Calendar Table Parity Error Bank%d\n",

drivers/staging/octeon/ethernet.c

688

pr_err("Error: No 'pip' in /aliases\n");

drivers/staging/octeon/ethernet.c

786

pr_err("Failed to register ethernet device for POW\n");

drivers/staging/octeon/ethernet.c

795

pr_err("Failed to allocate ethernet device for POW\n");

drivers/staging/octeon/ethernet.c

815

pr_err("Failed to allocate ethernet device for port %d\n",

drivers/staging/octeon/ethernet.c

900

pr_err("Failed to register ethernet device for interface %d, port %d\n",

drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c

332

pr_err("Request firmware failed with error 0x%x\n", rtStatus);

drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c

338

pr_err("Firmware %s not available\n", fwfilepath);

drivers/staging/rtl8723bs/os_dep/os_intfs.c

411

pr_err("dev_alloc_name, fail for %s\n", ifname);

drivers/staging/sm750fb/sm750.c

392

pr_err("bpp %d not supported\n", var->bits_per_pixel);

drivers/staging/sm750fb/sm750.c

496

pr_err("bpp %d not supported\n", var->bits_per_pixel);

drivers/staging/sm750fb/sm750.c

511

pr_err("not enough video memory for mode\n");

drivers/staging/sm750fb/sm750.c

536

pr_err("regno = %d\n", regno);

drivers/staging/sm750fb/sm750.c

899

pr_err("Could not allocate memory for cmap.\n");

drivers/staging/sm750fb/sm750_hw.c

308

pr_err("Set mode timing failed\n");

drivers/staging/sm750fb/sm750_hw.c

42

pr_err("Can not request PCI regions.\n");

drivers/staging/sm750fb/sm750_hw.c

50

pr_err("mmio failed\n");

drivers/staging/sm750fb/sm750_hw.c

77

pr_err("Map video memory failed\n");

drivers/staging/vme_user/vme_fake.c

1063

pr_err("VME geographical address must be between 0 and %d (exclusive), but got %d\n",

drivers/staging/vme_user/vme_fake.c

1189

pr_err("CR/CSR configuration failed.\n");

drivers/staging/vme_user/vme_fake.c

1195

pr_err("Chip Registration failed.\n");

drivers/staging/vme_user/vme_fake.c

187

pr_err("Invalid address space\n");

drivers/staging/vme_user/vme_fake.c

198

pr_err("Invalid VME base alignment\n");

drivers/staging/vme_user/vme_fake.c

202

pr_err("Invalid VME bound alignment\n");

drivers/staging/vme_user/vme_fake.c

266

pr_err("Invalid VME Window alignment\n");

drivers/staging/vme_user/vme_fake.c

272

pr_err("Invalid size alignment\n");

drivers/staging/vme_user/vme_fake.c

278

pr_err("Size must be non-zero for enabled windows\n");

drivers/staging/vme_user/vme_fake.c

290

pr_err("Invalid data width\n");

drivers/staging/vme_user/vme_fake.c

308

pr_err("Invalid address space\n");

drivers/staging/vme_user/vme_fake.c

864

pr_err("Location monitor callback attached, can't reset\n");

drivers/staging/vme_user/vme_fake.c

877

pr_err("Invalid address space\n");

drivers/staging/vme_user/vme_fake.c

932

pr_err("Location monitor not properly configured\n");

drivers/staging/vme_user/vme_fake.c

939

pr_err("Existing callback attached\n");

drivers/staging/vme_user/vme_user.c

737

pr_err("No cards, skipping registration\n");

drivers/staging/vme_user/vme_user.c

746

pr_err("Driver only able to handle %d buses\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1004

pr_err("%s - device not up - dropping\n", __func__);

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1035

pr_err("%s - device not up - dropping\n", __func__);

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1239

pr_err("%s connect request on invalid stid %d\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1245

pr_err("%s - listening parent not in CSK_STATE_LISTEN\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1252

pr_err("%s csk not null tid %u\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1286

pr_err("%s - failed to find dst entry!\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1300

pr_err("%s - failed to allocate l2t entry!\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1494

pr_err("%s: csk 0x%p, tid %u, state %u\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

161

pr_err("Unable to find clip table entry. laddr %pI6. Error:%d.\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1636

pr_err("can't find connection for tid %u.\n", tid);

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1736

pr_err("%s: got neg advise %d on tid %u\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1814

pr_err("csk 0x%p, tid %u, credit %u > %u\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1825

pr_err("csk 0x%p, tid %u, credit %u + %u != %u.\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1850

pr_err("csk 0x%p,%u, cr %u,%u+%u, empty.\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

187

pr_err("create server6 err %d stid %d laddr %pI6 lport %d\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1907

pr_err("can't find connection for tid %u.\n", tid);

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1928

pr_err("can't find conn. for tid %u.\n", tid);

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1992

pr_err("can't find conn. for tid %u.\n", tid);

drivers/target/iscsi/cxgbit/cxgbit_cm.c

223

pr_err("create server failed err %d stid %d laddr %pI4 lport %d\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

251

pr_err("Bond devices are not supported. Interface:%s\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

43

pr_err("%s: err:%u", func, ret);

drivers/target/iscsi/cxgbit/cxgbit_cm.c

745

pr_err("%s: csk %p; state %d\n",

drivers/target/iscsi/cxgbit/cxgbit_main.c

387

pr_err("%s: csk NULL, op 0x%x.\n", __func__, op);

drivers/target/iscsi/cxgbit/cxgbit_main.c

522

pr_err("No handler for opcode 0x%x.\n", op);

drivers/target/iscsi/cxgbit/cxgbit_main.c

527

pr_err("%s OOM bailing out.\n", __func__);

drivers/target/iscsi/cxgbit/cxgbit_target.c

1040

pr_err("ITT: 0x%08x, Offset: %u, Length: %u,"

drivers/target/iscsi/cxgbit/cxgbit_target.c

1102

pr_err("Unable to recover from"

drivers/target/iscsi/cxgbit/cxgbit_target.c

1126

pr_err("Unable to allocate memory for"

drivers/target/iscsi/cxgbit/cxgbit_target.c

1170

pr_err("Unable to recover from"

drivers/target/iscsi/cxgbit/cxgbit_target.c

1189

pr_err("Unable to allocate text_in of payload_length: %u\n",

drivers/target/iscsi/cxgbit/cxgbit_target.c

1273

pr_err("Got unknown iSCSI OpCode: 0x%02x\n", opcode);

drivers/target/iscsi/cxgbit/cxgbit_target.c

1306

pr_err("Received illegal iSCSI Opcode: 0x%02x"

drivers/target/iscsi/cxgbit/cxgbit_target.c

603

pr_err("param not found key %s\n", HEADERDIGEST);

drivers/target/iscsi/cxgbit/cxgbit_target.c

613

pr_err("param not found key %s\n", DATADIGEST);

drivers/target/iscsi/cxgbit/cxgbit_target.c

641

pr_err("param not found key %s\n", MAXBURSTLENGTH);

drivers/target/iscsi/cxgbit/cxgbit_target.c

688

pr_err("param not found key %s\n", DATASEQUENCEINORDER);

drivers/target/iscsi/cxgbit/cxgbit_target.c

698

pr_err("param not found key %s\n", DATAPDUINORDER);

drivers/target/iscsi/cxgbit/cxgbit_target.c

734

pr_err("param not found key %s\n", ERRORRECOVERYLEVEL);

drivers/target/iscsi/cxgbit/cxgbit_target.c

844

pr_err("Unable to allocate iscsit_cmd + cxgbit_cmd\n");

drivers/target/iscsi/cxgbit/cxgbit_target.c

864

pr_err("ImmediateData CRC32C DataDigest error\n");

drivers/target/iscsi/cxgbit/cxgbit_target.c

866

pr_err("Unable to recover from"

drivers/target/iscsi/iscsi_target.c

1011

pr_err("ISCSI_FLAG_CMD_WRITE & ISCSI_FLAG_CMD_FINAL"

drivers/target/iscsi/iscsi_target.c

1039

pr_err("ISCSI_FLAG_CMD_READ and/or ISCSI_FLAG_CMD_WRITE"

drivers/target/iscsi/iscsi_target.c

1048

pr_err("Bidirectional operations not supported!\n");

drivers/target/iscsi/iscsi_target.c

1054

pr_err("Illegally set Immediate Bit in iSCSI Initiator"

drivers/target/iscsi/iscsi_target.c

1061

pr_err("ImmediateData=No but DataSegmentLength=%u,"

drivers/target/iscsi/iscsi_target.c

1069

pr_err("Expected Data Transfer Length and Length of"

drivers/target/iscsi/iscsi_target.c

1077

pr_err("DataSegmentLength: %u is greater than"

drivers/target/iscsi/iscsi_target.c

1085

pr_err("DataSegmentLength: %u is greater than"

drivers/target/iscsi/iscsi_target.c

1093

pr_err("DataSegmentLength: %u is greater than"

drivers/target/iscsi/iscsi_target.c

1105

pr_err("Additional Header Segment type %d not supported!\n",

drivers/target/iscsi/iscsi_target.c

119

pr_err("Target IQN exceeds %d bytes\n",

drivers/target/iscsi/iscsi_target.c

144

pr_err("idr_alloc() failed for tiqn->tiqn_index\n");

drivers/target/iscsi/iscsi_target.c

1456

pr_err("Command ITT: 0x%08x received DataOUT after"

drivers/target/iscsi/iscsi_target.c

1463

pr_err("Command ITT: 0x%08x received DataOUT for a"

drivers/target/iscsi/iscsi_target.c

1471

pr_err("DataOut Offset: %u, Length %u greater than iSCSI Command EDTL %u, protocol error.\n",

drivers/target/iscsi/iscsi_target.c

1481

pr_err("Received unexpected unsolicited data"

drivers/target/iscsi/iscsi_target.c

1626

pr_err("ITT: 0x%08x, Offset: %u, Length: %u,"

drivers/target/iscsi/iscsi_target.c

1709

pr_err("NopOUT Flag's, Left Most Bit not set, protocol error.\n");

drivers/target/iscsi/iscsi_target.c

1719

pr_err("NOPOUT ITT is reserved, but Immediate Bit is"

drivers/target/iscsi/iscsi_target.c

1730

pr_err("NOPOUT Ping Data DataSegmentLength: %u is"

drivers/target/iscsi/iscsi_target.c

185

pr_err("iscsit_set_tiqn_shutdown() failed\n");

drivers/target/iscsi/iscsi_target.c

1886

pr_err("Ping data CRC32C DataDigest"

drivers/target/iscsi/iscsi_target.c

1890

pr_err("Unable to recover from"

drivers/target/iscsi/iscsi_target.c

1978

pr_err("RefTaskTag should be set to 0xFFFFFFFF.\n");

drivers/target/iscsi/iscsi_target.c

1984

pr_err("Task Management Request TASK_REASSIGN not"

drivers/target/iscsi/iscsi_target.c

2017

pr_err("Unknown iSCSI TMR Function:"

drivers/target/iscsi/iscsi_target.c

2088

pr_err("Unknown TMR function: 0x%02x, protocol"

drivers/target/iscsi/iscsi_target.c

2145

pr_err("Unable to accept text parameter length: %u"

drivers/target/iscsi/iscsi_target.c

2154

pr_err("Multi sequence text commands currently not supported\n");

drivers/target/iscsi/iscsi_target.c

2188

pr_err("Unable to locate text_in buffer for sendtargets"

drivers/target/iscsi/iscsi_target.c

2195

pr_err("Received Text Data that is not"

drivers/target/iscsi/iscsi_target.c

2208

pr_err("Unable to locate valid SendTargets%s value\n",

drivers/target/iscsi/iscsi_target.c

2286

pr_err("Text data CRC32C DataDigest"

drivers/target/iscsi/iscsi_target.c

2290

pr_err("Unable to recover from"

drivers/target/iscsi/iscsi_target.c

2410

pr_err("Received Logout Request REMOVECONNFORRECOVERY"

drivers/target/iscsi/iscsi_target.c

2418

pr_err("Received Logout Request REMOVECONNFORRECOVERY"

drivers/target/iscsi/iscsi_target.c

2458

pr_err("Received logout request on connection that"

drivers/target/iscsi/iscsi_target.c

2527

pr_err("Initiator sent SNACK request while in"

drivers/target/iscsi/iscsi_target.c

2553

pr_err("R-Data SNACK Not Supported.\n");

drivers/target/iscsi/iscsi_target.c

2557

pr_err("Unknown SNACK type 0x%02x, protocol"

drivers/target/iscsi/iscsi_target.c

2644

pr_err("ImmediateData CRC32C DataDigest 0x%08x"

drivers/target/iscsi/iscsi_target.c

2649

pr_err("Unable to recover from"

drivers/target/iscsi/iscsi_target.c

2821

pr_err("iscsit_get_datain_values failed for ITT: 0x%08x\n",

drivers/target/iscsi/iscsi_target.c

2829

pr_err("Command ITT: 0x%08x, datain.offset: %u and"

drivers/target/iscsi/iscsi_target.c

2925

pr_err("Unable to locate CID: %hu for"

drivers/target/iscsi/iscsi_target.c

2940

pr_err("Unknown cmd->logout_reason: 0x%02x\n",

drivers/target/iscsi/iscsi_target.c

3348

pr_err("Unable to locate '=' string in text_in:"

drivers/target/iscsi/iscsi_target.c

3697

pr_err("Unknown Opcode: 0x%02x ITT:"

drivers/target/iscsi/iscsi_target.c

376

pr_err("Unable to create kthread: iscsi_np\n");

drivers/target/iscsi/iscsi_target.c

3798

pr_err("Unknown Opcode: 0x%02x ITT:"

drivers/target/iscsi/iscsi_target.c

3824

pr_err("Unknown Opcode: 0x%02x ITT:"

drivers/target/iscsi/iscsi_target.c

3980

pr_err("Got unknown iSCSI OpCode: 0x%02x\n", hdr->opcode);

drivers/target/iscsi/iscsi_target.c

3982

pr_err("Cannot recover from unknown"

drivers/target/iscsi/iscsi_target.c

3986

pr_err("Unable to recover from unknown opcode while OFMarker=No,"

drivers/target/iscsi/iscsi_target.c

4070

pr_err("HeaderDigest CRC32C failed,"

drivers/target/iscsi/iscsi_target.c

4093

pr_err("Received illegal iSCSI Opcode: 0x%02x"

drivers/target/iscsi/iscsi_target.c

4462

pr_err("%d connection(s) still exist for iSCSI session"

drivers/target/iscsi/iscsi_target.c

695

pr_err("Unable to allocate iscsit_global->allowed_cpumask\n");

drivers/target/iscsi/iscsi_target.c

704

pr_err("Unable to kmem_cache_create() for"

drivers/target/iscsi/iscsi_target.c

713

pr_err("Unable to kmem_cache_create() for"

drivers/target/iscsi/iscsi_target.c

722

pr_err("Unable to kmem_cache_create() for"

drivers/target/iscsi/iscsi_target.c

731

pr_err("Unable to kmem_cache_create() for"

drivers/target/iscsi/iscsi_target.c

803

pr_err("Unable to allocate memory for cmd->buf_ptr\n");

drivers/target/iscsi/iscsi_target.c

829

pr_err("cmd->conn is NULL for ITT: 0x%08x\n",

drivers/target/iscsi/iscsi_target.c

840

pr_err("Unable to allocate memory for cmd->buf_ptr\n");

drivers/target/iscsi/iscsi_target.c

896

pr_err("Initial page entry out-of-bounds\n");

drivers/target/iscsi/iscsi_target.c

928

pr_err("offset %d + length %d overflow; %d/%d; sg-list:\n",

drivers/target/iscsi/iscsi_target.c

932

pr_err("[%d] off %d len %d\n",

drivers/target/iscsi/iscsi_target_auth.c

104

pr_err("Unable to locate CHAP_A key\n");

drivers/target/iscsi/iscsi_target_auth.c

121

pr_err("failed to allocate %s algo\n", digest_name);

drivers/target/iscsi/iscsi_target_auth.c

150

pr_err("CHAP user or password not set for"

drivers/target/iscsi/iscsi_target_auth.c

176

pr_err("Unsupported CHAP_A value\n");

drivers/target/iscsi/iscsi_target_auth.c

266

pr_err("Unable to allocate the digest buffer\n");

drivers/target/iscsi/iscsi_target_auth.c

272

pr_err("Unable to allocate the response buffer\n");

drivers/target/iscsi/iscsi_target_auth.c

278

pr_err("Unable to allocate the client_digest buffer\n");

drivers/target/iscsi/iscsi_target_auth.c

284

pr_err("Unable to allocate the server_digest buffer\n");

drivers/target/iscsi/iscsi_target_auth.c

294

pr_err("Unable to allocate challenge buffer\n");

drivers/target/iscsi/iscsi_target_auth.c

300

pr_err("Unable to allocate initiatorchg_binhex buffer\n");

drivers/target/iscsi/iscsi_target_auth.c

308

pr_err("Could not find CHAP_N.\n");

drivers/target/iscsi/iscsi_target_auth.c

312

pr_err("Could not find CHAP_N.\n");

drivers/target/iscsi/iscsi_target_auth.c

319

pr_err("CHAP_N values do not match!\n");

drivers/target/iscsi/iscsi_target_auth.c

328

pr_err("Could not find CHAP_R.\n");

drivers/target/iscsi/iscsi_target_auth.c

335

pr_err("Malformed CHAP_R\n");

drivers/target/iscsi/iscsi_target_auth.c

339

pr_err("Malformed CHAP_R: invalid HEX\n");

drivers/target/iscsi/iscsi_target_auth.c

346

pr_err("Malformed CHAP_R: invalid BASE64\n");

drivers/target/iscsi/iscsi_target_auth.c

351

pr_err("Could not find CHAP_R\n");

drivers/target/iscsi/iscsi_target_auth.c

360

pr_err("Unable to allocate struct crypto_shash\n");

drivers/target/iscsi/iscsi_target_auth.c

366

pr_err("Unable to allocate struct shash_desc\n");

drivers/target/iscsi/iscsi_target_auth.c

374

pr_err("crypto_shash_init() failed\n");

drivers/target/iscsi/iscsi_target_auth.c

380

pr_err("crypto_shash_update() failed for id\n");

drivers/target/iscsi/iscsi_target_auth.c

387

pr_err("crypto_shash_update() failed for password\n");

drivers/target/iscsi/iscsi_target_auth.c

394

pr_err("crypto_shash_finup() failed for challenge\n");

drivers/target/iscsi/iscsi_target_auth.c

427

pr_err("Could not find CHAP_I.\n");

drivers/target/iscsi/iscsi_target_auth.c

437

pr_err("kstrtoul() failed for CHAP identifier: %d\n", ret);

drivers/target/iscsi/iscsi_target_auth.c

441

pr_err("chap identifier: %lu greater than 255\n", id);

drivers/target/iscsi/iscsi_target_auth.c

453

pr_err("Could not find CHAP_C.\n");

drivers/target/iscsi/iscsi_target_auth.c

461

pr_err("Unable to convert incoming challenge\n");

drivers/target/iscsi/iscsi_target_auth.c

465

pr_err("CHAP_C exceeds maximum binary size of 1024 bytes\n");

drivers/target/iscsi/iscsi_target_auth.c

471

pr_err("Malformed CHAP_C: invalid HEX\n");

drivers/target/iscsi/iscsi_target_auth.c

480

pr_err("Malformed CHAP_C: invalid BASE64\n");

drivers/target/iscsi/iscsi_target_auth.c

484

pr_err("Unable to convert incoming challenge\n");

drivers/target/iscsi/iscsi_target_auth.c

488

pr_err("CHAP_C exceeds maximum binary size of 1024 bytes\n");

drivers/target/iscsi/iscsi_target_auth.c

493

pr_err("Could not find CHAP_C.\n");

drivers/target/iscsi/iscsi_target_auth.c

506

pr_err("initiator CHAP_C matches target CHAP_C, failing"

drivers/target/iscsi/iscsi_target_auth.c

515

pr_err("crypto_shash_init() failed\n");

drivers/target/iscsi/iscsi_target_auth.c

523

pr_err("crypto_shash_update() failed for id\n");

drivers/target/iscsi/iscsi_target_auth.c

530

pr_err("crypto_shash_update() failed for"

drivers/target/iscsi/iscsi_target_auth.c

540

pr_err("crypto_shash_finup() failed for ma challenge\n");

drivers/target/iscsi/iscsi_target_auth.c

94

pr_err("Memory allocation failed for CHAP_A temporary buffer\n");

drivers/target/iscsi/iscsi_target_configfs.c

1056

pr_err("Unable to locate \"tpgt_#\" directory"

drivers/target/iscsi/iscsi_target_configfs.c

1299

pr_err("Illegal value for enforce_discovery_auth:"

drivers/target/iscsi/iscsi_target_configfs.c

1305

pr_err("iscsit_global->discovery_tpg is NULL\n");

drivers/target/iscsi/iscsi_target_configfs.c

167

pr_err("strlen(name): %d exceeds MAX_PORTAL_LEN: %d\n",

drivers/target/iscsi/iscsi_target_configfs.c

177

pr_err("Unable to locate trailing \"]\""

drivers/target/iscsi/iscsi_target_configfs.c

188

pr_err("Unable to locate \":port\""

drivers/target/iscsi/iscsi_target_configfs.c

198

pr_err("Unable to locate \":port\""

drivers/target/iscsi/iscsi_target_configfs.c

209

pr_err("malformed ip/port passed: %s\n", name);

drivers/target/iscsi/iscsi_target_configfs.c

661

pr_err("Passed cmdsn_depth: %u exceeds"

drivers/target/iscsi/iscsi_target_configfs.c

668

pr_err("Unable to locate acl_ci\n");

drivers/target/iscsi/iscsi_target_configfs.c

673

pr_err("Unable to locate tpg_ci\n");

drivers/target/iscsi/iscsi_target_configfs.c

678

pr_err("Unable to locate config_item wwn_ci\n");

drivers/target/iscsi/iscsi_target_configfs.c

70

pr_err("Illegal value for tpg_enable: %u\n", op);

drivers/target/iscsi/iscsi_target_configfs.c

75

pr_err("Unable to locate struct iscsi_np from"

drivers/target/iscsi/iscsi_target_datain_values.c

105

pr_err("ITT: 0x%08x read_data_left is zero!\n",

drivers/target/iscsi/iscsi_target_datain_values.c

204

pr_err("ITT: 0x%08x read_data_left is zero!\n",

drivers/target/iscsi/iscsi_target_datain_values.c

26

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_datain_values.c

325

pr_err("ITT: 0x%08x read_data_left is zero!\n",

drivers/target/iscsi/iscsi_target_datain_values.c

425

pr_err("ITT: 0x%08x read_data_left is zero!\n",

drivers/target/iscsi/iscsi_target_datain_values.c

66

pr_err("cmd->datain_list is empty for ITT:"

drivers/target/iscsi/iscsi_target_erl0.c

126

pr_err("Dumping DataOUT PDU Offset: %u Length: %d DataSN:"

drivers/target/iscsi/iscsi_target_erl0.c

143

pr_err("Command ITT: 0x%08x with Offset: %u,"

drivers/target/iscsi/iscsi_target_erl0.c

154

pr_err("Total %u bytes exceeds FirstBurstLength: %u"

drivers/target/iscsi/iscsi_target_erl0.c

177

pr_err("Unsolicited non-immediate data"

drivers/target/iscsi/iscsi_target_erl0.c

188

pr_err("Command ITT: 0x%08x reached"

drivers/target/iscsi/iscsi_target_erl0.c

195

pr_err("Command ITT: 0x%08x reached"

drivers/target/iscsi/iscsi_target_erl0.c

231

pr_err("Command ITT: 0x%08x with Offset: %u,"

drivers/target/iscsi/iscsi_target_erl0.c

263

pr_err("Command ITT: 0x%08x, NextBurstLength: %u and"

drivers/target/iscsi/iscsi_target_erl0.c

289

pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"

drivers/target/iscsi/iscsi_target_erl0.c

296

pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"

drivers/target/iscsi/iscsi_target_erl0.c

306

pr_err("Command ITT: 0x%08x reached"

drivers/target/iscsi/iscsi_target_erl0.c

314

pr_err("Command ITT: 0x%08x reached"

drivers/target/iscsi/iscsi_target_erl0.c

322

pr_err("Command ITT: 0x%08x reached"

drivers/target/iscsi/iscsi_target_erl0.c

360

pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"

drivers/target/iscsi/iscsi_target_erl0.c

365

pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"

drivers/target/iscsi/iscsi_target_erl0.c

375

pr_err("Unable to perform within-command recovery"

drivers/target/iscsi/iscsi_target_erl0.c

406

pr_err("Command ITT: 0x%08x, received offset"

drivers/target/iscsi/iscsi_target_erl0.c

416

pr_err("Command ITT: 0x%08x, received offset"

drivers/target/iscsi/iscsi_target_erl0.c

422

pr_err("Command ITT: 0x%08x, received offset"

drivers/target/iscsi/iscsi_target_erl0.c

435

pr_err("Unable to perform within-command recovery"

drivers/target/iscsi/iscsi_target_erl0.c

469

pr_err("Command ITT: 0x%08x received already gotten"

drivers/target/iscsi/iscsi_target_erl0.c

732

pr_err("Unable to recover from DataOUT CRC"

drivers/target/iscsi/iscsi_target_erl0.c

757

pr_err("Exiting Time2Retain handler because"

drivers/target/iscsi/iscsi_target_erl0.c

764

pr_err("Time2Retain timer expired for SID: %u, cleaning up"

drivers/target/iscsi/iscsi_target_erl1.c

1069

pr_err("cmd->cmd_r2t_list is empty!\n");

drivers/target/iscsi/iscsi_target_erl1.c

1084

pr_err("Unable to locate any incomplete DataOUT"

drivers/target/iscsi/iscsi_target_erl1.c

1115

pr_err("Unable to recover from DataOut timeout while"

drivers/target/iscsi/iscsi_target_erl1.c

1124

pr_err("Command ITT: 0x%08x exceeded max retries"

drivers/target/iscsi/iscsi_target_erl1.c

126

pr_err("ITT: 0x%08x, R2T SNACK requesting"

drivers/target/iscsi/iscsi_target_erl1.c

137

pr_err("Command ITT: 0x%08x received R2T SNACK"

drivers/target/iscsi/iscsi_target_erl1.c

227

pr_err("struct iscsit_cmd->seq_list is NULL!\n");

drivers/target/iscsi/iscsi_target_erl1.c

251

pr_err("Ignoring non-sent sequence 0x%08x ->"

drivers/target/iscsi/iscsi_target_erl1.c

264

pr_err("Pre BegRun sequence 0x%08x ->"

drivers/target/iscsi/iscsi_target_erl1.c

278

pr_err("Found sequence begrun: 0x%08x in"

drivers/target/iscsi/iscsi_target_erl1.c

337

pr_err("Post BegRun sequence 0x%08x -> 0x%08x\n",

drivers/target/iscsi/iscsi_target_erl1.c

348

pr_err("ITT: 0x%08x, Begrun: 0x%08x"

drivers/target/iscsi/iscsi_target_erl1.c

358

pr_err("Unable to locate struct iscsi_seq for ITT: 0x%08x,"

drivers/target/iscsi/iscsi_target_erl1.c

384

pr_err("Ignoring ITT: 0x%08x Data SNACK\n",

drivers/target/iscsi/iscsi_target_erl1.c

395

pr_err("ITT: 0x%08x, Data SNACK requesting"

drivers/target/iscsi/iscsi_target_erl1.c

409

pr_err("Initiator requesting BegRun: 0x%08x, RunLength"

drivers/target/iscsi/iscsi_target_erl1.c

458

pr_err("Unknown cmd->data_direction: 0x%02x\n",

drivers/target/iscsi/iscsi_target_erl1.c

481

pr_err("Got Status SNACK Begrun: 0x%08x, RunLength:"

drivers/target/iscsi/iscsi_target_erl1.c

503

pr_err("Unable to find StatSN: 0x%08x for"

drivers/target/iscsi/iscsi_target_erl1.c

514

pr_err("Ignoring Status SNACK for BegRun:"

drivers/target/iscsi/iscsi_target_erl1.c

541

pr_err("Data ACK SNACK for TTT: 0x%08x is"

drivers/target/iscsi/iscsi_target_erl1.c

547

pr_err("ITT: 0x%08x Data ACK SNACK BegRUN: 0x%08x is"

drivers/target/iscsi/iscsi_target_erl1.c

61

pr_err("Unable to allocate %u bytes for offload"

drivers/target/iscsi/iscsi_target_erl1.c

759

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_erl1.c

980

pr_err("Unknown iSCSI Logout Request Code:"

drivers/target/iscsi/iscsi_target_erl1.c

988

pr_err("Cannot perform out of order execution for"

drivers/target/iscsi/iscsi_target_erl2.c

158

pr_err("struct iscsi_conn_recovery pointer for ITT: 0x%08x"

drivers/target/iscsi/iscsi_target_erl2.c

273

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_login.c

1007

pr_err("Could not allocate memory for new connection\n");

drivers/target/iscsi/iscsi_target_login.c

1045

pr_err("Unable to allocate memory for struct iscsi_conn_ops.\n");

drivers/target/iscsi/iscsi_target_login.c

1050

pr_err("Unable to allocate conn->conn_cpumask\n");

drivers/target/iscsi/iscsi_target_login.c

1055

pr_err("Unable to allocate conn->allowed_cpumask\n");

drivers/target/iscsi/iscsi_target_login.c

1094

pr_err("iSCSI Login negotiation failed.\n");

drivers/target/iscsi/iscsi_target_login.c

1231

pr_err("iSCSI Network Portal on %pISpc currently not"

drivers/target/iscsi/iscsi_target_login.c

1294

pr_err("Unable to locate struct iscsit_conn->tpg\n");

drivers/target/iscsi/iscsi_target_login.c

226

pr_err("Could not allocate memory for session\n");

drivers/target/iscsi/iscsi_target_login.c

256

pr_err("Session ID allocation failed %d\n", ret);

drivers/target/iscsi/iscsi_target_login.c

274

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_login.c

43

pr_err("Unable to allocate memory for struct iscsi_login.\n");

drivers/target/iscsi/iscsi_target_login.c

479

pr_err("Initiator attempting to add a connection to"

drivers/target/iscsi/iscsi_target_login.c

52

pr_err("Unable to allocate memory for response buffer.\n");

drivers/target/iscsi/iscsi_target_login.c

538

pr_err("Connection exists with CID %hu for %s,"

drivers/target/iscsi/iscsi_target_login.c

576

pr_err("Adding additional connection to this session"

drivers/target/iscsi/iscsi_target_login.c

58

pr_err("Unable to allocate memory for request buffer.\n");

drivers/target/iscsi/iscsi_target_login.c

610

pr_err("bitmap_find_free_region() failed for"

drivers/target/iscsi/iscsi_target_login.c

618

pr_err("Unable to start iscsi_target_tx_thread\n");

drivers/target/iscsi/iscsi_target_login.c

627

pr_err("Unable to start iscsi_target_rx_thread\n");

drivers/target/iscsi/iscsi_target_login.c

79

pr_err("Unsupported iSCSI IETF Pre-RFC Revision,"

drivers/target/iscsi/iscsi_target_login.c

794

pr_err("Unsupported network_transport: %d\n",

drivers/target/iscsi/iscsi_target_login.c

802

pr_err("sock_create() failed.\n");

drivers/target/iscsi/iscsi_target_login.c

827

pr_err("kernel_bind() failed: %d\n", ret);

drivers/target/iscsi/iscsi_target_login.c

833

pr_err("kernel_listen() failed: %d\n", ret);

drivers/target/iscsi/iscsi_target_login.c

993

pr_err("try_module_get() failed for %s\n", t->name);

drivers/target/iscsi/iscsi_target_nego.c

1033

pr_err("MAX_LOGIN_PDUS count reached.\n");

drivers/target/iscsi/iscsi_target_nego.c

1069

pr_err("Illegal CSG: %d received from"

drivers/target/iscsi/iscsi_target_nego.c

112

pr_err("Unable to locate struct se_node_acl for CHAP auth\n");

drivers/target/iscsi/iscsi_target_nego.c

1132

pr_err("Unable to allocate memory for tmpbuf.\n");

drivers/target/iscsi/iscsi_target_nego.c

1162

pr_err("InitiatorName key not received"

drivers/target/iscsi/iscsi_target_nego.c

1180

pr_err("SessionType key not received"

drivers/target/iscsi/iscsi_target_nego.c

1216

pr_err("TargetName key not received"

drivers/target/iscsi/iscsi_target_nego.c

1230

pr_err("Unable to locate Target IQN: %s in"

drivers/target/iscsi/iscsi_target_nego.c

1244

pr_err("Unable to locate Target Portal Group"

drivers/target/iscsi/iscsi_target_nego.c

1290

pr_err("iSCSI Initiator Node: %s is not authorized to"

drivers/target/iscsi/iscsi_target_nego.c

174

pr_err("Received unknown opcode 0x%02x.\n",

drivers/target/iscsi/iscsi_target_nego.c

183

pr_err("Login request has both ISCSI_FLAG_LOGIN_CONTINUE"

drivers/target/iscsi/iscsi_target_nego.c

194

pr_err("Initiator unexpectedly changed login stage"

drivers/target/iscsi/iscsi_target_nego.c

205

pr_err("Illegal login_req->flags Combination, CSG: %d,"

drivers/target/iscsi/iscsi_target_nego.c

215

pr_err("Login request changed Version Max/Min"

drivers/target/iscsi/iscsi_target_nego.c

224

pr_err("Login request changed ISID unexpectedly,"

drivers/target/iscsi/iscsi_target_nego.c

232

pr_err("Login request changed ITT unexpectedly to"

drivers/target/iscsi/iscsi_target_nego.c

240

pr_err("Login request payload exceeds default"

drivers/target/iscsi/iscsi_target_nego.c

262

pr_err("SessionType key not received"

drivers/target/iscsi/iscsi_target_nego.c

277

pr_err("InitiatorName key not received"

drivers/target/iscsi/iscsi_target_nego.c

292

pr_err("Unable to locate"

drivers/target/iscsi/iscsi_target_nego.c

302

pr_err("Incorrect"

drivers/target/iscsi/iscsi_target_nego.c

795

pr_err("Security negotiation"

drivers/target/iscsi/iscsi_target_nego.c

801

pr_err("Received unknown error %d from LIO"

drivers/target/iscsi/iscsi_target_nego.c

876

pr_err("Initiator has already been"

drivers/target/iscsi/iscsi_target_nego.c

886

pr_err("Initiator sent zero length security payload,"

drivers/target/iscsi/iscsi_target_nego.c

91

pr_err("Length of input: %d exceeds max_length:"

drivers/target/iscsi/iscsi_target_nego.c

912

pr_err("Initiator sent AuthMethod=None but"

drivers/target/iscsi/iscsi_target_nego.c

998

pr_err("Initiator is requesting CSG: 1, has not been"

drivers/target/iscsi/iscsi_target_nodeattrib.c

107

pr_err("Requested NopIn Timeout %u larger than maximum"

drivers/target/iscsi/iscsi_target_nodeattrib.c

112

pr_err("Requested NopIn Timeout %u smaller than"

drivers/target/iscsi/iscsi_target_nodeattrib.c

157

pr_err("Requested NopIn Response Timeout %u larger"

drivers/target/iscsi/iscsi_target_nodeattrib.c

162

pr_err("Requested NopIn Response Timeout %u smaller"

drivers/target/iscsi/iscsi_target_nodeattrib.c

183

pr_err("Requested Random DataIN PDU Offsets: %u not"

drivers/target/iscsi/iscsi_target_nodeattrib.c

203

pr_err("Requested Random DataIN Sequence Offsets: %u"

drivers/target/iscsi/iscsi_target_nodeattrib.c

223

pr_err("Requested Random R2T Offsets: %u not"

drivers/target/iscsi/iscsi_target_nodeattrib.c

243

pr_err("Requested default ERL: %u not 0, 1, or 2\n",

drivers/target/iscsi/iscsi_target_nodeattrib.c

51

pr_err("Requested DataOut Timeout %u larger than"

drivers/target/iscsi/iscsi_target_nodeattrib.c

56

pr_err("Requested DataOut Timeout %u smaller than"

drivers/target/iscsi/iscsi_target_nodeattrib.c

76

pr_err("Requested DataOut Timeout Retries %u larger"

drivers/target/iscsi/iscsi_target_nodeattrib.c

81

pr_err("Requested DataOut Timeout Retries %u smaller"

drivers/target/iscsi/iscsi_target_parameters.c

1017

pr_err("Proposer's value list \"%s\" contains"

drivers/target/iscsi/iscsi_target_parameters.c

1036

pr_err("Received key \"%s\" twice, protocol error.\n",

drivers/target/iscsi/iscsi_target_parameters.c

1046

pr_err("Illegal \",\" in response for \"%s\".\n",

drivers/target/iscsi/iscsi_target_parameters.c

1076

pr_err("Received %s=%s\n", param->name, value);

drivers/target/iscsi/iscsi_target_parameters.c

1086

pr_err("Received illegal offer %s=%s\n",

drivers/target/iscsi/iscsi_target_parameters.c

1092

pr_err("Standard iSCSI key \"%s\" cannot be answered"

drivers/target/iscsi/iscsi_target_parameters.c

1102

pr_err("Detected value separator \",\", but"

drivers/target/iscsi/iscsi_target_parameters.c

1111

pr_err("Value for key \"%s\" exceeds %d,"

drivers/target/iscsi/iscsi_target_parameters.c

1127

pr_err("Huh? 0x%02x\n", param->type);

drivers/target/iscsi/iscsi_target_parameters.c

1148

pr_err("Length of key name \"%s\" exceeds %d.\n",

drivers/target/iscsi/iscsi_target_parameters.c

1158

pr_err("Key \"%s\" may not be sent to %s,"

drivers/target/iscsi/iscsi_target_parameters.c

1165

pr_err("Key \"%s\" may not be sent to %s,"

drivers/target/iscsi/iscsi_target_parameters.c

1185

pr_err("Length of key name \"%s\" exceeds %d.\n",

drivers/target/iscsi/iscsi_target_parameters.c

1195

pr_err("Key \"%s\" may not be sent to %s,"

drivers/target/iscsi/iscsi_target_parameters.c

1201

pr_err("Key \"%s\" may not be sent to %s,"

drivers/target/iscsi/iscsi_target_parameters.c

1208

pr_err("Key \"%s\" received twice, protocol error.\n",

drivers/target/iscsi/iscsi_target_parameters.c

1229

pr_err("Key \"%s\" may not be negotiated during %s phase.\n",

drivers/target/iscsi/iscsi_target_parameters.c

128

pr_err("Unknown type_range 0x%02x\n",

drivers/target/iscsi/iscsi_target_parameters.c

1316

pr_err("Unable to allocate %u + 1 bytes for tmpbuf.\n", length);

drivers/target/iscsi/iscsi_target_parameters.c

1445

pr_err("No response for proposed key \"%s\".\n",

drivers/target/iscsi/iscsi_target_parameters.c

153

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_parameters.c

31

pr_err("rx_data returned %d, expecting %d.\n",

drivers/target/iscsi/iscsi_target_parameters.c

524

pr_err("Unable to allocate memory for struct iscsi_param_list.\n");

drivers/target/iscsi/iscsi_target_parameters.c

540

pr_err("Unable to allocate memory for struct iscsi_param.\n");

drivers/target/iscsi/iscsi_target_parameters.c

550

pr_err("Unable to allocate memory for parameter name/value.\n");

drivers/target/iscsi/iscsi_target_parameters.c

568

pr_err("No parameters allocated.\n");

drivers/target/iscsi/iscsi_target_parameters.c

615

pr_err("Key or parameter list pointer is NULL.\n");

drivers/target/iscsi/iscsi_target_parameters.c

62

pr_err("tx_data returned %d, expecting %d.\n",

drivers/target/iscsi/iscsi_target_parameters.c

624

pr_err("Unable to locate key \"%s\".\n", key);

drivers/target/iscsi/iscsi_target_parameters.c

633

pr_err("Unable to locate \"=\" separator for key,"

drivers/target/iscsi/iscsi_target_parameters.c

651

pr_err("Unable to allocate memory for value.\n");

drivers/target/iscsi/iscsi_target_parameters.c

668

pr_err("Value for notunderstood key \"%s\" exceeds %d,"

drivers/target/iscsi/iscsi_target_parameters.c

675

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_parameters.c

753

pr_err("Illegal value for \"%s\", must be either"

drivers/target/iscsi/iscsi_target_parameters.c

770

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

778

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

78

pr_err("Unable to allocate memory for parameter.\n");

drivers/target/iscsi/iscsi_target_parameters.c

786

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

794

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

802

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

810

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

818

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

837

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

846

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

85

pr_err("Unable to allocate memory for parameter name.\n");

drivers/target/iscsi/iscsi_target_parameters.c

854

pr_err("Illegal value for \"%s\", must be"

drivers/target/iscsi/iscsi_target_parameters.c

91

pr_err("Unable to allocate memory for parameter value.\n");

drivers/target/iscsi/iscsi_target_parameters.c

916

pr_err("Received key \"%s\" twice, protocol error.\n",

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

134

pr_err("Unable to allocate memory"

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

154

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

186

pr_err("Unable to allocate memory for random array.\n");

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

540

pr_err("Unable to allocate struct iscsi_seq list\n");

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

550

pr_err("Unable to allocate struct iscsi_pdu list.\n");

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

570

pr_err("struct iscsit_cmd->pdu_list is NULL!\n");

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

580

pr_err("Unable to locate PDU holder for ITT: 0x%08x, Offset:"

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

594

pr_err("struct iscsit_cmd->pdu_list is NULL!\n");

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

622

pr_err("Command ITT: 0x%08x unable to locate"

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

628

pr_err("struct iscsi_seq is NULL!\n");

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

639

pr_err("Command ITT: 0x%08x seq->pdu_send"

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

653

pr_err("Command ITT: 0x%08x unable to locate iscsi"

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

670

pr_err("struct iscsit_cmd->seq_list is NULL!\n");

drivers/target/iscsi/iscsi_target_seq_pdu_list.c

686

pr_err("Unable to locate Sequence holder for ITT: 0x%08x,"

drivers/target/iscsi/iscsi_target_tmr.c

123

pr_err("TMR TASK_REASSIGN not supported in ERL<2,"

drivers/target/iscsi/iscsi_target_tmr.c

130

pr_err("Command ITT: 0x%08x is still alligent to CID:"

drivers/target/iscsi/iscsi_target_tmr.c

134

pr_err("Unable to locate RefTaskTag: 0x%08x in"

drivers/target/iscsi/iscsi_target_tmr.c

144

pr_err("Unable to perform connection recovery for"

drivers/target/iscsi/iscsi_target_tmr.c

151

pr_err("Unable to perform connection recovery for"

drivers/target/iscsi/iscsi_target_tmr.c

159

pr_err("Unable to perform connection recovery for"

drivers/target/iscsi/iscsi_target_tmr.c

203

pr_err("struct iscsi_conn_recovery pointer for ITT: 0x%08x"

drivers/target/iscsi/iscsi_target_tmr.c

327

pr_err("READ ITT: 0x%08x: t_state: %d, never returned"

drivers/target/iscsi/iscsi_target_tmr.c

371

pr_err("struct iscsi_conn_recovery pointer for ITT: 0x%08x"

drivers/target/iscsi/iscsi_target_tmr.c

404

pr_err("Unknown cmd->data_direction: 0x%02x\n",

drivers/target/iscsi/iscsi_target_tmr.c

42

pr_err("Unable to locate RefTaskTag: 0x%08x on CID:"

drivers/target/iscsi/iscsi_target_tmr.c

420

pr_err("TMR Request is missing a RefCmd struct iscsit_cmd.\n");

drivers/target/iscsi/iscsi_target_tmr.c

435

pr_err("Illegal iSCSI Opcode 0x%02x during"

drivers/target/iscsi/iscsi_target_tmr.c

49

pr_err("RefCmdSN 0x%08x does not equal"

drivers/target/iscsi/iscsi_target_tmr.c

731

pr_err("Initiator is requesting R2Ts from"

drivers/target/iscsi/iscsi_target_tmr.c

74

pr_err("TMR Opcode TARGET_WARM_RESET authorization"

drivers/target/iscsi/iscsi_target_tmr.c

803

pr_err("Received ExpDataSN: 0x%08x for READ"

drivers/target/iscsi/iscsi_target_tmr.c

811

pr_err("Received ExpDataSN: 0x%08x for READ"

drivers/target/iscsi/iscsi_target_tmr.c

829

pr_err("Received ExpDataSN: 0x%08x for WRITE"

drivers/target/iscsi/iscsi_target_tmr.c

838

pr_err("Unknown iSCSI data_direction: 0x%02x\n",

drivers/target/iscsi/iscsi_target_tmr.c

94

pr_err("TMR Opcode TARGET_COLD_RESET authorization"

drivers/target/iscsi/iscsi_target_tpg.c

175

pr_err("struct iscsi_tpg_np->tpg_np is NULL!\n");

drivers/target/iscsi/iscsi_target_tpg.c

193

pr_err("struct iscsi_tpg_np->tpg_np is NULL!\n");

drivers/target/iscsi/iscsi_target_tpg.c

225

pr_err("Unable to add iSCSI Target Portal Group: %d"

drivers/target/iscsi/iscsi_target_tpg.c

268

pr_err("Unable to delete iSCSI Target Portal Group:"

drivers/target/iscsi/iscsi_target_tpg.c

305

pr_err("iSCSI target portal group: %hu is already"

drivers/target/iscsi/iscsi_target_tpg.c

31

pr_err("Unable to allocate struct iscsi_portal_group\n");

drivers/target/iscsi/iscsi_target_tpg.c

353

pr_err("iSCSI Target Portal Group: %hu is already"

drivers/target/iscsi/iscsi_target_tpg.c

367

pr_err("Unable to disable iSCSI Target Portal Group:"

drivers/target/iscsi/iscsi_target_tpg.c

460

pr_err("Network Portal: %pISc already exists on a"

drivers/target/iscsi/iscsi_target_tpg.c

469

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_tpg.c

541

pr_err("Unable to locate struct iscsi_np from"

drivers/target/iscsi/iscsi_target_tpg.c

557

pr_err("iscsit_tpg_del_network_portal()"

drivers/target/iscsi/iscsi_target_tpg.c

58

pr_err("Unable to allocate struct iscsi_portal_group\n");

drivers/target/iscsi/iscsi_target_tpg.c

588

pr_err("Illegal value for authentication parameter:"

drivers/target/iscsi/iscsi_target_tpg.c

647

pr_err("Requested Login Timeout %u larger than maximum"

drivers/target/iscsi/iscsi_target_tpg.c

651

pr_err("Requested Logout Timeout %u smaller than"

drivers/target/iscsi/iscsi_target_tpg.c

670

pr_err("Illegal value %d\n", flag);

drivers/target/iscsi/iscsi_target_tpg.c

694

pr_err("Requested Default Queue Depth: %u larger"

drivers/target/iscsi/iscsi_target_tpg.c

699

pr_err("Requested Default Queue Depth: %u smaller"

drivers/target/iscsi/iscsi_target_tpg.c

719

pr_err("Illegal value %d\n", flag);

drivers/target/iscsi/iscsi_target_tpg.c

744

pr_err("Illegal value %d\n", flag);

drivers/target/iscsi/iscsi_target_tpg.c

762

pr_err("Illegal value %d\n", flag);

drivers/target/iscsi/iscsi_target_tpg.c

781

pr_err("Illegal value %d\n", flag);

drivers/target/iscsi/iscsi_target_tpg.c

800

pr_err("Illegal value for default_erl: %u\n", default_erl);

drivers/target/iscsi/iscsi_target_tpg.c

817

pr_err("Illegal value %d\n", flag);

drivers/target/iscsi/iscsi_target_tpg.c

836

pr_err("Illegal value for fabric_prot_type: %u\n", prot_type);

drivers/target/iscsi/iscsi_target_tpg.c

854

pr_err("Illegal value %d\n", flag);

drivers/target/iscsi/iscsi_target_tpg.c

872

pr_err("Illegal value %d\n", flag);

drivers/target/iscsi/iscsi_target_util.c

102

pr_err("Unable to locate next R2T to send for ITT:"

drivers/target/iscsi/iscsi_target_util.c

1080

pr_err("tx_data() returned -EAGAIN\n");

drivers/target/iscsi/iscsi_target_util.c

1113

pr_err("tx_data() returned -EAGAIN\n");

drivers/target/iscsi/iscsi_target_util.c

1147

pr_err("sendmsg/splice returned -EAGAIN\n");

drivers/target/iscsi/iscsi_target_util.c

1151

pr_err("sendmsg/splice failure: %d\n", tx_sent);

drivers/target/iscsi/iscsi_target_util.c

1167

pr_err("tx_data() returned -EAGAIN\n");

drivers/target/iscsi/iscsi_target_util.c

1181

pr_err("tx_data() returned -EAGAIN\n");

drivers/target/iscsi/iscsi_target_util.c

1261

pr_err("Data length is: %d\n", data);

drivers/target/iscsi/iscsi_target_util.c

207

pr_err("struct iscsit_cmd->seq_list is NULL!\n");

drivers/target/iscsi/iscsi_target_util.c

254

pr_err("Received CmdSN: 0x%08x is greater than"

drivers/target/iscsi/iscsi_target_util.c

272

pr_err("Received CmdSN: 0x%08x is less than"

drivers/target/iscsi/iscsi_target_util.c

351

pr_err("Unable to locate ITT: 0x%08x on CID: %hu",

drivers/target/iscsi/iscsi_target_util.c

375

pr_err("Unable to locate ITT: 0x%08x on CID: %hu,"

drivers/target/iscsi/iscsi_target_util.c

399

pr_err("Unable to locate TTT: 0x%08x on CID: %hu\n",

drivers/target/iscsi/iscsi_target_util.c

465

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_util.c

49

pr_err("Unable to allocate memory for struct iscsi_r2t.\n");

drivers/target/iscsi/iscsi_target_util.c

526

pr_err("ITT: 0x%08x immed_queue_count: %d\n",

drivers/target/iscsi/iscsi_target_util.c

541

pr_err("Unable to allocate memory for"

drivers/target/iscsi/iscsi_target_util.c

603

pr_err("ITT: 0x%08x response_queue_count: %d\n",

drivers/target/iscsi/iscsi_target_util.c

84

pr_err("Unable to locate R2T for Offset: %u, Length:"

drivers/target/iscsi/iscsi_target_util.c

873

pr_err("Did not receive response to NOPIN on CID: %hu, failing"

drivers/target/loopback/tcm_loop.c

1058

pr_err("Unable to locate prefix for emulated Target Port: %s\n",

drivers/target/loopback/tcm_loop.c

1067

pr_err("Emulated NAA %s Address: %s, exceeds max: %d\n",

drivers/target/loopback/tcm_loop.c

205

pr_err("Unable to perform device reset without active I_T Nexus\n");

drivers/target/loopback/tcm_loop.c

295

pr_err("Unable to perform device reset without active I_T Nexus\n");

drivers/target/loopback/tcm_loop.c

365

pr_err("Unable to allocate struct scsi_host\n");

drivers/target/loopback/tcm_loop.c

394

pr_err("%s: scsi_add_host failed\n", __func__);

drivers/target/loopback/tcm_loop.c

434

pr_err("device_register() failed for tl_hba->dev: %d\n", ret);

drivers/target/loopback/tcm_loop.c

452

pr_err("Unable to allocate tcm_loop_primary\n");

drivers/target/loopback/tcm_loop.c

458

pr_err("bus_register() failed for tcm_loop_lld_bus\n");

drivers/target/loopback/tcm_loop.c

464

pr_err("driver_register() failed for tcm_loop_driverfs\n");

drivers/target/loopback/tcm_loop.c

655

pr_err("Unable to locate struct scsi_device for %d:%d:%llu\n",

drivers/target/loopback/tcm_loop.c

692

pr_err("kstrtoul() returned %d for fabric_prot_type\n", ret);

drivers/target/loopback/tcm_loop.c

696

pr_err("Invalid qla2xxx fabric_prot_type: %lu\n", val);

drivers/target/loopback/tcm_loop.c

769

pr_err("Unable to remove TCM_Loop I_T Nexus with active TPG port count: %d\n",

drivers/target/loopback/tcm_loop.c

828

pr_err("Emulated NAA Sas Address: %s, exceeds max: %d\n",

drivers/target/loopback/tcm_loop.c

837

pr_err("Passed SAS Initiator Port %s does not match target port protoid: %s\n",

drivers/target/loopback/tcm_loop.c

847

pr_err("Passed FCP Initiator Port %s does not match target port protoid: %s\n",

drivers/target/loopback/tcm_loop.c

857

pr_err("Passed iSCSI Initiator Port %s does not match target port protoid: %s\n",

drivers/target/loopback/tcm_loop.c

864

pr_err("Unable to locate prefix for emulated Initiator Port: %s\n",

drivers/target/loopback/tcm_loop.c

968

pr_err("Unable to locate \"tpgt_#\" directory group\n");

drivers/target/loopback/tcm_loop.c

975

pr_err("Passed tpgt: %lu exceeds TL_TPGS_PER_HBA: %u\n",

drivers/target/sbp/sbp_target.c

1262

pr_err("sbp_run_transaction: page size ignored\n");

drivers/target/sbp/sbp_target.c

1376

pr_err("sbp_send_sense: unknown sense format: 0x%x\n",

drivers/target/sbp/sbp_target.c

1474

pr_err("mgt_orb bad request\n");

drivers/target/sbp/sbp_target.c

1953

pr_err("unlink LUN: failed to update unit directory\n");

drivers/target/sbp/sbp_target.c

1972

pr_err("Only one TPG per Unit is possible.\n");

drivers/target/sbp/sbp_target.c

203

pr_err("failed to init se_session\n");

drivers/target/sbp/sbp_target.c

2084

pr_err("Cannot change the directory_id on an active target.\n");

drivers/target/sbp/sbp_target.c

2110

pr_err("Cannot enable a target with no LUNs!\n");

drivers/target/sbp/sbp_target.c

2127

pr_err("Could not update Config ROM\n");

drivers/target/sbp/sbp_target.c

396

pr_err("failed to allocate login descriptor\n");

drivers/target/sbp/sbp_target.c

415

pr_err("failed to map command block handler: %d\n", ret);

drivers/target/sbp/sbp_target.c

433

pr_err("failed to allocate login response block\n");

drivers/target/sbp/sbp_target.c

514

pr_err("mgt_agent RECONNECT unknown login ID\n");

drivers/target/sbp/sbp_target.c

523

pr_err("mgt_agent RECONNECT login GUID doesn't match\n");

drivers/target/target_core_alua.c

1179

pr_err("Unable to allocate buf for ALUA metadata\n");

drivers/target/target_core_alua.c

1227

pr_err("Unable to complete secondary state"

drivers/target/target_core_alua.c

1275

pr_err("Unable to allocate struct t10_alua_lba_map\n");

drivers/target/target_core_alua.c

1295

pr_err("Duplicate pg_id %d in lba_map\n", pg_id);

drivers/target/target_core_alua.c

1302

pr_err("Unable to allocate struct t10_alua_lba_map_mem\n");

drivers/target/target_core_alua.c

1375

pr_err("Unable to allocate struct t10_alua_lu_gp\n");

drivers/target/target_core_alua.c

1407

pr_err("Maximum ALUA alua_lu_gps_count:"

drivers/target/target_core_alua.c

1446

pr_err("Unable to allocate struct t10_alua_lu_gp_member\n");

drivers/target/target_core_alua.c

1612

pr_err("Unable to allocate struct t10_alua_tg_pt_gp\n");

drivers/target/target_core_alua.c

1675

pr_err("Maximum ALUA alua_tg_pt_gps_count:"

drivers/target/target_core_alua.c

1690

pr_err("ALUA Target Port Group ID: %hu already"

drivers/target/target_core_alua.c

1915

pr_err("ALUA Target Port Group alias too large!\n");

drivers/target/target_core_alua.c

2006

pr_err("Unable to extract alua_access_type\n");

drivers/target/target_core_alua.c

2010

pr_err("Illegal value for alua_access_type:"

drivers/target/target_core_alua.c

2044

pr_err("Unable to extract nonop_delay_msecs\n");

drivers/target/target_core_alua.c

2048

pr_err("Passed nonop_delay_msecs: %lu, exceeds"

drivers/target/target_core_alua.c

2075

pr_err("Unable to extract trans_delay_msecs\n");

drivers/target/target_core_alua.c

2079

pr_err("Passed trans_delay_msecs: %lu, exceeds"

drivers/target/target_core_alua.c

2106

pr_err("Unable to extract implicit_trans_secs\n");

drivers/target/target_core_alua.c

2110

pr_err("Passed implicit_trans_secs: %lu, exceeds"

drivers/target/target_core_alua.c

2137

pr_err("Unable to extract preferred ALUA value\n");

drivers/target/target_core_alua.c

2141

pr_err("Illegal value for preferred ALUA: %lu\n", tmp);

drivers/target/target_core_alua.c

2174

pr_err("Unable to extract alua_tg_pt_offline value\n");

drivers/target/target_core_alua.c

2178

pr_err("Illegal value for alua_tg_pt_offline: %lu\n",

drivers/target/target_core_alua.c

2207

pr_err("Unable to extract alua_tg_pt_status\n");

drivers/target/target_core_alua.c

2213

pr_err("Illegal value for alua_tg_pt_status: %lu\n",

drivers/target/target_core_alua.c

2239

pr_err("Unable to extract alua_tg_pt_write_md\n");

drivers/target/target_core_alua.c

2243

pr_err("Illegal value for alua_tg_pt_write_md:"

drivers/target/target_core_alua.c

302

pr_err("Unable to access l_lun->tg_pt_gp\n");

drivers/target/target_core_alua.c

710

pr_err("Unknown ALUA access state: 0x%02x\n",

drivers/target/target_core_alua.c

779

pr_err("Unknown ALUA access state: 0x%02x\n", state);

drivers/target/target_core_alua.c

786

pr_err("ALUA access state %s not supported",

drivers/target/target_core_alua.c

864

pr_err("filp_open(%s) for ALUA metadata failed\n", path);

drivers/target/target_core_alua.c

869

pr_err("Error writing ALUA metadata file: %s\n", path);

drivers/target/target_core_alua.c

886

pr_err("Unable to allocate buf for ALUA metadata\n");

drivers/target/target_core_configfs.c

1034

pr_err("dev[%p]: Unable to change SE Device"

drivers/target/target_core_configfs.c

1070

pr_err("dev[%p]: Unable to change SE Device TCQ while"

drivers/target/target_core_configfs.c

1076

pr_err("dev[%p]: Illegal ZERO value for queue_depth\n", dev);

drivers/target/target_core_configfs.c

1082

pr_err("dev[%p]: Passed queue_depth:"

drivers/target/target_core_configfs.c

1106

pr_err("dev[%p]: Unable to change SE Device"

drivers/target/target_core_configfs.c

1112

pr_err("dev[%p]: Passed optimal_sectors %u cannot be"

drivers/target/target_core_configfs.c

1136

pr_err("dev[%p]: Unable to change SE Device block_size"

drivers/target/target_core_configfs.c

1143

pr_err("dev[%p]: Illegal value for block_device: %u"

drivers/target/target_core_configfs.c

116

pr_err("db_root: cannot be changed because it's in use\n");

drivers/target/target_core_configfs.c

1183

pr_err("dev[%p]: Unable to change SE Device alua_support:"

drivers/target/target_core_configfs.c

121

pr_err("db_root: count %d exceeds DB_ROOT_LEN-1: %u\n",

drivers/target/target_core_configfs.c

1222

pr_err("dev[%p]: Unable to change SE Device pgr_support:"

drivers/target/target_core_configfs.c

136

pr_err("db_root: cannot open: %s\n", db_root_stage);

drivers/target/target_core_configfs.c

138

pr_err("db_root: not a directory: %s\n", db_root_stage);

drivers/target/target_core_configfs.c

1418

pr_err("Emulated T10 Inquiry Data contains non-ASCII-printable characters\n");

drivers/target/target_core_configfs.c

1453

pr_err("Emulated T10 Vendor Identification exceeds"

drivers/target/target_core_configfs.c

1471

pr_err("Unable to set T10 Vendor Identification while"

drivers/target/target_core_configfs.c

1509

pr_err("Emulated T10 Vendor exceeds INQUIRY_MODEL_LEN: "

drivers/target/target_core_configfs.c

1527

pr_err("Unable to set T10 Model while active %d exports exist\n",

drivers/target/target_core_configfs.c

1565

pr_err("Emulated T10 Revision exceeds INQUIRY_REVISION_LEN: "

drivers/target/target_core_configfs.c

1583

pr_err("Unable to set T10 Revision while active %d exports exist\n",

drivers/target/target_core_configfs.c

1632

pr_err("Unable to set Company ID while %u exports exist\n",

drivers/target/target_core_configfs.c

1673

pr_err("Underlying SCSI device firmware provided VPD"

drivers/target/target_core_configfs.c

1679

pr_err("Emulated VPD Unit Serial exceeds"

drivers/target/target_core_configfs.c

1690

pr_err("Unable to set VPD Unit Serial while"

drivers/target/target_core_configfs.c

1764

pr_err("Unable to set the peripheral device text id info while active %d exports exist\n",

drivers/target/target_core_configfs.c

1775

pr_err("Emulated peripheral device text id info exceeds PD_TEXT_ID_INFO_LEN: " __stringify(PD_TEXT_ID_INFO_LEN "\n"));

drivers/target/target_core_configfs.c

2171

pr_err("APTPL metadata initiator_node="

drivers/target/target_core_configfs.c

2185

pr_err("APTPL metadata initiator_isid"

drivers/target/target_core_configfs.c

2195

pr_err("kstrtoull() failed for sa_res_key=\n");

drivers/target/target_core_configfs.c

2249

pr_err("APTPL metadata target_node="

drivers/target/target_core_configfs.c

2279

pr_err("Illegal parameters for APTPL registration\n");

drivers/target/target_core_configfs.c

2285

pr_err("Illegal PR type: 0x%02x for reservation"

drivers/target/target_core_configfs.c

2378

pr_err("alias count: %d exceeds"

drivers/target/target_core_configfs.c

2418

pr_err("udev_path count: %d exceeds"

drivers/target/target_core_configfs.c

2457

pr_err("For dev_enable ops, only valid value"

drivers/target/target_core_configfs.c

2507

pr_err("ALUA LU Group Alias too large!\n");

drivers/target/target_core_configfs.c

2641

pr_err("Invalid line %d\n", num);

drivers/target/target_core_configfs.c

2649

pr_err("Invalid line %d\n", num);

drivers/target/target_core_configfs.c

2655

pr_err("Invalid line %d, missing end lba\n", num);

drivers/target/target_core_configfs.c

2662

pr_err("Invalid line %d, missing state definitions\n",

drivers/target/target_core_configfs.c

2690

pr_err("Invalid ALUA state '%c'\n", state);

drivers/target/target_core_configfs.c

2698

pr_err("Invalid target descriptor %d:%c "

drivers/target/target_core_configfs.c

2713

pr_err("Only %d from %d port groups definitions "

drivers/target/target_core_configfs.c

2798

pr_err("kstrtoul() returned %d for"

drivers/target/target_core_configfs.c

2803

pr_err("ALUA lu_gp_id: %lu exceeds maximum:"

drivers/target/target_core_configfs.c

2954

pr_err("Unable to do implicit ALUA on invalid tg_pt_gp ID\n");

drivers/target/target_core_configfs.c

2958

pr_err("Unable to set alua_access_state while device is"

drivers/target/target_core_configfs.c

2965

pr_err("Unable to extract new ALUA access state from"

drivers/target/target_core_configfs.c

2972

pr_err("Unable to process implicit configfs ALUA"

drivers/target/target_core_configfs.c

2979

pr_err("Unable to process implicit configfs ALUA transition"

drivers/target/target_core_configfs.c

3005

pr_err("Unable to set ALUA access status on invalid tg_pt_gp ID\n");

drivers/target/target_core_configfs.c

3011

pr_err("Unable to extract new ALUA access status"

drivers/target/target_core_configfs.c

3020

pr_err("Illegal ALUA access status: 0x%02x\n",

drivers/target/target_core_configfs.c

3058

pr_err("Unable to set " #_name " ALUA state on invalid tg_pt_gp ID\n"); \

drivers/target/target_core_configfs.c

3064

pr_err("Invalid value '%s', must be '0' or '1'\n", p); \

drivers/target/target_core_configfs.c

3068

pr_err("Invalid value '%ld', must be '0' or '1'\n", tmp); \

drivers/target/target_core_configfs.c

3103

pr_err("Unable to extract alua_write_metadata\n");

drivers/target/target_core_configfs.c

3108

pr_err("Illegal value for alua_write_metadata:"

drivers/target/target_core_configfs.c

3188

pr_err("ALUA tg_pt_gp_id: invalid value '%s' for tg_pt_gp_id\n",

drivers/target/target_core_configfs.c

3193

pr_err("ALUA tg_pt_gp_id: %lu exceeds maximum: 0x0000ffff\n",

drivers/target/target_core_configfs.c

3559

pr_err("Unable to extract hba mode flag: %d\n", ret);

drivers/target/target_core_configfs.c

3564

pr_err("Unable to set hba_mode with active devices\n");

drivers/target/target_core_configfs.c

3617

pr_err("Passed *name strlen(): %d exceeds"

drivers/target/target_core_configfs.c

3626

pr_err("Unable to locate \"_\" for $SUBSYSTEM_PLUGIN_$HOST_ID\n");

drivers/target/target_core_configfs.c

363

pr_err("Passed alias: %s exceeds "

drivers/target/target_core_configfs.c

3646

pr_err("kstrtoul() returned %d for"

drivers/target/target_core_configfs.c

369

pr_err("Missing tfo->fabric_name\n");

drivers/target/target_core_configfs.c

3708

pr_err("db_root: cannot open: %s\n", db_root_stage);

drivers/target/target_core_configfs.c

3713

pr_err("db_root: not a valid directory: %s\n", db_root_stage);

drivers/target/target_core_configfs.c

373

pr_err("Passed name: %s exceeds "

drivers/target/target_core_configfs.c

378

pr_err("Missing tfo->tpg_get_wwn()\n");

drivers/target/target_core_configfs.c

3780

pr_err("Error %d while registering subsystem %s\n",

drivers/target/target_core_configfs.c

382

pr_err("Missing tfo->tpg_get_tag()\n");

drivers/target/target_core_configfs.c

386

pr_err("Missing tfo->release_cmd()\n");

drivers/target/target_core_configfs.c

390

pr_err("Missing tfo->write_pending()\n");

drivers/target/target_core_configfs.c

394

pr_err("Missing tfo->queue_data_in()\n");

drivers/target/target_core_configfs.c

398

pr_err("Missing tfo->queue_status()\n");

drivers/target/target_core_configfs.c

402

pr_err("Missing tfo->queue_tm_rsp()\n");

drivers/target/target_core_configfs.c

406

pr_err("Missing tfo->aborted_task()\n");

drivers/target/target_core_configfs.c

410

pr_err("Missing tfo->check_stop_free()\n");

drivers/target/target_core_configfs.c

419

pr_err("Missing tfo->fabric_make_wwn()\n");

drivers/target/target_core_configfs.c

423

pr_err("Missing tfo->fabric_drop_wwn()\n");

drivers/target/target_core_configfs.c

427

pr_err("Missing tfo->fabric_make_tpg()\n");

drivers/target/target_core_configfs.c

431

pr_err("Missing tfo->fabric_drop_tpg()\n");

drivers/target/target_core_configfs.c

477

pr_err("%s: could not allocate memory!\n", __func__);

drivers/target/target_core_configfs.c

483

pr_err("%s: could not allocate memory!\n", __func__);

drivers/target/target_core_configfs.c

667

pr_err("dev[%p]: Unable to change model alias"

drivers/target/target_core_configfs.c

698

pr_err("emulate_write_cache not supported for this device\n");

drivers/target/target_core_configfs.c

722

pr_err("Illegal value %d\n", val);

drivers/target/target_core_configfs.c

727

pr_err("dev[%p]: Unable to change SE Device"

drivers/target/target_core_configfs.c

750

pr_err("dev[%p]: Unable to change SE Device TAS while"

drivers/target/target_core_configfs.c

766

pr_err("Generic Block Discard not supported\n");

drivers/target/target_core_configfs.c

771

pr_err("Generic Block Discard setup for %s requires device to be configured\n",

drivers/target/target_core_configfs.c

777

pr_err("Generic Block Discard setup for %s failed\n",

drivers/target/target_core_configfs.c

854

pr_err("Illegal value %d for pi_prot_type\n", flag);

drivers/target/target_core_configfs.c

858

pr_err("DIF TYPE2 protection currently not supported\n");

drivers/target/target_core_configfs.c

871

pr_err("DIF protection not supported by backend: %s\n",

drivers/target/target_core_configfs.c

876

pr_err("DIF protection requires device to be configured\n");

drivers/target/target_core_configfs.c

880

pr_err("dev[%p]: Unable to change SE Device PROT type while"

drivers/target/target_core_configfs.c

926

pr_err("DIF protection format not supported by backend %s\n",

drivers/target/target_core_configfs.c

931

pr_err("DIF protection format requires device to be configured\n");

drivers/target/target_core_configfs.c

935

pr_err("dev[%p]: Unable to format SE Device PROT type while"

drivers/target/target_core_configfs.c

988

pr_err("dev[%p]: Unable to set force_pr_aptpl while"

drivers/target/target_core_device.c

215

pr_err("%s device entries device pointer is"

drivers/target/target_core_device.c

329

pr_err("Unable to allocate se_dev_entry memory\n");

drivers/target/target_core_device.c

357

pr_err("Existing orig->se_lun doesn't match new lun"

drivers/target/target_core_device.c

589

pr_err("%s InitiatorName exceeds maximum size.\n",

drivers/target/target_core_device.c

596

pr_err("Unable to allocate memory for struct se_lun_acl.\n");

drivers/target/target_core_device.c

69

pr_err("TARGET_CORE[%s]: Detected WRITE_PROTECTED LUN"

drivers/target/target_core_device.c

965

pr_err("se_dev->se_dev_ptr already set for storage"

drivers/target/target_core_device.c

99

pr_err("TARGET_CORE[%s]: Detected NON_EXISTENT_LUN"

drivers/target/target_core_fabric_configfs.c

1056

pr_err("Command completion value must be between %d and %d or an online CPU.\n",

drivers/target/target_core_fabric_configfs.c

108

pr_err("Illegal Initiator ACL SymLink outside of %s\n",

drivers/target/target_core_fabric_configfs.c

1110

pr_err("tf->tf_ops.fabric_make_wwn is NULL\n");

drivers/target/target_core_fabric_configfs.c

113

pr_err("Illegal Initiator ACL Symlink outside of %s"

drivers/target/target_core_fabric_configfs.c

280

pr_err("Unable to allocate memory for name buf\n");

drivers/target/target_core_fabric_configfs.c

288

pr_err("Unable to locate \"lun_\" from buf: %s"

drivers/target/target_core_fabric_configfs.c

477

pr_err("tf->tf_ops.fabric_make_np is NULL\n");

drivers/target/target_core_fabric_configfs.c

634

pr_err("Bad se_dev_ci, not a valid se_dev_ci pointer: %p\n", se_dev_ci);

drivers/target/target_core_fabric_configfs.c

640

pr_err("se_device not configured yet, cannot port link\n");

drivers/target/target_core_fabric_configfs.c

650

pr_err("Port Symlink already exists\n");

drivers/target/target_core_fabric_configfs.c

656

pr_err("core_dev_add_lun() failed: %d\n", ret);

drivers/target/target_core_fabric_configfs.c

752

pr_err("Unable to locate \'_\" in"

drivers/target/target_core_fabric_configfs.c

80

pr_err("Bad lun_ci, not a valid lun_ci pointer: %p\n", lun_ci);

drivers/target/target_core_fabric_configfs.c

89

pr_err("Source se_lun->lun_se_dev does not exist\n");

drivers/target/target_core_fabric_configfs.c

93

pr_err("Unable to create mappedlun symlink because"

drivers/target/target_core_fabric_configfs.c

935

pr_err("tf->tf_ops->fabric_make_tpg is NULL\n");

drivers/target/target_core_fabric_lib.c

314

pr_err("Illegal format code: 0x%02x for iSCSI"

drivers/target/target_core_fabric_lib.c

337

pr_err("Unable to locate \",i,0x\" separator"

drivers/target/target_core_fabric_lib.c

389

pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id);

drivers/target/target_core_fabric_lib.c

417

pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id);

drivers/target/target_core_fabric_lib.c

446

pr_err("Unknown proto_id: 0x%02x\n", tpg->proto_id);

drivers/target/target_core_file.c

116

pr_err("Missing fd_dev_name=\n");

drivers/target/target_core_file.c

142

pr_err("filp_open(%s) failed\n", fd_dev->fd_dev_name);

drivers/target/target_core_file.c

180

pr_err("FILEIO: Missing fd_dev_size="

drivers/target/target_core_file.c

325

pr_err("Unable to allocate fd_do_readv iov[]\n");

drivers/target/target_core_file.c

342

pr_err("%s() write returned %d\n", __func__, ret);

drivers/target/target_core_file.c

354

pr_err("%s() returned %d, expecting %u for "

drivers/target/target_core_file.c

362

pr_err("%s() returned %d for non S_ISBLK\n",

drivers/target/target_core_file.c

414

pr_err("FILEIO: vfs_fsync_range() failed: %d\n", ret);

drivers/target/target_core_file.c

43

pr_err("Unable to allocate memory for struct fd_host\n");

drivers/target/target_core_file.c

440

pr_err("WRITE_SAME: Protection information with FILEIO"

drivers/target/target_core_file.c

450

pr_err("WRITE_SAME: Illegal SGL t_data_nents: %u length: %u"

drivers/target/target_core_file.c

474

pr_err("vfs_iter_write() returned %zd for write same\n", ret);

drivers/target/target_core_file.c

492

pr_err("Unable to locate fd_dev->fd_prot_file\n");

drivers/target/target_core_file.c

504

pr_err("vfs_write to prot file failed: %zd\n", ret);

drivers/target/target_core_file.c

521

pr_err("Unable to allocate FILEIO prot buf\n");

drivers/target/target_core_file.c

679

pr_err("FILEIO: Not able to process I/O of %u bytes due to"

drivers/target/target_core_file.c

742

pr_err("kstrtoull() failed for"

drivers/target/target_core_file.c

755

pr_err("bogus fd_buffered_io=%d value\n", arg);

drivers/target/target_core_file.c

770

pr_err("bogus fd_async_io=%d value\n", arg);

drivers/target/target_core_file.c

78

pr_err("Unable to allocate memory for struct fd_dev\n");

drivers/target/target_core_file.c

833

pr_err("Unable to locate fd_dev->fd_file\n");

drivers/target/target_core_file.c

839

pr_err("FILEIO Protection emulation only supported on"

drivers/target/target_core_file.c

852

pr_err("filp_open(%s) failed\n", buf);

drivers/target/target_core_file.c

868

pr_err("Unable to format_prot while pi_prot_type == 0\n");

drivers/target/target_core_file.c

874

pr_err("Unable to allocate FILEIO prot buf\n");

drivers/target/target_core_hba.c

116

pr_err("Unable to allocate struct se_hba\n");

drivers/target/target_core_hba.c

50

pr_err("backend %s already registered.\n", ops->name);

drivers/target/target_core_iblock.c

103

pr_err("Missing udev_path= parameters for IBLOCK\n");

drivers/target/target_core_iblock.c

1060

pr_err("Block device does not support pr_ops but iblock device has been configured for PR passthrough.\n");

drivers/target/target_core_iblock.c

1065

pr_err("Block device does not support read_keys.\n");

drivers/target/target_core_iblock.c

109

pr_err("IBLOCK: Unable to create bioset\n");

drivers/target/target_core_iblock.c

1107

pr_err("Unknown PERSISTENT_RESERVE_IN SA: 0x%02x\n", sa);

drivers/target/target_core_iblock.c

162

pr_err("IBLOCK export of blk_integrity: %s not supported\n",

drivers/target/target_core_iblock.c

341

pr_err("bio error: %p, err: %d\n", bio, bio->bi_status);

drivers/target/target_core_iblock.c

367

pr_err("Unable to allocate memory for bio\n");

drivers/target/target_core_iblock.c

397

pr_err("IBLOCK: cache flush failed: %d\n", bio->bi_status);

drivers/target/target_core_iblock.c

448

pr_err("blkdev_issue_discard() failed: %d\n", ret);

drivers/target/target_core_iblock.c

502

pr_err("WRITE_SAME: Protection information with IBLOCK"

drivers/target/target_core_iblock.c

514

pr_err("WRITE_SAME: Illegal SGL t_data_nents: %u length: %u"

drivers/target/target_core_iblock.c

603

pr_err("Unable to set udev_path= while"

drivers/target/target_core_iblock.c

626

pr_err("kstrtoul() failed for"

drivers/target/target_core_iblock.c

64

pr_err("Unable to allocate struct iblock_dev\n");

drivers/target/target_core_iblock.c

642

pr_err("kstrtoul() failed for exclusive=\n");

drivers/target/target_core_iblock.c

700

pr_err("Unable to locate bio_integrity\n");

drivers/target/target_core_iblock.c

706

pr_err("Unable to allocate bio_integrity_payload\n");

drivers/target/target_core_iblock.c

724

pr_err("bio_integrity_add_page() failed; %d\n", rc);

drivers/target/target_core_iblock.c

872

pr_err("Block device does not support pr_ops but iblock device has been configured for PR passthrough.\n");

drivers/target/target_core_iblock.c

880

pr_err("block device does not support pr_register.\n");

drivers/target/target_core_iblock.c

893

pr_err("block_device does not support pr_reserve.\n");

drivers/target/target_core_iblock.c

901

pr_err("block_device does not support pr_clear.\n");

drivers/target/target_core_iblock.c

910

pr_err("block_device does not support pr_preempt.\n");

drivers/target/target_core_iblock.c

920

pr_err("block_device does not support pr_pclear.\n");

drivers/target/target_core_iblock.c

927

pr_err("Unknown PERSISTENT_RESERVE_OUT SA: 0x%02x\n", sa);

drivers/target/target_core_iblock.c

993

pr_err("Block device does not support pr_ops but iblock device has been configured for PR passthrough.\n");

drivers/target/target_core_iblock.c

998

pr_err("Block device does not support read_keys.\n");

drivers/target/target_core_pr.c

1259

pr_err("SPC-3 PR: Unable to perform ALL_TG_PT=1"

drivers/target/target_core_pr.c

1495

pr_err("Unable to allocate tidh_new\n");

drivers/target/target_core_pr.c

1543

pr_err("SPC-3 PR: Illegal tpdl: %u + 28 byte header"

drivers/target/target_core_pr.c

1598

pr_err(" core_scsi3_tpg_depend_item()"

drivers/target/target_core_pr.c

1623

pr_err("configfs_depend_item() failed"

drivers/target/target_core_pr.c

1642

pr_err("SPC-3 PR SPEC_I_PT: Unable to locate"

drivers/target/target_core_pr.c

1654

pr_err("SPC-3 PR SPEC_I_PT: Illegal tid_len:"

drivers/target/target_core_pr.c

1669

pr_err("Unable to locate %s dest_se_deve from destination RTPI: %u\n",

drivers/target/target_core_pr.c

1680

pr_err("core_scsi3_lunacl_depend_item()"

drivers/target/target_core_pr.c

1717

pr_err("Unable to allocate tidh_new\n");

drivers/target/target_core_pr.c

181

pr_err("Received legacy SPC-2 RESERVE/RELEASE"

drivers/target/target_core_pr.c

1917

pr_err("Unable to update renaming APTPL metadata,"

drivers/target/target_core_pr.c

1936

pr_err("Unable to update renaming APTPL metadata,"

drivers/target/target_core_pr.c

1974

pr_err("filp_open(%s) for APTPL metadata"

drivers/target/target_core_pr.c

2027

pr_err("SPC-3 PR: Could not update APTPL\n");

drivers/target/target_core_pr.c

2053

pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n");

drivers/target/target_core_pr.c

2090

pr_err("Unable to allocate"

drivers/target/target_core_pr.c

2114

pr_err("SPC-3 PR REGISTER: Received"

drivers/target/target_core_pr.c

2124

pr_err("SPC-3 PR REGISTER: SPEC_I_PT"

drivers/target/target_core_pr.c

2135

pr_err("SPC-3 PR REGISTER: ALL_TG_PT=1"

drivers/target/target_core_pr.c

2274

pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n");

drivers/target/target_core_pr.c

2283

pr_err("SPC-3 PR: Unable to locate"

drivers/target/target_core_pr.c

2297

pr_err("SPC-3 PR RESERVE: Received res_key: 0x%016Lx"

drivers/target/target_core_pr.c

2314

pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope);

drivers/target/target_core_pr.c

2338

pr_err("SPC-3 PR: Attempted RESERVE from"

drivers/target/target_core_pr.c

2360

pr_err("SPC-3 PR: Attempted RESERVE from"

drivers/target/target_core_pr.c

2429

pr_err("SPC-3 PR: Unknown Service Action RESERVE Type:"

drivers/target/target_core_pr.c

2514

pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n");

drivers/target/target_core_pr.c

252

pr_err("LongIO and Obsolete Bits set, returning ILLEGAL_REQUEST\n");

drivers/target/target_core_pr.c

2522

pr_err("SPC-3 PR: Unable to locate"

drivers/target/target_core_pr.c

2572

pr_err("SPC-3 PR RELEASE: Received res_key: 0x%016Lx"

drivers/target/target_core_pr.c

2588

pr_err("SPC-3 PR RELEASE: Attempted to release"

drivers/target/target_core_pr.c

2675

pr_err("SPC-3 PR: Unable to locate"

drivers/target/target_core_pr.c

2691

pr_err("SPC-3 PR REGISTER: Received"

