drivers/net/ethernet/mellanox/mlx4/catas.c

109

mlx4_err(dev, "VF reset is not needed\n");

drivers/net/ethernet/mellanox/mlx4/catas.c

114

mlx4_err(dev, "VF reset is not supported\n");

drivers/net/ethernet/mellanox/mlx4/catas.c

123

mlx4_err(dev, "Communication channel isn't sync, fail to send reset\n");

drivers/net/ethernet/mellanox/mlx4/catas.c

153

mlx4_err(dev, "Fail to send reset over the communication channel\n");

drivers/net/ethernet/mellanox/mlx4/catas.c

176

mlx4_err(dev, "device is going to be reset\n");

drivers/net/ethernet/mellanox/mlx4/catas.c

185

mlx4_err(dev, "device was reset successfully\n");

drivers/net/ethernet/mellanox/mlx4/catas.c

231

mlx4_err(dev, "Internal error detected:\n");

drivers/net/ethernet/mellanox/mlx4/catas.c

233

mlx4_err(dev, " buf[%02x]: %08x\n",

drivers/net/ethernet/mellanox/mlx4/catas.c

57

mlx4_err(dev, "Failed to read vendor ID, ret=%d\n", ret);

drivers/net/ethernet/mellanox/mlx4/catas.c

62

mlx4_err(dev, "PCI can't be accessed to read vendor id\n");

drivers/net/ethernet/mellanox/mlx4/catas.c

86

mlx4_err(dev, "Fail to reset HCA\n");

drivers/net/ethernet/mellanox/mlx4/cmd.c

1012

mlx4_err(dev, "Unprivileged slave %d is trying to execute a Subnet MGMT MAD, class 0x%x, method 0x%x, view=%s for attr 0x%x. Rejecting\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

1690

mlx4_err(dev, "%s: Failed reading vhcr ret: 0x%x\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

1714

mlx4_err(dev, "Unknown command:0x%x accepted from slave:%d\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

1736

mlx4_err(dev, "%s: Failed reading inbox (cmd:0x%x)\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

1812

mlx4_err(dev, "%s:Failed writing outbox\n", __func__);

drivers/net/ethernet/mellanox/mlx4/cmd.c

1826

mlx4_err(dev, "%s:Failed writing vhcr result\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

2167

mlx4_err(dev, "Failed processing vhcr for slave:%d, resetting slave\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

2362

mlx4_err(dev, "Couldn't map communication vector\n");

drivers/net/ethernet/mellanox/mlx4/cmd.c

2460

mlx4_err(dev, "Couldn't sync toggles\n");

drivers/net/ethernet/mellanox/mlx4/cmd.c

2508

mlx4_err(dev, "Couldn't map command register\n");

drivers/net/ethernet/mellanox/mlx4/cmd.c

2723

mlx4_err(dev, "Bad vf number:%d (number of activated vf: %d)\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

2734

mlx4_err(dev,

drivers/net/ethernet/mellanox/mlx4/cmd.c

3036

mlx4_err(dev, "vf %d does not support VST QinQ mode\n", vf);

drivers/net/ethernet/mellanox/mlx4/cmd.c

374

mlx4_err(dev, "command 0x%x failed: fw status = 0x%x\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

470

mlx4_err(dev, "%s:cmd_pending failed\n", __func__);

drivers/net/ethernet/mellanox/mlx4/cmd.c

537

mlx4_err(dev, "response expected while output mailbox is NULL for command 0x%x\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

556

mlx4_err(dev, "response expected while output mailbox is NULL for command 0x%x\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

568

mlx4_err(dev, "failed execution of VHCR_POST command opcode 0x%x\n", op);

drivers/net/ethernet/mellanox/mlx4/cmd.c

598

mlx4_err(dev, "response expected while output mailbox is NULL for command 0x%x\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

645

mlx4_err(dev, "command 0x%x failed: fw status = 0x%x\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

696

mlx4_err(dev, "response expected while output mailbox is NULL for command 0x%x\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