drivers/target/target_core_pr.c

272

pr_err("SCSI-2 RESERVATION CONFLICT for %s fabric\n",

drivers/target/target_core_pr.c

274

pr_err("Original reserver LUN: %llu %s\n",

drivers/target/target_core_pr.c

277

pr_err("Current attempt - LUN: %llu -> MAPPED LUN: %llu"

drivers/target/target_core_pr.c

2832

pr_err("SPC-3 PR: Unable to locate"

drivers/target/target_core_pr.c

2842

pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope);

drivers/target/target_core_pr.c

3135

pr_err("SPC-3 PR: Unknown Service Action PREEMPT%s"

drivers/target/target_core_pr.c

3166

pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n");

drivers/target/target_core_pr.c

3181

pr_err("SPC-3 PR: Unable to locate PR_REGISTERED"

drivers/target/target_core_pr.c

3223

pr_err("SPC-3 PR: Illegal tid_len: %u + 24 byte header"

drivers/target/target_core_pr.c

3243

pr_err("core_scsi3_tpg_depend_item() failed"

drivers/target/target_core_pr.c

3256

pr_err("SPC-3 PR REGISTER_AND_MOVE: Unable to locate"

drivers/target/target_core_pr.c

3274

pr_err("SPC-3 PR REGISTER_AND_MOVE: Received"

drivers/target/target_core_pr.c

3285

pr_err("SPC-3 PR REGISTER_AND_MOVE: Unable to locate"

drivers/target/target_core_pr.c

3313

pr_err("SPC-3 PR REGISTER_AND_MOVE: TransportID: %s"

drivers/target/target_core_pr.c

3320

pr_err("SPC-3 PR REGISTER_AND_MOVE: TransportID: %s %s"

drivers/target/target_core_pr.c

3339

pr_err("Unable to locate %s dest_node_acl for"

drivers/target/target_core_pr.c

3347

pr_err("core_scsi3_nodeacl_depend_item() for"

drivers/target/target_core_pr.c

3365

pr_err("Unable to locate %s dest_se_deve from RTPI:"

drivers/target/target_core_pr.c

3372

pr_err("core_scsi3_lunacl_depend_item() failed\n");

drivers/target/target_core_pr.c

3552

pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n");

drivers/target/target_core_pr.c

3557

pr_err("SPC-3 PR: Device has been configured for PR passthrough but it's not supported by the backend.\n");

drivers/target/target_core_pr.c

3564

pr_err("SPC-3 PR: PRO_REGISTER_AND_MOVE and PRO_REPLACE_LOST_RESERVATION are not supported by PR passthrough.\n");

drivers/target/target_core_pr.c

3569

pr_err("SPC-3 PR: SPEC_I_PT and ALL_TG_PT are not supported by PR passthrough.\n");

drivers/target/target_core_pr.c

3600

pr_err("Received PERSISTENT_RESERVE CDB while legacy"

drivers/target/target_core_pr.c

3721

pr_err("Unknown PERSISTENT_RESERVE_OUT service"

drivers/target/target_core_pr.c

3746

pr_err("PRIN SA READ_KEYS SCSI Data Length: %u"

drivers/target/target_core_pr.c

3801

pr_err("PRIN SA READ_RESERVATIONS SCSI Data Length: %u"

drivers/target/target_core_pr.c

3877

pr_err("PRIN SA REPORT_CAPABILITIES SCSI Data Length:"

drivers/target/target_core_pr.c

3943

pr_err("PRIN SA READ_FULL_STATUS SCSI Data Length: %u"

drivers/target/target_core_pr.c

4091

pr_err("PRIN SA SCSI Data Length: %u too small\n",

drivers/target/target_core_pr.c

4097

pr_err("SPC-3 PR: Device has been configured for PR passthrough but it's not supported by the backend.\n");

drivers/target/target_core_pr.c

4102

pr_err("SPC-3 PR: PRI_READ_FULL_STATUS is not supported by PR passthrough.\n");

drivers/target/target_core_pr.c

4132

pr_err("Received PERSISTENT_RESERVE CDB while legacy"

drivers/target/target_core_pr.c

4157

pr_err("Unknown PERSISTENT_RESERVE_IN service"

drivers/target/target_core_pr.c

416

pr_err("Unknown PERSISTENT_RESERVE_OUT service"

drivers/target/target_core_pr.c

463

pr_err("Unknown MI Service Action: 0x%02x\n",

drivers/target/target_core_pr.c

631

pr_err("Unable to allocate struct t10_pr_registration\n");

drivers/target/target_core_pr.c

657

pr_err("Unable to locate PR deve %s mapped_lun: %llu\n",

drivers/target/target_core_pr.c

774

pr_err("core_scsi3_lunacl_depend"

drivers/target/target_core_pr.c

838

pr_err("Illegal parameters for APTPL registration\n");

drivers/target/target_core_pr.c

844

pr_err("Unable to allocate struct t10_pr_registration\n");

drivers/target/target_core_pr.c

962

pr_err("Unable to locate PR APTPL %s mapped_lun:"

drivers/target/target_core_pscsi.c

120

pr_err("pSCSI: Unable to locate SCSI Host for"

drivers/target/target_core_pscsi.c

244

pr_err("page_83[3]: identifier"

drivers/target/target_core_pscsi.c

252

pr_err("Unable to allocate memory for"

drivers/target/target_core_pscsi.c

294

pr_err("Set broken SCSI Device %d:%d:%llu"

drivers/target/target_core_pscsi.c

339

pr_err("Unable to allocate memory for struct pscsi_dev_virt\n");

drivers/target/target_core_pscsi.c

360

pr_err("scsi_device_get() failed for %d:%d:%d:%llu\n",

drivers/target/target_core_pscsi.c

373

pr_err("pSCSI: bdev_file_open_by_path() failed\n");

drivers/target/target_core_pscsi.c

403

pr_err("scsi_device_get() failed for %d:%d:%d:%llu\n",

drivers/target/target_core_pscsi.c

435

pr_err("Missing scsi_channel_id=, scsi_target_id= and"

drivers/target/target_core_pscsi.c

446

pr_err("pSCSI: Unable to locate struct"

drivers/target/target_core_pscsi.c

455

pr_err("pSCSI: udev_path attribute has not"

drivers/target/target_core_pscsi.c

466

pr_err("pSCSI: Unable to set hba_mode"

drivers/target/target_core_pscsi.c

480

pr_err("pSCSI: Unable to locate"

drivers/target/target_core_pscsi.c

488

pr_err("pSCSI: PHV_VIRTUAL_HOST_ID set while"

drivers/target/target_core_pscsi.c

529

pr_err("pSCSI: Unable to locate %d:%d:%d:%d\n", sh->host_no,

drivers/target/target_core_pscsi.c

56

pr_err("Unable to allocate struct pscsi_hba_virt\n");

drivers/target/target_core_pscsi.c

652

pr_err("Unable to get buf for scatterlist\n");

drivers/target/target_core_pscsi.c

734

pr_err("PSCSI[%d]: Unable to accept"

drivers/target/target_core_pscsi.c

888

pr_err("pSCSI: failed to append bio\n");

drivers/target/target_core_pscsi.c

902

pr_err("pSCSI: failed to append bio\n");

drivers/target/target_core_rd.c

154

pr_err("Unable to allocate scatterlist"

drivers/target/target_core_rd.c

182

pr_err("Illegal page count: %u for Ramdisk device\n",

drivers/target/target_core_rd.c

352

pr_err("Unable to locate struct rd_dev_sg_table for page: %u\n",

drivers/target/target_core_rd.c

372

pr_err("Unable to locate struct prot rd_dev_sg_table for page: %u\n",

drivers/target/target_core_sbc.c

1025

pr_err("Got UNMAP, but backend device has"

drivers/target/target_core_sbc.c

1035

pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");

drivers/target/target_core_sbc.c

1049

pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n");

drivers/target/target_core_sbc.c

1108

pr_err("cmd exceeds last lba %llu "

drivers/target/target_core_sbc.c

1292

pr_err("DIFv1 checksum failed on sector %llu guard tag 0x%04x"

drivers/target/target_core_sbc.c

1304

pr_err("DIFv1 Type 1 reference failed on sector: %llu tag: 0x%08x"

drivers/target/target_core_sbc.c

1312

pr_err("DIFv1 Type 2 reference failed on sector: %llu tag: 0x%08x"

drivers/target/target_core_sbc.c

283

pr_err("WRITE_SAME PBDATA and LBDATA"

drivers/target/target_core_sbc.c

298

pr_err("WRITE_SAME exceeds last lba %llu (lba %llu, sectors %u)\n",

drivers/target/target_core_sbc.c

323

pr_err("Got WRITE_SAME w/ UNMAP=1, but backend device"

drivers/target/target_core_sbc.c

398

pr_err("sg_copy_to_buffer() failed for compare_and_write\n");

drivers/target/target_core_sbc.c

503

pr_err("Unable to allocate compare_and_write sg\n");

drivers/target/target_core_sbc.c

632

pr_err("Unsupported protect field %d\n", protect);

drivers/target/target_core_sbc.c

658

pr_err("Unsupported protect field %d\n", protect);

drivers/target/target_core_sbc.c

677

pr_err("CDB contains protect bit, but device + fabric does"

drivers/target/target_core_sbc.c

716

pr_err("Unable to determine pi_prot_type for CDB: 0x%02x "

drivers/target/target_core_sbc.c

750

pr_err("Got CDB: 0x%02x with DPO bit set, but device"

drivers/target/target_core_sbc.c

757

pr_err("Got CDB: 0x%02x with FUA bit set, but device"

drivers/target/target_core_sbc.c

935

pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not"

drivers/target/target_core_sbc.c

948

pr_err("VARIABLE_LENGTH_CMD service action"

drivers/target/target_core_sbc.c

967

pr_err("COMPARE_AND_WRITE contains NoLB: %u greater"

drivers/target/target_core_sbc.c

998

pr_err("Unsupported SA: 0x%02x\n",

drivers/target/target_core_spc.c

1143

pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n",

drivers/target/target_core_spc.c

1236

pr_err("REQUEST_SENSE description emulation not"

drivers/target/target_core_spc.c

2347

pr_err("Unable to allocate response buffer for IDENTITY INFO\n");

drivers/target/target_core_spc.c

2358

pr_err("transport_kmap_data_sg() failed in %s\n", __func__);

drivers/target/target_core_spc.c

766

pr_err("Unable to allocate response buffer for INQUIRY\n");

drivers/target/target_core_spc.c

774

pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n",

drivers/target/target_core_tmr.c

137

pr_err("ABORT_TASK: Found referenced %s task_tag: %llu\n",

drivers/target/target_core_tmr.c

157

pr_err("ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for ref_tag: %llu\n",

drivers/target/target_core_tmr.c

197

pr_err("Unable to locate struct se_cmd for TMR\n");

drivers/target/target_core_tmr.c

36

pr_err("Unable to allocate struct se_tmr_req\n");

drivers/target/target_core_tpg.c

307

pr_err("ACL entry for %s Initiator"

drivers/target/target_core_tpg.c

529

pr_err("Unable to locate se_tpg->se_tpg_tfo pointer\n");

drivers/target/target_core_tpg.c

615

pr_err("Unable to allocate se_lun memory\n");

drivers/target/target_core_tpg.c

621

pr_err("Unable to allocate se_lun stats memory\n");

drivers/target/target_core_transport.c

105

pr_err("kmem_cache_create() for t10_alua_tg_pt_gp_"

drivers/target/target_core_transport.c

114

pr_err("kmem_cache_create() for t10_alua_lba_map_"

drivers/target/target_core_transport.c

123

pr_err("kmem_cache_create() for t10_alua_lba_map_mem_"

drivers/target/target_core_transport.c

1513

pr_err("Received SCSI CDB with command_size: %d that"

drivers/target/target_core_transport.c

1528

pr_err("Unable to allocate cmd->t_task_cdb"

drivers/target/target_core_transport.c

1620

pr_err("cmd->se_lun is NULL\n");

drivers/target/target_core_transport.c

206

pr_err("Unable to load target_core_iblock\n");

drivers/target/target_core_transport.c

210

pr_err("Unable to load target_core_file\n");

drivers/target/target_core_transport.c

2118

pr_err("Unknown transport error for CDB 0x%02x: %d\n",

drivers/target/target_core_transport.c

214

pr_err("Unable to load target_core_pscsi\n");

drivers/target/target_core_transport.c

218

pr_err("Unable to load target_core_user\n");

drivers/target/target_core_transport.c

295

pr_err("Unable to allocate struct se_session from"

drivers/target/target_core_transport.c

321

pr_err("Unable to allocate se_sess->sess_cmd_map\n");

drivers/target/target_core_transport.c

328

pr_err("Unable to init se_sess->sess_tag_pool,"

drivers/target/target_core_transport.c

354

pr_err("init_session_tags called with percpu-ida tag_num:"

drivers/target/target_core_transport.c

359

pr_err("init_session_tags called with percpu-ida tag_size:"

drivers/target/target_core_transport.c

3619

pr_err("Unknown TMR function: 0x%02x.\n",

drivers/target/target_core_transport.c

66

pr_err("kmem_cache_create() for struct se_session"

drivers/target/target_core_transport.c

74

pr_err("kmem_cache_create() for struct se_ua failed\n");

drivers/target/target_core_transport.c

81

pr_err("kmem_cache_create() for struct t10_pr_registration"

drivers/target/target_core_transport.c

89

pr_err("kmem_cache_create() for t10_alua_lu_gp_cache"

drivers/target/target_core_transport.c

97

pr_err("kmem_cache_create() for t10_alua_lu_gp_mem_"

drivers/target/target_core_ua.c

84

pr_err("Unable to allocate struct se_ua\n");

drivers/target/target_core_user.c

1077

pr_err("tcmu: Could not allocate cmd id.\n");

drivers/target/target_core_user.c

1338

pr_err("cmd_id %u already completed with KEEP_BUF, ring is broken\n",

drivers/target/target_core_user.c

1450

pr_err("ring broken, not handling completions\n");

drivers/target/target_core_user.c

1488

pr_err("cmd_id %u not found, ring is broken\n",

drivers/target/target_core_user.c

1856

pr_err("Invalid addr to data page mapping (dpi %u) on device %s\n",

drivers/target/target_core_user.c

239

pr_err("global_max_data_area must be larger than 0.\n");

drivers/target/target_core_user.c

2451

pr_err("match_int() failed for dev attrib. Error %d.\n",

drivers/target/target_core_user.c

2457

pr_err("Invalid dev attrib value %d. Must be greater than zero.\n",

drivers/target/target_core_user.c

2472

pr_err("match_int() failed for max_data_area_mb=. Error %d.\n",

drivers/target/target_core_user.c

2477

pr_err("Invalid max_data_area %d.\n", val);

drivers/target/target_core_user.c

2481

pr_err("%d is too large. Adjusting max_data_area_mb to global limit of %u\n",

drivers/target/target_core_user.c

2486

pr_err("Invalid max_data_area %d (%zu pages): smaller than data_pages_per_blk (%u pages).\n",

drivers/target/target_core_user.c

2493

pr_err("Cannot set max_data_area_mb after it has been enabled.\n");

drivers/target/target_core_user.c

2512

pr_err("match_int() failed for data_pages_per_blk=. Error %d.\n",

drivers/target/target_core_user.c

2518

pr_err("Invalid data_pages_per_blk %d: greater than max_data_area_mb %d -> %zd pages).\n",

drivers/target/target_core_user.c

2526

pr_err("Cannot set data_pages_per_blk after it has been enabled.\n");

drivers/target/target_core_user.c

2545

pr_err("match_int() failed for cmd_ring_size_mb=. Error %d.\n",

drivers/target/target_core_user.c

2551

pr_err("Invalid cmd_ring_size_mb %d.\n", val);

drivers/target/target_core_user.c

2557

pr_err("Cannot set cmd_ring_size_mb after it has been enabled.\n");

drivers/target/target_core_user.c

2564

pr_err("%d is too large. Adjusting cmd_ring_size_mb to global limit of %u\n",

drivers/target/target_core_user.c

2605

pr_err("match_u64() failed for dev_size=. Error %d.\n",

drivers/target/target_core_user.c

2619

pr_err("match_int() failed for nl_reply_supported=. Error %d.\n",

drivers/target/target_core_user.c

2693

pr_err("Unable to set tcmu cmd_time_out while exports exist\n");

drivers/target/target_core_user.c

2820

pr_err("Unable to reconfigure device\n");

drivers/target/target_core_user.c

287

pr_err("Invalid block netlink value %u\n", val);

drivers/target/target_core_user.c

2882

pr_err("Unable to reconfigure device\n");

drivers/target/target_core_user.c

2964

pr_err("Unable to reconfigure device\n");

drivers/target/target_core_user.c

3031

pr_err("Device is not configured.\n");

drivers/target/target_core_user.c

3040

pr_err("Invalid block value %d\n", val);

drivers/target/target_core_user.c

3063

pr_err("Device is not configured.\n");

drivers/target/target_core_user.c

3072

pr_err("Invalid reset ring value %d\n", val);

drivers/target/target_core_user.c

308

pr_err("Could not reset device's netlink interface. Netlink is not blocked.\n");

drivers/target/target_core_user.c

3093

pr_err("Device is not configured.\n");

drivers/target/target_core_user.c

3109

pr_err("free_kept_buf: cmd_id %d not found\n", cmd_id);

drivers/target/target_core_user.c

3115

pr_err("free_kept_buf: cmd_id %d was not completed with KEEP_BUF\n",

drivers/target/target_core_user.c

333

pr_err("Invalid reset netlink value %u\n", val);

drivers/target/target_core_user.c

396

pr_err("tcmu nl cmd %u/%d completion could not find device with dev id %u.\n",

drivers/target/target_core_user.c

408

pr_err("Mismatched commands on %s (Expecting reply for %d. Current %d).\n",

drivers/target/target_core_xcopy.c

1023

pr_err("Receive Copy Results with non zero list identifier"

drivers/target/target_core_xcopy.c

1036

pr_err("Unsupported SA for receive copy results: 0x%02x\n", sa);

drivers/target/target_core_xcopy.c

131

pr_err("XCOPY 0xe4: code set of non binary type not supported\n");

drivers/target/target_core_xcopy.c

135

pr_err("XCOPY 0xe4: association other than LUN not supported\n");

drivers/target/target_core_xcopy.c

139

pr_err("XCOPY 0xe4: designator type unsupported: 0x%02x\n",

drivers/target/target_core_xcopy.c

149

pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len);

drivers/target/target_core_xcopy.c

157

pr_err("XCOPY 0xe4: Unsupported DESIGNATOR TYPE: 0x%02x\n",

drivers/target/target_core_xcopy.c

215

pr_err("XCOPY target descriptor list length is not"

drivers/target/target_core_xcopy.c

221

pr_err("XCOPY target descriptor supports a maximum"

drivers/target/target_core_xcopy.c

251

pr_err("XCOPY unsupported descriptor type code:"

drivers/target/target_core_xcopy.c

272

pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - "

drivers/target/target_core_xcopy.c

307

pr_err("XCOPY segment desc 0x02: Illegal desc_len:"

drivers/target/target_core_xcopy.c

317

pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n",

drivers/target/target_core_xcopy.c

346

pr_err("XCOPY segment descriptor list length is not"

drivers/target/target_core_xcopy.c

352

pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too"

drivers/target/target_core_xcopy.c

374

pr_err("XCOPY unsupported segment descriptor"

drivers/target/target_core_xcopy.c

467

pr_err("Unable to allocate xcopy_wq\n");

drivers/target/target_core_xcopy.c

798

pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n");

drivers/target/target_core_xcopy.c

811

pr_err("XCOPY descriptor list length %u exceeds maximum %u\n",

drivers/target/target_core_xcopy.c

819

pr_err("XCOPY with non zero inline data length\n");

drivers/target/target_core_xcopy.c

824

pr_err("XCOPY parameter truncation: data length %u too small "

drivers/target/target_core_xcopy.c

854

pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev"

drivers/target/target_core_xcopy.c

881

pr_err("EXTENDED_COPY operation explicitly disabled\n");

drivers/target/target_core_xcopy.c

887

pr_err("EXTENDED_COPY(LID4) not supported\n");

drivers/target/target_core_xcopy.c

896

pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n",

drivers/target/target_core_xcopy.c

923

pr_err("transport_kmap_data_sg failed in"

drivers/target/target_core_xcopy.c

929

pr_err("Receive Copy Results Op Parameters length"

drivers/target/tcm_fc/tfc_conf.c

242

pr_err("Error, a single TPG=1 is used for HW port mappings\n");

drivers/target/tcm_fc/tfc_io.c

230

pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, "

drivers/target/tcm_remote/tcm_remote.c

105

pr_err("Passed tpgt: %lu exceeds TL_TPGS_PER_HBA: %u\n",

drivers/target/tcm_remote/tcm_remote.c

186

pr_err("Unable to locate prefix for emulated Target Port: %s\n",

drivers/target/tcm_remote/tcm_remote.c

195

pr_err("Emulated NAA %s Address: %s, exceeds max: %d\n",

drivers/target/tcm_remote/tcm_remote.c

98

pr_err("Unable to locate \"tpgt_#\" directory group\n");

drivers/tc/tc.c

125

pr_err("%s: Cannot provide slot space "

drivers/tc/tc.c

178

pr_err("tc: Cannot reserve resource\n");

drivers/tc/tc.c

190

pr_err("tc: Cannot reserve resource\n");

drivers/tc/tc.c

87

pr_err("tc%x: unable to allocate tc_dev\n", slot);

drivers/tee/amdtee/call.c

192

pr_err("unload ta: status = 0x%x\n", status);

drivers/tee/amdtee/call.c

218

pr_err("close session: status = 0x%x\n", status);

drivers/tee/amdtee/call.c

258

pr_err("invalid Params. Abort invoke command\n");

drivers/tee/amdtee/call.c

274

pr_err("invoke command: failed to copy output\n");

drivers/tee/amdtee/call.c

308

pr_err("map shared memory: page unaligned. addr 0x%llx",

drivers/tee/amdtee/call.c

341

pr_err("map shared memory: status = 0x%x\n", status);

drivers/tee/amdtee/call.c

369

pr_err("invalid Params. Abort open session\n");

drivers/tee/amdtee/call.c

384

pr_err("open session: failed to copy output\n");

drivers/tee/amdtee/call.c

411

pr_err("load TA: page unaligned. blob 0x%llx", blob);

drivers/tee/amdtee/core.c

194

pr_err("failed to get firmware name\n");

drivers/tee/amdtee/core.c

201

pr_err("failed to load firmware %s\n", fw_name);

drivers/tee/amdtee/core.c

209

pr_err("%s: get_free_pages failed\n", __func__);

drivers/tee/amdtee/core.c

245

pr_err("unsupported client login method\n");

drivers/tee/amdtee/core.c

251

pr_err("failed to copy TA binary\n");

drivers/tee/amdtee/core.c

275

pr_err("open_session failed %d\n", arg->ret);

drivers/tee/amdtee/core.c

293

pr_err("reached maximum session count %d\n", TEE_NUM_SESSIONS);

drivers/tee/amdtee/core.c

368

pr_err("map_shmem failed: ret = %d\n", rc);

drivers/tee/amdtee/core.c

464

pr_err("tee not present\n");

drivers/tee/amdtee/core.c

480

pr_err("shared pool configuration error\n");

drivers/tee/amdtee/core.c

515

pr_err("initialization failed\n");

drivers/tee/optee/call.c

236

pr_err("Freeing non-free entry\n");

drivers/tee/optee/call.c

348

pr_err("Invalid offs %u\n", offs);

drivers/tee/optee/call.c

356

pr_err("Bit pos %lu is already free\n", bit);

drivers/tee/optee/device.c

147

pr_err("tee_shm_alloc_kernel_buf failed\n");

drivers/tee/optee/device.c

158

pr_err("tee_shm_get_va failed\n");

drivers/tee/optee/device.c

53

pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",

drivers/tee/optee/device.c

98

pr_err("device registration failed, err: %d\n", rc);

drivers/tee/optee/ffa_abi.c

1152

pr_err("Failed to initialize async notifications: %d",

drivers/tee/optee/ffa_abi.c

334

pr_err("Unregister SHM id 0x%llx rc %d\n", global_handle, rc);

drivers/tee/optee/ffa_abi.c

338

pr_err("mem_reclaim: 0x%llx %d", global_handle, rc);

drivers/tee/optee/ffa_abi.c

361

pr_err("mem_reclaim: 0x%llx %d", global_handle, rc);

drivers/tee/optee/ffa_abi.c

761

pr_err("Release SHM id 0x%llx rc %d\n", global_handle, rc);

drivers/tee/optee/ffa_abi.c

765

pr_err("mem_reclaim: 0x%llx %d", global_handle, rc);

drivers/tee/optee/ffa_abi.c

792

pr_err("Unexpected error %d\n", rc);

drivers/tee/optee/ffa_abi.c

824

pr_err("Unexpected error %d\n", rc);

drivers/tee/optee/ffa_abi.c

829

pr_err("Incompatible OP-TEE API version %lu.%lu",

drivers/tee/optee/ffa_abi.c

850

pr_err("Unexpected error %d", rc);

drivers/tee/optee/ffa_abi.c

854

pr_err("Unexpected exchange error %lu", data.data0);

drivers/tee/optee/smc_abi.c

1436

pr_err("static shm service not available\n");

drivers/tee/optee/smc_abi.c

1441

pr_err("only normal cached shared memory supported\n");

drivers/tee/optee/smc_abi.c

1452

pr_err("shared memory ioremap failed\n");

drivers/tee/optee/smc_abi.c

1883

pr_err("platform_get_irq: ret %d\n", rc);

drivers/tee/optee/smc_abi.c

857

pr_err("%s: tee_shm_get_va %p failed\n",

drivers/tee/qcomtee/async.c

152

pr_err("Async message version mismatch (%u != %u)\n",

drivers/tee/qcomtee/async.c

164

pr_err("Unsupported async message %u\n", async_msg->op);

drivers/tee/qcomtee/async.c

170

pr_err("Unable to parse async message for op %u\n",

drivers/tee/qcomtee/core.c

104

pr_err("%s release failed, ret = %d (%x)\n",

drivers/tee/qcomtee/core.c

701

pr_err("QTEE returned with %d.\n", ret);

drivers/tee/tee_core.c

1111

pr_err("could not register %s driver\n",

drivers/tee/tee_core.c

1544

pr_err("couldn't create class\n");

drivers/tee/tee_core.c

1550

pr_err("failed to allocate char dev region\n");

drivers/tee/tee_core.c

1556

pr_err("failed to register tee bus\n");

drivers/thermal/cpufreq_cooling.c

342

pr_err("The span of pd %*pbl is misaligned with cpufreq policy %*pbl\n",

drivers/thermal/cpufreq_cooling.c

350

pr_err("The number of performance states in pd %*pbl (%u) doesn't match the number of cooling levels (%u)\n",

drivers/thermal/cpufreq_cooling.c

528

pr_err("%s: cpufreq policy isn't valid: %p\n", __func__, policy);

drivers/thermal/cpufreq_cooling.c

574

pr_err("%s: unsorted frequency tables are not supported\n",

drivers/thermal/cpufreq_cooling.c

584

pr_err("%s: Failed to add freq constraint (%d)\n", __func__,

drivers/thermal/cpufreq_cooling.c

654

pr_err("cpufreq_cooling: OF node not available for cpu%d\n",

drivers/thermal/cpufreq_cooling.c

664

pr_err("cpufreq_cooling: cpu%d failed to register as cooling device: %ld\n",

drivers/thermal/cpuidle_cooling.c

265

pr_err("Failed to register the cpuidle cooling device" \

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

161

pr_err("Invalid _ART data\n");

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

86

pr_err("Invalid _TRT data\n");

drivers/thermal/intel/intel_powerclamp.c

290

pr_err("Out of recommended window size %lu, between 2-10\n",

drivers/thermal/intel/intel_powerclamp.c

597

pr_err("powerclamp: idle_inject_register failed\n");

drivers/thermal/intel/intel_powerclamp.c

723

pr_err("CPU does not support MWAIT\n");

drivers/thermal/intel/intel_powerclamp.c

90

pr_err("Out of recommended range %lu, between 6-25ms\n",

drivers/thermal/rockchip_thermal.c

619

pr_err("%s: unknown table mode: %d\n", __func__, table->mode);

drivers/thermal/rockchip_thermal.c

624

pr_err("%s: invalid temperature, temp=%d error=%d\n",

drivers/thermal/rockchip_thermal.c

676

pr_err("%s: unknown table mode: %d\n", __func__, table->mode);

drivers/thermal/tegra/soctherm.c

1013

pr_err("soctherm: OC ALARM 0x%08x\n", ex);

drivers/thermal/tegra/soctherm.c

1048

pr_err("soctherm: Ignored unexpected OC ALARM 0x%08x\n", st);

drivers/thermal/tegra/soctherm.c

1247

pr_err("%s: Failed to create IRQ domain\n", __func__);

drivers/thermal/tegra/soctherm.c

894

pr_err("soctherm: Ignored unexpected INTRs 0x%08x\n", st);

drivers/thermal/tegra/soctherm.c

980

pr_err("soctherm: ERROR in handling %s alarm\n",

drivers/thermal/thermal_core.c

1518

pr_err("No thermal zone type defined\n");

drivers/thermal/thermal_core.c

1523

pr_err("Thermal zone name (%s) too long, should be under %d chars\n",

drivers/thermal/thermal_core.c

1529

pr_err("Incorrect number of thermal trips\n");

drivers/thermal/thermal_core.c

1534

pr_err("Thermal zone device ops not defined or invalid\n");

drivers/thermal/thermal_core.c

242

pr_err("Failed to register governor: '%s'",

drivers/thermal/thermal_of.c

147

pr_err("%pOFn: missing thermal sensor\n", child);

drivers/thermal/thermal_of.c

159

pr_err("%pOFn: Failed to read thermal-sensors cells: %d\n", child, ret);

drivers/thermal/thermal_of.c

183

pr_err("%pOFn: Couldn't get polling-delay-passive: %d\n", np, ret);

drivers/thermal/thermal_of.c

191

pr_err("%pOFn: Couldn't get polling-delay: %d\n", np, ret);

drivers/thermal/thermal_of.c

256

pr_err("Invalid cooling-device entry\n");

drivers/thermal/thermal_of.c

263

pr_err("wrong reference to cooling device, missing limits\n");

drivers/thermal/thermal_of.c

294

pr_err("Add a cooling_device property with at least one device\n");

drivers/thermal/thermal_of.c

315

pr_err("Failed to get node tz by name\n");

drivers/thermal/thermal_of.c

383

pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);

drivers/thermal/thermal_of.c

389

pr_err("Failed to parse trip points for %pOFn id=%d\n", sensor, id);

drivers/thermal/thermal_of.c

399

pr_err("Failed to initialize monitoring delays from %pOFn\n", np);

drivers/thermal/thermal_of.c

420

pr_err("Failed to register thermal zone %pOFn: %d\n", np, ret);

drivers/thermal/thermal_of.c

429

pr_err("Failed to enabled thermal zone '%s', id=%d: %d\n",

drivers/thermal/thermal_of.c

71

pr_err("missing temperature property\n");

drivers/thermal/thermal_of.c

78

pr_err("missing hysteresis property\n");

drivers/thermal/thermal_of.c

85

pr_err("wrong trip type property\n");

drivers/thermal/ti-soc-thermal/ti-bandgap.c

318

pr_err("%s: invalid bandgap pointer\n", __func__);

drivers/tty/ehv_bytechan.c

122

pr_err("ehv-bc: no 'interrupts' property in %pOF node\n", np);

drivers/tty/ehv_bytechan.c

131

pr_err("ehv-bc: no 'hv-handle' property in %pOFn node\n",

drivers/tty/ehv_bytechan.c

795

pr_err("ehv-bc: could not register tty driver (ret=%i)\n", ret);

drivers/tty/ehv_bytechan.c

803

pr_err("ehv-bc: could not register platform driver (ret=%i)\n",

drivers/tty/goldfish.c

296

pr_err("goldfish_tty: No MEM resource available!\n");

drivers/tty/goldfish.c

302

pr_err("goldfish_tty: Unable to ioremap base!\n");

drivers/tty/goldfish.c

320

pr_err("goldfish_tty: Reached maximum tty number of %d.\n",

drivers/tty/goldfish.c

372

pr_err("goldfish_tty: No IRQ available!\n");

drivers/tty/hvc/hvc_iucv.c

1317

pr_err("%lu is not a valid value for the hvc_iucv= "

drivers/tty/hvc/hvc_iucv.c

1330

pr_err("Allocating memory failed with "

drivers/tty/hvc/hvc_iucv.c

1334

pr_err("hvc_iucv_allow= does not specify a valid "

drivers/tty/hvc/hvc_iucv.c

1338

pr_err("hvc_iucv_allow= specifies too many "

drivers/tty/hvc/hvc_iucv.c

1350

pr_err("Allocating memory failed with reason code=%d\n", 1);

drivers/tty/hvc/hvc_iucv.c

1358

pr_err("Allocating memory failed with reason code=%d\n", 2);

drivers/tty/hvc/hvc_iucv.c

1368

pr_err("Registering HVC terminal device as "

drivers/tty/hvc/hvc_iucv.c

1377

pr_err("Creating a new HVC terminal device "

drivers/tty/hvc/hvc_iucv.c

1386

pr_err("Registering IUCV handlers failed with error code=%d\n",

drivers/tty/hvc/hvc_opal.c

171

pr_err("hvc_opal: Unknown protocol for %pOF\n",

drivers/tty/hvc/hvc_opal.c

202

pr_err("hvc_opal: Device %pOF has duplicate terminal number #%d\n",

drivers/tty/hvc/hvc_opal.c

220

pr_err("hvc_opal: Unable to map interrupt for device %pOF\n",

drivers/tty/hvc/hvc_vio.c

318

pr_err("hvc_vio: Unknown protocol for %pOF\n", vdev->dev.of_node);

drivers/tty/hvc/hvcs.c

741

pr_err("HVCS: Failed to initialize core driver.\n");

drivers/tty/hvc/hvsi.c

1073

pr_err("Couldn't register hvsi console driver\n");

drivers/tty/ipwireless/hardware.c

1579

pr_err(IPWIRELESS_PCCARD_NAME

drivers/tty/n_gsm.c

1211

pr_err("%s: unsupported adaption %d\n", __func__,

drivers/tty/n_gsm.c

1326

pr_err("%s: unsupported adaption %d\n", __func__,

drivers/tty/n_gsm.c

1333

pr_err("%s: gsm_data_alloc error", __func__);

drivers/tty/n_gsm.c

4065

pr_err("alloc_netdev failed\n");

drivers/tty/n_gsm.c

4086

pr_err("network register fail %d\n", retval);

drivers/tty/n_gsm.c

4627

pr_err("n_gsm: can't register line discipline (err = %d)\n",

drivers/tty/n_gsm.c

4635

pr_err("gsm_init: tty allocation failed.\n");

drivers/tty/n_gsm.c

4651

pr_err("gsm_init: tty registration failed.\n");

drivers/tty/n_hdlc.c

232

pr_err("%s: tty already associated!\n", __func__);

drivers/tty/n_hdlc.c

238

pr_err("%s: n_hdlc_alloc failed\n", __func__);

drivers/tty/n_hdlc.c

790

pr_err("N_HDLC: error registering line discipline: %d\n",

drivers/tty/rpmsg_tty.c

254

pr_err("Couldn't install driver: %d\n", ret);

drivers/tty/rpmsg_tty.c

260

pr_err("Couldn't register driver: %d\n", ret);

drivers/tty/serial/8250/8250_mtk.c

143

pr_err("failed to prepare rx slave single\n");

drivers/tty/serial/8250/8250_mtk.c

180

pr_err("failed to configure rx dma channel\n");

drivers/tty/serial/8250/8250_mtk.c

182

pr_err("failed to configure tx dma channel\n");

drivers/tty/serial/8250/8250_omap.c

1863

pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n",

drivers/tty/serial/8250/8250_omap.c

1865

pr_err("This ensures that you still see kernel messages. Please\n");

drivers/tty/serial/8250/8250_omap.c

1866

pr_err("update your kernel commandline.\n");

drivers/tty/serial/8250/serial_cs.c

366

pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",

drivers/tty/serial/cpm_uart.c

1341

pr_err("can't set direction for gpio #%d: %d\n",

drivers/tty/serial/cpm_uart.c

884

pr_err("%s: could not allocate buffer descriptors\n", __func__);

drivers/tty/serial/cpm_uart.c

907

pr_err("%s: could not allocate coherent memory\n", __func__);

drivers/tty/serial/earlycon.c

50

pr_err("%s: Couldn't map %pa\n", __func__, &paddr);

drivers/tty/serial/kgdboc.c

355

pr_err("config string too long\n");

drivers/tty/serial/kgdboc.c

360

pr_err("Cannot reconfigure while KGDB is connected.\n");

drivers/tty/serial/kgdboc.c

437

pr_err("config string not provided\n");

drivers/tty/serial/kgdboc.c

442

pr_err("config string too long\n");

drivers/tty/serial/lantiq.c

869

pr_err("failed to get fpi clk\n");

drivers/tty/serial/men_z135_uart.c

892

pr_err("Failed to register UART: %d\n", err);

drivers/tty/serial/men_z135_uart.c

898

pr_err("Failed to register MCB driver: %d\n", err);

drivers/tty/serial/milbeaut_usio.c

588

pr_err("%s: uart registration failed: %d\n", __func__, ret);

drivers/tty/serial/milbeaut_usio.c

594

pr_err("%s: drv registration failed: %d\n", __func__, ret);

drivers/tty/serial/mpc52xx_uart.c

578

pr_err("%s: Can't find FIFOC node\n", __func__);

drivers/tty/serial/mpc52xx_uart.c

588

pr_err("%s: Can't lookup FIFO clock\n", __func__);

drivers/tty/serial/mpc52xx_uart.c

593

pr_err("%s: Can't enable FIFO clock\n", __func__);

drivers/tty/serial/mpc52xx_uart.c

601

pr_err("%s: Can't map FIFOC\n", __func__);

drivers/tty/serial/mpc52xx_uart.c

607

pr_err("%s: Can't get FIFOC irq\n", __func__);

drivers/tty/serial/msm_serial.c

1441

pr_err("msm_serial: Unknown PM state %d\n", state);

drivers/tty/serial/pic32_uart.c

972

pr_err("failed to register %s:%d\n",

drivers/tty/serial/pic32_uart.c

979

pr_err("fail to register pic32 uart\n");

drivers/tty/serial/pmac_zilog.c

81

#define pmz_error(fmt, arg...) pr_err("ttyPZ%d: " fmt, uap->port.line, ## arg)

drivers/tty/serial/qcom_geni_serial.c

1453

pr_err("Invalid line %d\n", co->index);

drivers/tty/serial/samsung_tty.c

1885

pr_err("%s: Controller clock not found\n",

drivers/tty/serial/samsung_tty.c

1893

pr_err("uart: clock failed to prepare+enable: %d\n", ret);

drivers/tty/serial/samsung_tty.c

2042

pr_err("Failed to register Samsung UART driver\n");

drivers/tty/serial/serial-tegra.c

1677

pr_err("Could not register %s driver\n",

drivers/tty/serial/serial-tegra.c

1684

pr_err("Uart platform driver register failed, e = %d\n", ret);

drivers/tty/serial/sh-sci.c

3264

pr_err("Can't probe register map for given port\n");

drivers/tty/serial/sprd_serial.c

1239

pr_err("Failed to register SPRD-UART driver\n");

drivers/tty/sysrq.c

1050

pr_err("Failed to register input handler, error %d", error);

drivers/tty/sysrq.c

1239

pr_err("Failed to register proc interface\n");

drivers/tty/sysrq.c

988

pr_err("Failed to register input sysrq handler, error %d\n",

drivers/tty/sysrq.c

995

pr_err("Failed to open input device, error %d\n", error);

drivers/tty/tty.h

15

#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__)

drivers/tty/tty_io.c

3237

pr_err("%s: Attempt to register invalid tty line number (%d)\n",

drivers/tty/vcc.c

1026

pr_err("VCC: TTY driver alloc failed\n");

drivers/tty/vcc.c

1041

pr_err("VCC: TTY driver registration failed\n");

drivers/tty/vcc.c

1067

pr_err("VCC: TTY init failed\n");

drivers/tty/vcc.c

1073

pr_err("VCC: VIO driver registration failed\n");

drivers/tty/vcc.c

343

pr_err("VCC: unknown msg [%02x:%02x:%04x:%08x]\n",

drivers/tty/vcc.c

457

pr_err("VCC: unexpected LDC event(%d)\n", event);

drivers/tty/vcc.c

573

pr_err("VCC: TTY driver not registered\n");

drivers/tty/vcc.c

603

pr_err("VCC: no more TTY indices left for allocation\n");

drivers/tty/vcc.c

743

pr_err("VCC: open: Failed to find VCC port\n");

drivers/tty/vcc.c

748

pr_err("VCC: open: LDC channel not configured\n");

drivers/tty/vcc.c

757

pr_err("VCC: open: TTY port not found\n");

drivers/tty/vcc.c

762

pr_err("VCC: open: TTY ops not defined\n");

drivers/tty/vcc.c

775

pr_err("VCC: close: TTY port not found\n");

drivers/tty/vcc.c

800

pr_err("VCC: hangup: Failed to find VCC port\n");

drivers/tty/vcc.c

805

pr_err("VCC: hangup: TTY port not found\n");

drivers/tty/vcc.c

828

pr_err("VCC: write: Failed to find VCC port");

drivers/tty/vcc.c

889

pr_err("VCC: write_room: Failed to find VCC port\n");

drivers/tty/vcc.c

907

pr_err("VCC: chars_in_buffer: Failed to find VCC port\n");

drivers/tty/vcc.c

925

pr_err("VCC: break_ctl: Failed to find VCC port\n");

drivers/tty/vcc.c

966

pr_err("VCC: install: Failed to find VCC port\n");

drivers/tty/vt/keyboard.c

1089

pr_err("error %d while registering trigger %s\n",

drivers/tty/vt/keyboard.c

667

pr_err("k_lowercase was called - impossible\n");

drivers/tty/vt/keyboard.c

765

pr_err("k_fn called with value=%d\n", value);

drivers/ufs/core/ufshcd-priv.h

365

pr_err("Max General LU supported by UFS isn't initialized\n");

drivers/ufs/core/ufshcd.c

8121

pr_err("%s: Couldn't find valid icc_level = %d", __func__, i);

drivers/ufs/host/ufs-exynos.c

830

pr_err("%s: incoming dev_req_params is NULL\n", __func__);

drivers/ufs/host/ufs-exynos.c

843

pr_err("%s: failed to determine capabilities\n", __func__);

drivers/ufs/host/ufs-qcom.c

979

pr_err("%s: incoming dev_req_params is NULL\n", __func__);

drivers/usb/atm/usbatm.c

1284

pr_err("%s unusable with this kernel!\n", usbatm_driver_name);

drivers/usb/cdns3/cdns3-gadget.c

2503

pr_err("usbss: invalid parameters\n");

drivers/usb/class/usbtmc.c

171

pr_err("can not find device for minor %d", iminor(inode));

drivers/usb/common/common.c

377

pr_err("%pOF: unsupported otg-rev: 0x%x\n",

drivers/usb/core/driver.c

1020

pr_err("%s: error %d registering device driver %s\n",

drivers/usb/core/driver.c

1094

pr_err("%s: error %d registering interface driver %s\n",

drivers/usb/core/hcd.c

898

pr_err("%s: failed to get bus number\n", usbcore_name);

drivers/usb/core/hub.c

6087

pr_err("%s: can't allocate workqueue for usb hub\n", usbcore_name);

drivers/usb/dwc2/gadget.c

4541

pr_err("%s: called with no device\n", __func__);

drivers/usb/dwc2/hcd_ddma.c

207

pr_err("hsotg = %p\n", hsotg);

drivers/usb/fotg210/fotg210-udc.c

368

pr_err("dma_mapping_error\n");

drivers/usb/fotg210/fotg210-udc.c

637

pr_err("request error!!\n");

drivers/usb/fotg210/fotg210-udc.c

831

pr_err("%s : empty queue\n", __func__);

drivers/usb/gadget/configfs.c

1076

pr_err("webusb: landingPage URL too long\n");

drivers/usb/gadget/configfs.c

1089

pr_err("webusb: landingPage URL %d bytes too long for given URL scheme\n",

drivers/usb/gadget/configfs.c

1642

pr_err("languages must contain the same number of strings\n");

drivers/usb/gadget/configfs.c

1708

pr_err("Need at least one configuration in %s.\n",

drivers/usb/gadget/configfs.c

1719

pr_err("Config %s/%d of %s needs at least one function.\n",

drivers/usb/gadget/configfs.c

620

pr_err("Unable to locate . in FUNC.INSTANCE\n");

drivers/usb/gadget/configfs.c

716

pr_err("Unable to locate . in name.bConfigurationValue\n");

drivers/usb/gadget/function/f_fs.c

2120

pr_err("failed registering file system (%d)\n", ret);

drivers/usb/gadget/function/f_fs.c

2428

pr_err("%s: config_ep_by_speed(%s) returned %d\n",

drivers/usb/gadget/function/f_fs.c

3299

pr_err("two %sspeed descriptors for EP %d\n",

drivers/usb/gadget/function/f_fs.c

793

pr_err("functionfs read size %d > requested size %zd, dropping excess data. "

drivers/usb/gadget/function/f_mass_storage.c

2894

pr_err("no file given for LUN%d\n", id);

drivers/usb/gadget/function/f_mass_storage.c

3045

pr_err("There should be at least one LUN.\n");

drivers/usb/gadget/function/f_mass_storage.c

3302

pr_err("Unable to locate . in LUN.NUMBER\n");

drivers/usb/gadget/function/f_midi2.c

2725

pr_err("f_midi2: No EP is defined\n");

drivers/usb/gadget/function/f_midi2.c

2733

pr_err("f_midi2: Invalid protocol 0x%x (caps 0x%x) for EP %d\n",

drivers/usb/gadget/function/f_midi2.c

2742

pr_err("f_midi2: Invalid group definitions for block %d:%d\n",

drivers/usb/gadget/function/f_midi2.c

2751

pr_err("f_midi2: Invalid MIDI1 group definitions for block %d:%d\n",

drivers/usb/gadget/function/f_midi2.c

2759

pr_err("f_midi2: No block is defined\n");

drivers/usb/gadget/function/f_midi2.c

2881

pr_err("f_midi2: MIDI1 definition is missing\n");

drivers/usb/gadget/function/f_printer.c

1545

pr_err("alloc_chrdev_region %d\n", status);

drivers/usb/gadget/function/f_rndis.c

449

pr_err("RNDIS command error %d, %d/%d\n",

drivers/usb/gadget/function/f_tcm.c

1094

pr_err("%s() state %d transfer failed\n", __func__, cmd->state);

drivers/usb/gadget/function/f_tcm.c

1381

pr_err("Missing nexus, ignoring command\n");

drivers/usb/gadget/function/f_tcm.c

1388

pr_err("usbg_get_cmd failed\n");

drivers/usb/gadget/function/f_tcm.c

1529

pr_err("Wrong signature on CBW\n");

drivers/usb/gadget/function/f_tcm.c

1533

pr_err("Wrong length for CBW\n");

drivers/usb/gadget/function/f_tcm.c

1543

pr_err("Missing nexus, ignoring command\n");

drivers/usb/gadget/function/f_tcm.c

1549

pr_err("usbg_get_cmd failed\n");

drivers/usb/gadget/function/f_tcm.c

172

pr_err("%s(%d) ERR: %d\n", __func__, __LINE__, ret);

drivers/usb/gadget/function/f_tcm.c

1920

pr_err(MSG, atomic_read(&tpg->tpg_port_count));

drivers/usb/gadget/function/f_tcm.c

1955

pr_err(NEXUS_STORE_MSG, page, USBG_NAMELEN);

drivers/usb/gadget/function/f_tcm.c

1963

pr_err("Missing 'naa.' prefix\n");

drivers/usb/gadget/function/f_tcm.c

199

pr_err("ERR %s(%d)\n", __func__, __LINE__);

drivers/usb/gadget/function/f_tcm.c

2360

pr_err("Can't claim all required eps\n");

drivers/usb/gadget/function/f_tcm.c

244

pr_err("%s(%d)\n", __func__, __LINE__);

drivers/usb/gadget/function/f_tcm.c

268

pr_err("%s(%d)\n", __func__, __LINE__);

drivers/usb/gadget/function/f_tcm.c

296

pr_err("%s(%d): %d\n", __func__, __LINE__, ret);

drivers/usb/gadget/function/f_tcm.c

361

pr_err("BOT: endpoint setup failed\n");

drivers/usb/gadget/function/f_tcm.c

444

pr_err("No LUNs configured?\n");

drivers/usb/gadget/function/f_tcm.c

686

pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);

drivers/usb/gadget/function/f_tcm.c

695

pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);

drivers/usb/gadget/function/f_tcm.c

70

pr_err("ERR %s(%d)\n", __func__, __LINE__);

drivers/usb/gadget/function/f_tcm.c

703

pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);

drivers/usb/gadget/function/f_tcm.c

791

pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);

drivers/usb/gadget/function/f_tcm.c

811

pr_err("%s(%d) => %d\n", __func__, __LINE__, ret);

drivers/usb/gadget/function/f_tcm.c

836

pr_err("%s(%d)\n", __func__, __LINE__);

drivers/usb/gadget/function/f_tcm.c

853

pr_err("%s(%d)\n", __func__, __LINE__);

drivers/usb/gadget/function/f_tcm.c

88

pr_err("%s(%d) ERR: %d\n", __func__, __LINE__, ret);

drivers/usb/gadget/function/f_tcm.c

960

pr_err("UASP: endpoint setup failed\n");

drivers/usb/gadget/function/f_tcm.c

97

pr_err("ERR %s(%d)\n", __func__, __LINE__);

drivers/usb/gadget/function/storage_common.h

31

#define LERROR(lun, fmt, args...) _LMSG(pr_err, lun, fmt, ## args)

drivers/usb/gadget/function/u_serial.c

1100

pr_err("ttyGS%d: allocate console buffer failed\n", port->port_num);

drivers/usb/gadget/function/u_serial.c

1314

pr_err("%s: failed to register tty for port %d, err %ld\n",

drivers/usb/gadget/function/u_serial.c

1373

pr_err("serial line %d not allocated.\n", port_num);

drivers/usb/gadget/function/u_serial.c

1377

pr_err("serial line %d is in use.\n", port_num);

drivers/usb/gadget/function/u_serial.c

1580

pr_err("%s: cannot register, err %d\n",

drivers/usb/gadget/legacy/inode.c

1676

pr_err("%s expected %s controller not %s\n",

drivers/usb/gadget/udc/at91_udc.h

171

#define ERR(stuff...) pr_err("udc: " stuff)

drivers/usb/gadget/udc/atmel_usba_udc.c

1419

pr_err("udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "

drivers/usb/gadget/udc/atmel_usba_udc.c

1490

pr_err("udc: %s: TXCOMP: Invalid endpoint state %d, "

drivers/usb/gadget/udc/atmel_usba_udc.c

1519

pr_err("udc: %s: RXRDY: Invalid endpoint state %d, "

drivers/usb/gadget/udc/dummy_hcd.c

2808

pr_err("Number of emulated UDC must be in range of 1...%d\n",

drivers/usb/gadget/udc/m66592-udc.c

113

pr_err("unexpect pipe num (%d)\n", pipenum);

drivers/usb/gadget/udc/m66592-udc.c

1130

pr_err("USB speed unknown\n");

drivers/usb/gadget/udc/m66592-udc.c

1189

pr_err("ctrl_stage: unexpect ctsq(%x)\n", ctsq);

drivers/usb/gadget/udc/m66592-udc.c

129

pr_err("unexpect pipe num (%d)\n", pipenum);

drivers/usb/gadget/udc/m66592-udc.c

1548

pr_err("platform_get_resource error.\n");

drivers/usb/gadget/udc/m66592-udc.c

1563

pr_err("ioremap error.\n");

drivers/usb/gadget/udc/m66592-udc.c

158

pr_err("unexpect pipe num (%d)\n", pipenum);

drivers/usb/gadget/udc/m66592-udc.c

1596

pr_err("request_irq error (%d)\n", ret);

drivers/usb/gadget/udc/m66592-udc.c

175

pr_err("unexpect pipe num(%d)\n", pipenum);

drivers/usb/gadget/udc/m66592-udc.c

267

pr_err("m66592 pipe memory is insufficient\n");

drivers/usb/gadget/udc/m66592-udc.c

296

pr_err("ep_release: unexpect pipenum (%d)\n",

drivers/usb/gadget/udc/m66592-udc.c

398

pr_err("bulk pipe is insufficient\n");

drivers/usb/gadget/udc/m66592-udc.c

414

pr_err("interrupt pipe is insufficient\n");

drivers/usb/gadget/udc/m66592-udc.c

423

pr_err("isochronous pipe is insufficient\n");

drivers/usb/gadget/udc/m66592-udc.c

431

pr_err("unexpect xfer type\n");

drivers/usb/gadget/udc/m66592-udc.c

446

pr_err("pipe_buffer_setting fail\n");

drivers/usb/gadget/udc/m66592-udc.c

582

pr_err("start_ep0: unexpect ctsq(%x)\n", ctsq);

drivers/usb/gadget/udc/m66592-udc.c

756

pr_err("pipe0 is busy. maybe cpu i/o bus "

drivers/usb/gadget/udc/m66592-udc.c

806

pr_err("write fifo not ready. pipnum=%d\n", pipenum);

drivers/usb/gadget/udc/m66592-udc.c

855

pr_err("read fifo not ready");

drivers/usb/gadget/udc/net2280.c

1243

pr_err("%s: Invalid ep=%p or ep->desc or req=%p\n",

drivers/usb/gadget/udc/net2280.c

1330

pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);

drivers/usb/gadget/udc/net2280.c

1390

pr_err("%s: Invalid ep=%p or ep0\n", __func__, _ep);

drivers/usb/gadget/udc/net2280.c

1403

pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);

drivers/usb/gadget/udc/net2280.c

1429

pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);

drivers/usb/gadget/udc/net2280.c

196

pr_err("%s: failed at line=%d\n", __func__, __LINE__);

drivers/usb/gadget/udc/net2280.c

519

pr_err("%s: Invalid ep=%p\n", __func__, _ep);

drivers/usb/gadget/udc/net2280.c

552

pr_err("%s: Invalid ep\n", __func__);

drivers/usb/gadget/udc/net2280.c

990

pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);

drivers/usb/gadget/udc/omap_udc.h

190

#define ERR(stuff...) pr_err("udc: " stuff)

drivers/usb/gadget/udc/pch_udc.c

1046

pr_err("%s: Invalid address\n", __func__);

drivers/usb/gadget/udc/pch_udc.c

1396

pr_err("%s: can't request irq %d, err: %d\n",

drivers/usb/gadget/udc/pch_udc.c

1567

pr_err("%s: could not create DMA chain:%d\n", __func__, retval);

drivers/usb/gadget/udc/pxa25x_udc.c

2292

pr_err("%s: not XScale!\n", driver_name);

drivers/usb/gadget/udc/pxa25x_udc.c

2321

pr_err("%s: unrecognized processor: %08x\n",

drivers/usb/gadget/udc/pxa25x_udc.c

2375

pr_err("%s: can't get irq %d, err %d\n",

drivers/usb/gadget/udc/pxa25x_udc.h

238

#define ERR(stuff...) pr_err("udc: " stuff)

drivers/usb/gadget/udc/r8a66597-udc.c

357

pr_err("r8a66597 pipe memory is insufficient\n");

drivers/usb/host/ohci-pxa27x.c

425

pr_err("no resource of IORESOURCE_IRQ");

drivers/usb/host/xen-hcd.c

1593

pr_err("xenhcd failed to create kmem cache\n");

drivers/usb/host/xen-hcd.c

662

pr_err("xenhcd: error: %d grants\n", nr_grants);

drivers/usb/host/xen-hcd.c

667

pr_err("xenhcd: gnttab_alloc_grant_references() error\n");

drivers/usb/host/xhci-dbgtty.c

651

pr_err("Can't register dbc tty driver\n");

drivers/usb/host/xhci-pci-renesas.c

137

pr_err("firmware is size %zd is not (4k - 64k).",

drivers/usb/host/xhci-pci-renesas.c

144

pr_err("no valid firmware header found.");

drivers/usb/host/xhci-pci-renesas.c

151

pr_err("fw ver pointer is outside of the firmware image");

drivers/usb/isp1760/isp1760-if.c

237

pr_err("isp1760: no platform data\n");

drivers/usb/misc/adutux.c

242

pr_err("%s - error, can't find device for minor %d\n",

drivers/usb/misc/adutux.c

362

pr_err("No device or device unplugged %d\n", retval);

drivers/usb/misc/adutux.c

523

pr_err("No device or device unplugged %d\n", retval);

drivers/usb/misc/iowarrior.c

628

pr_err("%s - error, can't find device for minor %d\n",

drivers/usb/misc/legousbtower.c

319

pr_err("error, can't find device for minor %d\n", subminor);

drivers/usb/misc/onboard_usb_dev.c

310

pr_err("Failed to attach USB driver: %pe\n", ERR_PTR(err));

drivers/usb/misc/usb3503.c

435

pr_err("usb3503: Failed to register I2C driver: %d\n", err);

drivers/usb/misc/usb3503.c

441

pr_err("usb3503: Failed to register platform driver: %d\n",

drivers/usb/misc/usblcd.c

87

pr_err("USBLCD: %s - error, can't find device for minor %d\n",

drivers/usb/musb/musb_core.c

1637

pr_err("%s: kernel must disable external hubs, please fix the configuration\n",

drivers/usb/musb/omap2430.c

69

pr_err("%s: musb core is not yet initialized\n", __func__);

drivers/usb/musb/omap2430.c

75

pr_err("%s: musb core is not yet ready\n", __func__);

drivers/usb/musb/tusb6010.c

1046

pr_err("tusb: Powerup response failed\n");

drivers/usb/musb/ux500.c

150

pr_err("HS USB OTG: no transceiver configured\n");

drivers/usb/phy/phy-ulpi.c

157

pr_err("ULPI integrity check: failed!");

drivers/usb/serial/console.c

115

pr_err("No USB device connected to ttyUSB%i\n", co->index);

drivers/usb/serial/digi_acceleport.c

970

pr_err("%s: port or port->private is NULL, status=%d\n",

drivers/usb/serial/usb-serial.c

1326

pr_err("%s - registering bus driver failed\n", __func__);

drivers/usb/serial/usb-serial.c

1344

pr_err("%s - tty_register_driver failed\n", __func__);

drivers/usb/serial/usb-serial.c

1351

pr_err("%s - registering generic driver failed\n", __func__);

drivers/usb/serial/usb-serial.c

1362

pr_err("%s - returning with error %d\n", __func__, result);

drivers/usb/serial/usb-serial.c

1434

pr_err("problem %d when registering driver %s\n", retval, driver->description);

drivers/usb/usb-skeleton.c

94

pr_err("%s - error, can't find device for minor %d\n",

drivers/usb/usbip/stub_main.c

370

pr_err("kmem_cache_create failed\n");

drivers/usb/usbip/stub_main.c

376

pr_err("usb_register failed %d\n", ret);

drivers/usb/usbip/stub_main.c

383

pr_err("driver_create_file failed\n");

drivers/usb/usbip/stub_main.c

390

pr_err("driver_create_file failed\n");

drivers/usb/usbip/usbip_common.c

295

pr_err("unknown command\n");

drivers/usb/usbip/usbip_common.c

490

pr_err("unknown command\n");

drivers/usb/usbip/usbip_common.c

596

pr_err("unknown command\n");

drivers/usb/usbip/usbip_event.c

132

pr_err("failed to create usbip_event\n");

drivers/usb/usbip/vhci_rx.c

229

pr_err("received pdu size is %d, should be %d\n", ret,

drivers/usb/usbip/vhci_rx.c

249

pr_err("unknown pdu %u\n", pdu.base.command);

drivers/usb/usbip/vhci_rx.c

69

pr_err("cannot find a urb of seqnum %u max seqnum %u\n",

drivers/usb/usbip/vhci_sysfs.c

195

pr_err("not connected %d\n", vdev->ud.status);

drivers/usb/usbip/vhci_sysfs.c

219

pr_err("pdev %u\n", *pdev_nr);

drivers/usb/usbip/vhci_sysfs.c

225

pr_err("rhport %u\n", *rhport);

drivers/usb/usbip/vhci_sysfs.c

289

pr_err("Failed attach request for unsupported USB speed: %s\n",

drivers/usb/usbip/vhci_tx.c

142

pr_err("sendmsg failed!, ret=%d for %zd\n", ret,

drivers/usb/usbip/vhci_tx.c

221

pr_err("sendmsg failed!, ret=%d for %zd\n", ret,

drivers/usb/usbip/vudc_main.c

41

pr_err("Number of emulated UDC must be no less than 1");

drivers/usb/usbip/vudc_rx.c

222

pr_err("rx: unknown command");

drivers/vdpa/pds/aux_drv.c

129

pr_err("%s: aux driver register failed: %pe\n",

drivers/vfio/container.c

582

pr_err("vfio: misc device register failed\n");

drivers/vfio/vfio_iommu_spapr_tce.c

321

pr_err("tce_vfio: Wrong IOMMU type\n");

drivers/vfio/vfio_iommu_spapr_tce.c

527

pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%ld\n",

drivers/vfio/vfio_iommu_spapr_tce.c

584

pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%ld\n",

drivers/vhost/scsi.c

1094

pr_err("Faulted on virtio_scsi_cmd_resp\n");

drivers/vhost/scsi.c

1136

pr_err("Faulted on virtio scsi type=%d\n", type);

drivers/vhost/scsi.c

1545

pr_err("Faulted on virtio_scsi_ctrl_tmf_resp\n");

drivers/vhost/scsi.c

1599

pr_err("Unable to locate active struct vhost_scsi_nexus for LUN RESET.\n");

drivers/vhost/scsi.c

1622

pr_err("vhost_scsi tmf log allocation error\n");

drivers/vhost/scsi.c

1663

pr_err("Faulted on virtio_scsi_ctrl_an_resp\n");

drivers/vhost/scsi.c

1952

pr_err("Unable to allocate tv_cmd->sgl\n");

drivers/vhost/scsi.c

1962

pr_err("Unable to allocate tv_cmd->prot_sgl\n");

drivers/vhost/scsi.c

2004

pr_err("vhost-scsi endpoint already set for %s.\n",

drivers/vhost/scsi.c

2284

pr_err("Invalid max_io_vqs of %d. Using %d.\n", nvqs,

drivers/vhost/scsi.c

2288

pr_err("Invalid max_io_vqs of %d. Using 1.\n", nvqs);

drivers/vhost/scsi.c

2557

pr_err("kstrtoul() returned %d for fabric_prot_type\n", ret);

drivers/vhost/scsi.c

2561

pr_err("Invalid vhost_scsi fabric_prot_type: %lu\n", val);

drivers/vhost/scsi.c

2601

pr_err("Unable to allocate struct vhost_scsi_nexus\n");

drivers/vhost/scsi.c

2643

pr_err("Unable to remove TCM_vhost I_T Nexus with"

drivers/vhost/scsi.c

2651

pr_err("Unable to remove TCM_vhost I_T Nexus with"

drivers/vhost/scsi.c

2715

pr_err("Emulated NAA Sas Address: %s, exceeds"

drivers/vhost/scsi.c

2724

pr_err("Passed SAS Initiator Port %s does not"

drivers/vhost/scsi.c

2735

pr_err("Passed FCP Initiator Port %s does not"

drivers/vhost/scsi.c

2746

pr_err("Passed iSCSI Initiator Port %s does not"

drivers/vhost/scsi.c

2754

pr_err("Unable to locate prefix for emulated Initiator Port:"

drivers/vhost/scsi.c

2795

pr_err("Unable to allocate struct vhost_scsi_tpg");

drivers/vhost/scsi.c

2849

pr_err("Unable to allocate struct vhost_scsi_tport");

drivers/vhost/scsi.c

2874

pr_err("Unable to locate prefix for emulated Target Port:"

drivers/vhost/scsi.c

2881

pr_err("Emulated %s Address: %s, exceeds"

drivers/vhost/scsi.c

60

pr_err("Setting inline_sg_cnt is not supported.\n");

drivers/vhost/scsi.c

672

pr_err("Could not copy data while handling misaligned cmd. Error %zu\n",

drivers/vhost/scsi.c

730

pr_err("Faulted on virtio_scsi_cmd_resp\n");

drivers/vhost/scsi.c

75

pr_err("Max inline_sg_cnt is %u\n", VHOST_SCSI_PREALLOC_SGLS);

drivers/vhost/scsi.c

872

pr_err("%s: iter->iov is NULL, but expected bytes: %zu"

drivers/vhost/scsi.c

879

pr_err("%s: requested sgl_count: %d exceeds pre-allocated"

drivers/vhost/scsi.c

932

pr_err("Could not read %u bytes while handling misaligned cmd\n",

drivers/video/backlight/apple_bl.c

146

pr_err("unable to find PCI host\n");

drivers/video/backlight/apple_bl.c

158

pr_err("unknown hardware\n");

drivers/video/backlight/qcom-wled.c

1176

pr_err("Failed to toggle sync reg rc:%d\n", rc);

drivers/video/backlight/qcom-wled.c

517

pr_err("Error in configuring CABC rc=%d\n", rc);

drivers/video/fbdev/amifb.c

3515

pr_err("amifb: No Chip RAM for frame buffer");

drivers/video/fbdev/au1100fb.c

691

pr_err("No LCD panels supported by driver!");

drivers/video/fbdev/au1100fb.c

748

pr_err("fail to retrieve registers resource");

drivers/video/fbdev/au1100fb.c

766

pr_err("fail to lock memory region at 0x%08lx",

drivers/video/fbdev/au1100fb.c

791

pr_err("fail to allocate framebuffer (size: %zuK))",

drivers/video/fbdev/au1100fb.c

824

pr_err("Fail to allocate colormap (%d entries)",

drivers/video/fbdev/au1100fb.c

834

pr_err("cannot register new framebuffer");

drivers/video/fbdev/core/fb_chrdev.c

434

pr_err("Unable to get major %d for fb devs\n", FB_MAJOR);

drivers/video/fbdev/core/fbmem.c

425

pr_err("%s: enable CONFIG_FB_BIG_ENDIAN to "

drivers/video/fbdev/core/fbmem.c

429

pr_err("%s: enable CONFIG_FB_LITTLE_ENDIAN to "

drivers/video/fbdev/core/fbmem.c

671

pr_err("Unable to create fb class; errno = %d\n", ret);

drivers/video/fbdev/efifb.c

464

pr_err("efifb: video memory @ 0x%lx spans multiple EFI memory regions\n",

drivers/video/fbdev/efifb.c

493

pr_err("efifb: abort, cannot remap video memory 0x%x @ 0x%lx\n",

drivers/video/fbdev/efifb.c

567

pr_err("efifb: cannot allocate colormap\n");

drivers/video/fbdev/efifb.c

573

pr_err("efifb: cannot acquire aperture\n");

drivers/video/fbdev/efifb.c

578

pr_err("efifb: cannot register framebuffer\n");

drivers/video/fbdev/fsl-diu-fb.c

1922

pr_err("fsl-diu-fb: can't find 'cpu' device node\n");

drivers/video/fbdev/fsl-diu-fb.c

1928

pr_err("fsl-diu-fb: missing 'd-cache-size' property' "

drivers/video/fbdev/fsl-diu-fb.c

1946

pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' "

drivers/video/fbdev/fsl-diu-fb.c

1964

pr_err("fsl-diu-fb: failed to register platform driver\n");

drivers/video/fbdev/fsl-diu-fb.c

967

pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel);

drivers/video/fbdev/goldfishfb.c

144

pr_err("%s: timeout waiting for base update\n", __func__);

drivers/video/fbdev/hgafb.c

358

pr_err("hgafb: HGA card not detected.\n");

drivers/video/fbdev/macfb.c

640

pr_err("macfb: unknown or unsupported bit depth: %d\n",

drivers/video/fbdev/omap/lcd_dma.c

116

pr_err("DMA virtual resolution is not supported in 1510 mode\n");

drivers/video/fbdev/omap/lcd_dma.c

439

pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);

drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c

96

pr_err("error in spi_write %x\n", data);

drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c

537

pr_err("%s sdi enable failed\n", __func__);

drivers/video/fbdev/omap2/omapfb/vrfb.c

295

pr_err("vrfb: no free contexts\n");

drivers/video/fbdev/omap2/omapfb/vrfb.c

311

pr_err("vrfb: failed to reserve VRFB "

drivers/video/fbdev/pxafb.c

1252

pr_err("%s: not properly initialized, thread terminated\n",

drivers/video/fbdev/pxafb.c

1296

pr_err("%s: unable to create kernel thread\n", __func__);

drivers/video/fbdev/pxafb.c

1441

pr_err("%s: Failed to prepare clock\n", __func__);

drivers/video/fbdev/smscufx.c

1407

pr_err("ufx_i2c_configure failed");

drivers/video/fbdev/smscufx.c

1494

pr_err("Unable to get valid EDID from device/display\n");

drivers/video/fbdev/smscufx.c

1499

pr_err("Using previously queried EDID\n");

drivers/video/fbdev/smscufx.c

1511

pr_err("Using default/backup EDID\n");

drivers/video/fbdev/smscufx.c

1784

pr_err("%s - nonzero write bulk status received: %d\n",

drivers/video/fbdev/smscufx.c

1940

pr_err("usb_submit_urb error %x\n", ret);

drivers/video/fbdev/smscufx.c

491

pr_err("DDR2 initialisation timed out, reg 0x0000=0x%08x", tmp);

drivers/video/fbdev/uvesafb.c

1291

pr_err("mode switch failed (eax=0x%x, err=%d)\n",

drivers/video/fbdev/uvesafb.c

1688

pr_err("vbe_init() failed with %d\n", err);

drivers/video/fbdev/uvesafb.c

1710

pr_err("request region 0x3c0-0x3e0 failed\n");

drivers/video/fbdev/uvesafb.c

1717

pr_err("cannot reserve video memory at 0x%lx\n",

drivers/video/fbdev/uvesafb.c

1727

pr_err("abort, cannot ioremap 0x%x bytes of video memory at 0x%lx\n",

drivers/video/fbdev/uvesafb.c

1736

pr_err("failed to register framebuffer device\n");

drivers/video/fbdev/uvesafb.c

205

pr_err("failed to execute %s\n", v86d_path);

drivers/video/fbdev/uvesafb.c

206

pr_err("make sure that the v86d helper is installed and executable\n");

drivers/video/fbdev/uvesafb.c

430

pr_err("Getting VBE info block failed (eax=0x%x, err=%d)\n",

drivers/video/fbdev/uvesafb.c

436

pr_err("Sorry, pre-VBE 2.0 cards are not supported\n");

drivers/video/fbdev/uvesafb.c

441

pr_err("Missing mode list!\n");

drivers/video/fbdev/vt8500lcdfb.c

355

pr_err("%s: Failed to allocate framebuffer\n", __func__);

drivers/video/fbdev/wm8505fb.c

331

pr_err("%s: Failed to allocate framebuffer\n", __func__);

drivers/video/of_display_timing.c

106

pr_err("%pOF: error reading timing properties\n", np);

drivers/video/of_display_timing.c

156

pr_err("%pOF: could not find display-timings node\n", np);

drivers/video/of_display_timing.c

162

pr_err("%pOF: could not allocate struct disp'\n", np);

drivers/video/of_display_timing.c

172

pr_err("%pOF: no timing specifications given\n", np);

drivers/video/of_display_timing.c

183

pr_err("%pOF: no timings specified\n", np);

drivers/video/of_display_timing.c

189

pr_err("%pOF: could not allocate timings array\n", np);

drivers/video/of_display_timing.c

202

pr_err("%pOF: could not allocate display_timing struct\n",

drivers/video/of_display_timing.c

213

pr_err("%pOF: error in timing %d\n",

drivers/video/of_display_timing.c

33

pr_err("%pOF: could not find property %s\n", np, name);

drivers/video/of_display_timing.c

45

pr_err("%pOF: illegal timing specification in %s\n", np, name);

drivers/video/of_videomode.c

38

pr_err("%pOF: no timings specified\n", np);

drivers/video/sticore.c

123

pr_err("STI init_graph failed (ret %d, errno %d)\n", ret, err);

drivers/virt/acrn/hsm.c

515

pr_err("Create misc dev failed!\n");

drivers/virt/acrn/hsm.c

521

pr_err("Setup I/O request handler failed!\n");

drivers/virt/coco/arm-cca-guest/arm-cca-guest.c

207

pr_err("Error %d registering with TSM\n", ret);

drivers/virt/coco/guest/report.c

477

pr_err("\"%s\" ops already registered\n", conflict->name);

drivers/virt/coco/guest/report.c

482

pr_err("configfs/tsm/report not empty\n");

drivers/virt/coco/sev-guest/sev-guest.c

222

pr_err("failed to mark page shared, ret=%d\n", ret);

drivers/virt/coco/tdx-guest/tdx-guest.c

219

pr_err("Failed to restore encryption mask for Quote buffer, leak it\n");

drivers/virt/coco/tdx-guest/tdx-guest.c

302

pr_err("GetQuote hypercall failed, status:%llx\n", err);

drivers/virt/coco/tdx-guest/tdx-guest.c

308

pr_err("GetQuote request timedout\n");

drivers/virt/coco/tdx-guest/tdx-guest.c

418

pr_err("Failed to allocate Quote buffer\n");

drivers/virt/fsl_hypervisor.c

665

pr_err("fsl-hv: out of memory\n");

drivers/virt/fsl_hypervisor.c

829

pr_err("fsl-hv: cannot register device\n");

drivers/virt/fsl_hypervisor.c

843

pr_err("fsl-hv: no 'interrupts' property in %pOF node\n",

drivers/virt/fsl_hypervisor.c

871

pr_err("fsl-hv: node %pOF has missing or "

drivers/virt/fsl_hypervisor.c

883

pr_err("fsl-hv: could not request irq %u for node %pOF\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

196

pr_err("%s: Error in cpulist parse [rc=%d]\n", ne_misc_dev.name, rc);

drivers/virt/nitro_enclaves/ne_misc_dev.c

203

pr_err("%s: No CPUs available in CPU pool\n", ne_misc_dev.name);

drivers/virt/nitro_enclaves/ne_misc_dev.c

216

pr_err("%s: CPU %d is offline, has to be online to get its metadata\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

231

pr_err("%s: Invalid NUMA node %d\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

240

pr_err("%s: CPUs with different NUMA nodes\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

254

pr_err("%s: CPU 0 has to remain available\n", ne_misc_dev.name);

drivers/virt/nitro_enclaves/ne_misc_dev.c

263

pr_err("%s: CPU sibling %d for CPU 0 is in CPU pool\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

280

pr_err("%s: CPU %d is not in CPU pool\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

319

pr_err("%s: Invalid core id %d for CPU %d\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

343

pr_err("%s: CPU %d is not offlined [rc=%d]\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