748

mlx4_err(dev, "command 0x%x failed: fw status = 0x%x\n",

drivers/net/ethernet/mellanox/mlx4/cmd.c

821

mlx4_err(dev, "Bad access mem params - slave_addr:0x%llx master_addr:0x%llx slave_id:%d size:%d\n",

drivers/net/ethernet/mellanox/mlx4/crdump.c

102

mlx4_err(dev, "crdump: cr-space region is NULL\n");

drivers/net/ethernet/mellanox/mlx4/crdump.c

125

mlx4_err(dev, "crdump: Failed to allocate crspace buffer\n");

drivers/net/ethernet/mellanox/mlx4/crdump.c

139

mlx4_err(dev, "crdump: fw-health region is NULL\n");

drivers/net/ethernet/mellanox/mlx4/crdump.c

164

mlx4_err(dev, "crdump: Failed to allocate health buffer\n");

drivers/net/ethernet/mellanox/mlx4/crdump.c

192

mlx4_err(dev, "crdump: Failed to map pci cr region\n");

drivers/net/ethernet/mellanox/mlx4/crdump.c

199

mlx4_err(dev, "crdump: devlink get snapshot id err %d\n", err);

drivers/net/ethernet/mellanox/mlx4/en_clock.c

296

mlx4_err(mdev, "ptp_clock_register failed\n");

drivers/net/ethernet/mellanox/mlx4/en_cq.c

112

mlx4_err(mdev, "Failed assigning an EQ to CQ vector %d\n",

drivers/net/ethernet/mellanox/mlx4/en_main.c

219

mlx4_err(mdev, "Internal error detected, restarting device\n");

drivers/net/ethernet/mellanox/mlx4/en_main.c

309

mlx4_err(mdev, "Failed allocating memory region\n");

drivers/net/ethernet/mellanox/mlx4/en_main.c

314

mlx4_err(mdev, "Failed enabling memory region\n");

drivers/net/ethernet/mellanox/mlx4/en_main.c

361

mlx4_err(mdev, "Failed to create netdev notifier\n");

drivers/net/ethernet/mellanox/mlx4/eq.c

1142

mlx4_err(dev, "Couldn't map interrupt clear register, aborting\n");

drivers/net/ethernet/mellanox/mlx4/eq.c

777

mlx4_err(dev, "Temperature Threshold was reached! Threshold: %d celsius degrees; Current Temperature: %d\n",

drivers/net/ethernet/mellanox/mlx4/eq.c

949

mlx4_err(dev, "Couldn't map EQ doorbell for EQN 0x%06x\n",

drivers/net/ethernet/mellanox/mlx4/fw.c

1677

mlx4_err(dev, "Installed FW has unsupported command interface revision %d\n",

drivers/net/ethernet/mellanox/mlx4/fw.c

1679

mlx4_err(dev, "(Installed FW version is %d.%d.%03d)\n",

drivers/net/ethernet/mellanox/mlx4/fw.c

1683

mlx4_err(dev, "This driver version supports only revisions %d to %d\n",

drivers/net/ethernet/mellanox/mlx4/fw.c

2062

mlx4_err(dev, "INIT_HCA returns %d\n", err);

drivers/net/ethernet/mellanox/mlx4/fw.c

2663

mlx4_err(dev, "Fail to get port %d uplink guid\n",

drivers/net/ethernet/mellanox/mlx4/fw.c

2728

mlx4_err(dev, "Failed to allocate mailbox for GET_OP_REQ\n");

drivers/net/ethernet/mellanox/mlx4/fw.c

2738

mlx4_err(dev, "Failed to retrieve required operation: %d\n",

drivers/net/ethernet/mellanox/mlx4/fw.c

2788

mlx4_err(dev, "Failed to acknowledge required request: %d\n",

drivers/net/ethernet/mellanox/mlx4/fw.c

2955

mlx4_err(dev,

drivers/net/ethernet/mellanox/mlx4/fw.c

570

mlx4_err(dev, "The host supports neither eth nor rdma interfaces\n");

drivers/net/ethernet/mellanox/mlx4/fw.c

659

mlx4_err(dev, "VLAN is enforced on this port\n");

drivers/net/ethernet/mellanox/mlx4/fw.c

665

mlx4_err(dev, "Force mac is enabled on this port\n");

drivers/net/ethernet/mellanox/mlx4/fw.c

672

mlx4_err(dev, "phy_wqe_gid is enforced on this ib port\n");

drivers/net/ethernet/mellanox/mlx4/intf.c

172

mlx4_err(dev, "Fail to %s rx port check\n",

drivers/net/ethernet/mellanox/mlx4/intf.c

181

mlx4_err(dev, "Fail to reset port map\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1014

mlx4_err(dev, "HCA has %d ports, but we only support %d, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

1024

mlx4_err(dev, "Set special QP caps failed. aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1032

mlx4_err(dev, "HCA reported UAR region size of 0x%x bigger than PCI resource 2 size of 0x%llx, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

1117

mlx4_err(dev, "Failed to set port %d, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

1125

mlx4_err(dev, "Failed to register device\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1165

mlx4_err(mdev,

drivers/net/ethernet/mellanox/mlx4/main.c

1195

mlx4_err(mdev, "Auto sensing is not supported on this HCA. Set only 'eth' or 'ib' for both ports (should be the same)\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1240

mlx4_err(mdev, "%s is not supported port type\n", buf);

drivers/net/ethernet/mellanox/mlx4/main.c

1313

mlx4_err(mdev, "%s is invalid IBTA mtu\n", buf);

drivers/net/ethernet/mellanox/mlx4/main.c

1326

mlx4_err(mdev, "Failed to set port %d, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

1423

mlx4_err(dev, "Failed to bond device: %d\n", ret);

drivers/net/ethernet/mellanox/mlx4/main.c

1427

mlx4_err(dev, "bond for multifunction failed\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1452

mlx4_err(dev, "Failed to unbond device: %d\n", ret);

drivers/net/ethernet/mellanox/mlx4/main.c

1503

mlx4_err(dev, "Failed to change port map: %d\n", err);

drivers/net/ethernet/mellanox/mlx4/main.c

1527

mlx4_err(bond->dev, "Fail to bond device\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1532

mlx4_err(bond->dev,

drivers/net/ethernet/mellanox/mlx4/main.c

1540

mlx4_err(bond->dev, "Fail to unbond device\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1574

mlx4_err(dev, "Couldn't allocate FW area, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1580

mlx4_err(dev, "MAP_FA command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1586

mlx4_err(dev, "RUN_FW command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1669

mlx4_err(dev, "SET_ICM_SIZE command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1680

mlx4_err(dev, "Couldn't allocate aux memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1686

mlx4_err(dev, "MAP_ICM_AUX command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1692

mlx4_err(dev, "Failed to map cMPT context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1702

mlx4_err(dev, "Failed to map EQ context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1723

mlx4_err(dev, "Failed to map MTT context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1733

mlx4_err(dev, "Failed to map dMPT context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1744

mlx4_err(dev, "Failed to map QP context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1755

mlx4_err(dev, "Failed to map AUXC context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1766

mlx4_err(dev, "Failed to map ALTC context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1777

mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1787

mlx4_err(dev, "Failed to map CQ context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1797

mlx4_err(dev, "Failed to map SRQ context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

1815

mlx4_err(dev, "Failed to map MCG context memory, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2045

mlx4_err(dev, "Communication channel is offline.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2081

mlx4_err(dev, "PF is not responsive, skipping initialization\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2107

mlx4_err(dev, "slave driver version is not supported by the master\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2195

mlx4_err(dev, "DMFS high rate mode not supported\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2264

mlx4_err(dev,

drivers/net/ethernet/mellanox/mlx4/main.c

2271

mlx4_err(dev,

drivers/net/ethernet/mellanox/mlx4/main.c

2294

mlx4_err(dev, "QUERY_FW command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2300

mlx4_err(dev, "Failed to start FW, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2336

mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2349

mlx4_err(dev, "Fail to get physical port id\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2391

mlx4_err(dev, "INIT_HCA command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2398

mlx4_err(dev, "QUERY_FUNC command failed, aborting.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2414

mlx4_err(dev, "QUERY_HCA command failed, disable timestamp\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2426

mlx4_err(dev,

drivers/net/ethernet/mellanox/mlx4/main.c

2434

mlx4_err(dev, "Failed to map internal clock. Timestamping is not supported\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2459

mlx4_err(dev, "Failed to initialize slave\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2465

mlx4_err(dev, "Failed to obtain slave caps\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2479

mlx4_err(dev, "QUERY_ADAPTER command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2486

mlx4_err(dev, "Failed to query CONFIG_DEV parameters\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2584

mlx4_err(dev, "%s: failed to allocate default counter port %d err %d\n",

drivers/net/ethernet/mellanox/mlx4/main.c

2729

mlx4_err(dev, "Failed to initialize user access region table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2735

mlx4_err(dev, "Failed to allocate driver access region, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2741

mlx4_err(dev, "Couldn't map kernel access region, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2748

mlx4_err(dev, "Failed to initialize protection domain table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2754

mlx4_err(dev, "Failed to initialize reliable connection domain table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2760

mlx4_err(dev, "Failed to initialize memory region table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2767

mlx4_err(dev, "Failed to initialize multicast group table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2772

mlx4_err(dev, "Failed in config_mad_demux, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2779

mlx4_err(dev, "Failed to initialize event queue table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2785

mlx4_err(dev, "Failed to switch to event-driven firmware commands, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2796

mlx4_err(dev, "NOP command failed to generate interrupt (IRQ %d), aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