403

pr_err("%s: CPU %d is not onlined [rc=%d]\n",

drivers/virt/nitro_enclaves/ne_misc_dev.c

439

pr_err("%s: The CPU pool is used by enclave(s)\n", ne_misc_dev.name);

drivers/virt/nitro_enclaves/ne_misc_dev.c

448

pr_err("%s: Error in setup CPU pool [rc=%d]\n", ne_misc_dev.name, rc);

drivers/virt/nitro_enclaves/ne_misc_dev.c

457

pr_err("%s: Error in param set copystring [rc=%d]\n", ne_misc_dev.name, rc);

drivers/virt/vboxguest/vboxguest_utils.c

61

VBG_LOG(vbg_err, pr_err);

drivers/virtio/virtio_mmio.c

710

pr_err("Failed to register parent device!\n");

drivers/w1/masters/ds2482.c

224

pr_err("%s: timeout on channel %d\n",

drivers/w1/w1.c

1215

pr_err("Failed to register bus. err=%d.\n", retval);

drivers/w1/w1.c

1221

pr_err("Failed to register master driver. err=%d.\n",

drivers/w1/w1.c

1228

pr_err("Failed to register slave driver. err=%d.\n",

drivers/w1/w1_int.c

234

pr_err("Device doesn't exist.\n");

drivers/w1/w1_int.c

71

pr_err("Failed to register master device. err=%d\n", err);

drivers/w1/w1_int.c

99

pr_err("w1_add_master_device: invalid function set\n");

drivers/watchdog/acquirewdt.c

244

pr_err("I/O address 0x%04x already in use\n", wdt_stop);

drivers/watchdog/acquirewdt.c

251

pr_err("I/O address 0x%04x already in use\n", wdt_start);

drivers/watchdog/acquirewdt.c

257

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/advantechwdt.c

243

pr_err("I/O address 0x%04x already in use\n",

drivers/watchdog/advantechwdt.c

251

pr_err("I/O address 0x%04x already in use\n", wdt_start);

drivers/watchdog/advantechwdt.c

265

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/alim1535_wdt.c

407

pr_err("cannot register reboot notifier (err=%d)\n", ret);

drivers/watchdog/alim1535_wdt.c

413

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/alim7101_wdt.c

404

pr_err("cannot register reboot notifier (err=%d)\n", rc);

drivers/watchdog/alim7101_wdt.c

410

pr_err("cannot register restart handler (err=%d)\n", rc);

drivers/watchdog/alim7101_wdt.c

416

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/cpwd.c

389

pr_err("Cannot register IRQ %d\n", p->irq);

drivers/watchdog/cpwd.c

534

pr_err("Unable to map registers\n");

drivers/watchdog/cpwd.c

541

pr_err("Unable to find /options node\n");

drivers/watchdog/cpwd.c

588

pr_err("Could not register misc device for dev %d\n",

drivers/watchdog/diag288_wdt.c

128

pr_err("The watchdog timer cannot be started or reset\n");

drivers/watchdog/diag288_wdt.c

169

pr_err("The watchdog cannot be initialized\n");

drivers/watchdog/diag288_wdt.c

96

pr_err("The watchdog cannot be activated\n");

drivers/watchdog/eurotechwdt.c

144

pr_err("invalid irq number\n");

drivers/watchdog/eurotechwdt.c

428

pr_err("IRQ %d is not free\n", irq);

drivers/watchdog/eurotechwdt.c

433

pr_err("IO %X is not free\n", io);

drivers/watchdog/eurotechwdt.c

440

pr_err("can't register reboot notifier (err=%d)\n", ret);

drivers/watchdog/eurotechwdt.c

446

pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR);

drivers/watchdog/f71808e_wdt.c

190

pr_err("I/O address 0x%04x already in use\n", (int)base);

drivers/watchdog/f71808e_wdt.c

250

pr_err("pulse width out of range\n");

drivers/watchdog/f71808e_wdt.c

623

pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin);

drivers/watchdog/geodewdt.c

218

pr_err("No timers were available\n");

drivers/watchdog/ib700wdt.c

282

pr_err("STOP method I/O %X is not available\n", WDT_STOP);

drivers/watchdog/ib700wdt.c

289

pr_err("START method I/O %X is not available\n", WDT_START);

drivers/watchdog/ib700wdt.c

303

pr_err("failed to register misc device\n");

drivers/watchdog/ibmasr.c

236

pr_err("address %#x already in use\n", asr_base);

drivers/watchdog/ibmasr.c

393

pr_err("failed to register misc device\n");

drivers/watchdog/ie6xx_wdt.c

295

pr_err("Watchdog timer: value of timeout %d (dec) "

drivers/watchdog/indydog.c

175

pr_err("cannot register reboot notifier (err=%d)\n", ret);

drivers/watchdog/indydog.c

181

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/it8712f_wdt.c

372

pr_err("Device not activated, skipping\n");

drivers/watchdog/it8712f_wdt.c

378

pr_err("Base address not set, skipping\n");

drivers/watchdog/it8712f_wdt.c

414

pr_err("unable to disable watchdog timer\n");

drivers/watchdog/it8712f_wdt.c

420

pr_err("unable to register reboot notifier\n");

drivers/watchdog/it8712f_wdt.c

426

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/it87_wdt.c

344

pr_err("Unsupported Chip found, Chip %04x Revision %02x\n",

drivers/watchdog/it87_wdt.c

348

pr_err("no device\n");

drivers/watchdog/it87_wdt.c

351

pr_err("Unknown Chip found, Chip %04x Revision %04x\n",

drivers/watchdog/lenovo_se30_wdt.c

97

pr_err("I/O address 0x%04x already in use\n", addr);

drivers/watchdog/machzwd.c

341

pr_err("device file closed unexpectedly. Will not stop the WDT!\n");

drivers/watchdog/machzwd.c

411

pr_err("cannot reserve I/O ports at %d\n", ZF_IOBASE);

drivers/watchdog/machzwd.c

418

pr_err("can't register reboot notifier (err=%d)\n", ret);

drivers/watchdog/machzwd.c

424

pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR);

drivers/watchdog/mixcomwd.c

155

pr_err("release called while internal timer alive\n");

drivers/watchdog/mixcomwd.c

271

pr_err("No card detected, or port not available\n");

drivers/watchdog/mixcomwd.c

277

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/moxart_wdt.c

109

pr_err("%s: of_clk_get failed\n", __func__);

drivers/watchdog/moxart_wdt.c

115

pr_err("%s: incorrect clock frequency\n", __func__);

drivers/watchdog/nv_tco.c

326

pr_err("failed to get tcobase address\n");

drivers/watchdog/nv_tco.c

333

pr_err("I/O address 0x%04x already in use\n", tcobase);

drivers/watchdog/nv_tco.c

349

pr_err("I/O address 0x%04x already in use\n",

drivers/watchdog/nv_tco.c

359

pr_err("Could not disable SMI caused by TCO\n");

drivers/watchdog/nv_tco.c

369

pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware\n");

drivers/watchdog/nv_tco.c

407

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/octeon-wdt-main.c

525

pr_err("Error: Cannot allocate boot vector.\n");

drivers/watchdog/pc87413_wdt.c

512

pr_err("cannot register reboot notifier (err=%d)\n", ret);

drivers/watchdog/pc87413_wdt.c

516

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/pc87413_wdt.c

527

pr_err("cannot request SWC region at 0x%x\n", swc_base_addr);

drivers/watchdog/pcwd.c

862

pr_err("This driver only supports 1 device\n");

drivers/watchdog/pcwd.c

867

pr_err("No I/O-Address for card detected\n");

drivers/watchdog/pcwd.c

879

pr_err("I/O address 0x%04x already in use\n",

drivers/watchdog/pcwd.c

922

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/pcwd.c

930

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/pcwd_pci.c

271

pr_err("Card timer not enabled\n");

drivers/watchdog/pcwd_pci.c

296

pr_err("Card did not acknowledge disable attempt\n");

drivers/watchdog/pcwd_pci.c

570

pr_err("Attempt to open already opened device\n");

drivers/watchdog/pcwd_pci.c

690

pr_err("This driver only supports 1 device\n");

drivers/watchdog/pcwd_pci.c

695

pr_err("Not possible to enable PCI Device\n");

drivers/watchdog/pcwd_pci.c

700

pr_err("No I/O-Address for card detected\n");

drivers/watchdog/pcwd_pci.c

710

pr_err("I/O address 0x%04x already in use\n",

drivers/watchdog/pcwd_pci.c

746

pr_err("cannot register reboot notifier (err=%d)\n", ret);

drivers/watchdog/pcwd_pci.c

753

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/pcwd_pci.c

761

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/pcwd_usb.c

203

pr_err("can't resubmit intr, usb_submit_urb failed with result %d\n",

drivers/watchdog/pcwd_usb.c

275

pr_err("Card did not acknowledge enable attempt\n");

drivers/watchdog/pcwd_usb.c

293

pr_err("Card did not acknowledge disable attempt\n");

drivers/watchdog/pcwd_usb.c

615

pr_err("This driver only supports 1 device\n");

drivers/watchdog/pcwd_usb.c

624

pr_err("The device isn't a Human Interface Device\n");

drivers/watchdog/pcwd_usb.c

636

pr_err("Couldn't find an INTR & IN endpoint\n");

drivers/watchdog/pcwd_usb.c

661

pr_err("Out of memory\n");

drivers/watchdog/pcwd_usb.c

679

pr_err("Problem registering interrupt URB\n");

drivers/watchdog/pcwd_usb.c

723

pr_err("cannot register reboot notifier (err=%d)\n", retval);

drivers/watchdog/pcwd_usb.c

729

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/pcwd_usb.c

736

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/pika_wdt.c

234

pr_err("Unable to find fpga\n");

drivers/watchdog/pika_wdt.c

241

pr_err("Unable to map fpga\n");

drivers/watchdog/pika_wdt.c

250

pr_err("Unable to find fpga-sd\n");

drivers/watchdog/pika_wdt.c

258

pr_err("Unable to map fpga-sd\n");

drivers/watchdog/pika_wdt.c

277

pr_err("Unable to register miscdev\n");

drivers/watchdog/rc32434_wdt.c

265

pr_err("failed to retrieve resources\n");

drivers/watchdog/rc32434_wdt.c

271

pr_err("failed to remap I/O resources\n");

drivers/watchdog/rc32434_wdt.c

290

pr_err("failed to register watchdog device\n");

drivers/watchdog/rc32434_wdt.c

76

pr_err("timeout value must be between 0 and %d\n", max_to);

drivers/watchdog/riowd.c

193

pr_err("Cannot map registers\n");

drivers/watchdog/riowd.c

201

pr_err("Cannot register watchdog misc device\n");

drivers/watchdog/sa1100_wdt.c

198

pr_err("SA1100/PXA2xx Watchdog Timer: clock not found: %d\n",

drivers/watchdog/sa1100_wdt.c

205

pr_err("SA1100/PXA2xx Watchdog Timer: clock failed to prepare+enable: %d\n",

drivers/watchdog/sb_wdog.c

296

pr_err("%s: cannot register reboot notifier (err=%d)\n",

drivers/watchdog/sb_wdog.c

308

pr_err("%s: failed to request irq 1 - %d\n",

drivers/watchdog/sbc60xxwdt.c

336

pr_err("I/O address 0x%04x already in use\n", wdt_start);

drivers/watchdog/sbc60xxwdt.c

344

pr_err("I/O address 0x%04x already in use\n", wdt_stop);

drivers/watchdog/sbc60xxwdt.c

352

pr_err("cannot register reboot notifier (err=%d)\n", rc);

drivers/watchdog/sbc60xxwdt.c

358

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/sbc7240_wdt.c

251

pr_err("I/O address 0x%04x already in use\n",

drivers/watchdog/sbc7240_wdt.c

271

pr_err("cannot register reboot notifier (err=%d)\n", rc);

drivers/watchdog/sbc7240_wdt.c

277

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/sbc7240_wdt.c

74

pr_err("timeout value must be 1<=x<=%d\n", SBC7240_MAX_TIMEOUT);

drivers/watchdog/sbc8360.c

330

pr_err("Invalid timeout index (must be 0-63)\n");

drivers/watchdog/sbc8360.c

336

pr_err("ENABLE method I/O %X is not available\n",

drivers/watchdog/sbc8360.c

342

pr_err("BASETIME method I/O %X is not available\n",

drivers/watchdog/sbc8360.c

350

pr_err("Failed to register reboot notifier\n");

drivers/watchdog/sbc8360.c

356

pr_err("failed to register misc device\n");

drivers/watchdog/sbc_epx_c3.c

182

pr_err("cannot register reboot notifier (err=%d)\n", ret);

drivers/watchdog/sbc_epx_c3.c

188

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/sbc_fitpc2_wdt.c

210

pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);

drivers/watchdog/sbc_fitpc2_wdt.c

215

pr_err("I/O address 0x%04x already in use\n", DATA_PORT);

drivers/watchdog/sbc_fitpc2_wdt.c

221

pr_err("margin must be in range 31 - 255 seconds, you tried to set %d\n",

drivers/watchdog/sbc_fitpc2_wdt.c

229

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/sc1200wdt.c

358

pr_err("Unable to register IO port %#x\n", io);

drivers/watchdog/sc1200wdt.c

399

pr_err("io parameter must be specified\n");

drivers/watchdog/sc1200wdt.c

413

pr_err("Unable to register IO port %#x\n", io);

drivers/watchdog/sc1200wdt.c

424

pr_err("Unable to register reboot notifier err = %d\n", ret);

drivers/watchdog/sc1200wdt.c

430

pr_err("Unable to register miscdev on minor %d\n",

drivers/watchdog/sc520_wdt.c

393

pr_err("Unable to remap memory\n");

drivers/watchdog/sc520_wdt.c

400

pr_err("cannot register reboot notifier (err=%d)\n", rc);

drivers/watchdog/sc520_wdt.c

406

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/sch311x_wdt.c

483

pr_err("Base address not set\n");

drivers/watchdog/scx200_wdt.c

236

pr_err("unable to register reboot notifier\n");

drivers/watchdog/smsc37b787_wdt.c

534

pr_err("Unable to register IO port %#x\n", IOPORT);

drivers/watchdog/smsc37b787_wdt.c

548

pr_err("Unable to register reboot notifier err = %d\n", ret);

drivers/watchdog/smsc37b787_wdt.c

554

pr_err("Unable to register miscdev on minor %d\n",

drivers/watchdog/w83627hf_wdt.c

441

pr_err("Unsupported chip ID: 0x%02x\n", val);

drivers/watchdog/w83627hf_wdt.c

525

pr_err("failed to initialize watchdog (err=%d)\n", ret);

drivers/watchdog/w83877f_wdt.c

359

pr_err("I/O address 0x%04x already in use\n",

drivers/watchdog/w83877f_wdt.c

366

pr_err("I/O address 0x%04x already in use\n", WDT_PING);

drivers/watchdog/w83877f_wdt.c

373

pr_err("cannot register reboot notifier (err=%d)\n", rc);

drivers/watchdog/w83877f_wdt.c

379

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/w83977f_wdt.c

480

pr_err("I/O address 0x%04x already in use\n", IO_INDEX_PORT);

drivers/watchdog/w83977f_wdt.c

487

pr_err("cannot register reboot notifier (err=%d)\n", rc);

drivers/watchdog/w83977f_wdt.c

493

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/wafer5823wdt.c

266

pr_err("I/O address 0x%04x already in use\n", wdt_stop);

drivers/watchdog/wafer5823wdt.c

273

pr_err("I/O address 0x%04x already in use\n", wdt_start);

drivers/watchdog/wafer5823wdt.c

280

pr_err("cannot register reboot notifier (err=%d)\n", ret);

drivers/watchdog/wafer5823wdt.c

286

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/watchdog_core.c

136

pr_err("%s: driver supplied timeout (%u) out of range\n",

drivers/watchdog/watchdog_core.c

147

pr_err("%s: DT supplied timeout (%u) out of range\n", dev_str, t);

drivers/watchdog/watchdog_core.c

311

pr_err("watchdog%d: Cannot register reboot notifier (%d)\n",

drivers/watchdog/watchdog_core.c

350

pr_err("%s: failed to register watchdog device (err = %d)\n",

drivers/watchdog/watchdog_dev.c

1058

pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n",

drivers/watchdog/watchdog_dev.c

1061

pr_err("%s: a legacy watchdog module is probably present.\n",

drivers/watchdog/watchdog_dev.c

1076

pr_err("watchdog%d unable to add device %d:%d\n",

drivers/watchdog/watchdog_dev.c

1229

pr_err("Failed to create watchdog kworker\n");

drivers/watchdog/watchdog_dev.c

1236

pr_err("couldn't register class\n");

drivers/watchdog/watchdog_dev.c

1242

pr_err("watchdog: unable to allocate char dev region\n");

drivers/watchdog/wdrtas.c

166

pr_err("event-scan failed: %li\n", result);

drivers/watchdog/wdrtas.c

526

pr_err("couldn't get token for set-indicator. Terminating watchdog code.\n");

drivers/watchdog/wdrtas.c

532

pr_err("couldn't get token for event-scan. Terminating watchdog code.\n");

drivers/watchdog/wdrtas.c

566

pr_err("couldn't register watchdog misc device. Terminating watchdog code.\n");

drivers/watchdog/wdrtas.c

597

pr_err("could not register reboot notifier. Terminating watchdog code.\n");

drivers/watchdog/wdrtas.c

83

pr_err("setting the watchdog to %i timeout failed: %li\n",

drivers/watchdog/wdt.c

591

pr_err("unknown card type '%d'\n", type);

drivers/watchdog/wdt.c

604

pr_err("I/O address 0x%04x already in use\n", io);

drivers/watchdog/wdt.c

611

pr_err("IRQ %d is not free\n", irq);

drivers/watchdog/wdt.c

617

pr_err("cannot register reboot notifier (err=%d)\n", ret);

drivers/watchdog/wdt.c

624

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/wdt.c

632

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/wdt977.c

458

pr_err("I/O address 0x%04x already in use\n",

drivers/watchdog/wdt977.c

467

pr_err("cannot register reboot notifier (err=%d)\n", rc);

drivers/watchdog/wdt977.c

473

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/wdt_pci.c

609

pr_err("This driver only supports one device\n");

drivers/watchdog/wdt_pci.c

614

pr_err("unknown card type '%d'\n", type);

drivers/watchdog/wdt_pci.c

619

pr_err("Not possible to enable PCI Device\n");

drivers/watchdog/wdt_pci.c

624

pr_err("No I/O-Address for card detected\n");

drivers/watchdog/wdt_pci.c

630

pr_err("I/O address 0x%llx already in use\n",

drivers/watchdog/wdt_pci.c

640

pr_err("IRQ %d is not free\n", irq);

drivers/watchdog/wdt_pci.c

657

pr_err("cannot register reboot notifier (err=%d)\n", ret);

drivers/watchdog/wdt_pci.c

664

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/wdt_pci.c

672

pr_err("cannot register miscdev on minor=%d (err=%d)\n",

drivers/watchdog/wm8350_wdt.c

145

pr_err("No driver data supplied\n");

drivers/xen/balloon.c

256

pr_err("Cannot allocate new System RAM resource\n");

drivers/xen/balloon.c

776

pr_err("xen-balloon thread could not be started, ballooning will not work!\n");

drivers/xen/cpu_hotplug.c

43

pr_err("Unable to read cpu state\n");

drivers/xen/cpu_hotplug.c

52

pr_err("unknown state(%s) on CPU%d\n", state, cpu);

drivers/xen/events/events_base.c

2193

pr_err("Request for Xen HVM callback vector failed\n");

drivers/xen/events/events_base.c

896

pr_err("irq%d: Failed to set port to irq mapping (%d)\n", info->irq,

drivers/xen/events/events_fifo.c

183

pr_err("unable to expand event array (%d)\n", ret);

drivers/xen/evtchn.c

714

pr_err("Could not register /dev/xen/evtchn\n");

drivers/xen/gntalloc.c

500

pr_err("%s: Mapping must be shared\n", __func__);

drivers/xen/gntalloc.c

577

pr_err("Could not register misc gntalloc device\n");

drivers/xen/gntdev.c

1180

pr_err("Could not register gntdev device\n");

drivers/xen/gntdev.c

436

pr_err("%s: live_grants became negative (%d) after unmapping %d pages!\n",

drivers/xen/grant-table.c

1166

pr_err("%s: %s eagain grant\n", func, current->comm);

drivers/xen/manage.c

101

pr_err("%s: failed to take system_transition_mutex\n", __func__);

drivers/xen/manage.c

107

pr_err("%s: freeze processes failed %d\n", __func__, err);

drivers/xen/manage.c

113

pr_err("%s: freeze kernel threads failed %d\n", __func__, err);

drivers/xen/manage.c

119

pr_err("%s: dpm_suspend_start %d\n", __func__, err);

drivers/xen/manage.c

128

pr_err("dpm_suspend_end failed: %d\n", err);

drivers/xen/manage.c

150

pr_err("failed to start xen_suspend: %d\n", err);

drivers/xen/manage.c

294

pr_err("Error %d reading sysrq code in control/sysrq\n",

drivers/xen/manage.c

303

pr_err("%s: Error %d writing sysrq in control/sysrq\n",

drivers/xen/manage.c

342

pr_err("Failed to set shutdown watcher\n");

drivers/xen/manage.c

350

pr_err("Failed to set sysrq watcher\n");

drivers/xen/manage.c

362

pr_err("%s: Error %d writing %s\n", __func__,

drivers/xen/manage.c

66

pr_err("%s: system core suspend failed: %d\n", __func__, err);

drivers/xen/mcelog.c

303

pr_err("Failed to fetch %surgent error log\n",

drivers/xen/mcelog.c

319

pr_err("Failed to ack previous error log\n");

drivers/xen/mcelog.c

338

pr_err("Failed to handle urgent mc_info queue, continue handling nonurgent mc_info queue anyway\n");

drivers/xen/mcelog.c

343

pr_err("Failed to handle nonurgent mc_info queue\n");

drivers/xen/mcelog.c

370

pr_err("Failed to get CPU numbers\n");

drivers/xen/mcelog.c

382

pr_err("Failed to get CPU info\n");

drivers/xen/mcelog.c

390

pr_err("Failed to bind virq\n");

drivers/xen/pcpu.c

420

pr_err("sanitize of _PDC buffer bits from Xen failed: %d\n",

drivers/xen/privcmd.c

1261

pr_err("Failed to find vma for ioreq page!\n");

drivers/xen/privcmd.c

1323

pr_err("Invalid ioeventfd configuration mismatch, dom (%u vs %u), vcpus (%u vs %u)\n",

drivers/xen/privcmd.c

1449

pr_err("Ioeventfd isn't already assigned, dom: %u, addr: %llu\n",

drivers/xen/privcmd.c

1695

pr_err("No target domain found, blocking all hypercalls\n");

drivers/xen/privcmd.c

1741

pr_err("Could not register Xen privcmd device\n");

drivers/xen/privcmd.c

1747

pr_err("Could not register Xen hypercall-buf device\n");

drivers/xen/privcmd.c

1753

pr_err("irqfd init failed\n");

drivers/xen/privcmd.c

939

pr_err("Failed to configure irq for guest domain: %d\n",

drivers/xen/unpopulated-alloc.c

126

pr_err("Cannot remap memory range\n");

drivers/xen/unpopulated-alloc.c

245

pr_err("xen:unpopulated: Cannot initialize target resource\n");

drivers/xen/unpopulated-alloc.c

59

pr_err("Cannot allocate new IOMEM resource\n");

drivers/xen/unpopulated-alloc.c

81

pr_err("Cannot request resource %pR (%d)\n", tmp_res, ret);

drivers/xen/xen-acpi-processor.c

127

pr_err("(CX): Hypervisor error (%d) for ACPI CPU%u\n",

drivers/xen/xen-balloon.c

119

pr_err("Failed to set balloon watcher\n");

drivers/xen/xen-pciback/pci_stub.c

1650

pr_err("Error parsing pci_devs_to_hide at \"%s\"\n",

drivers/xen/xen-scsiback.c

1053

pr_err("xenbus_printf error %s\n", state);

drivers/xen/xen-scsiback.c

1071

pr_err("xenbus_printf error %s\n", state);

drivers/xen/xen-scsiback.c

1145

pr_err("xenbus_printf error %s\n", str);

drivers/xen/xen-scsiback.c

1379

pr_err("Unable to locate prefix for emulated Target Port: %s\n", name);

drivers/xen/xen-scsiback.c

1385

pr_err("Emulated %s Address: %s, exceeds max: %d\n", name,

drivers/xen/xen-scsiback.c

1489

pr_err("param alias: %s, exceeds max: %d\n", page,

drivers/xen/xen-scsiback.c

1575

pr_err("Unable to remove xen-pvscsi I_T Nexus with active TPG port count: %d\n",

drivers/xen/xen-scsiback.c

1582

pr_err("Unable to remove xen-pvscsi I_T Nexus with active TPG frontend count: %d\n",

drivers/xen/xen-scsiback.c

1645

pr_err("Emulated NAA Sas Address: %s, exceeds max: %d\n",

drivers/xen/xen-scsiback.c

1654

pr_err("Passed SAS Initiator Port %s does not match target port protoid: %s\n",

drivers/xen/xen-scsiback.c

1664

pr_err("Passed FCP Initiator Port %s does not match target port protoid: %s\n",

drivers/xen/xen-scsiback.c

1674

pr_err("Passed iSCSI Initiator Port %s does not match target port protoid: %s\n",

drivers/xen/xen-scsiback.c

1681

pr_err("Unable to locate prefix for emulated Initiator Port: %s\n",

drivers/xen/xen-scsiback.c

1874

pr_err("%s: error %d\n", __func__, ret);

drivers/xen/xen-scsiback.c

223

pr_err("[%s:%d] cmnd[0]=%02x -> st=%02x msg=%02x host=%02x\n",

drivers/xen/xen-scsiback.c

450

pr_err("invalid buffer -- could not remap it\n");

drivers/xen/xen-scsiback.c

473

pr_err("no grant page\n");

drivers/xen/xen-scsiback.c

682

pr_err("Unable to obtain tag for vscsiif_request\n");

drivers/xen/xen-scsiback.c

935

pr_err("illegal format of physical device %s\n", phy);

drivers/xen/xen-scsiback.c

942

pr_err("lun number not valid: %s\n", lunp);

drivers/xen/xen-scsiback.c

972

pr_err("%s:%llu %s\n", phy, unpacked_lun, error);

drivers/xen/xenbus/xenbus_comms.c

442

pr_err("request ring is not quiescent (%08x:%08x)!\n",

drivers/xen/xenbus/xenbus_comms.c

462

pr_err("request irq failed %i\n", err);

drivers/xen/xenbus/xenbus_dev_backend.c

131

pr_err("Could not register xenbus backend device\n");

drivers/xen/xenbus/xenbus_dev_frontend.c

721

pr_err("Could not register xenbus frontend device\n");

drivers/xen/xenbus/xenbus_probe.c

1055

pr_err("%s: cannot handle HVM_PARAM_STORE_PFN=%llx > ULONG_MAX\n",

drivers/xen/xenbus/xenbus_probe.c

1066

pr_err("%s: cannot map HVM_PARAM_STORE_PFN=%llx\n",

drivers/xen/xenbus/xenbus_probe.c

1080

pr_err("xenstore_late_init couldn't bind irq err=%d\n",

drivers/zorro/zorro.c

147

pr_err("Zorro: Error registering zorro_bus\n");

fs/9p/cache.c

42

pr_err("Cache volume key already in use (%s)\n", name);

fs/9p/v9fs.c

712

pr_err("Failed to register v9fs for caching\n");

fs/9p/v9fs.c

718

pr_err("Failed to register with sysfs\n");

fs/9p/v9fs.c

723

pr_err("Failed to register filesystem\n");

fs/affs/bitmap.c

270

pr_err("Bitmap allocation failed\n");

fs/affs/bitmap.c

284

pr_err("Cannot read bitmap\n");

fs/affs/bitmap.c

306

pr_err("Cannot read bitmap extension\n");

fs/affs/super.c

410

pr_err("No valid root block on device %s\n", sb->s_id);

fs/affs/super.c

422

pr_err("Cannot read boot block\n");

fs/affs/super.c

471

pr_err("Unknown filesystem on device %s: %08X\n",

fs/affs/super.c

509

pr_err("AFFS: Get root inode failed\n");

fs/afs/addr_list.c

275

pr_err("Failed to parse DNS data %ld\n", PTR_ERR(vllist));

fs/afs/cm_security.c

314

pr_err("Appdata size incorrect %lx != %zx\n",

fs/afs/dir.c

470

pr_err("Mis-iteration prog=%zx len=%zx\n",

fs/afs/mntpt.c

114

pr_err("kAFS: unable to lookup cell '%pd'\n", mntpt);

fs/afs/rxrpc.c

582

pr_err("kAFS: Call %u in bad state %u\n",

fs/afs/rxrpc.c

83

pr_err("Couldn't create RxGK CM key: %d\n", ret);

fs/afs/super.c

296

pr_err("kAFS: unable to lookup cell '%*.*s'\n",

fs/afs/volume.c

327

pr_err("AFS: Cache volume key already in use (%s)\n", name);

fs/afs/yfsclient.c

143

pr_err("kAFS: %s: Request buffer overflow (%zu>%u)\n",

fs/autofs/dev-ioctl.c

800

pr_err("misc_register failed for control device\n");

fs/befs/debug.c

37

pr_err("(%s): %pV\n", sb->s_id, &vaf);

fs/binfmt_flat.c

318

pr_err("reloc outside program 0x%lx (0 - 0x%lx/0x%lx)",

fs/binfmt_flat.c

371

pr_err("Unknown relocation type=%x\n", r.reloc.type);

fs/binfmt_flat.c

453

pr_err("bad flat file version 0x%x (supported 0x%lx and 0x%lx)\n",

fs/binfmt_flat.c

469

pr_err("bad flat file version 0x%x (supported 0x%lx)\n",

fs/binfmt_flat.c

482

pr_err("bad header\n");

fs/binfmt_flat.c

489

pr_err("Support for ZFLAT executables is not enabled.\n");

fs/binfmt_flat.c

541

pr_err("Unable to mmap process text, errno %d\n", ret);

fs/binfmt_flat.c

555

pr_err("Unable to allocate RAM for process data, "

fs/binfmt_flat.c

580

pr_err("Unable to read data+bss, errno %d\n", ret);

fs/binfmt_flat.c

602

pr_err("Unable to allocate RAM for process text/data, "

fs/binfmt_flat.c

683

pr_err("Unable to read code+data+bss, errno %d\n", ret);

fs/btrfs/messages.h

147

pr_err("assertion failed: %s :: %ld, in %s:%d\n", \

fs/btrfs/messages.h

150

pr_err("assertion failed: %s :: %ld, in %s:%d (" __FIRST_ARG(args) ")\n", \

fs/btrfs/tests/btrfs-tests.h

17

#define test_err(fmt, ...) pr_err("BTRFS: selftest: %s:%d " fmt "\n", \

fs/cachefiles/cache.c

177

pr_err("Failed to register: %d\n", ret);

fs/cachefiles/daemon.c

397

pr_err("Free space limits must be in range 0%%<=stop<cull<run<100%%\n");

fs/cachefiles/daemon.c

557

pr_err("Empty directory specified\n");

fs/cachefiles/daemon.c

562

pr_err("Second cache directory specified\n");

fs/cachefiles/daemon.c

585

pr_err("Empty security context specified\n");

fs/cachefiles/daemon.c

590

pr_err("Second security context specified\n");

fs/cachefiles/daemon.c

613

pr_err("Empty tag specified\n");

fs/cachefiles/daemon.c

644

pr_err("cull applied to unready cache\n");

fs/cachefiles/daemon.c

649

pr_err("cull applied to dead cache\n");

fs/cachefiles/daemon.c

668

pr_err("cull command requires dirfd to be a directory\n");

fs/cachefiles/daemon.c

672

pr_err("cull command requires dirfd and filename\n");

fs/cachefiles/daemon.c

695

pr_err("debug command requires mask\n");

fs/cachefiles/daemon.c

715

pr_err("inuse applied to unready cache\n");

fs/cachefiles/daemon.c

720

pr_err("inuse applied to dead cache\n");

fs/cachefiles/daemon.c

739

pr_err("inuse command requires dirfd to be a directory\n");

fs/cachefiles/daemon.c

743

pr_err("inuse command requires dirfd and filename\n");

fs/cachefiles/daemon.c

772

pr_err("No cache directory specified\n");

fs/cachefiles/daemon.c

778

pr_err("Cache already bound\n");

fs/cachefiles/daemon.c

786

pr_err("Invalid argument to the 'bind' command\n");

fs/cachefiles/daemon.c

790

pr_err("'bind' command doesn't take an argument\n");

fs/cachefiles/internal.h

430

pr_err("I/O Error: " FMT"\n", ##__VA_ARGS__); \

fs/cachefiles/internal.h

498

pr_err("\n"); \

fs/cachefiles/internal.h

499

pr_err("Assertion failed\n"); \

fs/cachefiles/internal.h

507

pr_err("\n"); \

fs/cachefiles/internal.h

508

pr_err("Assertion failed\n"); \

fs/cachefiles/internal.h

509

pr_err("%lx " #OP " %lx is false\n", \

fs/cachefiles/internal.h

518

pr_err("\n"); \

fs/cachefiles/internal.h

519

pr_err("Assertion failed\n"); \

fs/cachefiles/internal.h

527

pr_err("\n"); \

fs/cachefiles/internal.h

528

pr_err("Assertion failed\n"); \

fs/cachefiles/internal.h

529

pr_err("%lx " #OP " %lx is false\n", \

fs/cachefiles/io.c

757

pr_err("failed to get cres->file\n");

fs/cachefiles/main.c

75

pr_err("failed to register: %d\n", ret);

fs/cachefiles/namei.c

172

pr_err("%s is not a directory\n", dirname);

fs/cachefiles/namei.c

201

pr_err("mkdir %s failed with error %d\n", dirname, ret);

fs/cachefiles/namei.c

206

pr_err("Lookup %s failed with error %d\n", dirname, ret);

fs/cachefiles/namei.c

641

pr_err("%pd is not a file\n", dentry);

fs/cachefiles/namei.c

775

pr_err("Internal error: %d\n", ret);

fs/cachefiles/namei.c

830

pr_err("Internal error: %d\n", ret);

fs/cachefiles/ondemand.c

173

pr_err("Empty id specified\n");

fs/cachefiles/ondemand.c

180

pr_err("Cache size is not specified\n");

fs/cachefiles/ondemand.c

630

pr_err("WANT_CACHE_SIZE is needed for on-demand mode\n");

fs/cachefiles/security.c

33

pr_err("Security denies permission to nominate security context: error %d\n",

fs/cachefiles/security.c

56

pr_err("Security denies permission to make dirs: error %d",

fs/cachefiles/security.c

63

pr_err("Security denies permission to create files: error %d",

fs/ceph/mds_client.c

1451

pr_err("ENOMEM creating session %s msg\n",

fs/ceph/mds_client.c

404

pr_err("problem parsing mds trace %d\n", err);

fs/ceph/mds_client.c

6490

pr_err("unable to allocate msg type %d len %d\n",

fs/ceph/super.c

1664

pr_err("Failed to parse sending metrics switch value '%s'\n",

fs/char_dev.c

107

pr_err("CHRDEV \"%s\" major requested (%u) is greater than the maximum (%u)\n",

fs/char_dev.c

113

pr_err("CHRDEV \"%s\" minor range requested (%u-%u) is out of range of maximum range (%u-%u) for a single major\n",

fs/char_dev.c

127

pr_err("CHRDEV \"%s\" dynamic allocation region is full\n",

fs/coda/dir.c

377

pr_err("%s: read dir %s failed %d\n",

fs/coda/dir.c

385

pr_err("%s: short read on %s\n",

fs/coda/dir.c

392

pr_err("%s: invalid dir %s\n",

fs/coda/dir.c

50

pr_err("name too long: lookup, %s %zu\n",

fs/coda/psdev.c

360

pr_err("%s: unable to get major %d\n",

fs/configfs/dir.c

1947

pr_err("Tried to unregister non-subsystem!\n");

fs/configfs/dir.c

1961

pr_err("Tried to unregister non-empty subsystem!\n");

fs/configfs/mount.c

156

pr_err("Unable to register filesystem!\n");

fs/cramfs/inode.c

652

pr_err("unable to get direct memory access to mtd:%s\n",

fs/cramfs/inode.c

670

pr_err("unable to get direct memory access to mtd:%s\n",

fs/cramfs/inode.c

899

pr_err("bad data blocksize %u\n", block_len);

fs/cramfs/uncompress.c

43

pr_err("zlib_inflateReset error %d\n", err);

fs/cramfs/uncompress.c

54

pr_err("Error %d while decompressing!\n", err);

fs/cramfs/uncompress.c

55

pr_err("%p(%d)->%p(%d)\n", src, srclen, dst, dstlen);

fs/debugfs/inode.c

382

pr_err("Unable to pin filesystem for file '%s'\n", name);

fs/debugfs/inode.c

397

pr_err("'%s' already exists in '%pd'\n", name, parent);

fs/debugfs/inode.c

435

pr_err("out of free dentries, can not create file '%s'\n",

fs/debugfs/inode.c

580

pr_err("out of free dentries, can not create directory '%s'\n",

fs/debugfs/inode.c

622

pr_err("out of free dentries, can not create automount '%s'\n",

fs/debugfs/inode.c

680

pr_err("out of free dentries, can not create symlink '%s'\n",

fs/devpts/inode.c

272

pr_err("Unable to alloc dentry for ptmx node\n");

fs/devpts/inode.c

282

pr_err("Unable to alloc inode for ptmx node\n");

fs/devpts/inode.c

386

pr_err("get root dentry failed\n");

fs/ecryptfs/main.c

537

pr_err("eCryptfs: maximum fs stacking depth exceeded\n");

fs/efivarfs/super.c

391

pr_err("Firmware does not support SetVariableRT. Can not remount with rw\n");

fs/efs/dir.c

50

pr_err("%s(): failed to read dir block %d\n",

fs/efs/dir.c

58

pr_err("%s(): invalid directory block\n", __func__);

fs/efs/inode.c

219

pr_err("%s() failed to map (1 extent)\n", __func__);

fs/efs/inode.c

237

pr_err("%s() failed to map block %u (dir)\n", __func__, block);

fs/efs/inode.c

264

pr_err("couldn't find direct extent for indirect extent %d (block %u)\n",

fs/efs/inode.c

282

pr_err("%s() failed at block %d\n",

fs/efs/inode.c

297

pr_err("extent %d has bad magic number in block %d\n",

fs/efs/inode.c

310

pr_err("%s() failed to map block %u (indir)\n", __func__, block);

fs/efs/namei.c

35

pr_err("%s(): failed to read dir block %d\n",

fs/efs/namei.c

43

pr_err("%s(): invalid directory block\n", __func__);

fs/efs/super.c

255

pr_err("device does not support %d byte blocks\n",

fs/efs/super.c

265

pr_err("cannot read volume header\n");

fs/efs/super.c

283

pr_err("cannot read superblock\n");

fs/efs/super.c

307

pr_err("get root inode failed\n");

fs/efs/super.c

313

pr_err("get root dentry failed\n");

fs/exfat/exfat_fs.h

564

pr_err("exFAT-fs (%s): " fmt "\n", (sb)->s_id, ##__VA_ARGS__)

fs/ext4/ext4_jbd2.c

371

pr_err("EXT4: jbd2_journal_dirty_metadata "

fs/fs_parser.c

399

pr_err("VALIDATE %s: PARAM[%s]: Duplicate\n",

fs/fuse/cuse.c

230

pr_err("info not properly terminated\n");

fs/fuse/cuse.c

247

pr_err("zero length info key specified\n");

fs/fuse/cuse.c

291

pr_err("DEVNAME unspecified\n");

fs/fuse/cuse.c

359

pr_err("failed to register chrdev region\n");

fs/fuse/dev_uring.c

676

pr_err("qid=%d ring-req=%p invalid state %d on send\n",

fs/fuse/virtio_fs.c

1510

pr_err("virtio-fs: virtio_fs_enqueue_req() failed %d\n", ret);

fs/fuse/virtio_fs.c

1577

pr_err("virtio-fs: dax can't be enabled as filesystem"

fs/fuse/virtio_fs.c

606

pr_err("virtio-fs: virtio_fs_enqueue_req() failed %d\n",

fs/gfs2/glock.c

1396

pr_err("%pV", &vaf);

fs/gfs2/util.h

24

pr_err("fsid=%s: " fmt, (fs)->sd_fsname, ##__VA_ARGS__)

fs/hfs/bfind.c

162

pr_err("inconsistency in B*Tree (%d,%d,%d,%u,%u)\n",

fs/hfs/bnode.c

128

pr_err("hfs: Invalid key length: %u\n", key_len);

fs/hfs/bnode.c

143

pr_err("requested zero length: "

fs/hfs/bnode.c

181

pr_err("requested zero length: "

fs/hfs/bnode.c

24

pr_err("requested invalid offset: "

fs/hfs/bnode.c

329

pr_err("request for non-existent node %d in B*Tree\n", cnid);

fs/hfs/bnode.c

351

pr_err("request for non-existent node %d in B*Tree\n", cnid);

fs/hfs/bnode.c

47

pr_err("requested length has been corrected: "

fs/hfs/bnode.c

71

pr_err("requested zero length: "

fs/hfs/brec.c

51

pr_err("keylen %d too large\n", retval);

fs/hfs/brec.c

57

pr_err("keylen %d too large\n", retval);

fs/hfs/btree.c

136

pr_err("invalid extent max_key_len %d\n",

fs/hfs/btree.c

143

pr_err("invalid catalog max_key_len %d\n",

fs/hfs/btree.c

186

pr_err("node %d:%d still has %d user(s)!\n",

fs/hfs/btree.c

56

pr_err("invalid btree extent records\n");

fs/hfs/btree.c

68

pr_err("invalid btree extent records (0 size)\n");

fs/hfs/btree.c

98

pr_err("unable to read tree header\n");

fs/hfs/catalog.c

200

pr_err("found bad thread record in catalog\n");

fs/hfs/catalog.c

207

pr_err("bad catalog namelength\n");

fs/hfs/catalog.c

254

pr_err("node is corrupted: leaf_head %lld, leaf_tail %lld\n",

fs/hfs/catalog.c

261

pr_err("fail to find leaf node: node ID %lld\n",

fs/hfs/catalog.c

292

pr_err("fail to get the keylen: "

fs/hfs/catalog.c

302

pr_err("unexpected record length: "

fs/hfs/dir.c

106

pr_err("walked past end of dir\n");

fs/hfs/dir.c

121

pr_err("small dir entry\n");

fs/hfs/dir.c

130

pr_err("small file entry\n");

fs/hfs/dir.c

138

pr_err("bad catalog entry type %d\n", type);

fs/hfs/dir.c

265

pr_err("cannot remove file/folder\n");

fs/hfs/dir.c

84

pr_err("bad catalog folder thread\n");

fs/hfs/inode.c

204

pr_err("cannot create new inode: next CNID exceeds limit\n");

fs/hfs/inode.c

222

pr_err("cannot create new inode: folder count exceeds limit\n");

fs/hfs/inode.c

236

pr_err("cannot create new inode: file count exceeds limit\n");

fs/hfs/mdb.c

131

pr_err("bad allocation block size %d\n", size);

fs/hfs/mdb.c

149

pr_err("unable to set blocksize to %u\n", size);

fs/hfs/mdb.c

216

pr_err("unable to read volume bitmap\n");

fs/hfs/mdb.c

230

pr_err("unable to open extent tree\n");

fs/hfs/mdb.c

235

pr_err("unable to open catalog tree\n");

fs/hfs/mdb.c

346

pr_err("unable to read volume bitmap\n");

fs/hfs/mdb.c

51

pr_err("invalid session number or type of track\n");

fs/hfs/super.c

259

pr_err("type requires a 4 character value\n");

fs/hfs/super.c

266

pr_err("creator requires a 4 character value\n");

fs/hfs/super.c

276

pr_err("unable to change codepage\n");

fs/hfs/super.c

281

pr_err("unable to load codepage \"%s\"\n",

fs/hfs/super.c

288

pr_err("unable to change iocharset\n");

fs/hfs/super.c

293

pr_err("unable to load iocharset \"%s\"\n",

fs/hfs/super.c

387

pr_err("get root inode failed\n");

fs/hfsplus/attributes.c

147

pr_err("attributes file doesn't exist\n");

fs/hfsplus/attributes.c

262

pr_err("attributes file doesn't exist\n");

fs/hfsplus/attributes.c

314

pr_err("only inline data xattr are supported\n");

fs/hfsplus/attributes.c

317

pr_err("invalid extended attribute record\n");

fs/hfsplus/attributes.c

349

pr_err("invalid extended attribute name\n");

fs/hfsplus/attributes.c

374

pr_err("attributes file doesn't exist\n");

fs/hfsplus/attributes.c

404

pr_err("attributes file doesn't exist\n");

fs/hfsplus/attributes.c

416

pr_err("xattr search failed\n");

fs/hfsplus/attributes.c

443

pr_err("attributes file doesn't exist\n");

fs/hfsplus/bfind.c

205

pr_err("inconsistency in B*Tree (%d,%d,%d,%u,%u)\n",

fs/hfsplus/bnode.c

103

pr_err("requested zero length: "

fs/hfsplus/bnode.c

145

pr_err("requested zero length: "

fs/hfsplus/bnode.c

32

pr_err("requested zero length: "

fs/hfsplus/bnode.c

438

pr_err("request for non-existent node %d in B*Tree\n",

fs/hfsplus/bnode.c

459

pr_err("request for non-existent node %d in B*Tree\n",

fs/hfsplus/bnode.c

87

pr_err("hfsplus: Invalid key length: %u\n", key_len);

fs/hfsplus/brec.c

49

pr_err("recoff %d too large\n", recoff);

fs/hfsplus/brec.c

55

pr_err("keylen %d too large\n",

fs/hfsplus/btree.c

156

pr_err("invalid btree extent records (0 size)\n");

fs/hfsplus/btree.c

183

pr_err("invalid extent max_key_len %d\n",

fs/hfsplus/btree.c

188

pr_err("invalid extent btree flag\n");

fs/hfsplus/btree.c

196

pr_err("invalid catalog max_key_len %d\n",

fs/hfsplus/btree.c

201

pr_err("invalid catalog btree flag\n");

fs/hfsplus/btree.c

215

pr_err("invalid attributes max_key_len %d\n",

fs/hfsplus/btree.c

222

pr_err("unknown B*Tree requested\n");

fs/hfsplus/btree.c

227

pr_err("invalid btree flag\n");

fs/hfsplus/catalog.c

208

pr_err("found bad thread record in catalog\n");

fs/hfsplus/catalog.c

213

pr_err("catalog name length corrupted\n");

fs/hfsplus/dir.c

113

pr_err("invalid catalog entry type in lookup\n");

fs/hfsplus/dir.c

172

pr_err("bad catalog folder thread\n");

fs/hfsplus/dir.c

177

pr_err("truncated catalog thread\n");

fs/hfsplus/dir.c

193

pr_err("walked past end of dir\n");

fs/hfsplus/dir.c

213

pr_err("small dir entry\n");

fs/hfsplus/dir.c

229

pr_err("small file entry\n");

fs/hfsplus/dir.c

252

pr_err("bad catalog entry type\n");

fs/hfsplus/extents.c

362

pr_err("can't free extent: start %u, count %u\n",

fs/hfsplus/extents.c

372

pr_err("can't free extent: start %u, count %u\n",

fs/hfsplus/hfsplus_fs.h

561

pr_err("requested invalid offset: "

fs/hfsplus/hfsplus_fs.h

584

pr_err("requested length has been corrected: "

fs/hfsplus/inode.c

233

pr_err("invalid file type 0%04o for inode %lu\n", mode, inode->i_ino);

fs/hfsplus/inode.c

365

pr_err("sync non-existent attributes tree\n");

fs/hfsplus/inode.c

563

pr_err("bad catalog folder entry\n");

fs/hfsplus/inode.c

591

pr_err("bad catalog file entry\n");

fs/hfsplus/inode.c

627

pr_err("bad catalog entry used to create inode\n");

fs/hfsplus/inode.c

662

pr_err("bad catalog folder entry\n");

fs/hfsplus/inode.c

691

pr_err("bad catalog file entry\n");

fs/hfsplus/inode.c

719

pr_err("b-tree write err: %d, ino %lu\n",

fs/hfsplus/options.c

115

pr_err("unable to change nls mapping\n");

fs/hfsplus/options.c

120

pr_err("unable to load nls mapping \"%s\"\n",

fs/hfsplus/options.c

84

pr_err("creator requires a 4 character value\n");

fs/hfsplus/options.c

91

pr_err("type requires a 4 character value\n");

fs/hfsplus/super.c

159

pr_err("b-tree write err: %d, ino %lu\n",

fs/hfsplus/super.c

300

pr_err("delayed sync fs err %d\n", err);

fs/hfsplus/super.c

457

pr_err("unable to load nls for utf8\n");

fs/hfsplus/super.c

473

pr_err("wrong filesystem version\n");

fs/hfsplus/super.c

497

pr_err("filesystem size too large\n");

fs/hfsplus/super.c

524

pr_err("failed to load extents file\n");

fs/hfsplus/super.c

529

pr_err("failed to load catalog file\n");

fs/hfsplus/super.c

536

pr_err("failed to load attributes file\n");

fs/hfsplus/super.c

545

pr_err("failed to load allocation file\n");

fs/hfsplus/super.c

554

pr_err("failed to load root directory\n");

fs/hfsplus/unicode.c

101

pr_err("invalid length %u has been corrected to %d\n",

fs/hfsplus/unicode.c

167

pr_err("invalid length %u has been corrected to %d\n",

fs/hfsplus/unicode.c

48

pr_err("invalid length %u has been corrected to %d\n",

fs/hfsplus/unicode.c

54

pr_err("invalid length %u has been corrected to %d\n",

fs/hfsplus/unicode.c

95

pr_err("invalid length %u has been corrected to %d\n",

fs/hfsplus/wrapper.c

117

pr_err("invalid session number or type of track\n");

fs/hfsplus/wrapper.c

223

pr_err("unable to set blocksize to %u!\n", blocksize);

fs/hfsplus/xattr.c

171

pr_err("failed to load attributes file\n");

fs/hfsplus/xattr.c

177

pr_err("detected inconsistent attributes file, running fsck.hfsplus is recommended.\n");

fs/hfsplus/xattr.c

200

pr_err("failed to extend attributes file\n");

fs/hfsplus/xattr.c

243

pr_err("failed to load attributes file\n");

fs/hfsplus/xattr.c

292

pr_err("can't init xattr find struct\n");

fs/hfsplus/xattr.c

298

pr_err("catalog searching failed\n");

fs/hfsplus/xattr.c

304

pr_err("xattr exists yet\n");

fs/hfsplus/xattr.c

351

pr_err("xattr exists yet\n");

fs/hfsplus/xattr.c

362

pr_err("cannot replace xattr\n");

fs/hfsplus/xattr.c

397

pr_err("invalid catalog entry type\n");

fs/hfsplus/xattr.c

430

pr_err("fail to copy name: err %zd\n", len);

fs/hfsplus/xattr.c

484

pr_err("can't init xattr find struct\n");

fs/hfsplus/xattr.c

540

pr_err("can't allocate xattr entry\n");

fs/hfsplus/xattr.c

546

pr_err("can't init xattr find struct\n");

fs/hfsplus/xattr.c

555

pr_err("xattr searching failed\n");

fs/hfsplus/xattr.c

568

pr_err("invalid xattr record size\n");

fs/hfsplus/xattr.c

574

pr_err("only inline data xattr are supported\n");

fs/hfsplus/xattr.c

578

pr_err("invalid xattr record\n");

fs/hfsplus/xattr.c

655

pr_err("can't init xattr find struct\n");

fs/hfsplus/xattr.c

733

pr_err("can't init xattr find struct\n");

fs/hfsplus/xattr.c

760

pr_err("invalid xattr key length: %d\n", key_len);

fs/hfsplus/xattr.c

775

pr_err("unicode conversion failed\n");

fs/hfsplus/xattr.c

785

pr_err("size %zu, res %zd, name_len %zu\n",

fs/hfsplus/xattr.c

833

pr_err("can't init xattr find struct\n");

fs/hfsplus/xattr.c

839

pr_err("catalog searching failed\n");

fs/hfsplus/xattr.c

878

pr_err("invalid catalog entry type\n");

fs/hpfs/buffer.c

107

pr_err("%s(): getblk failed\n", __func__);

fs/hpfs/buffer.c

124

pr_err("%s(): unaligned read\n", __func__);

fs/hpfs/buffer.c

143

pr_err("%s(): out of memory\n", __func__);

fs/hpfs/buffer.c

176

pr_err("%s(): unaligned read\n", __func__);

fs/hpfs/buffer.c

192

pr_err("%s(): out of memory\n", __func__);

fs/hpfs/buffer.c

86

pr_err("%s(): read error\n", __func__);

fs/hpfs/dir.c

135

pr_err("pos==%d\n", (int)ctx->pos);

fs/hpfs/dnode.c

101

pr_err("%s(): %08x + %d\n",

fs/hpfs/dnode.c

1014

pr_err("out of memory, can't map dirent\n");

fs/hpfs/dnode.c

113

pr_err("%s(): %08x - %d\n",

fs/hpfs/dnode.c

253

pr_err("out of memory, can't add to dnode\n");

fs/hpfs/dnode.c

295

pr_err("out of memory for dnode splitting\n");

fs/hpfs/dnode.c

38

pr_err("out of memory for position list\n");

fs/hpfs/dnode.c

611

pr_err("out of memory for dtree balancing\n");

fs/hpfs/dnode.c

652

pr_err("unbalanced dnode tree, see hpfs.txt 4 more info\n");

fs/hpfs/dnode.c

653

pr_err("terminating balancing operation\n");

fs/hpfs/dnode.c

659

pr_err("unbalanced dnode tree, see hpfs.txt 4 more info\n");

fs/hpfs/dnode.c

660

pr_err("goin'on\n");

fs/hpfs/dnode.c

674

pr_err("out of memory for dtree balancing\n");

fs/hpfs/ea.c

143

pr_err("out of memory for EA\n");

fs/hpfs/ea.c

169

pr_err("out of memory for EA\n");

fs/hpfs/ea.c

55

pr_err("out of memory for EA\n");

fs/hpfs/inode.c

189

pr_err("write_inode: some position still there\n");

fs/hpfs/map.c

119

pr_err("can't allocate memory for bitmap directory\n");

fs/hpfs/map.c

313

pr_err("unbalanced dnode tree, dnode %08x; see hpfs.txt 4 more info\n",

fs/hpfs/map.c

69

pr_err("Code page directory magic doesn't match (magic = %08x)\n",

fs/hpfs/map.c

75

pr_err("n_code_pages == 0\n");

fs/hpfs/map.c

84

pr_err("Code page index out of array\n");

fs/hpfs/map.c

90

pr_err("Code page index out of sector\n");

fs/hpfs/map.c

96

pr_err("out of memory for code page table\n");

fs/hpfs/name.c

60

pr_err("Long name flag mismatch - name ");

fs/hpfs/name.c

64

pr_err("It's nothing serious. It could happen because of bug in OS/2.\nSet checks=normal to disable this message.\n");

fs/hpfs/name.c

68

pr_err("can't allocate memory for name conversion buffer\n");

fs/hpfs/super.c

436

pr_err("timeshift can't be changed using remount.\n");

fs/hpfs/super.c

537

pr_err("Bad magic ... probably not HPFS\n");

fs/hpfs/super.c

543

pr_err("Bad version %d,%d. Mount readonly to go around\n",

fs/hpfs/super.c

545

pr_err("please try recent version of HPFS driver at http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi and if it still can't understand this format, contact author - mikulas@artax.karlin.mff.cuni.cz\n");

fs/hpfs/super.c

596

pr_err("Improperly stopped, not mounted\n");

fs/hpfs/super.c

610

pr_err("Spare dnodes used, try chkdsk\n");

fs/hpfs/super.c

616

pr_err("Proceeding, but your filesystem could be corrupted if you delete files or directories\n");

fs/hpfs/super.c

636

pr_err("You really don't want any checks? You are crazy...\n");

fs/hpfs/super.c

641

pr_err("code page support is disabled\n");

fs/hpfs/super.c

69

pr_err("filesystem error: %pV", &vaf);

fs/hugetlbfs/inode.c

1349

pr_err("Unsupported page size %lu MB\n", ps / SZ_1M);

fs/hugetlbfs/inode.c

1397

pr_err("Minimum size can not be greater than maximum size\n");

fs/hugetlbfs/inode.c

1599

pr_err("Cannot mount internal hugetlbfs for page size %luK",

fs/iomap/swapfile.c

84

pr_err("swapon: file %s %s\n", IS_ERR(p) ? "<unknown>" : p, str);

fs/jbd2/journal.c

1469

pr_err("%s: Cannot read journal superblock\n", __func__);

fs/jbd2/journal.c

1676

pr_err("%s: Cannot locate journal superblock\n", __func__);

fs/jbd2/journal.c

1972

pr_err("JBD2: bad block at offset %lu", block);

fs/jbd2/journal.c

2021

pr_err("JBD2: (error %d) unable to wipe journal at physical blocks [%llu, %llu)",

fs/jbd2/journal.c

2330

pr_err("JBD2: Cannot enable fast commits.\n");

fs/jbd2/journal.c

2599

pr_err("Aborting journal on device %s.\n", journal->j_devname);

fs/jbd2/recovery.c

523

pr_err("JBD2: IO error %d recovering block %lu in log\n",

fs/jbd2/recovery.c

545

pr_err("JBD2: Invalid checksum recovering data block %llu in journal block %lu\n",

fs/jbd2/recovery.c

554

pr_err("JBD2: Out of memory during recovery.\n");

fs/jbd2/recovery.c

713

pr_err("JBD2: Invalid checksum recovering block %lu in log\n",

fs/jbd2/recovery.c

805

pr_err("JBD2: Invalid checksum found in transaction %u\n",

fs/jbd2/transaction.c

1529

pr_err("JBD2: assertion failure: h_type=%u "

fs/jffs2/compr.c

241

pr_err("unknown compression mode\n");

fs/jffs2/debug.h

80

pr_err("error: (%d) %s: " fmt, \

fs/jffs2/gc.c

471

pr_err("Error garbage collecting node at %08x!\n",

fs/jffs2/scan.c

1076

pr_err("Dirent at %08x has zeroes in name. Truncating to %d chars\n",

fs/jffs2/summary.c

447

pr_err("Dirent at %08x has zero at start of name. Aborting mount.\n",

fs/jffs2/summary.c

453

pr_err("Dirent at %08x has zeroes in name. Truncating to %d chars\n",

fs/jffs2/super.c

394

pr_err("error: Failed to initialise inode cache\n");

fs/jffs2/super.c

399

pr_err("error: Failed to initialise compressors\n");

fs/jffs2/super.c

404

pr_err("error: Failed to initialise slab caches\n");

fs/jffs2/super.c

409

pr_err("error: Failed to register filesystem\n");

fs/jffs2/wbuf.c

1048

pr_err("cannot read OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d\n",

fs/jffs2/wbuf.c

1090

pr_err("cannot read OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d\n",

fs/jffs2/wbuf.c

1115

pr_err("cannot write OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d\n",

fs/jffs2/wbuf.c

1193

pr_err("inconsistent device description\n");

fs/jfs/super.c

283

pr_err("JFS: charset not found\n");

fs/jfs/super.c

317

pr_err("JFS: quota operations not supported\n");

fs/jfs/super.c

330

pr_err("JFS: Invalid value of umask\n");

fs/jfs/super.c

386

pr_err("JFS: resize requires volume to be mounted read-write\n");

fs/jfs/super.c

393

pr_err("JFS: Cannot determine volume size\n");

fs/jfs/super.c

475

pr_err("JFS: discard option not supported on device\n");

fs/jfs/super.c

487

pr_err("resize option for remount only\n");

fs/jfs/super.c

93

pr_err("ERROR: (device %s): %ps: %pV\n",

fs/lockd/svc.c

260

pr_err("%s: no users! net=%x\n",

fs/netfs/buffered_read.c

252

pr_err("ZERO-LEN READ: R=%08x[%x] l=%zx/%zx s=%llx z=%llx i=%llx",

fs/netfs/buffered_read.c

290

pr_err("Unexpected read source %u\n", source);

fs/netfs/direct_read.c

132

pr_err("Zero-sized read [R=%x]\n", rreq->debug_id);

fs/netfs/fscache_cache.c

342

pr_err("Cache '%s' stopped due to I/O error\n",

fs/netfs/fscache_cookie.c

39

pr_err("%c-cookie c=%08x [fl=%lx na=%u nA=%u s=%c]\n",

fs/netfs/fscache_cookie.c

437

pr_err("Duplicate cookie detected\n");

fs/netfs/fscache_cookie.c

46

pr_err("%c-cookie V=%08x [%s]\n",

fs/netfs/fscache_cookie.c

53

pr_err("%c-key=[%u] '%*phN'\n", prefix, cookie->key_len, cookie->key_len, k);

fs/netfs/internal.h

493

pr_err("\n"); \

fs/netfs/internal.h

494

pr_err("Assertion failed\n"); \

fs/netfs/internal.h

502

pr_err("\n"); \

fs/netfs/internal.h

503

pr_err("Assertion failed\n"); \

fs/netfs/internal.h

504

pr_err("%lx " #OP " %lx is false\n", \

fs/netfs/internal.h

513

pr_err("\n"); \

fs/netfs/internal.h

514

pr_err("Assertion failed\n"); \

fs/netfs/internal.h

522

pr_err("\n"); \

fs/netfs/internal.h

523

pr_err("Assertion failed\n"); \

fs/netfs/internal.h

524

pr_err("%lx " #OP " %lx is false\n", \

fs/netfs/iterator.c

71

pr_err("Couldn't get user pages (rc=%zd)\n", ret);

fs/netfs/iterator.c

76

pr_err("get_pages rc=%zd more than %zu\n", ret, count);

fs/netfs/iterator.c

85

pr_err("Out of bvec array capacity (%u vs %u)\n",

fs/netfs/write_collect.c

119

pr_err("[!] Writeback unlock found empty rolling buffer!\n");

fs/netfs/write_collect.c

26

pr_err("Request R=%08x r=%d fl=%lx or=%x e=%ld\n",

fs/netfs/write_collect.c

29

pr_err(" st=%llx tsl=%zx/%llx/%llx\n",

fs/netfs/write_collect.c

31

pr_err(" cci=%llx/%llx/%llx\n",

fs/netfs/write_collect.c

33

pr_err(" iw=%pSR\n", rreq->netfs_ops->issue_write);

fs/netfs/write_collect.c

38

pr_err(" str[%x] s=%x e=%d acnf=%u,%u,%u,%u\n",

fs/netfs/write_collect.c

41

pr_err(" str[%x] ct=%llx t=%zx\n",

fs/netfs/write_collect.c

44

pr_err(" sreq[%x:%x] sc=%u s=%llx t=%zx/%zx r=%d f=%lx\n",

fs/nfs/blocklayout/dev.c

346

pr_err("pNFS: unsupported designator "

fs/nfs/blocklayout/dev.c

353

pr_err("pNFS: invalid designator "

fs/nfs/blocklayout/dev.c

427

pr_err("pNFS: block device %s does not support reservations.",

fs/nfs/fs_context.c

565

pr_err("key id %08x not found\n", key_id);

fs/nfs/fs_context.c

570

pr_err("key id %08x revoked\n", key_id);

fs/nfs/fscache.c

138

pr_err("NFS: Cache volume key already in use (%s)\n", key);

fs/nfs/nfs4state.c

1218

pr_err("NFS: volatile file handles not supported (server %s)\n",

fs/nfs/nfs4state.c

1470

pr_err("NFS: %s: unhandled error %d\n",

fs/nfs/nfs4state.c

1942

pr_err("NFS: Server %s reports our clientid is in use\n",

fs/nfs/nfs4state.c

2108

pr_err("NFS: migration recovery failed (server %s)\n",

fs/nfsd/blocklayout.c

340

pr_err("pNFS: device %s does not support PRs.\n",

fs/nfsd/blocklayout.c

347

pr_err("pNFS: failed to register key for device %s.\n",

fs/nfsd/blocklayout.c

355

pr_err("pNFS: failed to reserve device %s.\n",

fs/nfsd/filecache.c

791

pr_err("nfsd: unable to create nfsd_file_slab\n");

fs/nfsd/filecache.c

797

pr_err("nfsd: unable to create nfsd_file_mark_slab\n");

fs/nfsd/filecache.c

803

pr_err("nfsd: failed to init nfsd_file_lru: %d\n", ret);

fs/nfsd/filecache.c

810

pr_err("nfsd: failed to allocate nfsd_file_shrinker\n");

fs/nfsd/filecache.c

822

pr_err("nfsd: unable to register lease notifier: %d\n", ret);

fs/nfsd/filecache.c

829

pr_err("nfsd: unable to create fsnotify group: %ld\n",

fs/nfsd/nfs4proc.c

4055

pr_err("unable to encode reply to nonidempotent op %u (%s)\n",

fs/nfsd/nfs4recover.c

1082

pr_err("NFSD: Unable to create client record on stable storage: %d\n",

fs/orangefs/protocol.h

362

#define gossip_err pr_err

fs/overlayfs/dir.c

40

pr_err("cleanup of '%pd2' failed (%i)\n",

fs/overlayfs/params.c

1017

pr_err("redirect_dir requires permission to access trusted xattrs\n");

fs/overlayfs/params.c

1021

pr_err("metacopy requires permission to access trusted xattrs\n");

fs/overlayfs/params.c

1025

pr_err("verity requires permission to access trusted xattrs\n");

fs/overlayfs/params.c

1029

pr_err("lower data-only dirs require permission to access trusted xattrs\n");

fs/overlayfs/params.c

224

pr_err("only single ':' or double '::' sequences of unescaped colons in lowerdir mount option allowed.\n");

fs/overlayfs/params.c

239

pr_err("unescaped trailing colons in lowerdir mount option.\n");

fs/overlayfs/params.c

255

pr_err("empty lowerdir\n");

fs/overlayfs/params.c

260

pr_err("failed to resolve '%s': %i\n", name, err);

fs/overlayfs/params.c

540

pr_err("cannot append lower layer\n");

fs/overlayfs/params.c

559

pr_err("too many lower directories, limit is %d\n", OVL_MAX_STACK);

fs/overlayfs/params.c

590

pr_err("regular lower layers cannot follow data lower layers\n");

fs/overlayfs/params.c

720

pr_err("unrecognized mount option \"%s\" or missing value\n",

fs/overlayfs/params.c

916

pr_err("conflicting options: metacopy=on,redirect_dir=%s\n",

fs/overlayfs/params.c

941

pr_err("conflicting options: nfs_export=on,index=off\n");

fs/overlayfs/params.c

959

pr_err("conflicting options: nfs_export=on,metacopy=on\n");

fs/overlayfs/params.c

992

pr_err("conflicting options: userxattr,redirect_dir=%s\n",

fs/overlayfs/params.c

997

pr_err("conflicting options: userxattr,metacopy=on\n");

fs/overlayfs/readdir.c

1127

pr_err("lookup '%s/%.*s' failed (%i)\n",

fs/overlayfs/readdir.c

1212

pr_err("overlay with incompat feature '%s' cannot be mounted\n",

fs/overlayfs/readdir.c

1325

pr_err("failed index dir cleanup (%i)\n", err);

fs/overlayfs/super.c

1017

pr_err("strict encoding not supported\n");

fs/overlayfs/super.c

1052

pr_err("failed to get anonymous bdev for upper fs\n");

fs/overlayfs/super.c

1103

pr_err("failed to clone lowerpath\n");

fs/overlayfs/super.c

1133

pr_err("all layers must have the same encoding\n");

fs/overlayfs/super.c

1188

pr_err("at least 2 lowerdir are needed while upperdir nonexistent\n");

fs/overlayfs/super.c

1193

pr_err("at least one non-data lowerdir is required\n");

fs/overlayfs/super.c

1209

pr_err("maximum fs stacking depth exceeded\n");

fs/overlayfs/super.c

1256

pr_err("overlapping %s path\n", name);

fs/overlayfs/super.c

1391

pr_err("missing 'lowerdir'\n");

fs/overlayfs/super.c

1435

pr_err("missing 'workdir'\n");

fs/overlayfs/super.c

1448

pr_err("Cannot mount volatile when upperdir has an unseen error. Sync upperdir fs to clear state.\n");

fs/overlayfs/super.c

404

pr_err("statfs failed on '%s'\n", name);

fs/overlayfs/super.c

478

pr_err("conflicting %s path\n", name);

fs/overlayfs/super.c

495

pr_err("%s is in-use as upperdir/workdir of another mount, mount with '-o index=off' to override exclusive upperdir protection.\n",

fs/overlayfs/super.c

514

pr_err("upper fs is r/o, try multi-lower layers mount\n");

fs/overlayfs/super.c

531

pr_err("failed to clone upperpath\n");

fs/overlayfs/super.c

770

pr_err("upper fs missing required features.\n");

fs/overlayfs/super.c

782

pr_err("Failed to create volatile/dirty file.\n");

fs/overlayfs/super.c

817

pr_err("workdir and upperdir must reside under the same mount\n");

fs/overlayfs/super.c

821

pr_err("workdir and upperdir must be separate subtrees\n");

fs/overlayfs/super.c

863

pr_err("failed to verify upper root origin\n");

fs/overlayfs/super.c

896

pr_err("failed to verify index dir 'origin' xattr\n");

fs/overlayfs/super.c

900

pr_err("failed to verify index dir 'upper' xattr\n");

fs/overlayfs/super.c

987

pr_err("failed to get anonymous bdev for lowerpath\n");

fs/overlayfs/util.c

1137

pr_err("cleanup index of '%pd2' failed (%i)\n", dentry, err);

fs/overlayfs/util.c

1240

pr_err("failed to lock workdir+upperdir\n");

fs/proc/kcore.c

727

pr_err("couldn't create /proc/kcore\n");

fs/proc/proc_sysctl.c

1033

pr_err("sysctl could not get directory: ");

fs/proc/proc_sysctl.c

1100

pr_err("sysctl table check failed: %s/%s %pV\n",

fs/proc/proc_sysctl.c

1468

pr_err("failed when register_sysctl_sz %s to %s\n", table_name, path);

fs/proc/proc_sysctl.c

1501

pr_err("sysctl link missing during unregister: ");

fs/proc/proc_sysctl.c

1657

pr_err("Failed to find procfs to set sysctl from command line\n");

fs/proc/proc_sysctl.c

1663

pr_err("Failed to mount procfs to set sysctl from command line\n");

fs/proc/proc_sysctl.c

1677

pr_err("Failed to set sysctl parameter '%s=%s': parameter not found\n",

fs/proc/proc_sysctl.c

1680

pr_err("Failed to set sysctl parameter '%s=%s': permission denied (read-only?)\n",

fs/proc/proc_sysctl.c

1683

pr_err("Error %pe opening proc file to set sysctl parameter '%s=%s'\n",

fs/proc/proc_sysctl.c

1691

pr_err("Failed to set sysctl parameter '%s=%s': invalid value\n",

fs/proc/proc_sysctl.c

1694

pr_err("Error %pe writing to proc file to set sysctl parameter '%s=%s'\n",

fs/proc/proc_sysctl.c

1697

pr_err("Wrote only %zd bytes of %d writing to proc file %s to set sysctl parameter '%s=%s\n",

fs/proc/proc_sysctl.c

1703

pr_err("Error %pe closing proc file to set sysctl parameter '%s=%s\n",

fs/proc/proc_sysctl.c

173

pr_err("sysctl duplicate entry: ");

fs/proc/root.c

282

pr_err("proc_fill_super: get root inode failed\n");

fs/proc/root.c

288

pr_err("proc_fill_super: allocate dentry failed\n");

fs/proc/self.c

61

pr_err("proc_fill_super: can't allocate /proc/self\n");

fs/proc/thread_self.c

61

pr_err("proc_fill_super: can't allocate /proc/thread-self\n");

fs/proc/vmcore.c

1603

pr_err("too many device ram ranges\n");

fs/proc/vmcore.c

1618

pr_err("resizing elfcore failed\n");

fs/proc/vmcore.c

1656

pr_err("device ram ranges only support Elf64\n");

fs/proc/vmcore.c

1661

pr_err("obtaining device ram ranges failed\n");

fs/pstore/blk.c

104

pr_err("NULL device info\n");

fs/pstore/blk.c

108

pr_err("zero sized device\n");

fs/pstore/blk.c

112

pr_err("no read handler for device\n");

fs/pstore/blk.c

116

pr_err("no write handler for device\n");

fs/pstore/blk.c

215

pr_err("failed to open '%s': %d!\n", devpath, ret);

fs/pstore/blk.c

220

pr_err("'%s' is not block device!\n", devpath);

fs/pstore/blk.c

269

pr_err("failed to resolve '%s'!\n", initial_devname);

fs/pstore/blk.c

296

pr_err("blkdev empty with best_effort=Y\n");

fs/pstore/ftrace.c

82

pr_err("%s: unable to %sregister ftrace ops: %zd\n",

fs/pstore/platform.c

217

pr_err("Unsupported compression '%s', falling back to deflate\n",

fs/pstore/platform.c

230

pr_err("Failed %zu byte compression buffer allocation for: %s\n",

fs/pstore/platform.c

238

pr_err("Failed to allocate zlib deflate workspace\n");

fs/pstore/platform.c

293

pr_err("dump skipped in %s path because of concurrent dump\n",

fs/pstore/platform.c

608

pr_err("zlib_inflateReset() failed, ret = %d!\n", ret);

fs/pstore/platform.c

688

pr_err("out of memory creating record\n");

fs/pstore/platform.c

727

pr_err("looping? Too many records seen from '%s'\n",

fs/pstore/pmsg.c

62

pr_err("register_chrdev failed\n");

fs/pstore/pmsg.c

68

pr_err("device class file already in use\n");

fs/pstore/pmsg.c

76

pr_err("failed to create device\n");

fs/pstore/ram.c

737

pr_err("already initialized\n");

fs/pstore/ram.c

752

pr_err("NULL platform data\n");

fs/pstore/ram.c

759

pr_err("The memory size and the record/console size must be "

fs/pstore/ram.c

843

pr_err("cannot allocate pstore crash dump buffer\n");

fs/pstore/ram.c

851

pr_err("registering with pstore failed\n");

fs/pstore/ram_core.c

209

pr_err("%s: invalid ecc_size %u (total %zu, buffer size %zu)\n",

fs/pstore/ram_core.c

235

pr_err("cannot allocate ECC parity workspace\n");

fs/pstore/ram_core.c

316

pr_err("failed to allocate buffer\n");

fs/pstore/ram_core.c

437

pr_err("invalid mem_type=%d\n", memtype);

fs/pstore/ram_core.c

443

pr_err("%s: Failed to allocate array for %u pages\n",

fs/pstore/ram_core.c

480

pr_err("request mem region (%s 0x%llx@0x%llx) failed\n",

fs/pstore/ram_core.c

512

pr_err("%s: Failed to map 0x%llx pages at 0x%llx\n", __func__,

fs/pstore/ram_core.c

610

pr_err("failed to allocate persistent ram zone\n");

fs/pstore/zone.c

1164

pr_err("no room for %s (0x%zx@0x%llx over 0x%lx)\n",

fs/pstore/zone.c

1210

pr_err("no room for zones %s (0x%zx@0x%llx over 0x%lx)\n",

fs/pstore/zone.c

1217

pr_err("zone %s total_size too small\n", name);

fs/pstore/zone.c

1223

pr_err("allocate for zones %s failed\n", name);

fs/pstore/zone.c

1230

pr_err("initialize zones %s failed\n", name);

fs/pstore/zone.c

1325

pr_err(#name " must be over %d\n", (size)); \

fs/pstore/zone.c

1329

pr_err(#name " must be a multiple of %d\n", \

fs/pstore/zone.c

1349

pr_err("no valid general read/write interface\n");

fs/pstore/zone.c

1371

pr_err("alloc zones failed\n");

fs/pstore/zone.c

1413

pr_err("registering with pstore failed\n");

fs/pstore/zone.c

354

pr_err("move zone from %lu to %d failed\n",

fs/pstore/zone.c

402

pr_err("read %s with id %lu failed\n", zone->name, i);

fs/pstore/zone.c

546

pr_err("read zone %s failed\n", zone->name);

fs/pstore/zone.c

554

pr_err("read zone %s failed\n", zone->name);

fs/pstore/zone.c

624

pr_err("recover failed\n");

fs/qnx6/dir.c

138

pr_err("%s(): read failed\n", __func__);

fs/qnx6/dir.c

258

pr_err("undefined filename size in inode.\n");

fs/qnx6/dir.c

80

pr_err("invalid direntry size (%i).\n", de->de_size);

fs/qnx6/dir.c

85

pr_err("Error reading longname\n");

fs/qnx6/dir.c

93

pr_err("Filename too long (%i)\n", lf_size);

fs/qnx6/inode.c

131

pr_err("Requested file block number (%u) too big.", no);

fs/qnx6/inode.c

140

pr_err("Error reading block (%u)\n", block);

fs/qnx6/inode.c

262

pr_err("unable to read the first superblock\n");

fs/qnx6/inode.c

276

pr_err("wrong signature (magic) in superblock #1.\n");

fs/qnx6/inode.c

313

pr_err("unable to set blocksize\n");

fs/qnx6/inode.c

334

pr_err("unable to read the first superblock\n");

fs/qnx6/inode.c

349

pr_err("superblock #1 checksum error\n");

fs/qnx6/inode.c

355

pr_err("unable to set blocksize\n");

fs/qnx6/inode.c

377

pr_err("unable to read the second superblock\n");

fs/qnx6/inode.c

383

pr_err("wrong signature (magic) in superblock #2.\n");

fs/qnx6/inode.c

390

pr_err("superblock #2 checksum error\n");

fs/qnx6/inode.c

411

pr_err("too many inode levels (max %i, sb %i)\n",

fs/qnx6/inode.c

416

pr_err("too many longfilename levels (max %i, sb %i)\n",

fs/qnx6/inode.c

439

pr_err("get inode failed\n");

fs/qnx6/inode.c

453

pr_err("%s\n", errmsg);

fs/qnx6/inode.c

532

pr_err("bad inode number on dev %s: %u is out of range\n",

fs/qnx6/inode.c

541

pr_err("major problem: unable to read inode from dev %s\n",

fs/qnx6/inode.c

92

pr_err("hit unused blockpointer.\n");

fs/qnx6/super_mmi.c

105

pr_err("unable to allocate memory.\n");

fs/qnx6/super_mmi.c

48

pr_err("Unable to read first mmi superblock\n");

fs/qnx6/super_mmi.c

55

pr_err("wrong signature (magic) in superblock #1.\n");

fs/qnx6/super_mmi.c

63

pr_err("superblock #1 checksum error\n");

fs/qnx6/super_mmi.c

73

pr_err("unable to set blocksize\n");

fs/qnx6/super_mmi.c

86

pr_err("unable to read the second superblock\n");

fs/qnx6/super_mmi.c

92

pr_err("wrong signature (magic) in superblock #2.\n");

fs/qnx6/super_mmi.c

99

pr_err("superblock #1 checksum error\n");

fs/romfs/super.c

358

pr_err("read error for inode 0x%lx\n", pos);

fs/romfs/super.c

509

pr_err("bad initial checksum on dev %s.\n", sb->s_id);

fs/romfs/super.c

630

pr_err("Failed to initialise inode cache\n");

fs/romfs/super.c

635

pr_err("Failed to register filesystem\n");

fs/smb/client/cifsroot.c

59

pr_err("Root-CIFS: UNC path too long\n");

fs/smb/client/cifsroot.c

69

pr_err("Root-CIFS: mount options string too long\n");

fs/smb/client/cifsroot.c

86

pr_err("Root-CIFS: no SMB server address\n");

fs/smb/client/fs_context.c

1590

pr_err("bad ip= option (%s)\n", param->string);

fs/smb/client/fs_context.c

880

pr_err("Unable to determine destination address\n");

fs/smb/client/fscache.c

95

pr_err("Cache volume key already in use (%s)\n", key);

fs/smb/client/smb2maperror.c

104

pr_err("smb2_error_map_table array order is incorrect\n");

fs/smb/client/smbdirect.c

1217

pr_err("failed to post send: %d\n", ret);

fs/smb/server/auth.c

845

pr_err("Could not get %scryption key\n", enc ? "en" : "de");

fs/smb/server/auth.c

855

pr_err("crypto alloc failed\n");

fs/smb/server/auth.c

871

pr_err("Failed to set aead key %d\n", rc);

fs/smb/server/auth.c

877

pr_err("Failed to set authsize %d\n", rc);

fs/smb/server/auth.c

894

pr_err("Failed to init sg\n");

fs/smb/server/connection.c

273

pr_err("NULL response header\n");

fs/smb/server/connection.c

292

pr_err("Failed to send message: %d\n", sent);

fs/smb/server/connection.c

442

pr_err("sock_read failed: %d\n", size);

fs/smb/server/connection.c

447

pr_err("PDU error. Read: %d, Expected: %d\n",

fs/smb/server/connection.c

462

pr_err("No connection request callback\n");

fs/smb/server/connection.c

467

pr_err("Cannot handle request\n");

fs/smb/server/connection.c

521

pr_err("Failed to init TCP subsystem: %d\n", ret);

fs/smb/server/connection.c

527

pr_err("Failed to init RDMA subsystem: %d\n", ret);

fs/smb/server/crypto_ctx.c

51

pr_err("Does not support encrypt ahead(id : %d)\n", id);

fs/smb/server/crypto_ctx.c

56

pr_err("Failed to alloc encrypt aead : %ld\n", PTR_ERR(tfm));

fs/smb/server/mgmt/tree_connect.c

68

pr_err("Failed to update stale share config\n");

fs/smb/server/mgmt/user_config.c

60

pr_err("ngroups(%u) from login response exceeds max groups(%d)\n",

fs/smb/server/mgmt/user_session.c

272

pr_err("Unable to close RPC pipe %d\n", entry->id);

fs/smb/server/mgmt/user_session.c

311

pr_err("Unsupported RPC: %s\n", rpc_name);

fs/smb/server/misc.c

111

pr_err("Stream name validation failed: %c\n", c);

fs/smb/server/ndr.c

493

pr_err("Invalid acl description : %s\n", acl->desc);

fs/smb/server/oplock.c

1854

pr_err("create context include lease\n");

fs/smb/server/oplock.c

1860

pr_err("oplock level is not equal to SMB2_OPLOCK_LEVEL_BATCH\n");

fs/smb/server/oplock.c

258

pr_err("bad oplock(0x%x)\n", opinfo->level);

fs/smb/server/oplock.c

260

pr_err("lease state(0x%x)\n", lease->state);

fs/smb/server/oplock.c

297

pr_err("bad oplock(0x%x)\n", opinfo->level);

fs/smb/server/oplock.c

299

pr_err("lease state(0x%x)\n", lease->state);

fs/smb/server/oplock.c

319

pr_err("bad oplock(0x%x)\n", opinfo->level);

fs/smb/server/oplock.c

321

pr_err("lease state(0x%x)\n", lease->state);

fs/smb/server/oplock.c

655

pr_err("smb2_allocate_rsp_buf failed! ");

fs/smb/server/server.c

297

pr_err("allocation for work failed\n");

fs/smb/server/server.c

401

pr_err("Unknown server work type: %d\n", ctrl->type);

fs/smb/server/server.c

558

pr_err("Unable to register ksmbd-control class\n");

fs/smb/server/smb2misc.c

377

pr_err("next command(%u) offset exceeds smb msg size\n",

fs/smb/server/smb2pdu.c

1115

pr_err("conn->tcp_status is already in CifsGood State\n");

fs/smb/server/smb2pdu.c

1130

pr_err("malformed packet\n");

fs/smb/server/smb2pdu.c

1181

pr_err("deassemble_neg_contexts error(0x%x)\n",

fs/smb/server/smb2pdu.c

126

pr_err("The first operation in the compound does not have tcon\n");

fs/smb/server/smb2pdu.c

132

pr_err("tree id(%u) is different with id(%u) in first operation\n",

fs/smb/server/smb2pdu.c

141

pr_err("Invalid tid %d\n", tree_id);

fs/smb/server/smb2pdu.c

1448

pr_err("cannot allocate memory\n");

fs/smb/server/smb2pdu.c

1591

pr_err("fail to verify the dialect\n");

fs/smb/server/smb2pdu.c

1686

pr_err("fail to verify the dialect\n");

fs/smb/server/smb2pdu.c

1894

pr_err("Not support the preferred authentication\n");

fs/smb/server/smb2pdu.c

1898

pr_err("Not support authentication\n");

fs/smb/server/smb2pdu.c

2002

pr_err("treename is NULL\n");

fs/smb/server/smb2pdu.c

2321

pr_err("Unable to open RPC pipe: %d\n", id);

fs/smb/server/smb2pdu.c

2512

pr_err("Failed to store XATTR stream name :%d\n", rc);

fs/smb/server/smb2pdu.c

2555

pr_err("vfs_truncate failed, rc %d\n", rc);

fs/smb/server/smb2pdu.c

2643

pr_err("cannot get linux path (%s), err = %d\n",

fs/smb/server/smb2pdu.c

3049

pr_err("Invalid impersonationlevel : 0x%x\n",

fs/smb/server/smb2pdu.c

3057

pr_err("Invalid create options : 0x%x\n",

fs/smb/server/smb2pdu.c

3085

pr_err("Invalid create disposition : 0x%x\n",

fs/smb/server/smb2pdu.c

3092

pr_err("Invalid desired access : 0x%x\n",

fs/smb/server/smb2pdu.c

3099

pr_err("Invalid file attribute : 0x%x\n",

fs/smb/server/smb2pdu.c

3337

pr_err("dentry open for dir failed, rc %d\n", rc);

fs/smb/server/smb2pdu.c

340

pr_err("Total credits overflow: %d\n", conn->total_credits);

fs/smb/server/smb2pdu.c

3449

pr_err("failed to store ntacl in xattr : %d\n",

fs/smb/server/smb2pdu.c

4427

pr_err("no right to enumerate directory (%pD)\n", dir_fp->filp);

fs/smb/server/smb2pdu.c

4433

pr_err("can't do query dir for a file\n");

fs/smb/server/smb2pdu.c

4560

pr_err("error while processing smb2 query dir rc = %d\n", rc);

fs/smb/server/smb2pdu.c

4600

pr_err("Invalid Buffer Size Requested\n");

fs/smb/server/smb2pdu.c

4705

pr_err("Not permitted to read ext attr : 0x%x\n",

fs/smb/server/smb2pdu.c

471

pr_err("next command(%u) offset exceeds smb msg size\n",

fs/smb/server/smb2pdu.c

478

pr_err("next response offset exceeds response buffer size\n");

fs/smb/server/smb2pdu.c

4867

pr_err("no right to read the attributes : 0x%x\n",

fs/smb/server/smb2pdu.c

5179

pr_err("no right to read the attributes : 0x%x\n",

fs/smb/server/smb2pdu.c

5280

pr_err("no right to read the attributes : 0x%x\n",

fs/smb/server/smb2pdu.c

5466

pr_err("client doesn't negotiate with SMB3.1.1 POSIX Extensions\n");

fs/smb/server/smb2pdu.c

5506

pr_err("cannot create vfs path\n");

fs/smb/server/smb2pdu.c

5512

pr_err("cannot do stat of path %s\n", share->path);

fs/smb/server/smb2pdu.c

5690

pr_err("client doesn't negotiate with SMB3.1.1 POSIX Extensions\n");

fs/smb/server/smb2pdu.c

609

pr_err("The first operation in the compound does not have sess\n");

fs/smb/server/smb2pdu.c

6113

pr_err("not allow base filename in rename\n");

fs/smb/server/smb2pdu.c

613

pr_err("session id(%llu) is different with the first operation(%lld)\n",

fs/smb/server/smb2pdu.c

6130

pr_err("failed to store stream name in xattr: %d\n",

fs/smb/server/smb2pdu.c

6262

pr_err("can't change a file to a directory\n");

fs/smb/server/smb2pdu.c

6338

pr_err("vfs_fallocate is failed : %d\n", rc);

fs/smb/server/smb2pdu.c

6354

pr_err("truncate failed!, err %d\n", rc);

fs/smb/server/smb2pdu.c

6402

pr_err("no right to delete : 0x%x\n", fp->daccess);

fs/smb/server/smb2pdu.c

6422

pr_err("no right to delete : 0x%x\n", fp->daccess);

fs/smb/server/smb2pdu.c

643

pr_err("failed to get name %ld\n", PTR_ERR(name));

fs/smb/server/smb2pdu.c

6452

pr_err("CurrentByteOffset is not valid : %llu\n",

fs/smb/server/smb2pdu.c

6475

pr_err("Mode is not valid : 0x%x\n", le32_to_cpu(mode));

fs/smb/server/smb2pdu.c

653

pr_err("not allow directory name included leading slash\n");

fs/smb/server/smb2pdu.c

6558

pr_err("Not permitted to write ext attr: 0x%x\n",

fs/smb/server/smb2pdu.c

6585

pr_err("Unimplemented Fileinfoclass :%d\n", req->FileInfoClass);

fs/smb/server/smb2pdu.c

6632

pr_err("User does not have write permission\n");

fs/smb/server/smb2pdu.c

670

pr_err("Failed to alloc async message id\n");

fs/smb/server/smb2pdu.c

6902

pr_err("Not permitted to read : 0x%x\n", fp->daccess);

fs/smb/server/smb2pdu.c

7025

pr_err("invalid write data offset %u, smb_len %u\n",

fs/smb/server/smb2pdu.c

7173

pr_err("Not permitted to write : 0x%x\n", fp->daccess);

fs/smb/server/smb2pdu.c

719

pr_err("smb_allocate_rsp_buf failed!\n");

fs/smb/server/smb2pdu.c

7506

pr_err("Invalid lock range requested\n");

fs/smb/server/smb2pdu.c

7538

pr_err("conflict two locks in one request\n");

fs/smb/server/smb2pdu.c

7621

pr_err("previous lock conflict with zero byte lock range\n");

fs/smb/server/smb2pdu.c

7630

pr_err("current lock conflict with zero byte lock range\n");

fs/smb/server/smb2pdu.c

7641

pr_err("Not allow lock operation on exclusive lock range\n");

fs/smb/server/smb2pdu.c

7650

pr_err("Try to unlock nolocked range\n");

fs/smb/server/smb2pdu.c

7784

pr_err("rollback unlock fail : %d\n", rc);

fs/smb/server/smb2pdu.c

7786

pr_err("rollback unlock alloc failed\n");

fs/smb/server/smb2pdu.c

78

pr_err("Invalid user session id: %llu\n", id);

fs/smb/server/smb2pdu.c

8480

pr_err("not found fp!!\n");

fs/smb/server/smb2pdu.c

8508

pr_err("not found file handle in duplicate extent to file\n");

fs/smb/server/smb2pdu.c

8515

pr_err("not found fp\n");

fs/smb/server/smb2pdu.c

8628

pr_err("unexpected null oplock_info\n");

fs/smb/server/smb2pdu.c

8691

pr_err("unknown oplock change 0x%x -> 0x%x\n",

fs/smb/server/smb2pdu.c

8765

pr_err("unexpected lease break state 0x%x\n",

fs/smb/server/smb2pdu.c

8980

pr_err("bad smb2 signature\n");

fs/smb/server/smb2pdu.c

9055

pr_err("SMB3 signing key is not generated\n");

fs/smb/server/smb2pdu.c

9068

pr_err("bad smb2 signature\n");

fs/smb/server/smb2pdu.c

9221

pr_err("Transform message is too small (%u)\n",

fs/smb/server/smb2pdu.c

9227

pr_err("Transform message is broken\n");

fs/smb/server/smb2pdu.c

923

pr_err("Invalid SMB2_ENCRYPTION_CAPABILITIES context size\n");

fs/smb/server/smb2pdu.c

9233

pr_err("invalid session id(%llx) in transform header\n",

fs/smb/server/smb2pdu.c

934

pr_err("Invalid cipher count(%d)\n", cph_cnt);

fs/smb/server/smb2pdu.c

987

pr_err("Invalid SMB2_SIGNING_CAPABILITIES context length\n");

fs/smb/server/smb2pdu.c

997

pr_err("Invalid signing algorithm count(%d)\n", sign_algo_cnt);

fs/smb/server/smb_common.c

388

pr_err("Failed to allocate %u bytes buffer\n",

fs/smb/server/smb_common.c

638

pr_err("Unknown SMB negotiation command: %u\n", command);

fs/smb/server/smbacl.c

268

pr_err("%s: %u subauthorities is too many!\n",

fs/smb/server/smbacl.c

274

pr_err("%s: zero subauthorities!\n", __func__);

fs/smb/server/smbacl.c

391

pr_err("ACL too small to parse DACL\n");

fs/smb/server/smbacl.c

505

pr_err("%s: Error %d mapping Owner SID to uid\n",

fs/smb/server/smbacl.c

814

pr_err("ACL too small to parse SID %p\n", psid);

fs/smb/server/smbacl.c

871

pr_err("%s: Error %d parsing Owner SID\n", __func__, rc);

fs/smb/server/smbacl.c

877

pr_err("%s: Error %d mapping Owner SID to uid\n",

fs/smb/server/smbacl.c

889

pr_err("%s: Error %d mapping Owner SID to gid\n",

fs/smb/server/smbacl.c

895

pr_err("%s: Error %d mapping Group SID to gid\n",

fs/smb/server/transport_ipc.c

288

pr_err("Waiting for IPC type %d, got %d. Ignore.\n",

fs/smb/server/transport_ipc.c

355

pr_err("Server configuration error: %s %s %s\n",

fs/smb/server/transport_ipc.c

395

pr_err("Server reset is in progress, can't start daemon\n");

fs/smb/server/transport_ipc.c

405

pr_err("Reconnect to a new user space daemon\n");

fs/smb/server/transport_ipc.c

426

pr_err("Unknown IPC event: %d, ignore.\n", info->genlhdr->cmd);

fs/smb/server/transport_ipc.c

45

pr_err("%s. ksmbd: %d, kernel module: %d. %s.\n",

fs/smb/server/transport_ipc.c

946

pr_err("No IPC daemon response for %lus\n", delta / HZ);

fs/smb/server/transport_ipc.c

990

pr_err("Failed to register KSMBD netlink interface %d\n", ret);

fs/smb/server/transport_rdma.c

1037

pr_err("Can't post recv: %d\n", ret);

fs/smb/server/transport_rdma.c

1094

pr_err("unexpected send completion wc->status=%s (%d) wc->opcode=%d\n",

fs/smb/server/transport_rdma.c

1114

pr_err("Send error. status='%s (%d)', opcode=%d\n",

fs/smb/server/transport_rdma.c

1190

pr_err("failed to post send: %d\n", ret);

fs/smb/server/transport_rdma.c

1567

pr_err("failed to map buffer\n");

fs/smb/server/transport_rdma.c

1571

pr_err("buffer not fitted into sges\n");

fs/smb/server/transport_rdma.c

1780

pr_err("read/write error. opcode = %d, status = %s(%d)\n",

fs/smb/server/transport_rdma.c

1890

pr_err("failed to init rdma_rw_ctx: %d\n", ret);

fs/smb/server/transport_rdma.c

1907

pr_err("failed to post send wr for RDMA R/W: %d\n", ret);

fs/smb/server/transport_rdma.c

2019

pr_err("Unexpected RDMA CM event. cm_id=%p, event=%s (%d)\n",

fs/smb/server/transport_rdma.c

2153

pr_err("error at rdma_accept: %d\n", ret);

fs/smb/server/transport_rdma.c

2177

pr_err("Can't post recv: %d\n", ret);

fs/smb/server/transport_rdma.c

2184

pr_err("Can't accept client\n");

fs/smb/server/transport_rdma.c

2212

pr_err("max_send_size %d is too large\n", sp->max_send_size);

fs/smb/server/transport_rdma.c

2376

pr_err("Possible CQE overrun: max_send_wr %d\n",

fs/smb/server/transport_rdma.c

2378

pr_err("device %.*s reporting max_cqe %d max_qp_wr %d\n",

fs/smb/server/transport_rdma.c

2383

pr_err("consider lowering send_credit_target = %d\n",

fs/smb/server/transport_rdma.c

2391

pr_err("Possible CQE overrun: rdma_send_wr %d + max_send_wr %d = %d\n",

fs/smb/server/transport_rdma.c

2393

pr_err("device %.*s reporting max_cqe %d max_qp_wr %d\n",

fs/smb/server/transport_rdma.c

2398

pr_err("consider lowering send_credit_target = %d, max_rdma_ctxs = %d\n",

fs/smb/server/transport_rdma.c

2405

pr_err("Possible CQE overrun: max_recv_wr %d\n",

fs/smb/server/transport_rdma.c

2407

pr_err("device %.*s reporting max_cqe %d max_qp_wr %d\n",

fs/smb/server/transport_rdma.c

2412

pr_err("consider lowering receive_credit_max = %d\n",

fs/smb/server/transport_rdma.c

2419

pr_err("device %.*s max_send_sge/max_recv_sge = %d/%d too small\n",

fs/smb/server/transport_rdma.c

2429

pr_err("Can't create RDMA PD\n");

fs/smb/server/transport_rdma.c

2439

pr_err("Can't create RDMA send CQ\n");

fs/smb/server/transport_rdma.c

2449

pr_err("Can't create RDMA recv CQ\n");

fs/smb/server/transport_rdma.c

2475

pr_err("Can't create RDMA QP: %d\n", ret);

fs/smb/server/transport_rdma.c

2620

pr_err("Can't configure RDMA parameters\n");

fs/smb/server/transport_rdma.c

2626

pr_err("Can't init RDMA pool: %d\n", ret);

fs/smb/server/transport_rdma.c

2635

pr_err("Can't accept RDMA client: %d\n", ret);

fs/smb/server/transport_rdma.c

2641

pr_err("Can't negotiate: %d\n", ret);

fs/smb/server/transport_rdma.c

2751

pr_err("Can't start thread\n");

fs/smb/server/transport_rdma.c

2769

pr_err("Can't create transport: %d\n", ret);

fs/smb/server/transport_rdma.c

2778

pr_err("Unexpected listen event. cm_id=%p, event=%s (%d)\n",

fs/smb/server/transport_rdma.c

2815

pr_err("unsupported smbdirect port=%d!\n", port);

fs/smb/server/transport_rdma.c

2822

pr_err("Can't create cm id: %ld\n", PTR_ERR(cm_id));

fs/smb/server/transport_rdma.c

2828

pr_err("rdma_restrict_node_type(%u) failed %d\n",

fs/smb/server/transport_rdma.c

2835

pr_err("Can't bind: %d\n", ret);

fs/smb/server/transport_rdma.c

2841

pr_err("Can't listen: %d\n", ret);

fs/smb/server/transport_rdma.c

2908

pr_err("failed to ib_register_client\n");

fs/smb/server/transport_rdma.c

2928

pr_err("Can't listen on InfiniBand/RoCEv1/RoCEv2: %d\n", ret);

fs/smb/server/transport_rdma.c

2938

pr_err("Can't listen on iWarp: %d\n", ret);

fs/smb/server/transport_rdma.c

630

pr_err("Recv error. status='%s (%d)' opcode=%d\n",

fs/smb/server/transport_rdma.c

761

pr_err("Negotiate Recv error. status='%s (%d)' opcode=%d\n",

fs/smb/server/transport_rdma.c

888

pr_err("Can't post recv: %d\n", ret);

fs/smb/server/transport_rdma.c

912

pr_err("disconnected\n");

fs/smb/server/transport_tcp.c

204

pr_err("cannot start conn thread\n");

fs/smb/server/transport_tcp.c

444

pr_err("Failed to shutdown socket: %d\n", ret);

fs/smb/server/transport_tcp.c

466

pr_err("Can't create socket for ipv6, fallback to ipv4: %d\n", ret);

fs/smb/server/transport_tcp.c

470

pr_err("Can't create socket for ipv4: %d\n", ret);

fs/smb/server/transport_tcp.c

497

pr_err("Failed to set SO_BINDTODEVICE: %d\n", ret);

fs/smb/server/transport_tcp.c

508

pr_err("Failed to bind socket: %d\n", ret);

fs/smb/server/transport_tcp.c

514

pr_err("Port listen() error: %d\n", ret);

fs/smb/server/transport_tcp.c

521

pr_err("Can't start ksmbd main kthread: %d\n", ret);

fs/smb/server/transport_tcp.c

616

pr_err("failed to stop forker thread\n");

fs/smb/server/vfs.c

1384

pr_err("unknown type : 0x%x\n", pa_entry->e_tag);

fs/smb/server/vfs.c

1441

pr_err("failed to encode ndr to posix acl\n");

fs/smb/server/vfs.c

1449

pr_err("failed to encode ndr to posix acl\n");

fs/smb/server/vfs.c

1457

pr_err("Failed to store XATTR ntacl :%d\n", rc);

fs/smb/server/vfs.c

1498

pr_err("failed to encode ndr to posix acl\n");

fs/smb/server/vfs.c

1505

pr_err("hash value diff\n");

fs/smb/server/vfs.c

1512

pr_err("sd size is invalid\n");

fs/smb/server/vfs.c

162

pr_err("path create failed for %s, err %d\n",

fs/smb/server/vfs.c

1727

pr_err("no right to read(%pD)\n", src_fp->filp);

fs/smb/server/vfs.c

173

pr_err("File(%s): creation failed (err:%d)\n", name, err);

fs/smb/server/vfs.c

1731

pr_err("no right to write(%pD)\n", dst_fp->filp);

fs/smb/server/vfs.c

219

pr_err("mkdir(%s): creation failed (err:%d)\n", name, err);

fs/smb/server/vfs.c

245

pr_err("failed to get xattr in file\n");

fs/smb/server/vfs.c

315

pr_err("not allow write by shared lock\n");

fs/smb/server/vfs.c

323

pr_err("not allow rw access by exclusive lock from other opens\n");

fs/smb/server/vfs.c

359

pr_err("no right to read(%pD)\n", fp->filp);

fs/smb/server/vfs.c

372

pr_err("unable to read due to lock\n");

fs/smb/server/vfs.c

379

pr_err("smb read failed, err = %zd\n", nbytes);

fs/smb/server/vfs.c

401

pr_err("stream write position %lld is out of bounds\n", *pos);

fs/smb/server/vfs.c

417

pr_err("not found stream in xattr : %zd\n", v_len);

fs/smb/server/vfs.c

477

pr_err("no right to write(%pD)\n", fp->filp);

fs/smb/server/vfs.c

495

pr_err("unable to write due to lock\n");

fs/smb/server/vfs.c

519

pr_err("fsync failed for filename = %pD, err = %d\n",

fs/smb/server/vfs.c

541

pr_err("getattr failed, err %d\n", err);

fs/smb/server/vfs.c

560

pr_err("failed to get filp for fid %llu\n", fid);

fs/smb/server/vfs.c

565

pr_err("smb fsync failed, err = %d\n", err);

fs/smb/server/vfs.c

627

pr_err("cannot get linux path for %s, err = %d\n",

fs/smb/server/vfs.c

637

pr_err("path create err for %s, err %d\n", newname, err);

fs/smb/server/vfs.c

643

pr_err("vfs_link failed err %d\n", err);

fs/smb/server/vfs.c

707

pr_err("parent dir is opened with delete access\n");

fs/smb/server/vfs.c

771

pr_err("failed due to lock\n");

fs/smb/server/vfs.c

778

pr_err("truncate failed, err %d\n", err);

fs/smb/server/vfs_cache.c

1095

pr_err("Invalid durable fd [%p:%p]\n", fp->conn, fp->tcon);

fs/smb/server/vfs_cache.c

1100

pr_err("Still in use durable fd: %llu\n", fp->volatile_id);

fs/smb/server/vfs_cache.c

1162

pr_err("failed to allocate file cache\n");

fs/smb/server/vfs_cache.c

312

pr_err("inode initialized failed\n");

fs/smb/server/vfs_cache.c

392

pr_err("remove xattr failed : %s\n",

fs/smb/server/vfs_cache.c

739

pr_err("Failed to allocate memory\n");

fs/smb/server/vfs_cache.c

969

pr_err("cannot start conn thread, err : %ld\n",

fs/squashfs/squashfs.h

13

#define ERROR(s, args...) pr_err("SQUASHFS error: "s, ## args)

fs/super.c

1759

pr_err("Filesystem %s get_tree() didn't set fc->root, returned %i\n",

fs/super.c

2197

pr_err("VFS: Filesystem thaw failed\n");

fs/ubifs/compress.c

309

pr_err("UBIFS error (pid %d): cannot initialize compressor %s, error %ld",

fs/ubifs/debug.c

213

pr_err("\tmagic %#x\n", le32_to_cpu(ch->magic));

fs/ubifs/debug.c

214

pr_err("\tcrc %#x\n", le32_to_cpu(ch->crc));

fs/ubifs/debug.c

215

pr_err("\tnode_type %d (%s)\n", ch->node_type,

fs/ubifs/debug.c

217

pr_err("\tgroup_type %d (%s)\n", ch->group_type,

fs/ubifs/debug.c

219

pr_err("\tsqnum %llu\n",

fs/ubifs/debug.c

221

pr_err("\tlen %u\n", le32_to_cpu(ch->len));

fs/ubifs/debug.c

232

pr_err("Dump in-memory inode:");

fs/ubifs/debug.c

233

pr_err("\tinode %lu\n", inode->i_ino);

fs/ubifs/debug.c

234

pr_err("\tsize %llu\n",

fs/ubifs/debug.c

236

pr_err("\tnlink %u\n", inode->i_nlink);

fs/ubifs/debug.c

237

pr_err("\tuid %u\n", (unsigned int)i_uid_read(inode));

fs/ubifs/debug.c

238

pr_err("\tgid %u\n", (unsigned int)i_gid_read(inode));

fs/ubifs/debug.c

239

pr_err("\tatime %u.%u\n",

fs/ubifs/debug.c

242

pr_err("\tmtime %u.%u\n",

fs/ubifs/debug.c

245

pr_err("\tctime %u.%u\n",

fs/ubifs/debug.c

248

pr_err("\tcreat_sqnum %llu\n", ui->creat_sqnum);

fs/ubifs/debug.c

249

pr_err("\txattr_size %u\n", ui->xattr_size);

fs/ubifs/debug.c

250

pr_err("\txattr_cnt %u\n", ui->xattr_cnt);

fs/ubifs/debug.c

251

pr_err("\txattr_names %u\n", ui->xattr_names);

fs/ubifs/debug.c

252

pr_err("\tdirty %u\n", ui->dirty);

fs/ubifs/debug.c

253

pr_err("\txattr %u\n", ui->xattr);

fs/ubifs/debug.c

254

pr_err("\tbulk_read %u\n", ui->bulk_read);

fs/ubifs/debug.c

255

pr_err("\tsynced_i_size %llu\n",

fs/ubifs/debug.c

257

pr_err("\tui_size %llu\n",

fs/ubifs/debug.c

259

pr_err("\tflags %d\n", ui->flags);

fs/ubifs/debug.c

260

pr_err("\tcompr_type %d\n", ui->compr_type);

fs/ubifs/debug.c

261

pr_err("\tlast_page_read %lu\n", ui->last_page_read);

fs/ubifs/debug.c

262

pr_err("\tread_in_a_row %lu\n", ui->read_in_a_row);

fs/ubifs/debug.c

263

pr_err("\tdata_len %d\n", ui->data_len);

fs/ubifs/debug.c

268

pr_err("List of directory entries:\n");

fs/ubifs/debug.c

276

pr_err("error %ld\n", PTR_ERR(dent));

fs/ubifs/debug.c

280

pr_err("\t%d: inode %llu, type %s, len %d\n",

fs/ubifs/debug.c

303

pr_err("Not a node, first %zu bytes:", UBIFS_CH_SZ);

fs/ubifs/debug.c

312

pr_err("node type %d was not recognized\n", type);

fs/ubifs/debug.c

329

pr_err("node len(%d) is too short for %s, left %d bytes:\n",

fs/ubifs/debug.c

340

pr_err("\ttruncated node length %d\n", safe_len);

fs/ubifs/debug.c

347

pr_err("\tpad_len %u\n", le32_to_cpu(pad->pad_len));

fs/ubifs/debug.c

355

pr_err("\tkey_hash %d (%s)\n",

fs/ubifs/debug.c

357

pr_err("\tkey_fmt %d (%s)\n",

fs/ubifs/debug.c

359

pr_err("\tflags %#x\n", sup_flags);

fs/ubifs/debug.c

360

pr_err("\tbig_lpt %u\n",

fs/ubifs/debug.c

362

pr_err("\tspace_fixup %u\n",

fs/ubifs/debug.c

364

pr_err("\tmin_io_size %u\n", le32_to_cpu(sup->min_io_size));

fs/ubifs/debug.c

365

pr_err("\tleb_size %u\n", le32_to_cpu(sup->leb_size));

fs/ubifs/debug.c

366

pr_err("\tleb_cnt %u\n", le32_to_cpu(sup->leb_cnt));

fs/ubifs/debug.c

367

pr_err("\tmax_leb_cnt %u\n", le32_to_cpu(sup->max_leb_cnt));

fs/ubifs/debug.c

368

pr_err("\tmax_bud_bytes %llu\n",

fs/ubifs/debug.c

370

pr_err("\tlog_lebs %u\n", le32_to_cpu(sup->log_lebs));

fs/ubifs/debug.c

371

pr_err("\tlpt_lebs %u\n", le32_to_cpu(sup->lpt_lebs));

fs/ubifs/debug.c

372

pr_err("\torph_lebs %u\n", le32_to_cpu(sup->orph_lebs));

fs/ubifs/debug.c

373

pr_err("\tjhead_cnt %u\n", le32_to_cpu(sup->jhead_cnt));

fs/ubifs/debug.c

374

pr_err("\tfanout %u\n", le32_to_cpu(sup->fanout));

fs/ubifs/debug.c

375

pr_err("\tlsave_cnt %u\n", le32_to_cpu(sup->lsave_cnt));

fs/ubifs/debug.c

376

pr_err("\tdefault_compr %u\n",

fs/ubifs/debug.c

378

pr_err("\trp_size %llu\n",

fs/ubifs/debug.c

380

pr_err("\trp_uid %u\n", le32_to_cpu(sup->rp_uid));

fs/ubifs/debug.c

381

pr_err("\trp_gid %u\n", le32_to_cpu(sup->rp_gid));

fs/ubifs/debug.c

382

pr_err("\tfmt_version %u\n", le32_to_cpu(sup->fmt_version));

fs/ubifs/debug.c

383

pr_err("\ttime_gran %u\n", le32_to_cpu(sup->time_gran));

fs/ubifs/debug.c

384

pr_err("\tUUID %pUB\n", sup->uuid);

fs/ubifs/debug.c

391

pr_err("\thighest_inum %llu\n",

fs/ubifs/debug.c

393

pr_err("\tcommit number %llu\n",

fs/ubifs/debug.c

395

pr_err("\tflags %#x\n", le32_to_cpu(mst->flags));

fs/ubifs/debug.c

396

pr_err("\tlog_lnum %u\n", le32_to_cpu(mst->log_lnum));

fs/ubifs/debug.c

397

pr_err("\troot_lnum %u\n", le32_to_cpu(mst->root_lnum));

fs/ubifs/debug.c

398

pr_err("\troot_offs %u\n", le32_to_cpu(mst->root_offs));

fs/ubifs/debug.c

399

pr_err("\troot_len %u\n", le32_to_cpu(mst->root_len));

fs/ubifs/debug.c

400

pr_err("\tgc_lnum %u\n", le32_to_cpu(mst->gc_lnum));

fs/ubifs/debug.c

401

pr_err("\tihead_lnum %u\n", le32_to_cpu(mst->ihead_lnum));

fs/ubifs/debug.c

402

pr_err("\tihead_offs %u\n", le32_to_cpu(mst->ihead_offs));

fs/ubifs/debug.c

403

pr_err("\tindex_size %llu\n",

fs/ubifs/debug.c

405

pr_err("\tlpt_lnum %u\n", le32_to_cpu(mst->lpt_lnum));

fs/ubifs/debug.c

406

pr_err("\tlpt_offs %u\n", le32_to_cpu(mst->lpt_offs));

fs/ubifs/debug.c

407

pr_err("\tnhead_lnum %u\n", le32_to_cpu(mst->nhead_lnum));

fs/ubifs/debug.c

408

pr_err("\tnhead_offs %u\n", le32_to_cpu(mst->nhead_offs));

fs/ubifs/debug.c

409

pr_err("\tltab_lnum %u\n", le32_to_cpu(mst->ltab_lnum));

fs/ubifs/debug.c

410

pr_err("\tltab_offs %u\n", le32_to_cpu(mst->ltab_offs));

fs/ubifs/debug.c

411

pr_err("\tlsave_lnum %u\n", le32_to_cpu(mst->lsave_lnum));

fs/ubifs/debug.c

412

pr_err("\tlsave_offs %u\n", le32_to_cpu(mst->lsave_offs));

fs/ubifs/debug.c

413

pr_err("\tlscan_lnum %u\n", le32_to_cpu(mst->lscan_lnum));

fs/ubifs/debug.c

414

pr_err("\tleb_cnt %u\n", le32_to_cpu(mst->leb_cnt));

fs/ubifs/debug.c

415

pr_err("\tempty_lebs %u\n", le32_to_cpu(mst->empty_lebs));

fs/ubifs/debug.c

416

pr_err("\tidx_lebs %u\n", le32_to_cpu(mst->idx_lebs));

fs/ubifs/debug.c

417

pr_err("\ttotal_free %llu\n",

fs/ubifs/debug.c

419

pr_err("\ttotal_dirty %llu\n",

fs/ubifs/debug.c

421

pr_err("\ttotal_used %llu\n",

fs/ubifs/debug.c

423

pr_err("\ttotal_dead %llu\n",

fs/ubifs/debug.c

425

pr_err("\ttotal_dark %llu\n",

fs/ubifs/debug.c

433

pr_err("\tlnum %u\n", le32_to_cpu(ref->lnum));

fs/ubifs/debug.c

434

pr_err("\toffs %u\n", le32_to_cpu(ref->offs));

fs/ubifs/debug.c

435

pr_err("\tjhead %u\n", le32_to_cpu(ref->jhead));

fs/ubifs/debug.c

443

pr_err("\tkey %s\n",

fs/ubifs/debug.c

445

pr_err("\tcreat_sqnum %llu\n",

fs/ubifs/debug.c

447

pr_err("\tsize %llu\n",

fs/ubifs/debug.c

449

pr_err("\tnlink %u\n", le32_to_cpu(ino->nlink));

fs/ubifs/debug.c

450

pr_err("\tatime %lld.%u\n",

fs/ubifs/debug.c

453

pr_err("\tmtime %lld.%u\n",

fs/ubifs/debug.c

456

pr_err("\tctime %lld.%u\n",

fs/ubifs/debug.c

459

pr_err("\tuid %u\n", le32_to_cpu(ino->uid));

fs/ubifs/debug.c

460

pr_err("\tgid %u\n", le32_to_cpu(ino->gid));

fs/ubifs/debug.c

461

pr_err("\tmode %u\n", le32_to_cpu(ino->mode));

fs/ubifs/debug.c

462

pr_err("\tflags %#x\n", le32_to_cpu(ino->flags));

fs/ubifs/debug.c

463

pr_err("\txattr_cnt %u\n", le32_to_cpu(ino->xattr_cnt));

fs/ubifs/debug.c

464

pr_err("\txattr_size %u\n", le32_to_cpu(ino->xattr_size));

fs/ubifs/debug.c

465

pr_err("\txattr_names %u\n", le32_to_cpu(ino->xattr_names));

fs/ubifs/debug.c

466

pr_err("\tcompr_type %#x\n",

fs/ubifs/debug.c

468

pr_err("\tdata len %u\n", le32_to_cpu(ino->data_len));

fs/ubifs/debug.c

478

pr_err("\tkey %s\n",

fs/ubifs/debug.c

480

pr_err("\tinum %llu\n",

fs/ubifs/debug.c

482

pr_err("\ttype %d\n", (int)dent->type);

fs/ubifs/debug.c

483

pr_err("\tnlen %d\n", nlen);

fs/ubifs/debug.c

484

pr_err("\tname ");

fs/ubifs/debug.c

488

pr_err("(bad name length, not printing, bad or corrupted node)");

fs/ubifs/debug.c

503

pr_err("\tkey %s\n",

fs/ubifs/debug.c

505

pr_err("\tsize %u\n", le32_to_cpu(dn->size));

fs/ubifs/debug.c

506

pr_err("\tcompr_typ %d\n",

fs/ubifs/debug.c

508

pr_err("\tdata size %u\n",

fs/ubifs/debug.c

510

pr_err("\tdata (length = %d):\n",

fs/ubifs/debug.c

521

pr_err("\tinum %u\n", le32_to_cpu(trun->inum));

fs/ubifs/debug.c

522

pr_err("\told_size %llu\n",

fs/ubifs/debug.c

524

pr_err("\tnew_size %llu\n",

fs/ubifs/debug.c

536

pr_err("\tchild_cnt %d\n", (int)le16_to_cpu(idx->child_cnt));

fs/ubifs/debug.c

537

pr_err("\tlevel %d\n", (int)le16_to_cpu(idx->level));

fs/ubifs/debug.c

538

pr_err("\tBranches:\n");

fs/ubifs/debug.c

545

pr_err("\t%d: LEB %d:%d len %d key %s\n",

fs/ubifs/debug.c

559

pr_err("\tcommit number %llu\n",

fs/ubifs/debug.c

562

pr_err("\tlast node flag %llu\n",

fs/ubifs/debug.c

565

pr_err("\t%d orphan inode numbers:\n", n);

fs/ubifs/debug.c

567

pr_err("\t ino %llu\n",

fs/ubifs/debug.c

576

pr_err("node type %d was not recognized\n", type);

fs/ubifs/debug.c

586

pr_err("Budgeting request: new_ino %d, dirtied_ino %d\n",

fs/ubifs/debug.c

588

pr_err("\tnew_ino_d %d, dirtied_ino_d %d\n",

fs/ubifs/debug.c

590

pr_err("\tnew_page %d, dirtied_page %d\n",

fs/ubifs/debug.c

592

pr_err("\tnew_dent %d, mod_dent %d\n",

fs/ubifs/debug.c

594

pr_err("\tidx_growth %d\n", req->idx_growth);

fs/ubifs/debug.c

595

pr_err("\tdata_growth %d dd_growth %d\n",

fs/ubifs/debug.c

603

pr_err("(pid %d) Lprops statistics: empty_lebs %d, idx_lebs %d\n",

fs/ubifs/debug.c

605

pr_err("\ttaken_empty_lebs %d, total_free %lld, total_dirty %lld\n",

fs/ubifs/debug.c

607

pr_err("\ttotal_used %lld, total_dark %lld, total_dead %lld\n",

fs/ubifs/debug.c

622

pr_err("(pid %d) Budgeting info: data budget sum %lld, total budget sum %lld\n",

fs/ubifs/debug.c

625

pr_err("\tbudg_data_growth %lld, budg_dd_growth %lld, budg_idx_growth %lld\n",

fs/ubifs/debug.c

627

pr_err("\tmin_idx_lebs %d, old_idx_sz %llu, uncommitted_idx %lld\n",

fs/ubifs/debug.c

629

pr_err("\tpage_budget %d, inode_budget %d, dent_budget %d\n",

fs/ubifs/debug.c

631

pr_err("\tnospace %u, nospace_rp %u\n", bi->nospace, bi->nospace_rp);

fs/ubifs/debug.c

632

pr_err("\tdark_wm %d, dead_wm %d, max_idx_node_sz %d\n",

fs/ubifs/debug.c

643

pr_err("\tfreeable_cnt %d, calc_idx_sz %lld, idx_gc_cnt %d\n",

fs/ubifs/debug.c

645

pr_err("\tdirty_pg_cnt %ld, dirty_zn_cnt %ld, clean_zn_cnt %ld\n",

fs/ubifs/debug.c

649

pr_err("\tgc_lnum %d, ihead_lnum %d\n", c->gc_lnum, c->ihead_lnum);

fs/ubifs/debug.c

654

pr_err("\tjhead %s\t LEB %d\n",

fs/ubifs/debug.c

659

pr_err("\tbud LEB %d\n", bud->lnum);

fs/ubifs/debug.c

662

pr_err("\told bud LEB %d\n", bud->lnum);

fs/ubifs/debug.c

664

pr_err("\tGC'ed idx LEB %d unmap %d\n",

fs/ubifs/debug.c

666

pr_err("\tcommit state %d\n", c->cmt_state);

fs/ubifs/debug.c

672

pr_err("Budgeting predictions:\n");

fs/ubifs/debug.c

673

pr_err("\tavailable: %lld, outstanding %lld, free %lld\n",

fs/ubifs/debug.c

693

pr_err("LEB %-7d free %-8d dirty %-8d used %-8d free + dirty %-8d flags %#x (",

fs/ubifs/debug.c

697

pr_err("LEB %-7d free %-8d dirty %-8d used %-8d free + dirty %-8d dark %-4d dead %-4d nodes fit %-3d flags %#-4x (",

fs/ubifs/debug.c

777

pr_err("(pid %d) start dumping LEB properties\n", current->pid);

fs/ubifs/debug.c

790

pr_err("(pid %d) finish dumping LEB properties\n", current->pid);

fs/ubifs/debug.c

798

pr_err("(pid %d) dumping LPT information\n", current->pid);

fs/ubifs/debug.c

799

pr_err("\tlpt_sz: %lld\n", c->lpt_sz);

fs/ubifs/debug.c

800

pr_err("\tpnode_sz: %d\n", c->pnode_sz);

fs/ubifs/debug.c

801

pr_err("\tnnode_sz: %d\n", c->nnode_sz);

fs/ubifs/debug.c

802

pr_err("\tltab_sz: %d\n", c->ltab_sz);

fs/ubifs/debug.c

803

pr_err("\tlsave_sz: %d\n", c->lsave_sz);

fs/ubifs/debug.c

804

pr_err("\tbig_lpt: %u\n", c->big_lpt);

fs/ubifs/debug.c

805

pr_err("\tlpt_hght: %d\n", c->lpt_hght);

fs/ubifs/debug.c

806

pr_err("\tpnode_cnt: %d\n", c->pnode_cnt);

fs/ubifs/debug.c

807

pr_err("\tnnode_cnt: %d\n", c->nnode_cnt);

fs/ubifs/debug.c

808

pr_err("\tdirty_pn_cnt: %d\n", c->dirty_pn_cnt);

fs/ubifs/debug.c

809

pr_err("\tdirty_nn_cnt: %d\n", c->dirty_nn_cnt);

fs/ubifs/debug.c

810

pr_err("\tlsave_cnt: %d\n", c->lsave_cnt);

fs/ubifs/debug.c

811

pr_err("\tspace_bits: %d\n", c->space_bits);

fs/ubifs/debug.c

812

pr_err("\tlpt_lnum_bits: %d\n", c->lpt_lnum_bits);

fs/ubifs/debug.c

813

pr_err("\tlpt_offs_bits: %d\n", c->lpt_offs_bits);

fs/ubifs/debug.c

814

pr_err("\tlpt_spc_bits: %d\n", c->lpt_spc_bits);

fs/ubifs/debug.c

815

pr_err("\tpcnt_bits: %d\n", c->pcnt_bits);

fs/ubifs/debug.c

816

pr_err("\tlnum_bits: %d\n", c->lnum_bits);

fs/ubifs/debug.c

817

pr_err("\tLPT root is at %d:%d\n", c->lpt_lnum, c->lpt_offs);

fs/ubifs/debug.c

818

pr_err("\tLPT head is at %d:%d\n",

fs/ubifs/debug.c

820

pr_err("\tLPT ltab is at %d:%d\n", c->ltab_lnum, c->ltab_offs);

fs/ubifs/debug.c

822

pr_err("\tLPT lsave is at %d:%d\n",

fs/ubifs/debug.c

825

pr_err("\tLPT LEB %d free %d dirty %d tgc %d cmt %d\n",

fs/ubifs/debug.c

837

pr_err("(pid %d) start dumping LEB %d\n", current->pid, lnum);

fs/ubifs/debug.c

851

pr_err("LEB %d has %d nodes ending at %d\n", lnum,

fs/ubifs/debug.c

856

pr_err("Dumping node at LEB %d:%d len %d\n", lnum,

fs/ubifs/debug.c

861

pr_err("(pid %d) finish dumping LEB %d\n", current->pid, lnum);

fs/ubifs/debug.c

881

pr_err("znode %p, LEB %d:%d len %d parent %p iip %d level %d child_cnt %d flags %lx\n",

fs/ubifs/debug.c

890

pr_err("zbranches:\n");

fs/ubifs/debug.c

894

pr_err("\t%d: znode %p LEB %d:%d len %d key %s\n",

fs/ubifs/debug.c

899

pr_err("\t%d: LNC %p LEB %d:%d len %d key %s\n",

fs/ubifs/debug.c

911

pr_err("(pid %d) start dumping heap cat %d (%d elements)\n",

fs/ubifs/debug.c

916

pr_err("\t%d. LEB %d hpos %d free %d dirty %d flags %d\n",

fs/ubifs/debug.c

920

pr_err("(pid %d) finish dumping heap\n", current->pid);

fs/ubifs/debug.c

928

pr_err("(pid %d) dumping pnode:\n", current->pid);

fs/ubifs/debug.c

929

pr_err("\taddress %zx parent %zx cnext %zx\n",

fs/ubifs/debug.c

931

pr_err("\tflags %lu iip %d level %d num %d\n",

fs/ubifs/debug.c

936

pr_err("\t%d: free %d dirty %d flags %d lnum %d\n",

fs/ubifs/debug.c

946

pr_err("\n");

fs/ubifs/debug.c

947

pr_err("(pid %d) start dumping TNC tree\n", current->pid);

fs/ubifs/debug.c

951

pr_err("== Level %d ==\n", level);

fs/ubifs/debug.c

955

pr_err("== Level %d ==\n", level);

fs/ubifs/debug.c

961

pr_err("empty TNC tree in memory\n");

fs/ubifs/debug.c

963

pr_err("(pid %d) finish dumping TNC tree\n", current->pid);

fs/ubifs/lpt_commit.c

1846

pr_err("(pid %d) start dumping LEB %d\n", current->pid, lnum);

fs/ubifs/lpt_commit.c

1864

pr_err("LEB %d:%d, pad %d bytes\n",

fs/ubifs/lpt_commit.c

1871

pr_err("LEB %d:%d, free %d bytes\n",

fs/ubifs/lpt_commit.c

1882

pr_err("LEB %d:%d, pnode num %d\n",

fs/ubifs/lpt_commit.c

1885

pr_err("LEB %d:%d, pnode\n", lnum, offs);

fs/ubifs/lpt_commit.c

1895

pr_err("LEB %d:%d, nnode num %d, ",

fs/ubifs/lpt_commit.c

1898

pr_err("LEB %d:%d, nnode, ",

fs/ubifs/lpt_commit.c

1902

pr_err("failed to unpack_node, error %d\n",

fs/ubifs/lpt_commit.c

1917

pr_err("LEB %d:%d, ltab\n", lnum, offs);

fs/ubifs/lpt_commit.c

1921

pr_err("LEB %d:%d, lsave len\n", lnum, offs);

fs/ubifs/lpt_commit.c

1932

pr_err("(pid %d) finish dumping LEB %d\n", current->pid, lnum);

fs/ubifs/lpt_commit.c

1948

pr_err("(pid %d) start dumping all LPT LEBs\n", current->pid);

fs/ubifs/lpt_commit.c

1951

pr_err("(pid %d) finish dumping all LPT LEBs\n", current->pid);

fs/ubifs/misc.c

33

pr_err("UBIFS error (ubi%d:%d pid %d): %ps: %pV\n",

fs/ubifs/super.c

2253

pr_err("UBIFS error (pid: %d): cannot open \"%s\", error %d",

fs/ubifs/super.c

2439

pr_err("UBIFS error (pid %d): VFS page cache size is %u bytes, but UBIFS requires at least 4096 bytes",

fs/ubifs/super.c

2472

pr_err("UBIFS error (pid %d): cannot register file system, error %d",

fs/udf/directory.c

505

pr_err("%s: invalidparms\n", __func__);

fs/udf/directory.c

527

pr_err("%s: invalidparms\n", __func__);

fs/udf/super.c

2343

pr_err("error (device %s): %s: %pV", sb->s_id, function, &vaf);

fs/udf/unicode.c

185

pr_err("unknown compression code (%u)\n", cmp_id);

fs/udf/unicode.c

194

pr_err("incorrect filename length (%d)\n", ocu_len + 1);

fs/ufs/super.c

1007

pr_err("%s(): fragment size %u is not a power of 2\n",

fs/ufs/super.c

1012

pr_err("%s(): fragment size %u is too small\n",

fs/ufs/super.c

1017

pr_err("%s(): fragment size %u is too large\n",

fs/ufs/super.c

1022

pr_err("%s(): block size %u is not a power of 2\n",

fs/ufs/super.c

1027

pr_err("%s(): block size %u is too small\n",

fs/ufs/super.c

1032

pr_err("%s(): too many fragments per block (%u)\n",

fs/ufs/super.c

1072

pr_err("%s(): fs is active\n", __func__);

fs/ufs/super.c

1076

pr_err("%s(): fs is bad\n", __func__);

fs/ufs/super.c

1080

pr_err("%s(): can't grok fs_clean 0x%x\n",

fs/ufs/super.c

1086

pr_err("%s(): fs needs fsck\n", __func__);

fs/ufs/super.c

1281

pr_err("ufs was compiled with read-only support, can't be mounted as read-write\n");

fs/ufs/super.c

1290

pr_err("this ufstype is read-only supported\n");

fs/ufs/super.c

1295

pr_err("failed during remounting\n");

fs/ufs/super.c

397

pr_err("ufstype can't be changed during remount\n");

fs/ufs/super.c

401

pr_err("conflicting ufstype options\n");

fs/ufs/super.c

741

pr_err("ufs was compiled with read-only support, can't be mounted as read-write\n");

fs/ufs/super.c

763

pr_err("You didn't specify the type of your ufs filesystem\n\n"

fs/ufs/super.c

921

pr_err("unknown ufstype\n");

fs/ufs/super.c

927

pr_err("failed to set blocksize\n");

fs/ufs/super.c

955

pr_err("this is not a 44bsd filesystem");

fs/ufs/super.c

993

pr_err("%s(): bad magic number\n", __func__);

fs/zonefs/zonefs.h

254

pr_err("zonefs (%s) ERROR: " format, sb->s_id, ## args)

include/crypto/internal/kdf_selftest.h

42

pr_err("alg: kdf: could not allocate hash handle for %s\n",

include/crypto/internal/kdf_selftest.h

51

pr_err("alg: kdf: could not set key derivation key\n");

include/crypto/internal/kdf_selftest.h

57

pr_err("alg: kdf: could not obtain key data\n");

include/linux/bug.h

102

pr_err(fmt, ##__VA_ARGS__); \

include/linux/ceph/ceph_debug.h

64

pr_err("[%pU %llu]: " fmt, &client->fsid, \

include/linux/device-mapper.h

663

#define DMERR(fmt, ...) pr_err(DM_FMT(fmt), ##__VA_ARGS__)

include/linux/fb.h

893

pr_err("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)

include/linux/filter.h

1319

pr_err("flen=%u proglen=%u pass=%u image=%p from=%s pid=%d\n", flen,

include/linux/firmware/trusted_foundations.h

60

pr_err("No support for Trusted Foundations, continuing in degraded mode.\n");

include/linux/firmware/trusted_foundations.h

61

pr_err("Secondary processors as well as CPU PM will be disabled.\n");

include/linux/firmware/trusted_foundations.h

63

pr_err("L2X0 cache will be kept disabled.\n");

include/linux/isa.h

52

pr_err("%s: Number of irq (%u) does not match number of base (%u)\n", \

include/linux/kexec.h

291

pr_err("RELA relocation unsupported.\n");

include/linux/kexec.h

310

pr_err("REL relocation unsupported.\n");

include/linux/kvm_host.h

881

pr_err("kvm [%i]: " fmt, task_pid_nr(current), ## __VA_ARGS__)

include/linux/net.h

280

net_ratelimited_function(pr_err, fmt, ##__VA_ARGS__)

include/linux/netpoll.h

45

pr_err("%s: " fmt, np->name, ##__VA_ARGS__)

include/linux/qed/qed_if.h

1242

pr_err("[%s:%d(%s)]" fmt, \

include/linux/skbuff.h

2830

pr_err("__skb_pull(len=%u)\n", len);

include/linux/soc/qcom/ubwc.h

72

pr_err("UBWC config discrepancy - level 1 swizzling disabled on UBWC 1.0\n");

include/media/drv-intf/saa7146.h

31

#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)

include/net/caif/caif_layer.h

28

pr_err("caif:Assert detected:'%s'\n", #assert); \

include/net/ip_vs.h

222

pr_err(msg); \

include/net/ip_vs.h

265

pr_err(msg, ##__VA_ARGS__); \

include/xen/hvm.h

48

pr_err("Cannot get hvm parameter %s (%d): %d!\n",

init/do_mounts.c

222

pr_err("Can't find any bdev filesystem to be used for mount!\n");

init/do_mounts.c

224

pr_err("List of all bdev filesystems:\n");

init/do_mounts.c

226

pr_err(" %s", p);

init/do_mounts.c

227

pr_err("\n");

init/do_mounts.c

282

pr_err("VFS: Unable to mount root fs via NFS.\n");

init/do_mounts.c

319

pr_err("VFS: Unable to mount root fs via SMB.\n");

init/do_mounts.c

447

pr_err("Disabling rootwait; root= is invalid.\n");

init/do_mounts.c

488

pr_err("VFS: Failed to pivot into new rootfs\n");

init/do_mounts.c

492

pr_err("VFS: Failed to unmount old rootfs\n");

init/initramfs.c

368

pr_err("initramfs name without nulterm: %.*s\n",

init/initramfs.c

439

pr_err("initramfs symlink without nulterm: %.*s\n",

init/initramfs.c

556

pr_err("compression method %s not configured\n",

init/initramfs.c

629

pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region",

init/initramfs.c

635

pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region\n",

init/initramfs.c

712

pr_err("/initrd.image: incomplete write (%zd != %ld)\n",

init/initramfs.c

755

pr_err("Failed to create initrd sysfs file");

init/main.c

1513

pr_err("Starting init: %s exists but couldn't execute it (error %d)\n",

init/main.c

1611

pr_err("Failed to execute %s (error %d)\n",

init/main.c

1632

pr_err("Default init %s failed (error %d)\n",

init/main.c

1654

pr_err("Warning: unable to open an initial console.\n");

init/main.c

299

pr_err("bootconfig size %d is greater than initrd size %ld\n",

init/main.c

305

pr_err("bootconfig checksum failed\n");

init/main.c

388

pr_err("Failed to allocate memory for extra kernel cmdline.\n");

init/main.c

394

pr_err("Failed to print extra kernel cmdline.\n");

init/main.c

445

pr_err("'bootconfig' found on command line, but no bootconfig found\n");

init/main.c

452

pr_err("bootconfig size %ld greater than max size %d\n",

init/main.c

460

pr_err("Failed to init bootconfig: %s.\n", msg);

init/main.c

462

pr_err("Failed to parse bootconfig: %s at %d.\n",

init/main.c

882

pr_err("%s: Failed to allocate %zu bytes\n",

io_uring/mock_file.c

335

pr_err("Could not initialize io_uring mock device\n");

kernel/audit.c

1779

pr_err("audit: invalid 'audit' parameter value (%s)\n", str);

kernel/audit.c

1786

pr_err("audit: error setting audit state (%d)\n",

kernel/audit.c

348

pr_err("%s\n", message);

kernel/audit_tree.c

797

pr_err("cannot start thread audit_prune_tree");

kernel/auditfilter.c

251

pr_err("AUDIT_FILTER_ENTRY is deprecated\n");

kernel/auditfilter.c

263

pr_err("AUDIT_POSSIBLE is deprecated\n");

kernel/bpf/btf.c

8493

pr_err("missing vmlinux BTF, cannot register %s\n", feature);

kernel/bpf/btf.c

9048

pr_err("cannot register more than %d kfunc destructors\n", BTF_DTOR_KFUNC_MAX_CNT);

kernel/bpf/btf.c

9071

pr_err("cannot register more than %d kfunc destructors\n", BTF_DTOR_KFUNC_MAX_CNT);

kernel/bpf/inode.c

949

pr_err("bpf_preload module get failed.\n");

kernel/bpf/log.c

71

pr_err("BPF: %s%s", log->kbuf, newline ? "" : "\n");

kernel/cfi.c

18

pr_err("CFI failure at %pS (target: %pS; expected type: 0x%08x)\n",

kernel/cfi.c

21

pr_err("CFI failure at %pS (no target information)\n",

kernel/cgroup/cpuset-v1.c

269

pr_err("cpuset: failed to transfer tasks out of empty cpuset ");

kernel/cpu.c

1544

pr_err("Failed to offline CPU%d - error=%d",

kernel/cpu.c

1686

pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n",

kernel/cpu.c

1757

pr_err("Failed to bring hibernate-CPU up!\n");

kernel/cpu.c

1923

pr_err("Error taking CPU%d down: %d\n", cpu, error);

kernel/cpu.c

1931

pr_err("Non-boot CPUs are not disabled\n");

kernel/cpu.c

378

pr_err("CPU%u failed to report dead state\n", cpu);

kernel/cpu.c

444

pr_err("CPU%u failed to report alive state\n", cpu);

kernel/crash_core.c

626

pr_err("unable to locate elfcorehdr segment");

kernel/crash_dump_dm_crypt.c

164

pr_err("Key size %u exceeds maximum (%u)\n", ukp->datalen, KEY_SIZE_MAX);

kernel/crash_dump_dm_crypt.c

206

pr_err("The key description shouldn't exceed %u characters", KEY_DESC_MAX_LEN);

kernel/crash_dump_dm_crypt.c

251

pr_err("Only %u keys at maximum to be created\n", KEY_NUM_MAX);

kernel/crash_dump_dm_crypt.c

460

pr_err("Error %d while registering subsystem %s\n", ret,

kernel/crash_reserve.c

376

pr_err("cannot allocate crashkernel low memory (size:0x%llx).\n", low_size);

kernel/debug/debug_core.c

1120

pr_err("KGDB I/O driver %s can't replace %s.\n",

kernel/debug/debug_core.c

196

pr_err("Critical breakpoint error, kernel memory destroyed at: %lx\n",

kernel/debug/debug_core.c

431

pr_err("breakpoint remove failed: %lx\n",

kernel/dma/coherent.c

379

pr_err("Reserved memory: regions without no-map are not yet supported\n");

kernel/dma/coherent.c

72

pr_err("Reserved memory: failed to init DMA memory pool at %pa, size %zd MiB\n",

kernel/dma/contiguous.c

490

pr_err("Reserved memory: incorrect alignment of CMA region\n");

kernel/dma/contiguous.c

496

pr_err("Reserved memory: unable to setup CMA region\n");

kernel/dma/contiguous.c

76

pr_err("Config string not provided\n");

kernel/dma/debug.c

692

pr_err("debugging out of memory - disabling\n");

kernel/dma/debug.c

907

pr_err("dma_debug_add_bus: out of memory\n");

kernel/dma/debug.c

940

pr_err("debugging out of memory error - disabled\n");

kernel/dma/map_benchmark.c

134

pr_err("create dma_map thread failed\n");

kernel/dma/map_benchmark.c

214

pr_err("invalid thread number\n");

kernel/dma/map_benchmark.c

220

pr_err("invalid duration seconds\n");

kernel/dma/map_benchmark.c

225

pr_err("invalid transmission delay\n");

kernel/dma/map_benchmark.c

232

pr_err("invalid numa node\n");

kernel/dma/map_benchmark.c

237

pr_err("invalid granule size\n");

kernel/dma/map_benchmark.c

252

pr_err("invalid DMA direction\n");

kernel/dma/map_benchmark.c

261

pr_err("failed to set dma_mask on device %s\n",

kernel/dma/map_benchmark.c

314

pr_err("Can't add debugfs remove action\n");

kernel/dma/map_benchmark.c

64

pr_err("dma_map_single failed on %s\n",

kernel/dma/pool.c

177

pr_err("DMA: failed to allocate %zu KiB %pGg pool for atomic allocation\n",

kernel/hung_task.c

177

pr_err("INFO: task %s:%d is blocked on a mutex, but the owner is not found.\n",

kernel/hung_task.c

181

pr_err("INFO: task %s:%d is blocked on a semaphore, but the last holder is not found.\n",

kernel/hung_task.c

186

pr_err("INFO: task %s:%d is blocked on an rw-semaphore, but the owner is not found.\n",

kernel/hung_task.c

200

pr_err("INFO: task %s:%d is blocked on a mutex likely owned by task %s:%d.\n",

kernel/hung_task.c

204

pr_err("INFO: task %s:%d blocked on a semaphore likely last held by task %s:%d\n",

kernel/hung_task.c

209

pr_err("INFO: task %s:%d <%s> blocked on an rw-semaphore likely owned by task %s:%d <%s>\n",

kernel/hung_task.c

255

pr_err("INFO: task %s:%d blocked for more than %ld seconds.\n",

kernel/hung_task.c

257

pr_err(" %s %s %.*s\n",

kernel/hung_task.c

262

pr_err(" Blocked by coredump.\n");

kernel/hung_task.c

263

pr_err("\"echo 0 > /proc/sys/kernel/hung_task_timeout_secs\""

kernel/irq/handle.c

157

pr_err("Unable to parse irqhandler.duration_warn_us setting: ret=%d\n", ret);

kernel/irq/handle.c

162

pr_err("Invalid irqhandler.duration_warn_us setting, must be > 0\n");

kernel/irq/ipi-mux.c

172

pr_err("unable to create IPI Mux fwnode\n");

kernel/irq/ipi-mux.c

180

pr_err("unable to add IPI Mux domain\n");

kernel/irq/ipi-mux.c

190

pr_err("unable to alloc IRQs from IPI Mux domain\n");

kernel/irq/irqdomain.c

233

pr_err("Invalid fwnode type for irqdomain\n");

kernel/irq/irqdomain.c

764

pr_err("ERROR: no free irqs available below %lu maximum\n",

kernel/irq/manage.c

1189

pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",

kernel/irq/manage.c

1576

pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",

kernel/irq/manage.c

1603

pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n",

kernel/irq/manage.c

1610

pr_err("Overlapping affinities for %s (irq %d) on irqchip %s.\n",

kernel/irq/manage.c

1709

pr_err("Threaded irq requested with handler=NULL and !ONESHOT for %s (irq %d)\n",

kernel/irq/manage.c

1819

pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",

kernel/irq/manage.c

2658

pr_err("Failed to setup NMI delivery: irq %u\n", irq);

kernel/irq/manage.c

972

pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n",

kernel/irq/spurious.c

158

pr_err("irq event %d: bogus return value %x\n", irq, action_ret);

kernel/irq/spurious.c

160

pr_err("irq %d: nobody cared (try booting with the \"irqpoll\" option)\n", irq);

kernel/irq/spurious.c

162

pr_err("handlers:\n");

kernel/irq/spurious.c

172

pr_err("[<%p>] %ps", action->handler, action->handler);

kernel/kcov.c

1099

pr_err("running self test\n");

kernel/kcov.c

1116

pr_err("done running self test\n");

kernel/kcsan/debugfs.c

148

pr_err("could not find function: '%s'\n", func);

kernel/kcsan/report.c

374

pr_err(" |\n +-> reordered to: %pS\n", (void *)reordered_to);

kernel/kcsan/report.c

386

pr_err("\n");

kernel/kcsan/report.c

427

pr_err("==================================================================\n");

kernel/kcsan/report.c

436

pr_err("BUG: KCSAN: %s in %ps / %ps\n",

kernel/kcsan/report.c

441

pr_err("BUG: KCSAN: %s in %pS\n", get_bug_type(ai->access_type),

kernel/kcsan/report.c

445

pr_err("\n");

kernel/kcsan/report.c

449

pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",

kernel/kcsan/report.c

461

pr_err("\n");

kernel/kcsan/report.c

462

pr_err("%s to 0x%px of %zu bytes by %s on cpu %i:\n",

kernel/kcsan/report.c

466

pr_err("race at unknown origin, with %s to 0x%px of %zu bytes by %s on cpu %i:\n",

kernel/kcsan/report.c

483

pr_err("\n");

kernel/kcsan/report.c

484

pr_err("value changed: 0x%0*llx -> 0x%0*llx\n",

kernel/kcsan/report.c

487

pr_err(" bits changed: 0x%0*llx with mask 0x%0*llx\n",

kernel/kcsan/report.c

494

pr_err("\n");

kernel/kcsan/report.c

495

pr_err("Reported by Kernel Concurrency Sanitizer on:\n");

kernel/kcsan/report.c

497

pr_err("==================================================================\n");

kernel/kcsan/selftest.c

131

pr_err("improperly instrumented type=(" #access_type "): " name "\n"); \

kernel/kcsan/selftest.c

249

pr_err("selftest: " #do_test " failed"); \

kernel/kcsan/selftest.c

69

pr_err("%s fail: %s %zu bytes @ %lx -> encoded: %lx -> %s %zu bytes @ %lx\n",

kernel/kexec.c

70

pr_err("Could not allocate control_code_buffer\n");

kernel/kexec.c

77

pr_err("Could not allocate swap buffer\n");

kernel/kexec_core.c

1007

pr_err("Could not map ima buffer.\n");

kernel/kexec_core.c

1353

pr_err("failed to create kexec kobject\n");

kernel/kexec_core.c

1366

pr_err("Unable to create %s symlink (%d)", kexec_links[i].name, error);

kernel/kexec_core.c

980

pr_err("Could not allocate ima pages array.\n");

kernel/kexec_elf.c

339

pr_err("Not an ELF executable.\n");

kernel/kexec_elf.c

342

pr_err("No ELF program header.\n");

kernel/kexec_elf.c

353

pr_err("Requires an ELF interpreter.\n");

kernel/kexec_file.c

1239

pr_err("symbol %s size mismatch: expected %lu actual %u\n",

kernel/kexec_file.c

1247

pr_err("symbol %s is in a bss section. Cannot %s\n", name,

kernel/kexec_file.c

341

pr_err("Could not allocate control_code_buffer\n");

kernel/kexec_file.c

348

pr_err("Could not allocate swap buffer\n");

kernel/kprobes.c

2091

pr_err("kretprobe: Return address not found, not execute handler. Maybe there is a bug in the kernel.\n");

kernel/kprobes.c

2492

pr_err("Dump kprobe:\n.symbol_name = %s, .offset = %x, .addr = %pS\n",

kernel/kprobes.c

2759

pr_err("Failed to populate blacklist (error %d), kprobes not restricted, be careful using them!\n", err);

kernel/kprobes.c

2767

pr_err("Failed to lookup symbol '%s' for kretprobe blacklist. Maybe the target function is removed or renamed.\n",

kernel/livepatch/core.c

1123

pr_err("module %s is not marked as a livepatch module\n",

kernel/livepatch/core.c

1139

pr_err("Livepatch patch (%s) is not compatible with the already installed livepatches.\n",

kernel/livepatch/core.c

1269

pr_err("vmlinux.ko: invalid module name\n");

kernel/livepatch/core.c

180

pr_err("symbol '%s' not found in symbol table\n", name);

kernel/livepatch/core.c

182

pr_err("unresolvable ambiguity for symbol '%s' in object '%s'\n",

kernel/livepatch/core.c

185

pr_err("symbol position %lu for symbol '%s' in object '%s' not found\n",

kernel/livepatch/core.c

226

pr_err("symbol %s at rela sec %u idx %d is not marked as a livepatch symbol\n",

kernel/livepatch/core.c

236

pr_err("symbol %s has an incorrectly formatted name\n",

kernel/livepatch/core.c

250

pr_err("invalid access to vmlinux symbol '%s' from module-specific livepatch relocation section\n",

kernel/livepatch/core.c

315

pr_err("section %s has an incorrectly formatted name\n",

kernel/livepatch/core.c

894

pr_err("kallsyms size lookup failed for '%s'\n",

kernel/livepatch/core.c

905

pr_err("kallsyms size lookup failed for '%s' replacement\n",

kernel/livepatch/patch.c

177

pr_err("failed to find location for function '%s'\n",

kernel/livepatch/patch.c

201

pr_err("failed to set ftrace filter for function '%s' (%d)\n",

kernel/livepatch/patch.c

208

pr_err("failed to register ftrace handler for function '%s' (%d)\n",

kernel/livepatch/shadow.c

150

pr_err("Failed to construct shadow variable <%p, %lx> (%d)\n",

kernel/liveupdate/kexec_handover.c

489

pr_err("failed to get preserved memory bitmaps\n");

kernel/liveupdate/kexec_handover.c

662

pr_err("Failed to reserve scratch array\n");

kernel/liveupdate/kexec_handover.c

674

pr_err("Failed to reserve lowmem scratch buffer\n");

kernel/liveupdate/kexec_handover.c

686

pr_err("Failed to reserve global scratch buffer\n");

kernel/liveupdate/kexec_handover.c

704

pr_err("Failed to reserve nid %d scratch buffer\n", nid);

kernel/liveupdate/kexec_handover_debugfs.c

172

pr_err("failed exposing handover FDT in debugfs: %pe\n",

kernel/liveupdate/luo_core.c

106

pr_err("FDT '%s' is incompatible with '%s' [%d]\n",

kernel/liveupdate/luo_core.c

116

pr_err("Unable to get live update number '%s' [%d]\n",

kernel/liveupdate/luo_core.c

159

pr_err("failed to allocate/preserve FDT memory\n");

kernel/liveupdate/luo_core.c

184

pr_err("failed to prepare LUO FDT: %d\n", err);

kernel/liveupdate/luo_core.c

235

pr_err("kho_finalize failed %d\n", err);

kernel/liveupdate/luo_core.c

94

pr_err("failed to retrieve FDT '%s' from KHO: %pe\n",

kernel/liveupdate/luo_file.c

856

pr_err("File handler registration failed: Compatible string '%s' already registered.\n",

kernel/liveupdate/luo_flb.c

588

pr_err("Unable to get FLB node [%s]\n", LUO_FDT_FLB_NODE_NAME);

kernel/liveupdate/luo_flb.c

596

pr_err("FLB node is incompatible with '%s' [%d]\n",

kernel/liveupdate/luo_flb.c

605

pr_err("Unable to get FLB header property '%s' [%d]\n",

kernel/liveupdate/luo_session.c

482

pr_err("Unable to get session node: [%s]\n",

kernel/liveupdate/luo_session.c

490

pr_err("Session node incompatible [%s]\n",

kernel/liveupdate/luo_session.c

498

pr_err("Unable to get session header '%s' [%d]\n",

kernel/locking/lockdep.c

980

pr_err("INFO: trying to register non-static key.\n");

kernel/locking/lockdep.c

981

pr_err("The code is fine but needs lockdep annotation, or maybe\n");

kernel/locking/lockdep.c

982

pr_err("you didn't initialize this object before use?\n");

kernel/locking/lockdep.c

983

pr_err("turning off the locking correctness validator.\n");

kernel/locking/locktorture.c

1048

pr_err("lock_torture_stats_print: Out of memory, need: %d",

kernel/locking/locktorture.c

1060

pr_err("lock_torture_stats_print: Out of memory, need: %d",

kernel/locking/test-ww_mutex.c

137

pr_err("%s: initial lock failed!\n", __func__);

kernel/locking/test-ww_mutex.c

143

pr_err("%s: initial trylock failed!\n", __func__);

kernel/locking/test-ww_mutex.c

149

pr_err("%s: trylocked itself without context from %s!\n", __func__, from);

kernel/locking/test-ww_mutex.c

156

pr_err("%s: trylocked itself with context from %s!\n", __func__, from);

kernel/locking/test-ww_mutex.c

164

pr_err("%s: missed deadlock for recursing, ret=%d from %s\n",

kernel/locking/test-ww_mutex.c

268

pr_err("%s: failed to resolve ABBA deadlock, A err=%d, B err=%d\n",

kernel/locking/test-ww_mutex.c

274

pr_err("%s: missed ABBA deadlock, A err=%d, B err=%d\n",

kernel/locking/test-ww_mutex.c

363

pr_err("cyclic deadlock not resolved, ret[%d/%d] = %d\n",

kernel/locking/test-ww_mutex.c

711

pr_err("Test already running\n");

kernel/locking/test-ww_mutex.c

99

pr_err("%s(flags=%x): mutual exclusion failure\n",

kernel/module/decompress.c

109

pr_err("failed to initialize decompressor: %d\n", rc);

kernel/module/decompress.c

131

pr_err("decompression failed with status %d\n", rc);

kernel/module/decompress.c

161

pr_err("not an xz compressed module\n");

kernel/module/decompress.c

191

pr_err("decompression failed with status %d\n", xz_ret);

kernel/module/decompress.c

223

pr_err("not a zstd compressed module\n");

kernel/module/decompress.c

233

pr_err("ZSTD-compressed data has an incomplete frame header\n");

kernel/module/decompress.c

238

pr_err("ZSTD-compressed data has too large a window size\n");

kernel/module/decompress.c

252

pr_err("Can't initialize ZSTD stream\n");

kernel/module/decompress.c

279

pr_err("ZSTD-decompression failed with status %d\n", retval);

kernel/module/decompress.c

96

pr_err("not a gzip compressed module\n");

kernel/module/main.c

1200

pr_err(

kernel/module/main.c

1217

pr_err("%s: module using GPL-only symbols uses symbols %s from proprietary module %s.\n",

kernel/module/main.c

1426

pr_err("%s: adding tainted module to the unloaded tainted modules list failed.\n",

kernel/module/main.c

1486

pr_err("%s: exports duplicate symbol %s"

kernel/module/main.c

1572

pr_err("%s: Symbol %s has an invalid section index %u (max %u)\n",

kernel/module/main.c

1780

pr_err("%s: module tries to import module namespace: %s\n",

kernel/module/main.c

1848

pr_err("Invalid ELF header len %lu\n", info->len);

kernel/module/main.c

1852

pr_err("Invalid ELF header magic: != %s\n", ELFMAG);

kernel/module/main.c

1856

pr_err("Invalid ELF header type: %u != %u\n",

kernel/module/main.c

1861

pr_err("Invalid architecture in ELF header: %u\n",

kernel/module/main.c

1866

pr_err("Invalid module architecture in ELF header: %u\n",

kernel/module/main.c

1901

pr_err("Invalid ELF section header size\n");

kernel/module/main.c

1913

pr_err("Invalid ELF section header overflow\n");

kernel/module/main.c

1926

pr_err("ELF Spec violation: section 0 type(%d)!=SH_NULL or non-zero len or addr\n",

kernel/module/main.c

1942

pr_err("Invalid ELF section in module (section %u type %u)\n",

kernel/module/main.c

1980

pr_err("Invalid ELF section name index: %d || e_shstrndx (%d) >= e_shnum (%d)\n",

kernel/module/main.c

1995

pr_err("empty section name table\n");

kernel/module/main.c

1999

pr_err("ELF Spec violation: section name table isn't null terminated\n");

kernel/module/main.c

2009

pr_err("Invalid ELF section name in module (section %u type %u)\n",

kernel/module/main.c

2041

pr_err("Only one .modinfo section must exist.\n");

kernel/module/main.c

2083

pr_err("module %s: Exactly one .gnu.linkonce.this_module section must exist.\n",

kernel/module/main.c

2091

pr_err("module %s: .gnu.linkonce.this_module section must have a size set\n",

kernel/module/main.c

2097

pr_err("module %s: .gnu.linkonce.this_module must occupy memory during process execution\n",

kernel/module/main.c

2103

pr_err("module %s: .gnu.linkonce.this_module section size must match the kernel's built struct module size at run time\n",

kernel/module/main.c

2163

pr_err("Invalid ELF sh_link!=SHN_UNDEF(%d) or (sh_link(%d) >= hdr->e_shnum(%d)\n",

kernel/module/main.c

2217

pr_err("extended version crc+name presence does not match");

kernel/module/main.c

2234

pr_err("more extended version crcs than names");

kernel/module/main.c

2320

pr_err("empty symbol string table\n");

kernel/module/main.c

2324

pr_err("symbol string table missing leading NUL\n");

kernel/module/main.c

2328

pr_err("symbol string table isn't NUL terminated\n");

kernel/module/main.c

2338

pr_err("symbol name out of bounds in string table");

kernel/module/main.c

2423

pr_err("%s: module is marked as livepatch module, but livepatch support is disabled",

kernel/module/main.c

2594

pr_err("%s: version magic '%s' should be '%s'\n",

kernel/module/main.c

3331

pr_err("Module %s is blacklisted\n", info->name);

kernel/module/strict_rwx.c

102

pr_err("%s: section %s (index %d) has invalid WRITE|EXEC flags\n",

kernel/module/sysfs.c

338

pr_err("%s: module sysfs not initialized\n", mod->name);

kernel/module/sysfs.c

345

pr_err("%s: module is already loaded\n", mod->name);

kernel/module_signature.c

28

pr_err("%s: not signed with expected PKCS#7 message\n",

kernel/module_signature.c

40

pr_err("%s: PKCS#7 signature info has unexpected non-zero params\n",

kernel/params.c

196

pr_err("%s: Unknown parameter `%s'\n", doing, param);

kernel/params.c

199

pr_err("%s: `%s' too large for parameter `%s'\n",

kernel/params.c

203

pr_err("%s: `%s' invalid for parameter `%s'\n",

kernel/params.c

268

pr_err("%s: string parameter too long\n", kp->name);

kernel/params.c

440

pr_err("%s: can only take %i arguments\n", name, max);

kernel/params.c

459

pr_err("%s: needs at least %i arguments\n", name, min);

kernel/params.c

519

pr_err("%s: string doesn't fit in %u chars.\n",

kernel/power/hibernate.c

1065

pr_err("%s compression is not available\n", hib_comp_algo);

kernel/power/hibernate.c

330

pr_err("Some devices failed to power down, aborting\n");

kernel/power/hibernate.c

348

pr_err("Some system devices failed to power down, aborting\n");

kernel/power/hibernate.c

363

pr_err("Error %d creating image\n", error);

kernel/power/hibernate.c

522

pr_err("Some devices failed to power down, aborting resume\n");

kernel/power/hibernate.c

751

pr_err("Swap will be unusable! Try swapon -a.\n");

kernel/power/hibernate.c

773

pr_err("Failed to load image, recovering.\n");

kernel/power/hibernate.c

805

pr_err("%s compression is not available\n", hib_comp_algo);

kernel/power/process.c

89

pr_err("Freezing %s %s after %d.%03d seconds "

kernel/power/qos.c

523

pr_err("%s: %s setup failed\n", __func__,

kernel/power/qos.c

529

pr_err("%s: %s setup failed\n", __func__,

kernel/power/snapshot.c

1837

pr_err("Cannot allocate original bitmap\n");

kernel/power/snapshot.c

1843

pr_err("Cannot allocate copy bitmap\n");

kernel/power/snapshot.c

1849

pr_err("Cannot allocate zero bitmap\n");

kernel/power/snapshot.c

1940

pr_err("Image allocation is %lu pages short\n",

kernel/power/snapshot.c

2327

pr_err("Image mismatch: %s\n", reason);

kernel/power/snapshot.c

2380

pr_err(FW_BUG "Memory map mismatch at 0x%llx after hibernation\n",

kernel/power/suspend.c

429

pr_err("late suspend of devices failed\n");

kernel/power/suspend.c

438

pr_err("noirq suspend of devices failed\n");

kernel/power/suspend.c

525

pr_err("Some devices failed to suspend, or early wake event detected\n");

kernel/power/swap.c

1223

pr_err("Failed to allocate %s page\n", hib_comp_algo);

kernel/power/swap.c

1230

pr_err("Failed to allocate %s data\n", hib_comp_algo);

kernel/power/swap.c

1237

pr_err("Failed to allocate crc\n");

kernel/power/swap.c

1253

pr_err("Could not allocate comp stream %ld\n", PTR_ERR(data[thr].cc));

kernel/power/swap.c

1260

pr_err("Could not allocate comp request\n");

kernel/power/swap.c

1270

pr_err("Cannot start decompression threads\n");

kernel/power/swap.c

1292

pr_err("Cannot start CRC32 thread\n");

kernel/power/swap.c

1317

pr_err("Failed to allocate %s pages\n", hib_comp_algo);

kernel/power/swap.c

1389

pr_err("Invalid %s compressed length\n", hib_comp_algo);

kernel/power/swap.c

1440

pr_err("%s decompression failed\n", hib_comp_algo);

kernel/power/swap.c

1447

pr_err("Invalid %s uncompressed length\n", hib_comp_algo);

kernel/power/swap.c

1491

pr_err("Invalid image CRC32!\n");

kernel/power/swap.c

1642

pr_err("Cannot find swsusp signature!\n");

kernel/power/swap.c

322

pr_err("Swap header not found!\n");

kernel/power/swap.c

401

pr_err("Cannot find swap device, try swapon -a\n");

kernel/power/swap.c

721

pr_err("Failed to allocate %s page\n", hib_comp_algo);

kernel/power/swap.c

728

pr_err("Failed to allocate %s data\n", hib_comp_algo);

kernel/power/swap.c

735

pr_err("Failed to allocate crc\n");

kernel/power/swap.c

749

pr_err("Could not allocate comp stream %ld\n", PTR_ERR(data[thr].cc));

kernel/power/swap.c

756

pr_err("Could not allocate comp request\n");

kernel/power/swap.c

766

pr_err("Cannot start compression threads\n");

kernel/power/swap.c

788

pr_err("Cannot start CRC32 thread\n");

kernel/power/swap.c

849

pr_err("%s compression failed\n", hib_comp_algo);

kernel/power/swap.c

856

pr_err("Invalid %s compressed length\n", hib_comp_algo);

kernel/power/swap.c

897

pr_err("Image saving failed: %d\n", ret);

kernel/power/swap.c

954

pr_err("Cannot get swap writer\n");

kernel/power/swap.c

959

pr_err("Not enough free swap\n");

kernel/printk/braille.c

28

pr_err("need port name after brl=\n");

kernel/printk/printk.c

1048

pr_err("log_buf over 2G is not supported.\n");

kernel/printk/printk.c

1188

pr_err("new_log_buf_len: %lu too small\n", new_log_buf_len);

kernel/printk/printk.c

1194

pr_err("log_buf_len: %lu text bytes not available\n",

kernel/printk/printk.c

1202

pr_err("log_buf_len: %zu desc bytes not available\n",

kernel/printk/printk.c

1210

pr_err("log_buf_len: %zu info bytes not available\n",

kernel/printk/printk.c

1255

pr_err("dropped %llu messages\n",

kernel/printk/printk.c

3729

pr_err("failed to start legacy printing thread\n");

kernel/range.c

105

pr_err("%s: run out of slot in ranges\n",

kernel/rcu/rcutorture.c

3710

pr_err("barrier_cbs_invoked = %d, n_barrier_cbs = %d\n",

kernel/rcu/rcutorture.c

3726

pr_err("Recovered: barrier_cbs_invoked = %d\n",

kernel/rcu/tasks.h

1106

pr_err("INFO: rcu_tasks detected stalls on tasks:\n");

kernel/rcu/tasks.h

1522

pr_err("%s has failed boot-time tests.\n", tests[i].name);

kernel/rcu/tiny.c

165

pr_err("%s(): Double-freed CB %p->%pS()!!! ", __func__, head, head->func);

kernel/rcu/tree.c

3123

pr_err("%s(): Double-freed CB %p->%pS()!!! ", __func__, head, head->func);

kernel/rcu/tree.c

4191

pr_err("Failed to create par gp kworker on %d/%d\n",

kernel/rcu/tree.c

4211

pr_err("Failed to create %s!\n", name);

kernel/rcu/tree_exp.h

567

pr_err("INFO: %s detected expedited stalls, but suppressed full report due to a stuck CSD-lock.\n", rcu_state.name);

kernel/rcu/tree_exp.h

570

pr_err("INFO: %s detected expedited stalls on CPUs/tasks: {", rcu_state.name);

kernel/rcu/tree_exp.h

596

pr_err("INFO: Expedited stall ended before state dump start\n");

kernel/rcu/tree_exp.h

598

pr_err("blocking rcu_node structures (internal RCU debug):");

kernel/rcu/tree_nocb.h

1296

pr_err("Failed to allocate lazy_rcu shrinker!\n");

kernel/rcu/tree_stall.h

338

pr_err("\tTasks blocked on level-%d rcu_node (CPUs %d-%d):",

kernel/rcu/tree_stall.h

407

pr_err("INFO: Stall ended during stack backtracing.\n");

kernel/rcu/tree_stall.h

415

pr_err("Offline CPU %d blocking current GP.\n", cpu);

kernel/rcu/tree_stall.h

495

pr_err("\t hardirqs softirqs csw/system\n");

kernel/rcu/tree_stall.h

496

pr_err("\t number: %8lld %10d %12lld\n",

kernel/rcu/tree_stall.h

500

pr_err("\tcputime: %8lld %10lld %12lld ==> %d(ms)\n",

kernel/rcu/tree_stall.h

549

pr_err("\t%d-%c%c%c%c: (%lu %s) idle=%04x/%ld/%#lx softirq=%u/%u fqs=%ld%s%s\n",

kernel/rcu/tree_stall.h

577

pr_err("%s kthread starved for %ld jiffies! g%ld f%#x %s(%d) ->state=%#x ->cpu=%d\n",

kernel/rcu/tree_stall.h

587

pr_err("\tUnless %s kthread gets sufficient CPU time, OOM is now expected behavior.\n", rcu_state.name);

kernel/rcu/tree_stall.h

588

pr_err("RCU grace-period kthread stack dump:\n");

kernel/rcu/tree_stall.h

591

pr_err("RCU GP kthread last ran on offline CPU %d.\n", cpu);

kernel/rcu/tree_stall.h

593

pr_err("Stack dump where RCU GP kthread last ran:\n");

kernel/rcu/tree_stall.h

620

pr_err("%s kthread timer wakeup didn't happen for %ld jiffies! g%ld f%#x %s(%d) ->state=%#x\n",

kernel/rcu/tree_stall.h

626

pr_err("\tPossible timer handling issue on cpu=%d timer-softirq=%u\n",

kernel/rcu/tree_stall.h

656

pr_err("INFO: %s detected stalls on CPUs/tasks:\n", rcu_state.name);

kernel/rcu/tree_stall.h

672

pr_err("\t(detected by %d, t=%ld jiffies, g=%ld, q=%lu ncpus=%d)\n",

kernel/rcu/tree_stall.h

684

pr_err("INFO: Stall ended before state dump start\n");

kernel/rcu/tree_stall.h

688

pr_err("All QSes seen, last %s kthread activity %ld (%ld-%ld), jiffies_till_next_fqs=%ld, root ->qsmask %#lx\n",

kernel/rcu/tree_stall.h

732

pr_err("INFO: %s self-detected stall on CPU\n", rcu_state.name);

kernel/rcu/tree_stall.h

738

pr_err("\t(t=%lu jiffies g=%ld q=%lu ncpus=%d)\n",

kernel/rcu/tree_stall.h

850

pr_err("INFO: %s detected stall, but suppressed full report due to a stuck CSD-lock.\n", rcu_state.name);

kernel/reboot.c

1140

pr_err("Ignoring the CPU number in reboot= option. "

kernel/relay.c

448

pr_err("relay: cpu %d buffer creation failed\n", cpu);

kernel/resource.c

1213

pr_err("requested range [0x%llx-0x%llx] not in root %pr\n",

kernel/resource.c

1223

pr_err("fixing request to [0x%llx-0x%llx]\n",

kernel/resource.c

2182

pr_err("Cannot mount iomem pseudo filesystem: %d\n", rc);

kernel/resource.c

2189

pr_err("Cannot allocate inode for iomem: %d\n", rc);

kernel/sched/core.c

5842

pr_err("Preemption disabled at:");

kernel/sched/core.c

8829

pr_err("Preemption disabled at:");

kernel/sched/core.c

8865

pr_err("BUG: sleeping function called from invalid context at %s:%d\n",

kernel/sched/core.c

8867

pr_err("in_atomic(): %d, irqs_disabled(): %d, non_block: %d, pid: %d, name: %s\n",

kernel/sched/core.c

8870

pr_err("preempt_count: %x, expected: %x\n", preempt_count(),

kernel/sched/core.c

8874

pr_err("RCU nest depth: %d, expected: %u\n",

kernel/sched/core.c

8942

pr_err("BUG: assuming non migratable context at %s:%d\n", file, line);

kernel/sched/core.c

8943

pr_err("in_atomic(): %d, irqs_disabled(): %d, migration_disabled() %u pid: %d, name: %s\n",

kernel/sched/cpufreq_schedutil.c

685

pr_err("failed to create sugov thread: %pe\n", thread);

kernel/sched/cpufreq_schedutil.c

817

pr_err("initialization failed (error %d)\n", ret);

kernel/sched/debug.c

1388

pr_err("sched: CPU %d need_resched set for > %llu ns (%d ticks) without schedule\n",

kernel/sched/ext.c

4456

pr_err("sched_ext: BPF scheduler \"%s\" disabled (%s)\n",

kernel/sched/ext.c

4460

pr_err("sched_ext: %s: %s\n", sch->ops.name, ei->msg);

kernel/sched/ext.c

5331

pr_err("sched_ext: Not compatible with \"isolcpus=\" domain isolation\n");

kernel/sched/ext.c

7500

pr_err("sched_ext: Failed to register kfunc sets (%d)\n", ret);

kernel/sched/ext.c

7506

pr_err("sched_ext: Failed to initialize idle tracking (%d)\n", ret);

kernel/sched/ext.c

7512

pr_err("sched_ext: Failed to register struct_ops (%d)\n", ret);

kernel/sched/ext.c

7518

pr_err("sched_ext: Failed to register PM notifier (%d)\n", ret);

kernel/sched/ext.c

7524

pr_err("sched_ext: Failed to create /sys/kernel/sched_ext\n");

kernel/sched/ext.c

7530

pr_err("sched_ext: Failed to add global attributes\n");

kernel/sched/ext.c

7536

pr_err("sched_ext: Failed to allocate cpumasks\n");

kernel/sched/topology.c

1938

pr_err("Failed to find a NUMA topology type, defaulting to DIRECT\n");

kernel/sched/topology.c

2479

pr_err("BUG: arch topology borken\n");

kernel/sched/topology.c

2480

pr_err(" the %s domain not a subset of the %s domain\n",

kernel/smpboot.c

55

pr_err("SMP: fork_idle() failed for CPU %u\n", cpu);

kernel/softirq.c

625

pr_err("huh, entered softirq %u %s %p with preempt_count %08x, exited with %08x?\n",

kernel/static_call_inline.c

511

pr_err("Failed to allocate memory for static_call!\n");