2798

mlx4_err(dev, "BIOS or ACPI interrupt routing problem?\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2808

mlx4_err(dev, "Failed to initialize completion queue table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2814

mlx4_err(dev, "Failed to initialize shared receive queue table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2820

mlx4_err(dev, "Failed to initialize queue pair table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2827

mlx4_err(dev, "Failed to initialize counters table, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2834

mlx4_err(dev, "Failed to allocate default counters, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

2867

mlx4_err(dev, "Failed to set port %d, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

3120

mlx4_err(dev, "Failed to create file for port %d\n", port);

drivers/net/ethernet/mellanox/mlx4/main.c

314

mlx4_err(dev, "Only same port types supported on this HCA, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3141

mlx4_err(dev, "Failed to create mtu file for port %d\n", port);

drivers/net/ethernet/mellanox/mlx4/main.c

322

mlx4_err(dev, "Requested port type for port %d is not supported on this HCA\n",

drivers/net/ethernet/mellanox/mlx4/main.c

3241

mlx4_err(dev, "Failed to obtain ownership bit\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3261

mlx4_err(dev, "Failed to obtain ownership bit\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3290

mlx4_err(dev, "SR-IOV was already enabled, but with num_vfs (%d) different than requested (%d)\n",

drivers/net/ethernet/mellanox/mlx4/main.c

3298

mlx4_err(dev, "Failed to allocate memory for VFs\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3304

mlx4_err(dev, "requested vfs (%d) > available vfs (%d). Continuing without SR_IOV\n",

drivers/net/ethernet/mellanox/mlx4/main.c

3313

mlx4_err(dev, "Failed to enable SR-IOV, continuing without SR-IOV (err = %d)\n",

drivers/net/ethernet/mellanox/mlx4/main.c

3345

mlx4_err(dev, "Requested %d VFs, but FW does not support more than 64\n",

drivers/net/ethernet/mellanox/mlx4/main.c

3444

mlx4_err(dev, "Failed to reset HCA, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3465

mlx4_err(dev, "Failed to init command interface, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3480

mlx4_err(dev, "Failed to init slave mfunc interface, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3488

mlx4_err(dev, "Failed to init fw, aborting.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

350

mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3504

mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3521

mlx4_err(dev, "Invalid SRIOV state\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3526

mlx4_err(dev, "Failed to reset HCA, aborting.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3539

mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3583

mlx4_err(dev, "Failed to init VHCR command interface, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3591

mlx4_err(dev, "Invalid SRIOV state\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3610

mlx4_err(dev,

drivers/net/ethernet/mellanox/mlx4/main.c

3634

mlx4_err(dev, "Failed to init master mfunc interface, aborting.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3650

mlx4_err(dev, "INTx is not supported in multi-function mode, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

3680

mlx4_err(dev, " Failed to arm comm channel eq: %x\n",

drivers/net/ethernet/mellanox/mlx4/main.c

4007

mlx4_err(persist->dev, "mlx4_restart_one_up failed, ret=%d\n",

drivers/net/ethernet/mellanox/mlx4/main.c

4257

mlx4_err(dev, "%s: ERROR: mlx4_load_one failed, pci_name=%s, err=%d\n",

drivers/net/ethernet/mellanox/mlx4/main.c

4265

mlx4_err(dev, "could not restore original port types (%d)\n",

drivers/net/ethernet/mellanox/mlx4/main.c

431

mlx4_err(dev, "QUERY_PORT command failed.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4336

mlx4_err(persist->dev, "mlx4_pci_err_detected was called\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4360

mlx4_err(dev, "mlx4_pci_slot_reset was called\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4363

mlx4_err(dev, "Can not re-enable device, err=%d\n", err);

drivers/net/ethernet/mellanox/mlx4/main.c

4382

mlx4_err(dev, "%s was called\n", __func__);