kernel/time/posix-clock.c

169

pr_err("%s unable to add device %d:%d\n",

kernel/time/sleep_timeout.c

86

pr_err("%s: wrong timeout value %lx\n", __func__, timeout);

kernel/time/timer_migration.c

2028

pr_err("Timer migration setup failed\n");

kernel/trace/preemptirq_delay_test.c

129

pr_err("cpu_affinity:%d, failed\n", cpu_affinity);

kernel/trace/rethook.c

289

pr_err("rethook: Return address not found! Maybe there is a bug in the kernel\n");

kernel/trace/trace.c

10045

pr_err("Unable to allocate trace_init_wq\n");

kernel/trace/trace.c

10230

pr_err("RV: Error while creating the RV interface\n");

kernel/trace/trace.c

1513

pr_err("Unable to allocate tr_max_lat_wq\n");

kernel/trace/trace.c

2250

pr_err("Failed to allocate event buffer\n");

kernel/trace/trace.h

130

DO_ONCE_LITE_IF(condition, pr_err, "ERROR: " fmt, ##__VA_ARGS__)

kernel/trace/trace_boot.c

115

pr_err("Failed to generate probe: %s\n", buf);

kernel/trace/trace_boot.c

121

pr_err("Failed to add probe: %s\n", buf);

kernel/trace/trace_boot.c

132

pr_err("Kprobe event is not supported.\n");

kernel/trace/trace_boot.c

161

pr_err("Failed to add synthetic event: %s\n", buf);

kernel/trace/trace_boot.c

169

pr_err("Synthetic event is not supported.\n");

kernel/trace/trace_boot.c

229

pr_err("hist.%s requires value(s).\n", key);

kernel/trace/trace_boot.c

258

pr_err("hist.%s requires '%s' option.\n",

kernel/trace/trace_boot.c

272

pr_err("hist.%s.%s requires value(s).\n",

kernel/trace/trace_boot.c

289

pr_err("hist.%s requires an action.\n",

kernel/trace/trace_boot.c

35

pr_err("String is too long: %s\n", p);

kernel/trace/trace_boot.c

358

pr_err("hist requires keys.\n");

kernel/trace/trace_boot.c

40

pr_err("Failed to set option: %s\n", buf);

kernel/trace/trace_boot.c

411

pr_err("hist exceeds the max command length.\n");

kernel/trace/trace_boot.c

436

pr_err("Failed to apply hist trigger: %s\n", tmp);

kernel/trace/trace_boot.c

447

pr_err("Failed to apply hist trigger: %s\n", tmp);

kernel/trace/trace_boot.c

46

pr_err("Failed to set tracing on: %s\n", p);

kernel/trace/trace_boot.c

483

pr_err("Failed to find event: %s:%s\n", group, event);

kernel/trace/trace_boot.c

490

pr_err("filter string is too long: %s\n", p);

kernel/trace/trace_boot.c

492

pr_err("Failed to apply filter: %s\n", buf);

kernel/trace/trace_boot.c

498

pr_err("action string is too long: %s\n", p);

kernel/trace/trace_boot.c

500

pr_err("Failed to apply an action: %s\n", p);

kernel/trace/trace_boot.c

506

pr_err("Failed to apply event actions because CONFIG_HIST_TRIGGERS is not set.\n");

kernel/trace/trace_boot.c

510

pr_err("Failed to enable event node: %s:%s\n",

kernel/trace/trace_boot.c

56

pr_err("Failed to set trace clock: %s\n", p);

kernel/trace/trace_boot.c

571

pr_err("Failed to add %s to ftrace filter\n", p);

kernel/trace/trace_boot.c

581

pr_err("Failed to add %s to ftrace filter\n", p);

kernel/trace/trace_boot.c

601

pr_err("Failed to set given tracer: %s\n", p);

kernel/trace/trace_boot.c

607

pr_err("Failed to allocate snapshot buffer\n");

kernel/trace/trace_boot.c

63

pr_err("Buffer size is too small: %s\n", p);

kernel/trace/trace_boot.c

638

pr_err("Failed to get trace instance %s\n", p);

kernel/trace/trace_boot.c

65

pr_err("Failed to resize trace buffer to %s\n", p);

kernel/trace/trace_boot.c

75

pr_err("Failed to set new CPU mask %s\n", p);

kernel/trace/trace_boot.c

91

pr_err("String is too long: %s\n", p);

kernel/trace/trace_boot.c

96

pr_err("Failed to enable event: %s\n", p);

kernel/trace/trace_dynevent.c

321

pr_err("String is too long: %s%c\n", arg->str, arg->separator);

kernel/trace/trace_dynevent.c

368

pr_err("field string is too long: %s%c%s%c\n", arg_pair->lhs,

kernel/trace/trace_dynevent.c

393

pr_err("String is too long: %s\n", str);

kernel/trace/trace_events.c

3036

pr_err("error code is %d\n", ret);

kernel/trace/trace_events.c

3747

pr_err("Failed to register trigger '%s' on event %s\n",

kernel/trace/trace_events.c

3914

pr_err("%s: module has bad taint, not creating trace events\n",

kernel/trace/trace_hwlat.c

428

pr_err(BANNER "could not start sampling thread\n");

kernel/trace/trace_hwlat.c

495

pr_err(BANNER "could not start sampling thread\n");

kernel/trace/trace_hwlat.c

815

pr_err(BANNER "Cannot start hwlat kthread\n");

kernel/trace/trace_osnoise.c

2009

pr_err(BANNER "could not start sampling thread\n");

kernel/trace/trace_osnoise.c

2959

pr_err(BANNER "Error starting osnoise tracer\n");

kernel/trace/trace_osnoise.c

3014

pr_err(BANNER "Error starting timerlat tracer\n");

kernel/trace/trace_osnoise.c

3102

pr_err(BANNER "Error registering osnoise!\n");

kernel/trace/trace_osnoise.c

3108

pr_err(BANNER "Error registering timerlat!\n");

kernel/trace/trace_printk.c

568

pr_err("Failed to expand tracing buffers for trace_printk() calls\n");

kernel/watchdog_perf.c

207

pr_err("failed to change period to %llu\n", period);

kernel/workqueue.c

2819

pr_err("workqueue: Interrupted when creating a worker thread \"%s\"\n",

kernel/workqueue.c

3290

pr_err("BUG: workqueue leaked atomic, lock or RCU: %s[%d]\n"

kernel/workqueue.c

5662

pr_err("workqueue: Failed to allocate a rescuer for wq \"%s\"\n",

kernel/workqueue.c

5673

pr_err("workqueue: Failed to create a rescuer kthread for wq \"%s\": %pe",

lib/842/842_compress.c

285

pr_err("Invalid templ %x op %d : %x %x %x %x\n",

lib/842/842_compress.c

294

pr_err("Invalid template %x len %x : %x %x %x %x\n",

lib/842/842_compress.c

505

pr_err("Using strict mode, can't compress len %d\n", ilen);

lib/842/842_decompress.c

248

pr_err("Internal error, invalid op %x\n", op);

lib/alloc_tag.c

265

pr_err("%lu allocation tags cannot be references using %d available page flag bits. Memory allocation profiling is disabled!\n",

lib/alloc_tag.c

498

pr_err("%s: alignment %lu is incompatible with allocation tag indexing. Memory allocation profiling is disabled!\n",

lib/alloc_tag.c

555

pr_err("Failed to allocate memory for allocation tags in the module %s. Memory allocation profiling is disabled!\n",

lib/alloc_tag.c

631

pr_err("Failed to allocate memory for allocation tag percpu counters in the module %s\n",

lib/alloc_tag.c

666

pr_err("Failed to map %lu bytes for module allocation tags\n",

lib/alloc_tag.c

842

pr_err("Failed to create %s file\n", ALLOCINFO_FILE_NAME);

lib/alloc_tag.c

849

pr_err("Failed to reserve address space for module tags, errno = %d\n", res);

lib/alloc_tag.c

856

pr_err("Allocation tags registration failed, errno = %pe\n", alloc_tag_cttype);

lib/asn1_decoder.c

374

pr_err("ASN.1 decoder error: Stacks not empty at completion (%u, %u)\n",

lib/asn1_decoder.c

472

pr_err("ASN.1 decoder error: Found reserved opcode (%u) pc=%zu\n",

lib/crypto/aescfb.c

221

pr_err("aes_prepareenckey() failed on vector %d\n", i);

lib/crypto/aescfb.c

228

pr_err("aescfb_encrypt() #1 failed on vector %d\n", i);

lib/crypto/aescfb.c

235

pr_err("aescfb_decrypt() failed on vector %d\n", i);

lib/crypto/aescfb.c

242

pr_err("aescfb_encrypt() #2 failed on vector %d\n", i);

lib/crypto/aesgcm.c

703

pr_err("aesgcm_expandkey() failed on vector %d\n", i);

lib/crypto/aesgcm.c

711

pr_err("aesgcm_decrypt() #1 failed on vector %d\n", i);

lib/crypto/aesgcm.c

719

pr_err("aesgcm_encrypt() failed on vector %d\n", i);

lib/crypto/aesgcm.c

727

pr_err("aesgcm_decrypt() #2 failed on vector %d\n", i);

lib/crypto/chacha20poly1305-selftest.c

8896

pr_err("chacha20poly1305 self-test malloc: FAIL\n");

lib/crypto/chacha20poly1305-selftest.c

8915

pr_err("chacha20poly1305 encryption self-test %zu: FAIL\n",

lib/crypto/chacha20poly1305-selftest.c

8938

pr_err("chacha20poly1305 sg encryption self-test %zu: FAIL\n",

lib/crypto/chacha20poly1305-selftest.c

8959

pr_err("chacha20poly1305 decryption self-test %zu: FAIL\n",

lib/crypto/chacha20poly1305-selftest.c

8981

pr_err("chacha20poly1305 sg decryption self-test %zu: FAIL\n",

lib/crypto/chacha20poly1305-selftest.c

9000

pr_err("xchacha20poly1305 encryption self-test %zu: FAIL\n",

lib/crypto/chacha20poly1305-selftest.c

9021

pr_err("xchacha20poly1305 decryption self-test %zu: FAIL\n",

lib/crypto/chacha20poly1305-selftest.c

9070

pr_err("chacha20poly1305 chunked self-test %zu/%zu/%zu: FAIL\n",

lib/dhry_1.c

229

pr_err("%s: %d (FAIL, expected %d)\n", #val, val, \

lib/dhry_1.c

236

pr_err("%s: %c (FAIL, expected %c)\n", #val, val, \

lib/dhry_1.c

243

pr_err("%s: %s (FAIL, expected %s)\n", #val, val, \

lib/dhry_1.c

263

pr_err("Next_Ptr_Glob->Ptr_Comp: %px (expected %px)\n",

lib/dhry_run.c

53

pr_err("Please increase the number of iterations\n");

lib/dhry_run.c

55

pr_err("Dhrystone benchmark failed error %pe\n", ERR_PTR(n));

lib/digsig.c

225

pr_err("key not found, id: %s\n", name);

lib/dynamic_debug.c

1246

pr_err("error adding module: %s\n", modname);

lib/dynamic_debug.c

300

pr_err("unclosed quote: %s\n", buf);

lib/dynamic_debug.c

307

pr_err("parse err after word:%d=%s\n", nwords,

lib/dynamic_debug.c

315

pr_err("too many words, legal max <=%d\n", maxwords);

lib/dynamic_debug.c

348

pr_err("bad line-number: %s\n", str);

lib/dynamic_debug.c

359

pr_err("match-spec: line used 2x\n");

lib/dynamic_debug.c

376

pr_err("last-line:%d < 1st-line:%d\n",

lib/dynamic_debug.c

395

pr_err("match-spec:%s val:%s overridden by %s\n",

lib/dynamic_debug.c

426

pr_err("expecting pairs of match-spec <value>\n");

lib/dynamic_debug.c

466

pr_err("unknown keyword \"%s\"\n", keyword);

lib/dynamic_debug.c

500

pr_err("bad flag-op %c, at start of %s\n", *str, str);

lib/dynamic_debug.c

513

pr_err("unknown flag '%c'\n", *str);

lib/dynamic_debug.c

548

pr_err("tokenize failed\n");

lib/dynamic_debug.c

553

pr_err("flags parse failed\n");

lib/dynamic_debug.c

557

pr_err("query parse failed\n");

lib/dynamic_debug.c

671

pr_err("%s unknown to %s\n", cl_str, KP_NAME(kp));

lib/dynamic_debug.c

700

pr_err("illegal map-type value %d\n", map->map_type);

lib/dynamic_debug.c

738

pr_err("expecting numeric input: %s > %s\n", instr, KP_NAME(kp));

lib/dynamic_debug.c

743

pr_err("%s: bad map type: %d\n", KP_NAME(kp), map->map_type);

lib/error-inject.c

78

pr_err("Failed to find error inject entry at %p\n",

lib/find_bit_benchmark.c

113

pr_err("find_last_bit: %18llu ns, %6ld iterations\n", time, cnt);

lib/find_bit_benchmark.c

129

pr_err("find_nth_bit: %18llu ns, %6ld iterations\n", time, w);

lib/find_bit_benchmark.c

144

pr_err("find_next_and_bit: %18llu ns, %6ld iterations\n", time, cnt);

lib/find_bit_benchmark.c

153

pr_err("\nStart testing find_bit() with random-filled bitmap\n");

lib/find_bit_benchmark.c

171

pr_err("\nStart testing find_bit() with sparse bitmap\n");

lib/find_bit_benchmark.c

47

pr_err("find_first_bit: %18llu ns, %6ld iterations\n", time, cnt);

lib/find_bit_benchmark.c

66

pr_err("find_first_and_bit: %18llu ns, %6ld iterations\n", time, cnt);

lib/find_bit_benchmark.c

80

pr_err("find_next_bit: %18llu ns, %6ld iterations\n", time, cnt);

lib/find_bit_benchmark.c

94

pr_err("find_next_zero_bit: %18llu ns, %6ld iterations\n", time, cnt);

lib/fw_table.c

195

pr_err("[%4.4s:0x%02x] Invalid zero length\n", id, proc->id);

lib/kobject.c

248

pr_err("%s failed for %s with -EEXIST, don't try to register things with the same name in the same directory.\n",

lib/kobject.c

251

pr_err("%s failed for %s (error: %d parent: %s)\n",

lib/kobject.c

347

pr_err("kobject (%p): tried to init an initialized object, something is seriously wrong.\n",

lib/kobject.c

357

pr_err("kobject (%p): %s\n", kobj, err_str);

lib/kobject.c

370

pr_err("can not set name properly!\n");

lib/kobject.c

420

pr_err("kobject '%s' (%p): tried to add an uninitialized object, something is seriously wrong.\n",

lib/kobject.c

865

pr_err("must have a ktype to be initialized properly!\n");

lib/kobject_uevent.c

785

pr_err("kobject_uevent: unable to create netlink socket!\n");

lib/kunit/attributes.c

105

pr_err("kunit executor: invalid filter operation: %s\n", op);

lib/kunit/attributes.c

130

pr_err("kunit executor: filter value not found: %s\n", input);

lib/kunit/attributes.c

141

pr_err("kunit executor: invalid filter input: %s\n", input);

lib/kunit/attributes.c

163

pr_err("kunit executor: invalid filter input: %s\n", input);

lib/kunit/attributes.c

167

pr_err("kunit executor: invalid filter input: %s\n", input);

lib/kunit/attributes.c

175

pr_err("kunit executor: invalid filter operation: %s\n", input);

lib/kunit/attributes.c

194

pr_err("kunit executor: filter value not found: %s\n", input);

lib/kunit/attributes.c

204

pr_err("kunit executor: invalid filter input: %s\n", input);

lib/kunit/attributes.c

358

pr_err("kunit executor: filter operation not found: %s\n", input);

lib/kunit/attributes.c

378

pr_err("kunit executor: attribute not found: %s\n", input);

lib/kunit/executor.c

399

pr_err("kunit executor: error filtering suites: %d\n", err);

lib/kunit/executor.c

411

pr_err("kunit executor: unknown action '%s'\n", action_param);

lib/kunit/test.c

855

pr_err("kunit: test interrupted\n");

lib/kunit/test.c

911

pr_err("kunit module: error filtering suites: %d\n", err);

lib/kunit/test.c

926

pr_err("kunit: unknown action '%s'\n", action);

lib/logic_pio.c

156

pr_err("PIO entry token 0x%lx invalid\n", pio);

lib/logic_pio.c

196

pr_err("IO range not found or invalid\n");

lib/logic_pio.c

200

pr_err("resource size %pa cannot fit in IO range size %pa\n",

lib/logic_pio.c

226

pr_err("addr %pa not registered in io_range_list\n", &addr);

lib/maple_tree.c

5070

pr_err("Error %lX > %lX " PTR_FMT "\n", mas->index, mas->last,

lib/maple_tree.c

6521

pr_err("index not increased! %lx <= %lx\n",

lib/maple_tree.c

6745

pr_err("node " PTR_FMT " last (%lx) > max (%lx) at pivot %d!\n",

lib/maple_tree.c

6749

pr_err("node " PTR_FMT " last (%lu) > max (%lu) at pivot %d!\n",

lib/maple_tree.c

6804

pr_err("node " PTR_FMT " last (%lx) > max (%lx) at pivot %d!\n",

lib/maple_tree.c

6808

pr_err("node " PTR_FMT " last (%lu) > max (%lu) at pivot %d!\n",

lib/maple_tree.c

6909

pr_err(PTR_FMT "[%u] %lu >= %lu - %lu + 1 (%lu)\n",

lib/maple_tree.c

6929

pr_err("gap offset " PTR_FMT "[%u] is invalid\n", node, offset);

lib/maple_tree.c

6934

pr_err("gap " PTR_FMT "[%u] is not the largest gap %lu\n",

lib/maple_tree.c

6941

pr_err("gap " PTR_FMT "[%u] beyond node limit != 0\n",

lib/maple_tree.c

6955

pr_err("gap " PTR_FMT "[%u] != %lu\n", p_mn, p_slot, max_gap);

lib/maple_tree.c

6985

pr_err("parent " PTR_FMT "[%u] does not have " PTR_FMT "\n",

lib/maple_tree.c

6989

pr_err("Invalid child " PTR_FMT " at parent " PTR_FMT "[%u] p_slot %u\n",

lib/maple_tree.c

7011

pr_err("Non-leaf node lacks child at " PTR_FMT "[%u]\n",

lib/maple_tree.c

7017

pr_err("Slot error at " PTR_FMT "[%u]: child " PTR_FMT " has pslot %u\n",

lib/maple_tree.c

7024

pr_err("child " PTR_FMT " has parent " PTR_FMT " not " PTR_FMT "\n",

lib/maple_tree.c

7054

pr_err("Missing node limit pivot at " PTR_FMT "[%u]",

lib/maple_tree.c

7060

pr_err(PTR_FMT "[%u] piv %lu < prev_piv %lu\n",

lib/maple_tree.c

7066

pr_err(PTR_FMT "[%u] %lu < %lu\n", mas_mn(mas), i,

lib/maple_tree.c

7071

pr_err(PTR_FMT "[%u] %lu > %lu\n", mas_mn(mas), i,

lib/maple_tree.c

7081

pr_err("node" PTR_FMT ": data_end %u != the last slot offset %u\n",

lib/maple_tree.c

7090

pr_err(PTR_FMT "[%u] should not have entry " PTR_FMT "\n",

lib/maple_tree.c

7101

pr_err(PTR_FMT "[%u] should not have piv %lu\n",

lib/maple_tree.c

7126

pr_err("Sequential nulls end at " PTR_FMT "[%u]\n",

lib/maple_tree.c

7168

pr_err("Invalid size %u of " PTR_FMT "\n",

lib/maple_tree.c

7185

pr_err("MAS: tree=" PTR_FMT " enode=" PTR_FMT " ",

lib/maple_tree.c

7189

pr_err("(ma_active)");

lib/maple_tree.c

7192

pr_err("(ma_none)");

lib/maple_tree.c

7195

pr_err("(ma_root)");

lib/maple_tree.c

7198

pr_err("(ma_start) ");

lib/maple_tree.c

7201

pr_err("(ma_pause) ");

lib/maple_tree.c

7204

pr_err("(ma_overflow) ");

lib/maple_tree.c

7207

pr_err("(ma_underflow) ");

lib/maple_tree.c

7210

pr_err("(ma_error) ");

lib/maple_tree.c

7214

pr_err("Store Type: ");

lib/maple_tree.c

7217

pr_err("invalid store type\n");

lib/maple_tree.c

7220

pr_err("new_root\n");

lib/maple_tree.c

7223

pr_err("store_root\n");

lib/maple_tree.c

7226

pr_err("exact_fit\n");

lib/maple_tree.c

7229

pr_err("split_store\n");

lib/maple_tree.c

7232

pr_err("slot_store\n");

lib/maple_tree.c

7235

pr_err("append\n");

lib/maple_tree.c

7238

pr_err("node_store\n");

lib/maple_tree.c

7241

pr_err("spanning_store\n");

lib/maple_tree.c

7244

pr_err("rebalance\n");

lib/maple_tree.c

7248

pr_err("[%u/%u] index=%lx last=%lx\n", mas->offset, mas->end,

lib/maple_tree.c

7250

pr_err(" min=%lx max=%lx sheaf=" PTR_FMT ", request %lu depth=%u, flags=%x\n",

lib/maple_tree.c

7254

pr_err("Check index & last\n");

lib/maple_tree.c

7260

pr_err("WR_MAS: node=" PTR_FMT " r_min=%lx r_max=%lx\n",

lib/maple_tree.c

7262

pr_err(" type=%u off_end=%u, node_end=%u, end_piv=%lx\n",

lib/math/test_div64.c

246

pr_err("ERROR: %016llx / %08x => %016llx,%08x\n", \

lib/math/test_div64.c

248

pr_err("ERROR: expected value => %016llx,%08x\n",\

lib/math/test_mul_u64_u64_div_u64.c

118

pr_err("ERROR: 0x%016llx * 0x%016llx / 0x%016llx\n", a, b, d);

lib/math/test_mul_u64_u64_div_u64.c

119

pr_err("ERROR: expected result: %016llx\n", expected_result);

lib/math/test_mul_u64_u64_div_u64.c

120

pr_err("ERROR: obtained result: %016llx\n", result);

lib/math/test_mul_u64_u64_div_u64.c

125

pr_err("ERROR: 0x%016llx * 0x%016llx +/ 0x%016llx\n", a, b, d);

lib/math/test_mul_u64_u64_div_u64.c

126

pr_err("ERROR: expected result: %016llx\n", expected_result);

lib/math/test_mul_u64_u64_div_u64.c

127

pr_err("ERROR: obtained result: %016llx\n", result_up);

lib/percpu-refcount.c

201

pr_err("%s(): percpu_ref underflow", __func__);

lib/raid6/algos.c

150

pr_err("raid6: Yikes! No recovery algorithm found!\n");

lib/raid6/algos.c

197

pr_err("raid6: Yikes! No algorithm found!\n");

lib/raid6/algos.c

255

pr_err("raid6: Yikes! No memory available.\n");

lib/ref_tracker.c

312

pr_err("reference already released.\n");

lib/ref_tracker.c

314

pr_err("allocated in:\n");

lib/ref_tracker.c

318

pr_err("freed in:\n");

lib/scatterlist.c

1433

pr_err("%s(%u) unsupported\n", __func__, iov_iter_type(iter));

lib/stackdepot.c

115

pr_err("stack_depot_max_pools below 1024, using default of %u\n",

lib/stackdepot.c

121

pr_err("stack_depot_max_pools exceeds %lld, using default of %u\n",

lib/stackdepot.c

200

pr_err("hash table allocation failed, disabling\n");

lib/stackdepot.c

218

pr_err("stack pools allocation failed, disabling\n");

lib/stackdepot.c

265

pr_err("hash table allocation failed, disabling\n");

lib/stackdepot.c

277

pr_err("stack pools allocation failed, disabling\n");

lib/stmp_device.c

74

pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);

lib/test_bitmap.c

142

pr_err("[%s:%u] expected %s, got %s\n", srcfile, line, exp_str, str);

lib/test_bitmap.c

507

pr_err("parselist: %d: input is %s, errno is %d, expected %d\n",

lib/test_bitmap.c

515

pr_err("parselist: %d: input is %s, result is 0x%lx, expected 0x%lx\n",

lib/test_bitmap.c

551

pr_err("bitmap_print_to_pagebuf: result is %d, expected %d\n", ret, slen);

lib/test_bitmap.c

557

pr_err("bitmap_print_to_pagebuf: result is %s, expected %s\n", buf, expected);

lib/test_bitmap.c

624

pr_err("parse: %d: input is %s, errno is %d, expected %d\n",

lib/test_bitmap.c

632

pr_err("parse: %d: input is %s, result is 0x%lx, expected 0x%lx\n",

lib/test_bitmap.c

661

pr_err("bitmap_copy_arr32(nbits == %d:"

lib/test_bitmap.c

67

pr_err("[%s:%u] expected %lu, got %lu\n",

lib/test_bitmap.c

689

pr_err("bitmap_copy_arr64(nbits == %d:"

lib/test_bitmap.c

696

pr_err("bitmap_to_arr64(nbits == %d): tail is not safely cleared: 0x%016llx (must be 0x%016llx)\n",

lib/test_bitops.c

121

pr_err("ERROR: FOUND SET BIT %d\n", bit_set);

lib/test_bitops.c

74

pr_err("fns: %18llu ns\n", time);

lib/test_bpf.c

15673

pr_err("test_bpf: invalid test_id specified for '%s' suite.\n",

lib/test_bpf.c

15688

pr_err("test_bpf: no test named '%s' found for '%s' suite.\n",

lib/test_bpf.c

15699

pr_err("test_bpf: test_range is out of bound for '%s' suite.\n",

lib/test_bpf.c

15705

pr_err("test_bpf: test_range is ending before it starts.\n");

lib/test_bpf.c

15722

pr_err("test_bpf: invalid test_suite '%s' specified.\n", test_suite);

lib/test_firmware.c

1417

pr_err("#%u: failed to async load firmware\n", idx);

lib/test_firmware.c

1425

pr_err("Testing interface must use PAGE_SIZE firmware for now\n");

lib/test_firmware.c

1448

pr_err("Set config_upload_name before using upload_read\n");

lib/test_firmware.c

1460

pr_err("Firmware name not found: %s\n",

lib/test_firmware.c

1466

pr_err("Testing interface must use PAGE_SIZE firmware for now\n");

lib/test_firmware.c

1536

pr_err("could not init firmware test config: %d\n", rc);

lib/test_firmware.c

1544

pr_err("could not register misc device: %d\n", rc);

lib/test_firmware.c

263

pr_err("could not alloc settings for config trigger: %d\n",

lib/test_firmware.c

495

pr_err("Must call release_all_firmware prior to changing config\n");

lib/test_firmware.c

542

pr_err("Must call release_all_firmware prior to changing config\n");

lib/test_firmware.c

572

pr_err("Must call release_all_firmware prior to changing config\n");

lib/test_firmware.c

801

pr_err("failed to async load firmware\n");

lib/test_firmware.c

847

pr_err("failed to async load firmware\n");

lib/test_firmware.c

959

pr_err("Setting up thread %u failed\n", req->idx);

lib/test_hexdump.c

142

pr_err("Len: %zu row: %d group: %d\n", len, rowsize, groupsize);

lib/test_hexdump.c

143

pr_err("Result: '%s'\n", real);

lib/test_hexdump.c

144

pr_err("Expect: '%s'\n", test);

lib/test_hexdump.c

200

pr_err("Len: %zu buflen: %zu strlen: %zu\n",

lib/test_hexdump.c

202

pr_err("Result: %d '%s'\n", r, buf);

lib/test_hexdump.c

203

pr_err("Expect: %d '%s'\n", e, test);

lib/test_hexdump.c

243

pr_err("failed %u out of %u tests\n", failed_tests, total_tests);

lib/test_kho.c

325

pr_err("KHO restore failed\n");

lib/test_kmod.c

1090

pr_err("Cannot alloc kmod_config_init()\n");

lib/test_kmod.c

1100

pr_err("Cannot alloc misc_dev->name\n");

lib/test_kmod.c

1138

pr_err("reached limit of number of test devices\n");

lib/test_kmod.c

1148

pr_err("could not register misc device: %d\n", ret);

lib/test_kmod.c

1174

pr_err("Cannot add first test kmod device\n");

lib/test_lockup.c

423

pr_err("user space ptr invalid in kernel: %#lx\n", addr);

lib/test_lockup.c

429

pr_err("invalid kernel ptr: %#lx\n", addr);

lib/test_lockup.c

446

pr_err("invalid magic at %#lx + %#x = %#x, expected %#x\n",

lib/test_lockup.c

474

pr_err("unknown state=%s\n", state);

lib/test_lockup.c

524

pr_err("refuse to sleep in atomic context\n");

lib/test_lockup.c

529

pr_err("no mm to lock mmap_lock\n");

lib/test_lockup.c

536

pr_err("failed to open %s: %ld\n", test_file_path, PTR_ERR(test_file));

lib/test_lockup.c

543

pr_err("no file to lock\n");

lib/test_maple_tree.c

151

pr_err("Load %lu returned %p expect %p\n", index, ret, ptr);

lib/test_maple_tree.c

1993

pr_err("OOM!");

lib/test_maple_tree.c

2139

pr_err("OOM!");

lib/test_memcat_p.c

65

pr_err("test failed: wrong magic at %d: %u\n", i,

lib/test_memcat_p.c

72

pr_err("test failed: expected zero total, got %d\n", total);

lib/test_memcat_p.c

77

pr_err("test failed: expected output size %d, got %d\n",

lib/test_memcat_p.c

84

pr_err("test failed: wrong element order at %d\n", i);

lib/test_objagg.c

165

pr_err("Key %u: Failed to get object.\n", key_id);

lib/test_objagg.c

170

pr_err("Key %u: Root was not created\n", key_id);

lib/test_objagg.c

176

pr_err("Key %u: Root was incorrectly created\n",

lib/test_objagg.c

184

pr_err("Key %u: Root has unexpected key id\n", key_id);

lib/test_objagg.c

190

pr_err("Key %u: Buffer does not match the expected content\n",

lib/test_objagg.c

213

pr_err("Key %u: Root was not destroyed\n", key_id);

lib/test_objagg.c

218

pr_err("Key %u: Root was incorrectly destroyed\n",

lib/test_objagg.c

236

pr_err("Stats: Object count is not zero while it should be\n");

lib/test_objagg.c

255

pr_err("Stats: Unexpected object count (%u expected, %u returned)\n",

lib/test_objagg.c

263

pr_err("Stats: incorrect user count\n");

lib/test_objagg.c

268

pr_err("Stats: incorrect delta user count\n");

lib/test_objagg.c

57

pr_err("Key %u: Failed to get object.\n", key_id);

lib/test_objagg.c

571

pr_err("Key %u: Delta count changed while expected to remain the same.\n",

lib/test_objagg.c

580

pr_err("Key %u: Delta count was not incremented.\n",

lib/test_objagg.c

589

pr_err("Key %u: Delta count was not decremented.\n",

lib/test_objagg.c

599

pr_err("Key %u: Root count changed while expected to remain the same.\n",

lib/test_objagg.c

608

pr_err("Key %u: Root count was not incremented.\n",

lib/test_objagg.c

617

pr_err("Key %u: Root count was not decremented.\n",

lib/test_objagg.c

63

pr_err("Key %u: Got another object for the same key.\n",

lib/test_objagg.c

793

pr_err("Key %u: Stats: %s\n", action_item->key_id, errmsg);

lib/test_objagg.c

925

pr_err("Hints stats: %s\n", errmsg);

lib/test_objagg.c

946

pr_err("Stats2: %s\n", errmsg);

lib/test_objagg.c

988

pr_err("Stats: %s\n", errmsg);

lib/test_objpool.c

376

pr_err("failed to create thread for cpu %d\n", cpu);

lib/test_objpool.c

562

pr_err("failed to create thread for cpu %d\n", cpu);

lib/test_parman.c

309

pr_err("Array limit is lower than the base count (%lu < %lu)\n",

lib/test_parman.c

322

pr_err("Gap found in array even though they are forbidden\n");

lib/test_parman.c

330

pr_err("Item belongs under higher priority then the last one (current: %lu, previous: %lu)\n",

lib/test_parman.c

337

pr_err("Item has different index in compare to where it actually is (%lu != %d)\n",

lib/test_parman.c

344

pr_err("Number of used items in array does not match (%u != %u)\n",

lib/test_parman.c

350

pr_err("Number of unused item at the end of array is bigger than resize step (%u >= %lu)\n",

lib/test_rhashtable.c

601

pr_err(" found unexpected object %d-%d\n", key.tid, key.id);

lib/test_rhashtable.c

604

pr_err(" object %d-%d not found!\n", key.tid, key.id);

lib/test_rhashtable.c

607

pr_err(" wrong object returned (got %d-%d, expected %d-%d)\n",

lib/test_rhashtable.c

625

pr_err(" thread[%d]: interrupted\n", tdata->id);

lib/test_rhashtable.c

636

pr_err(" thread[%d]: rhashtable_insert_fast failed\n",

lib/test_rhashtable.c

647

pr_err(" thread[%d]: rhashtable_lookup_test failed\n",

lib/test_rhashtable.c

659

pr_err(" thread[%d]: rhashtable_remove_fast failed\n",

lib/test_rhashtable.c

669

pr_err(" thread[%d]: rhashtable_lookup_test (2) failed\n",

lib/test_rhashtable.c

773

pr_err(" kthread_run failed for thread %d\n", i);

lib/test_rhashtable.c

780

pr_err(" wait_event interruptible failed\n");

lib/test_vmalloc.c

583

pr_err("Failed to start %d kthread\n", i);

lib/tests/liveupdate.c

105

pr_err("liveupdate_flb_get_incoming for %s failed: %pe\n",

lib/tests/liveupdate.c

123

pr_err("Failed to register %s %pe\n",

lib/tests/liveupdate.c

130

pr_err("Failed: %s should be already registered, but got err: %pe\n",

lib/tests/liveupdate.c

147

pr_err("Failed to unregister %s %pe\n",

lib/tests/liveupdate.c

58

pr_err("%s: ERROR - incorrect data handle: %llx, expected %llx\n",

lib/tests/liveupdate.c

74

pr_err("%s: ERROR - finish called with invalid object\n",

lib/ubsan.c

225

pr_err("UBSAN: %s in %s:%d:%d\n", reason, loc->file_name,

lib/ubsan.c

258

pr_err("%s %c %s cannot be represented in type %s\n",

lib/ubsan.c

301

pr_err("negation of %s cannot be represented in type %s:\n",

lib/ubsan.c

322

pr_err("cannot represent %s value %s during %s %s, truncated to %s\n",

lib/ubsan.c

346

pr_err("division of %s by -1 cannot be represented in type %s\n",

lib/ubsan.c

349

pr_err("division by zero\n");

lib/ubsan.c

362

pr_err("%s null pointer of type %s\n",

lib/ubsan.c

377

pr_err("%s misaligned address %p for type %s\n",

lib/ubsan.c

380

pr_err("which requires %ld byte alignment\n", data->alignment);

lib/ubsan.c

392

pr_err("%s address %p with insufficient space\n",

lib/ubsan.c

395

pr_err("for an object of type %s\n", data->type->type_name);

lib/ubsan.c

453

pr_err("index %s is out of range for type %s\n", index_str,

lib/ubsan.c

477

pr_err("shift exponent %s is negative\n", rhs_str);

lib/ubsan.c

481

pr_err("shift exponent %s is too large for %u-bit type %s\n",

lib/ubsan.c

486

pr_err("left shift of negative value %s\n",

lib/ubsan.c

489

pr_err("left shift of %s by %s places cannot be"

lib/ubsan.c

505

pr_err("calling __builtin_unreachable()\n");

lib/ubsan.c

524

pr_err("load of value %s is not a valid value for type %s\n",

lib/ubsan.c

546

pr_err("assumption of %lu byte alignment (with offset of %lu byte) for pointer of type %s failed",

lib/ubsan.c

549

pr_err("assumption of %lu byte alignment for pointer of type %s failed",

lib/ubsan.c

553

pr_err("%saddress is %lu aligned, misalignment offset is %lu bytes",

mm/cma.c

199

pr_err("CMA area %s could not be activated\n", cma->name);

mm/cma.c

225

pr_err("Not enough slots for CMA reserved regions!\n");

mm/cma.c

284

pr_err("pageblock_order not yet initialized. Called during early boot?\n");

mm/cma.c

367

pr_err("Region at %pa defined on low/high memory boundary (%pa)\n",

mm/cma.c

444

pr_err("Not enough slots for CMA reserved regions!\n");

mm/cma.c

460

pr_err("Region at %pa must be aligned to %pa bytes\n",

mm/cma.c

485

pr_err("Size (%pa) of region at %pa exceeds limit (%pa)\n",

mm/cma.c

705

pr_err("Failed to reserve %lu MiB\n",

mm/cma.c

744

pr_err("Failed to reserve %ld MiB\n",

mm/compaction.c

3246

pr_err("Failed to start kcompactd on node %d\n", nid);

mm/damon/core.c

3023

pr_err("creating damon_region_cache fails\n");

mm/damon/vaddr.c

269

pr_err("%d'th init region creation failed\n", i);

mm/debug.c

334

pr_err("vm_debug option '%c' unknown. skipped\n",

mm/debug_page_alloc.c

26

pr_err("Bad debug_guardpage_minorder value: %s\n", buf);

mm/debug_vm_pgtable.c

1173

pr_err("Failed to allocate mm struct\n");

mm/debug_vm_pgtable.c

1180

pr_err("Failed to allocate vma\n");

mm/debug_vm_pgtable.c

1193

pr_err("Failed to allocate p4d entries\n");

mm/debug_vm_pgtable.c

1202

pr_err("Failed to allocate pud entries\n");

mm/debug_vm_pgtable.c

1211

pr_err("Failed to allocate pmd entries\n");

mm/debug_vm_pgtable.c

1219

pr_err("Failed to allocate pte entries\n");

mm/huge_memory.c

1028

pr_err("invalid size %s in thp_anon boot parameter\n", start_size);

mm/huge_memory.c

1033

pr_err("invalid size %s in thp_anon boot parameter\n", end_size);

mm/huge_memory.c

1058

pr_err("invalid policy %s in thp_anon boot parameter\n", policy);

mm/huge_memory.c

795

pr_err("failed to create transparent hugepage kobject\n");

mm/huge_memory.c

801

pr_err("failed to register transparent hugepage group\n");

mm/huge_memory.c

807

pr_err("failed to register transparent hugepage group\n");

mm/huge_memory.c

816

pr_err("failed to create thpsize for order %d\n", order);

mm/hugetlb.c

4398

pr_err("HugeTLB: unsupported hugepagesz=%s\n", s);

mm/hugetlb.c

4450

pr_err("HugeTLB: default_hugepagesz previously specified, ignoring %s\n", s);

mm/hugetlb.c

4457

pr_err("HugeTLB: unsupported default_hugepagesz=%s\n", s);

mm/hugetlb_sysfs.c

448

pr_err("HugeTLB: Unable to add hstate %s for node %d\n",

mm/hugetlb_sysfs.c

495

pr_err("HugeTLB: Unable to add hstate %s\n", h->name);

mm/kasan/kasan_test_c.c

65

pr_err("Can't run KASAN tests with KASAN disabled");

mm/kasan/quarantine.c

411

pr_err("cpu quarantine register failed [%d]\n", ret);

mm/kasan/report.c

216

pr_err("==================================================================\n");

mm/kasan/report.c

224

pr_err("==================================================================\n");

mm/kasan/report.c

247

pr_err("BUG: KASAN: %s in %pS\n", info->bug_type, (void *)info->ip);

mm/kasan/report.c

250

pr_err("Free of addr %px by task %s/%d\n",

mm/kasan/report.c

256

pr_err("%s of size %zu at addr %px by task %s/%d\n",

mm/kasan/report.c

260

pr_err("%s at addr %px by task %s/%d\n",

mm/kasan/report.c

274

pr_err("%s by task %u on cpu %d at %lu.%06lus:\n",

mm/kasan/report.c

278

pr_err("%s by task %u:\n", prefix, track->pid);

mm/kasan/report.c

283

pr_err("(stack is not available)\n");

mm/kasan/report.c

300

pr_err("The buggy address belongs to the object at %px\n"

mm/kasan/report.c

329

pr_err("The buggy address is located %d bytes %s of\n"

mm/kasan/report.c

339

pr_err("\n");

mm/kasan/report.c

344

pr_err("\n");

mm/kasan/report.c

379

pr_err("\n");

mm/kasan/report.c

383

pr_err("\n");

mm/kasan/report.c

387

pr_err("The buggy address belongs to the variable:\n");

mm/kasan/report.c

388

pr_err(" %pS\n", addr);

mm/kasan/report.c

389

pr_err("\n");

mm/kasan/report.c

398

pr_err("\n");

mm/kasan/report.c

402

pr_err("The buggy address belongs to a");

mm/kasan/report.c

409

pr_err("The buggy address belongs to the physical page:\n");

mm/kasan/report.c

411

pr_err("\n");

mm/kasan/report.c

444

pr_err("Memory state around the buggy address:\n");

mm/kasan/report.c

465

pr_err("%*c\n", meta_pointer_offset(row, addr), '^');

mm/kasan/report.c

479

pr_err("\n");

mm/kasan/report.c

619

pr_err("BUG: KASAN: invalid-access\n");

mm/kasan/report.c

620

pr_err("Asynchronous fault: no details available\n");

mm/kasan/report.c

621

pr_err("\n");

mm/kasan/report_generic.c

198

pr_err("Last potentially related work creation:\n");

mm/kasan/report_generic.c

200

pr_err("\n");

mm/kasan/report_generic.c

203

pr_err("Second to last potentially related work creation:\n");

mm/kasan/report_generic.c

205

pr_err("\n");

mm/kasan/report_generic.c

223

pr_err("internal error: frame description too long: %s\n",

mm/kasan/report_generic.c

236

pr_err("internal error: not a valid number: %s\n", token);

mm/kasan/report_generic.c

260

pr_err("\n");

mm/kasan/report_generic.c

261

pr_err("This frame has %lu %s:\n", num_objects,

mm/kasan/report_generic.c

288

pr_err(" [%lu, %lu) '%s'", offset, offset + size, token);

mm/kasan/report_generic.c

326

pr_err("internal error: frame has invalid marker: %lu\n",

mm/kasan/report_generic.c

347

pr_err("The buggy address belongs to stack of task %s/%d\n",

mm/kasan/report_generic.c

354

pr_err(" and is located at offset %lu in frame:\n", offset);

mm/kasan/report_generic.c

355

pr_err(" %pS\n", frame_pc);

mm/kasan/report_hw_tags.c

69

pr_err("Pointer tag: [%02x], memory tag: [%02x]\n",

mm/kasan/report_sw_tags.c

83

pr_err("Pointer tag: [%02x], memory tag: [%02x]\n", addr_tag, *shadow);

mm/kasan/report_sw_tags.c

92

pr_err("The buggy address belongs to stack of task %s/%d\n",

mm/kfence/core.c

1044

pr_err("%s failed\n", __func__);

mm/kfence/core.c

942

pr_err("failed to allocate pool\n");

mm/kfence/core.c

949

pr_err("failed to allocate metadata\n");

mm/kfence/core.c

989

pr_err("%s failed\n", __func__);

mm/kfence/report.c

222

pr_err("==================================================================\n");

mm/kfence/report.c

228

pr_err("BUG: KFENCE: out-of-bounds %s in %pS\n\n", get_access_type(is_write),

mm/kfence/report.c

230

pr_err("Out-of-bounds %s at 0x%p (%luB %s of kfence-#%td):\n",

mm/kfence/report.c

237

pr_err("BUG: KFENCE: use-after-free %s in %pS\n\n", get_access_type(is_write),

mm/kfence/report.c

239

pr_err("Use-after-free %s at 0x%p (in kfence-#%td):\n",

mm/kfence/report.c

243

pr_err("BUG: KFENCE: memory corruption in %pS\n\n", (void *)stack_entries[skipnr]);

mm/kfence/report.c

244

pr_err("Corrupted memory at 0x%p ", (void *)address);

mm/kfence/report.c

249

pr_err("BUG: KFENCE: invalid %s in %pS\n\n", get_access_type(is_write),

mm/kfence/report.c

251

pr_err("Invalid %s at 0x%p:\n", get_access_type(is_write),

mm/kfence/report.c

255

pr_err("BUG: KFENCE: invalid free in %pS\n\n", (void *)stack_entries[skipnr]);

mm/kfence/report.c

256

pr_err("Invalid free of 0x%p (in kfence-#%td):\n", (void *)address,

mm/kfence/report.c

266

pr_err("\n");

mm/kfence/report.c

271

pr_err("\n");

mm/kfence/report.c

277

pr_err("==================================================================\n");

mm/khugepaged.c

2694

pr_err("khugepaged: kthread_run(khugepaged) failed\n");

mm/kmsan/core.c

207

pr_err("%s: not memsetting %ld bytes starting at %px, because the shadow is NULL\n",

mm/kmsan/core.c

371

pr_err("%s: attempting to access two shadow page ranges.\n", __func__);

mm/kmsan/core.c

372

pr_err("Access of size %ld at %px.\n", size, addr);

mm/kmsan/core.c

373

pr_err("Addresses belonging to different ranges: %px and %px\n",

mm/kmsan/core.c

375

pr_err("page[0].shadow: %px, page[1].shadow: %px\n", cur_shadow,

mm/kmsan/core.c

377

pr_err("page[0].origin: %px, page[1].origin: %px\n", cur_origin,

mm/kmsan/core.c

381

pr_err("Origin: %08x\n", *origin_p);

mm/kmsan/core.c

384

pr_err("Origin: unavailable\n");

mm/kmsan/report.c

107

pr_err("Local variable %s created at:\n",

mm/kmsan/report.c

110

pr_err(" %pSb\n", pc1);

mm/kmsan/report.c

112

pr_err(" %pSb\n", pc2);

mm/kmsan/report.c

121

pr_err("<Zero or more stacks not recorded to save memory>\n\n");

mm/kmsan/report.c

124

pr_err("Uninit was stored to memory at:\n");

mm/kmsan/report.c

135

pr_err("\n");

mm/kmsan/report.c

138

pr_err("Uninit was created at:\n");

mm/kmsan/report.c

144

pr_err("(stack is not available)\n");

mm/kmsan/report.c

170

pr_err("=====================================================\n");

mm/kmsan/report.c

190

pr_err("BUG: KMSAN: %s in %pSb\n", bug_type,

mm/kmsan/report.c

194

pr_err("\n");

mm/kmsan/report.c

199

pr_err("\n");

mm/kmsan/report.c

201

pr_err("Byte %d of %d is uninitialized\n", off_first,

mm/kmsan/report.c

204

pr_err("Bytes %d-%d of %d are uninitialized\n",

mm/kmsan/report.c

208

pr_err("Memory access of size %d starts at %px\n", size,

mm/kmsan/report.c

211

pr_err("Data copied to user address %px\n", user_addr);

mm/kmsan/report.c

212

pr_err("\n");

mm/kmsan/report.c

214

pr_err("=====================================================\n");

mm/ksm.c

3991

pr_err("ksm: creating kthread failed\n");

mm/ksm.c

3999

pr_err("ksm: register sysfs failed\n");

mm/memblock.c

2530

pr_err("failed to prepare memblock FDT for KHO: %d\n", err);

mm/memblock.c

487

pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n",

mm/memblock.c

785

pr_err("NUMA: no nodes coverage for %luMB of %luMB RAM\n",

mm/memfd_luo.c

135

pr_err("failed to pin folios: %d\n", err);

mm/memfd_luo.c

413

pr_err("Unable to restore folio at physical address: %llx\n",

mm/memfd_luo.c

426

pr_err("shmem: failed to charge folio index %ld: %d\n",

mm/memfd_luo.c

434

pr_err("shmem: failed to add to page cache folio index %ld: %d\n",

mm/memfd_luo.c

446

pr_err("shmem: failed to account folio index %ld: %d\n",

mm/memfd_luo.c

491

pr_err("failed to setup file: %pe\n", file);

mm/memfd_luo.c

552

pr_err("Could not register luo filesystem handler: %pe\n",

mm/memory-failure.c

1012

pr_err("%#lx: Unknown page state\n", page_to_pfn(p));

mm/memory-failure.c

1298

pr_err("%#lx: recovery action for %s: %s\n",

mm/memory-failure.c

1448

pr_err("%#lx: unhandlable page.\n", page_to_pfn(p));

mm/memory-failure.c

1530

pr_err("%#lx: keeping poisoned page in swap cache\n", pfn);

mm/memory-failure.c

1614

pr_err("%#lx: failed to unmap page (folio mapcount=%d)\n",

mm/memory-failure.c

2383

pr_err("%#lx: memory outside kernel control\n", pfn);

mm/memory-failure.c

2613

pr_err("buffer overflow when queuing memory failure at %#lx\n",

mm/memory-failure.c

292

pr_err("%#lx: Sending SIGBUS to %s:%d due to hardware memory corruption\n",

mm/memory-failure.c

392

pr_err("Out of memory while machine check handling\n");

mm/memory-failure.c

470

pr_err("%#lx: forcibly killing %s:%d because of failure to unmap corrupted page\n",

mm/memory-failure.c

483

pr_err("%#lx: Cannot send advisory machine check signal to %s:%d\n",

mm/memory-failure.c

987

pr_err("%#lx: %s still referenced by %d users\n",

mm/memory-tiers.c

993

pr_err("failed to create numa kobject\n");

mm/memory-tiers.c

998

pr_err("failed to register numa group\n");

mm/memory_hotplug.c

1305

pr_err("Cannot online node %d due to NULL pgdat\n", nid);

mm/memory_hotplug.c

1337

pr_err("Block size [%#lx] unaligned hotplug range: start %#llx, size %#llx",

mm/memory_hotplug.c

2417

pr_err("%s: Failed to remove memory: %d", __func__, rc);

mm/mempolicy.c

3383

pr_err("%s: interleaving failed\n", __func__);

mm/mempolicy.c

3817

pr_err("invalid node id: %d\n", nid);

mm/mempolicy.c

3871

pr_err("failed to add sysfs for node%d during hotplug: %d\n",

mm/mempolicy.c

3906

pr_err("failed to add sysfs for node%d during init: %d\n",

mm/mempool.c

49

pr_err("BUG: mempool element poison mismatch\n");

mm/mempool.c

50

pr_err("Mempool %p size %zu\n", pool, size);

mm/mempool.c

51

pr_err(" nr=%d @ %p: %s0x", nr, element, start > 0 ? "... " : "");

mm/mmap.c

1682

pr_err("Failed registering memory add/remove notifier for admin reserve\n");

mm/nommu.c

1003

pr_err("Allocation of length %lu from process %d (%s) failed\n",

mm/numa_emulation.c

120

pr_err("Not enough memory for each node. "

mm/numa_emulation.c

266

pr_err("Fake node size %LuMB too small, increasing to %LuMB\n",

mm/numa_emulation.c

57

pr_err("NUMA: Too many emulated memblks, failing emulation\n");

mm/numa_memblks.c

150

pr_err("too many memblk ranges\n");

mm/numa_memblks.c

284

pr_err("node %d [mem %#010Lx-%#010Lx] overlaps with node %d [mem %#010Lx-%#010Lx]\n",

mm/oom_kill.c

961

pr_err("%s: Killed process %d (%s) total-vm:%lukB, anon-rss:%lukB, file-rss:%lukB, shmem-rss:%lukB, UID:%u pgtables:%lukB oom_score_adj:%d\n",

mm/page_alloc.c

619

pr_err("page 0x%lx outside node %d zone %s [ 0x%lx - 0x%lx ]\n",

mm/page_ext.c

309

pr_err("page ext allocation failure\n");

mm/page_idle.c

220

pr_err("page_idle: register sysfs failed\n");

mm/page_io.c

169

pr_err("swapon: swapfile has holes\n");

mm/page_poison.c

66

pr_err("pagealloc: single bit error\n");

mm/page_poison.c

68

pr_err("pagealloc: memory corruption\n");

mm/rodata_test.c

25

pr_err("test 1 fails (start data)\n");

mm/rodata_test.c

32

pr_err("test data was not read only\n");

mm/rodata_test.c

38

pr_err("test data was changed\n");

mm/rodata_test.c

44

pr_err("start of .rodata is not page size aligned\n");

mm/rodata_test.c

48

pr_err("end of .rodata is not page size aligned\n");

mm/shmem.c

5043

pr_err("tmpfs: strict_encoding option without encoding is forbidden\n");

mm/shmem.c

5434

pr_err("Could not register tmpfs\n");

mm/shmem.c

5441

pr_err("Could not kern_mount tmpfs\n");

mm/shmem.c

5448

pr_err("Could not init tmpfs sysfs\n");

mm/shmem.c

5688

pr_err("invalid size %s in thp_shmem boot parameter\n",

mm/shmem.c

5694

pr_err("invalid size %s in thp_shmem boot parameter\n",

mm/shmem.c

5729

pr_err("invalid policy %s in thp_shmem boot parameter\n", policy);

mm/slab_common.c

106

pr_err("kmem_cache_create(%s) integrity check failed\n", name);

mm/slab_common.c

2209

pr_err("Failed to allocate kfree_rcu() shrinker!\n");

mm/slab_common.c

275

pr_err("SLUB: Unable to add cache alias %s to sysfs\n",

mm/slub.c

1086

pr_err("%s in %pS age=%lu cpu=%u pid=%d\n",

mm/slub.c

1093

pr_err("object allocation/free stack trace missing\n");

mm/slub.c

1109

pr_err("Slab 0x%p objects=%u used=%u fp=0x%p flags=%pGp\n",

mm/slub.c

1127

pr_err("=============================================================================\n");

mm/slub.c

1128

pr_err("BUG %s (%s): %pV\n", s ? s->name : "<unknown>", print_tainted(), &vaf);

mm/slub.c

1129

pr_err("-----------------------------------------------------------------------------\n\n");

mm/slub.c

1154

pr_err("FIX %s: %pV\n", s->name, &vaf);

mm/slub.c

1167

pr_err("Object 0x%p @offset=%tu fp=0x%p\n\n",

mm/slub.c

1210

pr_err("Invalid pointer 0x%p\n", object);

mm/slub.c

1314

pr_err("[%s overwritten] 0x%p-0x%p @offset=%tu. First byte 0x%x instead of 0x%x\n",

mm/slub.c

1840

pr_err("slab_debug option '%c' unknown. skipped\n", *str);

mm/slub.c

3318

pr_err("SLUB: Unable to initialize free list for %s\n",

mm/slub.c

7525

pr_err("SLUB: Unable to allocate memory from node %d\n", node);

mm/slub.c

7526

pr_err("SLUB: Allocating a useless per node structure in order to be able to continue\n");

mm/slub.c

7834

pr_err("Object 0x%p @offset=%tu\n", p, p - addr);

mm/slub.c

8517

pr_err("SLUB: Unable to add cache %s to sysfs\n", s->name);

mm/slub.c

8580

pr_err("SLUB %s: %ld partial slabs counted but counter=%ld\n",

mm/slub.c

8593

pr_err("SLUB: %s %ld slabs counted but counter=%ld\n",

mm/slub.c

9576

pr_err("Cannot register slab subsystem.\n");

mm/slub.c

9585

pr_err("SLUB: Unable to add boot slab %s to sysfs\n",

mm/slub.c

9595

pr_err("SLUB: Unable to add boot slab alias %s to sysfs\n",

mm/sparse.c

541

pr_err("%s: node[%d] usemap allocation failed", __func__, nid);

mm/sparse.c

560

pr_err("%s: node[%d] memory map backing failed. Some memory will not be available.",

mm/swap_state.c

965

pr_err("failed to create swap kobject\n");

mm/swap_state.c

970

pr_err("failed to register swap group\n");

mm/swapfile.c

1679

pr_err("%s: %s%08lx\n", __func__, Bad_file, entry.val);

mm/swapfile.c

1683

pr_err("%s: %s%08lx\n", __func__, Bad_offset, entry.val);

mm/swapfile.c

3172

pr_err("Unable to find swap-space signature\n");

mm/swapfile.c

3424

pr_err("swap:%u != (max:%u - 1)\n", si->pages, si->max);

mm/swapfile.c

3503

pr_err("swapon: discard_swap(%p): %d\n",

mm/swapfile.c

3655

pr_err("%s%08lx\n", Bad_file, entry.val);

mm/vmalloc.c

5376

pr_err("Failed to allocate an array. Disable a node layer\n");

mm/vmalloc.c

5478

pr_err("Failed to allocate vmap-node shrinker!\n");

mm/vmscan.c

5742

pr_err("lru_gen: failed to create sysfs group\n");

mm/vmscan.c

7483

pr_err("Failed to start kswapd on node %d, ret=%pe\n",

mm/vmstat.c

2276

pr_err("vmstat: failed to register 'dead' hotplug state\n");

mm/vmstat.c

2282

pr_err("vmstat: failed to register 'online' hotplug state\n");

mm/zsmalloc.c

2192

pr_err("Class-%d fullness group %d is not empty\n",

mm/zswap.c

1676

pr_err("alloc failed, zswap disabled for swap type %d\n", type);

mm/zswap.c

1785

pr_err("entry cache creation failed\n");

mm/zswap.c

1817

pr_err("pool creation failed\n");

mm/zswap.c

268

pr_err("percpu alloc failed\n");

mm/zswap.c

308

pr_err("compressor %s not available, using default %s\n",

mm/zswap.c

500

pr_err("can't set param, initialization failed\n");

mm/zswap.c

509

pr_err("compressor %s not available\n", s);

mm/zswap.c

588

pr_err("can't enable, no pool configured\n");

mm/zswap.c

593

pr_err("can't enable, initialization failed\n");

mm/zswap.c

752

pr_err("could not alloc crypto acomp %s : %pe\n",

mm/zswap.c

760

pr_err("could not alloc crypto acomp_request %s\n",

net/8021q/vlanproc.c

127

pr_err("can't create entry in proc filesystem!\n");

net/9p/client.c

1473

pr_err("bogus RREAD count (%u > %u)\n", received, rsize);

net/9p/client.c

1542

pr_err("bogus RWRITE count (%u > %u)\n", written, rsize);

net/9p/client.c

1597

pr_err("bogus RWRITE count (%d > %u)\n", written, len);

net/9p/client.c

2029

pr_err("bogus RREADDIR count (%u > %u)\n", count, rsize);

net/9p/client.c

407

pr_err("requested packet size too big: %d does not fit %zu (type=%d)\n",

net/9p/error.c

220

pr_err("%s: server reported unknown error %s\n",

net/9p/trans_fd.c

776

pr_err("%s (%d): failed to map fd\n",

net/9p/trans_fd.c

902

pr_err("%s (%d): problem creating socket\n",

net/9p/trans_fd.c

910

pr_err("%s (%d): problem binding to privport\n",

net/9p/trans_fd.c

921

pr_err("%s (%d): problem connecting socket to %s\n",

net/9p/trans_fd.c

944

pr_err("%s (%d): address too long: %s\n",

net/9p/trans_fd.c

954

pr_err("%s (%d): problem creating socket\n",

net/9p/trans_fd.c

962

pr_err("%s (%d): problem connecting socket: %s: %d\n",

net/9p/trans_fd.c

982

pr_err("Insufficient options for proto=fd\n");

net/9p/trans_rdma.c

207

pr_err("Duplicate reply for request %d", tag);

net/9p/trans_rdma.c

556

pr_err("%s (%d): problem binding to privport: %d\n",

net/9p/trans_usbg.c

406

pr_err("no channels available for device %s\n", devname);

net/9p/trans_virtio.c

606

pr_err("Failed to allocate virtio 9P channel\n");

net/9p/trans_virtio.c

716

pr_err("no channels available for device %s\n", devname);

net/atm/br2684.c

554

pr_err("tried to attach to non-existent device\n");

net/atm/br2684.c

698

pr_err("register_netdev failed\n");

net/atm/clip.c

104

pr_err("!clip_vcc->entry (clip_vcc %p)\n", clip_vcc);

net/atm/clip.c

124

pr_err("neigh_update failed with %d\n", error);

net/atm/clip.c

127

pr_err("ATMARP: failed (entry %p, vcc 0x%p)\n", entry, clip_vcc);

net/atm/clip.c

354

pr_err("skb_dst(skb) == NULL\n");

net/atm/clip.c

366

pr_err("NO NEIGHBOUR !\n");

net/atm/clip.c

472

pr_err("hiding hidden ATMARP entry\n");

net/atm/clip.c

916

pr_err("Unable to initialize /proc/net/atm/arp\n");

net/atm/common.c

859

pr_err("atmpvc_init() failed with %d\n", error);

net/atm/common.c

864

pr_err("atmsvc_init() failed with %d\n", error);

net/atm/common.c

869

pr_err("atm_proc_init() failed with %d\n", error);

net/atm/common.c

874

pr_err("atm_sysfs_init() failed with %d\n", error);

net/atm/lec.c

1066

pr_err("Unable to initialize /proc/net/atm/lec\n");

net/atm/mpoa_proc.c

293

pr_err("Unable to initialize /proc/atm/%s\n", STAT_FILE_NAME);

net/atm/resources.c

114

pr_err("atm_proc_dev_register failed for dev %s\n", type);

net/atm/resources.c

121

pr_err("atm_register_sysfs failed for dev %s\n", type);

net/atm/resources.c

84

pr_err("no space for dev %s\n", type);

net/atm/signaling.c

257

pr_err("closing with requests pending\n");

net/batman-adv/bat_algo.c

130

pr_err("Routing algorithm '%s' is not supported\n", algo_name);

net/batman-adv/bat_iv_ogm.c

401

pr_err("Error - can't forward packet: incoming iface not specified\n");

net/batman-adv/log.h

137

pr_err("%s: " fmt, _netdev->name, ## arg); \

net/batman-adv/tp_meter.c

912

pr_err("batadv: cannot create tp meter kthread\n");

net/bluetooth/ecdh_helper.c

75

pr_err("alg: ecdh: compute shared secret failed. err %d\n",

net/bluetooth/lib.c

296

pr_err("%pV", &vaf);

net/bridge/br.c

433

pr_err("bridge: can't register sap for STP\n");

net/bridge/netfilter/ebtables.c

1891

pr_err("wrong size: *len %d, entries_size %u, replsz %d\n",

net/caif/cfcnfg.c

323

pr_err("adap_layer is zero\n");

net/caif/cfcnfg.c

327

pr_err("adap_layer->receive is NULL\n");

net/caif/cfcnfg.c

331

pr_err("adap_layer->ctrlcmd == NULL\n");

net/caif/cfcnfg.c

338

pr_err("Specified PHY type does not exist!\n");

net/caif/cfcnfg.c

401

pr_err("ERROR: Link Layer Device disappeared while connecting\n");

net/caif/cfcnfg.c

435

pr_err("Protocol error. Link setup response - unknown channel type\n");

net/caif/cfctrl.c

220

pr_err("Duplicate connect request for same client\n");

net/caif/cfctrl.c

299

pr_err("Could not remove request (%d)", count);

net/caif/cfctrl.c

476

pr_err("Invalid O/E bit or parse error "

net/caif/cfctrl.c

519

pr_err("Frame Error Indication received\n");

net/caif/cfctrl.c

538

pr_err("Unrecognized Control Frame\n");

net/caif/cfdgml.c

50

pr_err("Packet is erroneous!\n");

net/caif/cfdgml.c

57

pr_err("Packet is erroneous!\n");

net/caif/cffrml.c

107

pr_err("Framing length error (%d)\n", len);

net/caif/cffrml.c

130

pr_err("Packet is erroneous!\n");

net/caif/cffrml.c

136

pr_err("Layr up is missing!\n");

net/caif/cffrml.c

163

pr_err("Packet is erroneous!\n");

net/caif/cffrml.c

98

pr_err("Invalid frame length (%d)\n", len);

net/caif/cfmuxl.c

181

pr_err("erroneous Caif Packet\n");

net/caif/cfsrvl.c

116

pr_err("Packet is erroneous!\n");

net/caif/cfsrvl.c

137

pr_err("Packet is erroneous!\n");

net/caif/cfutill.c

49

pr_err("Packet is erroneous!\n");

net/caif/cfutill.c

66

pr_err("REMOTE SHUTDOWN REQUEST RECEIVED\n");

net/caif/cfveil.c

49

pr_err("Packet is erroneous!\n");

net/caif/cfveil.c

87

pr_err("Packet is erroneous!\n");

net/caif/cfvidl.c

40

pr_err("Packet is erroneous!\n");

net/can/af_can.c

753

pr_err("can: protocol number %d out of range\n", proto);

net/can/af_can.c

764

pr_err("can: protocol %d already registered\n", proto);

net/can/isotp.c

1755

pr_err("can: registration of isotp protocol failed %pe\n", ERR_PTR(err));

net/can/j1939/main.c

410

pr_err("can: registration of j1939 protocol failed\n");

net/can/raw.c

1116

pr_err("can: registration of raw protocol failed\n");

net/ceph/auth.c

183

pr_err("auth protocol '%s' building request failed: %d\n",

net/ceph/auth.c

251

pr_err("auth protocol '%s' init failed: %d\n",

net/ceph/auth.c

261

pr_err("auth protocol '%s' mauth authentication failed: %d\n",

net/ceph/auth.c

281

pr_err("failed to decode auth msg\n");

net/ceph/auth.c

34

pr_err("bad auth protocol %d\n", proto);

net/ceph/auth.c

44

pr_err("got zero global_id\n");

net/ceph/auth.c

441

pr_err("auth protocol '%s' init failed: %d\n",

net/ceph/auth.c

47

pr_err("global_id changed from %llu to %llu\n", ac->global_id,

net/ceph/auth.c

519

pr_err("auth protocol '%s' not allowed\n",

net/ceph/auth.c

526

pr_err("preferred mode '%s' not allowed\n",

net/ceph/auth.c

529

pr_err("no fallback mode\n");

net/ceph/auth.c

531

pr_err("fallback mode '%s' not allowed\n",

net/ceph/auth.c

538

pr_err("auth protocol '%s' msgr authentication failed: %d\n",

net/ceph/auth.c

625

pr_err("auth protocol '%s' not allowed by %s\n",

net/ceph/auth.c

633

pr_err("preferred mode '%s' not allowed by %s\n",

net/ceph/auth.c

637

pr_err("no fallback mode\n");

net/ceph/auth.c

639

pr_err("fallback mode '%s' not allowed by %s\n",

net/ceph/auth.c

647

pr_err("auth protocol '%s' authorization to %s failed: %d\n",

net/ceph/auth_x.c

1183

pr_err("no secret set (for auth_x protocol)\n");

net/ceph/auth_x.c

1189

pr_err("cannot clone key: %d\n", ret);

net/ceph/auth_x.c

1196

pr_err("cannot prepare key: %d\n", ret);

net/ceph/auth_x.c

120

pr_err("%s bad magic\n", __func__);

net/ceph/auth_x.c

452

pr_err("failed to encrypt authorizer: %d", ret);

net/ceph/auth_x.c

644

pr_err("connection secret too big %d\n", len);

net/ceph/auth_x.c

657

pr_err("failed to decode connection secret\n");

net/ceph/auth_x.c

895

pr_err("failed to decrypt authorize challenge: %d", ret);

net/ceph/auth_x.c

901

pr_err("failed to encrypt authorizer w/ challenge: %d", ret);

net/ceph/auth_x.c

965

pr_err("failed to authenticate server\n");

net/ceph/ceph_common.c

109

pr_err("bad fsid, had %pU got %pU",

net/ceph/crypto.c

122

pr_err("secret too big %d\n", key->len);

net/ceph/crypto.c

299

pr_err("%s %scrypt failed: %d\n", __func__,

net/ceph/crypto.c

316

pr_err("%s got bad padding %d on in_len %d\n",

net/ceph/crypto.c

346

pr_err("%s encrypt failed: %d\n", __func__, ret);

net/ceph/crypto.c

377

pr_err("%s decrypt failed: %d\n", __func__, ret);

net/ceph/decode.c

109

pr_err("bad addrvec marker %d\n", marker);

net/ceph/decode.c

125

pr_err("another match of type %d in addrvec\n",

net/ceph/decode.c

144

pr_err("no match of type %d in addrvec\n", le32_to_cpu(my_type));

net/ceph/messenger.c

2010

pr_err("msg_new can't create type %d front %d\n", type,

net/ceph/messenger.c

260

pr_err("msgr_init failed to create workqueue\n");

net/ceph/messenger.c

470

pr_err("connect %s error %d\n",

net/ceph/messenger_v1.c

1111

pr_err("failed to allocate bounce page\n");

net/ceph/messenger_v1.c

1166

pr_err("read_partial_message bad hdr crc %u != expected %u\n",

net/ceph/messenger_v1.c

1193

pr_err("read_partial_message bad seq %lld expected %lld\n",

net/ceph/messenger_v1.c

1281

pr_err("read_partial_message %p front crc %u != exp. %u\n",

net/ceph/messenger_v1.c

1286

pr_err("read_partial_message %p middle crc %u != exp %u\n",

net/ceph/messenger_v1.c

1293

pr_err("read_partial_message %p data crc %u != exp. %u\n", m,

net/ceph/messenger_v1.c

1300

pr_err("read_partial_message %p signature check failed\n", m);

net/ceph/messenger_v1.c

1459

pr_err("try_read bad tag %d\n", con->v1.in_tag);

net/ceph/messenger_v1.c

662

pr_err("authorizer reply too big: %d > %zu\n", size,

net/ceph/messenger_v1.c

689

pr_err("connect to %s got bad banner\n",

net/ceph/messenger_v1.c

783

pr_err("%s%lld %s feature set mismatch,"

net/ceph/messenger_v1.c

792

pr_err("%s%lld %s protocol version mismatch,"

net/ceph/messenger_v1.c

881

pr_err("%s%lld %s protocol feature mismatch,"

net/ceph/messenger_v1.c

999

pr_err("failed to allocate bounce page\n");

net/ceph/messenger_v2.c

1846

pr_err("failed to allocate bounce page\n");

net/ceph/messenger_v2.c

1985

pr_err("failed to allocate bounce page\n");

net/ceph/messenger_v2.c

2166

pr_err("msgr2 feature set mismatch: my required > server's supported 0x%llx, need 0x%llx\n",

net/ceph/messenger_v2.c

2172

pr_err("msgr2 feature set mismatch: server's required > my supported 0x%llx, missing 0x%llx\n",

net/ceph/messenger_v2.c

2181

pr_err("prepare_hello failed: %d\n", ret);

net/ceph/messenger_v2.c

2190

pr_err("failed to decode banner payload\n");

net/ceph/messenger_v2.c

2209

pr_err("failed to decode addr_for_me: %d\n", ret);

net/ceph/messenger_v2.c

2217

pr_err("bad peer type, want %d, got %d\n",

net/ceph/messenger_v2.c

2249

pr_err("prepare_auth_request failed: %d\n", ret);

net/ceph/messenger_v2.c

2257

pr_err("failed to decode hello\n");

net/ceph/messenger_v2.c

2282

pr_err("allowed_protos too big %d\n", allowed_proto_cnt);

net/ceph/messenger_v2.c

2293

pr_err("allowed_modes too big %d\n", allowed_mode_cnt);

net/ceph/messenger_v2.c

2319

pr_err("failed to decode auth_bad_method\n");

net/ceph/messenger_v2.c

2343

pr_err("prepare_auth_request_more failed: %d\n", ret);

net/ceph/messenger_v2.c

2350

pr_err("failed to decode auth_reply_more\n");

net/ceph/messenger_v2.c

2411

pr_err("prepare_auth_signature failed: %d\n", ret);

net/ceph/messenger_v2.c

2423

pr_err("failed to decode auth_done\n");

net/ceph/messenger_v2.c

2453

pr_err("prepare_client_ident failed: %d\n", ret);

net/ceph/messenger_v2.c

2461

pr_err("prepare_session_reconnect failed: %d\n", ret);

net/ceph/messenger_v2.c

2471

pr_err("failed to decode auth_signature\n");

net/ceph/messenger_v2.c

2494

pr_err("failed to decode server addrs: %d\n", ret);

net/ceph/messenger_v2.c

2511

pr_err("bad peer addr/nonce, want %s/%u, got %s/%u\n",

net/ceph/messenger_v2.c

2520

pr_err("RADOS feature set mismatch: my required > server's supported 0x%llx, need 0x%llx\n",

net/ceph/messenger_v2.c

2555

pr_err("failed to decode server_ident\n");

net/ceph/messenger_v2.c

2571

pr_err("RADOS feature set mismatch: server's required > my supported 0x%llx, missing 0x%llx\n",

net/ceph/messenger_v2.c

2577

pr_err("failed to decode ident_missing_features\n");

net/ceph/messenger_v2.c

2606

pr_err("failed to decode session_reconnect_ok\n");

net/ceph/messenger_v2.c

2632

pr_err("prepare_session_reconnect (cseq) failed: %d\n", ret);

net/ceph/messenger_v2.c

2639

pr_err("failed to decode session_retry\n");

net/ceph/messenger_v2.c

2665

pr_err("prepare_session_reconnect (gseq) failed: %d\n", ret);

net/ceph/messenger_v2.c

2672

pr_err("failed to decode session_retry_global\n");

net/ceph/messenger_v2.c

2712

pr_err("prepare_client_ident (rst) failed: %d\n", ret);

net/ceph/messenger_v2.c

2720

pr_err("failed to decode session_reset\n");

net/ceph/messenger_v2.c

2740

pr_err("failed to decode keepalive2_ack\n");

net/ceph/messenger_v2.c

2760

pr_err("failed to decode ack\n");

net/ceph/messenger_v2.c

2812

pr_err("bad tag %d\n", tag);

net/ceph/messenger_v2.c

2854

pr_err("bad seq %llu, expected %llu\n", seq, con->in_seq + 1);

net/ceph/messenger_v2.c

2876

pr_err("failed to decode message header\n");

net/ceph/messenger_v2.c

3324

pr_err("prepare_keepalive2 failed: %d\n", ret);

net/ceph/messenger_v2.c

3330

pr_err("prepare_message failed: %d\n", ret);

net/ceph/messenger_v2.c

3336

pr_err("prepare_ack failed: %d\n", ret);

net/ceph/messenger_v2.c

3379

pr_err("prepare_read_banner_prefix failed: %d\n", ret);

net/ceph/messenger_v2.c

3387

pr_err("prepare_banner failed: %d\n", ret);

net/ceph/messenger_v2.c

3394

pr_err("ceph_tcp_connect failed: %d\n", ret);

net/ceph/messenger_v2.c

510

pr_err("bad preamble crc, calculated %u, expected %u\n",

net/ceph/messenger_v2.c

521

pr_err("bad segment count %d\n", desc->fd_seg_cnt);

net/ceph/messenger_v2.c

535

pr_err("bad control segment length %d\n", desc->fd_lens[0]);

net/ceph/messenger_v2.c

541

pr_err("bad front segment length %d\n", desc->fd_lens[1]);

net/ceph/messenger_v2.c

546

pr_err("bad middle segment length %d\n", desc->fd_lens[2]);

net/ceph/messenger_v2.c

551

pr_err("bad data segment length %d\n", desc->fd_lens[3]);

net/ceph/messenger_v2.c

556

pr_err("last segment empty, segment count %d\n",

net/ceph/messenger_v2.c

589

pr_err("bad late_status 0x%x\n", late_status);

net/ceph/messenger_v2.c

649

pr_err("bad control crc, calculated %u, expected %u\n",

net/ceph/messenger_v2.c

684

pr_err("bad front crc, calculated %u, expected %u\n",

net/ceph/messenger_v2.c

689

pr_err("bad middle crc, calculated %u, expected %u\n",

net/ceph/messenger_v2.c

694

pr_err("bad data crc, calculated %u, expected %u\n",

net/ceph/messenger_v2.c

715

pr_err("bad con_mode %d\n", con->v2.con_mode);

net/ceph/messenger_v2.c

734

pr_err("con_secret too small %d\n", con_secret_len);

net/ceph/messenger_v2.c

744

pr_err("failed to allocate gcm tfm context: %d\n", ret);

net/ceph/messenger_v2.c

752

pr_err("failed to set gcm key: %d\n", ret);

net/ceph/messenger_v2.c

759

pr_err("failed to set gcm tag size: %d\n", ret);

net/ceph/messenger_v2.c

765

pr_err("failed to allocate gcm request\n");

net/ceph/mon_client.c

1484

pr_err("received unknown message type %d %s\n", type,

net/ceph/mon_client.c

410

pr_err("got corrupt subscribe-ack msg\n");

net/ceph/mon_client.c

554

pr_err("problem decoding monmap, %d\n",

net/ceph/mon_client.c

766

pr_err("corrupt statfs reply, tid %llu\n", tid);

net/ceph/mon_client.c

848

pr_err("corrupt mon_get_version reply, tid %llu\n", tid);

net/ceph/mon_client.c

968

pr_err("corrupt mon_command ack, tid %llu\n", tid);

net/ceph/osd_client.c

1033

pr_err("unsupported osd opcode %s\n",

net/ceph/osd_client.c

1842

pr_err("got struct_v %d < 4 of hobject_t\n", struct_v);

net/ceph/osd_client.c

3032

pr_err("failed to allocate error-lwork\n");

net/ceph/osd_client.c

3779

pr_err("failed to decode MOSDOpReply for tid %llu: %d\n",

net/ceph/osd_client.c

3840

pr_err("num_ops %d != %d for tid %llu\n", m.num_ops,

net/ceph/osd_client.c

3852

pr_err("sum of lens %u != %u for tid %llu\n", data_len,

net/ceph/osd_client.c

4239

pr_err("osdc handle_map corrupt msg\n");

net/ceph/osd_client.c

4411

pr_err("%s failed to allocate spg\n", __func__);

net/ceph/osd_client.c

4420

pr_err("%s failed to allocate backoff\n", __func__);

net/ceph/osd_client.c

4439

pr_err("%s failed to allocate msg\n", __func__);

net/ceph/osd_client.c

4469

pr_err("%s osd%d spgid %llu.%xs%d id %llu backoff dne\n",

net/ceph/osd_client.c

4477

pr_err("%s osd%d spgid %llu.%xs%d id %llu bad range?\n",

net/ceph/osd_client.c

4532

pr_err("failed to decode MOSDBackoff: %d\n", ret);

net/ceph/osd_client.c

4545

pr_err("%s osd%d unknown op %d\n", __func__, osd->o_osd, m.op);

net/ceph/osd_client.c

4633

pr_err("failed to allocate notify-lwork\n");

net/ceph/osd_client.c

4652

pr_err("osdc handle_watch_notify corrupt msg\n");

net/ceph/osd_client.c

5380

pr_err("received unknown message type %d %s\n", type,

net/ceph/osd_client.c

5837

pr_err("%s: failed to allocate %u extents\n",

net/ceph/osdmap.c

1795

pr_err("corrupt full osdmap (%d) epoch %d off %d (%p of %p-%p)\n",

net/ceph/osdmap.c

2107

pr_err("corrupt inc osdmap (%d) epoch %d off %d (%p of %p-%p)\n",

net/ceph/osdmap.c

2563

pr_err("no crush rule: pool %lld ruleset %d type %d size %d\n",

net/ceph/osdmap.c

2578

pr_err("error %d from crush rule %d: pool %lld ruleset %d type %d size %d\n",

net/ceph/osdmap.c

462

pr_err("crush_decode magic %x != current %x\n",

net/core/dev.c

12036

pr_err("alloc_netdev: Unable to allocate device with zero queues\n");

net/core/dev.c

12041

pr_err("alloc_netdev: Unable to allocate device with zero RX queues\n");

net/core/dev.c

1660

pr_err("kthread_run failed with err %d\n", err);

net/core/dev.c

8783

pr_err("Adjacency does not exist for device %s from %s\n",

net/core/drop_monitor.c

1732

pr_err("Unable to store program counters on this arch, Drop monitor failed\n");

net/core/drop_monitor.c

1749

pr_err("Could not create drop monitor netlink family\n");

net/core/ieee8021q_helpers.c

102

pr_err("Requested Traffic Type (%d) is out of range (%d)\n", tt,

net/core/ieee8021q_helpers.c

134

pr_err("Invalid number of queues %d\n", num_queues);

net/core/pktgen.c

1960

pr_err("ERROR: No thread\n");

net/core/pktgen.c

2071

pr_err("%s: timed out after waiting %d msec for device %s to be removed\n",

net/core/pktgen.c

2102

pr_err("can't move proc entry for '%s'\n",

net/core/pktgen.c

2172

pr_err("no such netdevice: \"%s\"\n", ifname);

net/core/pktgen.c

2177

pr_err("not an ethernet or loopback device: \"%s\"\n", ifname);

net/core/pktgen.c

2180

pr_err("device is down: \"%s\"\n", ifname);

net/core/pktgen.c

2200

pr_err("ERROR: pkt_dev->odev == NULL in setup_inject\n");

net/core/pktgen.c

2273

pr_err("ERROR: IPv6 link address not available\n");

net/core/pktgen.c

2772

pr_err("Error expanding ipsec packet %d\n",

net/core/pktgen.c

2782

pr_err("Error creating ipsec packet %d\n", ret);

net/core/pktgen.c

3553

pr_err("ERROR: couldn't allocate skb in fill_packet\n");

net/core/pktgen.c

3811

pr_err("ERROR: already assigned to a thread\n");

net/core/pktgen.c

3837

pr_err("ERROR: interface already used\n");

net/core/pktgen.c

3882

pr_err("cannot create %s/%s procfs entry\n",

net/core/pktgen.c

3924

pr_err("ERROR: out of memory, can't create new thread\n");

net/core/pktgen.c

3938

pr_err("kthread_create_on_node() failed for cpu %d\n", t->cpu);

net/core/pktgen.c

3949

pr_err("cannot create %s/%s procfs entry\n",

net/core/pktgen.c

4035

pr_err("cannot create %s procfs entry\n", PGCTRL);

net/core/pktgen.c

4052

pr_err("Initialization failed for all threads\n");

net/core/skbuff.c

6870

pr_err("Not enough bytes to eat. Want %d\n", eat);

net/core/sock.c

4087

pr_err("PROTO_INUSE_NR exhausted\n");

net/core/sock.c

4188

pr_err("%s: missing sysctl_mem\n", prot->name);

net/core/sock.c

4192

pr_err("%s: missing per_cpu_fw_alloc\n", prot->name);

net/core/sock.c

874

pr_err("%s: sock not bind to device\n", __func__);

net/core/utils.c

396

pr_err("unexpected address family %d\n", af);

net/dsa/dsa.c

385

pr_err("DSA: tree %d has no CPU port\n", dst->index);

net/dsa/dsa.c

876

pr_err("DSA: tree %d already setup! Disjoint trees?\n",

net/dsa/port.c

1650

pr_err("error creating PHYLINK: %ld\n", PTR_ERR(pl));

net/dsa/port.c

1680

pr_err("could not attach to PHY: %d\n", err);

net/dsa/user.c

3867

pr_err("DSA: failed to unregister switchdev blocking notifier (%d)\n", err);

net/dsa/user.c

3871

pr_err("DSA: failed to unregister switchdev notifier (%d)\n", err);

net/dsa/user.c

3875

pr_err("DSA: failed to unregister user notifier (%d)\n", err);

net/hsr/hsr_debugfs.c

114

pr_err("Cannot create hsr debugfs root directory\n");

net/hsr/hsr_debugfs.c

80

pr_err("Cannot create hsr debugfs directory\n");

net/hsr/hsr_debugfs.c

90

pr_err("Cannot create hsr node_table file\n");

net/ieee802154/nl802154.c

1456

pr_err("Failure starting scanning (%d)\n", err);

net/ieee802154/nl802154.c

1602

pr_err("Failure starting sending beacons (%d)\n", err);

net/ieee802154/nl802154.c

1660

pr_err("Association with PAN ID 0x%x failed (%d)\n",

net/ipv4/af_inet.c

1242

pr_err("Attempt to override permanent protocol %d\n", protocol);

net/ipv4/af_inet.c

1246

pr_err("Ignoring attempt to register invalid socket type %d\n",

net/ipv4/af_inet.c

1255

pr_err("Attempt to unregister permanent protocol %d\n",

net/ipv4/af_inet.c

151

pr_err("Attempt to release TCP socket in state %d %p\n",

net/ipv4/af_inet.c

156

pr_err("Attempt to release alive inet socket %p\n", sk);

net/ipv4/devinet.c

260

pr_err("Freeing alive in_device %p\n", idev);

net/ipv4/fou_core.c

1184

pr_err("can't add fou ops\n");

net/ipv4/fou_core.c

1190

pr_err("can't add gue ops\n");

net/ipv4/gre_demux.c

205

pr_err("can't add protocol\n");

net/ipv4/igmp.c

3128

pr_err("Failed to initialize the IGMP autojoin socket (err %d)\n",

net/ipv4/ip_vti.c

720

pr_err("vti init: failed to register %s\n", msg);

net/ipv4/ipconfig.c

1201

pr_err("IP-Config: Incomplete network configuration information\n");

net/ipv4/ipconfig.c

1207

pr_err("DHCP/BOOTP: No suitable device found\n");

net/ipv4/ipconfig.c

1211

pr_err("RARP: No suitable device found\n");

net/ipv4/ipconfig.c

1549

pr_err("IP-Config: Retrying forever (NFS root)...\n");

net/ipv4/ipconfig.c

1555

pr_err("IP-Config: Retrying forever (CIFS root)...\n");

net/ipv4/ipconfig.c

1561

pr_err("IP-Config: Reopening network devices...\n");

net/ipv4/ipconfig.c

1566

pr_err("IP-Config: Auto-configuration of network failed\n");

net/ipv4/ipconfig.c

1570

pr_err("IP-Config: Incomplete network configuration information\n");

net/ipv4/ipconfig.c

225

pr_err("IP-Config: Failed to open %s\n", dev->name);

net/ipv4/ipconfig.c

243

pr_err("IP-Config: Failed to open %s\n",

net/ipv4/ipconfig.c

306

pr_err("IP-Config: Device `%s' not found\n",

net/ipv4/ipconfig.c

309

pr_err("IP-Config: No network devices available\n");

net/ipv4/ipconfig.c

377

pr_err("IP-Config: Unable to set interface address (%d)\n",

net/ipv4/ipconfig.c

383

pr_err("IP-Config: Unable to set interface netmask (%d)\n",

net/ipv4/ipconfig.c

389

pr_err("IP-Config: Unable to set interface broadcast address (%d)\n",

net/ipv4/ipconfig.c

400

pr_err("IP-Config: Unable to set interface mtu to %d (%d)\n",

net/ipv4/ipconfig.c

417

pr_err("IP-Config: Gateway not on directly connected network\n");

net/ipv4/ipconfig.c

425

pr_err("IP-Config: Cannot add default route (%d)\n",

net/ipv4/ipconfig.c

461

pr_err("IP-Config: Unable to guess netmask for address %pI4\n",

net/ipv4/ipmr.c

1262

pr_err("ipmr: rhtable insert error %d\n", ret);

net/ipv4/ipmr.c

3314

pr_err("%s: can't add PIM protocol\n", __func__);

net/ipv4/nexthop.c

2091

pr_err("%s\n", extack._msg);

net/ipv4/route.c

3774

pr_err("Unable to create route proc files\n");

net/ipv4/tcp_cong.c

83

pr_err("%s does not implement required ops\n", ca->name);

net/ipv4/tcp_input.c

4991

pr_err("%s: Impossible, sk->sk_state=%d\n",

net/ipv4/tcp_output.c

3895

pr_err("%s: wrong queue state\n", __func__);

net/ipv4/tcp_timer.c

796

pr_err("Hmm... keepalive on a LISTEN ???\n");

net/ipv4/tunnel4.c

273

pr_err("%s: can't add protocol\n", __func__);

net/ipv4/tunnel4.c

281

pr_err("tunnel4 close: can't remove input afinfo\n");

net/ipv4/tunnel4.c

285

pr_err("tunnelmpls4 close: can't remove protocol\n");

net/ipv4/tunnel4.c

289

pr_err("tunnel64 close: can't remove protocol\n");

net/ipv4/tunnel4.c

292

pr_err("tunnel4 close: can't remove protocol\n");

net/ipv4/udplite.c

128

pr_err("%s: Cannot register /proc!\n", __func__);

net/ipv4/xfrm4_protocol.c

255

pr_err("%s: can't add protocol\n", __func__);

net/ipv4/xfrm4_protocol.c

290

pr_err("%s: can't remove protocol\n", __func__);

net/ipv6/af_inet6.c

790

pr_err("Attempt to override permanent protocol %d\n", protocol);

net/ipv6/af_inet6.c

794

pr_err("Ignoring attempt to register invalid socket type %d\n",

net/ipv6/af_inet6.c

804

pr_err("Attempt to unregister permanent protocol %d\n",

net/ipv6/anycast.c

318

pr_err("Failed to fill in anycast addresses (err %d)\n", err);

net/ipv6/fou6.c

176

pr_err("can't add fou6 ops\n");

net/ipv6/fou6.c

182

pr_err("can't add gue6 ops\n");

net/ipv6/icmp.c

1277

pr_err("Failed to initialize the ICMP6 control socket (err %d)\n",

net/ipv6/icmp.c

1302

pr_err("Failed to register ICMP6 protocol\n");

net/ipv6/ip6_tunnel.c

2380

pr_err("%s: can't register ip4ip6\n", __func__);

net/ipv6/ip6_tunnel.c

2386

pr_err("%s: can't register ip6ip6\n", __func__);

net/ipv6/ip6_tunnel.c

2393

pr_err("%s: can't register mplsip6\n", __func__);

net/ipv6/ip6_vti.c

1288

pr_err("vti6 init: failed to register %s\n", msg);

net/ipv6/ip6mr.c

1411

pr_err("%s: can't add PIM protocol\n", __func__);

net/ipv6/ip6mr.c

1497

pr_err("ip6mr: rhtable insert error %d\n", err);

net/ipv6/mcast.c

3175

pr_err("Failed to initialize the IGMP6 control socket (err %d)\n",

net/ipv6/mcast.c

3186

pr_err("Failed to initialize the IGMP6 autojoin socket (err %d)\n",

net/ipv6/netfilter/nf_defrag_ipv6_hooks.c

116

pr_err("nf_defrag_ipv6: can't initialize frag6.\n");

net/ipv6/netfilter/nf_defrag_ipv6_hooks.c

121

pr_err("nf_defrag_ipv6: can't register pernet ops\n");

net/ipv6/tunnel6.c

260

pr_err("%s: can't add protocol\n", __func__);

net/ipv6/tunnel6.c

264

pr_err("%s: can't add protocol\n", __func__);

net/ipv6/tunnel6.c

270

pr_err("%s: can't add protocol\n", __func__);

net/ipv6/tunnel6.c

277

pr_err("%s: can't add input afinfo\n", __func__);

net/ipv6/tunnel6.c

292

pr_err("%s: can't remove input afinfo\n", __func__);

net/ipv6/tunnel6.c

295

pr_err("%s: can't remove protocol\n", __func__);

net/ipv6/tunnel6.c

297

pr_err("%s: can't remove protocol\n", __func__);

net/ipv6/tunnel6.c

300

pr_err("%s: can't remove protocol\n", __func__);

net/ipv6/xfrm6_protocol.c

271

pr_err("%s: can't add protocol\n", __func__);

net/ipv6/xfrm6_protocol.c

306

pr_err("%s: can't remove protocol\n", __func__);

net/iucv/af_iucv.c

1085

pr_err(

net/iucv/af_iucv.c

282

pr_err("Attempt to release alive iucv socket %p\n", sk);

net/key/af_key.c

103

pr_err("Attempt to release alive pfkey socket: %p\n", sk);

net/key/af_key.c

1462

pr_err("pfkey: Unknown policy event %d\n", event);

net/key/af_key.c

1481

pr_err("pfkey: Unknown SA event %d\n", event);

net/key/af_key.c

3110

pr_err("pfkey: Unknown SA event %d\n", c->event);

net/key/af_key.c

3134

pr_err("pfkey: Unknown policy event %d\n", c->event);

net/l2tp/l2tp_core.c

1884

pr_err("l2tp: %s IDR not empty at net %d exit\n", idr_name, id);

net/l2tp/l2tp_core.c

1926

pr_err("alloc_workqueue failed\n");

net/mac80211/debug.h

120

pr_err("%s: " fmt, \

net/mac80211/status.c

926

pr_err("ieee80211_tx_status: headroom too small\n");

net/mac80211/trace.c

56

pr_err("%pV", &vaf);

net/mac802154/main.c

79

pr_err("failure to allocate master IEEE802.15.4 device\n");

net/mpls/af_mpls.c

2864

pr_err("Can't add mpls over gre tunnel ops\n");

net/mptcp/sched.c

88

pr_err("%s does not implement required ops\n", sched->name);

net/ncsi/ncsi-netlink.c

46

pr_err("NCSI netlink: No device for ifindex %u\n", ifindex);

net/netfilter/core.c

786

pr_err("cannot create netfilter proc entry");

net/netfilter/ipset/ip_set_core.c

2420

pr_err("ip_set: cannot register pernet_subsys.\n");

net/netfilter/ipset/ip_set_core.c

2426

pr_err("ip_set: cannot register with nfnetlink.\n");

net/netfilter/ipset/ip_set_core.c

2433

pr_err("SO_SET registry failed: %d\n", ret);

net/netfilter/ipvs/ip_vs_conn.c

182

pr_err("%s(): request for already hashed, called from %pS\n",

net/netfilter/ipvs/ip_vs_core.c

2392

pr_err("can't setup control.\n");

net/netfilter/ipvs/ip_vs_core.c

2400

pr_err("can't setup connection table.\n");

net/netfilter/ipvs/ip_vs_core.c

2414

pr_err("can't register netlink/ioctl.\n");

net/netfilter/ipvs/ip_vs_core.c

517

pr_err("Schedule: port zero only supported "

net/netfilter/ipvs/ip_vs_ctl.c

1134

pr_err("%s(): server weight less than zero\n", __func__);

net/netfilter/ipvs/ip_vs_ctl.c

1139

pr_err("%s(): lower threshold is higher than upper threshold\n",

net/netfilter/ipvs/ip_vs_ctl.c

1146

pr_err("%s(): tunnel port is zero\n", __func__);

net/netfilter/ipvs/ip_vs_ctl.c

1204

pr_err("%s(): server weight less than zero\n", __func__);

net/netfilter/ipvs/ip_vs_ctl.c

1209

pr_err("%s(): lower threshold is higher than upper threshold\n",

net/netfilter/ipvs/ip_vs_ctl.c

1216

pr_err("%s(): tunnel port is zero\n", __func__);

net/netfilter/ipvs/ip_vs_ctl.c

2779

pr_err("set_ctl: invalid protocol: %d %pI4:%d\n",

net/netfilter/ipvs/ip_vs_ctl.c

3098

pr_err("length: %u != %zu\n", *len, size);

net/netfilter/ipvs/ip_vs_ctl.c

3139

pr_err("length: %u != %zu\n", *len, size);

net/netfilter/ipvs/ip_vs_ctl.c

350

pr_err("%s(): request for already hashed, called from %pS\n",

net/netfilter/ipvs/ip_vs_ctl.c

384

pr_err("%s(): request for unhash flagged, called from %pS\n",

net/netfilter/ipvs/ip_vs_ctl.c

4052

pr_err("unknown Generic Netlink command\n");

net/netfilter/ipvs/ip_vs_ctl.c

4122

pr_err("not enough space in Netlink message\n");

net/netfilter/ipvs/ip_vs_ctl.c

4506

pr_err("cannot register sockopt.\n");

net/netfilter/ipvs/ip_vs_ctl.c

4512

pr_err("cannot register Generic Netlink interface.\n");

net/netfilter/ipvs/ip_vs_pe.c

81

pr_err("%s(): [%s] pe already existed "

net/netfilter/ipvs/ip_vs_proto_udp.c

450

pr_err("UDP no ns data\n");

net/netfilter/ipvs/ip_vs_sched.c

171

pr_err("%s(): NULL arg\n", __func__);

net/netfilter/ipvs/ip_vs_sched.c

176

pr_err("%s(): NULL scheduler_name\n", __func__);

net/netfilter/ipvs/ip_vs_sched.c

189

pr_err("%s(): [%s] scheduler already linked\n",

net/netfilter/ipvs/ip_vs_sched.c

202

pr_err("%s(): [%s] scheduler already existed "

net/netfilter/ipvs/ip_vs_sched.c

225

pr_err("%s(): NULL arg\n", __func__);

net/netfilter/ipvs/ip_vs_sched.c

232

pr_err("%s(): [%s] scheduler is not in the list. failed\n",

net/netfilter/ipvs/ip_vs_sched.c

47

pr_err("%s(): init error\n", __func__);

net/netfilter/ipvs/ip_vs_sync.c

1426

pr_err("You probably need to specify IP address on "

net/netfilter/ipvs/ip_vs_sync.c

1475

pr_err("Error during creation of socket; terminating\n");

net/netfilter/ipvs/ip_vs_sync.c

1481

pr_err("Error setting outbound mcast interface\n");

net/netfilter/ipvs/ip_vs_sync.c

1498

pr_err("Error binding address of the mcast interface\n");

net/netfilter/ipvs/ip_vs_sync.c

1506

pr_err("Error connecting to the multicast addr\n");

net/netfilter/ipvs/ip_vs_sync.c

1532

pr_err("Error during creation of socket; terminating\n");

net/netfilter/ipvs/ip_vs_sync.c

1546

pr_err("Error binding to the multicast addr\n");

net/netfilter/ipvs/ip_vs_sync.c

1560

pr_err("Error joining to the multicast group\n");

net/netfilter/ipvs/ip_vs_sync.c

1597

pr_err("ip_vs_send_async error %d\n", ret);

net/netfilter/ipvs/ip_vs_sync.c

1726

pr_err("receiving message error\n");

net/netfilter/ipvs/ip_vs_sync.c

1787

pr_err("Unknown mcast interface: %s\n", c->mcast_ifn);

net/netfilter/ipvs/ip_vs_sync.c

2033

pr_err("Failed to stop Master Daemon\n");

net/netfilter/ipvs/ip_vs_sync.c

2037

pr_err("Failed to stop Backup Daemon\n");

net/netfilter/ipvs/ip_vs_sync.c

582

pr_err("ip_vs_sync_buff_create failed.\n");

net/netfilter/ipvs/ip_vs_sync.c

704

pr_err("ip_vs_sync_buff_create failed.\n");

net/netfilter/nf_conntrack_ftp.c

596

pr_err("failed to register helpers\n");

net/netfilter/nf_conntrack_irc.c

271

pr_err("max_dcc_channels must not be zero\n");

net/netfilter/nf_conntrack_irc.c

276

pr_err("max_dcc_channels must not be more than %u\n",

net/netfilter/nf_conntrack_irc.c

300

pr_err("failed to register helpers\n");

net/netfilter/nf_conntrack_netlink.c

3877

pr_err("ctnetlink_init: cannot register with nfnetlink.\n");

net/netfilter/nf_conntrack_netlink.c

3883

pr_err("ctnetlink_init: cannot register exp with nfnetlink.\n");

net/netfilter/nf_conntrack_netlink.c

3889

pr_err("ctnetlink_init: cannot register pernet operations\n");

net/netfilter/nf_conntrack_sane.c

205

pr_err("failed to register helpers\n");

net/netfilter/nf_conntrack_sip.c

1710

pr_err("failed to register helpers\n");

net/netfilter/nf_conntrack_standalone.c

1154

pr_err("nf_conntrack: can't register to sysctl.\n");

net/netfilter/nf_conntrack_tftp.c

135

pr_err("failed to register helpers\n");

net/netfilter/nf_log_syslog.c

1055

pr_err("failed to register logger\n");

net/netfilter/nfnetlink_acct.c

536

pr_err("nfnl_acct_init: failed to register pernet ops\n");

net/netfilter/nfnetlink_acct.c

542

pr_err("nfnl_acct_init: cannot register with nfnetlink.\n");

net/netfilter/nfnetlink_cthelper.c

777

pr_err("nfnl_cthelper: cannot register with nfnetlink.\n");

net/netfilter/nfnetlink_cttimeout.c

641

pr_err("cttimeout_init: cannot register cttimeout with "

net/netfilter/nfnetlink_log.c

1166

pr_err("failed to register pernet ops\n");

net/netfilter/nfnetlink_log.c

1173

pr_err("failed to create netlink socket\n");

net/netfilter/nfnetlink_log.c

1179

pr_err("failed to register logger\n");

net/netfilter/nfnetlink_osf.c

431

pr_err("Failed to register OSF nsfnetlink helper (%d)\n", err);

net/netfilter/nft_compat.c

719

pr_err("nft_compat: unsupported protocol %d\n", family);

net/netfilter/nft_compat.c

965

pr_err("nft_compat: cannot register with nfnetlink.\n");

net/netfilter/xt_osf.c

53

pr_err("Failed to register OS fingerprint "

net/netrom/af_netrom.c

1398

pr_err("NET/ROM: %s - nr_ndevs parameter too large\n",

net/netrom/af_netrom.c

1406

pr_err("NET/ROM: %s - unable to allocate device array\n",

net/nfc/core.c

1126

pr_err("Could not register llcp device\n");

net/nfc/core.c

125

pr_err("SE discovery failed\n");

net/nfc/digital.h

16

#define PROTOCOL_ERR(req) pr_err("%d: NFC Digital Protocol error: %s\n", \

net/nfc/digital_core.c

207

pr_err("Unknown cmd type %d\n", cmd->type);

net/nfc/digital_core.c

214

pr_err("in_send_command returned err %d\n", rc);

net/nfc/digital_core.c

261

pr_err("in_configure_hw failed: %d\n", rc);

net/nfc/digital_core.c

272

pr_err("tg_configure_hw failed: %d\n", rc);

net/nfc/digital_core.c

371

pr_err("Invalid protocol %d\n", protocol);

net/nfc/digital_core.c

489

pr_err("Unknown protocol\n");

net/nfc/digital_core.c

494

pr_err("Already polling\n");

net/nfc/digital_core.c

499

pr_err("A target is already active\n");

net/nfc/digital_core.c

546

pr_err("Unsupported protocols: im=0x%x, tm=0x%x\n",

net/nfc/digital_core.c

563

pr_err("Polling operation was not running\n");

net/nfc/digital_core.c

627

pr_err("Can't activate a target while polling\n");

net/nfc/digital_core.c

632

pr_err("A target is already active\n");

net/nfc/digital_core.c

648

pr_err("No active target\n");

net/nfc/digital_core.c

807

pr_err("nfc_allocate_device failed\n");

net/nfc/digital_dep.c

1445

pr_err("Unsupported dsi value %d\n", dsi);

net/nfc/digital_technology.c

181

pr_err("ISO_DEP R-block and S-block not supported\n");

net/nfc/digital_technology.c

186

pr_err("DID field in ISO_DEP PCB not supported\n");

net/nfc/hci/core.c

388

pr_err("Discarded event %x to invalid pipe %x\n", event, pipe);

net/nfc/hci/core.c

394

pr_err("Discarded event %x to unopened pipe %x\n", event, pipe);

net/nfc/hci/hcp.c

131

pr_err("UNKNOWN MSG Type %d, instruction=%d\n",

net/nfc/hci/llc_shdlc.c

492

pr_err("UNKNOWN Control=%d\n", control);

net/nfc/hci/llc_shdlc.c

711

pr_err("NULL Frame -> link is dead\n");

net/nfc/llcp_commands.c

226

pr_err("Invalid gt tlv value 0x%x\n", type);

net/nfc/llcp_commands.c

269

pr_err("Invalid gt tlv value 0x%x\n", type);

net/nfc/llcp_commands.c

325

pr_err("Could not allocate PDU\n");

net/nfc/llcp_commands.c

459

pr_err("error %d\n", err);

net/nfc/llcp_commands.c

518

pr_err("error %d\n", err);

net/nfc/llcp_commands.c

666

pr_err("Pending queue is full %d frames\n",

net/nfc/llcp_commands.c

674

pr_err("Tx queue is full %d frames\n",

net/nfc/llcp_commands.c

769

pr_err("Could not allocate PDU (error=%d)\n", err);

net/nfc/llcp_core.c

1103

pr_err("Received out of sequence I PDU\n");

net/nfc/llcp_core.c

1113

pr_err("Receive queue is full\n");

net/nfc/llcp_core.c

1211

pr_err("Invalid CC\n");

net/nfc/llcp_core.c

1291

pr_err("Wrong SNL SAP\n");

net/nfc/llcp_core.c

1394

pr_err("Invalid SNL tlv value 0x%x\n", type);

net/nfc/llcp_core.c

1417

pr_err("Malformed AGF PDU\n");

net/nfc/llcp_core.c

1429

pr_err("Malformed AGF PDU\n");

net/nfc/llcp_core.c

1440

pr_err("Could not allocate PDU\n");

net/nfc/llcp_core.c

1552

pr_err("LLCP PDU receive err %d\n", err);

net/nfc/llcp_core.c

249

pr_err("SYMM timeout\n");

net/nfc/llcp_core.c

667

pr_err("No LLCP device\n");

net/nfc/llcp_core.c

676

pr_err("MAC does not support LLCP\n");

net/nfc/llcp_core.c

903

pr_err("Receive queue is full\n");

net/nfc/llcp_sock.c

853

pr_err("Recv datagram failed state %d %d %d",

net/nfc/llcp_sock.c

969

pr_err("Freeing alive NFC LLCP socket %p\n", sk);

net/nfc/nci/core.c

1033

pr_err("error when signaling tm deactivation\n");

net/nfc/nci/core.c

1057

pr_err("unable to exchange data, no active target\n");

net/nfc/nci/core.c

1085

pr_err("unable to send data\n");

net/nfc/nci/core.c

1197

pr_err("Too many proprietary commands: %zd\n",

net/nfc/nci/core.c

130

pr_err("wait_for_completion_interruptible_timeout failed %ld\n",

net/nfc/nci/core.c

1399

pr_err("no memory for command\n");

net/nfc/nci/core.c

1591

pr_err("unknown MT 0x%x\n", nci_mt(skb->data));

net/nfc/nci/core.c

837

pr_err("unable to start poll, since poll is already active\n");

net/nfc/nci/core.c

842

pr_err("there is an active target\n");

net/nfc/nci/core.c

860

pr_err("failed to set local general bytes\n");

net/nfc/nci/core.c

868

pr_err("failed to set listen parameters\n");

net/nfc/nci/core.c

888

pr_err("unable to stop poll, since poll is not active\n");

net/nfc/nci/core.c

910

pr_err("there is no available target to activate\n");

net/nfc/nci/core.c

915

pr_err("there is already an active target\n");

net/nfc/nci/core.c

927

pr_err("unable to find the selected target\n");

net/nfc/nci/core.c

932

pr_err("the requested nfc protocol is invalid\n");

net/nfc/nci/core.c

937

pr_err("target does not support the requested protocol 0x%x\n",

net/nfc/nci/core.c

978

pr_err("unable to deactivate target, no active target\n");

net/nfc/nci/data.c

194

pr_err("failed to fragment tx data packet\n");

net/nfc/nci/data.c

231

pr_err("error adding room for accumulated rx data\n");

net/nfc/nci/data.c

264

pr_err("unable to handle received data\n");

net/nfc/nci/data.c

59

pr_err("no rx callback, dropping rx data...\n");

net/nfc/nci/hci.c

396

pr_err("UNKNOWN MSG Type %d, instruction=%d\n",

net/nfc/nci/ntf.c

1033

pr_err("unknown ntf opcode 0x%x\n", ntf_opcode);

net/nfc/nci/ntf.c

341

pr_err("the target found does not have the desired protocol\n");

net/nfc/nci/ntf.c

384

pr_err("unsupported rf_tech_and_mode 0x%x\n", rf_tech_and_mode);

net/nfc/nci/ntf.c

502

pr_err("unsupported rf_tech_and_mode 0x%x\n",

net/nfc/nci/ntf.c

555

pr_err("unsupported activation_rf_tech_and_mode 0x%x\n",

net/nfc/nci/ntf.c

592

pr_err("unsupported activation_rf_tech_and_mode 0x%x\n",

net/nfc/nci/ntf.c

657

pr_err("unsupported activation_rf_tech_and_mode 0x%x\n",

net/nfc/nci/ntf.c

777

pr_err("unsupported activation_rf_tech_and_mode 0x%x\n",

net/nfc/nci/ntf.c

822

pr_err("unsupported rf_interface 0x%x\n",

net/nfc/nci/ntf.c

846

pr_err("unable to store general bytes\n");

net/nfc/nci/ntf.c

854

pr_err("unable to store ATS\n");

net/nfc/nci/ntf.c

884

pr_err("error when signaling tm activation\n");

net/nfc/nci/ntf.c

981

pr_err("unsupported ntf opcode 0x%x\n",

net/nfc/nci/rsp.c

363

pr_err("unsupported rsp opcode 0x%x\n",

net/nfc/nci/rsp.c

416

pr_err("unknown rsp opcode 0x%x\n", rsp_opcode);

net/nfc/nci/uart.c

382

pr_err("driver %d is already registered\n", nu->driver);

net/nfc/rawsock.c

329

pr_err("Freeing alive NFC raw socket %p\n", sk);

net/openvswitch/conntrack.c

1610

pr_err("openvswitch: failed to init nf_conncount %d\n", err);

net/packet/af_packet.c

1332

pr_err("Attempt to release alive packet socket: %p\n", sk);

net/packet/af_packet.c

2627

pr_err("Packet exceed the number of skb frags(%u)\n",

net/packet/af_packet.c

2672

pr_err("packet size is too long (%d > %d)\n", tp_len, size_max);

net/packet/af_packet.c

4553

pr_err("packet_mmap: vma is busy: %ld\n",

net/qrtr/af_qrtr.c

492

pr_err("qrtr: Invalid version %d\n", ver);

net/qrtr/ns.c

161

pr_err("failed to announce del service\n");

net/qrtr/ns.c

192

pr_err("failed to send lookup notification\n");

net/qrtr/ns.c

213

pr_err("failed to announce new service\n");

net/qrtr/ns.c

249

pr_err("failed to add server [0x%x:0x%x] ret:%d\n",

net/qrtr/ns.c

317

pr_err("failed to send hello msg\n");

net/qrtr/ns.c

376

pr_err("failed to send bye cmd\n");

net/qrtr/ns.c

450

pr_err("failed to send del client cmd\n");

net/qrtr/ns.c

479

pr_err("failed to announce new service\n");

net/qrtr/ns.c

618

pr_err("error receiving packet: %zd\n", msglen);

net/qrtr/ns.c

673

pr_err("failed while handling packet from %d:%d",

net/qrtr/ns.c

702

pr_err("failed to get socket name\n");

net/qrtr/ns.c

719

pr_err("failed to bind to socket\n");

net/qrtr/tun.c

162

pr_err("failed to register Qualcomm IPC Router tun device\n");

net/rds/ib.c

177

pr_err("RDS/IB: %s failed to allocate vector memory\n",

net/rds/ib_frmr.c

306

pr_err("RDS/IB: %s returned error(%d)\n", __func__, ret);

net/rxrpc/ar-internal.h

1647

pr_err("Assertion failed\n"); \

net/rxrpc/ar-internal.h

1657

pr_err("Assertion failed - %lu(0x%lx) %s %lu(0x%lx) is false\n", \

net/rxrpc/ar-internal.h

1667

pr_err("Assertion failed\n"); \

net/rxrpc/ar-internal.h

1677

pr_err("Assertion failed - %lu(0x%lx) %s %lu(0x%lx) is false\n", \

net/rxrpc/call_object.c

739

pr_err("Call %p still in use (%d,%s,%lx,%lx)!\n",

net/rxrpc/conn_client.c

61

pr_err("AF_RXRPC: Leaked client conn %p {%d}\n",

net/rxrpc/conn_object.c

481

pr_err("AF_RXRPC: Leaked conn %p {%d}\n",

net/rxrpc/key.c

561

pr_err("Unknown token type %x on rxrpc key\n",

net/rxrpc/key.c

778

pr_err("Unsupported key token type (%u)\n",

net/rxrpc/key.c

871

pr_err("Unsupported key token type (%u)\n",

net/rxrpc/local_object.c

480

pr_err("AF_RXRPC: Leaked local %p {%d}\n",

net/rxrpc/peer_object.c

462

pr_err("Leaked peer %x {%u} %pISp\n",

net/rxrpc/recvmsg.c

96

pr_err("Invalid terminal call state %u\n", call->completion);

net/rxrpc/rxperf.c

231

pr_err("Can't set up rxperf socket: %d\n", ret);

net/rxrpc/rxperf.c

327

pr_err("Call %u in bad state %u\n",

net/rxrpc/rxperf.c

571

pr_err("Can't allocate rxperf server key: %ld\n", PTR_ERR(kref));

net/rxrpc/rxperf.c

577

pr_err("Can't link rxperf server key: %d\n", ret);

net/rxrpc/rxperf.c

611

pr_err("Can't allocate rxperf server key: %ld\n", PTR_ERR(kref));

net/rxrpc/rxperf.c

617

pr_err("Can't link rxperf server key: %d\n", ret);

net/rxrpc/rxperf.c

647

pr_err("Can't allocate rxperf server keyring: %ld\n",

net/rxrpc/rxperf.c

688

pr_err("Failed to register: %d\n", ret);

net/sched/cls_bpf.c

222

pr_err("Stopping hardware offload failed: %d\n", err);

net/sched/em_ipt.c

111

pr_err("Unsupported xt match");

net/sched/em_ipt.c

155

pr_err("unable to load match\n");

net/sched/em_ipt.c

63

pr_err("only policy match revision 0 supported");

net/sched/em_ipt.c

68

pr_err("policy can only be matched on NF_INET_PRE_ROUTING");

net/sched/em_ipt.c

78

pr_err("only addrtype match revision 1 supported");

net/sched/sch_api.c

2502

pr_err("pktsched_init: "

net/sctp/ipv6.c

504

pr_err("%s: Failed to copy ip options\n", __func__);

net/sctp/protocol.c

1445

pr_err("Failed to initialize the SCTP control sock\n");

net/sctp/protocol.c

1543

pr_err("Failed endpoint_hash alloc\n");

net/sctp/protocol.c

1563

pr_err("Failed bind hash alloc\n");

net/sctp/protocol.c

192

pr_err("%s: Failed to copy ip options\n", __func__);

net/sctp/protocol.c

833

pr_err("Failed to create the SCTP control socket\n");

net/sctp/protocol.c

860

pr_err("Failed to create the SCTP UDP tunneling v4 sock\n");

net/sctp/protocol.c

880

pr_err("Failed to create the SCTP UDP tunneling v6 sock\n");

net/sctp/sm_sideeffect.c

1251

pr_err("bug in state %d, event_type %d, event_id %d\n",

net/sctp/sm_sideeffect.c

1257

pr_err("impossible disposition %d in state %d, event_type %d, event_id %d\n",

net/smc/af_smc.c

3491

pr_err("%s: smc_core_init fails with %d\n", __func__, rc);

net/smc/af_smc.c

3497

pr_err("%s: smc_llc_init fails with %d\n", __func__, rc);

net/smc/af_smc.c

3503

pr_err("%s: smc_cdc_init fails with %d\n", __func__, rc);

net/smc/af_smc.c

3509

pr_err("%s: proto_register(v4) fails with %d\n", __func__, rc);

net/smc/af_smc.c

3515

pr_err("%s: proto_register(v6) fails with %d\n", __func__, rc);

net/smc/af_smc.c

3521

pr_err("%s: sock_register fails with %d\n", __func__, rc);

net/smc/af_smc.c

3529

pr_err("%s: ib_register fails with %d\n", __func__, rc);

net/smc/af_smc.c

3534

pr_err("%s: smc_inet_init fails with %d\n", __func__, rc);

net/smc/af_smc.c

3539

pr_err("%s: bpf_smc_hs_ctrl_init fails with %d\n", __func__,

net/smc/smc_inet.c

125

pr_err("%s: proto_register smc_inet_prot fails with %d\n",

net/smc/smc_inet.c

135

pr_err("%s: proto_register smc_inet6_prot fails with %d\n",

net/smc/smc_inet.c

141

pr_err("%s: inet6_register_protosw smc_inet6_protosw fails with %d\n",

net/socket.c

671

pr_err("%s: fasync list not empty!\n", __func__);

net/sunrpc/xprtrdma/frwr_ops.c

180

pr_err("rpcrdma: 'frwr' mode is not supported by device %s\n",

net/sunrpc/xprtrdma/frwr_ops.c

188

pr_err("rpcrdma: HCA provides only %u send SGEs\n", max_sge);

net/sunrpc/xprtrdma/svc_rdma_transport.c

307

pr_err("Listener dead, address change failed for device %s\n",

net/sunrpc/xprtrdma/transport.c

183

pr_err("rpcrdma: Unrecognized address family\n");

net/tipc/bcast.c

410

pr_err("Unable to send SYN: method %d, rc %d\n",

net/tipc/core.c

206

pr_err("Unable to start in single node mode\n");

net/tipc/crypto.c

2313

pr_err("%s: key existed <%p>, gen %d vs %d\n", rx->name,

net/tipc/crypto.c

2321

pr_err("%s: unable to allocate memory for skey\n", rx->name);

net/tipc/crypto.c

766

pr_err("TX: skb_cow_data() returned %d\n", nsg);

net/tipc/crypto.c

782

pr_err("TX: skb_to_sgvec() returned %d, nsg %d!\n", rc, nsg);

net/tipc/crypto.c

905

pr_err("RX: skb_cow_data() returned %d\n", nsg);

net/tipc/crypto.c

920

pr_err("RX: skb_to_sgvec() returned %d, nsg %d\n", rc, nsg);

net/tipc/link.c

750

pr_err("Unknown FSM state %x in %s\n", l->state, l->name);

net/tipc/link.c

755

pr_err("Illegal FSM event %x in state %x on link %s\n",

net/tipc/name_table.c

543

pr_err("Failed to remove unknown binding: %u,%u,%u/%u:%u/%u\n",

net/tipc/netlink.c

306

pr_err("Failed to register netlink interface\n");

net/tipc/netlink_compat.c

1363

pr_err("Failed to register legacy compat interface\n");

net/tipc/node.c

1504

pr_err("Unknown node fsm state %x\n", state);

net/tipc/node.c

1512

pr_err("Illegal node fsm evt %x in state %x\n", evt, state);

net/tipc/socket.c

2279

pr_err("Unknown sk_state %u\n", sk->sk_state);

net/tipc/socket.c

3438

pr_err("Failed to register TIPC protocol type\n");

net/tipc/socket.c

3444

pr_err("Failed to register TIPC socket type\n");

net/tipc/topsrv.c

637

pr_err("can't start tipc receive workqueue\n");

net/tipc/topsrv.c

643

pr_err("can't start tipc send workqueue\n");

net/tipc/udp_media.c

139

pr_err("Invalid UDP media address\n");

net/tipc/udp_media.c

645

pr_err("Can't add remote ip to TIPC UDP multicast bearer\n");

net/tipc/udp_media.c

691

pr_err("Invalid UDP bearer configuration");

net/tipc/udp_media.c

836

pr_err("UDP bearer instance not found\n");

net/vmw_vsock/af_vsock.c

2964

pr_err("Failed to register misc device\n");

net/vmw_vsock/af_vsock.c

2970

pr_err("Cannot register vsock protocol\n");

net/vmw_vsock/af_vsock.c

2976

pr_err("could not register af_vsock (%d) address family: %d\n",

net/vmw_vsock/vmci_transport.c

1248

pr_err("Could not send attach\n");

net/vmw_vsock/vmci_transport.c

2013

pr_err("Can't set both an old and new protocol\n");

net/vmw_vsock/vmci_transport.c

2026

pr_err("Unknown notify protocol version\n");

net/vmw_vsock/vmci_transport.c

2109

pr_err("Unable to create datagram handle. (%d)\n", err);

net/vmw_vsock/vmci_transport.c

2116

pr_err("Unable to subscribe to resumed event. (%d)\n", err);

net/vmw_vsock/vmci_transport.c

2153

pr_err("Couldn't destroy datagram handle\n");

net/vmw_vsock/vmci_transport.c

722

pr_err("unable to send reset\n");

net/vmw_vsock/vmci_transport.c

785

pr_err("unable to send reset\n");

net/vmw_vsock/vmci_transport_notify.c

290

pr_err("%p unable to send read notify to peer\n", sk);

net/vmw_vsock/vmci_transport_notify.c

586

pr_err("%p unable to send wrote notify to peer\n", sk);

net/vmw_vsock/vmci_transport_notify_qstate.c

131

pr_err("%p unable to send read notification to peer\n",

net/vmw_vsock/vmci_transport_notify_qstate.c

333

pr_err("%p unable to send wrote notification to peer\n",

net/wireless/core.c

1519

pr_err("failed to add phy80211 symlink to netdev!\n");

net/wireless/reg.c

3815

pr_err("Invalid regulatory domain detected: %c%c\n",

net/wireless/reg.c

3852

pr_err("Invalid regulatory domain detected: %c%c\n",

net/wireless/reg.c

3916

pr_err("Invalid regulatory domain detected: %c%c\n",

net/wireless/reg.c

4307

pr_err("kobject_uevent_env() was unable to call CRDA during init\n");

net/wireless/reg.c

856

pr_err("Invalid regulatory WMM rule %u-%u in domain %c%c\n",

net/x25/x25_dev.c

156

pr_err("x25_dev: out of memory\n");

net/x25/x25_subr.c

149

pr_err("invalid frame type %02X\n", frametype);

net/xfrm/xfrm_interface_core.c

1221

pr_err("xfrmi init: failed to register %s\n", msg);

net/xfrm/xfrm_nat_keepalive.c

284

pr_err("xfrm nat keepalive init: failed to init err:%d\n", err);

samples/configfs/configfs_sample.c

342

pr_err("Error %d while registering subsystem %s\n",

samples/connector/cn_test.c

55

pr_err("failed to allocate new skb with size=%u\n", size);

samples/damon/mtier.c

63

pr_err("NUMA node %d is not online\n", target_node);

samples/fprobe/fprobe_example.c

136

pr_err("register_fprobe failed, returned %d\n", ret);

samples/kprobes/kprobe_example.c

113

pr_err("register_kprobe failed, returned %d\n", ret);

samples/kprobes/kretprobe_example.c

87

pr_err("register_kretprobe failed, returned %d\n", ret);

samples/livepatch/livepatch-shadow-fix1.c

89

pr_err("%s: failed to allocate shadow variable for the leaking pointer: dummy @ %p, leak @ %p\n",

samples/qmi/qmi_sample_client.c

342

pr_err("spurious ping response\n");

samples/qmi/qmi_sample_client.c

413

pr_err("response data doesn't match expectation\n");

samples/qmi/qmi_sample_client.c

474

pr_err("failed to connect to remote service port\n");

samples/qmi/qmi_sample_client.c

583

pr_err("failed to create qmi_sample dir\n");

samples/tsm-mr/tsm_mr_sample.c

31

pr_err("crypto_alloc_shash failed: %ld\n", PTR_ERR(tfm));

samples/tsm-mr/tsm_mr_sample.c

41

pr_err("crypto_shash_tfm_digest failed: %d\n", rc);

samples/tsm-mr/tsm_mr_sample.c

54

pr_err("crypto_alloc_shash failed: %ld\n", PTR_ERR(desc->tfm));

samples/tsm-mr/tsm_mr_sample.c

65

pr_err("SHA calculation failed: %d\n", rc);

samples/vfio-mdev/mbochs.c

1394

pr_err("Error: failed to register mbochs_dev, err: %d\n", ret);

samples/vfio-mdev/mdpy.c

684

pr_err("Error: failed to register mdpy_dev, err: %d\n", ret);

samples/vfio-mdev/mtty.c

1970

pr_err("Error: failed to register mtty_dev, err:%d\n", ret);

samples/vfio-mdev/mtty.c

1986

pr_err("Error: failed to register mtty_dev class\n");

samples/vfio-mdev/mtty.c

399

pr_err("Serial port %d: Fifo level trigger\n",

samples/vfio-mdev/mtty.c

406

pr_err("Serial port %d: Buffer Overflow\n", index);

samples/vfio-mdev/mtty.c

432

pr_err("Serial port %d: IER_THRI write\n",

samples/vfio-mdev/mtty.c

504

pr_err("Serial port %d: MCR_OUT2 write\n", index);

samples/vfio-mdev/mtty.c

512

pr_err("Serial port %d: MCR RTS/DTR write\n", index);

samples/vfio-mdev/mtty.c

561

pr_err("Serial port %d: Buffer Empty\n", index);

scripts/livepatch/init.c

26

pr_err("nothing to patch!\n");

security/apparmor/match.c

164

pr_err("AppArmor DFA default state out of bounds");

security/apparmor/match.c

168

pr_err("AppArmor DFA state with invalid match flags");

security/apparmor/match.c

173

pr_err("AppArmor DFA diff encoded transition state without header flag");

security/apparmor/match.c

179

pr_err("AppArmor DFA out of bad transition out of range");

security/apparmor/match.c

183

pr_err("AppArmor DFA out of bad transition state without header flag");

security/apparmor/match.c

188

pr_err("AppArmor DFA next/check upper bounds error\n");

security/integrity/digsig.c

183

pr_err("Problem loading X.509 certificate %d\n", rc);

security/integrity/digsig.c

204

pr_err("Unable to open file: %s (%d)", path, rc);

security/integrity/digsig.c

52

pr_err("no %s keyring: %d\n", keyring_name[id], err);

security/integrity/digsig_asymmetric.c

38

pr_err("Key '%s' is in ima_blacklist_keyring\n", name);

security/integrity/evm/evm_crypto.c

105

pr_err("Can not allocate %s (reason: %ld)\n", algo,

security/integrity/evm/evm_crypto.c

70

pr_err("key initialization failed\n");

security/integrity/evm/evm_main.c

81

pr_err("invalid \"%s\" mode", str);

security/integrity/iint.c

55

pr_err("Unable to create integrity sysfs dir: %d\n",

security/integrity/ima/ima_appraise.c

45

pr_err("invalid \"%s\" appraise option", str);

security/integrity/ima/ima_crypto.c

104

pr_err("Can not allocate %s (reason: %d)\n",

security/integrity/ima/ima_crypto.c

300

pr_err("Can not allocate %s (reason: %d)\n",

security/integrity/ima/ima_crypto.c

77

pr_err("Can not allocate %s (reason: %ld)\n",

security/integrity/ima/ima_crypto.c

781

pr_err("Error Communicating to TPM chip\n");

security/integrity/ima/ima_crypto.c

860

pr_err("No suitable TPM algorithm for boot aggregate\n");

security/integrity/ima/ima_fs.c

308

pr_err("Unable to open file: %s (%d)", path, rc);

security/integrity/ima/ima_fs.c

359

pr_err("signed policy file (specified as an absolute pathname) required\n");

security/integrity/ima/ima_kexec.c

171

pr_err("Binary measurement list too large.\n");

security/integrity/ima/ima_kexec.c

177

pr_err("Not enough memory for the kexec measurement buffer.\n");

security/integrity/ima/ima_kexec.c

187

pr_err("Error passing over kexec measurement buffer.\n");

security/integrity/ima/ima_kexec.c

218

pr_err("Kexec buffer not set.\n");

security/integrity/ima/ima_kexec.c

225

pr_err("Dump measurements failed. Error:%d\n", ret);

security/integrity/ima/ima_kexec.c

257

pr_err("Could not map measurements buffer.\n");

security/integrity/ima/ima_kexec.c

284

pr_err("Failed to restore the measurement list: %d\n",

security/integrity/ima/ima_kexec.c

92

pr_err("Kexec file buf not allocated\n");

security/integrity/ima/ima_main.c

1008

pr_err("Prevent firmware loading_store.\n");

security/integrity/ima/ima_main.c

60

pr_err("Invalid ima setup option: \"%s\" , please specify ima=on|off.", str);

security/integrity/ima/ima_main.c

80

pr_err("invalid hash algorithm \"%s\" for template \"%s\"",

security/integrity/ima/ima_main.c

89

pr_err("invalid hash algorithm \"%s\"", str);

security/integrity/ima/ima_main.c

958

pr_err("impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall.\n");

security/integrity/ima/ima_main.c

963

pr_err("impossible to appraise a kernel image without a file descriptor; try using kexec_file_load syscall.\n");

security/integrity/ima/ima_main.c

969

pr_err("Prevent firmware sysfs fallback loading.\n");

security/integrity/ima/ima_main.c

978

pr_err("impossible to appraise a module without a file descriptor. sig_enforce kernel parameter might help\n");

security/integrity/ima/ima_policy.c

1406

pr_err("unknown hash algorithm \"%s\"",

security/integrity/ima/ima_policy.c

1412

pr_err("unavailable hash algorithm \"%s\", check your kernel configuration",

security/integrity/ima/ima_policy.c

303

pr_err("policy \"%s\" not found", p);

security/integrity/ima/ima_policy.c

495

pr_err("lsm rule update error %d\n", result);

security/integrity/ima/ima_queue.c

108

pr_err("OUT OF MEMORY ERROR creating queue entry\n");

security/integrity/ima/ima_queue.c

154

pr_err("Error Communicating to TPM chip, result: %d\n", result);

security/integrity/ima/ima_template.c

121

pr_err("template %s not found, using %s\n",

security/integrity/ima/ima_template.c

132

pr_err("template does not support hash alg\n");

security/integrity/ima/ima_template.c

150

pr_err("format string '%s' not valid, using template %s\n",

security/integrity/ima/ima_template.c

223

pr_err("format string '%s' contains too many fields\n",

security/integrity/ima/ima_template.c

234

pr_err("Invalid field with length %d\n", len);

security/integrity/ima/ima_template.c

242

pr_err("field '%s' not found\n", tmp_field_id);

security/integrity/ima/ima_template.c

302

pr_err("template %s init failed, result: %d\n",

security/integrity/ima/ima_template.c

310

pr_err("Failed to get ima-buf template\n");

security/integrity/ima/ima_template.c

318

pr_err("template %s init failed, result: %d\n",

security/integrity/ima/ima_template.c

332

pr_err("attempting to initialize the template \"%s\" failed\n",

security/integrity/ima/ima_template.c

444

pr_err("attempting to restore a incompatible measurement list");

security/integrity/ima/ima_template.c

449

pr_err("attempting to restore too many measurements");

security/integrity/ima/ima_template.c

473

pr_err("attempting to restore a template name that is too long\n");

security/integrity/ima/ima_template.c

484

pr_err("attempting to restore an unsupported template \"%s\" failed\n",

security/integrity/ima/ima_template.c

505

pr_err("attempting to restore the template fmt \"%s\" failed\n",

security/integrity/ima/ima_template.c

523

pr_err("cannot calculate template digest\n");

security/integrity/ima/ima_template_lib.c

269

pr_err("%s: nr of fields mismatch: expected: %d, current: %d\n",

security/integrity/ima/ima_template_lib.c

275

pr_err("%s: buf end mismatch: expected: %p, current: %p\n",

security/integrity/platform_certs/load_powerpc.c

105

pr_err("Couldn't parse db signatures: %d\n", rc);

security/integrity/platform_certs/load_powerpc.c

114

pr_err("Error reading dbx from firmware: %d\n", rc);

security/integrity/platform_certs/load_powerpc.c

122

pr_err("Couldn't parse dbx signatures: %d\n", rc);

security/integrity/platform_certs/load_powerpc.c

131

pr_err("Error reading trustedcadb from firmware: %d\n", rc);

security/integrity/platform_certs/load_powerpc.c

138

pr_err("Couldn't parse trustedcadb signatures: %d\n", rc);

security/integrity/platform_certs/load_powerpc.c

147

pr_err("Error reading moduledb from firmware: %d\n", rc);

security/integrity/platform_certs/load_powerpc.c

154

pr_err("Couldn't parse moduledb signatures: %d\n", rc);

security/integrity/platform_certs/load_powerpc.c

80

pr_err("Unsupported secvar implementation \"%s\", not loading certs\n", buf);

security/integrity/platform_certs/load_powerpc.c

97

pr_err("Error reading db from firmware: %d\n", rc);

security/integrity/platform_certs/load_uefi.c

130

pr_err("Couldn't parse MokListRT signatures from EFI MOKvar config table: %d\n",

security/integrity/platform_certs/load_uefi.c

143

pr_err("Couldn't parse MokListRT signatures: %d\n", rc);

security/integrity/platform_certs/load_uefi.c

172

pr_err("Reading UEFI Secure Boot Certs is not supported on T2 Macs.\n");

security/integrity/platform_certs/load_uefi.c

188

pr_err("MODSIGN: Couldn't get UEFI db list\n");

security/integrity/platform_certs/load_uefi.c

193

pr_err("Couldn't parse db signatures: %d\n",

security/integrity/platform_certs/load_uefi.c

210

pr_err("Couldn't parse dbx signatures: %d\n", rc);

security/integrity/platform_certs/load_uefi.c

229

pr_err("Couldn't parse mokx signatures %d\n", rc);

security/integrity/platform_certs/load_uefi.c

77

pr_err("Couldn't get size: 0x%lx\n", *status);

security/integrity/platform_certs/load_uefi.c

88

pr_err("Error reading db var: 0x%lx\n", *status);

security/keys/encrypted-keys/encrypted.c

110

pr_err("encrypted_key: key description must be %d hexadecimal "

security/keys/encrypted-keys/encrypted.c

117

pr_err("encrypted_key: key description must contain "

security/keys/encrypted-keys/encrypted.c

192

pr_err("encrypted_key: insufficient parameters specified\n");

security/keys/encrypted-keys/encrypted.c

366

pr_err("encrypted_key: failed to load %s transform (%ld)\n",

security/keys/encrypted-keys/encrypted.c

373

pr_err("encrypted_key: failed to setkey (%d)\n", ret);

security/keys/encrypted-keys/encrypted.c

380

pr_err("encrypted_key: failed to allocate request for %s\n",

security/keys/encrypted-keys/encrypted.c

461

pr_err("encrypted_key: failed to encrypt (%d)\n", ret);

security/keys/encrypted-keys/encrypted.c

600

pr_err("encrypted key: instantiation of keys using provided decrypted data is disabled since CONFIG_USER_DECRYPTED_DATA is set to false\n");

security/keys/encrypted-keys/encrypted.c

604

pr_err("encrypted key: decrypted data provided does not match decrypted data length provided\n");

security/keys/encrypted-keys/encrypted.c

609

pr_err("encrypted key: decrypted data provided must contain only hexadecimal characters\n");

security/keys/encrypted-keys/encrypted.c

618

pr_err("encrypted_key: keylen for the ecryptfs format must be equal to %d bytes\n",

security/keys/encrypted-keys/encrypted.c

626

pr_err("encrypted_key: enc32 key payload incorrect length: %d\n",

security/keys/encrypted-keys/encrypted.c

693

pr_err("encrypted_key: bad hmac (%d)\n", ret);

security/keys/encrypted-keys/encrypted.c

703

pr_err("encrypted_key: failed to decrypt key (%d)\n", ret);

security/keys/encrypted-keys/encrypted.c

88

pr_err("encrypted_key: failed to alloc_cipher (%ld)\n",

security/keys/trusted-keys/trusted_dcp.c

146

pr_err("Can't set crypto auth tag len: %d\n", ret);

security/keys/trusted-keys/trusted_dcp.c

172

pr_err("Can't set crypto AEAD key\n");

security/keys/trusted-keys/trusted_dcp.c

221

pr_err("Unable to encrypt blob payload: %i\n", ret);

security/keys/trusted-keys/trusted_dcp.c

227

pr_err("Unable to encrypt blob key: %i\n", ret);

security/keys/trusted-keys/trusted_dcp.c

249

pr_err("DCP blob has bad version: %i, expected %i\n",

security/keys/trusted-keys/trusted_dcp.c

258

pr_err("DCP blob has bad length: %i != %i\n", blen,

security/keys/trusted-keys/trusted_dcp.c

272

pr_err("Unable to decrypt blob key: %i\n", ret);

security/keys/trusted-keys/trusted_dcp.c

279

pr_err("Unwrap of DCP payload failed: %i\n", ret);

security/keys/trusted-keys/trusted_pkwm.c

102

pr_err("Input buffer allocation failed. Returning -ENOMEM.");

security/keys/trusted-keys/trusted_pkwm.c

118

pr_err("Wrapping of payload key failed: %d\n", rc);

security/keys/trusted-keys/trusted_pkwm.c

139

pr_err("Input buffer allocation failed. Returning -ENOMEM.");

security/keys/trusted-keys/trusted_pkwm.c

152

pr_err("Unwrapping of payload failed: %d\n", rc);

security/keys/trusted-keys/trusted_pkwm.c

166

pr_err("H_PKS_WRAP_OBJECT interface not supported\n");

security/keys/trusted-keys/trusted_pkwm.c

172

pr_err("Failed to generate default wrapping key\n");

security/keys/trusted-keys/trusted_tpm2.c

81

pr_err("BUG: ASN.1 encoder failed with %d\n", ret);

security/loadpin/loadpin.c

412

pr_err("LoadPin: could not create securityfs dir: %ld\n",

security/loadpin/loadpin.c

420

pr_err("LoadPin: could not create securityfs entry 'dm-verity': %ld\n",

security/selinux/hooks.c

150

pr_err("SELinux: checkreqprot set to 1 via kernel parameter. This is no longer supported.\n");

security/selinux/hooks.c

1661

pr_err("SELinux: out of range capability %d\n", cap);

security/selinux/hooks.c

3016

pr_err("SELinux: context_inode is not initialized\n");

security/selinux/hooks.c

3479

pr_err("SELinux: unable to map context to SID"

security/selinux/hooks.c

7265

pr_err("SELinux: out of range capability %d\n", cap);

security/selinux/ima.c

81

pr_err("SELinux: %s: failed to read state.\n", __func__);

security/selinux/ima.c

99

pr_err("SELinux: %s: failed to read policy %d.\n", __func__, rc);

security/selinux/netlink.c

95

pr_err("SELinux: OOM in %s\n", __func__);

security/selinux/selinuxfs.c

1001

pr_err("SELinux: %s: context size (%u) exceeds "

security/selinux/selinuxfs.c

1188

pr_err("SELinux: %s: context size (%u) exceeds "

security/selinux/selinuxfs.c

2068

pr_err("SELinux: failed to load policy capabilities\n");

security/selinux/selinuxfs.c

2074

pr_err("SELinux: %s: failed while creating inodes\n",

security/selinux/selinuxfs.c

2130

pr_err("selinuxfs: could not mount!\n");

security/selinux/selinuxfs.c

2139

pr_err("selinuxfs: could not lookup null!\n");

security/selinux/selinuxfs.c

297

pr_err("SELinux: https://github.com/SELinuxProject/selinux-kernel/wiki/DEPRECATE-runtime-disable\n");

security/selinux/selinuxfs.c

298

pr_err("SELinux: Runtime disable is not supported, use selinux=0 on the kernel cmdline.\n");

security/selinux/selinuxfs.c

666

pr_err("SELinux: %s: context size (%u) exceeds "

security/selinux/selinuxfs.c

723

pr_err("SELinux: %s (%d) set checkreqprot to 1. This is no longer supported.\n",

security/selinux/ss/avtab.c

327

pr_err("SELinux: avtab: truncated entry\n");

security/selinux/ss/avtab.c

332

pr_err("SELinux: avtab: entry overflow\n");

security/selinux/ss/avtab.c

337

pr_err("SELinux: avtab: truncated entry\n");

security/selinux/ss/avtab.c

345

pr_err("SELinux: avtab: truncated source type\n");

security/selinux/ss/avtab.c

351

pr_err("SELinux: avtab: truncated target type\n");

security/selinux/ss/avtab.c

357

pr_err("SELinux: avtab: truncated target class\n");

security/selinux/ss/avtab.c

365

pr_err("SELinux: avtab: null entry\n");

security/selinux/ss/avtab.c

369

pr_err("SELinux: avtab: entry has both access vectors and types\n");

security/selinux/ss/avtab.c

373

pr_err("SELinux: avtab: entry has extended permissions\n");

security/selinux/ss/avtab.c

388

pr_err("SELinux: avtab: entry only had %d items, expected %d\n",

security/selinux/ss/avtab.c

397

pr_err("SELinux: avtab: truncated entry\n");

security/selinux/ss/avtab.c

410

pr_err("SELinux: avtab: invalid type or class\n");

security/selinux/ss/avtab.c

416

pr_err("SELinux: avtab: more than one specifier\n");

security/selinux/ss/avtab.c

422

pr_err("SELinux: avtab: policy version %u does not "

security/selinux/ss/avtab.c

429

pr_err("SELinux: avtab: policy version %u does not "

security/selinux/ss/avtab.c

438

pr_err("SELinux: avtab: truncated entry\n");

security/selinux/ss/avtab.c

443

pr_err("SELinux: avtab: truncated entry\n");

security/selinux/ss/avtab.c

449

pr_err("SELinux: avtab: truncated entry\n");

security/selinux/ss/avtab.c

458

pr_err("SELinux: avtab: truncated entry\n");

security/selinux/ss/avtab.c

465

pr_err("SELinux: avtab: invalid type\n");

security/selinux/ss/avtab.c

485

pr_err("SELinux: avtab: truncated table\n");

security/selinux/ss/avtab.c

490

pr_err("SELinux: avtab: table is empty\n");

security/selinux/ss/avtab.c

503

pr_err("SELinux: avtab: out of memory\n");

security/selinux/ss/avtab.c

505

pr_err("SELinux: avtab: duplicate entry\n");

security/selinux/ss/conditional.c

101

pr_err("SELinux: expression result was undefined - disabling all rules.\n");

security/selinux/ss/conditional.c

271

pr_err("SELinux: type rule already exists outside of a conditional.\n");

security/selinux/ss/conditional.c

287

pr_err("SELinux: too many conflicting type rules.\n");

security/selinux/ss/conditional.c

298

pr_err("SELinux: conflicting type rules.\n");

security/selinux/ss/conditional.c

304

pr_err("SELinux: conflicting type rules when adding type rule for true.\n");

security/selinux/ss/conditional.c

312

pr_err("SELinux: could not insert rule.\n");

security/selinux/ss/conditional.c

361

pr_err("SELinux: conditional expressions uses unknown operator.\n");

security/selinux/ss/conditional.c

366

pr_err("SELinux: conditional expressions uses unknown bool.\n");

security/selinux/ss/ebitmap.c

384

pr_err("SELinux: ebitmap: map size %u does not "

security/selinux/ss/ebitmap.c

405

pr_err("SELinux: ebitmap: truncated map\n");

security/selinux/ss/ebitmap.c

411

pr_err("SELinux: ebitmap start bit (%u) is "

security/selinux/ss/ebitmap.c

417

pr_err("SELinux: ebitmap start bit (%u) is "

security/selinux/ss/ebitmap.c

428

pr_err("SELinux: ebitmap: out of memory\n");

security/selinux/ss/ebitmap.c

440

pr_err("SELinux: ebitmap: start bit %u"

security/selinux/ss/ebitmap.c

448

pr_err("SELinux: ebitmap: truncated map\n");

security/selinux/ss/ebitmap.c

453

pr_err("SELinux: ebitmap: empty map\n");

security/selinux/ss/ebitmap.c

465

pr_err("SELinux: ebitmap: high bit %u is not equal to the expected value %zu\n",

security/selinux/ss/policydb.c

1017

pr_err("SELinux: mls: range overflow\n");

security/selinux/ss/policydb.c

1023

pr_err("SELinux: mls: truncated range\n");

security/selinux/ss/policydb.c

1035

pr_err("SELinux: mls: error reading low categories\n");

security/selinux/ss/policydb.c

1041

pr_err("SELinux: mls: error reading high categories\n");

security/selinux/ss/policydb.c

1047

pr_err("SELinux: mls: out of memory\n");

security/selinux/ss/policydb.c

1071

pr_err("SELinux: context truncated\n");

security/selinux/ss/policydb.c

1080

pr_err("SELinux: error reading MLS range of context\n");

security/selinux/ss/policydb.c

1087

pr_err("SELinux: invalid security context\n");

security/selinux/ss/policydb.c

1362

pr_err("SELinux: unknown common %s\n",

security/selinux/ss/policydb.c

1458

pr_err("SELinux: Role %s has wrong value %d\n",

security/selinux/ss/policydb.c

1536

pr_err("SELinux: mls: truncated level\n");

security/selinux/ss/policydb.c

1543

pr_err("SELinux: mls: error reading level categories\n");

security/selinux/ss/policydb.c

1695

pr_err("SELinux: user %s: "

security/selinux/ss/policydb.c

1707

pr_err("SELinux: boundary violated policy: "

security/selinux/ss/policydb.c

1732

pr_err("SELinux: role %s: "

security/selinux/ss/policydb.c

1744

pr_err("SELinux: boundary violated policy: "

security/selinux/ss/policydb.c

1766

pr_err("SELinux: type %s: "

security/selinux/ss/policydb.c

1776

pr_err("SELinux: type %s: "

security/selinux/ss/policydb.c

2032

pr_err("SELinux: Filename transition key with no datum\n");

security/selinux/ss/policydb.c

2073

pr_err("SELinux: Duplicate filename transition key\n");

security/selinux/ss/policydb.c

2167

pr_err("SELinux: dup genfs fstype %s\n",

security/selinux/ss/policydb.c

2217

pr_err("SELinux: dup genfs entry (%s,%s)\n",

security/selinux/ss/policydb.c

2465

pr_err("SELinux: policydb magic number 0x%x does "

security/selinux/ss/policydb.c

2474

pr_err("SELinux: policydb string length %d does not "

security/selinux/ss/policydb.c

2483

pr_err("SELinux: unable to allocate memory for policydb string of length %d\n",

security/selinux/ss/policydb.c

2486

pr_err("SELinux: truncated policydb string identifier\n");

security/selinux/ss/policydb.c

2493

pr_err("SELinux: policydb string %s does not match "

security/selinux/ss/policydb.c

2512

pr_err("SELinux: policydb version %d does not match "

security/selinux/ss/policydb.c

2524

pr_err("SELinux: security policydb version %d "

security/selinux/ss/policydb.c

2554

pr_err("SELinux: unable to find policy compat info "

security/selinux/ss/policydb.c

2563

pr_err("SELinux: policydb table sizes (%d,%d) do "

security/selinux/ss/policydb.c

2599

pr_err("SELinux: process class is required, not defined in policy\n");

security/selinux/ss/policydb.c

2702

pr_err("SELinux: process transition permission is required, not defined in policy\n");

security/selinux/ss/policydb.c

2708

pr_err("SELinux: process dyntransition permission is required, not defined in policy\n");

security/selinux/ss/policydb.c

3680

pr_err("SELinux: refusing to write policy version %d."

security/selinux/ss/policydb.c

3709

pr_err("SELinux: compatibility lookup failed for policy "

security/selinux/ss/policydb.c

875

pr_err("SELinux: out of memory on SID table init\n");

security/selinux/ss/policydb.c

888

pr_err("SELinux: SID 0 was assigned a context.\n");

security/selinux/ss/policydb.c

906

pr_err("SELinux: unable to load initial SID %s.\n",

security/selinux/ss/policydb.c

924

pr_err("SELinux: unable to load initial SID %s.\n",

security/selinux/ss/services.c

1061

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

1068

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

1147

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

1166

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

1212

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

1231

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

1336

pr_err("SELinux: %s: called before initial load_policy\n",

security/selinux/ss/services.c

1397

pr_err("SELinux: %s: called before initial "

security/selinux/ss/services.c

1411

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

1807

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

1814

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

2091

pr_err("SELinux: Unable to map context %s, rc = %d.\n",

security/selinux/ss/services.c

2140

pr_err("SELinux: unable to look up"

security/selinux/ss/services.c

2337

pr_err("SELinux: unable to load the initial SIDs\n");

security/selinux/ss/services.c

2354

pr_err("SELinux: unable to preserve booleans\n");

security/selinux/ss/services.c

2377

pr_err("SELinux: unable to convert the internal"

security/selinux/ss/services.c

3262

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

3270

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

3386

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

3393

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

3479

pr_err("SELinux: %s: unrecognized class %s\n",

security/selinux/ss/services.c

793

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

801

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

809

pr_err("SELinux: %s: unrecognized SID %d\n",

security/selinux/ss/services.c

882

pr_err("SELinux: %s: unrecognized SID %u\n",

security/selinux/ss/services.c

890

pr_err("SELinux: %s: unrecognized SID %u\n",

security/tomoyo/common.c

2932

pr_err("Profile version %u is not supported.\n",

security/tomoyo/common.c

2935

pr_err("Profile %u (used by '%s') is not defined.\n",

security/tomoyo/common.c

2939

pr_err("Userland tools for TOMOYO 2.6 must be installed and policy must be initialized.\n");

security/tomoyo/common.c

2940

pr_err("Please see https://tomoyo.sourceforge.net/2.6/ for more information.\n");

sound/core/compress_offload.c

107

pr_err("no device data!!!\n");

sound/core/compress_offload.c

112

pr_err("this device doesn't support this direction\n");

sound/core/compress_offload.c

1415

pr_err("snd_register_device failed %d\n", ret);

sound/core/isadma.c

92

pr_err("ALSA: pointer (0x%x) for DMA #%ld is greater than transfer size (0x%x)\n", result, dma, size);

sound/core/oss/mixer_oss.c

1163

pr_err("ALSA: mixer_oss: invalid OSS volume '%s'\n",

sound/core/oss/mixer_oss.c

1177

pr_err("ALSA: mixer_oss: invalid index %d\n", idx);

sound/core/oss/pcm_oss.c

3204

pr_err("ALSA: pcm_oss: invalid dsp_map[%d] = %d\n",

sound/core/oss/pcm_oss.c

3209

pr_err("ALSA: pcm_oss: invalid adsp_map[%d] = %d\n",

sound/core/rawmidi.c

2115

pr_err("ALSA: rawmidi: invalid midi_map[%d] = %d\n",

sound/core/rawmidi.c

2120

pr_err("ALSA: rawmidi: invalid amidi_map[%d] = %d\n",

sound/core/seq/oss/seq_oss.c

232

pr_err("ALSA: seq_oss: can't register device seq\n");

sound/core/seq/oss/seq_oss.c

239

pr_err("ALSA: seq_oss: can't register device music\n");

sound/core/seq/oss/seq_oss.c

251

pr_err("ALSA: seq_oss: error unregister device music\n");

sound/core/seq/oss/seq_oss.c

253

pr_err("ALSA: seq_oss: error unregister device seq\n");

sound/core/seq/oss/seq_oss_init.c

204

pr_err("ALSA: seq_oss: can't create port\n");

sound/core/seq/oss/seq_oss_init.c

245

pr_err("ALSA: seq_oss: can't alloc timer\n");

sound/core/seq/oss/seq_oss_init.c

373

pr_err("ALSA: seq_oss: unable to delete queue %d (%d)\n", queue, rc);

sound/core/seq/oss/seq_oss_midi.c

173

pr_err("ALSA: seq_oss: can't malloc midi coder\n");

sound/core/seq/oss/seq_oss_synth.c

112

pr_err("ALSA: seq_oss: no more synth slot\n");

sound/core/seq/oss/seq_oss_synth.c

142

pr_err("ALSA: seq_oss: can't unregister synth\n");

sound/core/seq/seq_clientmgr.c

281

pr_err("ALSA: seq: Trying to free client %d with undefined type = %d\n",

sound/core/seq/seq_dummy.c

167

pr_err("ALSA: seq_dummy: invalid number of ports %d\n", ports);

sound/core/seq/seq_midi.c

108

pr_err("ALSA: seq_midi: MIDI output buffer overrun\n");

sound/core/seq/seq_prioq.c

180

pr_err("ALSA: seq: cannot find a pointer.. infinite loop?\n");

sound/core/seq/seq_timer.c

280

pr_err("ALSA: seq fatal error: cannot create timer (%i)\n", err);

sound/core/seq/seq_virmidi.c

446

pr_err("ALSA: seq_virmidi: seq_mode is not set: %d\n", rdev->seq_mode);

sound/core/sound.c

394

pr_err("ALSA core: unable to register native major device number %d\n", major);

sound/core/timer.c

2158

pr_err("Can't create userspace-driven timer\n");

sound/core/timer.c

2172

pr_err("Can't register a userspace-driven timer\n");

sound/core/timer.c

2483

pr_err("ALSA: unable to register system timer (%i)\n", err);

sound/core/timer.c

2490

pr_err("ALSA: unable to register timer device (%i)\n", err);

sound/core/vmaster.c

99

pr_err("ALSA: vmaster: invalid follower element\n");

sound/drivers/aloop.c

1894

pr_err("aloop: No loopback enabled\n");

sound/drivers/dummy.c

1162

pr_err("Dummy soundcard not found or device busy\n");

sound/drivers/mpu401/mpu401.c

237

pr_err("MPU-401 device not found or device busy\n");

sound/drivers/serial-u16550.c

961

pr_err("serial midi soundcard not found or device busy\n");

sound/drivers/virmidi.c

158

pr_err("Card-VirMIDI soundcard not found or device busy\n");

sound/hda/core/intel-sdw-acpi.c

146

pr_err("%s: Couldn't find ACPI handle\n", __func__);

sound/isa/ad1816a/ad1816a.c

255

pr_err("no AD1816A based soundcards found.\n");

sound/isa/als100.c

325

pr_err("no Avance Logic based soundcards found\n");

sound/isa/azt2320.c

304

pr_err("no AZT2320 based soundcards found\n");

sound/isa/gus/gus_mem.c

181

pr_err("%s - share: sizes differ\n", __func__);

sound/isa/gus/gus_volume.c

193

pr_err("patch: (1) fc frequency overflow - %u\n", fc);

sound/isa/gus/gus_volume.c

200

pr_err("patch: (2) fc frequency overflow - %u\n", fc);

sound/oss/dmasound/dmasound_q40.c

431

pr_err("Couldn't register sound interrupt\n");

sound/pci/asihpi/hpioctl.c

317

pr_err("asihpi_isr ASI%04X:%d no handler\n", a->adapter->type,

sound/pci/au88x0/au88x0_core.c

536

pr_err( "Vortex: could not set src-%d from %d to %d\n",

sound/pci/aw2/aw2-saa7146.c

194

pr_err("aw2: snd_aw2_saa7146_pcm_init_playback: "

sound/pci/aw2/aw2-saa7146.c

240

pr_err("aw2: snd_aw2_saa7146_pcm_init_capture: "

sound/pci/ca0106/ca_midi.c

34

pr_err("ca_midi_clear_rx: timeout (status = 0x%x)\n",

sound/pci/ca0106/ca_midi.c

97

pr_err("ca_midi_cmd: 0x%x failed at 0x%x (status = 0x%x, data = 0x%x)!!!\n",

sound/pci/ctxfi/ctdaio.c

116

pr_err("ctxfi: Invalid type %d for hw20k1\n", type);

sound/pci/ctxfi/ctdaio.c

132

pr_err("ctxfi: Invalid type %d for hw20k2\n", type);

sound/pci/ctxfi/ctdaio.c

136

pr_err("ctxfi: Invalid chip type %d\n", hw->chip_type);

sound/soc/amd/acp-pcm-dma.c

195

pr_err("Failed to clear reset of channel : %d\n", ch_num);

sound/soc/amd/acp-pcm-dma.c

496

pr_err("Failed to stop ACP DMA channel : %d\n", ch_num);

sound/soc/amd/acp-pcm-dma.c

544

pr_err("ACP SRAM bank %d state change failed\n", bank);

sound/soc/amd/acp-pcm-dma.c

570

pr_err("Failed to reset ACP\n");

sound/soc/amd/acp-pcm-dma.c

588

pr_err("Failed to reset ACP\n");

sound/soc/amd/acp-pcm-dma.c

664

pr_err("Failed to reset ACP\n");

sound/soc/amd/acp-pcm-dma.c

681

pr_err("Failed to reset ACP\n");

sound/soc/amd/acp/acp-legacy-common.c

337

pr_err("Invalid dai id %x\n", stream->dai_id);

sound/soc/amd/acp/acp-legacy-common.c

357

pr_err("Invalid dai id %x\n", stream->dai_id);

sound/soc/amd/acp/acp-legacy-common.c

434

pr_err("ACP power on failed\n");

sound/soc/amd/acp/acp-legacy-common.c

442

pr_err("ACP reset failed\n");

sound/soc/amd/raven/acp3x-pcm-dma.c

286

pr_err("pinfo failed\n");

sound/soc/amd/raven/pci-acp3x.c

100

pr_err("ACP3x power on failed\n");

sound/soc/amd/raven/pci-acp3x.c

106

pr_err("ACP3x reset failed\n");

sound/soc/amd/raven/pci-acp3x.c

121

pr_err("ACP3x reset failed\n");

sound/soc/amd/renoir/rn-pci-acp3x.c

127

pr_err("ACP power on failed\n");

sound/soc/amd/renoir/rn-pci-acp3x.c

134

pr_err("ACP reset failed\n");

sound/soc/amd/renoir/rn-pci-acp3x.c

150

pr_err("ACP reset failed\n");

sound/soc/amd/renoir/rn-pci-acp3x.c

159

pr_err("ACP power off failed\n");

sound/soc/amd/rpl/rpl-pci-acp6x.c

74

pr_err("ACP power on failed\n");

sound/soc/amd/rpl/rpl-pci-acp6x.c

81

pr_err("ACP reset failed\n");

sound/soc/amd/rpl/rpl-pci-acp6x.c

95

pr_err("ACP reset failed\n");

sound/soc/amd/vangogh/pci-acp5x.c

100

pr_err("ACP5x reset failed\n");

sound/soc/amd/vangogh/pci-acp5x.c

116

pr_err("ACP5x reset failed\n");

sound/soc/amd/vangogh/pci-acp5x.c

93

pr_err("ACP5x power on failed\n");

sound/soc/amd/yc/pci-acp6x.c

115

pr_err("ACP reset failed\n");

sound/soc/amd/yc/pci-acp6x.c

92

pr_err("ACP power on failed\n");

sound/soc/amd/yc/pci-acp6x.c

99

pr_err("ACP reset failed\n");

sound/soc/atmel/atmel-pcm-dma.c

90

pr_err("atmel-pcm: hwparams to dma slave configure failed\n");

sound/soc/atmel/atmel_ssc_dai.c

901

pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n",

sound/soc/atmel/atmel_wm8904.c

35

pr_err("%s - failed to set wm8904 codec PLL.", __func__);

sound/soc/atmel/atmel_wm8904.c

47

pr_err("%s -failed to set wm8904 SYSCLK\n", __func__);

sound/soc/codecs/ab8500-codec.c

2466

pr_err("%s: Failed to setup mics (%d)!\n", __func__, status);

sound/soc/codecs/ab8500-codec.c

2471

pr_err("%s: Failed to set earpiece CM-voltage (%d)!\n",

sound/soc/codecs/aw88395/aw88395_device.c

1543

pr_err("aw_dev is NULL or aw_cfg is NULL");

sound/soc/codecs/cs35l34.c

1202

pr_err("Failed to register CS35l34 I2C driver: %d\n", ret);

sound/soc/codecs/cs35l34.c

262

pr_err("Invalid event = 0x%x\n", event);

sound/soc/codecs/cs35l34.c

359

pr_err("Invalid event = 0x%x\n", event);

sound/soc/codecs/cs35l34.c

390

pr_err("%s regmap read failure %d\n", __func__, ret);

sound/soc/codecs/cs35l34.c

402

pr_err("%s regmap read failure %d\n",

sound/soc/codecs/cs35l34.c

412

pr_err("%s Device did not power down properly\n",

sound/soc/codecs/cs35l34.c

416

pr_err("Invalid event = 0x%x\n", event);

sound/soc/codecs/cs42l73.c

499

pr_err("Invalid event = 0x%x\n", event);

sound/soc/codecs/cs42l73.c

516

pr_err("Invalid event = 0x%x\n", event);

sound/soc/codecs/cs42l73.c

534

pr_err("Invalid event = 0x%x\n", event);

sound/soc/codecs/da732x.c

211

pr_err("Wrong charge pump state\n");

sound/soc/codecs/fs210x.c

1017

pr_err("scene_effect_put: fs210x is null\n");

sound/soc/codecs/fs210x.c

699

pr_err("dai_startup: fs210x is null\n");

sound/soc/codecs/fs210x.c

923

pr_err("fs210x: kcontrol is null\n");

sound/soc/codecs/fs210x.c

929

pr_err("fs210x: component is null\n");

sound/soc/codecs/fs210x.c

949

pr_err("scene_effect_info: fs210x is null\n");

sound/soc/codecs/fs210x.c

985

pr_err("scene_effect_get: fs210x is null\n");

sound/soc/codecs/max98925.c

448

pr_err("%s: format unsupported %d",

sound/soc/codecs/rt-sdw-common.c

39

pr_err("Failed to set value: %06x <= %04x ret=%d\n",

sound/soc/codecs/rt-sdw-common.c

65

pr_err("Failed to get value: %06x => %04x ret=%d\n",

sound/soc/codecs/rt1305.c

1100

pr_err("R0 calibration failed\n");

sound/soc/codecs/rt5665.c

4601

pr_err("HP Calibration Failure\n");

sound/soc/codecs/rt5665.c

4620

pr_err("MONO Calibration Failure\n");

sound/soc/codecs/rt5668.c

1092

pr_err("sysclk rate %d is too low\n",

sound/soc/codecs/rt5668.c

1102

pr_err("can't find div for sysclk %d\n",

sound/soc/codecs/rt5668.c

1109

pr_err("sysclk rate %d is too high\n",

sound/soc/codecs/rt5668.c

2398

pr_err("HP Calibration Failure\n");

sound/soc/codecs/rt5668.c

2469

pr_err("Device with ID register %x is not rt5668\n", val);

sound/soc/codecs/rt700.c

40

pr_err("%s: Failed to set private value: %06x <= %04x ret=%d\n",

sound/soc/codecs/rt700.c

55

pr_err("%s: Failed to get private value: %06x => %04x ret=%d\n",

sound/soc/codecs/rt711.c

113

pr_err("%s, calibration time-out!\n",

sound/soc/codecs/rt711.c

40

pr_err("%s: Failed to set private value: %06x <= %04x ret=%d\n",

sound/soc/codecs/rt711.c

55

pr_err("%s: Failed to get private value: %06x => %04x ret=%d\n",

sound/soc/codecs/rt715.c

113

pr_err("Failed to get R channel gain.\n");

sound/soc/codecs/rt715.c

120

pr_err("Failed to get L channel gain.\n");

sound/soc/codecs/rt715.c

43

pr_err("%s: Failed to set private value: %08x <= %04x %d\n",

sound/soc/codecs/rt715.c

58

pr_err("%s: Failed to set private value: %06x <= %04x ret=%d\n",

sound/soc/codecs/rt715.c

73

pr_err("%s: Failed to get private value: %06x => %04x ret=%d\n",

sound/soc/codecs/wm2200.c

1863

pr_err("Can't scale %dMHz input down to <=13.5MHz\n",

sound/soc/codecs/wm2200.c

1879

pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",

sound/soc/codecs/wm2200.c

1898

pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);

sound/soc/codecs/wm5100.c

1696

pr_err("Can't scale %dMHz input down to <=13.5MHz\n",

sound/soc/codecs/wm5100.c

1712

pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",

sound/soc/codecs/wm5100.c

1731

pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);

sound/soc/codecs/wm8741.c

681

pr_err("Failed to register WM8741 I2C driver: %d\n", ret);

sound/soc/codecs/wm8804.c

366

pr_err("%s: Unable to scale output frequency: %uHz\n",

sound/soc/codecs/wm8804.c

380

pr_err("%s: WM8804 N value is not within the recommended range: %lu\n",

sound/soc/codecs/wm8904.c

1662

pr_err("Can't scale %dMHz input down to <=13.5MHz\n",

sound/soc/codecs/wm8904.c

1678

pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",

sound/soc/codecs/wm8904.c

1697

pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);

sound/soc/codecs/wm8960.c

1185

pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv);