drivers/net/ethernet/mellanox/mlx4/main.c

4393

mlx4_err(dev, "%s: mlx4_load_one failed, err=%d\n",

drivers/net/ethernet/mellanox/mlx4/main.c

4402

mlx4_err(dev, "could not restore original port types (%d)\n", err);

drivers/net/ethernet/mellanox/mlx4/main.c

4439

mlx4_err(dev, "suspend was called\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4462

mlx4_err(dev, "resume was called\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4477

mlx4_err(dev, "resume: could not restore original port types (%d)\n", ret);

drivers/net/ethernet/mellanox/mlx4/main.c

463

mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

469

mlx4_err(dev, "HCA minimum page size of %d bigger than kernel PAGE_SIZE of %ld, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

474

mlx4_err(dev, "HCA has %d ports, but we only support %d, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

480

mlx4_err(dev, "HCA reported UAR size of 0x%x bigger than PCI resource 2 size of 0x%llx, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

495

mlx4_err(dev, "QUERY_PORT command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

874

mlx4_err(dev, "Failed to allocate memory for special qps cap\n");

drivers/net/ethernet/mellanox/mlx4/main.c

882

mlx4_err(dev, "QUERY_FUNC_CAP port command failed for port %d, aborting (%d)\n",

drivers/net/ethernet/mellanox/mlx4/main.c

893

mlx4_err(dev, "QUERY_PORT command failed for port %d, aborting (%d)\n",

drivers/net/ethernet/mellanox/mlx4/main.c

918

mlx4_err(dev, "Failed to allocate memory for slave_cap\n");

drivers/net/ethernet/mellanox/mlx4/main.c

925

mlx4_err(dev, "QUERY_HCA command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

933

mlx4_err(dev, "Unknown hca global capabilities\n");

drivers/net/ethernet/mellanox/mlx4/main.c

943

mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n");

drivers/net/ethernet/mellanox/mlx4/main.c

949

mlx4_err(dev, "QUERY_FW command failed: could not get FW version\n");

drivers/net/ethernet/mellanox/mlx4/main.c

954

mlx4_err(dev, "HCA minimum page size of %d bigger than kernel PAGE_SIZE of %ld, aborting\n",

drivers/net/ethernet/mellanox/mlx4/main.c

965

mlx4_err(dev,

drivers/net/ethernet/mellanox/mlx4/main.c

982

mlx4_err(dev, "QUERY_FUNC_CAP general command failed, aborting (%d)\n",

drivers/net/ethernet/mellanox/mlx4/main.c

989

mlx4_err(dev, "Unknown pf context behaviour %x known flags %x\n",

drivers/net/ethernet/mellanox/mlx4/mcg.c

1043

mlx4_err(dev, "Fail to detach network rule. registration id = 0x%llx\n",

drivers/net/ethernet/mellanox/mlx4/mcg.c

1140

mlx4_err(dev, "No AMGM entries left\n");

drivers/net/ethernet/mellanox/mlx4/mcg.c

1153

mlx4_err(dev, "MGM at index %x is full\n", index);

drivers/net/ethernet/mellanox/mlx4/mcg.c

1240

mlx4_err(dev, "MGID %pI6 not found\n", gid);

drivers/net/ethernet/mellanox/mlx4/mcg.c

1261

mlx4_err(dev, "QP %06x not found in MGM\n", qp->qpn);

drivers/net/ethernet/mellanox/mlx4/mcg.c

643

mlx4_err(dev, "QP %06x wasn't found in entry %d\n",

drivers/net/ethernet/mellanox/mlx4/mcg.c

732

mlx4_err(dev, "Found zero MGID in AMGM\n");

drivers/net/ethernet/mellanox/mlx4/mcg.c

764

mlx4_err(dev, "Invalid flow type. type = %d\n", flow_type);

drivers/net/ethernet/mellanox/mlx4/mcg.c

801

mlx4_err(dev, "Invalid network rule id. id = %d\n", id);

drivers/net/ethernet/mellanox/mlx4/mcg.c

828

mlx4_err(dev, "Invalid network rule id. id = %d\n", id);

drivers/net/ethernet/mellanox/mlx4/mcg.c

908

mlx4_err(dev, "%s", str);

drivers/net/ethernet/mellanox/mlx4/mcg.c

971

mlx4_err(dev, "%s", buf);

drivers/net/ethernet/mellanox/mlx4/mcg.c

974

mlx4_err(dev, "Network rule error message was truncated, print buffer is too small\n");