sound/soc/codecs/wm8962.c

2859

pr_err("Can't scale %dMHz input down to <=13.5MHz\n",

sound/soc/codecs/wm8962.c

2875

pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",

sound/soc/codecs/wm8962.c

2894

pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);

sound/soc/codecs/wm8993.c

398

pr_err("Can't scale %dMHz input down to <=13.5MHz\n",

sound/soc/codecs/wm8993.c

416

pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",

sound/soc/codecs/wm8993.c

434

pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);

sound/soc/codecs/wm8996.c

1931

pr_err("Can't scale %dMHz input down to <=13.5MHz\n",

sound/soc/codecs/wm8996.c

1957

pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",

sound/soc/codecs/wm8996.c

1976

pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);

sound/soc/codecs/wm9081.c

476

pr_err("Can't scale %dMHz input down to <=13.5MHz\n",

sound/soc/codecs/wm9081.c

495

pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",

sound/soc/codecs/wm9081.c

513

pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);

sound/soc/fsl/efika-audio-fabric.c

74

pr_err("efika_fabric_init: platform_device_alloc() failed\n");

sound/soc/fsl/efika-audio-fabric.c

82

pr_err("efika_fabric_init: platform_device_add() failed\n");

sound/soc/fsl/fsl_ssi.c

1225

pr_err("ac97 write clk_prepare_enable failed: %d\n",

sound/soc/fsl/fsl_ssi.c

1259

pr_err("ac97 read clk_prepare_enable failed: %d\n", ret);

sound/soc/fsl/mpc5200_psc_ac97.c

40

pr_err("timeout on ac97 bus (rdy)\n");

sound/soc/fsl/mpc5200_psc_ac97.c

55

pr_err("timeout on ac97 read (val) %x\n",

sound/soc/fsl/mpc5200_psc_ac97.c

63

pr_err("reg echo error on ac97 read\n");

sound/soc/fsl/mpc5200_psc_ac97.c

84

pr_err("timeout on ac97 bus (write)\n");

sound/soc/fsl/mpc5200_psc_i2s.c

172

pr_err("Failed to register DAI\n");

sound/soc/fsl/p1022_ds.c

434

pr_err("snd-soc-p1022ds: missing/invalid global utils node\n");

sound/soc/fsl/p1022_rdk.c

398

pr_err("snd-soc-p1022rdk: missing/invalid global utils node\n");

sound/soc/intel/atom/sst-mfld-platform-compress.c

135

pr_err("Undefined format%d\n", params->codec.format);

sound/soc/intel/atom/sst-mfld-platform-compress.c

144

pr_err("codec not supported, id =%d\n", params->codec.id);

sound/soc/intel/atom/sst-mfld-platform-compress.c

162

pr_err("stream allocation failed %d\n", retval);

sound/soc/intel/atom/sst-mfld-platform-compress.c

58

pr_err("no device available to run\n");

sound/soc/loongson/loongson1_ac97.c

124

pr_err("timeout on AC97 write! %d\n", ret);

sound/soc/loongson/loongson1_ac97.c

138

pr_err("timeout on AC97 read! %d\n", ret);

sound/soc/meson/axg-tdm-formatter.c

166

pr_err("failed to enable formatter\n");

sound/soc/meson/axg-tdm-formatter.c

340

pr_err("failed to start tdm stream\n");

sound/soc/meson/axg-tdm-formatter.c

67

pr_err("channel mask error\n");

sound/soc/meson/axg-tdmin.c

129

pr_err("Unsupported format: %u\n",

sound/soc/meson/axg-tdmout.c

127

pr_err("Unsupported format: %u\n",

sound/soc/meson/axg-tdmout.c

163

pr_err("Unsupported physical width: %u\n",

sound/soc/qcom/apq8096.c

43

pr_err("failed to get codec chan map, err:%d\n", ret);

sound/soc/qcom/apq8096.c

56

pr_err("Failed to set cpu chan map, err:%d\n", ret);

sound/soc/qcom/lpass-platform.c

1030

pr_err("error reading from irqstat reg: %d\n", rv);

sound/soc/qcom/lpass-platform.c

1058

pr_err("error reading from irqstat reg: %d\n", rv);

sound/soc/qcom/qdsp6/q6afe-dai.c

461

pr_err("%s: tx slot not found\n", __func__);

sound/soc/qcom/qdsp6/q6afe-dai.c

473

pr_err("%s: rx slot not found\n", __func__);

sound/soc/qcom/qdsp6/q6afe-dai.c

59

pr_err("%s: format %d\n",

sound/soc/qcom/qdsp6/q6asm.c

1439

pr_err("read op[0x%x]rc[%d]\n", pkt->hdr.opcode, rc);

sound/soc/qcom/qdsp6/q6asm.c

1477

pr_err("Invalid format[%d]\n", format);

sound/soc/qcom/qdsp6/q6routing.c

371

pr_err("Routing driver not yet ready\n");

sound/soc/qcom/sdm845.c

217

pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);

sound/soc/qcom/sdm845.c

415

pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);

sound/soc/qcom/sdm845.c

463

pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);

sound/soc/qcom/sdm845.c

73

pr_err("failed to get codec chan map, err:%d\n", ret);

sound/soc/samsung/aries_wm8994.c

111

pr_err("%s failed to enable micbias: %d", __func__, ret);

sound/soc/samsung/aries_wm8994.c

118

pr_err("%s failed to read ADC, assuming headphones", __func__);

sound/soc/samsung/aries_wm8994.c

129

pr_err("%s failed disable micbias: %d", __func__, ret);

sound/soc/samsung/bells.c

118

pr_err("Failed to stop FLL: %d\n", ret);

sound/soc/samsung/bells.c

126

pr_err("Failed to stop FLL: %d\n", ret);

sound/soc/samsung/bells.c

78

pr_err("Failed to start FLL: %d\n", ret);

sound/soc/samsung/bells.c

86

pr_err("Failed to start FLL: %d\n", ret);

sound/soc/samsung/idma.c

299

pr_err("fail to claim i2s irq , ret = %d\n", ret);

sound/soc/samsung/idma.c

320

pr_err("idma_close called with prtd == NULL\n");

sound/soc/samsung/littlemill.c

114

pr_err("Failed to start FLL: %d\n", ret);

sound/soc/samsung/littlemill.c

123

pr_err("Failed to set SYSCLK: %d\n", ret);

sound/soc/samsung/littlemill.c

190

pr_err("Failed to start FLL: %d\n", ret);

sound/soc/samsung/littlemill.c

198

pr_err("Failed to set SYSCLK: %d\n", ret);

sound/soc/samsung/littlemill.c

206

pr_err("Failed to switch away from FLL2: %d\n", ret);

sound/soc/samsung/littlemill.c

213

pr_err("Failed to stop FLL2: %d\n", ret);

sound/soc/samsung/littlemill.c

41

pr_err("Failed to start FLL: %d\n", ret);

sound/soc/samsung/littlemill.c

50

pr_err("Failed to set SYSCLK: %d\n", ret);

sound/soc/samsung/littlemill.c

82

pr_err("Failed to switch away from FLL1: %d\n", ret);

sound/soc/samsung/littlemill.c

89

pr_err("Failed to stop FLL1: %d\n", ret);

sound/soc/samsung/lowland.c

45

pr_err("Failed to set SYSCLK clock source: %d\n", ret);

sound/soc/samsung/lowland.c

53

pr_err("Failed to set OPCLK rate: %d\n", ret);

sound/soc/samsung/midas_wm1811.c

110

pr_err("%s: Failed to disable headset mic bias regulator (%d)\n",

sound/soc/samsung/midas_wm1811.c

132

pr_err("%s: Failed to read ADC (%d), can't detect key type\n",

sound/soc/samsung/midas_wm1811.c

87

pr_err("%s: Failed to enable headset mic bias regulator (%d), assuming headphones\n",

sound/soc/samsung/midas_wm1811.c

98

pr_err("%s: Failed to read ADC (%d), assuming headphones\n",

sound/soc/samsung/speyside.c

43

pr_err("Failed to stop FLL\n");

sound/soc/samsung/speyside.c

76

pr_err("Failed to start FLL\n");

sound/soc/samsung/tobermory.c

37

pr_err("Failed to start FLL: %d\n", ret);

sound/soc/samsung/tobermory.c

44

pr_err("Failed to set SYSCLK: %d\n", ret);

sound/soc/samsung/tobermory.c

78

pr_err("Failed to switch away from FLL: %d\n", ret);

sound/soc/samsung/tobermory.c

85

pr_err("Failed to stop FLL: %d\n", ret);

sound/soc/soc-core.c

2988

pr_err("card->dev is not set before calling %s\n", __func__);

sound/soc/ti/davinci-mcasp.c

2369

pr_err("%s: Only one serializer allowed!\n",

sound/soc/ti/davinci-mcasp.c

2392

pr_err("%s: Only one serializer allowed!\n",

sound/soc/ti/omap-abe-twl6040.c

330

pr_err("%s: dmic-codec device registration failed\n", __func__);

sound/soc/ti/omap-abe-twl6040.c

336

pr_err("%s: platform driver registration failed\n", __func__);

sound/soc/ti/omap3pandora.c

235

pr_err(PREFIX "Platform device allocation failed\n");

sound/soc/ti/omap3pandora.c

243

pr_err(PREFIX "Unable to add platform device\n");

sound/soc/ti/omap3pandora.c

263

pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n",

sound/soc/ti/omap3pandora.c

42

pr_err(PREFIX "can't set codec system clock\n");

sound/soc/ti/omap3pandora.c

51

pr_err(PREFIX "can't set cpu system clock\n");

sound/soc/ti/omap3pandora.c

57

pr_err(PREFIX "can't set SRG clock divider\n");

sound/soc/ux500/mop500_ab8500.c

404

pr_err("%s: Failed to add machine-controls (%d)!\n",

sound/usb/stream.c

471

pr_err("%s: channel number mismatch\n", __func__);

sound/xen/xen_snd_front.c

336

pr_err("Backend state is %s while removing driver\n",

sound/xen/xen_snd_front.c

367

pr_err(XENSND_DRIVER_NAME ": different kernel and Xen page sizes are not supported: XEN_PAGE_SIZE (%lu) != PAGE_SIZE (%lu)\n",

tools/bootconfig/main.c

180

pr_err("%s: %d\n", msg, err);

tools/bootconfig/main.c

222

pr_err("bootconfig size is too big\n");

tools/bootconfig/main.c

237

pr_err("checksum error: %u != %u\n", csum, rcsum);

tools/bootconfig/main.c

244

pr_err("parse error: %s.\n", msg);

tools/bootconfig/main.c

256

pr_err("Error: %s.\n", msg);

tools/bootconfig/main.c

268

pr_err("Parse Error: %s at %d:%d\n", msg, lin, col);

tools/bootconfig/main.c

298

pr_err("Failed to stat %s: %d\n", path, ret);

tools/bootconfig/main.c

305

pr_err("Failed to open initrd %s: %d\n", path, ret);

tools/bootconfig/main.c

312

pr_err("Failed to load a boot config from initrd: %d\n", ret);

tools/bootconfig/main.c

319

pr_err("Failed to load a boot config: %d\n", ret);

tools/bootconfig/main.c

345

pr_err("Failed to open initrd %s: %d\n", path, ret);

tools/bootconfig/main.c

352

pr_err("Failed to load a boot config from initrd: %d\n", ret);

tools/bootconfig/main.c

385

pr_err("Failed to load %s : %d\n", xbc_path, ret);

tools/bootconfig/main.c

419

pr_err("Failed to delete previous boot config: %d\n", ret);

tools/bootconfig/main.c

428

pr_err("Failed to open %s: %d\n", path, ret);

tools/bootconfig/main.c

435

pr_err("Failed to get the size of %s\n", path);

tools/bootconfig/main.c

457

pr_err("Failed to apply a boot config: %d\n", ret);

tools/bootconfig/main.c

475

pr_err("Failed to rollback the write error: %d\n", ret);

tools/bootconfig/main.c

476

pr_err("The initrd %s may be corrupted. Recommend to rebuild.\n", path);

tools/bootconfig/main.c

519

pr_err("Error: You can give one of -a, -d or -l at once.\n");

tools/bootconfig/main.c

524

pr_err("Error: No initrd is specified.\n");

tools/bpf/resolve_btfids/main.c

1049

pr_err("ERROR: resolve_btfids: failed to collect decl tags from BTF\n");

tools/bpf/resolve_btfids/main.c

1055

pr_err("ERROR: resolve_btfids: failed to collect kfuncs from BTF\n");

tools/bpf/resolve_btfids/main.c

1124

pr_err("ERROR: resolve_btfids: btf id %d is not a function\n", kfunc->btf_id);

tools/bpf/resolve_btfids/main.c

1133

pr_err("ERROR: resolve_btfids: btf id %d is not a function prototype\n", proto_id);

tools/bpf/resolve_btfids/main.c

1139

pr_err("ERROR: function name is too long: %s%s\n", kfunc->name, KF_IMPL_SUFFIX);

tools/bpf/resolve_btfids/main.c

1151

pr_err("ERROR: resolve_btfids: failed to add func %s to BTF\n", tmp_name);

tools/bpf/resolve_btfids/main.c

1173

pr_err("ERROR: resolve_btfids: failed to add decl tag %s for %s\n",

tools/bpf/resolve_btfids/main.c

1183

pr_err("ERROR: resolve_btfids: failed to add func proto for %s\n", kfunc->name);

tools/bpf/resolve_btfids/main.c

1197

pr_err("ERROR: resolve_btfids: failed to add param %s for %s\n",

tools/bpf/resolve_btfids/main.c

1298

pr_err("FAILED: btf permute: %s\n", strerror(-err));

tools/bpf/resolve_btfids/main.c

1314

pr_err("FAILED to distill base BTF: %s\n", strerror(errno));

tools/bpf/resolve_btfids/main.c

1326

pr_err("FAILED to sort BTF: %s\n", strerror(errno));

tools/bpf/resolve_btfids/main.c

1346

pr_err("Output path is too long: %s%s\n", in_path, suffix);

tools/bpf/resolve_btfids/main.c

1378

pr_err("FAILED to open %s: %s\n", elf_path, strerror(errno));

tools/bpf/resolve_btfids/main.c

1385

pr_err("FAILED cannot create ELF descriptor: %s\n", elf_errmsg(-1));

tools/bpf/resolve_btfids/main.c

1392

pr_err("FAILED cannot get shdr str ndx\n");

tools/bpf/resolve_btfids/main.c

1399

pr_err("FAILED to get section header\n");

tools/bpf/resolve_btfids/main.c

1412

pr_err("FAILED: section %s not found in %s\n", BTF_IDS_SECTION, elf_path);

tools/bpf/resolve_btfids/main.c

1418

pr_err("FAILED to get %s section data from %s\n", BTF_IDS_SECTION, elf_path);

tools/bpf/resolve_btfids/main.c

1423

pr_err("FAILED to stat %s: %s\n", btfids_path, strerror(errno));

tools/bpf/resolve_btfids/main.c

1428

pr_err("FAILED: size mismatch - %s section in %s is %zu bytes, %s is %zu bytes\n",

tools/bpf/resolve_btfids/main.c

1435

pr_err("FAILED to open %s: %s\n", btfids_path, strerror(errno));

tools/bpf/resolve_btfids/main.c

1443

pr_err("FAILED to read %s\n", btfids_path);

tools/bpf/resolve_btfids/main.c

1451

pr_err("FAILED to update ELF file %s\n", elf_path);

tools/bpf/resolve_btfids/main.c

331

pr_err("Unexpected kind %d passed to %s() for symbol %s\n", kind, __func__, name);

tools/bpf/resolve_btfids/main.c

337

pr_err("FAILED to parse set name: %s\n", name);

tools/bpf/resolve_btfids/main.c

349

pr_err("FAILED to parse symbol name: %s\n", name);

tools/bpf/resolve_btfids/main.c

394

pr_err("FAILED cannot open %s: %s\n",

tools/bpf/resolve_btfids/main.c

404

pr_err("FAILED cannot create ELF descriptor: %s\n",

tools/bpf/resolve_btfids/main.c

415

pr_err("FAILED cannot get shdr str ndx\n");

tools/bpf/resolve_btfids/main.c

420

pr_err("FAILED cannot get ELF header: %s\n",

tools/bpf/resolve_btfids/main.c

437

pr_err("FAILED get section(%d) header\n", idx);

tools/bpf/resolve_btfids/main.c

443

pr_err("FAILED get section(%d) name\n", idx);

tools/bpf/resolve_btfids/main.c

449

pr_err("FAILED to get section(%d) data from %s\n",

tools/bpf/resolve_btfids/main.c

563

pr_err("FAILED unsupported prefix %s\n", prefix);

tools/bpf/resolve_btfids/main.c

571

pr_err("FAILED symbol %s crossed the number of allowed lists\n",

tools/bpf/resolve_btfids/main.c

590

pr_err("FAILED: load base BTF from %s: %s\n",

tools/bpf/resolve_btfids/main.c

599

pr_err("FAILED: load BTF from %s: %s\n",

tools/bpf/resolve_btfids/main.c

642

pr_err("FAILED: malformed BTF, can't resolve type for ID %d\n",

tools/bpf/resolve_btfids/main.c

664

pr_err("FAILED: malformed BTF, can't resolve name for ID %d\n",

tools/bpf/resolve_btfids/main.c

695

pr_err("WARN: resolve_btfids: unresolved symbol %s\n", id->name);

tools/bpf/resolve_btfids/main.c

707

pr_err("FAILED patching index %lu out of bounds %lu\n",

tools/bpf/resolve_btfids/main.c

762

pr_err("FAILED malformed data for set '%s'\n",

tools/bpf/resolve_btfids/main.c

784

pr_err("Unexpected btf_id_kind %d for set '%s'\n", id->kind, id->name);

tools/bpf/resolve_btfids/main.c

817

pr_err("Couldn't open %s for writing\n", out_path);

tools/bpf/resolve_btfids/main.c

823

pr_err("Failed to write data to %s\n", out_path);

tools/bpf/resolve_btfids/main.c

870

pr_err("btf__raw_data() failed\n");

tools/lib/perf/evlist.c

666

pr_err("Miscounted nr_mmaps %d vs %d\n", nr_mmaps, evlist->nr_mmaps);

tools/lib/perf/evlist.c

698

pr_err("Miscounted nr_mmaps %d vs %d\n", nr_mmaps, evlist->nr_mmaps);

tools/perf/arch/arm/tests/vectors-page.c

17

pr_err("%s not found, is CONFIG_KUSER_HELPERS enabled?\n",

tools/perf/arch/arm/util/auxtrace.c

164

pr_err("Concurrent AUX trace operation not currently supported\n");

tools/perf/arch/arm/util/auxtrace.c

32

pr_err("spes alloc failed\n");

tools/perf/arch/arm/util/auxtrace.c

40

pr_err("sprintf failed\n");

tools/perf/arch/arm/util/auxtrace.c

69

pr_err("can't read directory '%s'\n", path);

tools/perf/arch/arm/util/auxtrace.c

84

pr_err("hisi_ptt alloc failed\n");

tools/perf/arch/arm/util/cs-etm.c

104

pr_err("%s: contextid not supported in ETMv3, disable with %s/contextid=0/\n",

tools/perf/arch/arm/util/cs-etm.c

123

pr_err("%s: CONTEXTIDR_EL1 isn't supported, disable with %s/contextid1=0/\n",

tools/perf/arch/arm/util/cs-etm.c

138

pr_err("%s: CONTEXTIDR_EL2 isn't supported, disable with %s/contextid2=0/\n",

tools/perf/arch/arm/util/cs-etm.c

159

pr_err("%s: timestamp not supported in ETMv3, disable with %s/timestamp=0/\n",

tools/perf/arch/arm/util/cs-etm.c

222

pr_err("%s: Not found on CPU %d. Check hardware and firmware support and that all Coresight drivers are loaded\n",

tools/perf/arch/arm/util/cs-etm.c

285

pr_err("Couldn't find sink \"%s\" on event %s\n"

tools/perf/arch/arm/util/cs-etm.c

290

pr_err("Failed to set sink \"%s\" on event %s with %d (%s)\n",

tools/perf/arch/arm/util/cs-etm.c

332

pr_err("There may be only one %s event\n",

tools/perf/arch/arm/util/cs-etm.c

359

pr_err("Cannot use clockid (-k option) with %s\n",

tools/perf/arch/arm/util/cs-etm.c

409

pr_err("Snapshot size %zu must not be greater than AUX area tracing mmap size %zu\n",

tools/perf/arch/arm/util/cs-etm.c

418

pr_err("Failed to calculate default snapshot size and/or AUX area tracing mmap pages\n");

tools/perf/arch/arm/util/cs-etm.c

592

pr_err("%s: error reading: %s\n", __func__, pmu_path);

tools/perf/arch/arm/util/cs-etm.c

611

pr_err("%s: error reading: %s\n", __func__, pmu_path);

tools/perf/arch/arm/util/unwind-libunwind.c

45

pr_err("unwind: invalid reg id %d\n", regnum);

tools/perf/arch/arm64/util/arm-spe.c

316

pr_err("Snapshot size %zu must not be greater than AUX area tracing mmap size %zu\n",

tools/perf/arch/arm64/util/arm-spe.c

326

pr_err("Failed to calculate default snapshot size and/or AUX area tracing mmap pages\n");

tools/perf/arch/arm64/util/arm-spe.c

351

pr_err("Invalid mmap size for ARM SPE: must be at least %zuKiB and a power of 2\n",

tools/perf/arch/arm64/util/arm-spe.c

408

pr_err("Found unexpected auxtrace event: %s\n",

tools/perf/arch/arm64/util/arm-spe.c

416

pr_err("Arm SPE: Frequency is not supported. "

tools/perf/arch/arm64/util/header.c

75

pr_err("failed to get cpuid string for CPU %d\n", cpu.cpu);

tools/perf/arch/arm64/util/hisi-ptt.c

112

pr_err("There may be only one " HISI_PTT_PMU_NAME "x event\n");

tools/perf/arch/arm64/util/hisi-ptt.c

88

pr_err("Invalid mmap size for HISI PTT: must be at least %zuKiB and a power of 2\n",

tools/perf/arch/loongarch/util/unwind-libunwind.c

77

pr_err("unwind: invalid reg id %d\n", regnum);

tools/perf/arch/mips/util/unwind-libunwind.c

19

pr_err("unwind: invalid reg id %d\n", regnum);

tools/perf/arch/powerpc/util/unwind-libunwind.c

88

pr_err("unwind: invalid reg id %d\n", regnum);

tools/perf/arch/x86/tests/hybrid.c

256

pr_err("Failed allocation");

tools/perf/arch/x86/util/auxtrace.c

40

pr_err("intel_pt and intel_bts may not be used together\n");

tools/perf/arch/x86/util/evsel.c

103

pr_err("'%s' has set config2 (acr_mask?) already, configuration not supported\n", evsel_prev->name);

tools/perf/arch/x86/util/evsel.c

85

pr_err("'%s' does not have acr_mask format support\n", evsel->pmu->name);

tools/perf/arch/x86/util/evsel.c

90

pr_err("'%s' does not have config2 format support\n", evsel->pmu->name);

tools/perf/arch/x86/util/evsel.c

96

pr_err("Previous event does not exist.\n");

tools/perf/arch/x86/util/intel-bts.c

117

pr_err("Intel BTS does not support AUX area sampling\n");

tools/perf/arch/x86/util/intel-bts.c

127

pr_err("There may be only one " INTEL_BTS_PMU_NAME " event\n");

tools/perf/arch/x86/util/intel-bts.c

139

pr_err("Snapshot mode (-S option) requires " INTEL_BTS_PMU_NAME " PMU event (-e " INTEL_BTS_PMU_NAME ")\n");

tools/perf/arch/x86/util/intel-bts.c

147

pr_err(INTEL_BTS_PMU_NAME " does not support per-cpu recording\n");

tools/perf/arch/x86/util/intel-bts.c

176

pr_err("Snapshot size %zu must not be greater than AUX area tracing mmap size %zu\n",

tools/perf/arch/x86/util/intel-bts.c

182

pr_err("Failed to calculate default snapshot size and/or AUX area tracing mmap pages\n");

tools/perf/arch/x86/util/intel-bts.c

211

pr_err("Invalid mmap size for Intel BTS: must be at least %zuKiB and a power of 2\n",

tools/perf/arch/x86/util/intel-bts.c

413

pr_err("%s: failed, error %d\n", __func__, err);

tools/perf/arch/x86/util/intel-pt.c

1173

pr_err("%s: failed, error %d\n", __func__, err);

tools/perf/arch/x86/util/intel-pt.c

526

pr_err("Invalid %s for %s. Valid values are: %s\n",

tools/perf/arch/x86/util/intel-pt.c

605

pr_err(INTEL_PT_PMU_NAME " supports at most one event with aux-output\n");

tools/perf/arch/x86/util/intel-pt.c

632

pr_err("There may be only one " INTEL_PT_PMU_NAME " event\n");

tools/perf/arch/x86/util/intel-pt.c

646

pr_err("Snapshot mode (-S option) requires " INTEL_PT_PMU_NAME " PMU event (-e " INTEL_PT_PMU_NAME ")\n");

tools/perf/arch/x86/util/intel-pt.c

651

pr_err("Snapshot mode (" INTEL_PT_PMU_NAME " PMU) and sample trace cannot be used together\n");

tools/perf/arch/x86/util/intel-pt.c

656

pr_err("Cannot use clockid (-k option) with " INTEL_PT_PMU_NAME "\n");

tools/perf/arch/x86/util/intel-pt.c

700

pr_err("Snapshot size %zu must not be greater than AUX area tracing mmap size %zu\n",

tools/perf/arch/x86/util/intel-pt.c

706

pr_err("Failed to calculate default snapshot size and/or AUX area tracing mmap pages\n");

tools/perf/arch/x86/util/intel-pt.c

733

pr_err("Sample size %zu must not be greater than AUX area tracing mmap size %zu\n",

tools/perf/arch/x86/util/intel-pt.c

768

pr_err("Invalid mmap size for Intel Processor Trace: must be at least %zuKiB and a power of 2\n",

tools/perf/arch/x86/util/iostat.c

136

pr_err("Failed to realloc memory\n");

tools/perf/arch/x86/util/iostat.c

160

pr_err("Mode iostat is not supported\n");

tools/perf/arch/x86/util/iostat.c

166

pr_err("Invalid mapping data: iio_%d; die%d\n",

tools/perf/arch/x86/util/iostat.c

204

pr_err("Unsupported uncore pmu configuration\n");

tools/perf/arch/x86/util/iostat.c

284

pr_err("Requested root ports were not found\n");

tools/perf/arch/x86/util/tsc.c

36

pr_err("Failed to read /proc/cpuinfo for TSC frequency\n");

tools/perf/arch/x86/util/tsc.c

53

pr_err("Failed to find TSC frequency in /proc/cpuinfo\n");

tools/perf/arch/x86/util/unwind-libunwind.c

109

pr_err("unwind: invalid reg id %d\n", regnum);

tools/perf/arch/x86/util/unwind-libunwind.c

69

pr_err("unwind: invalid reg id %d\n", regnum);

tools/perf/bench/evlist-open-close.c

115

pr_err("evlist__open: %s\n", str_error_r(errno, sbuf, sizeof(sbuf)));

tools/perf/bench/evlist-open-close.c

121

pr_err("evlist__mmap: %s\n", str_error_r(errno, sbuf, sizeof(sbuf)));

tools/perf/bench/evlist-open-close.c

194

pr_err("strbuf_init: %s\n", str_error_r(err, sbuf, sizeof(sbuf)));

tools/perf/bench/evlist-open-close.c

201

pr_err("strbuf_add: %s\n", str_error_r(err, sbuf, sizeof(sbuf)));

tools/perf/bench/evlist-open-close.c

207

pr_err("strbuf_addch: %s\n", str_error_r(err, sbuf, sizeof(sbuf)));

tools/perf/bench/evlist-open-close.c

258

pr_err("%s\n", errbuf);

tools/perf/bench/evlist-open-close.c

68

pr_err("Not enough memory to create evlist\n");

tools/perf/bench/evlist-open-close.c

77

pr_err("Run 'perf list' for a list of valid events\n");

tools/perf/bench/evlist-open-close.c

86

pr_err("Invalid User: %s", uid_str);

tools/perf/bench/evlist-open-close.c

96

pr_err("Not enough memory to create thread/cpu maps\n");

tools/perf/bench/futex-wake-parallel.c

18

pr_err("%s: pthread_barrier_t unavailable, disabling this test...\n", __func__);

tools/perf/bench/pmu-scan.c

102

pr_err("Unmatched number of event aliases in %s: expect %d vs got %d\n",

tools/perf/bench/pmu-scan.c

111

pr_err("Unmatched number of event formats in %s: expect %d vs got %d\n",

tools/perf/bench/pmu-scan.c

142

pr_err("Failed to initialize PMU scan result\n");

tools/perf/bench/pmu-scan.c

90

pr_err("Cannot find PMU %s\n", r->name);

tools/perf/bench/pmu-scan.c

95

pr_err("Unmatched number of event caps in %s: expect %d vs got %d\n",

tools/perf/bench/synthesize.c

126

pr_err("Session creation failed.\n");

tools/perf/bench/synthesize.c

132

pr_err("Thread map creation failed.\n");

tools/perf/builtin-annotate.c

842

pr_err("--show-nr-samples is not available in --gtk mode at this time\n");

tools/perf/builtin-annotate.c

849

pr_err("Error: Data type profiling is disabled due to missing DWARF support\n");

tools/perf/builtin-c2c.c

2055

pr_err("Invalid --fields key: `%s'", tok); \

tools/perf/builtin-c2c.c

2058

pr_err("Unknown --fields key: `%s'", tok); \

tools/perf/builtin-c2c.c

2965

pr_err("failed: unknown display type: %s\n", str);

tools/perf/builtin-c2c.c

3003

pr_err("unrecognized sort token: %s\n", tok);

tools/perf/builtin-c2c.c

3155

pr_err("Failed to allocate memory for annotation options\n");

tools/perf/builtin-c2c.c

3163

pr_err("Failed to allocate memory for annotation options\n");

tools/perf/builtin-c2c.c

3230

pr_err("Failed setup nodes\n");

tools/perf/builtin-c2c.c

3287

pr_err("failed to process sample\n");

tools/perf/builtin-c2c.c

3342

pr_err("failed to setup UI\n");

tools/perf/builtin-c2c.c

3365

pr_err("failed: there is no PMU that supports perf c2c\n");

tools/perf/builtin-c2c.c

3412

pr_err("failed: no PMU supports the memory events\n");

tools/perf/builtin-c2c.c

3417

pr_err("failed: memory events not supported\n");

tools/perf/builtin-check.c

117

pr_err("Unknown feature '%s', please use 'perf version --build-options' to see which ones are available.\n", feature);

tools/perf/builtin-check.c

148

pr_err("Too many arguments passed to 'perf check feature'\n");

tools/perf/builtin-check.c

156

pr_err("ERROR: failed to allocate memory for feature list\n");

tools/perf/builtin-check.c

184

pr_err("Unknown subcommand: %s\n", argv[0]);

tools/perf/builtin-config.c

131

pr_err("The config variable does not contain a section name: %s\n", arg);

tools/perf/builtin-config.c

135

pr_err("The config variable does not contain a variable name: %s\n", arg);

tools/perf/builtin-config.c

143

pr_err("The config variable does not contain a value: %s\n", arg);

tools/perf/builtin-config.c

149

pr_err("invalid config variable: %s\n", arg);

tools/perf/builtin-config.c

180

pr_err("Failed to add '%s=%s'\n", var, value);

tools/perf/builtin-config.c

185

pr_err("Failed to set the configs on %s\n", config_filename);

tools/perf/builtin-config.c

208

pr_err("Error: only one config file at a time\n");

tools/perf/builtin-config.c

235

pr_err("Error: takes no arguments\n");

tools/perf/builtin-config.c

240

pr_err("Nothing configured, "

tools/perf/builtin-config.c

255

pr_err("%s: strdup failed\n", __func__);

tools/perf/builtin-config.c

266

pr_err("%s is not configured: %s\n",

tools/perf/builtin-config.c

274

pr_err("Failed to add '%s=%s'\n",

tools/perf/builtin-config.c

288

pr_err("Failed to set the configs on %s\n",

tools/perf/builtin-daemon.c

1266

pr_err("failed: config not found\n");

tools/perf/builtin-daemon.c

1430

pr_err("failed: config not found\n");

tools/perf/builtin-daemon.c

1456

pr_err("failed: config not found\n");

tools/perf/builtin-daemon.c

1482

pr_err("failed: config not found\n");

tools/perf/builtin-daemon.c

1533

pr_err("failed: unknown command '%s'\n", argv[0]);

tools/perf/builtin-daemon.c

1537

pr_err("failed: config not found\n");

tools/perf/builtin-daemon.c

224

pr_err("failed: can't redefine base, bailing out\n");

tools/perf/builtin-daemon.c

253

pr_err("failed: base not defined\n");

tools/perf/builtin-daemon.c

260

pr_err("failed: permission denied for '%s' base\n",

tools/perf/builtin-daemon.c

264

pr_err("failed: base '%s' does not exists\n",

tools/perf/builtin-daemon.c

268

pr_err("failed: can't access base '%s': %m\n", daemon->base);

tools/perf/builtin-daemon.c

274

pr_err("failed: base '%s' is not directory\n",

tools/perf/builtin-daemon.c

410

pr_err("failed to read signal fd\n");

tools/perf/builtin-daemon.c

546

pr_err("failed: write to control pipe: %m (%s)\n", control_path);

tools/perf/builtin-daemon.c

557

pr_err("failed: control ack timeout\n");

tools/perf/builtin-daemon.c

562

pr_err("failed: did not received an ack\n");

tools/perf/builtin-daemon.c

600

pr_err("failed: control path too long '%s'\n", path);

tools/perf/builtin-daemon.c

872

pr_err("failed: control path too long '%s'\n", path);

tools/perf/builtin-daemon.c

907

pr_err("failed to wait for session %s\n",

tools/perf/builtin-daemon.c

962

pr_err("failed to wait for sessions\n");

tools/perf/builtin-data.c

125

pr_err("Unknown command: %s\n", cmdstr);

tools/perf/builtin-data.c

65

pr_err("You cannot specify both --to-ctf and --to-json.\n");

tools/perf/builtin-data.c

70

pr_err("You must specify one of --to-ctf or --to-json.\n");

tools/perf/builtin-data.c

75

pr_err("You must specify --to-json.\n");

tools/perf/builtin-data.c

87

pr_err("The libbabeltrace support is not compiled in. perf should be "

tools/perf/builtin-diff.c

1088

pr_err("Invalid time string\n");

tools/perf/builtin-diff.c

1095

pr_err("Invalid time string\n");

tools/perf/builtin-diff.c

1148

pr_err("Failed to open %s\n", d->data.path);

tools/perf/builtin-diff.c

1181

pr_err("Failed to open %s\n", d->data.path);

tools/perf/builtin-diff.c

1200

pr_err("Failed to process %s\n", d->data.path);

tools/perf/builtin-diff.c

1831

pr_err("Memory allocation failed\n");

tools/perf/builtin-diff.c

1891

pr_err("Order option out of limit.\n");

tools/perf/builtin-diff.c

1932

pr_err("Invalid compute method: %s\n", value);

tools/perf/builtin-diff.c

210

pr_err("Failed: wrong weight data, use 'wdiff:w1,w2'\n");

tools/perf/builtin-diff.c

221

pr_err("Failed: extra option specified '%s'", opt);

tools/perf/builtin-diff.c

266

pr_err("Failed: '%s' is not computation method "

tools/perf/builtin-ftrace.c

1053

pr_err("failed to reset ftrace\n");

tools/perf/builtin-ftrace.c

1066

pr_err("failed to set current_tracer to function_graph\n");

tools/perf/builtin-ftrace.c

1072

pr_err("failed to open trace_pipe\n");

tools/perf/builtin-ftrace.c

1078

pr_err("failed to open trace_pipe\n");

tools/perf/builtin-ftrace.c

1092

pr_err("can't enable tracing\n");

tools/perf/builtin-ftrace.c

1149

pr_err("failed to allocate memory for the buckets\n");

tools/perf/builtin-ftrace.c

1171

pr_err("workload failed: %s\n", emsg);

tools/perf/builtin-ftrace.c

1386

pr_err("failed to allocate memory for the result\n");

tools/perf/builtin-ftrace.c

1432

pr_err("failed to prepare func profiler\n");

tools/perf/builtin-ftrace.c

1440

pr_err("failed to reset ftrace\n");

tools/perf/builtin-ftrace.c

1452

pr_err("failed to set current_tracer to %s\n", ftrace->tracer);

tools/perf/builtin-ftrace.c

1460

pr_err("failed to open trace_pipe\n");

tools/perf/builtin-ftrace.c

1469

pr_err("failed to open trace_pipe\n");

tools/perf/builtin-ftrace.c

1476

pr_err("can't enable tracing\n");

tools/perf/builtin-ftrace.c

1499

pr_err("workload failed: %s\n", emsg);

tools/perf/builtin-ftrace.c

1541

pr_err("Please select \"function_graph\" (default) or \"function\"\n");

tools/perf/builtin-ftrace.c

1569

pr_err("Filter parse error at %td.\n", err - str + 1);

tools/perf/builtin-ftrace.c

1570

pr_err("Source: \"%s\"\n", str);

tools/perf/builtin-ftrace.c

1571

pr_err(" %*c\n", (int)(err - str + 1), '^');

tools/perf/builtin-ftrace.c

1659

pr_err("buffer size too small, must larger than 1KB.");

tools/perf/builtin-ftrace.c

1737

pr_err("Unknown sort key: %s\n", str);

tools/perf/builtin-ftrace.c

1869

pr_err("ftrace is not supported on this system\n");

tools/perf/builtin-ftrace.c

1914

pr_err("Should provide a function or events to measure\n");

tools/perf/builtin-ftrace.c

1921

pr_err("Please specify either of function or events\n");

tools/perf/builtin-ftrace.c

1928

pr_err("Event processing needs BPF\n");

tools/perf/builtin-ftrace.c

1935

pr_err("--min-latency works only with --bucket-range\n");

tools/perf/builtin-ftrace.c

1946

pr_err("--max-latency works only with --bucket-range\n");

tools/perf/builtin-ftrace.c

1955

pr_err("--max-latency must be larger than min-latency + bucket-range\n");

tools/perf/builtin-ftrace.c

1979

pr_err("Invalid subcommand\n");

tools/perf/builtin-ftrace.c

1989

pr_err("%s\n", errbuf);

tools/perf/builtin-ftrace.c

344

pr_err("failed to delete tracing/instances directory\n");

tools/perf/builtin-ftrace.c

367

pr_err("failed to create tracing/instances directory\n");

tools/perf/builtin-ftrace.c

503

pr_err("invalid graph depth: %d\n", ftrace->graph_depth);

tools/perf/builtin-ftrace.c

641

pr_err("failed to set ftrace pid\n");

tools/perf/builtin-ftrace.c

646

pr_err("failed to set tracing cpumask\n");

tools/perf/builtin-ftrace.c

651

pr_err("failed to set tracing option func_stack_trace\n");

tools/perf/builtin-ftrace.c

656

pr_err("failed to set tracing option irq-info\n");

tools/perf/builtin-ftrace.c

661

pr_err("failed to set tracing filters\n");

tools/perf/builtin-ftrace.c

666

pr_err("failed to set graph depth\n");

tools/perf/builtin-ftrace.c

671

pr_err("failed to set tracing per-cpu buffer size\n");

tools/perf/builtin-ftrace.c

676

pr_err("failed to set tracing option function-fork\n");

tools/perf/builtin-ftrace.c

681

pr_err("failed to set tracing option sleep-time\n");

tools/perf/builtin-ftrace.c

686

pr_err("failed to set tracing option funcgraph-args\n");

tools/perf/builtin-ftrace.c

691

pr_err("failed to set tracing option funcgraph-retval\n");

tools/perf/builtin-ftrace.c

696

pr_err("failed to set tracing option funcgraph-retaddr\n");

tools/perf/builtin-ftrace.c

701

pr_err("failed to set tracing option funcgraph-irqs\n");

tools/perf/builtin-ftrace.c

706

pr_err("failed to set tracing option funcgraph-proc/funcgraph-abstime\n");

tools/perf/builtin-ftrace.c

711

pr_err("failed to set tracing thresh\n");

tools/perf/builtin-ftrace.c

716

pr_err("failed to set tracing option funcgraph-tail\n");

tools/perf/builtin-ftrace.c

755

pr_err("failed to reset ftrace\n");

tools/perf/builtin-ftrace.c

767

pr_err("failed to set current_tracer to %s\n", ftrace->tracer);

tools/perf/builtin-ftrace.c

775

pr_err("failed to open trace_pipe\n");

tools/perf/builtin-ftrace.c

784

pr_err("failed to open trace_pipe\n");

tools/perf/builtin-ftrace.c

796

pr_err("can't enable tracing\n");

tools/perf/builtin-ftrace.c

806

pr_err("can't enable tracing\n");

tools/perf/builtin-ftrace.c

82

pr_err("ftrace only works for %s!\n",

tools/perf/builtin-ftrace.c

832

pr_err("workload failed: %s\n", emsg);

tools/perf/builtin-help.c

256

pr_err("Config with no key for man viewer: %s", name);

tools/perf/builtin-help.c

384

pr_err("Unable to setup man path");

tools/perf/builtin-help.c

418

pr_err("no man viewer handled the request");

tools/perf/builtin-help.c

439

pr_err("'%s': not a documentation directory.", html_path);

tools/perf/builtin-help.c

56

pr_err("unrecognized help format '%s'", format);

tools/perf/builtin-inject.c

1014

pr_err("problem processing %d event, skipping it.\n",

tools/perf/builtin-inject.c

1174

pr_err("Invalid VCPU %u\n", vcpu);

tools/perf/builtin-inject.c

1181

pr_err("Fatal error: Two threads found with the same VCPU\n");

tools/perf/builtin-inject.c

1321

pr_err("Failed to find guest id %"PRIu64"\n", id);

tools/perf/builtin-inject.c

1336

pr_err("Failed to add guest attr.\n");

tools/perf/builtin-inject.c

1538

pr_err("Guest data has no sample IDs");

tools/perf/builtin-inject.c

1679

pr_err("Unexpected type fetching guest event");

tools/perf/builtin-inject.c

1685

pr_err("Parse failed fetching guest event");

tools/perf/builtin-inject.c

1710

pr_err("No evsel for id %"PRIu64"\n", sample->id);

tools/perf/builtin-inject.c

1720

pr_err("Bad id sample size %d\n", ret);

tools/perf/builtin-inject.c

1781

pr_err("Bad id_hdr_size %u\n", id_hdr_size);

tools/perf/builtin-inject.c

1786

pr_err("Bad event size %u\n", ev->header.size);

tools/perf/builtin-inject.c

1794

pr_err("Bad raw event size %u\n", ev->header.size);

tools/perf/builtin-inject.c

1800

pr_err("Guest event with unknown id %llu\n",

tools/perf/builtin-inject.c

1811

pr_err("Guest event with unknown VCPU %u\n",

tools/perf/builtin-inject.c

1825

pr_err("Bad new event size %u\n", ev->header.size);

tools/perf/builtin-inject.c

1873

pr_err("No VCPU threads found for pid %u\n", gs->machine_pid);

tools/perf/builtin-inject.c

1891

pr_err("Failed to synthesize id_index\n");

tools/perf/builtin-inject.c

1897

pr_err("Failed to add guest build IDs\n");

tools/perf/builtin-inject.c

1955

pr_err("Switch event does not have CPU\n");

tools/perf/builtin-inject.c

1980

pr_err("Samples for %s event do not have %s attribute set.",

tools/perf/builtin-inject.c

2087

pr_err("--guest-data option requires guest perf.data file name, "

tools/perf/builtin-inject.c

2354

pr_err("Failed to process %s, error %d\n", name, ret);

tools/perf/builtin-inject.c

2388

pr_err("Failed to flush guest events\n");

tools/perf/builtin-inject.c

2446

pr_err("Failed to copy kcore\n");

tools/perf/builtin-inject.c

2453

pr_err("Failed to copy guest kcore\n");

tools/perf/builtin-inject.c

2572

pr_err("--strip option requires --itrace option\n");

tools/perf/builtin-inject.c

2581

pr_err("Input file name required for in-place updating\n");

tools/perf/builtin-inject.c

2585

pr_err("Output file name must not be specified for in-place updating\n");

tools/perf/builtin-inject.c

2589

pr_err("The input file would be updated in place, "

tools/perf/builtin-inject.c

2684

pr_err("Couldn't write a new pipe header.\n");

tools/perf/builtin-inject.c

2718

pr_err("Couldn't parse known build ids.\n");

tools/perf/builtin-inject.c

2727

pr_err("--convert-callchain cannot work with pipe\n");

tools/perf/builtin-inject.c

2733

pr_err("--convert-callchain requires DWARF call graph.\n");

tools/perf/builtin-inject.c

2740

pr_err("callchain allocation failed\n");

tools/perf/builtin-inject.c

483

pr_err("cannot find or create a task %d/%d.\n", tid, pid);

tools/perf/builtin-inject.c

535

pr_err("No mmap events found\n");

tools/perf/builtin-inject.c

867

pr_err("Can't synthesize build_id event for %s\n", filename);

tools/perf/builtin-inject.c

907

pr_err("Can't synthesize build_id event for %s\n", filename);

tools/perf/builtin-kallsyms.c

34

pr_err("Couldn't read /proc/kallsyms\n");

tools/perf/builtin-kmem.c

113

pr_err("%s: malloc failed\n", __func__);

tools/perf/builtin-kmem.c

1399

pr_err("Initializing perf session tracepoint handlers failed\n");

tools/perf/builtin-kmem.c

1414

pr_err("error during process events: %d\n", err);

tools/perf/builtin-kmem.c

158

pr_err("%s: malloc failed\n", __func__);

tools/perf/builtin-kmem.c

1686

pr_err("%s: memdup failed\n", __func__);

tools/perf/builtin-kmem.c

1706

pr_err("%s: memdup failed\n", __func__);

tools/perf/builtin-kmem.c

1724

pr_err("%s: strdup failed\n", __func__);

tools/perf/builtin-kmem.c

1733

pr_err("Unknown slab --sort key: '%s'", tok);

tools/perf/builtin-kmem.c

1750

pr_err("%s: strdup failed\n", __func__);

tools/perf/builtin-kmem.c

1759

pr_err("Unknown page --sort key: '%s'", tok);

tools/perf/builtin-kmem.c

1923

pr_err("invalid default value ('slab' or 'page' required): %s\n",

tools/perf/builtin-kmem.c

2010

pr_err(errmsg, "slab", "slab");

tools/perf/builtin-kmem.c

2020

pr_err(errmsg, "page", "page");

tools/perf/builtin-kmem.c

2030

pr_err("Invalid time string\n");

tools/perf/builtin-kmem.c

359

pr_err("Invalid regex: %s\n%s", pattern, err);

tools/perf/builtin-kmem.c

365

pr_err("cannot load kernel map\n");

tools/perf/builtin-kvm.c

1177

pr_err("Failed to look up CPU type: %s\n",

tools/perf/builtin-kvm.c

1186

pr_err("Failed to look up CPU type\n");

tools/perf/builtin-kvm.c

1193

pr_err("CPU %s is not supported.\n", cpuid);

tools/perf/builtin-kvm.c

1201

pr_err("Invalid vcpu:%d.\n", vcpu);

tools/perf/builtin-kvm.c

1234

pr_err("Failed to parse sample\n");

tools/perf/builtin-kvm.c

1246

pr_err("Failed to enqueue sample: %d\n", err);

tools/perf/builtin-kvm.c

1321

pr_err("timerfd_create failed\n");

tools/perf/builtin-kvm.c

1331

pr_err("timerfd_settime failed: %d\n", errno);

tools/perf/builtin-kvm.c

1351

pr_err("Failed to read timer fd: %d\n", errno);

tools/perf/builtin-kvm.c

1356

pr_err("Error reading timer fd - invalid size returned\n");

tools/perf/builtin-kvm.c

1385

pr_err("Failed to get current flags for fd %d\n", fd);

tools/perf/builtin-kvm.c

1390

pr_err("Failed to set non-block option on fd %d\n", fd);

tools/perf/builtin-kvm.c

1566

pr_err("Initializing perf session failed\n");

tools/perf/builtin-kvm.c

1603

pr_err("Error parsing process id string\n");

tools/perf/builtin-kvm.c

1670

pr_err("Unable to setup the kvm tracepoints\n");

tools/perf/builtin-kvm.c

1793

pr_err("Error parsing %s tracepoint: subsystem delimiter not found\n",

tools/perf/builtin-kvm.c

1802

pr_err("Failed to add %s tracepoint to the list\n", *events_tp);

tools/perf/builtin-kvm.c

1910

pr_err("Unable to setup the kvm tracepoints\n");

tools/perf/builtin-kvm.c

2166

pr_err("Failed to allocate memory for filename\n");

tools/perf/builtin-kvm.c

463

pr_err("Invalid field key: '%s'", tok);

tools/perf/builtin-kvm.c

465

pr_err("Unknown field key: '%s'", tok);

tools/perf/builtin-kvm.c

467

pr_err("Fail to initialize for field key: '%s'", tok);

tools/perf/builtin-kvm.c

686

pr_err("Not enough memory\n");

tools/perf/builtin-kvm.c

733

pr_err("Failed to allocate kvm info\n");

tools/perf/builtin-kvm.c

741

pr_err("Failed to allocate hist entry\n");

tools/perf/builtin-kvm.c

931

pr_err("%s: Not enough memory\n", __func__);

tools/perf/builtin-kvm.c

983

pr_err("Unsupported sort key: %s\n", kvm->sort_key);

tools/perf/builtin-kwork.c

1094

pr_err("Failed to set softirq tracepoints handlers\n");

tools/perf/builtin-kwork.c

1127

pr_err("Failed to copy symbol name\n");

tools/perf/builtin-kwork.c

1225

pr_err("Failed to set workqueue tracepoints handlers\n");

tools/perf/builtin-kwork.c

1293

pr_err("Failed to set sched tracepoints handlers\n");

tools/perf/builtin-kwork.c

1766

pr_err("Invalid cpu bitmap\n");

tools/perf/builtin-kwork.c

1774

pr_err("Invalid time span\n");

tools/perf/builtin-kwork.c

1816

pr_err("Failed to set libtraceevent function resolver\n");

tools/perf/builtin-kwork.c

1988

pr_err("Failed to validate sym arguments\n");

tools/perf/builtin-kwork.c

261

pr_err("Failed to zalloc kwork atom page\n");

tools/perf/builtin-kwork.c

365

pr_err("Failed to zalloc kwork work\n");

tools/perf/builtin-kwork.c

997

pr_err("Failed to set irq tracepoints handlers\n");

tools/perf/builtin-list.c

349

pr_err("Unexpected format character '%c'\n", fmt[fmt_pos]);

tools/perf/builtin-list.c

632

pr_err("ERROR: cputype is not supported!\n");

tools/perf/builtin-lock.c

121

pr_err("memory allocation failed\n");

tools/perf/builtin-lock.c

143

pr_err("memory allocation failed\n");

tools/perf/builtin-lock.c

1875

pr_err("Initializing perf session failed\n");

tools/perf/builtin-lock.c

1887

pr_err("Initializing perf session tracepoint handlers failed\n");

tools/perf/builtin-lock.c

1892

pr_err("Initializing perf session tracepoint handlers failed\n");

tools/perf/builtin-lock.c

1933

pr_err("Cannot use thread and addr mode together\n");

tools/perf/builtin-lock.c

1940

pr_err("Lock owners are available only with BPF\n");

tools/perf/builtin-lock.c

1947

pr_err("Cannot use owner and addr mode together\n");

tools/perf/builtin-lock.c

1954

pr_err("Cgroups are available only with BPF\n");

tools/perf/builtin-lock.c

1961

pr_err("Cannot use cgroup and addr mode together\n");

tools/perf/builtin-lock.c

1968

pr_err("Cannot use cgroup and thread mode together\n");

tools/perf/builtin-lock.c

1978

pr_err("Cannot use the separator that is already used\n");

tools/perf/builtin-lock.c

2035

pr_err("Initializing perf session failed\n");

tools/perf/builtin-lock.c

2059

pr_err("%s\n", errbuf);

tools/perf/builtin-lock.c

2086

pr_err("lock contention BPF setup failed\n");

tools/perf/builtin-lock.c

2095

pr_err("lock contention evsel not found\n");

tools/perf/builtin-lock.c

2101

pr_err("Initializing perf session tracepoint handlers failed\n");

tools/perf/builtin-lock.c

2108

pr_err("Failed to setup output field\n");

tools/perf/builtin-lock.c

2186

pr_err("tracepoint %s is not enabled.\n",

tools/perf/builtin-lock.c

2242

pr_err("invalid BPF map length: %s\n", str);

tools/perf/builtin-lock.c

2260

pr_err("invalid max stack depth: %s\n", str);

tools/perf/builtin-lock.c

2265

pr_err("invalid max stack depth: %ld\n", val);

tools/perf/builtin-lock.c

2309

pr_err("Unknown lock flags name: %s\n", tok);

tools/perf/builtin-lock.c

2336

pr_err("Unknown lock name: %s\n", tok);

tools/perf/builtin-lock.c

2353

pr_err("Memory allocation failure\n");

tools/perf/builtin-lock.c

2368

pr_err("Memory allocation failure\n");

tools/perf/builtin-lock.c

2374

pr_err("Memory allocation failure\n");

tools/perf/builtin-lock.c

2390

pr_err("Memory allocation failure\n");

tools/perf/builtin-lock.c

2396

pr_err("Memory allocation failure\n");

tools/perf/builtin-lock.c

2460

pr_err("Cannot open %s\n", str);

tools/perf/builtin-lock.c

2475

pr_err("Failed to create cgroup: %s\n", name);

tools/perf/builtin-lock.c

2480

pr_err("Failed to read cgroup id for %s\n", name);

tools/perf/builtin-lock.c

2487

pr_err("Memory allocation failure\n");

tools/perf/builtin-lock.c

2526

pr_err("lock delay should have '@' sign: %s\n", spec);

tools/perf/builtin-lock.c

2530

pr_err("lock delay should have time before '@': %s\n", spec);

tools/perf/builtin-lock.c

2543

pr_err("invalid delay time: %s@%s\n", spec, at + 1);

tools/perf/builtin-lock.c

2548

pr_err("lock delay is too long: %s (> 10ms)\n", spec);

tools/perf/builtin-lock.c

2554

pr_err("Memory allocation failure\n");

tools/perf/builtin-lock.c

2561

pr_err("Memory allocation failure\n");

tools/perf/builtin-lock.c

319

pr_err("Unknown compare key: %s\n", sort_key);

tools/perf/builtin-lock.c

342

pr_err("Unknown output field: %s\n", name);

tools/perf/builtin-lock.c

511

pr_err("memory allocation failed\n");

tools/perf/builtin-lock.c

548

pr_err("Invalid aggregation mode: %d\n", aggr_mode);

tools/perf/builtin-mem.c

57

pr_err("failed: there is no PMU that supports perf mem\n");

tools/perf/builtin-mem.c

90

pr_err("failed: no PMU supports the memory events\n");

tools/perf/builtin-mem.c

95

pr_err("failed: memory events not supported\n");

tools/perf/builtin-probe.c

263

pr_err(" Error: '--vars' doesn't accept arguments.\n");

tools/perf/builtin-probe.c

337

pr_err("%s", msg);

tools/perf/builtin-probe.c

340

pr_err("\n");

tools/perf/builtin-probe.c

60

pr_err("Too many probes (> %d) were specified.", MAX_PROBES);

tools/perf/builtin-probe.c

635

pr_err(" Error: -v and -q are exclusive.\n");

tools/perf/builtin-probe.c

681

pr_err(" Error: Don't use --list with --exec.\n");

tools/perf/builtin-probe.c

723

pr_err(" Error: --bootconfig doesn't support uprobes.\n");

tools/perf/builtin-probe.c

731

pr_err(" Error: -x/-m must follow the probe definitions.\n");

tools/perf/builtin-probe.c

95

pr_err("Filter parse error at %td.\n", err - str + 1);

tools/perf/builtin-probe.c

96

pr_err("Source: \"%s\"\n", str);

tools/perf/builtin-probe.c

97

pr_err(" %*c\n", (int)(err - str + 1), '^');

tools/perf/builtin-record.c

1183

pr_err("Thread and evlist pollfd index mismatch\n");

tools/perf/builtin-record.c

1204

pr_err("Failed to duplicate descriptor in main thread pollfd\n");

tools/perf/builtin-record.c

1211

pr_err("Failed to map thread and evlist pollfd indexes\n");

tools/perf/builtin-record.c

1225

pr_err("Failed to allocate thread data\n");

tools/perf/builtin-record.c

1238

pr_err("Failed to initialize thread[%d] maps\n", t);

tools/perf/builtin-record.c

1243

pr_err("Failed to initialize thread[%d] pollfd\n", t);

tools/perf/builtin-record.c

1250

pr_err("Failed to open thread[%d] communication pipes\n", t);

tools/perf/builtin-record.c

1256

pr_err("Failed to add descriptor to thread[%d] pollfd\n", t);

tools/perf/builtin-record.c

1299

pr_err("Permission error mapping pages.\n"

tools/perf/builtin-record.c

1307

pr_err("failed to mmap: %m\n");

tools/perf/builtin-record.c

1326

pr_err("Failed to create data directory: %m\n");

tools/perf/builtin-record.c

1464

pr_err("failed to set filter \"%s\" on event %s: %m\n",

tools/perf/builtin-record.c

1552

pr_err("Couldn't record guest kernel [%d]'s reference"

tools/perf/builtin-record.c

1562

pr_err("Couldn't record guest kernel [%d]'s reference"

tools/perf/builtin-record.c

1919

pr_err("Failed to get current timestamp\n");

tools/perf/builtin-record.c

2154

pr_err("Couldn't synthesize thread map.\n");

tools/perf/builtin-record.c

2161

pr_err("Couldn't synthesize cpu map.\n");

tools/perf/builtin-record.c

2239

pr_err("Couldn't create side band evlist.\n.");

tools/perf/builtin-record.c

2245

pr_err("Couldn't ask for PERF_RECORD_BPF_EVENT side band events.\n.");

tools/perf/builtin-record.c

2275

pr_err("gettimeofday failed, cannot set reference time.\n");

tools/perf/builtin-record.c

2280

pr_err("clock_gettime failed, cannot set reference time.\n");

tools/perf/builtin-record.c

2339

pr_err("Failed to block signals on threads start: %m\n");

tools/perf/builtin-record.c

2357

pr_err("Failed to start threads: %m\n");

tools/perf/builtin-record.c

2380

pr_err("Failed to unblock signals on threads start: %m\n");

tools/perf/builtin-record.c

2448

pr_err("cgroup tracking is not supported\n");

tools/perf/builtin-record.c

2477

pr_err("Perf session creation failed.\n");

tools/perf/builtin-record.c

2483

pr_err("Parallel trace streaming is not available in pipe mode.\n");

tools/perf/builtin-record.c

2487

pr_err("Parallel trace streaming is not available in AUX area tracing mode.\n");

tools/perf/builtin-record.c

2496

pr_err("Compression initialization failed.\n");

tools/perf/builtin-record.c

2502

pr_err("Failed to create wakeup eventfd, error: %m\n");

tools/perf/builtin-record.c

2508

pr_err("Failed to add wakeup eventfd to poll list\n");

tools/perf/builtin-record.c

2519

pr_err("ERROR: kcore is not readable.\n");

tools/perf/builtin-record.c

2532

pr_err("Couldn't run the workload!\n");

tools/perf/builtin-record.c

2573

pr_err("ERROR: Failed to copy kcore\n");

tools/perf/builtin-record.c

2603

pr_err("Couldn't generate buildids. "

tools/perf/builtin-record.c

262

pr_err("failed to write perf data, error: %m\n");

tools/perf/builtin-record.c

2624

pr_err("Could not set realtime priority.\n");

tools/perf/builtin-record.c

2752

pr_err("AUX area tracing snapshot failed\n");

tools/perf/builtin-record.c

2785

pr_err("Failed to switch to new file\n");

tools/perf/builtin-record.c

2872

pr_err("Failed to collect '%s' for the '%s' workload: %s\n",

tools/perf/builtin-record.c

309

pr_err("failed to queue perf data, error: %m\n");

tools/perf/builtin-record.c

332

pr_err("failed to write perf data, error: %m\n");

tools/perf/builtin-record.c

3425

pr_err("Invalid synth option: %s\n", str);

tools/perf/builtin-record.c

3748

pr_err("Failed to allocate thread masks\n");

tools/perf/builtin-record.c

3755

pr_err("Failed to allocate thread masks[%d]\n", t);

tools/perf/builtin-record.c

3804

pr_err("Failed to allocate CPUs mask\n");

tools/perf/builtin-record.c

3810

pr_err("Failed to init cpu mask\n");

tools/perf/builtin-record.c

3816

pr_err("Failed to allocate full mask\n");

tools/perf/builtin-record.c

3822

pr_err("Failed to allocate thread mask\n");

tools/perf/builtin-record.c

3829

pr_err("Failed to initialize maps thread mask\n");

tools/perf/builtin-record.c

3834

pr_err("Failed to initialize affinity thread mask\n");

tools/perf/builtin-record.c

3841

pr_err("Empty maps mask: %s\n", maps_spec[s]);

tools/perf/builtin-record.c

3847

pr_err("Empty affinity mask: %s\n", affinity_spec[s]);

tools/perf/builtin-record.c

3855

pr_err("Intersecting maps mask: %s\n", maps_spec[s]);

tools/perf/builtin-record.c

3861

pr_err("Intersecting affinity mask: %s\n", affinity_spec[s]);

tools/perf/builtin-record.c

3873

pr_err("Failed to reallocate thread masks\n");

tools/perf/builtin-record.c

3888

pr_err("Failed to allocate thread mask\n");

tools/perf/builtin-record.c

3914

pr_err("Failed to allocate CPU topology\n");

tools/perf/builtin-record.c

393

pr_err("failed to sync perf data, error: %m\n");

tools/perf/builtin-record.c

3932

pr_err("Failed to allocate CPU topology\n");

tools/perf/builtin-record.c

3952

pr_err("Failed to allocate NUMA topology\n");

tools/perf/builtin-record.c

3958

pr_err("Failed to allocate NUMA spec\n");

tools/perf/builtin-record.c

3993

pr_err("Failed to reallocate maps spec\n");

tools/perf/builtin-record.c

4000

pr_err("Failed to allocate maps spec[%d]\n", nr_spec);

tools/perf/builtin-record.c

4006

pr_err("Invalid thread maps or affinity specs\n");

tools/perf/builtin-record.c

4013

pr_err("Failed to reallocate affinity spec\n");

tools/perf/builtin-record.c

4020

pr_err("Failed to allocate affinity spec[%d]\n", nr_spec);

tools/perf/builtin-record.c

4070

pr_err("--per-thread option is mutually exclusive to parallel streaming mode.\n");

tools/perf/builtin-record.c

4153

pr_err("Failed: latency profiling is not supported with system-wide collection.\n");

tools/perf/builtin-record.c

4182

pr_err("Kernel has no cgroup sampling support.\n");

tools/perf/builtin-record.c

4195

pr_err("--affinity option is mutually exclusive to parallel streaming mode.\n");

tools/perf/builtin-record.c

4199

pr_err("Asynchronous streaming mode (--aio) is mutually exclusive to parallel streaming mode.\n");

tools/perf/builtin-record.c

4358

pr_err("Couldn't create thread/CPU maps: %s\n",

tools/perf/builtin-record.c

4381

pr_err("record__config_text_poke failed, error %d\n", err);

tools/perf/builtin-record.c

4389

pr_err("record__config_off_cpu failed, error %d\n", err);

tools/perf/builtin-record.c

4401

pr_err("record__config_tracking_events failed, error %d\n", err);

tools/perf/builtin-record.c

4407

pr_err("Failed to initialize parallel data streaming masks\n");

tools/perf/builtin-record.c

711

pr_err("failed to signal wakeup fd, error: %m\n");

tools/perf/builtin-record.c

863

pr_err("AUX area tracing options are not available in parallel streaming mode.\n");

tools/perf/builtin-report.c

1009

pr_err("Missing parent thread of %d\n", thread__tid(a));

tools/perf/builtin-report.c

1014

pr_err("Missing parent thread of %d\n", thread__tid(b));

tools/perf/builtin-report.c

1209

pr_err("time quantum cannot be 0");

tools/perf/builtin-report.c

1230

pr_err("Cannot parse time quantum `%s'\n", arg);

tools/perf/builtin-report.c

1243

pr_err("Invalid --ignore-callees regex: %s\n%s", arg, buf);

tools/perf/builtin-report.c

151

pr_err("Not enough memory for report.sort_order\n");

tools/perf/builtin-report.c

1691

pr_err("branch and mem mode incompatible\n");

tools/perf/builtin-report.c

1727

pr_err("Error: --tasks and --mmaps can't be used together with --stats\n");

tools/perf/builtin-report.c

1747

pr_err("Error: Data type profiling is disabled due to missing DWARF support\n");

tools/perf/builtin-report.c

1881

pr_err("%s: failed to set libtraceevent function resolver\n",

tools/perf/builtin-report.c

253

pr_err("failed: wrong feature ID: %" PRI_lu64 "\n",

tools/perf/builtin-report.c

917

pr_err("Missing parent thread of %d\n", thread__tid(thread));

tools/perf/builtin-report.c

985

pr_err("Missing parent thread of %d\n", thread__tid(a));

tools/perf/builtin-report.c

996

pr_err("Missing parent thread of %d\n", thread__tid(b));

tools/perf/builtin-sched.c

1043

pr_err("No memory at %s\n", __func__);

tools/perf/builtin-sched.c

1060

pr_err("Non memory at %s", __func__);

tools/perf/builtin-sched.c

1160

pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta);

tools/perf/builtin-sched.c

1175

pr_err("out-event: Internal tree error");

tools/perf/builtin-sched.c

1188

pr_err("in-event: Internal tree error");

tools/perf/builtin-sched.c

1227

pr_err("in-event: Internal tree error");

tools/perf/builtin-sched.c

1262

pr_err("wakeup-event: Internal tree error");

tools/perf/builtin-sched.c

1330

pr_err("migration-event: Internal tree error");

tools/perf/builtin-sched.c

1672

pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta);

tools/perf/builtin-sched.c

1898

pr_err("Internal error: can't find thread\n");

tools/perf/builtin-sched.c

1950

pr_err("Failed to process events, error %d", err);

tools/perf/builtin-sched.c

2352

pr_err("Failed to resolve callchain. Skipping\n");

tools/perf/builtin-sched.c

2512

pr_err("Failed to get idle thread for cpu %d.\n", sample->cpu);

tools/perf/builtin-sched.c

2530

pr_err("Failed to get idle thread for cpu %d.\n", sample->cpu);

tools/perf/builtin-sched.c

2805

pr_err("problem processing %d event. skipping it\n",

tools/perf/builtin-sched.c

3217

pr_err("Failed to allocate memory for evsel runtime data\n");

tools/perf/builtin-sched.c

3330

pr_err("Invalid time string\n");

tools/perf/builtin-sched.c

3339

pr_err("Invalid prio string\n");

tools/perf/builtin-sched.c

3357

pr_err("No sched_switch events found. Have you run 'perf sched record'?\n");

tools/perf/builtin-sched.c

3381

pr_err("Failed to process events, error %d", err);

tools/perf/builtin-sched.c

3570

pr_err("failed to get cpus map from %s\n", sched->map.cpus_str);

tools/perf/builtin-sched.c

3588

pr_err("failed to get thread map from %s\n", sched->map.color_pids_str);

tools/perf/builtin-sched.c

3605

pr_err("failed to get thread map from %s\n", sched->map.color_cpus_str);

tools/perf/builtin-sched.c

3752

pr_err("failed to write perf data, error: %m\n");

tools/perf/builtin-sched.c

3773

pr_err("Failed to open %s\n", path);

tools/perf/builtin-sched.c

3795

pr_err("Failed to open %s\n", path);

tools/perf/builtin-sched.c

3831

pr_err("Perf session creation failed.\n");

tools/perf/builtin-sched.c

4281

pr_err("Failed because matching cpus not found for diff\n");

tools/perf/builtin-sched.c

4286

pr_err("Failed because nr_domains is not same for cpus\n");

tools/perf/builtin-sched.c

4312

pr_err("Failed because matching domain not found for diff\n");

tools/perf/builtin-sched.c

4499

pr_err("Perf session creation failed.\n");

tools/perf/builtin-sched.c

4520

pr_err("Data is not available\n");

tools/perf/builtin-sched.c

4555

pr_err("perf sched stats diff is not supported with more than 2 files.\n");

tools/perf/builtin-sched.c

4571

pr_err("Failed to open %s\n", data[0].path);

tools/perf/builtin-sched.c

4588

pr_err("Failed to open %s\n", data[1].path);

tools/perf/builtin-sched.c

4602

pr_err("Data is not available\n");

tools/perf/builtin-sched.c

4608

pr_err("Data is not available\n");

tools/perf/builtin-sched.c

4711

pr_err("Data is not available\n");

tools/perf/builtin-sched.c

4719

pr_err("Unable to generate cpu-domain relation info");

tools/perf/builtin-sched.c

5025

pr_err(" Error: -s and -[n|w] are mutually exclusive.\n");

tools/perf/builtin-sched.c

594

pr_err("Error: sys_perf_event_open() syscall returned "

tools/perf/builtin-sched.c

876

pr_err("hm, delta: %" PRIu64 " < 0 ?\n", delta);

tools/perf/builtin-script.c

2669

pr_err("Samples misordered, previous: %" PRIu64

tools/perf/builtin-script.c

2682

pr_err("problem processing %d event, skipping it.\n",

tools/perf/builtin-script.c

2751

pr_err("Samples misordered, previous: %" PRIu64

tools/perf/builtin-script.c

2764

pr_err("problem processing %d event, skipping it.\n",

tools/perf/builtin-script.c

3228

pr_err("Couldn't create the per event dump files\n");

tools/perf/builtin-script.c

3238

pr_err("Misordered timestamps: %" PRIu64 "\n", nr_unordered);

tools/perf/builtin-script.c

3667

pr_err("malloc failed\n");

tools/perf/builtin-script.c

3820

pr_err("malloc failed\n");

tools/perf/builtin-script.c

4318

pr_err("malloc failed\n");

tools/perf/builtin-script.c

4344

pr_err("malloc failed\n");

tools/perf/builtin-script.c

4382

pr_err("malloc failed\n");

tools/perf/builtin-script.c

4484

pr_err("%s: failed to set libtraceevent function resolver\n", __func__);

tools/perf/builtin-script.c

453

pr_err("Samples for '%s' event do not have %s attribute set. "

tools/perf/builtin-script.c

511

pr_err("Display of symbols requested but neither sample IP nor "

tools/perf/builtin-script.c

517

pr_err("Display of offsets requested but symbol is not"

tools/perf/builtin-script.c

523

pr_err("Display of DSO requested but no address to convert.\n");

tools/perf/builtin-script.c

527

pr_err("Display of source line number requested but sample IP is not\n"

tools/perf/builtin-script.c

534

pr_err("Display of branch stack assembler requested, but non all-branch filter set\n"

tools/perf/builtin-script.c

540

pr_err("Display of branch counter requested but it's not enabled\n"

tools/perf/builtin-script.c

582

pr_err("Hint: run 'perf record --all-cgroups ...'\n");

tools/perf/builtin-script.c

650

pr_err("%s events do not exist. "

tools/perf/builtin-script.c

710

pr_err("Can't provide 'tod' time, missing clock data. "

tools/perf/builtin-stat.c

1188

pr_err("--cgroup and --for-each-cgroup cannot be used together\n");

tools/perf/builtin-stat.c

1241

pr_err("Cache level must be of form L[1-%d], or l[1-%d]\n",

tools/perf/builtin-stat.c

1249

pr_err("Cache level must be of form L[1-%d], or l[1-%d]\n",

tools/perf/builtin-stat.c

1256

pr_err("perf only supports max cache level of %d.\n"

tools/perf/builtin-stat.c

1577

pr_err("cannot build %s map\n", aggr_mode__string[stat_config.aggr_mode]);

tools/perf/builtin-stat.c

1905

pr_err("cannot build %s map\n", aggr_mode__string[stat_config.aggr_mode]);

tools/perf/builtin-stat.c

1969

pr_err("Missing transaction metrics\n");

tools/perf/builtin-stat.c

1987

pr_err("freeze_on_smi is not supported.\n");

tools/perf/builtin-stat.c

1994

pr_err("Failed to set freeze_on_smi.\n");

tools/perf/builtin-stat.c

2002

pr_err("Missing smi metrics\n");

tools/perf/builtin-stat.c

2028

pr_err("Topdown requested but the topdown metric groups aren't present.\n"

tools/perf/builtin-stat.c

2034

pr_err("Invalid top-down metrics level. The max level is %u.\n", max_level);

tools/perf/builtin-stat.c

2163

pr_err("Cannot use -r option with perf stat record.\n");

tools/perf/builtin-stat.c

2169

pr_err("Perf session creation failed\n");

tools/perf/builtin-stat.c

2231

pr_err("cannot allocate aggr counts\n");

tools/perf/builtin-stat.c

251

pr_err("failed to write perf data, error: %m\n");

tools/perf/builtin-stat.c

2738

pr_err("Run count must be a positive number\n");

tools/perf/builtin-stat.c

2749

pr_err("failed to setup -r option");

tools/perf/builtin-stat.c

2835

pr_err("--cgroup and --for-each-cgroup cannot be used together\n");

tools/perf/builtin-stat.c

2871

pr_err("Problems finding threads of monitor\n");

tools/perf/builtin-stat.c

2898

pr_err("interval-count option should be used together with "

tools/perf/builtin-stat.c

2907

pr_err("timeout must be >= 10ms.\n");

tools/perf/builtin-stat.c

2916

pr_err("timeout option is not supported with interval-print.\n");

tools/perf/builtin-stat.c

3009

pr_err("failed to write stat round event\n");

tools/perf/builtin-stat.c

351

pr_err("failed to write stat event\n");

tools/perf/builtin-stat.c

478

pr_err("failed to write stat round event\n");

tools/perf/builtin-stat.c

921

pr_err("failed to set filter \"%s\" on event %s: %m\n",

tools/perf/builtin-stat.c

985

pr_err("Workload failed: %m\n");

tools/perf/builtin-timechart.c

1633

pr_err("Initializing session tracepoint handlers failed\n");

tools/perf/builtin-timechart.c

2013

pr_err("-P and -T options cannot be used at the same time.\n");

tools/perf/builtin-timechart.c

2024

pr_err("-P and -T options cannot be used at the same time.\n");

tools/perf/builtin-top.c

1061

pr_err("failed to set filter \"%s\" on event %s with %d (%s)\n",

tools/perf/builtin-top.c

1123

pr_err("failed to process events\n");

tools/perf/builtin-top.c

1165

pr_err("Can't parse sample, err = %d\n", ret);

tools/perf/builtin-top.c

1281

pr_err("cgroup tracking is not supported.\n");

tools/perf/builtin-top.c

134

pr_err("Can't annotate %s: No vmlinux file was found in the "

tools/perf/builtin-top.c

145

pr_err("Not enough memory for annotating '%s' symbol!\n",

tools/perf/builtin-top.c

157

pr_err("Couldn't annotate %s: %s\n", sym->name, msg);

tools/perf/builtin-top.c

1717

pr_err("Error: --hierarchy and --fields options cannot be used together\n");

tools/perf/builtin-top.c

1725

pr_err("Error: --stitch-lbr must be used with --call-graph lbr\n");

tools/perf/builtin-top.c

1730

pr_err("--cgroup and --all-cgroups cannot be used together\n");

tools/perf/builtin-top.c

1754

pr_err("PMU capability data is not available\n");

tools/perf/builtin-top.c

1865

pr_err("Couldn't create side band evlist.\n.");

tools/perf/builtin-top.c

1871

pr_err("Couldn't ask for PERF_RECORD_BPF_EVENT side band events.\n.");

tools/perf/builtin-top.c

232

pr_err("Not enough memory for annotating '%s' symbol!\n",

tools/perf/builtin-top.c

761

pr_err("Can't find guest [%d]'s kernel information\n",

tools/perf/builtin-top.c

769

pr_err("%u unprocessable samples recorded.\r",

tools/perf/builtin-top.c

848

pr_err("Problem incrementing symbol period, skipping event\n");

tools/perf/builtin-trace.c

3052

pr_err("Problem processing %s callchain, skipping...\n", evsel__name(evsel));

tools/perf/builtin-trace.c

3332

pr_err("Problem processing %s callchain, skipping...\n", evsel__name(evsel));

tools/perf/builtin-trace.c

3433

pr_err("Problem processing %s callchain, skipping...\n", evsel__name(evsel));

tools/perf/builtin-trace.c

3530

pr_err("Neither raw_syscalls nor syscalls events exist.\n");

tools/perf/builtin-trace.c

4298

pr_err("\"%s\" not found in \"%s\", can't set filter \"%s\"\n",

tools/perf/builtin-trace.c

4332

pr_err("\"%.*s\" not found for \"%s\" in \"%s\", can't set filter \"%s\"\n",

tools/perf/builtin-trace.c

4337

pr_err("No resolver (strtoul) for \"%s\" in \"%s\", can't set filter \"%s\"\n",

tools/perf/builtin-trace.c

4749

pr_err("Error during initialize raw_syscalls:sys_enter event\n");

tools/perf/builtin-trace.c

4760

pr_err("Error during initialize raw_syscalls:sys_exit event\n");

tools/perf/builtin-trace.c

4782

pr_err("Failed to process events, error %d", err);

tools/perf/builtin-trace.c

5295

pr_err("Unknown summary mode: %s\n", str);

tools/perf/builtin-trace.c

5310

pr_err("Not enough memory for %s\n", "trace.add_events");

tools/perf/builtin-trace.c

5505

pr_err("Not enough memory to run!\n");

tools/perf/builtin-trace.c

5575

pr_err("Error: --bpf-summary only works for system-wide mode.\n");

tools/perf/builtin-trace.c

5731

pr_err("Error: --summary-mode=cgroup only works with --bpf-summary\n");

tools/perf/perf.c

428

pr_err("FATAL: unable to run '%s'", argv[0]);

tools/perf/tests/backward-ring-buffer.c

146

pr_err("Unexpected counter: sample_count=%d, comm_count=%d\n",

tools/perf/tests/backward-ring-buffer.c

53

pr_err("Unexpected record of type %d\n", type);

tools/perf/tests/bp_account.c

169

pr_err("failed to create wp\n");

tools/perf/tests/builtin-test.c

227

pr_err("Leak of file descriptor %s that opened: '%s'\n", ent->d_name, path);

tools/perf/tests/builtin-test.c

589

pr_err("\nSignal (%d) while running tests.\nTerminating tests with the same signal\n",

tools/perf/tests/builtin-test.c

671

pr_err("Internal test harness failure. Completing any started tests:\n:");

tools/perf/tests/dwarf-unwind.c

196

pr_err("Could not get machine\n");

tools/perf/tests/dwarf-unwind.c

201

pr_err("Failed to create kernel maps\n");

tools/perf/tests/dwarf-unwind.c

210

pr_err("Could not get thread\n");

tools/perf/tests/hwmon_pmu.c

100

pr_err("Failed to open test hwmon directory \"%s\"\n", dir);

tools/perf/tests/hwmon_pmu.c

105

pr_err("Failed to open for writing file \"name\"\n");

tools/perf/tests/hwmon_pmu.c

111

pr_err("Failed to write to 'name' file\n");

tools/perf/tests/hwmon_pmu.c

122

pr_err("Failed to open for writing file \"%s\"\n", item->name);

tools/perf/tests/hwmon_pmu.c

127

pr_err("Failed to write to file \"%s\"\n", item->name);

tools/perf/tests/hwmon_pmu.c

137

pr_err("Test hwmon creation failed\n");

tools/perf/tests/hwmon_pmu.c

161

pr_err("evlist allocation failed\n");

tools/perf/tests/hwmon_pmu.c

44

pr_err("Failure to set up buffer for \"%s\"\n", dir);

tools/perf/tests/hwmon_pmu.c

49

pr_err("Failure to \"%s\"\n", buf);

tools/perf/tests/hwmon_pmu.c

82

pr_err("mkdtemp failed\n");

tools/perf/tests/hwmon_pmu.c

88

pr_err("Failed to open test directory \"%s\"\n", dir);

tools/perf/tests/hwmon_pmu.c

94

pr_err("Failed to mkdir hwmon directory\n");

tools/perf/tests/is_printable_array.c

32

pr_err("failed: test %u\n", i);

tools/perf/tests/mmap-basic.c

139

pr_err("Can't parse sample, err = %d\n", err);

tools/perf/tests/mmap-basic.c

229

pr_err("User space counter reading %" PRIu64 "\n", event);

tools/perf/tests/mmap-basic.c

231

pr_err("User space counter reading [Failed to create threads]\n");

tools/perf/tests/mmap-basic.c

267

pr_err("User space counter reading for PMU %s [Failed to allocate evsel]\n",

tools/perf/tests/mmap-basic.c

275

pr_err("User space counter reading for PMU %s [Failed to open evsel]\n",

tools/perf/tests/mmap-basic.c

283

pr_err("User space counter reading for PMU %s [Failed to mmap evsel]\n",

tools/perf/tests/mmap-basic.c

292

pr_err("User space counter reading for PMU %s [Failed to get mmaped address]\n",

tools/perf/tests/mmap-basic.c

304

pr_err("User space counter reading for PMU %s [Failed unexpected supported counter access %d %d]\n",

tools/perf/tests/mmap-basic.c

311

pr_err("User space counter reading for PMU %s [Failed unexpected unsupported counter access %d]\n",

tools/perf/tests/mmap-basic.c

318

pr_err("User space counter reading for PMU %s [Failed width not set %d]\n",

tools/perf/tests/mmap-basic.c

326

pr_err("User space counter reading for PMU %s [Failed read]\n", pmu->name);