drivers/net/ethernet/mellanox/mlx4/pd.c

280

mlx4_err(

drivers/net/ethernet/mellanox/mlx4/pd.c

283

mlx4_err(dev, "Increase firmware log2_uar_bar_megabytes?\n");

drivers/net/ethernet/mellanox/mlx4/port.c

2131

mlx4_err(dev, "Module ID not recognized: %#x\n", module_id);

drivers/net/ethernet/mellanox/mlx4/port.c

283

mlx4_err(dev, "Failed adding MAC: 0x%llx\n",

drivers/net/ethernet/mellanox/mlx4/port.c

485

mlx4_err(dev, "Failed adding MAC: 0x%llx\n",

drivers/net/ethernet/mellanox/mlx4/port.c

494

mlx4_err(dev, "Failed adding duplicate MAC: 0x%llx\n",

drivers/net/ethernet/mellanox/mlx4/profile.c

163

mlx4_err(dev, "Profile requires 0x%llx bytes; won't fit in 0x%llx bytes of context memory\n",

drivers/net/ethernet/mellanox/mlx4/qp.c

837

mlx4_err(dev, "Number of reserved QPs is higher than number of QPs\n");

drivers/net/ethernet/mellanox/mlx4/qp.c

939

mlx4_err(dev, "Failed to bring QP to state: %d with error: %d\n",

drivers/net/ethernet/mellanox/mlx4/reset.c

112

mlx4_err(dev, "Failed to obtain HW semaphore, aborting\n");

drivers/net/ethernet/mellanox/mlx4/reset.c

136

mlx4_err(dev, "PCI device did not come back after reset, aborting\n");

drivers/net/ethernet/mellanox/mlx4/reset.c

147

mlx4_err(dev, "Couldn't restore HCA PCI Express Device Control register, aborting\n");

drivers/net/ethernet/mellanox/mlx4/reset.c

155

mlx4_err(dev, "Couldn't restore HCA PCI Express Link control register, aborting\n");

drivers/net/ethernet/mellanox/mlx4/reset.c

167

mlx4_err(dev, "Couldn't restore HCA reg %x, aborting\n",

drivers/net/ethernet/mellanox/mlx4/reset.c

176

mlx4_err(dev, "Couldn't restore HCA COMMAND, aborting\n");

drivers/net/ethernet/mellanox/mlx4/reset.c

75

mlx4_err(dev, "Couldn't allocate memory to save HCA PCI header, aborting\n");

drivers/net/ethernet/mellanox/mlx4/reset.c

87

mlx4_err(dev, "Couldn't save HCA PCI header, aborting\n");

drivers/net/ethernet/mellanox/mlx4/reset.c

97

mlx4_err(dev, "Couldn't map HCA reset register, aborting\n");

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

1022

mlx4_err(dev, "%s: failed to create new counter for slave %d err %d\n",

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

3243

mlx4_err(dev, "%s: unprivileged slave %d attempting to create an MLX proxy special QP on port %d\n",

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4311

mlx4_err(dev, "Updating qpn 0x%x for slave %d rejected\n", qpn, slave);

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4323

mlx4_err(dev, "Failed to update qpn 0x%x, MAC is invalid. smac_ix: %d\n",

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4334

mlx4_err(dev, "Failed to update qpn on qpn 0x%x, command failed\n", qpn);

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4435

mlx4_err(dev, "Fail to add flow steering resources\n");

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4484

mlx4_err(dev, "Fail to remove flow steering resources\n");

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4514

mlx4_err(dev, "Mirror rules cannot be removed explicitly\n");

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4531

mlx4_err(dev, "Fail to get resource of mirror rule\n");

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4539

mlx4_err(dev, "Fail to remove flow steering resources\n");

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4982

mlx4_err(dev, "rule mirroring mailbox is null\n");

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

5402

mlx4_err(dev, "%d UPDATE_QP failures for slave %d, port %d\n",

drivers/net/ethernet/mellanox/mlx4/sense.c

107

mlx4_err(dev, "Failed to change port_types\n");

drivers/net/ethernet/mellanox/mlx4/sense.c

51

mlx4_err(dev, "Sense command failed for port: %d\n", port);

drivers/net/ethernet/mellanox/mlx4/sense.c

56

mlx4_err(dev, "Sense returned illegal value: 0x%llx\n", out_param);