tools/perf/tests/mmap-basic.c

346

pr_err("User space counter reading for PMU %s [Failed invalid counter data: end=%llu start=%llu last= %llu]\n",

tools/perf/tests/mmap-thread-lookup.c

67

pr_err("failed to notify\n");

tools/perf/tests/parse-events.c

2548

pr_err("Failed allocation");

tools/perf/tests/parse-events.c

2730

pr_err("pmu event name crossed PATH_MAX(%d) size\n", PATH_MAX);

tools/perf/tests/pmu-events.c

407

pr_err("testing event table: could not find event %s\n", pe->name);

tools/perf/tests/pmu-events.c

474

pr_err("testing event table: found %d, but expected %d\n",

tools/perf/tests/pmu-events.c

947

pr_err("expr__find_ids failed\n");

tools/perf/tests/pmu-events.c

962

pr_err("check_parse_fake failed\n");

tools/perf/tests/pmu-events.c

977

pr_err("expr__parse failed for %s\n", metric_name);

tools/perf/tests/pmu.c

103

pr_err("Failed to mkdir PMU format directory\n)");

tools/perf/tests/pmu.c

110

pr_err("Failure to set up path for \"%s\"\n", format->name);

tools/perf/tests/pmu.c

115

pr_err("Failed to open for writing file \"%s\"\n", name);

tools/perf/tests/pmu.c

120

pr_err("Failed to write to file \"%s\"\n", name);

tools/perf/tests/pmu.c

129

pr_err("Failed to mkdir PMU events directory\n");

tools/perf/tests/pmu.c

134

pr_err("Failed to open for writing file \"type\"\n");

tools/perf/tests/pmu.c

140

pr_err("Failed to write to 'test-event' file\n");

tools/perf/tests/pmu.c

148

pr_err("Test PMU creation failed\n");

tools/perf/tests/pmu.c

173

pr_err("Term parsing failed\n");

tools/perf/tests/pmu.c

181

pr_err("perf_pmu__config_terms failed");

tools/perf/tests/pmu.c

186

pr_err("Unexpected config value %llx\n", attr.config);

tools/perf/tests/pmu.c

190

pr_err("Unexpected config1 value %llx\n", attr.config1);

tools/perf/tests/pmu.c

194

pr_err("Unexpected config2 value %llx\n", attr.config2);

tools/perf/tests/pmu.c

224

pr_err("Failed allocation");

tools/perf/tests/pmu.c

28

pr_err("Failure to set up buffer for \"%s\"\n", dir);

tools/perf/tests/pmu.c

312

pr_err("Failed allocation");

tools/perf/tests/pmu.c

327

pr_err("Unexpected config value %llx\n", attr->config);

tools/perf/tests/pmu.c

33

pr_err("Failure to \"%s\"\n", buf);

tools/perf/tests/pmu.c

331

pr_err("Unexpected config1 value %llx\n", attr->config1);

tools/perf/tests/pmu.c

335

pr_err("Unexpected config2 value %llx\n", attr->config2);

tools/perf/tests/pmu.c

398

pr_err("Sysfs not mounted\n");

tools/perf/tests/pmu.c

405

pr_err("Error opening \"%s\"\n", path);

tools/perf/tests/pmu.c

436

pr_err("Invalid sysfs event name: %s/%s\n",

tools/perf/tests/pmu.c

73

pr_err("mkdtemp failed\n");

tools/perf/tests/pmu.c

79

pr_err("Failed to open test directory \"%s\"\n", dir);

tools/perf/tests/pmu.c

85

pr_err("Failed to mkdir PMU directory\n");

tools/perf/tests/pmu.c

90

pr_err("Failed to open for writing file \"type\"\n");

tools/perf/tests/pmu.c

96

pr_err("Failed to write to 'type' file\n");

tools/perf/tests/tests-scripts.c

148

pr_err("Out of memory while duplicating test script string\n");

tools/perf/tests/tests-scripts.c

183

pr_err("Failed to readlink %s", link);

tools/perf/tests/tests-scripts.c

191

pr_err("Out of memory while building script test suite list\n");

tools/perf/tests/tests-scripts.c

204

pr_err("Out of memory while building script test suite list\n");

tools/perf/tests/tests-scripts.c

215

pr_err("Out of memory while building script test suite list\n");

tools/perf/tests/tests-scripts.c

285

pr_err("Out of memory while building script test suite list\n");

tools/perf/tests/tool_pmu.c

18

pr_err("evlist allocation failed\n");

tools/perf/ui/browsers/scripts.c

182

pr_err("Failed to open directory '%s'", scripts_path);

tools/perf/ui/stdio/hist.c

412

pr_err("Bad callchain mode\n");

tools/perf/ui/tui/setup.c

161

pr_err("TUI initialization failed.\n");

tools/perf/util/addr2line.c

70

pr_err("Failed to allocate memory for addr2line");

tools/perf/util/annotate.c

1002

pr_err("%s: unsupported arch %d\n", __func__, e_machine);

tools/perf/util/annotate.c

2255

pr_err("Failed to add disassembler %d\n", dis);

tools/perf/util/annotate.c

2276

pr_err("Invalid disassembler '%.*s'\n", len, str);

tools/perf/util/annotate.c

2322

pr_err("Not enough memory for annotate.disassembler_style\n");

tools/perf/util/annotate.c

2328

pr_err("Not enough memory for annotate.objdump\n");

tools/perf/util/annotate.c

2334

pr_err("Not enough memory for annotate.addr2line\n");

tools/perf/util/annotate.c

2447

pr_err("--prefix-strip requires --prefix\n");

tools/perf/util/arm-spe-decoder/arm-spe-decoder.c

275

pr_err("Get packet error!\n");

tools/perf/util/arm-spe-decoder/arm-spe-decoder.c

290

pr_err("Get packet error!\n");

tools/perf/util/arm-spe.c

1400

pr_err("SPE trace requires ordered events\n");

tools/perf/util/arm-spe.c

1905

pr_err("Failed to parse Arm SPE metadata.\n");

tools/perf/util/arm-spe.c

493

pr_err("ARM SPE: failed to deliver event, error %d\n", ret);

tools/perf/util/auxtrace.c

1749

pr_err("Bad Instruction Tracing options '%s'\n", str);

tools/perf/util/auxtrace.c

2473

pr_err("#%d\t0x%"PRIx64"\t%c\t%s\n",

tools/perf/util/auxtrace.c

2478

pr_err("\t\twhich is near\t\t%s\n", name);

tools/perf/util/auxtrace.c

2487

pr_err("N'th occurrence (N=%d) of symbol '%s' not found.\n",

tools/perf/util/auxtrace.c

2490

pr_err("Global symbol '%s' not found.\n", sym_name);

tools/perf/util/auxtrace.c

2492

pr_err("Symbol '%s' not found.\n", sym_name);

tools/perf/util/auxtrace.c

2494

pr_err("Note that symbols must be functions.\n");

tools/perf/util/auxtrace.c

2514

pr_err("Failed to parse /proc/kallsyms\n");

tools/perf/util/auxtrace.c

2519

pr_err("Multiple kernel symbols with name '%s'\n", sym_name);

tools/perf/util/auxtrace.c

2522

pr_err("Disambiguate symbol name by inserting #n after the name e.g. %s #2\n",

tools/perf/util/auxtrace.c

2524

pr_err("Or select a global symbol by inserting #0 or #g or #G\n");

tools/perf/util/auxtrace.c

2529

pr_err("Kernel symbol lookup: ");

tools/perf/util/auxtrace.c

2567

pr_err("Failed to parse /proc/kallsyms\n");

tools/perf/util/auxtrace.c

2583

pr_err("Symbol '%s' (0x%"PRIx64") comes before '%s' (0x%"PRIx64")\n",

tools/perf/util/auxtrace.c

2586

pr_err("Symbol '%s' (0x%"PRIx64") comes before address 0x%"PRIx64")\n",

tools/perf/util/auxtrace.c

2600

pr_err("Kernel addresses are restricted. Unable to resolve kernel symbols.\n");

tools/perf/util/auxtrace.c

2634

pr_err("Cannot determine size of symbol '%s'\n",

tools/perf/util/auxtrace.c

2652

pr_err("File '%s' not found or has no symbols.\n", name);

tools/perf/util/auxtrace.c

2677

pr_err("Multiple symbols with name '%s'\n", sym_name);

tools/perf/util/auxtrace.c

2682

pr_err("#%d\t0x%"PRIx64"\t%c\t%s\n",

tools/perf/util/auxtrace.c

2690

pr_err("\t\twhich is near\t\t%s\n", sym->name);

tools/perf/util/auxtrace.c

2695

pr_err("Disambiguate symbol name by inserting #n after the name e.g. %s #2\n",

tools/perf/util/auxtrace.c

2697

pr_err("Or select a global symbol by inserting #0 or #g or #G\n");

tools/perf/util/auxtrace.c

2737

pr_err("Failed to determine filter for %s\nCannot determine file size.\n",

tools/perf/util/auxtrace.c

2762

pr_err("Failed to load symbols from: %s\n", filt->filename);

tools/perf/util/auxtrace.c

2840

pr_err("Error: number of address filters (%d) exceeds maximum (%d)\n",

tools/perf/util/auxtrace.c

2869

pr_err("Failed to parse address filter: '%s'\n", filter);

tools/perf/util/auxtrace.c

2870

pr_err("Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]\n");

tools/perf/util/auxtrace.c

2871

pr_err("Where multiple filters are separated by space or comma.\n");

tools/perf/util/auxtrace.c

584

pr_err("AUX area tracing is not supported on this architecture\n");

tools/perf/util/auxtrace.c

664

pr_err("No AUX area tracing to snapshot\n");

tools/perf/util/auxtrace.c

724

pr_err("Cannot add AUX area sampling to an AUX area event\n");

tools/perf/util/auxtrace.c

726

pr_err("Cannot add AUX area sampling to a group leader\n");

tools/perf/util/auxtrace.c

731

pr_err("AUX area sample size %u too big, max. %d\n",

tools/perf/util/auxtrace.c

737

pr_err("Cannot add AUX area sampling because group leader is not an AUX area event\n");

tools/perf/util/auxtrace.c

748

pr_err("AUX area sampling requires an AUX area event group leader plus other events to which to add samples\n");

tools/perf/util/auxtrace.c

753

pr_err("AUX area sampling is not supported by kernel\n");

tools/perf/util/auxtrace.c

776

pr_err("No AUX area event to sample\n");

tools/perf/util/auxtrace.c

782

pr_err("Bad AUX area sampling option: '%s'\n", str);

tools/perf/util/auxtrace.c

820

pr_err("No AUX area event to sample\n");

tools/perf/util/auxtrace.c

872

pr_err("Bad aux-action '%s'\n", term->val.str);

tools/perf/util/auxtrace.c

876

pr_err("aux-action '%s' can only be used with AUX area event\n",

tools/perf/util/auxtrace.c

881

pr_err("aux-action '%s' cannot be used for AUX area event itself\n",

tools/perf/util/auxtrace.c

891

pr_err("Events with aux-action must have AUX area event group leader\n");

tools/perf/util/bpf-event.c

828

pr_err("%s: failed to synthesize bpf images: %m\n", __func__);

tools/perf/util/bpf-filter.c

146

pr_err("Error: %s event does not have sample flags %d\n",

tools/perf/util/bpf-filter.c

151

pr_err("Error: %s event does not have %s\n", evsel__name(evsel), info->name);

tools/perf/util/bpf-filter.c

153

pr_err(" Hint: please add %s option to perf record\n", info->option);

tools/perf/util/bpf-filter.c

294

pr_err("cannot get fd for 'event_hash' map\n");

tools/perf/util/bpf-filter.c

303

pr_err("Failed to get the event id\n");

tools/perf/util/bpf-filter.c

361

pr_err("cannot get fd for 'filters' map\n");

tools/perf/util/bpf-filter.c

373

pr_err("Too many users for the filter map\n");

tools/perf/util/bpf-filter.c

379

pr_err("Cannot save pinned filter index\n");

tools/perf/util/bpf-filter.c

388

pr_err("Cannot update the event hash\n");

tools/perf/util/bpf-filter.c

396

pr_err("Cannot get the thread list of the event\n");

tools/perf/util/bpf-filter.c

403

pr_err("cannot get fd for 'idx_hash' map\n");

tools/perf/util/bpf-filter.c

429

pr_err("Failed to update the idx_hash\n");

tools/perf/util/bpf-filter.c

468

pr_err("Failed to process filter entries\n");

tools/perf/util/bpf-filter.c

500

pr_err("Failed to attach perf sample-filter\n");

tools/perf/util/bpf-filter.c

515

pr_err("Failed to load perf sample-filter BPF skeleton\n");

tools/perf/util/bpf-filter.c

525

pr_err("Failed to update the filter map\n");

tools/perf/util/bpf-filter.c

535

pr_err("Failed to attach perf sample-filter program\n");

tools/perf/util/bpf-filter.c

647

pr_err("Error: BPF filter only works for %s!\n"

tools/perf/util/bpf-filter.c

682

pr_err("Failed to open perf sample-filter BPF skeleton\n");

tools/perf/util/bpf-filter.c

695

pr_err("Failed to load perf sample-filter BPF skeleton\n");

tools/perf/util/bpf-filter.c

702

pr_err("Failed to allocate pathname in the BPF-fs\n");

tools/perf/util/bpf-filter.c

708

pr_err("Failed to pin BPF filter objects\n");

tools/perf/util/bpf-filter.c

775

pr_err("Failed to open perf sample-filter BPF skeleton\n");

tools/perf/util/bpf-filter.c

782

pr_err("Failed to allocate pathname in the BPF-fs\n");

tools/perf/util/bpf-filter.h

44

pr_err("Error: BPF filter is requested but perf is not built with BPF.\n"

tools/perf/util/bpf_counter.c

171

pr_err("Failed to open fd for bpf prog %u\n", prog_id);

tools/perf/util/bpf_counter.c

182

pr_err("Failed to open bpf skeleton\n");

tools/perf/util/bpf_counter.c

194

pr_err("Failed to get program name for bpf prog %u. Does it have BTF?\n", prog_id);

tools/perf/util/bpf_counter.c

201

pr_err("bpf_program__set_attach_target failed.\n"

tools/perf/util/bpf_counter.c

209

pr_err("bpf_prog_profiler_bpf__load failed\n");

tools/perf/util/bpf_counter.c

241

pr_err("Failed to parse bpf prog ids %s\n",

tools/perf/util/bpf_counter.c

316

pr_err("failed to read value\n");

tools/perf/util/bpf_counter.c

430

pr_err("bpf managed perf events do not yet support groups.\n");

tools/perf/util/bpf_counter.c

448

pr_err("bpf managed perf events do not yet support these targets.\n");

tools/perf/util/bpf_counter.c

466

pr_err("Failed to open leader skeleton\n");

tools/perf/util/bpf_counter.c

473

pr_err("Failed to load leader skeleton\n");

tools/perf/util/bpf_counter.c

479

pr_err("Failed to attach leader program\n");

tools/perf/util/bpf_counter.c

552

pr_err("Failed to lock perf_event_attr map\n");

tools/perf/util/bpf_counter.c

587

pr_err("The kernel does not support test_run for raw_tp BPF programs.\n"

tools/perf/util/bpf_counter.c

596

pr_err("Failed to open follower skeleton\n");

tools/perf/util/bpf_counter.c

612

pr_err("Failed to load follower skeleton\n");

tools/perf/util/bpf_counter_cgroup.c

112

pr_err("Failed to open cgroup skeleton\n");

tools/perf/util/bpf_counter_cgroup.c

119

pr_err("Failed to load cgroup skeleton\n");

tools/perf/util/bpf_counter_cgroup.c

127

pr_err("Failed to open cgroup switches event\n");

tools/perf/util/bpf_counter_cgroup.c

135

pr_err("Failed to attach cgroup program\n");

tools/perf/util/bpf_counter_cgroup.c

181

pr_err("Failed to update cgroup index map\n");

tools/perf/util/bpf_counter_cgroup.c

294

pr_err("bpf map lookup failed: idx=%u, event=%s, cgrp=%s\n",

tools/perf/util/bpf_counter_cgroup.c

83

pr_err("Failed to open cgroup skeleton\n");

tools/perf/util/bpf_counter_cgroup.c

89

pr_err("Failed to load cgroup skeleton with max events %d.\n",

tools/perf/util/bpf_ftrace.c

113

pr_err("Failed to attach fentry program\n");

tools/perf/util/bpf_ftrace.c

121

pr_err("Failed to attach fexit program\n");

tools/perf/util/bpf_ftrace.c

133

pr_err("Failed to attach first tracepoint program\n");

tools/perf/util/bpf_ftrace.c

143

pr_err("Failed to attach second tracepoint program\n");

tools/perf/util/bpf_ftrace.c

30

pr_err("ERROR: Too many target functions.\n");

tools/perf/util/bpf_ftrace.c

42

pr_err("ERROR: Needs two target events.\n");

tools/perf/util/bpf_ftrace.c

49

pr_err("Failed to open func latency skeleton\n");

tools/perf/util/bpf_ftrace.c

79

pr_err("Failed to load func latency skeleton\n");

tools/perf/util/bpf_kwork.c

173

pr_err("Requested cpu %d too large\n", cpu.cpu);

tools/perf/util/bpf_kwork.c

185

pr_err("Requested name filter %s too large, limit to %d\n",

tools/perf/util/bpf_kwork.c

227

pr_err("Unsupported bpf trace class %s\n", class->name);

tools/perf/util/bpf_kwork.c

83

pr_err("Failed to copy work name\n");

tools/perf/util/bpf_kwork_top.c

148

pr_err("Requested cpu %d too large\n", cpu.cpu);

tools/perf/util/bpf_kwork_top.c

183

pr_err("Unsupported bpf trace class %s\n", class->name);

tools/perf/util/bpf_lock_contention.c

195

pr_err("Failed to open lock-contention BPF skeleton\n");

tools/perf/util/bpf_lock_contention.c

319

pr_err("Failed to load lock-contention BPF skeleton\n");

tools/perf/util/bpf_off_cpu.c

157

pr_err("Failed to config off-cpu BPF event\n");

tools/perf/util/bpf_off_cpu.c

163

pr_err("Failed to open off-cpu BPF skeleton\n");

tools/perf/util/bpf_off_cpu.c

177

pr_err("Failed to create a strlist for pid\n");

tools/perf/util/bpf_off_cpu.c

230

pr_err("Failed to load off-cpu skeleton\n");

tools/perf/util/bpf_off_cpu.c

288

pr_err("Failed to read cgroup id of %s\n",

tools/perf/util/bpf_off_cpu.c

301

pr_err("Failed to attach off-cpu BPF skeleton\n");

tools/perf/util/bpf_off_cpu.c

307

pr_err("Failed to attach off-cpu skeleton\n");

tools/perf/util/bpf_off_cpu.c

339

pr_err("%s evsel not found\n", OFFCPU_EVENT);

tools/perf/util/bpf_off_cpu.c

346

pr_err("not supported sample type: %llx\n",

tools/perf/util/bpf_off_cpu.c

419

pr_err("failed to write perf data, error: %m\n");

tools/perf/util/bpf_off_cpu.c

51

pr_err("Failed to open off-cpu event\n");

tools/perf/util/bpf_off_cpu.c

87

pr_err("%s evsel not found\n", OFFCPU_EVENT);

tools/perf/util/bpf_off_cpu.c

99

pr_err("Failed to update perf event map for direct off-cpu dumping\n");

tools/perf/util/bpf_trace_augment.c

111

pr_err("Error: failed to get syscall or beauty map fd\n");

tools/perf/util/bpf_trace_augment.c

50

pr_err("ERROR: Setup BPF output event failed: %d\n", err);

tools/perf/util/build-id.c

66

pr_err("problem processing %d event, skipping it.\n",

tools/perf/util/build-id.c

730

pr_err("Can't read link: %s\n", linkname);

tools/perf/util/callchain.c

1619

pr_err("callchain cursor creation failed");

tools/perf/util/callchain.c

165

pr_err("callchain: Incorrect stack dump size (max %ld): %s\n",

tools/perf/util/callchain.c

237

pr_err("Can't register callchain params\n");

tools/perf/util/callchain.c

310

pr_err("callchain: No more arguments "

tools/perf/util/callchain.c

314

pr_err("callchain: Unknown --call-graph option "

tools/perf/util/callchain.c

324

pr_err("callchain: deferred callchain only works with FP\n");

tools/perf/util/callchain.c

354

pr_err("Invalid callchain mode: %s\n", value);

tools/perf/util/callchain.c

361

pr_err("Invalid callchain order: %s\n", value);

tools/perf/util/callchain.c

368

pr_err("Invalid callchain sort key: %s\n", value);

tools/perf/util/callchain.c

374

pr_err("Invalid callchain threshold: %s\n", value);

tools/perf/util/callchain.c

381

pr_err("Invalid callchain print limit: %s\n", value);

tools/perf/util/config.c

313

pr_err("bad config file line %d in %s\n", config_linenr, config_file_name);

tools/perf/util/config.c

446

pr_err("Invalid buildid directory!\n");

tools/perf/util/config.c

836

pr_err("Error in the given config file: wrong config key-value pair %s=%s\n",

tools/perf/util/config.c

913

pr_err("Missing value for '%s'", var);

tools/perf/util/cpumap.c

117

pr_err("Invalid cpumap entry %d\n", cpu + cpus_per_i);

tools/perf/util/cpumap.c

145

pr_err("Invalid cpumap entry %d\n", cpu);

tools/perf/util/cpumap.c

164

pr_err("cpu_map__new_data unknown type %d\n", data->type);

tools/perf/util/cpumap.c

461

pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);

tools/perf/util/cpumap.c

474

pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);

tools/perf/util/cpumap.c

481

pr_err("Read out of bounds max cpus of %d\n", max);

tools/perf/util/cpumap.c

488

pr_err("Failed to read max cpus, using default of %d\n", max_cpu_num.cpu);

tools/perf/util/cpumap.c

508

pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);

tools/perf/util/cpumap.c

516

pr_err("Failed to read max nodes, using default of %d\n", max_node_num);

tools/perf/util/cpumap.c

563

pr_err("%s: calloc failed\n", __func__);

tools/perf/util/cpumap.c

593

pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);

tools/perf/util/cpumap.c

608

pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);

tools/perf/util/cpumap.c

84

pr_err("Invalid cpumap entry %u\n", data->cpus_data.cpu[i]);

tools/perf/util/cputopo.c

249

pr_err("Error creating CPU topology");

tools/perf/util/cs-etm-base.c

182

pr_err("\nCS ETM Trace: Unknown Header Version = %#" PRIx64, hdr_version);

tools/perf/util/cs-etm-base.c

183

pr_err(", version supported <= %x\n", CS_HEADER_CURRENT_VERSION);

tools/perf/util/cs-etm-decoder/cs-etm-decoder.c

359

pr_err("Timestamp calculation underflow at Idx:%" OCSD_TRC_IDX_STR "\n", indx);

tools/perf/util/cs-etm.c

1148

pr_err("CS ETM Trace: Debug data not found for address %#"PRIx64" in %s\n",

tools/perf/util/cs-etm.c

1604

pr_err(

tools/perf/util/cs-etm.c

1679

pr_err(

tools/perf/util/cs-etm.c

2475

pr_err("CS ETM Trace: empty packet\n");

tools/perf/util/cs-etm.c

256

pr_err("CS_ETM: overlapping Trace IDs aren't currently supported in per-thread mode\n");

tools/perf/util/cs-etm.c

258

pr_err("CS_ETM: map mismatch between HW_ID packet CPU and Trace ID\n");

tools/perf/util/cs-etm.c

269

pr_err("CS_ETM: mismatch between CPU trace ID and HW_ID packet ID\n");

tools/perf/util/cs-etm.c

2820

pr_err("CoreSight ETM Trace requires ordered events\n");

tools/perf/util/cs-etm.c

3054

pr_err("CS ETM: Inconsistent per-thread/per-cpu mode.\n");

tools/perf/util/cs-etm.c

3102

pr_err("CS_ETM: mixed formatted and unformatted trace not supported\n");

tools/perf/util/cs-etm.c

3178

pr_err("CS ETM: Couldn't find auxtrace buffer for aux_offset: %#"PRI_lx64

tools/perf/util/cs-etm.c

360

pr_err("CS_ETM: mismatch between sink IDs\n");

tools/perf/util/cs-etm.c

380

pr_err("CS_ETM: Can't link populated trace ID lists\n");

tools/perf/util/cs-etm.c

494

pr_err("CS ETM Trace: PERF_RECORD_AUX_OUTPUT_HW_ID version %d not supported. Please update Perf.\n",

tools/perf/util/cs-etm.c

515

pr_err("CS_ETM: no CPU AUX_OUTPUT_HW_ID sample. Use compatible perf to record.");

tools/perf/util/cs-etm.h

277

pr_err("\nCS ETM Trace: OpenCSD is not linked in, please recompile with CORESIGHT=1\n");

tools/perf/util/data-convert-bt.c

1014

pr_err("Failed to fix invalid identifier.");

tools/perf/util/data-convert-bt.c

1021

pr_err("Failed to create dup name for '%s'\n", field->name);

tools/perf/util/data-convert-bt.c

1067

pr_err("Failed to add field '%s': %d\n",

tools/perf/util/data-convert-bt.c

1133

pr_err("Failed to add field '%s';\n", n); \

tools/perf/util/data-convert-bt.c

119

pr_err("failed to create a field %s\n", name);

tools/perf/util/data-convert-bt.c

1222

pr_err("Failed to add event '%s'.\n", name);

tools/perf/util/data-convert-bt.c

1244

pr_err("Failed to add field '%s';\n", #n);\

tools/perf/util/data-convert-bt.c

126

pr_err("failed to set field value %s\n", name);

tools/perf/util/data-convert-bt.c

132

pr_err("failed to set field value %s\n", name);

tools/perf/util/data-convert-bt.c

1365

pr_err("Failed to allocate streams.\n");

tools/perf/util/data-convert-bt.c

139

pr_err("failed to set payload %s\n", name);

tools/perf/util/data-convert-bt.c

1466

pr_err("Can't provide --tod time, missing clock data. "

tools/perf/util/data-convert-bt.c

1552

pr_err("Failed to create data types.\n");

tools/perf/util/data-convert-bt.c

1638

pr_err("Failed to setup CTF writer.\n");

tools/perf/util/data-convert-bt.c

1744

pr_err("Error during conversion.\n");

tools/perf/util/data-convert-bt.c

1779

pr_err("Error during conversion setup.\n");

tools/perf/util/data-convert-bt.c

179

pr_err("failed to create a field %s\n", name);

tools/perf/util/data-convert-bt.c

185

pr_err("failed to set value %s\n", name);

tools/perf/util/data-convert-bt.c

191

pr_err("failed to set payload %s\n", name);

tools/perf/util/data-convert-bt.c

282

pr_err("failed to set unprintable string '%s'\n", string);

tools/perf/util/data-convert-bt.c

343

pr_err("Failed to create array type %s\n", name);

tools/perf/util/data-convert-bt.c

363

pr_err("failed to create a field %s\n", name);

tools/perf/util/data-convert-bt.c

385

pr_err("failed to set file value %s\n", name);

tools/perf/util/data-convert-bt.c

391

pr_err("failed to set payload %s\n", name);

tools/perf/util/data-convert-bt.c

400

pr_err("Failed add payload array %s\n", name);

tools/perf/util/data-convert-bt.c

469

pr_err("failed to create 'raw_len' for bpf output event\n");

tools/perf/util/data-convert-bt.c

476

pr_err("failed to set field value for raw_len\n");

tools/perf/util/data-convert-bt.c

481

pr_err("failed to set payload to raw_len\n");

tools/perf/util/data-convert-bt.c

488

pr_err("failed to create 'raw_data' for bpf output event\n");

tools/perf/util/data-convert-bt.c

495

pr_err("failed to set length of 'raw_data'\n");

tools/perf/util/data-convert-bt.c

508

pr_err("failed to set raw_data[%d]\n", i);

tools/perf/util/data-convert-bt.c

515

pr_err("failed to set payload for raw_data\n");

tools/perf/util/data-convert-bt.c

543

pr_err("failed to create 'perf_callchain_size' for callchain output event\n");

tools/perf/util/data-convert-bt.c

550

pr_err("failed to set field value for perf_callchain_size\n");

tools/perf/util/data-convert-bt.c

555

pr_err("failed to set payload to perf_callchain_size\n");

tools/perf/util/data-convert-bt.c

563

pr_err("failed to create 'perf_callchain' for callchain output event\n");

tools/perf/util/data-convert-bt.c

570

pr_err("failed to set length of 'perf_callchain'\n");

tools/perf/util/data-convert-bt.c

583

pr_err("failed to set callchain[%d]\n", i);

tools/perf/util/data-convert-bt.c

590

pr_err("failed to set payload for raw_data\n");

tools/perf/util/data-convert-bt.c

687

pr_err("CTF stream %d flush failed\n", cs->cpu);

tools/perf/util/data-convert-bt.c

708

pr_err("Failed to allocate ctf stream\n");

tools/perf/util/data-convert-bt.c

714

pr_err("Failed to create CTF stream\n");

tools/perf/util/data-convert-bt.c

720

pr_err("Failed to obtain packet context\n");

tools/perf/util/data-convert-bt.c

727

pr_err("Failed to obtain cpu field\n");

tools/perf/util/data-convert-bt.c

733

pr_err("Failed to update CPU number\n");

tools/perf/util/data-convert-bt.c

782

pr_err("Event was recorded for CPU %d, limit is at %d.\n",

tools/perf/util/data-convert-bt.c

836

pr_err("Failed to create an CTF event\n");

tools/perf/util/data-convert-bt.c

903

pr_err("Failed to create an CTF event\n"); \

tools/perf/util/data-convert-json.c

173

pr_err("Sample resolution failed!\n");

tools/perf/util/data-convert-json.c

382

pr_err("--all is currently unsupported for JSON output.\n");

tools/perf/util/data-convert-json.c

386

pr_err("--tod is currently unsupported for JSON output.\n");

tools/perf/util/data-convert-json.c

393

pr_err("Output file exists. Use --force to overwrite it.\n");

tools/perf/util/data-convert-json.c

395

pr_err("Error opening output file!\n");

tools/perf/util/data.c

217

pr_err("Can't remove old data: Unknown file found (%s)\n", oldname);

tools/perf/util/data.c

219

pr_err("Can't remove old data: %m (%s)\n", oldname);

tools/perf/util/data.c

224

pr_err("Can't move data: %m (%s to %s)\n", data->path, oldname);

tools/perf/util/data.c

252

pr_err("failed to open %s: %m", data->file.path);

tools/perf/util/data.c

254

pr_err(" (try 'perf record' first)");

tools/perf/util/data.c

255

pr_err("\n");

tools/perf/util/data.c

263

pr_err("File %s not owned by current user or root (use -f to override)\n",

tools/perf/util/data.c

287

pr_err("failed to open %s : %m\n", data->file.path);

tools/perf/util/disasm.c

1346

pr_err("Failure allocating memory for tab expansion\n");

tools/perf/util/disasm.c

1447

pr_err("Failure allocating memory for the command to run\n");

tools/perf/util/disasm.c

1463

pr_err("Failure starting to run %s\n", command);

tools/perf/util/disasm.c

1470

pr_err("Failure creating FILE stream for %s\n", command);

tools/perf/util/disasm.c

1517

pr_err("Error running %s\n", command);

tools/perf/util/disasm.c

1521

pr_err("No output from %s\n", command);

tools/perf/util/disasm.c

184

pr_err("%s: failed to initialize %s (%u) arch priv area\n",

tools/perf/util/dlfilter.c

402

pr_err("dlopen failed for: '%s'\n", d->file);

tools/perf/util/drm_pmu.c

110

pr_err("Unable to encode DRM PMU type for %s\n", name);

tools/perf/util/drm_pmu.c

550

pr_err("Unexpected bytes unit '%s'\n", unit_ptr);

tools/perf/util/drm_pmu.c

566

pr_err("Unexpected hz unit '%s'\n", unit_ptr);

tools/perf/util/dso.c

1128

pr_err("dso cache fstat failed: %m\n");

tools/perf/util/dso.c

1673

pr_err("DSO %s is still in rbtree when being deleted!\n", dso__long_name(dso));

tools/perf/util/dso.c

1733

pr_err("unrecognized DSO data encoding %d\n", eidata);

tools/perf/util/dso.c

312

pr_err("Failed to check whether %s is a kernel module or not. Assume it is.",

tools/perf/util/dso.c

718

pr_err("failed to get fd limit\n");

tools/perf/util/dwarf-regs.c

149

pr_err("ELF MACHINE %x is not supported.\n", machine);

tools/perf/util/dwarf-regs.c

227

pr_err("ELF MACHINE %x is not supported.\n", machine);

tools/perf/util/dwarf-regs.c

69

pr_err("ELF MACHINE %x is not supported.\n", machine);

tools/perf/util/evlist.c

1963

pr_err("Failed to open '%s': %m\n", s);

tools/perf/util/evlist.c

1973

pr_err("Failed to open '%s': %m\n", p);

tools/perf/util/evlist.c

2034

pr_err("Failed to add ctl fd entry: %m\n");

tools/perf/util/evlist.c

2093

pr_err("Failed to read from ctlfd %d: %m\n", evlist->ctl_fd.fd);

tools/perf/util/evlist.c

2137

pr_err("failed to write to ctl_ack_fd %d: %m\n", evlist->ctl_fd.ack);

tools/perf/util/evlist.c

2406

pr_err("timerfd_create failed: %m\n");

tools/perf/util/evlist.c

2441

pr_err("timerfd_settime failed: %m\n");

tools/perf/util/evlist.c

981

pr_err("Invalid argument for --mmap_pages/-m\n");

tools/perf/util/evsel.c

1120

pr_err("Invalid ratio-to-prev value %lf\n", rtp);

tools/perf/util/evsel.c

1124

pr_err("Invalid use of ratio-to-prev term without preceding element in group\n");

tools/perf/util/evsel.c

1128

pr_err("Event using ratio-to-prev term must have a core PMU\n");

tools/perf/util/evsel.c

1134

pr_err("Previous event does not exist.\n");

tools/perf/util/evsel.c

1139

pr_err("Compared events (\"%s\", \"%s\") must have same PMU\n",

tools/perf/util/evsel.c

1164

pr_err("Event period term or count (-c) must be set when using ratio-to-prev term.\n");

tools/perf/util/evsel.c

1286

pr_err("per-event callgraph setting for %s failed. "

tools/perf/util/evsel.c

1374

pr_err("Unknown format value: %d\n", format->value);

tools/perf/util/evsel.c

1400

pr_err("Unknown/empty format name: %s\n", config_name);

tools/perf/util/evsel.c

1427

pr_err("Unknown format value: %d\n", format->value);

tools/perf/util/evsel.c

201

pr_err("test attr FAILED");

tools/perf/util/evsel.c

2891

pr_err("failed to attach bpf fd %d: %m\n",

tools/perf/util/evsel.c

653

pr_err("Error getting tracepoint format '%s': %m\n",

tools/perf/util/expr.c

409

pr_err("Failure to read '%s'", literal);

tools/perf/util/expr.c

411

pr_err("Unrecognized literal '%s'", literal);

tools/perf/util/expr.y

118

pr_err("Error creating IDs for '%s'", id);

tools/perf/util/header.c

1428

pr_err("Failed to write MEM_TOPOLOGY, size %zd nodes\n", size);

tools/perf/util/header.c

1647

pr_err("Failed to open /proc/schedstat\n");

tools/perf/util/header.c

3097

pr_err("Failed to process auxtrace index\n");

tools/perf/util/header.c

3996

pr_err("File contains data but offset unknown\n");

tools/perf/util/header.c

4318

pr_err("Perf file header corrupt: header overlaps attrs\n");

tools/perf/util/header.c

4323

pr_err("Perf file header corrupt: header overlaps data\n");

tools/perf/util/header.c

4331

pr_err("Perf file header corrupt: Attributes and data overlap\n");

tools/perf/util/header.c

4570

pr_err("In-place update not supported when byte-swapping is required\n");

tools/perf/util/header.c

4587

pr_err("ERROR: The %s file's attr size field is 0 which is unexpected.\n"

tools/perf/util/header.c

4838

pr_err("failed to get event_update cpus\n");

tools/perf/util/header.c

4874

pr_err("%s: reading input file", __func__);

tools/perf/util/header.c

4880

pr_err("%s: repiping tracing data padding", __func__);

tools/perf/util/header.c

4886

pr_err("%s: tracing data size mismatch", __func__);

tools/perf/util/header.c

935

pr_err("Failed to write auxtrace index\n");

tools/perf/util/hwmon_pmu.c

353

pr_err("Unable to encode hwmon type from %s in valid PMU type\n", sysfs_name);

tools/perf/util/intel-bts.c

142

pr_err("Intel BTS: failed to deliver error event, error %d\n",

tools/perf/util/intel-bts.c

313

pr_err("Intel BTS: failed to deliver branch event, error %d\n",

tools/perf/util/intel-bts.c

358

pr_err("Intel BTS: failed to deliver error event, error %d\n",

tools/perf/util/intel-bts.c

607

pr_err("Intel BTS requires ordered events\n");

tools/perf/util/intel-bts.c

790

pr_err("%s: failed to synthesize 'branches' event type\n",

tools/perf/util/intel-pt.c

1760

pr_err("Intel PT: failed to deliver event, error %d\n", ret);

tools/perf/util/intel-pt.c

2540

pr_err("Intel PT missing data_src info\n");

tools/perf/util/intel-pt.c

2585

pr_err("PEBS-via-PT record with no applicable_counters\n");

tools/perf/util/intel-pt.c

2593

pr_err("PEBS-via-PT record with no matching event, hw_id %d\n",

tools/perf/util/intel-pt.c

2721

pr_err("Intel Processor Trace: failed to deliver error event, error %d\n",

tools/perf/util/intel-pt.c

3525

pr_err("Expecting CPU-wide context switch event\n");

tools/perf/util/intel-pt.c

3619

pr_err("Bad AUX output hardware ID\n");

tools/perf/util/intel-pt.c

3713

pr_err("Intel Processor Trace requires ordered events\n");

tools/perf/util/intel-pt.c

3922

pr_err("%s: failed to synthesize '%s' event type\n",

tools/perf/util/intel-pt.c

4352

pr_err("Failed to parse VM Time Correlation options\n");

tools/perf/util/intel-pt.c

4505

pr_err("%s: bad filter string length\n", __func__);

tools/perf/util/intel-pt.c

4517

pr_err("%s: filter string not null terminated\n", __func__);

tools/perf/util/intel-pt.c

4545

pr_err("Intel PT has no time information for VM Time Correlation\n");

tools/perf/util/intel-pt.c

4550

pr_err("Time ranges cannot be specified with VM Time Correlation\n");

tools/perf/util/intel-pt.c

4556

pr_err("MTC packets must have been enabled for VM Time Correlation\n");

tools/perf/util/intel-pt.c

4595

pr_err("%s: missing sched_switch event\n", __func__);

tools/perf/util/intel-pt.c

4601

pr_err("%s: missing context_switch attribute flag\n", __func__);

tools/perf/util/intel-tpebs.c

273

pr_err("perf record control write control message '%s' failed\n", msg);

tools/perf/util/intel-tpebs.c

300

pr_err("tpebs failed: perf record ack timeout for '%s'\n", msg);

tools/perf/util/intel-tpebs.c

311

pr_err("tpebs failed: did not received an ack for '%s'\n", msg);

tools/perf/util/intel-tpebs.c

320

pr_err("tpebs: perf record control ack failed\n");

tools/perf/util/intel-tpebs.c

386

pr_err("Tpebs event modifier broken '%s'\n", evsel->name);

tools/perf/util/intel-tpebs.c

440

pr_err("Bad evsel for tpebs find '%s'\n", evsel->name);

tools/perf/util/intel-tpebs.c

526

pr_err("tpebs: Failed to create control fifo");

tools/perf/util/intel-tpebs.c

531

pr_err("tpebs: Failed to create control fifo");

tools/perf/util/intel-tpebs.c

544

pr_err("Could not create thread to process sample data.\n");

tools/perf/util/iostat.c

17

pr_err("iostat mode is not supported on current platform\n");

tools/perf/util/jitdump.c

197

pr_err("wrong jitdump version %u, expected " __stringify(JITHEADER_VERSION),

tools/perf/util/jitdump.c

203

pr_err("jitdump file contains invalid or unsupported flags 0x%llx\n",

tools/perf/util/jitdump.c

209

pr_err("jitdump file uses arch timestamps but there is no timestamp conversion\n");

tools/perf/util/jitdump.c

217

pr_err("error, jitted code must be sampled with perf record -k 1\n");

tools/perf/util/jitdump.c

823

pr_err("%s: thread %d not found or created\n", __func__, pid);

tools/perf/util/jitdump.c

862

pr_err("problem processing JIT mmap event, skipping it.\n");

tools/perf/util/kvm-stat.c

104

pr_err("Unsupported kvm-stat host %d\n", e_machine);

tools/perf/util/kvm-stat.c

123

pr_err("Unsupported kvm-stat host %d\n", e_machine);

tools/perf/util/kvm-stat.c

146

pr_err("Unsupported kvm-stat host %d\n", e_machine);

tools/perf/util/kvm-stat.c

167

pr_err("Unsupported kvm-stat host %d\n", e_machine);

tools/perf/util/kvm-stat.c

187

pr_err("Unsupported kvm-stat host %d\n", e_machine);

tools/perf/util/kvm-stat.c

210

pr_err("Unsupported kvm-stat host %d\n", e_machine);

tools/perf/util/kvm-stat.c

233

pr_err("Unsupported kvm-stat host %d\n", e_machine);

tools/perf/util/kvm-stat.c

256

pr_err("Unsupported kvm-stat host %d\n", e_machine);

tools/perf/util/kvm-stat.c

60

pr_err("unknown kvm exit code:%lld on %s\n",

tools/perf/util/libbfd.c

60

pr_err("Error initializing libbfd\n");

tools/perf/util/libbfd.c

64

pr_err("Error initializing libbfd threading\n");

tools/perf/util/lock-contention.c

40

pr_err("Memory allocation failure\n");

tools/perf/util/lock-contention.c

98

pr_err("memory allocation failed\n");

tools/perf/util/machine.c

338

pr_err("Can't access file %s\n", path);

tools/perf/util/machine.c

508

pr_err("Discarding thread maps for %d:%d\n",

tools/perf/util/machine.c

518

pr_err("Failed to join map groups for %d:%d\n", thread__pid(th), thread__tid(th));

tools/perf/util/machine.c

552

pr_err("Thread init failed thread %d\n", pid);

tools/perf/util/machine.c

587

pr_err("problem inserting idle task for machine pid %d\n", machine->pid);

tools/perf/util/map.c

637

pr_err("Internal error: map__kmap with a non-kernel map\n");

tools/perf/util/map.c

646

pr_err("Internal error: map__kmaps with a non-kernel map\n");

tools/perf/util/maps.c

427

pr_err("Map missing from maps");

tools/perf/util/maps.c

448

pr_err("Map missing from maps");

tools/perf/util/maps.c

467

pr_err("Internal error: kernel dso with non kernel map\n");

tools/perf/util/mem-events.c

177

pr_err("failed: event '%s' not found, use '-e list' to get list of available events\n", str);

tools/perf/util/mem-events.c

281

pr_err("failed: event '%s' not supported\n",

tools/perf/util/metricgroup.c

1150

pr_err("Cannot find metric or group `%s'\n", metric_name);

tools/perf/util/metricgroup.c

1483

pr_err("Cannot resolve IDs for %s: %s\n",

tools/perf/util/metricgroup.c

487

pr_err("Bad metric-id encoding in: '%s'", orig);

tools/perf/util/metricgroup.c

842

pr_err("failed: recursion detected for %s\n", pm->metric_name);

tools/perf/util/mmap.c

112

pr_err("Failed to allocate node mask for mbind: error %m\n");

tools/perf/util/mmap.c

117

pr_err("Failed to bind [%p-%p] AIO buffer to node %lu: error %m\n",

tools/perf/util/mutex.c

15

pr_err("%s error: '%s'\n", fn, str_error_r(err, sbuf, sizeof(sbuf)));

tools/perf/util/parse-branch-options.c

110

pr_err("Error: Can't use --branch-any (-b) with --branch-filter (-j).\n");

tools/perf/util/parse-events.c

2376

pr_err("Failed to allocate memory for event parsing error: %s (%s)\n",

tools/perf/util/parse-sublevel-options.c

17

pr_err("no memory\n");

tools/perf/util/parse-sublevel-options.c

32

pr_err("Unknown option name '%s'\n", s);

tools/perf/util/parse-sublevel-options.c

53

pr_err("no memory\n");

tools/perf/util/perf_regs.c

216

pr_err("Failed to find IP register for ELF machine type %u\n", e_machine);

tools/perf/util/perf_regs.c

245

pr_err("Failed to find SP register for ELF machine type %u\n", e_machine);

tools/perf/util/pmu.c

2129

pr_err("Failure to parse '%s' terms '%s': %d\n",

tools/perf/util/pmu.c

620

pr_err("Failed to read alias %s\n", name);

tools/perf/util/pmu.c

788

pr_err("Cannot parse '%s' terms '%s': %d\n",

tools/perf/util/pmus.c

268

pr_err("Failure to set up any core PMUs\n");

tools/perf/util/pmus.c

582

pr_err("Unexpected event %s/%s/\n", info->pmu->name, info->name);

tools/perf/util/pmus.c

626

pr_err("FATAL: not enough memory to print PMU events\n");

tools/perf/util/powerpc-vpadtl.c

522

pr_err("VPA requires ordered events\n");

tools/perf/util/probe-event.c

1210

pr_err("Failed to find the address of %s\n", buf);

tools/perf/util/probe-event.c

1662

pr_err("This program has a bug at %s:%d.\n",

tools/perf/util/probe-event.c

2934

pr_err("Probe group string='%s' is too long (>= %d bytes)\n",

tools/perf/util/probe-event.c

3104

pr_err("Please ensure you can read the /proc/kallsyms symbol addresses.\n"

tools/perf/util/probe-event.c

3149

pr_err("Failed to load symbols from %s\n",

tools/perf/util/probe-event.c

3152

pr_err("Please ensure the file is not stripped.\n");

tools/perf/util/probe-event.c

3156

pr_err("Failed to find symbol %s in %s\n", pp->function,

tools/perf/util/probe-event.c

3161

pr_err("Too many functions matched in %s\n",

tools/perf/util/probe-event.c

3793

pr_err("Failed to get a map for %s\n", (target) ? : "kernel");

tools/perf/util/probe-event.c

3801

pr_err("Failed to find symbols matched to \"%s\"\n",

tools/perf/util/probe-event.c

3805

pr_err("Failed to load symbols in %s\n",

tools/perf/util/probe-event.c

562

pr_err("Module %s is not loaded, please specify its full path name.\n", module);

tools/perf/util/probe-event.c

564

pr_err("Failed to find the path for the kernel: %s\n", reason);

tools/perf/util/probe-event.c

63

#define semantic_error(msg ...) pr_err("Semantic error :" msg)

tools/perf/util/probe-file.c

345

pr_err("strlist__add failed with -ENOMEM\n");

tools/perf/util/probe-file.c

541

pr_err("strlist__add failed with -ENOMEM\n");

tools/perf/util/probe-file.c

706

pr_err("strlist__add failed with -ENOMEM\n");

tools/perf/util/probe-file.c

937

pr_err("strlist__add failed with -ENOMEM\n");

tools/perf/util/probe-finder.c

366

pr_err("Semantic error: %s must be referred by '->'\n",

tools/perf/util/probe-finder.c

398

pr_err("Semantic error: %s is not a pointer"

tools/perf/util/probe-finder.c

404

pr_err("Semantic error: %s must be referred by '.'\n",

tools/perf/util/probe-finder.c

451

pr_err("Failed to find the location of the '%s' variable at this address.\n"

tools/perf/util/probe-finder.c

474

pr_err("Sorry, we don't support this variable location yet.\n");

tools/perf/util/probe-finder.c

593

pr_err("Caller must pass a scope DIE. Program error.\n");

tools/perf/util/pstack.c

54

pr_err("%s: %p not on the pstack!\n", __func__, key);

tools/perf/util/pstack.c

60

pr_err("%s: top=%d, overflow!\n", __func__, pstack->top);

tools/perf/util/record.c

157

pr_err("cannot set frequency and period at the same time\n");

tools/perf/util/record.c

174

pr_err("frequency and count are zero, aborting\n");

tools/perf/util/record.c

186

pr_err("error: Maximum frequency rate (%'u Hz) exceeded.\n"

tools/perf/util/record.c

281

pr_err("couldn't read /proc/sys/kernel/perf_event_max_sample_rate\n");

tools/perf/util/s390-cpumsf.c

1084

pr_err("Unsupported --itrace options specified\n");

tools/perf/util/s390-cpumsf.c

1102

pr_err("Failed to find auxtrace log directory %s,"

tools/perf/util/s390-cpumsf.c

1108

pr_err("Missing auxtrace log directory %s,"

tools/perf/util/s390-cpumsf.c

221

pr_err("Failed to open counter set log file %s, "

tools/perf/util/s390-cpumsf.c

233

pr_err("Failed to write counter set data\n");

tools/perf/util/s390-cpumsf.c

268

pr_err("Invalid AUX trace basic entry [%#08zx]\n", pos);

tools/perf/util/s390-cpumsf.c

301

pr_err("Invalid AUX trace diagnostic entry [%#08zx]\n", pos);

tools/perf/util/s390-cpumsf.c

343

pr_err("Invalid AUX trace trailer entry [%#08zx]\n", pos);

tools/perf/util/s390-cpumsf.c

448

pr_err("Invalid AUX trace data block size:%zu"

tools/perf/util/s390-cpumsf.c

543

pr_err("s390 Auxiliary Trace: failed to deliver event\n");

tools/perf/util/s390-cpumsf.c

626

pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n",

tools/perf/util/s390-cpumsf.c

727

pr_err("Failed to write auxiliary data\n");

tools/perf/util/s390-cpumsf.c

745

pr_err("Failed to write auxiliary data\n");

tools/perf/util/s390-cpumsf.c

792

pr_err("Failed to open auxiliary log file %s,"

tools/perf/util/s390-cpumsf.c

901

pr_err("s390 Auxiliary Trace: failed to deliver error event,"

tools/perf/util/s390-cpumsf.c

931

pr_err("s390 Auxiliary Trace requires ordered events\n");

tools/perf/util/s390-sample-raw.c

353

pr_err("Invalid counter set data encountered\n");

tools/perf/util/s390-sample-raw.c

371

pr_err("Invalid %s raw data encountered\n", pai_name);

tools/perf/util/s390-sample-raw.c

75

pr_err("Invalid counter set entry at %zd\n", offset);

tools/perf/util/sample.c

38

pr_err("Failure to allocate sample user_regs");

tools/perf/util/sample.c

49

pr_err("Failure to allocate sample intr_regs");

tools/perf/util/scripting-engines/trace-event-perl.c

250

pr_err("Unsupported print arg type\n");

tools/perf/util/scripting-engines/trace-event-perl.c

277

pr_err("Failed to resolve callchain. Skipping\n");

tools/perf/util/scripting-engines/trace-event-python.c

410

pr_err("Failed to resolve callchain. Skipping\n");

tools/perf/util/session.c

1372

pr_err("failed to parse original sample\n");

tools/perf/util/session.c

1419

pr_err("failed to parse original sample\n");

tools/perf/util/session.c

1560

pr_err("Can't parse sample, err = %d\n", ret);

tools/perf/util/session.c

2072

pr_err("failed to read event header\n");

tools/perf/util/session.c

2081

pr_err("bad event header size\n");

tools/perf/util/session.c

2088

pr_err("failed to allocate memory to read event\n");

tools/perf/util/session.c

2103

pr_err("unexpected end of event stream\n");

tools/perf/util/session.c

2107

pr_err("failed to read event data\n");

tools/perf/util/session.c

2113

pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n",

tools/perf/util/session.c

2228

pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n",

tools/perf/util/session.c

2342

pr_err("failed to mmap file\n");

tools/perf/util/session.c

2385

pr_err("%#" PRIx64 " [%#x]: failed to process type: %d [%m]\n",

tools/perf/util/session.c

2661

pr_err("No trace sample to read. Did you call 'perf %s'?\n", msg);

tools/perf/util/session.c

2782

pr_err("File does not contain CPU events. "

tools/perf/util/session.c

2790

pr_err("Invalid cpu_list\n");

tools/perf/util/session.c

2796

pr_err("Requested CPU %d too large. "

tools/perf/util/session.c

56

pr_err("incompatible file format (rerun with -v to learn more)\n");

tools/perf/util/session.c

648

pr_err("cpu_map swap: unsupported long size\n");

tools/perf/util/session.c

72

pr_err("non matching sample_type\n");

tools/perf/util/session.c

77

pr_err("non matching sample_id_all\n");

tools/perf/util/session.c

82

pr_err("non matching read_format\n");

tools/perf/util/sort.c

2881

pr_err("Memory allocation failed\n");

tools/perf/util/sort.c

3498

pr_err("%s %s", ret ? "," : "This perf binary isn't linked with libtraceevent, can't process", evsel__name(evsel));

tools/perf/util/sort.c

3504

pr_err("\n");

tools/perf/util/sort.c

3557

pr_err("Invalid regex: %s\n%s", parent_pattern, err);

tools/perf/util/sort.c

3908

pr_err("Not enough memory to set up --sort");

tools/perf/util/sort.c

3986

pr_err("Not enough memory to setup sort keys");

tools/perf/util/sort.c

3996

pr_err("Not enough memory to setup overhead keys");

tools/perf/util/sort.c

4218

pr_err("Not enough memory to setup output fields");

tools/perf/util/stat.c

395

pr_err("failed to read per-pkg counter\n");

tools/perf/util/stat.c

521

pr_err("Unmatched aggregation mode between aliases\n");

tools/perf/util/stat.c

663

pr_err("Failed to resolve counter for stat event.\n");

tools/perf/util/stat.c

668

pr_err("Invalid CPU %d for event %s.\n", st->cpu, evsel__name(counter));

tools/perf/util/stat.c

673

pr_err("Failed to find perf count for CPU %d thread %d on event %s.\n",

tools/perf/util/symbol-elf.c

1014

pr_err("%s: cannot get elf header.\n", __func__);

tools/perf/util/symbol-elf.c

2714

pr_err("gelf_xlatetom : %s\n", elf_errmsg(-1));

tools/perf/util/symbol-elf.c

72

pr_err("%s: update your libelf to > 0.140, this one lacks elf_getshdrstrndx().\n", __func__);

tools/perf/util/symbol-elf.c

802

pr_err("%s: cannot get elf header.\n", __func__);

tools/perf/util/symbol.c

2048

pr_err("No kallsyms or vmlinux with build-id %s was found\n",

tools/perf/util/symbol.c

2257

pr_err("problems parsing %s list\n", list_name);

tools/perf/util/symbol.c

2273

pr_err("problems parsing %s list\n", list_name);

tools/perf/util/symbol.c

2353

pr_err("Annotation needs to be init before symbol__init()\n");

tools/perf/util/symbol.c

2373

pr_err("failed to parse parallelism filter list\n");

tools/perf/util/symbol.c

2380

pr_err("Requested parallelism level %d is invalid.\n", cpu.cpu);

tools/perf/util/symbol.c

2407

pr_err("'.' is the only non valid --field-separator argument\n");

tools/perf/util/symbol.c

2524

pr_err("Invalid file: %s\n", symbol_conf.vmlinux_name);

tools/perf/util/symbol.c

2529

pr_err("Invalid file: %s\n", symbol_conf.kallsyms_name);

tools/perf/util/synthetic-events.c

1967

pr_err("Perf runs in non-root PID namespace but it tries to ");

tools/perf/util/synthetic-events.c

1968

pr_err("gather process info from its parent PID namespace.\n");

tools/perf/util/synthetic-events.c

1969

pr_err("Please mount the proc file system properly, e.g. ");

tools/perf/util/synthetic-events.c

1970

pr_err("add the option '--mount-proc' for unshare command.\n");

tools/perf/util/synthetic-events.c

2133

pr_err("Couldn't synthesize evsel unit.\n");

tools/perf/util/synthetic-events.c

2141

pr_err("Couldn't synthesize evsel evsel.\n");

tools/perf/util/synthetic-events.c

2149

pr_err("Couldn't synthesize evsel cpus.\n");

tools/perf/util/synthetic-events.c

2161

pr_err("Couldn't synthesize evsel name.\n");

tools/perf/util/synthetic-events.c

2288

pr_err("Bad id sample size %d\n", ret);

tools/perf/util/synthetic-events.c

2347

pr_err("Bad id sample size %d\n", ret);

tools/perf/util/synthetic-events.c

2364

pr_err("Couldn't synthesize attrs.\n");

tools/perf/util/synthetic-events.c

2372

pr_err("Couldn't synthesize thread map.\n");

tools/perf/util/synthetic-events.c

2378

pr_err("Couldn't synthesize thread map.\n");

tools/perf/util/synthetic-events.c

2384

pr_err("Couldn't synthesize config.\n");

tools/perf/util/synthetic-events.c

2471

pr_err("Couldn't synthesize attrs.\n");

tools/perf/util/synthetic-events.c

2478

pr_err("Couldn't synthesize features.\n");

tools/perf/util/synthetic-events.c

2498

pr_err("Couldn't record tracing data.\n");

tools/perf/util/synthetic-events.c

2672

pr_err("Failed to open %s. Possibly CONFIG_SCHEDSTAT is disabled.\n", path);

tools/perf/util/synthetic-events.c

2687

pr_err("Unsupported %s version: %s", path, line + 8);

tools/perf/util/thread-stack.c

355

pr_err("Error flushing thread stack!\n");

tools/perf/util/time-utils.c

478

pr_err("HINT: no first/last sample time found in perf data.\n"

tools/perf/util/time-utils.c

513

pr_err("Invalid time string\n");

tools/perf/util/tool.c

36

pr_err("Couldn't allocate memory for decompression\n");

tools/perf/util/tool.c

64

pr_err("Couldn't decompress data\n");

tools/perf/util/trace-event-scripting.c

190

pr_err("Error registering Python script extension: disabling it\n");

tools/perf/util/trace-event-scripting.c

256

pr_err("Error registering Perl script extension: disabling it\n");

tools/perf/util/unwind-libdw.c

322

pr_err("%s", dwfl_errmsg(-1));

tools/perf/util/unwind-libdw.c

331

pr_err("%s", dwfl_errmsg(-1));

tools/perf/util/unwind-libunwind-local.c

392

pr_err("unwind: Can't read unwind spec debug frame.\n");

tools/perf/util/unwind-libunwind-local.c

515

pr_err("unwind: access_fpreg unsupported\n");

tools/perf/util/unwind-libunwind-local.c

530

pr_err("unwind: resume unsupported\n");

tools/perf/util/unwind-libunwind-local.c

540

pr_err("unwind: get_proc_name unsupported\n");

tools/perf/util/unwind-libunwind-local.c

628

pr_err("unwind: access_reg w %d\n", regnum);

tools/perf/util/unwind-libunwind-local.c

644

pr_err("unwind: can't read reg %d\n", regnum);

tools/perf/util/unwind-libunwind-local.c

687

pr_err("unwind: Only supports local.\n");

tools/perf/util/unwind-libunwind-local.c

690

pr_err("unwind: Unspecified error.\n");

tools/perf/util/unwind-libunwind-local.c

693

pr_err("unwind: Register unavailable.\n");

tools/perf/util/unwind-libunwind-local.c

717

pr_err("unwind: Can't create unwind address space.\n");

tools/perf/util/vdso.c

237

pr_err("%s failed, error %d\n", vdso_file->read_prog, err);

tools/perf/util/zstd.c

105

pr_err("failed to decompress (B): %zd -> %zd, dst_size %zd : %s\n",

tools/perf/util/zstd.c

43

pr_err("Couldn't create compression stream.\n");

tools/perf/util/zstd.c

49

pr_err("Failed to initialize compression stream: %s\n",

tools/perf/util/zstd.c

66

pr_err("failed to compress %ld bytes: %s\n",

tools/perf/util/zstd.c

91

pr_err("Couldn't create decompression stream.\n");

tools/perf/util/zstd.c

97

pr_err("Failed to initialize decompression stream: %s\n",

tools/testing/cxl/test/cxl_translate.c

150

pr_err("Device to host failed: expected HPA %llu, got %llu\n",

tools/testing/cxl/test/cxl_translate.c

158

pr_err("Host to Device DPA failed: expected %llu, got %llu\n",

tools/testing/cxl/test/cxl_translate.c

166

pr_err("Position lookup failed: expected %d, got %d\n", pos,

tools/testing/cxl/test/cxl_translate.c

199

pr_err("Parse error: expected %d parameters, got %d in '%s'\n",

tools/testing/cxl/test/cxl_translate.c

204

pr_err("Parameter overflow in entry: '%s'\n", entry);

tools/testing/cxl/test/cxl_translate.c

208

pr_err("Invalid math type %d in entry: '%s'\n", *math, entry);

tools/testing/cxl/test/cxl_translate.c

274

pr_err("test random iter %d FAIL hpa=%llu, dpa=%llu reverse_dpa=%llu, pos=%d reverse_pos=%d eiw=%u eig=%u\n",

tools/testing/cxl/test/cxl_translate.c

278

pr_err("test random too many failures, stop\n");

tools/testing/cxl/test/cxl_translate.c

352

pr_err("test params failed: %s\n", t->desc);

tools/testing/cxl/test/cxl_translate.c

413

pr_err("CXL Translate Test %d: FAIL\n"

tools/testing/cxl/test/cxl_translate.c

422

pr_err("CXL Translate Test %d: FAIL\n"

tools/testing/nvdimm/test/ndtest.c

436

pr_err("failed to parse UUID\n");

tools/testing/nvdimm/test/ndtest.c

751

pr_err("Could not create dimm device attributes\n");

tools/testing/nvdimm/test/ndtest.c

886

pr_err("%s:%d Failed nvdimm init\n", __func__, __LINE__);

tools/testing/nvdimm/test/ndtest.c

987

pr_err("Error registering platform device\n");

tools/testing/radix-tree/maple.c

35544

pr_err("The lower 8 bits of enode are different.\n");

tools/testing/radix-tree/maple.c

35568

pr_err("The lower 8 bits of parents are different. %p %p\n",

tools/testing/radix-tree/maple.c

35588

pr_err("The number of slots is different.\n");

tools/testing/radix-tree/maple.c

35614

pr_err("The flags of the two trees are different.\n");

tools/testing/radix-tree/maple.c

35623

pr_err("One is ma_root and the other is not.\n");

tools/testing/radix-tree/maple.c

35632

pr_err("One is ma_none and the other is not.\n");

tools/testing/radix-tree/maple.c

35638

pr_err("mas->min, mas->max do not match.\n");

tools/testing/radix-tree/maple.c

35643

pr_err("The contents of nodes %p and %p are different.\n",

tools/testing/radix-tree/maple.c

600

pr_err("%s: %d %s %lu - %lu\n", __func__, i,

tools/testing/radix-tree/maple.c

668

pr_err("Done\n");

tools/testing/radix-tree/maple.c

676

pr_err("mt: %lu -> %p (%d)\n", addr+1, foo, check);

tools/testing/radix-tree/maple.c

683

pr_err("mt_for_each %d and count %d\n", check, entry_count);

tools/testing/radix-tree/maple.c

697

pr_err("retry failed %lu - %lu\n",

tools/testing/radix-tree/maple.c

705

pr_err("mas: %lu -> %p\n", mas.index, foo);

tools/testing/radix-tree/maple.c

713

pr_err("mas_for_each %d and count %d\n", check, entry_count);

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

178

pr_err("Waiting 5 secs to pause the test\n");

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

181

pr_err("Paused the test\n");

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

246

pr_err("Invalid mode %d\n", test_mode);

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

250

pr_err("Mode = %s\n", rqsl_mode_names[test_mode]);

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

309

pr_err("rqspinlock acquisition latency histogram (ms):\n");

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

344

pr_err(" cpu%d: total %llu (normal %llu, nmi %llu) | "

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

354

pr_err(" cpu%d: total %llu (normal %llu, nmi %llu) | "

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

368

pr_err(" >= %ums: total %llu (normal %llu, nmi %llu)\n",

tools/testing/selftests/bpf/test_kmods/bpf_test_rqspinlock.c

372

pr_err(" %u-%ums: total %llu (normal %llu, nmi %llu)\n",

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1002

pr_err("%s called without initializing sock", __func__);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1021

pr_err("%s called without initializing sock", __func__);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1052

pr_err("%s called without initializing sock", __func__);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1085

pr_err("%s called without initializing sock", __func__);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1105

pr_err("%s called without initializing sock", __func__);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1129

pr_err("%s called without initializing sock", __func__);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1417

pr_err("st_ops has already been registered\n");

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1655

pr_err("st_ops has already been registered\n");

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

1796

pr_err("multi_st_ops(id:%d) has already been registered\n", id);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

923

pr_err("%s called without releasing old sock", __func__);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

937

pr_err("invalid address family %d\n", args->af);

tools/testing/selftests/bpf/test_kmods/bpf_testmod.c

979

pr_err("%s called without initializing sock", __func__);

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1000

pr_err("received on wrong dmabuf_id: flow steering error");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1026

pr_err("SO_DEVMEM_DONTNEED not enough tokens");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1031

pr_err("flow steering error");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1075

pr_err("Failed to allocate memory buffer");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1081

pr_err("Failed to get current ring configuration");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1087

pr_err("rss error");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1092

pr_err("Failed to configure header split");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1098

pr_err("Failed to allocate empty queues array");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1103

pr_err("Binding empty queues array should have failed");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1108

pr_err("Failed to configure header split");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1114

pr_err("Failed to create queues");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1119

pr_err("Configure dmabuf with header split off should have failed");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1124

pr_err("Failed to configure header split");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1130

pr_err("Failed to create queues");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1135

pr_err("Failed to bind");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1141

pr_err("Deactivating a bound queue should be illegal");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1179

pr_err("poll");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1210

pr_err("recvmsg(MSG_ERRQUEUE)");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1214

pr_err("MSG_CTRUNC");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1231

pr_err("wrong origin %u", serr->ee_origin);

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1235

pr_err("wrong errno %d", serr->ee_errno);

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1247

pr_err("did not receive tx completion");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1270

pr_err("parse server address");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1277

pr_err("parse client address");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1284

pr_err("create socket");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1294

pr_err("bindtodevice");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1299

pr_err("Failed to bind");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1306

pr_err("bind");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1313

pr_err("set sock opt");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1322

pr_err("connect");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1338

pr_err("can't partition %zd bytes into maximum of %d chunks",

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1373

pr_err("Failed sendmsg");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1380

pr_err("Did not send all bytes %d vs %zd", ret, line_size);

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1446

pr_err("Missing -f argument");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1458

pr_err("couldn't detect number of queues");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1462

pr_err("number of device queues is too low");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1471

pr_err("Both -t and -q are required");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1481

pr_err("number of device queues is too low");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1489

pr_err("couldn't detect number of queues");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1500

pr_err("Missing -t argument");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1505

pr_err("Missing -q argument");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1510

pr_err("Missing -s argument");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1515

pr_err("Missing -p argument");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

1521

pr_err("Failed to allocate memory buffer");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

154

pr_err("[skip,no-udmabuf: Unable to access DMA buffer device file]");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

160

pr_err("[skip,no-memfd]");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

166

pr_err("[skip,fcntl-add-seals]");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

172

pr_err("[FAIL,memfd-truncate]");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

183

pr_err("[FAIL, create udmabuf]");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

190

pr_err("[FAIL, map udmabuf]");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

278

pr_err("validation failed");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

778

pr_err("SO_REUSEPORT failed");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

784

pr_err("SO_REUSEADDR failed");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

850

pr_err("parse server address");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

856

pr_err("Failed to get current ring configuration");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

861

pr_err("Failed to enable TCP header split");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

867

pr_err("Failed to configure rss");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

873

pr_err("Failed to configure flow steering");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

878

pr_err("Failed to bind");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

888

pr_err("Failed to create socket");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

900

pr_err("Failed to bind");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

906

pr_err("Failed to listen");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

918

pr_err("Failed to accept");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

949

pr_err("received EFAULT, won't recover");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

956

pr_err("client exited");

tools/testing/selftests/drivers/net/hw/ncdevmem.c

980

pr_err("received SCM_DEVMEM_LINEAR but --fail-on-linear (-L) set");

tools/testing/selftests/filesystems/nsfs/owner.c

39

return pr_err("fork");

tools/testing/selftests/filesystems/nsfs/owner.c

43

return pr_err("unshare");

tools/testing/selftests/filesystems/nsfs/owner.c

52

return pr_err("Unable to read from pipe");

tools/testing/selftests/filesystems/nsfs/owner.c

58

return pr_err("Unable to open %s", path);

tools/testing/selftests/filesystems/nsfs/owner.c

62

return pr_err("Unable to get an owning user namespace");

tools/testing/selftests/filesystems/nsfs/owner.c

65

return pr_err("fstat");

tools/testing/selftests/filesystems/nsfs/owner.c

69

return pr_err("stat");

tools/testing/selftests/filesystems/nsfs/owner.c

72

return pr_err("NS_GET_USERNS returned a wrong namespace");

tools/testing/selftests/filesystems/nsfs/owner.c

76

return pr_err("Unable to get an owning user namespace");

tools/testing/selftests/filesystems/nsfs/owner.c

79

return pr_err("Don't get EPERM");

tools/testing/selftests/filesystems/nsfs/owner.c

82

return pr_err("unshare");

tools/testing/selftests/filesystems/nsfs/owner.c

85

return pr_err("Don't get EPERM");

tools/testing/selftests/filesystems/nsfs/owner.c

87

return pr_err("Don't get EPERM");

tools/testing/selftests/filesystems/nsfs/pidns.c

52

return pr_err("clone");

tools/testing/selftests/filesystems/nsfs/pidns.c

58

return pr_err("Unable to open %s", path);

tools/testing/selftests/filesystems/nsfs/pidns.c

62

return pr_err("Unable to get a parent pidns");

tools/testing/selftests/filesystems/nsfs/pidns.c

66

return pr_err("Unable to stat %s", path);

tools/testing/selftests/filesystems/nsfs/pidns.c

68

return pr_err("Unable to stat the parent pidns");

tools/testing/selftests/filesystems/nsfs/pidns.c

70

return pr_err("NS_GET_PARENT returned a wrong namespace");

tools/testing/selftests/filesystems/nsfs/pidns.c

73

return pr_err("Don't get EPERM");

tools/testing/selftests/filesystems/overlayfs/dev_in_maps.c

47

return pr_err("unable to find the mapping");

tools/testing/selftests/filesystems/overlayfs/log.h

24

#define pr_perror(fmt, ...) pr_p(pr_err, fmt, ##__VA_ARGS__)

tools/testing/selftests/mm/page_frag/page_frag_test.c

174

pr_err(TEST_FAILED_PREFIX "exit with error\n");

tools/testing/selftests/net/bench/page_pool/bench_page_pool_simple.c

247

pr_err("Module param loops(%lu) exceeded U32_MAX(%u)\n", loops,

tools/testing/selftests/net/bench/page_pool/time_bench.c

124

pr_err("ERR: need more(>1000) loops(%llu) for timing\n",

tools/testing/selftests/net/bench/page_pool/time_bench.c

130

pr_err("ERR: Invoke cnt(%llu) too big overflow 32bit\n",

tools/testing/selftests/net/bench/page_pool/time_bench.c

141

pr_err("ABORT: timing took ZERO TSC time\n");

tools/testing/selftests/net/bench/page_pool/time_bench.c

159

pr_err("ABORT: timing took ZERO wallclock time\n");

tools/testing/selftests/net/bench/page_pool/time_bench.c

230

pr_err("ABORT: function being timed failed\n");

tools/testing/selftests/net/bench/page_pool/time_bench.c

271

pr_err("ERROR: function being timed failed on CPU:%d(%d)\n",

tools/testing/selftests/net/bench/page_pool/time_bench.c

365

pr_err("%s(): Failed to start test func\n", __func__);

tools/testing/selftests/net/ipsec.c

1049

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1055

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

1153

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1204

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1257

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1308

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1313

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

1348

pr_err("bind()");

tools/testing/selftests/net/ipsec.c

1354

pr_err("getsockname()");

tools/testing/selftests/net/ipsec.c

1406

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1411

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

1425

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

148

pr_err("unshare()");

tools/testing/selftests/net/ipsec.c

1480

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1485

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

1499

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

154

pr_err("open(%s)", netns_path);

tools/testing/selftests/net/ipsec.c

1558

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1563

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

1577

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

1627

pr_err("adding attribute failed: no space");

tools/testing/selftests/net/ipsec.c

1633

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1638

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

164

pr_err("setns()");

tools/testing/selftests/net/ipsec.c

1665

pr_err("Can't set SPD HTHRESH");

tools/testing/selftests/net/ipsec.c

1676

pr_err("send()");

tools/testing/selftests/net/ipsec.c

1681

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

1694

pr_err("thresh differ: %u, %u",

tools/testing/selftests/net/ipsec.c

1704

pr_err("thresh differ: %u, %u",

tools/testing/selftests/net/ipsec.c

1711

pr_err("only %d thresh returned by XFRM_MSG_GETSPDINFO", got_thresh);

tools/testing/selftests/net/ipsec.c

1724

pr_err("Can't restore SPD HTHRESH");

tools/testing/selftests/net/ipsec.c

1843

pr_err("read() returned %zd", received);

tools/testing/selftests/net/ipsec.c

1976

pr_err("fork()");

tools/testing/selftests/net/ipsec.c

1984

pr_err("close()");

tools/testing/selftests/net/ipsec.c

1992

pr_err("mmap()");

tools/testing/selftests/net/ipsec.c

1999

pr_err("socketpair()");

tools/testing/selftests/net/ipsec.c

2005

pr_err("fork()");

tools/testing/selftests/net/ipsec.c

2009

pr_err("close()");

tools/testing/selftests/net/ipsec.c

2015

pr_err("close()");

tools/testing/selftests/net/ipsec.c

2036

pr_err("Writing test's desc failed %ld", ret);

tools/testing/selftests/net/ipsec.c

205

pr_err("socket(AF_NETLINK)");

tools/testing/selftests/net/ipsec.c

2186

pr_err("fork()");

tools/testing/selftests/net/ipsec.c

2218

pr_err("wait()");

tools/testing/selftests/net/ipsec.c

2250

pr_err("read() returned %zd", received);

tools/testing/selftests/net/ipsec.c

298

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

356

pr_err("send()");

tools/testing/selftests/net/ipsec.c

398

pr_err("send()");

tools/testing/selftests/net/ipsec.c

424

pr_err("send()");

tools/testing/selftests/net/ipsec.c

462

pr_err("send()");

tools/testing/selftests/net/ipsec.c

588

pr_err("Failed to write the result in pipe %zd", ret);

tools/testing/selftests/net/ipsec.c

599

pr_err("write()");

tools/testing/selftests/net/ipsec.c

604

pr_err("sent part of the message %zd/%zu", bytes, sizeof(*msg));

tools/testing/selftests/net/ipsec.c

615

pr_err("read()");

tools/testing/selftests/net/ipsec.c

620

pr_err("got incomplete message %zd/%zu", bytes, sizeof(*msg));

tools/testing/selftests/net/ipsec.c

635

pr_err("socket()");

tools/testing/selftests/net/ipsec.c

644

pr_err("bind()");

tools/testing/selftests/net/ipsec.c

649

pr_err("getsockname()");

tools/testing/selftests/net/ipsec.c

656

pr_err("setsockopt()");

tools/testing/selftests/net/ipsec.c

662

pr_err("socket()");

tools/testing/selftests/net/ipsec.c

687

pr_err("sendto()");

tools/testing/selftests/net/ipsec.c

697

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

725

pr_err("recv()");

tools/testing/selftests/net/ipsec.c

739

pr_err("sendto()");

tools/testing/selftests/net/ipsec.c

966

pr_err("send()");

tools/testing/selftests/net/so_netns_cookie.c

32

return pr_err("Unable to create TCP socket");

tools/testing/selftests/net/so_netns_cookie.c

36

return pr_err("getsockopt(SOL_SOCKET, SO_NETNS_COOKIE)");

tools/testing/selftests/net/so_netns_cookie.c

39

return pr_err("SO_NETNS_COOKIE returned zero cookie");

tools/testing/selftests/net/so_netns_cookie.c

42

return pr_err("unshare");

tools/testing/selftests/net/so_netns_cookie.c

46

return pr_err("Unable to create TCP socket");

tools/testing/selftests/net/so_netns_cookie.c

50

return pr_err("getsockopt(SOL_SOCKET, SO_NETNS_COOKIE)");

tools/testing/selftests/net/so_netns_cookie.c

53

return pr_err("SO_NETNS_COOKIE returned zero cookie");

tools/testing/selftests/net/so_netns_cookie.c

56

return pr_err("SO_NETNS_COOKIE returned identical cookies for distinct ns");

tools/testing/selftests/powerpc/tm/tm-unavailable.c

320

pr_err(rc, "pthread_create()");

tools/testing/selftests/powerpc/tm/tm-unavailable.c

326

pr_err(rc, "pthread_join");

tools/testing/selftests/powerpc/tm/tm-unavailable.c

359

pr_err(rc, "pthread_attr_init()");

tools/testing/selftests/powerpc/tm/tm-unavailable.c

364

pr_err(rc, "pthread_attr_setaffinity_np()");

tools/testing/selftests/powerpc/tm/tm-unavailable.c

368

pr_err(rc, "pthread_create()");

tools/testing/selftests/timens/clock_nanosleep.c

73

pr_err("Unable to create a thread: %s", strerror(ret));

tools/testing/selftests/timens/gettime_perf.c

35

pr_err("[WARN]\tfailed to find vDSO\n");

tools/testing/selftests/timens/gettime_perf.c

43

pr_err("Warning: failed to find clock_gettime in vDSO\n");

tools/testing/selftests/timens/log.h

24

#define pr_perror(fmt, ...) pr_p(pr_err, fmt, ##__VA_ARGS__)

tools/testing/selftests/timens/procfs.c

116

pr_err("failed to parse /proc/stat");

tools/testing/selftests/timens/procfs.c

128

return pr_err("switch_ns(%d)", parent_ns);

tools/testing/selftests/timens/procfs.c

134

return pr_err("switch_ns(%d)", child_ns);

tools/testing/selftests/timens/procfs.c

157

return pr_err("switch_ns(%d)", parent_ns);

tools/testing/selftests/timens/procfs.c

163

return pr_err("switch_ns(%d)", child_ns);

tools/testing/selftests/timens/procfs.c

60

return pr_err("The same child_ns after CLONE_NEWTIME");

tools/testing/selftests/timens/procfs.c

84

pr_err("failed to parse /proc/uptime");

tools/testing/selftests/timens/timens.c

105

return pr_err("switch_ns(%d)", child_ns);

tools/testing/selftests/timens/timens.c

114

return pr_err("switch_ns(%d)", child_ns);

tools/testing/selftests/timens/timens.c

128

return pr_err("switch_ns(%d)", parent_ns);

tools/testing/vma/include/custom.h

33

#define pr_warn_once pr_err

tools/virtio/virtio-trace/trace-agent-ctl.c

108

pr_err("read data error in ctl thread\n");

tools/virtio/virtio-trace/trace-agent-ctl.c

38

pr_err("Cannot open ctl_fd\n");

tools/virtio/virtio-trace/trace-agent-ctl.c

72

pr_err("Polling error\n");

tools/virtio/virtio-trace/trace-agent-rw.c

101

pr_err("Could not set CPU#%d affinity\n", (int)cpu_num);

tools/virtio/virtio-trace/trace-agent-rw.c

131

pr_err("Splice_read in rw-thread(%d)\n", ts->cpu_num);

tools/virtio/virtio-trace/trace-agent-rw.c

153

pr_err("Splice_write in rw-thread(%d)\n",

tools/virtio/virtio-trace/trace-agent-rw.c

185

pr_err("Could not create a rw thread(%d)\n", rw_ti->cpu_num);

tools/virtio/virtio-trace/trace-agent-rw.c

26

pr_err("rw_thread_info zalloc error\n");

tools/virtio/virtio-trace/trace-agent-rw.c

51

pr_err("Could not open in_fd (CPU:%d)\n", cpu);

tools/virtio/virtio-trace/trace-agent-rw.c

60

pr_err("Could not open out_fd (CPU:%d)\n", cpu);

tools/virtio/virtio-trace/trace-agent-rw.c

68

pr_err("Could not create pipe in rw-thread(%d)\n", cpu);

tools/virtio/virtio-trace/trace-agent-rw.c

77

pr_err("Could not change pipe size in rw-thread(%d)\n", cpu);

tools/virtio/virtio-trace/trace-agent.c

107

pr_err("usage: %s [-h] [-o] [-s <size of pipe>]\n", prg);

tools/virtio/virtio-trace/trace-agent.c

117

pr_err("Could not allocate buffer\n");

tools/virtio/virtio-trace/trace-agent.c

132

pr_err("Failed to generate %s path(CPU#%d):%d\n",

tools/virtio/virtio-trace/trace-agent.c

239

pr_err("pthread_join() error:%d (cpu %d)\n", ret, cpu);

tools/virtio/virtio-trace/trace-agent.c

35

pr_err("Could not read cpus\n");

tools/virtio/virtio-trace/trace-agent.c

38

pr_err("Exceed max cpus(%d)\n", (int)MAX_CPUS);

tools/virtio/virtio-trace/trace-agent.c

55

pr_err("agent_info zalloc error\n");

tools/virtio/virtio-trace/trace-agent.c

89

pr_err("Pipe size must be less than 1MB\n");

tools/virtio/virtio-trace/trace-agent.c

92

pr_err("Pipe size must be over 64KB\n");

virt/kvm/kvm_main.c

6058

pr_err("kvm: failed to shrink bus, removing it completely\n");

virt/kvm/kvm_main.c

6549

pr_err("kvm: misc device register failed\n");